+Thu Apr 29 00:03:59 1993 Fred Fish (fnf@cygnus.com)
+
+ * defs.h (CC_HAS_LONG_LONG): Set up to define CC_HAS_LONG_LONG
+ when compiling with gcc, but disable it for now. See comment.
+ * defs.h (LONGEST): Define as either "long" or "long long"
+ based on CC_HAS_LONG_LONG.
+ * defs.h (longest_to_int): Use CC_HAS_LONG_LONG to control
+ how longest_to_int is defined.
+ * c-valprint.c (c_val_print): Call print_longest.
+ * expprint.c (dump_expression): Use PRINTF_HAS_LONG_LONG
+ instead of LONG_LONG.
+ * {printcmd.c, gdbtypes.h} (LONG_LONG): Replace usages with
+ CC_HAS_LONG_LONG.
+ * printcmd.c (print_scalar_formatted): Call print_longest
+ and let it figure out what to do for PRINTF_HAS_LONG_LONG.
+ * typeprint.c (print_type_scalar): Call print_longest and let
+ it figure out what to do for PRINTF_HAS_LONG_LONG.
+ * valprint.c (val_print_type_code_int): Call print_longest
+ and let it figure out what to do for PRINTF_HAS_LONG_LONG.
+ * stabsread.c (LONG_LONG): Replace usages with CC_HAS_LONG_LONG.
+ * value.h (struct value): Replace usage of LONG_LONG with
+ CC_HAS_LONG_LONG.
+ * value.h (print_longest): Add prototype.
+ * values.c (LONG_LONG): Replace usages with CC_HAS_LONG_LONG.
+ * values.c (unpack_double): Collapse code that was unnecessarily
+ dependent on CC_HAS_LONG_LONG. Use LONGEST instead of direct types.
+ * values.c (value_from_longest): Remove dependency on
+ CC_HAS_LONG_LONG and just use LONGEST.
+ * solib.c (solib_map_sections): Use bfd_get_filename
+ to access filename field.
+ * solib.c (clear_solib): Save filename and free it later, after
+ bfd_close, since bfd_close may reference it. Use bfd_get_filename
+ to access the field.
+ * config/convex/xm-convex.h (LONG_LONG): Replace with
+ CC_HAS_LONG_LONG. Add define for PRINTF_HAS_LONG_LONG.
+ * doc/gdbint.texinfo (LONG_LONG): Replace with CC_HAS_LONG_LONG.
+ Add PRINTF_HAS_LONG_LONG references.
+
Wed Apr 28 06:11:38 1993 Jim Kingdon (kingdon@cygnus.com)
* inflow.c (kill_command), infcmd.c (attach_command),
#define TARGET_PTR_BIT TARGET_INT_BIT
#endif
-/* Convert a LONGEST to an int. This is used in contexts (e.g. number
- of arguments to a function, number in a value history, register
- number, etc.) where the value must not be larger than can fit
- in an int. */
-#if !defined (longest_to_int)
-#if defined (LONG_LONG)
-#define longest_to_int(x) (((x) > INT_MAX || (x) < INT_MIN) \
- ? (error ("Value out of range."),0) : (int) (x))
-#else /* No LONG_LONG. */
-/* Assume sizeof (int) == sizeof (long). */
-#define longest_to_int(x) ((int) (x))
-#endif /* No LONG_LONG. */
-#endif /* No longest_to_int. */
-
-/* This should not be a typedef, because "unsigned LONGEST" needs
- to work. LONG_LONG is defined if the host has "long long". */
+/* Default to support for "long long" if the host compiler being used is gcc.
+ Config files must define CC_HAS_LONG_LONG to use other host compilers
+ that are capable of supporting "long long", and to cause gdb to use that
+ support. Not defining CC_HAS_LONG_LONG will suppress use of "long long"
+ regardless of what compiler is used.
