USB: serial: keyspan_pda.c: remove dbg() usage

dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the
driver and uses dev_dbg() instead.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 1290b6f..940a0d5 100644 (file)
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -137,8 +137,8 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
                                 0,
                                 2000);
        if (result < 0)
-               dbg("%s - error %d from usb_control_msg",
-                   __func__, result);
+               dev_dbg(&serial->dev->dev, "%s - error %d from usb_control_msg\n",
+                       __func__, result);
 }
 
 
@@ -160,12 +160,10 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
        case -ENOENT:
        case -ESHUTDOWN:
                /* this urb is terminated, clean up */
-               dbg("%s - urb shutting down with status: %d",
-                   __func__, status);
+               dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
                return;
        default:
-               dbg("%s - nonzero urb status received: %d",
-                   __func__, status);
+               dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status);
                goto exit;
        }
 
@@ -183,7 +181,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
                break;
        case 1:
                /* status interrupt */
-               dbg(" rx int, d1=%d, d2=%d", data[1], data[2]);
+               dev_dbg(&port->dev, "rx int, d1=%d, d2=%d\n", data[1], data[2]);
                switch (data[1]) {
                case 1: /* modemline change */
                        break;
@@ -229,7 +227,7 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
        /* just restart the receive interrupt URB */
 
        if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
-               dbg(" usb_submit_urb(read urb) failed");
+               dev_dbg(&port->dev, "usb_submit_urb(read urb) failed\n");
 }
 
 
@@ -308,8 +306,8 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
                        USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
                        value, 0, NULL, 0, 2000);
        if (result < 0)
-               dbg("%s - error %d from usb_control_msg",
-                   __func__, result);
+               dev_dbg(&port->dev, "%s - error %d from usb_control_msg\n",
+                       __func__, result);
        /* there is something funky about this.. the TCSBRK that 'cu' performs
           ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4
           seconds apart, but it feels like the break sent isn't as long as it
@@ -347,7 +345,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty,
        speed = keyspan_pda_setbaud(serial, speed);
 
        if (speed == 0) {
-               dbg("can't handle requested baud rate");
+               dev_dbg(&port->dev, "can't handle requested baud rate\n");
                /* It hasn't changed so.. */
                speed = tty_termios_baud_rate(old_termios);
        }
@@ -459,7 +457,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
           Block if we can't write anything at all, otherwise write as much as
           we can. */
        if (count == 0) {
-               dbg(" write request of 0 bytes");
+               dev_dbg(&port->dev, "write request of 0 bytes\n");
                return 0;
        }
 
@@ -505,16 +503,16 @@ static int keyspan_pda_write(struct tty_struct *tty,
                                     1,
                                     2000);
                if (rc > 0) {
-                       dbg(" roomquery says %d", *room);
+                       dev_dbg(&port->dev, "roomquery says %d\n", *room);
                        priv->tx_room = *room;
                }
                kfree(room);
                if (rc < 0) {
-                       dbg(" roomquery failed");
+                       dev_dbg(&port->dev, "roomquery failed\n");
                        goto exit;
                }
                if (rc == 0) {
-                       dbg(" roomquery returned 0 bytes");
+                       dev_dbg(&port->dev, "roomquery returned 0 bytes\n");
                        rc = -EIO; /* device didn't return any data */
                        goto exit;
                }
@@ -536,7 +534,7 @@ static int keyspan_pda_write(struct tty_struct *tty,
 
                rc = usb_submit_urb(port->write_urb, GFP_ATOMIC);
                if (rc) {
-                       dbg(" usb_submit_urb(write bulk) failed");
+                       dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n");
                        goto exit;
                }
        } else {
@@ -639,11 +637,11 @@ static int keyspan_pda_open(struct tty_struct *tty,
                             1,
                             2000);
        if (rc < 0) {
-               dbg("%s - roomquery failed", __func__);
+               dev_dbg(&port->dev, "%s - roomquery failed\n", __func__);
                goto error;
        }
        if (rc == 0) {
-               dbg("%s - roomquery returned 0 bytes", __func__);
+               dev_dbg(&port->dev, "%s - roomquery returned 0 bytes\n", __func__);
                rc = -EIO;
                goto error;
        }
@@ -654,7 +652,7 @@ static int keyspan_pda_open(struct tty_struct *tty,
        /*Start reading from the device*/
        rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
        if (rc) {
-               dbg("%s - usb_submit_urb(read int) failed", __func__);
+               dev_dbg(&port->dev, "%s - usb_submit_urb(read int) failed\n", __func__);
                goto error;
        }
 error: