mtd: nand: sunxi: Fix ECC strength choice

commit f4c6cd1a7f2275d5bc0e494b21fff26f8dde80f0 upstream.

When the requested ECC strength does not exactly match the strengths
supported by the ECC engine, the driver is selecting the closest
strength meeting the 'selected_strength > requested_strength'
constraint. Fix the fact that, in this particular case, ecc->strength
value was not updated to match the 'selected_strength'.

For instance, one can encounter this issue when no ECC requirement is
filled in the device tree while the NAND chip minimum requirement is not
a strength/step_size combo natively supported by the ECC engine.

Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support")
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 82244be..9589748 100644 (file)
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1853,8 +1853,14 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
 
        /* Add ECC info retrieval from DT */
        for (i = 0; i < ARRAY_SIZE(strengths); i++) {
-               if (ecc->strength <= strengths[i])
+               if (ecc->strength <= strengths[i]) {
+                       /*
+                        * Update ecc->strength value with the actual strength
+                        * that will be used by the ECC engine.
+                        */
+                       ecc->strength = strengths[i];
                        break;
+               }
        }
 
        if (i >= ARRAY_SIZE(strengths)) {