--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ soc {
+ prcmu@80157000 {
+ ab8500 {
+ ab8500-gpio {
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_default_mode>,
+ <&gpio4_default_mode>,
+ <&gpio10_default_mode>,
+ <&gpio11_default_mode>,
+ <&gpio12_default_mode>,
+ <&gpio13_default_mode>,
+ <&gpio16_default_mode>,
+ <&gpio24_default_mode>,
+ <&gpio25_default_mode>,
+ <&gpio36_default_mode>,
+ <&gpio37_default_mode>,
+ <&gpio38_default_mode>,
+ <&gpio39_default_mode>,
+ <&gpio42_default_mode>,
+ <&gpio26_default_mode>,
+ <&gpio35_default_mode>;
+
+ /*
+ * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+ * are muxed in as GPIO, and configured as INPUT PULL DOWN
+ */
+ gpio2 {
+ gpio2_default_mode: gpio2_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio2_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO2_T9";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio4 {
+ gpio4_default_mode: gpio4_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio4_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO4_W2";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio10 {
+ gpio10_default_mode: gpio10_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio10_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO10_U17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio11 {
+ gpio11_default_mode: gpio11_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio11_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO11_AA18";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio12 {
+ gpio12_default_mode: gpio12_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio12_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO12_U16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio13 {
+ gpio13_default_mode: gpio13_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio13_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO13_W17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio16 {
+ gpio16_default_mode: gpio16_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio16_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO16_F15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio24 {
+ gpio24_default_mode: gpio24_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio24_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO24_T14";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio25 {
+ gpio25_default_mode: gpio25_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio25_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO25_R16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio36 {
+ gpio36_default_mode: gpio36_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio36_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO36_A17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio37 {
+ gpio37_default_mode: gpio37_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio37_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO37_E15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio38 {
+ gpio38_default_mode: gpio38_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio38_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO38_C17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio39 {
+ gpio39_default_mode: gpio39_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio39_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO39_E16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio42 {
+ gpio42_default_mode: gpio42_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio42_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO42_U2";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /*
+ * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+ */
+ gpio26 {
+ gpio26_default_mode: gpio26_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio26_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO26_M16";
+ output-low;
+ };
+ };
+ };
+ gpio35 {
+ gpio35_default_mode: gpio35_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio35_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO35_W15";
+ output-low;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
+};
/* These simply sets bias for pins */
#define BIAS(a,b) static unsigned long a[] = { b }
-BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0));
BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
AB8500_MUX_STATE("gpio1_a_1", "gpio", "regulator.35", PINCTRL_STATE_SLEEP),
AB8500_PIN_STATE("GPIO1_T10", in_pd, "regulator.35", PINCTRL_STATE_SLEEP),
- /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
- AB8500_MUX_HOG("gpio2_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO2_T9", in_pd),
-
/* Sysclkreq4 */
AB8500_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
AB8500_PIN_STATE("GPIO3_U9", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
- /* pins 4 is muxed in GPIO, configured in INPUT PULL DOWN */
- AB8500_MUX_HOG("gpio4_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO4_W2", in_pd),
-
/*
* pins 6,7,8 and 9 are muxed in YCBCR0123
* configured in INPUT PULL UP
AB8500_PIN_HOG("GPIO9_AA19", in_nopull),
/*
- * pins 10,11,12 and 13 are muxed in GPIO
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio10_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO10_U17", in_pd),
-
- AB8500_MUX_HOG("gpio11_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO11_AA18", in_pd),
-
- AB8500_MUX_HOG("gpio12_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO12_U16", in_pd),
-
- AB8500_MUX_HOG("gpio13_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO13_W17", in_pd),
-
- /*
* pins 14,15 are muxed in PWM1 and PWM2
* configured in INPUT PULL DOWN
*/
AB8500_PIN_HOG("GPIO15_B17", in_pd),
/*
- * pins 16 is muxed in GPIO
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio16_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO14_F14", in_pd),
-
- /*
* pins 17,18,19 and 20 are muxed in AUDIO interface 1
* configured in INPUT PULL DOWN
*/
AB8500_PIN_HOG("GPIO23_G19", in_pd),
/*
- * pins 24,25 are muxed in GPIO
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio24_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO24_T14", in_pd),
-
- AB8500_MUX_HOG("gpio25_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO25_R16", in_pd),
-
- /*
- * pins 26 is muxed in GPIO
- * configured in OUTPUT LOW
- */
- AB8500_MUX_HOG("gpio26_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO26_M16", out_lo),
-
- /*
* pins 27,28 are muxed in DMIC12
* configured in INPUT PULL DOWN
*/
AB8500_PIN_HOG("GPIO34_R17", in_pd),
/*
- * pins 35 is muxed in GPIO
- * configured in OUTPUT LOW
- */
- AB8500_MUX_HOG("gpio35_d_1", "gpio"),
- AB8500_PIN_HOG("GPIO35_W15", in_pd),
-
- /*
- * pins 36,37,38 and 39 are muxed in GPIO
- * configured in INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio36_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO36_A17", in_pd),
-
- AB8500_MUX_HOG("gpio37_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO37_E15", in_pd),
-
- AB8500_MUX_HOG("gpio38_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO38_C17", in_pd),
-
- AB8500_MUX_HOG("gpio39_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO39_E16", in_pd),
-
- /*
* pins 40 and 41 are muxed in MODCSLSDA
* configured INPUT PULL DOWN
*/
AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"),
AB8500_PIN_HOG("GPIO40_T19", in_pd),
AB8500_PIN_HOG("GPIO41_U19", in_pd),
-
- /*
- * pins 42 is muxed in GPIO
- * configured INPUT PULL DOWN
- */
- AB8500_MUX_HOG("gpio42_a_1", "gpio"),
- AB8500_PIN_HOG("GPIO42_U2", in_pd),
};
static struct pinctrl_map __initdata ab8505_pinmap[] = {
projects / platform / kernel / linux-rpi.git / commitdiff