include: configs: j721s2_evm: Change to using .env

Move to using .env file for setting up environment variables for J721S2.

Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/board/ti/j721s2/Kconfig b/board/ti/j721s2/Kconfig
index 067c56a..a24641f 100644 (file)
--- a/board/ti/j721s2/Kconfig
+++ b/board/ti/j721s2/Kconfig
@@ -38,6 +38,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
        default "j721s2_evm"
 
+config ENV_SOURCE_FILE
+       default "j721s2"
+
 source "board/ti/common/Kconfig"
 
 endif
@@ -53,6 +56,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
        default "j721s2_evm"
 
+config ENV_SOURCE_FILE
+       default "j721s2"
+
 source "board/ti/common/Kconfig"
 
 endif

diff --git a/board/ti/j721s2/j721s2.env b/board/ti/j721s2/j721s2.env
new file mode 100644 (file)
index 0000000..2152f88
--- /dev/null
+++ b/board/ti/j721s2/j721s2.env
@@ -0,0 +1,56 @@
+#include <environment/ti/ti_armv7_common.env>
+#include <environment/ti/mmc.env>
+#include <environment/ti/ufs.env>
+#include <environment/ti/k3_dfu.env>
+
+#if CONFIG_CMD_REMOTEPROC
+#include <environment/ti/k3_rproc.env>
+#endif
+
+default_device_tree=k3-j721s2-common-proc-board.dtb
+findfdt=
+       setenv name_fdt ${default_device_tree};
+       if test $board_name = j721s2; then                      \
+               setenv name_fdt k3-j721s2-common-proc-board.dtb; fi;
+       if test $board_name = am68-sk; then
+               setenv name_fdt k3-am68-sk-base-board.dtb; fi;
+       setenv fdtfile ${name_fdt}
+name_kern=Image
+console=ttyS2,115200n8
+args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000
+       ${mtdparts}
+run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+
+boot=mmc
+mmcdev=1
+bootpart=1:2
+bootdir=/boot
+#if CONFIG_SYS_K3_SPL_ATF
+#if CONFIG_TARGET_J721S2_R5_EVM
+addr_mcur5f0_0load=0x89000000
+name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw
+#endif
+#endif
+rd_spec=-
+init_mmc=run args_all args_mmc
+get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}
+get_overlay_mmc=
+       fdt address ${fdtaddr};
+       fdt resize 0x100000;
+       for overlay in $name_overlays;
+       do;
+       load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} &&
+       fdt apply ${dtboaddr};
+       done;
+partitions=uuid_disk=${uuid_gpt_disk};
+       name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
+get_kern_mmc=load mmc ${bootpart} ${loadaddr}
+       ${bootdir}/${name_kern}
+get_fit_mmc=load mmc ${bootpart} ${addr_fit}
+       ${bootdir}/${name_fit}
+partitions=uuid_disk=${uuid_gpt_disk};
+       name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
+
+rproc_fw_binaries= 2 /lib/firmware/j721s2-main-r5f0_0-fw 3 /lib/firmware/j721s2-main-r5f0_1-fw 4 /lib/firmware/j721s2-main-r5f1_0-fw 5 /lib/firmware/j721s2-main-r5f1_1-fw 6 /lib/firmware/j721s2-c71_0-fw 7 /lib/firmware/j721s2-c71_1-fw
+
+

diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h
index bfada9e..2fa93b7 100644 (file)
--- a/include/configs/j721s2_evm.h
+++ b/include/configs/j721s2_evm.h
@@ -11,10 +11,6 @@
 
 #include <linux/sizes.h>
 #include <config_distro_bootcmd.h>
-#include <environment/ti/mmc.h>
-#include <environment/ti/k3_rproc.h>
-#include <environment/ti/ufs.h>
-#include <environment/ti/k3_dfu.h>
 
 /* DDR Configuration */
 #define CFG_SYS_SDRAM_BASE1            0x880000000
@@ -27,120 +23,8 @@
 #define CFG_SYS_UBOOT_BASE             0x50080000
 #endif
 
