regulator: ab8500: Added get_optimum_mode on regulators with idle mode
authorBengt Jonsson <bengt.g.jonsson@stericsson.com>
Thu, 21 Mar 2013 15:59:00 +0000 (15:59 +0000)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Fri, 22 Mar 2013 11:03:16 +0000 (12:03 +0100)
With this change, Vtvout, Vintcore12, Vaux1, 2 and 3 regulators
support DRMS (Dynamic Regulator Mode Switching) which will
dynamically handle requests for max current consumption from
several consumers and select a suitable regulator mode.

Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
drivers/regulator/ab8500.c

index 283d9a5..3465ac3 100644 (file)
@@ -31,6 +31,7 @@
  * @desc: regulator description
  * @regulator_dev: regulator device
  * @is_enabled: status of regulator (on/off)
+ * @load_lp_uA: maximum load in idle (low power) mode
  * @update_bank: bank to control on/off
  * @update_reg: register to control on/off
  * @update_mask: mask to enable/disable and set mode of regulator
@@ -48,6 +49,7 @@ struct ab8500_regulator_info {
        struct regulator_desc   desc;
        struct regulator_dev    *regulator;
        bool is_enabled;
+       int load_lp_uA;
        u8 update_bank;
        u8 update_reg;
        u8 update_mask;
@@ -156,6 +158,27 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev)
        return ret;
 }
 
+static unsigned int ab8500_regulator_get_optimum_mode(
+               struct regulator_dev *rdev, int input_uV,
+               int output_uV, int load_uA)
+{
+       unsigned int mode;
+
+       struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+       if (info == NULL) {
+               dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+               return -EINVAL;
+       }
+
+       if (load_uA <= info->load_lp_uA)
+               mode = REGULATOR_MODE_IDLE;
+       else
+               mode = REGULATOR_MODE_NORMAL;
+
+       return mode;
+}
+
 static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
                                     unsigned int mode)
 {
@@ -186,6 +209,12 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
                if (ret < 0)
                        dev_err(rdev_get_dev(rdev),
                                "couldn't set regulator mode\n");
+
+               dev_vdbg(rdev_get_dev(rdev),
+                       "%s-set_mode (bank, reg, mask, value): "
+                       "0x%x, 0x%x, 0x%x, 0x%x\n",
+                       info->desc.name, info->update_bank, info->update_reg,
+                       info->update_mask, info->update_val);
        }
 
        return ret;
@@ -313,23 +342,37 @@ static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
        return info->delay;
 }
 
-static struct regulator_ops ab8500_regulator_ops = {
-       .enable         = ab8500_regulator_enable,
-       .disable        = ab8500_regulator_disable,
-       .set_mode       = ab8500_regulator_set_mode,
-       .get_mode       = ab8500_regulator_get_mode,
-       .is_enabled     = ab8500_regulator_is_enabled,
-       .get_voltage_sel = ab8500_regulator_get_voltage_sel,
-       .set_voltage_sel = ab8500_regulator_set_voltage_sel,
-       .list_voltage   = regulator_list_voltage_table,
-       .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
+static struct regulator_ops ab8500_regulator_volt_mode_ops = {
+       .enable                 = ab8500_regulator_enable,
+       .disable                = ab8500_regulator_disable,
+       .is_enabled             = ab8500_regulator_is_enabled,
+       .get_optimum_mode       = ab8500_regulator_get_optimum_mode,
+       .set_mode               = ab8500_regulator_set_mode,
+       .get_mode               = ab8500_regulator_get_mode,
+       .get_voltage_sel        = ab8500_regulator_get_voltage_sel,
+       .set_voltage_sel        = ab8500_regulator_set_voltage_sel,
+       .list_voltage           = regulator_list_voltage_table,
+       .set_voltage_time_sel   = ab8500_regulator_set_voltage_time_sel,
 };
 
-static struct regulator_ops ab8500_regulator_fixed_ops = {
-       .enable         = ab8500_regulator_enable,
-       .disable        = ab8500_regulator_disable,
-       .is_enabled     = ab8500_regulator_is_enabled,
-       .list_voltage   = regulator_list_voltage_linear,
+static struct regulator_ops ab8500_regulator_mode_ops = {
+       .enable                 = ab8500_regulator_enable,
+       .disable                = ab8500_regulator_disable,
+       .is_enabled             = ab8500_regulator_is_enabled,
+       .get_optimum_mode       = ab8500_regulator_get_optimum_mode,
+       .set_mode               = ab8500_regulator_set_mode,
+       .get_mode               = ab8500_regulator_get_mode,
+       .get_voltage_sel        = ab8500_regulator_get_voltage_sel,
+       .list_voltage           = regulator_list_voltage_table,
+       .set_voltage_time_sel   = ab8500_regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops ab8500_regulator_ops = {
+       .enable                 = ab8500_regulator_enable,
+       .disable                = ab8500_regulator_disable,
+       .is_enabled             = ab8500_regulator_is_enabled,
+       .get_voltage_sel        = ab8500_regulator_get_voltage_sel,
+       .list_voltage           = regulator_list_voltage_table,
 };
 
