CONFIG_PL330=y
CONFIG_CADENCE=y
CONFIG_XGMAC=y
+CONFIG_ONENAND=y
CONFIG_VERSATILE_PCI=y
CONFIG_VERSATILE_I2C=y
CONFIG_PCI_HOTPLUG=y
CONFIG_MC146818RTC=y
CONFIG_WDT_IB700=y
+CONFIG_PC_SYSFW=y
CONFIG_PTIMER=y
CONFIG_PFLASH_CFI02=y
CONFIG_ISA_MMIO=y
+CONFIG_SH4=y
CONFIG_IDE_MMIO=y
CONFIG_PTIMER=y
CONFIG_PFLASH_CFI02=y
CONFIG_ISA_MMIO=y
+CONFIG_SH4=y
CONFIG_IDE_MMIO=y
CONFIG_PCI_HOTPLUG=y
CONFIG_MC146818RTC=y
CONFIG_WDT_IB700=y
+CONFIG_PC_SYSFW=y
obj-y += omap_dss.o soc_dma.o omap_gptimer.o omap_synctimer.o \
omap_gpmc.o omap_sdrc.o omap_spi.o omap_tap.o omap_l4.o
obj-y += tsc210x.o
-obj-y += blizzard.o onenand.o cbus.o tusb6010.o
+obj-y += blizzard.o cbus.o tusb6010.o
obj-y += mst_fpga.o
obj-y += bitbang_i2c.o marvell_88w8618_audio.o
obj-y += framebuffer.o
common-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
common-obj-$(CONFIG_XEN_BACKEND) += xen_disk.o
common-obj-$(CONFIG_ECC) += ecc.o
+common-obj-$(CONFIG_ONENAND) += onenand.o
+common-obj-$(CONFIG_PC_SYSFW) += pc_sysfw.o
+
+obj-$(CONFIG_SH4) += tc58128.o
obj-$(CONFIG_VIRTIO) += virtio-blk.o
obj-$(CONFIG_VIRTIO_BLK_DATA_PLANE) += dataplane/
--- /dev/null
+/*
+ * OneNAND flash memories emulation.
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Written by Andrzej Zaborowski <andrew@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu-common.h"
+#include "hw/hw.h"
+#include "hw/block/flash.h"
+#include "hw/irq.h"
+#include "sysemu/blockdev.h"
+#include "exec/memory.h"
+#include "exec/address-spaces.h"
+#include "hw/sysbus.h"
+#include "qemu/error-report.h"
+
+/* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */
+#define PAGE_SHIFT 11
+
+/* Fixed */
+#define BLOCK_SHIFT (PAGE_SHIFT + 6)
+
+typedef struct {
+ SysBusDevice busdev;
+ struct {
+ uint16_t man;
+ uint16_t dev;
+ uint16_t ver;
+ } id;
+ int shift;
+ hwaddr base;
+ qemu_irq intr;
+ qemu_irq rdy;
+ BlockDriverState *bdrv;
+ BlockDriverState *bdrv_cur;
+ uint8_t *image;
+ uint8_t *otp;
+ uint8_t *current;
+ MemoryRegion ram;
+ MemoryRegion mapped_ram;
+ uint8_t current_direction;
+ uint8_t *boot[2];
+ uint8_t *data[2][2];
+ MemoryRegion iomem;
+ MemoryRegion container;
+ int cycle;
+ int otpmode;
+
+ uint16_t addr[8];
+ uint16_t unladdr[8];
+ int bufaddr;
+ int count;
+ uint16_t command;
+ uint16_t config[2];
+ uint16_t status;
+ uint16_t intstatus;
+ uint16_t wpstatus;
+
+ ECCState ecc;
+
+ int density_mask;
+ int secs;
+ int secs_cur;
+ int blocks;
+ uint8_t *blockwp;
+} OneNANDState;
+
+enum {
+ ONEN_BUF_BLOCK = 0,
+ ONEN_BUF_BLOCK2 = 1,
+ ONEN_BUF_DEST_BLOCK = 2,
+ ONEN_BUF_DEST_PAGE = 3,
+ ONEN_BUF_PAGE = 7,
+};
+
+enum {
+ ONEN_ERR_CMD = 1 << 10,
+ ONEN_ERR_ERASE = 1 << 11,
+ ONEN_ERR_PROG = 1 << 12,
+ ONEN_ERR_LOAD = 1 << 13,
+};
+
+enum {
+ ONEN_INT_RESET = 1 << 4,
+ ONEN_INT_ERASE = 1 << 5,
+ ONEN_INT_PROG = 1 << 6,
+ ONEN_INT_LOAD = 1 << 7,
+ ONEN_INT = 1 << 15,
+};
+
+enum {
+ ONEN_LOCK_LOCKTIGHTEN = 1 << 0,
+ ONEN_LOCK_LOCKED = 1 << 1,
+ ONEN_LOCK_UNLOCKED = 1 << 2,
+};
+
+static void onenand_mem_setup(OneNANDState *s)
+{
+ /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
+ * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
+ * write boot commands. Also take note of the BWPS bit. */
+ memory_region_init(&s->container, "onenand", 0x10000 << s->shift);
+ memory_region_add_subregion(&s->container, 0, &s->iomem);
+ memory_region_init_alias(&s->mapped_ram, "onenand-mapped-ram",
+ &s->ram, 0x0200 << s->shift,
+ 0xbe00 << s->shift);
+ memory_region_add_subregion_overlap(&s->container,
+ 0x0200 << s->shift,
+ &s->mapped_ram,
+ 1);
+}
+
+static void onenand_intr_update(OneNANDState *s)
+{
+ qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1);
+}
+
+static void onenand_pre_save(void *opaque)
+{
+ OneNANDState *s = opaque;
+ if (s->current == s->otp) {
+ s->current_direction = 1;
+ } else if (s->current == s->image) {
+ s->current_direction = 2;
+ } else {
+ s->current_direction = 0;
+ }
+}
+
+static int onenand_post_load(void *opaque, int version_id)
+{
+ OneNANDState *s = opaque;
+ switch (s->current_direction) {
+ case 0:
+ break;
+ case 1:
+ s->current = s->otp;
+ break;
+ case 2:
+ s->current = s->image;
+ break;
+ default:
+ return -1;
+ }
+ onenand_intr_update(s);
+ return 0;
+}
+
+static const VMStateDescription vmstate_onenand = {
+ .name = "onenand",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .pre_save = onenand_pre_save,
+ .post_load = onenand_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(current_direction, OneNANDState),
+ VMSTATE_INT32(cycle, OneNANDState),
+ VMSTATE_INT32(otpmode, OneNANDState),
+ VMSTATE_UINT16_ARRAY(addr, OneNANDState, 8),
+ VMSTATE_UINT16_ARRAY(unladdr, OneNANDState, 8),
+ VMSTATE_INT32(bufaddr, OneNANDState),
+ VMSTATE_INT32(count, OneNANDState),
+ VMSTATE_UINT16(command, OneNANDState),
+ VMSTATE_UINT16_ARRAY(config, OneNANDState, 2),
+ VMSTATE_UINT16(status, OneNANDState),
+ VMSTATE_UINT16(intstatus, OneNANDState),
+ VMSTATE_UINT16(wpstatus, OneNANDState),
+ VMSTATE_INT32(secs_cur, OneNANDState),
+ VMSTATE_PARTIAL_VBUFFER(blockwp, OneNANDState, blocks),
+ VMSTATE_UINT8(ecc.cp, OneNANDState),
+ VMSTATE_UINT16_ARRAY(ecc.lp, OneNANDState, 2),
+ VMSTATE_UINT16(ecc.count, OneNANDState),
+ VMSTATE_BUFFER_POINTER_UNSAFE(otp, OneNANDState, 0,
+ ((64 + 2) << PAGE_SHIFT)),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+/* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */
+static void onenand_reset(OneNANDState *s, int cold)
+{
+ memset(&s->addr, 0, sizeof(s->addr));
+ s->command = 0;
+ s->count = 1;
+ s->bufaddr = 0;
+ s->config[0] = 0x40c0;
+ s->config[1] = 0x0000;
+ onenand_intr_update(s);
+ qemu_irq_raise(s->rdy);
+ s->status = 0x0000;
+ s->intstatus = cold ? 0x8080 : 0x8010;
+ s->unladdr[0] = 0;
+ s->unladdr[1] = 0;
+ s->wpstatus = 0x0002;
+ s->cycle = 0;
+ s->otpmode = 0;
+ s->bdrv_cur = s->bdrv;
+ s->current = s->image;
+ s->secs_cur = s->secs;
+
+ if (cold) {
+ /* Lock the whole flash */
+ memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks);
+
+ if (s->bdrv_cur && bdrv_read(s->bdrv_cur, 0, s->boot[0], 8) < 0) {
+ hw_error("%s: Loading the BootRAM failed.\n", __func__);
+ }
+ }
+}
+
+static void onenand_system_reset(DeviceState *dev)
+{
+ onenand_reset(FROM_SYSBUS(OneNANDState, SYS_BUS_DEVICE(dev)), 1);
+}
+
+static inline int onenand_load_main(OneNANDState *s, int sec, int secn,
+ void *dest)
+{
+ if (s->bdrv_cur)
+ return bdrv_read(s->bdrv_cur, sec, dest, secn) < 0;
+ else if (sec + secn > s->secs_cur)
+ return 1;
+
+ memcpy(dest, s->current + (sec << 9), secn << 9);
+
+ return 0;
+}
+
+static inline int onenand_prog_main(OneNANDState *s, int sec, int secn,
+ void *src)
+{
+ int result = 0;
+
+ if (secn > 0) {
+ uint32_t size = (uint32_t)secn * 512;
+ const uint8_t *sp = (const uint8_t *)src;
+ uint8_t *dp = 0;
+ if (s->bdrv_cur) {
+ dp = g_malloc(size);
+ if (!dp || bdrv_read(s->bdrv_cur, sec, dp, secn) < 0) {
+ result = 1;
+ }
+ } else {
+ if (sec + secn > s->secs_cur) {
+ result = 1;
+ } else {
+ dp = (uint8_t *)s->current + (sec << 9);
+ }
+ }
+ if (!result) {
+ uint32_t i;
+ for (i = 0; i < size; i++) {
+ dp[i] &= sp[i];
+ }
+ if (s->bdrv_cur) {
+ result = bdrv_write(s->bdrv_cur, sec, dp, secn) < 0;
+ }
+ }
+ if (dp && s->bdrv_cur) {
+ g_free(dp);
+ }
+ }
+
+ return result;
+}
+
+static inline int onenand_load_spare(OneNANDState *s, int sec, int secn,
+ void *dest)
+{
+ uint8_t buf[512];
+
+ if (s->bdrv_cur) {
+ if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)
+ return 1;
+ memcpy(dest, buf + ((sec & 31) << 4), secn << 4);
+ } else if (sec + secn > s->secs_cur)
+ return 1;
+ else
+ memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4);
+
+ return 0;
+}
+
+static inline int onenand_prog_spare(OneNANDState *s, int sec, int secn,
+ void *src)
+{
+ int result = 0;
+ if (secn > 0) {
+ const uint8_t *sp = (const uint8_t *)src;
+ uint8_t *dp = 0, *dpp = 0;
+ if (s->bdrv_cur) {
+ dp = g_malloc(512);
+ if (!dp || bdrv_read(s->bdrv_cur,
+ s->secs_cur + (sec >> 5),
+ dp, 1) < 0) {
+ result = 1;
+ } else {
+ dpp = dp + ((sec & 31) << 4);
+ }
+ } else {
+ if (sec + secn > s->secs_cur) {
+ result = 1;
+ } else {
+ dpp = s->current + (s->secs_cur << 9) + (sec << 4);
+ }
+ }
+ if (!result) {
+ uint32_t i;
+ for (i = 0; i < (secn << 4); i++) {
+ dpp[i] &= sp[i];
+ }
+ if (s->bdrv_cur) {
+ result = bdrv_write(s->bdrv_cur, s->secs_cur + (sec >> 5),
+ dp, 1) < 0;
+ }
+ }
+ if (dp) {
+ g_free(dp);
+ }
+ }
+ return result;
+}
+
+static inline int onenand_erase(OneNANDState *s, int sec, int num)
+{
+ uint8_t *blankbuf, *tmpbuf;
+ blankbuf = g_malloc(512);
+ if (!blankbuf) {
+ return 1;
+ }
+ tmpbuf = g_malloc(512);
+ if (!tmpbuf) {
+ g_free(blankbuf);
+ return 1;
+ }
+ memset(blankbuf, 0xff, 512);
+ for (; num > 0; num--, sec++) {
+ if (s->bdrv_cur) {
+ int erasesec = s->secs_cur + (sec >> 5);
+ if (bdrv_write(s->bdrv_cur, sec, blankbuf, 1) < 0) {
+ goto fail;
+ }
+ if (bdrv_read(s->bdrv_cur, erasesec, tmpbuf, 1) < 0) {
+ goto fail;
+ }
+ memcpy(tmpbuf + ((sec & 31) << 4), blankbuf, 1 << 4);
+ if (bdrv_write(s->bdrv_cur, erasesec, tmpbuf, 1) < 0) {
+ goto fail;
+ }
+ } else {
+ if (sec + 1 > s->secs_cur) {
+ goto fail;
+ }
+ memcpy(s->current + (sec << 9), blankbuf, 512);
+ memcpy(s->current + (s->secs_cur << 9) + (sec << 4),
+ blankbuf, 1 << 4);
+ }
+ }
+
+ g_free(tmpbuf);
+ g_free(blankbuf);
+ return 0;
+
+fail:
+ g_free(tmpbuf);
+ g_free(blankbuf);
+ return 1;
+}
+
+static void onenand_command(OneNANDState *s)
+{
+ int b;
+ int sec;
+ void *buf;
+#define SETADDR(block, page) \
+ sec = (s->addr[page] & 3) + \
+ ((((s->addr[page] >> 2) & 0x3f) + \
+ (((s->addr[block] & 0xfff) | \
+ (s->addr[block] >> 15 ? \
+ s->density_mask : 0)) << 6)) << (PAGE_SHIFT - 9));
+#define SETBUF_M() \
+ buf = (s->bufaddr & 8) ? \
+ s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0]; \
+ buf += (s->bufaddr & 3) << 9;
+#define SETBUF_S() \
+ buf = (s->bufaddr & 8) ? \
+ s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1]; \
+ buf += (s->bufaddr & 3) << 4;
+
+ switch (s->command) {
+ case 0x00: /* Load single/multiple sector data unit into buffer */
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+ SETBUF_M()
+ if (onenand_load_main(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
+
+#if 0
+ SETBUF_S()
+ if (onenand_load_spare(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
+#endif
+
+ /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+ * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+ * then we need two split the read/write into two chunks.
+ */
+ s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
+ break;
+ case 0x13: /* Load single/multiple spare sector into buffer */
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+ SETBUF_S()
+ if (onenand_load_spare(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
+
+ /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+ * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+ * then we need two split the read/write into two chunks.
+ */
+ s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
+ break;
+ case 0x80: /* Program single/multiple sector data unit from buffer */
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+ SETBUF_M()
+ if (onenand_prog_main(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+#if 0
+ SETBUF_S()
+ if (onenand_prog_spare(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+#endif
+
+ /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+ * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+ * then we need two split the read/write into two chunks.
+ */
+ s->intstatus |= ONEN_INT | ONEN_INT_PROG;
+ break;
+ case 0x1a: /* Program single/multiple spare area sector from buffer */
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+ SETBUF_S()
+ if (onenand_prog_spare(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+ /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+ * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+ * then we need two split the read/write into two chunks.
+ */
+ s->intstatus |= ONEN_INT | ONEN_INT_PROG;
+ break;
+ case 0x1b: /* Copy-back program */
+ SETBUF_S()
+
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+ if (onenand_load_main(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+ SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE)
+ if (onenand_prog_main(s, sec, s->count, buf))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+ /* TODO: spare areas */
+
+ s->intstatus |= ONEN_INT | ONEN_INT_PROG;
+ break;
+
+ case 0x23: /* Unlock NAND array block(s) */
+ s->intstatus |= ONEN_INT;
+
+ /* XXX the previous (?) area should be locked automatically */
+ for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
+ if (b >= s->blocks) {
+ s->status |= ONEN_ERR_CMD;
+ break;
+ }
+ if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
+ break;
+
+ s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
+ }
+ break;
+ case 0x27: /* Unlock All NAND array blocks */
+ s->intstatus |= ONEN_INT;
+
+ for (b = 0; b < s->blocks; b ++) {
+ if (b >= s->blocks) {
+ s->status |= ONEN_ERR_CMD;
+ break;
+ }
+ if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
+ break;
+
+ s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
+ }
+ break;
+
+ case 0x2a: /* Lock NAND array block(s) */
+ s->intstatus |= ONEN_INT;
+
+ for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
+ if (b >= s->blocks) {
+ s->status |= ONEN_ERR_CMD;
+ break;
+ }
+ if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
+ break;
+
+ s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED;
+ }
+ break;
+ case 0x2c: /* Lock-tight NAND array block(s) */
+ s->intstatus |= ONEN_INT;
+
+ for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
+ if (b >= s->blocks) {
+ s->status |= ONEN_ERR_CMD;
+ break;
+ }
+ if (s->blockwp[b] == ONEN_LOCK_UNLOCKED)
+ continue;
+
+ s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN;
+ }
+ break;
+
+ case 0x71: /* Erase-Verify-Read */
+ s->intstatus |= ONEN_INT;
+ break;
+ case 0x95: /* Multi-block erase */
+ qemu_irq_pulse(s->intr);
+ /* Fall through. */
+ case 0x94: /* Block erase */
+ sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) |
+ (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0))
+ << (BLOCK_SHIFT - 9);
+ if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9)))
+ s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE;
+
+ s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
+ break;
+ case 0xb0: /* Erase suspend */
+ break;
+ case 0x30: /* Erase resume */
+ s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
+ break;
+
+ case 0xf0: /* Reset NAND Flash core */
+ onenand_reset(s, 0);
+ break;
+ case 0xf3: /* Reset OneNAND */
+ onenand_reset(s, 0);
+ break;
+
+ case 0x65: /* OTP Access */
+ s->intstatus |= ONEN_INT;
+ s->bdrv_cur = NULL;
+ s->current = s->otp;
+ s->secs_cur = 1 << (BLOCK_SHIFT - 9);
+ s->addr[ONEN_BUF_BLOCK] = 0;
+ s->otpmode = 1;
+ break;
+
+ default:
+ s->status |= ONEN_ERR_CMD;
+ s->intstatus |= ONEN_INT;
+ fprintf(stderr, "%s: unknown OneNAND command %x\n",
+ __func__, s->command);
+ }
+
+ onenand_intr_update(s);
+}
+
+static uint64_t onenand_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ OneNANDState *s = (OneNANDState *) opaque;
+ int offset = addr >> s->shift;
+
+ switch (offset) {
+ case 0x0000 ... 0xc000:
+ return lduw_le_p(s->boot[0] + addr);
+
+ case 0xf000: /* Manufacturer ID */
+ return s->id.man;
+ case 0xf001: /* Device ID */
+ return s->id.dev;
+ case 0xf002: /* Version ID */
+ return s->id.ver;
+ /* TODO: get the following values from a real chip! */
+ case 0xf003: /* Data Buffer size */
+ return 1 << PAGE_SHIFT;
+ case 0xf004: /* Boot Buffer size */
+ return 0x200;
+ case 0xf005: /* Amount of buffers */
+ return 1 | (2 << 8);
+ case 0xf006: /* Technology */
+ return 0;
+
+ case 0xf100 ... 0xf107: /* Start addresses */
+ return s->addr[offset - 0xf100];
+
+ case 0xf200: /* Start buffer */
+ return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10)));
+
+ case 0xf220: /* Command */
+ return s->command;
+ case 0xf221: /* System Configuration 1 */
+ return s->config[0] & 0xffe0;
+ case 0xf222: /* System Configuration 2 */
+ return s->config[1];
+
+ case 0xf240: /* Controller Status */
+ return s->status;
+ case 0xf241: /* Interrupt */
+ return s->intstatus;
+ case 0xf24c: /* Unlock Start Block Address */
