iio: imu: st_lsm6dsx: move irq related definitions in irq_config
authorLorenzo Bianconi <lorenzo@kernel.org>
Sun, 6 Oct 2019 13:21:57 +0000 (15:21 +0200)
committerJonathan Cameron <Jonathan.Cameron@huawei.com>
Tue, 15 Oct 2019 20:11:04 +0000 (21:11 +0100)
Group irq related definition in irq_config structure in
st_lsm6dsx_settings. This is a preliminary patch to move
OpenDrain/Active low registers in st_lsm6dsx_settings.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c

index e5e782f..2784e3d 100644 (file)
@@ -238,29 +238,21 @@ struct st_lsm6dsx_ext_dev_settings {
 /**
  * struct st_lsm6dsx_settings - ST IMU sensor settings
  * @wai: Sensor WhoAmI default value.
- * @int1_addr: Control Register address for INT1
- * @int2_addr: Control Register address for INT2
  * @reset_addr: register address for reset/reboot
  * @max_fifo_size: Sensor max fifo length in FIFO words.
  * @id: List of hw id/device name supported by the driver configuration.
  * @channels: IIO channels supported by the device.
+ * @irq_config: interrupts related registers.
  * @odr_table: Hw sensors odr table (Hz + val).
  * @fs_table: Hw sensors gain table (gain + val).
  * @decimator: List of decimator register info (addr + mask).
  * @batch: List of FIFO batching register info (addr + mask).
- * @lir: Latched interrupt register info (addr + mask).
- * @clear_on_read: Clear on read register info (addr + mask).
  * @fifo_ops: Sensor hw FIFO parameters.
  * @ts_settings: Hw timer related settings.
  * @shub_settings: i2c controller related settings.
  */
 struct st_lsm6dsx_settings {
        u8 wai;
-       u8 int1_addr;
-       u8 int2_addr;
-       u8 int1_func_addr;
-       u8 int2_func_addr;
-       u8 int_func_mask;
        u8 reset_addr;
        u16 max_fifo_size;
        struct {
@@ -271,12 +263,18 @@ struct st_lsm6dsx_settings {
                const struct iio_chan_spec *chan;
                int len;
        } channels[2];
+       struct {
+               struct st_lsm6dsx_reg irq1;
+               struct st_lsm6dsx_reg irq2;
+               struct st_lsm6dsx_reg irq1_func;
+               struct st_lsm6dsx_reg irq2_func;
+               struct st_lsm6dsx_reg lir;
+               struct st_lsm6dsx_reg clear_on_read;
+       } irq_config;
        struct st_lsm6dsx_odr_table_entry odr_table[2];
        struct st_lsm6dsx_fs_table_entry fs_table[2];
        struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
        struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
-       struct st_lsm6dsx_reg lir;
-       struct st_lsm6dsx_reg clear_on_read;
        struct st_lsm6dsx_fifo_ops fifo_ops;
        struct st_lsm6dsx_hw_ts_settings ts_settings;
        struct st_lsm6dsx_shub_settings shub_settings;
@@ -361,9 +359,9 @@ struct st_lsm6dsx_hw {
        u8 ts_sip;
        u8 sip;
 
+       const struct st_lsm6dsx_reg *irq_routing;
        u8 event_threshold;
        u8 enable_event;
-       struct st_lsm6dsx_reg irq_routing;
 
        u8 *buff;
 
index 5928d29..4028959 100644 (file)
@@ -61,7 +61,6 @@
 
 #include "st_lsm6dsx.h"
 
-#define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK       BIT(3)
 #define ST_LSM6DSX_REG_WHOAMI_ADDR             0x0f
 #define ST_LSM6DSX_REG_RESET_MASK              BIT(0)
 #define ST_LSM6DSX_REG_BOOT_MASK               BIT(7)
@@ -97,8 +96,6 @@ static const struct iio_chan_spec st_lsm6ds0_gyro_channels[] = {
 static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
        {
                .wai = 0x68,
-               .int1_addr = 0x0c,
-               .int2_addr = 0x0d,
                .reset_addr = 0x22,
                .max_fifo_size = 32,
                .id = {
@@ -166,14 +163,19 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .fs_len = 3,
                        },
                },
+               .irq_config = {
+                       .irq1 = {
+                               .addr = 0x0c,
+                               .mask = BIT(3),
+                       },
+                       .irq2 = {
+                               .addr = 0x0d,
+                               .mask = BIT(3),
+                       },
+               },
        },
        {
                .wai = 0x69,
-               .int1_addr = 0x0d,
-               .int2_addr = 0x0e,
-               .int1_func_addr = 0x5e,
-               .int2_func_addr = 0x5f,
-               .int_func_mask = BIT(5),
                .reset_addr = 0x12,
                .max_fifo_size = 1365,
                .id = {
@@ -242,6 +244,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .fs_len = 4,
                        },
                },
+               .irq_config = {
+                       .irq1 = {
+                               .addr = 0x0d,
+                               .mask = BIT(3),
+                       },
+                       .irq2 = {
+                               .addr = 0x0e,
+                               .mask = BIT(3),
+                       },
+                       .lir = {
+                               .addr = 0x58,
+                               .mask = BIT(0),
+                       },
+                       .irq1_func = {
+                               .addr = 0x5e,
+                               .mask = BIT(5),
+                       },
+                       .irq2_func = {
+                               .addr = 0x5f,
+                               .mask = BIT(5),
+                       },
+               },
                .decimator = {
                        [ST_LSM6DSX_ID_ACC] = {
                                .addr = 0x08,
@@ -252,10 +276,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .mask = GENMASK(5, 3),
                        },
                },
-               .lir = {
-                       .addr = 0x58,
-                       .mask = BIT(0),
-               },
                .fifo_ops = {
                        .update_fifo = st_lsm6dsx_update_fifo,
                        .read_fifo = st_lsm6dsx_read_fifo,
@@ -301,11 +321,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
        },
        {
                .wai = 0x69,
-               .int1_addr = 0x0d,
-               .int2_addr = 0x0e,
-               .int1_func_addr = 0x5e,
-               .int2_func_addr = 0x5f,
-               .int_func_mask = BIT(5),
                .reset_addr = 0x12,
                .max_fifo_size = 682,
                .id = {
@@ -374,6 +389,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .fs_len = 4,
                        },
                },
+               .irq_config = {
+                       .irq1 = {
+                               .addr = 0x0d,
+                               .mask = BIT(3),
+                       },
+                       .irq2 = {
+                               .addr = 0x0e,
+                               .mask = BIT(3),
+                       },
+                       .lir = {
+                               .addr = 0x58,
+                               .mask = BIT(0),
+                       },
+                       .irq1_func = {
+                               .addr = 0x5e,
+                               .mask = BIT(5),
+                       },
+                       .irq2_func = {
+                               .addr = 0x5f,
+                               .mask = BIT(5),
+                       },
+               },
                .decimator = {
                        [ST_LSM6DSX_ID_ACC] = {
                                .addr = 0x08,
@@ -384,10 +421,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .mask = GENMASK(5, 3),
                        },
                },
-               .lir = {
-                       .addr = 0x58,
-                       .mask = BIT(0),
-               },
                .fifo_ops = {
                        .update_fifo = st_lsm6dsx_update_fifo,
                        .read_fifo = st_lsm6dsx_read_fifo,
@@ -433,11 +466,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
        },
        {
                .wai = 0x6a,
-               .int1_addr = 0x0d,
-               .int2_addr = 0x0e,
-               .int1_func_addr = 0x5e,
-               .int2_func_addr = 0x5f,
-               .int_func_mask = BIT(5),
                .reset_addr = 0x12,
                .max_fifo_size = 682,
                .id = {
@@ -515,6 +543,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .fs_len = 4,
                        },
                },
+               .irq_config = {
+                       .irq1 = {
+                               .addr = 0x0d,
+                               .mask = BIT(3),
+                       },
+                       .irq2 = {
+                               .addr = 0x0e,
+                               .mask = BIT(3),
+                       },
+                       .lir = {
+                               .addr = 0x58,
+                               .mask = BIT(0),
+                       },
+                       .irq1_func = {
+                               .addr = 0x5e,
+                               .mask = BIT(5),
+                       },
+                       .irq2_func = {
+                               .addr = 0x5f,
+                               .mask = BIT(5),
+                       },
+               },
                .decimator = {
                        [ST_LSM6DSX_ID_ACC] = {
                                .addr = 0x08,
@@ -525,10 +575,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .mask = GENMASK(5, 3),
                        },
                },
-               .lir = {
-                       .addr = 0x58,
-                       .mask = BIT(0),
