#define FLOAT_ONE 0x3f800000
#define FLOAT_TWO 0x40000000
#define FLOAT_THREE 0x40400000
+#define FLOAT_EIGHT 0x41000000
#define FLOAT_MINUS_5 0xc0a00000
#define UNSOL_TAG_DSP 0x16
static const char *dirstr[2] = { "Playback", "Capture" };
+#define NUM_OF_OUTPUTS 3
enum {
SPEAKER_OUT,
- HEADPHONE_OUT
+ HEADPHONE_OUT,
+ SURROUND_OUT
};
enum {
LINE_MIC_IN
};
+/* Strings for Input Source Enum Control */
+static const char *in_src_str[3] = {"Rear Mic", "Line", "Front Mic" };
+#define IN_SRC_NUM_OF_INPUTS 3
+enum {
+ REAR_MIC,
+ REAR_LINE_IN,
+ FRONT_MIC,
+};
+
enum {
#define VNODE_START_NID 0x80
VNID_SPK = VNODE_START_NID, /* Speaker vnid */
VOICEFX = IN_EFFECT_END_NID,
PLAY_ENHANCEMENT,
CRYSTAL_VOICE,
- EFFECT_END_NID
+ EFFECT_END_NID,
+ OUTPUT_SOURCE_ENUM,
+ INPUT_SOURCE_ENUM
#define EFFECTS_COUNT (EFFECT_END_NID - EFFECT_START_NID)
};
}
};
+/* DSP command sequences for ca0132_alt_select_out */
+#define ALT_OUT_SET_MAX_COMMANDS 9 /* Max number of commands in sequence */
+struct ca0132_alt_out_set {
+ char *name; /*preset name*/
+ unsigned char commands;
+ unsigned int mids[ALT_OUT_SET_MAX_COMMANDS];
+ unsigned int reqs[ALT_OUT_SET_MAX_COMMANDS];
+ unsigned int vals[ALT_OUT_SET_MAX_COMMANDS];
+};
+
+static const struct ca0132_alt_out_set alt_out_presets[] = {
+ { .name = "Line Out",
+ .commands = 7,
+ .mids = { 0x96, 0x96, 0x96, 0x8F,
+ 0x96, 0x96, 0x96 },
+ .reqs = { 0x19, 0x17, 0x18, 0x01,
+ 0x1F, 0x15, 0x3A },
+ .vals = { 0x3F000000, 0x42A00000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000 }
+ },
+ { .name = "Headphone",
+ .commands = 7,
+ .mids = { 0x96, 0x96, 0x96, 0x8F,
+ 0x96, 0x96, 0x96 },
+ .reqs = { 0x19, 0x17, 0x18, 0x01,
+ 0x1F, 0x15, 0x3A },
+ .vals = { 0x3F000000, 0x42A00000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000 }
+ },
+ { .name = "Surround",
+ .commands = 8,
+ .mids = { 0x96, 0x8F, 0x96, 0x96,
+ 0x96, 0x96, 0x96, 0x96 },
+ .reqs = { 0x18, 0x01, 0x1F, 0x15,
+ 0x3A, 0x1A, 0x1B, 0x1C },
+ .vals = { 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000 }
+ }
+};
+
enum hda_cmd_vendor_io {
/* for DspIO node */
VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000,
long effects_switch[EFFECTS_COUNT];
long voicefx_val;
long cur_mic_boost;
+ /* ca0132_alt control related values */
+ unsigned char in_enum_val;
+ unsigned char out_enum_val;
struct hda_codec *codec;
struct delayed_work unsol_hp_work;
R3DI_DSP_DOWNLOADED = 1
};
+
+static void r3di_gpio_mic_set(struct hda_codec *codec,
+ enum r3di_mic_select cur_mic)
+{
+ unsigned int cur_gpio;
+
+ /* Get the current GPIO Data setup */
+ cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0);
+
+ switch (cur_mic) {
+ case R3DI_REAR_MIC:
+ cur_gpio &= ~(1 << R3DI_MIC_SELECT_BIT);
+ break;
+ case R3DI_FRONT_MIC:
+ cur_gpio |= (1 << R3DI_MIC_SELECT_BIT);
+ break;
+ }
+ snd_hda_codec_write(codec, codec->core.afg, 0,
+ AC_VERB_SET_GPIO_DATA, cur_gpio);
+}
+
+static void r3di_gpio_out_set(struct hda_codec *codec,
+ enum r3di_out_select cur_out)
+{
+ unsigned int cur_gpio;
+
+ /* Get the current GPIO Data setup */
+ cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0);
+
+ switch (cur_out) {
+ case R3DI_HEADPHONE_OUT:
+ cur_gpio &= ~(1 << R3DI_OUT_SELECT_BIT);
+ break;
+ case R3DI_LINE_OUT:
+ cur_gpio |= (1 << R3DI_OUT_SELECT_BIT);
+ break;
+ }
+ snd_hda_codec_write(codec, codec->core.afg, 0,
+ AC_VERB_SET_GPIO_DATA, cur_gpio);
+}
+
static void r3di_gpio_dsp_status_set(struct hda_codec *codec,
enum r3di_dsp_status dsp_status)
{
return err < 0 ? err : 0;
}
+/*
+ * This function behaves similarly to the ca0132_select_out funciton above,
+ * except with a few differences. It adds the ability to select the current
+ * output with an enumerated control "output source" if the auto detect
+ * mute switch is set to off. If the auto detect mute switch is enabled, it
+ * will detect either headphone or lineout(SPEAKER_OUT) from jack detection.
