+++ /dev/null
-# Copyright 2012 the V8 project authors. All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided
-# with the distribution.
-# * Neither the name of Google Inc. nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-# Variable default definitions. Override them by exporting them in your shell.
-CXX ?= g++
-LINK ?= g++
-OUTDIR ?= out
-TESTJOBS ?=
-# TODO(bnoordhuis) Make i18n support configurable.
-GYPFLAGS ?= -Dv8_enable_i18n_support=0
-TESTFLAGS ?=
-ANDROID_NDK_ROOT ?=
-ANDROID_NDK_HOST_ARCH ?=
-ANDROID_TOOLCHAIN ?=
-ANDROID_V8 ?= /data/local/tmp/v8
-NACL_SDK_ROOT ?=
-
-# Special build flags. Use them like this: "make library=shared"
-
-# library=shared || component=shared_library
-ifeq ($(library), shared)
- GYPFLAGS += -Dcomponent=shared_library
-endif
-ifdef component
- GYPFLAGS += -Dcomponent=$(component)
-endif
-# console=readline
-ifdef console
- GYPFLAGS += -Dconsole=$(console)
-endif
-# disassembler=on
-ifeq ($(disassembler), on)
- GYPFLAGS += -Dv8_enable_disassembler=1
-endif
-# objectprint=on
-ifeq ($(objectprint), on)
- GYPFLAGS += -Dv8_object_print=1
-endif
-# verifyheap=on
-ifeq ($(verifyheap), on)
- GYPFLAGS += -Dv8_enable_verify_heap=1
-endif
-# backtrace=off
-ifeq ($(backtrace), off)
- GYPFLAGS += -Dv8_enable_backtrace=0
-else
- GYPFLAGS += -Dv8_enable_backtrace=1
-endif
-# verifypredictable=on
-ifeq ($(verifypredictable), on)
- GYPFLAGS += -Dv8_enable_verify_predictable=1
-endif
-# snapshot=off
-ifeq ($(snapshot), off)
- GYPFLAGS += -Dv8_use_snapshot='false'
-endif
-# extrachecks=on/off
-ifeq ($(extrachecks), on)
- GYPFLAGS += -Dv8_enable_extra_checks=1 -Dv8_enable_handle_zapping=1
-endif
-ifeq ($(extrachecks), off)
- GYPFLAGS += -Dv8_enable_extra_checks=0 -Dv8_enable_handle_zapping=0
-endif
-# gdbjit=on/off
-ifeq ($(gdbjit), on)
- GYPFLAGS += -Dv8_enable_gdbjit=1
-endif
-ifeq ($(gdbjit), off)
- GYPFLAGS += -Dv8_enable_gdbjit=0
-endif
-# vtunejit=on
-ifeq ($(vtunejit), on)
- GYPFLAGS += -Dv8_enable_vtunejit=1
-endif
-# optdebug=on
-ifeq ($(optdebug), on)
- GYPFLAGS += -Dv8_optimized_debug=2
-endif
-# unalignedaccess=on
-ifeq ($(unalignedaccess), on)
- GYPFLAGS += -Dv8_can_use_unaligned_accesses=true
-endif
-# randomseed=12345, disable random seed via randomseed=0
-ifdef randomseed
- GYPFLAGS += -Dv8_random_seed=$(randomseed)
-endif
-# soname_version=1.2.3
-ifdef soname_version
- GYPFLAGS += -Dsoname_version=$(soname_version)
-endif
-# werror=no
-ifeq ($(werror), no)
- GYPFLAGS += -Dwerror=''
-endif
-# presubmit=no
-ifeq ($(presubmit), no)
- TESTFLAGS += --no-presubmit
-endif
-# strictaliasing=off (workaround for GCC-4.5)
-ifeq ($(strictaliasing), off)
- GYPFLAGS += -Dv8_no_strict_aliasing=1
-endif
-# regexp=interpreted
-ifeq ($(regexp), interpreted)
- GYPFLAGS += -Dv8_interpreted_regexp=1
-endif
-# i18nsupport=off
-ifeq ($(i18nsupport), off)
- GYPFLAGS += -Dv8_enable_i18n_support=0
- TESTFLAGS += --noi18n
-endif
-# deprecation_warnings=on
-ifeq ($(deprecationwarnings), on)
- GYPFLAGS += -Dv8_deprecation_warnings=1
-endif
-# asan=/path/to/clang++
-ifneq ($(strip $(asan)),)
- GYPFLAGS += -Dasan=1
- export CXX=$(asan)
- export CXX_host=$(asan)
- export LINK=$(asan)
- export ASAN_SYMBOLIZER_PATH="$(dir $(asan))llvm-symbolizer"
-endif
-
-# arm specific flags.
-# arm_version=<number | "default">
-ifneq ($(strip $(arm_version)),)
- GYPFLAGS += -Darm_version=$(arm_version)
-else
-# Deprecated (use arm_version instead): armv7=false/true
-ifeq ($(armv7), false)
- GYPFLAGS += -Darm_version=6
-else
-ifeq ($(armv7), true)
- GYPFLAGS += -Darm_version=7
-endif
-endif
-endif
-# hardfp=on/off. Deprecated, use armfloatabi
-ifeq ($(hardfp),on)
- GYPFLAGS += -Darm_float_abi=hard
-else
-ifeq ($(hardfp),off)
- GYPFLAGS += -Darm_float_abi=softfp
-endif
-endif
-# fpu: armfpu=xxx
-# xxx: vfp, vfpv3-d16, vfpv3, neon.
-ifeq ($(armfpu),)
- GYPFLAGS += -Darm_fpu=default
-else
- GYPFLAGS += -Darm_fpu=$(armfpu)
-endif
-# float abi: armfloatabi=softfp/hard
-ifeq ($(armfloatabi),)
-ifeq ($(hardfp),)
- GYPFLAGS += -Darm_float_abi=default
-endif
-else
- GYPFLAGS += -Darm_float_abi=$(armfloatabi)
-endif
-# armthumb=on/off
-ifeq ($(armthumb), off)
- GYPFLAGS += -Darm_thumb=0
-else
-ifeq ($(armthumb), on)
- GYPFLAGS += -Darm_thumb=1
-endif
-endif
-# arm_test_noprobe=on
-# With this flag set, by default v8 will only use features implied
-# by the compiler (no probe). This is done by modifying the default
-# values of enable_armv7, enable_vfp3, enable_32dregs and enable_neon.
-# Modifying these flags when launching v8 will enable the probing for
-# the specified values.
-ifeq ($(arm_test_noprobe), on)
- GYPFLAGS += -Darm_test_noprobe=on
-endif
-
-# ----------------- available targets: --------------------
-# - "builddeps": pulls in external dependencies for building
-# - "dependencies": pulls in all external dependencies
-# - "grokdump": rebuilds heap constants lists used by grokdump
-# - any arch listed in ARCHES (see below)
-# - any mode listed in MODES
-# - every combination <arch>.<mode>, e.g. "ia32.release"
-# - "native": current host's architecture, release mode
-# - any of the above with .check appended, e.g. "ia32.release.check"
-# - "android": cross-compile for Android/ARM
-# - "nacl" : cross-compile for Native Client (ia32 and x64)
-# - default (no target specified): build all DEFAULT_ARCHES and MODES
-# - "check": build all targets and run all tests
-# - "<arch>.clean" for any <arch> in ARCHES
-# - "clean": clean all ARCHES
-
-# ----------------- internal stuff ------------------------
-
-# Architectures and modes to be compiled. Consider these to be internal
-# variables, don't override them (use the targets instead).
-ARCHES = ia32 x64 x32 arm arm64 mips mipsel mips64el x87
-DEFAULT_ARCHES = ia32 x64 arm
-MODES = release debug optdebug
-DEFAULT_MODES = release debug
-ANDROID_ARCHES = android_ia32 android_arm android_arm64 android_mipsel android_x87
-NACL_ARCHES = nacl_ia32 nacl_x64
-
-# List of files that trigger Makefile regeneration:
-GYPFILES = \
- common.gypi \
- deps/cares/cares.gyp \
- deps/http_parser/http_parser.gyp \
- deps/openssl/openssl.gyp \
- deps/uv/uv.gyp \
- deps/v8/tools/gyp/v8.gyp \
- deps/zlib/zlib.gyp \
- node.gyp \
-
-# If vtunejit=on, the v8vtune.gyp will be appended.
-ifeq ($(vtunejit), on)
- GYPFILES += src/third_party/vtune/v8vtune.gyp
-endif
-# Generates all combinations of ARCHES and MODES, e.g. "ia32.release".
-BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES)))
-ANDROID_BUILDS = $(foreach mode,$(MODES), \
- $(addsuffix .$(mode),$(ANDROID_ARCHES)))
-NACL_BUILDS = $(foreach mode,$(MODES), \
- $(addsuffix .$(mode),$(NACL_ARCHES)))
-# Generates corresponding test targets, e.g. "ia32.release.check".
-CHECKS = $(addsuffix .check,$(BUILDS))
-QUICKCHECKS = $(addsuffix .quickcheck,$(BUILDS))
-ANDROID_CHECKS = $(addsuffix .check,$(ANDROID_BUILDS))
-NACL_CHECKS = $(addsuffix .check,$(NACL_BUILDS))
-# File where previously used GYPFLAGS are stored.
-ENVFILE = $(OUTDIR)/environment
-
-.PHONY: all check clean builddeps dependencies $(ENVFILE).new native \
- qc quickcheck $(QUICKCHECKS) \
- $(addsuffix .quickcheck,$(MODES)) $(addsuffix .quickcheck,$(ARCHES)) \
- $(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \
- $(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) \
- $(ANDROID_ARCHES) $(ANDROID_BUILDS) $(ANDROID_CHECKS) \
- must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN \
- $(NACL_ARCHES) $(NACL_BUILDS) $(NACL_CHECKS) \
- must-set-NACL_SDK_ROOT
-
-# Target definitions. "all" is the default.
-all: $(DEFAULT_MODES)
-
-# Special target for the buildbots to use. Depends on $(OUTDIR)/Makefile
-# having been created before.
-buildbot:
- $(MAKE) -C "$(OUTDIR)" BUILDTYPE=$(BUILDTYPE) \
- builddir="$(abspath $(OUTDIR))/$(BUILDTYPE)"
-
-# Compile targets. MODES and ARCHES are convenience targets.
-.SECONDEXPANSION:
-$(MODES): $(addsuffix .$$@,$(DEFAULT_ARCHES))
-
-$(ARCHES): $(addprefix $$@.,$(DEFAULT_MODES))
-
-# Defines how to build a particular target (e.g. ia32.release).
-$(BUILDS): $(OUTDIR)/Makefile.$$@
- @$(MAKE) -C "$(OUTDIR)" -f Makefile.$@ \
- CXX="$(CXX)" LINK="$(LINK)" \
- BUILDTYPE=$(shell echo $(subst .,,$(suffix $@)) | \
- python -c "print \
- raw_input().replace('opt', '').capitalize()") \
- builddir="$(shell pwd)/$(OUTDIR)/$@"
-
-native: $(OUTDIR)/Makefile.native
- @$(MAKE) -C "$(OUTDIR)" -f Makefile.native \
- CXX="$(CXX)" LINK="$(LINK)" BUILDTYPE=Release \
- builddir="$(shell pwd)/$(OUTDIR)/$@"
-
-$(ANDROID_ARCHES): $(addprefix $$@.,$(MODES))
-
-$(ANDROID_BUILDS): $(GYPFILES) $(ENVFILE) build/android.gypi \
- must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN Makefile.android
- @$(MAKE) -f Makefile.android $@ \
- ARCH="$(basename $@)" \
- MODE="$(subst .,,$(suffix $@))" \
- OUTDIR="$(OUTDIR)" \
- GYPFLAGS="$(GYPFLAGS)"
-
-$(NACL_ARCHES): $(addprefix $$@.,$(MODES))
-
-$(NACL_BUILDS): $(GYPFILES) $(ENVFILE) \
- Makefile.nacl must-set-NACL_SDK_ROOT
- @$(MAKE) -f Makefile.nacl $@ \
- ARCH="$(basename $@)" \
- MODE="$(subst .,,$(suffix $@))" \
- OUTDIR="$(OUTDIR)" \
- GYPFLAGS="$(GYPFLAGS)"
-
-# Test targets.
-check: all
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch=$(shell echo $(DEFAULT_ARCHES) | sed -e 's/ /,/g') \
- $(TESTFLAGS)
-
-$(addsuffix .check,$(MODES)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --mode=$(basename $@) $(TESTFLAGS)
-
-$(addsuffix .check,$(ARCHES)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch=$(basename $@) $(TESTFLAGS)
-
-$(CHECKS): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(basename $@) $(TESTFLAGS)
-
-$(addsuffix .quickcheck,$(MODES)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --mode=$(basename $@) $(TESTFLAGS) --quickcheck
-
-$(addsuffix .quickcheck,$(ARCHES)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch=$(basename $@) $(TESTFLAGS) --quickcheck
-
-$(QUICKCHECKS): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(basename $@) $(TESTFLAGS) --quickcheck
-
-$(addsuffix .sync, $(ANDROID_BUILDS)): $$(basename $$@)
- @tools/android-sync.sh $(basename $@) $(OUTDIR) \
- $(shell pwd) $(ANDROID_V8)
-
-$(addsuffix .check, $(ANDROID_BUILDS)): $$(basename $$@).sync
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(basename $@) \
- --timeout=600 \
- --command-prefix="tools/android-run.py" $(TESTFLAGS)
-
-$(addsuffix .check, $(ANDROID_ARCHES)): \
- $(addprefix $$(basename $$@).,$(MODES)).check
-
-$(addsuffix .check, $(NACL_BUILDS)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(basename $@) \
- --timeout=600 --nopresubmit --noi18n \
- --command-prefix="tools/nacl-run.py"
-
-$(addsuffix .check, $(NACL_ARCHES)): \
- $(addprefix $$(basename $$@).,$(MODES)).check
-
-native.check: native
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR)/native \
- --arch-and-mode=. $(TESTFLAGS)
-
-SUPERFASTTESTMODES = ia32.release
-FASTTESTMODES = $(SUPERFASTTESTMODES),x64.release,ia32.optdebug,x64.optdebug,arm.optdebug,arm64.release
-FASTCOMPILEMODES = $(FASTTESTMODES),arm64.optdebug
-
-COMMA = ,
-EMPTY =
-SPACE = $(EMPTY) $(EMPTY)
-quickcheck: $(subst $(COMMA),$(SPACE),$(FASTCOMPILEMODES))
- tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(SUPERFASTTESTMODES) $(TESTFLAGS) --quickcheck \
- --download-data mozilla webkit
- tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(FASTTESTMODES) $(TESTFLAGS) --quickcheck
-qc: quickcheck
-
-# Clean targets. You can clean each architecture individually, or everything.
-$(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)):
- rm -f $(OUTDIR)/Makefile.$(basename $@)*
- rm -rf $(OUTDIR)/$(basename $@).release
- rm -rf $(OUTDIR)/$(basename $@).debug
- rm -rf $(OUTDIR)/$(basename $@).optdebug
- find $(OUTDIR) -regex '.*\(host\|target\)\.$(basename $@).*\.mk' -delete
-
-native.clean:
- rm -f $(OUTDIR)/Makefile.native
- rm -rf $(OUTDIR)/native
- find $(OUTDIR) -regex '.*\(host\|target\)\.native\.mk' -delete
-
-clean: $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)) native.clean gtags.clean
-
-# GYP file generation targets.
-OUT_MAKEFILES = $(addprefix $(OUTDIR)/Makefile.,$(BUILDS))
-$(OUT_MAKEFILES): $(GYPFILES) $(ENVFILE)
- $(eval CXX_TARGET_ARCH:=$(shell $(CXX) -v 2>&1 | grep ^Target: | \
- cut -f 2 -d " " | cut -f 1 -d "-" ))
- $(eval CXX_TARGET_ARCH:=$(subst aarch64,arm64,$(CXX_TARGET_ARCH)))
- $(eval V8_TARGET_ARCH:=$(subst .,,$(suffix $(basename $@))))
- GYP_GENERATORS=make \
- tools/gyp/gyp --generator-output="$(OUTDIR)" node.gyp \
- -Icommon.gypi --depth=. \
- -Dtarget_arch=$(V8_TARGET_ARCH) \
- -Dv8_target_arch=$(V8_TARGET_ARCH) \
- $(if $(findstring $(CXX_TARGET_ARCH),$(V8_TARGET_ARCH)), \
- -Dtarget_arch=$(V8_TARGET_ARCH),) \
- $(if $(findstring optdebug,$@),-Dv8_optimized_debug=2,) \
- -S$(suffix $(basename $@))$(suffix $@) $(GYPFLAGS)
-
-$(OUTDIR)/Makefile.native: $(GYPFILES) $(ENVFILE)
- GYP_GENERATORS=make \
- tools/gyp/gyp --generator-output="$(OUTDIR)" node.gyp \
- -Icommon.gypi --depth=. -S.native $(GYPFLAGS)
-
-must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN:
-ifndef ANDROID_NDK_ROOT
-ifndef ANDROID_TOOLCHAIN
- $(error ANDROID_NDK_ROOT or ANDROID_TOOLCHAIN must be set))
-endif
-endif
-
-# Note that NACL_SDK_ROOT must be set to point to an appropriate
-# Native Client SDK before using this makefile. You can download
-# an SDK here:
-# https://developers.google.com/native-client/sdk/download
-# The path indicated by NACL_SDK_ROOT will typically end with
-# a folder for a pepper version such as "pepper_25" that should
-# have "tools" and "toolchain" subdirectories.
