regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
In TPS6507x, depending on the status of DEFDCDC{2,3} pin either
DEFDCDC{2,3}_LOW or DEFDCDC{2,3}_HIGH register needs to be read or
programmed to change the output voltage.

The current driver assumes DEFDCDC{2,3} pins are always tied low
and thus operates only on DEFDCDC{2,3}_LOW register. This need
not always be the case (as is found on OMAP-L138 EVM).

Unfortunately, software cannot read the status of DEFDCDC{2,3} pins.
So, this information is passed through platform data depending on
how the board is wired.

Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index 14b4576..8152d65 100644 (file)
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/mfd/tps6507x.h>
@@ -101,9 +102,12 @@ struct tps_info {
        unsigned max_uV;
        u8 table_len;
        const u16 *table;
+
+       /* Does DCDC high or the low register defines output voltage? */
+       bool defdcdc_default;
 };
 
-static const struct tps_info tps6507x_pmic_regs[] = {
+static struct tps_info tps6507x_pmic_regs[] = {
        {
                .name = "VDCDC1",
                .min_uV = 725000,
@@ -145,7 +149,7 @@ struct tps6507x_pmic {
        struct regulator_desc desc[TPS6507X_NUM_REGULATOR];
        struct tps6507x_dev *mfd;
        struct regulator_dev *rdev[TPS6507X_NUM_REGULATOR];
-       const struct tps_info *info[TPS6507X_NUM_REGULATOR];
+       struct tps_info *info[TPS6507X_NUM_REGULATOR];
        struct mutex io_lock;
 };
 static inline int tps6507x_pmic_read(struct tps6507x_pmic *tps, u8 reg)
@@ -341,10 +345,16 @@ static int tps6507x_pmic_dcdc_get_voltage(struct regulator_dev *dev)
                reg = TPS6507X_REG_DEFDCDC1;
                break;
        case TPS6507X_DCDC_2:
-               reg = TPS6507X_REG_DEFDCDC2_LOW;
+               if (tps->info[dcdc]->defdcdc_default)
+                       reg = TPS6507X_REG_DEFDCDC2_HIGH;
+               else
+                       reg = TPS6507X_REG_DEFDCDC2_LOW;
                break;
        case TPS6507X_DCDC_3:
-               reg = TPS6507X_REG_DEFDCDC3_LOW;
+               if (tps->info[dcdc]->defdcdc_default)
+                       reg = TPS6507X_REG_DEFDCDC3_HIGH;
+               else
+                       reg = TPS6507X_REG_DEFDCDC3_LOW;
                break;
        default:
                return -EINVAL;
@@ -370,10 +380,16 @@ static int tps6507x_pmic_dcdc_set_voltage(struct regulator_dev *dev,
                reg = TPS6507X_REG_DEFDCDC1;
                break;
        case TPS6507X_DCDC_2:
-               reg = TPS6507X_REG_DEFDCDC2_LOW;
+               if (tps->info[dcdc]->defdcdc_default)
+                       reg = TPS6507X_REG_DEFDCDC2_HIGH;
+               else
+                       reg = TPS6507X_REG_DEFDCDC2_LOW;
                break;
        case TPS6507X_DCDC_3:
-               reg = TPS6507X_REG_DEFDCDC3_LOW;
+               if (tps->info[dcdc]->defdcdc_default)
+                       reg = TPS6507X_REG_DEFDCDC3_HIGH;
+               else
+                       reg = TPS6507X_REG_DEFDCDC3_LOW;
                break;
        default:
                return -EINVAL;
@@ -532,7 +548,7 @@ int tps6507x_pmic_probe(struct platform_device *pdev)
 {
        struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
        static int desc_id;
-       const struct tps_info *info = &tps6507x_pmic_regs[0];
+       struct tps_info *info = &tps6507x_pmic_regs[0];
        struct regulator_init_data *init_data;
        struct regulator_dev *rdev;
        struct tps6507x_pmic *tps;
@@ -569,6 +585,12 @@ int tps6507x_pmic_probe(struct platform_device *pdev)
        for (i = 0; i < TPS6507X_NUM_REGULATOR; i++, info++, init_data++) {
                /* Register the regulators */
                tps->info[i] = info;
+               if (init_data->driver_data) {
+                       struct tps6507x_reg_platform_data *data =
+                                                       init_data->driver_data;
+                       tps->info[i]->defdcdc_default = data->defdcdc_default;
+               }
+
                tps->desc[i].name = info->name;
                tps->desc[i].id = desc_id++;
                tps->desc[i].n_voltages = num_voltages[i];

diff --git a/include/linux/regulator/tps6507x.h b/include/linux/regulator/tps6507x.h
new file mode 100644 (file)
index 0000000..4892f59
--- /dev/null
+++ b/include/linux/regulator/tps6507x.h
@@ -0,0 +1,32 @@
+/*
+ * tps6507x.h  --  Voltage regulation for the Texas Instruments TPS6507X
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef REGULATOR_TPS6507X
+#define REGULATOR_TPS6507X
+
+/**
+ * tps6507x_reg_platform_data - platform data for tps6507x
+ * @defdcdc_default: Defines whether DCDC high or the low register controls
+ *     output voltage by default. Valid for DCDC2 and DCDC3 outputs only.
+ */
+struct tps6507x_reg_platform_data {
+       bool defdcdc_default;
+};
+
+#endif