packaging: u-boot-rpi3: remove unnecessary files

Remove unnecessary files. It was used to boot with optee.
But it doesn't use anymore because trust-firmware doesn't support.

Change-Id: I115ba5e6099b624a2113b8cdf1934699f31b6757
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/packaging/u-boot-rpi3.spec b/packaging/u-boot-rpi3.spec
index 38984ba..bebb568 100644 (file)
--- a/packaging/u-boot-rpi3.spec
+++ b/packaging/u-boot-rpi3.spec
@@ -13,19 +13,6 @@ BuildRequires: gcc >= 6.0
 BuildRequires: flex
 BuildRequires: bison
 
-# NOTE
-# - If someone want to build u-boot-rpi3 with gbs system, it needs to build with below sequence.
-# 1. Do the local build with gbs command
-#      e.g) gbs build -A aarch64 --buildroot=~/GBS-UBOOT-RPI3 --profile=profile.tizen_unifiled
-# 2. You have to clone "platform/adaptation/rpi3/arm-trusted-firmware-rpi3"
-#      a. git clone <id>@review.tizen.org:29418/platform/adaptation/rpi3/arm-trusted-firmware-rpi3
-# 3. Do the local gbs build about arm-trusted-firmware-rpi3 with u-boot-rpi3 image what is built locally.
-#      a. set to local repo in gbs config file
-#       e.g)  [repo.local]
-#              url = ~/GBS-UBOOT-RPI3/local/repos/tizen_unified/RPMS
-# Refer to below link aobut gbs configuration file.
-# https://source.tizen.org/documetation/reference/git-build-system/configuration-file
-
 %description
 u-boot - Tizen bootloader for RPI3 boards based
 
@@ -66,11 +53,6 @@ make HOSTCC="gcc $RPM_OPT_FLAGS" envtools
 export PATH="$PATH:tools:tools/dtc/"
 make %{?_smp_mflags} EXTRAVERSION=`echo %{vcs} | sed 's/.*u-boot.*#\(.\{9\}\).*/-g\1-TIZEN.org/'`
 
-# Build u-boot-spl
-as board/raspberrypi/rpi/head.S -o head.o
-objcopy -O binary head.o head.bin
-cat head.bin spl/u-boot-spl.bin > u-boot-spl.bin
-
 # Generate params.bin
 cp `find ./env -name "built-in.o"` copy_env_common.o
 objcopy -O binary --only-section=.rodata.default_environment `find . -name "copy_env_common.o"`
@@ -92,14 +74,10 @@ install -p -m 0755 tools/dtc/dtc %{buildroot}%{_bindir}
 ( cd %{buildroot}%{_bindir}; ln -sf fw_printenv fw_setenv )
 
 # u-boot installation
-mkdir -p %{buildroot}/boot/spl
+mkdir -p %{buildroot}/boot
 install -m 755 u-boot.bin %{buildroot}/boot/
 install -m 755 uboot.env %{buildroot}/boot/
 install -m 755 boot.scr.uimg %{buildroot}/boot/
-install -m 755 u-boot-spl.bin %{buildroot}/boot/
-install -m 755 u-boot-nodtb.bin %{buildroot}/boot/spl/
-install -m 755 board/raspberrypi/rpi/fit_spl_atf.its %{buildroot}/boot/spl/
-install -m 755 arch/arm/dts/bcm2837-rpi-3-b.dtb %{buildroot}/boot/spl/
 
 %clean
 
@@ -109,10 +87,6 @@ install -m 755 arch/arm/dts/bcm2837-rpi-3-b.dtb %{buildroot}/boot/spl/
 /boot/u-boot.bin
 /boot/uboot.env
 /boot/boot.scr.uimg
-/boot/u-boot-spl.bin
-/boot/spl/u-boot-nodtb.bin
-/boot/spl/fit_spl_atf.its
-/boot/spl/bcm2837-rpi-3-b.dtb
 
 %files -n u-boot-tools
 %manifest u_boot_rpi3.manifest