dt/bindings: Add bindings for PIC32 UART driver
authorAndrei Pistirica <andrei.pistirica@microchip.com>
Thu, 14 Jan 2016 01:15:42 +0000 (18:15 -0700)
committerRalf Baechle <ralf@linux-mips.org>
Fri, 13 May 2016 12:01:56 +0000 (14:01 +0200)
Document the devicetree bindings for the UART peripheral found on
Microchip PIC32 class devices.

Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12100/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
new file mode 100644 (file)
index 0000000..65b38bf
--- /dev/null
@@ -0,0 +1,29 @@
+* Microchip Universal Asynchronous Receiver Transmitter (UART)
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-uart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+- clocks: Phandle to the clock.
+          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
+             See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+Optional properties:
+- cts-gpios: CTS pin for UART
+
+Example:
+       uart1: serial@1f822000 {
+               compatible = "microchip,pic32mzda-uart";
+               reg = <0x1f822000 0x50>;
+               interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+                       <113 IRQ_TYPE_LEVEL_HIGH>,
+                       <114 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&PBCLK2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_uart1
+                               &pinctrl_uart1_cts
+                               &pinctrl_uart1_rts>;
+               cts-gpios = <&gpio1 15 0>;
+       };