+++ /dev/null
-1 Notes on the Free Translation Project
-***************************************
-
-Free software is going international! The Free Translation Project is
-a way to get maintainers of free software, translators, and users all
-together, so that free software will gradually become able to speak many
-languages. A few packages already provide translations for their
-messages.
-
- If you found this `ABOUT-NLS' file inside a distribution, you may
-assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site. But you do _not_
-need to install GNU `gettext' prior to configuring, installing or using
-this package with messages translated.
-
- Installers will find here some useful hints. These notes also
-explain how users should proceed for getting the programs to use the
-available translations. They tell how people wanting to contribute and
-work on translations can contact the appropriate team.
-
-1.1 INSTALL Matters
-===================
-
-Some packages are "localizable" when properly installed; the programs
-they contain can be made to speak your own native language. Most such
-packages use GNU `gettext'. Other packages have their own ways to
-internationalization, predating GNU `gettext'.
-
- By default, this package will be installed to allow translation of
-messages. It will automatically detect whether the system already
-provides the GNU `gettext' functions. Installers may use special
-options at configuration time for changing the default behaviour. The
-command:
-
- ./configure --disable-nls
-
-will _totally_ disable translation of messages.
-
- When you already have GNU `gettext' installed on your system and run
-configure without an option for your new package, `configure' will
-probably detect the previously built and installed `libintl' library
-and will decide to use it. If not, you may have to to use the
-`--with-libintl-prefix' option to tell `configure' where to look for it.
-
- Internationalized packages usually have many `po/LL.po' files, where
-LL gives an ISO 639 two-letter code identifying the language. Unless
-translations have been forbidden at `configure' time by using the
-`--disable-nls' switch, all available translations are installed
-together with the package. However, the environment variable `LINGUAS'
-may be set, prior to configuration, to limit the installed set.
-`LINGUAS' should then contain a space separated list of two-letter
-codes, stating which languages are allowed.
-
-1.2 Using This Package
-======================
-
-As a user, if your language has been installed for this package, you
-only have to set the `LANG' environment variable to the appropriate
-`LL_CC' combination. If you happen to have the `LC_ALL' or some other
-`LC_xxx' environment variables set, you should unset them before
-setting `LANG', otherwise the setting of `LANG' will not have the
-desired effect. Here `LL' is an ISO 639 two-letter language code, and
-`CC' is an ISO 3166 two-letter country code. For example, let's
-suppose that you speak German and live in Germany. At the shell
-prompt, merely execute `setenv LANG de_DE' (in `csh'),
-`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
-This can be done from your `.login' or `.profile' file, once and for
-all.
-
- You might think that the country code specification is redundant.
-But in fact, some languages have dialects in different countries. For
-example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
-country code serves to distinguish the dialects.
-
- The locale naming convention of `LL_CC', with `LL' denoting the
-language and `CC' denoting the country, is the one use on systems based
-on GNU libc. On other systems, some variations of this scheme are
-used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
-locales supported by your system for your language by running the
-command `locale -a | grep '^LL''.
-
- Not all programs have translations for all languages. By default, an
-English message is shown in place of a nonexistent translation. If you
-understand other languages, you can set up a priority list of languages.
-This is done through a different environment variable, called
-`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
-for the purpose of message handling, but you still need to have `LANG'
-set to the primary language; this is required by other parts of the
-system libraries. For example, some Swedish users who would rather
-read translations in German than English for when Swedish is not
-available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
-
- Special advice for Norwegian users: The language code for Norwegian
-bokma*l changed from `no' to `nb' recently (in 2003). During the
-transition period, while some message catalogs for this language are
-installed under `nb' and some older ones under `no', it's recommended
-for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
-older translations are used.
-
- In the `LANGUAGE' environment variable, but not in the `LANG'
-environment variable, `LL_CC' combinations can be abbreviated as `LL'
-to denote the language's main dialect. For example, `de' is equivalent
-to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
-(Portuguese as spoken in Portugal) in this context.
-
-1.3 Translating Teams
-=====================
-
-For the Free Translation Project to be a success, we need interested
-people who like their own language and write it well, and who are also
-able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list. The up-to-date list of
-teams can be found at the Free Translation Project's homepage,
-`http://translationproject.org/', in the "Teams" area.
-
- If you'd like to volunteer to _work_ at translating messages, you
-should become a member of the translating team for your own language.
-The subscribing address is _not_ the same as the list itself, it has
-`-request' appended. For example, speakers of Swedish can send a
-message to `sv-request@li.org', having this message body:
-
- subscribe
-
- Keep in mind that team members are expected to participate
-_actively_ in translations, or at solving translational difficulties,
-rather than merely lurking around. If your team does not exist yet and
-you want to start one, or if you are unsure about what to do or how to
-get started, please write to `coordinator@translationproject.org' to
-reach the coordinator for all translator teams.
-
- The English team is special. It works at improving and uniformizing
-the terminology in use. Proven linguistic skills are praised more than
-programming skills, here.
-
-1.4 Available Packages
-======================
-
-Languages are not equally supported in all packages. The following
-matrix shows the current state of internationalization, as of June
-2010. The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination, with a
-translation percentage of at least 50%.
-
- Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca
- +--------------------------------------------------+
- a2ps | [] [] |
- aegis | |
- ant-phone | |
- anubis | |
- aspell | [] [] |
- bash | |
- bfd | |
- bibshelf | [] |
- binutils | |
- bison | |
- bison-runtime | [] |
- bluez-pin | [] [] |
- bombono-dvd | |
- buzztard | |
- cflow | |
- clisp | |
- coreutils | [] [] |
- cpio | |
- cppi | |
- cpplib | [] |
- cryptsetup | |
- dfarc | |
- dialog | [] [] |
- dico | |
- diffutils | [] |
- dink | |
- doodle | |
- e2fsprogs | [] |
- enscript | [] |
- exif | |
- fetchmail | [] |
- findutils | [] |
- flex | [] |
- freedink | |
- gas | |
- gawk | [] [] |
- gcal | [] |
- gcc | |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] [] |
- gettext-tools | [] [] |
- gip | [] |
- gjay | |
- gliv | [] |
- glunarclock | [] [] |
- gnubiff | |
- gnucash | [] |
- gnuedu | |
- gnulib | |
- gnunet | |
- gnunet-gtk | |
- gnutls | |
- gold | |
- gpe-aerial | |
- gpe-beam | |
- gpe-bluetooth | |
- gpe-calendar | |
- gpe-clock | [] |
- gpe-conf | |
- gpe-contacts | |
- gpe-edit | |
- gpe-filemanager | |
- gpe-go | |
- gpe-login | |
- gpe-ownerinfo | [] |
- gpe-package | |
- gpe-sketchbook | |
- gpe-su | [] |
- gpe-taskmanager | [] |
- gpe-timesheet | [] |
- gpe-today | [] |
- gpe-todo | |
- gphoto2 | |
- gprof | [] |
- gpsdrive | |
- gramadoir | |
- grep | |
- grub | [] [] |
- gsasl | |
- gss | |
- gst-plugins-bad | [] |
- gst-plugins-base | [] |
- gst-plugins-good | [] |
- gst-plugins-ugly | [] |
- gstreamer | [] [] [] |
- gtick | |
- gtkam | [] |
- gtkorphan | [] |
- gtkspell | [] [] [] |
- gutenprint | |
- hello | [] |
- help2man | |
- hylafax | |
- idutils | |
- indent | [] [] |
- iso_15924 | |
- iso_3166 | [] [] [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | |
- iso_639 | [] [] [] [] |
- iso_639_3 | |
- jwhois | |
- kbd | |
- keytouch | [] |
- keytouch-editor | |
- keytouch-keyboa... | [] |
- klavaro | [] |
- latrine | |
- ld | [] |
- leafpad | [] [] |
- libc | [] [] |
- libexif | () |
- libextractor | |
- libgnutls | |
- libgpewidget | |
- libgpg-error | |
- libgphoto2 | |
- libgphoto2_port | |
- libgsasl | |
- libiconv | [] |
- libidn | |
- lifelines | |
- liferea | [] [] |
- lilypond | |
- linkdr | [] |
- lordsawar | |
- lprng | |
- lynx | [] |
- m4 | |
- mailfromd | |
- mailutils | |
- make | |
- man-db | |
- man-db-manpages | |
- minicom | |
- mkisofs | |
- myserver | |
- nano | [] [] |
- opcodes | |
- parted | |
- pies | |
- popt | |
- psmisc | |
- pspp | [] |
- pwdutils | |
- radius | [] |
- recode | [] [] |
- rosegarden | |
- rpm | |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] |
- sed | [] [] |
- sharutils | [] [] |
- shishi | |
- skencil | |
- solfege | |
- solfege-manual | |
- soundtracker | |
- sp | |
- sysstat | |
- tar | [] |
- texinfo | |
- tin | |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] |
- vice | |
- vmm | |
- vorbis-tools | |
- wastesedge | |
- wdiff | |
- wget | [] [] |
- wyslij-po | |
- xchat | [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] |
- +--------------------------------------------------+
- af am an ar as ast az be be@latin bg bn_IN bs ca
- 6 0 1 2 3 19 1 10 3 28 3 1 38
-
- crh cs da de el en en_GB en_ZA eo es et eu fa
- +-------------------------------------------------+
- a2ps | [] [] [] [] [] [] [] |
- aegis | [] [] [] |
- ant-phone | [] () |
- anubis | [] [] |
- aspell | [] [] [] [] [] |
- bash | [] [] [] |
- bfd | [] |
- bibshelf | [] [] [] |
- binutils | [] |
- bison | [] [] |
- bison-runtime | [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] |
- bombono-dvd | [] |
- buzztard | [] [] [] |
- cflow | [] [] |
- clisp | [] [] [] [] |
- coreutils | [] [] [] [] |
- cpio | |
- cppi | |
- cpplib | [] [] [] |
- cryptsetup | [] |
- dfarc | [] [] [] |
- dialog | [] [] [] [] [] |
- dico | |
- diffutils | [] [] [] [] [] [] |
- dink | [] [] [] |
- doodle | [] |
- e2fsprogs | [] [] [] |
- enscript | [] [] [] |
- exif | () [] [] |
- fetchmail | [] [] () [] [] [] |
- findutils | [] [] [] |
- flex | [] [] |
- freedink | [] [] [] |
- gas | [] |
- gawk | [] [] [] |
- gcal | [] |
- gcc | [] [] |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] [] [] [] |
- gettext-tools | [] [] [] |
- gip | [] [] [] [] |
- gjay | [] |
- gliv | [] [] [] |
- glunarclock | [] [] |
- gnubiff | () |
- gnucash | [] () () () () |
- gnuedu | [] [] |
- gnulib | [] [] |
- gnunet | |
- gnunet-gtk | [] |
- gnutls | [] [] |
- gold | [] |
- gpe-aerial | [] [] [] [] |
- gpe-beam | [] [] [] [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] |
- gpe-clock | [] [] [] [] |
- gpe-conf | [] [] [] |
- gpe-contacts | [] [] [] |
- gpe-edit | [] [] |
- gpe-filemanager | [] [] [] |
- gpe-go | [] [] [] [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] [] [] |
- gpe-package | [] [] [] |
- gpe-sketchbook | [] [] [] [] |
- gpe-su | [] [] [] [] |
- gpe-taskmanager | [] [] [] [] |
- gpe-timesheet | [] [] [] [] |
- gpe-today | [] [] [] [] |
- gpe-todo | [] [] [] |
- gphoto2 | [] [] () [] [] [] |
- gprof | [] [] [] |
- gpsdrive | [] [] [] |
- gramadoir | [] [] [] |
- grep | [] |
- grub | [] [] |
- gsasl | [] |
- gss | |
- gst-plugins-bad | [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] () [] |
- gtkam | [] [] () [] [] |
- gtkorphan | [] [] [] [] |
- gtkspell | [] [] [] [] [] [] [] |
- gutenprint | [] [] [] |
- hello | [] [] [] [] |
- help2man | [] |
- hylafax | [] [] |
- idutils | [] [] |
- indent | [] [] [] [] [] [] [] |
- iso_15924 | [] () [] [] |
- iso_3166 | [] [] [] [] () [] [] [] () |
- iso_3166_2 | () |
- iso_4217 | [] [] [] () [] [] |
- iso_639 | [] [] [] [] () [] [] |
- iso_639_3 | [] |
- jwhois | [] |
- kbd | [] [] [] [] [] |
- keytouch | [] [] |
- keytouch-editor | [] [] |
- keytouch-keyboa... | [] |
- klavaro | [] [] [] [] |
- latrine | [] () |
- ld | [] [] |
- leafpad | [] [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] [] () |
- libextractor | |
- libgnutls | [] |
- libgpewidget | [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] () |
- libgphoto2_port | [] () [] |
- libgsasl | |
- libiconv | [] [] [] [] [] |
- libidn | [] [] [] |
- lifelines | [] () |
- liferea | [] [] [] [] [] |
- lilypond | [] [] [] |
- linkdr | [] [] [] |
- lordsawar | [] |
- lprng | |
- lynx | [] [] [] [] |
- m4 | [] [] [] [] |
- mailfromd | |
- mailutils | [] |
- make | [] [] [] |
- man-db | |
- man-db-manpages | |
- minicom | [] [] [] [] |
- mkisofs | |
- myserver | |
- nano | [] [] [] |
- opcodes | [] [] |
- parted | [] [] |
- pies | |
- popt | [] [] [] [] [] |
- psmisc | [] [] [] |
- pspp | [] |
- pwdutils | [] |
- radius | [] |
- recode | [] [] [] [] [] [] |
- rosegarden | () () () |
- rpm | [] [] [] |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] [] [] |
- sed | [] [] [] [] [] [] |
- sharutils | [] [] [] [] |
- shishi | |
- skencil | [] () [] |
- solfege | [] [] [] |
- solfege-manual | [] [] |
- soundtracker | [] [] [] |
- sp | [] |
- sysstat | [] [] [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] |
- tin | [] [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] [] [] [] |
- vice | () () |
- vmm | [] |
- vorbis-tools | [] [] |
- wastesedge | [] |
- wdiff | [] [] |
- wget | [] [] [] |
- wyslij-po | |
- xchat | [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] [] [] [] |
- +-------------------------------------------------+
- crh cs da de el en en_GB en_ZA eo es et eu fa
- 5 64 105 117 18 1 8 0 28 89 18 19 0
-
- fi fr ga gl gu he hi hr hu hy id is it ja ka kn
- +----------------------------------------------------+
- a2ps | [] [] [] [] |
- aegis | [] [] |
- ant-phone | [] [] |
- anubis | [] [] [] [] |
- aspell | [] [] [] [] |
- bash | [] [] [] [] |
- bfd | [] [] [] |
- bibshelf | [] [] [] [] [] |
- binutils | [] [] [] |
- bison | [] [] [] [] |
- bison-runtime | [] [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] [] [] |
- bombono-dvd | [] |
- buzztard | [] |
- cflow | [] [] [] |
- clisp | [] |
- coreutils | [] [] [] [] [] |
- cpio | [] [] [] [] |
- cppi | [] [] |
- cpplib | [] [] [] |
- cryptsetup | [] [] [] |
- dfarc | [] [] [] |
- dialog | [] [] [] [] [] [] [] |
- dico | |
- diffutils | [] [] [] [] [] [] [] [] [] |
- dink | [] |
- doodle | [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] |
- exif | [] [] [] [] [] [] |
- fetchmail | [] [] [] [] |
- findutils | [] [] [] [] [] [] |
- flex | [] [] [] |
- freedink | [] [] [] |
- gas | [] [] |
- gawk | [] [] [] [] () [] |
- gcal | [] |
- gcc | [] |
- gettext-examples | [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] |
- gip | [] [] [] [] [] [] |
- gjay | [] |
- gliv | [] () |
- glunarclock | [] [] [] [] |
- gnubiff | () [] () |
- gnucash | () () () () () [] |
- gnuedu | [] [] |
- gnulib | [] [] [] [] [] [] |
- gnunet | |
- gnunet-gtk | [] |
- gnutls | [] [] |
- gold | [] [] |
- gpe-aerial | [] [] [] |
- gpe-beam | [] [] [] [] |
- gpe-bluetooth | [] [] [] [] |
- gpe-calendar | [] [] |
- gpe-clock | [] [] [] [] [] |
- gpe-conf | [] [] [] [] |
- gpe-contacts | [] [] [] [] |
- gpe-edit | [] [] [] |
- gpe-filemanager | [] [] [] [] |
- gpe-go | [] [] [] [] [] |
- gpe-login | [] [] [] |
- gpe-ownerinfo | [] [] [] [] [] |
- gpe-package | [] [] [] |
- gpe-sketchbook | [] [] [] [] |
- gpe-su | [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] |
- gpe-timesheet | [] [] [] [] [] |
- gpe-today | [] [] [] [] [] [] [] |
- gpe-todo | [] [] [] |
- gphoto2 | [] [] [] [] [] [] |
- gprof | [] [] [] [] |
- gpsdrive | [] [] [] |
- gramadoir | [] [] [] |
- grep | [] [] |
- grub | [] [] [] [] |
- gsasl | [] [] [] [] [] |
- gss | [] [] [] [] [] |
- gst-plugins-bad | [] [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] [] [] [] [] |
- gtkam | [] [] [] [] [] |
- gtkorphan | [] [] [] |
- gtkspell | [] [] [] [] [] [] [] [] [] |
- gutenprint | [] [] [] [] |
- hello | [] [] [] |
- help2man | [] [] |
- hylafax | [] |
- idutils | [] [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] [] |
- iso_15924 | [] () [] [] |
- iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] |
- iso_3166_2 | () [] [] [] |
- iso_4217 | [] () [] [] [] [] |
- iso_639 | [] () [] [] [] [] [] [] [] |
- iso_639_3 | () [] [] |
- jwhois | [] [] [] [] [] |
- kbd | [] [] |
- keytouch | [] [] [] [] [] [] |
- keytouch-editor | [] [] [] [] [] |
- keytouch-keyboa... | [] [] [] [] [] |
- klavaro | [] [] |
- latrine | [] [] [] |
- ld | [] [] [] [] |
- leafpad | [] [] [] [] [] [] [] () |
- libc | [] [] [] [] [] |
- libexif | [] |
- libextractor | |
- libgnutls | [] [] |
- libgpewidget | [] [] [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] [] [] |
- libgphoto2_port | [] [] [] |
- libgsasl | [] [] [] [] [] |
- libiconv | [] [] [] [] [] [] |
- libidn | [] [] [] [] |
- lifelines | () |
- liferea | [] [] [] [] |
- lilypond | [] [] |
- linkdr | [] [] [] [] [] |
- lordsawar | |
- lprng | [] |
- lynx | [] [] [] [] [] |
- m4 | [] [] [] [] [] [] |
- mailfromd | |
- mailutils | [] [] |
- make | [] [] [] [] [] [] [] [] [] |
- man-db | [] [] |
- man-db-manpages | [] |
- minicom | [] [] [] [] [] |
- mkisofs | [] [] [] [] |
- myserver | |
- nano | [] [] [] [] [] [] |
- opcodes | [] [] [] [] |
- parted | [] [] [] [] |
- pies | |
- popt | [] [] [] [] [] [] [] [] [] |
- psmisc | [] [] [] |
- pspp | |
- pwdutils | [] [] |
- radius | [] [] |
- recode | [] [] [] [] [] [] [] [] |
- rosegarden | () () () () () |
- rpm | [] [] |
- rush | |
- sarg | [] |
- screem | [] [] |
- scrollkeeper | [] [] [] [] |
- sed | [] [] [] [] [] [] [] [] |
- sharutils | [] [] [] [] [] [] [] |
- shishi | [] |
- skencil | [] |
- solfege | [] [] [] [] |
- solfege-manual | [] [] |
- soundtracker | [] [] |
- sp | [] () |
- sysstat | [] [] [] [] [] |
- tar | [] [] [] [] [] [] [] |
- texinfo | [] [] [] [] |
- tin | [] |
- unicode-han-tra... | |
- unicode-transla... | [] [] |
- util-linux-ng | [] [] [] [] [] [] |
- vice | () () () |
- vmm | [] |
- vorbis-tools | [] |
- wastesedge | () () |
- wdiff | [] |
- wget | [] [] [] [] [] [] [] [] |
- wyslij-po | [] [] [] |
- xchat | [] [] [] [] [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] [] [] |
- +----------------------------------------------------+
- fi fr ga gl gu he hi hr hu hy id is it ja ka kn
- 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4
-
- ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
- +-----------------------------------------------+
- a2ps | [] |
- aegis | |
- ant-phone | |
- anubis | [] [] |
- aspell | [] |
- bash | |
- bfd | |
- bibshelf | [] [] |
- binutils | |
- bison | [] |
- bison-runtime | [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] |
- bombono-dvd | |
- buzztard | |
- cflow | |
- clisp | |
- coreutils | [] |
- cpio | |
- cppi | |
- cpplib | |
- cryptsetup | |
- dfarc | [] |
- dialog | [] [] [] [] [] |
- dico | |
- diffutils | [] [] |
- dink | |
- doodle | |
- e2fsprogs | |
- enscript | |
- exif | [] |
- fetchmail | |
- findutils | |
- flex | |
- freedink | [] |
- gas | |
- gawk | |
- gcal | |
- gcc | |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] |
- gettext-tools | [] |
- gip | [] [] |
- gjay | |
- gliv | |
- glunarclock | [] |
- gnubiff | |
- gnucash | () () () () |
- gnuedu | |
- gnulib | |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] |
- gold | |
- gpe-aerial | [] |
- gpe-beam | [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] |
- gpe-clock | [] [] [] [] [] |
- gpe-conf | [] [] |
- gpe-contacts | [] [] |
- gpe-edit | [] |
- gpe-filemanager | [] [] |
- gpe-go | [] [] [] |
- gpe-login | [] |
- gpe-ownerinfo | [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] |
- gpe-su | [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] [] |
- gpe-timesheet | [] [] |
- gpe-today | [] [] [] [] |
- gpe-todo | [] [] |
- gphoto2 | |
- gprof | [] |
- gpsdrive | |
- gramadoir | |
- grep | |
- grub | |
- gsasl | |
- gss | |
- gst-plugins-bad | [] [] [] [] |
- gst-plugins-base | [] [] |
- gst-plugins-good | [] [] |
- gst-plugins-ugly | [] [] [] [] [] |
- gstreamer | |
- gtick | |
- gtkam | [] |
- gtkorphan | [] [] |
- gtkspell | [] [] [] [] [] [] [] |
- gutenprint | |
- hello | [] [] [] |
- help2man | |
- hylafax | |
- idutils | |
- indent | |
- iso_15924 | [] [] |
- iso_3166 | [] [] () [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | [] [] |
- iso_639 | [] [] |
- iso_639_3 | [] |
- jwhois | [] |
- kbd | |
- keytouch | [] |
- keytouch-editor | [] |
- keytouch-keyboa... | [] |
- klavaro | [] |
- latrine | [] |
- ld | |
- leafpad | [] [] [] |
- libc | [] |
- libexif | |
- libextractor | |
- libgnutls | [] |
- libgpewidget | [] [] |
- libgpg-error | |
- libgphoto2 | |
- libgphoto2_port | |
- libgsasl | |
- libiconv | |
- libidn | |
- lifelines | |
- liferea | |
- lilypond | |
- linkdr | |
- lordsawar | |
- lprng | |
- lynx | |
- m4 | |
- mailfromd | |
- mailutils | |
- make | [] |
- man-db | |
- man-db-manpages | |
- minicom | [] |
- mkisofs | |
- myserver | |
- nano | [] [] |
- opcodes | |
- parted | |
- pies | |
- popt | [] [] [] |
- psmisc | |
- pspp | |
- pwdutils | |
- radius | |
- recode | |
- rosegarden | |
- rpm | |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] |
- sed | |
- sharutils | |
- shishi | |
- skencil | |
- solfege | [] |
- solfege-manual | |
- soundtracker | |
- sp | |
- sysstat | [] |
- tar | [] |
- texinfo | [] |
- tin | |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | |
- vice | |
- vmm | |
- vorbis-tools | |
- wastesedge | |
- wdiff | |
- wget | [] |
- wyslij-po | |
- xchat | [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] |
- +-----------------------------------------------+
- ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
- 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1
-
- nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
- +---------------------------------------------------+
- a2ps | [] [] [] [] [] [] [] [] |
- aegis | [] [] [] |
- ant-phone | [] [] |
- anubis | [] [] [] |
- aspell | [] [] [] [] [] |
- bash | [] [] |
- bfd | [] |
- bibshelf | [] [] |
- binutils | [] [] |
- bison | [] [] [] |
- bison-runtime | [] [] [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] [] [] |
- bombono-dvd | [] () |
- buzztard | [] [] |
- cflow | [] |
- clisp | [] [] |
- coreutils | [] [] [] [] [] [] |
- cpio | [] [] [] |
- cppi | [] |
- cpplib | [] |
- cryptsetup | [] |
- dfarc | [] |
- dialog | [] [] [] [] |
- dico | [] |
- diffutils | [] [] [] [] [] [] |
- dink | () |
- doodle | [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] [] |
- exif | [] [] [] () [] |
- fetchmail | [] [] [] [] |
- findutils | [] [] [] [] [] |
- flex | [] [] [] [] [] |
- freedink | [] [] |
- gas | |
- gawk | [] [] [] [] |
- gcal | |
- gcc | [] |
- gettext-examples | [] [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] [] [] |
- gip | [] [] [] [] [] |
- gjay | |
- gliv | [] [] [] [] [] [] |
- glunarclock | [] [] [] [] [] |
- gnubiff | [] () |
- gnucash | [] () () () |
- gnuedu | [] |
- gnulib | [] [] [] [] |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] [] |
- gold | |
- gpe-aerial | [] [] [] [] [] [] [] |
- gpe-beam | [] [] [] [] [] [] [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] [] [] [] |
- gpe-clock | [] [] [] [] [] [] [] [] |
- gpe-conf | [] [] [] [] [] [] [] |
- gpe-contacts | [] [] [] [] [] |
- gpe-edit | [] [] [] |
- gpe-filemanager | [] [] [] |
- gpe-go | [] [] [] [] [] [] [] [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] [] [] [] [] [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] [] [] [] [] [] |
- gpe-su | [] [] [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] [] [] [] |
- gpe-timesheet | [] [] [] [] [] [] [] [] |
- gpe-today | [] [] [] [] [] [] [] [] |
- gpe-todo | [] [] [] [] [] |
- gphoto2 | [] [] [] [] [] [] [] [] |
- gprof | [] [] [] |
- gpsdrive | [] [] |
- gramadoir | [] [] |
- grep | [] [] [] [] |
- grub | [] [] [] |
- gsasl | [] [] [] [] |
- gss | [] [] [] |
- gst-plugins-bad | [] [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] [] [] |
- gtkam | [] [] [] [] [] [] |
- gtkorphan | [] |
- gtkspell | [] [] [] [] [] [] [] [] [] [] |
- gutenprint | [] [] |
- hello | [] [] [] [] |
- help2man | [] [] |
- hylafax | [] |
- idutils | [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] |
- iso_15924 | [] [] [] [] |
- iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] |
- iso_3166_2 | [] [] [] |
- iso_4217 | [] [] [] [] [] [] [] [] |
- iso_639 | [] [] [] [] [] [] [] [] [] |
- iso_639_3 | [] [] |
- jwhois | [] [] [] [] |
- kbd | [] [] [] |
- keytouch | [] [] [] |
- keytouch-editor | [] [] [] |
- keytouch-keyboa... | [] [] [] |
- klavaro | [] [] |
- latrine | [] [] |
- ld | |
- leafpad | [] [] [] [] [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] [] () [] |
- libextractor | |
- libgnutls | [] [] |
- libgpewidget | [] [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] [] |
- libgphoto2_port | [] [] [] [] [] |
- libgsasl | [] [] [] [] [] |
- libiconv | [] [] [] [] [] |
- libidn | [] [] |
- lifelines | [] [] |
- liferea | [] [] [] [] [] () () [] |
- lilypond | [] |
- linkdr | [] [] [] |
- lordsawar | |
- lprng | [] |
- lynx | [] [] [] |
- m4 | [] [] [] [] [] |
- mailfromd | [] |
- mailutils | [] |
- make | [] [] [] [] |
- man-db | [] [] [] |
- man-db-manpages | [] [] [] |
- minicom | [] [] [] [] |
- mkisofs | [] [] [] |
- myserver | |
- nano | [] [] [] [] |
- opcodes | [] [] |
- parted | [] [] [] [] |
- pies | [] |
- popt | [] [] [] [] |
- psmisc | [] [] [] |
- pspp | [] [] |
- pwdutils | [] |
- radius | [] [] [] |
- recode | [] [] [] [] [] [] [] [] |
- rosegarden | () () |
- rpm | [] [] [] |
- rush | [] [] |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] [] [] [] [] [] |
- sed | [] [] [] [] [] [] [] [] [] |
- sharutils | [] [] [] [] |
- shishi | [] |
- skencil | [] [] |
- solfege | [] [] [] [] |
- solfege-manual | [] [] [] |
- soundtracker | [] |
- sp | |
- sysstat | [] [] [] [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] [] |
- tin | [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] [] [] [] [] |
- vice | [] |
- vmm | [] |
- vorbis-tools | [] [] |
- wastesedge | [] |
- wdiff | [] [] |
- wget | [] [] [] [] [] [] [] |
- wyslij-po | [] [] [] |
- xchat | [] [] [] [] [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] |
- +---------------------------------------------------+
- nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
- 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37
-
- sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
- +---------------------------------------------------+
- a2ps | [] [] [] [] [] | 27
- aegis | [] | 9
- ant-phone | [] [] [] [] | 9
- anubis | [] [] [] [] | 15
- aspell | [] [] [] | 20
- bash | [] [] [] | 12
- bfd | [] | 6
- bibshelf | [] [] [] | 16
- binutils | [] [] | 8
- bison | [] [] | 12
- bison-runtime | [] [] [] [] [] [] | 29
- bluez-pin | [] [] [] [] [] [] [] [] | 37
- bombono-dvd | [] | 4
- buzztard | [] | 7
- cflow | [] [] [] | 9
- clisp | | 10
- coreutils | [] [] [] [] | 22
- cpio | [] [] [] [] [] [] | 13
- cppi | [] [] | 5
- cpplib | [] [] [] [] [] [] | 14
- cryptsetup | [] [] | 7
- dfarc | [] | 9
- dialog | [] [] [] [] [] [] [] | 30
- dico | [] | 2
- diffutils | [] [] [] [] [] [] | 30
- dink | | 4
- doodle | [] [] | 7
- e2fsprogs | [] [] [] | 11
- enscript | [] [] [] [] | 17
- exif | [] [] [] | 16
- fetchmail | [] [] [] | 17
- findutils | [] [] [] [] [] | 20
- flex | [] [] [] [] | 15
- freedink | [] | 10
- gas | [] | 4
- gawk | [] [] [] [] | 18
- gcal | [] [] | 5
- gcc | [] [] [] | 7
- gettext-examples | [] [] [] [] [] [] [] | 34
- gettext-runtime | [] [] [] [] [] [] [] | 29
- gettext-tools | [] [] [] [] [] [] | 22
- gip | [] [] [] [] | 22
- gjay | [] | 3
- gliv | [] [] [] | 14
- glunarclock | [] [] [] [] [] | 19
- gnubiff | [] [] | 4
- gnucash | () [] () [] () | 10
- gnuedu | [] [] | 7
- gnulib | [] [] [] [] | 16
- gnunet | [] | 1
- gnunet-gtk | [] [] [] | 5
- gnutls | [] [] [] | 10
- gold | [] | 4
- gpe-aerial | [] [] [] | 18
- gpe-beam | [] [] [] | 19
- gpe-bluetooth | [] [] [] | 13
- gpe-calendar | [] [] [] [] | 12
- gpe-clock | [] [] [] [] [] | 28
- gpe-conf | [] [] [] [] | 20
- gpe-contacts | [] [] [] | 17
- gpe-edit | [] [] [] | 12
- gpe-filemanager | [] [] [] [] | 16
- gpe-go | [] [] [] [] [] | 25
- gpe-login | [] [] [] | 11
- gpe-ownerinfo | [] [] [] [] [] | 25
- gpe-package | [] [] [] | 13
- gpe-sketchbook | [] [] [] | 20
- gpe-su | [] [] [] [] [] | 30
- gpe-taskmanager | [] [] [] [] [] | 29
- gpe-timesheet | [] [] [] [] [] | 25
- gpe-today | [] [] [] [] [] [] | 30
- gpe-todo | [] [] [] [] | 17
- gphoto2 | [] [] [] [] [] | 24
- gprof | [] [] [] | 15
- gpsdrive | [] [] [] | 11
- gramadoir | [] [] [] | 11
- grep | [] [] [] | 10
- grub | [] [] [] | 14
- gsasl | [] [] [] [] | 14
- gss | [] [] [] | 11
- gst-plugins-bad | [] [] [] [] | 26
- gst-plugins-base | [] [] [] [] [] | 24
- gst-plugins-good | [] [] [] [] | 24
- gst-plugins-ugly | [] [] [] [] [] | 29
- gstreamer | [] [] [] [] | 22
- gtick | [] [] [] | 13
- gtkam | [] [] [] | 20
- gtkorphan | [] [] [] | 14
- gtkspell | [] [] [] [] [] [] [] [] [] | 45
- gutenprint | [] | 10
- hello | [] [] [] [] [] [] | 21
- help2man | [] [] | 7
- hylafax | [] | 5
- idutils | [] [] [] [] | 17
- indent | [] [] [] [] [] [] | 30
- iso_15924 | () [] () [] [] | 16
- iso_3166 | [] [] () [] [] () [] [] [] () | 53
- iso_3166_2 | () [] () [] | 9
- iso_4217 | [] () [] [] () [] [] | 26
- iso_639 | [] [] [] () [] () [] [] [] [] | 38
- iso_639_3 | [] () | 8
- jwhois | [] [] [] [] [] | 16
- kbd | [] [] [] [] [] | 15
- keytouch | [] [] [] | 16
- keytouch-editor | [] [] [] | 14
- keytouch-keyboa... | [] [] [] | 14
- klavaro | [] | 11
- latrine | [] [] [] | 10
- ld | [] [] [] [] | 11
- leafpad | [] [] [] [] [] [] | 33
- libc | [] [] [] [] [] | 21
- libexif | [] () | 7
- libextractor | [] | 1
- libgnutls | [] [] [] | 9
- libgpewidget | [] [] [] | 14
- libgpg-error | [] [] [] | 9
- libgphoto2 | [] [] | 8
- libgphoto2_port | [] [] [] [] | 14
- libgsasl | [] [] [] | 13
- libiconv | [] [] [] [] | 21
- libidn | () [] [] | 11
- lifelines | [] | 4
- liferea | [] [] [] | 21
- lilypond | [] | 7
- linkdr | [] [] [] [] [] | 17
- lordsawar | | 1
- lprng | [] | 3
- lynx | [] [] [] [] | 17
- m4 | [] [] [] [] | 19
- mailfromd | [] [] | 3
- mailutils | [] | 5
- make | [] [] [] [] | 21
- man-db | [] [] [] | 8
- man-db-manpages | | 4
- minicom | [] [] | 16
- mkisofs | [] [] | 9
- myserver | | 0
- nano | [] [] [] [] | 21
- opcodes | [] [] [] | 11
- parted | [] [] [] [] [] | 15
- pies | [] [] | 3
- popt | [] [] [] [] [] [] | 27
- psmisc | [] [] | 11
- pspp | | 4
- pwdutils | [] [] | 6
- radius | [] [] | 9
- recode | [] [] [] [] | 28
- rosegarden | () | 0
- rpm | [] [] [] | 11
- rush | [] [] | 4
- sarg | | 1
- screem | [] | 3
- scrollkeeper | [] [] [] [] [] | 27
- sed | [] [] [] [] [] | 30
- sharutils | [] [] [] [] [] | 22
- shishi | [] | 3
- skencil | [] [] | 7
- solfege | [] [] [] [] | 16
- solfege-manual | [] | 8
- soundtracker | [] [] [] | 9
- sp | [] | 3
- sysstat | [] [] | 15
- tar | [] [] [] [] [] [] | 23
- texinfo | [] [] [] [] [] | 17
- tin | | 4
- unicode-han-tra... | | 0
- unicode-transla... | | 2
- util-linux-ng | [] [] [] [] | 20
- vice | () () | 1
- vmm | [] | 4
- vorbis-tools | [] | 6
- wastesedge | | 2
- wdiff | [] [] | 7
- wget | [] [] [] [] [] | 26
- wyslij-po | [] [] | 8
- xchat | [] [] [] [] [] [] | 36
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63
- xkeyboard-config | [] [] [] | 22
- +---------------------------------------------------+
- 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
- 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618
-
- Some counters in the preceding matrix are higher than the number of
-visible blocks let us expect. This is because a few extra PO files are
-used for implementing regional variants of languages, or language
-dialects.
-
- For a PO file in the matrix above to be effective, the package to
-which it applies should also have been internationalized and
-distributed as such by its maintainer. There might be an observable
-lag between the mere existence a PO file and its wide availability in a
-distribution.
-
- If June 2010 seems to be old, you may fetch a more recent copy of
-this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
-matrix with full percentage details can be found at
-`http://translationproject.org/extra/matrix.html'.
-
-1.5 Using `gettext' in new packages
-===================================
-
-If you are writing a freely available program and want to
-internationalize it you are welcome to use GNU `gettext' in your
-package. Of course you have to respect the GNU Library General Public
-License which covers the use of the GNU `gettext' library. This means
-in particular that even non-free programs can use `libintl' as a shared
-library, whereas only free software can use `libintl' as a static
-library or use modified versions of `libintl'.
-
- Once the sources are changed appropriately and the setup can handle
-the use of `gettext' the only thing missing are the translations. The
-Free Translation Project is also available for packages which are not
-developed inside the GNU project. Therefore the information given above
-applies also for every other Free Software Project. Contact
-`coordinator@translationproject.org' to make the `.pot' files available
-to the translation teams.
-
+++ /dev/null
-Authors of GNU Hello.
-
- Copyright (C) 1999, 2005, 2006 Free Software Foundation, Inc.
-
- Copying and distribution of this file, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved.
-
-The following contributions warranted legal paper exchanges with the
-Free Software Foundation. See also the ChangeLog and THANKS files.
-
-Mike Haertel
-David MacKenzie
-Jan Brittenson
-Roland McGrath
-Charles Hannum
-Bruce Korb hello.c, configure.ac.
-Karl Eichwalder all files.
-Karl Berry all files.
-The King releases.
+++ /dev/null
- GNU GENERAL PUBLIC LICENSE
- Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
- The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works. By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users. We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors. You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
- To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights. Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received. You must make sure that they, too, receive
-or can get the source code. And you must show them these terms so they
-know their rights.
-
- Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
- For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software. For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
- Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so. This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software. The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable. Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products. If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
- Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary. To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- TERMS AND CONDITIONS
-
- 0. Definitions.
-
- "This License" refers to version 3 of the GNU General Public License.
-
- "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
- "The Program" refers to any copyrightable work licensed under this
-License. Each licensee is addressed as "you". "Licensees" and
-"recipients" may be individuals or organizations.
-
- To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy. The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
- A "covered work" means either the unmodified Program or a work based
-on the Program.
-
- To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy. Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
- To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies. Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
- An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License. If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
- 1. Source Code.
-
- The "source code" for a work means the preferred form of the work
-for making modifications to it. "Object code" means any non-source
-form of a work.
-
- A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
- The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form. A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
- The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities. However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work. For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
- The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
- The Corresponding Source for a work in source code form is that
-same work.
-
- 2. Basic Permissions.
-
- All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met. This License explicitly affirms your unlimited
-permission to run the unmodified Program. The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work. This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
- You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force. You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright. Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
- Conveying under any other circumstances is permitted solely under
-the conditions stated below. Sublicensing is not allowed; section 10
-makes it unnecessary.
-
- 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
- No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
- When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
- 4. Conveying Verbatim Copies.
-
- You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
- You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
- 5. Conveying Modified Source Versions.
-
- You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
- a) The work must carry prominent notices stating that you modified
- it, and giving a relevant date.
-
- b) The work must carry prominent notices stating that it is
- released under this License and any conditions added under section
- 7. This requirement modifies the requirement in section 4 to
- "keep intact all notices".
-
- c) You must license the entire work, as a whole, under this
- License to anyone who comes into possession of a copy. This
- License will therefore apply, along with any applicable section 7
- additional terms, to the whole of the work, and all its parts,
- regardless of how they are packaged. This License gives no
- permission to license the work in any other way, but it does not
- invalidate such permission if you have separately received it.
-
- d) If the work has interactive user interfaces, each must display
- Appropriate Legal Notices; however, if the Program has interactive
- interfaces that do not display Appropriate Legal Notices, your
- work need not make them do so.
-
- A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit. Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
- 6. Conveying Non-Source Forms.
-
- You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
- a) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by the
- Corresponding Source fixed on a durable physical medium
- customarily used for software interchange.
-
- b) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by a
- written offer, valid for at least three years and valid for as
- long as you offer spare parts or customer support for that product
- model, to give anyone who possesses the object code either (1) a
- copy of the Corresponding Source for all the software in the
- product that is covered by this License, on a durable physical
- medium customarily used for software interchange, for a price no
- more than your reasonable cost of physically performing this
- conveying of source, or (2) access to copy the
- Corresponding Source from a network server at no charge.
-
- c) Convey individual copies of the object code with a copy of the
- written offer to provide the Corresponding Source. This
- alternative is allowed only occasionally and noncommercially, and
- only if you received the object code with such an offer, in accord
- with subsection 6b.
-
- d) Convey the object code by offering access from a designated
- place (gratis or for a charge), and offer equivalent access to the
- Corresponding Source in the same way through the same place at no
- further charge. You need not require recipients to copy the
- Corresponding Source along with the object code. If the place to
- copy the object code is a network server, the Corresponding Source
- may be on a different server (operated by you or a third party)
- that supports equivalent copying facilities, provided you maintain
- clear directions next to the object code saying where to find the
- Corresponding Source. Regardless of what server hosts the
- Corresponding Source, you remain obligated to ensure that it is
- available for as long as needed to satisfy these requirements.
-
- e) Convey the object code using peer-to-peer transmission, provided
- you inform other peers where the object code and Corresponding
- Source of the work are being offered to the general public at no
- charge under subsection 6d.
-
- A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
- A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling. In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage. For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product. A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
- "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source. The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
- If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information. But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
- The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed. Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
- Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
- 7. Additional Terms.
-
- "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law. If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
- When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it. (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.) You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
- Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
- a) Disclaiming warranty or limiting liability differently from the
- terms of sections 15 and 16 of this License; or
-
- b) Requiring preservation of specified reasonable legal notices or
- author attributions in that material or in the Appropriate Legal
- Notices displayed by works containing it; or
-
- c) Prohibiting misrepresentation of the origin of that material, or
- requiring that modified versions of such material be marked in
- reasonable ways as different from the original version; or
-
- d) Limiting the use for publicity purposes of names of licensors or
- authors of the material; or
-
- e) Declining to grant rights under trademark law for use of some
- trade names, trademarks, or service marks; or
-
- f) Requiring indemnification of licensors and authors of that
- material by anyone who conveys the material (or modified versions of
- it) with contractual assumptions of liability to the recipient, for
- any liability that these contractual assumptions directly impose on
- those licensors and authors.
-
- All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10. If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term. If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
- If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
- Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
- 8. Termination.
-
- You may not propagate or modify a covered work except as expressly
-provided under this License. Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
- However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
- Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
- Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License. If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
- 9. Acceptance Not Required for Having Copies.
-
- You are not required to accept this License in order to receive or
-run a copy of the Program. Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance. However,
-nothing other than this License grants you permission to propagate or
-modify any covered work. These actions infringe copyright if you do
-not accept this License. Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
- 10. Automatic Licensing of Downstream Recipients.
-
- Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License. You are not responsible
-for enforcing compliance by third parties with this License.
-
- An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations. If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
- You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License. For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
- 11. Patents.
-
- A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based. The
-work thus licensed is called the contributor's "contributor version".
-
- A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version. For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
- Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
- In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement). To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
- If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients. "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
- If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
- A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License. You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
- Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
- 12. No Surrender of Others' Freedom.
-
- If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all. For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
- 13. Use with the GNU Affero General Public License.
-
- Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work. The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
- 14. Revised Versions of this License.
-
- The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
- Each version is given a distinguishing version number. If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation. If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
- If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
- Later license versions may give you additional or different
-permissions. However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
- 15. Disclaimer of Warranty.
-
- THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
- 16. Limitation of Liability.