-               },
                .fifo_ops = {
                        .update_fifo = st_lsm6dsx_update_fifo,
                        .read_fifo = st_lsm6dsx_read_fifo,
@@ -578,8 +624,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
        },
        {
                .wai = 0x6c,
-               .int1_addr = 0x0d,
-               .int2_addr = 0x0e,
                .reset_addr = 0x12,
                .max_fifo_size = 512,
                .id = {
@@ -651,6 +695,24 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .fs_len = 4,
                        },
                },
+               .irq_config = {
+                       .irq1 = {
+                               .addr = 0x0d,
+                               .mask = BIT(3),
+                       },
+                       .irq2 = {
+                               .addr = 0x0e,
+                               .mask = BIT(3),
+                       },
+                       .lir = {
+                               .addr = 0x56,
+                               .mask = BIT(0),
+                       },
+                       .clear_on_read = {
+                               .addr = 0x56,
+                               .mask = BIT(6),
+                       },
+               },
                .batch = {
                        [ST_LSM6DSX_ID_ACC] = {
                                .addr = 0x09,
@@ -661,14 +723,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .mask = GENMASK(7, 4),
                        },
                },
-               .lir = {
-                       .addr = 0x56,
-                       .mask = BIT(0),
-               },
-               .clear_on_read = {
-                       .addr = 0x56,
-                       .mask = BIT(6),
-               },
                .fifo_ops = {
                        .update_fifo = st_lsm6dsx_update_fifo,
                        .read_fifo = st_lsm6dsx_read_tagged_fifo,
@@ -721,11 +775,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
        },
        {
                .wai = 0x6b,
-               .int1_addr = 0x0d,
-               .int2_addr = 0x0e,
-               .int1_func_addr = 0x5e,
-               .int2_func_addr = 0x5f,
-               .int_func_mask = BIT(5),
                .reset_addr = 0x12,
                .max_fifo_size = 512,
                .id = {
@@ -794,6 +843,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .fs_len = 4,
                        },
                },
+               .irq_config = {
+                       .irq1 = {
+                               .addr = 0x0d,
+                               .mask = BIT(3),
+                       },
+                       .irq2 = {
+                               .addr = 0x0e,
+                               .mask = BIT(3),
+                       },
+                       .lir = {
+                               .addr = 0x56,
+                               .mask = BIT(0),
+                       },
+                       .clear_on_read = {
+                               .addr = 0x56,
+                               .mask = BIT(6),
+                       },
+                       .irq1_func = {
+                               .addr = 0x5e,
+                               .mask = BIT(5),
+                       },
+                       .irq2_func = {
+                               .addr = 0x5f,
+                               .mask = BIT(5),
+                       },
+               },
                .batch = {
                        [ST_LSM6DSX_ID_ACC] = {
                                .addr = 0x09,
@@ -804,14 +879,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .mask = GENMASK(7, 4),
                        },
                },
-               .lir = {
-                       .addr = 0x56,
-                       .mask = BIT(0),
-               },
-               .clear_on_read = {
-                       .addr = 0x56,
-                       .mask = BIT(6),
-               },
                .fifo_ops = {
                        .update_fifo = st_lsm6dsx_update_fifo,
                        .read_fifo = st_lsm6dsx_read_tagged_fifo,
@@ -853,11 +920,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
        },
        {
                .wai = 0x6b,
-               .int1_addr = 0x0d,
-               .int2_addr = 0x0e,
-               .int1_func_addr = 0x5e,
-               .int2_func_addr = 0x5f,
-               .int_func_mask = BIT(5),
                .reset_addr = 0x12,
                .max_fifo_size = 512,
                .id = {
@@ -929,6 +991,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .fs_len = 4,
                        },
                },
+               .irq_config = {
+                       .irq1 = {
+                               .addr = 0x0d,
+                               .mask = BIT(3),
+                       },
+                       .irq2 = {
+                               .addr = 0x0e,
+                               .mask = BIT(3),
+                       },
+                       .lir = {
+                               .addr = 0x56,
+                               .mask = BIT(0),
+                       },
+                       .clear_on_read = {
+                               .addr = 0x56,
+                               .mask = BIT(6),
+                       },
+                       .irq1_func = {
+                               .addr = 0x5e,
+                               .mask = BIT(5),
+                       },
+                       .irq2_func = {
+                               .addr = 0x5f,
+                               .mask = BIT(5),
+                       },
+               },
                .batch = {
                        [ST_LSM6DSX_ID_ACC] = {
                                .addr = 0x09,
@@ -939,14 +1027,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
                                .mask = GENMASK(7, 4),
                        },
                },
-               .lir = {
-                       .addr = 0x56,
-                       .mask = BIT(0),
-               },
-               .clear_on_read = {
-                       .addr = 0x56,
-                       .mask = BIT(6),
-               },
                .fifo_ops = {
                        .update_fifo = st_lsm6dsx_update_fifo,
                        .read_fifo = st_lsm6dsx_read_tagged_fifo,
@@ -1296,7 +1376,7 @@ static int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, int state)
        int err;
        u8 enable = 0;
 
