#ifdef CONFIG_EXYNOS5420
/*
+ * Enable ECC by setting L2CTLR[21].
+ * Set L2CTLR[7] to make tag ram latency 3 cycles and
+ * set L2CTLR[1] to make data ram latency 3 cycles.
+ * We need to make RAM latency of 3 cycles here because cores
+ * power ON and OFF while switching. And everytime a core powers
+ * ON, iROM provides it a default L2CTLR value 0x400 which stands
+ * for TAG RAM setup of 1 cycle. Hence, we face a need of
+ * restoring data and tag latency values.
+ */
+static void configure_l2_ctlr(void)
+{
+ uint32_t val;
+
+ mrc_l2_ctlr(val);
+ val |= (1 << 21);
+ val |= (1 << 7);
+ val |= (1 << 1);
+ mcr_l2_ctlr(val);
+}
+
+/*
+ * Set L2ACTLR[27] to prevent the clock generator from stopping
+ * the L2 logic clock.
+ * Set L2ACTLR[3] to disable clean/evict push to external.
+ */
+static void configure_l2_actlr(void)
+{
+ uint32_t val;
+
+ mrc_l2_aux_ctlr(val);
+ val |= (1 << 27);
+ val |= (1 << 3);
+ mcr_l2_aux_ctlr(val);
+}
+
+/*
* Power up secondary CPUs.
*/
static void secondary_cpu_start(void)
/* Set the CPU to SVC32 mode */
svc32_mode_en();
- v7_enable_l2_hazard_detect();
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+ /* Read MIDR for Primary Part Number */
+ mrc_midr(val);
+ val = (val >> 4);
+ val &= 0xf;
+
+ if (val == 0xf) {
+ configure_l2_ctlr();
+ configure_l2_actlr();
+ v7_enable_l2_hazard_detect();
+ }
+#endif
/* Invalidate L1 & TLB */
val = 0x0;
static void secondary_cores_configure(void)
{
/* Setup L2 cache */
+ configure_l2_ctlr();
v7_enable_l2_hazard_detect();
/* Clear secondary boot iRAM base */
*/
static void exynos5_set_l2cache_params(void)
{
- unsigned int val = 0;
+ unsigned int l2ctlr = 0, l2actlr = 0;
/* Read L2CTLR value */
- asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r"(val));
+ asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r"(l2ctlr));
- /* Set cache setup and latency cycles */
- val |= CACHE_TAG_RAM_SETUP |
- CACHE_DATA_RAM_SETUP |
- CACHE_TAG_RAM_LATENCY |
+ /* Set cache latency cycles */
+ l2ctlr |= CACHE_TAG_RAM_LATENCY |
CACHE_DATA_RAM_LATENCY;
- /* Write new vlaue to L2CTLR */
- asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val));
-
if (proid_is_exynos5420() || proid_is_exynos5800()) {
/* Read L2ACTLR value */
- asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r" (val));
+ asm volatile("mrc p15, 1, %0, c15, c0, 0" : "=r" (l2actlr));
/* Disable clean/evict push to external */
- val |= CACHE_DISABLE_CLEAN_EVICT;
+ l2actlr |= CACHE_DISABLE_CLEAN_EVICT;
/* Write new vlaue to L2ACTLR */
- asm volatile("mcr p15, 1, %0, c15, c0, 0" : : "r" (val));
+ asm volatile("mcr p15, 1, %0, c15, c0, 0" : : "r" (l2actlr));
+ } else {
+ /* Set cache setup cycles */
+ l2ctlr |= CACHE_TAG_RAM_SETUP |
+ CACHE_DATA_RAM_SETUP;
}
+
+ /* Write new vlaue to L2CTLR */
+ asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(l2ctlr));
}
/*