/* A -*- C -*- header file for the bfd library */
-/* bfd.h -- The only header file required by users of the bfd library */
+/* bfd.h -- The only header file required by users of the bfd library
+ */
+
+/* WARNING:
+This file is generated from various .c files, if you change it, your
+bits may be lost
+*/
/* Copyright (C) 1990, 1991 Free Software Foundation, Inc.
#define WP_TEXT 0200
#define D_PAGED 0400
-/* This enum gives the object file's CPU architecture, in a global sense.
- E.g. what processor family does it belong to? There is another field,
- which indicates what processor within the family is in use. */
-enum bfd_architecture {
- bfd_arch_unknown, /* File arch not known */
- bfd_arch_obscure, /* File arch known, not one of these */
- bfd_arch_m68k, /* Motorola 68xxx */
- bfd_arch_vax, /* DEC Vax */
- bfd_arch_i960, /* Intel 960 */
-
- /* The order of the following is important.
- * A lower number indicates a machine type
- * that only accepts a subset of the
- * instructions available to machines with
- * higher numbers.
- *
- * The exception is the "ca", which is
- * incompatible with all other machines except
- * "core".
- */
-#define bfd_mach_i960_core 1
-#define bfd_mach_i960_ka_sa 2
-#define bfd_mach_i960_kb_sb 3
-#define bfd_mach_i960_mc 4
-#define bfd_mach_i960_xa 5
-#define bfd_mach_i960_ca 6
-
- bfd_arch_a29k, /* AMD 29000 */
- bfd_arch_sparc, /* Sun (SPARC International) SPARC */
- bfd_arch_mips, /* MIPS Rxxxx */
- bfd_arch_i386, /* Intel 386 */
- bfd_arch_ns32k, /* National Semiconductor 32xxx */
- bfd_arch_tahoe, /* CCI/Harris Tahoe */
- bfd_arch_i860, /* Intel 860 */
- bfd_arch_romp, /* IBM ROMP RS/6000 */
- bfd_arch_alliant, /* Alliant */
- bfd_arch_convex, /* Convex */
- bfd_arch_m88k, /* Motorola 88xxx */
- bfd_arch_pyramid, /* Pyramid Technology */
- bfd_arch_h8_300, /* Hitachi H8/300 */
- bfd_arch_last
-};
\f
/* symbols and relocation */
typedef int symtype; /* Who knows, yet? */
-/* Symbol cache classifications: (Bfd-Symbol-Flag_FOOBAR) */
-#define BSF_NO_FLAGS 0x00
-#define BSF_LOCAL 0x01 /* bfd_symclass_unknown */
-#define BSF_GLOBAL 0x02 /* bfd_symclass_global */
-#define BSF_IMPORT 0x04
-#define BSF_EXPORT 0x08
-#define BSF_UNDEFINED 0x10 /* bfd_symclass_undefined */
-#define BSF_FORT_COMM 0x20 /* bfd_symclass_fcommon */
-#define BSF_DEBUGGING 0x40 /* bfd_symclass_debugger */
-#define BSF_ABSOLUTE 0x80
-#define BSF_KEEP 0x10000
-#define BSF_WARNING 0x20000
-#define BSF_KEEP_G 0x80000
-#define BSF_WEAK 0x100000
-#define BSF_CTOR 0x200000 /* Symbol is a con/destructor */
-#define BSF_FAKE 0x400000 /* Symbol doesn't really exist */
-#define BSF_OLD_COMMON 0x800000 /* Symbol used to be common,
- but now is allocated */
-
-/* If symbol is fort_comm, then value is size, and this is the contents */
-#define BFD_FORT_COMM_DEFAULT_VALUE 0
-
-/* in some files the type of a symbol sometimes alters its location
- in an output file - ie in coff a ISFCN symbol which is also C_EXT
- symbol appears where it was declared and not at the end of a section.
- This bit is set by the target bfd part to convey this information. */
-#define BSF_NOT_AT_END 0x40000
-
/* general purpose part of a symbol;
target specific parts will be found in libcoff.h, liba.out.h etc */
-typedef struct symbol_cache_entry
-{
- struct _bfd *the_bfd; /* Just a way to find out host type */
- CONST char *name;
- symvalue value;
- flagword flags;
- struct sec *section;
- PTR udata; /* Target-specific stuff */
-} asymbol;
+
#define bfd_get_section(x) ((x)->section)
#define bfd_get_output_section(x) ((x)->section->output_section)
file_ptr file_offset; /* look here to find the file */
} carsym; /* to make these you call a carsymogen */
-/* Relocation stuff */
-
-/* Either: sym will point to a symbol and isextern will be 0, *OR*
- sym will be NULL and isextern will be a symbol type (eg N_TEXT)
- which means the location should be relocated relative to the
- segment origin. This is because we won't necessarily have a symbol
- which is guaranteed to point to the segment origin. */
-
-typedef enum bfd_reloc_status {
- bfd_reloc_ok,
- bfd_reloc_overflow,
- bfd_reloc_outofrange,
- bfd_reloc_continue,
- bfd_reloc_notsupported,
- bfd_reloc_other,
- bfd_reloc_undefined,
- bfd_reloc_dangerous}
- bfd_reloc_status_enum_type;
-
-typedef CONST struct rint
-{
- unsigned int type;
- unsigned int rightshift;
- unsigned int size;
- unsigned int bitsize;
- boolean pc_relative;
- unsigned int bitpos;
-
- boolean absolute;
- boolean complain_on_overflow;
- bfd_reloc_status_enum_type (*special_function)();
- char *name;
- boolean partial_inplace;
- /* Two mask fields,
- the src_mask is used to select what parts of the read in data are to
- be used in the relocation sum. Eg, if this was an 8 bit bit of data
- which we read and relocated, this would be 0x000000ff. When we have
- relocs which have an addend, such as sun4 extended relocs, the value
- in the offset part of a relocating field is garbage so we never use
- it. In this case the mask would be 0x00000000.
-
- The dst_mask is what parts of the instruction are replaced into the
- instruction. In most cases src_mask == dst_mask, except in the above
- special case, where dst_mask would be 0x000000ff, and src_mask would
- be 0x00000000.
- */
- bfd_word src_mask; /* What things to take from the source */
- bfd_word dst_mask; /* What things to put into the dest */
-
- /* Does a pc rel offset already have the offset of the jump from the
- beginnining of the module in place - eg on the sun3, a pcrel
- instruction always has a negative number in place, containing the
- displacement from the beginning of the module. 88k bcs has a zero
- in there, so you have to work out the offset yourself. */
- boolean pcrel_offset;
-} reloc_howto_type;
-
-#define HOWTO(CODE, RT,SIZE,BITSIZE, PCREL, BITPOS, ABS, OVERFLOW, SF, NAME, INPLACE, MASKSRC, MASKDST, PCRELDONE) \
-{(unsigned)CODE,RT,SIZE,BITSIZE, PCREL, BITPOS,ABS,OVERFLOW,SF,NAME,INPLACE,MASKSRC,MASKDST,PCRELDONE}
-
-typedef unsigned char bfd_byte;
-
-typedef struct reloc_cache_entry
-{
- /* A pointer into the canonicalized table for the symbol */
- asymbol **sym_ptr_ptr;
-
- rawdata_offset address; /* offset in section */
- bfd_vma addend; /* addend for relocation value */
- struct sec *section; /* if sym is null this is the section */
- reloc_howto_type *howto;
-
-} arelent;
-
-typedef struct relent_chain {
- arelent relent;
- struct relent_chain *next;
-} arelent_chain;
/* Used in generating armaps. Perhaps just a forward definition would do? */
struct orl { /* output ranlib */
typedef struct lineno_cache_entry {
unsigned int line_number; /* Linenumber from start of function*/
union {
- asymbol *sym; /* Function name */
+ struct symbol_cache_entry *sym; /* Function name */
unsigned long offset; /* Offset into section */
} u;
} alent;
\f
/* object and core file sections */
-/* Section flag definitions */
-#define SEC_NO_FLAGS 000
-#define SEC_ALLOC 001
-#define SEC_LOAD 002
-#define SEC_RELOC 004
-#define SEC_BALIGN 010
-#define SEC_READONLY 020
-#define SEC_CODE 040
-#define SEC_DATA 0100
-#define SEC_ROM 0200
-#define SEC_CONSTRUCTOR 0400
-#define SEC_HAS_CONTENTS (0x200)
-
-typedef struct sec
-{
- CONST char *name;
- struct sec *next;
- flagword flags;
-
- bfd_vma vma;
- bfd_size_type size;
-
- /* The output_offset is the indent into the output section of
- this section. If this is the first section to go into
- an output section, this value will be 0... */
- bfd_vma output_offset;
- struct sec *output_section;
- unsigned int alignment_power; /* eg 4 aligns to 2^4*/
-
- arelent *relocation; /* for input files */
- arelent **orelocation; /* for output files */
-
- unsigned reloc_count;
- file_ptr filepos; /* File position of section data */
- file_ptr rel_filepos; /* File position of relocation info */
- file_ptr line_filepos;
- PTR *userdata;
- struct lang_output_section *otheruserdata;
- int index; /* Which section is it 0..nth */
- alent *lineno;
- unsigned int lineno_count;
-
- /* When a section is being output, this value changes as more
- linenumbers are written out */
- file_ptr moving_line_filepos;
-
- /* what the section number is in the target world */
- unsigned int target_index;
-
- PTR used_by_bfd;
-
- /* If this is a constructor section then here is a list of relents */
- arelent_chain *constructor_chain;
-} asection;
#define align_power(addr, align) \
( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
} bfd_print_symbol_enum_type;
\f
-/* The BFD target structure.
-
- This structure is how to find out everything BFD knows about a target.
- It includes things like its byte order, name, what routines to call
- to do various operations, etc.
-
- Every BFD points to a target structure with its "xvec" member. */
-
-/* Shortcut for declaring fields which are prototyped function pointers,
- while avoiding anguish on compilers that don't support protos. */
-
-#define SDEF(ret, name, arglist) PROTO(ret,(*name),arglist)
-#define SDEF_FMT(ret, name, arglist) PROTO(ret,(*name[bfd_type_end]),arglist)
-
-/* These macros are used to dispatch to functions through the bfd_target
- vector. They are used in a number of macros further down in bfd.h,
- and are also used when calling various routines by hand inside the
- bfd implementation. The "arglist" argument must be parenthesized;
- it contains all the arguments to the called function. */
-
-#define BFD_SEND(bfd, message, arglist) ((*((bfd)->xvec->message)) arglist)
-/* For operations which index on the bfd format */
-#define BFD_SEND_FMT(bfd, message, arglist) \
- (((bfd)->xvec->message[(int)((bfd)->format)]) arglist)
-
-/* This is the struct which defines the type of BFD this is. The
- "xvec" member of the struct bfd itself points here. Each module
- that implements access to a different target under BFD, defines
- one of these. */
-
-/* FIXME, these names should be rationalised with the names of the entry points
- which call them. Too bad we can't have one macro to define them both! */
-typedef struct bfd_target
-{
- /* identifies the kind of target, eg SunOS4, Ultrix, etc */
- char *name;
-
- /* This is bogus. Anything that can be told from the "flavour"
- by some user program should be an independent attribute that can
- be queried instead. FIXME. -- gnu@cygnus.com */
- enum target_flavour_enum {
- bfd_target_aout_flavour_enum,
- bfd_target_coff_flavour_enum,
- bfd_target_ieee_flavour_enum,
- bfd_target_oasys_flavour_enum,
- bfd_target_srec_flavour_enum} flavour;
-
- boolean byteorder_big_p; /* Order of bytes in data sections */
- boolean header_byteorder_big_p; /* Order of bytes in header */
-
- flagword object_flags; /* these are the ones that may be set */
- flagword section_flags; /* ditto */
-
- char ar_pad_char; /* filenames in archives padded w/this char */
- unsigned short ar_max_namelen; /* this could be a char too! */
-
- unsigned int align_power_min; /* alignment for sections */
- /* Byte swapping for data */
- /* Note that these don't take bfd as first arg. Certain other handlers
- could do the same. */
- SDEF (bfd_64_type, bfd_getx64, (bfd_byte *));
- SDEF (void, bfd_putx64, (bfd_64_type, bfd_byte *));
- SDEF (unsigned int, bfd_getx32, (bfd_byte *));
- SDEF (void, bfd_putx32, (unsigned long, bfd_byte *));
- SDEF (unsigned int, bfd_getx16, (bfd_byte *));
- SDEF (void, bfd_putx16, (int, bfd_byte *));
-
- /* Byte swapping for headers */
- SDEF (bfd_64_type, bfd_h_getx64, (bfd_byte *));
- SDEF (void, bfd_h_putx64, (bfd_64_type, bfd_byte *));
- SDEF (unsigned int, bfd_h_getx32, (bfd_byte *));
- SDEF (void, bfd_h_putx32, (unsigned long, bfd_byte *));
- SDEF (unsigned int, bfd_h_getx16, (bfd_byte *));
- SDEF (void, bfd_h_putx16, (int, bfd_byte *));
-
- /* Format-dependent */
- /* Check the format of a file being read. Return bfd_target * or zero. */
- SDEF_FMT (struct bfd_target *, _bfd_check_format, (bfd *));
- /* Set the format of a file being written. */
- SDEF_FMT (boolean, _bfd_set_format, (bfd *));
- /* Write cached information into a file being written, at bfd_close. */
- SDEF_FMT (boolean, _bfd_write_contents, (bfd *));
-
- /* All these are defined in JUMP_TABLE */
- /* Core files */
- SDEF (char *, _core_file_failing_command, (bfd *));
- SDEF (int, _core_file_failing_signal, (bfd *));
- SDEF (boolean, _core_file_matches_executable_p, (bfd *, bfd *));
-
- /* Archives */
- SDEF (boolean, _bfd_slurp_armap, (bfd *));
- SDEF (boolean, _bfd_slurp_extended_name_table, (bfd *));
- SDEF (void, _bfd_truncate_arname, (bfd *, CONST char *, char *));
- SDEF (boolean, write_armap, (bfd *arch, unsigned int elength,
- struct orl *map, int orl_count, int
- stridx));
-
- /* All the standard stuff */
- SDEF (boolean, _close_and_cleanup, (bfd *)); /* free any allocated data */
- SDEF (boolean, _bfd_set_section_contents, (bfd *, sec_ptr, PTR,
- file_ptr, bfd_size_type));
- SDEF (boolean, _bfd_get_section_contents, (bfd *, sec_ptr, PTR,
- file_ptr, bfd_size_type));
- SDEF (boolean, _new_section_hook, (bfd *, sec_ptr));
-
- /* Symbols and relocation */
- SDEF (unsigned int, _get_symtab_upper_bound, (bfd *));
- SDEF (unsigned int, _bfd_canonicalize_symtab, (bfd *, asymbol **));
- SDEF (unsigned int, _get_reloc_upper_bound, (bfd *, sec_ptr));
- SDEF (unsigned int, _bfd_canonicalize_reloc, (bfd *, sec_ptr, arelent **,
- asymbol**));
-
- /* FIXME: For steve -- clean up later */
- SDEF (asymbol *, _bfd_make_empty_symbol, (bfd *));
- SDEF (void, _bfd_print_symbol, (bfd *, PTR, asymbol *,
- bfd_print_symbol_enum_type));
- SDEF (alent *, _get_lineno, (bfd *, asymbol *));
-
- SDEF (boolean, _bfd_set_arch_mach, (bfd *, enum bfd_architecture,
- unsigned long));
-
- SDEF (bfd *, openr_next_archived_file, (bfd *arch, bfd *prev));
- SDEF (boolean, _bfd_find_nearest_line,
- (bfd *abfd, asection *section, asymbol **symbols,bfd_vma offset,
- CONST char **file, CONST char **func, unsigned int *line));
- SDEF (int, _bfd_stat_arch_elt, (bfd *, struct stat *));
-
- SDEF (int, _bfd_sizeof_headers, (bfd *, boolean));
-
- /* Jumps for coff swapping */
-
- SDEF(void, _bfd_coff_swap_aux_in,(
- bfd *abfd ,
- PTR ext,
- int type,
- int class ,
- PTR in));
-
- SDEF(void, _bfd_coff_swap_sym_in,(
- bfd *abfd ,
- PTR ext,
- PTR in));
-
- SDEF(void, _bfd_coff_swap_lineno_in, (
- bfd *abfd,
- PTR ext,
- PTR in));
-
-} bfd_target;
\f
/* The code that implements targets can initialize a jump table with this
macro. It must name all its routines the same way (a prefix plus
CAT(NAME,_openr_next_archived_file),\
CAT(NAME,_find_nearest_line),\
CAT(NAME,_generic_stat_arch_elt),\
-CAT(NAME,_sizeof_headers)
+CAT(NAME,_sizeof_headers),\
+CAT(NAME,_bfd_debug_info_start),\
+CAT(NAME,_bfd_debug_info_end),\
+CAT(NAME,_bfd_debug_info_accumulate)
#define COFF_SWAP_TABLE coff_swap_aux_in, coff_swap_sym_in, coff_swap_lineno_in,
\f
#define bfd_get_architecture(abfd) ((abfd)->obj_arch)
#define bfd_get_machine(abfd) ((abfd)->obj_machine)
-/* Finally! The BFD struct itself. This contains the major data about
- the file, and contains pointers to the rest of the data.
- To avoid dragging too many header files into every file that
- includes bfd.h, IOSTREAM has been declared as a "char *", and MTIME
- as a "long". Their correct types, to which they are cast when used,
- are "FILE *" and "time_t". */
+#define BYTE_SIZE 1
+#define SHORT_SIZE 2
+#define LONG_SIZE 4
+
+
+
+/*THE FOLLOWING IS EXTRACTED FROM THE SOURCE */
+
+/* Opens the file supplied (using fopen) with the target supplied, it
+returns a pointer to the created bfd.
