rt2x00: Fix and fine-tune rf registers for RT3070/RT3071/RT3090
authorRA-Jay Hung <jay_hung@ralinktech.com>
Mon, 10 Jan 2011 10:28:10 +0000 (11:28 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 19 Jan 2011 16:36:07 +0000 (11:36 -0500)
Basically fix and fine-tune RT3070/RT3071/RT3090 chip RF initial value
when call rt2800_init_rfcsr

Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rt2x00/rt2800.h
drivers/net/wireless/rt2x00/rt2800lib.c

index 4c55e85..c7e615c 100644 (file)
@@ -1805,6 +1805,12 @@ struct mac_iveiv_entry {
 #define RFCSR30_RF_CALIBRATION         FIELD8(0x80)
 
 /*
+ * RFCSR 31:
+ */
+#define RFCSR31_RX_AGC_FC              FIELD8(0x1f)
+#define RFCSR31_RX_H20M                        FIELD8(0x20)
+
+/*
  * RF registers
  */
 
index e2a528d..a25be62 100644 (file)
@@ -2436,6 +2436,10 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
        rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
        rt2800_bbp_write(rt2x00dev, 4, bbp);
 
+       rt2800_rfcsr_read(rt2x00dev, 31, &rfcsr);
+       rt2x00_set_field8(&rfcsr, RFCSR31_RX_H20M, bw40);
+       rt2800_rfcsr_write(rt2x00dev, 31, rfcsr);
+
        rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
        rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
        rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
@@ -2510,7 +2514,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
                rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
                rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
                rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
-               rt2800_rfcsr_write(rt2x00dev, 7, 0x70);
+               rt2800_rfcsr_write(rt2x00dev, 7, 0x60);
                rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
                rt2800_rfcsr_write(rt2x00dev, 10, 0x41);
                rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
@@ -2602,12 +2606,12 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
                rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
        } else if (rt2x00_rt(rt2x00dev, RT3071) ||
                   rt2x00_rt(rt2x00dev, RT3090)) {
+               rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
+
                rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
                rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
                rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
 
-               rt2800_rfcsr_write(rt2x00dev, 31, 0x14);
-
                rt2800_register_read(rt2x00dev, LDO_CFG0, &reg);
                rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
                if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
@@ -2619,6 +2623,10 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
                                rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
                }
                rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
+
+               rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
+               rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
+               rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
        } else if (rt2x00_rt(rt2x00dev, RT3390)) {
                rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
                rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
@@ -2670,10 +2678,11 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 
        rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
        rt2x00_set_field8(&rfcsr, RFCSR17_TX_LO1_EN, 0);
-       if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
+       if (rt2x00_rt(rt2x00dev, RT3070) ||
+           rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
            rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
            rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
-               if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+               if (!test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
                        rt2x00_set_field8(&rfcsr, RFCSR17_R, 1);
        }
        rt2x00_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &eeprom);
@@ -2686,6 +2695,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
        if (rt2x00_rt(rt2x00dev, RT3090)) {
                rt2800_bbp_read(rt2x00dev, 138, &bbp);
 
+               /*  Turn off unused DAC1 and ADC1 to reduce power consumption */
                rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
                if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
                        rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0);
@@ -2719,10 +2729,9 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
                rt2800_rfcsr_write(rt2x00dev, 21, rfcsr);
        }
 
-       if (rt2x00_rt(rt2x00dev, RT3070) || rt2x00_rt(rt2x00dev, RT3071)) {
+       if (rt2x00_rt(rt2x00dev, RT3070)) {
                rt2800_rfcsr_read(rt2x00dev, 27, &rfcsr);
-               if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) ||
-                   rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E))
+               if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F))
                        rt2x00_set_field8(&rfcsr, RFCSR27_R1, 3);
                else
                        rt2x00_set_field8(&rfcsr, RFCSR27_R1, 0);