 static struct ab8500_regulator_info
@@ -343,13 +386,14 @@ static struct ab8500_regulator_info
        [AB8500_LDO_AUX1] = {
                .desc = {
                        .name           = "LDO-AUX1",
-                       .ops            = &ab8500_regulator_ops,
+                       .ops            = &ab8500_regulator_volt_mode_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_AUX1,
                        .owner          = THIS_MODULE,
                        .n_voltages     = ARRAY_SIZE(ldo_vauxn_voltages),
                        .volt_table     = ldo_vauxn_voltages,
                },
+               .load_lp_uA             = 5000,
                .update_bank            = 0x04,
                .update_reg             = 0x09,
                .update_mask            = 0x03,
@@ -363,13 +407,14 @@ static struct ab8500_regulator_info
        [AB8500_LDO_AUX2] = {
                .desc = {
                        .name           = "LDO-AUX2",
-                       .ops            = &ab8500_regulator_ops,
+                       .ops            = &ab8500_regulator_volt_mode_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_AUX2,
                        .owner          = THIS_MODULE,
                        .n_voltages     = ARRAY_SIZE(ldo_vauxn_voltages),
                        .volt_table     = ldo_vauxn_voltages,
                },
+               .load_lp_uA             = 5000,
                .update_bank            = 0x04,
                .update_reg             = 0x09,
                .update_mask            = 0x0c,
@@ -383,13 +428,14 @@ static struct ab8500_regulator_info
        [AB8500_LDO_AUX3] = {
                .desc = {
                        .name           = "LDO-AUX3",
-                       .ops            = &ab8500_regulator_ops,
+                       .ops            = &ab8500_regulator_volt_mode_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_AUX3,
                        .owner          = THIS_MODULE,
                        .n_voltages     = ARRAY_SIZE(ldo_vaux3_voltages),
                        .volt_table     = ldo_vaux3_voltages,
                },
+               .load_lp_uA             = 5000,
                .update_bank            = 0x04,
                .update_reg             = 0x0a,
                .update_mask            = 0x03,
@@ -403,13 +449,14 @@ static struct ab8500_regulator_info
        [AB8500_LDO_INTCORE] = {
                .desc = {
                        .name           = "LDO-INTCORE",
-                       .ops            = &ab8500_regulator_ops,
+                       .ops            = &ab8500_regulator_volt_mode_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_INTCORE,
                        .owner          = THIS_MODULE,
                        .n_voltages     = ARRAY_SIZE(ldo_vintcore_voltages),
                        .volt_table     = ldo_vintcore_voltages,
                },
+               .load_lp_uA             = 5000,
                .update_bank            = 0x03,
                .update_reg             = 0x80,
                .update_mask            = 0x44,
@@ -430,7 +477,7 @@ static struct ab8500_regulator_info
        [AB8500_LDO_TVOUT] = {
                .desc = {
                        .name           = "LDO-TVOUT",
-                       .ops            = &ab8500_regulator_fixed_ops,
+                       .ops            = &ab8500_regulator_mode_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_TVOUT,
                        .owner          = THIS_MODULE,
@@ -439,10 +486,13 @@ static struct ab8500_regulator_info
                        .enable_time    = 10000,
                },
                .delay                  = 10000,
+               .load_lp_uA             = 1000,
                .update_bank            = 0x03,
                .update_reg             = 0x80,
                .update_mask            = 0x82,
                .update_val             = 0x02,
+               .update_val_idle        = 0x82,
+               .update_val_normal      = 0x02,
        },
        [AB8500_LDO_USB] = {
                .desc = {
@@ -458,10 +508,14 @@ static struct ab8500_regulator_info
                .update_reg             = 0x82,
                .update_mask            = 0x03,
        },
+
+       /*
+        * Regulators with fixed voltage and normal mode
+        */
        [AB8500_LDO_AUDIO] = {
                .desc = {
                        .name           = "LDO-AUDIO",
-                       .ops            = &ab8500_regulator_fixed_ops,
+                       .ops            = &ab8500_regulator_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_AUDIO,
                        .owner          = THIS_MODULE,
@@ -476,7 +530,7 @@ static struct ab8500_regulator_info
        [AB8500_LDO_ANAMIC1] = {
                .desc = {
                        .name           = "LDO-ANAMIC1",
-                       .ops            = &ab8500_regulator_fixed_ops,
+                       .ops            = &ab8500_regulator_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_ANAMIC1,
                        .owner          = THIS_MODULE,
@@ -491,7 +545,7 @@ static struct ab8500_regulator_info
        [AB8500_LDO_ANAMIC2] = {
                .desc = {
                        .name           = "LDO-ANAMIC2",
-                       .ops            = &ab8500_regulator_fixed_ops,
+                       .ops            = &ab8500_regulator_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_ANAMIC2,
                        .owner          = THIS_MODULE,
@@ -506,7 +560,7 @@ static struct ab8500_regulator_info
        [AB8500_LDO_DMIC] = {
                .desc = {
                        .name           = "LDO-DMIC",
-                       .ops            = &ab8500_regulator_fixed_ops,
+                       .ops            = &ab8500_regulator_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_DMIC,
                        .owner          = THIS_MODULE,
@@ -518,20 +572,27 @@ static struct ab8500_regulator_info
                .update_mask            = 0x04,
                .update_val             = 0x04,
        },
+
+       /*
+        * Regulators with fixed voltage and normal/idle modes
+        */
        [AB8500_LDO_ANA] = {
                .desc = {
                        .name           = "LDO-ANA",
-                       .ops            = &ab8500_regulator_fixed_ops,
+                       .ops            = &ab8500_regulator_mode_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8500_LDO_ANA,
                        .owner          = THIS_MODULE,
                        .n_voltages     = 1,
                        .min_uV         = 1200000,
                },
+               .load_lp_uA             = 1000,
                .update_bank            = 0x04,
                .update_reg             = 0x06,
                .update_mask            = 0x0c,
                .update_val             = 0x04,
+               .update_val_idle        = 0x0c,
+               .update_val_normal      = 0x04,
        },