vxge: Fix checkstack warning in vxge_probe()
authorPrarit Bhargava <prarit@redhat.com>
Wed, 2 Jun 2010 12:51:19 +0000 (05:51 -0700)
committerDavid S. Miller <davem@davemloft.net>
Wed, 2 Jun 2010 12:51:19 +0000 (05:51 -0700)
Linux 2.6.33 reports this checkstack warning:

drivers/net/vxge/vxge-main.c: In function 'vxge_probe':
drivers/net/vxge/vxge-main.c:4409: warning: the frame size of 1028 bytes is larger than 1024 bytes

This warning does not occur in the latest linux-2.6 or linux-next, however,
when I do a 'make -j32 CONFIG_FRAME_WARN=512' instead of 1024 I see

drivers/net/vxge/vxge-main.c: In function ‘vxge_probe’:
drivers/net/vxge/vxge-main.c:4423: warning: the frame size of 1024 bytes is larger than 512 bytes

This patch moves the large vxge_config struct off the stack.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/vxge/vxge-main.c

index b504bd5..45c5dc2 100644 (file)
@@ -4012,7 +4012,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
        int high_dma = 0;
        u64 vpath_mask = 0;
        struct vxgedev *vdev;
-       struct vxge_config ll_config;
+       struct vxge_config *ll_config = NULL;
        struct vxge_hw_device_config *device_config = NULL;
        struct vxge_hw_device_attr attr;
        int i, j, no_of_vpath = 0, max_vpath_supported = 0;
@@ -4071,17 +4071,24 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                goto _exit0;
        }
 
-       memset(&ll_config, 0, sizeof(struct vxge_config));
-       ll_config.tx_steering_type = TX_MULTIQ_STEERING;
-       ll_config.intr_type = MSI_X;
-       ll_config.napi_weight = NEW_NAPI_WEIGHT;
-       ll_config.rth_steering = RTH_STEERING;
+       ll_config = kzalloc(sizeof(*ll_config), GFP_KERNEL);
+       if (!ll_config) {
+               ret = -ENOMEM;
+               vxge_debug_init(VXGE_ERR,
+                       "ll_config : malloc failed %s %d",
+                       __FILE__, __LINE__);
+               goto _exit0;
+       }
+       ll_config->tx_steering_type = TX_MULTIQ_STEERING;
+       ll_config->intr_type = MSI_X;
+       ll_config->napi_weight = NEW_NAPI_WEIGHT;
+       ll_config->rth_steering = RTH_STEERING;
 
        /* get the default configuration parameters */
        vxge_hw_device_config_default_get(device_config);
 
        /* initialize configuration parameters */
-       vxge_device_config_init(device_config, &ll_config.intr_type);
+       vxge_device_config_init(device_config, &ll_config->intr_type);
 
        ret = pci_enable_device(pdev);
        if (ret) {
@@ -4134,7 +4141,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                (unsigned long long)pci_resource_start(pdev, 0));
 
        status = vxge_hw_device_hw_info_get(attr.bar0,
-                       &ll_config.device_hw_info);
+                       &ll_config->device_hw_info);
        if (status != VXGE_HW_OK) {
                vxge_debug_init(VXGE_ERR,
                        "%s: Reading of hardware info failed."
@@ -4143,7 +4150,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                goto _exit3;
        }
 
-       if (ll_config.device_hw_info.fw_version.major !=
+       if (ll_config->device_hw_info.fw_version.major !=
                VXGE_DRIVER_FW_VERSION_MAJOR) {
                vxge_debug_init(VXGE_ERR,
                        "%s: Incorrect firmware version."
@@ -4153,7 +4160,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                goto _exit3;
        }
 
