cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config option

This doesn't have any benefit apart from saving a small amount of memory
when it is disabled. The ifdef hackery in the code makes it dirty
unnecessarily.

Clean it up by removing the Kconfig option completely. Few defconfigs
are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with
CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 79c415c..809f0bf 100644 (file)
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -24,7 +24,7 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m

diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 361686a..69a4bd1 100644 (file)
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -58,7 +58,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_KIRKWOOD_CPUIDLE=y

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 028d2b7..8d7b17f 100644 (file)
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -132,7 +132,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_KEXEC=y
 CONFIG_EFI=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m

diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index f7f6039..4b598da 100644 (file)
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -44,7 +44,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_KIRKWOOD_CPUIDLE=y

diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index e4314b1..271dc7e 100644 (file)
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -97,7 +97,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 ro"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 1b0f8ae..adeaecd 100644 (file)
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -38,7 +38,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y

diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 5da76e0..bed7455 100644 (file)
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -40,7 +40,6 @@ CONFIG_PM_STD_PARTITION="/dev/hda3"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEBUG=y
 CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m

diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 3ce91a3..1d2d69d 100644 (file)
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -62,7 +62,6 @@ CONFIG_MPC8610_HPCD=y
 CONFIG_GEF_SBC610=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m

diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
index 9bdcf72..2fce54d 100644 (file)
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -25,7 +25,7 @@ CONFIG_SH_SH7785LCR=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_SH_CPU_FREQ=y
 CONFIG_HEARTBEAT=y

diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index d8b164a..15adef4 100644 (file)
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -37,14 +37,6 @@ config CPU_FREQ_STAT
 
          If in doubt, say N.
 
-config CPU_FREQ_STAT_DETAILS
-       bool "CPU frequency transition statistics details"
-       depends on CPU_FREQ_STAT
-       help
-         Show detailed CPU frequency transition table in sysfs.
-
-         If in doubt, say N.
-
 choice
        prompt "Default CPUFreq governor"
        default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ

diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index ac284e6..18abd45 100644 (file)
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -25,9 +25,7 @@ struct cpufreq_stats {
        unsigned int last_index;
        u64 *time_in_state;
        unsigned int *freq_table;
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
        unsigned int *trans_table;
-#endif
 };
 
 static int cpufreq_stats_update(struct cpufreq_stats *stats)
@@ -46,9 +44,7 @@ static void cpufreq_stats_clear_table(struct cpufreq_stats *stats)
        unsigned int count = stats->max_state;
 
        memset(stats->time_in_state, 0, count * sizeof(u64));
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
        memset(stats->trans_table, 0, count * count * sizeof(int));
-#endif
        stats->last_time = get_jiffies_64();
        stats->total_trans = 0;
 }
@@ -84,7 +80,6 @@ static ssize_t store_reset(struct cpufreq_policy *policy, const char *buf,
        return count;
 }
 
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
 {
        struct cpufreq_stats *stats = policy->stats;
@@ -129,7 +124,6 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
        return len;
 }
 cpufreq_freq_attr_ro(trans_table);
-#endif
 
 cpufreq_freq_attr_ro(total_trans);
 cpufreq_freq_attr_ro(time_in_state);
@@ -139,9 +133,7 @@ static struct attribute *default_attrs[] = {
        &total_trans.attr,
        &time_in_state.attr,
        &reset.attr,
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
        &trans_table.attr,
-#endif
        NULL
 };
 static struct attribute_group stats_attr_group = {
@@ -200,9 +192,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy)
 
        alloc_size = count * sizeof(int) + count * sizeof(u64);
 
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
        alloc_size += count * count * sizeof(int);
-#endif
 
        /* Allocate memory for time_in_state/freq_table/trans_table in one go */
        stats->time_in_state = kzalloc(alloc_size, GFP_KERNEL);
@@ -211,9 +201,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy)
 
        stats->freq_table = (unsigned int *)(stats->time_in_state + count);
 
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
        stats->trans_table = stats->freq_table + count;
-#endif
 
        stats->max_state = count;
 
@@ -259,8 +247,6 @@ void cpufreq_stats_record_transition(struct cpufreq_policy *policy,
        cpufreq_stats_update(stats);
 
        stats->last_index = new_index;
-#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
        stats->trans_table[old_index * stats->max_state + new_index]++;
-#endif
        stats->total_trans++;
 }