+ * It also adds the ability to auto-detect the front headphone port. The only
+ * way to select surround is to disable auto detect, and set Surround with the
+ * enumerated control.
+ */
+static int ca0132_alt_select_out(struct hda_codec *codec)
+{
+ struct ca0132_spec *spec = codec->spec;
+ unsigned int pin_ctl;
+ int jack_present;
+ int auto_jack;
+ unsigned int i;
+ unsigned int tmp;
+ int err;
+ /* Default Headphone is rear headphone */
+ hda_nid_t headphone_nid = spec->out_pins[1];
+
+ codec_dbg(codec, "%s\n", __func__);
+
+ snd_hda_power_up_pm(codec);
+
+ auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID];
+
+ /*
+ * If headphone rear or front is plugged in, set to headphone.
+ * If neither is plugged in, set to rear line out. Only if
+ * hp/speaker auto detect is enabled.
+ */
+ if (auto_jack) {
+ jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_hp) ||
+ snd_hda_jack_detect(codec, spec->unsol_tag_front_hp);
+
+ if (jack_present)
+ spec->cur_out_type = HEADPHONE_OUT;
+ else
+ spec->cur_out_type = SPEAKER_OUT;
+ } else
+ spec->cur_out_type = spec->out_enum_val;
+
+ /* Begin DSP output switch */
+ tmp = FLOAT_ONE;
+ err = dspio_set_uint_param(codec, 0x96, 0x3A, tmp);
+ if (err < 0)
+ goto exit;
+
+ switch (spec->cur_out_type) {
+ case SPEAKER_OUT:
+ codec_dbg(codec, "%s speaker\n", __func__);
+ /*speaker out config*/
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ writew(0x0007, spec->mem_base + 0x320);
+ writew(0x0104, spec->mem_base + 0x320);
+ writew(0x0101, spec->mem_base + 0x320);
+ chipio_set_control_param(codec, 0x0D, 0x18);
+ break;
+ case QUIRK_R3DI:
+ chipio_set_control_param(codec, 0x0D, 0x24);
+ r3di_gpio_out_set(codec, R3DI_LINE_OUT);
+ break;
+ }
+
+ /* disable headphone node */
+ pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_set_pin_ctl(codec, spec->out_pins[1],
+ pin_ctl & ~PIN_HP);
+ /* enable line-out node */
+ pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_set_pin_ctl(codec, spec->out_pins[0],
+ pin_ctl | PIN_OUT);
+ /* Enable EAPD */
+ snd_hda_codec_write(codec, spec->out_pins[0], 0,
+ AC_VERB_SET_EAPD_BTLENABLE, 0x01);
+
+ /* If PlayEnhancement is enabled, set different source */
+ if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID])
+ dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE);
+ else
+ dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_EIGHT);
+ break;
+ case HEADPHONE_OUT:
+ codec_dbg(codec, "%s hp\n", __func__);
+ /* Headphone out config*/
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ writew(0x0107, spec->mem_base + 0x320);
+ writew(0x0104, spec->mem_base + 0x320);
+ writew(0x0001, spec->mem_base + 0x320);
+ chipio_set_control_param(codec, 0x0D, 0x12);
+ break;
+ case QUIRK_R3DI:
+ chipio_set_control_param(codec, 0x0D, 0x21);
+ r3di_gpio_out_set(codec, R3DI_HEADPHONE_OUT);
+ break;
+ }
+
+ snd_hda_codec_write(codec, spec->out_pins[0], 0,
+ AC_VERB_SET_EAPD_BTLENABLE, 0x00);
+
+ /* disable speaker*/
+ pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_set_pin_ctl(codec, spec->out_pins[0],
+ pin_ctl & ~PIN_HP);
+
+ /* enable headphone, either front or rear */
+
+ if (snd_hda_jack_detect(codec, spec->unsol_tag_front_hp))
+ headphone_nid = spec->out_pins[2];
+ else if (snd_hda_jack_detect(codec, spec->unsol_tag_hp))
+ headphone_nid = spec->out_pins[1];
+
+ pin_ctl = snd_hda_codec_read(codec, headphone_nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_set_pin_ctl(codec, headphone_nid,
+ pin_ctl | PIN_HP);
+
+ if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID])
+ dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE);
+ else
+ dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ZERO);
+ break;
+ case SURROUND_OUT:
+ codec_dbg(codec, "%s surround\n", __func__);
+ /* Surround out config*/
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ writew(0x0007, spec->mem_base + 0x320);
+ writew(0x0104, spec->mem_base + 0x320);
+ writew(0x0101, spec->mem_base + 0x320);
+ chipio_set_control_param(codec, 0x0D, 0x18);
+ break;
+ case QUIRK_R3DI:
+ chipio_set_control_param(codec, 0x0D, 0x24);
+ r3di_gpio_out_set(codec, R3DI_LINE_OUT);
+ break;
+ }
+ /* enable line out node */
+ pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_set_pin_ctl(codec, spec->out_pins[0],
+ pin_ctl | PIN_OUT);
+ /* Disable headphone out */
+ pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_set_pin_ctl(codec, spec->out_pins[1],
+ pin_ctl & ~PIN_HP);
+ /* Enable EAPD on line out */
+ snd_hda_codec_write(codec, spec->out_pins[0], 0,
+ AC_VERB_SET_EAPD_BTLENABLE, 0x01);
+ /* enable center/lfe out node */
+ pin_ctl = snd_hda_codec_read(codec, spec->out_pins[2], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_set_pin_ctl(codec, spec->out_pins[2],
+ pin_ctl | PIN_OUT);
+ /* Now set rear surround node as out. */
+ pin_ctl = snd_hda_codec_read(codec, spec->out_pins[3], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ snd_hda_set_pin_ctl(codec, spec->out_pins[3],
+ pin_ctl | PIN_OUT);
+
+ if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID])
+ dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE);
+ else
+ dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_EIGHT);
+ break;
+ }
+
+ /* run through the output dsp commands for line-out */
+ for (i = 0; i < alt_out_presets[spec->cur_out_type].commands; i++) {
+ err = dspio_set_uint_param(codec,
+ alt_out_presets[spec->cur_out_type].mids[i],
+ alt_out_presets[spec->cur_out_type].reqs[i],
+ alt_out_presets[spec->cur_out_type].vals[i]);
+
+ if (err < 0)
+ goto exit;
+ }
+
+exit:
+ snd_hda_power_down_pm(codec);
+
+ return err < 0 ? err : 0;
+}
+
static void ca0132_unsol_hp_delayed(struct work_struct *work)
{
struct ca0132_spec *spec = container_of(
to_delayed_work(work), struct ca0132_spec, unsol_hp_work);
struct hda_jack_tbl *jack;
- ca0132_select_out(spec->codec);
+ if (spec->use_alt_functions)
+ ca0132_alt_select_out(spec->codec);
+ else
+ ca0132_select_out(spec->codec);
+
jack = snd_hda_jack_tbl_get(spec->codec, spec->unsol_tag_hp);
if (jack) {
jack->block_report = 0;
}
/*
+ * Select the active input.
+ * Mic detection isn't used, because it's kind of pointless on the SBZ.
+ * The front mic has no jack-detection, so the only way to switch to it
+ * is to do it manually in alsamixer.
