arm: dtsi: dra76x: Add CAL dtsi node

Add the required dtsi node to support the Camera
Adaptation Layer (CAL) for the DRA76 family of devices.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index cdcba3f..2f7539a 100644 (file)
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -41,6 +41,48 @@
 
 };
 
+&l4_per3 {
+       target-module@1b0000 {                  /* 0x489b0000, ap 25 34.0 */
+               compatible = "ti,sysc-omap4", "ti,sysc";
+               reg = <0x1b0000 0x4>,
+                     <0x1b0010 0x4>;
+               reg-names = "rev", "sysc";
+               ti,sysc-midle = <SYSC_IDLE_FORCE>,
+                               <SYSC_IDLE_NO>;
+               ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+                               <SYSC_IDLE_NO>;
+               clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+               clock-names = "fck";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges = <0x0 0x1b0000 0x10000>;
+
+               cal: cal@0 {
+                       compatible = "ti,dra76-cal";
+                       reg = <0x0000 0x400>,
+                             <0x0800 0x40>,
+                             <0x0900 0x40>;
+                       reg-names = "cal_top",
+                                   "cal_rx_core0",
+                                   "cal_rx_core1";
+                       interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+                       ti,camerrx-control = <&scm_conf 0x6dc>;
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               csi2_0: port@0 {
+                                       reg = <0>;
+                               };
+                               csi2_1: port@1 {
+                                       reg = <1>;
+                               };
+                       };
+               };
+       };
+};
+
 /* MCAN interrupts are hard-wired to irqs 67, 68 */
 &crossbar_mpu {
        ti,irqs-skip = <10 67 68 133 139 140>;