igep00x0: Use BCH8 ECC

Used NAND chips requires at least 4-bit error correction, so use BCH8
as it is what kernel uses.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Javier Martinez Canillas <javier@osg.samsung.com>

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 4409103..cf2bc3e 100644 (file)
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -160,12 +160,20 @@
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
 #define CONFIG_SYS_NAND_OOBSIZE                64
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
-#define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9,\
-                                               10, 11, 12, 13}
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS         { 2,  3,  4,  5,  6,  7,  8,  9, \
+                                        10, 11, 12, 13, 14, 15, 16, 17, \
+                                        18, 19, 20, 21, 22, 23, 24, 25, \
+                                        26, 27, 28, 29, 30, 31, 32, 33, \
+                                        34, 35, 36, 37, 38, 39, 40, 41, \
+                                        42, 43, 44, 45, 46, 47, 48, 49, \
+                                        50, 51, 52, 53, 54, 55, 56, 57, }
 #define CONFIG_SYS_NAND_ECCSIZE                512
-#define CONFIG_SYS_NAND_ECCBYTES       3
-#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
+#define CONFIG_SYS_NAND_ECCBYTES       14
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_BCH
+
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT