leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver

The device provides 6 channels which can be individually
turned off and on but groups of two channels share a common brightness
register.

Limitation: The GPIO to enable the device is not used yet.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419111806.1100437-3-andreas@kemnade.info

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index aaa9140..2c5fdf8 100644 (file)
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -551,6 +551,20 @@ config LEDS_REGULATOR
        help
          This option enables support for regulator driven LEDs.
 
+config LEDS_BD2606MVV
+       tristate "LED driver for BD2606MVV"
+       depends on LEDS_CLASS
+       depends on I2C
+       select REGMAP_I2C
+       help
+         This option enables support for BD2606MVV LED driver chips
+         accessed via the I2C bus. It supports setting brightness, with
+         the limitiation that there are groups of two channels sharing
+         a brightness setting, but not the on/off setting.
+
+         To compile this driver as a module, choose M here: the module will
+         be called leds-bd2606mvv.
+
 config LEDS_BD2802
        tristate "LED driver for BD2802 RGB LED"
        depends on LEDS_CLASS

diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d30395d..c07d151 100644 (file)
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_LEDS_ARIEL)              += leds-ariel.o
 obj-$(CONFIG_LEDS_AW2013)              += leds-aw2013.o
 obj-$(CONFIG_LEDS_BCM6328)             += leds-bcm6328.o
 obj-$(CONFIG_LEDS_BCM6358)             += leds-bcm6358.o
+obj-$(CONFIG_LEDS_BD2606MVV)           += leds-bd2606mvv.o
 obj-$(CONFIG_LEDS_BD2802)              += leds-bd2802.o
 obj-$(CONFIG_LEDS_BLINKM)              += leds-blinkm.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)          += leds-clevo-mail.o

diff --git a/drivers/leds/leds-bd2606mvv.c b/drivers/leds/leds-bd2606mvv.c
new file mode 100644 (file)
index 0000000..76f9d4d
--- /dev/null
+++ b/drivers/leds/leds-bd2606mvv.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Andreas Kemnade
+ *
+ * Datasheet:
+ * https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
+ *
+ * If LED brightness cannot be controlled independently due to shared
+ * brightness registers, max_brightness is set to 1 and only on/off
+ * is possible for the affected LED pair.
+ */
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define BD2606_MAX_LEDS 6
+#define BD2606_MAX_BRIGHTNESS 63
+#define BD2606_REG_PWRCNT 3
+#define ldev_to_led(c) container_of(c, struct bd2606mvv_led, ldev)
+
+struct bd2606mvv_led {
+       unsigned int led_no;
+       struct led_classdev ldev;
+       struct bd2606mvv_priv *priv;
+};
+
+struct bd2606mvv_priv {
+       struct bd2606mvv_led leds[BD2606_MAX_LEDS];
+       struct regmap *regmap;
+};
+
+static int
+bd2606mvv_brightness_set(struct led_classdev *led_cdev,
+                     enum led_brightness brightness)
+{
+       struct bd2606mvv_led *led = ldev_to_led(led_cdev);
+       struct bd2606mvv_priv *priv = led->priv;
+       int err;
+
+       if (brightness == 0)
+               return regmap_update_bits(priv->regmap,
+                                         BD2606_REG_PWRCNT,
+                                         1 << led->led_no,
+                                         0);
+
+       /* shared brightness register */
+       err = regmap_write(priv->regmap, led->led_no / 2,
+                          led_cdev->max_brightness == 1 ?
+                          BD2606_MAX_BRIGHTNESS : brightness);
+       if (err)
+               return err;
+
+       return regmap_update_bits(priv->regmap,
+                                 BD2606_REG_PWRCNT,
+                                 1 << led->led_no,
+                                 1 << led->led_no);
+}
+
+static const struct regmap_config bd2606mvv_regmap = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .max_register = 0x3,
+};
+
+static int bd2606mvv_probe(struct i2c_client *client)
+{
+       struct fwnode_handle *np, *child;
+       struct device *dev = &client->dev;
+       struct bd2606mvv_priv *priv;
+       struct fwnode_handle *led_fwnodes[BD2606_MAX_LEDS] = { 0 };
+       int active_pairs[BD2606_MAX_LEDS / 2] = { 0 };
+       int err, reg;
+       int i;
+
+       np = dev_fwnode(dev);
+       if (!np)
+               return -ENODEV;
+
+       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       priv->regmap = devm_regmap_init_i2c(client, &bd2606mvv_regmap);
+       if (IS_ERR(priv->regmap)) {
+               err = PTR_ERR(priv->regmap);
+               dev_err(dev, "Failed to allocate register map: %d\n", err);
+               return err;
+       }
+
+       i2c_set_clientdata(client, priv);
+
+       fwnode_for_each_available_child_node(np, child) {
+               struct bd2606mvv_led *led;
+
+               err = fwnode_property_read_u32(child, "reg", &reg);
+               if (err) {
+                       fwnode_handle_put(child);
+                       return err;
+               }
+               if (reg < 0 || reg >= BD2606_MAX_LEDS || led_fwnodes[reg]) {
+                       fwnode_handle_put(child);
+                       return -EINVAL;
+               }
+               led = &priv->leds[reg];
+               led_fwnodes[reg] = child;
+               active_pairs[reg / 2]++;
+               led->priv = priv;
+               led->led_no = reg;
+               led->ldev.brightness_set_blocking = bd2606mvv_brightness_set;
+               led->ldev.max_brightness = BD2606_MAX_BRIGHTNESS;
+       }
+
+       for (i = 0; i < BD2606_MAX_LEDS; i++) {
+               struct led_init_data init_data = {};
+
+               if (!led_fwnodes[i])
+                       continue;
+
+               init_data.fwnode = led_fwnodes[i];
+               /* Check whether brightness can be independently adjusted. */
+               if (active_pairs[i / 2] == 2)
+                       priv->leds[i].ldev.max_brightness = 1;
+
+               err = devm_led_classdev_register_ext(dev,
+                                                    &priv->leds[i].ldev,
+                                                    &init_data);
+               if (err < 0) {
+                       fwnode_handle_put(child);
+                       return dev_err_probe(dev, err,
+                                            "couldn't register LED %s\n",
+                                            priv->leds[i].ldev.name);
+               }
+       }
+       return 0;
+}
+
+static const struct of_device_id __maybe_unused of_bd2606mvv_leds_match[] = {
+       { .compatible = "rohm,bd2606mvv", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, of_bd2606mvv_leds_match);
+
+static struct i2c_driver bd2606mvv_driver = {
+       .driver   = {
+               .name    = "leds-bd2606mvv",
+               .of_match_table = of_match_ptr(of_bd2606mvv_leds_match),
+       },
+       .probe_new = bd2606mvv_probe,
+};
+
+module_i2c_driver(bd2606mvv_driver);
+
+MODULE_AUTHOR("Andreas Kemnade <andreas@kemnade.info>");
+MODULE_DESCRIPTION("BD2606 LED driver");
+MODULE_LICENSE("GPL");