Enable Coldfire QSPI support when SPI_COLDFIRE_QSPI is built as a module.
This version of the patch combines changes to the config files and device.c
and uses IF_ENABLED (thanks to Sam Ravnborg for the suggestion).
Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
/***************************************************************************/
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m520x_qspi_init(void)
{
writew(par, MCF_GPIO_PAR_UART);
}
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
/***************************************************************************/
mach_sched_init = hw_timer_init;
m520x_uarts_init();
m520x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m520x_qspi_init();
#endif
}
/***************************************************************************/
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m523x_qspi_init(void)
{
writew(par, MCFGPIO_PAR_TIMER);
}
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
/***************************************************************************/
{
mach_sched_init = hw_timer_init;
m523x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m523x_qspi_init();
#endif
}
/***************************************************************************/
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m5249_qspi_init(void)
{
mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
}
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
/***************************************************************************/
#ifdef CONFIG_M5249C3
m5249_smc91x_init();
#endif
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m5249_qspi_init();
#endif
}
/***************************************************************************/
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m527x_qspi_init(void)
{
#endif
}
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
/***************************************************************************/
mach_sched_init = hw_timer_init;
m527x_uarts_init();
m527x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m527x_qspi_init();
#endif
}
/***************************************************************************/
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m528x_qspi_init(void)
{
__raw_writeb(0x07, MCFGPIO_PQSPAR);
}
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
/***************************************************************************/
mach_sched_init = hw_timer_init;
m528x_uarts_init();
m528x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m528x_qspi_init();
#endif
}
/***************************************************************************/
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m532x_qspi_init(void)
{
writew(0x01f0, MCF_GPIO_PAR_QSPI);
}
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
/***************************************************************************/
mach_sched_init = hw_timer_init;
m532x_uarts_init();
m532x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m532x_qspi_init();
#endif
#endif /* MCFFEC_BASE1 */
#endif /* CONFIG_FEC */
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
/*
* The ColdFire QSPI module is an SPI protocol hardware block used
* on a number of different ColdFire CPUs.
.resource = mcf_qspi_resources,
.dev.platform_data = &mcf_qspi_data,
};
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
static struct platform_device *mcf_devices[] __initdata = {
&mcf_uart,
&mcf_fec1,
#endif
#endif
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
&mcf_qspi,
#endif
};