+++ /dev/null
-# Makefile for the Netwide Assembler under 16-bit DOS (aimed at Borland C)
-#
-# The Netwide Assembler is copyright (C) 1996 Simon Tatham and
-# Julian Hall. All rights reserved. The software is
-# redistributable under the licence given in the file "Licence"
-# distributed in the NASM archive.
-#
-# This makefile is made for compile NASM and NDISASM on a 16 bit dos
-# compiler like Microsoft C, or Borland C. This should work on all
-# verioson of Turbo C++ and Borland C++ from version 3.0 and upwords.
-# I'm not fully sure how it will handel on Microsoft C, but all the
-# switches are documented, and it shouldn't be a problem to change it
-# over.
-#
-# It does show a few of my preferances, like putting the OBJ files
-# in a seperate directory, but if you just set OBJD to '.', it will
-# drop them all in the current directory (though you still need to
-# make the directory it's self).
-#
-# Most everything is remarked, and explaned in full, it should be
-# easy to convert it to another compiler. I tried to make the devision
-# of information logical, and easy to follow.
-#
-# BEFORE YOU USE THIS MAKE FILE!!!
-#
-# Make sure the line below is set to the propper location of your standard
-# Libaries, if not you'll get some errors. Make sure to keep the trailing
-# backslash, as it's needed, and remeber to use \\ not \ as that will cause
-# some errors.
-#
-# Also inportant, if you get a DGROUP error when you compile NASM, remove
-# or comment out the 'NASMSize=l' line, and uncoment (remove the #) from the
-# NASMSize=h line. Then run 'make Clean' to delete the object files. Then run
-# make again to re-build NASM as huge.
-#
-# History:
-# 06/13/97: * Added the EXED varable for the location to put the EXE files.
-# * Because different versions of Borland and Turbo C have
-# different GROUPings for the DGROUP, some version, when you
-# compile NASM, you will get a DGROUP overflow error, making it
-# so NASM has to be compiled as huge. As this isn't a constant
-# through systems (and apperently some version of Borland,
-# compileing as huge causes some errors) the NASMSize verable
-# has been added to spicify what size of code you want to
-# compile as and defaults to large.
-# 06/16/97: * Added 'merge dupicate strings' to the options for compiles.
-
-NASMSize=l #Compile Nasm as Large
-#NASMSize=h #Compile Nasm as Huge
-
-LIB =c:\\tc\\lib\\ #location standard libaries
-
-OBJD=obj\\ #directory to put OBJ files in
-EXED=.\ #directory to put the EXE files.
-CC = tcc #compiler
-LINK = tlink #linker
-CCFLAGS = /d /c /O /A /m$(NASMSize) /n$(OBJD) #compiler flags for NASM
- #/d=merge dupicate strings
- #/c=compile only
- #/O=Optimise jumps
- #/A=ANSI standard C
- #/m$(NASMSize>=the model to use
- #/n$(OBJD)= put the OBJ files in the diectory given.
-
-DCCFLAGS = /d /c /O /A /mh /n$(OBJD) #compiler flags for NDISASM
- #/d=merge dupicate strings
- #/c=compile only
- #/O=Optimise jumps
- #/A=ANSI standard C
- #/mh=Model huge
- #/n$(OBJD)= put the OBJ files in the diectory given.
- #NOTE: Huge model is used, and the array in insnsd.c is large enough to
- #over size the d-group in large mode.
-
-LINKFLAGS = /c /x #linker flags
- #/c=case segnificance on symboles
- #/x=No map file at all
-
-LIBRARIES = #any libaries to add, out side of the standard libary
-EXE = .exe #executable file extention (keep the . as the start)
-OBJ = obj #OBJ file extention
-
-NASM_ASM=$(CC) $(CCFLAGS) $&.c #Command line for NASM
-DASM_ASM=$(CC) $(DCCFLAGS) $&.c #command line for NDISASM
-
-# NOTE: $& is used to create the file name, as it only gives the name it's
-# self, where as using $* would have give the full path of the file it
-# want's done. This becomes a problem if the OBJ files are in a seperate
-# directory, becuse it will then try to find the source file in the OBJ
-# dir.
