i40e: Add support for HMC resource and profile for X722

This patch adds support for HMC resource and profile cmds for X722
firmware.

Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
index 5c4bf76..67e396b 100644 (file)
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h
@@ -204,6 +204,9 @@ enum i40e_admin_queue_opc {
        i40e_aqc_opc_suspend_port_tx                            = 0x041B,
        i40e_aqc_opc_resume_port_tx                             = 0x041C,
        i40e_aqc_opc_configure_partition_bw                     = 0x041D,
+       /* hmc */
+       i40e_aqc_opc_query_hmc_resource_profile = 0x0500,
+       i40e_aqc_opc_set_hmc_resource_profile   = 0x0501,
 
        /* phy commands*/
        i40e_aqc_opc_get_phy_abilities          = 0x0600,
@@ -1586,6 +1589,24 @@ struct i40e_aqc_configure_partition_bw_data {
 
 I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
 
+/* Get and set the active HMC resource profile and status.
+ * (direct 0x0500) and (direct 0x0501)
+ */
+struct i40e_aq_get_set_hmc_resource_profile {
+       u8      pm_profile;
+       u8      pe_vf_enabled;
+       u8      reserved[14];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aq_get_set_hmc_resource_profile);
+
+enum i40e_aq_hmc_profile {
+       /* I40E_HMC_PROFILE_NO_CHANGE   = 0, reserved */
+       I40E_HMC_PROFILE_DEFAULT        = 1,
+       I40E_HMC_PROFILE_FAVOR_VF       = 2,
+       I40E_HMC_PROFILE_EQUAL          = 3,
+};
+
 /* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
 
 /* set in param0 for get phy abilities to report qualified modules */

diff --git a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
index 0045650..40b0eaf 100644 (file)
--- a/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h
@@ -204,6 +204,9 @@ enum i40e_admin_queue_opc {
        i40e_aqc_opc_suspend_port_tx                            = 0x041B,
        i40e_aqc_opc_resume_port_tx                             = 0x041C,
        i40e_aqc_opc_configure_partition_bw                     = 0x041D,
+       /* hmc */
+       i40e_aqc_opc_query_hmc_resource_profile = 0x0500,
+       i40e_aqc_opc_set_hmc_resource_profile   = 0x0501,
 
        /* phy commands*/
        i40e_aqc_opc_get_phy_abilities          = 0x0600,
@@ -1583,6 +1586,24 @@ struct i40e_aqc_configure_partition_bw_data {
 
 I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
 
+/* Get and set the active HMC resource profile and status.
+ * (direct 0x0500) and (direct 0x0501)
+ */
+struct i40e_aq_get_set_hmc_resource_profile {
+       u8      pm_profile;
+       u8      pe_vf_enabled;
+       u8      reserved[14];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aq_get_set_hmc_resource_profile);
+
+enum i40e_aq_hmc_profile {
+       /* I40E_HMC_PROFILE_NO_CHANGE   = 0, reserved */
+       I40E_HMC_PROFILE_DEFAULT        = 1,
+       I40E_HMC_PROFILE_FAVOR_VF       = 2,
+       I40E_HMC_PROFILE_EQUAL          = 3,
+};
+
 /* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
 
 /* set in param0 for get phy abilities to report qualified modules */