fec: Do not assume that PHY reset is active low
authorFabio Estevam <fabio.estevam@freescale.com>
Tue, 24 Dec 2013 14:16:01 +0000 (12:16 -0200)
committerDavid S. Miller <davem@davemloft.net>
Mon, 30 Dec 2013 03:27:00 +0000 (22:27 -0500)
We should not assume that the PHY reset is always active low.

Retrieve this information from the device tree instead, so that the PHY reset
can work on both cases.

Reported-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/freescale/fec_main.c

index 50bb71c..45b8b22 100644 (file)
@@ -2049,6 +2049,8 @@ static void fec_reset_phy(struct platform_device *pdev)
        int err, phy_reset;
        int msec = 1;
        struct device_node *np = pdev->dev.of_node;
+       enum of_gpio_flags flags;
+       bool port;
 
        if (!np)
                return;
@@ -2058,18 +2060,22 @@ static void fec_reset_phy(struct platform_device *pdev)
        if (msec > 1000)
                msec = 1;
 
-       phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
+       phy_reset = of_get_named_gpio_flags(np, "phy-reset-gpios", 0, &flags);
        if (!gpio_is_valid(phy_reset))
                return;
 
-       err = devm_gpio_request_one(&pdev->dev, phy_reset,
-                                   GPIOF_OUT_INIT_LOW, "phy-reset");
+       if (flags & OF_GPIO_ACTIVE_LOW)
+               port = GPIOF_OUT_INIT_LOW;
+       else
+               port = GPIOF_OUT_INIT_HIGH;
+
+       err = devm_gpio_request_one(&pdev->dev, phy_reset, port, "phy-reset");
        if (err) {
                dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
                return;
        }
        msleep(msec);
-       gpio_set_value(phy_reset, 1);
+       gpio_set_value(phy_reset, !port);
 }
 #else /* CONFIG_OF */
 static void fec_reset_phy(struct platform_device *pdev)