-
-################################################################
-#The OBJ files that NASM is dependent on
-
-NASMOBJS = $(OBJD)nasm.$(OBJ) $(OBJD)nasmlib.$(OBJ) $(OBJD)float.$(OBJ) \
- $(OBJD)insnsa.$(OBJ) $(OBJD)assemble.$(OBJ) $(OBJD)labels.$(OBJ) \
- $(OBJD)parser.$(OBJ) $(OBJD)outform.$(OBJ) $(OBJD)preproc.$(OBJ) \
- $(OBJD)listing.$(OBJ) $(OBJD)eval.$(OBJ)
-
-################################################################
-#The OBJ files that NDISASM is dependent on
-
-NDISASMOBJS = $(OBJD)ndisasm.$(OBJ) $(OBJD)disasm.$(OBJ) $(OBJD)sync.$(OBJ) \
- $(OBJD)nasmlibd.$(OBJ) $(OBJD)insnsd.$(OBJ)
-
-################################################################
-#The OBJ file for the output formats.
-
-OUTOBJ= $(OBJD)outbin.$(OBJ) $(OBJD)outaout.$(OBJ) $(OBJD)outcoff.$(OBJ) \
- $(OBJD)outelf.$(OBJ) $(OBJD)outobj.$(OBJ) $(OBJD)outas86.$(OBJ) \
- $(OBJD)outrdf.$(OBJ) $(OBJD)outdbg.$(OBJ) $(OBJD)outrdf2.$(OBJ) \
- $(OBJD)outieee.$(OBJ)
-
-
-################################################################
-# Build everything
-
-all : nasm$(EXE) ndisasm$(EXE)
-
-################################################################
-#NASM, NDISASM compile, I hope it's self explanitorie
-
-nasm$(EXE): $(NASMOBJS) $(OUTOBJ)
- $(LINK) $(LINKFLAGS) @&&^ #command for the linker
- $(LIB)c0$(NASMSize).obj $(NASMOBJS) $(OUTOBJ) #OBJ file list
- $(EXED)nasm$(EXE) #EXE file name
-# No need of a map file
- $(LIB)c$(NASMSize).lib $(LIBRARIES) #Libaries needed
-^
-
-ndisasm$(EXE): $(NDISASMOBJS)
- $(LINK) $(LINKFLAGS) @&&^ #command for the linker
- $(LIB)c0h.obj $(NDISASMOBJS) #OBJ file list
- $(EXED)ndisasm$(EXE) #EXE file name
-# No need of a map file
- $(LIB)ch.lib $(LIBRARIES) #Libaries needed
-^
-
-################################################################
-# Dependencies for all of NASM's obj files
-
-$(OBJD)assemble.$(OBJ): assemble.c nasm.h version.h insnsi.h assemble.h insns.h
- $(NASM_ASM)
-
-$(OBJD)float.$(OBJ): float.c nasm.h version.h insnsi.h
- $(NASM_ASM)
-
-$(OBJD)labels.$(OBJ): labels.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)listing.$(OBJ): listing.c nasm.h version.h insnsi.h nasmlib.h listing.h
- $(NASM_ASM)
-
-$(OBJD)eval.$(OBJ): eval.c nasm.h version.h insnsi.h nasmlib.h eval.h
- $(NASM_ASM)
-
-$(OBJD)nasm.$(OBJ): nasm.c nasm.h version.h insnsi.h nasmlib.h parser.h assemble.h labels.h \
- listing.h outform.h
- $(NASM_ASM)
-
-$(OBJD)nasmlib.$(OBJ): nasmlib.c nasm.h version.h insnsi.h nasmlib.h names.c insnsn.c
- $(NASM_ASM)
-
-$(OBJD)parser.$(OBJ): parser.c nasm.h version.h insnsi.h nasmlib.h parser.h float.h names.c insnsn.c
- $(NASM_ASM)
-
-$(OBJD)preproc.$(OBJ): preproc.c macros.c preproc.h nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)insnsa.$(OBJ): insnsa.c nasm.h version.h insnsi.h insns.h
- $(NASM_ASM)
-
-################################################################
-# Dependencies for all of NDISASM's obj files
-
-$(OBJD)disasm.$(OBJ): disasm.c nasm.h version.h insnsi.h disasm.h sync.h insns.h names.c insnsn.c