-
- IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
- 17. Interpretation of Sections 15 and 16.
-
- If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
- If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
- <program> Copyright (C) <year> <name of author>
- This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
- You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
-
- The GNU General Public License does not permit incorporating your program
-into proprietary programs. If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library. If this is what you want to do, use the GNU Lesser General
-Public License instead of this License. But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
+++ /dev/null
-2011-12-17 Reuben Thomas <rrt@sc3d.org>
-
- * gnulib: Update.
- * .bzrignore: Add.
- * .cvsignore: Remove.
- * contrib/.cvsignore: Likewise.
- * doc/.cvsignore: Likewise.
- * man/.cvsignore: Likewise.
- * po/.cvsignore: Likewise.
- * src/.cvsignore: Likewise.
- * tests/.cvsignore: Likewise.
- * build/mkinstalldirs: Remove: no longer needed.
- * po: Update.
-
-2011-10-27 Reuben Thomas <rrt@sc3d.org>
-
- * doc/hello.texi: Small whitespace fix from Patrice Dumas.
-
-2011-03-22 gettextize <bug-gnu-gettext@gnu.org>
-
- * gnulib/m4/gettext.m4: Upgrade to gettext-0.18.1.
- * gnulib/m4/iconv.m4: Upgrade to gettext-0.18.1.
- * gnulib/m4/lib-ld.m4: Upgrade to gettext-0.18.1.
- * gnulib/m4/lib-link.m4: Upgrade to gettext-0.18.1.
- * gnulib/m4/lib-prefix.m4: Upgrade to gettext-0.18.1.
- * gnulib/m4/nls.m4: Upgrade to gettext-0.18.1.
- * gnulib/m4/po.m4: Upgrade to gettext-0.18.1.
- * gnulib/m4/progtest.m4: Upgrade to gettext-0.18.1.
- * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.18.1.
-
-2010-09-06 Karl Berry <karl@gnu.org>
-
- * README-dev: gnulib-tool invocation would now be --add-import.
- From Bruno.
-
-2010-04-07 Karl Berry <karl@gnu.org>
-
- * Version 2.6.
-
-2010-04-05 Karl Berry <karl@gnu.org>
-
- * build-aux/srclist.txt: new file, input to (Gnulib's) srclist-update.
-
-2010-02-26 Karl Berry <karl@gnu.org>
-
- * configure.ac (AM_INIT_AUTOMAKE): enable dist-xz.
-
-2010-02-26 gettextize <bug-gnu-gettext@gnu.org>
-
- * gnulib/m4/gettext.m4: Upgrade to gettext-0.17.
- * gnulib/m4/iconv.m4: Upgrade to gettext-0.17.
- * gnulib/m4/lib-ld.m4: Upgrade to gettext-0.17.
- * gnulib/m4/lib-link.m4: Upgrade to gettext-0.17.
- * gnulib/m4/lib-prefix.m4: Upgrade to gettext-0.17.
- * gnulib/m4/nls.m4: Upgrade to gettext-0.17.
- * gnulib/m4/po.m4: Upgrade to gettext-0.17.
- * gnulib/m4/progtest.m4: Upgrade to gettext-0.17.
- * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17.
-
-2010-02-07 Karl Berry <karl@gnu.org>
-
- * Version 2.5.
-
-2010-01-31 Karl Berry <karl@gnu.org>
-
- * pretest version 2.4.90.
-
- * gnulib/m4/gnulib-cache.m4 (gl_MODULES): explicitly remove getopt,
- since it has been declared obsolete.
- gnulib-tool --import getopt-gnu. Other gnulib updates.
-
-2009-01-01 Karl Berry <karl@gnu.org>
-
- * Makefile.am (wwwdoc, email): pass --email to gendocs.sh.
-
-2008-12-14 Karl Berry <karl@gnu.org>
-
- * Makefile.am (wwwdoc): doc fix.
-
-2008-12-09 Karl Berry <karl@gnu.org>
-
- * Version 2.4.
-
-2008-11-28 Karl Berry <karl@tug.org>
-
- * pretest version 2.3.92.
-
-2008-11-27 Karl Berry <karl@gnu.org>
-
- * Makefile.am, and all other source files: use new GPLv3 notice
- without physical FSF address.
-
-2008-11-07 Karl Berry <karl@tug.org>
-
- * pretest version 2.3.91.
-
-2008-02-26 Karl Berry <karl@gnu.org>
-
- * autogen.sh: autoconf before autoheader, per autoreconf.
-
-2007-07-26 Karl Berry <karl@gnu.org>
-
- * configure.ac (AC_INIT_AUTOMAKE): let's skip dist-bzip2.
-
-2007-06-29 Karl Berry <karl@gnu.org>
-
- * Version 2.3.
-
-2007-06-26 Karl Berry <karl@gnu.org>
-
- * pretest version 2.2.90.
-
-2006-11-23 Karl Berry <karl@gnu.org>
-
- * Version 2.2.
-
- * Makefile.am (po-check): add utility target (from coreutils).
-
-2006-11-09 Karl Berry <karl@gnu.org>
-
- * pretest version 2.1.96.
-
-2006-11-08 Karl Berry <karl@gnu.org>
-
- * pretest version 2.1.95.
- * configure.ac (AM_GNU_GETTEXT_VERSION): bump to 0.16.
- update gnulib, too.
- * gnulib/lib/.cvsignore: ignore .deps.
-
-2006-10-18 Karl Berry <karl@gnu.org>
-
- * pretest version 2.1.94.
-
-2006-10-15 Bob Proulx <bob@proulx.com> (tiny change)
-
- Remove trailing whitespace from files.
- Using 'diff -w' afterward shows no changes.
- * AUTHORS: Run Emacs function 'nuke-trailing-whitespace' on file.
- * ChangeLog.O: Likewise.
- * ChangeLog: Likewise.
- * Makefile.am: Likewise.
- * NEWS: Likewise.
- * THANKS: Likewise.
- * doc/ChangeLog: Likewise.
- * doc/Makefile.am: Likewise.
- * doc/hello.texi: Likewise.
- * man/ChangeLog: Likewise.
- * man/Makefile.am: Likewise.
- * po/POTFILES.in: Likewise.
- * src/ChangeLog: Likewise.
- * src/Makefile.am: Likewise.
- * src/hello.c: Likewise.
- * tests/greeting-1: Likewise.
- * tests/greeting-2: Likewise.
- * tests/hello-1: Likewise.
- * tests/traditional-1: Likewise.
-
-2006-10-15 Karl Berry <karl@gnu.org>
-
- * pretest version 2.1.93.
-
- * tests/*: try to remove \r from the output, so as not to fail on
- Windows systems.
-
-2006-08-28 Bruno Haible <bruno@clisp.org>
-
- * configure.ac: Set HELP2MAN to a dummy when cross-compiling.
-
-2006-08-23 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> (tiny change)
-
- * configure.ac (AC_CONFIG_FILES): Drop backslashes.
-
- * Makefile.am (diff): Do not use `echo -e'.
-
-2006-08-23 Karl Berry <karl@gnu.org>
-
- * Pretest version 2.1.92.
-
-2006-08-20 Karl Berry <karl@gnu.org>
-
- * Pretest version 2.1.91.
-
-2006-08-13 gettextize <bug-gnu-gettext@gnu.org>
-
- * gnulib/m4/longlong.m4: Upgrade to gettext-0.15.
- * gnulib/m4/ulonglong.m4: Upgrade to gettext-0.15.
- * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.15.
-
-2006-08-09 Karl Berry <karl@gnu.org>
-
- * configure.ac (AC_PROG_RANLIB): not needed, it's done in gl_EARLY.
- From Bruno.
-
-2006-07-16 Karl Berry <karl@gnu.org>
-
- * configure.ac (AC_HEADER_STDC): autoconf doc says no longer needed.
-
- * configure.ac (AM_INIT_AUTOMAKE): remove check-news.
- * Makefile.am (EXTRA_DIST): no more bugs; simplfy other ex
-
-2006-05-08 Karl Berry <karl@gnu.org>
-
- * autogen.sh: rename from bootstrap and change msg.
- Suggestion from Bruno Haible.
-
-2006-02-14 Karl Berry <karl@gnu.org>
-
- * configure.ac (gl_SOURCE_BASE,gl_M4_BASE): delete, these are
- passed only on the cmdline now (and cached).
-
-2005-05-28 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.am (EXTRA_DIST): Add build-aux/mkinstalldirs.
- * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.14.5.
-
-2005-04-23 Karl Berry <karl@gnu.org>
-
- * po/Makevars (MSGID_BUGS_ADDRESS): change to bug-hello@gnu.org.
-
- * src/hello.c (locale.h): unconditionally include, everything has
- this now.
- * m4/Makefile.am: remove, no longer needed.
- * intl/*: remove, we'll use [external] gettext.
- * configure.ac (AC_FUNC_ALLOCA): add.
- (AC_CONFIG_FILES): no m4 or intl.
- * Makefile.am (SUBDIRS): no m4 or intl.
-
-2005-03-27 gettextize <bug-gnu-gettext@gnu.org>
-
- * configure.ac (AC_CONFIG_FILES): Add intl/Makefile.
-
-2005-03-20 Karl Berry <karl@gnu.org>
-
- * README, README-alpha, NEWS, THANKS, AUTHORS: text updates.
- * README.dev: new file.
-
-2004-05-16 Karl Eichwalder <ke@gnu.franken.de>
-
- * configure.ac (AM_GNU_GETTEXT_VERSION): Add.
-
-2002-07-20 Karl Eichwalder <keichwa@gmx.net>
-
- * Makefile.am (DISTCLEANFILES): New variable, add stamp-h created
- by configure.
-
- * Upgrade to gettext-0.11.3.
- * Upgrade to autoconf-2.53b.
- * Upgrade to automake-1.6.2.
-
- * configure.ac: 2.1.2, ke_PRE: 2.1.1.
-
-2002-06-09 Karl Eichwalder <keichwa@gmx.net>
-
- * Release 2.1.1.
-
-2002-06-08 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.ac (AC_INIT): Replace use of the zero-arg form of
- AC_INIT with a use of the 3-arg form.
- * configure.ac (AM_INIT_AUTOMAKE): Use zero-arg form of this
- macro.
-
- * configure.ac: 2.1.1, ke_PRE: 2.1.0.
-
-2002-05-22 Karl Eichwalder <keichwa@gmx.net>
-
- * Release 2.1.0.
-
-2002-05-25 Karl Eichwalder <ke@gnu.franken.de>
-
- * configure.ac: Set official bug report address.
- * configure.ac: 2.1.0, ke_PRE: 2.0.60.
- * README-alpha: Remove on account of the official release.
-
-2002-05-22 Karl Eichwalder <keichwa@gmx.net>
-
- * Run 'gettextize --intl -f -c' (GNU gettext 0.11.2) to update
- files provided by gettext.
-
- * Run aclocal and automake (1.6.1).
- Reported by Paul Eggert.
-
- * configure.ac: 2.0.60, ke_PRE: 2.0.50.
-
-2002-02-02 Karl Eichwalder <keichwa@gmx.net>
-
- * Release 2.0.50.
-
-2002-02-02 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.ac (ALL_LINGUAS): Move contents to po/LINGUAS and
- delete it.
-
-2002-02-02 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.ac: 2.0.50, ke_PRE: 1.3.37.
-
-2002-01-31 Karl Eichwalder <keichwa@gmx.net>
-
- * Release 1.3.37.
-
- * Run 'gettextize --intl -f -c' (GNU gettext 0.11) to update
- files provided by gettext.
-
- * configure.ac: remove superfluous comment (AC_OUTPUT).
-
-2002-01-27 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.ac: 1.3.37.
-
-2002-01-25 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.ac: 1.3.36.
-
- * configure.ac (AC_PREREQ): 2.52.
- * Makefile.am (AUTOMAKE_OPTIONS): Require 1.5.
- * Makefile.am (EXTRA_DIST): Add config.rpath.
-
-2002-01-25 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.am (SUBDIRS): Add m4.
- (ACLOCAL_AMFLAGS): New variable.
- (EXTRA_DIST): Add config.rpath.
- * configure.ac (AC_OUTPUT): Add m4/Makefile.
-
-2001-10-08 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.ac (All_LINGUAS): Add 'hu'.
-
-2001-08-11 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.ac: 1.3.34, ke_PRE: 1.3.33.
-
- * Release 1.3.33.
-
-2001-07-31 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.ac (ALL_LINGUAS): Drop 'no'; add 'nb' and 'nn'.
-
-2001-07-27 Karl Eichwalder <keichwa@gmx.net>
-
- * Makefile.am (AUTOMAKE_OPTIONS): Add 'dist-bzip2'.
-
- * configure.ac (ke_PRE): Set pre-version number here.
- * Makefile.am (ke_PRE): Use it.
-
- * Run 'gettextize -f -c' to update the intl directory (GNU
- gettext 0.10.39).
-
-2001-07-02 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.ac: Use AM_CONFIG_HEADER instead of
- AC_CONFIG_HEADERS.
- From Tom Tromey.
- * Makefile.am (EXTRA_DIST): Using AM_CONFIG_HEADER it isn't needed
- to list config.h.in.
-
-2001-06-23 Karl Eichwalder <keichwa@gmx.net>
-
- * Makefile.am (diff): Exclude aclocal.m4.
-
- * configure.ac: 1.3.33.
- * Makefile.am (ke_PRE): 1.3.32
-
-2001-06-23 Karl Eichwalder <keichwa@gmx.net>
-
- * Release 1.3.32.
-
- * configure.ac: Rename configure.in.
-
- * configure.in (AC_CONFIG_FILES): Using gettext.m4 from cvs it
- isn't needed to treat po/Makefile.in special.
-
- * configure.in: Provide PACKAGE_BUGREPORT.
-
- * configure.in: AM_INIT_AUTOMAKE third argument prevents PACKAGE
- and VERSION to defined.
-
- * Makefile.am (EXTRA_DIST): Add config.h.in to work around a
- automake 1.4-p4 problem.
-
- * configure.in: AC_CONFIG_HEADERS instead of AM_CONFIG_HEADER.
-
-2001-06-08 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in: Run autoupdate from Autoconf 2.50.
-
-2001-06-04 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in: Add 'gl'.
-
-2001-06-02 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in: 1.3.32.
- * Makefile.am (ke_PRE): 1.3.31
-
- * Release 1.3.30.
-
- * configure.in (ALL_LINGUAS): Add 'tr'.
-
-2001-05-29 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in (ALL_LINGUAS): Add 'uk'.
-
-2001-05-24 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in: 1.3.31.
- * Makefile.am (ke_PRE): 1.3.30
-
- * Release 1.3.30.
-
- * Run 'gettextize -f -c' to update the intl directory (GNU
- gettext 0.10.38).
-
- * configure.in: 1.3.30.
- * Makefile.am (ke_PRE): 1.3.29
-
-2001-05-21 Karl Eichwalder <keichwa@gmx.net>
-
- * Release 1.3.29.
-
- * acconfig.h: General cleanup: HAVE_LC_MESSAGES, ENABLE_NLS,
- HAVE_CATGETS, HAVE_GETTEXT, and HAVE_STPCPY are provided by
- gettext.m4 since gettext-0.10.36 (Bruno Haible).
-
- * Remove ltconfig and ltmain.sh (Bruno Haible).
-
-2001-05-16 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in (ALL_LINGUAS): Add 'eo'.
-
-2001-05-01 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in: 1.3.29.
- * Makefile.am (ke_PRE): 1.3.28
-
-2001-05-01 Karl Eichwalder <keichwa@gmx.net>
-
- * Release 1.3.28.
-
-2001-04-28 Karl Eichwalder <keichwa@gmx.net>
-
- * Run 'gettextize -f -c' to update the intl directory (GNU
- gettext 0.10.37); 'rm aclocal.m4'.
-
-2001-04-02 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in: 1.3.28.
- * Makefile.am (ke_PRE): 1.3.27.
-
-2001-03-31 Karl Eichwalder <keichwa@gmx.net>
-
- * Release 1.3.27.
-
- * README-alpha: Update.
-
- * Run 'gettextize -f -c' to update the intl directory (GNU
- gettext 0.10.36); 'rm aclocal.m4'.
-
-2001-03-23 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in: Remove old test frame work.
-
-2001-03-19 Karl Eichwalder <keichwa@gmx.net>
-
- * Run 'rm Makefile.in */Makefile.in'.
- * Run 'libtoolize --force' to acquire config.{guess,sub}.
- * Run 'gettextize -f -c' to update the intl directory (GNU
- gettext 0.10.36pre); 'rm aclocal.m4'.
-
-2000-11-18 Karl Eichwalder <keichwa@gmx.net>
-
- * configure.in (ALL_LINGUAS): Add de_DE.
-
-2000-06-06 Karl Eichwalder <ke@gnu.franken.de>
-
- * configure.in: 1.3.27
- * Makefile.am (ke_PRE): 1.3.26.
- * configure.in (ALL_LINGUAS): Add fi.
-
-2000-03-13 Karl EICHWALDER <ke@gnu.franken.de>
-
- * configure.in: 1.3.26.
- * Makefile.am (ke_PRE): 1.3.25.
-
- * m4/: New directory.
-
-2000-02-16 Karl EICHWALDER <ke@gnu.franken.de>
-
- * configure.in (ALL_LINGUAS): Add et.
-
-1999-11-17 Karl EICHWALDER <ke@gnu.franken.de>
-
- * configure.in (ALL_LINGUAS): Add id.
-
-1999-10-23 Karl Eichwalder <ke@gnu.franken.de>
-
- * configure.in: 1.3.25.
- * Makefile.am (ke_PRE): 1.3.24.
-
- * configure.in (ALL_LINGUAS): Add ja.
-
-1999-10-02 Karl Eichwalder <ke@gnu.franken.de>
-
- * configure.in (ALL_LINGUAS): Add lv.
-
-1999-08-21 Karl Eichwalder <ke@gnu.franken.de>
-
- * Release 1.3.24.
-
- * Makefile.am (ke_PRE): 1.3.23.
- * configure.in: 1.3.24.
-
- * configure.in (AC_OUTPUT): Add man/Makefile.
- (AC_CHECK_PROG): Check for perl (for help2man).
-
- * Makefile.am (SUBDIRS): add `man' (after `src'!).
-
- * man/: Create new directory for the manpage.
-
-1999-08-15 Karl Eichwalder <ke@gnu.franken.de>
-
- * configure.in (ALL_LINGUAS): Add pt_BR.
-
-1999-07-28 Karl Eichwalder <ke@gnu.franken.de>
-
- * Release 1.3.23 - no changes, but increase the version number as
- necessary.
- * Makefile.am (ke_PRE): 1.3.22.
- * configure.in: 1.3.23.
-
-1999-07-13 Karl Eichwalder <ke@gnu.franken.de>
-
- * Release 1.3.22.
-
-1999-07-12 Karl Eichwalder <ke@gnu.franken.de>
-
- * contrib/ChangeLog: New file.
-
- * Makefile.am (SUBDIRS): Add `contrib'.
-
- * contrib/: Create new directory -- is there any GNU program
- without a contrib directory? `GNU hello' mised it for so long...
- (Idea by François Pinard <pinard@iro.umontreal.ca>, thanks!).
-
- * configure.in (ALL_LINGUAS): Add `el' and `sk'.
-
-1999-01-31 Karl Eichwalder <ke@suse.de>
-
- * configure.in: (AC_PREREQ): automake-1.4 needs 2.13.
-
-1999-01-31 Karl Eichwalder <ke@suse.de>
-
- * configure.in: (VERSION): 1.3.22; now, I'm using automake-1.4 and
- autoconf-2.13.
-
- * Makefile.am (ke_PRE): 1.3.21.
-
- * INSTALL: Renewed from automake-1.4.
- * install-sh: Ditto
- * missing: Ditto.
- * mkinstalldirs: Ditto.
-
-1998-12-12 Karl Eichwalder <ke@suse.de>
-
- * configure.in: (VERSION): 1.3.21.
- * Makefile.am (ke_PRE): 1.3.20.
-
- * Makefile.am (pot-to-trans): Add.
-
-1998-12-11 Karl Eichwalder <ke@suse.de>
-
- * configure.in: (VERSION): 1.3.20).
- * Makefile.am (ke_PRE): 1.3.19.
- * configure.in (ALL_LINGUAS): Add `ru'.
-
-1998-06-15 Karl Eichwalder <ke@suse.de>
-
- * configure.in: (VERSION): 1.3.19.
- * Makefile.am (ke_PRE): 1.3.18.
- * configure.in (ALL_LINGUAS): Add `it'.
-
-1998-05-02 Karl Eichwalder <ke@suse.de>
-
- * configure.in: (VERSION): 1.3.18.
- * Makefile.am (ke_PRE): 1.3.16.
- (AUTOMAKE_OPTIONS): require automake 1.3.
-
- * configure.in: Remove commands in AC_OUTPUT; now it's in the
- AM_GNU_GETTEXT macro.
- * configure.in (AC_LINK_FILES): remove it; now it's in the
- AM_GNU_GETTEXT macro.
-
- * Run `gettextize -f -c' to update all the files from the GNU
- gettext library (0.10.35); rm aclocal.m4 and
- * use automake 1.3 to build m4 files and Makefiles.
-
-1998-04-30 Karl Eichwalder <ke@suse.de>
-
- * configure.in (ALL_LINGUAS): Add da.
-
-1998-04-05 Karl Eichwalder <ke@suse.de>
-
- * configure.in: (VERSION): 1.3.16.
- * Makefile.am (ke_PRE): 1.3.15
- * use automake 1.2h.
-
-1998-04-04 Karl Eichwalder <ke@suse.de>
-
- * configure.in: (VERSION): 1.3.15.
- * Makefile.am (ke_PRE): 1.3.14
-
-1998-02-28 Karl Eichwalder <ke@suse.de>
-
- * configure.in: (VERSION): 1.3.14.
- * Makefile.am (ke_PRE): 1.3.13.
- * use automake 1.2f.
-
-1998-02-14 Karl Eichwalder <ke@suse.de>
-
- * configure.in (VERSION): 1.3.13.
- * configure.in: Remove AC_PROG_RANLIB.
-
- * Makefile.am (ke_PRE): 1.3.12.
-
- * Run `gettextize -f -c' to update all the files from the GNU
- gettext library (0.10.32); run aclocal to update aclocal.m4.
-
- * Makefile.am (AUTOMAKE_OPTIONS): require automake 1.2; actually
- use automake 1.2e.
-
-Sun May 25 18:49:14 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * ABOUT-NLS: Update from ftp://ftp.gnu.ai.mit.edu/pub/gnu/.
-
- * Makefile.am (diffcheck): Try to extract the archives.
-
- * Switch to automake-1.1p. Update COPYING, INSTALL, install-sh,
- missing, and mkinstalldirs.
-
-Mon Apr 21 21:33:50 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * Switch to automake-1.1n and use all files and scripts coming
- with it (INSTALL, mkinstalldirs, etc.).
-
-Wed Mar 26 08:40:36 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (AC_ARG_PROGRAM): Delete; done by AM_INIT_AUTOMAKE.
-
- * Makefile.am (AUTOMAKE_OPTIONS): Use `gnits' to make DIST_ALPHA
- work. Remove all other related DIST_ALPHA stuff.
- (MAINT_CHARSET): `latin1'.
-
-Sun Mar 23 08:18:29 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (AC_PREREQ): Delete; automake knows it better.
-
-Sat Mar 22 09:06:57 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in: Add AC_PROG_RANLIB.
-
-Fri Mar 21 16:44:11 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * missing: New file from automake-1.1m.
-
-Sat Feb 22 18:29:57 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * acconfig.h: Add #undef HAVE_STPCPY.
-
-Sat Jan 25 16:51:31 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (VERSION): 1.3.10.
-
-Fri Jan 17 10:46:59 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (diff): Exclude rebuildable files. Tell how to
- rebuild them.
-
-Wed Jan 8 16:29:06 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (ke_PRE): New Variable
- (diffcheck, diff): New targets.
-
- * configure.in: Provide a mechanism to include `README-alpha' in
- alpha releases (stolen from gettext-0.10.26, but broken with
- automake-1.1l).
- (AC_SUBST): Add DIST_ALPHA.
-
- * README: Reflect the number of the upcoming version (1.4).
-
- * Makefile.am (my-dist): new target to archive the best
- compression ratio.
-
-Sun Jan 5 10:04:07 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (VERSION): 1.3.9.
-
-Sat Jan 4 10:23:55 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (AC_OUTPUT): Add extra command
- `chmod +x tests/hello'; reported by Kaveh R. Ghazi
- <ghazi@caip.rutgers.edu>.
-
-Thu Jan 2 18:40:02 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (AC_OUTPUT): Add `tests/hello'.
- (VERSION): 1.3.8.
-
-Mon Dec 30 17:21:04 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (EXTRA_DIST): Remove `INSTALL-1.3'.
-
- * configure.in (AC_OUTPUT): Add `tests/Makefile'.
- (AC_PROG_MAKE_SET, AC_PROG_INSTALL): Delete.
-
- * Makefile.am (SUBDIRS): Add `tests'.
-
- * tests/: New directory.
-
-Sun Dec 29 11:50:08 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (AC_FUNC_ALLOCA): instead of the old ALLOCA.
-
-Wed Dec 18 15:39:26 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (VERSION): 1.3.7.
-
-Mon Dec 16 21:03:13 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (AC_HAVE_HEADERS): Some systems need sys/param.h,
- reported by Kaveh R. Ghazi <ghazi@caip.rutgers.edu>.
-
- * acconfig.h: include <libintl.h>, reported by Kaveh R. Ghazi
- <ghazi@caip.rutgers.edu>.
-
-Thu Dec 12 18:58:01 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (ALL_LINGUAS): remove `it'.
-
-Wed Dec 11 19:45:49 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (ALL_LINGUAS): add es ko nl no pl pt sl sv.
-
- * `mv aclocal.m4 acinclude.m4', and run aclocal from
- automake-1.1l.
-
-Sat Dec 7 14:23:44 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in: AC_PREREQ(2.12), add AM_INIT_AUTOMAKE, delete
- PACKAGE and VERSION and related opperations, now covered by
- AM_INIT_AUTOMAKE.
-
- * Run `gettextize -f -c' to update all the files from the GNU
- gettext library (0.10.26).
-
-Thu Dec 5 17:51:48 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (EXTRA_DIST): add ChangeLog.O.
-
- * configure.in (VERSION): 1.3.6.
-
-Wed Dec 4 19:06:42 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am: new file.
- (SUBDIRS, EXTRA_DIST): define.
-
- * aclocal.m4: new internationalization macros.
-
- * Makefile.in (SUBDIRS): add intl/ and po/ literary, remove
- @INTLSUB@ and @POSUB@.
-
- * configure.in AM_GNU_GETTEXT replaces ud_GNU_GETTEXT.
-
- * Run `gettextize -f -c' to update all the files from the GNU
- gettext library (0.10.25).
-
-Sat Nov 30 17:41:51 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (VERSION): 1.3.5.
-
-Fri Mar 15 12:38:17 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (ALL_LINGUAS): Add fr.
-
-Tue Aug 6 11:58:19 1996 Kjetil Wiekhorst J|rgensen <jorgens@voldsboks.pvv.ntnu.no>
-
- * configure.in: Added check for st_blksize in 'struct stat'.
-
- * config.h.in: Added HAVE_ST_BLKSIZE.
-
- * system.h: new file, define macro ST_BLKSIZE and DEV_BSIZE.
-
- * hello.c: Use ST_BLKSIZE instead of st_blksize. Use the system.h
- headerfile.
-
-
-Tue Mar 12 09:57:19 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * make dist: 1.3.4, test release for alpha.gnu.ai.mit.edu.
-
- * INSTALL: New file from autoconf-2.8.
-
- * Makefile.in (fix-permissions perm): Add.
-
-Sun Mar 10 13:13:03 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (VERSION) 1.3.4. (AC_ISC_POSIX) add,
- (AC_PREREQ) now 2.8; (AC_PROG_CPP) delete.
-
- * make dist: 1.3.3; internal release.
-
- * aclocal.m4: ud_LC_MESSAGES, ud_WITH_NLS and ud_GNU_GETTEXT from
- gettext-0.10.6.
-
- * Run `gettextize -f' to update all the files from the GNU gettext
- library (now using version 0.10.6).
-
-Tue Mar 5 14:39:39 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.in (DISTFILES): Add ChangeLog.O.
-
- * ChangeLog.O: News file. Contains the ChangeLog entries from the
- versions 1.0-1.3
-
- * configure.in (VERSION): 1.3.3.
-
-Sun Mar 3 12:00:07 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (VERSION): 1.3.2.
-
-Wed Dec 20 16:50:34 1995 Karl Eichwalder <keichwa@.gwdg.de>
- * make dist 1.3-ki.
- * configure.in (VERSION): 1.3-ki.
-
- * Makefile.in (DISTFILES): Add `config.h.in'.
-
-Wed Dec 20 09:42:02 1995 Karl Eichwalder <ke@ke.Central.DE>
-
- * make dist 1.3-kh.
- * configure.in (VERSION): 1.3-kh.
-
- * THANKS-ke: New file.
-
-Tue Dec 19 13:38:58 1995 Karl Eichwalder <ke@ke.Central.DE>
-
- * ChangeLog: Remove Local Variables List.
-
-Mon Dec 18 16:34:14 1995 Karl Eichwalder <ke@ke.Central.DE>
-
- * configure.in (ALL_OUPUT): Add doc/Makefile and src/Makefile.
-
- * doc: Move gpl.texinfo, hello.info, hello.texi, and texinfo.tex
- to new directory `doc'.
-
- * src: Move Makefile.in, TAGS, alloca.c, getopt.c, getopt.h,
- getopt1.c, hello.c, testdata, and version.c to new directory
- `src'.
-
-Sat Dec 16 00:00:41 1995 Karl Eichwalder <ke@ke.Central.DE>
-
- * texinfo.tex: Include version 2.150.
-
- * Makefile.in (install): Use install-info if available.
- (clean): Add `*~ and `\#*'.
- (configure, config.h, stamp-h, config.h.in, stamp-h.in): New
- targets for autoconf.
-
- * hello.c (main), version.c (version): Use `N_(...)' tag instead
- of `gettext_noop'.
-
- * acconfig.h (N_): Rename `gettext_noop'.
-
-Fri Dec 15 11:03:27 1995 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.texi: Add INFO-DIR-ENTRY.
-
- * Pre-Release Version 1.3-ke.
-
- * Makefile.in (check): Add `@unset LANG'. Okay???
-
- * INSTALL: file from version 1.3 saved as INSTALL-1.3. New file
- from autoconf-2.7.
-
- * Makefile.in: Remove first line entry (Indented-Text).
- (SUBDIRS): Added variable.
- (dist dist-hello): Renewed according to gettext-0.10.
- (CFLAGS, LDFLAGS): Replacable.
-
- * install-sh: Added.
-
- * acconfig.h: New file. HAVE_LC_MESSAGES, ENABLE_NLS,
- HAVE_CATGETS, and HAVE_GETTEXT stolen from gettext-0.10. Define
- _(...) and gettext_noop(...). Insert @TOP@ and @BOTTOM@. Add
- HAVE_STPCPY.
-
- * aclocal.m4: New file. `ud_LC_MESSAGES', `ud_WITH_NLS' and
- `ud_GNU_GETTEXT' stolen from gettext-0.10.
-
- * configure.in (PACKAGE, VERSION, ALL_LINGUAS, ud_GNU_GETTEXT,
- LINK_FILES): Add i18n and gettext related macros.
- (CONFIG_HEADER): config.h.
- (PREREQ): 2.5.
- (PROG_MAKE_SET): Added.
- (OUTPUT): Add `intl/Makefile', `po/Makefile.in', and a `sed'
- command to postprocess `po/Makefile.in'
-
- * TODO: New file.
-
- * version.c hello.c: Add i18n support: include "config.h",
- <locale.h>, and <libintl.h>. Tag translatable strings with
- `_(...)' and `gettext_noop (...)', defined in `config.h'.
-
- * config.h: New file, for the sake of i18n.
-
- * hello.c (main): Add i18n support: new functions `setlocale ()',
- `bindtextdomain ()', and `textdomain ()',
-
- * run `gettextize -f' to get the i18n skeleton: Add `ABOUT-NLS'
- from gettext-0.10, also the directories `intl/' and `po/'; fill
- `intl/' with needed files from the gettext-0.10 package.
-
-Thu Jul 29 14:31:18 1993 Charles Hannum (mycroft@trinity.gnu.ai.mit.edu)
-
- * hello.c (main): Add /var/mail to default list of directories.
- Don't loop forever if one of the files is not found.
-
- * Makefile (check): Check some more cases.
- testdata: Add sample output for new test cases.
-
-
-Copyright 1993, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-2004, 2005, 2006, 2008 Free Software Foundation, Inc.
-
-Copying and distribution of this file, with or without modification, are
-permitted in any medium without royalty provided the copyright notice
-and this notice are preserved.
+++ /dev/null
-Sat May 22 20:36:28 1993 The King (elvis@graceland.gnu.ai.mit.edu)
-
- * Version 1.3 released.
-
- * Makefile.in (DISTFILES): Add hello.?? and hello.??s.
- (dist): Use tar's o flag to make compatible archives.
-
- * hello.c (main): Exit with 0, not 1, under -h and -v.
-
- * Makefile.in (DISTFILES): Add mkinstalldirs.
-
- * Makefile.in (binprefix): New variable.
- (install): Use it.
-
- * Makefile.in (all): Don't depend on info.
-
-Fri May 21 20:04:14 1993 The King (elvis@graceland.gnu.ai.mit.edu)
-
- * Version 1.2 released.
-
-Wed May 19 21:54:02 1993 The King (elvis@graceland.gnu.ai.mit.edu)
-
- * hello.c: Insert standard alloca #ifdef spooge.
-
- * hello.c: Include <errno.h> and declare errno.
- (main): Don't assume getenv ("USER") works. If it
- fails, use getpwuid (getuid ()).
- Don't hard-code /usr/spool/mail. New static variable DIRS
- lists directories to try. When MAILNAME is nil, run through
- there until we find one that exists.
-
- * hello.c (progname): New static variable.
- (main): Set it to ARGV[0]. Use it in error message fprintfs.
- (xmalloc): New function.
-
- * hello.c [HAVE_FCNTL_H]: Include <fcntl.h>.
- [HAVE_SYS_FILE_H]: Protect #include <sys/file.h> with this.
- * configure.in (AC_HAVE_HEADERS): Check for fcntl.h and sys/file.h.
-
- * hello.c (main): Under -v, exit after printing version info,
- unless also under -h.
-
- * hello.c [HAVE_STRING_H]: Include <string.h> for strcmp.
- [! HAVE_STRING_H]: Include <strings.h> instead.
- * configure.in: Use AC_HAVE_HEADERS to check for string.h.
-
- * Makefile.in (Makefile): Use $(SHELL) to run config.status.
-
- * testdata: Updated capitalization and punctuation.
-
- * Makefile.in (all): Depend on info, not hello.info.
- (info, dvi): New targets.
- (.c.o): Put $(CFLAGS) last.
- (install): Depend on hello and hello.info, not on all.
- (all, install, check, clean, mostlyclean, distclean,
- realclean, dist): Declare as phony targets.
- (configure): Target removed.
- (srcdir): Set to $(VPATH), not @srcdir@.
- (MAKEINFO, TEXI2DVI): New variables.
- (hello.info, hello.dvi): Use them.
- (clean): Remove hello.dvi hello.?? hello.??s.
- (realclean): Remove hello.info*.
- (installdirs): New target.
- (install): Depend on it first.
- (dist): Create a .z file instead of a .Z file.
-
-Mon Nov 9 18:38:08 1992 Michael I Bushnell (mib@geech.gnu.ai.mit.edu)
-
- * hello.c (main): added mail-printing feature.
-
-Wed Sep 16 19:30:08 1992 The King (elvis@graceland.gnu.ai.mit.edu)
-
- * Version 1.1 released.
-
- * Makefile.in (DISTFILES): Add TAGS.
-
- * Makefile.in (DISTFILES): Remove COPYING.LIB.
- * COPYING.LIB: Removed.
-
- * hello.c (main): Shortened verbose variable name.
- Robustified and simplified argument test.
-
-Wed Sep 2 23:45:10 1992 Noah Friedman (friedman@nutrimat.gnu.ai.mit.edu)
-
- * hello.c (main): added zork output compatibility.
-
-Wed Sep 2 22:58:15 1992 The King (elvis@graceland.gnu.ai.mit.edu)
-
- * Makefile.in (config.status): Find configure in $(srcdir).
-
- * Makefile.in: Regularize spacing after colons.
-
-Tue Aug 11 16:48:21 1992 The King (elvis@graceland.gnu.ai.mit.edu)
-
- * NEWS: New file.
- * Makefile.in (DISTFILES): Add NEWS.
-
- * hello.c (usage): Capitalize first word.
-
- * Makefile.in (DISTFILES): Add COPYING.LIB.
-
-Wed Jul 1 02:43:47 1992 The King (elvis@graceland.gnu.ai.mit.edu)
-
- * Makefile.in (hello.dvi): New rule.
- (doc): New rule.
- (check): Depend on hello, not all.
-
- * hello.texi (Instructions): Add important warning to all our readers.
- (Sample): Show new greeting msg, and --traditional option.
- (Invoking hello): Document --traditional.
- (Problems): Invite users to ask questions of the maintainer.
-
- * hello.c (longopts, main): Add new option --traditional/-t.
- (main): When not under --traditional, use proper capitalization,
- appropriate punctuation, and the most suited output function.
- Under --traditional, retain compatibility with old implementations.
-
- * hello.c (main): Notice switches in flag variables and act on
- them after the getopt loop is finished.
-
- * ChangeLog (3-1-78): Correct name.
-
-Sun Jun 28 12:54:28 1992 The King (elvis@graceland.gnu.ai.mit.edu)
-
- * Makefile.in: Add emacs mode cookie.
- (DISTFILES): Indent contiuation lines reasonably.
-
- * hello.texi (Instructions): Properly capitalize title.
-
-Fri Jun 26 23:44:03 1992 Noah Friedman (friedman@nutrimat.gnu.ai.mit.edu)
-
- * hello.texi: new node "how to read this manual".
-
-Fri Jun 26 18:15:53 1992 David J. MacKenzie (djm@apple-gunkies.gnu.ai.mit.edu)
-
- * Makefile.in (check): Look for testdata in $(srcdir).
- From david d `zoo' zuhn (zoo@cygnus.com).
-
-Fri Jun 26 18:03:09 1992 Charles Hannum (mycroft@hill.gnu.ai.mit.edu)
-
- * hello.texi: Fix grammo in first line.
-
-Fri Jun 26 02:55:44 1992 The King (elvis@graceland.gnu.ai.mit.edu)
-
- * Version 1.0 released.
-
-Fri Jun 26 01:02:04 1992 David J. MacKenzie (djm@apple-gunkies.gnu.ai.mit.edu)
-
- * Makefile.in, configure.in, hello.texi: New files.
-
-Fri Jun 26 00:57:54 1992 Jan Brittenson (bson@kropotkin.gnu.ai.mit.edu)
-
- * hello.c (version): Declare it.
-
-Fri Jun 26 00:47:03 1992 Roland McGrath (roland@geech.gnu.ai.mit.edu)
-
- * hello.c (longopts, main): Add -h/--help option.
- [STDC_HEADERS]: #include <stdlib.h>
- [! STDC_HEADERS] (exit): Declare it.
-
-Fri Jun 26 00:44:27 1992 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
-
- * hello.c (longopts): New variable.
- (main): Use it.
-
-Fri Jun 26 00:43:46 1992 Mike Haertel (mike@churchy.gnu.ai.mit.edu)
-
- * version.c: New file.
-
-Thu Nov 24 00:00:01 1983 Richard M. Stallman (rms at prep)
-
- * Begin GNU project; add copyleft.
-
-Sat Apr 1 00:27:19 1978 Brian Kernighan (bwk at research)
-
- * Initial version.
-
-ChangeLog.O ends here
+++ /dev/null
-# Having a separate GNUmakefile lets me 'include' the dynamically
-# generated rules created via cfg.mk (package-local configuration)
-# as well as maint.mk (generic maintainer rules).
-# This makefile is used only if you run GNU Make.
-# It is necessary if you want to build targets usually of interest
-# only to the maintainer.
-
-# Copyright (C) 2001, 2003, 2006-2012 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# If the user runs GNU make but has not yet run ./configure,
-# give them a diagnostic.
-_gl-Makefile := $(wildcard [M]akefile)
-ifneq ($(_gl-Makefile),)
-
-# Make tar archive easier to reproduce.
-export TAR_OPTIONS = --owner=0 --group=0 --numeric-owner
-
-# Allow the user to add to this in the Makefile.
-ALL_RECURSIVE_TARGETS =
-
-include Makefile
-
-# Some projects override e.g., _autoreconf here.
--include $(srcdir)/cfg.mk
-
-# Allow cfg.mk to override these.
-_build-aux ?= build-aux
-_autoreconf ?= autoreconf -v
-
-include $(srcdir)/maint.mk
-
-# Ensure that $(VERSION) is up to date for dist-related targets, but not
-# for others: rerunning autoreconf and recompiling everything isn't cheap.
-_have-git-version-gen := \
- $(shell test -f $(srcdir)/$(_build-aux)/git-version-gen && echo yes)
-ifeq ($(_have-git-version-gen)0,yes$(MAKELEVEL))
- _is-dist-target ?= $(filter-out %clean, \
- $(filter maintainer-% dist% alpha beta stable,$(MAKECMDGOALS)))
- _is-install-target ?= $(filter-out %check, $(filter install%,$(MAKECMDGOALS)))
- ifneq (,$(_is-dist-target)$(_is-install-target))
- _curr-ver := $(shell cd $(srcdir) \
- && $(_build-aux)/git-version-gen \
- .tarball-version \
- $(git-version-gen-tag-sed-script))
- ifneq ($(_curr-ver),$(VERSION))
- ifeq ($(_curr-ver),UNKNOWN)
- $(info WARNING: unable to verify if $(VERSION) is the correct version)
- else
- ifneq (,$(_is-install-target))
- # GNU Coding Standards state that 'make install' should not cause
- # recompilation after 'make all'. But as long as changing the version
- # string alters config.h, the cost of having 'make all' always have an
- # up-to-date version is prohibitive. So, as a compromise, we merely
- # warn when installing a version string that is out of date; the user
- # should run 'autoreconf' (or something like 'make distcheck') to
- # fix the version, 'make all' to propagate it, then 'make install'.
- $(info WARNING: version string $(VERSION) is out of date;)
- $(info run '$(MAKE) _version' to fix it)
- else
- $(info INFO: running autoreconf for new version string: $(_curr-ver))
-GNUmakefile: _version
- touch GNUmakefile
- endif
- endif
- endif
- endif
-endif
-
-.PHONY: _version
-_version:
- cd $(srcdir) && rm -rf autom4te.cache .version && $(_autoreconf)
- $(MAKE) $(AM_MAKEFLAGS) Makefile
-
-else
-
-.DEFAULT_GOAL := abort-due-to-no-makefile
-srcdir = .
-
-# The package can override .DEFAULT_GOAL to run actions like autoreconf.
--include ./cfg.mk
-
-# Allow cfg.mk to override these.
-_build-aux ?= build-aux
-_autoreconf ?= autoreconf -v
-
-include ./maint.mk
-
-ifeq ($(.DEFAULT_GOAL),abort-due-to-no-makefile)
-$(MAKECMDGOALS): abort-due-to-no-makefile
-endif
-
-abort-due-to-no-makefile:
- @echo There seems to be no Makefile in this directory. 1>&2
- @echo "You must run ./configure before running 'make'." 1>&2
- @exit 1
-
-endif
-
-# Tell version 3.79 and up of GNU make to not build goals in this
-# directory in parallel, in case someone tries to build multiple
-# targets, and one of them can cause a recursive target to be invoked.
-
-# Only set this if Automake doesn't provide it.
-AM_RECURSIVE_TARGETS ?= $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) \
- dist distcheck tags ctags
-
-ALL_RECURSIVE_TARGETS += $(AM_RECURSIVE_TARGETS)
-
-ifneq ($(word 2, $(MAKECMDGOALS)), )
-ifneq ($(filter $(ALL_RECURSIVE_TARGETS), $(MAKECMDGOALS)), )
-.NOTPARALLEL:
-endif
-endif
+++ /dev/null
-Installation Instructions
-*************************
-
-Copyright (C) 1994-1996, 1999-2002, 2004-2012 Free Software Foundation,
-Inc.