+
+If NULL is returned then an error has occured.
+Possible errors are no_memory, invalid_target or system_call error.
+*/
+PROTO(bfd*, bfd_openr, (CONST char *filename,CONST char*target));
+/* bfd_fdopenr is to bfd_fopenr much like fdopen is to fopen. It opens a bfd on
+a file already described by the @var{fd} supplied.
+
+Possible errors are no_memory, invalid_target and system_call error.
+*/
+ PROTO(bfd *, bfd_fdopenr,
+ (CONST char *filename, CONST char *target, int fd));
+/* Creates a bfd, associated with file @var{filename}, using the file
+format @var{target}, and returns a pointer to it.
+
+Possible errors are system_call_error, no_memory, invalid_target.
+*/
+PROTO(bfd *, bfd_openw, (CONST char *filename, CONST char *target));
+/* This function closes a bfd. If the bfd was open for writing, then
+pending operations are completed and the file written out and closed.
+If the created file is executable, then @code{chmod} is called to mark
+it as such.
+
+All memory attatched to the bfd's obstacks is released.
+
+@code{true} is returned if all is ok, otherwise @code{false}.
+*/
+PROTO(boolean, bfd_close,(bfd *));
+/* This routine creates a new bfd in the manner of bfd_openw, but without
+opening a file. The new bfd takes the target from the target used by
+@var{template}. The format is always set to @code{bfd_object}.
+
+*/
+PROTO(bfd *, bfd_create, (CONST char *filename, bfd *template));
+/* Return the number of bytes in the obstacks connected to the supplied
+bfd.
+*/
+PROTO(bfd_size_type,bfd_alloc_size,(bfd *abfd));
+/* This enum gives the object file's CPU
+architecture, in a global sense. E.g. what processor family does it
+belong to? There is another field, which indicates what processor
+within the family is in use. The machine gives a number which
+distingushes different versions of the architecture, containing for
+example 2 and 3 for Intel i960 KA and i960 KB, and 68020 and 68030 for
+Motorola 68020 and 68030.
+
+*/
+enum bfd_architecture
+{
+ bfd_arch_unknown, /* File arch not known */
+ bfd_arch_obscure, /* Arch known, not one of these */
+ bfd_arch_m68k, /* Motorola 68xxx */
+ bfd_arch_vax, /* DEC Vax */
+ bfd_arch_i960, /* Intel 960 */
+ /* The order of the following is important.
+ lower number indicates a machine type that
+ only accepts a subset of the instructions
+ available to machines with higher numbers.
+ The exception is the "ca", which is
+ incompatible with all other machines except
+ "core". */
+
+#define bfd_mach_i960_core 1
+#define bfd_mach_i960_ka_sa 2
+#define bfd_mach_i960_kb_sb 3
+#define bfd_mach_i960_mc 4
+#define bfd_mach_i960_xa 5
+#define bfd_mach_i960_ca 6
+
+ bfd_arch_a29k, /* AMD 29000 */
+ bfd_arch_sparc, /* SPARC */
+ bfd_arch_mips, /* MIPS Rxxxx */
+ bfd_arch_i386, /* Intel 386 */
+ bfd_arch_ns32k, /* National Semiconductor 32xxx */
+ bfd_arch_tahoe, /* CCI/Harris Tahoe */
+ bfd_arch_i860, /* Intel 860 */
+ bfd_arch_romp, /* IBM ROMP RS/6000 */
+ bfd_arch_alliant, /* Alliant */
+ bfd_arch_convex, /* Convex */
+ bfd_arch_m88k, /* Motorola 88xxx */
+ bfd_arch_pyramid, /* Pyramid Technology */
+ bfd_arch_h8_300, /* Hitachi H8/300 */
+ bfd_arch_last
+ };
+
+/* stuff
+*/
+
+/* Return a printable string representing the architecture and machine
+type. The result is only good until the next call to
+bfd_printable_arch_mach.
+*/
+PROTO(CONST char *,bfd_printable_arch_mach,
+ (enum bfd_architecture arch, unsigned long machine));
+/* Scan a string and attempt to turn it into an archive and machine type combination.
+*/
+PROTO(boolean, bfd_scan_arch_mach,
+ (CONST char *, enum bfd_architecture *, unsigned long *));
+/* This routine is used to determine whether two BFDs' architectures and machine types are
+compatible. It calculates the lowest common denominator between the
+two architectures and machine types implied by the bfds and sets the
+objects pointed at by @var{archp} and @var{machine} if non NULL.
+
+This routine returns @code{true} if the bfds are of compatible type,
+otherwise @code{false}.
+*/
+PROTO(boolean, bfd_arch_compatible,
+ (bfd *abfd,
+ bfd *bbfd,
+ enum bfd_architecture *archp,
+ unsigned long *machinep));
+/* Set atch mach
+*/
+#define bfd_set_arch_mach(abfd, arch, mach) \
+ BFD_SEND (abfd, _bfd_set_arch_mach,\
+ (abfd, arch, mach))
+
+/* These macros as used for reading and writing raw data in sections;
+each access (except for bytes) is vectored through the target format
+of the bfd and mangled accordingly. The mangling performs any
+necessary endian translations and removes alignment restrictions.
+*/
+#define bfd_put_8(abfd, val, ptr) \
+ (*((char *)ptr) = (char)val)
+#define bfd_get_8(abfd, ptr) \
+ (*((char *)ptr))
+#define bfd_put_16(abfd, val, ptr) \
+ BFD_SEND(abfd, bfd_putx16, (val,ptr))
+#define bfd_get_16(abfd, ptr) \
+ BFD_SEND(abfd, bfd_getx16, (ptr))
+#define bfd_put_32(abfd, val, ptr) \
+ BFD_SEND(abfd, bfd_putx32, (val,ptr))
+#define bfd_get_32(abfd, ptr) \
+ BFD_SEND(abfd, bfd_getx32, (ptr))
+#define bfd_put_64(abfd, val, ptr) \
+ BFD_SEND(abfd, bfd_putx64, (val, ptr))
+#define bfd_get_64(abfd, ptr) \
+ BFD_SEND(abfd, bfd_getx64, (ptr))
+
+/* These macros have the same function as their @code{bfd_get_x}
+bretherin, except that they are used for removing information for the
+header records of object files. Believe it or not, some object files
+keep their header records in big endian order, and their data in little
+endan order.
+*/
+#define bfd_h_put_8(abfd, val, ptr) \
+ (*((char *)ptr) = (char)val)
+#define bfd_h_get_8(abfd, ptr) \
+ (*((char *)ptr))
+#define bfd_h_put_16(abfd, val, ptr) \
+ BFD_SEND(abfd, bfd_h_putx16,(val,ptr))
+#define bfd_h_get_16(abfd, ptr) \
+ BFD_SEND(abfd, bfd_h_getx16,(ptr))
+#define bfd_h_put_32(abfd, val, ptr) \
+ BFD_SEND(abfd, bfd_h_putx32,(val,ptr))
+#define bfd_h_get_32(abfd, ptr) \
+ BFD_SEND(abfd, bfd_h_getx32,(ptr))
+#define bfd_h_put_64(abfd, val, ptr) \
+ BFD_SEND(abfd, bfd_h_putx64,(val, ptr))
+#define bfd_h_get_64(abfd, ptr) \
+ BFD_SEND(abfd, bfd_h_getx64,(ptr))
+
+/* The shape of a section struct:
+
+*/
+typedef struct sec {
+
+ /* The name of the section, the name isn't a copy, the pointer is
+ the same as that passed to bfd_make_section.
+ */
+ CONST char *name;
+
+ /* The next section in the list belonging to the bfd, or NULL.
+ */
+ struct sec *next;
+
+ /* The field flags contains attributes of the section. Some of these
+ flags are read in from the object file, and some are synthesized from
+ other information.
+ */
+flagword flags;
+#define SEC_NO_FLAGS 0x000
+
+ /* Tells the OS to allocate space for this section when loaded.
+ This would clear for a section containing debug information only.
+ */
+#define SEC_ALLOC 0x001
+
+ /* Tells the OS to load the section from the file when loading.
+ This would be clear for a .bss section
+ */
+#define SEC_LOAD 0x002
+
+ /* The section contains data still to be relocated, so there will be some
+ relocation information too.
+ */
+#define SEC_RELOC 0x004
+
+ /* Obsolete ?
+ */
+#define SEC_BALIGN 0x008
+
+ /* A signal to the OS that the section contains read only data.
+ */
+#define SEC_READONLY 0x010
+
+ /* The section contains code only.
+ */
+#define SEC_CODE 0x020
+
+ /* The section contains data only.
+ */
+#define SEC_DATA 0x040
+
+ /* The section will reside in ROM.
+ */
+#define SEC_ROM 0x080
+
+ /* The section contains constructor information. This section type is
+ used by the linker to create lists of constructors and destructors
+ used by @code{g++}. When a back end sees a symbol which should be used
+ in a constructor list, it creates a new section for the type of name
+ (eg @code{__CTOR_LIST__}), attatches the symbol to it and builds a
+ relocation. To build the lists of constructors, all the linker has to
+ to is catenate all the sections called @code{__CTOR_LIST__} and
+ relocte the data contained within - exactly the operations it would
+ peform on standard data.
