compatible = "amlogic, amlogic-new-usb3";
portnum = <0>;
reg = <0xd0078080 0x20>;
- interrupts = <0 16 4>;
- otg = <1>;
- gpio-vbus-power = "GPIOAO_5";
- gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
};
dwc2_a {
port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
usb-fifo = <728>;
cpu-type = "gxl";
- controller-type = <3>; /** 0: normal,1:host,2:device,3:otg*/
+ controller-type = <1>; /** 0: normal,1:host,2:device,3:otg*/
phy-reg = <0xd0078000>;
phy-reg-size = <0xa0>;
clocks = <&clkc CLKID_USB_GENERAL
compatible = "amlogic, amlogic-new-usb3";
portnum = <0>;
reg = <0xd0078080 0x20>;
- interrupts = <0 16 4>;
- otg = <1>;
- gpio-vbus-power = "GPIOAO_5";
- gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
};
dwc2_a {
port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
usb-fifo = <728>;
cpu-type = "gxl";
- controller-type = <3>; /** 0: normal,1:host,2:device,3:otg*/
+ controller-type = <1>; /** 0: normal,1:host,2:device,3:otg*/
phy-reg = <0xd0078000>;
phy-reg-size = <0xa0>;
clocks = <&clkc CLKID_USB_GENERAL
compatible = "amlogic, amlogic-new-usb3";
portnum = <0>;
reg = <0x0 0xd0078080 0x0 0x20>;
- interrupts = <0 16 4>;
- otg = <1>;
- gpio-vbus-power = "GPIOAO_5";
- gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
};
dwc2_a {
port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
usb-fifo = <728>;
cpu-type = "gxl";
- controller-type = <3>; /** 0: normal,1:host,2:device,3:otg*/
+ controller-type = <1>; /** 0: normal,1:host,2:device,3:otg*/
phy-reg = <0xd0078000>;
phy-reg-size = <0xa0>;
clocks = <&clkc CLKID_USB_GENERAL
compatible = "amlogic, amlogic-new-usb3";
portnum = <0>;
reg = <0x0 0xd0078080 0x0 0x20>;
- interrupts = <0 16 4>;
- otg = <1>;
- gpio-vbus-power = "GPIOAO_5";
- gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
};
dwc2_a {
port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
usb-fifo = <728>;
cpu-type = "gxl";
- controller-type = <3>; /** 0: normal,1:host,2:device,3:otg*/
+ controller-type = <1>; /** 0: normal,1:host,2:device,3:otg*/
phy-reg = <0xd0078000>;
phy-reg-size = <0xa0>;
clocks = <&clkc CLKID_USB_GENERAL