+ */
+static int ca0132_alt_select_in(struct hda_codec *codec)
+{
+ struct ca0132_spec *spec = codec->spec;
+ unsigned int tmp;
+
+ codec_dbg(codec, "%s\n", __func__);
+
+ snd_hda_power_up_pm(codec);
+
+ chipio_set_stream_control(codec, 0x03, 0);
+ chipio_set_stream_control(codec, 0x04, 0);
+
+ spec->cur_mic_type = spec->in_enum_val;
+
+ switch (spec->cur_mic_type) {
+ case REAR_MIC:
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ writew(0x0000, spec->mem_base + 0x320);
+ tmp = FLOAT_THREE;
+ break;
+ case QUIRK_R3DI:
+ r3di_gpio_mic_set(codec, R3DI_REAR_MIC);
+ tmp = FLOAT_ONE;
+ break;
+ default:
+ tmp = FLOAT_ONE;
+ break;
+ }
+
+ chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
+ if (spec->quirk == QUIRK_R3DI)
+ chipio_set_conn_rate(codec, 0x0F, SR_96_000);
+
+ dspio_set_uint_param(codec, 0x80, 0x00, tmp);
+
+ chipio_set_stream_control(codec, 0x03, 1);
+ chipio_set_stream_control(codec, 0x04, 1);
+
+ if (spec->quirk == QUIRK_SBZ) {
+ chipio_write(codec, 0x18B098, 0x0000000C);
+ chipio_write(codec, 0x18B09C, 0x0000000C);
+ }
+ break;
+ case REAR_LINE_IN:
+ ca0132_mic_boost_set(codec, 0);
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ writew(0x0000, spec->mem_base + 0x320);
+ break;
+ case QUIRK_R3DI:
+ r3di_gpio_mic_set(codec, R3DI_REAR_MIC);
+ break;
+ }
+
+ chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
+ if (spec->quirk == QUIRK_R3DI)
+ chipio_set_conn_rate(codec, 0x0F, SR_96_000);
+
+ tmp = FLOAT_ZERO;
+ dspio_set_uint_param(codec, 0x80, 0x00, tmp);
+
+ if (spec->quirk == QUIRK_SBZ) {
+ chipio_write(codec, 0x18B098, 0x00000000);
+ chipio_write(codec, 0x18B09C, 0x00000000);
+ }
+
+ chipio_set_stream_control(codec, 0x03, 1);
+ chipio_set_stream_control(codec, 0x04, 1);
+ break;
+ case FRONT_MIC:
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ writew(0x0100, spec->mem_base + 0x320);
+ writew(0x0005, spec->mem_base + 0x320);
+ tmp = FLOAT_THREE;
+ break;
+ case QUIRK_R3DI:
+ r3di_gpio_mic_set(codec, R3DI_FRONT_MIC);
+ tmp = FLOAT_ONE;
+ break;
+ default:
+ tmp = FLOAT_ONE;
+ break;
+ }
+
+ chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000);
+ if (spec->quirk == QUIRK_R3DI)
+ chipio_set_conn_rate(codec, 0x0F, SR_96_000);
+
+ dspio_set_uint_param(codec, 0x80, 0x00, tmp);
+
+ chipio_set_stream_control(codec, 0x03, 1);
+ chipio_set_stream_control(codec, 0x04, 1);
+
+ if (spec->quirk == QUIRK_SBZ) {
+ chipio_write(codec, 0x18B098, 0x0000000C);
+ chipio_write(codec, 0x18B09C, 0x000000CC);
+ }
+ break;
+ }
+
+ snd_hda_power_down_pm(codec);
+ return 0;
+
+}
+
+/*
* Check if VNODE settings take effect immediately.
*/
static bool ca0132_is_vnode_effective(struct hda_codec *codec,
val = 0;
/* If Voice Focus on SBZ, set to two channel. */
- if ((nid == VOICE_FOCUS) && (spec->quirk == QUIRK_SBZ)) {
+ if ((nid == VOICE_FOCUS) && (spec->quirk == QUIRK_SBZ)
+ && (spec->cur_mic_type != REAR_LINE_IN)) {
if (spec->effects_switch[CRYSTAL_VOICE -
EFFECT_START_NID]) {
* For SBZ noise reduction, there's an extra command
* to module ID 0x47. No clue why.