- $(DASM_ASM)
-
-$(OBJD)ndisasm.$(OBJ): ndisasm.c nasm.h version.h insnsi.h sync.h disasm.h
- $(DASM_ASM)
-
-$(OBJD)sync.$(OBJ): sync.c sync.h
- $(DASM_ASM)
-
-$(OBJD)insnsd.$(OBJ): insnsd.c nasm.h version.h insnsi.h insns.h
- $(DASM_ASM)
-
-# This is a kludge from the word go, as we can't use the nasmlib.obj compiled
-# for NASM, as it's could be the wrong model size, so we have to compile it
-# again as huge to make sure.
-#
-# So as not to overwrite the nasmlib.obj for NASM (if it did, that
-# could cause all kinds of problems) it compiles it into nasmlibd.obj.
-#
-# the -o... switch tells it the name to compile the obj file to, right here
-# $(OBJD)nasmlibd.obj
-
-$(OBJD)nasmlibd.$(OBJ): nasmlib.c nasm.h version.h insnsi.h nasmlib.h
- $(CC) $(DCCFLAGS) -o$(OBJD)nasmlibd.obj nasmlib.c
-
-################################################################
-# Dependencies for all of the output format's OBJ files
-
-$(OBJD)outas86.$(OBJ): output/outas86.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)outaout.$(OBJ): output/outaout.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)outbin.$(OBJ): output/outbin.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)outcoff.$(OBJ): output/outcoff.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)outdbg.$(OBJ): output/outdbg.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)outelf.$(OBJ): output/outelf.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)outobj.$(OBJ): output/outobj.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)outrdf2.$(OBJ): output/outrdf2.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)outieee.$(OBJ): output/outieee.c nasm.h version.h insnsi.h nasmlib.h
- $(NASM_ASM)
-
-$(OBJD)outform.$(OBJ): outform.c outform.h nasm.h version.h insnsi.h
- $(NASM_ASM)
-
-################################################################
-# A quick way to delete the OBJ files as well as the binaries.
-
-clean :
- del $(OBJD)*.obj
- del nasm$(EXE)
- del ndisasm$(EXE)
-
-# Makefile created by Fox Cutter <lmb@comtch.iea.com> --01/27/97
--- /dev/null
+# Makefile for the Netwide Assembler under 16-bit DOS (aimed at Borland C)
+#
+# The Netwide Assembler is copyright (C) 1996 Simon Tatham and
+# Julian Hall. All rights reserved. The software is
+# redistributable under the licence given in the file "Licence"
+# distributed in the NASM archive.
+#
+# This makefile is made for compile NASM and NDISASM on a 16 bit dos
+# compiler like Microsoft C, or Borland C. This should work on all
+# verioson of Turbo C++ and Borland C++ from version 3.0 and upwords.
+# I'm not fully sure how it will handel on Microsoft C, but all the
+# switches are documented, and it shouldn't be a problem to change it
+# over.
+#
+# Most everything is remarked, and explaned in full, it should be
+# easy to convert it to another compiler. I tried to make the devision
+# of information logical, and easy to follow.
+#
+# BEFORE YOU USE THIS MAKE FILE!!!
