#include <linux/spi/spi.h>
#include <linux/acpi.h>
#include <sound/core.h>
+#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
}
EXPORT_SYMBOL_GPL(rt5640_sel_asrc_clk_src);
+static void rt5640_enable_micbias1_for_ovcd(struct snd_soc_component *component)
+{
+ struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
+
+ snd_soc_dapm_mutex_lock(dapm);
+ snd_soc_dapm_force_enable_pin_unlocked(dapm, "LDO2");
+ snd_soc_dapm_force_enable_pin_unlocked(dapm, "MICBIAS1");
+ /* OVCD is unreliable when used with RCCLK as sysclk-source */
+ snd_soc_dapm_force_enable_pin_unlocked(dapm, "Platform Clock");
+ snd_soc_dapm_sync_unlocked(dapm);
+ snd_soc_dapm_mutex_unlock(dapm);
+}
+
+static void rt5640_disable_micbias1_for_ovcd(struct snd_soc_component *component)
+{
+ struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
+
+ snd_soc_dapm_mutex_lock(dapm);
+ snd_soc_dapm_disable_pin_unlocked(dapm, "Platform Clock");
+ snd_soc_dapm_disable_pin_unlocked(dapm, "MICBIAS1");
+ snd_soc_dapm_disable_pin_unlocked(dapm, "LDO2");
+ snd_soc_dapm_sync_unlocked(dapm);
+ snd_soc_dapm_mutex_unlock(dapm);
+}
+
+static void rt5640_clear_micbias1_ovcd(struct snd_soc_component *component)
+{
+ snd_soc_component_update_bits(component, RT5640_IRQ_CTRL2,
+ RT5640_MB1_OC_STATUS, 0);
+}
+
+static bool rt5640_micbias1_ovcd(struct snd_soc_component *component)
+{
+ int val;
+
+ val = snd_soc_component_read32(component, RT5640_IRQ_CTRL2);
+ dev_dbg(component->dev, "irq ctrl2 %#04x\n", val);
+
+ return (val & RT5640_MB1_OC_STATUS);
+}
+
+static bool rt5640_jack_inserted(struct snd_soc_component *component)
+{
+ struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component);
+ int val;
+
+ val = snd_soc_component_read32(component, RT5640_INT_IRQ_ST);
+ dev_dbg(component->dev, "irq status %#04x\n", val);
+
+ if (rt5640->jd_inverted)
+ return !(val & RT5640_JD_STATUS);
+ else
+ return (val & RT5640_JD_STATUS);
+}
+
+/* Jack detect timings */
+#define JACK_SETTLE_TIME 100 /* milli seconds */
+#define JACK_DETECT_COUNT 5
+#define JACK_DETECT_MAXCOUNT 20 /* Aprox. 2 seconds worth of tries */
+
+static int rt5640_detect_headset(struct snd_soc_component *component)
+{
+ int i, headset_count = 0, headphone_count = 0;
+
+ /*
+ * We get the insertion event before the jack is fully inserted at which
+ * point the second ring on a TRRS connector may short the 2nd ring and
+ * sleeve contacts, also the overcurrent detection is not entirely
+ * reliable. So we try several times with a wait in between until we
+ * detect the same type JACK_DETECT_COUNT times in a row.
+ */
+ for (i = 0; i < JACK_DETECT_MAXCOUNT; i++) {
+ /* Clear any previous over-current status flag */
+ rt5640_clear_micbias1_ovcd(component);
+
+ msleep(JACK_SETTLE_TIME);
+
+ /* Check the jack is still connected before checking ovcd */
+ if (!rt5640_jack_inserted(component))
+ return 0;
+
+ if (rt5640_micbias1_ovcd(component)) {
+ /*
+ * Over current detected, there is a short between the
+ * 2nd ring contact and the ground, so a TRS connector
+ * without a mic contact and thus plain headphones.
