/*
- * (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering,
+ * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering,
* wd@denx.de.
*
* See file CREDITS for list of people who contributed to this project.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
#ifndef __CONFIG_H
#define __CONFIG_H
-#if 0
-#define DEBUG 0xFFF
-#endif
-
-#if 0
-#define DEBUG 0x01
-#endif
-
/*
* High Level Configuration Options
* (easy to change)
-*/
+ */
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
+#define CONFIG_V38B 1 /* ...on V38B board */
+#define CFG_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */
-#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
-#define CONFIG_V38B 1 /* ... on V38B board */
-#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
+#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
-#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
-#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
-#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
+#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
#define CONFIG_NETCONSOLE 1
-#define CONFIG_BOARD_EARLY_INIT_R 1 /* make flash read/write */
-
-#define CFG_XLB_PIPELINING 1 /* gives better performance */
+#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */
+#define CFG_XLB_PIPELINING 1 /* gives better performance */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Serial console configuration
*/
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
/*
* DDR
*/
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
/*
* PCI - no suport
*/
*/
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00001000
/*
* Supported commands
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_FAT | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
- CFG_CMD_SDRAMi | \
+ CFG_CMD_SDRAMi | \
CFG_CMD_DATE | \
CFG_CMD_USB | \
CFG_CMD_FAT)
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Boot low with 16 MB Flash
*/
-# define CFG_LOWBOOT 1
-# define CFG_LOWBOOT16 1
+#define CFG_LOWBOOT 1
+#define CFG_LOWBOOT16 1
/*
* Autobooting
*/
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-#define CONFIG_PREBOOT "echo;" \
+#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
-#undef CONFIG_BOOTARGS
+#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootcmd=run net_nfs\0" \
+ "bootdelay=3\0" \
+ "baudrate=115200\0" \
+ "preboot=echo;echo Type \"run flash_nfs\" to mount root " \
+ "filesystem over NFS; echo\0" \
"netdev=eth0\0" \
- "devno=5\0" \
- "hostname=V38B_$(devno)\0" \
- "ipaddr=10.100.99.$(devno)\0" \
- "netmask=255.255.0.0\0" \
- "serverip=10.100.10.90\0" \
- "gatewayip=10.100.254.254\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "bootfile=mpc5200/uImage\0" \
- "bootcmd=run net_nfs\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
"$(netmask):$(hostname):$(netdev):off panic=1\0" \
"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
"flash_self=run ramargs addip;bootm $(kernel_addr) " \
"$(ramdisk_addr)\0" \
- "net_nfs=tftp 200000 $(bootfile);run nfsargs " \
- "addip;bootm\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
+ "hostname=v38b\0" \
+ "ethact=FEC ETHERNET\0" \
+ "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \
+ "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \
+ "cp.b 200000 ff000000 $(filesize);" \
+ "prot on ff000000 ff03ffff\0" \
+ "load=tftp 200000 $(u-boot)\0" \
+ "netmask=255.255.0.0\0" \
+ "ipaddr=192.168.160.18\0" \
+ "serverip=192.168.1.1\0" \
+ "ethaddr=00:e0:ee:00:05:2e\0" \
+ "bootfile=/tftpboot/v38b/uImage\0" \
+ "u-boot=/tftpboot/v38b/u-boot.bin\0" \
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
*/
#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
#endif
+
/*
* I2C configuration
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
-
-#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
#define CFG_I2C_SLAVE 0x7F
/*
*/
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_CFI_AMD_RESET 1
+#define CFG_FLASH_CFI_AMD_RESET 1
#define CFG_FLASH_BASE 0xFF000000
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
-
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
# define CFG_RAMBOOT 1
#endif
-#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Linux initial memory map */
/*
* Ethernet configuration
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
#define CFG_HID0_FINAL HID0_ICE
-#else
-#define CFG_HID0_INIT 0
-#define CFG_HID0_FINAL 0
-#endif
-
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
#define CFG_RESET_ADDRESS 0xff000000
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK 0x0001BBBB
-#define CONFIG_USB_CONFIG 0x00001000
-
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff Supports IDE harddisk
- *-----------------------------------------------------------------------
+/*
+ * IDE/ATA (supports IDE harddisk)
*/
+#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-
-#define CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_RESET /* reset for ide supported */
#define CONFIG_IDE_PREINIT
-#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
#define CFG_ATA_IDE0_OFFSET 0x0000
#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
-/* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET (0x0060)
-
-/* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+#define CFG_ATA_DATA_OFFSET (0x0060) /* data I/O offset */
-/* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET (0x005C)
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) /* normal register accesses offset */
-/* Interval between registers */
-#define CFG_ATA_STRIDE 4
+#define CFG_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */
-/* Status LED */
+#define CFG_ATA_STRIDE 4 /* Interval between registers */
-#define CONFIG_STATUS_LED /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-
-#define CFG_LED_BASE (0xf0000600 + 0x70) /* Timer 7 GPIO */
+/*
+ * Status LED
+ */
+#define CONFIG_STATUS_LED /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
+#define CFG_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */
#ifndef __ASSEMBLY__
-/* LEDs */
typedef unsigned int led_id_t;
#define __led_toggle(_msk) \
} while(0)
#define __led_init(_msk, st) \
- { \
+ do { \
*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
- }
-
-#endif
+ } while(0)
+#endif /* __ASSEMBLY__ */
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / commitdiff