-       vpath_mask = ll_config.device_hw_info.vpath_mask;
+       vpath_mask = ll_config->device_hw_info.vpath_mask;
        if (vpath_mask == 0) {
                vxge_debug_ll_config(VXGE_TRACE,
                        "%s: No vpaths available in device", VXGE_DRIVER_NAME);
@@ -4165,10 +4172,10 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                "%s:%d  Vpath mask = %llx", __func__, __LINE__,
                (unsigned long long)vpath_mask);
 
-       function_mode = ll_config.device_hw_info.function_mode;
-       host_type = ll_config.device_hw_info.host_type;
+       function_mode = ll_config->device_hw_info.function_mode;
+       host_type = ll_config->device_hw_info.host_type;
        is_privileged = __vxge_hw_device_is_privilaged(host_type,
-               ll_config.device_hw_info.func_id);
+               ll_config->device_hw_info.func_id);
 
        /* Check how many vpaths are available */
        for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
@@ -4182,7 +4189,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 
        /* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
        if (is_sriov(function_mode) && (max_config_dev > 1) &&
-               (ll_config.intr_type != INTA) &&
+               (ll_config->intr_type != INTA) &&
                (is_privileged == VXGE_HW_OK)) {
                ret = pci_enable_sriov(pdev, ((max_config_dev - 1) < num_vfs)
                        ? (max_config_dev - 1) : num_vfs);
@@ -4195,7 +4202,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
         * Configure vpaths and get driver configured number of vpaths
         * which is less than or equal to the maximum vpaths per function.
         */
-       no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, &ll_config);
+       no_of_vpath = vxge_config_vpaths(device_config, vpath_mask, ll_config);
        if (!no_of_vpath) {
                vxge_debug_ll_config(VXGE_ERR,
                        "%s: No more vpaths to configure", VXGE_DRIVER_NAME);
@@ -4230,21 +4237,21 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
        /* set private device info */
        pci_set_drvdata(pdev, hldev);
 
-       ll_config.gro_enable = VXGE_GRO_ALWAYS_AGGREGATE;
-       ll_config.fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS;
-       ll_config.addr_learn_en = addr_learn_en;
-       ll_config.rth_algorithm = RTH_ALG_JENKINS;
-       ll_config.rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4;
-       ll_config.rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE;
-       ll_config.rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
-       ll_config.rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
-       ll_config.rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
-       ll_config.rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
-       ll_config.rth_bkt_sz = RTH_BUCKET_SIZE;
-       ll_config.tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
-       ll_config.rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
-
-       if (vxge_device_register(hldev, &ll_config, high_dma, no_of_vpath,
+       ll_config->gro_enable = VXGE_GRO_ALWAYS_AGGREGATE;
+       ll_config->fifo_indicate_max_pkts = VXGE_FIFO_INDICATE_MAX_PKTS;
+       ll_config->addr_learn_en = addr_learn_en;
+       ll_config->rth_algorithm = RTH_ALG_JENKINS;
+       ll_config->rth_hash_type_tcpipv4 = VXGE_HW_RING_HASH_TYPE_TCP_IPV4;
+       ll_config->rth_hash_type_ipv4 = VXGE_HW_RING_HASH_TYPE_NONE;
+       ll_config->rth_hash_type_tcpipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
+       ll_config->rth_hash_type_ipv6 = VXGE_HW_RING_HASH_TYPE_NONE;
+       ll_config->rth_hash_type_tcpipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
+       ll_config->rth_hash_type_ipv6ex = VXGE_HW_RING_HASH_TYPE_NONE;
+       ll_config->rth_bkt_sz = RTH_BUCKET_SIZE;
+       ll_config->tx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
+       ll_config->rx_pause_enable = VXGE_PAUSE_CTRL_ENABLE;
+
+       if (vxge_device_register(hldev, ll_config, high_dma, no_of_vpath,
                &vdev)) {
                ret = -EINVAL;
                goto _exit4;
@@ -4275,7 +4282,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
                vdev->vpaths[j].vdev = vdev;
                vdev->vpaths[j].max_mac_addr_cnt = max_mac_vpath;
                memcpy((u8 *)vdev->vpaths[j].macaddr,
-                               (u8 *)ll_config.device_hw_info.mac_addrs[i],
+                               ll_config->device_hw_info.mac_addrs[i],
                                ETH_ALEN);
 
                /* Initialize the mac address list header */
@@ -4296,18 +4303,18 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 
        macaddr = (u8 *)vdev->vpaths[0].macaddr;
 
-       ll_config.device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0';
-       ll_config.device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0';
-       ll_config.device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0';
+       ll_config->device_hw_info.serial_number[VXGE_HW_INFO_LEN - 1] = '\0';
+       ll_config->device_hw_info.product_desc[VXGE_HW_INFO_LEN - 1] = '\0';
+       ll_config->device_hw_info.part_number[VXGE_HW_INFO_LEN - 1] = '\0';
 
        vxge_debug_init(VXGE_TRACE, "%s: SERIAL NUMBER: %s",
-               vdev->ndev->name, ll_config.device_hw_info.serial_number);
+               vdev->ndev->name, ll_config->device_hw_info.serial_number);
 
        vxge_debug_init(VXGE_TRACE, "%s: PART NUMBER: %s",
-               vdev->ndev->name, ll_config.device_hw_info.part_number);
+               vdev->ndev->name, ll_config->device_hw_info.part_number);
 
        vxge_debug_init(VXGE_TRACE, "%s: Neterion %s Server Adapter",
-               vdev->ndev->name, ll_config.device_hw_info.product_desc);
+               vdev->ndev->name, ll_config->device_hw_info.product_desc);
 
        vxge_debug_init(VXGE_TRACE, "%s: MAC ADDR: %pM",
                vdev->ndev->name, macaddr);
@@ -4317,11 +4324,11 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 
        vxge_debug_init(VXGE_TRACE,
                "%s: Firmware version : %s Date : %s", vdev->ndev->name,
-               ll_config.device_hw_info.fw_version.version,
-               ll_config.device_hw_info.fw_date.date);
+               ll_config->device_hw_info.fw_version.version,
+               ll_config->device_hw_info.fw_date.date);
 
        if (new_device) {
-               switch (ll_config.device_hw_info.function_mode) {
+               switch (ll_config->device_hw_info.function_mode) {
                case VXGE_HW_FUNCTION_MODE_SINGLE_FUNCTION:
                        vxge_debug_init(VXGE_TRACE,
                        "%s: Single Function Mode Enabled", vdev->ndev->name);
@@ -4344,7 +4351,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
        vxge_print_parm(vdev, vpath_mask);
 
        /* Store the fw version for ethttool option */
-       strcpy(vdev->fw_version, ll_config.device_hw_info.fw_version.version);
+       strcpy(vdev->fw_version, ll_config->device_hw_info.fw_version.version);
        memcpy(vdev->ndev->dev_addr, (u8 *)vdev->vpaths[0].macaddr, ETH_ALEN);
        memcpy(vdev->ndev->perm_addr, vdev->ndev->dev_addr, ETH_ALEN);
 
@@ -4383,7 +4390,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
         * present to prevent such a failure.
         */
 
-       if (ll_config.device_hw_info.function_mode ==
+       if (ll_config->device_hw_info.function_mode ==
                VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION)
                if (vdev->config.intr_type == INTA)
                        vxge_hw_device_unmask_all(hldev);
@@ -4395,6 +4402,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
        VXGE_COPY_DEBUG_INFO_TO_LL(vdev, vxge_hw_device_error_level_get(hldev),
                vxge_hw_device_trace_level_get(hldev));
 
+       kfree(ll_config);
        return 0;
 
 _exit5:
@@ -4412,6 +4420,7 @@ _exit2:
 _exit1:
        pci_disable_device(pdev);
 _exit0:
+       kfree(ll_config);
        kfree(device_config);
        driver_config->config_dev_cnt--;
        pci_set_drvdata(pdev, NULL);