-
- Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved. This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
- Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below. The lack of an optional feature in a given package is not
-necessarily a bug. More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
- The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
-
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package, generally using the just-built uninstalled binaries.
-
- 4. Type `make install' to install the programs and any data files and
- documentation. When installing into a prefix owned by root, it is
- recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
- privileges.
-
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
- this time using the binaries in their final installed location.
- This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
- root privileges, verifies that the installation completed
- correctly.
-
- 6. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
- 7. Often, you can also type `make uninstall' to remove the installed
- files again. In practice, not all packages have tested that
- uninstallation works correctly, even though it is required by the
- GNU Coding Standards.
-
- 8. Some packages, particularly those that use Automake, provide `make
- distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
- This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
- On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
-this:
-
- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CPP="gcc -E" CXXCPP="g++ -E"
-
- This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
- The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
- The first method involves providing an override variable for each
-affected directory. For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters. On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
- Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
- ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
- HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved. Use GNU `make'
-instead.
-
- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
-
- ./configure CC="cc"
-
-and if that doesn't work, try
-
- ./configure CC="cc -nodtk"
-
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
-
- ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS
- KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation. Until the limitation is lifted, you can use
-this workaround:
-
- CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
- Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
-
-`--no-create'
-`-n'
- Run the configure checks, but stop before creating any output
- files.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
+++ /dev/null
-# Process this file with automake to produce Makefile.in (in this,
-# and all subdirectories).
-# Makefile for the top-level directory of GNU hello.
-#
-# Copyright 1997, 1998, 2005, 2006, 2007, 2008, 2009, 2010, 2011
-# Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# Find gnulib headers.
-ACLOCAL_AMFLAGS = -I m4
-
-# Additional files to distribute.
-EXTRA_DIST = ChangeLog.O m4/gnulib-cache.m4
-
-# Subdirectories to descend into.
-SUBDIRS = contrib lib po src doc man tests
-
-# Verify that all source files using _() are listed in po/POTFILES.in.
-# The idea is to run this before making pretests, as well as official
-# releases, so that translators will be sure to have all the messages.
-# (From coreutils.)
-po-check:
- if test -f po/POTFILES.in; then \
- grep -E -v '^(#|$$)' po/POTFILES.in \
- | grep -v '^src/false\.c$$' | sort > $@-1; \
- files=; \
- for file in $$($(CVS_LIST_EXCEPT)) `find * -name '*.[ch]'`; do \
- case $$file in \
- djgpp/* | man/*) continue;; \
- esac; \
- case $$file in \
- *.[ch]) \
- base=`expr " $$file" : ' \(.*\)\..'`; \
- { test -f $$base.l || test -f $$base.y; } && continue;; \
- esac; \
- files="$$files $$file"; \
- done; \
- grep -E -l '\b(N?_|gettext *)\([^)"]*("|$$)' $$files \
- | sort -u > $@-2; \
- diff -u $@-1 $@-2 || exit 1; \
- rm -f $@-1 $@-2; \
- fi
-
-
-# Example of updating the online web pages for the documentation
-# with the gendocs.sh script; see
-# http://www.gnu.org/prep/maintain/html_node/Invoking-gendocs_002esh.html
-#
-gendocs = build-aux/gendocs.sh
-gendocs_envvars = GENDOCS_TEMPLATE_DIR=doc
-#
-manual = hello
-manual_title = "Hello, GNU World"
-email = bug-hello@gnu.org
-gendocs_args = --email $(email) $(manual) $(manual_title)
-#
-www_target = $(HOME)/gnu/www/hello/manual
-#
-doctemp = doc/wwwtemp
-wwwdoc:
- rm -rf $(doctemp) && mkdir $(doctemp)
- cd $(doctemp) \
- && ln -s ../*.texi . \
- && env $(gendocs_envvars) $(gendocs) $(gendocs_args)
- cp -arf $(doctemp)/manual/. $(www_target)
- ls -ltu $(www_target)/html_node | tail # $VCS rm -f obsolete files
-# followed by $VCS add of new files and cvs commit.
+++ /dev/null
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Process this file with automake to produce Makefile.in (in this,
-# and all subdirectories).
-# Makefile for the top-level directory of GNU hello.
-#
-# Copyright 1997, 1998, 2005, 2006, 2007, 2008, 2009, 2010, 2011
-# Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/config.in \
- $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \
- INSTALL NEWS THANKS TODO build-aux/config.guess \
- build-aux/config.rpath build-aux/config.sub build-aux/depcomp \
- build-aux/install-sh build-aux/mdate-sh build-aux/missing \
- build-aux/texinfo.tex
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
- $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \
- $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/configmake.m4 \
- $(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \
- $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-o.m4 \
- $(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/getopt.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/gnulib-common.m4 \
- $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \
- $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
- $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/locale-fr.m4 \
- $(top_srcdir)/m4/locale-ja.m4 $(top_srcdir)/m4/locale-zh.m4 \
- $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \
- $(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/msvc-inval.m4 \
- $(top_srcdir)/m4/msvc-nothrow.m4 $(top_srcdir)/m4/nls.m4 \
- $(top_srcdir)/m4/nocrash.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quotearg.m4 \
- $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdbool.m4 \
- $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
- $(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
- $(top_srcdir)/m4/sys_socket_h.m4 $(top_srcdir)/m4/unistd_h.m4 \
- $(top_srcdir)/m4/warn-on-use.m4 $(top_srcdir)/m4/wchar_h.m4 \
- $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype_h.m4 \
- $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- if test -d "$(distdir)"; then \
- find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -rf "$(distdir)" \
- || { sleep 5 && rm -rf "$(distdir)"; }; \
- else :; fi
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
- | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-pkglibexecdir = @pkglibexecdir@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-ARFLAGS = @ARFLAGS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CONFIG_INCLUDE = @CONFIG_INCLUDE@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
-EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
-ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
-ENOLINK_VALUE = @ENOLINK_VALUE@
-EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
-EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
-ERRNO_H = @ERRNO_H@
-EXEEXT = @EXEEXT@
-GETOPT_H = @GETOPT_H@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GNULIB_ATOLL = @GNULIB_ATOLL@
-GNULIB_BTOWC = @GNULIB_BTOWC@
-GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
-GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
-GNULIB_CHDIR = @GNULIB_CHDIR@
-GNULIB_CHOWN = @GNULIB_CHOWN@
-GNULIB_CLOSE = @GNULIB_CLOSE@
-GNULIB_DUP = @GNULIB_DUP@
-GNULIB_DUP2 = @GNULIB_DUP2@
-GNULIB_DUP3 = @GNULIB_DUP3@
-GNULIB_ENVIRON = @GNULIB_ENVIRON@
-GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
-GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
-GNULIB_FCHDIR = @GNULIB_FCHDIR@
-GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
-GNULIB_FDATASYNC = @GNULIB_FDATASYNC@
-GNULIB_FFSL = @GNULIB_FFSL@
-GNULIB_FFSLL = @GNULIB_FFSLL@
-GNULIB_FSYNC = @GNULIB_FSYNC@
-GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
-GNULIB_GETCWD = @GNULIB_GETCWD@
-GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
-GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
-GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
-GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
-GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
-GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
-GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
-GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
-GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
-GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
-GNULIB_GL_UNISTD_H_GETOPT = @GNULIB_GL_UNISTD_H_GETOPT@
-GNULIB_GRANTPT = @GNULIB_GRANTPT@
-GNULIB_GROUP_MEMBER = @GNULIB_GROUP_MEMBER@
-GNULIB_ISATTY = @GNULIB_ISATTY@
-GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
-GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
-GNULIB_LCHOWN = @GNULIB_LCHOWN@
-GNULIB_LINK = @GNULIB_LINK@
-GNULIB_LINKAT = @GNULIB_LINKAT@
-GNULIB_LSEEK = @GNULIB_LSEEK@
-GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
-GNULIB_MBRLEN = @GNULIB_MBRLEN@
-GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
-GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
-GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
-GNULIB_MBSCHR = @GNULIB_MBSCHR@
-GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
-GNULIB_MBSINIT = @GNULIB_MBSINIT@
-GNULIB_MBSLEN = @GNULIB_MBSLEN@
-GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
-GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
-GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
-GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
-GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
-GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
-GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
-GNULIB_MBSSEP = @GNULIB_MBSSEP@
-GNULIB_MBSSPN = @GNULIB_MBSSPN@
-GNULIB_MBSSTR = @GNULIB_MBSSTR@
-GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
-GNULIB_MBTOWC = @GNULIB_MBTOWC@
-GNULIB_MEMCHR = @GNULIB_MEMCHR@
-GNULIB_MEMMEM = @GNULIB_MEMMEM@
-GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
-GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
-GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
-GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
-GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
-GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
-GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
-GNULIB_PIPE = @GNULIB_PIPE@
-GNULIB_PIPE2 = @GNULIB_PIPE2@
-GNULIB_POSIX_OPENPT = @GNULIB_POSIX_OPENPT@
-GNULIB_PREAD = @GNULIB_PREAD@
-GNULIB_PTSNAME = @GNULIB_PTSNAME@
-GNULIB_PTSNAME_R = @GNULIB_PTSNAME_R@
-GNULIB_PUTENV = @GNULIB_PUTENV@
-GNULIB_PWRITE = @GNULIB_PWRITE@
-GNULIB_RANDOM = @GNULIB_RANDOM@
-GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
-GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
-GNULIB_READ = @GNULIB_READ@
-GNULIB_READLINK = @GNULIB_READLINK@
-GNULIB_READLINKAT = @GNULIB_READLINKAT@
-GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
-GNULIB_REALPATH = @GNULIB_REALPATH@
-GNULIB_RMDIR = @GNULIB_RMDIR@
-GNULIB_RPMATCH = @GNULIB_RPMATCH@
-GNULIB_SETENV = @GNULIB_SETENV@
-GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
-GNULIB_SLEEP = @GNULIB_SLEEP@
-GNULIB_STPCPY = @GNULIB_STPCPY@
-GNULIB_STPNCPY = @GNULIB_STPNCPY@
-GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
-GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
-GNULIB_STRDUP = @GNULIB_STRDUP@
-GNULIB_STRERROR = @GNULIB_STRERROR@
-GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
-GNULIB_STRNCAT = @GNULIB_STRNCAT@
-GNULIB_STRNDUP = @GNULIB_STRNDUP@
-GNULIB_STRNLEN = @GNULIB_STRNLEN@
-GNULIB_STRPBRK = @GNULIB_STRPBRK@
-GNULIB_STRSEP = @GNULIB_STRSEP@
-GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
-GNULIB_STRSTR = @GNULIB_STRSTR@
-GNULIB_STRTOD = @GNULIB_STRTOD@
-GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
-GNULIB_STRTOLL = @GNULIB_STRTOLL@
-GNULIB_STRTOULL = @GNULIB_STRTOULL@
-GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
-GNULIB_SYMLINK = @GNULIB_SYMLINK@
-GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
-GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
-GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
-GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
-GNULIB_UNISTD_H_NONBLOCKING = @GNULIB_UNISTD_H_NONBLOCKING@
-GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
-GNULIB_UNLINK = @GNULIB_UNLINK@
-GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
-GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
-GNULIB_UNSETENV = @GNULIB_UNSETENV@
-GNULIB_USLEEP = @GNULIB_USLEEP@
-GNULIB_WCPCPY = @GNULIB_WCPCPY@
-GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
-GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
-GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
-GNULIB_WCSCAT = @GNULIB_WCSCAT@
-GNULIB_WCSCHR = @GNULIB_WCSCHR@
-GNULIB_WCSCMP = @GNULIB_WCSCMP@
-GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
-GNULIB_WCSCPY = @GNULIB_WCSCPY@
-GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
-GNULIB_WCSDUP = @GNULIB_WCSDUP@
-GNULIB_WCSLEN = @GNULIB_WCSLEN@
-GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
-GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
-GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
-GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
-GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
-GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
-GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
-GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
-GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
-GNULIB_WCSSPN = @GNULIB_WCSSPN@
-GNULIB_WCSSTR = @GNULIB_WCSSTR@
-GNULIB_WCSTOK = @GNULIB_WCSTOK@
-GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
-GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
-GNULIB_WCTOB = @GNULIB_WCTOB@
-GNULIB_WCTOMB = @GNULIB_WCTOMB@
-GNULIB_WCTRANS = @GNULIB_WCTRANS@
-GNULIB_WCTYPE = @GNULIB_WCTYPE@
-GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
-GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
-GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
-GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
-GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
-GNULIB_WMEMSET = @GNULIB_WMEMSET@
-GNULIB_WRITE = @GNULIB_WRITE@
-GNULIB__EXIT = @GNULIB__EXIT@
-GREP = @GREP@
-HAVE_ATOLL = @HAVE_ATOLL@
-HAVE_BTOWC = @HAVE_BTOWC@
-HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
-HAVE_CHOWN = @HAVE_CHOWN@
-HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
-HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
-HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
-HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
-HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
-HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
-HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
-HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
-HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
-HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
-HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
-HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
-HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
-HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
-HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
-HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
-HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
-HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
-HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
-HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
-HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
-HAVE_DUP2 = @HAVE_DUP2@
-HAVE_DUP3 = @HAVE_DUP3@
-HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
-HAVE_FACCESSAT = @HAVE_FACCESSAT@
-HAVE_FCHDIR = @HAVE_FCHDIR@
-HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
-HAVE_FDATASYNC = @HAVE_FDATASYNC@
-HAVE_FEATURES_H = @HAVE_FEATURES_H@
-HAVE_FFSL = @HAVE_FFSL@
-HAVE_FFSLL = @HAVE_FFSLL@
-HAVE_FSYNC = @HAVE_FSYNC@
-HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
-HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
-HAVE_GETGROUPS = @HAVE_GETGROUPS@
-HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
-HAVE_GETLOGIN = @HAVE_GETLOGIN@
-HAVE_GETOPT_H = @HAVE_GETOPT_H@
-HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
-HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
-HAVE_GRANTPT = @HAVE_GRANTPT@
-HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
-HAVE_ISWBLANK = @HAVE_ISWBLANK@
-HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
-HAVE_LCHOWN = @HAVE_LCHOWN@
-HAVE_LINK = @HAVE_LINK@
-HAVE_LINKAT = @HAVE_LINKAT@
-HAVE_MBRLEN = @HAVE_MBRLEN@
-HAVE_MBRTOWC = @HAVE_MBRTOWC@
-HAVE_MBSINIT = @HAVE_MBSINIT@
-HAVE_MBSLEN = @HAVE_MBSLEN@
-HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
-HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
-HAVE_MEMCHR = @HAVE_MEMCHR@
-HAVE_MEMPCPY = @HAVE_MEMPCPY@
-HAVE_MKDTEMP = @HAVE_MKDTEMP@
-HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
-HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
-HAVE_MKSTEMP = @HAVE_MKSTEMP@
-HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
-HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
-HAVE_OS_H = @HAVE_OS_H@
-HAVE_PIPE = @HAVE_PIPE@
-HAVE_PIPE2 = @HAVE_PIPE2@
-HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
-HAVE_PREAD = @HAVE_PREAD@
-HAVE_PTSNAME = @HAVE_PTSNAME@
-HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
-HAVE_PWRITE = @HAVE_PWRITE@
-HAVE_RANDOM = @HAVE_RANDOM@
-HAVE_RANDOM_H = @HAVE_RANDOM_H@
-HAVE_RANDOM_R = @HAVE_RANDOM_R@
-HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
-HAVE_READLINK = @HAVE_READLINK@
-HAVE_READLINKAT = @HAVE_READLINKAT@
-HAVE_REALPATH = @HAVE_REALPATH@
-HAVE_RPMATCH = @HAVE_RPMATCH@
-HAVE_SETENV = @HAVE_SETENV@
-HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
-HAVE_SLEEP = @HAVE_SLEEP@
-HAVE_STPCPY = @HAVE_STPCPY@
-HAVE_STPNCPY = @HAVE_STPNCPY@
-HAVE_STRCASESTR = @HAVE_STRCASESTR@
-HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
-HAVE_STRPBRK = @HAVE_STRPBRK@
-HAVE_STRSEP = @HAVE_STRSEP@
-HAVE_STRTOD = @HAVE_STRTOD@
-HAVE_STRTOLL = @HAVE_STRTOLL@
-HAVE_STRTOULL = @HAVE_STRTOULL@
-HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
-HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
-HAVE_SYMLINK = @HAVE_SYMLINK@
-HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
-HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
-HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
-HAVE_UNISTD_H = @HAVE_UNISTD_H@
-HAVE_UNLINKAT = @HAVE_UNLINKAT@
-HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
-HAVE_USLEEP = @HAVE_USLEEP@
-HAVE_WCHAR_H = @HAVE_WCHAR_H@
-HAVE_WCHAR_T = @HAVE_WCHAR_T@
-HAVE_WCPCPY = @HAVE_WCPCPY@
-HAVE_WCPNCPY = @HAVE_WCPNCPY@
-HAVE_WCRTOMB = @HAVE_WCRTOMB@
-HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
-HAVE_WCSCAT = @HAVE_WCSCAT@
-HAVE_WCSCHR = @HAVE_WCSCHR@
-HAVE_WCSCMP = @HAVE_WCSCMP@
-HAVE_WCSCOLL = @HAVE_WCSCOLL@
-HAVE_WCSCPY = @HAVE_WCSCPY@
-HAVE_WCSCSPN = @HAVE_WCSCSPN@
-HAVE_WCSDUP = @HAVE_WCSDUP@
-HAVE_WCSLEN = @HAVE_WCSLEN@
-HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
-HAVE_WCSNCAT = @HAVE_WCSNCAT@
-HAVE_WCSNCMP = @HAVE_WCSNCMP@
-HAVE_WCSNCPY = @HAVE_WCSNCPY@
-HAVE_WCSNLEN = @HAVE_WCSNLEN@
-HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
-HAVE_WCSPBRK = @HAVE_WCSPBRK@
-HAVE_WCSRCHR = @HAVE_WCSRCHR@
-HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
-HAVE_WCSSPN = @HAVE_WCSSPN@
-HAVE_WCSSTR = @HAVE_WCSSTR@
-HAVE_WCSTOK = @HAVE_WCSTOK@
-HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
-HAVE_WCSXFRM = @HAVE_WCSXFRM@
-HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
-HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
-HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
-HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
-HAVE_WINT_T = @HAVE_WINT_T@
-HAVE_WMEMCHR = @HAVE_WMEMCHR@
-HAVE_WMEMCMP = @HAVE_WMEMCMP@
-HAVE_WMEMCPY = @HAVE_WMEMCPY@
-HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
-HAVE_WMEMSET = @HAVE_WMEMSET@
-HAVE__BOOL = @HAVE__BOOL@
-HAVE__EXIT = @HAVE__EXIT@
-HELP2MAN = @HELP2MAN@
-INCLUDE_NEXT = @INCLUDE_NEXT@
-INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBHELLO_LIBDEPS = @LIBHELLO_LIBDEPS@
-LIBHELLO_LTLIBDEPS = @LIBHELLO_LTLIBDEPS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
-LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
-LOCALE_JA = @LOCALE_JA@
-LOCALE_ZH_CN = @LOCALE_ZH_CN@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
-NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
-NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
-NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
-NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
-NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
-NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
-NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
-NEXT_ERRNO_H = @NEXT_ERRNO_H@
-NEXT_GETOPT_H = @NEXT_GETOPT_H@
-NEXT_STDDEF_H = @NEXT_STDDEF_H@
-NEXT_STDLIB_H = @NEXT_STDLIB_H@
-NEXT_STRING_H = @NEXT_STRING_H@
-NEXT_UNISTD_H = @NEXT_UNISTD_H@
-NEXT_WCHAR_H = @NEXT_WCHAR_H@
-NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
-PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
-RANLIB = @RANLIB@
-REPLACE_BTOWC = @REPLACE_BTOWC@
-REPLACE_CALLOC = @REPLACE_CALLOC@
-REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
-REPLACE_CHOWN = @REPLACE_CHOWN@
-REPLACE_CLOSE = @REPLACE_CLOSE@
-REPLACE_DUP = @REPLACE_DUP@
-REPLACE_DUP2 = @REPLACE_DUP2@
-REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
-REPLACE_GETCWD = @REPLACE_GETCWD@
-REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
-REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
-REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
-REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
-REPLACE_ISATTY = @REPLACE_ISATTY@
-REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
-REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
-REPLACE_LCHOWN = @REPLACE_LCHOWN@
-REPLACE_LINK = @REPLACE_LINK@
-REPLACE_LINKAT = @REPLACE_LINKAT@
-REPLACE_LSEEK = @REPLACE_LSEEK@
-REPLACE_MALLOC = @REPLACE_MALLOC@
-REPLACE_MBRLEN = @REPLACE_MBRLEN@
-REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
-REPLACE_MBSINIT = @REPLACE_MBSINIT@
-REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
-REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
-REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
-REPLACE_MBTOWC = @REPLACE_MBTOWC@
-REPLACE_MEMCHR = @REPLACE_MEMCHR@
-REPLACE_MEMMEM = @REPLACE_MEMMEM@
-REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
-REPLACE_NULL = @REPLACE_NULL@
-REPLACE_PREAD = @REPLACE_PREAD@
-REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
-REPLACE_PUTENV = @REPLACE_PUTENV@
-REPLACE_PWRITE = @REPLACE_PWRITE@
-REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
-REPLACE_READ = @REPLACE_READ@
-REPLACE_READLINK = @REPLACE_READLINK@
-REPLACE_REALLOC = @REPLACE_REALLOC@
-REPLACE_REALPATH = @REPLACE_REALPATH@
-REPLACE_RMDIR = @REPLACE_RMDIR@
-REPLACE_SETENV = @REPLACE_SETENV@
-REPLACE_SLEEP = @REPLACE_SLEEP@
-REPLACE_STPNCPY = @REPLACE_STPNCPY@
-REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
-REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
-REPLACE_STRDUP = @REPLACE_STRDUP@
-REPLACE_STRERROR = @REPLACE_STRERROR@
-REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
-REPLACE_STRNCAT = @REPLACE_STRNCAT@
-REPLACE_STRNDUP = @REPLACE_STRNDUP@
-REPLACE_STRNLEN = @REPLACE_STRNLEN@
-REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
-REPLACE_STRSTR = @REPLACE_STRSTR@
-REPLACE_STRTOD = @REPLACE_STRTOD@
-REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
-REPLACE_SYMLINK = @REPLACE_SYMLINK@
-REPLACE_TOWLOWER = @REPLACE_TOWLOWER@
-REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
-REPLACE_UNLINK = @REPLACE_UNLINK@
-REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
-REPLACE_UNSETENV = @REPLACE_UNSETENV@
-REPLACE_USLEEP = @REPLACE_USLEEP@
-REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
-REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
-REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
-REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
-REPLACE_WCTOB = @REPLACE_WCTOB@
-REPLACE_WCTOMB = @REPLACE_WCTOMB@
-REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
-REPLACE_WRITE = @REPLACE_WRITE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STDBOOL_H = @STDBOOL_H@
-STDDEF_H = @STDDEF_H@
-STRIP = @STRIP@
-UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
-UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
-UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gl_LIBOBJS = @gl_LIBOBJS@
-gl_LTLIBOBJS = @gl_LTLIBOBJS@
-gltests_LIBOBJS = @gltests_LIBOBJS@
-gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
-gltests_WITNESS = @gltests_WITNESS@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-lispdir = @lispdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# Find gnulib headers.
-ACLOCAL_AMFLAGS = -I m4
-
-# Additional files to distribute.
-EXTRA_DIST = ChangeLog.O m4/gnulib-cache.m4
-
-# Subdirectories to descend into.
-SUBDIRS = contrib lib po src doc man tests
-
-# Example of updating the online web pages for the documentation
-# with the gendocs.sh script; see
-# http://www.gnu.org/prep/maintain/html_node/Invoking-gendocs_002esh.html
-#
-gendocs = build-aux/gendocs.sh
-gendocs_envvars = GENDOCS_TEMPLATE_DIR=doc
-#
-manual = hello
-manual_title = "Hello, GNU World"
-email = bug-hello@gnu.org
-gendocs_args = --email $(email) $(manual) $(manual_title)
-#
-www_target = $(HOME)/gnu/www/hello/manual
-#
-doctemp = doc/wwwtemp
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
- @:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
-
-stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.in: $(am__configure_deps)
- ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -755 \
- -exec chmod u+rwx,go+rx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-lzip: distdir
- tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
- $(am__remove_distdir)
-
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
-
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
- *.tar.lz*) \
- lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(AM_DISTCHECK_CONFIGURE_FLAGS) \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @test -n '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: trying to run $@ with an empty' \
- '$$(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- $(am__cd) '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
- ctags-recursive install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
- distcheck distclean distclean-generic distclean-hdr \
- distclean-tags distcleancheck distdir distuninstallcheck dvi \
- dvi-am html html-am info info-am install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am
-
-
-# Verify that all source files using _() are listed in po/POTFILES.in.
-# The idea is to run this before making pretests, as well as official
-# releases, so that translators will be sure to have all the messages.
-# (From coreutils.)
-po-check:
- if test -f po/POTFILES.in; then \
- grep -E -v '^(#|$$)' po/POTFILES.in \
- | grep -v '^src/false\.c$$' | sort > $@-1; \
- files=; \
- for file in $$($(CVS_LIST_EXCEPT)) `find * -name '*.[ch]'`; do \
- case $$file in \
- djgpp/* | man/*) continue;; \
- esac; \
- case $$file in \
- *.[ch]) \
- base=`expr " $$file" : ' \(.*\)\..'`; \
- { test -f $$base.l || test -f $$base.y; } && continue;; \
- esac; \
- files="$$files $$file"; \
- done; \
- grep -E -l '\b(N?_|gettext *)\([^)"]*("|$$)' $$files \
- | sort -u > $@-2; \
- diff -u $@-1 $@-2 || exit 1; \
- rm -f $@-1 $@-2; \
- fi
-wwwdoc:
- rm -rf $(doctemp) && mkdir $(doctemp)
- cd $(doctemp) \
- && ln -s ../*.texi . \
- && env $(gendocs_envvars) $(gendocs) $(gendocs_args)
- cp -arf $(doctemp)/manual/. $(www_target)
- ls -ltu $(www_target)/html_node | tail # $VCS rm -f obsolete files
-# followed by $VCS add of new files and cvs commit.
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-* Noteworthy changes in release ?.? (????-??-??) [?]
-
-* Noteworthy changes in release 2.8 (2012-04-19) [stable]
-
-The build system has been overhauled to be more in line with
-mainstream modern GNU practice, and various translations have been
-updated (thanks to the Translation Project!).
-
-Version 2.7 (28 March 2011)
-* Distribution:
- . gettext 0.18.1.
- . help2man 1.39.2.
- . updated -translations.
-
-\f Version 2.6 (7 April 2010)
-* Distribution:
- . make distribution of .tar.xz as well as .tar.gz.
- . gettext 0.17.
- . gnulib updates.
- . use gnulib's srclist-update to keep other common files in sync.
- . updated translations.
-
-\f Version 2.5 (7 February 2010)
-* Distribution:
- . gnulib updates.
- . autoconf 2.65, automake 1.11.1.
- (Especially including the make dist security fix.)
- . follow latest recommendations for --help and --version.
- . updated translations.
-
-\f Version 2.4 (9 December 2008)
-* last greeting option wins; before, the precedence was randomly hardwired.
-* FDL version 1.3+ for the documentation.
-* Distribution:
- . gnulib updates.
- . automake 1.10.2.
- . Include en@quot and en@boldquot support.
- . Remove obsolete translations de_DE and es_AR.
- . new (old) translations: ms (Malay), ro (Romansh), th (Thai).
-
-\f Version 2.3 (29 June 2007)
-* GPL version 3.
-
-\f Version 2.2 (23 November 2006)
-* Remove creeping non-feature of reading mail; simplify code accordingly.
-* Many improvements to the tests to make them more useful examples.
-* --help and --version exit immediately, as specified by GNU standards.
-* Distribution:
- . use gnulib for shared source files, such as texinfo.tex and getopt.c.
- . update for automake 1.10, autoconf 2.61, gettext 0.16.
- . new bg (Bulgarian) translation; many updated translations.
-
-\f Version 2.1.2 (20 July 2002)
-* Updated translations: es, fr, fi, nb, pt_BR, ru, sk, uk.
-* New translations: eu, fa, es_AR, ga, ka, ro, sr, zh_CN.
-
-\f Version 2.1.1 (9 June 2002)
-* Bugfixes:
- . Display the bug reporting address.
-
-\f Version 2.1.0 (22 May 2002)
-* Automake support.
-* Experimental NLS ("Native Language Support").
-* Translations for ca, da, de, el, eo, es, et, fi, fr, gl, he, hr, hu,
- id, it, ja, ko, lv, nb, nl, nn, pl, pt, pt_BR, ru, sk, sl, sv, tr, and uk.
-* Test suite.
-* Add a contrib directory.
-* Manual page, produced with 'help2man'.
-* Create proper copyright statement for all output formats.
-* New greeting message ('-n', '--next-generation').
-* Bugfixes:
- . GNU hello ('-m') does not loop forever if MAIL environment variable is
- not set.
-
-\f Version 1.3 (22 May 1993)
-* GNU hello now exits immediately and successfully after printing its
- version number and/or usage message under the `--version' (or `-v') and
- `--help' (or `-h') options.
-
-\f Version 1.2 (21 May 1993)
-* GNU hello can now read your mail with the `-m' (or `--mail') option.
-
-\f Version 1.1 (16 September 1992)
-* There is a new, improved greeting message.
- You can use the new `--traditional' option to get the old behavior.
-
-* Zork output compatibility has been added.
-
-* There is now a `NEWS' file (this one), giving a history of
- user-visible changes.
+++ /dev/null
-This is the README file for the GNU Hello distribution.
-Hello prints a friendly greeting. It also serves as a sample GNU
-package, showing practices that may be useful for GNU projects.
-
- Copyright (C) 1992, 1993, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
- 2002, 2004, 2005, 2006, 2010 Free Software Foundation, Inc.
-
- Copying and distribution of this file, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved.
-
-See the files ./INSTALL* for building and installation instructions.
-
-Primary distribution point: ftp://ftp.gnu.org/gnu/hello/
- automatic redirection: http://ftpmirror.gnu.org/hello
- list of mirrors for manual selection: http://www.gnu.org/prep/ftp.html
-
-Home page: http://www.gnu.org/software/hello/
-
-Mailing list: bug-hello@gnu.org
-- please use this list for all discussion: bug reports, enhancements, etc.
-- archived at: http://lists.gnu.org/pipermail/bug-hello
-- anyone is welcome to join the list; to do so, visit
- http://lists.gnu.org/mailman/listinfo/bug-hello
-- there is no corresponding newsgroup.
-
-Bug reports:
- Please include enough information for the maintainers to reproduce the
- problem. Generally speaking, that means:
-- the contents of any input files necessary to reproduce the bug
- and command line invocations of the program(s) involved (crucial!).
-- a description of the problem and any samples of the erroneous output.
-- the version number of the program(s) involved (use --version).
-- hardware, operating system, and compiler versions (uname -a).
-- unusual options you gave to configure, if any (see config.status).
-- anything else that you think would be helpful.
-
-Patches are most welcome; if possible, please make them with diff -c and
-include ChangeLog entries.
-
-See README-dev for information on the development environment -- any
-interested parties are welcome. If you're a programmer and wish to
-contribute, this should get you started. If you're not a programmer,
-your help in writing test cases, checking the documentation against the
-implementation, translating the program strings to other languages,
-etc., would still be very much appreciated.
-
-The basic Hello algorithm was described by B.W. Kernighan and
-D.M. Ritchie. The GNU implementation is substantially more complex, in
-order to be a canonical example of a GNU package. Many people have
-contributed; please see the ./AUTHORS and ./ChangeLog files.
-
-GNU Hello is free software. See the file COPYING for copying conditions.
+++ /dev/null
-Here are most of the steps we (maintainers) follow when making a release.
-
-* Start from a clean, up-to-date git directory on "master":
-
- make -k maintainer-clean || { ./configure && make maintainer-clean; }
- git checkout master
- git pull origin master
-
-* Ensure that the latest stable versions of autoconf, automake, etc.
- are in your PATH. See the buildreq list in bootstrap.conf for
- the complete list of tools.
-
-* Ensure that you have no uncommitted diffs. This should produce no
- output:
-
- git diff
-
-* Ensure that you've pushed all changes that belong in the release:
-
- git push origin master
-
-* Check that the NixOS/Hydra autobuilder is reporting all is well:
-
- http://hydra.nixos.org/jobset/gnu/@PACKAGE@-master
-
-* Run the following command to download any new translations:
-
- ./bootstrap && ./configure
-
-* Pre-release testing: ensure that the following command succeeds:
-
- make check syntax-check distcheck
-
-* Set the date, version number, and release type [stable/alpha/beta] on
- line 3 of NEWS, commit that, and tag the release by running e.g.,
-
- build-aux/do-release-commit-and-tag X.Y stable
-
-* Run the following to create release tarballs. Your choice selects the
- corresponding upload-to destination in the emitted gnupload command.
- The different destinations are specified in cfg.mk. See the definitions
- of gnu_ftp_host-{alpha,beta,stable}.
-
- # "TYPE" must be stable, beta or alpha
- make TYPE
-
-* Test the tarball. Copy it to a few odd-ball systems and ensure that
- it builds and passes all tests.
-
-* While that's happening, write the release announcement that you will
- soon post. Start with the template, $HOME/announce-@PACKAGE@-X.Y
- that was just created by that "make" command.
-
-Once all the builds and tests have passed,
-
-* Run the gnupload command that was suggested by your "make TYPE" run above.
-
-* Wait a few minutes (maybe up to 30?) and then use the release URLs to
- download all tarball/signature pairs and use gpg --verify to ensure
- that they're all valid.
-
-* Push the NEWS-updating changes and the new tag:
-
- v=$(cat .prev-version)
- git push origin master tag v$v
-
-* Announce it on Savannah first, so you can include the savannah.org
- announcement link in the email message.
-
- From here:
- https://savannah.gnu.org/projects/@PACKAGE@/
- click on "submit news", then write something like the following:
- (If there is no such button, then enable "News" for the project via
- the Main -> "Select Features" menu item, or via this link:
- https://savannah.gnu.org/project/admin/editgroupfeatures.php?group=@PACKAGE@)
-
- Subject: @PACKAGE@-X.Y released [stable]
- +verbatim+
- ...paste the announcement here...
- -verbatim-
-
- Then go here to approve it:
- https://savannah.gnu.org/news/approve.php?group=@PACKAGE@
-
-* Send the announcement email message.
-
-* After each non-alpha release, update the on-line manual accessible via
-
- http://www.gnu.org/software/@PACKAGE@/manual/
-
- by running this:
-
- build-aux/gnu-web-doc-update
+++ /dev/null
-Additional contributors to GNU Hello.
-
- Copyright (C) 1999, 2005 Free Software Foundation, Inc.
-
- Copying and distribution of this file, with or without modification,
- are permitted in any medium without royalty provided the copyright
- notice and this notice are preserved.
-
-Thanks to:
-
- François Pinard for assistance and good ideas.
-
- Jochen Hein for pre-testing and bug reports.
-
- Ulrich Drepper who never hesitates to answer questions concerning
- i18n/l10n (gettext 0.10.35) and Autoconf/Makefile nitty gritties.
-
- Tom Tromey for Automake support.
-
- Kaveh R. Ghazi for reporting and solving compilation problems.
-
- Bruno Haible for gettext help (0.10.36 and later).
-
- Paul Eggert for feedback and patches.
-
- Fabrice Bauzac and Thomas Bushnell.
-
- All the translators (run 'grep -e ^\"Last-Translator: po/*.po').
-
-See also the AUTHORS and ChangeLog files.
+++ /dev/null
-GNU hello --- TODO
-
-Todo:
-
- * remove README-alpha from the distribution.
- * submit a new hello.pot.
-
--=-=-=-=-=-=-=-=-=-=-=-=-=- cut here -=-=-=-=-=-=-=-=-=-=-=-=-=-
-
-Subject: grep-2.0b: close stdout and make sure it succeeds
-From: meyering@eng.ascend.com (Jim Meyering)
-Date: 1997/07/16
-Message-ID: <yzq4t9ucuz5.fsf@boom.eng.ascend.com>
-Newsgroups: gnu.utils.bug
-
-
-Hi Alain,
-
-Thanks for taking up the reins!
-
-Almost every program that writes a single byte to stdout should
-do the following just before exiting: close stdout and give a
-diagnostic if the close fails.
-
-Otherwise, write errors can go unreported. You can provoke this
-by e.g. making grep generate lots of output and redirect that output
-to a floppy or to any file system that's nearly full.
-
-GNU hello should set a good example and do this, too.
-
-Here's a patch I've been using for a long time:
-
- * src/grep.c: Cause grep to fail if `fclose (stdout)' fails.
