S2io: Check for register initialization completion before accesing device registers

- Making sure register initialisation is complete before proceeding further.
  The driver must wait until initialization is complete before attempting to
  access any other device registers.

Signed-off-by: Surjit Reang <surjit.reang@neterion.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 01f08d7..f25264f 100644 (file)
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -66,6 +66,7 @@ struct XENA_dev_config {
 #define ADAPTER_STATUS_RC_PRC_QUIESCENT    vBIT(0xFF,16,8)
 #define ADAPTER_STATUS_MC_DRAM_READY       s2BIT(24)
 #define ADAPTER_STATUS_MC_QUEUES_READY     s2BIT(25)
+#define ADAPTER_STATUS_RIC_RUNNING         s2BIT(26)
 #define ADAPTER_STATUS_M_PLL_LOCK          s2BIT(30)
 #define ADAPTER_STATUS_P_PLL_LOCK          s2BIT(31)
 

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index d5113dd..121cb10 100644 (file)
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -84,7 +84,7 @@
 #include "s2io.h"
 #include "s2io-regs.h"
 
-#define DRV_VERSION "2.0.26.6"
+#define DRV_VERSION "2.0.26.10"
 
 /* S2io Driver name & version. */
 static char s2io_driver_name[] = "Neterion";
@@ -1100,6 +1100,20 @@ static int init_nic(struct s2io_nic *nic)
        msleep(500);
        val64 = readq(&bar0->sw_reset);
 
+       /* Ensure that it's safe to access registers by checking
+        * RIC_RUNNING bit is reset. Check is valid only for XframeII.
+        */
+       if (nic->device_type == XFRAME_II_DEVICE) {
+               for (i = 0; i < 50; i++) {
+                       val64 = readq(&bar0->adapter_status);
+                       if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
+                               break;
+                       msleep(10);
+               }
+               if (i == 50)
+                       return -ENODEV;
+       }
+
        /*  Enable Receiving broadcasts */
        add = &bar0->mac_cfg;
        val64 = readq(&bar0->mac_cfg);