-       if (!hw->settings->int1_func_addr)
+       if (!hw->settings->irq_config.irq1_func.addr)
                return -ENOTSUPP;
 
        enable = state ? hw->settings->event_settings.enable_reg.mask : 0;
@@ -1308,12 +1388,11 @@ static int st_lsm6dsx_event_setup(struct st_lsm6dsx_hw *hw, int state)
        if (err < 0)
                return err;
 
-       enable = state ? hw->irq_routing.mask : 0;
+       enable = state ? hw->irq_routing->mask : 0;
 
        /* Enable wakeup interrupt */
-       return regmap_update_bits(hw->regmap, hw->irq_routing.addr,
-                                 hw->irq_routing.mask,
-                                 enable);
+       return regmap_update_bits(hw->regmap, hw->irq_routing->addr,
+                                 hw->irq_routing->mask, enable);
 }
 
 static int st_lsm6dsx_read_event(struct iio_dev *iio_dev,
@@ -1537,7 +1616,9 @@ static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
        return of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
 }
 
-static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
+static int
+st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
+                       const struct st_lsm6dsx_reg **drdy_reg)
 {
        int err = 0, drdy_pin;
 
@@ -1551,14 +1632,12 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
 
        switch (drdy_pin) {
        case 1:
-               *drdy_reg = hw->settings->int1_addr;
-               hw->irq_routing.addr = hw->settings->int1_func_addr;
-               hw->irq_routing.mask = hw->settings->int_func_mask;
+               hw->irq_routing = &hw->settings->irq_config.irq1_func;
+               *drdy_reg = &hw->settings->irq_config.irq1;
                break;
        case 2:
-               *drdy_reg = hw->settings->int2_addr;
-               hw->irq_routing.addr = hw->settings->int2_func_addr;
-               hw->irq_routing.mask = hw->settings->int_func_mask;
+               hw->irq_routing = &hw->settings->irq_config.irq2_func;
+               *drdy_reg = &hw->settings->irq_config.irq2;
                break;
        default:
                dev_err(hw->dev, "unsupported data ready pin\n");
@@ -1654,7 +1733,7 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
 
 static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
 {
-       u8 drdy_int_reg;
+       const struct st_lsm6dsx_reg *reg;
        int err;
 
        /* device sw reset */
@@ -1683,35 +1762,29 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
                return err;
 
        /* enable FIFO watermak interrupt */
-       err = st_lsm6dsx_get_drdy_reg(hw, &drdy_int_reg);
+       err = st_lsm6dsx_get_drdy_reg(hw, &reg);
        if (err < 0)
                return err;
 
-       err = regmap_update_bits(hw->regmap, drdy_int_reg,
-                                ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK,
-                                FIELD_PREP(ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK,
-                                           1));
+       err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+                                ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
        if (err < 0)
                return err;
 
        /* enable Latched interrupts for device events */
-       if (hw->settings->lir.addr) {
-               unsigned int data;
-
-               data = ST_LSM6DSX_SHIFT_VAL(1, hw->settings->lir.mask);
-               err = regmap_update_bits(hw->regmap, hw->settings->lir.addr,
-                                        hw->settings->lir.mask, data);
+       if (hw->settings->irq_config.lir.addr) {
+               reg = &hw->settings->irq_config.lir;
+               err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
+                                        ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
                if (err < 0)
                        return err;
 
                /* enable clear on read for latched interrupts */
-               if (hw->settings->clear_on_read.addr) {
-                       data = ST_LSM6DSX_SHIFT_VAL(1,
-                                       hw->settings->clear_on_read.mask);
+               if (hw->settings->irq_config.clear_on_read.addr) {
+                       reg = &hw->settings->irq_config.clear_on_read;
                        err = regmap_update_bits(hw->regmap,
-                                       hw->settings->clear_on_read.addr,
-                                       hw->settings->clear_on_read.mask,
-                                       data);
+                                       reg->addr, reg->mask,
+                                       ST_LSM6DSX_SHIFT_VAL(1, reg->mask));
                        if (err < 0)
                                return err;
                }