-/* U-Boot general configuration */
-#define EXTRA_ENV_J721S2_BOARD_SETTINGS                                        \
-       "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"      \
-       "findfdt="                                                      \
-               "setenv name_fdt ${default_device_tree};"               \
-               "if test $board_name = j721s2; then "                   \
-                       "setenv name_fdt k3-j721s2-common-proc-board.dtb; fi;" \
-               "if test $board_name = am68-sk; then "                  \
-                       "setenv name_fdt k3-am68-sk-base-board.dtb; fi;"\
-               "setenv fdtfile ${name_fdt}\0"                          \
-       "name_kern=Image\0"                                             \
-       "console=ttyS2,115200n8\0"                                      \
-       "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000 "  \
-               "${mtdparts}\0"                                         \
-       "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
-
-#define PARTS_DEFAULT \
-       /* Linux partitions */ \
-       "uuid_disk=${uuid_gpt_disk};" \
-       "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#if defined(CONFIG_TARGET_J721S2_R5_EVM)
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                             \
-       "addr_mcur5f0_0load=0x89000000\0"                               \
-       "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
-#elif defined(CONFIG_TARGET_J7200_R5_EVM)
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                             \
-       "addr_mcur5f0_0load=0x89000000\0"                               \
-       "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
-#endif /* CONFIG_TARGET_J721S2_R5_EVM */
-#else
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
-#endif /* CONFIG_SYS_K3_SPL_ATF */
-
-/* U-Boot MMC-specific configuration */
-#define EXTRA_ENV_J721S2_BOARD_SETTINGS_MMC                            \
-       "boot=mmc\0"                                                    \
-       "mmcdev=1\0"                                                    \
-       "bootpart=1:2\0"                                                \
-       "bootdir=/boot\0"                                               \
-       EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                              \
-       "rd_spec=-\0"                                                   \
-       "init_mmc=run args_all args_mmc\0"                              \
-       "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
-       "get_overlay_mmc="                                              \
-               "fdt address ${fdtaddr};"                               \
-               "fdt resize 0x100000;"                                  \
-               "for overlay in $name_overlays;"                        \
-               "do;"                                                   \
-               "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "    \
-               "fdt apply ${dtboaddr};"                                \
-               "done;\0"                                               \
-       "partitions=" PARTS_DEFAULT                                     \
-       "get_kern_mmc=load mmc ${bootpart} ${loadaddr} "                \
-               "${bootdir}/${name_kern}\0"                             \
-       "get_fit_mmc=load mmc ${bootpart} ${addr_fit} "                 \
-               "${bootdir}/${name_fit}\0"                              \
-       "partitions=" PARTS_DEFAULT
-
-/* Set the default list of remote processors to boot */
-#if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
-#ifdef DEFAULT_RPROCS
-#undef DEFAULT_RPROCS
-#endif
-#endif
-
-#ifdef CONFIG_TARGET_J721S2_A72_EVM
-#define DEFAULT_RPROCS ""                                              \
-               "2 /lib/firmware/j721s2-main-r5f0_0-fw "                        \
-               "3 /lib/firmware/j721s2-main-r5f0_1-fw "                        \
-               "4 /lib/firmware/j721s2-main-r5f1_0-fw "                        \
-               "5 /lib/firmware/j721s2-main-r5f1_1-fw "                        \
-               "6 /lib/firmware/j721s2-c71_0-fw "                              \
-               "7 /lib/firmware/j721s2-c71_1-fw "
-#endif /* CONFIG_TARGET_J721S2_A72_EVM */
-
-#ifdef CONFIG_TARGET_J7200_A72_EVM
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY                         \
-       "do_main_cpsw0_qsgmii_phyinit=1\0"                              \
-       "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;"               \
-                "gpio clear gpio@22_16\0"                              \
-       "main_cpsw0_qsgmii_phyinit="                                    \
-       "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
-                       "test ${boot} = mmc; then "                     \
-               "run init_main_cpsw0_qsgmii_phy;"                       \
-       "fi;\0"
-#define DEFAULT_RPROCS ""                                              \
-               "2 /lib/firmware/j7200-main-r5f0_0-fw "                 \
-               "3 /lib/firmware/j7200-main-r5f0_1-fw "
-#endif /* CONFIG_TARGET_J7200_A72_EVM */
-
-#ifndef EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
-#endif
-
-/* set default dfu_bufsiz to 128KB (sector size of OSPI) */
-#define EXTRA_ENV_DFUARGS \
-       DFU_ALT_INFO_MMC \
-       DFU_ALT_INFO_EMMC \
-       DFU_ALT_INFO_RAM \
-       DFU_ALT_INFO_OSPI
-
 /* Incorporate settings into the U-Boot environment */
-#define CFG_EXTRA_ENV_SETTINGS                                 \
-       DEFAULT_LINUX_BOOT_ENV                                          \
-       DEFAULT_MMC_TI_ARGS                                             \
-       DEFAULT_FIT_TI_ARGS                                             \
-       EXTRA_ENV_J721S2_BOARD_SETTINGS                                 \
-       EXTRA_ENV_J721S2_BOARD_SETTINGS_MMC                             \
-       EXTRA_ENV_RPROC_SETTINGS                                        \
-       EXTRA_ENV_DFUARGS                                               \
-       DEFAULT_UFS_TI_ARGS                                             \
-       EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
+#define CFG_EXTRA_ENV_SETTINGS
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>