+ return s->unladdr[0];
+ case 0xf24d: /* Unlock End Block Address */
+ return s->unladdr[1];
+ case 0xf24e: /* Write Protection Status */
+ return s->wpstatus;
+
+ case 0xff00: /* ECC Status */
+ return 0x00;
+ case 0xff01: /* ECC Result of main area data */
+ case 0xff02: /* ECC Result of spare area data */
+ case 0xff03: /* ECC Result of main area data */
+ case 0xff04: /* ECC Result of spare area data */
+ hw_error("%s: imeplement ECC\n", __FUNCTION__);
+ return 0x0000;
+ }
+
+ fprintf(stderr, "%s: unknown OneNAND register %x\n",
+ __FUNCTION__, offset);
+ return 0;
+}
+
+static void onenand_write(void *opaque, hwaddr addr,
+ uint64_t value, unsigned size)
+{
+ OneNANDState *s = (OneNANDState *) opaque;
+ int offset = addr >> s->shift;
+ int sec;
+
+ switch (offset) {
+ case 0x0000 ... 0x01ff:
+ case 0x8000 ... 0x800f:
+ if (s->cycle) {
+ s->cycle = 0;
+
+ if (value == 0x0000) {
+ SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+ onenand_load_main(s, sec,
+ 1 << (PAGE_SHIFT - 9), s->data[0][0]);
+ s->addr[ONEN_BUF_PAGE] += 4;
+ s->addr[ONEN_BUF_PAGE] &= 0xff;
+ }
+ break;
+ }
+
+ switch (value) {
+ case 0x00f0: /* Reset OneNAND */
+ onenand_reset(s, 0);
+ break;
+
+ case 0x00e0: /* Load Data into Buffer */
+ s->cycle = 1;
+ break;
+
+ case 0x0090: /* Read Identification Data */
+ memset(s->boot[0], 0, 3 << s->shift);
+ s->boot[0][0 << s->shift] = s->id.man & 0xff;
+ s->boot[0][1 << s->shift] = s->id.dev & 0xff;
+ s->boot[0][2 << s->shift] = s->wpstatus & 0xff;
+ break;
+
+ default:
+ fprintf(stderr, "%s: unknown OneNAND boot command %"PRIx64"\n",
+ __FUNCTION__, value);
+ }
+ break;
+
+ case 0xf100 ... 0xf107: /* Start addresses */
+ s->addr[offset - 0xf100] = value;
+ break;
+
+ case 0xf200: /* Start buffer */
+ s->bufaddr = (value >> 8) & 0xf;
+ if (PAGE_SHIFT == 11)
+ s->count = (value & 3) ?: 4;
+ else if (PAGE_SHIFT == 10)
+ s->count = (value & 1) ?: 2;
+ break;
+
+ case 0xf220: /* Command */
+ if (s->intstatus & (1 << 15))
+ break;
+ s->command = value;
+ onenand_command(s);
+ break;
+ case 0xf221: /* System Configuration 1 */
+ s->config[0] = value;
+ onenand_intr_update(s);
+ qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1);
+ break;
+ case 0xf222: /* System Configuration 2 */
+ s->config[1] = value;
+ break;
+
+ case 0xf241: /* Interrupt */
+ s->intstatus &= value;
+ if ((1 << 15) & ~s->intstatus)
+ s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE |
+ ONEN_ERR_PROG | ONEN_ERR_LOAD);
+ onenand_intr_update(s);
+ break;
+ case 0xf24c: /* Unlock Start Block Address */
+ s->unladdr[0] = value & (s->blocks - 1);
+ /* For some reason we have to set the end address to by default
+ * be same as start because the software forgets to write anything
+ * in there. */
+ s->unladdr[1] = value & (s->blocks - 1);
+ break;
+ case 0xf24d: /* Unlock End Block Address */
+ s->unladdr[1] = value & (s->blocks - 1);
+ break;
+
+ default:
+ fprintf(stderr, "%s: unknown OneNAND register %x\n",
+ __FUNCTION__, offset);
+ }
+}
+
+static const MemoryRegionOps onenand_ops = {
+ .read = onenand_read,
+ .write = onenand_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int onenand_initfn(SysBusDevice *dev)
+{
+ OneNANDState *s = (OneNANDState *)dev;
+ uint32_t size = 1 << (24 + ((s->id.dev >> 4) & 7));
+ void *ram;
+ s->base = (hwaddr)-1;
+ s->rdy = NULL;
+ s->blocks = size >> BLOCK_SHIFT;
+ s->secs = size >> 9;
+ s->blockwp = g_malloc(s->blocks);
+ s->density_mask = (s->id.dev & 0x08)
+ ? (1 << (6 + ((s->id.dev >> 4) & 7))) : 0;
+ memory_region_init_io(&s->iomem, &onenand_ops, s, "onenand",
+ 0x10000 << s->shift);
+ if (!s->bdrv) {
+ s->image = memset(g_malloc(size + (size >> 5)),
+ 0xff, size + (size >> 5));
+ } else {
+ if (bdrv_is_read_only(s->bdrv)) {
+ error_report("Can't use a read-only drive");
+ return -1;
+ }
+ s->bdrv_cur = s->bdrv;
+ }
+ s->otp = memset(g_malloc((64 + 2) << PAGE_SHIFT),
+ 0xff, (64 + 2) << PAGE_SHIFT);
+ memory_region_init_ram(&s->ram, "onenand.ram", 0xc000 << s->shift);
+ vmstate_register_ram_global(&s->ram);
+ ram = memory_region_get_ram_ptr(&s->ram);
+ s->boot[0] = ram + (0x0000 << s->shift);
+ s->boot[1] = ram + (0x8000 << s->shift);
+ s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);
+ s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);
+ s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);
+ s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);
+ onenand_mem_setup(s);
+ sysbus_init_irq(dev, &s->intr);
+ sysbus_init_mmio(dev, &s->container);
+ vmstate_register(&dev->qdev,
+ ((s->shift & 0x7f) << 24)
+ | ((s->id.man & 0xff) << 16)
+ | ((s->id.dev & 0xff) << 8)
+ | (s->id.ver & 0xff),
+ &vmstate_onenand, s);
+ return 0;
+}
+
+static Property onenand_properties[] = {
+ DEFINE_PROP_UINT16("manufacturer_id", OneNANDState, id.man, 0),
+ DEFINE_PROP_UINT16("device_id", OneNANDState, id.dev, 0),
+ DEFINE_PROP_UINT16("version_id", OneNANDState, id.ver, 0),
+ DEFINE_PROP_INT32("shift", OneNANDState, shift, 0),
+ DEFINE_PROP_DRIVE("drive", OneNANDState, bdrv),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void onenand_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = onenand_initfn;
+ dc->reset = onenand_system_reset;
+ dc->props = onenand_properties;
+}
+
+static const TypeInfo onenand_info = {
+ .name = "onenand",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(OneNANDState),
+ .class_init = onenand_class_init,
+};
+
+static void onenand_register_types(void)
+{
+ type_register_static(&onenand_info);
+}
+
+void *onenand_raw_otp(DeviceState *onenand_device)
+{
+ return FROM_SYSBUS(OneNANDState, SYS_BUS_DEVICE(onenand_device))->otp;
+}
+
+type_init(onenand_register_types)
--- /dev/null
+/*
+ * QEMU PC System Firmware
+ *
+ * Copyright (c) 2003-2004 Fabrice Bellard
+ * Copyright (c) 2011-2012 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "sysemu/blockdev.h"
+#include "qemu/error-report.h"
+#include "hw/sysbus.h"
+#include "hw/hw.h"
+#include "hw/i386/pc.h"
+#include "hw/boards.h"
+#include "hw/loader.h"
+#include "sysemu/sysemu.h"
+#include "hw/block/flash.h"
+#include "sysemu/kvm.h"
+
+#define BIOS_FILENAME "bios.bin"
+
+typedef struct PcSysFwDevice {
+ SysBusDevice busdev;
+ uint8_t rom_only;
+} PcSysFwDevice;
+
+static void pc_isa_bios_init(MemoryRegion *rom_memory,
+ MemoryRegion *flash_mem,
+ int ram_size)
+{
+ int isa_bios_size;
+ MemoryRegion *isa_bios;
+ uint64_t flash_size;
+ void *flash_ptr, *isa_bios_ptr;
+
+ flash_size = memory_region_size(flash_mem);
+
+ /* map the last 128KB of the BIOS in ISA space */
+ isa_bios_size = flash_size;
+ if (isa_bios_size > (128 * 1024)) {
+ isa_bios_size = 128 * 1024;
+ }
+ isa_bios = g_malloc(sizeof(*isa_bios));
+ memory_region_init_ram(isa_bios, "isa-bios", isa_bios_size);
+ vmstate_register_ram_global(isa_bios);
+ memory_region_add_subregion_overlap(rom_memory,
+ 0x100000 - isa_bios_size,
+ isa_bios,
+ 1);
+
+ /* copy ISA rom image from top of flash memory */
+ flash_ptr = memory_region_get_ram_ptr(flash_mem);
+ isa_bios_ptr = memory_region_get_ram_ptr(isa_bios);
+ memcpy(isa_bios_ptr,
+ ((uint8_t*)flash_ptr) + (flash_size - isa_bios_size),
+ isa_bios_size);
+
+ memory_region_set_readonly(isa_bios, true);
+}
+
+static void pc_fw_add_pflash_drv(void)
+{
+ QemuOpts *opts;
+ QEMUMachine *machine;
+ char *filename;
+
+ if (bios_name == NULL) {
+ bios_name = BIOS_FILENAME;
+ }
+ filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+ if (!filename) {
+ error_report("Can't open BIOS image %s", bios_name);
+ exit(1);
+ }
+
+ opts = drive_add(IF_PFLASH, -1, filename, "readonly=on");
+
+ g_free(filename);
+
+ if (opts == NULL) {
+ return;
+ }
+
+ machine = find_default_machine();
+ if (machine == NULL) {
+ return;
+ }
+
+ if (!drive_init(opts, machine->block_default_type)) {
+ qemu_opts_del(opts);
+ }
+}
+
+static void pc_system_flash_init(MemoryRegion *rom_memory,
+ DriveInfo *pflash_drv)
+{
+ BlockDriverState *bdrv;
+ int64_t size;
+ hwaddr phys_addr;
+ int sector_bits, sector_size;
+ pflash_t *system_flash;
+ MemoryRegion *flash_mem;
+
+ bdrv = pflash_drv->bdrv;
+ size = bdrv_getlength(pflash_drv->bdrv);
+ sector_bits = 12;
+ sector_size = 1 << sector_bits;