-
---- grep.c.orig Wed Jul 16 20:44:20 1997
-+++ grep.c Wed Jul 16 20:44:30 1997
-@@ -846,5 +846,8 @@ main(argc, argv)
- printf(_("(standard input)\n"));
- }
-
-+ if (fclose (stdout) == EOF)
-+ error (_("writing output", errno));
-+
- exit(errseen ? 2 : status);
- }
-
-
-end of file TODO
+++ /dev/null
-# generated automatically by aclocal 1.11.3 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
-# Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11.3], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.3])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
-# 2010, 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 16
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
-# Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
-# Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
-# Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/00gnulib.m4])
-m4_include([m4/close-stream.m4])
-m4_include([m4/closeout.m4])
-m4_include([m4/codeset.m4])
-m4_include([m4/configmake.m4])
-m4_include([m4/errno_h.m4])
-m4_include([m4/error.m4])
-m4_include([m4/extensions.m4])
-m4_include([m4/fcntl-o.m4])
-m4_include([m4/fpending.m4])
-m4_include([m4/getopt.m4])
-m4_include([m4/gettext.m4])
-m4_include([m4/glibc21.m4])
-m4_include([m4/gnulib-common.m4])
-m4_include([m4/gnulib-comp.m4])
-m4_include([m4/iconv.m4])
-m4_include([m4/include_next.m4])
-m4_include([m4/inline.m4])
-m4_include([m4/intlmacosx.m4])
-m4_include([m4/lib-ld.m4])
-m4_include([m4/lib-link.m4])
-m4_include([m4/lib-prefix.m4])
-m4_include([m4/localcharset.m4])
-m4_include([m4/locale-fr.m4])
-m4_include([m4/locale-ja.m4])
-m4_include([m4/locale-zh.m4])
-m4_include([m4/mbrtowc.m4])
-m4_include([m4/mbsinit.m4])
-m4_include([m4/mbstate_t.m4])
-m4_include([m4/msvc-inval.m4])
-m4_include([m4/msvc-nothrow.m4])
-m4_include([m4/nls.m4])
-m4_include([m4/nocrash.m4])
-m4_include([m4/po.m4])
-m4_include([m4/progtest.m4])
-m4_include([m4/quotearg.m4])
-m4_include([m4/ssize_t.m4])
-m4_include([m4/stdbool.m4])
-m4_include([m4/stddef_h.m4])
-m4_include([m4/stdlib_h.m4])
-m4_include([m4/strerror.m4])
-m4_include([m4/string_h.m4])
-m4_include([m4/sys_socket_h.m4])
-m4_include([m4/unistd_h.m4])
-m4_include([m4/warn-on-use.m4])
-m4_include([m4/wchar_h.m4])
-m4_include([m4/wchar_t.m4])
-m4_include([m4/wctype_h.m4])
-m4_include([m4/wint_t.m4])
-m4_include([m4/xalloc.m4])
+++ /dev/null
-opyright 2012 Samsung Electronics Co., Ltd
- *
- * Licensed under the Flora License, Version 1.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.tizenopensource.org/license
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-
-#include "browser-settings-class.h"
-#include "browser-settings-website-setting.h"
-#include "browser-view.h"
-
-Browser_Settings_Website_Setting::Browser_Settings_Website_Setting(Browser_Settings_Main_View *main_view)
-:
- m_genlist(NULL)
- ,m_details_genlist(NULL)
- ,m_back_button(NULL)
- ,m_back_button_details(NULL)
- ,m_clear_confirm_popup(NULL)
- ,m_delete_all_website_list_confirm_popup(NULL)
- ,m_delete_all_details_list_confirm_popup(NULL)
- ,m_bottom_control_bar(NULL)
- ,m_details_bottom_control_bar(NULL)
- ,m_delete_all_website_list_conbar_item(NULL)
- ,m_delete_all_details_conbar_item(NULL)
- ,m_current_website_item_data(NULL)
- ,m_current_item_data(NULL)
- ,m_is_called_appcache_cb_flag(false)
- ,m_is_called_webstorage_cb_flag(false)
- ,m_is_called_webdb_cb_flag(false)
- ,m_main_view(main_view)
-{
- BROWSER_LOGD("[%s]", __func__);
-}
-
-Browser_Settings_Website_Setting::~Browser_Settings_Website_Setting(void)
-{
- BROWSER_LOGD("[%s]", __func__);
-
- for (int i = 0 ; i < m_website_setting_list.size() ; i++) {
- if (m_website_setting_list[i])
- delete m_website_setting_list[i];
- }
- m_website_setting_list.clear();
-}
-
-Eina_Bool Browser_Settings_Website_Setting::init(void)
-{
- BROWSER_LOGD("[%s]", __func__);
-
- if (!_create_main_layout()) {
- BROWSER_LOGE("_create_main_layout failed");
- return EINA_FALSE;
- }
-
- return EINA_TRUE;
-}
-
-Evas_Object *Browser_Settings_Website_Setting::__genlist_icon_get(void *data,
- Evas_Object *obj, const char *part)
-{
- if (!data)
- return NULL;
-
- BROWSER_LOGD("part = [%s]", part);
-
- Browser_Geolocation_DB::geolocation_info *info = (Browser_Geolocation_DB::geolocation_info *)data;
-
- if (part && strlen(part) > 0) {
- if (!strncmp(part, "elm.icon.1", strlen("elm.icon.1"))) {
- Evas_Object *favicon = NULL;
- favicon = m_data_manager->get_browser_view()->get_favicon(info->url.c_str());
- if (favicon)
- return favicon;
- else {
- Evas_Object *default_icon = elm_icon_add(obj);
- if (!default_icon)
- return NULL;
- if (!elm_icon_file_set(default_icon, BROWSER_IMAGE_DIR"/faviconDefault.png", NULL)) {
- BROWSER_LOGE("elm_icon_file_set is failed.\n");
- return NULL;
- }
- evas_object_size_hint_aspect_set(default_icon, EVAS_ASPECT_CONTROL_VERTICAL, 1, 1);
- return default_icon;
- }
- } else if (!strncmp(part,"elm.icon.2", strlen("elm.icon.2"))) {
- Evas_Object *location_icon = elm_icon_add(obj);
- if (!location_icon)
- return NULL;
-
- if (info->geolocation) {
- if (info->allow) {
- if (!elm_icon_file_set(location_icon, BROWSER_IMAGE_DIR"/I01_icon_location_allowed.png", NULL)) {
- BROWSER_LOGE("elm_icon_file_set is failed.\n");
- return NULL;
- }
- evas_object_size_hint_aspect_set(location_icon, EVAS_ASPECT_CONTROL_VERTICAL, 1, 1);
- return location_icon;
- } else {
- if (!elm_icon_file_set(location_icon, BROWSER_IMAGE_DIR"/I01_icon_location_denied.png", NULL)) {
- BROWSER_LOGE("elm_icon_file_set is failed.\n");
- return NULL;
- }
- evas_object_size_hint_aspect_set(location_icon, EVAS_ASPECT_CONTROL_VERTICAL, 1, 1);
- return location_icon;
- }
- }
- } else if (!strncmp(part,"elm.icon.3", strlen("elm.icon.3"))) {
- Evas_Object *storage_icon = elm_icon_add(obj);
- if (!storage_icon)
- return NULL;
- if (info->storage) {
- if (!elm_icon_file_set(storage_icon, BROWSER_IMAGE_DIR"/I01_icon_web_storage.png", NULL)) {
- BROWSER_LOGE("elm_icon_file_set is failed.\n");
- return NULL;
- }
- evas_object_size_hint_aspect_set(storage_icon, EVAS_ASPECT_CONTROL_VERTICAL, 1, 1);
- return storage_icon;
- }
- }
- }
-
- return NULL;
-}
-
-char *Browser_Settings_Website_Setting::__genlist_label_get(void *data,
- Evas_Object *obj, const char *part)
-{
- if (!data)
- return NULL;
-
- BROWSER_LOGD("part = [%s]", part);
-
- Browser_Geolocation_DB::geolocation_info *info = (Browser_Geolocation_DB::geolocation_info *)data;
- const char *url = info->url.c_str();
-
- if (part && strlen(part) > 0) {
- if (!strncmp(part,"elm.text", strlen("elm.text"))) {
- if (url && strlen(url))
- return strdup(url);
- }
- }
-
- return NULL;
-}
-
-Evas_Object *Browser_Settings_Website_Setting::__details_genlist_icon_get(void *data,
- Evas_Object *obj, const char *part)
-{
- if (!data)
- return NULL;
-
- BROWSER_LOGD("part = [%s]", part);
-
- genlist_callback_data *callback_data = (genlist_callback_data *)data;
- Browser_Settings_Website_Setting::menu_type type = callback_data->type;
- Browser_Settings_Website_Setting *website_setting = NULL;
-
- Browser_Geolocation_DB::geolocation_info *info =
- (Browser_Geolocation_DB::geolocation_info *)(callback_data->user_data);
-
- if (part && strlen(part) > 0) {
- if (!strncmp(part, "elm.icon", strlen("elm.icon"))) {
- if (type == BR_MENU_LOCATION) {
- BROWSER_LOGD("location menu\n");
- Evas_Object *location_icon = elm_icon_add(obj);
- if (!location_icon)
- return NULL;
- if (info->geolocation) {
- if (info->allow) {
- if (!elm_icon_file_set(location_icon, BROWSER_IMAGE_DIR"/I01_icon_location_allowed_small.png", NULL)) {
- BROWSER_LOGE("elm_icon_file_set is failed.\n");
- return NULL;
- }
- evas_object_size_hint_aspect_set(location_icon, EVAS_ASPECT_CONTROL_VERTICAL, 1, 1);
- return location_icon;
- } else {
- if (!elm_icon_file_set(location_icon, BROWSER_IMAGE_DIR"/I01_icon_location_denied_small.png", NULL)) {
- BROWSER_LOGE("elm_icon_file_set is failed.\n");
- return NULL;
- }
- evas_object_size_hint_aspect_set(location_icon, EVAS_ASPECT_CONTROL_VERTICAL, 1, 1);
- return location_icon;
- }
- }
- } else if (type == BR_MENU_WEB_STORAGE) {
- BROWSER_LOGD("web storage menu.\n");
- Evas_Object *storage_icon = elm_icon_add(obj);
- if (!storage_icon)
- return NULL;
- if (info->storage) {
- if (!elm_icon_file_set(storage_icon, BROWSER_IMAGE_DIR"/I01_icon_web_storage_small.png", NULL)) {
- BROWSER_LOGE("elm_icon_file_set is failed.\n");
- return NULL;
- }
- evas_object_size_hint_aspect_set(storage_icon, EVAS_ASPECT_CONTROL_VERTICAL, 1, 1);
- return storage_icon;
- }
- }else {
- BROWSER_LOGD("wrong menu index.\n");
- return NULL;
- }
- }
- }
- return NULL;
-}
-
-char *Browser_Settings_Website_Setting::__details_genlist_label_get(void *data,
- Evas_Object *obj, const char *part)
-{
- if (!data)
- return NULL;
-
- BROWSER_LOGD("part = [%s]", part);
- genlist_callback_data *callback_data = (genlist_callback_data *)data;
- Browser_Settings_Website_Setting::menu_type type = callback_data->type;
- Browser_Settings_Website_Setting *website_setting = NULL;
-
- Browser_Geolocation_DB::geolocation_info *info =
- (Browser_Geolocation_DB::geolocation_info *)(callback_data->user_data);
- const char *url = info->url.c_str();
-
- if (part && strlen(part) > 0) {
- if (!strncmp(part,"elm.text", strlen("elm.text"))) {
- if (type == BR_MENU_LOCATION) {
- BROWSER_LOGD("location menu.\n");
- return strdup(BR_STRING_CLEAR_LOCATION_ACCESS);
- } else if (type == BR_MENU_WEB_STORAGE) {
- BROWSER_LOGD("web storage menu.\n");
- return strdup(BR_STRING_CLEAR_STORED_DATA);
- }else {
- BROWSER_LOGD("wrong menu index.\n");
- return NULL;
- }
- }
- }
- return NULL;
-}
-
-void Browser_Settings_Website_Setting::__item_selected_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
- Elm_Object_Item *it = (Elm_Object_Item *)event_info;
- website_setting->m_current_website_item_data = NULL;
- website_setting->m_current_website_item_data = (website_setting_item *)elm_object_item_data_get(it);
-
- website_setting->_show_details_list(website_setting->m_current_website_item_data);
- elm_genlist_item_selected_set(it, EINA_FALSE);
-}
-
-void Browser_Settings_Website_Setting::__details_item_selected_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- genlist_callback_data *callback_data = (genlist_callback_data *)data;
- Browser_Settings_Website_Setting::menu_type type = callback_data->type;
- Browser_Settings_Website_Setting *website_setting = NULL;
- website_setting = (Browser_Settings_Website_Setting *)(callback_data->cp);
-
- website_setting->m_current_item_data = (website_setting_item *)callback_data->user_data;
- if (type == BR_MENU_LOCATION) {
- website_setting->_show_clear_location_confirm_popup();
- } else if (type == BR_MENU_WEB_STORAGE) {
- website_setting->_show_clear_web_storage_confirm_popup();
- }
-
- elm_genlist_item_selected_set(callback_data->it, EINA_FALSE);
-}
-
-Eina_Bool Browser_Settings_Website_Setting::_show_clear_location_confirm_popup(void)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (m_clear_confirm_popup)
- evas_object_del(m_clear_confirm_popup);
-
- m_clear_confirm_popup = elm_popup_add(m_details_genlist);
- if (!m_clear_confirm_popup) {
- BROWSER_LOGE("elm_popup_add failed");
- return EINA_FALSE;
- }
-
- evas_object_size_hint_weight_set(m_clear_confirm_popup, EVAS_HINT_EXPAND, EVAS_HINT_EXPAND);
-
- elm_object_text_set(m_clear_confirm_popup, BR_STRING_CLEAR_LOCATION_ACCESS_FOR_THIS_WEBSITE);
-
- Evas_Object *ok_button = elm_button_add(m_clear_confirm_popup);
- if (!ok_button) {
- BROWSER_LOGE("elm_button_add failed");
- return EINA_FALSE;
- }
- elm_object_text_set(ok_button, BR_STRING_YES);
- elm_object_part_content_set(m_clear_confirm_popup, "button1", ok_button);
- evas_object_smart_callback_add(ok_button, "clicked", __clear_location_confirm_response_cb, this);
-
- Evas_Object *cancel_button = elm_button_add(m_clear_confirm_popup);
- elm_object_text_set(cancel_button, BR_STRING_NO);
- elm_object_part_content_set(m_clear_confirm_popup, "button2", cancel_button);
- evas_object_smart_callback_add(cancel_button, "clicked", __cancel_clear_location_confirm_response_cb, this);
-
- evas_object_show(m_clear_confirm_popup);
-
- return EINA_TRUE;
-}
-
-Eina_Bool Browser_Settings_Website_Setting::_show_clear_web_storage_confirm_popup(void)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (m_clear_confirm_popup)
- evas_object_del(m_clear_confirm_popup);
-
- m_clear_confirm_popup = elm_popup_add(m_details_genlist);
- if (!m_clear_confirm_popup) {
- BROWSER_LOGE("elm_popup_add failed");
- return EINA_FALSE;
- }
-
- evas_object_size_hint_weight_set(m_clear_confirm_popup, EVAS_HINT_EXPAND, EVAS_HINT_EXPAND);
-
- elm_object_text_set(m_clear_confirm_popup, BR_STRING_DELETE_ALL_STORED_DATA_BY_THIS_WEBSITE);
-
- Evas_Object *ok_button = elm_button_add(m_clear_confirm_popup);
- if (!ok_button) {
- BROWSER_LOGE("elm_button_add failed");
- return EINA_FALSE;
- }
- elm_object_text_set(ok_button, BR_STRING_YES);
- elm_object_part_content_set(m_clear_confirm_popup, "button1", ok_button);
- evas_object_smart_callback_add(ok_button, "clicked", __clear_web_storage_confirm_response_cb, this);
-
- Evas_Object *cancel_button = elm_button_add(m_clear_confirm_popup);
- elm_object_text_set(cancel_button, BR_STRING_NO);
- elm_object_part_content_set(m_clear_confirm_popup, "button2", cancel_button);
- evas_object_smart_callback_add(cancel_button, "clicked", __cancel_clear_web_storage_confirm_response_cb, this);
-
- evas_object_show(m_clear_confirm_popup);
-
- return EINA_TRUE;
-}
-
-Eina_Bool Browser_Settings_Website_Setting::_show_delete_all_website_list_confirm_popup(void)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (m_delete_all_website_list_confirm_popup)
- evas_object_del(m_delete_all_website_list_confirm_popup);
-
- m_delete_all_website_list_confirm_popup = elm_popup_add(m_genlist);
- if (!m_delete_all_website_list_confirm_popup) {
- BROWSER_LOGE("elm_popup_add failed");
- return EINA_FALSE;
- }
-
- evas_object_size_hint_weight_set(m_delete_all_website_list_confirm_popup, EVAS_HINT_EXPAND, EVAS_HINT_EXPAND);
-
- elm_object_text_set(m_delete_all_website_list_confirm_popup, BR_STRING_DELETE_ALL_WEBSITE_DATA_AND_LOCATION_PERMISSIONS);
-
- Evas_Object *ok_button = elm_button_add(m_delete_all_website_list_confirm_popup);
- if (!ok_button) {
- BROWSER_LOGE("elm_button_add failed");
- return EINA_FALSE;
- }
- elm_object_text_set(ok_button, BR_STRING_YES);
- elm_object_part_content_set(m_delete_all_website_list_confirm_popup, "button1", ok_button);
- evas_object_smart_callback_add(ok_button, "clicked", __delete_all_website_list_confirm_response_cb, this);
-
- Evas_Object *cancel_button = elm_button_add(m_delete_all_website_list_confirm_popup);
- elm_object_text_set(cancel_button, BR_STRING_NO);
- elm_object_part_content_set(m_delete_all_website_list_confirm_popup, "button2", cancel_button);
- evas_object_smart_callback_add(cancel_button, "clicked", __cancel_delete_all_website_list_confirm_response_cb, this);
-
- evas_object_show(m_delete_all_website_list_confirm_popup);
-
- return EINA_TRUE;
-}
-
-Eina_Bool Browser_Settings_Website_Setting::_show_delete_all_details_list_confirm_popup(void)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (m_delete_all_details_list_confirm_popup)
- evas_object_del(m_delete_all_details_list_confirm_popup);
-
- m_delete_all_details_list_confirm_popup = elm_popup_add(m_details_genlist);
- if (!m_delete_all_details_list_confirm_popup) {
- BROWSER_LOGE("elm_popup_add failed");
- return EINA_FALSE;
- }
-
- evas_object_size_hint_weight_set(m_delete_all_details_list_confirm_popup, EVAS_HINT_EXPAND, EVAS_HINT_EXPAND);
-
- elm_object_text_set(m_delete_all_details_list_confirm_popup, BR_STRING_DELETE_ALL_WEBSITE_DATA_AND_LOCATION_PERMISSIONS);
-
- Evas_Object *ok_button = elm_button_add(m_delete_all_details_list_confirm_popup);
- if (!ok_button) {
- BROWSER_LOGE("elm_button_add failed");
- return EINA_FALSE;
- }
- elm_object_text_set(ok_button, BR_STRING_YES);
- elm_object_part_content_set(m_delete_all_details_list_confirm_popup, "button1", ok_button);
- evas_object_smart_callback_add(ok_button, "clicked", __delete_all_details_list_confirm_response_cb, this);
-
- Evas_Object *cancel_button = elm_button_add(m_delete_all_details_list_confirm_popup);
- elm_object_text_set(cancel_button, BR_STRING_NO);
- elm_object_part_content_set(m_delete_all_details_list_confirm_popup, "button2", cancel_button);
- evas_object_smart_callback_add(cancel_button, "clicked", __cancel_delete_all_details_list_confirm_response_cb, this);
-
- evas_object_show(m_delete_all_details_list_confirm_popup);
-
- return EINA_TRUE;
-}
-
-void Browser_Settings_Website_Setting::__clear_location_confirm_response_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
- if (website_setting->m_clear_confirm_popup) {
- evas_object_del(website_setting->m_clear_confirm_popup);
- website_setting->m_clear_confirm_popup = NULL;
- }
-
- Browser_Geolocation_DB geolocation_db;
-
- geolocation_db.remove_geolocation_data(website_setting->m_current_item_data->url.c_str());
- website_setting->m_current_item_data->geolocation = false;
-
- if(website_setting->m_current_item_data->storage == false) {
- website_setting->__back_button_clicked_cb(NULL, NULL, NULL);
- website_setting->_refresh_website_list();
- } else {
- website_setting->_refresh_details_list(website_setting->m_current_item_data);
- }
-
- website_setting->show_notify_popup(BR_STRING_DELETED, 3, EINA_TRUE);
-}
-
-void Browser_Settings_Website_Setting::__cancel_clear_location_confirm_response_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
- if (website_setting->m_clear_confirm_popup) {
- evas_object_del(website_setting->m_clear_confirm_popup);
- website_setting->m_clear_confirm_popup = NULL;
- }
-}
-
-void Browser_Settings_Website_Setting::__clear_web_storage_confirm_response_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
- if (website_setting->m_clear_confirm_popup) {
- evas_object_del(website_setting->m_clear_confirm_popup);
- website_setting->m_clear_confirm_popup = NULL;
- }
-
- /* Clear cache */
- Ewk_Context *ewk_context = ewk_context_default_get();
- ewk_context_application_cache_delete(ewk_context, (Ewk_Security_Origin*)(website_setting->m_current_item_data->origin));
- ewk_context_web_database_delete(ewk_context, (Ewk_Security_Origin*)(website_setting->m_current_item_data->origin));
- ewk_context_web_storage_origin_delete(ewk_context, (Ewk_Security_Origin*)(website_setting->m_current_item_data->origin));
- website_setting->m_current_item_data->storage = false;
-
- if(website_setting->m_current_item_data->geolocation == false) {
- website_setting->__back_button_clicked_cb(NULL, NULL, NULL);
- website_setting->_refresh_website_list();
- } else
- website_setting->_refresh_details_list(website_setting->m_current_item_data);
-
- website_setting->show_notify_popup(BR_STRING_DELETED, 3, EINA_TRUE);
-}
-
-void Browser_Settings_Website_Setting::__cancel_clear_web_storage_confirm_response_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
- if (website_setting->m_clear_confirm_popup) {
- evas_object_del(website_setting->m_clear_confirm_popup);
- website_setting->m_clear_confirm_popup = NULL;
- }
-}
-
-void Browser_Settings_Website_Setting::__delete_all_website_list_confirm_response_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
- if (website_setting->m_delete_all_website_list_confirm_popup) {
- evas_object_del(website_setting->m_delete_all_website_list_confirm_popup);
- website_setting->m_delete_all_website_list_confirm_popup = NULL;
- }
-
- /* Clear Geolocation */
- Browser_Geolocation_DB geolocation_db;
- geolocation_db.remove_all_geolocation_data();
- /* Clear cache */
- Ewk_Context *ewk_context = ewk_context_default_get();
- ewk_context_cache_clear(ewk_context);
- ewk_context_web_indexed_database_delete_all(ewk_context);
- ewk_context_application_cache_delete_all(ewk_context);
- ewk_context_web_storage_delete_all(ewk_context);
- ewk_context_web_database_delete_all(ewk_context);
-
- website_setting->_refresh_website_list();
-
- website_setting->show_notify_popup(BR_STRING_DELETED, 3, EINA_TRUE);
-}
-
-void Browser_Settings_Website_Setting::__cancel_delete_all_website_list_confirm_response_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
- if (website_setting->m_delete_all_website_list_confirm_popup) {
- evas_object_del(website_setting->m_delete_all_website_list_confirm_popup);
- website_setting->m_delete_all_website_list_confirm_popup = NULL;
- }
-}
-
-void Browser_Settings_Website_Setting::__delete_all_details_list_confirm_response_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
- if (website_setting->m_delete_all_details_list_confirm_popup) {
- evas_object_del(website_setting->m_delete_all_details_list_confirm_popup);
- website_setting->m_delete_all_details_list_confirm_popup = NULL;
- }
-
- website_setting_item *info = website_setting->m_current_website_item_data;
- if (info->geolocation) {
- Browser_Geolocation_DB geolocation_db;
- geolocation_db.remove_geolocation_data(info->url.c_str());
- info->geolocation = false;
- }
-
- if (info->storage) {
- /* Clear cache */
- Ewk_Context *ewk_context = ewk_context_default_get();
- ewk_context_application_cache_delete(ewk_context,
- (Ewk_Security_Origin*)(info->origin));
- ewk_context_web_database_delete(ewk_context,
- (Ewk_Security_Origin*)(info->origin));
- ewk_context_web_storage_origin_delete(ewk_context,
- (Ewk_Security_Origin*)(info->origin));
- info->storage = false;
- }
-
- website_setting->__back_button_clicked_cb(NULL, NULL, NULL);
- website_setting->_refresh_website_list();
-
- website_setting->show_notify_popup(BR_STRING_DELETED, 3, EINA_TRUE);
-}
-
-void Browser_Settings_Website_Setting::__cancel_delete_all_details_list_confirm_response_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if (!data)
- return;
-
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
- if (website_setting->m_delete_all_details_list_confirm_popup) {
- evas_object_del(website_setting->m_delete_all_details_list_confirm_popup);
- website_setting->m_delete_all_details_list_confirm_popup = NULL;
- }
-}
-void Browser_Settings_Website_Setting::_show_details_list(website_setting_item *item_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- if(!item_info)
- return;
-
- m_details_genlist = elm_genlist_add(m_navi_bar);
- if (!m_details_genlist) {
- BROWSER_LOGE("elm_genlist_add failed");
- return;
- }
-
- evas_object_show(m_details_genlist);
-
- m_1_text_1_icon_item_class.item_style = "1text.1icon";
- m_1_text_1_icon_item_class.func.text_get = __details_genlist_label_get;
- m_1_text_1_icon_item_class.func.content_get = __details_genlist_icon_get;
- m_1_text_1_icon_item_class.func.state_get = NULL;
- m_1_text_1_icon_item_class.func.del = NULL;
-
- if (item_info->geolocation) {
- m_location_item_callback_data.type = BR_MENU_LOCATION;
- m_location_item_callback_data.cp = this;
- m_location_item_callback_data.user_data = item_info;
- m_location_item_callback_data.it = elm_genlist_item_append(m_details_genlist,
- &m_1_text_1_icon_item_class, &m_location_item_callback_data, NULL, ELM_GENLIST_ITEM_NONE,
- __details_item_selected_cb, &m_location_item_callback_data);
- }
-
- if (item_info->storage) {
- m_web_storage_item_callback_data.type = BR_MENU_WEB_STORAGE;
- m_web_storage_item_callback_data.cp = this;
- m_web_storage_item_callback_data.user_data = item_info;
- m_web_storage_item_callback_data.it = elm_genlist_item_append(m_details_genlist,
- &m_1_text_1_icon_item_class, &m_web_storage_item_callback_data, NULL, ELM_GENLIST_ITEM_NONE,
- __details_item_selected_cb, &m_web_storage_item_callback_data);
- }
-
- m_back_button_details = elm_button_add(m_details_genlist);
- if (!m_back_button_details) {
- BROWSER_LOGE("elm_button_add failed");
- return;
- }
- elm_object_style_set(m_back_button_details, "browser/bookmark_controlbar_back");
- evas_object_show(m_back_button_details);
- evas_object_smart_callback_add(m_back_button_details, "clicked", __back_button_clicked_cb, this);
-
- Elm_Object_Item *navi_it = elm_naviframe_item_push(m_navi_bar, item_info->url.c_str(),
- m_back_button_details, NULL, m_details_genlist, "browser_titlebar");
-
- m_details_bottom_control_bar = elm_toolbar_add(m_navi_bar);
- if (!m_details_bottom_control_bar) {
- BROWSER_LOGE("elm_toolbar_add failed");
- return;
- }
- elm_object_style_set(m_details_bottom_control_bar, "browser/default");
- elm_toolbar_shrink_mode_set(m_details_bottom_control_bar, ELM_TOOLBAR_SHRINK_EXPAND);
-
- m_delete_all_details_conbar_item = elm_toolbar_item_append(m_details_bottom_control_bar,
- NULL, BR_STRING_DELETE_ALL,
- __delete_all_details_list_conbar_item_clicked_cb, this);
- if (elm_genlist_items_count(m_details_genlist) == 0) {
- elm_object_item_disabled_set(m_delete_all_details_conbar_item, EINA_TRUE);
- }
-
- Elm_Object_Item *empty_item = elm_toolbar_item_append(m_details_bottom_control_bar, NULL, NULL, NULL, NULL);
- elm_object_item_disabled_set(empty_item, EINA_TRUE);
-
- empty_item = elm_toolbar_item_append(m_details_bottom_control_bar, NULL, NULL, NULL, NULL);
- elm_object_item_disabled_set(empty_item, EINA_TRUE);
-
- evas_object_show(m_details_bottom_control_bar);
- elm_object_item_part_content_set(navi_it, ELM_NAVIFRAME_ITEM_CONTROLBAR, m_details_bottom_control_bar);
-}
-
-void Browser_Settings_Website_Setting::_refresh_details_list(website_setting_item *item_info)
-{
- elm_genlist_clear(m_details_genlist);
-
- if (item_info->geolocation) {
- m_location_item_callback_data.type = BR_MENU_LOCATION;
- m_location_item_callback_data.cp = this;
- m_location_item_callback_data.user_data = item_info;
- m_location_item_callback_data.it = elm_genlist_item_append(m_details_genlist,
- &m_1_text_1_icon_item_class, &m_location_item_callback_data, NULL, ELM_GENLIST_ITEM_NONE,
- __details_item_selected_cb, &m_location_item_callback_data);
- }
-
- if (item_info->storage) {
- m_web_storage_item_callback_data.type = BR_MENU_WEB_STORAGE;
- m_web_storage_item_callback_data.cp = this;
- m_web_storage_item_callback_data.user_data = item_info;
- m_web_storage_item_callback_data.it = elm_genlist_item_append(m_details_genlist,
- &m_1_text_1_icon_item_class, &m_web_storage_item_callback_data, NULL, ELM_GENLIST_ITEM_NONE,
- __details_item_selected_cb, &m_web_storage_item_callback_data);
- }
-}
-
-void Browser_Settings_Website_Setting::__back_button_clicked_cb(void *data, Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
-
- if (elm_naviframe_bottom_item_get(m_navi_bar)
- != elm_naviframe_top_item_get(m_navi_bar))
- elm_naviframe_item_pop(m_navi_bar);
-}
-
-void Browser_Settings_Website_Setting::__delete_all_website_list_conbar_item_clicked_cb(void *data,
- Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
-
- website_setting->_show_delete_all_website_list_confirm_popup();
-}
-
-void Browser_Settings_Website_Setting::__delete_all_details_list_conbar_item_clicked_cb(void *data,
- Evas_Object *obj, void *event_info)
-{
- BROWSER_LOGD("[%s]", __func__);
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)data;
-
- website_setting->_show_delete_all_details_list_confirm_popup();
-}
-
-void Browser_Settings_Website_Setting::__application_cache_origin_get_cb(Eina_List* origins, void* user_data)
-{
- BROWSER_LOGD("[%s]", __func__);
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)user_data;
-
- Eina_List *list = NULL;
- void *list_data = NULL;
-
- EINA_LIST_FOREACH(origins, list, list_data) {
- BROWSER_LOGD("list_data=%d", list_data);
- if (list_data) {
- Ewk_Security_Origin *origin = (Ewk_Security_Origin *)list_data;;
- BROWSER_LOGD("<<< host = [%s]", ewk_security_origin_host_get(origin));
-
- Eina_Bool duplicated = EINA_FALSE;
- for (int i = 0 ; i < website_setting->m_website_setting_list.size() ; i++) {
- if (!website_setting->m_website_setting_list[i]->url.empty()
- && !strcmp(website_setting->m_website_setting_list[i]->url.c_str(), ewk_security_origin_host_get(origin))) {
- duplicated = EINA_TRUE;
- website_setting->m_website_setting_list[i]->storage = EINA_TRUE;
- website_setting->m_website_setting_list[i]->origin = origin;
-
- elm_genlist_item_update((Elm_Object_Item *)(website_setting->m_website_setting_list[i]->user_data));
- break;
- }
- }
-
- if (!duplicated) {
- website_setting_item *item = new(nothrow) website_setting_item;
- item->allow = EINA_FALSE;
- item->geolocation = EINA_FALSE;
- item->storage = EINA_TRUE;
- item->url = std::string(ewk_security_origin_host_get(origin));
- item->origin = origin;
-
- item->user_data = (void*)elm_genlist_item_append(website_setting->m_genlist, &website_setting->m_1_text_2_icon_item_class,
- item, NULL, ELM_GENLIST_ITEM_NONE,
- __item_selected_cb, website_setting);
- website_setting->m_website_setting_list.push_back(item);
- }
- }
- }
-
- /* enable the deleteall button at every origin callback
- because these callbacks are invoked asyncronously*/
- if (website_setting->m_website_setting_list.size() > 0) {
- if (website_setting->m_delete_all_website_list_conbar_item != NULL)
- elm_object_item_disabled_set(website_setting->m_delete_all_website_list_conbar_item, EINA_FALSE);
- }
-
- website_setting->m_is_called_appcache_cb_flag = true;
- if ((website_setting->m_is_called_appcache_cb_flag == true)
- && (website_setting->m_is_called_webstorage_cb_flag == true)
- && (website_setting->m_is_called_webdb_cb_flag == true)) {
- if (website_setting->m_website_setting_list.size() == 0) {
- website_setting->__back_button_clicked_cb(NULL, NULL, NULL);
- }
- }
-}
-
-void Browser_Settings_Website_Setting::__web_storage_origin_get_cb(Eina_List* origins, void* user_data)
-{
- BROWSER_LOGD("[%s]", __func__);
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)user_data;
-
- Eina_List *list = NULL;
- void *list_data = NULL;
-
- EINA_LIST_FOREACH(origins, list, list_data) {
- BROWSER_LOGD("list_data=%d", list_data);
- if (list_data) {
- Ewk_Security_Origin *origin = (Ewk_Security_Origin *)list_data;;
- BROWSER_LOGD("<<< host = [%s]", ewk_security_origin_host_get(origin));
-
- Eina_Bool duplicated = EINA_FALSE;
- for (int i = 0 ; i < website_setting->m_website_setting_list.size() ; i++) {
- if (!website_setting->m_website_setting_list[i]->url.empty()
- && !strcmp(website_setting->m_website_setting_list[i]->url.c_str(), ewk_security_origin_host_get(origin))) {
- duplicated = EINA_TRUE;
- website_setting->m_website_setting_list[i]->storage = EINA_TRUE;
- website_setting->m_website_setting_list[i]->origin = origin;
-
- elm_genlist_item_update((Elm_Object_Item *)(website_setting->m_website_setting_list[i]->user_data));
- break;
- }
- }
-
- if (!duplicated) {
- website_setting_item *item = new(nothrow) website_setting_item;
- item->allow = EINA_FALSE;
- item->geolocation = EINA_FALSE;
- item->storage = EINA_TRUE;
- item->url = std::string(ewk_security_origin_host_get(origin));
- item->origin = origin;
-
- item->user_data = (void*)elm_genlist_item_append(website_setting->m_genlist, &website_setting->m_1_text_2_icon_item_class,
- item, NULL, ELM_GENLIST_ITEM_NONE,
- __item_selected_cb, website_setting);
- website_setting->m_website_setting_list.push_back(item);
- }
- }
- }
-
- /* enable the deleteall button at every origin callback
- because these callbacks are invoked asyncronously*/
- if (website_setting->m_website_setting_list.size() > 0) {
- if (website_setting->m_delete_all_website_list_conbar_item != NULL)
- elm_object_item_disabled_set(website_setting->m_delete_all_website_list_conbar_item, EINA_FALSE);
- }
-
- website_setting->m_is_called_webstorage_cb_flag = true;
- if ((website_setting->m_is_called_appcache_cb_flag == true)
- && (website_setting->m_is_called_webstorage_cb_flag == true)
- && (website_setting->m_is_called_webdb_cb_flag == true)) {
- if (website_setting->m_website_setting_list.size() == 0) {
- website_setting->__back_button_clicked_cb(NULL, NULL, NULL);
- }
- }
-}
-
-void Browser_Settings_Website_Setting::__web_database_origin_get_cb(Eina_List* origins, void* user_data)
-{
- BROWSER_LOGD("[%s]", __func__);
- Browser_Settings_Website_Setting *website_setting = (Browser_Settings_Website_Setting *)user_data;
-
- Eina_List *list = NULL;
- void *list_data = NULL;
-
- EINA_LIST_FOREACH(origins, list, list_data) {
- BROWSER_LOGD("list_data=%d", list_data);
- if (list_data) {
- Ewk_Security_Origin *origin = (Ewk_Security_Origin *)list_data;
- BROWSER_LOGD("<<< host = [%s]", ewk_security_origin_host_get(origin));
-
- Eina_Bool duplicated = EINA_FALSE;
- for (int i = 0 ; i < website_setting->m_website_setting_list.size() ; i++) {
- if (!website_setting->m_website_setting_list[i]->url.empty()
- && !strcmp(website_setting->m_website_setting_list[i]->url.c_str(), ewk_security_origin_host_get(origin))) {
- duplicated = EINA_TRUE;
- website_setting->m_website_setting_list[i]->storage = EINA_TRUE;
- website_setting->m_website_setting_list[i]->origin = origin;
-
- elm_genlist_item_update((Elm_Object_Item *)(website_setting->m_website_setting_list[i]->user_data));
- break;
- }
- }
-
- if (!duplicated) {
- website_setting_item *item = new(nothrow) website_setting_item;
- item->allow = EINA_FALSE;
- item->geolocation = EINA_FALSE;
- item->storage = EINA_TRUE;
- item->url = std::string(ewk_security_origin_host_get(origin));
- item->origin = origin;
-
- item->user_data = (void*)elm_genlist_item_append(website_setting->m_genlist, &website_setting->m_1_text_2_icon_item_class,
- item, NULL, ELM_GENLIST_ITEM_NONE,
- __item_selected_cb, website_setting);
- website_setting->m_website_setting_list.push_back(item);
-
- }
- }
- }
-
- /* enable the deleteall button at every origin callback
- because these callbacks are invoked asyncronously*/
- if (website_setting->m_website_setting_list.size() > 0) {
- if (website_setting->m_delete_all_website_list_conbar_item != NULL)
- elm_object_item_disabled_set(website_setting->m_delete_all_website_list_conbar_item, EINA_FALSE);
- }
-
- website_setting->m_is_called_webdb_cb_flag = true;
- if ((website_setting->m_is_called_appcache_cb_flag == true)
- && (website_setting->m_is_called_webstorage_cb_flag == true)
- && (website_setting->m_is_called_webdb_cb_flag == true)) {
- if (website_setting->m_website_setting_list.size() == 0) {
- website_setting->__back_button_clicked_cb(NULL, NULL, NULL);
- }
- }
-}
-
-void Browser_Settings_Website_Setting::_website_list_get(void)
-{
- BROWSER_LOGD("[%s]", __func__);
- m_is_called_appcache_cb_flag = false;
- m_is_called_webstorage_cb_flag = false;
- m_is_called_webdb_cb_flag = false;
- Ewk_Context *context = ewk_context_default_get();
- ewk_context_application_cache_origins_get(context, __application_cache_origin_get_cb, this);
- ewk_context_web_storage_origins_get(context, __web_storage_origin_get_cb, this);
- ewk_context_web_database_origins_get(context, __web_database_origin_get_cb, this);
-
- Browser_Geolocation_DB geolocation_db;
-
- geolocation_db.get_geolocation_info_list(m_geolocation_list);
-
- BROWSER_LOGD("geolocation_list size=%d", m_geolocation_list.size());
-
- for (int i = 0 ; i < m_geolocation_list.size() ; i++) {
- m_geolocation_list[i]->user_data = (void* )elm_genlist_item_append(m_genlist, &m_1_text_2_icon_item_class,
- m_geolocation_list[i], NULL, ELM_GENLIST_ITEM_NONE,
- __item_selected_cb, this);
-
- m_website_setting_list.push_back((website_setting_item *)(m_geolocation_list[i]));
- }
-}
-
-void Browser_Settings_Website_Setting::_refresh_website_list(void)
-{
- BROWSER_LOGD("[%s]", __func__);
-
- for (int i = 0 ; i < m_website_setting_list.size() ; i++) {
- if (m_website_setting_list[i])
- delete m_website_setting_list[i];
- }
- m_website_setting_list.clear();
- m_geolocation_list.clear();
-
- elm_genlist_clear(m_genlist);
-
- _website_list_get();
-
- if (m_website_setting_list.size() == 0) {
- if (m_delete_all_website_list_conbar_item != NULL)
- elm_object_item_disabled_set(m_delete_all_website_list_conbar_item, EINA_TRUE);
- }
-}
-
-Eina_Bool Browser_Settings_Website_Setting::_create_main_layout(void)
-{
- BROWSER_LOGD("[%s]", __func__);
-
- m_genlist = elm_genlist_add(m_navi_bar);
- if (!m_genlist) {
- BROWSER_LOGE("elm_genlist_add failed");
- return EINA_FALSE;
- }
-
- evas_object_show(m_genlist);
-
- m_back_button = elm_button_add(m_genlist);
- if (!m_back_button) {
- BROWSER_LOGE("elm_button_add failed");
- return EINA_FALSE;
- }
- elm_object_style_set(m_back_button, "browser/bookmark_controlbar_back");
- evas_object_show(m_back_button);
- evas_object_smart_callback_add(m_back_button, "clicked", __back_button_clicked_cb, this);
-
- m_1_text_2_icon_item_class.item_style = "1text.3icon.2";
- m_1_text_2_icon_item_class.func.text_get = __genlist_label_get;
- m_1_text_2_icon_item_class.func.content_get = __genlist_icon_get;
- m_1_text_2_icon_item_class.func.state_get = NULL;
- m_1_text_2_icon_item_class.func.del = NULL;
-
- _website_list_get();
-
- Elm_Object_Item *navi_it = elm_naviframe_item_push(m_navi_bar, BR_STRING_WEBSITE_SETTINGS,
- m_back_button, NULL, m_genlist, "browser_titlebar");
-
- m_bottom_control_bar = elm_toolbar_add(m_navi_bar);
- if (!m_bottom_control_bar) {
- BROWSER_LOGE("elm_toolbar_add failed");
- return EINA_FALSE;
- }
- elm_object_style_set(m_bottom_control_bar, "browser/default");
- elm_toolbar_shrink_mode_set(m_bottom_control_bar, ELM_TOOLBAR_SHRINK_EXPAND);
-
- m_delete_all_website_list_conbar_item = elm_toolbar_item_append(m_bottom_control_bar,
- NULL, BR_STRING_DELETE_ALL,
- __delete_all_website_list_conbar_item_clicked_cb, this);
-
- if (!m_delete_all_website_list_conbar_item) {
- BROWSER_LOGE("elm_toolbar_item_append failed");
- return EINA_FALSE;
- }
-
- if (m_website_setting_list.size() == 0) {
- elm_object_item_disabled_set(m_delete_all_website_list_conbar_item, EINA_TRUE);
- }
-
- Elm_Object_Item *empty_item = elm_toolbar_item_append(m_bottom_control_bar, NULL, NULL, NULL, NULL);
- elm_object_item_disabled_set(empty_item, EINA_TRUE);
-
- empty_item = elm_toolbar_item_append(m_bottom_control_bar, NULL, NULL, NULL, NULL);
- elm_object_item_disabled_set(empty_item, EINA_TRUE);
-
- evas_object_show(m_bottom_control_bar);
- elm_object_item_part_content_set(navi_it, ELM_NAVIFRAME_ITEM_CONTROLBAR, m_bottom_control_bar);
-
- return EINA_TRUE;
-}
-
-
-
+++ /dev/null
-eval '(exit $?0)' && eval 'exec perl -wS "$0" ${1+"$@"}'
- & eval 'exec perl -wS "$0" $argv:q'
- if 0;
-# Generate a release announcement message.
-
-my $VERSION = '2012-04-19 14:36'; # UTC
-# The definition above must lie within the first 8 lines in order
-# for the Emacs time-stamp write hook (at end) to update it.
-# If you change this file with Emacs, please let the write hook
-# do its job. Otherwise, update this string manually.
-
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# Written by Jim Meyering
-
-use strict;
-
-use Getopt::Long;
-use Digest::MD5;
-eval { require Digest::SHA; }
- or eval 'use Digest::SHA1';
-use POSIX qw(strftime);
-
-(my $ME = $0) =~ s|.*/||;
-
-my %valid_release_types = map {$_ => 1} qw (alpha beta stable);
-my @archive_suffixes = ('tar.gz', 'tar.bz2', 'tar.lzma', 'tar.xz');
-
-sub usage ($)
-{
- my ($exit_code) = @_;
- my $STREAM = ($exit_code == 0 ? *STDOUT : *STDERR);
- if ($exit_code != 0)
- {
- print $STREAM "Try '$ME --help' for more information.\n";
- }
- else
- {
- my @types = sort keys %valid_release_types;
- print $STREAM <<EOF;
-Usage: $ME [OPTIONS]
-Generate an announcement message.
-
-OPTIONS:
-
-These options must be specified:
-
- --release-type=TYPE TYPE must be one of @types
- --package-name=PACKAGE_NAME
- --previous-version=VER
- --current-version=VER
- --gpg-key-id=ID The GnuPG ID of the key used to sign the tarballs
- --url-directory=URL_DIR
-
-The following are optional:
-
- --news=NEWS_FILE
- --bootstrap-tools=TOOL_LIST a comma-separated list of tools, e.g.,
- autoconf,automake,bison,gnulib
- --gnulib-version=VERSION report VERSION as the gnulib version, where
- VERSION is the result of running git describe
- in the gnulib source directory.
- required if gnulib is in TOOL_LIST.
- --no-print-checksums do not emit MD5 or SHA1 checksums
- --archive-suffix=SUF add SUF to the list of archive suffixes
- --mail-headers=HEADERS a space-separated list of mail headers, e.g.,
- To: x\@example.com Cc: y-announce\@example.com,...
-
- --help display this help and exit
- --version output version information and exit
-
-EOF
- }
- exit $exit_code;
-}
-
-
-=item C<%size> = C<sizes (@file)>
-
-Compute the sizes of the C<@file> and return them as a hash. Return
-C<undef> if one of the computation failed.
-
-=cut
-
-sub sizes (@)
-{
- my (@file) = @_;
-
- my $fail = 0;
- my %res;
- foreach my $f (@file)
- {
- my $cmd = "du --human $f";
- my $t = `$cmd`;
- # FIXME-someday: give a better diagnostic, a la $PROCESS_STATUS
- $@
- and (warn "$ME: command failed: '$cmd'\n"), $fail = 1;
- chomp $t;
- $t =~ s/^([\d.]+[MkK]).*/${1}B/;
- $res{$f} = $t;
- }
- return $fail ? undef : %res;
-}
-
-=item C<print_locations ($title, \@url, \%size, @file)
-
-Print a section C<$title> dedicated to the list of <@file>, which
-sizes are stored in C<%size>, and which are available from the C<@url>.
-
-=cut
-
-sub print_locations ($\@\%@)
-{
- my ($title, $url, $size, @file) = @_;
- print "Here are the $title:\n";
- foreach my $url (@{$url})
- {
- for my $file (@file)
- {
- print " $url/$file";
- print " (", $$size{$file}, ")"
- if exists $$size{$file};
- print "\n";
- }
- }
- print "\n";
-}
-
-=item C<print_checksums (@file)
-
-Print the MD5 and SHA1 signature section for each C<@file>.
-
-=cut
-
-sub print_checksums (@)
-{
- my (@file) = @_;
-
- print "Here are the MD5 and SHA1 checksums:\n";
- print "\n";
-
- foreach my $meth (qw (md5 sha1))
- {
- foreach my $f (@file)
- {
- open IN, '<', $f
- or die "$ME: $f: cannot open for reading: $!\n";
- binmode IN;
- my $dig =
- ($meth eq 'md5'
- ? Digest::MD5->new->addfile(*IN)->hexdigest
- : Digest::SHA1->new->addfile(*IN)->hexdigest);
- close IN;
- print "$dig $f\n";
- }
- }
- print "\n";
-}
-
-=item C<print_news_deltas ($news_file, $prev_version, $curr_version)
-
-Print the section of the NEWS file C<$news_file> addressing changes
-between versions C<$prev_version> and C<$curr_version>.
-
-=cut
-
-sub print_news_deltas ($$$)
-{
- my ($news_file, $prev_version, $curr_version) = @_;
-
- my $news_name = $news_file;
- $news_name =~ s|^\./||;
-
- print "\n$news_name\n\n";
-
- # Print all lines from $news_file, starting with the first one
- # that mentions $curr_version up to but not including
- # the first occurrence of $prev_version.
- my $in_items;
-
- my $re_prefix = qr/(?:\* )?(?:Noteworthy c|Major c|C)(?i:hanges)/;
-
- my $found_news;
- open NEWS, '<', $news_file
- or die "$ME: $news_file: cannot open for reading: $!\n";
- while (defined (my $line = <NEWS>))
- {
- if ( ! $in_items)
- {
- # Match lines like these:
- # * Major changes in release 5.0.1:
- # * Noteworthy changes in release 6.6 (2006-11-22) [stable]
- $line =~ /^$re_prefix.*(?:[^\d.]|$)\Q$curr_version\E(?:[^\d.]|$)/o
- or next;
- $in_items = 1;
- print $line;
- }
- else
- {
- # This regexp must not match version numbers in NEWS items.
- # For example, they might well say "introduced in 4.5.5",
- # and we don't want that to match.
- $line =~ /^$re_prefix.*(?:[^\d.]|$)\Q$prev_version\E(?:[^\d.]|$)/o
- and last;
- print $line;
- $line =~ /\S/
- and $found_news = 1;
- }
- }
- close NEWS;
-
- $in_items
- or die "$ME: $news_file: no matching lines for '$curr_version'\n";
- $found_news
- or die "$ME: $news_file: no news item found for '$curr_version'\n";
-}
-
-sub print_changelog_deltas ($$)
-{
- my ($package_name, $prev_version) = @_;
-
- # Print new ChangeLog entries.
-
- # First find all CVS-controlled ChangeLog files.
- use File::Find;
- my @changelog;
- find ({wanted => sub {$_ eq 'ChangeLog' && -d 'CVS'
- and push @changelog, $File::Find::name}},
- '.');
-
- # If there are no ChangeLog files, we're done.
- @changelog
- or return;
- my %changelog = map {$_ => 1} @changelog;
-
- # Reorder the list of files so that if there are ChangeLog
- # files in the specified directories, they're listed first,
- # in this order:
- my @dir = qw ( . src lib m4 config doc );
-
- # A typical @changelog array might look like this:
- # ./ChangeLog
- # ./po/ChangeLog
- # ./m4/ChangeLog
- # ./lib/ChangeLog
- # ./doc/ChangeLog
- # ./config/ChangeLog
- my @reordered;
- foreach my $d (@dir)
- {
- my $dot_slash = $d eq '.' ? $d : "./$d";
- my $target = "$dot_slash/ChangeLog";
- delete $changelog{$target}
- and push @reordered, $target;
- }
-
- # Append any remaining ChangeLog files.
- push @reordered, sort keys %changelog;
-
- # Remove leading './'.
- @reordered = map { s!^\./!!; $_ } @reordered;
-
- print "\nChangeLog entries:\n\n";
- # print join ("\n", @reordered), "\n";
-
- $prev_version =~ s/\./_/g;
- my $prev_cvs_tag = "\U$package_name\E-$prev_version";
-
- my $cmd = "cvs -n diff -u -r$prev_cvs_tag -rHEAD @reordered";
- open DIFF, '-|', $cmd
- or die "$ME: cannot run '$cmd': $!\n";
- # Print two types of lines, making minor changes:
- # Lines starting with '+++ ', e.g.,
- # +++ ChangeLog 22 Feb 2003 16:52:51 -0000 1.247
- # and those starting with '+'.
- # Don't print the others.
