staging: iio: light: fix block comments according to kernel coding style

Add the trailing */ accordingly to suit the preferred way of placing
block comments.

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index 6c9d943..03dbfb6 100644 (file)
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -320,8 +320,10 @@ static ssize_t show_prox_infrared_suppression(struct device *dev,
        struct iio_dev *indio_dev = dev_to_iio_dev(dev);
        struct isl29018_chip *chip = iio_priv(indio_dev);
 
-       /* return the "proximity scheme" i.e. if the chip does on chip
-       infrared suppression (1 means perform on chip suppression) */
+       /*
+        * return the "proximity scheme" i.e. if the chip does on chip
+        * infrared suppression (1 means perform on chip suppression)
+        */
        return sprintf(buf, "%d\n", chip->prox_scheme);
 }
 
@@ -340,8 +342,10 @@ static ssize_t store_prox_infrared_suppression(struct device *dev,
                return -EINVAL;
        }
 
-       /* get the  "proximity scheme" i.e. if the chip does on chip
-       infrared suppression (1 means perform on chip suppression) */
+       /*
+        * get the  "proximity scheme" i.e. if the chip does on chip
+        * infrared suppression (1 means perform on chip suppression)
+        */
        mutex_lock(&chip->lock);
        chip->prox_scheme = val;
        mutex_unlock(&chip->lock);

diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
index 625a11c..5fc4110 100644 (file)
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -240,8 +240,10 @@ static int taos_get_lux(struct iio_dev *indio_dev)
                }
        }
 
-       /* clear status, really interrupt status (interrupts are off), but
-        * we use the bit anyway - don't forget 0x80 - this is a command*/
+       /*
+        * clear status, really interrupt status (interrupts are off), but
+        * we use the bit anyway - don't forget 0x80 - this is a command
+        */
        ret = i2c_smbus_write_byte(chip->client,
                                   (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN |
                                    TSL258X_CMD_ALS_INT_CLR));
@@ -429,8 +431,10 @@ static int taos_chip_on(struct iio_dev *indio_dev)
        chip->als_saturation = als_count * 922; /* 90% of full scale */
        chip->als_time_scale = (als_time + 25) / 50;
 
-       /* TSL258x Specific power-on / adc enable sequence
-        * Power on the device 1st. */
+       /*
+        * TSL258x Specific power-on / adc enable sequence
+        * Power on the device 1st.
+        */
        utmp = TSL258X_CNTL_PWR_ON;
        ret = i2c_smbus_write_byte_data(chip->client,
                                        TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
@@ -439,8 +443,10 @@ static int taos_chip_on(struct iio_dev *indio_dev)
                return ret;
        }
 
-       /* Use the following shadow copy for our delay before enabling ADC.
-        * Write all the registers. */
+       /*
+        * Use the following shadow copy for our delay before enabling ADC.
+        * Write all the registers.
+        */
        for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) {
                ret = i2c_smbus_write_byte_data(chip->client,
                                                TSL258X_CMD_REG + i,
@@ -453,8 +459,10 @@ static int taos_chip_on(struct iio_dev *indio_dev)
        }
 
        usleep_range(3000, 3500);
-       /* NOW enable the ADC
-        * initialize the desired mode of operation */
+       /*
+        * NOW enable the ADC
+        * initialize the desired mode of operation
+        */
        utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL;
        ret = i2c_smbus_write_byte_data(chip->client,
                                        TSL258X_CMD_REG | TSL258X_CNTRL,
@@ -704,8 +712,10 @@ static ssize_t taos_luxtable_show(struct device *dev,
                                  taos_device_lux[i].ch0,
                                  taos_device_lux[i].ch1);
                if (taos_device_lux[i].ratio == 0) {
-                       /* We just printed the first "0" entry.
-                        * Now get rid of the extra "," and break. */
+                       /*
+                        * We just printed the first "0" entry.
+                        * Now get rid of the extra "," and break.
+                        */
                        offset--;
                        break;
                }