+
+ if ((size % sector_size) != 0) {
+ fprintf(stderr,
+ "qemu: PC system firmware (pflash) must be a multiple of 0x%x\n",
+ sector_size);
+ exit(1);
+ }
+
+ phys_addr = 0x100000000ULL - size;
+ system_flash = pflash_cfi01_register(phys_addr, NULL, "system.flash", size,
+ bdrv, sector_size, size >> sector_bits,
+ 1, 0x0000, 0x0000, 0x0000, 0x0000, 0);
+ flash_mem = pflash_cfi01_get_memory(system_flash);
+
+ pc_isa_bios_init(rom_memory, flash_mem, size);
+}
+
+static void old_pc_system_rom_init(MemoryRegion *rom_memory)
+{
+ char *filename;
+ MemoryRegion *bios, *isa_bios;
+ int bios_size, isa_bios_size;
+ int ret;
+
+ /* BIOS load */
+ if (bios_name == NULL) {
+ bios_name = BIOS_FILENAME;
+ }
+ filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
+ if (filename) {
+ bios_size = get_image_size(filename);
+ } else {
+ bios_size = -1;
+ }
+ if (bios_size <= 0 ||
+ (bios_size % 65536) != 0) {
+ goto bios_error;
+ }
+ bios = g_malloc(sizeof(*bios));
+ memory_region_init_ram(bios, "pc.bios", bios_size);
+ vmstate_register_ram_global(bios);
+ memory_region_set_readonly(bios, true);
+ ret = rom_add_file_fixed(bios_name, (uint32_t)(-bios_size), -1);
+ if (ret != 0) {
+ bios_error:
+ fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", bios_name);
+ exit(1);
+ }
+ if (filename) {
+ g_free(filename);
+ }
+
+ /* map the last 128KB of the BIOS in ISA space */
+ isa_bios_size = bios_size;
+ if (isa_bios_size > (128 * 1024)) {
+ isa_bios_size = 128 * 1024;
+ }
+ isa_bios = g_malloc(sizeof(*isa_bios));
+ memory_region_init_alias(isa_bios, "isa-bios", bios,
+ bios_size - isa_bios_size, isa_bios_size);
+ memory_region_add_subregion_overlap(rom_memory,
+ 0x100000 - isa_bios_size,
+ isa_bios,
+ 1);
+ memory_region_set_readonly(isa_bios, true);
+
+ /* map all the bios at the top of memory */
+ memory_region_add_subregion(rom_memory,
+ (uint32_t)(-bios_size),
+ bios);
+}
+
+void pc_system_firmware_init(MemoryRegion *rom_memory)
+{
+ DriveInfo *pflash_drv;
+ PcSysFwDevice *sysfw_dev;
+
+ sysfw_dev = (PcSysFwDevice*) qdev_create(NULL, "pc-sysfw");
+
+ qdev_init_nofail(DEVICE(sysfw_dev));
+
+ if (sysfw_dev->rom_only) {
+ old_pc_system_rom_init(rom_memory);
+ return;
+ }
+
+ pflash_drv = drive_get(IF_PFLASH, 0, 0);
+
+ /* Currently KVM cannot execute from device memory.
+ Use old rom based firmware initialization for KVM. */
+ if (kvm_enabled()) {
+ if (pflash_drv != NULL) {
+ fprintf(stderr, "qemu: pflash cannot be used with kvm enabled\n");
+ exit(1);
+ } else {
+ sysfw_dev->rom_only = 1;
+ old_pc_system_rom_init(rom_memory);
+ return;
+ }
+ }
+
+ /* If a pflash drive is not found, then create one using
+ the bios filename. */
+ if (pflash_drv == NULL) {
+ pc_fw_add_pflash_drv();
+ pflash_drv = drive_get(IF_PFLASH, 0, 0);
+ }
+
+ if (pflash_drv != NULL) {
+ pc_system_flash_init(rom_memory, pflash_drv);
+ } else {
+ fprintf(stderr, "qemu: PC system firmware (pflash) not available\n");
+ exit(1);
+ }
+}
+
+static Property pcsysfw_properties[] = {
+ DEFINE_PROP_UINT8("rom_only", PcSysFwDevice, rom_only, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static int pcsysfw_init(DeviceState *dev)
+{
+ return 0;
+}
+
+static void pcsysfw_class_init (ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS (klass);
+
+ dc->desc = "PC System Firmware";
+ dc->init = pcsysfw_init;
+ dc->props = pcsysfw_properties;
+}
+
+static const TypeInfo pcsysfw_info = {
+ .name = "pc-sysfw",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof (PcSysFwDevice),
+ .class_init = pcsysfw_class_init,
+};
+
+static void pcsysfw_register (void)
+{
+ type_register_static (&pcsysfw_info);
+}
+
+type_init (pcsysfw_register);
+
--- /dev/null
+#include "hw/hw.h"
+#include "hw/sh4/sh.h"
+#include "hw/loader.h"
+
+#define CE1 0x0100
+#define CE2 0x0200
+#define RE 0x0400
+#define WE 0x0800
+#define ALE 0x1000
+#define CLE 0x2000
+#define RDY1 0x4000
+#define RDY2 0x8000
+#define RDY(n) ((n) == 0 ? RDY1 : RDY2)
+
+typedef enum { WAIT, READ1, READ2, READ3 } state_t;
+
+typedef struct {
+ uint8_t *flash_contents;
+ state_t state;
+ uint32_t address;
+ uint8_t address_cycle;
+} tc58128_dev;
+
+static tc58128_dev tc58128_devs[2];
+
+#define FLASH_SIZE (16*1024*1024)
+
+static void init_dev(tc58128_dev * dev, const char *filename)
+{
+ int ret, blocks;
+
+ dev->state = WAIT;
+ dev->flash_contents = g_malloc(FLASH_SIZE);
+ memset(dev->flash_contents, 0xff, FLASH_SIZE);
+ if (filename) {
+ /* Load flash image skipping the first block */
+ ret = load_image(filename, dev->flash_contents + 528 * 32);
+ if (ret < 0) {
+ fprintf(stderr, "ret=%d\n", ret);
+ fprintf(stderr, "qemu: could not load flash image %s\n",
+ filename);
+ exit(1);
+ } else {
+ /* Build first block with number of blocks */
+ blocks = (ret + 528 * 32 - 1) / (528 * 32);
+ dev->flash_contents[0] = blocks & 0xff;
+ dev->flash_contents[1] = (blocks >> 8) & 0xff;
+ dev->flash_contents[2] = (blocks >> 16) & 0xff;
+ dev->flash_contents[3] = (blocks >> 24) & 0xff;
+ fprintf(stderr, "loaded %d bytes for %s into flash\n", ret,
+ filename);
+ }
+ }
+}
+
+static void handle_command(tc58128_dev * dev, uint8_t command)
+{
+ switch (command) {
+ case 0xff:
+ fprintf(stderr, "reset flash device\n");
+ dev->state = WAIT;
+ break;
+ case 0x00:
+ fprintf(stderr, "read mode 1\n");
+ dev->state = READ1;
+ dev->address_cycle = 0;
+ break;
+ case 0x01:
+ fprintf(stderr, "read mode 2\n");
+ dev->state = READ2;
+ dev->address_cycle = 0;
+ break;
+ case 0x50:
+ fprintf(stderr, "read mode 3\n");
+ dev->state = READ3;
+ dev->address_cycle = 0;
+ break;
+ default:
+ fprintf(stderr, "unknown flash command 0x%02x\n", command);
+ abort();
+ }
+}
+
+static void handle_address(tc58128_dev * dev, uint8_t data)
+{
+ switch (dev->state) {
+ case READ1:
+ case READ2:
+ case READ3:
+ switch (dev->address_cycle) {
+ case 0:
+ dev->address = data;
+ if (dev->state == READ2)
+ dev->address |= 0x100;
+ else if (dev->state == READ3)
+ dev->address |= 0x200;
+ break;
+ case 1:
+ dev->address += data * 528 * 0x100;
+ break;
+ case 2:
+ dev->address += data * 528;
+ fprintf(stderr, "address pointer in flash: 0x%08x\n",
+ dev->address);
+ break;
+ default:
+ /* Invalid data */
+ abort();
+ }
+ dev->address_cycle++;
+ break;
+ default:
+ abort();
+ }
+}
+
+static uint8_t handle_read(tc58128_dev * dev)
+{
+#if 0
+ if (dev->address % 0x100000 == 0)
+ fprintf(stderr, "reading flash at address 0x%08x\n", dev->address);
+#endif
+ return dev->flash_contents[dev->address++];
+}
+
+/* We never mark the device as busy, so interrupts cannot be triggered
+ XXXXX */
+
+static int tc58128_cb(uint16_t porta, uint16_t portb,
+ uint16_t * periph_pdtra, uint16_t * periph_portadir,
+ uint16_t * periph_pdtrb, uint16_t * periph_portbdir)
+{
+ int dev;
+
+ if ((porta & CE1) == 0)
+ dev = 0;
+ else if ((porta & CE2) == 0)
+ dev = 1;
+ else
+ return 0; /* No device selected */
+
+ if ((porta & RE) && (porta & WE)) {
+ /* Nothing to do, assert ready and return to input state */
+ *periph_portadir &= 0xff00;
+ *periph_portadir |= RDY(dev);
+ *periph_pdtra |= RDY(dev);
+ return 1;
+ }
+
+ if (porta & CLE) {
+ /* Command */
+ assert((porta & WE) == 0);
+ handle_command(&tc58128_devs[dev], porta & 0x00ff);
+ } else if (porta & ALE) {
+ assert((porta & WE) == 0);
+ handle_address(&tc58128_devs[dev], porta & 0x00ff);
+ } else if ((porta & RE) == 0) {
+ *periph_portadir |= 0x00ff;
+ *periph_pdtra &= 0xff00;
+ *periph_pdtra |= handle_read(&tc58128_devs[dev]);
+ } else {
+ abort();
+ }
+ return 1;
+}
+
+static sh7750_io_device tc58128 = {
+ RE | WE, /* Port A triggers */
+ 0, /* Port B triggers */
+ tc58128_cb /* Callback */
+};
+
+int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2)
+{
+ init_dev(&tc58128_devs[0], zone1);
+ init_dev(&tc58128_devs[1], zone2);
+ return sh7750_register_io_device(s, &tc58128);
+}
obj-y += sga.o ioapic_common.o ioapic.o piix_pci.o
obj-y += vmport.o
obj-y += debugcon.o debugexit.o
-obj-y += pc_sysfw.o
obj-y += lpc_ich9.o q35.o
obj-$(CONFIG_XEN) += xen_platform.o xen_apic.o
obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o
+++ /dev/null
-/*
- * OneNAND flash memories emulation.