- my $prev_printed_line_empty = 1;
- while (defined (my $line = <DIFF>))
- {
- if ($line =~ /^\+\+\+ /)
- {
- my $separator = "*"x70 ."\n";
- $line =~ s///;
- $line =~ s/\s.*//;
- $prev_printed_line_empty
- or print "\n";
- print $separator, $line, $separator;
- }
- elsif ($line =~ /^\+/)
- {
- $line =~ s///;
- print $line;
- $prev_printed_line_empty = ($line =~ /^$/);
- }
- }
- close DIFF;
-
- # The exit code should be 1.
- # Allow in case there are no modified ChangeLog entries.
- $? == 256 || $? == 128
- or warn "$ME: warning: '$cmd' had unexpected exit code or signal ($?)\n";
-}
-
-sub get_tool_versions ($$)
-{
- my ($tool_list, $gnulib_version) = @_;
- @$tool_list
- or return ();
-
- my $fail;
- my @tool_version_pair;
- foreach my $t (@$tool_list)
- {
- if ($t eq 'gnulib')
- {
- push @tool_version_pair, ucfirst $t . ' ' . $gnulib_version;
- next;
- }
- # Assume that the last "word" on the first line of
- # 'tool --version' output is the version string.
- my ($first_line, undef) = split ("\n", `$t --version`);
- if ($first_line =~ /.* (\d[\w.-]+)$/)
- {
- $t = ucfirst $t;
- push @tool_version_pair, "$t $1";
- }
- else
- {
- defined $first_line
- and $first_line = '';
- warn "$ME: $t: unexpected --version output\n:$first_line";
- $fail = 1;
- }
- }
-
- $fail
- and exit 1;
-
- return @tool_version_pair;
-}
-
-{
- # Neutralize the locale, so that, for instance, "du" does not
- # issue "1,2" instead of "1.2", what confuses our regexps.
- $ENV{LC_ALL} = "C";
-
- my $mail_headers;
- my $release_type;
- my $package_name;
- my $prev_version;
- my $curr_version;
- my $gpg_key_id;
- my @url_dir_list;
- my @news_file;
- my $bootstrap_tools;
- my $gnulib_version;
- my $print_checksums_p = 1;
-
- GetOptions
- (
- 'mail-headers=s' => \$mail_headers,
- 'release-type=s' => \$release_type,
- 'package-name=s' => \$package_name,
- 'previous-version=s' => \$prev_version,
- 'current-version=s' => \$curr_version,
- 'gpg-key-id=s' => \$gpg_key_id,
- 'url-directory=s' => \@url_dir_list,
- 'news=s' => \@news_file,
- 'bootstrap-tools=s' => \$bootstrap_tools,
- 'gnulib-version=s' => \$gnulib_version,
- 'print-checksums!' => \$print_checksums_p,
- 'archive-suffix=s' => \@archive_suffixes,
-
- help => sub { usage 0 },
- version => sub { print "$ME version $VERSION\n"; exit },
- ) or usage 1;
-
- my $fail = 0;
- # Ensure that sure each required option is specified.
- $release_type
- or (warn "$ME: release type not specified\n"), $fail = 1;
- $package_name
- or (warn "$ME: package name not specified\n"), $fail = 1;
- $prev_version
- or (warn "$ME: previous version string not specified\n"), $fail = 1;
- $curr_version
- or (warn "$ME: current version string not specified\n"), $fail = 1;
- $gpg_key_id
- or (warn "$ME: GnuPG key ID not specified\n"), $fail = 1;
- @url_dir_list
- or (warn "$ME: URL directory name(s) not specified\n"), $fail = 1;
-
- my @tool_list = split ',', $bootstrap_tools;
-
- grep (/^gnulib$/, @tool_list) ^ defined $gnulib_version
- and (warn "$ME: when specifying gnulib as a tool, you must also specify\n"
- . "--gnulib-version=V, where V is the result of running git describe\n"
- . "in the gnulib source directory.\n"), $fail = 1;
-
- exists $valid_release_types{$release_type}
- or (warn "$ME: '$release_type': invalid release type\n"), $fail = 1;
-
- @ARGV
- and (warn "$ME: too many arguments:\n", join ("\n", @ARGV), "\n"),
- $fail = 1;
- $fail
- and usage 1;
-
- my $my_distdir = "$package_name-$curr_version";
-
- my $xd = "$package_name-$prev_version-$curr_version.xdelta";
-
- my @candidates = map { "$my_distdir.$_" } @archive_suffixes;
- my @tarballs = grep {-f $_} @candidates;
-
- @tarballs
- or die "$ME: none of " . join(', ', @candidates) . " were found\n";
- my @sizable = @tarballs;
- -f $xd
- and push @sizable, $xd;
- my %size = sizes (@sizable);
- %size
- or exit 1;
-
- my $headers = '';
- if (defined $mail_headers)
- {
- ($headers = $mail_headers) =~ s/\s+(\S+:)/\n$1/g;
- $headers .= "\n";
- }
-
- # The markup is escaped as <\# so that when this script is sent by
- # mail (or part of a diff), Gnus is not triggered.
- print <<EOF;
-
-${headers}Subject: $my_distdir released [$release_type]
-
-<\#secure method=pgpmime mode=sign>
-
-FIXME: put comments here
-
-EOF
-
- if (@url_dir_list == 1 && @tarballs == 1)
- {
- # When there's only one tarball and one URL, use a more concise form.
- my $m = "$url_dir_list[0]/$tarballs[0]";
- print "Here are the compressed sources and a GPG detached signature[*]:\n"
- . " $m\n"
- . " $m.sig\n\n";
- }
- else
- {
- print_locations ("compressed sources", @url_dir_list, %size, @tarballs);
- -f $xd
- and print_locations ("xdelta diffs (useful? if so, "
- . "please tell bug-gnulib\@gnu.org)",
- @url_dir_list, %size, $xd);
- my @sig_files = map { "$_.sig" } @tarballs;
- print_locations ("GPG detached signatures[*]", @url_dir_list, %size,
- @sig_files);
- }
-
- if ($url_dir_list[0] =~ "gnu\.org")
- {
- print "Use a mirror for higher download bandwidth:\n";
- if (@tarballs == 1 && $url_dir_list[0] =~ m!http://ftp\.gnu\.org/gnu/!)
- {
- (my $m = "$url_dir_list[0]/$tarballs[0]")
- =~ s!http://ftp\.gnu\.org/gnu/!http://ftpmirror\.gnu\.org/!;
- print " $m\n"
- . " $m.sig\n\n";
-
- }
- else
- {
- print " http://www.gnu.org/order/ftp.html\n\n";
- }
- }
-
- $print_checksums_p
- and print_checksums (@sizable);
-
- print <<EOF;
-[*] Use a .sig file to verify that the corresponding file (without the
-.sig suffix) is intact. First, be sure to download both the .sig file
-and the corresponding tarball. Then, run a command like this:
-
- gpg --verify $tarballs[0].sig
-
-If that command fails because you don't have the required public key,
-then run this command to import it:
-
- gpg --keyserver keys.gnupg.net --recv-keys $gpg_key_id
-
-and rerun the 'gpg --verify' command.
-EOF
-
- my @tool_versions = get_tool_versions (\@tool_list, $gnulib_version);
- @tool_versions
- and print "\nThis release was bootstrapped with the following tools:",
- join ('', map {"\n $_"} @tool_versions), "\n";
-
- print_news_deltas ($_, $prev_version, $curr_version)
- foreach @news_file;
-
- $release_type eq 'stable'
- or print_changelog_deltas ($package_name, $prev_version);
-
- exit 0;
-}
-
-### Setup "GNU" style for perl-mode and cperl-mode.
-## Local Variables:
-## mode: perl
-## perl-indent-level: 2
-## perl-continued-statement-offset: 2
-## perl-continued-brace-offset: 0
-## perl-brace-offset: 0
-## perl-brace-imaginary-offset: 0
-## perl-label-offset: -2
-## perl-extra-newline-before-brace: t
-## perl-merge-trailing-else: nil
-## eval: (add-hook 'write-file-hooks 'time-stamp)
-## time-stamp-start: "my $VERSION = '"
-## time-stamp-format: "%:y-%02m-%02d %02H:%02M"
-## time-stamp-time-zone: "UTC"
-## time-stamp-end: "'; # UTC"
-## End:
+++ /dev/null
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
-
-timestamp='2012-02-10'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner. Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- sh5el) machine=sh5le-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ELF__
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit ;;
- *:OpenBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
- exit ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit ;;
- *:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
- exit ;;
- macppc:MirBSD:*:*)
- echo powerpc-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
- exitcode=$?
- trap '' 0
- exit $exitcode ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
- echo arm-unknown-riscos
- exit ;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit ;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7; exit ;;
- esac ;;
- s390x:SunOS:*:*)
- echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
- echo i386-pc-auroraux${UNAME_RELEASE}
- exit ;;
- i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
- eval $set_cc_for_build
- SUN_ARCH="i386"
- # If there is a compiler, see if it is configured for 64-bit objects.
- # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
- # This test works for both compilers.
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- SUN_ARCH="x86_64"
- fi
- fi
- echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
- exit ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
- then
- echo "$SYSTEM_NAME"
- else
- echo rs6000-ibm-aix3.2.5
- fi
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit ;;
- *:AIX:*:[4567])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- eval $set_cc_for_build
-
- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
- # generating 64-bit code. GNU and HP use different nomenclature:
- #
- # $ CC_FOR_BUILD=cc ./config.guess
- # => hppa2.0w-hp-hpux11.23
- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
- # => hppa64-hp-hpux11.23
-
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep -q __LP64__
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo unknown-hitachi-hiuxwe2
- exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:FreeBSD:*:*)
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- case ${UNAME_PROCESSOR} in
- amd64)
- echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- *)
- echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- esac
- exit ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit ;;
- *:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:MSYS*:*)
- echo ${UNAME_MACHINE}-pc-msys
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
- exit ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit ;;
- *:Interix*:*)
- case ${UNAME_MACHINE} in
- x86)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- authenticamd | genuineintel | EM64T)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
- IA64)
- echo ia64-unknown-interix${UNAME_RELEASE}
- exit ;;
- esac ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- 8664:Windows_NT:*)
- echo x86_64-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit ;;
- amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
- echo x86_64-unknown-cygwin
- exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit ;;
- aarch64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- aarch64_be:Linux:*:*)
- UNAME_MACHINE=aarch64_be
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep -q ld.so.1
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit ;;
- arm*:Linux:*:*)
- eval $set_cc_for_build
- if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ARM_EABI__
- then
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- else
- if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep -q __ARM_PCS_VFP
- then
- echo ${UNAME_MACHINE}-unknown-linux-gnueabi
- else
- echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
- fi
- fi
- exit ;;
- avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- cris:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-gnu
- exit ;;
- crisv32:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-gnu
- exit ;;
- frv:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- hexagon:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- i*86:Linux:*:*)
- LIBC=gnu
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
- exit ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- mips:Linux:*:* | mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef ${UNAME_MACHINE}
- #undef ${UNAME_MACHINE}el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=${UNAME_MACHINE}el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=${UNAME_MACHINE}
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- or32:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- padre:Linux:*:*)
- echo sparc-unknown-linux-gnu
- exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- tile*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
- exit ;;
- x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- xtensa*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit ;;
- i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
- exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit ;;
- i*86:*:5:[678]*)
- # UnixWare 7.x, OpenUNIX and OpenServer 6.
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i586.
- # Note: whatever this is, it MUST be the same as what config.sub
- # prints for the "djgpp" host, or else GDB configury will decide that
- # this is a cross-build.
- echo i586-pc-msdosdjgpp
- exit ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit ;;
- M68*:*:R3V[5678]*:*)
- test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4; exit; } ;;
- NCR*:*:4.2:* | MPRAS*:*:4.2:*)
- OS_REL='.3'
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit ;;
- i*86:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo ${UNAME_MACHINE}-stratus-vos
- exit ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit ;;
- BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
- echo i586-pc-haiku
- exit ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-7:SUPER-UX:*:*)
- echo sx7-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8:SUPER-UX:*:*)
- echo sx8-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-8R:SUPER-UX:*:*)
- echo sx8r-nec-superux${UNAME_RELEASE}
- exit ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Darwin:*:*)
- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- i386)
- eval $set_cc_for_build
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- UNAME_PROCESSOR="x86_64"
- fi
- fi ;;
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit ;;
- NEO-?:NONSTOP_KERNEL:*:*)
- echo neo-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit ;;
- *:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit ;;
- *:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms ; exit ;;
- I*) echo ia64-dec-vms ; exit ;;
- V*) echo vax-dec-vms ; exit ;;
- esac ;;
- *:XENIX:*:SysV)
- echo i386-pc-xenix
- exit ;;
- i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
- exit ;;
- i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
- exit ;;
- i*86:AROS:*:*)
- echo ${UNAME_MACHINE}-pc-aros
- exit ;;
- x86_64:VMkernel:*:*)
- echo ${UNAME_MACHINE}-unknown-esx
- exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
-and
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-# Output a system dependent set of variables, describing how to set the
-# run time search path of shared libraries in an executable.
-#
-# Copyright 1996-2012 Free Software Foundation, Inc.
-# Taken from GNU libtool, 2001
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-#
-# The first argument passed to this file is the canonical host specification,
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-# should be set by the caller.
-#
-# The set of defined variables is at the end of this script.
-
-# Known limitations:
-# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
-# than 256 bytes, otherwise the compiler driver will dump core. The only
-# known workaround is to choose shorter directory names for the build
-# directory and/or the installation directory.
-
-# All known linkers require a '.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-shrext=.so
-
-host="$1"
-host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-# Code taken from libtool.m4's _LT_CC_BASENAME.
-
-for cc_temp in $CC""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
-
-# Code taken from libtool.m4's _LT_COMPILER_PIC.
-
-wl=
-if test "$GCC" = yes; then
- wl='-Wl,'
-else
- case "$host_os" in
- aix*)
- wl='-Wl,'
- ;;
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- ;;
- hpux9* | hpux10* | hpux11*)
- wl='-Wl,'
- ;;
- irix5* | irix6* | nonstopux*)
- wl='-Wl,'
- ;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- case $cc_basename in
- ecc*)
- wl='-Wl,'
- ;;
- icc* | ifort*)
- wl='-Wl,'
- ;;
- lf95*)
- wl='-Wl,'
- ;;
- nagfor*)
- wl='-Wl,-Wl,,'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- wl='-Wl,'
- ;;
- ccc*)
- wl='-Wl,'
- ;;
- xl* | bgxl* | bgf* | mpixl*)
- wl='-Wl,'
- ;;
- como)
- wl='-lopt='
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ F* | *Sun*Fortran*)
- wl=
- ;;
- *Sun\ C*)
- wl='-Wl,'
- ;;
- esac
- ;;
- esac
- ;;
- newsos6)
- ;;
- *nto* | *qnx*)
- ;;
- osf3* | osf4* | osf5*)
- wl='-Wl,'
- ;;
- rdos*)
- ;;
- solaris*)
- case $cc_basename in
- f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- wl='-Qoption ld '
- ;;
- *)
- wl='-Wl,'
- ;;
- esac
- ;;
- sunos4*)
- wl='-Qoption ld '
- ;;
- sysv4 | sysv4.2uw2* | sysv4.3*)
- wl='-Wl,'
- ;;
- sysv4*MP*)
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- wl='-Wl,'
- ;;
- unicos*)
- wl='-Wl,'
- ;;
- uts4*)
- ;;
- esac
-fi
-
-# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
-
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-
-case "$host_os" in
- cygwin* | mingw* | pw32* | cegcc*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes; then
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- # Unlike libtool, we use -rpath here, not --rpath, since the documented
- # option of GNU ld is called -rpath, not --rpath.
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- case "$host_os" in
- aix[3-9]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs=no
- fi
- ;;
- amigaos*)
- case "$host_cpu" in
- powerpc)
- ;;
- m68k)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- haiku*)
- ;;
- interix[3-9]*)
- hardcode_direct=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- netbsd*)
- ;;
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs=no
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- ;;
- sunos4*)
- hardcode_direct=yes
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- esac
- if test "$ld_shlibs" = no; then
- hardcode_libdir_flag_spec=
- fi
-else
- case "$host_os" in
- aix3*)
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- else
- aix_use_runtimelinking=no
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
- fi
- hardcode_direct=yes
- hardcode_libdir_separator=':'
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct=unsupported
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- ;;
- esac
- fi
- # Begin _LT_AC_SYS_LIBPATH_AIX.
- echo 'int main () { return 0; }' > conftest.c
- ${CC} ${LDFLAGS} conftest.c -o conftest
- aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
- if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
-}'`
- fi
- if test -z "$aix_libpath"; then
- aix_libpath="/usr/lib:/lib"
- fi
- rm -f conftest.c conftest
- # End _LT_AC_SYS_LIBPATH_AIX.
- if test "$aix_use_runtimelinking" = yes; then
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- else
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- fi
- fi
- ;;
- amigaos*)
- case "$host_cpu" in
- powerpc)
- ;;
- m68k)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
- bsdi[45]*)
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- hardcode_libdir_flag_spec=' '
- libext=lib
- ;;
- darwin* | rhapsody*)
- hardcode_direct=no
- if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
- :
- else
- ld_shlibs=no
- fi
- ;;
- dgux*)
- hardcode_libdir_flag_spec='-L$libdir'
- ;;
- freebsd2.2*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- freebsd2*)
- hardcode_direct=yes
- hardcode_minus_L=yes
- ;;
- freebsd* | dragonfly*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- hpux9*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- hpux10*)
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- fi
- ;;
- hpux11*)
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct=no
- ;;
- *)
- hardcode_direct=yes
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- esac
- fi
- ;;
- irix5* | irix6* | nonstopux*)
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- netbsd*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- newsos6)
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- *nto* | *qnx*)
- ;;
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct=yes
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- else
- case "$host_os" in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs=no
- fi
- ;;
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- osf3*)
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
- osf4* | osf5*)
- if test "$GCC" = yes; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- # Both cc and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- hardcode_libdir_separator=:
- ;;
- solaris*)
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- sunos4*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- ;;
- sysv4)
- case $host_vendor in
- sni)
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- hardcode_direct=no
- ;;
- motorola)
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- ;;
- sysv4.3*)
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- ld_shlibs=yes
- fi
- ;;
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- ;;
- sysv5* | sco3.2v5* | sco5v6*)
- hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- hardcode_libdir_separator=':'
- ;;
- uts4*)
- hardcode_libdir_flag_spec='-L$libdir'
- ;;
- *)
- ld_shlibs=no
- ;;
- esac
-fi
-
-# Check dynamic linker characteristics
-# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
-# Unlike libtool.m4, here we don't care about _all_ names of the library, but
-# only about the one the linker finds when passed -lNAME. This is the last
-# element of library_names_spec in libtool.m4, or possibly two of them if the
-# linker has special search rules.
-library_names_spec= # the last element of library_names_spec in libtool.m4
-libname_spec='lib$name'
-case "$host_os" in
- aix3*)
- library_names_spec='$libname.a'
- ;;
- aix[4-9]*)
- library_names_spec='$libname$shrext'
- ;;
- amigaos*)
- case "$host_cpu" in
- powerpc*)
- library_names_spec='$libname$shrext' ;;
- m68k)
- library_names_spec='$libname.a' ;;
- esac
- ;;
- beos*)
- library_names_spec='$libname$shrext'
- ;;
- bsdi[45]*)
- library_names_spec='$libname$shrext'
- ;;
- cygwin* | mingw* | pw32* | cegcc*)
- shrext=.dll
- library_names_spec='$libname.dll.a $libname.lib'
- ;;
- darwin* | rhapsody*)
- shrext=.dylib
- library_names_spec='$libname$shrext'
- ;;
- dgux*)
- library_names_spec='$libname$shrext'
- ;;
- freebsd* | dragonfly*)
- case "$host_os" in
- freebsd[123]*)
- library_names_spec='$libname$shrext$versuffix' ;;
- *)
- library_names_spec='$libname$shrext' ;;
- esac
- ;;
- gnu*)
- library_names_spec='$libname$shrext'
- ;;
- haiku*)
- library_names_spec='$libname$shrext'
- ;;
- hpux9* | hpux10* | hpux11*)
- case $host_cpu in
- ia64*)
- shrext=.so
- ;;
- hppa*64*)
- shrext=.sl
- ;;
- *)
- shrext=.sl
- ;;
- esac
- library_names_spec='$libname$shrext'
- ;;
- interix[3-9]*)
- library_names_spec='$libname$shrext'
- ;;
- irix5* | irix6* | nonstopux*)
- library_names_spec='$libname$shrext'
- case "$host_os" in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
- *) libsuff= shlibsuff= ;;
- esac
- ;;
- esac
- ;;
- linux*oldld* | linux*aout* | linux*coff*)
- ;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- library_names_spec='$libname$shrext'
- ;;
- knetbsd*-gnu)
- library_names_spec='$libname$shrext'
- ;;
- netbsd*)
- library_names_spec='$libname$shrext'
- ;;
- newsos6)
- library_names_spec='$libname$shrext'
- ;;
- *nto* | *qnx*)
- library_names_spec='$libname$shrext'
- ;;
- openbsd*)
- library_names_spec='$libname$shrext$versuffix'
- ;;
- os2*)
- libname_spec='$name'
- shrext=.dll
- library_names_spec='$libname.a'
- ;;
- osf3* | osf4* | osf5*)
- library_names_spec='$libname$shrext'
- ;;
- rdos*)
- ;;
- solaris*)
- library_names_spec='$libname$shrext'
- ;;
- sunos4*)
- library_names_spec='$libname$shrext$versuffix'
- ;;
- sysv4 | sysv4.3*)
- library_names_spec='$libname$shrext'
- ;;
- sysv4*MP*)
- library_names_spec='$libname$shrext'
- ;;
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- library_names_spec='$libname$shrext'
- ;;
- tpf*)
- library_names_spec='$libname$shrext'
- ;;
- uts4*)
- library_names_spec='$libname$shrext'
- ;;
-esac
-
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
-shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
-escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
-
-LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
-
-# How to pass a linker flag through the compiler.
-wl="$escaped_wl"
-
-# Static library suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally "so").
-shlibext="$shlibext"
-
-# Format of library name prefix.
-libname_spec="$escaped_libname_spec"
-
-# Library names that the linker finds when passed -lNAME.
-library_names_spec="$escaped_library_names_spec"
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct="$hardcode_direct"
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L="$hardcode_minus_L"
-
-EOF
+++ /dev/null
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
-
-timestamp='2012-02-10'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit ;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
- linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
- knetbsd*-gnu* | netbsd*-gnu* | \
- kopensolaris*-gnu* | \
- storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- android-linux)
- os=-linux-android
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray | -microblaze)
- os=
- basic_machine=$1
- ;;
- -bluegene*)
- os=-cnk
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco6)
- os=-sco5v6
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5v6*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | aarch64 | aarch64_be \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
- | be32 | be64 \
- | bfin \
- | c4x | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | epiphany \
- | fido | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | hexagon \
- | i370 | i860 | i960 | ia64 \
- | ip2k | iq2000 \
- | le32 | le64 \
- | lm32 \
- | m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep | metag \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64octeon | mips64octeonel \
- | mips64orion | mips64orionel \
- | mips64r5900 | mips64r5900el \
- | mips64vr | mips64vrel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mips64vr5900 | mips64vr5900el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64r2 | mipsisa64r2el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | moxie \
- | mt \
- | msp430 \
- | nds32 | nds32le | nds32be \
- | nios | nios2 \
- | ns16k | ns32k \
- | open8 \
- | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle \
- | pyramid \
- | rl78 | rx \
- | score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
- | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
- | spu \
- | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
- | ubicom32 \
- | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
- | we32k \
- | x86 | xc16x | xstormy16 | xtensa \
- | z8k | z80)
- basic_machine=$basic_machine-unknown
- ;;
- c54x)
- basic_machine=tic54x-unknown
- ;;
- c55x)
- basic_machine=tic55x-unknown
- ;;
- c6x)
- basic_machine=tic6x-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
- ms1)
- basic_machine=mt-unknown
- ;;
-
- strongarm | thumb | xscale)
- basic_machine=arm-unknown
- ;;
- xgate)
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- xscaleeb)
- basic_machine=armeb-unknown
- ;;
-
- xscaleel)
- basic_machine=armel-unknown
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | aarch64-* | aarch64_be-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* | avr32-* \
- | be32-* | be64-* \
- | bfin-* | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* \
- | clipper-* | craynv-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | hexagon-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* | iq2000-* \
- | le32-* | le64-* \
- | lm32-* \
- | m32c-* | m32r-* | m32rle-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64octeon-* | mips64octeonel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64r5900-* | mips64r5900el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mips64vr5900-* | mips64vr5900el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64r2-* | mipsisa64r2el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | mmix-* \
- | mt-* \
- | msp430-* \
- | nds32-* | nds32le-* | nds32be-* \
- | nios-* | nios2-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | open8-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
- | pyramid-* \
- | rl78-* | romp-* | rs6000-* | rx-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
- | sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
- | tahoe-* \
- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
- | tile*-* \
- | tron-* \
- | ubicom32-* \
- | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
- | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xc16x-* | xps100-* \
- | xstormy16-* | xtensa*-* \
- | ymp-* \
- | z8k-* | z80-*)
- ;;
- # Recognize the basic CPU types without company name, with glob match.
- xtensa*)
- basic_machine=$basic_machine-unknown
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- abacus)
- basic_machine=abacus-unknown
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amd64)
- basic_machine=x86_64-pc
- ;;
- amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aros)
- basic_machine=i386-pc
- os=-aros
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- blackfin)
- basic_machine=bfin-unknown
- os=-linux
- ;;
- blackfin-*)
- basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- bluegene*)
- basic_machine=powerpc-ibm
- os=-cnk
- ;;
- c54x-*)
- basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- c55x-*)
- basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- c6x-*)
- basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- cegcc)
- basic_machine=arm-unknown
- os=-cegcc
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- craynv)
- basic_machine=craynv-cray
- os=-unicosmp
- ;;
- cr16 | cr16-*)
- basic_machine=cr16-unknown
- os=-elf
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- crisv32 | crisv32-* | etraxfs*)
- basic_machine=crisv32-axis
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- crx)
- basic_machine=crx-unknown
- os=-elf
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- dicos)
- basic_machine=i686-pc
- os=-dicos
- ;;
- djgpp)
- basic_machine=i586-pc
- os=-msdosdjgpp
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m68knommu)
- basic_machine=m68k-unknown
- os=-linux
- ;;
- m68knommu-*)
- basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- microblaze)
- basic_machine=microblaze-xilinx
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- mingw32ce)
- basic_machine=arm-unknown
- os=-mingw32ce
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- ms1-*)
- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
- ;;
- msys)
- basic_machine=i386-pc
- os=-msys
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- nacl)
- basic_machine=le32-unknown
- os=-nacl
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- neo-tandem)
- basic_machine=neo-tandem
- ;;
- nse-tandem)
- basic_machine=nse-tandem
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- openrisc | openrisc-*)
- basic_machine=or32-unknown
- ;;
- os400)
- basic_machine=powerpc-ibm
- os=-os400
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- parisc)
- basic_machine=hppa-unknown
- os=-linux
- ;;
- parisc-*)
- basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
- os=-linux
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pc98)
- basic_machine=i386-pc
- ;;
- pc98-*)
- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2 | pentiumiii | pentium3)
- basic_machine=i686-pc
- ;;
- pentium4)
- basic_machine=i786-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc | ppcbe) basic_machine=powerpc-unknown
- ;;
- ppc-* | ppcbe-*)
- basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rdos)
- basic_machine=i386-pc
- os=-rdos
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sde)
- basic_machine=mipsisa32-sde
- os=-elf
- ;;
- sei)
- basic_machine=mips-sei
- os=-seiux
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sh5el)
- basic_machine=sh5le-unknown
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- strongarm-* | thumb-*)
- basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tile*)
- basic_machine=$basic_machine-unknown
- os=-linux-gnu
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- tpf)
- basic_machine=s390x-ibm
- os=-tpf
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xbox)
- basic_machine=i686-pc
- os=-mingw32
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- xscale-* | xscalee[bl]-*)
- basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- z80-*-coff)
- basic_machine=z80-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- mmix)
- basic_machine=mmix-knuth
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
- basic_machine=sh-unknown
- ;;
- sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -auroraux)
- os=-auroraux
- ;;
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
- | -sym* | -kopensolaris* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* | -cegcc* \
- | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-android* \
- | -linux-newlib* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux-dietlibc)
- os=-linux-dietlibc
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -os400*)
- os=-os400
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -syllable*)
- os=-syllable
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -tpf*)
- os=-tpf
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
- -zvmoe)
- os=-zvmoe
- ;;
- -dicos*)
- os=-dicos
- ;;
- -nacl*)
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- score-*)
- os=-elf
- ;;
- spu-*)
- os=-elf
- ;;
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
- tic54x-*)
- os=-coff
- ;;
- tic55x-*)
- os=-coff
- ;;
- tic6x-*)
- os=-coff
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mep-*)
- os=-elf
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-haiku)
- os=-haiku
- ;;
- *-ibm)
- os=-aix
- ;;
- *-knuth)
- os=-mmixware
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -cnk*|-aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -os400*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -tpf*)
- vendor=ibm
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2012-03-27.16; # UTC
-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
- '')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by 'PROGRAMS ARGS'.
- object Object file output by 'PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputting dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
-# A tabulation character.
-tab=' '
-# A newline character.
-nl='
-'
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-cygpath_u="cygpath -u -f -"
-if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
-## Some versions of gcc put a space before the ':'. On the theory
-## that the space means something, we add a space to the output as
-## well. hp depmode also adds that space, but also prefixes the VPATH
-## to the object. Take care to not repeat it in the output.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like '#:fec' to the end of the
- # dependency line.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
- echo >> "$depfile"
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-xlc)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts '$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$base.u
- tmpdepfile3=$dir.libs/$base.u
- "$@" -Wc,-M
- else
- tmpdepfile1=$dir$base.u
- tmpdepfile2=$dir$base.u
- tmpdepfile3=$dir$base.u
- "$@" -M
- fi
- stat=$?
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add 'dependent.h:' lines.
- sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-msvc7)
- if test "$libtool" = yes; then
- showIncludes=-Wc,-showIncludes
- else
- showIncludes=-showIncludes
- fi
- "$@" $showIncludes > "$tmpdepfile"
- stat=$?
- grep -v '^Note: including file: ' "$tmpdepfile"
- if test "$stat" = 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- # The first sed program below extracts the file names and escapes
- # backslashes for cygpath. The second sed program outputs the file
- # name when reading, but also accumulates all include files in the
- # hold buffer in order to output them again at the end. This only
- # works with sed implementations that can handle large buffers.
- sed < "$tmpdepfile" -n '
-/^Note: including file: *\(.*\)/ {
- s//\1/
- s/\\/\\\\/g
- p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
- s/.*/'"$tab"'/
- G
- p
-}' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvc7msys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove '-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for ':'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
- "$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no eat=no
- for arg
- do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- if test $eat = yes; then
- eat=no
- continue
- fi
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -arch)
- eat=yes ;;
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix=`echo "$object" | sed 's/^.*\././'`
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- # makedepend may prepend the VPATH from the source file name to the object.
- # No need to regex-escape $object, excess matching of '.' is harmless.
- sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove '-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test "X$1" != 'X--mode=compile'; do
- shift
- done
- shift
- fi
-
- IFS=" "
- for arg
- do
- case "$arg" in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E 2>/dev/null |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
- echo "$tab" >> "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvcmsys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+++ /dev/null
-#!/bin/sh
-# In a git/autoconf/automake-enabled project with a NEWS file and a version-
-# controlled .prev-version file, automate the procedure by which we record
-# the date, release-type and version string in the NEWS file. That commit
-# will serve to identify the release, so apply a signed tag to it as well.
-VERSION=2011-05-04.11 # UTC
-
-# Note: this is a bash script (could be zsh or dash)
-
-# Copyright (C) 2009-2012 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# Written by Jim Meyering
-
-ME=`basename "$0"`
-warn() { printf '%s: %s\n' "$ME" "$*" >&2; }
-die() { warn "$*"; exit 1; }
-
-help_version()
-{
- case $1 in
- --help) cat <<EOF
-Usage: $ME [OPTION...] VERSION RELEASE_TYPE
-
-Run this script to perform the final pre-release NEWS update
-in which the date, release-type and version string are recorded.
-Commit that result with a log entry marking the release, and apply
-a signed tag. Run it from your project's top-level directory.
-
-Requirements:
-- you use git for version-control
-- a NEWS file, with line 3 identical to this:
-* Noteworthy changes in release ?.? (????-??-??) [?]
-- a version-controlled .prev-version file
-
-Options:
- --branch BRANCH set release branch (default: master)
- --help print this help, then exit
- --version print version number, then exit
-
-EXAMPLE:
-To update NEWS and tag the beta 8.1 release of coreutils, I would run this:
-
- $ME 8.1 beta
-
-Report bugs and patches to <bug-gnulib@gnu.org>.
-EOF
- exit ;;
-
- --version)
- year=`echo "$VERSION" | sed 's/[^0-9].*//'`
- cat <<EOF
-$ME $VERSION
-Copyright (C) $year Free Software Foundation, Inc,
-License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
-This is free software: you are free to change and redistribute it.
-There is NO WARRANTY, to the extent permitted by law.
-EOF
- exit ;;
-
- *) die "unrecognized option: $1";;
- esac
-}
-
-branch=master
-case $1 in
- --branch) shift; branch=$1; shift ;;
-esac
-
-case $# in
- 1) help_version $1; exit 0;;
- 2) ;;
- *) warn "Usage: $ME [OPTION...] VERSION TYPE"; exit 1;;
-esac
-
-ver=$1
-type=$2
-
-# Verify that $ver looks like a version number, and...
-echo "$ver"|grep -E '^[0-9][0-9.]*[0-9]$' > /dev/null \
- || die "invalid version: $ver"
-prev_ver=$(cat .prev-version) \
- || die 'failed to determine previous version number from .prev-version'
-
-# Verify that $ver is sensible (> .prev-version).
-case $(printf "$prev_ver\n$ver\n"|sort -V -u|tr '\n' ':') in
- "$prev_ver:$ver:") ;;
- *) die "invalid version: $ver";;
-esac
-
-case $type in
- alpha|beta|stable) ;;
- *) die "invalid release type: $type";;
-esac
-
-# Extract package name from Makefile.
-pkg=$(sed -n 's/^PACKAGE = \(.*\)/\1/p' Makefile) \
- || die 'failed to determine package name from Makefile'
-
-# simple check: no question marks on line 3 of NEWS
-noteworthy='* Noteworthy changes in release'
-test "$(sed -n 3p NEWS)" = "$noteworthy ?.? (????-??-??) [?]" \
- || die 'line 3 of NEWS looks fishy!'
-
-# No dirt allowed.
-case $(git diff-index --name-only HEAD) in
- '') ;;
- *) die 'this tree is dirty; commit your changes first';;
-esac
-
-# update NEWS to have today's date, plus desired version number and $type
-perl -MPOSIX -ni -e 'my $today = strftime "%F", localtime time;' \
- -e 'my ($type, $ver) = qw('"$type $ver"');' \
- -e 'my $pfx = "'"$noteworthy"'";' \
- -e 'print $.==3 ? "$pfx $ver ($today) [$type]\n" : $_' \
- NEWS || die 'failed to update NEWS'
-
-# Ensure the current branch name is correct:
-curr_br=$(git rev-parse --symbolic-full-name HEAD)
-test "$curr_br" = refs/heads/$branch || die not on branch $branch
-
-printf "version $ver\n\n* NEWS: Record release date.\n" \
- | git commit -F - -a || die 'git commit failed'
-git tag -s -m "$pkg $ver" v$ver HEAD || die 'git tag failed'
-
-# Local variables:
-# indent-tabs-mode: nil
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "VERSION="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: " # UTC"
-# End:
+++ /dev/null
-#!/bin/sh -e
-# gendocs.sh -- generate a GNU manual in many formats. This script is
-# mentioned in maintain.texi. See the help message below for usage details.
-
-scriptversion=2011-04-08.14
-
-# Copyright 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-# Original author: Mohit Agarwal.
-# Send bug reports and any other correspondence to bug-texinfo@gnu.org.
-#
-# The latest version of this script, and the companion template, is
-# available from Texinfo CVS:
-# http://savannah.gnu.org/cgi-bin/viewcvs/texinfo/texinfo/util/gendocs.sh
-# http://savannah.gnu.org/cgi-bin/viewcvs/texinfo/texinfo/util/gendocs_template
-#
-# An up-to-date copy is also maintained in Gnulib (gnu.org/software/gnulib).
-
-prog=`basename "$0"`
-srcdir=`pwd`
-
-scripturl="http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/texinfo/texinfo/util/gendocs.sh"
-templateurl="http://savannah.gnu.org/cgi-bin/viewcvs/~checkout~/texinfo/texinfo/util/gendocs_template"
-
-: ${SETLANG="env LANG= LC_MESSAGES= LC_ALL= LANGUAGE="}
-: ${MAKEINFO="makeinfo"}
-: ${TEXI2DVI="texi2dvi -t @finalout"}
-: ${DVIPS="dvips"}
-: ${DOCBOOK2HTML="docbook2html"}
-: ${DOCBOOK2PDF="docbook2pdf"}
-: ${DOCBOOK2PS="docbook2ps"}
-: ${DOCBOOK2TXT="docbook2txt"}
-: ${GENDOCS_TEMPLATE_DIR="."}
-: ${TEXI2HTML="texi2html"}
-unset CDPATH
-unset use_texi2html
-
-version="gendocs.sh $scriptversion
-
-Copyright 2010 Free Software Foundation, Inc.
-There is NO warranty. You may redistribute this software
-under the terms of the GNU General Public License.
-For more information about these matters, see the files named COPYING."
-
-usage="Usage: $prog [OPTION]... PACKAGE MANUAL-TITLE
-
-Generate various output formats from PACKAGE.texinfo (or .texi or .txi) source.
-See the GNU Maintainers document for a more extensive discussion:
- http://www.gnu.org/prep/maintain_toc.html
-
-Options:
- -s SRCFILE read Texinfo from SRCFILE, instead of PACKAGE.{texinfo|texi|txi}
- -o OUTDIR write files into OUTDIR, instead of manual/.
- --email ADR use ADR as contact in generated web pages.
- --docbook convert to DocBook too (xml, txt, html, pdf and ps).
- --html ARG pass indicated ARG to makeinfo or texi2html for HTML targets.
- --texi2html use texi2html to generate HTML targets.
- --help display this help and exit successfully.
- --version display version information and exit successfully.
-
-Simple example: $prog --email bug-gnu-emacs@gnu.org emacs \"GNU Emacs Manual\"
-
-Typical sequence:
- cd PACKAGESOURCE/doc
- wget \"$scripturl\"
- wget \"$templateurl\"
- $prog --email BUGLIST MANUAL \"GNU MANUAL - One-line description\"
-
-Output will be in a new subdirectory \"manual\" (by default, use -o OUTDIR
-to override). Move all the new files into your web CVS tree, as
-explained in the Web Pages node of maintain.texi.
-
-Please use the --email ADDRESS option to specify your bug-reporting
-address in the generated HTML pages.
-
-MANUAL-TITLE is included as part of the HTML <title> of the overall
-manual/index.html file. It should include the name of the package being
-documented. manual/index.html is created by substitution from the file
-$GENDOCS_TEMPLATE_DIR/gendocs_template. (Feel free to modify the
-generic template for your own purposes.)
-
-If you have several manuals, you'll need to run this script several
-times with different MANUAL values, specifying a different output
-directory with -o each time. Then write (by hand) an overall index.html
-with links to them all.
-
-If a manual's Texinfo sources are spread across several directories,
-first copy or symlink all Texinfo sources into a single directory.
-(Part of the script's work is to make a tar.gz of the sources.)
-
-You can set the environment variables MAKEINFO, TEXI2DVI, TEXI2HTML, and
-DVIPS to control the programs that get executed, and
-GENDOCS_TEMPLATE_DIR to control where the gendocs_template file is
-looked for. With --docbook, the environment variables DOCBOOK2HTML,
-DOCBOOK2PDF, DOCBOOK2PS, and DOCBOOK2TXT are also respected.
-
-By default, makeinfo and texi2dvi are run in the default (English)
-locale, since that's the language of most Texinfo manuals. If you
-happen to have a non-English manual and non-English web site, see the
-SETLANG setting in the source.
-
-Email bug reports or enhancement requests to bug-texinfo@gnu.org.
-"
-
-calcsize()
-{
- size=`ls -ksl $1 | awk '{print $1}'`
- echo $size
-}
-
-MANUAL_TITLE=
-PACKAGE=
-EMAIL=webmasters@gnu.org # please override with --email
-htmlarg=
-outdir=manual
-srcfile=
-
-while test $# -gt 0; do
- case $1 in
- --email) shift; EMAIL=$1;;
- --help) echo "$usage"; exit 0;;
- --version) echo "$version"; exit 0;;
- -s) shift; srcfile=$1;;
- -o) shift; outdir=$1;;
- --docbook) docbook=yes;;
- --html) shift; htmlarg=$1;;
- --texi2html) use_texi2html=1;;
- -*)
- echo "$0: Unknown option \`$1'." >&2
- echo "$0: Try \`--help' for more information." >&2
- exit 1;;
- *)
- if test -z "$PACKAGE"; then
- PACKAGE=$1
- elif test -z "$MANUAL_TITLE"; then
- MANUAL_TITLE=$1
- else
- echo "$0: extra non-option argument \`$1'." >&2
- exit 1
- fi;;
- esac
- shift
-done
-
-# For most of the following, the base name is just $PACKAGE
-base=$PACKAGE
-
-if test -n "$srcfile"; then
- # but here, we use the basename of $srcfile
- base=`basename "$srcfile"`
- case $base in
- *.txi|*.texi|*.texinfo) base=`echo "$base"|sed 's/\.[texinfo]*$//'`;;
- esac
- PACKAGE=$base
-elif test -s "$srcdir/$PACKAGE.texinfo"; then
- srcfile=$srcdir/$PACKAGE.texinfo
-elif test -s "$srcdir/$PACKAGE.texi"; then
- srcfile=$srcdir/$PACKAGE.texi
-elif test -s "$srcdir/$PACKAGE.txi"; then
- srcfile=$srcdir/$PACKAGE.txi
-else
- echo "$0: cannot find .texinfo or .texi or .txi for $PACKAGE in $srcdir." >&2
- exit 1
-fi
-
-if test ! -r $GENDOCS_TEMPLATE_DIR/gendocs_template; then
- echo "$0: cannot read $GENDOCS_TEMPLATE_DIR/gendocs_template." >&2
- echo "$0: it is available from $templateurl." >&2
- exit 1
-fi
-
-case $outdir in
- /*) abs_outdir=$outdir;;
- *) abs_outdir=$srcdir/$outdir;;
-esac
-
-echo Generating output formats for $srcfile
-
-cmd="$SETLANG $MAKEINFO -o $PACKAGE.info \"$srcfile\""
-echo "Generating info files... ($cmd)"
-eval "$cmd"
-mkdir -p "$outdir/"
-tar czf "$outdir/$PACKAGE.info.tar.gz" $PACKAGE.info*
-info_tgz_size=`calcsize "$outdir/$PACKAGE.info.tar.gz"`
-# do not mv the info files, there's no point in having them available
-# separately on the web.
-
-cmd="$SETLANG ${TEXI2DVI} \"$srcfile\""
-echo "Generating dvi ... ($cmd)"
-eval "$cmd"
-
-# now, before we compress dvi:
-echo Generating postscript...