+ */
+#define SEC_CONSTRUCTOR 0x100
+
+ /* The section has contents - a bss section could be
+ @code{SEC_ALLOC} | @code{SEC_HAS_CONTENTS}, a debug section could be
+ @code{SEC_HAS_CONTENTS}
+ */
+#define SEC_HAS_CONTENTS 0x200
+
+ /* An instruction to the linker not to output sections containing
+ this flag even if they have information which would normally be written.
+ */
+#define SEC_NEVER_LOAD 0x400
+
+ /* The base address of the section in the address space of the target.
+ */
+ bfd_vma vma;
+
+ /* The size of the section in bytes of the loaded section. This contains
+ a value even if the section has no contents (eg, the size of @code{.bss}).
+ */
+ bfd_size_type size;
+
+ /* If this section is going to be output, then this value is the
+ offset into the output section of the first byte in the input
+ section. Eg, if this was going to start at the 100th byte in the
+ output section, this value would be 100.
+ */
+ bfd_vma output_offset;
+
+ /* The output section through which to map on output.
+ */
+ struct sec *output_section;
+
+ /* The alignment requirement of the section, as an exponent - eg 3
+ aligns to 2^3 (or 8)
+ */
+ unsigned int alignment_power;
+
+ /* If an input section, a pointer to a vector of relocation records for
+ the data in this section.
+ */
+ struct reloc_cache_entry *relocation;
+
+ /* If an output section, a pointer to a vector of pointers to
+ relocation records for the data in this section.
+ */
+ struct reloc_cache_entry **orelocation;
+
+ /* The number of relocation records in one of the above
+ */
+ unsigned reloc_count;
+
+ /* Which section is it 0..nth
+ */
+ int index;
+
+ /* Information below is back end specific - and not always used or
+ updated
+
+ File position of section data
+ */
+ file_ptr filepos;
+
+ /* File position of relocation info
+ */
+ file_ptr rel_filepos;
+
+ /* File position of line data
+ */
+ file_ptr line_filepos;
+
+ /* Pointer to data for applications
+ */
+ PTR userdata;
+ struct lang_output_section *otheruserdata;
+
+ /* Attached line number information
+ */
+ alent *lineno;
+
+ /* Number of line number records
+ */
+ unsigned int lineno_count;
+
+ /* When a section is being output, this value changes as more
+ linenumbers are written out
+ */
+ file_ptr moving_line_filepos;
+
+ /* what the section number is in the target world
+ */
+ unsigned int target_index;
+ PTR used_by_bfd;
+
+ /* If this is a constructor section then here is a list of the
+ relocations created to relocate items within it.
+ */
+ struct relent_chain *constructor_chain;
+
+ /* The bfd which owns the section.
+ */
+ bfd *owner;
+} asection ;
+
+/* Runs through the provided @var{abfd} and returns the @code{asection}
+who's name matches that provided, otherwise NULL. @xref{Sections}, for more information.
+
+*/
+PROTO(asection *, bfd_get_section_by_name,
+ (bfd *abfd, CONST char *name));
+/* This function creates a new empty section called @var{name} and attatches it
+to the end of the chain of sections for @var{bfd}. An attempt to
+create a section with a name which is already in use, returns the old
+section by that name instead.
+
+Possible errors are:
+@table @code
+@item invalid_operation
+If output has already started for this bfd.
+@item no_memory
+If obstack alloc fails.
+@end table
+
+*/
+PROTO(asection *, bfd_make_section, (bfd *, CONST char *name));
+/* Attempts to set the attributes of the section named in the bfd
+supplied to the value. Returns true on success, false on error.
+Possible error returns are:
+@table @code
+@item invalid operation
+The section cannot have one or more of the attributes requested. For
+example, a .bss section in @code{a.out} may not have the
+@code{SEC_HAS_CONTENTS} field set.
+@end table
+
+*/
+PROTO(boolean, bfd_set_section_flags,
+ (bfd *, asection *, flagword));
+/* Calls the provided function @var{func} for each section attatched to
+the bfd @var{abfd}, passing @var{obj} as an argument. The function
+will be called as if by
+
+@example
+ func(abfd, the_section, obj);
+@end example
+
+
+*/
+PROTO(void, bfd_map_over_sections,
+ (bfd *abfd, void (*func)(), PTR obj));
+/* This is the prefered method for iterating over sections, an
+alternative would be to use a loop:
+
+@example
+ section *p;
+ for (p = abfd->sections; p != NULL; p = p->next)
+ func(abfd, p, ...)
+@end example*/
+
+/* Sets @var{section} to the size @var{val}. If the operation is ok, then
+@code{true} is returned, else @code{false}.
+
+Possible error returns:
+@table @code
+@item invalid_operation
+Writing has started to the bfd, so setting the size is invalid
+@end table
+
+*/
+PROTO(boolean, bfd_set_section_size,
+ (bfd *, asection *, bfd_size_type val));
+/* Sets the contents of the section @var{section} in bfd @var{abfd} to
+the data starting in memory at @var{data}. The data is written to the
+output section starting at offset @var{offset} for @var{count} bytes.
+
+Normally @code{true} is returned, else @code{false}. Possible error
+returns are:
+@table @code
+@item no_contents
+The output section does not have the @code{SEC_HAS_CONTENTS}
+attribute, so nothing can be written to it.
+@item and some more too
+@end table
+This routine is front end to the back end function @code{_bfd_set_section_contents}.
+
+*/
+PROTO(boolean, bfd_set_section_contents,
+ (bfd *abfd,
+ asection *section,
+ PTR data,
+ file_ptr offset,
+ bfd_size_type count));
+/* This function reads data from @var{section} in bfd @var{abfd} into
+memory starting at @var{location}. The data is read at an offset of
+@var{offset} from the start of the input section, and is read for
+@var{count} bytes.
+
+If the contents of a constuctor with the @code{SEC_CONSTUCTOR} flag
+set are requested, then the @var{location} is filled with zeroes.
+
+If no errors occur, @code{true} is returned, else @code{false}.
+Possible errors are:
+
+@table @code
+@item unknown yet
+@end table
+
+*/
+PROTO(boolean, bfd_get_section_contents,
+ (bfd *abfd, asection *section, PTR location,
+ file_ptr offset, bfd_size_type count));
+/* @subsection typedef asymbol
+An @code{asymbol} has the form:
+
+*/
+typedef struct symbol_cache_entry
+{
+
+ /* A pointer to the bfd which owns the symbol. This information is
+ necessary so that a back end can work out what additional (invisible to
+ the application writer) information is carried with the symbol.
+ */
+ struct _bfd *the_bfd;
+
+ /* The text of the symbol. The name is left alone, and not copied - the
+ application may not alter it.
+ */
+ CONST char *name;
+
+ /* The value of the symbol.
+ */
+ symvalue value;
+
+ /* Attributes of a symbol:
+ */
+#define BSF_NO_FLAGS 0x00
+
+ /* The symbol has local scope; @code{static} in @code{C}. The value is
+ the offset into the section of the data.
+ */
+#define BSF_LOCAL 0x01
+
+ /* The symbol has global scope; initialized data in @code{C}. The value
+ is the offset into the section of the data.
+ */
+#define BSF_GLOBAL 0x02
+
+ /* Obsolete
+ */
+#define BSF_IMPORT 0x04
+
+ /* The symbol has global scope, and is exported. The value is the offset
+ into the section of the data.
+ */
+#define BSF_EXPORT 0x08
+
+ /* The symbol is undefined. @code{extern} in @code{C}. The value has no meaning.
+ */
+#define BSF_UNDEFINED 0x10
+
+ /* The symbol is common, initialized to zero; default in @code{C}. The
+ value is the size of the object in bytes.
+ */
+#define BSF_FORT_COMM 0x20
+
+ /* A normal @code{C} symbol would be one of:
+ @code{BSF_LOCAL}, @code{BSF_FORT_COMM}, @code{BSF_UNDEFINED} or @code{BSF_EXPORT|BSD_GLOBAL}
+
+ The symbol is a debugging record. The value has an arbitary meaning.
+ */
+#define BSF_DEBUGGING 0x40
+
+ /* The symbol has no section attached, any value is the actual value and
+ is not a relative offset to a section.
+ */
+#define BSF_ABSOLUTE 0x80
+
+ /* Used by the linker
+ */
+#define BSF_KEEP 0x10000
+#define BSF_WARNING 0x20000
+#define BSF_KEEP_G 0x80000
+
+ /* Unused
+ */
+#define BSF_WEAK 0x100000
+#define BSF_CTOR 0x200000
+#define BSF_FAKE 0x400000
+
+ /* The symbol used to be a common symbol, but now it is allocated.
+ */
+#define BSF_OLD_COMMON 0x800000
+
+ /* The default value for common data.
