Enable uart2 to support '/dev/ttyAMA1'. The node setting is from
arch/arm/boot/dts/overlays/uart2-overlay.dts, without cts, rts.
Tx pin is gpio 0, pin 27, and Rx pin is gpio 1, pin 28.
Ref: https://www.raspberrypi.org/forums/viewtopic.php?t=244827
Change-Id: Ib6c460f6c8e46f3ef7d2d40ab23b3524e438c6c9
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
pinctrl-0 = <&uart1_pins>;
};
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins &spi0_cs_pins>;