staging: dwc2: set up all module params
authorStephen Warren <swarren@wwwdotorg.org>
Wed, 27 Nov 2013 01:58:01 +0000 (18:58 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 3 Dec 2013 17:01:45 +0000 (09:01 -0800)
The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non-
default parameters. Select these based on the compatible value from the
DT node. For all other HW, fall back to the default parameters currently
in use.

The values in params_bcm2835[] were posted to the mailing list by Paul
quite some time ago. I made a couple of minor modifications since then;
to set ahbcfg instead of ahb_single, and to set uframe_sched.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/devicetree/bindings/staging/dwc2.txt
drivers/staging/dwc2/platform.c

index 1a1b7cf..8b60e90 100644 (file)
@@ -2,7 +2,9 @@ Platform DesignWare HS OTG USB 2.0 controller
 -----------------------------------------------------
 
 Required properties:
-- compatible : "snps,dwc2"
+- compatible : One of:
+  - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
+  - snps,dwc2: A generic DWC2 USB controller with default parameters.
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
 
index 4d9fac0..28a78fe 100644 (file)
@@ -39,6 +39,7 @@
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 
 #include "core.h"
 
 static const char dwc2_driver_name[] = "dwc2";
 
+static const struct dwc2_core_params params_bcm2835 = {
+       .otg_cap                        = 0,    /* HNP/SRP capable */
+       .otg_ver                        = 0,    /* 1.3 */
+       .dma_enable                     = 1,
+       .dma_desc_enable                = 0,
+       .speed                          = 0,    /* High Speed */
+       .enable_dynamic_fifo            = 1,
+       .en_multiple_tx_fifo            = 1,
+       .host_rx_fifo_size              = 774,  /* 774 DWORDs */
+       .host_nperio_tx_fifo_size       = 256,  /* 256 DWORDs */
+       .host_perio_tx_fifo_size        = 512,  /* 512 DWORDs */
+       .max_transfer_size              = 65535,
+       .max_packet_count               = 511,
+       .host_channels                  = 8,
+       .phy_type                       = 1,    /* UTMI */
+       .phy_utmi_width                 = 8,    /* 8 bits */
+       .phy_ulpi_ddr                   = 0,    /* Single */
+       .phy_ulpi_ext_vbus              = 0,
+       .i2c_enable                     = 0,
+       .ulpi_fs_ls                     = 0,
+       .host_support_fs_ls_low_power   = 0,
+       .host_ls_low_power_phy_clk      = 0,    /* 48 MHz */
+       .ts_dline                       = 0,
+       .reload_ctl                     = 0,
+       .ahbcfg                         = 0x10,
+       .uframe_sched                   = 1,
+};
+
 /**
  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
  * DWC_otg driver
@@ -66,6 +95,13 @@ static int dwc2_driver_remove(struct platform_device *dev)
        return 0;
 }
 
+static const struct of_device_id dwc2_of_match_table[] = {
+       { .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+       { .compatible = "snps,dwc2", .data = NULL },
+       {},
+};
+MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
+
 /**
  * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
  * driver
@@ -80,14 +116,22 @@ static int dwc2_driver_remove(struct platform_device *dev)
  */
 static int dwc2_driver_probe(struct platform_device *dev)
 {
+       const struct of_device_id *match;
+       const struct dwc2_core_params *params;
+       struct dwc2_core_params defparams;
        struct dwc2_hsotg *hsotg;
        struct resource *res;
        int retval;
        int irq;
-       struct dwc2_core_params params;
 
-       /* Default all params to autodetect */
-       dwc2_set_all_params(&params, -1);
+       match = of_match_device(dwc2_of_match_table, &dev->dev);
+       if (match && match->data) {
+               params = match->data;
+       } else {
+               /* Default all params to autodetect */
+               dwc2_set_all_params(&defparams, -1);
+               params = &defparams;
+       }
 
        hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
        if (!hsotg)
@@ -118,7 +162,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
        dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
                (unsigned long)res->start, hsotg->regs);
 
-       retval = dwc2_hcd_init(hsotg, irq, &params);
+       retval = dwc2_hcd_init(hsotg, irq, params);
        if (retval)
                return retval;
 
@@ -127,12 +171,6 @@ static int dwc2_driver_probe(struct platform_device *dev)
        return retval;
 }
 
-static const struct of_device_id dwc2_of_match_table[] = {
-       { .compatible = "snps,dwc2" },
-       {},
-};
-MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
-
 static struct platform_driver dwc2_platform_driver = {
        .driver = {
                .name = dwc2_driver_name,