powerpc/powernv: Add support for indirect XSCOM via debugfs

Indirect XSCOM addresses normally have the top bit set (of the 64-bit
address). This doesn't work via the normal debugfs interface, so we use
a different encoding, which we need to convert before calling OPAL.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c
index 09a90d8..4d99a8f 100644 (file)
--- a/arch/powerpc/platforms/powernv/opal-xscom.c
+++ b/arch/powerpc/platforms/powernv/opal-xscom.c
@@ -71,11 +71,33 @@ static int opal_xscom_err_xlate(int64_t rc)
        }
 }
 
+static u64 opal_scom_unmangle(u64 reg)
+{
+       /*
+        * XSCOM indirect addresses have the top bit set. Additionally
+        * the reset of the top 3 nibbles is always 0.
+        *
+        * Because the debugfs interface uses signed offsets and shifts
+        * the address left by 3, we basically cannot use the top 4 bits
+        * of the 64-bit address, and thus cannot use the indirect bit.
+        *
+        * To deal with that, we support the indirect bit being in bit
+        * 4 (IBM notation) instead of bit 0 in this API, we do the
+        * conversion here. To leave room for further xscom address
+        * expansion, we only clear out the top byte
+        *
+        */
+       if (reg & (1ull << 59))
+               reg = (reg & ~(0xffull << 56)) | (1ull << 63);
+       return reg;
+}
+
 static int opal_scom_read(scom_map_t map, u64 reg, u64 *value)
 {
        struct opal_scom_map *m = map;
        int64_t rc;
 
+       reg = opal_scom_unmangle(reg);
        rc = opal_xscom_read(m->chip, m->addr + reg, (uint64_t *)__pa(value));
        return opal_xscom_err_xlate(rc);
 }
@@ -85,6 +107,7 @@ static int opal_scom_write(scom_map_t map, u64 reg, u64 value)
        struct opal_scom_map *m = map;
        int64_t rc;
 
+       reg = opal_scom_unmangle(reg);
        rc = opal_xscom_write(m->chip, m->addr + reg, value);
        return opal_xscom_err_xlate(rc);
 }