u16 napi_event;
u16 intr_mask;
int phy_1000_ctrl_reg;
-#ifdef CONFIG_R8169_VLAN
- struct vlan_group *vlgrp;
-#endif
struct mdio_ops {
void (*write)(void __iomem *, int, int);
return 0;
}
-#ifdef CONFIG_R8169_VLAN
-
static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
struct sk_buff *skb)
{
TxVlanTag | swab16(vlan_tx_tag_get(skb)) : 0x00;
}
-static void rtl8169_vlan_rx_register(struct net_device *dev,
- struct vlan_group *grp)
+#define NETIF_F_HW_VLAN_TX_RX (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX)
+
+static void rtl8169_vlan_mode(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
spin_lock_irqsave(&tp->lock, flags);
- tp->vlgrp = grp;
- /*
- * Do not disable RxVlan on 8110SCd.
- */
- if (tp->vlgrp || (tp->mac_version == RTL_GIGA_MAC_VER_05))
+ if (dev->features & NETIF_F_HW_VLAN_RX)
tp->cp_cmd |= RxVlan;
else
tp->cp_cmd &= ~RxVlan;
RTL_W16(CPlusCmd, tp->cp_cmd);
+ /* PCI commit */
RTL_R16(CPlusCmd);
spin_unlock_irqrestore(&tp->lock, flags);
+
+ dev->vlan_features = dev->features &~ NETIF_F_HW_VLAN_TX_RX;
}
-static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
- struct sk_buff *skb, int polling)
+static void rtl8169_rx_vlan_tag(struct RxDesc *desc, struct sk_buff *skb)
{
u32 opts2 = le32_to_cpu(desc->opts2);
- struct vlan_group *vlgrp = tp->vlgrp;
- int ret;
- if (vlgrp && (opts2 & RxVlanTag)) {
- u16 vtag = swab16(opts2 & 0xffff);
+ if (opts2 & RxVlanTag)
+ __vlan_hwaccel_put_tag(skb, swab16(opts2 & 0xffff));
- if (likely(polling))
- vlan_gro_receive(&tp->napi, vlgrp, vtag, skb);
- else
- __vlan_hwaccel_rx(skb, vlgrp, vtag, polling);
- ret = 0;
- } else
- ret = -1;
desc->opts2 = 0;
- return ret;
-}
-
-#else /* !CONFIG_R8169_VLAN */
-
-static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
- struct sk_buff *skb)
-{
- return 0;
-}
-
-static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
- struct sk_buff *skb, int polling)
-{
- return -1;
}
-#endif
-
static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct rtl8169_private *tp = netdev_priv(dev);
}
}
+static int rtl8169_set_flags(struct net_device *dev, u32 data)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ unsigned long old_feat = dev->features;
+ int rc;
+
+ if ((tp->mac_version == RTL_GIGA_MAC_VER_05) &&
+ !(data & ETH_FLAG_RXVLAN)) {
+ netif_info(tp, drv, dev, "8110SCd requires hardware Rx VLAN\n");
+ return -EINVAL;
+ }
+
+ rc = ethtool_op_set_flags(dev, data, ETH_FLAG_TXVLAN | ETH_FLAG_RXVLAN);
+ if (rc)
+ return rc;
+
+ if ((old_feat ^ dev->features) & NETIF_F_HW_VLAN_RX)
+ rtl8169_vlan_mode(dev);
+
+ return 0;
+}
+
static const struct ethtool_ops rtl8169_ethtool_ops = {
.get_drvinfo = rtl8169_get_drvinfo,
.get_regs_len = rtl8169_get_regs_len,
.get_strings = rtl8169_get_strings,
.get_sset_count = rtl8169_get_sset_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
+ .set_flags = rtl8169_set_flags,
+ .get_flags = ethtool_op_get_flags,
};
static void rtl8169_get_mac_version(struct rtl8169_private *tp,
.ndo_set_mac_address = rtl_set_mac_address,
.ndo_do_ioctl = rtl8169_ioctl,
.ndo_set_multicast_list = rtl_set_rx_mode,
-#ifdef CONFIG_R8169_VLAN
- .ndo_vlan_rx_register = rtl8169_vlan_rx_register,
-#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = rtl8169_netpoll,
#endif
/* Identify chip attached to board */
rtl8169_get_mac_version(tp, ioaddr);
+ /*
+ * Pretend we are using VLANs; This bypasses a nasty bug where
+ * Interrupts stop flowing on high load on 8110SCd controllers.
+ */
+ if (tp->mac_version == RTL_GIGA_MAC_VER_05)
+ tp->cp_cmd |= RxVlan;
+
rtl_init_mdio_ops(tp);
rtl_init_pll_power_ops(tp);
netif_napi_add(dev, &tp->napi, rtl8169_poll, R8169_NAPI_WEIGHT);
-#ifdef CONFIG_R8169_VLAN
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-#endif
- dev->features |= NETIF_F_GRO;
+ dev->features |= NETIF_F_HW_VLAN_TX_RX | NETIF_F_GRO;
tp->intr_mask = 0xffff;
tp->hw_start = cfg->hw_start;
rtl8169_init_phy(dev, tp);
- /*
- * Pretend we are using VLANs; This bypasses a nasty bug where
- * Interrupts stop flowing on high load on 8110SCd controllers.
- */
- if (tp->mac_version == RTL_GIGA_MAC_VER_05)
- RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
+ rtl8169_vlan_mode(dev);
rtl_pll_power_up(tp);
skb_put(skb, pkt_size);
skb->protocol = eth_type_trans(skb, dev);
- if (rtl8169_rx_vlan_skb(tp, desc, skb, polling) < 0) {
- if (likely(polling))
- napi_gro_receive(&tp->napi, skb);
- else
- netif_rx(skb);
- }
+ rtl8169_rx_vlan_tag(desc, skb);
+
+ if (likely(polling))
+ napi_gro_receive(&tp->napi, skb);
+ else
+ netif_rx(skb);
dev->stats.rx_bytes += pkt_size;
dev->stats.rx_packets++;