.get_link_capabilities = &ixgbe_get_link_capabilities_82598,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
+ .init_led_link_act = ixgbe_init_led_link_act_generic,
.blink_led_start = &ixgbe_blink_led_start_generic,
.blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
.get_link_capabilities = &ixgbe_get_link_capabilities_82599,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
+ .init_led_link_act = ixgbe_init_led_link_act_generic,
.blink_led_start = &ixgbe_blink_led_start_generic,
.blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
status = hw->mac.ops.start_hw(hw);
}
+ /* Initialize the LED link active for LED blink support */
+ hw->mac.ops.init_led_link_act(hw);
+
return status;
}
}
/**
+ * ixgbe_init_led_link_act_generic - Store the LED index link/activity.
+ * @hw: pointer to hardware structure
+ *
+ * Store the index for the link active LED. This will be used to support
+ * blinking the LED.
+ **/
+s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ u32 led_reg, led_mode;
+ u16 i;
+
+ led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /* Get LED link active from the LEDCTL register */
+ for (i = 0; i < 4; i++) {
+ led_mode = led_reg >> IXGBE_LED_MODE_SHIFT(i);
+
+ if ((led_mode & IXGBE_LED_MODE_MASK_BASE) ==
+ IXGBE_LED_LINK_ACTIVE) {
+ mac->led_link_act = i;
+ return 0;
+ }
+ }
+
+ /* If LEDCTL register does not have the LED link active set, then use
+ * known MAC defaults.
+ */
+ switch (hw->mac.type) {
+ case ixgbe_mac_x550em_a:
+ mac->led_link_act = 0;
+ break;
+ case ixgbe_mac_X550EM_x:
+ mac->led_link_act = 1;
+ break;
+ default:
+ mac->led_link_act = 2;
+ }
+
+ return 0;
+}
+
+/**
* ixgbe_led_on_generic - Turns on the software controllable LEDs.
* @hw: pointer to hardware structure
* @index: led number to turn on
s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw);
s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
return 2;
case ETHTOOL_ID_ON:
- hw->mac.ops.led_on(hw, hw->bus.func);
+ hw->mac.ops.led_on(hw, hw->mac.led_link_act);
break;
case ETHTOOL_ID_OFF:
- hw->mac.ops.led_off(hw, hw->bus.func);
+ hw->mac.ops.led_off(hw, hw->mac.led_link_act);
break;
case ETHTOOL_ID_INACTIVE:
s32 (*led_off)(struct ixgbe_hw *, u32);
s32 (*blink_led_start)(struct ixgbe_hw *, u32);
s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
+ s32 (*init_led_link_act)(struct ixgbe_hw *);
/* RAR, Multicast, VLAN */
s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
u8 san_mac_rar_index;
struct ixgbe_thermal_sensor_data thermal_sensor_data;
bool set_lben;
+ u8 led_link_act;
};
struct ixgbe_phy_info {
.get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
+ .init_led_link_act = ixgbe_init_led_link_act_generic,
.blink_led_start = &ixgbe_blink_led_start_X540,
.blink_led_stop = &ixgbe_blink_led_stop_X540,
.set_rar = &ixgbe_set_rar_generic,
X550_COMMON_MAC
.led_on = ixgbe_led_on_generic,
.led_off = ixgbe_led_off_generic,
+ .init_led_link_act = ixgbe_init_led_link_act_generic,
.reset_hw = &ixgbe_reset_hw_X540,
.get_media_type = &ixgbe_get_media_type_X540,
.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
X550_COMMON_MAC
.led_on = ixgbe_led_on_t_x550em,
.led_off = ixgbe_led_off_t_x550em,
+ .init_led_link_act = ixgbe_init_led_link_act_generic,
.reset_hw = &ixgbe_reset_hw_X550em,
.get_media_type = &ixgbe_get_media_type_X550em,
.get_san_mac_addr = NULL,
X550_COMMON_MAC
.led_on = ixgbe_led_on_t_x550em,
.led_off = ixgbe_led_off_t_x550em,
+ .init_led_link_act = ixgbe_init_led_link_act_generic,
.reset_hw = ixgbe_reset_hw_X550em,
.get_media_type = ixgbe_get_media_type_X550em,
.get_san_mac_addr = NULL,