-${DVIPS} $PACKAGE -o
-gzip -f -9 $PACKAGE.ps
-ps_gz_size=`calcsize $PACKAGE.ps.gz`
-mv $PACKAGE.ps.gz "$outdir/"
-
-# compress/finish dvi:
-gzip -f -9 $PACKAGE.dvi
-dvi_gz_size=`calcsize $PACKAGE.dvi.gz`
-mv $PACKAGE.dvi.gz "$outdir/"
-
-cmd="$SETLANG ${TEXI2DVI} --pdf \"$srcfile\""
-echo "Generating pdf ... ($cmd)"
-eval "$cmd"
-pdf_size=`calcsize $PACKAGE.pdf`
-mv $PACKAGE.pdf "$outdir/"
-
-cmd="$SETLANG $MAKEINFO -o $PACKAGE.txt --no-split --no-headers \"$srcfile\""
-echo "Generating ASCII... ($cmd)"
-eval "$cmd"
-ascii_size=`calcsize $PACKAGE.txt`
-gzip -f -9 -c $PACKAGE.txt >"$outdir/$PACKAGE.txt.gz"
-ascii_gz_size=`calcsize "$outdir/$PACKAGE.txt.gz"`
-mv $PACKAGE.txt "$outdir/"
-
-html_split()
-{
- opt="--split=$1 $htmlarg --node-files"
- cmd="$SETLANG $TEXI2HTML --output $PACKAGE.html $opt \"$srcfile\""
- echo "Generating html by $1... ($cmd)"
- eval "$cmd"
- split_html_dir=$PACKAGE.html
- (
- cd ${split_html_dir} || exit 1
- ln -sf ${PACKAGE}.html index.html
- tar -czf "$abs_outdir/${PACKAGE}.html_$1.tar.gz" -- *.html
- )
- eval html_$1_tgz_size=`calcsize "$outdir/${PACKAGE}.html_$1.tar.gz"`
- rm -f "$outdir"/html_$1/*.html
- mkdir -p "$outdir/html_$1/"
- mv ${split_html_dir}/*.html "$outdir/html_$1/"
- rmdir ${split_html_dir}
-}
-
-if test -z "$use_texi2html"; then
- opt="--no-split --html -o $PACKAGE.html $htmlarg"
- cmd="$SETLANG $MAKEINFO $opt \"$srcfile\""
- echo "Generating monolithic html... ($cmd)"
- rm -rf $PACKAGE.html # in case a directory is left over
- eval "$cmd"
- html_mono_size=`calcsize $PACKAGE.html`
- gzip -f -9 -c $PACKAGE.html >"$outdir/$PACKAGE.html.gz"
- html_mono_gz_size=`calcsize "$outdir/$PACKAGE.html.gz"`
- mv $PACKAGE.html "$outdir/"
-
- cmd="$SETLANG $MAKEINFO --html -o $PACKAGE.html $htmlarg \"$srcfile\""
- echo "Generating html by node... ($cmd)"
- eval "$cmd"
- split_html_dir=$PACKAGE.html
- (
- cd ${split_html_dir} || exit 1
- tar -czf "$abs_outdir/${PACKAGE}.html_node.tar.gz" -- *.html
- )
- html_node_tgz_size=`calcsize "$outdir/${PACKAGE}.html_node.tar.gz"`
- rm -f "$outdir"/html_node/*.html
- mkdir -p "$outdir/html_node/"
- mv ${split_html_dir}/*.html "$outdir/html_node/"
- rmdir ${split_html_dir}
-else
- cmd="$SETLANG $TEXI2HTML --output $PACKAGE.html $htmlarg \"$srcfile\""
- echo "Generating monolithic html... ($cmd)"
- rm -rf $PACKAGE.html # in case a directory is left over
- eval "$cmd"
- html_mono_size=`calcsize $PACKAGE.html`
- gzip -f -9 -c $PACKAGE.html >"$outdir/$PACKAGE.html.gz"
- html_mono_gz_size=`calcsize "$outdir/$PACKAGE.html.gz"`
- mv $PACKAGE.html "$outdir/"
-
- html_split node
- html_split chapter
- html_split section
-fi
-
-echo Making .tar.gz for sources...
-d=`dirname $srcfile`
-(
- cd "$d"
- srcfiles=`ls *.texinfo *.texi *.txi *.eps 2>/dev/null` || true
- tar cvzfh "$abs_outdir/$PACKAGE.texi.tar.gz" $srcfiles
-)
-texi_tgz_size=`calcsize "$outdir/$PACKAGE.texi.tar.gz"`
-
-if test -n "$docbook"; then
- cmd="$SETLANG $MAKEINFO -o - --docbook \"$srcfile\" > ${srcdir}/$PACKAGE-db.xml"
- echo "Generating docbook XML... ($cmd)"
- eval "$cmd"
- docbook_xml_size=`calcsize $PACKAGE-db.xml`
- gzip -f -9 -c $PACKAGE-db.xml >"$outdir/$PACKAGE-db.xml.gz"
- docbook_xml_gz_size=`calcsize "$outdir/$PACKAGE-db.xml.gz"`
- mv $PACKAGE-db.xml "$outdir/"
-
- split_html_db_dir=html_node_db
- cmd="${DOCBOOK2HTML} -o $split_html_db_dir \"${outdir}/$PACKAGE-db.xml\""
- echo "Generating docbook HTML... ($cmd)"
- eval "$cmd"
- (
- cd ${split_html_db_dir} || exit 1
- tar -czf "$abs_outdir/${PACKAGE}.html_node_db.tar.gz" -- *.html
- )
- html_node_db_tgz_size=`calcsize "$outdir/${PACKAGE}.html_node_db.tar.gz"`
- rm -f "$outdir"/html_node_db/*.html
- mkdir -p "$outdir/html_node_db"
- mv ${split_html_db_dir}/*.html "$outdir/html_node_db/"
- rmdir ${split_html_db_dir}
-
- cmd="${DOCBOOK2TXT} \"${outdir}/$PACKAGE-db.xml\""
- echo "Generating docbook ASCII... ($cmd)"
- eval "$cmd"
- docbook_ascii_size=`calcsize $PACKAGE-db.txt`
- mv $PACKAGE-db.txt "$outdir/"
-
- cmd="${DOCBOOK2PS} \"${outdir}/$PACKAGE-db.xml\""
- echo "Generating docbook PS... ($cmd)"
- eval "$cmd"
- gzip -f -9 -c $PACKAGE-db.ps >"$outdir/$PACKAGE-db.ps.gz"
- docbook_ps_gz_size=`calcsize "$outdir/$PACKAGE-db.ps.gz"`
- mv $PACKAGE-db.ps "$outdir/"
-
- cmd="${DOCBOOK2PDF} \"${outdir}/$PACKAGE-db.xml\""
- echo "Generating docbook PDF... ($cmd)"
- eval "$cmd"
- docbook_pdf_size=`calcsize $PACKAGE-db.pdf`
- mv $PACKAGE-db.pdf "$outdir/"
-fi
-
-echo "Writing index file..."
-if test -z "$use_texi2html"; then
- CONDS="/%%IF *HTML_SECTION%%/,/%%ENDIF *HTML_SECTION%%/d;\
- /%%IF *HTML_CHAPTER%%/,/%%ENDIF *HTML_CHAPTER%%/d"
-else
- CONDS="/%%ENDIF.*%%/d;/%%IF *HTML_SECTION%%/d;/%%IF *HTML_CHAPTER%%/d"
-fi
-curdate=`$SETLANG date '+%B %d, %Y'`
-sed \
- -e "s!%%TITLE%%!$MANUAL_TITLE!g" \
- -e "s!%%EMAIL%%!$EMAIL!g" \
- -e "s!%%PACKAGE%%!$PACKAGE!g" \
- -e "s!%%DATE%%!$curdate!g" \
- -e "s!%%HTML_MONO_SIZE%%!$html_mono_size!g" \
- -e "s!%%HTML_MONO_GZ_SIZE%%!$html_mono_gz_size!g" \
- -e "s!%%HTML_NODE_TGZ_SIZE%%!$html_node_tgz_size!g" \
- -e "s!%%HTML_SECTION_TGZ_SIZE%%!$html_section_tgz_size!g" \
- -e "s!%%HTML_CHAPTER_TGZ_SIZE%%!$html_chapter_tgz_size!g" \
- -e "s!%%INFO_TGZ_SIZE%%!$info_tgz_size!g" \
- -e "s!%%DVI_GZ_SIZE%%!$dvi_gz_size!g" \
- -e "s!%%PDF_SIZE%%!$pdf_size!g" \
- -e "s!%%PS_GZ_SIZE%%!$ps_gz_size!g" \
- -e "s!%%ASCII_SIZE%%!$ascii_size!g" \
- -e "s!%%ASCII_GZ_SIZE%%!$ascii_gz_size!g" \
- -e "s!%%TEXI_TGZ_SIZE%%!$texi_tgz_size!g" \
- -e "s!%%DOCBOOK_HTML_NODE_TGZ_SIZE%%!$html_node_db_tgz_size!g" \
- -e "s!%%DOCBOOK_ASCII_SIZE%%!$docbook_ascii_size!g" \
- -e "s!%%DOCBOOK_PS_GZ_SIZE%%!$docbook_ps_gz_size!g" \
- -e "s!%%DOCBOOK_PDF_SIZE%%!$docbook_pdf_size!g" \
- -e "s!%%DOCBOOK_XML_SIZE%%!$docbook_xml_size!g" \
- -e "s!%%DOCBOOK_XML_GZ_SIZE%%!$docbook_xml_gz_size!g" \
- -e "s,%%SCRIPTURL%%,$scripturl,g" \
- -e "s!%%SCRIPTNAME%%!$prog!g" \
- -e "$CONDS" \
-$GENDOCS_TEMPLATE_DIR/gendocs_template >"$outdir/index.html"
-
-echo "Done, see $outdir/ subdirectory for new files."
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-#!/bin/sh
-# Sign files and upload them.
-
-scriptversion=2012-01-15.15; # UTC
-
-# Copyright (C) 2004-2012 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# Originally written by Alexandre Duret-Lutz <adl@gnu.org>.
-# The master copy of this file is maintained in the gnulib Git repository.
-# Please send bug reports and feature requests to bug-gnulib@gnu.org.
-
-set -e
-
-GPG='gpg --batch --no-tty'
-conffile=.gnuploadrc
-to=
-dry_run=false
-symlink_files=
-delete_files=
-delete_symlinks=
-collect_var=
-dbg=
-nl='
-'
-
-usage="Usage: $0 [OPTION]... [CMD] FILE... [[CMD] FILE...]
-
-Sign all FILES, and process them at selected destinations according to CMD.
-<http://www.gnu.org/prep/maintain/html_node/Automated-FTP-Uploads.html>
-explains further.
-
-Commands:
- --delete delete FILES from destination
- --symlink create symbolic links
- --rmsymlink remove symbolic links
- -- treat the remaining arguments as files to upload
-
-Options:
- --help print this help text and exit
- --to DEST specify one destination for FILES
- (multiple --to options are allowed)
- --user NAME sign with key NAME
- --symlink-regex[=EXPR] use sed script EXPR to compute symbolic link names
- --dry-run do nothing, show what would have been done
- --version output version information and exit
-
-If --symlink-regex is given without EXPR, then the link target name
-is created by replacing the version information with '-latest', e.g.:
-
- foo-1.3.4.tar.gz -> foo-latest.tar.gz
-
-Recognized destinations are:
- alpha.gnu.org:DIRECTORY
- savannah.gnu.org:DIRECTORY
- savannah.nongnu.org:DIRECTORY
- ftp.gnu.org:DIRECTORY
- build directive files and upload files by FTP
- download.gnu.org.ua:{alpha|ftp}/DIRECTORY
- build directive files and upload files by SFTP
- [user@]host:DIRECTORY upload files with scp
-
-Options and commands are applied in order. If the file $conffile exists
-in the current working directory, its contents are prepended to the
-actual command line options. Use this to keep your defaults. Comments
-(#) and empty lines in $conffile are allowed.
-
-Examples:
-1. Upload foobar-1.0.tar.gz to ftp.gnu.org:
- gnupload --to ftp.gnu.org:foobar foobar-1.0.tar.gz
-
-2. Upload foobar-1.0.tar.gz and foobar-1.0.tar.xz to ftp.gnu.org:
- gnupload --to ftp.gnu.org:foobar foobar-1.0.tar.gz foobar-1.0.tar.xz
-
-3. Same as above, and also create symbolic links to foobar-latest.tar.*:
- gnupload --to ftp.gnu.org:foobar \\
- --symlink-regex \\
- foobar-1.0.tar.gz foobar-1.0.tar.xz
-
-4. Upload foobar-0.9.90.tar.gz to two sites:
- gnupload --to alpha.gnu.org:foobar \\
- --to sources.redhat.com:~ftp/pub/foobar \\
- foobar-0.9.90.tar.gz
-
-5. Delete oopsbar-0.9.91.tar.gz and upload foobar-0.9.91.tar.gz
- (the -- terminates the list of files to delete):
- gnupload --to alpha.gnu.org:foobar \\
- --to sources.redhat.com:~ftp/pub/foobar \\
- --delete oopsbar-0.9.91.tar.gz \\
- -- foobar-0.9.91.tar.gz
-
-gnupload uses the ncftpput program to do the transfers; if you don't
-happen to have an ncftp package installed, the ncftpput-ftp script in
-the build-aux/ directory of the gnulib package
-(http://savannah.gnu.org/projects/gnulib) may serve as a replacement.
-
-Send patches and bug reports to <bug-gnulib@gnu.org>."
-
-# Read local configuration file
-if test -r "$conffile"; then
- echo "$0: Reading configuration file $conffile"
- conf=`sed 's/#.*$//;/^$/d' "$conffile" | tr "\015$nl" ' '`
- eval set x "$conf \"\$@\""
- shift
-fi
-
-while test -n "$1"; do
- case $1 in
- -*)
- collect_var=
- case $1 in
- --help)
- echo "$usage"
- exit $?
- ;;
- --to)
- if test -z "$2"; then
- echo "$0: Missing argument for --to" 1>&2
- exit 1
- else
- to="$to $2"
- shift
- fi
- ;;
- --user)
- if test -z "$2"; then
- echo "$0: Missing argument for --user" 1>&2
- exit 1
- else
- GPG="$GPG --local-user $2"
- shift
- fi
- ;;
- --delete)
- collect_var=delete_files
- ;;
- --rmsymlink)
- collect_var=delete_symlinks
- ;;
- --symlink-regex=*)
- symlink_expr=`expr "$1" : '[^=]*=\(.*\)'`
- ;;
- --symlink-regex)
- symlink_expr='s|-[0-9][0-9\.]*\(-[0-9][0-9]*\)\{0,1\}\.|-latest.|'
- ;;
- --symlink)
- collect_var=symlink_files
- ;;
- --dry-run|-n)
- dry_run=:
- ;;
- --version)
- echo "gnupload $scriptversion"
- exit $?
- ;;
- --)
- shift
- break
- ;;
- -*)
- echo "$0: Unknown option '$1', try '$0 --help'" 1>&2
- exit 1
- ;;
- esac
- ;;
- *)
- if test -z "$collect_var"; then
- break
- else
- eval "$collect_var=\"\$$collect_var $1\""
- fi
- ;;
- esac
- shift
-done
-
-dprint()
-{
- echo "Running $* ..."
-}
-
-if $dry_run; then
- dbg=dprint
-fi
-
-if test -z "$to"; then
- echo "$0: Missing destination sites" >&2
- exit 1
-fi
-
-if test -n "$symlink_files"; then
- x=`echo "$symlink_files" | sed 's/[^ ]//g;s/ //g'`
- if test -n "$x"; then
- echo "$0: Odd number of symlink arguments" >&2
- exit 1
- fi
-fi
-
-if test $# = 0; then
- if test -z "${symlink_files}${delete_files}${delete_symlinks}"; then
- echo "$0: No file to upload" 1>&2
- exit 1
- fi
-else
- # Make sure all files exist. We don't want to ask
- # for the passphrase if the script will fail.
- for file
- do
- if test ! -f $file; then
- echo "$0: Cannot find '$file'" 1>&2
- exit 1
- elif test -n "$symlink_expr"; then
- linkname=`echo $file | sed "$symlink_expr"`
- if test -z "$linkname"; then
- echo "$0: symlink expression produces empty results" >&2
- exit 1
- elif test "$linkname" = $file; then
- echo "$0: symlink expression does not alter file name" >&2
- exit 1
- fi
- fi
- done
-fi
-
-# Make sure passphrase is not exported in the environment.
-unset passphrase
-
-# Reset PATH to be sure that echo is a built-in. We will later use
-# 'echo $passphrase' to output the passphrase, so it is important that
-# it is a built-in (third-party programs tend to appear in 'ps'
-# listings with their arguments...).
-# Remember this script runs with 'set -e', so if echo is not built-in
-# it will exit now.
-PATH=/empty echo -n "Enter GPG passphrase: "
-stty -echo
-read -r passphrase
-stty echo
-echo
-
-if test $# -ne 0; then
- for file
- do
- echo "Signing $file ..."
- rm -f $file.sig
- echo "$passphrase" | $dbg $GPG --passphrase-fd 0 -ba -o $file.sig $file
- done
-fi
-
-
-# mkdirective DESTDIR BASE FILE STMT
-# Arguments: See upload, below
-mkdirective ()
-{
- stmt="$4"
- if test -n "$3"; then
- stmt="
-filename: $3$stmt"
- fi
-
- cat >${2}.directive<<EOF
-version: 1.1
-directory: $1
-comment: gnupload v. $scriptversion$stmt
-EOF
- if $dry_run; then
- echo "File ${2}.directive:"
- cat ${2}.directive
- echo "File ${2}.directive:" | sed 's/./-/g'
- fi
-}
-
-mksymlink ()
-{
- while test $# -ne 0
- do
- echo "symlink: $1 $2"
- shift
- shift
- done
-}
-
-# upload DEST DESTDIR BASE FILE STMT FILES
-# Arguments:
-# DEST Destination site;
-# DESTDIR Destination directory;
-# BASE Base name for the directive file;
-# FILE Name of the file to distribute (may be empty);
-# STMT Additional statements for the directive file;
-# FILES List of files to upload.
-upload ()
-{
- dest=$1
- destdir=$2
- base=$3
- file=$4
- stmt=$5
- files=$6
-
- rm -f $base.directive $base.directive.asc
- case $dest in
- alpha.gnu.org:*)
- mkdirective "$destdir" "$base" "$file" "$stmt"
- echo "$passphrase" | $dbg $GPG --passphrase-fd 0 --clearsign $base.directive
- $dbg ncftpput ftp-upload.gnu.org /incoming/alpha $files $base.directive.asc
- ;;
- ftp.gnu.org:*)
- mkdirective "$destdir" "$base" "$file" "$stmt"
- echo "$passphrase" | $dbg $GPG --passphrase-fd 0 --clearsign $base.directive
- $dbg ncftpput ftp-upload.gnu.org /incoming/ftp $files $base.directive.asc
- ;;
- savannah.gnu.org:*)
- if test -z "$files"; then
- echo "$0: warning: standalone directives not applicable for $dest" >&2
- fi
- $dbg ncftpput savannah.gnu.org /incoming/savannah/$destdir $files
- ;;
- savannah.nongnu.org:*)
- if test -z "$files"; then
- echo "$0: warning: standalone directives not applicable for $dest" >&2
- fi
- $dbg ncftpput savannah.nongnu.org /incoming/savannah/$destdir $files
- ;;
- download.gnu.org.ua:alpha/*|download.gnu.org.ua:ftp/*)
- destdir_p1=`echo "$destdir" | sed 's,^[^/]*/,,'`
- destdir_topdir=`echo "$destdir" | sed 's,/.*,,'`
- mkdirective "$destdir_p1" "$base" "$file" "$stmt"
- echo "$passphrase" | $dbg $GPG --passphrase-fd 0 --clearsign $base.directive
- for f in $files $base.directive.asc
- do
- echo put $f
- done | $dbg sftp -b - puszcza.gnu.org.ua:/incoming/$destdir_topdir
- ;;
- /*)
- dest_host=`echo "$dest" | sed 's,:.*,,'`
- mkdirective "$destdir" "$base" "$file" "$stmt"
- echo "$passphrase" | $dbg $GPG --passphrase-fd 0 --clearsign $base.directive
- $dbg cp $files $base.directive.asc $dest_host
- ;;
- *)
- if test -z "$files"; then
- echo "$0: warning: standalone directives not applicable for $dest" >&2
- fi
- $dbg scp $files $dest
- ;;
- esac
- rm -f $base.directive $base.directive.asc
-}
-
-#####
-# Process any standalone directives
-stmt=
-if test -n "$symlink_files"; then
- stmt="$stmt
-`mksymlink $symlink_files`"
-fi
-
-for file in $delete_files
-do
- stmt="$stmt
-archive: $file"
-done
-
-for file in $delete_symlinks
-do
- stmt="$stmt
-rmsymlink: $file"
-done
-
-if test -n "$stmt"; then
- for dest in $to
- do
- destdir=`echo $dest | sed 's/[^:]*://'`
- upload "$dest" "$destdir" "`hostname`-$$" "" "$stmt"
- done
-fi
-
-# Process actual uploads
-for dest in $to
-do
- for file
- do
- echo "Uploading $file to $dest ..."
- stmt=
- files="$file $file.sig"
- destdir=`echo $dest | sed 's/[^:]*://'`
- if test -n "$symlink_expr"; then
- linkname=`echo $file | sed "$symlink_expr"`
- stmt="$stmt
-symlink: $file $linkname
-symlink: $file.sig $linkname.sig"
- fi
- upload "$dest" "$destdir" "$file" "$file" "$stmt" "$files"
- done
-done
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+++ /dev/null
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2011-11-20.07; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
- --help display this help and exit.
- --version display version info and exit.
-
- -c (ignored)
- -C install only if different (preserve the last data modification time)
- -d create directories instead of installing files.
- -g GROUP $chgrpprog installed files to GROUP.
- -m MODE $chmodprog installed files to MODE.
- -o USER $chownprog installed files to USER.
- -s $stripprog installed files.
- -t DIRECTORY install into DIRECTORY.
- -T report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
- RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
- case $1 in
- -c) ;;
-
- -C) copy_on_change=true;;
-
- -d) dir_arg=true;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift;;
-
- --help) echo "$usage"; exit $?;;
-
- -m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
-
- -o) chowncmd="$chownprog $2"
- shift;;
-
- -s) stripcmd=$stripprog;;
-
- -t) dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
-
- -T) no_target_directory=true;;
-
- --version) echo "$0 $scriptversion"; exit $?;;
-
- --) shift
- break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
- esac
- shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dst_arg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dst_arg"
- shift # fnord
- fi
- shift # arg
- dst_arg=$arg
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- done
-fi
-
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call 'install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-if test -z "$dir_arg"; then
- do_exit='(exit $ret); exit $ret'
- trap "ret=129; $do_exit" 1
- trap "ret=130; $do_exit" 2
- trap "ret=141; $do_exit" 13
- trap "ret=143; $do_exit" 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
-for src
-do
- # Protect names problematic for 'test' and other utilities.
- case $src in
- -* | [=\(\)!]) src=./$src;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dst_arg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
- dst=$dst_arg
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
-
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
- esac
-
- eval "$initialize_posix_glob"
-
- oIFS=$IFS
- IFS=/
- $posix_glob set -f
- set fnord $dstdir
- shift
- $posix_glob set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test X"$d" = X && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
- { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
- { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # If -C, don't bother to copy if it wouldn't change the file.
- if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
- set X $old && old=:$2:$4:$5:$6 &&
- set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
- test "$old" = "$new" &&
- $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
- then
- rm -f "$dsttmp"
- else
- # Rename the file to the real destination.
- $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
- {
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- fi || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+++ /dev/null
-#!/bin/sh
-# Get modification time of a file or directory and pretty-print it.
-
-scriptversion=2010-08-21.06; # UTC
-
-# Copyright (C) 1995-2012 Free Software Foundation, Inc.
-# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-fi
-
-case $1 in
- '')
- echo "$0: No file. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: mdate-sh [--help] [--version] FILE
-
-Pretty-print the modification day of FILE, in the format:
-1 January 1970
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "mdate-sh $scriptversion"
- exit $?
- ;;
-esac
-
-error ()
-{
- echo "$0: $1" >&2
- exit 1
-}
-
-
-# Prevent date giving response in another language.
-LANG=C
-export LANG
-LC_ALL=C
-export LC_ALL
-LC_TIME=C
-export LC_TIME
-
-# GNU ls changes its time format in response to the TIME_STYLE
-# variable. Since we cannot assume 'unset' works, revert this
-# variable to its documented default.
-if test "${TIME_STYLE+set}" = set; then
- TIME_STYLE=posix-long-iso
- export TIME_STYLE
-fi
-
-save_arg1=$1
-
-# Find out how to get the extended ls output of a file or directory.
-if ls -L /dev/null 1>/dev/null 2>&1; then
- ls_command='ls -L -l -d'
-else
- ls_command='ls -l -d'
-fi
-# Avoid user/group names that might have spaces, when possible.
-if ls -n /dev/null 1>/dev/null 2>&1; then
- ls_command="$ls_command -n"
-fi
-
-# A 'ls -l' line looks as follows on OS/2.
-# drwxrwx--- 0 Aug 11 2001 foo
-# This differs from Unix, which adds ownership information.
-# drwxrwx--- 2 root root 4096 Aug 11 2001 foo
-#
-# To find the date, we split the line on spaces and iterate on words
-# until we find a month. This cannot work with files whose owner is a
-# user named "Jan", or "Feb", etc. However, it's unlikely that '/'
-# will be owned by a user whose name is a month. So we first look at
-# the extended ls output of the root directory to decide how many
-# words should be skipped to get the date.
-
-# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
-set x`$ls_command /`
-
-# Find which argument is the month.
-month=
-command=
-until test $month
-do
- test $# -gt 0 || error "failed parsing '$ls_command /' output"
- shift
- # Add another shift to the command.
- command="$command shift;"
- case $1 in
- Jan) month=January; nummonth=1;;
- Feb) month=February; nummonth=2;;
- Mar) month=March; nummonth=3;;
- Apr) month=April; nummonth=4;;
- May) month=May; nummonth=5;;
- Jun) month=June; nummonth=6;;
- Jul) month=July; nummonth=7;;
- Aug) month=August; nummonth=8;;
- Sep) month=September; nummonth=9;;
- Oct) month=October; nummonth=10;;
- Nov) month=November; nummonth=11;;
- Dec) month=December; nummonth=12;;
- esac
-done
-
-test -n "$month" || error "failed parsing '$ls_command /' output"
-
-# Get the extended ls output of the file or directory.
-set dummy x`eval "$ls_command \"\\\$save_arg1\""`
-
-# Remove all preceding arguments
-eval $command
-
-# Because of the dummy argument above, month is in $2.
-#
-# On a POSIX system, we should have
-#
-# $# = 5
-# $1 = file size
-# $2 = month
-# $3 = day
-# $4 = year or time
-# $5 = filename
-#
-# On Darwin 7.7.0 and 7.6.0, we have
-#
-# $# = 4
-# $1 = day
-# $2 = month
-# $3 = year or time
-# $4 = filename
-
-# Get the month.
-case $2 in
- Jan) month=January; nummonth=1;;
- Feb) month=February; nummonth=2;;
- Mar) month=March; nummonth=3;;
- Apr) month=April; nummonth=4;;
- May) month=May; nummonth=5;;
- Jun) month=June; nummonth=6;;
- Jul) month=July; nummonth=7;;
- Aug) month=August; nummonth=8;;
- Sep) month=September; nummonth=9;;
- Oct) month=October; nummonth=10;;
- Nov) month=November; nummonth=11;;
- Dec) month=December; nummonth=12;;
-esac
-
-case $3 in
- ???*) day=$1;;
- *) day=$3; shift;;
-esac
-
-# Here we have to deal with the problem that the ls output gives either
-# the time of day or the year.
-case $3 in
- *:*) set `date`; eval year=\$$#
- case $2 in
- Jan) nummonthtod=1;;
- Feb) nummonthtod=2;;
- Mar) nummonthtod=3;;
- Apr) nummonthtod=4;;
- May) nummonthtod=5;;
- Jun) nummonthtod=6;;
- Jul) nummonthtod=7;;
- Aug) nummonthtod=8;;
- Sep) nummonthtod=9;;
- Oct) nummonthtod=10;;
- Nov) nummonthtod=11;;
- Dec) nummonthtod=12;;
- esac
- # For the first six month of the year the time notation can also
- # be used for files modified in the last year.
- if (expr $nummonth \> $nummonthtod) > /dev/null;
- then
- year=`expr $year - 1`
- fi;;
- *) year=$3;;
-esac
-
-# The result.
-echo $day $month $year
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+++ /dev/null
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2012-01-06.18; # UTC
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try '$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, 'missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file 'aclocal.m4'
- autoconf touch file 'configure'
- autoheader touch file 'config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all 'Makefile.in' files
- bison create 'y.tab.[ch]', if possible, from existing .[ch]
- flex create 'lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create 'lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- yacc create 'y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
-
-Send bug reports to <bug-automake@gnu.org>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown '$1' option"
- echo 1>&2 "Try '$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running '$TOOL --version' or '$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'acinclude.m4' or '${configure_ac}'. You might want
- to install the Automake and Perl packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified '${configure_ac}'. You might want to install the
- Autoconf and GNU m4 packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'acconfig.h' or '${configure_ac}'. You might want
- to install the Autoconf and GNU m4 packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
- You might want to install the Automake and Perl packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: '$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get '$1' as part of Autoconf from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: '$1' $msg. You should only need it if
- you modified a '.y' file. You may need the Bison package
- in order for those modifications to take effect. You can get
- Bison from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a '.l' file. You may need the Flex package
- in order for those modifications to take effect. You can get
- Flex from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- Help2man package in order for those modifications to take
- effect. You can get Help2man from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a '.texi' or '.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy 'make' (AIX,
- DU, IRIX). You might want to install the Texinfo package or
- the GNU make package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: '$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the 'README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing '$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+++ /dev/null
-#ifndef _Noreturn
-# if (3 <= __GNUC__ || (__GNUC__ == 2 && 8 <= __GNUC_MINOR__) \
- || 0x5110 <= __SUNPRO_C)
-# define _Noreturn __attribute__ ((__noreturn__))
-# elif 1200 <= _MSC_VER
-# define _Noreturn __declspec (noreturn)
-# else
-# define _Noreturn
-# endif
-#endif
+++ /dev/null
-/* A C macro for declaring that specific arguments must not be NULL.
- Copyright (C) 2009-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published
- by the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* _GL_ARG_NONNULL((n,...,m)) tells the compiler and static analyzer tools
- that the values passed as arguments n, ..., m must be non-NULL pointers.
- n = 1 stands for the first argument, n = 2 for the second argument etc. */
-#ifndef _GL_ARG_NONNULL
-# if (__GNUC__ == 3 && __GNUC_MINOR__ >= 3) || __GNUC__ > 3
-# define _GL_ARG_NONNULL(params) __attribute__ ((__nonnull__ params))
-# else
-# define _GL_ARG_NONNULL(params)
-# endif
-#endif
+++ /dev/null
-/* C++ compatible function declaration macros.
- Copyright (C) 2010-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published
- by the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _GL_CXXDEFS_H
-#define _GL_CXXDEFS_H
-
-/* The three most frequent use cases of these macros are:
-
- * For providing a substitute for a function that is missing on some
- platforms, but is declared and works fine on the platforms on which
- it exists:
-
- #if @GNULIB_FOO@
- # if !@HAVE_FOO@
- _GL_FUNCDECL_SYS (foo, ...);
- # endif
- _GL_CXXALIAS_SYS (foo, ...);
- _GL_CXXALIASWARN (foo);
- #elif defined GNULIB_POSIXCHECK
- ...
- #endif
-
- * For providing a replacement for a function that exists on all platforms,
- but is broken/insufficient and needs to be replaced on some platforms:
-
- #if @GNULIB_FOO@
- # if @REPLACE_FOO@
- # if !(defined __cplusplus && defined GNULIB_NAMESPACE)
- # undef foo
- # define foo rpl_foo
- # endif
- _GL_FUNCDECL_RPL (foo, ...);
- _GL_CXXALIAS_RPL (foo, ...);
- # else
- _GL_CXXALIAS_SYS (foo, ...);
- # endif
- _GL_CXXALIASWARN (foo);
- #elif defined GNULIB_POSIXCHECK
- ...
- #endif
-
- * For providing a replacement for a function that exists on some platforms
- but is broken/insufficient and needs to be replaced on some of them and
- is additionally either missing or undeclared on some other platforms:
-
- #if @GNULIB_FOO@
- # if @REPLACE_FOO@
- # if !(defined __cplusplus && defined GNULIB_NAMESPACE)
- # undef foo
- # define foo rpl_foo
- # endif
- _GL_FUNCDECL_RPL (foo, ...);
- _GL_CXXALIAS_RPL (foo, ...);
- # else
- # if !@HAVE_FOO@ or if !@HAVE_DECL_FOO@
- _GL_FUNCDECL_SYS (foo, ...);
- # endif
- _GL_CXXALIAS_SYS (foo, ...);
- # endif
- _GL_CXXALIASWARN (foo);
- #elif defined GNULIB_POSIXCHECK
- ...
- #endif
-*/
-
-/* _GL_EXTERN_C declaration;
- performs the declaration with C linkage. */
-#if defined __cplusplus
-# define _GL_EXTERN_C extern "C"
-#else
-# define _GL_EXTERN_C extern
-#endif
-
-/* _GL_FUNCDECL_RPL (func, rettype, parameters_and_attributes);
- declares a replacement function, named rpl_func, with the given prototype,
- consisting of return type, parameters, and attributes.
- Example:
- _GL_FUNCDECL_RPL (open, int, (const char *filename, int flags, ...)
- _GL_ARG_NONNULL ((1)));
- */
-#define _GL_FUNCDECL_RPL(func,rettype,parameters_and_attributes) \
- _GL_FUNCDECL_RPL_1 (rpl_##func, rettype, parameters_and_attributes)
-#define _GL_FUNCDECL_RPL_1(rpl_func,rettype,parameters_and_attributes) \
- _GL_EXTERN_C rettype rpl_func parameters_and_attributes
-
-/* _GL_FUNCDECL_SYS (func, rettype, parameters_and_attributes);
- declares the system function, named func, with the given prototype,
- consisting of return type, parameters, and attributes.
- Example:
- _GL_FUNCDECL_SYS (open, int, (const char *filename, int flags, ...)
- _GL_ARG_NONNULL ((1)));
- */
-#define _GL_FUNCDECL_SYS(func,rettype,parameters_and_attributes) \
- _GL_EXTERN_C rettype func parameters_and_attributes
-
-/* _GL_CXXALIAS_RPL (func, rettype, parameters);
- declares a C++ alias called GNULIB_NAMESPACE::func
- that redirects to rpl_func, if GNULIB_NAMESPACE is defined.
- Example:
- _GL_CXXALIAS_RPL (open, int, (const char *filename, int flags, ...));
- */
-#define _GL_CXXALIAS_RPL(func,rettype,parameters) \
- _GL_CXXALIAS_RPL_1 (func, rpl_##func, rettype, parameters)
-#if defined __cplusplus && defined GNULIB_NAMESPACE
-# define _GL_CXXALIAS_RPL_1(func,rpl_func,rettype,parameters) \
- namespace GNULIB_NAMESPACE \
- { \
- rettype (*const func) parameters = ::rpl_func; \
- } \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#else
-# define _GL_CXXALIAS_RPL_1(func,rpl_func,rettype,parameters) \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#endif
-
-/* _GL_CXXALIAS_RPL_CAST_1 (func, rpl_func, rettype, parameters);
- is like _GL_CXXALIAS_RPL_1 (func, rpl_func, rettype, parameters);
- except that the C function rpl_func may have a slightly different
- declaration. A cast is used to silence the "invalid conversion" error
- that would otherwise occur. */
-#if defined __cplusplus && defined GNULIB_NAMESPACE
-# define _GL_CXXALIAS_RPL_CAST_1(func,rpl_func,rettype,parameters) \
- namespace GNULIB_NAMESPACE \
- { \
- rettype (*const func) parameters = \
- reinterpret_cast<rettype(*)parameters>(::rpl_func); \
- } \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#else
-# define _GL_CXXALIAS_RPL_CAST_1(func,rpl_func,rettype,parameters) \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#endif
-
-/* _GL_CXXALIAS_SYS (func, rettype, parameters);
- declares a C++ alias called GNULIB_NAMESPACE::func
- that redirects to the system provided function func, if GNULIB_NAMESPACE
- is defined.
- Example:
- _GL_CXXALIAS_SYS (open, int, (const char *filename, int flags, ...));
- */
-#if defined __cplusplus && defined GNULIB_NAMESPACE
- /* If we were to write
- rettype (*const func) parameters = ::func;
- like above in _GL_CXXALIAS_RPL_1, the compiler could optimize calls
- better (remove an indirection through a 'static' pointer variable),
- but then the _GL_CXXALIASWARN macro below would cause a warning not only
- for uses of ::func but also for uses of GNULIB_NAMESPACE::func. */
-# define _GL_CXXALIAS_SYS(func,rettype,parameters) \
- namespace GNULIB_NAMESPACE \
- { \
- static rettype (*func) parameters = ::func; \
- } \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#else
-# define _GL_CXXALIAS_SYS(func,rettype,parameters) \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#endif
-
-/* _GL_CXXALIAS_SYS_CAST (func, rettype, parameters);
- is like _GL_CXXALIAS_SYS (func, rettype, parameters);
- except that the C function func may have a slightly different declaration.
- A cast is used to silence the "invalid conversion" error that would
- otherwise occur. */
-#if defined __cplusplus && defined GNULIB_NAMESPACE
-# define _GL_CXXALIAS_SYS_CAST(func,rettype,parameters) \
- namespace GNULIB_NAMESPACE \
- { \
- static rettype (*func) parameters = \
- reinterpret_cast<rettype(*)parameters>(::func); \
- } \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#else
-# define _GL_CXXALIAS_SYS_CAST(func,rettype,parameters) \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#endif
-
-/* _GL_CXXALIAS_SYS_CAST2 (func, rettype, parameters, rettype2, parameters2);
- is like _GL_CXXALIAS_SYS (func, rettype, parameters);
- except that the C function is picked among a set of overloaded functions,
- namely the one with rettype2 and parameters2. Two consecutive casts
- are used to silence the "cannot find a match" and "invalid conversion"
- errors that would otherwise occur. */
-#if defined __cplusplus && defined GNULIB_NAMESPACE
- /* The outer cast must be a reinterpret_cast.
- The inner cast: When the function is defined as a set of overloaded
- functions, it works as a static_cast<>, choosing the designated variant.
- When the function is defined as a single variant, it works as a
- reinterpret_cast<>. The parenthesized cast syntax works both ways. */
-# define _GL_CXXALIAS_SYS_CAST2(func,rettype,parameters,rettype2,parameters2) \
- namespace GNULIB_NAMESPACE \
- { \
- static rettype (*func) parameters = \
- reinterpret_cast<rettype(*)parameters>( \
- (rettype2(*)parameters2)(::func)); \
- } \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#else
-# define _GL_CXXALIAS_SYS_CAST2(func,rettype,parameters,rettype2,parameters2) \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#endif
-
-/* _GL_CXXALIASWARN (func);
- causes a warning to be emitted when ::func is used but not when
- GNULIB_NAMESPACE::func is used. func must be defined without overloaded
- variants. */
-#if defined __cplusplus && defined GNULIB_NAMESPACE
-# define _GL_CXXALIASWARN(func) \
- _GL_CXXALIASWARN_1 (func, GNULIB_NAMESPACE)
-# define _GL_CXXALIASWARN_1(func,namespace) \
- _GL_CXXALIASWARN_2 (func, namespace)
-/* To work around GCC bug <http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43881>,
- we enable the warning only when not optimizing. */
-# if !__OPTIMIZE__
-# define _GL_CXXALIASWARN_2(func,namespace) \
- _GL_WARN_ON_USE (func, \
- "The symbol ::" #func " refers to the system function. " \
- "Use " #namespace "::" #func " instead.")
-# elif __GNUC__ >= 3 && GNULIB_STRICT_CHECKING
-# define _GL_CXXALIASWARN_2(func,namespace) \
- extern __typeof__ (func) func
-# else
-# define _GL_CXXALIASWARN_2(func,namespace) \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-# endif
-#else
-# define _GL_CXXALIASWARN(func) \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#endif
-
-/* _GL_CXXALIASWARN1 (func, rettype, parameters_and_attributes);
- causes a warning to be emitted when the given overloaded variant of ::func
- is used but not when GNULIB_NAMESPACE::func is used. */
-#if defined __cplusplus && defined GNULIB_NAMESPACE
-# define _GL_CXXALIASWARN1(func,rettype,parameters_and_attributes) \
- _GL_CXXALIASWARN1_1 (func, rettype, parameters_and_attributes, \
- GNULIB_NAMESPACE)
-# define _GL_CXXALIASWARN1_1(func,rettype,parameters_and_attributes,namespace) \
- _GL_CXXALIASWARN1_2 (func, rettype, parameters_and_attributes, namespace)
-/* To work around GCC bug <http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43881>,
- we enable the warning only when not optimizing. */
-# if !__OPTIMIZE__
-# define _GL_CXXALIASWARN1_2(func,rettype,parameters_and_attributes,namespace) \
- _GL_WARN_ON_USE_CXX (func, rettype, parameters_and_attributes, \
- "The symbol ::" #func " refers to the system function. " \
- "Use " #namespace "::" #func " instead.")
-# elif __GNUC__ >= 3 && GNULIB_STRICT_CHECKING
-# define _GL_CXXALIASWARN1_2(func,rettype,parameters_and_attributes,namespace) \
- extern __typeof__ (func) func
-# else
-# define _GL_CXXALIASWARN1_2(func,rettype,parameters_and_attributes,namespace) \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-# endif
-#else
-# define _GL_CXXALIASWARN1(func,rettype,parameters_and_attributes) \
- _GL_EXTERN_C int _gl_cxxalias_dummy
-#endif
-
-#endif /* _GL_CXXDEFS_H */
+++ /dev/null
-/* A C macro for emitting warnings if a function is used.
- Copyright (C) 2010-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published
- by the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* _GL_WARN_ON_USE (function, "literal string") issues a declaration
- for FUNCTION which will then trigger a compiler warning containing
- the text of "literal string" anywhere that function is called, if
- supported by the compiler. If the compiler does not support this
- feature, the macro expands to an unused extern declaration.
-
- This macro is useful for marking a function as a potential
- portability trap, with the intent that "literal string" include
- instructions on the replacement function that should be used
- instead. However, one of the reasons that a function is a
- portability trap is if it has the wrong signature. Declaring
- FUNCTION with a different signature in C is a compilation error, so
- this macro must use the same type as any existing declaration so
- that programs that avoid the problematic FUNCTION do not fail to
- compile merely because they included a header that poisoned the
- function. But this implies that _GL_WARN_ON_USE is only safe to
- use if FUNCTION is known to already have a declaration. Use of
- this macro implies that there must not be any other macro hiding
- the declaration of FUNCTION; but undefining FUNCTION first is part
- of the poisoning process anyway (although for symbols that are
- provided only via a macro, the result is a compilation error rather
- than a warning containing "literal string"). Also note that in
- C++, it is only safe to use if FUNCTION has no overloads.
-
- For an example, it is possible to poison 'getline' by:
- - adding a call to gl_WARN_ON_USE_PREPARE([[#include <stdio.h>]],
- [getline]) in configure.ac, which potentially defines
- HAVE_RAW_DECL_GETLINE
- - adding this code to a header that wraps the system <stdio.h>:
- #undef getline
- #if HAVE_RAW_DECL_GETLINE
- _GL_WARN_ON_USE (getline, "getline is required by POSIX 2008, but"
- "not universally present; use the gnulib module getline");
- #endif
-
- It is not possible to directly poison global variables. But it is
- possible to write a wrapper accessor function, and poison that
- (less common usage, like &environ, will cause a compilation error
- rather than issue the nice warning, but the end result of informing
- the developer about their portability problem is still achieved):
- #if HAVE_RAW_DECL_ENVIRON
- static inline char ***rpl_environ (void) { return &environ; }
- _GL_WARN_ON_USE (rpl_environ, "environ is not always properly declared");
- # undef environ
- # define environ (*rpl_environ ())
- #endif
- */
-#ifndef _GL_WARN_ON_USE
-
-# if 4 < __GNUC__ || (__GNUC__ == 4 && 3 <= __GNUC_MINOR__)
-/* A compiler attribute is available in gcc versions 4.3.0 and later. */
-# define _GL_WARN_ON_USE(function, message) \
-extern __typeof__ (function) function __attribute__ ((__warning__ (message)))
-# elif __GNUC__ >= 3 && GNULIB_STRICT_CHECKING
-/* Verify the existence of the function. */
-# define _GL_WARN_ON_USE(function, message) \
-extern __typeof__ (function) function
-# else /* Unsupported. */
-# define _GL_WARN_ON_USE(function, message) \
-_GL_WARN_EXTERN_C int _gl_warn_on_use
-# endif
-#endif
-
-/* _GL_WARN_ON_USE_CXX (function, rettype, parameters_and_attributes, "string")
- is like _GL_WARN_ON_USE (function, "string"), except that the function is
- declared with the given prototype, consisting of return type, parameters,
- and attributes.