*/
- if ((nid == NOISE_REDUCTION) && (spec->quirk == QUIRK_SBZ)) {
+ if ((nid == NOISE_REDUCTION) && (spec->quirk == QUIRK_SBZ)
+ && (spec->cur_mic_type != REAR_LINE_IN)) {
if (spec->effects_switch[CRYSTAL_VOICE -
EFFECT_START_NID]) {
if (spec->effects_switch[NOISE_REDUCTION -
dspio_set_uint_param(codec, 0x47, 0x00, tmp);
}
+
+ /* If rear line in disable effects. */
+ if (spec->use_alt_functions &&
+ spec->in_enum_val == REAR_LINE_IN)
+ val = 0;
}
codec_dbg(codec, "ca0132_effect_set: nid=0x%x, val=%ld\n",
codec_dbg(codec, "ca0132_pe_switch_set: val=%ld\n",
spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]);
+ if (spec->use_alt_functions)
+ ca0132_alt_select_out(codec);
+
i = OUT_EFFECT_START_NID - EFFECT_START_NID;
nid = OUT_EFFECT_START_NID;
/* PE affects all out effects */
if (nid == VNID_HP_SEL) {
auto_jack =
spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID];
- if (!auto_jack)
- ca0132_select_out(codec);
+ if (!auto_jack) {
+ if (spec->use_alt_functions)
+ ca0132_alt_select_out(codec);
+ else
+ ca0132_select_out(codec);
+ }
return 1;
}
}
if (nid == VNID_HP_ASEL) {
- ca0132_select_out(codec);
+ if (spec->use_alt_functions)
+ ca0132_alt_select_out(codec);
+ else
+ ca0132_select_out(codec);
return 1;
}
}
/* End of control change helpers. */
+/*
+ * Input Select Control for alternative ca0132 codecs. This exists because
+ * front microphone has no auto-detect, and we need a way to set the rear
+ * as line-in
+ */
+static int ca0132_alt_input_source_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = IN_SRC_NUM_OF_INPUTS;
+ if (uinfo->value.enumerated.item >= IN_SRC_NUM_OF_INPUTS)
+ uinfo->value.enumerated.item = IN_SRC_NUM_OF_INPUTS - 1;
+ strcpy(uinfo->value.enumerated.name,
+ in_src_str[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int ca0132_alt_input_source_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct ca0132_spec *spec = codec->spec;
+
+ ucontrol->value.enumerated.item[0] = spec->in_enum_val;
+ return 0;
+}
+
+static int ca0132_alt_input_source_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct ca0132_spec *spec = codec->spec;
+ int sel = ucontrol->value.enumerated.item[0];
+ unsigned int items = IN_SRC_NUM_OF_INPUTS;
+
+ if (sel >= items)
+ return 0;
+
+ codec_dbg(codec, "ca0132_alt_input_select: sel=%d, preset=%s\n",
+ sel, in_src_str[sel]);
+
+ spec->in_enum_val = sel;
+
+ ca0132_alt_select_in(codec);
+
+ return 1;
+}
+
+/* Sound Blaster Z Output Select Control */
+static int ca0132_alt_output_select_get_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = NUM_OF_OUTPUTS;
+ if (uinfo->value.enumerated.item >= NUM_OF_OUTPUTS)
+ uinfo->value.enumerated.item = NUM_OF_OUTPUTS - 1;
+ strcpy(uinfo->value.enumerated.name,
+ alt_out_presets[uinfo->value.enumerated.item].name);
+ return 0;
+}
+
+static int ca0132_alt_output_select_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct ca0132_spec *spec = codec->spec;
+
+ ucontrol->value.enumerated.item[0] = spec->out_enum_val;
+ return 0;
+}
+
+static int ca0132_alt_output_select_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct ca0132_spec *spec = codec->spec;
+ int sel = ucontrol->value.enumerated.item[0];
+ unsigned int items = NUM_OF_OUTPUTS;
+ unsigned int auto_jack;
+
+ if (sel >= items)
+ return 0;
+
+ codec_dbg(codec, "ca0132_alt_output_select: sel=%d, preset=%s\n",
+ sel, alt_out_presets[sel].name);
+
+ spec->out_enum_val = sel;
+
+ auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID];
+
+ if (!auto_jack)
+ ca0132_alt_select_out(codec);
+
+ return 1;
+}
+
static int ca0132_voicefx_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
/* mic boost */
if (nid == spec->input_pins[0]) {
spec->cur_mic_boost = *valp;
+ if (spec->use_alt_functions) {
+ if (spec->in_enum_val != REAR_LINE_IN)
+ changed = ca0132_mic_boost_set(codec, *valp);
+ } else {
+ /* Mic boost does not apply to Digital Mic */
+ if (spec->cur_mic_type != DIGITAL_MIC)
+ changed = ca0132_mic_boost_set(codec, *valp);
+ }
- /* Mic boost does not apply to Digital Mic */
- if (spec->cur_mic_type != DIGITAL_MIC)
- changed = ca0132_mic_boost_set(codec, *valp);
goto exit;
}
}
/*
+ * Create an Output Select enumerated control for codecs with surround
+ * out capabilities.