+
+ FIXME: For now, automatic selection of "long long" as the default when
+ gcc is used is disabled, pending further testing. Concerns include the
+ impact on gdb performance and the universality of bugfree long long
+ support on platforms that do have gcc. Compiling with FORCE_LONG_LONG
+ will select "long long" use for testing purposes. -fnf */
+
+#ifndef CC_HAS_LONG_LONG
+# if defined (__GNUC__) && defined (FORCE_LONG_LONG) /* See FIXME above */
+# define CC_HAS_LONG_LONG 1
+# endif
+#endif
+
+/* LONGEST should not be a typedef, because "unsigned LONGEST" needs to work.
+ CC_HAS_LONG_LONG is defined if the host compiler supports "long long"
+ variables and we wish to make use of that support. */
#ifndef LONGEST
-# ifdef LONG_LONG
-# define LONGEST long long
-# else
-# define LONGEST long
-# endif
+# ifdef CC_HAS_LONG_LONG
+# define LONGEST long long
+# else
+# define LONGEST long
+# endif
+#endif
+
+/* Convert a LONGEST to an int. This is used in contexts (e.g. number of
+ arguments to a function, number in a value history, register number, etc.)
+ where the value must not be larger than can fit in an int. */
+
+#ifndef longest_to_int
+# ifdef CC_HAS_LONG_LONG
+# define longest_to_int(x) (((x) > INT_MAX || (x) < INT_MIN) \
+ ? (error ("Value out of range."),0) : (int) (x))
+# else
+ /* Assume sizeof (int) == sizeof (long). */
+# define longest_to_int(x) ((int) (x))
+# endif
#endif
/* If we picked up a copy of CHAR_BIT from a configuration file
#ifndef PSIGNAL_IN_SIGNAL_H
extern void
-psignal PARAMS ((unsigned, char *));
+psignal PARAMS ((unsigned, const char *));
#endif
/* For now, we can't include <stdlib.h> because it conflicts with
if (len <= sizeof (LONGEST))
{
/* We can print it in decimal. */
- fprintf_filtered
- (stream,
-#if defined (LONG_LONG)
- "%llu",
-#else
- "%lu",
-#endif
- unpack_long (BUILTIN_TYPE_LONGEST, first_addr));
+ print_longest (stream, 'u', 0,
+ unpack_long (BUILTIN_TYPE_LONGEST, first_addr));
}
else
{
#ifdef PRINT_TYPELESS_INTEGER
PRINT_TYPELESS_INTEGER (stream, type, unpack_long (type, valaddr));
#else
- fprintf_filtered (stream, TYPE_UNSIGNED (type) ?
-#if defined (LONG_LONG)
- "%llu" : "%lld",
-#else
- "%u" : "%d",
-#endif
- unpack_long (type, valaddr));
+ print_longest (stream, TYPE_UNSIGNED (type) ? 'u' : 'd', 0,
+ unpack_long (type, valaddr));
#endif
}
}
+/* Print a number according to FORMAT which is one of d,u,x,o,b,h,w,g.