+ */
+#define BFD_FORT_COMM_DEFAULT_VALUE 0
+
+ /* In some files the type of a symbol sometimes alters its location
+ in an output file - ie in coff a @code{ISFCN} symbol which is also @code{C_EXT}
+ symbol appears where it was declared and not at the end of a section.
+ This bit is set by the target bfd part to convey this information.
+ */
+#define BSF_NOT_AT_END 0x40000
+ flagword flags;
+
+ /* Aointer to the section to which this symbol is relative, or 0 if the
+ symbol is absolute or undefined. Note that it is not sufficient to set
+ this location to 0 to mark a symbol as absolute - the flag
+ @code{BSF_ABSOLUTE} must be set also.
+ */
+ struct sec *section;
+
+ /* Back end special data. This is being phased out in favour of making
+ this a union.
+ */
+ PTR udata;
+} asymbol;
+
+/* Returns the number of bytes required in a vector of pointers to
+@code{asymbols} for all the symbols in the supplied bfd, including a
+terminal NULL pointer. If there are no symbols in the bfd, then 0 is
+returned.
+*/
+#define get_symtab_upper_bound(abfd) \
+ BFD_SEND (abfd, _get_symtab_upper_bound, (abfd))
+
+/* Supplied a bfd and a pointer to an uninitialized vector of pointers.
+This reads in the symbols from the bfd, and fills in the table with
+pointers to the symbols, and a trailing NULL. The routine returns the
+actual number of symbol pointers not including the NULL.
+
+*/
+#define bfd_canonicalize_symtab(abfd, location) \
+ BFD_SEND (abfd, _bfd_canonicalize_symtab,\
+ (abfd, location))
+
+
+/* Provided a table of pointers to to symbols and a count, writes to the
+output bfd the symbols when closed.
+
+*/
+PROTO(boolean, bfd_set_symtab, (bfd *, asymbol **, unsigned int ));
+/* Prints the value and flags of the symbol supplied to the stream file.
+
+*/
+PROTO(void, bfd_print_symbol_vandf, (PTR file, asymbol *symbol));
+/* This function creates a new @code{asymbol} structure for the bfd, and
+returns a pointer to it.
+
+This routine is necessary, since each back end has private information
+surrounding the @code{asymbol}. Building your own @code{asymbol} and
+pointing to it will not create the private information, and will cause
+problems later on.
+*/
+#define bfd_make_empty_symbol(abfd) \
+ BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
+
+/* @section typedef bfd
+
+Pointers to bfd structs are the cornerstone of any application using
+libbfd. References though the bfd and to data in the bfd give the
+entire bfd functionality.
+
+Finally! The BFD struct itself. This contains the major data about
+the file, and contains pointers to the rest of the data.
+
+*/
struct _bfd
{
- CONST char *filename; /* could be null; filename user opened with */
- bfd_target *xvec; /* operation jump table */
- char *iostream; /* stdio FILE *, unless an archive element */
-
- boolean cacheable; /* iostream can be closed if desired */
- boolean target_defaulted; /* Target type was default, not specific,
- so we can try all the targets if needed. */
- struct _bfd *lru_prev; /* Used for file caching */
- struct _bfd *lru_next; /* Used for file caching */
- file_ptr where; /* Where the file was when closed */
+
+ /* The filename the application opened the bfd with.
+ */
+ CONST char *filename;
+
+ /* A pointer to the target jump table.
+ */
+ struct bfd_target *xvec;
+
+ /* To avoid dragging too many header files into every file that
+ includes bfd.h, IOSTREAM has been declared as a "char *", and MTIME
+ as a "long". Their correct types, to which they are cast when used,
+ are "FILE *" and "time_t".
+
+ The iostream is the result of an fopen on the filename.
+ */
+ char *iostream;
+
+ /* Is the file being cached @xref{Caching}.
+ */
+ boolean cacheable;
+
+ /* Marks whether there was a default target specified when the bfd was
+ opened. This is used to select what matching algorithm to use to chose
+ the back end.
+ */
+ boolean target_defaulted;
+
+ /* The caching routines use these to maintain an LRU list of bfds.
+ */
+ struct _bfd *lru_prev, *lru_next;
+
+ /* When a file is closed by the caching routines, it retains the state
+ here:
+ */
+ file_ptr where;
+
+ /* and here:
+ */
boolean opened_once;
- boolean mtime_set; /* Flag indicating mtime is available */
- long mtime; /* File modified time */
- int ifd; /* for output files, channel we locked. */
+ boolean mtime_set;
+
+ /* File modified time
+ */
+ long mtime;
+
+ /* For output files, channel we locked (is this used?).
+ */
+int ifd;
+
+ /* The format which belongs to the bfd.
+ */
bfd_format format;
- enum bfd_direction {no_direction = 0,
- read_direction = 1,
- write_direction = 2,
- both_direction = 3} direction;
-
- flagword flags; /* format_specific */
-
- /* Currently my_archive is tested before adding origin to anything. I
- believe that this can become always an add of origin, with origin set
- to 0 for non archive files. FIXME-soon. */
- file_ptr origin; /* for archive contents */
- boolean output_has_begun; /* cf bfd_set_section_size */
- asection *sections; /* Pointer to linked list of sections */
- unsigned int section_count; /* The number of sections */
-
- /* Some object file stuff */
- bfd_vma start_address; /* for object files only, of course */
- unsigned int symcount; /* used for input and output */
- asymbol **outsymbols; /* symtab for output bfd */
- enum bfd_architecture obj_arch; /* Architecture of object machine, eg m68k */
- unsigned long obj_machine; /* Particular machine within arch, e.g. 68010 */
-
- /* Archive stuff. strictly speaking we don't need all three bfd* vars,
- but doing so would allow recursive archives! */
- PTR arelt_data; /* needed if this came from an archive */
- struct _bfd *my_archive; /* if this is an archive element */
- struct _bfd *next; /* output chain pointer */
- struct _bfd *archive_head; /* for output archive */
- boolean has_armap; /* if an arch; has it an armap? */
-
- PTR tdata; /* target-specific storage */
- PTR usrdata; /* application-specific storage */
-
- /* Should probably be enabled here always, so that library may be changed
- to switch this on and off, while user code may remain unchanged */
-#ifdef BFD_LOCKS
- struct flock *lock;
- char *actual_name; /* for output files, name given to open() */
-#endif
- /* Where all the allocated stuff under this BFD goes */
+ /* The direction the bfd was opened with
+ */
+ enum bfd_direction {no_direction = 0,
+ read_direction = 1,
+ write_direction = 2,
+ both_direction = 3} direction;
+
+ /* Format_specific flags
+ */
+ flagword flags;
+
+ /* Currently my_archive is tested before adding origin to anything. I
+ believe that this can become always an add of origin, with origin set
+ to 0 for non archive files.
+ */
+ file_ptr origin;
+
+ /* Remember when output has begun, to stop strange things happening.
+ */
+ boolean output_has_begun;
+
+ /* Pointer to linked list of sections
+ */
+ struct sec *sections;
+
+ /* The number of sections
+ */
+ unsigned int section_count;
+
+ /* Stuff only usefull for object files:
+ The start address.
+ */
+ bfd_vma start_address;
+
+ /* Used for input and output
+ */
+ unsigned int symcount;
+
+ /* Symtab for output bfd
+ */
+ struct symbol_cache_entry **outsymbols;
+
+ /* Architecture of object machine, eg m68k
+ */
+ enum bfd_architecture obj_arch;
+
+ /* Particular machine within arch, e.g. 68010
+ */
+ unsigned long obj_machine;
+
+ /* Stuff only usefull for archives:
+ */
+ PTR arelt_data;
+ struct _bfd *my_archive;
+ struct _bfd *next;
+ struct _bfd *archive_head;
+ boolean has_armap;
+
+ /* Used by the back end to hold private data.