+#
+# Make sure the line below is set to the propper location of your standard
+# Libaries, if not you'll get some errors. Make sure to keep the trailing
+# backslash, as it's needed, and remeber to use \\ not \ as that will cause
+# some errors.
+#
+# This Makefile was updated with NASM 0.98.31, and could compile that
+# version correctly using Borland C++ 3.1 under DOS.
+#
+
+CC = bcc #compiler
+#compiler flags
+CCFLAGS = -d -c -O1 -mh -DOF_ONLY -DOF_BIN -DOF_OBJ -DOF_WIN32 -DOF_AS86
+ # -d = merge dupicate strings
+ # -c = compile only
+ # -O1 = optimise for size
+ # -mh = model huge
+ # -n = put the OBJ files in the diectory given.
+
+LINKFLAGS = -d -mh
+
+LIBS = #any libaries to add, out side of the standard libary
+EXE = .exe #executable file extention (keep the . as the start)
+OBJ = obj #OBJ file extention
+LIB = lib #LIB file extension
+
+# Compilation command line
+NASM_ASM=$(CC) $(CCFLAGS) -o$*.$(OBJ) $*.c
+
+################################################################
+#The OBJ files that NASM is dependent on
+
+NASMOBJS = nasm.$(OBJ) nasmlib.$(OBJ) float.$(OBJ) \
+ insnsa.$(OBJ) assemble.$(OBJ) labels.$(OBJ) \
+ parser.$(OBJ) outform.$(OBJ) preproc.$(OBJ) \
+ listing.$(OBJ) eval.$(OBJ)
+
+################################################################
+#The OBJ files that NDISASM is dependent on
+
+NDISASMOBJS = ndisasm.$(OBJ) disasm.$(OBJ) sync.$(OBJ) \
+ nasmlib.$(OBJ) insnsd.$(OBJ)
+
+################################################################
+# The OBJ file for the output formats we want to compile in.
+# It doesn't make sense for 16-bit MS-DOS to include all formats.
+
+OUTOBJ= output\\outbin.$(OBJ) output\\outaout.$(OBJ) output\\outcoff.$(OBJ) \
+ output\\outelf.$(OBJ) output\\outobj.$(OBJ) output\\outas86.$(OBJ) \
+ output\\outrdf.$(OBJ) output\\outdbg.$(OBJ) output\\outrdf2.$(OBJ) \
+ output\\outieee.$(OBJ)
+
+
+################################################################
+# Build everything
+
+all : nasm$(EXE) ndisasm$(EXE)
+
+################################################################
+# NASM, NDISASM link. The &&!...! construct in Borland Make
+# creates a temporary file and inserts its name on the command
+# line. It works around the DOS 127-character command line
+# limit.
+
+nasm$(EXE): $(NASMOBJS) output\\out.lib
+ $(CC) $(LINKFLAGS) -onasm$(EXE) @&&!
+$(NASMOBJS)
+output\\out.lib
+!
+
+ndisasm$(EXE): $(NDISASMOBJS)
+ $(CC) $(LINKFLAGS) -ondisasm$(EXE) @&&!
+$(NDISASMOBJS)
+!