- This variant is useful for overloaded functions in C++. _GL_WARN_ON_USE does
- not work in this case. */
-#ifndef _GL_WARN_ON_USE_CXX
-# if 4 < __GNUC__ || (__GNUC__ == 4 && 3 <= __GNUC_MINOR__)
-# define _GL_WARN_ON_USE_CXX(function,rettype,parameters_and_attributes,msg) \
-extern rettype function parameters_and_attributes \
- __attribute__ ((__warning__ (msg)))
-# elif __GNUC__ >= 3 && GNULIB_STRICT_CHECKING
-/* Verify the existence of the function. */
-# define _GL_WARN_ON_USE_CXX(function,rettype,parameters_and_attributes,msg) \
-extern rettype function parameters_and_attributes
-# else /* Unsupported. */
-# define _GL_WARN_ON_USE_CXX(function,rettype,parameters_and_attributes,msg) \
-_GL_WARN_EXTERN_C int _gl_warn_on_use
-# endif
-#endif
-
-/* _GL_WARN_EXTERN_C declaration;
- performs the declaration with C linkage. */
-#ifndef _GL_WARN_EXTERN_C
-# if defined __cplusplus
-# define _GL_WARN_EXTERN_C extern "C"
-# else
-# define _GL_WARN_EXTERN_C extern
-# endif
-#endif
+++ /dev/null
-% texinfo.tex -- TeX macros to handle Texinfo files.
-%
-% Load plain if necessary, i.e., if running under initex.
-\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
-%
-\def\texinfoversion{2012-04-06.11}
-%
-% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007, 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
-%
-% This texinfo.tex file is free software: you can redistribute it and/or
-% modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation, either version 3 of the
-% License, or (at your option) any later version.
-%
-% This texinfo.tex file is distributed in the hope that it will be
-% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-% General Public License for more details.
-%
-% You should have received a copy of the GNU General Public License
-% along with this program. If not, see <http://www.gnu.org/licenses/>.
-%
-% As a special exception, when this file is read by TeX when processing
-% a Texinfo source document, you may use the result without
-% restriction. (This has been our intent since Texinfo was invented.)
-%
-% Please try the latest version of texinfo.tex before submitting bug
-% reports; you can get the latest version from:
-% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
-% ftp://tug.org/tex/texinfo.tex
-% (and all CTAN mirrors, see http://www.ctan.org).
-% The texinfo.tex in any given distribution could well be out
-% of date, so if that's what you're using, please check.
-%
-% Send bug reports to bug-texinfo@gnu.org. Please include including a
-% complete document in each bug report with which we can reproduce the
-% problem. Patches are, of course, greatly appreciated.
-%
-% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution. For a simple
-% manual foo.texi, however, you can get away with this:
-% tex foo.texi
-% texindex foo.??
-% tex foo.texi
-% tex foo.texi
-% dvips foo.dvi -o # or whatever; this makes foo.ps.
-% The extra TeX runs get the cross-reference information correct.
-% Sometimes one run after texindex suffices, and sometimes you need more
-% than two; texi2dvi does it as many times as necessary.
-%
-% It is possible to adapt texinfo.tex for other languages, to some
-% extent. You can get the existing language-specific files from the
-% full Texinfo distribution.
-%
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-
-
-\message{Loading texinfo [version \texinfoversion]:}
-
-% If in a .fmt file, print the version number
-% and turn on active characters that we couldn't do earlier because
-% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}%
- \catcode`+=\active \catcode`\_=\active}
-
-\chardef\other=12
-
-% We never want plain's \outer definition of \+ in Texinfo.
-% For @tex, we can use \tabalign.
-\let\+ = \relax
-
-% Save some plain tex macros whose names we will redefine.
-\let\ptexb=\b
-\let\ptexbullet=\bullet
-\let\ptexc=\c
-\let\ptexcomma=\,
-\let\ptexdot=\.
-\let\ptexdots=\dots
-\let\ptexend=\end
-\let\ptexequiv=\equiv
-\let\ptexexclam=\!
-\let\ptexfootnote=\footnote
-\let\ptexgtr=>
-\let\ptexhat=^
-\let\ptexi=\i
-\let\ptexindent=\indent
-\let\ptexinsert=\insert
-\let\ptexlbrace=\{
-\let\ptexless=<
-\let\ptexnewwrite\newwrite
-\let\ptexnoindent=\noindent
-\let\ptexplus=+
-\let\ptexraggedright=\raggedright
-\let\ptexrbrace=\}
-\let\ptexslash=\/
-\let\ptexstar=\*
-\let\ptext=\t
-\let\ptextop=\top
-{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode
-
-% If this character appears in an error message or help string, it
-% starts a new line in the output.
-\newlinechar = `^^J
-
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
- \let\linenumber = \empty % Pre-3.0.
-\else
- \def\linenumber{l.\the\inputlineno:\space}
-\fi
-
-% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
-\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
-\ifx\putworderror\undefined \gdef\putworderror{error}\fi
-\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
-\ifx\putwordin\undefined \gdef\putwordin{in}\fi
-\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
-\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
-\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
-\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
-\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
-\ifx\putwordof\undefined \gdef\putwordof{of}\fi
-\ifx\putwordon\undefined \gdef\putwordon{on}\fi
-\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
-\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
-\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
-\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
-\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
-\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
-\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
-%
-\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
-\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
-\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
-\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
-\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
-\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
-\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
-\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
-\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
-\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
-\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
-\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
-%
-\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
-\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
-\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
-\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
-\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
-
-% Since the category of space is not known, we have to be careful.
-\chardef\spacecat = 10
-\def\spaceisspace{\catcode`\ =\spacecat}
-
-% sometimes characters are active, so we need control sequences.
-\chardef\ampChar = `\&
-\chardef\colonChar = `\:
-\chardef\commaChar = `\,
-\chardef\dashChar = `\-
-\chardef\dotChar = `\.
-\chardef\exclamChar= `\!
-\chardef\hashChar = `\#
-\chardef\lquoteChar= `\`
-\chardef\questChar = `\?
-\chardef\rquoteChar= `\'
-\chardef\semiChar = `\;
-\chardef\slashChar = `\/
-\chardef\underChar = `\_
-
-% Ignore a token.
-%
-\def\gobble#1{}
-
-% The following is used inside several \edef's.
-\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
-
-% Hyphenation fixes.
-\hyphenation{
- Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
- ap-pen-dix bit-map bit-maps
- data-base data-bases eshell fall-ing half-way long-est man-u-script
- man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
- par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
- spell-ing spell-ings
- stand-alone strong-est time-stamp time-stamps which-ever white-space
- wide-spread wrap-around
-}
-
-% Margin to add to right of even pages, to left of odd pages.
-\newdimen\bindingoffset
-\newdimen\normaloffset
-\newdimen\pagewidth \newdimen\pageheight
-
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt }
-
-% Sometimes it is convenient to have everything in the transcript file
-% and nothing on the terminal. We don't just call \tracingall here,
-% since that produces some useless output on the terminal. We also make
-% some effort to order the tracing commands to reduce output in the log
-% file; cf. trace.sty in LaTeX.
-%
-\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
-\def\loggingall{%
- \tracingstats2
- \tracingpages1
- \tracinglostchars2 % 2 gives us more in etex
- \tracingparagraphs1
- \tracingoutput1
- \tracingmacros2
- \tracingrestores1
- \showboxbreadth\maxdimen \showboxdepth\maxdimen
- \ifx\eTeXversion\thisisundefined\else % etex gives us more logging
- \tracingscantokens1
- \tracingifs1
- \tracinggroups1
- \tracingnesting2
- \tracingassigns1
- \fi
- \tracingcommands3 % 3 gives us more in etex
- \errorcontextlines16
-}%
-
-% @errormsg{MSG}. Do the index-like expansions on MSG, but if things
-% aren't perfect, it's not the end of the world, being an error message,
-% after all.
-%
-\def\errormsg{\begingroup \indexnofonts \doerrormsg}
-\def\doerrormsg#1{\errmessage{#1}}
-
-% add check for \lastpenalty to plain's definitions. If the last thing
-% we did was a \nobreak, we don't want to insert more space.
-%
-\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
- \removelastskip\penalty-50\smallskip\fi\fi}
-\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
- \removelastskip\penalty-100\medskip\fi\fi}
-\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
- \removelastskip\penalty-200\bigskip\fi\fi}
-
-% Do @cropmarks to get crop marks.
-%
-\newif\ifcropmarks
-\let\cropmarks = \cropmarkstrue
-%
-% Dimensions to add cropmarks at corners.
-% Added by P. A. MacKay, 12 Nov. 1986
-%
-\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
-\newdimen\cornerlong \cornerlong=1pc
-\newdimen\cornerthick \cornerthick=.3pt
-\newdimen\topandbottommargin \topandbottommargin=.75in
-
-% Output a mark which sets \thischapter, \thissection and \thiscolor.
-% We dump everything together because we only have one kind of mark.
-% This works because we only use \botmark / \topmark, not \firstmark.
-%
-% A mark contains a subexpression of the \ifcase ... \fi construct.
-% \get*marks macros below extract the needed part using \ifcase.
-%
-% Another complication is to let the user choose whether \thischapter
-% (\thissection) refers to the chapter (section) in effect at the top
-% of a page, or that at the bottom of a page. The solution is
-% described on page 260 of The TeXbook. It involves outputting two
-% marks for the sectioning macros, one before the section break, and
-% one after. I won't pretend I can describe this better than DEK...
-\def\domark{%
- \toks0=\expandafter{\lastchapterdefs}%
- \toks2=\expandafter{\lastsectiondefs}%
- \toks4=\expandafter{\prevchapterdefs}%
- \toks6=\expandafter{\prevsectiondefs}%
- \toks8=\expandafter{\lastcolordefs}%
- \mark{%
- \the\toks0 \the\toks2
- \noexpand\or \the\toks4 \the\toks6
- \noexpand\else \the\toks8
- }%
-}
-% \topmark doesn't work for the very first chapter (after the title
-% page or the contents), so we use \firstmark there -- this gets us
-% the mark with the chapter defs, unless the user sneaks in, e.g.,
-% @setcolor (or @url, or @link, etc.) between @contents and the very
-% first @chapter.
-\def\gettopheadingmarks{%
- \ifcase0\topmark\fi
- \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
-}
-\def\getbottomheadingmarks{\ifcase1\botmark\fi}
-\def\getcolormarks{\ifcase2\topmark\fi}
-
-% Avoid "undefined control sequence" errors.
-\def\lastchapterdefs{}
-\def\lastsectiondefs{}
-\def\prevchapterdefs{}
-\def\prevsectiondefs{}
-\def\lastcolordefs{}
-
-% Main output routine.
-\chardef\PAGE = 255
-\output = {\onepageout{\pagecontents\PAGE}}
-
-\newbox\headlinebox
-\newbox\footlinebox
-
-% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions, but you have to call it yourself.
-\def\onepageout#1{%
- \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
- %
- \ifodd\pageno \advance\hoffset by \bindingoffset
- \else \advance\hoffset by -\bindingoffset\fi
- %
- % Do this outside of the \shipout so @code etc. will be expanded in
- % the headline as they should be, not taken literally (outputting ''code).
- \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
- \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
- \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
- \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
- %
- {%
- % Have to do this stuff outside the \shipout because we want it to
- % take effect in \write's, yet the group defined by the \vbox ends
- % before the \shipout runs.
- %
- \indexdummies % don't expand commands in the output.
- \normalturnoffactive % \ in index entries must not stay \, e.g., if
- % the page break happens to be in the middle of an example.
- % We don't want .vr (or whatever) entries like this:
- % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
- % "\acronym" won't work when it's read back in;
- % it needs to be
- % {\code {{\tt \backslashcurfont }acronym}
- \shipout\vbox{%
- % Do this early so pdf references go to the beginning of the page.
- \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
- %
- \ifcropmarks \vbox to \outervsize\bgroup
- \hsize = \outerhsize
- \vskip-\topandbottommargin
- \vtop to0pt{%
- \line{\ewtop\hfil\ewtop}%
- \nointerlineskip
- \line{%
- \vbox{\moveleft\cornerthick\nstop}%
- \hfill
- \vbox{\moveright\cornerthick\nstop}%
- }%
- \vss}%
- \vskip\topandbottommargin
- \line\bgroup
- \hfil % center the page within the outer (page) hsize.
- \ifodd\pageno\hskip\bindingoffset\fi
- \vbox\bgroup
- \fi
- %
- \unvbox\headlinebox
- \pagebody{#1}%
- \ifdim\ht\footlinebox > 0pt
- % Only leave this space if the footline is nonempty.
- % (We lessened \vsize for it in \oddfootingyyy.)
- % The \baselineskip=24pt in plain's \makefootline has no effect.
- \vskip 24pt
- \unvbox\footlinebox
- \fi
- %
- \ifcropmarks
- \egroup % end of \vbox\bgroup
- \hfil\egroup % end of (centering) \line\bgroup
- \vskip\topandbottommargin plus1fill minus1fill
- \boxmaxdepth = \cornerthick
- \vbox to0pt{\vss
- \line{%
- \vbox{\moveleft\cornerthick\nsbot}%
- \hfill
- \vbox{\moveright\cornerthick\nsbot}%
- }%
- \nointerlineskip
- \line{\ewbot\hfil\ewbot}%
- }%
- \egroup % \vbox from first cropmarks clause
- \fi
- }% end of \shipout\vbox
- }% end of group with \indexdummies
- \advancepageno
- \ifnum\outputpenalty>-20000 \else\dosupereject\fi
-}
-
-\newinsert\margin \dimen\margin=\maxdimen
-
-\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
-{\catcode`\@ =11
-\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
-% marginal hacks, juha@viisa.uucp (Juha Takala)
-\ifvoid\margin\else % marginal info is present
- \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1\relax \unvbox#1\relax
-\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
-\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
-}
-
-% Here are the rules for the cropmarks. Note that they are
-% offset so that the space between them is truly \outerhsize or \outervsize
-% (P. A. MacKay, 12 November, 1986)
-%
-\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
-\def\nstop{\vbox
- {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
-\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
-\def\nsbot{\vbox
- {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
-
-% Parse an argument, then pass it to #1. The argument is the rest of
-% the input line (except we remove a trailing comment). #1 should be a
-% macro which expects an ordinary undelimited TeX argument.
-%
-\def\parsearg{\parseargusing{}}
-\def\parseargusing#1#2{%
- \def\argtorun{#2}%
- \begingroup
- \obeylines
- \spaceisspace
- #1%
- \parseargline\empty% Insert the \empty token, see \finishparsearg below.
-}
-
-{\obeylines %
- \gdef\parseargline#1^^M{%
- \endgroup % End of the group started in \parsearg.
- \argremovecomment #1\comment\ArgTerm%
- }%
-}
-
-% First remove any @comment, then any @c comment.
-\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
-\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
-
-% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
-%
-% \argremovec might leave us with trailing space, e.g.,
-% @end itemize @c foo
-% This space token undergoes the same procedure and is eventually removed
-% by \finishparsearg.
-%
-\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
-\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
-\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
- \def\temp{#3}%
- \ifx\temp\empty
- % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
- \let\temp\finishparsearg
- \else
- \let\temp\argcheckspaces
- \fi
- % Put the space token in:
- \temp#1 #3\ArgTerm
-}
-
-% If a _delimited_ argument is enclosed in braces, they get stripped; so
-% to get _exactly_ the rest of the line, we had to prevent such situation.
-% We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \argtorun.
-% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
-% either the null string, or it ends with \^^M---thus there is no danger
-% that a pair of braces would be stripped.
-%
-% But first, we have to remove the trailing space token.
-%
-\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
-
-% \parseargdef\foo{...}
-% is roughly equivalent to
-% \def\foo{\parsearg\Xfoo}
-% \def\Xfoo#1{...}
-%
-% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
-% favourite TeX trick. --kasal, 16nov03
-
-\def\parseargdef#1{%
- \expandafter \doparseargdef \csname\string#1\endcsname #1%
-}
-\def\doparseargdef#1#2{%
- \def#2{\parsearg#1}%
- \def#1##1%
-}
-
-% Several utility definitions with active space:
-{
- \obeyspaces
- \gdef\obeyedspace{ }
-
- % Make each space character in the input produce a normal interword
- % space in the output. Don't allow a line break at this space, as this
- % is used only in environments like @example, where each line of input
- % should produce a line of output anyway.
- %
- \gdef\sepspaces{\obeyspaces\let =\tie}
-
- % If an index command is used in an @example environment, any spaces
- % therein should become regular spaces in the raw index file, not the
- % expansion of \tie (\leavevmode \penalty \@M \ ).
- \gdef\unsepspaces{\let =\space}
-}
-
-
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
-
-% Define the framework for environments in texinfo.tex. It's used like this:
-%
-% \envdef\foo{...}
-% \def\Efoo{...}
-%
-% It's the responsibility of \envdef to insert \begingroup before the
-% actual body; @end closes the group after calling \Efoo. \envdef also
-% defines \thisenv, so the current environment is known; @end checks
-% whether the environment name matches. The \checkenv macro can also be
-% used to check whether the current environment is the one expected.
-%
-% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
-% are not treated as environments; they don't open a group. (The
-% implementation of @end takes care not to call \endgroup in this
-% special case.)
-
-
-% At run-time, environments start with this:
-\def\startenvironment#1{\begingroup\def\thisenv{#1}}
-% initialize
-\let\thisenv\empty
-
-% ... but they get defined via ``\envdef\foo{...}'':
-\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
-\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
-
-% Check whether we're in the right environment:
-\def\checkenv#1{%
- \def\temp{#1}%
- \ifx\thisenv\temp
- \else
- \badenverr
- \fi
-}
-
-% Environment mismatch, #1 expected:
-\def\badenverr{%
- \errhelp = \EMsimple
- \errmessage{This command can appear only \inenvironment\temp,
- not \inenvironment\thisenv}%
-}
-\def\inenvironment#1{%
- \ifx#1\empty
- outside of any environment%
- \else
- in environment \expandafter\string#1%
- \fi
-}
-
-% @end foo executes the definition of \Efoo.
-% But first, it executes a specialized version of \checkenv
-%
-\parseargdef\end{%
- \if 1\csname iscond.#1\endcsname
- \else
- % The general wording of \badenverr may not be ideal.
- \expandafter\checkenv\csname#1\endcsname
- \csname E#1\endcsname
- \endgroup
- \fi
-}
-
-\newhelp\EMsimple{Press RETURN to continue.}
-
-
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- % Avoid using \@M directly, because that causes trouble
- % if the definition is written into an index file.
- \global\let\tiepenalty = \@M
- \gdef\tie{\leavevmode\penalty\tiepenalty\ }
-}
-
-% @: forces normal size whitespace following.
-\def\:{\spacefactor=1000 }
-
-% @* forces a line break.
-\def\*{\hfil\break\hbox{}\ignorespaces}
-
-% @/ allows a line break.
-\let\/=\allowbreak
-
-% @. is an end-of-sentence period.
-\def\.{.\spacefactor=\endofsentencespacefactor\space}
-
-% @! is an end-of-sentence bang.
-\def\!{!\spacefactor=\endofsentencespacefactor\space}
-
-% @? is an end-of-sentence query.
-\def\?{?\spacefactor=\endofsentencespacefactor\space}
-
-% @frenchspacing on|off says whether to put extra space after punctuation.
-%
-\def\onword{on}
-\def\offword{off}
-%
-\parseargdef\frenchspacing{%
- \def\temp{#1}%
- \ifx\temp\onword \plainfrenchspacing
- \else\ifx\temp\offword \plainnonfrenchspacing
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
- \fi\fi
-}
-
-% @w prevents a word break. Without the \leavevmode, @w at the
-% beginning of a paragraph, when TeX is still in vertical mode, would
-% produce a whole line of output instead of starting the paragraph.
-\def\w#1{\leavevmode\hbox{#1}}
-
-% @group ... @end group forces ... to be all on one page, by enclosing
-% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
-% to keep its height that of a normal line. According to the rules for
-% \topskip (p.114 of the TeXbook), the glue inserted is
-% max (\topskip - \ht (first item), 0). If that height is large,
-% therefore, no glue is inserted, and the space between the headline and
-% the text is small, which looks bad.
-%
-% Another complication is that the group might be very large. This can
-% cause the glue on the previous page to be unduly stretched, because it
-% does not have much material. In this case, it's better to add an
-% explicit \vfill so that the extra space is at the bottom. The
-% threshold for doing this is if the group is more than \vfilllimit
-% percent of a page (\vfilllimit can be changed inside of @tex).
-%
-\newbox\groupbox
-\def\vfilllimit{0.7}
-%
-\envdef\group{%
- \ifnum\catcode`\^^M=\active \else
- \errhelp = \groupinvalidhelp
- \errmessage{@group invalid in context where filling is enabled}%
- \fi
- \startsavinginserts
- %
- \setbox\groupbox = \vtop\bgroup
- % Do @comment since we are called inside an environment such as
- % @example, where each end-of-line in the input causes an
- % end-of-line in the output. We don't want the end-of-line after
- % the `@group' to put extra space in the output. Since @group
- % should appear on a line by itself (according to the Texinfo
- % manual), we don't worry about eating any user text.
- \comment
-}
-%
-% The \vtop produces a box with normal height and large depth; thus, TeX puts
-% \baselineskip glue before it, and (when the next line of text is done)
-% \lineskip glue after it. Thus, space below is not quite equal to space
-% above. But it's pretty close.
-\def\Egroup{%
- % To get correct interline space between the last line of the group
- % and the first line afterwards, we have to propagate \prevdepth.
- \endgraf % Not \par, as it may have been set to \lisppar.
- \global\dimen1 = \prevdepth
- \egroup % End the \vtop.
- % \dimen0 is the vertical size of the group's box.
- \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
- % \dimen2 is how much space is left on the page (more or less).
- \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
- % if the group doesn't fit on the current page, and it's a big big
- % group, force a page break.
- \ifdim \dimen0 > \dimen2
- \ifdim \pagetotal < \vfilllimit\pageheight
- \page
- \fi
- \fi
- \box\groupbox
- \prevdepth = \dimen1
- \checkinserts
-}
-%
-% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
-% message, so this ends up printing `@group can only ...'.
-%
-\newhelp\groupinvalidhelp{%
-group can only be used in environments such as @example,^^J%
-where each line of input produces a line of output.}
-
-% @need space-in-mils
-% forces a page break if there is not space-in-mils remaining.
-
-\newdimen\mil \mil=0.001in
-
-\parseargdef\need{%
- % Ensure vertical mode, so we don't make a big box in the middle of a
- % paragraph.
- \par
- %
- % If the @need value is less than one line space, it's useless.
- \dimen0 = #1\mil
- \dimen2 = \ht\strutbox
- \advance\dimen2 by \dp\strutbox
- \ifdim\dimen0 > \dimen2
- %
- % Do a \strut just to make the height of this box be normal, so the
- % normal leading is inserted relative to the preceding line.
- % And a page break here is fine.
- \vtop to #1\mil{\strut\vfil}%
- %
- % TeX does not even consider page breaks if a penalty added to the
- % main vertical list is 10000 or more. But in order to see if the
- % empty box we just added fits on the page, we must make it consider
- % page breaks. On the other hand, we don't want to actually break the
- % page after the empty box. So we use a penalty of 9999.
- %
- % There is an extremely small chance that TeX will actually break the
- % page at this \penalty, if there are no other feasible breakpoints in
- % sight. (If the user is using lots of big @group commands, which
- % almost-but-not-quite fill up a page, TeX will have a hard time doing
- % good page breaking, for example.) However, I could not construct an
- % example where a page broke at this \penalty; if it happens in a real
- % document, then we can reconsider our strategy.
- \penalty9999
- %
- % Back up by the size of the box, whether we did a page break or not.
- \kern -#1\mil
- %
- % Do not allow a page break right after this kern.
- \nobreak
- \fi
-}
-
-% @br forces paragraph break (and is undocumented).
-
-\let\br = \par
-
-% @page forces the start of a new page.
-%
-\def\page{\par\vfill\supereject}
-
-% @exdent text....
-% outputs text on separate line in roman font, starting at standard page margin
-
-% This records the amount of indent in the innermost environment.
-% That's how much \exdent should take out.
-\newskip\exdentamount
-
-% This defn is used inside fill environments such as @defun.
-\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
-
-% This defn is used inside nofill environments such as @example.
-\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
- \leftline{\hskip\leftskip{\rm#1}}}}
-
-% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
-% paragraph. For more general purposes, use the \margin insertion
-% class. WHICH is `l' or `r'. Not documented, written for gawk manual.
-%
-\newskip\inmarginspacing \inmarginspacing=1cm
-\def\strutdepth{\dp\strutbox}
-%
-\def\doinmargin#1#2{\strut\vadjust{%
- \nobreak
- \kern-\strutdepth
- \vtop to \strutdepth{%
- \baselineskip=\strutdepth
- \vss
- % if you have multiple lines of stuff to put here, you'll need to
- % make the vbox yourself of the appropriate size.
- \ifx#1l%
- \llap{\ignorespaces #2\hskip\inmarginspacing}%
- \else
- \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
- \fi
- \null
- }%
-}}
-\def\inleftmargin{\doinmargin l}
-\def\inrightmargin{\doinmargin r}
-%
-% @inmargin{TEXT [, RIGHT-TEXT]}
-% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
-% else use TEXT for both).
-%
-\def\inmargin#1{\parseinmargin #1,,\finish}
-\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \def\lefttext{#1}% have both texts
- \def\righttext{#2}%
- \else
- \def\lefttext{#1}% have only one text
- \def\righttext{#1}%
- \fi
- %
- \ifodd\pageno
- \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
- \else
- \def\temp{\inleftmargin\lefttext}%
- \fi
- \temp
-}
-
-% @| inserts a changebar to the left of the current line. It should
-% surround any changed text. This approach does *not* work if the
-% change spans more than two lines of output. To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change). This command
-% is not documented, not supported, and doesn't work.
-%
-\def\|{%
- % \vadjust can only be used in horizontal mode.
- \leavevmode
- %
- % Append this vertical mode material after the current line in the output.
- \vadjust{%
- % We want to insert a rule with the height and depth of the current
- % leading; that is exactly what \strutbox is supposed to record.
- \vskip-\baselineskip
- %
- % \vadjust-items are inserted at the left edge of the type. So
- % the \llap here moves out into the left-hand margin.
- \llap{%
- %
- % For a thicker or thinner bar, change the `1pt'.
- \vrule height\baselineskip width1pt
- %
- % This is the space between the bar and the text.
- \hskip 12pt
- }%
- }%
-}
-
-% @include FILE -- \input text of FILE.
-%
-\def\include{\parseargusing\filenamecatcodes\includezzz}
-\def\includezzz#1{%
- \pushthisfilestack
- \def\thisfile{#1}%
- {%
- \makevalueexpandable % we want to expand any @value in FILE.
- \turnoffactive % and allow special characters in the expansion
- \indexnofonts % Allow `@@' and other weird things in file names.
- \wlog{texinfo.tex: doing @include of #1^^J}%
- \edef\temp{\noexpand\input #1 }%
- %
- % This trickery is to read FILE outside of a group, in case it makes
- % definitions, etc.
- \expandafter
- }\temp
- \popthisfilestack
-}
-\def\filenamecatcodes{%
- \catcode`\\=\other
- \catcode`~=\other
- \catcode`^=\other
- \catcode`_=\other
- \catcode`|=\other
- \catcode`<=\other
- \catcode`>=\other
- \catcode`+=\other
- \catcode`-=\other
- \catcode`\`=\other
- \catcode`\'=\other
-}
-
-\def\pushthisfilestack{%
- \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
-}
-\def\pushthisfilestackX{%
- \expandafter\pushthisfilestackY\thisfile\StackTerm
-}
-\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
- \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
-}
-
-\def\popthisfilestack{\errthisfilestackempty}
-\def\errthisfilestackempty{\errmessage{Internal error:
- the stack of filenames is empty.}}
-%
-\def\thisfile{}
-
-% @center line
-% outputs that line, centered.
-%
-\parseargdef\center{%
- \ifhmode
- \let\centersub\centerH
- \else
- \let\centersub\centerV
- \fi
- \centersub{\hfil \ignorespaces#1\unskip \hfil}%
- \let\centersub\relax % don't let the definition persist, just in case
-}
-\def\centerH#1{{%
- \hfil\break
- \advance\hsize by -\leftskip
- \advance\hsize by -\rightskip
- \line{#1}%
- \break
-}}
-%
-\newcount\centerpenalty
-\def\centerV#1{%
- % The idea here is the same as in \startdefun, \cartouche, etc.: if
- % @center is the first thing after a section heading, we need to wipe
- % out the negative parskip inserted by \sectionheading, but still
- % prevent a page break here.
- \centerpenalty = \lastpenalty
- \ifnum\centerpenalty>10000 \vskip\parskip \fi
- \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
- \line{\kern\leftskip #1\kern\rightskip}%
-}
-
-% @sp n outputs n lines of vertical space
-%
-\parseargdef\sp{\vskip #1\baselineskip}
-
-% @comment ...line which is ignored...
-% @c is the same as @comment
-% @ignore ... @end ignore is another way to write a comment
-%
-\def\comment{\begingroup \catcode`\^^M=\other%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
-\commentxxx}
-{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-%
-\let\c=\comment
-
-% @paragraphindent NCHARS
-% We'll use ems for NCHARS, close enough.
-% NCHARS can also be the word `asis' or `none'.
-% We cannot feasibly implement @paragraphindent asis, though.
-%
-\def\asisword{asis} % no translation, these are keywords
-\def\noneword{none}
-%
-\parseargdef\paragraphindent{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \defaultparindent = 0pt
- \else
- \defaultparindent = #1em
- \fi
- \fi
- \parindent = \defaultparindent
-}
-
-% @exampleindent NCHARS
-% We'll use ems for NCHARS like @paragraphindent.
-% It seems @exampleindent asis isn't necessary, but
-% I preserve it to make it similar to @paragraphindent.
-\parseargdef\exampleindent{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \lispnarrowing = 0pt
- \else
- \lispnarrowing = #1em
- \fi
- \fi
-}
-
-% @firstparagraphindent WORD
-% If WORD is `none', then suppress indentation of the first paragraph
-% after a section heading. If WORD is `insert', then do indent at such
-% paragraphs.
-%
-% The paragraph indentation is suppressed or not by calling
-% \suppressfirstparagraphindent, which the sectioning commands do.
-% We switch the definition of this back and forth according to WORD.
-% By default, we suppress indentation.
-%
-\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
-\def\insertword{insert}
-%
-\parseargdef\firstparagraphindent{%
- \def\temp{#1}%
- \ifx\temp\noneword
- \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
- \else\ifx\temp\insertword
- \let\suppressfirstparagraphindent = \relax
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @firstparagraphindent option `\temp'}%
- \fi\fi
-}
-
-% Here is how we actually suppress indentation. Redefine \everypar to
-% \kern backwards by \parindent, and then reset itself to empty.
-%
-% We also make \indent itself not actually do anything until the next
-% paragraph.
-%
-\gdef\dosuppressfirstparagraphindent{%
- \gdef\indent{%
- \restorefirstparagraphindent
- \indent
- }%
- \gdef\noindent{%
- \restorefirstparagraphindent
- \noindent
- }%
- \global\everypar = {%
- \kern -\parindent
- \restorefirstparagraphindent
- }%
-}
-
-\gdef\restorefirstparagraphindent{%
- \global \let \indent = \ptexindent
- \global \let \noindent = \ptexnoindent
- \global \everypar = {}%
-}
-
-
-% @refill is a no-op.
-\let\refill=\relax
-
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% @setfilename is done at the beginning of every texinfo file.
-% So open here the files we need to have open while reading the input.
-% This makes it possible to make a .fmt file for texinfo.
-\def\setfilename{%
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
- \iflinks
- \tryauxfile
- % Open the new aux file. TeX will close it automatically at exit.
- \immediate\openout\auxfile=\jobname.aux
- \fi % \openindices needs to do some work in any case.
- \openindices
- \let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- \openin 1 texinfo.cnf
- \ifeof 1 \else \input texinfo.cnf \fi
- \closein 1
- %
- \comment % Ignore the actual filename.
-}
-
-% Called from \setfilename.
-%
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
-}
-
-% @bye.
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-
-
-\message{pdf,}
-% adobe `portable' document format
-\newcount\tempnum
-\newcount\lnkcount
-\newtoks\filename
-\newcount\filenamelength
-\newcount\pgn
-\newtoks\toksA
-\newtoks\toksB
-\newtoks\toksC
-\newtoks\toksD
-\newbox\boxA
-\newcount\countA
-\newif\ifpdf
-\newif\ifpdfmakepagedest
-
-% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
-% can be set). So we test for \relax and 0 as well as being undefined.
-\ifx\pdfoutput\thisisundefined
-\else
- \ifx\pdfoutput\relax
- \else
- \ifcase\pdfoutput
- \else
- \pdftrue
- \fi
- \fi
-\fi
-
-% PDF uses PostScript string constants for the names of xref targets,
-% for display in the outlines, and in other places. Thus, we have to
-% double any backslashes. Otherwise, a name like "\node" will be
-% interpreted as a newline (\n), followed by o, d, e. Not good.
-%
-% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
-% related messages. The final outcome is that it is up to the TeX user
-% to double the backslashes and otherwise make the string valid, so
-% that's what we do. pdftex 1.30.0 (ca.2005) introduced a primitive to
-% do this reliably, so we use it.
-
-% #1 is a control sequence in which to do the replacements,
-% which we \xdef.
-\def\txiescapepdf#1{%
- \ifx\pdfescapestring\relax
- % No primitive available; should we give a warning or log?
- % Many times it won't matter.
- \else
- % The expandable \pdfescapestring primitive escapes parentheses,
- % backslashes, and other special chars.
- \xdef#1{\pdfescapestring{#1}}%
- \fi
-}
-
-\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
-with PDF output, and none of those formats could be found. (.eps cannot
-be supported due to the design of the PDF format; use regular TeX (DVI
-output) for that.)}
-
-\ifpdf
- %
- % Color manipulation macros based on pdfcolor.tex,
- % except using rgb instead of cmyk; the latter is said to render as a
- % very dark gray on-screen and a very dark halftone in print, instead
- % of actual black.
- \def\rgbDarkRed{0.50 0.09 0.12}
- \def\rgbBlack{0 0 0}
- %
- % k sets the color for filling (usual text, etc.);
- % K sets the color for stroking (thin rules, e.g., normal _'s).
- \def\pdfsetcolor#1{\pdfliteral{#1 rg #1 RG}}
- %
- % Set color, and create a mark which defines \thiscolor accordingly,
- % so that \makeheadline knows which color to restore.
- \def\setcolor#1{%
- \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
- \domark
- \pdfsetcolor{#1}%
- }
- %
- \def\maincolor{\rgbBlack}
- \pdfsetcolor{\maincolor}
- \edef\thiscolor{\maincolor}
- \def\lastcolordefs{}
- %
- \def\makefootline{%
- \baselineskip24pt
- \line{\pdfsetcolor{\maincolor}\the\footline}%
- }
- %
- \def\makeheadline{%
- \vbox to 0pt{%
- \vskip-22.5pt
- \line{%
- \vbox to8.5pt{}%
- % Extract \thiscolor definition from the marks.
- \getcolormarks
- % Typeset the headline with \maincolor, then restore the color.
- \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
- }%
- \vss
- }%
- \nointerlineskip
- }
- %
- %
- \pdfcatalog{/PageMode /UseOutlines}
- %
- % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
- \def\dopdfimage#1#2#3{%
- \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
- \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
- %
- % pdftex (and the PDF format) support .pdf, .png, .jpg (among
- % others). Let's try in that order, PDF first since if
- % someone has a scalable image, presumably better to use that than a
- % bitmap.
- \let\pdfimgext=\empty
- \begingroup
- \openin 1 #1.pdf \ifeof 1
- \openin 1 #1.PDF \ifeof 1
- \openin 1 #1.png \ifeof 1
- \openin 1 #1.jpg \ifeof 1
- \openin 1 #1.jpeg \ifeof 1
- \openin 1 #1.JPG \ifeof 1
- \errhelp = \nopdfimagehelp
- \errmessage{Could not find image file #1 for pdf}%
- \else \gdef\pdfimgext{JPG}%
- \fi
- \else \gdef\pdfimgext{jpeg}%
- \fi
- \else \gdef\pdfimgext{jpg}%
- \fi
- \else \gdef\pdfimgext{png}%
- \fi
- \else \gdef\pdfimgext{PDF}%
- \fi
- \else \gdef\pdfimgext{pdf}%
- \fi
- \closein 1
- \endgroup
- %
- % without \immediate, ancient pdftex seg faults when the same image is
- % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
- \ifnum\pdftexversion < 14
- \immediate\pdfimage
- \else
- \immediate\pdfximage
- \fi
- \ifdim \wd0 >0pt width \pdfimagewidth \fi
- \ifdim \wd2 >0pt height \pdfimageheight \fi
- \ifnum\pdftexversion<13
- #1.\pdfimgext
- \else
- {#1.\pdfimgext}%
- \fi
- \ifnum\pdftexversion < 14 \else
- \pdfrefximage \pdflastximage
- \fi}
- %
- \def\pdfmkdest#1{{%
- % We have to set dummies so commands such as @code, and characters
- % such as \, aren't expanded when present in a section title.
- \indexnofonts
- \turnoffactive
- \makevalueexpandable
- \def\pdfdestname{#1}%
- \txiescapepdf\pdfdestname
- \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
- }}
- %
- % used to mark target names; must be expandable.
- \def\pdfmkpgn#1{#1}
- %
- % by default, use a color that is dark enough to print on paper as
- % nearly black, but still distinguishable for online viewing.
- \def\urlcolor{\rgbDarkRed}
- \def\linkcolor{\rgbDarkRed}
- \def\endlink{\setcolor{\maincolor}\pdfendlink}
- %
- % Adding outlines to PDF; macros for calculating structure of outlines
- % come from Petr Olsak
- \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
- \else \csname#1\endcsname \fi}
- \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
- \advance\tempnum by 1
- \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
- %
- % #1 is the section text, which is what will be displayed in the
- % outline by the pdf viewer. #2 is the pdf expression for the number
- % of subentries (or empty, for subsubsections). #3 is the node text,
- % which might be empty if this toc entry had no corresponding node.
- % #4 is the page number
- %
- \def\dopdfoutline#1#2#3#4{%
- % Generate a link to the node text if that exists; else, use the
- % page number. We could generate a destination for the section
- % text in the case where a section has no node, but it doesn't
- % seem worth the trouble, since most documents are normally structured.
- \edef\pdfoutlinedest{#3}%
- \ifx\pdfoutlinedest\empty
- \def\pdfoutlinedest{#4}%
- \else
- \txiescapepdf\pdfoutlinedest
- \fi
- %
- % Also escape PDF chars in the display string.
- \edef\pdfoutlinetext{#1}%
- \txiescapepdf\pdfoutlinetext
- %
- \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
- }
- %
- \def\pdfmakeoutlines{%
- \begingroup
- % Read toc silently, to get counts of subentries for \pdfoutline.
- \def\partentry##1##2##3##4{}% ignore parts in the outlines
- \def\numchapentry##1##2##3##4{%
- \def\thischapnum{##2}%
- \def\thissecnum{0}%
- \def\thissubsecnum{0}%
- }%
- \def\numsecentry##1##2##3##4{%
- \advancenumber{chap\thischapnum}%
- \def\thissecnum{##2}%
- \def\thissubsecnum{0}%
- }%
- \def\numsubsecentry##1##2##3##4{%
- \advancenumber{sec\thissecnum}%
- \def\thissubsecnum{##2}%
- }%
- \def\numsubsubsecentry##1##2##3##4{%
- \advancenumber{subsec\thissubsecnum}%
- }%
- \def\thischapnum{0}%
- \def\thissecnum{0}%
- \def\thissubsecnum{0}%
- %
- % use \def rather than \let here because we redefine \chapentry et
- % al. a second time, below.
- \def\appentry{\numchapentry}%
- \def\appsecentry{\numsecentry}%
- \def\appsubsecentry{\numsubsecentry}%
- \def\appsubsubsecentry{\numsubsubsecentry}%
- \def\unnchapentry{\numchapentry}%
- \def\unnsecentry{\numsecentry}%
- \def\unnsubsecentry{\numsubsecentry}%
- \def\unnsubsubsecentry{\numsubsubsecentry}%
- \readdatafile{toc}%
- %
- % Read toc second time, this time actually producing the outlines.
- % The `-' means take the \expnumber as the absolute number of
- % subentries, which we calculated on our first read of the .toc above.
- %
- % We use the node names as the destinations.
- \def\numchapentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
- \def\numsecentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
- \def\numsubsecentry##1##2##3##4{%
- \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
- \def\numsubsubsecentry##1##2##3##4{% count is always zero
- \dopdfoutline{##1}{}{##3}{##4}}%
- %
- % PDF outlines are displayed using system fonts, instead of
- % document fonts. Therefore we cannot use special characters,
- % since the encoding is unknown. For example, the eogonek from
- % Latin 2 (0xea) gets translated to a | character. Info from
- % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
- %
- % TODO this right, we have to translate 8-bit characters to
- % their "best" equivalent, based on the @documentencoding. Too
- % much work for too little return. Just use the ASCII equivalents
- % we use for the index sort strings.
- %
- \indexnofonts
- \setupdatafile
- % We can have normal brace characters in the PDF outlines, unlike
- % Texinfo index files. So set that up.
- \def\{{\lbracecharliteral}%
- \def\}{\rbracecharliteral}%
- \catcode`\\=\active \otherbackslash
- \input \tocreadfilename
- \endgroup
- }
- {\catcode`[=1 \catcode`]=2
- \catcode`{=\other \catcode`}=\other
- \gdef\lbracecharliteral[{]%
- \gdef\rbracecharliteral[}]%
- ]
- %
- \def\skipspaces#1{\def\PP{#1}\def\D{|}%
- \ifx\PP\D\let\nextsp\relax
- \else\let\nextsp\skipspaces
- \ifx\p\space\else\addtokens{\filename}{\PP}%
- \advance\filenamelength by 1
- \fi
- \fi
- \nextsp}
- \def\getfilename#1{%
- \filenamelength=0
- % If we don't expand the argument now, \skipspaces will get
- % snagged on things like "@value{foo}".
- \edef\temp{#1}%
- \expandafter\skipspaces\temp|\relax
- }
- \ifnum\pdftexversion < 14
- \let \startlink \pdfannotlink
- \else
- \let \startlink \pdfstartlink
- \fi
- % make a live url in pdf output.
- \def\pdfurl#1{%
- \begingroup
- % it seems we really need yet another set of dummies; have not
- % tried to figure out what each command should do in the context
- % of @url. for now, just make @/ a no-op, that's the only one
- % people have actually reported a problem with.
- %
- \normalturnoffactive
- \def\@{@}%
- \let\/=\empty
- \makevalueexpandable
- % do we want to go so far as to use \indexnofonts instead of just
- % special-casing \var here?
- \def\var##1{##1}%
- %
- \leavevmode\setcolor{\urlcolor}%
- \startlink attr{/Border [0 0 0]}%
- user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
- \endgroup}
- \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
- \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
- \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
- \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
- \def\maketoks{%
- \expandafter\poptoks\the\toksA|ENDTOKS|\relax
- \ifx\first0\adn0
- \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
- \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
- \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
- \else
- \ifnum0=\countA\else\makelink\fi
- \ifx\first.\let\next=\done\else
- \let\next=\maketoks
- \addtokens{\toksB}{\the\toksD}
- \ifx\first,\addtokens{\toksB}{\space}\fi
- \fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \next}
- \def\makelink{\addtokens{\toksB}%
- {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
- \def\pdflink#1{%
- \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
- \setcolor{\linkcolor}#1\endlink}
- \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\else
- % non-pdf mode
- \let\pdfmkdest = \gobble
- \let\pdfurl = \gobble
- \let\endlink = \relax
- \let\setcolor = \gobble
- \let\pdfsetcolor = \gobble
- \let\pdfmakeoutlines = \relax
-\fi % \ifx\pdfoutput
-
-
-\message{fonts,}
-
-% Change the current font style to #1, remembering it in \curfontstyle.
-% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
-% italics, not bold italics.
-%
-\def\setfontstyle#1{%
- \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
- \csname ten#1\endcsname % change the current font
-}
-
-% Select #1 fonts with the current style.
-%
-\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
-
-\def\rm{\fam=0 \setfontstyle{rm}}
-\def\it{\fam=\itfam \setfontstyle{it}}
-\def\sl{\fam=\slfam \setfontstyle{sl}}
-\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
-\def\tt{\fam=\ttfam \setfontstyle{tt}}
-
-% Unfortunately, we have to override this for titles and the like, since
-% in those cases "rm" is bold. Sigh.