+ */
+ PTR tdata;
+
+ /* Used by the application to hold private data
+ */
+ PTR usrdata;
+
+ /* Where all the allocated stuff under this BFD goes
+ */
struct obstack memory;
};
-\f
-/* The various callable routines */
-PROTO (bfd_size_type, bfd_alloc_size,(bfd *abfd));
-PROTO (char *, bfd_printable_arch_mach,(enum bfd_architecture, unsigned long));
-PROTO (char *, bfd_format_string, (bfd_format format));
-
-PROTO (char**, bfd_target_list, ());
-PROTO (bfd *, bfd_openr, (CONST char *filename, CONST char *target));
-PROTO (bfd *, bfd_fdopenr,(CONST char *filename, CONST char *target, int fd));
-PROTO (bfd *, bfd_openw, (CONST char *filename, CONST char *target));
-PROTO (bfd *, bfd_create, (CONST char *filename, CONST bfd *abfd));
-PROTO (boolean, bfd_close, (bfd *abfd));
-PROTO (long, bfd_get_mtime, (bfd *abfd));
-PROTO (bfd *, bfd_openr_next_archived_file, (bfd *obfd, bfd *last_file));
-PROTO (boolean, bfd_set_archive_head, (bfd *output_archive, bfd *new_head));
-PROTO (boolean, bfd_check_format, (bfd *abfd, bfd_format format));
-PROTO (boolean, bfd_set_format, (bfd *abfd, bfd_format format));
-PROTO (char *, bfd_core_file_failing_command, (bfd *abfd));
-PROTO (int, bfd_core_file_failing_signal, (bfd *abfd));
-PROTO (boolean, core_file_matches_executable_p, (bfd *core_bfd, bfd *exec_bfd));
-PROTO (sec_ptr, bfd_get_section_by_name, (bfd *abfd, CONST char *name));
-PROTO (void, bfd_map_over_sections, (bfd *abfd, void (*operation)(),
- PTR user_storage));
-PROTO (sec_ptr, bfd_make_section, (bfd *abfd, CONST char *CONST name));
-PROTO (boolean, bfd_set_section_flags, (bfd *abfd, sec_ptr section,
- flagword flags));
-PROTO (boolean, bfd_set_file_flags, (bfd *abfd, flagword flags));
-PROTO (boolean, bfd_arch_compatible, (bfd *abfd, bfd *bbfd,
- enum bfd_architecture *res_arch,
- unsigned long *res_machine));
-
-PROTO (boolean, bfd_set_section_size, (bfd *abfd, sec_ptr ptr,
- unsigned long val));
-PROTO (boolean, bfd_get_section_contents, (bfd *abfd, sec_ptr section,
- PTR location, file_ptr offset,
- bfd_size_type count));
-PROTO (boolean, bfd_set_section_contents, (bfd *abfd, sec_ptr section,
- PTR location, file_ptr offset,
- bfd_size_type count));
-
-PROTO (unsigned long, bfd_get_next_mapent, (bfd *abfd, symindex prev,
- carsym **entry));
-PROTO (bfd *, bfd_get_elt_at_index, (bfd *abfd, int index));
-PROTO (boolean, bfd_set_symtab, (bfd *abfd, asymbol **location,
- unsigned int symcount));
-PROTO (unsigned int, get_reloc_upper_bound, (bfd *abfd, sec_ptr asect));
-PROTO (unsigned int, bfd_canonicalize_reloc, (bfd *abfd, sec_ptr asect,
- arelent **location,
- asymbol **canon));
-PROTO (void, bfd_set_reloc, (bfd *abfd, sec_ptr asect, arelent **location,
- unsigned int count));
-PROTO (boolean, bfd_set_start_address, (bfd *,bfd_vma));
-
-PROTO (void, bfd_print_symbol_vandf, (PTR, asymbol *));
-PROTO (bfd_reloc_status_enum_type, bfd_perform_relocation,
- (bfd *, arelent*, PTR, asection *, bfd*));
-
-PROTO (bfd_vma, bfd_log2, (bfd_vma));
-#define bfd_symbol_same_target(abfd, symbol) \
-( ( ((symbol)->the_bfd->xvec) == (abfd)->xvec) ? true:false)
-
-PROTO(boolean, bfd_scan_arch_mach,(CONST char *, enum bfd_architecture *,
- unsigned long *));
-
-/* For speed and simplicity, we turn calls to these interface routines
- directly into jumps through the transfer vector. */
-#define bfd_set_arch_mach(abfd, arch, mach) \
- BFD_SEND (abfd, _bfd_set_arch_mach, (abfd, arch, mach))
+/* Marks the entry point of an output bfd. Returns @code{true} on
+success, @code{false} otherwise.
+
+*/
+PROTO(boolean, bfd_set_start_address,(bfd *, bfd_vma));
+/* Return cached file modification time (e.g. as read from archive header
+for archive members, or from file system if we have been called
+before); else determine modify time, cache it, and return it.
+*;PROTO(long, bfd_get_mtime, (bfd *));
+*/
#define bfd_sizeof_headers(abfd, reloc) \
BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
+#define bfd_find_nearest_line(abfd, section, symbols, offset, filename_ptr, func, line_ptr) \
+ BFD_SEND (abfd, _bfd_find_nearest_line, (abfd, section, symbols, offset, filename_ptr, func, line_ptr))
-#define get_symtab_upper_bound(abfd) \
- BFD_SEND (abfd, _get_symtab_upper_bound, (abfd))
+#define bfd_debug_info_start(abfd) \
+ BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
-#define bfd_canonicalize_symtab(abfd, location) \
- BFD_SEND (abfd, _bfd_canonicalize_symtab, (abfd, location))
+#define bfd_debug_info_end(abfd) \
+ BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
+
+#define bfd_debug_info_accumulate(abfd, section) \
+ BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
+
+#define bfd_stat_arch_elt(abfd, stat) \
+ BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
-#define bfd_coff_swap_lineno_in(abfd, ext, in) \
- BFD_SEND(abfd, _bfd_coff_swap_lineno_in, (abfd, ext, in))
+/* What this does
+*/
+PROTO(symindex, bfd_get_next_mapent, (bfd *, symindex, carsym **));
+/* Used whilst processing archives. Sets the head of the chain of bfds
+contained in an archive to @var{new_head}. (see chapter on archives)
+*/
+PROTO(boolean, bfd_set_archive_head, (bfd *output, bfd *new_head));
+/* Initially provided a bfd containing an archive and NULL, opens a bfd
+on the first contained element and returns that. Subsequent calls to
+bfd_openr_next_archived_file should pass the archive and the previous
+return value to return a created bfd to the next contained element.
+NULL is returned when there are no more.
-#define bfd_coff_swap_sym_in(abfd, ext, in) \
- BFD_SEND(abfd, _bfd_coff_swap_sym_in,(abfd, ext, in))
+*/
+PROTO(bfd*, bfd_openr_next_archived_file,
+ (bfd *archive, bfd *previous));
+/* The relocation routine returns as a status an enumerated type:
-#define bfd_coff_swap_aux_in(abfd, ext, type, class, in) \
- BFD_SEND(abfd, _bfd_coff_swap_aux_in,(abfd, ext, type, class, in))
+*/
+typedef enum bfd_reloc_status {
-#define bfd_make_empty_symbol(abfd) \
- BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
+ /* No errors detected
+ */
+ bfd_reloc_ok,
-#define bfd_print_symbol(abfd, file, symbol, how) \
- BFD_SEND (abfd, _bfd_print_symbol, (abfd, file, symbol, how))
+ /* The relocation was performed, but there was an overflow.
+ */
+ bfd_reloc_overflow,
-#define bfd_get_lineno(abfd, symbol) \
- BFD_SEND (abfd, _get_lineno, (abfd, symbol))
+ /* The address to relocate was not within the section supplied
+ */
+ bfd_reloc_outofrange,
-#define bfd_stat_arch_elt(abfd, buf) \
- BFD_SEND (abfd, _bfd_stat_arch_elt, (abfd, buf))
+ /* Used by special functions
+ */
+ bfd_reloc_continue,
-#define bfd_find_nearest_line(abfd, section, symbols, offset, filename_ptr, func, line_ptr) \
- BFD_SEND (abfd, _bfd_find_nearest_line, \
- (abfd, section,symbols, offset, filename_ptr, func, line_ptr))
-\f
-/* Some byte-swapping i/o operations */
-#define LONGLONG_SIZE 8
-#define LONG_SIZE 4
-#define SHORT_SIZE 2
-#define BYTE_SIZE 1
+ /* Unused
+ */
+ bfd_reloc_notsupported,
+
+ /* Unsupported relocation size requested.
+ */
+ bfd_reloc_other,
+
+ /* The symbol to relocate against was undefined.
+ */
+ bfd_reloc_undefined,
+
+ /* The relocaction was performed, but may not be ok - presently generated
+ only when linking i960 coff files with i960 b.out symbols.
+ */
+ bfd_reloc_dangerous
+ }
+ bfd_reloc_status_enum_type;
+typedef struct reloc_cache_entry
+{
+
+ /* A pointer into the canonical table of pointers
+ */
+ struct symbol_cache_entry **sym_ptr_ptr;
+
+ /* offset in section
+ */
+ rawdata_offset address;
+
+ /* addend for relocation value
+ */
+ bfd_vma addend;
+
+ /* if sym is null this is the section
+ */
+ struct sec *section;
+
+ /* Pointer to how to perform the required relocation
+ */
+ struct reloc_howto_struct *howto;
+} arelent;
+
+/* The @code{reloc_howto_type} is a structure which contains all the
+information that bfd needs to know to tie up a back end's data.
+
+*/
+typedef CONST struct reloc_howto_struct
+{
-#define bfd_put_8(abfd, val, ptr) (*((char *)ptr) = (char)val)
-#define bfd_get_8(abfd, ptr) (*((char *)ptr))
+ /* The type field has mainly a documetary use - the back end can to what
+ it wants with it, though the normally the back end's external idea of
+ what a reloc number would be would be stored in this field. For
+ example, the a PC relative word relocation in a coff environment would
+ have the type 023 - because that's what the outside world calls a
+ R_PCRWORD reloc.