+ */
+ dev_dbg(component->dev, "jack mic-gnd shorted\n");
+ headset_count = 0;
+ headphone_count++;
+ if (headphone_count == JACK_DETECT_COUNT)
+ return SND_JACK_HEADPHONE;
+ } else {
+ dev_dbg(component->dev, "jack mic-gnd open\n");
+ headphone_count = 0;
+ headset_count++;
+ if (headset_count == JACK_DETECT_COUNT)
+ return SND_JACK_HEADSET;
+ }
+ }
+
+ dev_err(component->dev, "Error detecting headset vs headphones, bad contact?, assuming headphones\n");
+ return SND_JACK_HEADPHONE;
+}
+
+static void rt5640_jack_work(struct work_struct *work)
+{
+ struct rt5640_priv *rt5640 =
+ container_of(work, struct rt5640_priv, jack_work);
+ struct snd_soc_component *component = rt5640->component;
+ int status;
+
+ if (!rt5640_jack_inserted(component)) {
+ /* Jack removed, or spurious IRQ? */
+ if (rt5640->jack->status & SND_JACK_HEADPHONE) {
+ snd_soc_jack_report(rt5640->jack, 0, SND_JACK_HEADSET);
+ dev_dbg(component->dev, "jack unplugged\n");
+ }
+ } else if (!(rt5640->jack->status & SND_JACK_HEADPHONE)) {
+ /* Jack inserted */
+ rt5640_enable_micbias1_for_ovcd(component);
+ status = rt5640_detect_headset(component);
+ rt5640_disable_micbias1_for_ovcd(component);
+
+ dev_dbg(component->dev, "detect status %#02x\n", status);
+ snd_soc_jack_report(rt5640->jack, status, SND_JACK_HEADSET);
+ }
+}
+
+static irqreturn_t rt5640_irq(int irq, void *data)
+{
+ struct rt5640_priv *rt5640 = data;
+
+ if (rt5640->jack)
+ queue_work(system_long_wq, &rt5640->jack_work);
+
+ return IRQ_HANDLED;
+}
+
+static void rt5640_cancel_work(void *data)
+{
+ struct rt5640_priv *rt5640 = data;
+
+ cancel_work_sync(&rt5640->jack_work);
+}
+
+static void rt5640_enable_jack_detect(struct snd_soc_component *component,
+ struct snd_soc_jack *jack)
+{
+ struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component);
+
+ /* Select JD-source */
+ snd_soc_component_update_bits(component, RT5640_JD_CTRL,
+ RT5640_JD_MASK, rt5640->jd_src);
+
+ /* Selecting GPIO01 as an interrupt */
+ snd_soc_component_update_bits(component, RT5640_GPIO_CTRL1,
+ RT5640_GP1_PIN_MASK, RT5640_GP1_PIN_IRQ);
+
+ /* Set GPIO1 output */
+ snd_soc_component_update_bits(component, RT5640_GPIO_CTRL3,
+ RT5640_GP1_PF_MASK, RT5640_GP1_PF_OUT);
+
+ /* Enabling jd2 in general control 1 */
+ snd_soc_component_write(component, RT5640_DUMMY1, 0x3f41);
+
+ /* Enabling jd2 in general control 2 */
+ snd_soc_component_write(component, RT5640_DUMMY2, 0x4001);
+
+ snd_soc_component_write(component, RT5640_PR_BASE + RT5640_BIAS_CUR4,
+ 0xa800 | rt5640->ovcd_sf);
+
+ snd_soc_component_update_bits(component, RT5640_MICBIAS,
+ RT5640_MIC1_OVTH_MASK | RT5640_MIC1_OVCD_MASK,
+ rt5640->ovcd_th | RT5640_MIC1_OVCD_EN);
+
+ /*
+ * The over-current-detect is only reliable in detecting the absence
+ * of over-current, when the mic-contact in the jack is short-circuited,
+ * the hardware periodically retries if it can apply the bias-current
+ * leading to the ovcd status flip-flopping 1-0-1 with it being 0 about
+ * 10% of the time, as we poll the ovcd status bit we might hit that
+ * 10%, so we enable sticky mode and when checking OVCD we clear the
+ * status, msleep() a bit and then check to get a reliable reading.
