watchdog: w83627hf: Add support for W83697HF and W83697UG

Major difference is that the watchdog control and counter registers
are different on both chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4fa8428..4c4c566 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -902,6 +902,8 @@ config W83627HF_WDT
                W83637HF
                W83667HG/HG-B
                W83687THF
+               W83697HF
+               W83697UG
                NCT6775
                NCT6776
                NCT6779

diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 954becd..6937306 100644 (file)
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -45,10 +45,12 @@
 #define WATCHDOG_TIMEOUT 60            /* 60 sec default timeout */
 
 static int wdt_io;
+static int cr_wdt_timeout;     /* WDT timeout register */
+static int cr_wdt_control;     /* WDT control register */
 
-enum chips { w83627hf, w83627s, w83637hf, w83627thf, w83687thf,
-            w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p, w83667hg_b,
-            nct6775, nct6776, nct6779 };
+enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
+            w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
+            w83667hg_b, nct6775, nct6776, nct6779 };
 
 static int timeout;                    /* in seconds */
 module_param(timeout, int, 0);
@@ -75,6 +77,8 @@ MODULE_PARM_DESC(nowayout,
 
 #define W83627HF_ID            0x52
 #define W83627S_ID             0x59
+#define W83697HF_ID            0x60
+#define W83697UG_ID            0x68
 #define W83637HF_ID            0x70
 #define W83627THF_ID           0x82
 #define W83687THF_ID           0x85
@@ -88,6 +92,12 @@ MODULE_PARM_DESC(nowayout,
 #define NCT6776_ID             0xc3
 #define NCT6779_ID             0xc5
 
+#define W83627HF_WDT_TIMEOUT   0xf6
+#define W83697HF_WDT_TIMEOUT   0xf4
+
+#define W83627HF_WDT_CONTROL   0xf5
+#define W83697HF_WDT_CONTROL   0xf3
+
 static void superio_outb(int reg, int val)
 {
        outb(reg, WDT_EFER);
@@ -144,6 +154,17 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
                t = superio_inb(0x2B) & ~0x10;
                superio_outb(0x2B, t); /* set GPIO24 to WDT0 */
                break;
+       case w83697hf:
+               /* Set pin 119 to WDTO# mode (= CR29, WDT0) */
+               t = superio_inb(0x29) & ~0x60;
+               t |= 0x20;
+               superio_outb(0x29, t);
+               break;
+       case w83697ug:
+               /* Set pin 118 to WDTO# mode */
+               t = superio_inb(0x2b) & ~0x04;
+               superio_outb(0x2b, t);
+               break;
        case w83627thf:
                t = (superio_inb(0x2B) & ~0x08) | 0x04;
                superio_outb(0x2B, t); /* set GPIO3 to WDT0 */
@@ -152,10 +173,10 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
        case w83627dhg_p:
                t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */
                superio_outb(0x2D, t); /* set GPIO5 to WDT0 */
-               t = superio_inb(0xF5);
+               t = superio_inb(cr_wdt_control);
                t |= 0x02;      /* enable the WDTO# output low pulse
                                 * to the KBRST# pin */
-               superio_outb(0xF5, t);
+               superio_outb(cr_wdt_control, t);
                break;
        case w83637hf:
                break;
@@ -176,25 +197,25 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
                 * Don't touch its configuration, and hope the BIOS
                 * does the right thing.
                 */
-               t = superio_inb(0xF5);
+               t = superio_inb(cr_wdt_control);
                t |= 0x02;      /* enable the WDTO# output low pulse
                                 * to the KBRST# pin */
-               superio_outb(0xF5, t);
+               superio_outb(cr_wdt_control, t);
                break;
        default:
                break;
        }
 
-       t = superio_inb(0xF6);
+       t = superio_inb(cr_wdt_timeout);
        if (t != 0) {
                pr_info("Watchdog already running. Resetting timeout to %d sec\n",
                        wdog->timeout);
-               superio_outb(0xF6, wdog->timeout);
+               superio_outb(cr_wdt_timeout, wdog->timeout);
        }
 
        /* set second mode & disable keyboard turning off watchdog */
-       t = superio_inb(0xF5) & ~0x0C;
-       superio_outb(0xF5, t);
+       t = superio_inb(cr_wdt_control) & ~0x0C;
+       superio_outb(cr_wdt_control, t);
 
        /* disable keyboard & mouse turning off watchdog */
        t = superio_inb(0xF7) & ~0xC0;
@@ -214,7 +235,7 @@ static int wdt_set_time(unsigned int timeout)
                return ret;
 
        superio_select(W83627HF_LD_WDT);
-       superio_outb(0xF6, timeout);
+       superio_outb(cr_wdt_timeout, timeout);
        superio_exit();
 
        return 0;
@@ -247,7 +268,7 @@ static unsigned int wdt_get_time(struct watchdog_device *wdog)
                return 0;
 
        superio_select(W83627HF_LD_WDT);
-       timeleft = superio_inb(0xF6);
+       timeleft = superio_inb(cr_wdt_timeout);
        superio_exit();
 
        return timeleft;
@@ -304,6 +325,9 @@ static int wdt_find(int addr)
        u8 val;
        int ret;
 
+       cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
+       cr_wdt_control = W83627HF_WDT_CONTROL;
+
        ret = superio_enter();
        if (ret)
                return ret;
@@ -316,6 +340,16 @@ static int wdt_find(int addr)
        case W83627S_ID:
                ret = w83627s;
                break;
+       case W83697HF_ID:
+               ret = w83697hf;
+               cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
+               cr_wdt_control = W83697HF_WDT_CONTROL;
+               break;
+       case W83697UG_ID:
+               ret = w83697ug;
+               cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
+               cr_wdt_control = W83697HF_WDT_CONTROL;
+               break;
        case W83637HF_ID:
                ret = w83637hf;
                break;
@@ -371,6 +405,8 @@ static int __init wdt_init(void)
        const char * const chip_name[] = {
                "W83627HF",
                "W83627S",
+               "W83697HF",
+               "W83697UG",
                "W83637HF",
                "W83627THF",
                "W83687THF",