+ The raison d'etre of this function is to consolidate printing of LONG_LONG's
+ into this one function. Some platforms have long longs but don't have a
+ printf() that supports "ll" in the format string. We handle these by seeing
+ if the number is actually a long, and if not we just bail out and print the
+ number in hex. The format chars b,h,w,g are from
+ print_scalar_formatted(). USE_LOCAL says whether or not to call the
+ local formatting routine to get the format. */
+
+void
+print_longest (stream, format, use_local, val_long)
+ FILE *stream;
+ char format;
+ int use_local;
+ LONGEST val_long;
+{
+#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
+ long vtop, vbot;
+
+ vtop = val_long >> (sizeof (long) * HOST_CHAR_BIT);
+ vbot = (long) val_long;
+
+ if ((format == 'd' && (val_long < INT_MIN || val_long > INT_MAX))
+ || ((format == 'u' || format == 'x') && val_long > UINT_MAX))
+ {
+ fprintf_filtered (stream, "0x%x%08x", vtop, vbot);
+ return;
+ }
+#endif
+
+#ifdef PRINTF_HAS_LONG_LONG
+ switch (format)
+ {
+ case 'd':
+ fprintf_filtered (stream,
+ use_local ? local_decimal_format_custom ("ll")
+ : "%lld",
+ val_long);
+ break;
+ case 'u':
+ fprintf_filtered (stream, "%llu", val_long);
+ break;
+ case 'x':
+ fprintf_filtered (stream,
+ use_local ? local_hex_format_custom ("ll")
+ : "%llx",
+ val_long);
+ break;
+ case 'o':
+ fprintf_filtered (stream,
+ use_local ? local_octal_format_custom ("ll")
+ : "%llo",
+ break;
+ case 'b':
+ fprintf_filtered (stream, local_hex_format_custom ("02ll"), val_long);
+ break;
+ case 'h':
+ fprintf_filtered (stream, local_hex_format_custom ("04ll"), val_long);
+ break;
+ case 'w':
+ fprintf_filtered (stream, local_hex_format_custom ("08ll"), val_long);
+ break;
+ case 'g':
+ fprintf_filtered (stream, local_hex_format_custom ("016ll"), val_long);
+ break;
+ default:
+ abort ();
+ }
+#else /* !PRINTF_HAS_LONG_LONG */
+ /* In the following it is important to coerce (val_long) to a long. It does
+ nothing if !LONG_LONG, but it will chop off the top half (which we know
+ we can ignore) if the host supports long longs. */
+
+ switch (format)
+ {
+ case 'd':
+ fprintf_filtered (stream,
+ use_local ? local_decimal_format_custom ("l")
+ : "%ld",
+ (long) val_long);
+ break;
+ case 'u':
+ fprintf_filtered (stream, "%lu", (unsigned long) val_long);
+ break;
+ case 'x':
+ fprintf_filtered (stream,
+ use_local ? local_hex_format_custom ("l")
+ : "%lx",
+ (long) val_long);
+ break;
+ case 'o':
+ fprintf_filtered (stream,
+ use_local ? local_octal_format_custom ("l")
+ : "%lo",
+ (long) val_long);
+ break;
+ case 'b':
+ fprintf_filtered (stream, local_hex_format_custom ("02l"),
+ (long) val_long);
+ break;
+ case 'h':
+ fprintf_filtered (stream, local_hex_format_custom ("04l"),
+ (long) val_long);
+ break;
+ case 'w':
+ fprintf_filtered (stream, local_hex_format_custom ("08l"),
+ (long) val_long);
+ break;
+ case 'g':
+ fprintf_filtered (stream, local_hex_format_custom ("016l"),
+ (long) val_long);
+ break;
+ default:
+ abort ();
+ }
+#endif /* !PRINTF_HAS_LONG_LONG */
+}
+
/* Print a floating point value of type TYPE, pointed to in GDB by VALADDR,
on STREAM. */
}
}
+/* Print a string from the inferior, starting at ADDR and printing up to LEN
+ characters, to STREAM. If LEN is zero, printing stops at the first null
+ byte, otherwise printing proceeds (including null bytes) until either
+ print_max or LEN characters have been printed.
+
+ Always fetch print_max+1 characters, even though LA_PRINT_STRING might want
+ to print more or fewer (with repeated characters). This is so that we
+ don't spend forever fetching if we print a long string consisting of the
+ same character repeated. Also so we can do it all in one memory operation,
+ which is faster. However, this will be slower if print_max is set high,
+ e.g. if you set print_max to 1000, not only will it take a long time to
+ fetch short strings, but if you are near the end of the address space, it
+ might not work.
+
+ If the number of characters we actually print is limited because of hitting
+ print_max, when LEN would have explicitly or implicitly (in the case of a
+ null terminated string with another non-null character available to print)
+ allowed us to print more, we print ellipsis ("...") after the printed string
+ to indicate that more characters were available to print but that we were
+ limited by print_max. To do this correctly requires that we always fetch
+ one more than the number of characters we could potentially print, so that
+ if we do print the maximum number, we can tell whether or not a null byte
+ would have been the next character, in the case of C style strings.