+ */
+ snd_soc_component_update_bits(component, RT5640_IRQ_CTRL2,
+ RT5640_MB1_OC_STKY_MASK, RT5640_MB1_OC_STKY_EN);
+
+ snd_soc_component_write(component, RT5640_IRQ_CTRL1,
+ RT5640_IRQ_JD_NOR);
+
+ rt5640->jack = jack;
+ enable_irq(rt5640->irq);
+ /* sync initial jack state */
+ queue_work(system_long_wq, &rt5640->jack_work);
+}
+
+static void rt5640_disable_jack_detect(struct snd_soc_component *component)
+{
+ struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component);
+
+ disable_irq(rt5640->irq);
+ rt5640_cancel_work(rt5640);
+
+ rt5640->jack = NULL;
+}
+
+static int rt5640_set_jack(struct snd_soc_component *component,
+ struct snd_soc_jack *jack, void *data)
+{
+ if (jack)
+ rt5640_enable_jack_detect(component, jack);
+ else
+ rt5640_disable_jack_detect(component);
+
+ return 0;
+}
+
static int rt5640_probe(struct snd_soc_component *component)
{
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
if (dmic_en)
rt5640_dmic_enable(component, dmic1_data_pin, dmic2_data_pin);
+ if (device_property_read_u32(component->dev,
+ "realtek,jack-detect-source", &val) == 0) {
+ if (val <= RT5640_JD_SRC_GPIO4)
+ rt5640->jd_src = val << RT5640_JD_SFT;
+ else
+ dev_warn(component->dev, "Warning: Invalid jack-detect-source value: %d, leaving jack-detect disabled\n",
+ val);
+ }
+
+ if (!device_property_read_bool(component->dev, "realtek,jack-detect-not-inverted"))
+ rt5640->jd_inverted = true;
+
+ /*
+ * Testing on various boards has shown that good defaults for the OVCD
+ * threshold and scale-factor are 2000µA and 0.75. For an effective
+ * limit of 1500µA, this seems to be more reliable then 1500µA and 1.0.
+ */
+ rt5640->ovcd_th = RT5640_MIC1_OVTH_2000UA;
+ rt5640->ovcd_sf = RT5640_MIC_OVCD_SF_0P75;
+
+ if (device_property_read_u32(component->dev,
+ "realtek,over-current-threshold-microamp", &val) == 0) {
+ switch (val) {
+ case 600:
+ rt5640->ovcd_th = RT5640_MIC1_OVTH_600UA;
+ break;
+ case 1500:
+ rt5640->ovcd_th = RT5640_MIC1_OVTH_1500UA;
+ break;
+ case 2000:
+ rt5640->ovcd_th = RT5640_MIC1_OVTH_2000UA;
+ break;
+ default:
+ dev_warn(component->dev, "Warning: Invalid over-current-threshold-microamp value: %d, defaulting to 2000uA\n",
+ val);
+ }
+ }
+
+ if (device_property_read_u32(component->dev,
+ "realtek,over-current-scale-factor", &val) == 0) {
+ if (val <= RT5640_OVCD_SF_1P5)
+ rt5640->ovcd_sf = val << RT5640_MIC_OVCD_SF_SFT;
+ else
+ dev_warn(component->dev, "Warning: Invalid over-current-scale-factor value: %d, defaulting to 0.75\n",
+ val);
+ }
+
return 0;
}
.suspend = rt5640_suspend,
.resume = rt5640_resume,
.set_bias_level = rt5640_set_bias_level,
+ .set_jack = rt5640_set_jack,
.controls = rt5640_snd_controls,
.num_controls = ARRAY_SIZE(rt5640_snd_controls),
.dapm_widgets = rt5640_dapm_widgets,
RT5640_MCLK_DET, RT5640_MCLK_DET);
rt5640->hp_mute = 1;
+ rt5640->irq = i2c->irq;
+ INIT_WORK(&rt5640->jack_work, rt5640_jack_work);
+
+ /* Make sure work is stopped on probe-error / remove */
+ ret = devm_add_action_or_reset(&i2c->dev, rt5640_cancel_work, rt5640);
+ if (ret)
+ return ret;
+
+ ret = devm_request_irq(&i2c->dev, rt5640->irq, rt5640_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
+ | IRQF_ONESHOT, "rt5640", rt5640);
+ if (ret == 0) {
+ /* Gets re-enabled by rt5640_set_jack() */
+ disable_irq(rt5640->irq);
+ } else {
+ dev_warn(&i2c->dev, "Failed to reguest IRQ %d: %d\n",
+ rt5640->irq, ret);
+ rt5640->irq = -ENXIO;
+ }
return devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_rt5640,
projects / platform / kernel / linux-rpi3.git / commitdiff