+ */
+ unsigned int type;
-#define bfd_put_32(abfd, val, ptr) BFD_SEND(abfd, bfd_putx32, (val,ptr))
-#define bfd_get_32(abfd, ptr) BFD_SEND(abfd, bfd_getx32, (ptr))
+ /* The value the final relocation is shifted right by. This drops
+ unwanted data from the relocation.
+ */
+ unsigned int rightshift;
-#define bfd_put_64(abfd, val, ptr) BFD_SEND(abfd, bfd_putx64, (val,ptr))
-#define bfd_get_64(abfd, ptr) BFD_SEND(abfd, bfd_getx64, (ptr))
+ /* The size of the item to be relocated - 0, is one byte, 1 is 2 bytes, 3
+ is four bytes.
+ */
+ unsigned int size;
-#define bfd_put_16(abfd, val, ptr) BFD_SEND(abfd, bfd_putx16, (val,ptr))
-#define bfd_get_16(abfd, ptr) BFD_SEND(abfd, bfd_getx16, (ptr))
+ /* Now obsolete
+ */
+ unsigned int bitsize;
-#define bfd_h_put_8(abfd, val, ptr) bfd_put_8 (abfd, val, ptr)
-#define bfd_h_get_8(abfd, ptr) bfd_get_8 (abfd, ptr)
+ /* Notes that the relocation is relative to the location in the data
+ section of the addend. The relocation function will subtract from the
+ relocation value the address of the location being relocated.
+ */
+ boolean pc_relative;
-#define bfd_h_put_32(abfd, val, ptr) BFD_SEND(abfd, bfd_h_putx32, \
- (val, (bfd_byte *) ptr))
-#define bfd_h_get_32(abfd, ptr) BFD_SEND(abfd, bfd_h_getx32, \
- ((bfd_byte *) ptr))
+ /* Now obsolete
+ */
+ unsigned int bitpos;
-#define bfd_h_put_64(abfd, val, ptr) BFD_SEND(abfd, bfd_h_putx64, \
- (val, (bfd_byte *) ptr))
-#define bfd_h_get_64(abfd, ptr) BFD_SEND(abfd, bfd_h_getx64, \
- ((bfd_byte *) ptr))
+ /* Now obsolete
+ */
+ boolean absolute;
-#define bfd_h_put_16(abfd, val, ptr) BFD_SEND(abfd, bfd_h_putx16, (val, (bfd_byte *) ptr))
-#define bfd_h_get_16(abfd, ptr) BFD_SEND(abfd, bfd_h_getx16, ((bfd_byte *) ptr))
+ /* Causes the relocation routine to return an error if overflow is
+ detected when relocating.
+ */
+ boolean complain_on_overflow;
+ /* If this field is non null, then the supplied function is called rather
+ than the normal function. This allows really strange relocation
+ methods to be accomodated (eg, i960 callj instructions).
+ */
+ bfd_reloc_status_enum_type (*special_function)();
-/* General purpose one fits all. The do { } while (0) makes a single
- statement out of it, for use in things like nested if-statements.
-
- The idea is to create your external ref as a byte array of the
- right size eg:
- char foo[4];
- then you may do things like:
- bfd_h_put_x(abfd, 1, &foo);
+ /* The textual name of the relocation type.
+ */
+ char *name;
+ /* When performing a partial link, some formats must modify the
+ relocations rather than the data - this flag signals this.
+ */
+ boolean partial_inplace;
+
+ /* The src_mask is used to select what parts of the read in data are to
+ be used in the relocation sum. Eg, if this was an 8 bit bit of data
+ which we read and relocated, this would be 0x000000ff. When we have
+ relocs which have an addend, such as sun4 extended relocs, the value
+ in the offset part of a relocating field is garbage so we never use
+ it. In this case the mask would be 0x00000000.
+ */
+ bfd_word src_mask;
+
+ /* The dst_mask is what parts of the instruction are replaced into the
+ instruction. In most cases src_mask == dst_mask, except in the above
+ special case, where dst_mask would be 0x000000ff, and src_mask would
+ be 0x00000000.
+ */
+ bfd_word dst_mask;
+
+ /* When some formats create PC relative instructions, they leave the
+ value of the pc of the place being relocated in the offset slot of the
+ instruction, so that a PC relative relocation can be made just by
+ adding in an ordinary offset (eg sun3 a.out). Some formats leave the
+ displacement part of an instruction empty (eg m88k bcs), this flag
+ signals the fact.
+ */
+ boolean pcrel_offset;
+} reloc_howto_type;
+
+/* The HOWTO define is horrible and will go away.
*/
+#define HOWTO(C, R,S,B, P, BI, ABS, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
+ {(unsigned)C,R,S,B, P, BI, ABS,O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
+typedef unsigned char bfd_byte;
-#define bfd_h_put_x(abfd, val, ptr) \
- do { \
- if (sizeof((ptr)) == 8) \
- bfd_h_put_64 (abfd, val, (ptr));\
- if (sizeof((ptr)) == 4) \
- bfd_h_put_32 (abfd, val, (ptr));\
- else if (sizeof((ptr)) == 2) \
- bfd_h_put_16 (abfd, val, (ptr));\
- else if (sizeof((ptr)) == 1) \
- bfd_h_put_8 (abfd, val, (ptr));\
- else abort(); } while (0)
+typedef struct relent_chain {
+ arelent relent;
+ struct relent_chain *next;
+} arelent_chain;
-#ifdef GNU960
+/* If an output_bfd is supplied to this function the generated image
+will be relocatable, the relocations are copied to the output file
+after they have been changed to reflect the new state of the world.
+There are two ways of reflecting the results of partial linkage in an
+output file; by modifying the output data in place, and by modifying
+the relocation record. Some native formats (eg basic a.out and basic
+coff) have no way of specifying an addend in the relocation type, so
+the addend has to go in the output data. This is no big deal since in
+these formats the output data slot will always be big enough for the
+addend. Complex reloc types with addends were invented to solve just
+this problem.
+*/
+PROTO(bfd_reloc_status_enum_type,
+ bfd_perform_relocation,
+ (bfd * abfd,
+ arelent *reloc_entry,
+ PTR data,
+ asection *input_section,
+ bfd *output_bfd));
+/* @node bfd_target
+This structure contains everything that BFD knows about a target.
+It includes things like its byte order, name, what routines to call
+to do various operations, etc.
+
+Every BFD points to a target structure with its "xvec" member.
+
+
+Shortcut for declaring fields which are prototyped function pointers,
+while avoiding anguish on compilers that don't support protos.
+*/
+#define SDEF(ret, name, arglist) \
+ PROTO(ret,(*name),arglist)
+#define SDEF_FMT(ret, name, arglist) \
+ PROTO(ret,(*name[bfd_type_end]),arglist)
-#define BFD_COFF_FORMAT bfd_target_coff_flavour_enum
-#define BFD_BOUT_FORMAT bfd_target_aout_flavour_enum
+/* These macros are used to dispatch to functions through the bfd_target
+vector. They are used in a number of macros further down in bfd.h, and
+are also used when calling various routines by hand inside the bfd
+implementation. The "arglist" argument must be parenthesized; it
+contains all the arguments to the called function.
+*/
+#define BFD_SEND(bfd, message, arglist) \
+ ((*((bfd)->xvec->message)) arglist)
-/*
- * Return nonzero iff specified bfd is for big-endian target
- */
-#define BFD_BIG_ENDIAN_FILE_P(abfd) \
- ((abfd)->xvec->header_byteorder_big_p == true)
+/* For operations which index on the bfd format
+*/
+#define BFD_SEND_FMT(bfd, message, arglist) \
+ (((bfd)->xvec->message[(int)((bfd)->format)]) arglist)
-/*
- * Return nonzero iff specified bfd is for coff target
- */
-#define BFD_COFF_FILE_P(abfd) ((abfd)->xvec->flavour == BFD_COFF_FORMAT)
+/* This is the struct which defines the type of BFD this is. The
+"xvec" member of the struct bfd itself points here. Each module
+that implements access to a different target under BFD, defines
+one of these.
-/*
- * The names of the only targets the GNU/960 release cares about
- */
-#define BFD_BIG_COFF_TARG "coff-Intel-big"
-#define BFD_LITTLE_COFF_TARG "coff-Intel-little"
-#define BFD_BIG_BOUT_TARG "b.out.big"
-#define BFD_LITTLE_BOUT_TARG "b.out.little"
+FIXME, these names should be rationalised with the names of the
+entry points which call them. Too bad we can't have one macro to
+define them both!
-extern PROTO (char *, bfd_make_targ_name,( enum target_flavour_enum format, int bigendian));
+*/
+typedef struct bfd_target
+{
-#endif /* GNU960 */
+ /* identifies the kind of target, eg SunOS4, Ultrix, etc
+ */
+ char *name;
+
+ /* The "flavour" of a back end is a general indication about the contents
+ of a file.
+ */
+ enum target_flavour_enum {
+ bfd_target_aout_flavour_enum,
+ bfd_target_coff_flavour_enum,
+ bfd_target_ieee_flavour_enum,
+ bfd_target_oasys_flavour_enum,
+ bfd_target_srec_flavour_enum} flavour;
+
+ /* The order of bytes within the data area of a file.
