[media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware
authorMichael Krufky <mkrufky@kernellabs.com>
Mon, 16 Apr 2012 17:59:32 +0000 (14:59 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Thu, 19 Apr 2012 12:43:37 +0000 (09:43 -0300)
Rather than loading firmware specific for the xtal frequency, just use
the standard firmware and set the xtal frequency after firmware upload.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/common/tuners/xc5000.c
drivers/media/common/tuners/xc5000.h

index 7f98984..eab2ea4 100644 (file)
@@ -54,6 +54,7 @@ struct xc5000_priv {
        struct list_head hybrid_tuner_instance_list;
 
        u32 if_khz;
+       u32 xtal_khz;
        u32 freq_hz;
        u32 bandwidth;
        u8  video_standard;
@@ -214,9 +215,9 @@ static const struct xc5000_fw_cfg xc5000a_1_6_114 = {
        .size = 12401,
 };
 
-static const struct xc5000_fw_cfg xc5000c_41_024_5_31875 = {
-       .name = "dvb-fe-xc5000c-41.024.5-31875.fw",
-       .size = 16503,
+static const struct xc5000_fw_cfg xc5000c_41_024_5 = {
+       .name = "dvb-fe-xc5000c-41.024.5.fw",
+       .size = 16497,
 };
 
 static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
@@ -226,7 +227,7 @@ static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id)
        case XC5000A:
                return &xc5000a_1_6_114;
        case XC5000C:
-               return &xc5000c_41_024_5_31875;
+               return &xc5000c_41_024_5;
        }
 }
 
@@ -572,6 +573,31 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode)
        return found;
 }
 
+static int xc_set_xtal(struct dvb_frontend *fe)
+{
+       struct xc5000_priv *priv = fe->tuner_priv;
+       int ret = XC_RESULT_SUCCESS;
+
+       switch (priv->chip_id) {
+       default:
+       case XC5000A:
+               /* 32.000 MHz xtal is default */
+               break;
+       case XC5000C:
+               switch (priv->xtal_khz) {
+               default:
+               case 32000:
+                       /* 32.000 MHz xtal is default */
+                       break;
+               case 31875:
+                       /* 31.875 MHz xtal configuration */
+                       ret = xc_write_reg(priv, 0x000f, 0x8081);
+                       break;
+               }
+               break;
+       }
+       return ret;
+}
 
 static int xc5000_fwupload(struct dvb_frontend *fe)
 {
@@ -603,6 +629,8 @@ static int xc5000_fwupload(struct dvb_frontend *fe)
        } else {
                printk(KERN_INFO "xc5000: firmware uploading...\n");
                ret = xc_load_i2c_sequence(fe,  fw->data);
+               if (XC_RESULT_SUCCESS == ret)
+                       ret = xc_set_xtal(fe);
                printk(KERN_INFO "xc5000: firmware upload complete...\n");
        }
 
@@ -1164,6 +1192,9 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
                priv->if_khz = cfg->if_khz;
        }
 
+       if (priv->xtal_khz == 0)
+               priv->xtal_khz = cfg->xtal_khz;
+
        if (priv->radio_input == 0)
                priv->radio_input = cfg->radio_input;
 
index 3396f8e..39a73bf 100644 (file)
@@ -34,6 +34,7 @@ struct xc5000_config {
        u8   i2c_address;
        u32  if_khz;
        u8   radio_input;
+       u32  xtal_khz;
 
        int chip_id;
 };