regulator: pf8x00: Add suspend support
authorChristoph Fritz <chf.fritz@googlemail.com>
Sun, 17 Jan 2021 20:49:17 +0000 (21:49 +0100)
committerMark Brown <broonie@kernel.org>
Mon, 25 Jan 2021 13:11:04 +0000 (13:11 +0000)
This patch adds suspend/resume support so that it is possible to
configure the LDOs and BUCKs as on or off during suspend phase as
well as to configure suspend specific voltages.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Link: https://lore.kernel.org/r/4c2e79d4fa96befdc9a6c59c3ff27b0a34f9fb56.camel@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/pf8x00-regulator.c

index 1e5582d..02892e0 100644 (file)
@@ -125,8 +125,12 @@ enum pf8x00_devid {
 #define PF8X00_DEVICE_FAM_MASK         GENMASK(7, 4)
 #define PF8X00_DEVICE_ID_MASK          GENMASK(3, 0)
 
-struct pf8x00_regulator {
+struct pf8x00_regulator_data {
        struct regulator_desc desc;
+       unsigned int suspend_enable_reg;
+       unsigned int suspend_enable_mask;
+       unsigned int suspend_voltage_reg;
+       unsigned int suspend_voltage_cache;
 };
 
 struct pf8x00_chip {
@@ -276,6 +280,53 @@ static int pf8x00_of_parse_cb(struct device_node *np,
        return 0;
 }
 
+static int pf8x00_suspend_enable(struct regulator_dev *rdev)
+{
+       struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+       struct regmap *rmap = rdev_get_regmap(rdev);
+
+       return regmap_update_bits(rmap, regl->suspend_enable_reg,
+                                 regl->suspend_enable_mask,
+                                 regl->suspend_enable_mask);
+}
+
+static int pf8x00_suspend_disable(struct regulator_dev *rdev)
+{
+       struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+       struct regmap *rmap = rdev_get_regmap(rdev);
+
+       return regmap_update_bits(rmap, regl->suspend_enable_reg,
+                                 regl->suspend_enable_mask, 0);
+}
+
+static int pf8x00_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+       struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+       int ret;
+
+       if (regl->suspend_voltage_cache == uV)
+               return 0;
+
+       ret = regulator_map_voltage_iterate(rdev, uV, uV);
+       if (ret < 0) {
+               dev_err(rdev_get_dev(rdev), "failed to map %i uV\n", uV);
+               return ret;
+       }
+
+       dev_dbg(rdev_get_dev(rdev), "uV: %i, reg: 0x%x, msk: 0x%x, val: 0x%x\n",
+               uV, regl->suspend_voltage_reg, regl->desc.vsel_mask, ret);
+       ret = regmap_update_bits(rdev->regmap, regl->suspend_voltage_reg,
+                                regl->desc.vsel_mask, ret);
+       if (ret < 0) {
+               dev_err(rdev_get_dev(rdev), "failed to set %i uV\n", uV);
+               return ret;
+       }
+
+       regl->suspend_voltage_cache = uV;
+
+       return 0;
+}
+
 static const struct regulator_ops pf8x00_ldo_ops = {
        .enable = regulator_enable_regmap,
        .disable = regulator_disable_regmap,
@@ -283,6 +334,9 @@ static const struct regulator_ops pf8x00_ldo_ops = {
        .list_voltage = regulator_list_voltage_table,
        .set_voltage_sel = regulator_set_voltage_sel_regmap,
        .get_voltage_sel = regulator_get_voltage_sel_regmap,
+       .set_suspend_enable = pf8x00_suspend_enable,
+       .set_suspend_disable = pf8x00_suspend_disable,
+       .set_suspend_voltage = pf8x00_set_suspend_voltage,
 };
 
 
@@ -295,6 +349,9 @@ static const struct regulator_ops pf8x00_buck1_6_ops = {
        .get_voltage_sel = regulator_get_voltage_sel_regmap,
        .get_current_limit = regulator_get_current_limit_regmap,
        .set_current_limit = regulator_set_current_limit_regmap,
+       .set_suspend_enable = pf8x00_suspend_enable,
+       .set_suspend_disable = pf8x00_suspend_disable,
+       .set_suspend_voltage = pf8x00_set_suspend_voltage,
 };
 
 static const struct regulator_ops pf8x00_buck7_ops = {
@@ -306,6 +363,8 @@ static const struct regulator_ops pf8x00_buck7_ops = {
        .get_voltage_sel = regulator_get_voltage_sel_regmap,
        .get_current_limit = regulator_get_current_limit_regmap,
        .set_current_limit = regulator_set_current_limit_regmap,
+       .set_suspend_enable = pf8x00_suspend_enable,
+       .set_suspend_disable = pf8x00_suspend_disable,
 };
 
 static const struct regulator_ops pf8x00_vsnvs_ops = {
@@ -337,6 +396,9 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
                        .disable_val = 0x0,                     \
                        .enable_mask = 2,                       \
                },                                              \
+               .suspend_enable_reg = (base) + LDO_CONFIG2,     \
+               .suspend_enable_mask = 1,                       \
+               .suspend_voltage_reg = (base) + LDO_STBY_VOLT,  \
        }
 
 #define PF8X00BUCK(_id, _name, base, voltages)                 \
@@ -367,6 +429,9 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
                        .enable_mask = 0x3,                     \
                        .enable_time = 500,                     \
                },                                              \
+               .suspend_enable_reg = (base) + SW_MODE1,        \
+               .suspend_enable_mask = 0xc,                     \
+               .suspend_voltage_reg = (base) + SW_STBY_VOLT,   \
        }
 
 #define PF8X00BUCK7(_name, base, voltages)                     \
@@ -415,7 +480,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
                },                                              \
        }
 
-static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
+static struct pf8x00_regulator_data pf8x00_regs_data[PF8X00_MAX_REGULATORS] = {
        PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages),
        PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages),
        PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages),
@@ -500,12 +565,12 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
        if (ret)
                return ret;
 
-       for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) {
-               struct pf8x00_regulator *data = &pf8x00_regulators_data[id];
+       for (id = 0; id < ARRAY_SIZE(pf8x00_regs_data); id++) {
+               struct pf8x00_regulator_data *data = &pf8x00_regs_data[id];
                struct regulator_dev *rdev;
 
                config.dev = chip->dev;
-               config.driver_data = chip;
+               config.driver_data = data;
                config.regmap = chip->regmap;
 
                rdev = devm_regulator_register(&client->dev, &data->desc, &config);