- *
- * Copyright (C) 2008 Nokia Corporation
- * Written by Andrzej Zaborowski <andrew@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 or
- * (at your option) version 3 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "qemu-common.h"
-#include "hw/hw.h"
-#include "hw/block/flash.h"
-#include "hw/irq.h"
-#include "sysemu/blockdev.h"
-#include "exec/memory.h"
-#include "exec/address-spaces.h"
-#include "hw/sysbus.h"
-#include "qemu/error-report.h"
-
-/* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */
-#define PAGE_SHIFT 11
-
-/* Fixed */
-#define BLOCK_SHIFT (PAGE_SHIFT + 6)
-
-typedef struct {
- SysBusDevice busdev;
- struct {
- uint16_t man;
- uint16_t dev;
- uint16_t ver;
- } id;
- int shift;
- hwaddr base;
- qemu_irq intr;
- qemu_irq rdy;
- BlockDriverState *bdrv;
- BlockDriverState *bdrv_cur;
- uint8_t *image;
- uint8_t *otp;
- uint8_t *current;
- MemoryRegion ram;
- MemoryRegion mapped_ram;
- uint8_t current_direction;
- uint8_t *boot[2];
- uint8_t *data[2][2];
- MemoryRegion iomem;
- MemoryRegion container;
- int cycle;
- int otpmode;
-
- uint16_t addr[8];
- uint16_t unladdr[8];
- int bufaddr;
- int count;
- uint16_t command;
- uint16_t config[2];
- uint16_t status;
- uint16_t intstatus;
- uint16_t wpstatus;
-
- ECCState ecc;
-
- int density_mask;
- int secs;
- int secs_cur;
- int blocks;
- uint8_t *blockwp;
-} OneNANDState;
-
-enum {
- ONEN_BUF_BLOCK = 0,
- ONEN_BUF_BLOCK2 = 1,
- ONEN_BUF_DEST_BLOCK = 2,
- ONEN_BUF_DEST_PAGE = 3,
- ONEN_BUF_PAGE = 7,
-};
-
-enum {
- ONEN_ERR_CMD = 1 << 10,
- ONEN_ERR_ERASE = 1 << 11,
- ONEN_ERR_PROG = 1 << 12,
- ONEN_ERR_LOAD = 1 << 13,
-};
-
-enum {
- ONEN_INT_RESET = 1 << 4,
- ONEN_INT_ERASE = 1 << 5,
- ONEN_INT_PROG = 1 << 6,
- ONEN_INT_LOAD = 1 << 7,
- ONEN_INT = 1 << 15,
-};
-
-enum {
- ONEN_LOCK_LOCKTIGHTEN = 1 << 0,
- ONEN_LOCK_LOCKED = 1 << 1,
- ONEN_LOCK_UNLOCKED = 1 << 2,
-};
-
-static void onenand_mem_setup(OneNANDState *s)
-{
- /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
- * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
- * write boot commands. Also take note of the BWPS bit. */
- memory_region_init(&s->container, "onenand", 0x10000 << s->shift);
- memory_region_add_subregion(&s->container, 0, &s->iomem);
- memory_region_init_alias(&s->mapped_ram, "onenand-mapped-ram",
- &s->ram, 0x0200 << s->shift,
- 0xbe00 << s->shift);
- memory_region_add_subregion_overlap(&s->container,
- 0x0200 << s->shift,
- &s->mapped_ram,
- 1);
-}
-
-static void onenand_intr_update(OneNANDState *s)
-{
- qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1);
-}
-
-static void onenand_pre_save(void *opaque)
-{
- OneNANDState *s = opaque;
- if (s->current == s->otp) {
- s->current_direction = 1;
- } else if (s->current == s->image) {
- s->current_direction = 2;
- } else {
- s->current_direction = 0;
- }
-}
-
-static int onenand_post_load(void *opaque, int version_id)
-{
- OneNANDState *s = opaque;
- switch (s->current_direction) {
- case 0:
- break;
- case 1:
- s->current = s->otp;
- break;
- case 2:
- s->current = s->image;
- break;
- default:
- return -1;
- }
- onenand_intr_update(s);
- return 0;
-}
-
-static const VMStateDescription vmstate_onenand = {
- .name = "onenand",
- .version_id = 1,
- .minimum_version_id = 1,
- .minimum_version_id_old = 1,
- .pre_save = onenand_pre_save,
- .post_load = onenand_post_load,
- .fields = (VMStateField[]) {
- VMSTATE_UINT8(current_direction, OneNANDState),
- VMSTATE_INT32(cycle, OneNANDState),
- VMSTATE_INT32(otpmode, OneNANDState),
- VMSTATE_UINT16_ARRAY(addr, OneNANDState, 8),
- VMSTATE_UINT16_ARRAY(unladdr, OneNANDState, 8),
- VMSTATE_INT32(bufaddr, OneNANDState),
- VMSTATE_INT32(count, OneNANDState),
- VMSTATE_UINT16(command, OneNANDState),
- VMSTATE_UINT16_ARRAY(config, OneNANDState, 2),
- VMSTATE_UINT16(status, OneNANDState),
- VMSTATE_UINT16(intstatus, OneNANDState),
- VMSTATE_UINT16(wpstatus, OneNANDState),
- VMSTATE_INT32(secs_cur, OneNANDState),
- VMSTATE_PARTIAL_VBUFFER(blockwp, OneNANDState, blocks),
- VMSTATE_UINT8(ecc.cp, OneNANDState),
- VMSTATE_UINT16_ARRAY(ecc.lp, OneNANDState, 2),
- VMSTATE_UINT16(ecc.count, OneNANDState),
- VMSTATE_BUFFER_POINTER_UNSAFE(otp, OneNANDState, 0,
- ((64 + 2) << PAGE_SHIFT)),
- VMSTATE_END_OF_LIST()
- }
-};
-
-/* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */
-static void onenand_reset(OneNANDState *s, int cold)
-{
- memset(&s->addr, 0, sizeof(s->addr));
- s->command = 0;
- s->count = 1;
- s->bufaddr = 0;
- s->config[0] = 0x40c0;
- s->config[1] = 0x0000;
- onenand_intr_update(s);
- qemu_irq_raise(s->rdy);
- s->status = 0x0000;
- s->intstatus = cold ? 0x8080 : 0x8010;
- s->unladdr[0] = 0;
- s->unladdr[1] = 0;
- s->wpstatus = 0x0002;
- s->cycle = 0;
- s->otpmode = 0;
- s->bdrv_cur = s->bdrv;
- s->current = s->image;
- s->secs_cur = s->secs;
-
- if (cold) {
- /* Lock the whole flash */
- memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks);
-
- if (s->bdrv_cur && bdrv_read(s->bdrv_cur, 0, s->boot[0], 8) < 0) {
- hw_error("%s: Loading the BootRAM failed.\n", __func__);
- }
- }
-}
-
-static void onenand_system_reset(DeviceState *dev)
-{
- onenand_reset(FROM_SYSBUS(OneNANDState, SYS_BUS_DEVICE(dev)), 1);
-}
-
-static inline int onenand_load_main(OneNANDState *s, int sec, int secn,
- void *dest)
-{
- if (s->bdrv_cur)
- return bdrv_read(s->bdrv_cur, sec, dest, secn) < 0;
- else if (sec + secn > s->secs_cur)
- return 1;
-
- memcpy(dest, s->current + (sec << 9), secn << 9);
-
- return 0;
-}
-
-static inline int onenand_prog_main(OneNANDState *s, int sec, int secn,
- void *src)
-{
- int result = 0;
-
- if (secn > 0) {
- uint32_t size = (uint32_t)secn * 512;
- const uint8_t *sp = (const uint8_t *)src;
- uint8_t *dp = 0;
- if (s->bdrv_cur) {
- dp = g_malloc(size);
- if (!dp || bdrv_read(s->bdrv_cur, sec, dp, secn) < 0) {
- result = 1;
- }
- } else {
- if (sec + secn > s->secs_cur) {
- result = 1;
- } else {
- dp = (uint8_t *)s->current + (sec << 9);
- }
- }
- if (!result) {
- uint32_t i;
- for (i = 0; i < size; i++) {
- dp[i] &= sp[i];
- }
- if (s->bdrv_cur) {
- result = bdrv_write(s->bdrv_cur, sec, dp, secn) < 0;
- }
- }
- if (dp && s->bdrv_cur) {
- g_free(dp);
- }
- }
-
- return result;
-}
-
-static inline int onenand_load_spare(OneNANDState *s, int sec, int secn,
- void *dest)
-{
- uint8_t buf[512];
-
- if (s->bdrv_cur) {
- if (bdrv_read(s->bdrv_cur, s->secs_cur + (sec >> 5), buf, 1) < 0)
- return 1;
- memcpy(dest, buf + ((sec & 31) << 4), secn << 4);
- } else if (sec + secn > s->secs_cur)
- return 1;
- else
- memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4);
-
- return 0;
-}
-
-static inline int onenand_prog_spare(OneNANDState *s, int sec, int secn,
- void *src)
-{
- int result = 0;
- if (secn > 0) {
- const uint8_t *sp = (const uint8_t *)src;
- uint8_t *dp = 0, *dpp = 0;
- if (s->bdrv_cur) {
- dp = g_malloc(512);
- if (!dp || bdrv_read(s->bdrv_cur,
- s->secs_cur + (sec >> 5),
- dp, 1) < 0) {
- result = 1;
- } else {
- dpp = dp + ((sec & 31) << 4);
- }
- } else {
- if (sec + secn > s->secs_cur) {
- result = 1;
- } else {
- dpp = s->current + (s->secs_cur << 9) + (sec << 4);
- }
- }
- if (!result) {
- uint32_t i;
- for (i = 0; i < (secn << 4); i++) {
- dpp[i] &= sp[i];
- }
- if (s->bdrv_cur) {
- result = bdrv_write(s->bdrv_cur, s->secs_cur + (sec >> 5),
- dp, 1) < 0;
- }
- }
- if (dp) {
- g_free(dp);
- }
- }
- return result;
-}
-
-static inline int onenand_erase(OneNANDState *s, int sec, int num)
-{
- uint8_t *blankbuf, *tmpbuf;
- blankbuf = g_malloc(512);
- if (!blankbuf) {
- return 1;
- }
- tmpbuf = g_malloc(512);
- if (!tmpbuf) {
- g_free(blankbuf);
- return 1;
- }
- memset(blankbuf, 0xff, 512);
- for (; num > 0; num--, sec++) {
- if (s->bdrv_cur) {
- int erasesec = s->secs_cur + (sec >> 5);
- if (bdrv_write(s->bdrv_cur, sec, blankbuf, 1) < 0) {
- goto fail;
- }
- if (bdrv_read(s->bdrv_cur, erasesec, tmpbuf, 1) < 0) {
- goto fail;
- }
- memcpy(tmpbuf + ((sec & 31) << 4), blankbuf, 1 << 4);
- if (bdrv_write(s->bdrv_cur, erasesec, tmpbuf, 1) < 0) {
- goto fail;
- }
- } else {
- if (sec + 1 > s->secs_cur) {
- goto fail;
- }
- memcpy(s->current + (sec << 9), blankbuf, 512);
- memcpy(s->current + (s->secs_cur << 9) + (sec << 4),
- blankbuf, 1 << 4);
- }
- }
-
- g_free(tmpbuf);
- g_free(blankbuf);
- return 0;
-
-fail:
- g_free(tmpbuf);
- g_free(blankbuf);
- return 1;
-}
-
-static void onenand_command(OneNANDState *s)
-{
- int b;
- int sec;
- void *buf;
-#define SETADDR(block, page) \
- sec = (s->addr[page] & 3) + \
- ((((s->addr[page] >> 2) & 0x3f) + \
- (((s->addr[block] & 0xfff) | \
- (s->addr[block] >> 15 ? \
- s->density_mask : 0)) << 6)) << (PAGE_SHIFT - 9));
-#define SETBUF_M() \
- buf = (s->bufaddr & 8) ? \
- s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0]; \
- buf += (s->bufaddr & 3) << 9;
-#define SETBUF_S() \
- buf = (s->bufaddr & 8) ? \
- s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1]; \
- buf += (s->bufaddr & 3) << 4;
-
- switch (s->command) {
- case 0x00: /* Load single/multiple sector data unit into buffer */
- SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
-
- SETBUF_M()
- if (onenand_load_main(s, sec, s->count, buf))
- s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
-
-#if 0
- SETBUF_S()
- if (onenand_load_spare(s, sec, s->count, buf))
- s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
-#endif
-
- /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
- * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
- * then we need two split the read/write into two chunks.
- */
- s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
- break;
- case 0x13: /* Load single/multiple spare sector into buffer */
- SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
-
- SETBUF_S()
- if (onenand_load_spare(s, sec, s->count, buf))
- s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
-
- /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
- * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
- * then we need two split the read/write into two chunks.
- */
- s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
- break;
- case 0x80: /* Program single/multiple sector data unit from buffer */
- SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
-
- SETBUF_M()
- if (onenand_prog_main(s, sec, s->count, buf))
- s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
-
-#if 0
- SETBUF_S()
- if (onenand_prog_spare(s, sec, s->count, buf))
- s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
-#endif
-
- /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
- * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
- * then we need two split the read/write into two chunks.
- */
- s->intstatus |= ONEN_INT | ONEN_INT_PROG;
- break;
- case 0x1a: /* Program single/multiple spare area sector from buffer */
- SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
-
- SETBUF_S()
- if (onenand_prog_spare(s, sec, s->count, buf))
- s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
-
- /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
- * or if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
- * then we need two split the read/write into two chunks.
- */
- s->intstatus |= ONEN_INT | ONEN_INT_PROG;
- break;
- case 0x1b: /* Copy-back program */
- SETBUF_S()
-
- SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
- if (onenand_load_main(s, sec, s->count, buf))
- s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
-
- SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE)
- if (onenand_prog_main(s, sec, s->count, buf))
- s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
-
- /* TODO: spare areas */
-
- s->intstatus |= ONEN_INT | ONEN_INT_PROG;
- break;
-
- case 0x23: /* Unlock NAND array block(s) */
- s->intstatus |= ONEN_INT;
-
- /* XXX the previous (?) area should be locked automatically */
- for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
- if (b >= s->blocks) {
- s->status |= ONEN_ERR_CMD;
- break;
- }
- if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
- break;
-
- s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
- }
- break;
- case 0x27: /* Unlock All NAND array blocks */
- s->intstatus |= ONEN_INT;
-
- for (b = 0; b < s->blocks; b ++) {
- if (b >= s->blocks) {
- s->status |= ONEN_ERR_CMD;
- break;
- }
- if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
- break;
-
- s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
- }
- break;
-
- case 0x2a: /* Lock NAND array block(s) */
- s->intstatus |= ONEN_INT;
-
- for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
- if (b >= s->blocks) {
- s->status |= ONEN_ERR_CMD;
- break;
- }
- if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
- break;
-
- s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED;
- }
- break;
- case 0x2c: /* Lock-tight NAND array block(s) */
- s->intstatus |= ONEN_INT;
-
- for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
- if (b >= s->blocks) {
- s->status |= ONEN_ERR_CMD;
- break;
- }
- if (s->blockwp[b] == ONEN_LOCK_UNLOCKED)
- continue;
-
- s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN;
- }
- break;
-
- case 0x71: /* Erase-Verify-Read */
- s->intstatus |= ONEN_INT;
- break;
- case 0x95: /* Multi-block erase */
- qemu_irq_pulse(s->intr);
- /* Fall through. */
- case 0x94: /* Block erase */
- sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) |
- (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0))
- << (BLOCK_SHIFT - 9);
- if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9)))
- s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE;
-
- s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
- break;
- case 0xb0: /* Erase suspend */
- break;
- case 0x30: /* Erase resume */
- s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
- break;
-
- case 0xf0: /* Reset NAND Flash core */
- onenand_reset(s, 0);
- break;
- case 0xf3: /* Reset OneNAND */
- onenand_reset(s, 0);
- break;
-
- case 0x65: /* OTP Access */
- s->intstatus |= ONEN_INT;
- s->bdrv_cur = NULL;
- s->current = s->otp;
- s->secs_cur = 1 << (BLOCK_SHIFT - 9);
- s->addr[ONEN_BUF_BLOCK] = 0;
- s->otpmode = 1;
- break;
-
- default:
- s->status |= ONEN_ERR_CMD;
- s->intstatus |= ONEN_INT;
- fprintf(stderr, "%s: unknown OneNAND command %x\n",
- __func__, s->command);
- }
-
- onenand_intr_update(s);
-}
-
-static uint64_t onenand_read(void *opaque, hwaddr addr,
- unsigned size)
-{
- OneNANDState *s = (OneNANDState *) opaque;
- int offset = addr >> s->shift;
-
- switch (offset) {
- case 0x0000 ... 0xc000:
- return lduw_le_p(s->boot[0] + addr);
-
- case 0xf000: /* Manufacturer ID */
- return s->id.man;
- case 0xf001: /* Device ID */
- return s->id.dev;
- case 0xf002: /* Version ID */
- return s->id.ver;
- /* TODO: get the following values from a real chip! */
- case 0xf003: /* Data Buffer size */
- return 1 << PAGE_SHIFT;
- case 0xf004: /* Boot Buffer size */
- return 0x200;
- case 0xf005: /* Amount of buffers */
- return 1 | (2 << 8);
- case 0xf006: /* Technology */
- return 0;
-
- case 0xf100 ... 0xf107: /* Start addresses */
- return s->addr[offset - 0xf100];
-
- case 0xf200: /* Start buffer */
- return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10)));
-
- case 0xf220: /* Command */
- return s->command;
- case 0xf221: /* System Configuration 1 */
- return s->config[0] & 0xffe0;
- case 0xf222: /* System Configuration 2 */
- return s->config[1];
-
- case 0xf240: /* Controller Status */
- return s->status;
- case 0xf241: /* Interrupt */
- return s->intstatus;
- case 0xf24c: /* Unlock Start Block Address */
- return s->unladdr[0];
- case 0xf24d: /* Unlock End Block Address */
- return s->unladdr[1];
- case 0xf24e: /* Write Protection Status */
- return s->wpstatus;
-
- case 0xff00: /* ECC Status */
- return 0x00;
- case 0xff01: /* ECC Result of main area data */
- case 0xff02: /* ECC Result of spare area data */
- case 0xff03: /* ECC Result of main area data */
- case 0xff04: /* ECC Result of spare area data */
- hw_error("%s: imeplement ECC\n", __FUNCTION__);
- return 0x0000;
- }
-
- fprintf(stderr, "%s: unknown OneNAND register %x\n",
- __FUNCTION__, offset);
- return 0;
-}
-
-static void onenand_write(void *opaque, hwaddr addr,
- uint64_t value, unsigned size)
-{
- OneNANDState *s = (OneNANDState *) opaque;
- int offset = addr >> s->shift;
- int sec;
-
- switch (offset) {
- case 0x0000 ... 0x01ff:
- case 0x8000 ... 0x800f:
- if (s->cycle) {
- s->cycle = 0;
-
- if (value == 0x0000) {
- SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
- onenand_load_main(s, sec,
- 1 << (PAGE_SHIFT - 9), s->data[0][0]);
- s->addr[ONEN_BUF_PAGE] += 4;
- s->addr[ONEN_BUF_PAGE] &= 0xff;
- }
- break;
- }
-
- switch (value) {
- case 0x00f0: /* Reset OneNAND */
- onenand_reset(s, 0);
- break;
-
- case 0x00e0: /* Load Data into Buffer */
- s->cycle = 1;
- break;
-
- case 0x0090: /* Read Identification Data */
- memset(s->boot[0], 0, 3 << s->shift);
- s->boot[0][0 << s->shift] = s->id.man & 0xff;
- s->boot[0][1 << s->shift] = s->id.dev & 0xff;
- s->boot[0][2 << s->shift] = s->wpstatus & 0xff;
- break;
-
- default:
- fprintf(stderr, "%s: unknown OneNAND boot command %"PRIx64"\n",
- __FUNCTION__, value);
- }
- break;
-
- case 0xf100 ... 0xf107: /* Start addresses */
- s->addr[offset - 0xf100] = value;
- break;
-
- case 0xf200: /* Start buffer */
- s->bufaddr = (value >> 8) & 0xf;
- if (PAGE_SHIFT == 11)
- s->count = (value & 3) ?: 4;
- else if (PAGE_SHIFT == 10)
- s->count = (value & 1) ?: 2;
- break;
-
- case 0xf220: /* Command */
- if (s->intstatus & (1 << 15))
- break;
- s->command = value;
- onenand_command(s);
- break;
- case 0xf221: /* System Configuration 1 */
- s->config[0] = value;
- onenand_intr_update(s);
- qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1);
- break;
- case 0xf222: /* System Configuration 2 */
- s->config[1] = value;
- break;
-
- case 0xf241: /* Interrupt */
- s->intstatus &= value;
- if ((1 << 15) & ~s->intstatus)
- s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE |
- ONEN_ERR_PROG | ONEN_ERR_LOAD);
- onenand_intr_update(s);
- break;
- case 0xf24c: /* Unlock Start Block Address */
- s->unladdr[0] = value & (s->blocks - 1);
- /* For some reason we have to set the end address to by default
- * be same as start because the software forgets to write anything
- * in there. */
- s->unladdr[1] = value & (s->blocks - 1);
- break;
- case 0xf24d: /* Unlock End Block Address */
- s->unladdr[1] = value & (s->blocks - 1);
- break;
-
- default:
- fprintf(stderr, "%s: unknown OneNAND register %x\n",
- __FUNCTION__, offset);
- }
-}
-
-static const MemoryRegionOps onenand_ops = {
- .read = onenand_read,
- .write = onenand_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static int onenand_initfn(SysBusDevice *dev)
-{
- OneNANDState *s = (OneNANDState *)dev;
- uint32_t size = 1 << (24 + ((s->id.dev >> 4) & 7));
- void *ram;
- s->base = (hwaddr)-1;
- s->rdy = NULL;
- s->blocks = size >> BLOCK_SHIFT;
- s->secs = size >> 9;
- s->blockwp = g_malloc(s->blocks);
- s->density_mask = (s->id.dev & 0x08)
- ? (1 << (6 + ((s->id.dev >> 4) & 7))) : 0;
- memory_region_init_io(&s->iomem, &onenand_ops, s, "onenand",
- 0x10000 << s->shift);
- if (!s->bdrv) {
- s->image = memset(g_malloc(size + (size >> 5)),
- 0xff, size + (size >> 5));
- } else {
- if (bdrv_is_read_only(s->bdrv)) {
- error_report("Can't use a read-only drive");
- return -1;
- }
- s->bdrv_cur = s->bdrv;
- }
- s->otp = memset(g_malloc((64 + 2) << PAGE_SHIFT),
- 0xff, (64 + 2) << PAGE_SHIFT);
- memory_region_init_ram(&s->ram, "onenand.ram", 0xc000 << s->shift);
- vmstate_register_ram_global(&s->ram);
- ram = memory_region_get_ram_ptr(&s->ram);
- s->boot[0] = ram + (0x0000 << s->shift);
- s->boot[1] = ram + (0x8000 << s->shift);
- s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);
- s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);
- s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);
- s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);
- onenand_mem_setup(s);
- sysbus_init_irq(dev, &s->intr);
- sysbus_init_mmio(dev, &s->container);
- vmstate_register(&dev->qdev,
- ((s->shift & 0x7f) << 24)
- | ((s->id.man & 0xff) << 16)
- | ((s->id.dev & 0xff) << 8)
- | (s->id.ver & 0xff),
- &vmstate_onenand, s);
- return 0;
-}
-
-static Property onenand_properties[] = {
- DEFINE_PROP_UINT16("manufacturer_id", OneNANDState, id.man, 0),
- DEFINE_PROP_UINT16("device_id", OneNANDState, id.dev, 0),
- DEFINE_PROP_UINT16("version_id", OneNANDState, id.ver, 0),
- DEFINE_PROP_INT32("shift", OneNANDState, shift, 0),
- DEFINE_PROP_DRIVE("drive", OneNANDState, bdrv),
- DEFINE_PROP_END_OF_LIST(),
-};
-
-static void onenand_class_init(ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
- SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
- k->init = onenand_initfn;
- dc->reset = onenand_system_reset;
- dc->props = onenand_properties;
-}
-
-static const TypeInfo onenand_info = {
- .name = "onenand",
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(OneNANDState),
- .class_init = onenand_class_init,
-};
-
-static void onenand_register_types(void)
-{
- type_register_static(&onenand_info);
-}
-
-void *onenand_raw_otp(DeviceState *onenand_device)
-{
- return FROM_SYSBUS(OneNANDState, SYS_BUS_DEVICE(onenand_device))->otp;
-}
-
-type_init(onenand_register_types)
+++ /dev/null
-/*
- * QEMU PC System Firmware
- *
- * Copyright (c) 2003-2004 Fabrice Bellard
- * Copyright (c) 2011-2012 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "sysemu/blockdev.h"
-#include "qemu/error-report.h"
-#include "hw/sysbus.h"
-#include "hw/hw.h"
-#include "hw/i386/pc.h"
-#include "hw/boards.h"
-#include "hw/loader.h"
-#include "sysemu/sysemu.h"
-#include "hw/block/flash.h"
-#include "sysemu/kvm.h"
-
-#define BIOS_FILENAME "bios.bin"
-
-typedef struct PcSysFwDevice {
- SysBusDevice busdev;
- uint8_t rom_only;
-} PcSysFwDevice;
-
-static void pc_isa_bios_init(MemoryRegion *rom_memory,
- MemoryRegion *flash_mem,
- int ram_size)
-{
- int isa_bios_size;
- MemoryRegion *isa_bios;
- uint64_t flash_size;
- void *flash_ptr, *isa_bios_ptr;
-
- flash_size = memory_region_size(flash_mem);
-
- /* map the last 128KB of the BIOS in ISA space */
- isa_bios_size = flash_size;
- if (isa_bios_size > (128 * 1024)) {
- isa_bios_size = 128 * 1024;
- }
- isa_bios = g_malloc(sizeof(*isa_bios));
- memory_region_init_ram(isa_bios, "isa-bios", isa_bios_size);
- vmstate_register_ram_global(isa_bios);
- memory_region_add_subregion_overlap(rom_memory,
- 0x100000 - isa_bios_size,
- isa_bios,
- 1);
-
- /* copy ISA rom image from top of flash memory */
- flash_ptr = memory_region_get_ram_ptr(flash_mem);
- isa_bios_ptr = memory_region_get_ram_ptr(isa_bios);
- memcpy(isa_bios_ptr,
- ((uint8_t*)flash_ptr) + (flash_size - isa_bios_size),
- isa_bios_size);
-
- memory_region_set_readonly(isa_bios, true);
-}
-
-static void pc_fw_add_pflash_drv(void)
-{
- QemuOpts *opts;
- QEMUMachine *machine;
- char *filename;
-
- if (bios_name == NULL) {
- bios_name = BIOS_FILENAME;
- }
- filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
- if (!filename) {
- error_report("Can't open BIOS image %s", bios_name);
- exit(1);
- }
-
- opts = drive_add(IF_PFLASH, -1, filename, "readonly=on");
-
- g_free(filename);
-
- if (opts == NULL) {
- return;
- }
-
- machine = find_default_machine();
- if (machine == NULL) {
- return;
- }
-
- if (!drive_init(opts, machine->block_default_type)) {
- qemu_opts_del(opts);
- }
-}
-
-static void pc_system_flash_init(MemoryRegion *rom_memory,
- DriveInfo *pflash_drv)
-{
- BlockDriverState *bdrv;
- int64_t size;
- hwaddr phys_addr;
- int sector_bits, sector_size;
- pflash_t *system_flash;
- MemoryRegion *flash_mem;
-
- bdrv = pflash_drv->bdrv;
- size = bdrv_getlength(pflash_drv->bdrv);
- sector_bits = 12;
- sector_size = 1 << sector_bits;
-
- if ((size % sector_size) != 0) {
- fprintf(stderr,
- "qemu: PC system firmware (pflash) must be a multiple of 0x%x\n",
- sector_size);
- exit(1);
- }
-
- phys_addr = 0x100000000ULL - size;
- system_flash = pflash_cfi01_register(phys_addr, NULL, "system.flash", size,
- bdrv, sector_size, size >> sector_bits,
- 1, 0x0000, 0x0000, 0x0000, 0x0000, 0);
- flash_mem = pflash_cfi01_get_memory(system_flash);
-
- pc_isa_bios_init(rom_memory, flash_mem, size);
-}
-
-static void old_pc_system_rom_init(MemoryRegion *rom_memory)
-{
- char *filename;
- MemoryRegion *bios, *isa_bios;
- int bios_size, isa_bios_size;
- int ret;
-
- /* BIOS load */
- if (bios_name == NULL) {
- bios_name = BIOS_FILENAME;
- }
- filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
- if (filename) {
- bios_size = get_image_size(filename);
- } else {
- bios_size = -1;
- }
- if (bios_size <= 0 ||
- (bios_size % 65536) != 0) {
- goto bios_error;
- }
- bios = g_malloc(sizeof(*bios));
- memory_region_init_ram(bios, "pc.bios", bios_size);
- vmstate_register_ram_global(bios);
- memory_region_set_readonly(bios, true);
- ret = rom_add_file_fixed(bios_name, (uint32_t)(-bios_size), -1);
- if (ret != 0) {
- bios_error:
- fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", bios_name);
- exit(1);
- }
- if (filename) {
- g_free(filename);
- }
-
- /* map the last 128KB of the BIOS in ISA space */
- isa_bios_size = bios_size;
- if (isa_bios_size > (128 * 1024)) {
- isa_bios_size = 128 * 1024;
- }
- isa_bios = g_malloc(sizeof(*isa_bios));
- memory_region_init_alias(isa_bios, "isa-bios", bios,
- bios_size - isa_bios_size, isa_bios_size);
- memory_region_add_subregion_overlap(rom_memory,
- 0x100000 - isa_bios_size,
- isa_bios,
- 1);
- memory_region_set_readonly(isa_bios, true);
-
- /* map all the bios at the top of memory */
- memory_region_add_subregion(rom_memory,
- (uint32_t)(-bios_size),
- bios);
-}
-
-void pc_system_firmware_init(MemoryRegion *rom_memory)
-{
- DriveInfo *pflash_drv;
- PcSysFwDevice *sysfw_dev;
-
- sysfw_dev = (PcSysFwDevice*) qdev_create(NULL, "pc-sysfw");
-
- qdev_init_nofail(DEVICE(sysfw_dev));
-
- if (sysfw_dev->rom_only) {
- old_pc_system_rom_init(rom_memory);
- return;
- }
-
- pflash_drv = drive_get(IF_PFLASH, 0, 0);
-
- /* Currently KVM cannot execute from device memory.
- Use old rom based firmware initialization for KVM. */
- if (kvm_enabled()) {
- if (pflash_drv != NULL) {
- fprintf(stderr, "qemu: pflash cannot be used with kvm enabled\n");
- exit(1);
- } else {
- sysfw_dev->rom_only = 1;
- old_pc_system_rom_init(rom_memory);
- return;
- }
- }
-
- /* If a pflash drive is not found, then create one using
- the bios filename. */
- if (pflash_drv == NULL) {
- pc_fw_add_pflash_drv();
- pflash_drv = drive_get(IF_PFLASH, 0, 0);
- }
-
- if (pflash_drv != NULL) {
- pc_system_flash_init(rom_memory, pflash_drv);
- } else {
- fprintf(stderr, "qemu: PC system firmware (pflash) not available\n");
- exit(1);
- }
-}
-
-static Property pcsysfw_properties[] = {
- DEFINE_PROP_UINT8("rom_only", PcSysFwDevice, rom_only, 0),
- DEFINE_PROP_END_OF_LIST(),
-};
-
-static int pcsysfw_init(DeviceState *dev)
-{
- return 0;
-}
-
-static void pcsysfw_class_init (ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS (klass);
-
- dc->desc = "PC System Firmware";
- dc->init = pcsysfw_init;
- dc->props = pcsysfw_properties;
-}
-
-static const TypeInfo pcsysfw_info = {
- .name = "pc-sysfw",
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof (PcSysFwDevice),
- .class_init = pcsysfw_class_init,
-};
-
-static void pcsysfw_register (void)
-{
- type_register_static (&pcsysfw_info);
-}
-
-type_init (pcsysfw_register);
-
-obj-y = tc58128.o
obj-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o
obj-y := $(addprefix ../,$(obj-y))
+++ /dev/null
-#include "hw/hw.h"
-#include "hw/sh4/sh.h"
-#include "hw/loader.h"
-
-#define CE1 0x0100
-#define CE2 0x0200
-#define RE 0x0400
-#define WE 0x0800
-#define ALE 0x1000
-#define CLE 0x2000
-#define RDY1 0x4000
-#define RDY2 0x8000
-#define RDY(n) ((n) == 0 ? RDY1 : RDY2)
-
-typedef enum { WAIT, READ1, READ2, READ3 } state_t;
-
-typedef struct {
- uint8_t *flash_contents;
- state_t state;
- uint32_t address;
- uint8_t address_cycle;
-} tc58128_dev;
-
-static tc58128_dev tc58128_devs[2];
-
-#define FLASH_SIZE (16*1024*1024)
-
-static void init_dev(tc58128_dev * dev, const char *filename)
-{
- int ret, blocks;
-
- dev->state = WAIT;
- dev->flash_contents = g_malloc(FLASH_SIZE);
- memset(dev->flash_contents, 0xff, FLASH_SIZE);
- if (filename) {
- /* Load flash image skipping the first block */
- ret = load_image(filename, dev->flash_contents + 528 * 32);
- if (ret < 0) {
- fprintf(stderr, "ret=%d\n", ret);
- fprintf(stderr, "qemu: could not load flash image %s\n",
- filename);
- exit(1);
- } else {
- /* Build first block with number of blocks */
- blocks = (ret + 528 * 32 - 1) / (528 * 32);
- dev->flash_contents[0] = blocks & 0xff;
- dev->flash_contents[1] = (blocks >> 8) & 0xff;
- dev->flash_contents[2] = (blocks >> 16) & 0xff;
- dev->flash_contents[3] = (blocks >> 24) & 0xff;
- fprintf(stderr, "loaded %d bytes for %s into flash\n", ret,
- filename);
- }
- }
-}
-
-static void handle_command(tc58128_dev * dev, uint8_t command)
-{
- switch (command) {
- case 0xff:
- fprintf(stderr, "reset flash device\n");
- dev->state = WAIT;
- break;
- case 0x00:
- fprintf(stderr, "read mode 1\n");
- dev->state = READ1;
- dev->address_cycle = 0;
- break;
- case 0x01:
- fprintf(stderr, "read mode 2\n");
- dev->state = READ2;
- dev->address_cycle = 0;
- break;
- case 0x50:
- fprintf(stderr, "read mode 3\n");
- dev->state = READ3;
- dev->address_cycle = 0;
- break;
- default:
- fprintf(stderr, "unknown flash command 0x%02x\n", command);
- abort();
- }
-}
-
-static void handle_address(tc58128_dev * dev, uint8_t data)
-{
- switch (dev->state) {
- case READ1:
- case READ2:
- case READ3:
- switch (dev->address_cycle) {
- case 0:
- dev->address = data;
- if (dev->state == READ2)
- dev->address |= 0x100;
- else if (dev->state == READ3)
- dev->address |= 0x200;
- break;
- case 1:
- dev->address += data * 528 * 0x100;
- break;
- case 2:
- dev->address += data * 528;
- fprintf(stderr, "address pointer in flash: 0x%08x\n",
- dev->address);
- break;
- default:
- /* Invalid data */
- abort();
- }
- dev->address_cycle++;
- break;
- default:
- abort();
- }
-}
-
-static uint8_t handle_read(tc58128_dev * dev)
-{
-#if 0
- if (dev->address % 0x100000 == 0)
- fprintf(stderr, "reading flash at address 0x%08x\n", dev->address);
-#endif
- return dev->flash_contents[dev->address++];
-}
-
-/* We never mark the device as busy, so interrupts cannot be triggered
- XXXXX */
-
-static int tc58128_cb(uint16_t porta, uint16_t portb,
- uint16_t * periph_pdtra, uint16_t * periph_portadir,
- uint16_t * periph_pdtrb, uint16_t * periph_portbdir)
-{
- int dev;
-
- if ((porta & CE1) == 0)
- dev = 0;
- else if ((porta & CE2) == 0)
- dev = 1;
- else
- return 0; /* No device selected */
-
- if ((porta & RE) && (porta & WE)) {
- /* Nothing to do, assert ready and return to input state */
- *periph_portadir &= 0xff00;
- *periph_portadir |= RDY(dev);
- *periph_pdtra |= RDY(dev);
- return 1;
- }
-
- if (porta & CLE) {
- /* Command */
- assert((porta & WE) == 0);
- handle_command(&tc58128_devs[dev], porta & 0x00ff);
- } else if (porta & ALE) {
- assert((porta & WE) == 0);
- handle_address(&tc58128_devs[dev], porta & 0x00ff);
- } else if ((porta & RE) == 0) {
- *periph_portadir |= 0x00ff;
- *periph_pdtra &= 0xff00;
- *periph_pdtra |= handle_read(&tc58128_devs[dev]);
- } else {
- abort();
- }
- return 1;
-}
-
-static sh7750_io_device tc58128 = {
- RE | WE, /* Port A triggers */
- 0, /* Port B triggers */
- tc58128_cb /* Callback */
-};
-
-int tc58128_init(struct SH7750State *s, const char *zone1, const char *zone2)
-{
- init_dev(&tc58128_devs[0], zone1);
- init_dev(&tc58128_devs[1], zone2);
- return sh7750_register_io_device(s, &tc58128);
-}