+ */
+ boolean byteorder_big_p;
+
+ /* The order of bytes within the header parts of a file.
+ */
+ boolean header_byteorder_big_p;
+
+ /* This is a mask of all the flags which an executable may have set -
+ from the set @code{NO_FLAGS}, @code{HAS_RELOC}, ...@code{D_PAGED}.
+ */
+ flagword object_flags;
+
+ /* This is a mask of all the flags which a section may have set - from
+ the set @code{SEC_NO_FLAGS}, @code{SEC_ALLOC}, ...@code{SET_NEVER_LOAD}.
+ */
+ flagword section_flags;
+
+ /* The pad character for filenames within an archive header.
+ */
+ char ar_pad_char;
+
+ /* The maximum number of characters in an archive header.
+ */
+ unsigned short ar_max_namelen;
+
+ /* The minimum alignment restriction for any section.
+ */
+ unsigned int align_power_min;
+
+ /* Entries for byte swapping for data. These are different to the other
+ entry points, since they don't take bfd as first arg. Certain other handlers
+ could do the same.
+ */
+ SDEF (bfd_64_type, bfd_getx64, (bfd_byte *));
+ SDEF (void, bfd_putx64, (bfd_64_type, bfd_byte *));
+ SDEF (unsigned int, bfd_getx32, (bfd_byte *));
+ SDEF (void, bfd_putx32, (unsigned long, bfd_byte *));
+ SDEF (unsigned int, bfd_getx16, (bfd_byte *));
+ SDEF (void, bfd_putx16, (int, bfd_byte *));
+
+ /* Byte swapping for the headers
+ */
+ SDEF (bfd_64_type, bfd_h_getx64, (bfd_byte *));
+ SDEF (void, bfd_h_putx64, (bfd_64_type, bfd_byte *));
+ SDEF (unsigned int, bfd_h_getx32, (bfd_byte *));
+ SDEF (void, bfd_h_putx32, (unsigned long, bfd_byte *));
+ SDEF (unsigned int, bfd_h_getx16, (bfd_byte *));
+ SDEF (void, bfd_h_putx16, (int, bfd_byte *));
+
+ /* Format dependent routines, these turn into vectors of entry points
+ within the target vector structure; one for each format to check.
+
+ Check the format of a file being read. Return bfd_target * or zero.
+ */
+ SDEF_FMT (struct bfd_target *, _bfd_check_format, (bfd *));
+
+ /* Set the format of a file being written.
+ */
+ SDEF_FMT (boolean, _bfd_set_format, (bfd *));
+
+ /* Write cached information into a file being written, at bfd_close.
+ */
+ SDEF_FMT (boolean, _bfd_write_contents, (bfd *));
+
+ /* The following functions are defined in @code{JUMP_TABLE}. The idea is
+ that the back end writer of @code{foo} names all the routines
+ @code{foo_}@var{entry_point}, @code{JUMP_TABLE} will built the entries
+ in this structure in the right order.
+
+ Core file entry points
+ */
+ SDEF (char *, _core_file_failing_command, (bfd *));
+ SDEF (int, _core_file_failing_signal, (bfd *));
+ SDEF (boolean, _core_file_matches_executable_p, (bfd *, bfd *));
+
+ /* Archive entry points
+ */
+ SDEF (boolean, _bfd_slurp_armap, (bfd *));
+ SDEF (boolean, _bfd_slurp_extended_name_table, (bfd *));
+ SDEF (void, _bfd_truncate_arname, (bfd *, CONST char *, char *));
+ SDEF (boolean, write_armap, (bfd *arch,
+ unsigned int elength,
+ struct orl *map,
+ int orl_count,
+ int stridx));
+
+ /* Standard stuff.
+ */
+ SDEF (boolean, _close_and_cleanup, (bfd *));
+ SDEF (boolean, _bfd_set_section_contents, (bfd *, sec_ptr, PTR,
+ file_ptr, bfd_size_type));
+ SDEF (boolean, _bfd_get_section_contents, (bfd *, sec_ptr, PTR,
+ file_ptr, bfd_size_type));
+ SDEF (boolean, _new_section_hook, (bfd *, sec_ptr));
+
+ /* Symbols and reloctions
+ */
+ SDEF (unsigned int, _get_symtab_upper_bound, (bfd *));
+ SDEF (unsigned int, _bfd_canonicalize_symtab,
+ (bfd *, struct symbol_cache_entry **));
+ SDEF (unsigned int, _get_reloc_upper_bound, (bfd *, sec_ptr));
+ SDEF (unsigned int, _bfd_canonicalize_reloc, (bfd *, sec_ptr, arelent **,
+ struct symbol_cache_entry**));
+ SDEF (struct symbol_cache_entry *, _bfd_make_empty_symbol, (bfd *));
+ SDEF (void, _bfd_print_symbol, (bfd *, PTR, struct symbol_cache_entry *,
+ bfd_print_symbol_enum_type));
+#define bfd_print_symbol(b,p,s,e) BFD_SEND(b, _bfd_print_symbol, (b,p,s,e))
+ SDEF (alent *, _get_lineno, (bfd *, struct symbol_cache_entry *));
+
+ SDEF (boolean, _bfd_set_arch_mach, (bfd *, enum bfd_architecture,
+ unsigned long));
+
+ SDEF (bfd *, openr_next_archived_file, (bfd *arch, bfd *prev));
+ SDEF (boolean, _bfd_find_nearest_line,
+ (bfd *abfd, struct sec *section,
+ struct symbol_cache_entry **symbols,bfd_vma offset,
+ CONST char **file, CONST char **func, unsigned int *line));
+ SDEF (int, _bfd_stat_arch_elt, (bfd *, struct stat *));
+
+ SDEF (int, _bfd_sizeof_headers, (bfd *, boolean));
+
+ SDEF (void, _bfd_debug_info_start, (bfd *));
+ SDEF (void, _bfd_debug_info_end, (bfd *));
+ SDEF (void, _bfd_debug_info_accumulate, (bfd *, struct sec *));
+
+ /* Special entry points for gdb to swap in coff symbol table parts
+ */
+ SDEF(void, _bfd_coff_swap_aux_in,(
+ bfd *abfd ,
+ PTR ext,
+ int type,
+ int class ,
+ PTR in));
+
+ SDEF(void, _bfd_coff_swap_sym_in,(
+ bfd *abfd ,
+ PTR ext,
+ PTR in));
+
+ SDEF(void, _bfd_coff_swap_lineno_in, (
+ bfd *abfd,
+ PTR ext,
+ PTR in));
+
+} bfd_target;
+
+/* Returns a pointer to the transfer vector for the object target
+named target_name. If target_name is NULL, chooses the one in the
+environment variable GNUTARGET; if that is null or not defined then
+the first entry in the target list is chosen. Passing in the
+string "default" or setting the environment variable to "default"
+will cause the first entry in the target list to be returned,
+and "target_defaulted" will be set in the bfd. This causes
+bfd_check_format to loop over all the targets to find the one
+that matches the file being read.
+*/
+PROTO(bfd_target *, bfd_find_target,(CONST char *, bfd *));
+/* This function returns a freshly malloced NULL-terminated vector of the
+names of all the valid bfd targets. Do not modify the names
+*/
+PROTO(CONST char **,bfd_target_list,());
+/* This routine is supplied a bfd and a format. It attempts to verify if
+the file attatched to the bfd is indeed compatible with the format
+specified (ie, one of @code{bfd_object}, @code{bfd_archive} or
+@code{bfd_core}).
+
+If the bfd has been set to a specific @var{target} before the call,
+only the named target and format combination will be checked. If the
+target has not been set, or has been set to @code{default} then all
+the known target backends will be interrogated to determine a match.
+
+The function returns @code{true} on success, otherwise @code{false}
+with one of the following error codes:
+@table @code
+@item
+invalid_operation
+if @code{format} is not one of @code{bfd_object}, @code{bfd_archive}
+or @code{bfd_core}.
+@item system_call_error
+if an error occured during a read - even some file mismatches can
+cause system_call_errros
+@item file_not_recognised
+none of the backends recognised the file format
+@item file_ambiguously_recognized
+more than one backend recognised the file format.
+@end table
+*/
+PROTO(boolean, bfd_check_format, (bfd *abfd, bfd_format format));
+/* This function sets the file format of the supplied bfd to the format
+requested. If the target set in the bfd does not support the format
+requested, the format is illegal or the bfd is not open for writing
+than an error occurs.
+*/
+PROTO(boolean,bfd_set_format,(bfd *, bfd_format));
+/* This function takes one argument, and enumerated type (bfd_format) and
+returns a pointer to a const string "invalid", "object", "archive",
+"core" or "unknown" depending upon the value of the enumeration.
+*/
+PROTO(CONST char *, bfd_format_string, (bfd_format));
+#endif
-#endif /* __BFD_H_SEEN__ */
projects / external / binutils.git / commitdiff