+
+################################################################
+# Dependencies for all of NASM's obj files
+
+assemble.$(OBJ): assemble.c nasm.h version.h insnsi.h assemble.h insns.h
+ $(NASM_ASM)
+
+float.$(OBJ): float.c nasm.h version.h insnsi.h
+ $(NASM_ASM)
+
+labels.$(OBJ): labels.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+listing.$(OBJ): listing.c nasm.h version.h insnsi.h nasmlib.h listing.h
+ $(NASM_ASM)
+
+eval.$(OBJ): eval.c nasm.h version.h insnsi.h nasmlib.h eval.h
+ $(NASM_ASM)
+
+nasm.$(OBJ): nasm.c nasm.h version.h insnsi.h nasmlib.h parser.h assemble.h labels.h \
+ listing.h outform.h
+ $(NASM_ASM)
+
+nasmlib.$(OBJ): nasmlib.c nasm.h version.h insnsi.h nasmlib.h names.c insnsn.c
+ $(NASM_ASM)
+
+parser.$(OBJ): parser.c nasm.h version.h insnsi.h nasmlib.h parser.h float.h names.c insnsn.c
+ $(NASM_ASM)
+
+preproc.$(OBJ): preproc.c macros.c preproc.h nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+insnsa.$(OBJ): insnsa.c nasm.h version.h insnsi.h insns.h
+ $(NASM_ASM)
+
+################################################################
+# Dependencies for all of NDISASM's obj files
+
+disasm.$(OBJ): disasm.c nasm.h version.h insnsi.h disasm.h sync.h insns.h names.c insnsn.c
+ $(NASM_ASM)
+
+ndisasm.$(OBJ): ndisasm.c nasm.h version.h insnsi.h sync.h disasm.h
+ $(NASM_ASM)
+
+sync.$(OBJ): sync.c sync.h
+ $(NASM_ASM)
+
+insnsd.$(OBJ): insnsd.c nasm.h version.h insnsi.h insns.h
+ $(NASM_ASM)
+
+################################################################
+# Build the output formats as a library
+# The & ... $? construct tells Borland Make to repeat for all
+# out of date dependencies
+output\\out.$(LIB): $(OUTOBJ)
+ -del output\\out.$(LIB)
+ for %a in (output\\*.obj) do tlib /C output\\out.$(LIB) +%a
+
+################################################################
+# Dependencies for all of the output format's OBJ files
+
+output\\outas86.$(OBJ): output\\outas86.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+output\\outaout.$(OBJ): output\\outaout.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+output\\outbin.$(OBJ): output\\outbin.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+output\\outcoff.$(OBJ): output\\outcoff.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+output\\outdbg.$(OBJ): output\\outdbg.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+output\\outelf.$(OBJ): output\\outelf.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+output\\outobj.$(OBJ): output\\outobj.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+output\\outrdf.$(OBJ): output\\outrdf.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+output\\outrdf2.$(OBJ): output\\outrdf2.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+output\\outieee.$(OBJ): output\\outieee.c nasm.h version.h insnsi.h nasmlib.h
+ $(NASM_ASM)
+
+outform.$(OBJ): outform.c outform.h nasm.h version.h insnsi.h
+ $(NASM_ASM)
+
+################################################################
+# A quick way to delete the OBJ files as well as the binaries.
+
+clean :
+ -del *.$(OBJ)
+ -del output\\*.$(OBJ)
+ -del output\\out.$(LIB)
+ -del nasm$(EXE)
+ -del ndisasm$(EXE)
--- /dev/null
+# Makefile for the Netwide Assembler under 16-bit DOS
+#
+# The Netwide Assembler is copyright (C) 1996 Simon Tatham and
+# Julian Hall. All rights reserved. The software is
+# redistributable under the licence given in the file "Licence"
+# distributed in the NASM archive.
+#
+# This Makefile is designed to build NASM using a 16-bit DOS C
+# compiler such as Microsoft C, provided you have a compatible MAKE.
+# It's been tested with Microsoft C 5.x plus Borland Make. (Yes, I
+# know it's silly, but...)
+
+# update: MSC 5.1 will not compile 'nasmlib.c' (arg lists don't match)
+# MSC 6.00A will not compile 'insnsa.c' (qcl is required)
+# MSC 7.00 will compile all
+#
+# GNU software compiled by DJGPP is also required:
+#
+# grep 2.4
+# perl 5.6.1
+#
+# Source and DOS/Windows binaries may be downloaded from:
+#
+# ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/
+#
+# Compilation has been tested under Windows 98 & Windows 2000
+# MSC 7.00 & DJGPP applications require a DPMI interface, which is
+# a part of MSC 7.00 under DOS. It is also a part of Windows.
