ARM: at91: move at91_init_leds to board init

This will also allow to finally move the gpio driver to platform device/driver.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index ad7f9f0..cd81336 100644 (file)
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -47,9 +47,6 @@ static void __init csb337_init_early(void)
 {
        /* Initialize processor: 3.6864 MHz crystal */
        at91_initialize(3686400);
-
-       /* Setup the LEDs */
-       at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 }
 
 static struct macb_platform_data __initdata csb337_eth_data = {
@@ -222,6 +219,8 @@ static struct gpio_led csb_leds[] = {
 
 static void __init csb337_board_init(void)
 {
+       /* Setup the LEDs */
+       at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
        /* Serial */
        /* DBGU on ttyS0 */
        at91_register_uart(0, 0, 0);

diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 2510825..89cc372 100644 (file)
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -50,9 +50,6 @@ static void __init ecb_at91init_early(void)
 
        /* Initialize processor: 18.432 MHz crystal */
        at91_initialize(18432000);
-
-       /* Setup the LEDs */
-       at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
 }
 
 static struct macb_platform_data __initdata ecb_at91eth_data = {
@@ -142,6 +139,9 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
 
 static void __init ecb_at91board_init(void)
 {
+       /* Setup the LEDs */
+       at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
+
        /* Serial */
        /* DBGU on ttyS0. (Rx & Tx only) */
        at91_register_uart(0, 0, 0);

diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index bebeae8..558546c 100644 (file)
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -37,9 +37,6 @@ static void __init eco920_init_early(void)
        at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
 
        at91_initialize(18432000);
-
-       /* Setup the LEDs */
-       at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 }
 
 static struct macb_platform_data __initdata eco920_eth_data = {
@@ -97,6 +94,8 @@ static struct spi_board_info eco920_spi_devices[] = {
 
 static void __init eco920_board_init(void)
 {
+       /* Setup the LEDs */
+       at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
        /* DBGU on ttyS0. (Rx & Tx only */
        at91_register_uart(0, 0, 0);
        at91_add_device_serial();

diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index f46b3eb..f260657 100644 (file)
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -47,9 +47,6 @@ static void __init kafa_init_early(void)
 
        /* Initialize processor: 18.432 MHz crystal */
        at91_initialize(18432000);
-
-       /* Set up the LEDs */
-       at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
 }
 
 static struct macb_platform_data __initdata kafa_eth_data = {
@@ -70,6 +67,9 @@ static struct at91_udc_data __initdata kafa_udc_data = {
 
 static void __init kafa_board_init(void)
 {
+       /* Set up the LEDs */
+       at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
+
        /* Serial */
        /* DBGU on ttyS0. (Rx & Tx only) */
        at91_register_uart(0, 0, 0);

diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index e71b9e1..ba39db5 100644 (file)
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -50,9 +50,6 @@ static void __init kb9202_init_early(void)
 
        /* Initialize processor: 10 MHz crystal */
        at91_initialize(10000000);
-
-       /* Set up the LEDs */
-       at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
 }
 
 static struct macb_platform_data __initdata kb9202_eth_data = {
@@ -100,6 +97,9 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
 
 static void __init kb9202_board_init(void)
 {
+       /* Set up the LEDs */
+       at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
        /* Serial */
        /* DBGU on ttyS0. (Rx & Tx only) */
        at91_register_uart(0, 0, 0);

diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 4a0b097..afd7a47 100644 (file)
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -50,9 +50,6 @@ static void __init dk_init_early(void)
 {
        /* Initialize processor: 18.432 MHz crystal */
        at91_initialize(18432000);
-
-       /* Setup the LEDs */
-       at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 }
 
 static struct macb_platform_data __initdata dk_eth_data = {
@@ -179,6 +176,9 @@ static struct gpio_led dk_leds[] = {
 
 static void __init dk_board_init(void)
 {
+       /* Setup the LEDs */
+       at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
        /* Serial */
        /* DBGU on ttyS0. (Rx & Tx only) */
        at91_register_uart(0, 0, 0);

diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index b687261..78ffc83 100644 (file)
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -50,9 +50,6 @@ static void __init ek_init_early(void)
 {
        /* Initialize processor: 18.432 MHz crystal */
        at91_initialize(18432000);
-
-       /* Setup the LEDs */
-       at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
 }
 
 static struct macb_platform_data __initdata ek_eth_data = {
@@ -150,6 +147,9 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+       /* Setup the LEDs */
+       at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
        /* Serial */
        /* DBGU on ttyS0. (Rx & Tx only) */
        at91_register_uart(0, 0, 0);

diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index 10d8730..24ab9be 100644 (file)
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -35,9 +35,6 @@ static void __init rsi_ews_init_early(void)
 {
        /* Initialize processor: 18.432 MHz crystal */
        at91_initialize(18432000);
-
-       /* Setup the LEDs */
-       at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
 }
 
 /*
@@ -187,6 +184,9 @@ static struct platform_device rsiews_nor_flash = {
  */
 static void __init rsi_ews_board_init(void)
 {
+       /* Setup the LEDs */
+       at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
        /* Serial */
        /* DBGU on ttyS0. (Rx & Tx only) */
        /* This one is for debugging */

diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 5343dab..cdd21f2 100644 (file)
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -48,9 +48,6 @@ static void __init ek_init_early(void)
 {
        /* Initialize processor: 18.432 MHz crystal */
        at91_initialize(18432000);
-
-       /* Setup the LEDs */
-       at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
 }
 
 /*
@@ -170,6 +167,9 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
 
 static void __init ek_board_init(void)
 {
+       /* Setup the LEDs */
+       at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
+
        /* Serial */
        /* DBGU on ttyS0. (Rx & Tx only) */
        at91_register_uart(0, 0, 0);

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 4406f6b..065b5ee 100644 (file)
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -58,9 +58,6 @@ static void __init ek_init_early(void)
 {
        /* Initialize processor: 18.432 MHz crystal */
        at91_initialize(18432000);
-
-       /* Setup the LEDs */
-       at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
 }
 
 /*
@@ -570,6 +567,9 @@ static struct gpio_led ek_leds[] = {
 
 static void __init ek_board_init(void)
 {
+       /* Setup the LEDs */
+       at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
        /* Serial */
        /* DBGU on ttyS0. (Rx & Tx only) */
        at91_register_uart(0, 0, 0);

diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index db8d25c..d56665e 100644 (file)
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -58,9 +58,6 @@ static void __init yl9200_init_early(void)
 
        /* Initialize processor: 18.432 MHz crystal */
        at91_initialize(18432000);
-
-       /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
-       at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
 }
 
 /*
@@ -543,6 +540,9 @@ void __init yl9200_add_device_video(void) {}
 
 static void __init yl9200_board_init(void)
 {
+       /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+       at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
+
        /* Serial */
        /* DBGU on ttyS0. (Rx & Tx only) */
        at91_register_uart(0, 0, 0);