+ For non-C style strings, only the value of LEN is pertinent in deciding
+ whether or not to print ellipsis.
+
+ FIXME: If LEN is nonzero and less than print_max, we could get away
+ with only fetching the specified number of characters from the inferior. */
+
int
-val_print_string (addr, stream)
+val_print_string (addr, len, stream)
CORE_ADDR addr;
+ unsigned int len;
FILE *stream;
{
- int first_addr_err;
+ int first_addr_err = 0; /* Nonzero if first address out of bounds */
+ int force_ellipsis = 0; /* Force ellipsis to be printed if nonzero */
int errcode;
unsigned char c;
char *string;
- int force_ellipses;
- unsigned int i = 0; /* Number of characters printed. */
/* Get first character. */
errcode = target_read_memory (addr, (char *)&c, 1);
/* First address out of bounds. */
first_addr_err = 1;
}
- else
+ else if (print_max < UINT_MAX)
{
- first_addr_err = 0;
- /* A real string. */
- string = (char *) alloca (print_max);
+ string = (char *) alloca (print_max + 1);
+ memset (string, 0, print_max + 1);
- /* If the loop ends by us hitting print_max characters,
- we need to have elipses at the end. */
- force_ellipses = 1;
-
- /* This loop always fetches print_max characters, even
- though LA_PRINT_STRING might want to print more or fewer
- (with repeated characters). This is so that
- we don't spend forever fetching if we print
- a long string consisting of the same character
- repeated. Also so we can do it all in one memory
- operation, which is faster. However, this will be
- slower if print_max is set high, e.g. if you set
- print_max to 1000, not only will it take a long
- time to fetch short strings, but if you are near
- the end of the address space, it might not work. */
QUIT;
- errcode = target_read_memory (addr, string, print_max);
+ errcode = target_read_memory (addr, string, print_max + 1);
if (errcode != 0)
{
- /* Try reading just one character. If that succeeds,
- assume we hit the end of the address space, but
- the initial part of the string is probably safe. */
+ /* Try reading just one character. If that succeeds, assume we hit
+ the end of the address space, but the initial part of the string
+ is probably safe. */
char x[1];
errcode = target_read_memory (addr, x, 1);
}
- if (errcode != 0)
- force_ellipses = 0;
- else
- for (i = 0; i < print_max; i++)
- if (string[i] == '\0')
+ if (len == 0)
+ {
+ /* When the length is unspecified, such as when printing C style
+ null byte terminated strings, then scan the string looking for
+ the terminator in the first print_max characters. If a terminator
+ is found, then it determines the length, otherwise print_max
+ determines the length. */
+ for (;len < print_max; len++)
{
- force_ellipses = 0;
- break;
+ if (string[len] == '\0')
+ {
+ break;
+ }
+ }
+ /* If the first unprinted character is not the null terminator, set
+ the flag to force ellipses. This is true whether or not we broke
+ out of the above loop because we found a terminator, or whether
+ we simply hit the limit on how many characters to print. */
+ if (string[len] != '\0')
+ {
+ force_ellipsis = 1;
}
+ }
+ else if (len > print_max)
+ {
+ /* Printing less than the number of characters actually requested
+ always makes us print ellipsis. */
+ len = print_max;
+ force_ellipsis = 1;
+ }
QUIT;
if (addressprint)
{
fputs_filtered (" ", stream);
}
- LA_PRINT_STRING (stream, string, i, force_ellipses);
+ LA_PRINT_STRING (stream, string, len, force_ellipsis);
}
if (errcode != 0)
{
fprintf_filtered (stream,
(" <Address 0x%x out of bounds>" + first_addr_err),
- addr + i);
+ addr + len);
}
else
{
- error ("Error reading memory address 0x%x: %s.", addr + i,
+ error ("Error reading memory address 0x%x: %s.", addr + len,
safe_strerror (errcode));
}
}
fflush (stream);
- return (i);
+ return (len);
}
\f
#if 0
projects / external / binutils.git / commitdiff