[PATCH] dvb: frontend: or51132: remove bogus optimization attempt

This fix has also been applied to lgdt330x.  There is an optimization that
keeps track of the frequency tuned by the digital decoder.  The digital driver
does not set the frequency if it has not changed since it was tuned.  The
analog tuner driver knows nothing about the frequency saved by the digital
driver.  When the frequency is set using the video4linux code with tvtime, the
hardware get changed but the digital driver's state does not get updated.
Switch back to the same digital channel and the driver finds no change in
frequency so the tuner is not reset to the digital frequency.  The work around
is to remove the check and always set the tuner to the specified frequency.

Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index cc0a77c..b6d0eec 100644 (file)
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -370,22 +370,19 @@ static int or51132_set_parameters(struct dvb_frontend* fe,
                or51132_setmode(fe);
        }
 
-       /* Change only if we are actually changing the channel */
-       if (state->current_frequency != param->frequency) {
-               dvb_pll_configure(state->config->pll_desc, buf,
-                                 param->frequency, 0);
-               dprintk("set_parameters tuner bytes: 0x%02x 0x%02x "
-                       "0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]);
-               if (i2c_writebytes(state, state->config->pll_address ,buf, 4))
-                       printk(KERN_WARNING "or51132: set_parameters error "
-                              "writing to tuner\n");
-
-               /* Set to current mode */
-               or51132_setmode(fe);
-
-               /* Update current frequency */
-               state->current_frequency = param->frequency;
-       }
+       dvb_pll_configure(state->config->pll_desc, buf,
+                         param->frequency, 0);
+       dprintk("set_parameters tuner bytes: 0x%02x 0x%02x "
+               "0x%02x 0x%02x\n",buf[0],buf[1],buf[2],buf[3]);
+       if (i2c_writebytes(state, state->config->pll_address ,buf, 4))
+               printk(KERN_WARNING "or51132: set_parameters error "
+                      "writing to tuner\n");
+
+       /* Set to current mode */
+       or51132_setmode(fe);
+
+       /* Update current frequency */
+       state->current_frequency = param->frequency;
        return 0;
 }