C-SKY: Use an autoconf template to produce `preconfigure'

Avoid fiddling with autoconf internals and use AC_DEFINE_UNQUOTED to
define macros in the configuration headers rather than handcoding an
equivalent shell sequence with the use of the `as_echo' undocumented
variable.

Switch to using AC_MSG_ERROR rather than `echo' and `exit' directly for
error handling.  Owing to the lack of any kind of error annotation it
makes it difficult to spot the message in the flood in a parallel build
and neither it is logged in `config.log'.

diff --git a/sysdeps/csky/preconfigure b/sysdeps/csky/preconfigure
index 5f22416..8a6136d 100644 (file)
--- a/sysdeps/csky/preconfigure
+++ b/sysdeps/csky/preconfigure
@@ -1,3 +1,6 @@
+# This file is generated from configure.ac by Autoconf.  DO NOT EDIT!
+# Local preconfigure fragment for sysdeps/csky
+
 case "$machine" in
 csky*)
     abi=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
@@ -11,16 +14,14 @@ csky*)
 
     case "$abi" in
     1)
-        echo "glibc does not support abiv1 yet" >&2
-        exit 1
-        ;;
+       as_fn_error 1 "glibc does not support abiv1 yet" "$LINENO" 5
+       ;;
     2)
-        machine=abiv2
-        ;;
+       machine=abiv2
+       ;;
     *)
-        echo "Unknown abi" >&2
-        exit 1
-        ;;
+       as_fn_error 1 "Unknown abi" "$LINENO" 5
+       ;;
     esac
 
     # __CSKY_HARD_FLOAT_ABI__ was added on gcc 11 to specify whether
@@ -48,7 +49,13 @@ csky*)
     base_machine=csky
     machine=csky/$machine
 
-    $as_echo "#define CSKYABI $abi" >>confdefs.h
-    $as_echo "#define CSKY_HARD_FLOAT $with_fp_cond" >>confdefs.h
+    cat >>confdefs.h <<_ACEOF
+#define CSKYABI $abi
+_ACEOF
+
+    cat >>confdefs.h <<_ACEOF
+#define CSKY_HARD_FLOAT $with_fp_cond
+_ACEOF
+
     ;;
 esac

diff --git a/sysdeps/csky/preconfigure.ac b/sysdeps/csky/preconfigure.ac
new file mode 100644 (file)
index 0000000..332c0f1
--- /dev/null
+++ b/sysdeps/csky/preconfigure.ac
@@ -0,0 +1,55 @@
+GLIBC_PROVIDES[]dnl See aclocal.m4 in the top level source directory.
+# Local preconfigure fragment for sysdeps/csky
+
+case "$machine" in
+csky*)
+    abi=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
+      sed -n 's/^#define __CSKYABI__ \(.*\)/\1/p'`
+    hard_float=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
+      sed -n 's/^#define __CSKY_HARD_FLOAT__ \(.*\)/\1/p'`
+    hard_float_sf=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
+      sed -n 's/^#define __CSKY_HARD_FLOAT_FPU_SF__ \(.*\)/\1/p'`
+    hard_float_abi=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
+      sed -n 's/^#define __CSKY_HARD_FLOAT_ABI__ \(.*\)/\1/p'`
+
+    case "$abi" in
+    1)
+       AC_MSG_ERROR([glibc does not support abiv1 yet], [1])
+       ;;
+    2)
+       machine=abiv2
+       ;;
+    *)
+       AC_MSG_ERROR([Unknown abi], [1])
+       ;;
+    esac
+
+    # __CSKY_HARD_FLOAT_ABI__ was added on gcc 11 to specify whether
+    # -mfloat-abi=hard is set.  On older gcc, the float ABI is defined solely
+    # with __CSKY_HARD_FLOAT__.  If __CSKY_HARD_FLOAT__ is set, it can be
+    # either a hard-float ABI (gcc older than 11, or gcc11 -mfloat-abi=hard
+    # (__CSKY_HARD_FLOAT_ABI__ is set) or -mfloat-abi=softfp
+    # (__CSKY_HARD_FLOAT_ABI__ is not set). To be compatible with older gcc,
+    # use __CSKY_HARD_FLOAT_FPU_SF__ identify if -mfloat-abi is supported,
+    # because it is added to gcc at the same time as -mfloat-abi.
+    if test -n "$hard_float"; then
+       if test -z "$hard_float_sf"; then
+           with_fp_cond=1
+       else
+           if test -n "$hard_float_abi"; then
+               with_fp_cond=1
+           else
+               with_fp_cond=0
+           fi
+       fi
+    else
+       with_fp_cond=0
+    fi
+
+    base_machine=csky
+    machine=csky/$machine
+
+    AC_DEFINE_UNQUOTED([CSKYABI], [$abi])
+    AC_DEFINE_UNQUOTED([CSKY_HARD_FLOAT], [$with_fp_cond])
+    ;;
+esac