#define S3C2410_GPIO_F_NR (32)
#define S3C2410_GPIO_G_NR (32)
#define S3C2410_GPIO_H_NR (32)
+#define S3C2410_GPIO_J_NR (32) /* technically 16. */
+#define S3C2410_GPIO_K_NR (32) /* technically 16. */
+#define S3C2410_GPIO_L_NR (32) /* technically 15. */
+#define S3C2410_GPIO_M_NR (32) /* technically 2. */
#if CONFIG_S3C_GPIO_SPACE != 0
#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+ S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+ S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+ S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+ S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
};
#endif /* __ASSEMBLY__ */
#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr))
/* compatibility until drivers can be modified */
* for the 2412/2413 from the 2410/2440/2442
*/
+/* S3C2443 and above */
+#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0)
+#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4)
+#define S3C2440_GPJUP S3C2410_GPIOREG(0xD8)
+
+#define S3C2443_GPKCON S3C2410_GPIOREG(0xE0)
+#define S3C2443_GPKDAT S3C2410_GPIOREG(0xE4)
+#define S3C2443_GPKUP S3C2410_GPIOREG(0xE8)
+
+#define S3C2443_GPLCON S3C2410_GPIOREG(0xF0)
+#define S3C2443_GPLDAT S3C2410_GPIOREG(0xF4)
+#define S3C2443_GPLUP S3C2410_GPIOREG(0xF8)
+
+#define S3C2443_GPMCON S3C2410_GPIOREG(0x100)
+#define S3C2443_GPMDAT S3C2410_GPIOREG(0x104)
+#define S3C2443_GPMUP S3C2410_GPIOREG(0x108)
+
/* miscellaneous control */
#define S3C2400_MISCCR S3C2410_GPIOREG(0x54)
#define S3C2410_MISCCR S3C2410_GPIOREG(0x80)
#define S3C2440_GPIO_BANKJ (416)
-#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0)
-#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4)
-#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8)
-
#define S3C2413_GPJCON S3C2410_GPIOREG(0x80)
#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84)
#define S3C2413_GPJUP S3C2410_GPIOREG(0x88)
/* linux/arch/arm/plat-s3c24xx/gpiolib.c
*
- * Copyright (c) 2008 Simtec Electronics
+ * Copyright (c) 2008-2010 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
.ngpio = 11,
},
},
+ /* GPIOS for the S3C2443 and later devices. */
+ {
+ .base = S3C2440_GPJCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPJ(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOJ",
+ .ngpio = 16,
+ },
+ }, {
+ .base = S3C2443_GPKCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPK(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOK",
+ .ngpio = 16,
+ },
+ }, {
+ .base = S3C2443_GPLCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPL(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOL",
+ .ngpio = 15,
+ },
+ }, {
+ .base = S3C2443_GPMCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPM(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOM",
+ .ngpio = 2,
+ },
+ },
};
+
static __init int s3c24xx_gpiolib_init(void)
{
struct s3c_gpio_chip *chip = s3c24xx_gpios;