+ */
+static int ca0132_alt_add_output_enum(struct hda_codec *codec)
+{
+ struct snd_kcontrol_new knew =
+ HDA_CODEC_MUTE_MONO("Output Select",
+ OUTPUT_SOURCE_ENUM, 1, 0, HDA_OUTPUT);
+ knew.info = ca0132_alt_output_select_get_info;
+ knew.get = ca0132_alt_output_select_get;
+ knew.put = ca0132_alt_output_select_put;
+ return snd_hda_ctl_add(codec, OUTPUT_SOURCE_ENUM,
+ snd_ctl_new1(&knew, codec));
+}
+
+/*
+ * Create an Input Source enumerated control for the alternate ca0132 codecs
+ * because the front microphone has no auto-detect, and Line-in has to be set
+ * somehow.
+ */
+static int ca0132_alt_add_input_enum(struct hda_codec *codec)
+{
+ struct snd_kcontrol_new knew =
+ HDA_CODEC_MUTE_MONO("Input Source",
+ INPUT_SOURCE_ENUM, 1, 0, HDA_INPUT);
+ knew.info = ca0132_alt_input_source_info;
+ knew.get = ca0132_alt_input_source_get;
+ knew.put = ca0132_alt_input_source_put;
+ return snd_hda_ctl_add(codec, INPUT_SOURCE_ENUM,
+ snd_ctl_new1(&knew, codec));
+}
+
+/*
* When changing Node IDs for Mixer Controls below, make sure to update
* Node IDs in ca0132_config() as well.
*/
add_voicefx(codec);
+ /*
+ * If the codec uses alt_functions, you need the enumerated controls
+ * to select the new outputs and inputs, plus add the new mic boost
+ * setting control.
+ */
+ if (spec->use_alt_functions) {
+ ca0132_alt_add_output_enum(codec);
+ ca0132_alt_add_input_enum(codec);
+ }
#ifdef ENABLE_TUNING_CONTROLS
add_tuning_ctls(codec);
#endif
mutex_init(&spec->chipio_mutex);
spec->cur_out_type = SPEAKER_OUT;
- spec->cur_mic_type = DIGITAL_MIC;
+ if (!spec->use_alt_functions)
+ spec->cur_mic_type = DIGITAL_MIC;
+ else
+ spec->cur_mic_type = REAR_MIC;
+
spec->cur_mic_boost = 0;
for (i = 0; i < VNODES_COUNT; i++) {
VENDOR_CHIPIO_PARAM_EX_VALUE_SET, 0x20);
}
- if (spec->quirk == QUIRK_SBZ) {
+ if (spec->quirk == QUIRK_SBZ)
ca0132_gpio_setup(codec);
- sbz_setup_defaults(codec);
- }
snd_hda_sequence_write(codec, spec->spec_init_verbs);
-
- ca0132_select_out(codec);
- ca0132_select_mic(codec);
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ sbz_setup_defaults(codec);
+ ca0132_alt_select_out(codec);
+ ca0132_alt_select_in(codec);
+ break;
+ case QUIRK_R3DI:
+ ca0132_alt_select_out(codec);
+ ca0132_alt_select_in(codec);
+ break;
+ default:
+ ca0132_select_out(codec);
+ ca0132_select_mic(codec);
+ break;
+ }
snd_hda_jack_report_sync(codec);
projects / platform / kernel / linux-rpi.git / commitdiff