+#
+#
+# For a 16-bit compiler, we don't need all the formats
+#
+CONFIG = -DOF_ONLY -DOF_BIN -DOF_OBJ -DOF_WIN32 -DOF_AS86
+
+#CC = cl /c /O /AL /Gt
+# Compile for a 286, ain't nobody using an 8086 anymore
+CC = cl /c /Oz /AL /Gt256 /G2 /I.. # MSC 7.00
+
+#QCL = qcl /c /AL /Gt
+QCL = $(CC) # MSC 7.00
+
+LINK = link
+LINKFLAGS = /F4000 /Fm
+LIBRARIES =
+EXE = .exe#
+OBJ = obj#
+
+.c.$(OBJ):
+ $(CC) $(CONFIG) /Fo$@ $*.c
+
+NASMOBJS1 = nasm.$(OBJ) nasmlib.$(OBJ) float.$(OBJ) insnsa.$(OBJ) \
+ assemble.$(OBJ) labels.$(OBJ) parser.$(OBJ) outform.$(OBJ)
+NASMOBJS2 = output\outbin.$(OBJ) output\outaout.$(OBJ) output\outcoff.$(OBJ)
+NASMOBJS3 = output\outelf.$(OBJ) output\outobj.$(OBJ) output\outas86.$(OBJ)
+NASMOBJS4 = output\outrdf.$(OBJ) output\outrdf2.$(OBJ) output\outieee.$(OBJ)
+NASMOBJS5 = output\outdbg.$(OBJ) preproc.$(OBJ) listing.$(OBJ) eval.$(OBJ)
+
+NASMOBJS = $(NASMOBJS1) $(NASMOBJS2) $(NASMOBJS3) $(NASMOBJS4) $(NASMOBJS5)
+
+NDISASMOBJS = ndisasm.$(OBJ) disasm.$(OBJ) sync.$(OBJ) nasmlib.$(OBJ) \
+ insnsd.$(OBJ)
+
+all : nasm$(EXE) ndisasm$(EXE)
+
+# We have to have a horrible kludge here to get round the 128 character
+# limit, as usual...
+LINKOBJS = a*.obj e*.obj f*.obj insnsa.obj l*.obj na*.obj o*.obj p*.obj
+nasm$(EXE): $(NASMOBJS)
+ echo $(NASMOBJS1) + >foo
+ echo $(NASMOBJS2) + >>foo
+ echo $(NASMOBJS3) + >>foo
+ echo $(NASMOBJS4) + >>foo
+ echo $(NASMOBJS5) >> foo
+ $(LINK) /st:4096 @foo,nasm;
+
+ndisasm$(EXE): $(NDISASMOBJS)
+ $(LINK) $(NDISASMOBJS), ndisasm;
+
+output\nasm.h: nasm.h
+ copy nasm.h output
+
+output\insnsi.h: insnsi.h
+ copy insnsi.h output
+
+output\nasmlib.h: nasmlib.h
+ copy nasmlib.h output
+
+output\outform.h: outform.h
+ copy outform.h output
+
+
+assemble.$(OBJ): assemble.c nasm.h insnsi.h assemble.h insns.h
+disasm.$(OBJ): disasm.c nasm.h insnsi.h disasm.h sync.h insns.h names.c insnsn.c
+eval.$(OBJ): eval.c eval.h nasm.h insnsi.h nasmlib.h
+float.$(OBJ): float.c nasm.h insnsi.h
+labels.$(OBJ): labels.c nasm.h insnsi.h nasmlib.h
+listing.$(OBJ): listing.c nasm.h insnsi.h nasmlib.h listing.h
+nasm.$(OBJ): nasm.c nasm.h insnsi.h nasmlib.h parser.h assemble.h labels.h \
+ listing.h outform.h
+nasmlib.$(OBJ): nasmlib.c nasm.h insnsi.h nasmlib.h names.c insnsn.c
+ndisasm.$(OBJ): ndisasm.c nasm.h insnsi.h sync.h disasm.h
+outform.$(OBJ): outform.c outform.h nasm.h insnsi.h
+output\outas86.$(OBJ): output\outas86.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+output\outaout.$(OBJ): output\outaout.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+output\outbin.$(OBJ): output\outbin.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+output\outcoff.$(OBJ): output\outcoff.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+output\outdbg.$(OBJ): output\outdbg.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+output\outelf.