driver/mtd: IFC NAND: Add support of ONFI NAND flash
authorPrabhakar Kushwaha <prabhakar@freescale.com>
Sun, 8 Apr 2012 18:57:18 +0000 (18:57 +0000)
committerScott Wood <scott@tyr.buserror.net>
Fri, 18 May 2012 23:13:50 +0000 (18:13 -0500)
- Fix NAND_CMD_READID command for ONFI detect.
  - Add NAND_CMD_PARAM command to read the ONFI parameter page.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scott@tyr.buserror.net>
drivers/mtd/nand/fsl_ifc_nand.c

index 5cac78b..a518526 100644 (file)
@@ -384,19 +384,30 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
 
        /* READID must read all possible bytes while CEB is active */
        case NAND_CMD_READID:
+       case NAND_CMD_PARAM: {
+               int timing = IFC_FIR_OP_RB;
+               if (command == NAND_CMD_PARAM)
+                       timing = IFC_FIR_OP_RBCD;
+
                out_be32(&ifc->ifc_nand.nand_fir0,
                                (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
                                (IFC_FIR_OP_UA  << IFC_NAND_FIR0_OP1_SHIFT) |
-                               (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
+                               (timing << IFC_NAND_FIR0_OP2_SHIFT));
                out_be32(&ifc->ifc_nand.nand_fcr0,
-                               NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
-               /* 4 bytes for manuf, device and exts */
-               out_be32(&ifc->ifc_nand.nand_fbcr, 4);
-               ctrl->read_bytes = 4;
+                               command << IFC_NAND_FCR0_CMD0_SHIFT);
+               out_be32(&ifc->ifc_nand.row3, column);
+
+               /*
+                * although currently it's 8 bytes for READID, we always read
+                * the maximum 256 bytes(for PARAM)
+                */
+               out_be32(&ifc->ifc_nand.nand_fbcr, 256);
+               ctrl->read_bytes = 256;
 
                set_addr(mtd, 0, 0, 0);
                fsl_ifc_run_command(mtd);
                return;
+       }
 
        /* ERASE1 stores the block and page address */
        case NAND_CMD_ERASE1: