--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PolarFire SoC (MPFS) MUSB Glue Layer
+ *
+ * Copyright (c) 2020-2022 Microchip Corporation. All rights reserved.
+ * Based on {omap2430,tusb6010,ux500}.c
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/usb_phy_generic.h>
+#include "musb_core.h"
+#include "musb_dma.h"
+
+#define MPFS_MUSB_MAX_EP_NUM 8
+#define MPFS_MUSB_RAM_BITS 12
+
+struct mpfs_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct platform_device *phy;
+ struct clk *clk;
+};
+
+static struct musb_fifo_cfg mpfs_musb_mode_cfg[] = {
+ { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, },
+ { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, },
+ { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 1024, },
+ { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 4096, },
+};
+
+static const struct musb_hdrc_config mpfs_musb_hdrc_config = {
+ .fifo_cfg = mpfs_musb_mode_cfg,
+ .fifo_cfg_size = ARRAY_SIZE(mpfs_musb_mode_cfg),
+ .multipoint = true,
+ .dyn_fifo = true,
+ .num_eps = MPFS_MUSB_MAX_EP_NUM,
+ .ram_bits = MPFS_MUSB_RAM_BITS,
+};
+
+static irqreturn_t mpfs_musb_interrupt(int irq, void *__hci)
+{
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+ struct musb *musb = __hci;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+ if (musb->int_usb || musb->int_tx || musb->int_rx) {
+ musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb);
+ musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx);
+ musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx);
+ ret = musb_interrupt(musb);
+ }
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return ret;
+}
+
+static void mpfs_musb_set_vbus(struct musb *musb, int is_on)
+{
+ u8 devctl;
+
+ /*
+ * HDRC controls CPEN, but beware current surges during device
+ * connect. They can trigger transient overcurrent conditions
+ * that must be ignored.
+ */
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+ if (is_on) {
+ musb->is_active = 1;
+ musb->xceiv->otg->default_a = 1;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ devctl |= MUSB_DEVCTL_SESSION;
+ MUSB_HST_MODE(musb);
+ } else {
+ musb->is_active = 0;
+
+ /*
+ * NOTE: skipping A_WAIT_VFALL -> A_IDLE and
+ * jumping right to B_IDLE...
+ */
+ musb->xceiv->otg->default_a = 0;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+ devctl &= ~MUSB_DEVCTL_SESSION;
+
+ MUSB_DEV_MODE(musb);
+ }
+
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+ dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
+ usb_otg_state_string(musb->xceiv->otg->state),
+ musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+
+static int mpfs_musb_init(struct musb *musb)
+{
+ struct device *dev = musb->controller;
+
+ musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+ if (IS_ERR(musb->xceiv)) {
+ dev_err(dev, "HS UDC: no transceiver configured\n");
+ return PTR_ERR(musb->xceiv);
+ }
+
+ musb->dyn_fifo = true;
+ musb->isr = mpfs_musb_interrupt;
+
+ musb_platform_set_vbus(musb, 1);
+
+ return 0;
+}
+
+static const struct musb_platform_ops mpfs_ops = {
+ .quirks = MUSB_DMA_INVENTRA,
+ .init = mpfs_musb_init,
+ .fifo_mode = 2,
+#ifdef CONFIG_USB_INVENTRA_DMA
+ .dma_init = musbhs_dma_controller_create,
+ .dma_exit = musbhs_dma_controller_destroy,
+#endif
+ .set_vbus = mpfs_musb_set_vbus
+};
+
+static int mpfs_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mpfs_glue *glue;
+ struct platform_device *musb_pdev;
+ struct device *dev = &pdev->dev;
+ struct clk *clk;
+ int ret;
+
+ glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ return -ENOMEM;
+
+ musb_pdev = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+ if (!musb_pdev) {
+ dev_err(dev, "failed to allocate musb device\n");
+ return -ENOMEM;
+ }
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err_phy_release;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err_phy_release;
+ }
+
+ musb_pdev->dev.parent = dev;
+ musb_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(39);
+ musb_pdev->dev.dma_mask = &musb_pdev->dev.coherent_dma_mask;
+ device_set_of_node_from_dev(&musb_pdev->dev, dev);
+
+ glue->dev = dev;
+ glue->musb = musb_pdev;
+ glue->clk = clk;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ goto err_clk_disable;
+
+ pdata->config = &mpfs_musb_hdrc_config;
+ pdata->platform_ops = &mpfs_ops;
+
+ pdata->mode = usb_get_dr_mode(dev);
+ if (pdata->mode == USB_DR_MODE_UNKNOWN) {
+ dev_info(dev, "No dr_mode property found, defaulting to otg\n");
+ pdata->mode = USB_DR_MODE_OTG;
+ }
+
+ glue->phy = usb_phy_generic_register();
+ if (IS_ERR(glue->phy)) {
+ dev_err(dev, "failed to register usb-phy %ld\n",
+ PTR_ERR(glue->phy));
+ goto err_clk_disable;
+ }
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources);
+ if (ret) {
+ dev_err(dev, "failed to add resources\n");
+ goto err_clk_disable;
+ }
+
+ ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(dev, "failed to add platform_data\n");
+ goto err_clk_disable;
+ }
+
+ ret = platform_device_add(musb_pdev);
+ if (ret) {
+ dev_err(dev, "failed to register musb device\n");
+ goto err_clk_disable;
+ }
+
+ dev_info(&pdev->dev, "Registered MPFS MUSB driver\n");
+ return 0;
+
+err_clk_disable:
+ clk_disable_unprepare(clk);
+
+err_phy_release:
+ usb_phy_generic_unregister(glue->phy);
+ platform_device_put(musb_pdev);
+ return ret;
+}
+
+static int mpfs_remove(struct platform_device *pdev)
+{
+ struct mpfs_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_unregister(glue->musb);
+ usb_phy_generic_unregister(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mpfs_id_table[] = {
+ { .compatible = "microchip,mpfs-musb" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mpfs_id_table);
+#endif
+
+static struct platform_driver mpfs_musb_driver = {
+ .probe = mpfs_probe,
+ .remove = mpfs_remove,
+ .driver = {
+ .name = "mpfs-musb",
+ .of_match_table = of_match_ptr(mpfs_id_table)
+ },
+};
+
+module_platform_driver(mpfs_musb_driver);
+
+MODULE_DESCRIPTION("PolarFire SoC MUSB Glue Layer");
+MODULE_LICENSE("GPL");
projects / platform / kernel / linux-starfive.git / commitdiff