gpio: pcf857x: use client->irq for gpio_to_irq()

6e20a0a429bd4dc07d6de16d9c247270e04e4aa0
(gpio: pcf857x: enable gpio_to_irq() support)
added gpio_to_irq() support on pcf857x driver,
but it used pdata->irq.
This patch modifies driver to use client->irq instead of it.
It modifies kzm9g board platform settings,
and device probe information too.
This patch is tested on kzm9g board

Reported-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..7a05de7 100644 (file)
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -548,7 +548,6 @@ static struct platform_device fsi_ak4648_device = {
 /* I2C */
 static struct pcf857x_platform_data pcf8575_pdata = {
        .gpio_base      = GPIO_PCF8575_BASE,
-       .irq            = intcs_evt2irq(0x3260), /* IRQ19 */
 };
 
 static struct i2c_board_info i2c0_devices[] = {
@@ -570,6 +569,7 @@ static struct i2c_board_info i2c1_devices[] = {
 static struct i2c_board_info i2c3_devices[] = {
        {
                I2C_BOARD_INFO("pcf8575", 0x20),
+               .irq            = intcs_evt2irq(0x3260), /* IRQ19 */
                .platform_data = &pcf8575_pdata,
        },
 };

diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 16af35c..a19b745 100644 (file)
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -223,11 +223,11 @@ static void pcf857x_irq_domain_cleanup(struct pcf857x *gpio)
 
 static int pcf857x_irq_domain_init(struct pcf857x *gpio,
                                   struct pcf857x_platform_data *pdata,
-                                  struct device *dev)
+                                  struct i2c_client *client)
 {
        int status;
 
-       gpio->irq_domain = irq_domain_add_linear(dev->of_node,
+       gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
                                                 gpio->chip.ngpio,
                                                 &pcf857x_irq_domain_ops,
                                                 NULL);
@@ -235,15 +235,15 @@ static int pcf857x_irq_domain_init(struct pcf857x *gpio,
                goto fail;
 
        /* enable real irq */
-       status = request_irq(pdata->irq, pcf857x_irq_demux, 0,
-                            dev_name(dev), gpio);
+       status = request_irq(client->irq, pcf857x_irq_demux, 0,
+                            dev_name(&client->dev), gpio);
        if (status)
                goto fail;
 
        /* enable gpio_to_irq() */
        INIT_WORK(&gpio->work, pcf857x_irq_demux_work);
        gpio->chip.to_irq       = pcf857x_to_irq;
-       gpio->irq               = pdata->irq;
+       gpio->irq               = client->irq;
 
        return 0;
 
@@ -285,8 +285,8 @@ static int pcf857x_probe(struct i2c_client *client,
        gpio->chip.ngpio                = id->driver_data;
 
        /* enable gpio_to_irq() if platform has settings */
-       if (pdata && pdata->irq) {
-               status = pcf857x_irq_domain_init(gpio, pdata, &client->dev);
+       if (pdata && client->irq) {
+               status = pcf857x_irq_domain_init(gpio, pdata, client);
                if (status < 0) {
                        dev_err(&client->dev, "irq_domain init failed\n");
                        goto fail;
@@ -368,15 +368,6 @@ static int pcf857x_probe(struct i2c_client *client,
        if (status < 0)
                goto fail;
 
-       /* NOTE: these chips can issue "some pin-changed" IRQs, which we
-        * don't yet even try to use.  Among other issues, the relevant
-        * genirq state isn't available to modular drivers; and most irq
-        * methods can't be called from sleeping contexts.
-        */
-
-       dev_info(&client->dev, "%s\n",
-                       client->irq ? " (irq ignored)" : "");
-
        /* Let platform code set up the GPIOs and their users.
         * Now is the first time anyone could use them.
         */
@@ -388,13 +379,15 @@ static int pcf857x_probe(struct i2c_client *client,
                        dev_warn(&client->dev, "setup --> %d\n", status);
        }
 
+       dev_info(&client->dev, "probed\n");
+
        return 0;
 
 fail:
        dev_dbg(&client->dev, "probe error %d for '%s'\n",
                        status, client->name);
 
-       if (pdata && pdata->irq)
+       if (pdata && client->irq)
                pcf857x_irq_domain_cleanup(gpio);
 
        kfree(gpio);
@@ -418,7 +411,7 @@ static int pcf857x_remove(struct i2c_client *client)
                }
        }
 
-       if (pdata && pdata->irq)
+       if (pdata && client->irq)
                pcf857x_irq_domain_cleanup(gpio);
 
        status = gpiochip_remove(&gpio->chip);

diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h
index 781e6bd..0767a2a 100644 (file)
--- a/include/linux/i2c/pcf857x.h
+++ b/include/linux/i2c/pcf857x.h
@@ -10,7 +10,6 @@
  * @setup: optional callback issued once the GPIOs are valid
  * @teardown: optional callback issued before the GPIOs are invalidated
  * @context: optional parameter passed to setup() and teardown()
- * @irq: optional interrupt number
  *
  * In addition to the I2C_BOARD_INFO() state appropriate to each chip,
  * the i2c_board_info used with the pcf875x driver must provide its
@@ -40,8 +39,6 @@ struct pcf857x_platform_data {
                                        int gpio, unsigned ngpio,
                                        void *context);
        void            *context;
-
-       int             irq;
 };
 
 #endif /* __LINUX_PCF857X_H */