There are ulpi access ops implemented in drivers/usb/phy/phy-ulpi.c.
mxc access ops implement the same access operations within mach-imx. This
patch removes the mxc ulpi file and uses phy-ulpi instead for
imx_otg_ulpi_create.
phy-ulpi successfully tested with i.MX27 Phytec phyCARD-S (pca100).
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
uses the same clocks as the GPT. Anyway, on some systems the GPT
may be in use for other purposes.
-config MXC_ULPI
- bool
-
config ARCH_HAS_RNGA
bool
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX25
choice
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for Eukrea CPUIMX27 platform. This includes
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for MX27PDK platform. This includes specific
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX27
help
Include support for phyCARD-s (aka pca100) platform. This
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for mx31 based LILLY1131 modules. This includes
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for MX31 LITEKIT platform. This includes specific
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_W1
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for Phytec pcm037 platform. This includes
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for MX31PDK (3DS) platform. This includes specific
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for mx31moboard platform. This includes specific
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX31
help
Include support for Atmark Armadillo-500 platform. This includes
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX35
help
Include support for Phytec pcm043 platform. This includes
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select MXC_ULPI if USB_ULPI
+ select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX35
help
Include support for Eukrea CPUIMX35 platform. This includes
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
-obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
imx27_add_fsl_usb2_udc(&otg_device_pdata);
}
- usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+ usbh2_pdata.otg = imx_otg_ulpi_create(
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
if (usbh2_pdata.otg)
imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
+++ /dev/null
-/*
- * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- * Copyright 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include "ulpi.h"
-
-/* ULPIVIEW register bits */
-#define ULPIVW_WU (1 << 31) /* Wakeup */
-#define ULPIVW_RUN (1 << 30) /* read/write run */
-#define ULPIVW_WRITE (1 << 29) /* 0 = read 1 = write */
-#define ULPIVW_SS (1 << 27) /* SyncState */
-#define ULPIVW_PORT_MASK 0x07 /* Port field */
-#define ULPIVW_PORT_SHIFT 24
-#define ULPIVW_ADDR_MASK 0xff /* data address field */
-#define ULPIVW_ADDR_SHIFT 16
-#define ULPIVW_RDATA_MASK 0xff /* read data field */
-#define ULPIVW_RDATA_SHIFT 8
-#define ULPIVW_WDATA_MASK 0xff /* write data field */
-#define ULPIVW_WDATA_SHIFT 0
-
-static int ulpi_poll(void __iomem *view, u32 bit)
-{
- int timeout = 10000;
-
- while (timeout--) {
- u32 data = __raw_readl(view);
-
- if (!(data & bit))
- return 0;
-
- cpu_relax();
- };
-
- printk(KERN_WARNING "timeout polling for ULPI device\n");
-
- return -ETIMEDOUT;
-}
-
-static int ulpi_read(struct usb_phy *otg, u32 reg)
-{
- int ret;
- void __iomem *view = otg->io_priv;
-
- /* make sure interface is running */
- if (!(__raw_readl(view) & ULPIVW_SS)) {
- __raw_writel(ULPIVW_WU, view);
-
- /* wait for wakeup */
- ret = ulpi_poll(view, ULPIVW_WU);
- if (ret)
- return ret;
- }
-
- /* read the register */
- __raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
-
- /* wait for completion */
- ret = ulpi_poll(view, ULPIVW_RUN);
- if (ret)
- return ret;
-
- return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
-}
-
-static int ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
-{
- int ret;
- void __iomem *view = otg->io_priv;
-
- /* make sure the interface is running */
- if (!(__raw_readl(view) & ULPIVW_SS)) {
- __raw_writel(ULPIVW_WU, view);
- /* wait for wakeup */
- ret = ulpi_poll(view, ULPIVW_WU);
- if (ret)
- return ret;
- }
-
- __raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
- (reg << ULPIVW_ADDR_SHIFT) |
- ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
-
- /* wait for completion */
- return ulpi_poll(view, ULPIVW_RUN);
-}
-
-struct usb_phy_io_ops mxc_ulpi_access_ops = {
- .read = ulpi_read,
- .write = ulpi_write,
-};
-EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
-
-struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
-{
- return otg_ulpi_create(&mxc_ulpi_access_ops, flags);
-}
#ifndef __MACH_ULPI_H
#define __MACH_ULPI_H
-#ifdef CONFIG_USB_ULPI
-struct usb_phy *imx_otg_ulpi_create(unsigned int flags);
+#include <linux/usb/ulpi.h>
+
+#ifdef CONFIG_USB_ULPI_VIEWPORT
+static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
+{
+ return otg_ulpi_create(&ulpi_viewport_access_ops, flags);
+}
#else
static inline struct usb_phy *imx_otg_ulpi_create(unsigned int flags)
{
}
#endif
-extern struct usb_phy_io_ops mxc_ulpi_access_ops;
-
#endif /* __MACH_ULPI_H */
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff