#include "e1000_mac.h"
#include "e1000_82575.h"
#include "e1000_i210.h"
+#include "igb.h"
static s32 igb_get_invariants_82575(struct e1000_hw *);
static s32 igb_acquire_phy_82575(struct e1000_hw *);
static const u16 e1000_82580_rxpbs_table[] = {
36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 };
+/* Due to a hw errata, if the host tries to configure the VFTA register
+ * while performing queries from the BMC or DMA, then the VFTA in some
+ * cases won't be written.
+ */
+
+/**
+ * igb_write_vfta_i350 - Write value to VLAN filter table
+ * @hw: pointer to the HW structure
+ * @offset: register offset in VLAN filter table
+ * @value: register value written to VLAN filter table
+ *
+ * Writes value at the given offset in the register array which stores
+ * the VLAN filter table.
+ **/
+static void igb_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ struct igb_adapter *adapter = hw->back;
+ int i;
+
+ for (i = 10; i--;)
+ array_wr32(E1000_VFTA, offset, value);
+
+ wrfl();
+ adapter->shadow_vfta[offset] = value;
+}
+
/**
* igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
* @hw: pointer to the HW structure
mac->ops.release_swfw_sync = igb_release_swfw_sync_82575;
}
+ if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354))
+ mac->ops.write_vfta = igb_write_vfta_i350;
+ else
+ mac->ops.write_vfta = igb_write_vfta;
+
/* Set if part includes ASF firmware */
mac->asf_firmware_present = true;
/* Set if manageability features are enabled. */
/* Disabling VLAN filtering */
hw_dbg("Initializing the IEEE VLAN\n");
- if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354))
- igb_clear_vfta_i350(hw);
- else
- igb_clear_vfta(hw);
+ igb_clear_vfta(hw);
/* Setup the receive address */
igb_init_rx_addrs(hw, rar_count);
{
u32 offset;
- for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
- array_wr32(E1000_VFTA, offset, 0);
- wrfl();
- }
+ for (offset = E1000_VLAN_FILTER_TBL_SIZE; offset--;)
+ hw->mac.ops.write_vfta(hw, offset, 0);
}
/**
* Writes value at the given offset in the register array which stores
* the VLAN filter table.
**/
-static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
{
+ struct igb_adapter *adapter = hw->back;
+
array_wr32(E1000_VFTA, offset, value);
wrfl();
-}
-
-/* Due to a hw errata, if the host tries to configure the VFTA register
- * while performing queries from the BMC or DMA, then the VFTA in some
- * cases won't be written.
- */
-
-/**
- * igb_clear_vfta_i350 - Clear VLAN filter table
- * @hw: pointer to the HW structure
- *
- * Clears the register array which contains the VLAN filter table by
- * setting all the values to 0.
- **/
-void igb_clear_vfta_i350(struct e1000_hw *hw)
-{
- u32 offset;
- int i;
-
- for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
- for (i = 0; i < 10; i++)
- array_wr32(E1000_VFTA, offset, 0);
-
- wrfl();
- }
-}
-
-/**
- * igb_write_vfta_i350 - Write value to VLAN filter table
- * @hw: pointer to the HW structure
- * @offset: register offset in VLAN filter table
- * @value: register value written to VLAN filter table
- *
- * Writes value at the given offset in the register array which stores
- * the VLAN filter table.
- **/
-static void igb_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value)
-{
- int i;
- for (i = 0; i < 10; i++)
- array_wr32(E1000_VFTA, offset, value);
-
- wrfl();
+ adapter->shadow_vfta[offset] = value;
}
/**
/**
* igb_vfta_set - enable or disable vlan in VLAN filter table
* @hw: pointer to the HW structure
- * @vid: VLAN id to add or remove
- * @add: if true add filter, if false remove
+ * @vlan: VLAN id to add or remove
+ * @vlan_on: if true add filter, if false remove
*
* Sets or clears a bit in the VLAN filter table array based on VLAN id
* and if we are adding or removing the filter
**/
-s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add)
+s32 igb_vfta_set(struct e1000_hw *hw, u32 vlan, bool vlan_on)
{
- u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK;
- u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
- u32 vfta;
struct igb_adapter *adapter = hw->back;
- s32 ret_val = 0;
+ u32 regidx, vfta_delta, vfta;
+
+ if (vlan > 4095)
+ return E1000_ERR_PARAM;
+
+ /* Part 1
+ * The VFTA is a bitstring made up of 128 32-bit registers
+ * that enable the particular VLAN id, much like the MTA:
+ * bits[11-5]: which register
+ * bits[4-0]: which bit in the register
+ */
+ regidx = vlan / 32;
+ vfta_delta = 1 << (vlan % 32);
+ vfta = adapter->shadow_vfta[regidx];
- vfta = adapter->shadow_vfta[index];
+ /* vfta_delta represents the difference between the current value
+ * of vfta and the value we want in the register. Since the diff
+ * is an XOR mask we can just update vfta using an XOR.
+ */
+ vfta_delta &= vlan_on ? ~vfta : vfta;
+ vfta ^= vfta_delta;
/* bit was set/cleared before we started */
- if ((!!(vfta & mask)) == add) {
- ret_val = -E1000_ERR_CONFIG;
- } else {
- if (add)
- vfta |= mask;
- else
- vfta &= ~mask;
- }
- if ((hw->mac.type == e1000_i350) || (hw->mac.type == e1000_i354))
- igb_write_vfta_i350(hw, index, vfta);
- else
- igb_write_vfta(hw, index, vfta);
- adapter->shadow_vfta[index] = vfta;
+ if (vfta_delta)
+ hw->mac.ops.write_vfta(hw, regidx, vfta);
- return ret_val;
+ return 0;
}
/**
projects / platform / kernel / linux-exynos.git / commitdiff