$(OBJ): output\outelf.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+output\outobj.$(OBJ): output\outobj.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+output\outrdf.$(OBJ): output\outrdf.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+output\outrdf2.$(OBJ): output\outrdf2.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+output\outieee.$(OBJ): output\outieee.c output\nasm.h output\insnsi.h output\nasmlib.h output\outform.h
+parser.$(OBJ): parser.c nasm.h insnsi.h nasmlib.h parser.h float.h names.c insnsn.c
+preproc.$(OBJ): preproc.c macros.c preproc.h nasm.h insnsi.h nasmlib.h
+sync.$(OBJ): sync.c sync.h
+
+
+insnsa.c insnsd.c insnsi.h insnsn.c: insns16.dat insns.pl
+ perl insns.pl insns16.dat
+
+insns16.dat: insns.dat
+ grep -v WILLAMETTE insns.dat | grep -v KATMAI | grep -v SSE | \
+ grep -v MMX | grep -v 3DNOW | grep -v UNDOC >insns16.dat
+
+# Another grotty hack: QC is less likely to run out of memory than
+# CL proper; and we don't need any optimisation in these modules
+# since they're just data.
+insnsa.$(OBJ): insnsa.c nasm.h insnsi.h insns.h
+ $(QCL) insnsa.c
+
+insnsd.$(OBJ): insnsd.c nasm.h insnsi.h insns.h
+ $(QCL) insnsd.c
+
+tidy:
+ del output\*.h
+ del *.$(OBJ)
+ del output\*.$(OBJ)
+
+clean : tidy
+ del nasm$(EXE)
+ del ndisasm$(EXE)
+
+spotless: clean
+ del insns16.dat
+ del insnsa.c
+ del insnsd.c
+ del insnsi.h
+ del insnsn.c
+
These are pre-created Makefiles for various platforms, use them if
GNU autoconf/automake packages are not supported on your system.
-Copy appropriate Makefile to ../Makefile and run make.
+Copy appropriate Makefile to ../Makefile, look at it to see if there
+are any edits that need to be made, and run make.
+
+Some of these Makefiles have been contributed by end users, and the
+NASM team has no way of knowing if they work correctly or not. For
+that reason, there are sometimes multiple Makefiles for the same
+platform. Look at the comments at the beginning to help select a
+Makefile for your particular system.
+
+
+The Makefiles are:
+
+ Filename Target Compiler Notes
+ ---------------------------------------------------------------------------
+ Makefile.b32 Win32 Borland C++
+ Makefile.bc3 16-bit DOS Borland C++ working as of NASM 0.98.31
+ Makefile.bor 16-bit DOS Turbo C probably obsolete
+ Makefile.dj 32-bit DOS DJGPP
+ Makefile.djo 32-bit DOS DJGPP "Opus Make" version
+ Makefile.dl 32-bit DOS cc386 cc386 by David Lindauer
+ Makefile.dos 16-bit DOS MSC 5 probably obsolete
+ Makefile.ms7 16-bit DOS MSC 7 working as of NASM 0.98.31
+ Makefile.os2 OS/2 Warp Borland C++
+ Makefile.sc 32-bit DOS Symantec C++ 7
+ Makefile.scw Win32 Symantec C++ 7
+ Makefile.unx Unix cc use if "configure" fails
+ Makefile.vc Win32 MS Visual C++
+ Makefile.wcw Win32 Watcom C
projects / platform / upstream / nasm.git / commitdiff