-must-set-NACL_SDK_ROOT:
-ifndef NACL_SDK_ROOT
- $(error NACL_SDK_ROOT must be set)
-endif
-
-# Replaces the old with the new environment file if they're different, which
-# will trigger GYP to regenerate Makefiles.
-$(ENVFILE): $(ENVFILE).new
- @if test -r $(ENVFILE) && cmp $(ENVFILE).new $(ENVFILE) > /dev/null; \
- then rm $(ENVFILE).new; \
- else mv $(ENVFILE).new $(ENVFILE); fi
-
-# Stores current GYPFLAGS in a file.
-$(ENVFILE).new:
- @mkdir -p $(OUTDIR); echo "GYPFLAGS=$(GYPFLAGS)" > $(ENVFILE).new; \
- echo "CXX=$(CXX)" >> $(ENVFILE).new
-
-# Heap constants for grokdump.
-DUMP_FILE = tools/v8heapconst.py
-grokdump: ia32.release
- @cat $(DUMP_FILE).tmpl > $(DUMP_FILE)
- @$(OUTDIR)/ia32.release/d8 --dump-heap-constants >> $(DUMP_FILE)
-
-# Support for the GNU GLOBAL Source Code Tag System.
-gtags.files: $(GYPFILES) $(ENVFILE)
- @find include src test -name '*.h' -o -name '*.cc' -o -name '*.c' > $@
-
-# We need to manually set the stack limit here, to work around bugs in
-# gmake-3.81 and global-5.7.1 on recent 64-bit Linux systems.
-GPATH GRTAGS GSYMS GTAGS: gtags.files $(shell cat gtags.files 2> /dev/null)
- @bash -c 'ulimit -s 10240 && GTAGSFORCECPP=yes gtags -i -q -f $<'
-
-gtags.clean:
- rm -f gtags.files GPATH GRTAGS GSYMS GTAGS
-
-# Dependencies. "builddeps" are dependencies required solely for building,
-# "dependencies" includes also dependencies required for development.
-# Remember to keep these in sync with the DEPS file.
-builddeps:
- svn checkout --force http://gyp.googlecode.com/svn/trunk build/gyp \
- --revision 1831
- if svn info third_party/icu 2>&1 | grep -q icu46 ; then \
- svn switch --force \
- https://src.chromium.org/chrome/trunk/deps/third_party/icu52 \
- third_party/icu --revision 277999 ; \
- else \
- svn checkout --force \
- https://src.chromium.org/chrome/trunk/deps/third_party/icu52 \
- third_party/icu --revision 277999 ; \
- fi
- svn checkout --force http://googletest.googlecode.com/svn/trunk \
- testing/gtest --revision 692
- svn checkout --force http://googlemock.googlecode.com/svn/trunk \
- testing/gmock --revision 485
-
-dependencies: builddeps
- # The spec is a copy of the hooks in v8's DEPS file.
- gclient sync -r fb782d4369d5ae04f17a2fceef7de5a63e50f07b --spec="solutions = [{u'managed': False, u'name': u'buildtools', u'url': u'https://chromium.googlesource.com/chromium/buildtools.git', u'custom_deps': {}, u'custom_hooks': [{u'name': u'clang_format_win',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=win32',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/win/clang-format.exe.sha1']},{u'name': u'clang_format_mac',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=darwin',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/mac/clang-format.sha1']},{u'name': u'clang_format_linux',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=linux*',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/linux64/clang-format.sha1']}],u'deps_file': u'.DEPS.git', u'safesync_url': u''}]"
projects / platform / upstream / nodejs.git / commitdiff