-\def\rmisbold{\rm\def\curfontstyle{bf}}
-
-% Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf.
-\newfam\sffam
-\def\sf{\fam=\sffam \setfontstyle{sf}}
-\let\li = \sf % Sometimes we call it \li, not \sf.
-
-% We don't need math for this font style.
-\def\ttsl{\setfontstyle{ttsl}}
-
-
-% Default leading.
-\newdimen\textleading \textleading = 13.2pt
-
-% Set the baselineskip to #1, and the lineskip and strut size
-% correspondingly. There is no deep meaning behind these magic numbers
-% used as factors; they just match (closely enough) what Knuth defined.
-%
-\def\lineskipfactor{.08333}
-\def\strutheightpercent{.70833}
-\def\strutdepthpercent {.29167}
-%
-% can get a sort of poor man's double spacing by redefining this.
-\def\baselinefactor{1}
-%
-\def\setleading#1{%
- \dimen0 = #1\relax
- \normalbaselineskip = \baselinefactor\dimen0
- \normallineskip = \lineskipfactor\normalbaselineskip
- \normalbaselines
- \setbox\strutbox =\hbox{%
- \vrule width0pt height\strutheightpercent\baselineskip
- depth \strutdepthpercent \baselineskip
- }%
-}
-
-% PDF CMaps. See also LaTeX's t1.cmap.
-%
-% do nothing with this by default.
-\expandafter\let\csname cmapOT1\endcsname\gobble
-\expandafter\let\csname cmapOT1IT\endcsname\gobble
-\expandafter\let\csname cmapOT1TT\endcsname\gobble
-
-% if we are producing pdf, and we have \pdffontattr, then define cmaps.
-% (\pdffontattr was introduced many years ago, but people still run
-% older pdftex's; it's easy to conditionalize, so we do.)
-\ifpdf \ifx\pdffontattr\thisisundefined \else
- \begingroup
- \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
- \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
-%%DocumentNeededResources: ProcSet (CIDInit)
-%%IncludeResource: ProcSet (CIDInit)
-%%BeginResource: CMap (TeX-OT1-0)
-%%Title: (TeX-OT1-0 TeX OT1 0)
-%%Version: 1.000
-%%EndComments
-/CIDInit /ProcSet findresource begin
-12 dict begin
-begincmap
-/CIDSystemInfo
-<< /Registry (TeX)
-/Ordering (OT1)
-/Supplement 0
->> def
-/CMapName /TeX-OT1-0 def
-/CMapType 2 def
-1 begincodespacerange
-<00> <7F>
-endcodespacerange
-8 beginbfrange
-<00> <01> <0393>
-<09> <0A> <03A8>
-<23> <26> <0023>
-<28> <3B> <0028>
-<3F> <5B> <003F>
-<5D> <5E> <005D>
-<61> <7A> <0061>
-<7B> <7C> <2013>
-endbfrange
-40 beginbfchar
-<02> <0398>
-<03> <039B>
-<04> <039E>
-<05> <03A0>
-<06> <03A3>
-<07> <03D2>
-<08> <03A6>
-<0B> <00660066>
-<0C> <00660069>
-<0D> <0066006C>
-<0E> <006600660069>
-<0F> <00660066006C>
-<10> <0131>
-<11> <0237>
-<12> <0060>
-<13> <00B4>
-<14> <02C7>
-<15> <02D8>
-<16> <00AF>
-<17> <02DA>
-<18> <00B8>
-<19> <00DF>
-<1A> <00E6>
-<1B> <0153>
-<1C> <00F8>
-<1D> <00C6>
-<1E> <0152>
-<1F> <00D8>
-<21> <0021>
-<22> <201D>
-<27> <2019>
-<3C> <00A1>
-<3D> <003D>
-<3E> <00BF>
-<5C> <201C>
-<5F> <02D9>
-<60> <2018>
-<7D> <02DD>
-<7E> <007E>
-<7F> <00A8>
-endbfchar
-endcmap
-CMapName currentdict /CMap defineresource pop
-end
-end
-%%EndResource
-%%EOF
- }\endgroup
- \expandafter\edef\csname cmapOT1\endcsname#1{%
- \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
- }%
-%
-% \cmapOT1IT
- \begingroup
- \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
- \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
-%%DocumentNeededResources: ProcSet (CIDInit)
-%%IncludeResource: ProcSet (CIDInit)
-%%BeginResource: CMap (TeX-OT1IT-0)
-%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
-%%Version: 1.000
-%%EndComments
-/CIDInit /ProcSet findresource begin
-12 dict begin
-begincmap
-/CIDSystemInfo
-<< /Registry (TeX)
-/Ordering (OT1IT)
-/Supplement 0
->> def
-/CMapName /TeX-OT1IT-0 def
-/CMapType 2 def
-1 begincodespacerange
-<00> <7F>
-endcodespacerange
-8 beginbfrange
-<00> <01> <0393>
-<09> <0A> <03A8>
-<25> <26> <0025>
-<28> <3B> <0028>
-<3F> <5B> <003F>
-<5D> <5E> <005D>
-<61> <7A> <0061>
-<7B> <7C> <2013>
-endbfrange
-42 beginbfchar
-<02> <0398>
-<03> <039B>
-<04> <039E>
-<05> <03A0>
-<06> <03A3>
-<07> <03D2>
-<08> <03A6>
-<0B> <00660066>
-<0C> <00660069>
-<0D> <0066006C>
-<0E> <006600660069>
-<0F> <00660066006C>
-<10> <0131>
-<11> <0237>
-<12> <0060>
-<13> <00B4>
-<14> <02C7>
-<15> <02D8>
-<16> <00AF>
-<17> <02DA>
-<18> <00B8>
-<19> <00DF>
-<1A> <00E6>
-<1B> <0153>
-<1C> <00F8>
-<1D> <00C6>
-<1E> <0152>
-<1F> <00D8>
-<21> <0021>
-<22> <201D>
-<23> <0023>
-<24> <00A3>
-<27> <2019>
-<3C> <00A1>
-<3D> <003D>
-<3E> <00BF>
-<5C> <201C>
-<5F> <02D9>
-<60> <2018>
-<7D> <02DD>
-<7E> <007E>
-<7F> <00A8>
-endbfchar
-endcmap
-CMapName currentdict /CMap defineresource pop
-end
-end
-%%EndResource
-%%EOF
- }\endgroup
- \expandafter\edef\csname cmapOT1IT\endcsname#1{%
- \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
- }%
-%
-% \cmapOT1TT
- \begingroup
- \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
- \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
-%%DocumentNeededResources: ProcSet (CIDInit)
-%%IncludeResource: ProcSet (CIDInit)
-%%BeginResource: CMap (TeX-OT1TT-0)
-%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
-%%Version: 1.000
-%%EndComments
-/CIDInit /ProcSet findresource begin
-12 dict begin
-begincmap
-/CIDSystemInfo
-<< /Registry (TeX)
-/Ordering (OT1TT)
-/Supplement 0
->> def
-/CMapName /TeX-OT1TT-0 def
-/CMapType 2 def
-1 begincodespacerange
-<00> <7F>
-endcodespacerange
-5 beginbfrange
-<00> <01> <0393>
-<09> <0A> <03A8>
-<21> <26> <0021>
-<28> <5F> <0028>
-<61> <7E> <0061>
-endbfrange
-32 beginbfchar
-<02> <0398>
-<03> <039B>
-<04> <039E>
-<05> <03A0>
-<06> <03A3>
-<07> <03D2>
-<08> <03A6>
-<0B> <2191>
-<0C> <2193>
-<0D> <0027>
-<0E> <00A1>
-<0F> <00BF>
-<10> <0131>
-<11> <0237>
-<12> <0060>
-<13> <00B4>
-<14> <02C7>
-<15> <02D8>
-<16> <00AF>
-<17> <02DA>
-<18> <00B8>
-<19> <00DF>
-<1A> <00E6>
-<1B> <0153>
-<1C> <00F8>
-<1D> <00C6>
-<1E> <0152>
-<1F> <00D8>
-<20> <2423>
-<27> <2019>
-<60> <2018>
-<7F> <00A8>
-endbfchar
-endcmap
-CMapName currentdict /CMap defineresource pop
-end
-end
-%%EndResource
-%%EOF
- }\endgroup
- \expandafter\edef\csname cmapOT1TT\endcsname#1{%
- \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
- }%
-\fi\fi
-
-
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
-% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
-% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass
-% empty to omit).
-\def\setfont#1#2#3#4#5{%
- \font#1=\fontprefix#2#3 scaled #4
- \csname cmap#5\endcsname#1%
-}
-% This is what gets called when #5 of \setfont is empty.
-\let\cmap\gobble
-% emacs-page end of cmaps
-
-% Use cm as the default font prefix.
-% To specify the font prefix, you must define \fontprefix
-% before you read in texinfo.tex.
-\ifx\fontprefix\thisisundefined
-\def\fontprefix{cm}
-\fi
-% Support font families that don't use the same naming scheme as CM.
-\def\rmshape{r}
-\def\rmbshape{bx} %where the normal face is bold
-\def\bfshape{b}
-\def\bxshape{bx}
-\def\ttshape{tt}
-\def\ttbshape{tt}
-\def\ttslshape{sltt}
-\def\itshape{ti}
-\def\itbshape{bxti}
-\def\slshape{sl}
-\def\slbshape{bxsl}
-\def\sfshape{ss}
-\def\sfbshape{ss}
-\def\scshape{csc}
-\def\scbshape{csc}
-
-% Definitions for a main text size of 11pt. This is the default in
-% Texinfo.
-%
-\def\definetextfontsizexi{%
-% Text fonts (11.2pt, magstep1).
-\def\textnominalsize{11pt}
-\edef\mainmagstep{\magstephalf}
-\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
-\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
-\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
-\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
-\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
-\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
-\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-\def\textecsize{1095}
-
-% A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstep1}{OT1}
-\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
-\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
-
-% Fonts for indices, footnotes, small examples (9pt).
-\def\smallnominalsize{9pt}
-\setfont\smallrm\rmshape{9}{1000}{OT1}
-\setfont\smalltt\ttshape{9}{1000}{OT1TT}
-\setfont\smallbf\bfshape{10}{900}{OT1}
-\setfont\smallit\itshape{9}{1000}{OT1IT}
-\setfont\smallsl\slshape{9}{1000}{OT1}
-\setfont\smallsf\sfshape{9}{1000}{OT1}
-\setfont\smallsc\scshape{10}{900}{OT1}
-\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
-\def\smallecsize{0900}
-
-% Fonts for small examples (8pt).
-\def\smallernominalsize{8pt}
-\setfont\smallerrm\rmshape{8}{1000}{OT1}
-\setfont\smallertt\ttshape{8}{1000}{OT1TT}
-\setfont\smallerbf\bfshape{10}{800}{OT1}
-\setfont\smallerit\itshape{8}{1000}{OT1IT}
-\setfont\smallersl\slshape{8}{1000}{OT1}
-\setfont\smallersf\sfshape{8}{1000}{OT1}
-\setfont\smallersc\scshape{10}{800}{OT1}
-\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
-\font\smalleri=cmmi8
-\font\smallersy=cmsy8
-\def\smallerecsize{0800}
-
-% Fonts for title page (20.4pt):
-\def\titlenominalsize{20pt}
-\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
-\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
-\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
-\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
-\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
-\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\titleecsize{2074}
-
-% Chapter (and unnumbered) fonts (17.28pt).
-\def\chapnominalsize{17pt}
-\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
-\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
-\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
-\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
-\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
-\setfont\chapsf\sfbshape{17}{1000}{OT1}
-\let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
-\font\chapi=cmmi12 scaled \magstep2
-\font\chapsy=cmsy10 scaled \magstep3
-\def\chapecsize{1728}
-
-% Section fonts (14.4pt).
-\def\secnominalsize{14pt}
-\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
-\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
-\setfont\secsl\slbshape{10}{\magstep2}{OT1}
-\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
-\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
-\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}{OT1}
-\font\seci=cmmi12 scaled \magstep1
-\font\secsy=cmsy10 scaled \magstep2
-\def\sececsize{1440}
-
-% Subsection fonts (13.15pt).
-\def\ssecnominalsize{13pt}
-\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
-\setfont\ssecit\itbshape{10}{1315}{OT1IT}
-\setfont\ssecsl\slbshape{10}{1315}{OT1}
-\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
-\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1315}{OT1}
-\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled 1315
-\def\ssececsize{1200}
-
-% Reduced fonts for @acro in text (10pt).
-\def\reducednominalsize{10pt}
-\setfont\reducedrm\rmshape{10}{1000}{OT1}
-\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
-\setfont\reducedbf\bfshape{10}{1000}{OT1}
-\setfont\reducedit\itshape{10}{1000}{OT1IT}
-\setfont\reducedsl\slshape{10}{1000}{OT1}
-\setfont\reducedsf\sfshape{10}{1000}{OT1}
-\setfont\reducedsc\scshape{10}{1000}{OT1}
-\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
-\font\reducedi=cmmi10
-\font\reducedsy=cmsy10
-\def\reducedecsize{1000}
-
-\textleading = 13.2pt % line spacing for 11pt CM
-\textfonts % reset the current fonts
-\rm
-} % end of 11pt text font size definitions
-
-
-% Definitions to make the main text be 10pt Computer Modern, with
-% section, chapter, etc., sizes following suit. This is for the GNU
-% Press printing of the Emacs 22 manual. Maybe other manuals in the
-% future. Used with @smallbook, which sets the leading to 12pt.
-%
-\def\definetextfontsizex{%
-% Text fonts (10pt).
-\def\textnominalsize{10pt}
-\edef\mainmagstep{1000}
-\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
-\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
-\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
-\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
-\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
-\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
-\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-\def\textecsize{1000}
-
-% A few fonts for @defun names and args.
-\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
-\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
-\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
-
-% Fonts for indices, footnotes, small examples (9pt).
-\def\smallnominalsize{9pt}
-\setfont\smallrm\rmshape{9}{1000}{OT1}
-\setfont\smalltt\ttshape{9}{1000}{OT1TT}
-\setfont\smallbf\bfshape{10}{900}{OT1}
-\setfont\smallit\itshape{9}{1000}{OT1IT}
-\setfont\smallsl\slshape{9}{1000}{OT1}
-\setfont\smallsf\sfshape{9}{1000}{OT1}
-\setfont\smallsc\scshape{10}{900}{OT1}
-\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
-\def\smallecsize{0900}
-
-% Fonts for small examples (8pt).
-\def\smallernominalsize{8pt}
-\setfont\smallerrm\rmshape{8}{1000}{OT1}
-\setfont\smallertt\ttshape{8}{1000}{OT1TT}
-\setfont\smallerbf\bfshape{10}{800}{OT1}
-\setfont\smallerit\itshape{8}{1000}{OT1IT}
-\setfont\smallersl\slshape{8}{1000}{OT1}
-\setfont\smallersf\sfshape{8}{1000}{OT1}
-\setfont\smallersc\scshape{10}{800}{OT1}
-\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
-\font\smalleri=cmmi8
-\font\smallersy=cmsy8
-\def\smallerecsize{0800}
-
-% Fonts for title page (20.4pt):
-\def\titlenominalsize{20pt}
-\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
-\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
-\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
-\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
-\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
-\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\titleecsize{2074}
-
-% Chapter fonts (14.4pt).
-\def\chapnominalsize{14pt}
-\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
-\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
-\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
-\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
-\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
-\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
-\let\chapbf\chaprm
-\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
-\font\chapi=cmmi12 scaled \magstep1
-\font\chapsy=cmsy10 scaled \magstep2
-\def\chapecsize{1440}
-
-% Section fonts (12pt).
-\def\secnominalsize{12pt}
-\setfont\secrm\rmbshape{12}{1000}{OT1}
-\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
-\setfont\secsl\slbshape{10}{\magstep1}{OT1}
-\setfont\sectt\ttbshape{12}{1000}{OT1TT}
-\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
-\setfont\secsf\sfbshape{12}{1000}{OT1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep1}{OT1}
-\font\seci=cmmi12
-\font\secsy=cmsy10 scaled \magstep1
-\def\sececsize{1200}
-
-% Subsection fonts (10pt).
-\def\ssecnominalsize{10pt}
-\setfont\ssecrm\rmbshape{10}{1000}{OT1}
-\setfont\ssecit\itbshape{10}{1000}{OT1IT}
-\setfont\ssecsl\slbshape{10}{1000}{OT1}
-\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
-\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
-\setfont\ssecsf\sfbshape{10}{1000}{OT1}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{1000}{OT1}
-\font\sseci=cmmi10
-\font\ssecsy=cmsy10
-\def\ssececsize{1000}
-
-% Reduced fonts for @acro in text (9pt).
-\def\reducednominalsize{9pt}
-\setfont\reducedrm\rmshape{9}{1000}{OT1}
-\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
-\setfont\reducedbf\bfshape{10}{900}{OT1}
-\setfont\reducedit\itshape{9}{1000}{OT1IT}
-\setfont\reducedsl\slshape{9}{1000}{OT1}
-\setfont\reducedsf\sfshape{9}{1000}{OT1}
-\setfont\reducedsc\scshape{10}{900}{OT1}
-\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
-\font\reducedi=cmmi9
-\font\reducedsy=cmsy9
-\def\reducedecsize{0900}
-
-\divide\parskip by 2 % reduce space between paragraphs
-\textleading = 12pt % line spacing for 10pt CM
-\textfonts % reset the current fonts
-\rm
-} % end of 10pt text font size definitions
-
-
-% We provide the user-level command
-% @fonttextsize 10
-% (or 11) to redefine the text font size. pt is assumed.
-%
-\def\xiword{11}
-\def\xword{10}
-\def\xwordpt{10pt}
-%
-\parseargdef\fonttextsize{%
- \def\textsizearg{#1}%
- %\wlog{doing @fonttextsize \textsizearg}%
- %
- % Set \globaldefs so that documents can use this inside @tex, since
- % makeinfo 4.8 does not support it, but we need it nonetheless.
- %
- \begingroup \globaldefs=1
- \ifx\textsizearg\xword \definetextfontsizex
- \else \ifx\textsizearg\xiword \definetextfontsizexi
- \else
- \errhelp=\EMsimple
- \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
- \fi\fi
- \endgroup
-}
-
-
-% In order for the font changes to affect most math symbols and letters,
-% we have to define the \textfont of the standard families. Since
-% texinfo doesn't allow for producing subscripts and superscripts except
-% in the main text, we don't bother to reset \scriptfont and
-% \scriptscriptfont (which would also require loading a lot more fonts).
-%
-\def\resetmathfonts{%
- \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
- \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
- \textfont\ttfam=\tentt \textfont\sffam=\tensf
-}
-
-% The font-changing commands redefine the meanings of \tenSTYLE, instead
-% of just \STYLE. We do this because \STYLE needs to also set the
-% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire
-% \tenSTYLE to set the current font.
-%
-% Each font-changing command also sets the names \lsize (one size lower)
-% and \lllsize (three sizes lower). These relative commands are used in
-% the LaTeX logo and acronyms.
-%
-% This all needs generalizing, badly.
-%
-\def\textfonts{%
- \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
- \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
- \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
- \let\tenttsl=\textttsl
- \def\curfontsize{text}%
- \def\lsize{reduced}\def\lllsize{smaller}%
- \resetmathfonts \setleading{\textleading}}
-\def\titlefonts{%
- \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
- \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
- \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
- \let\tenttsl=\titlettsl
- \def\curfontsize{title}%
- \def\lsize{chap}\def\lllsize{subsec}%
- \resetmathfonts \setleading{27pt}}
-\def\titlefont#1{{\titlefonts\rmisbold #1}}
-\def\chapfonts{%
- \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
- \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
- \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
- \let\tenttsl=\chapttsl
- \def\curfontsize{chap}%
- \def\lsize{sec}\def\lllsize{text}%
- \resetmathfonts \setleading{19pt}}
-\def\secfonts{%
- \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
- \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
- \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
- \let\tenttsl=\secttsl
- \def\curfontsize{sec}%
- \def\lsize{subsec}\def\lllsize{reduced}%
- \resetmathfonts \setleading{16pt}}
-\def\subsecfonts{%
- \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
- \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
- \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
- \let\tenttsl=\ssecttsl
- \def\curfontsize{ssec}%
- \def\lsize{text}\def\lllsize{small}%
- \resetmathfonts \setleading{15pt}}
-\let\subsubsecfonts = \subsecfonts
-\def\reducedfonts{%
- \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
- \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
- \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
- \let\tenttsl=\reducedttsl
- \def\curfontsize{reduced}%
- \def\lsize{small}\def\lllsize{smaller}%
- \resetmathfonts \setleading{10.5pt}}
-\def\smallfonts{%
- \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
- \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
- \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
- \let\tenttsl=\smallttsl
- \def\curfontsize{small}%
- \def\lsize{smaller}\def\lllsize{smaller}%
- \resetmathfonts \setleading{10.5pt}}
-\def\smallerfonts{%
- \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
- \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
- \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
- \let\tenttsl=\smallerttsl
- \def\curfontsize{smaller}%
- \def\lsize{smaller}\def\lllsize{smaller}%
- \resetmathfonts \setleading{9.5pt}}
-
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}{OT1}
-\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12
-\setfont\shortcontsl\slshape{12}{1000}{OT1}
-\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
-
-% Define these just so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
-
-% Set the fonts to use with the @small... environments.
-\let\smallexamplefonts = \smallfonts
-
-% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
-% can fit this many characters:
-% 8.5x11=86 smallbook=72 a4=90 a5=69
-% If we use \scriptfonts (8pt), then we can fit this many characters:
-% 8.5x11=90+ smallbook=80 a4=90+ a5=77
-% For me, subjectively, the few extra characters that fit aren't worth
-% the additional smallness of 8pt. So I'm making the default 9pt.
-%
-% By the way, for comparison, here's what fits with @example (10pt):
-% 8.5x11=71 smallbook=60 a4=75 a5=58
-% --karl, 24jan03.
-
-% Set up the default fonts, so we can use them for creating boxes.
-%
-\definetextfontsizexi
-
-
-\message{markup,}
-
-% Check if we are currently using a typewriter font. Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-
-% Markup style infrastructure. \defmarkupstylesetup\INITMACRO will
-% define and register \INITMACRO to be called on markup style changes.
-% \INITMACRO can check \currentmarkupstyle for the innermost
-% style and the set of \ifmarkupSTYLE switches for all styles
-% currently in effect.
-\newif\ifmarkupvar
-\newif\ifmarkupsamp
-\newif\ifmarkupkey
-%\newif\ifmarkupfile % @file == @samp.
-%\newif\ifmarkupoption % @option == @samp.
-\newif\ifmarkupcode
-\newif\ifmarkupkbd
-%\newif\ifmarkupenv % @env == @code.
-%\newif\ifmarkupcommand % @command == @code.
-\newif\ifmarkuptex % @tex (and part of @math, for now).
-\newif\ifmarkupexample
-\newif\ifmarkupverb
-\newif\ifmarkupverbatim
-
-\let\currentmarkupstyle\empty
-
-\def\setupmarkupstyle#1{%
- \csname markup#1true\endcsname
- \def\currentmarkupstyle{#1}%
- \markupstylesetup
-}
-
-\let\markupstylesetup\empty
-
-\def\defmarkupstylesetup#1{%
- \expandafter\def\expandafter\markupstylesetup
- \expandafter{\markupstylesetup #1}%
- \def#1%
-}
-
-% Markup style setup for left and right quotes.
-\defmarkupstylesetup\markupsetuplq{%
- \expandafter\let\expandafter \temp
- \csname markupsetuplq\currentmarkupstyle\endcsname
- \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
-}
-
-\defmarkupstylesetup\markupsetuprq{%
- \expandafter\let\expandafter \temp
- \csname markupsetuprq\currentmarkupstyle\endcsname
- \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
-}
-
-{
-\catcode`\'=\active
-\catcode`\`=\active
-
-\gdef\markupsetuplqdefault{\let`\lq}
-\gdef\markupsetuprqdefault{\let'\rq}
-
-\gdef\markupsetcodequoteleft{\let`\codequoteleft}
-\gdef\markupsetcodequoteright{\let'\codequoteright}
-
-\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft}
-}
-
-\let\markupsetuplqcode \markupsetcodequoteleft
-\let\markupsetuprqcode \markupsetcodequoteright
-%
-\let\markupsetuplqexample \markupsetcodequoteleft
-\let\markupsetuprqexample \markupsetcodequoteright
-%
-\let\markupsetuplqsamp \markupsetcodequoteleft
-\let\markupsetuprqsamp \markupsetcodequoteright
-%
-\let\markupsetuplqverb \markupsetcodequoteleft
-\let\markupsetuprqverb \markupsetcodequoteright
-%
-\let\markupsetuplqverbatim \markupsetcodequoteleft
-\let\markupsetuprqverbatim \markupsetcodequoteright
-
-\let\markupsetuplqkbd \markupsetnoligaturesquoteleft
-
-% Allow an option to not use regular directed right quote/apostrophe
-% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
-% The undirected quote is ugly, so don't make it the default, but it
-% works for pasting with more pdf viewers (at least evince), the
-% lilypond developers report. xpdf does work with the regular 0x27.
-%
-\def\codequoteright{%
- \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
- \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
- '%
- \else \char'15 \fi
- \else \char'15 \fi
-}
-%
-% and a similar option for the left quote char vs. a grave accent.
-% Modern fonts display ASCII 0x60 as a grave accent, so some people like
-% the code environments to do likewise.
-%
-\def\codequoteleft{%
- \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
- \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
- % [Knuth] pp. 380,381,391
- % \relax disables Spanish ligatures ?` and !` of \tt font.
- \relax`%
- \else \char'22 \fi
- \else \char'22 \fi
-}
-
-% Commands to set the quote options.
-%
-\parseargdef\codequoteundirected{%
- \def\temp{#1}%
- \ifx\temp\onword
- \expandafter\let\csname SETtxicodequoteundirected\endcsname
- = t%
- \else\ifx\temp\offword
- \expandafter\let\csname SETtxicodequoteundirected\endcsname
- = \relax
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
- \fi\fi
-}
-%
-\parseargdef\codequotebacktick{%
- \def\temp{#1}%
- \ifx\temp\onword
- \expandafter\let\csname SETtxicodequotebacktick\endcsname
- = t%
- \else\ifx\temp\offword
- \expandafter\let\csname SETtxicodequotebacktick\endcsname
- = \relax
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
- \fi\fi
-}
-
-% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
-\def\noligaturesquoteleft{\relax\lq}
-
-% Count depth in font-changes, for error checks
-\newcount\fontdepth \fontdepth=0
-
-% Font commands.
-
-% #1 is the font command (\sl or \it), #2 is the text to slant.
-% If we are in a monospaced environment, however, 1) always use \ttsl,
-% and 2) do not add an italic correction.
-\def\dosmartslant#1#2{%
- \ifusingtt
- {{\ttsl #2}\let\next=\relax}%
- {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
- \next
-}
-\def\smartslanted{\dosmartslant\sl}
-\def\smartitalic{\dosmartslant\it}
-
-% Output an italic correction unless \next (presumed to be the following
-% character) is such as not to need one.
-\def\smartitaliccorrection{%
- \ifx\next,%
- \else\ifx\next-%
- \else\ifx\next.%
- \else\ptexslash
- \fi\fi\fi
- \aftersmartic
-}
-
-% like \smartslanted except unconditionally uses \ttsl, and no ic.
-% @var is set to this for defun arguments.
-\def\ttslanted#1{{\ttsl #1}}
-
-% @cite is like \smartslanted except unconditionally use \sl. We never want
-% ttsl for book titles, do we?
-\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
-
-\def\aftersmartic{}
-\def\var#1{%
- \let\saveaftersmartic = \aftersmartic
- \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}%
- \smartslanted{#1}%
-}
-
-\let\i=\smartitalic
-\let\slanted=\smartslanted
-\let\dfn=\smartslanted
-\let\emph=\smartitalic
-
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}} % roman font
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
-
-% @b, explicit bold. Also @strong.
-\def\b#1{{\bf #1}}
-\let\strong=\b
-
-% @sansserif, explicit sans.
-\def\sansserif#1{{\sf #1}}
-
-% We can't just use \exhyphenpenalty, because that only has effect at
-% the end of a paragraph. Restore normal hyphenation at the end of the
-% group within which \nohyphenation is presumably called.
-%
-\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
-\def\restorehyphenation{\hyphenchar\font = `- }
-
-% Set sfcode to normal for the chars that usually have another value.
-% Can't use plain's \frenchspacing because it uses the `\x notation, and
-% sometimes \x has an active definition that messes things up.
-%
-\catcode`@=11
- \def\plainfrenchspacing{%
- \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
- \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
- \def\endofsentencespacefactor{1000}% for @. and friends
- }
- \def\plainnonfrenchspacing{%
- \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
- \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
- \def\endofsentencespacefactor{3000}% for @. and friends
- }
-\catcode`@=\other
-\def\endofsentencespacefactor{3000}% default
-
-% @t, explicit typewriter.
-\def\t#1{%
- {\tt \rawbackslash \plainfrenchspacing #1}%
- \null
-}
-
-% @samp.
-\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
-
-% definition of @key that produces a lozenge. Doesn't adjust to text size.
-%\setfont\keyrm\rmshape{8}{1000}{OT1}
-%\font\keysy=cmsy9
-%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
-% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
-% \vbox{\hrule\kern-0.4pt
-% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
-% \kern-0.4pt\hrule}%
-% \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-
-% definition of @key with no lozenge. If the current font is already
-% monospace, don't change it; that way, we respect @kbdinputstyle. But
-% if it isn't monospace, then use \tt.
-%
-\def\key#1{{\setupmarkupstyle{key}%
- \nohyphenation
- \ifmonospace\else\tt\fi
- #1}\null}
-
-% ctrl is no longer a Texinfo command.
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
-% @file, @option are the same as @samp.
-\let\file=\samp
-\let\option=\samp
-
-% @code is a modification of @t,
-% which makes spaces the same size as normal in the surrounding text.
-\def\tclose#1{%
- {%
- % Change normal interword space to be same as for the current font.
- \spaceskip = \fontdimen2\font
- %
- % Switch to typewriter.
- \tt
- %
- % But `\ ' produces the large typewriter interword space.
- \def\ {{\spaceskip = 0pt{} }}%
- %
- % Turn off hyphenation.
- \nohyphenation
- %
- \rawbackslash
- \plainfrenchspacing
- #1%
- }%
- \null % reset spacefactor to 1000
-}
-
-% We *must* turn on hyphenation at `-' and `_' in @code.
-% Otherwise, it is too hard to avoid overfull hboxes
-% in the Emacs manual, the Library manual, etc.
-
-% Unfortunately, TeX uses one parameter (\hyphenchar) to control
-% both hyphenation at - and hyphenation within words.
-% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash.
-% -- rms.
-{
- \catcode`\-=\active \catcode`\_=\active
- \catcode`\'=\active \catcode`\`=\active
- \global\let'=\rq \global\let`=\lq % default definitions
- %
- \global\def\code{\begingroup
- \setupmarkupstyle{code}%
- % The following should really be moved into \setupmarkupstyle handlers.
- \catcode\dashChar=\active \catcode\underChar=\active
- \ifallowcodebreaks
- \let-\codedash
- \let_\codeunder
- \else
- \let-\realdash
- \let_\realunder
- \fi
- \codex
- }
-}
-
-\def\codex #1{\tclose{#1}\endgroup}
-
-\def\realdash{-}
-\def\codedash{-\discretionary{}{}{}}
-\def\codeunder{%
- % this is all so @math{@code{var_name}+1} can work. In math mode, _
- % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
- % will therefore expand the active definition of _, which is us
- % (inside @code that is), therefore an endless loop.
- \ifusingtt{\ifmmode
- \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
- \else\normalunderscore \fi
- \discretionary{}{}{}}%
- {\_}%
-}
-
-% An additional complication: the above will allow breaks after, e.g.,
-% each of the four underscores in __typeof__. This is undesirable in
-% some manuals, especially if they don't have long identifiers in
-% general. @allowcodebreaks provides a way to control this.
-%
-\newif\ifallowcodebreaks \allowcodebreakstrue
-
-\def\keywordtrue{true}
-\def\keywordfalse{false}
-
-\parseargdef\allowcodebreaks{%
- \def\txiarg{#1}%
- \ifx\txiarg\keywordtrue
- \allowcodebreakstrue
- \else\ifx\txiarg\keywordfalse
- \allowcodebreaksfalse
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
- \fi\fi
-}
-
-% @uref (abbreviation for `urlref') takes an optional (comma-separated)
-% second argument specifying the text to display and an optional third
-% arg as text to display instead of (rather than in addition to) the url
-% itself. First (mandatory) arg is the url.
-% (This \urefnobreak definition isn't used now, leaving it for a while
-% for comparison.)
-\def\urefnobreak#1{\dourefnobreak #1,,,\finish}
-\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup
- \unsepspaces
- \pdfurl{#1}%
- \setbox0 = \hbox{\ignorespaces #3}%
- \ifdim\wd0 > 0pt
- \unhbox0 % third arg given, show only that
- \else
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
- \else
- \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
- \fi
- \else
- \code{#1}% only url given, so show it
- \fi
- \fi
- \endlink
-\endgroup}
-
-% This \urefbreak definition is the active one.
-\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
-\let\uref=\urefbreak
-\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
-\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
- \unsepspaces
- \pdfurl{#1}%
- \setbox0 = \hbox{\ignorespaces #3}%
- \ifdim\wd0 > 0pt
- \unhbox0 % third arg given, show only that
- \else
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
- \else
- \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url
- \fi
- \else
- \urefcode{#1}% only url given, so show it
- \fi
- \fi
- \endlink
-\endgroup}
-
-% Allow line breaks around only a few characters (only).
-\def\urefcatcodes{%
- \catcode\ampChar=\active \catcode\dotChar=\active
- \catcode\hashChar=\active \catcode\questChar=\active
- \catcode\slashChar=\active
-}
-{
- \urefcatcodes
- %
- \global\def\urefcode{\begingroup
- \setupmarkupstyle{code}%
- \urefcatcodes
- \let&\urefcodeamp
- \let.\urefcodedot
- \let#\urefcodehash
- \let?\urefcodequest
- \let/\urefcodeslash
- \codex
- }
- %
- % By default, they are just regular characters.
- \global\def&{\normalamp}
- \global\def.{\normaldot}
- \global\def#{\normalhash}
- \global\def?{\normalquest}
- \global\def/{\normalslash}
-}
-
-% we put a little stretch before and after the breakable chars, to help
-% line breaking of long url's. The unequal skips make look better in
-% cmtt at least, especially for dots.
-\def\urefprestretch{\urefprebreak \hskip0pt plus.13em }
-\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em }
-%
-\def\urefcodeamp{\urefprestretch \&\urefpoststretch}
-\def\urefcodedot{\urefprestretch .\urefpoststretch}
-\def\urefcodehash{\urefprestretch \#\urefpoststretch}
-\def\urefcodequest{\urefprestretch ?\urefpoststretch}
-\def\urefcodeslash{\futurelet\next\urefcodeslashfinish}
-{
- \catcode`\/=\active
- \global\def\urefcodeslashfinish{%
- \urefprestretch \slashChar
- % Allow line break only after the final / in a sequence of
- % slashes, to avoid line break between the slashes in http://.
- \ifx\next/\else \urefpoststretch \fi
- }
-}
-
-% One more complication: by default we'll break after the special
-% characters, but some people like to break before the special chars, so
-% allow that. Also allow no breaking at all, for manual control.
-%
-\parseargdef\urefbreakstyle{%
- \def\txiarg{#1}%
- \ifx\txiarg\wordnone
- \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak}
- \else\ifx\txiarg\wordbefore
- \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak}
- \else\ifx\txiarg\wordafter
- \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak}
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @urefbreakstyle setting `\txiarg'}%
- \fi\fi\fi
-}
-\def\wordafter{after}
-\def\wordbefore{before}
-\def\wordnone{none}
-
-\urefbreakstyle after
-
-% @url synonym for @uref, since that's how everyone uses it.
-%
-\let\url=\uref
-
-% rms does not like angle brackets --karl, 17may97.
-% So now @email is just like @uref, unless we are pdf.
-%
-%\def\email#1{\angleleft{\tt #1}\angleright}
-\ifpdf
- \def\email#1{\doemail#1,,\finish}
- \def\doemail#1,#2,#3\finish{\begingroup
- \unsepspaces
- \pdfurl{mailto:#1}%
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
- \endlink
- \endgroup}
-\else
- \let\email=\uref
-\fi
-
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}}
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-% `example' (@kbd uses ttsl only inside of @example and friends),
-% or `code' (@kbd uses normal tty font always).
-\parseargdef\kbdinputstyle{%
- \def\txiarg{#1}%
- \ifx\txiarg\worddistinct
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
- \else\ifx\txiarg\wordexample
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
- \else\ifx\txiarg\wordcode
- \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @kbdinputstyle setting `\txiarg'}%
- \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is `distinct'.
-\kbdinputstyle distinct
-
-\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
-\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi}
-
-% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
-\let\indicateurl=\code
-\let\env=\code
-\let\command=\code
-
-% @clicksequence{File @click{} Open ...}
-\def\clicksequence#1{\begingroup #1\endgroup}
-
-% @clickstyle @arrow (by default)
-\parseargdef\clickstyle{\def\click{#1}}
-\def\click{\arrow}
-
-% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
-%
-\def\dmn#1{\thinspace #1}
-
-% @l was never documented to mean ``switch to the Lisp font'',
-% and it is not used as such in any manual I can find. We need it for
-% Polish suppressed-l. --karl, 22sep96.
-%\def\l#1{{\li #1}\null}
-
-% @acronym for "FBI", "NATO", and the like.
-% We print this one point size smaller, since it's intended for
-% all-uppercase.
-%
-\def\acronym#1{\doacronym #1,,\finish}
-\def\doacronym#1,#2,#3\finish{%
- {\selectfonts\lsize #1}%
- \def\temp{#2}%
- \ifx\temp\empty \else
- \space ({\unsepspaces \ignorespaces \temp \unskip})%
- \fi
- \null % reset \spacefactor=1000
-}
-
-% @abbr for "Comput. J." and the like.
-% No font change, but don't do end-of-sentence spacing.
-%
-\def\abbr#1{\doabbr #1,,\finish}
-\def\doabbr#1,#2,#3\finish{%
- {\plainfrenchspacing #1}%
- \def\temp{#2}%
- \ifx\temp\empty \else
- \space ({\unsepspaces \ignorespaces \temp \unskip})%
- \fi
- \null % reset \spacefactor=1000
-}
-
-% @asis just yields its argument. Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math outputs its argument in math mode.
-%
-% One complication: _ usually means subscripts, but it could also mean
-% an actual _ character, as in @math{@var{some_variable} + 1}. So make
-% _ active, and distinguish by seeing if the current family is \slfam,
-% which is what @var uses.
-{
- \catcode`\_ = \active
- \gdef\mathunderscore{%
- \catcode`\_=\active
- \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
- }
-}
-% Another complication: we want \\ (and @\) to output a math (or tt) \.
-% FYI, plain.tex uses \\ as a temporary control sequence (for no
-% particular reason), but this is not advertised and we don't care.
-%
-% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
-\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
-%
-\def\math{%
- \tex
- \mathunderscore
- \let\\ = \mathbackslash
- \mathactive
- % make the texinfo accent commands work in math mode
- \let\"=\ddot
- \let\'=\acute
- \let\==\bar
- \let\^=\hat
- \let\`=\grave
- \let\u=\breve
- \let\v=\check
- \let\~=\tilde
- \let\dotaccent=\dot
- $\finishmath
-}
-\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex.
-
-% Some active characters (such as <) are spaced differently in math.
-% We have to reset their definitions in case the @math was an argument
-% to a command which sets the catcodes (such as @item or @section).
-%
-{
- \catcode`^ = \active
- \catcode`< = \active
- \catcode`> = \active
- \catcode`+ = \active
- \catcode`' = \active
- \gdef\mathactive{%
- \let^ = \ptexhat
- \let< = \ptexless
- \let> = \ptexgtr
- \let+ = \ptexplus
- \let' = \ptexquoteright
- }
-}
-
-% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
-% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
-% except specified as a normal braced arg, so no newlines to worry about.
-%
-\def\outfmtnametex{tex}
-%
-\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
-\long\def\doinlinefmt#1,#2,\finish{%
- \def\inlinefmtname{#1}%
- \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
-}
-% For raw, must switch into @tex before parsing the argument, to avoid
-% setting catcodes prematurely. Doing it this way means that, for
-% example, @inlineraw{html, foo{bar} gets a parse error instead of being
-% ignored. But this isn't important because if people want a literal
-% *right* brace they would have to use a command anyway, so they may as
-% well use a command to get a left brace too. We could re-use the
-% delimiter character idea from \verb, but it seems like overkill.
-%
-\long\def\inlineraw{\tex \doinlineraw}
-\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
-\def\doinlinerawtwo#1,#2,\finish{%
- \def\inlinerawname{#1}%
- \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
- \endgroup % close group opened by \tex.
-}
-
-
-\message{glyphs,}
-% and logos.
-
-% @@ prints an @, as does @atchar{}.
-\def\@{\char64 }
-\let\atchar=\@
-
-% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
-% Unless we're in typewriter, use \ecfont because the CM text fonts do
-% not have braces, and we don't want to switch into math.
-\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}}
-\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}}
-\let\{=\mylbrace \let\lbracechar=\{
-\let\}=\myrbrace \let\rbracechar=\}
-\begingroup
- % Definitions to produce \{ and \} commands for indices,
- % and @{ and @} for the aux/toc files.
- \catcode`\{ = \other \catcode`\} = \other
- \catcode`\[ = 1 \catcode`\] = 2
- \catcode`\! = 0 \catcode`\\ = \other
- !gdef!lbracecmd[\{]%
- !gdef!rbracecmd[\}]%
- !gdef!lbraceatcmd[@{]%
- !gdef!rbraceatcmd[@}]%
-!endgroup
-
-% @comma{} to avoid , parsing problems.
-\let\comma = ,
-
-% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
-% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
-\let\, = \ptexc
-\let\dotaccent = \ptexdot
-\def\ringaccent#1{{\accent23 #1}}
-\let\tieaccent = \ptext
-\let\ubaraccent = \ptexb
-\let\udotaccent = \d
-
-% Other special characters: @questiondown @exclamdown @ordf @ordm
-% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
-\def\questiondown{?`}
-\def\exclamdown{!`}
-\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
-\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
-
-% Dotless i and dotless j, used for accents.
-\def\imacro{i}
-\def\jmacro{j}
-\def\dotless#1{%
- \def\temp{#1}%
- \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
- \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
- \else \errmessage{@dotless can be used only with i or j}%
- \fi\fi
-}
-
-% The \TeX{} logo, as in plain, but resetting the spacing so that a
-% period following counts as ending a sentence. (Idea found in latex.)
-%
-\edef\TeX{\TeX \spacefactor=1000 }
-
-% @LaTeX{} logo. Not quite the same results as the definition in
-% latex.ltx, since we use a different font for the raised A; it's most
-% convenient for us to use an explicitly smaller font, rather than using
-% the \scriptstyle font (since we don't reset \scriptstyle and
-% \scriptscriptstyle).
-%
-\def\LaTeX{%
- L\kern-.36em
- {\setbox0=\hbox{T}%
- \vbox to \ht0{\hbox{%
- \ifx\textnominalsize\xwordpt
- % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX.
- % Revert to plain's \scriptsize, which is 7pt.
- \count255=\the\fam $\fam\count255 \scriptstyle A$%
- \else
- % For 11pt, we can use our lllsize.
- \selectfonts\lllsize A%
- \fi
- }%
- \vss
- }}%
- \kern-.15em
- \TeX
-}
-
-% Some math mode symbols.
-\def\bullet{$\ptexbullet$}
-\def\geq{\ifmmode \ge\else $\ge$\fi}
-\def\leq{\ifmmode \le\else $\le$\fi}
-\def\minus{\ifmmode -\else $-$\fi}
-
-% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in the cm
-% typewriter fonts as three actual period characters; on the other hand,
-% in other typewriter fonts three periods are wider than 1.5em. So do
-% whichever is larger.
-%
-\def\dots{%
- \leavevmode
- \setbox0=\hbox{...}% get width of three periods
- \ifdim\wd0 > 1.5em
- \dimen0 = \wd0
- \else
- \dimen0 = 1.5em
- \fi
- \hbox to \dimen0{%
- \hskip 0pt plus.25fil
- .\hskip 0pt plus1fil
- .\hskip 0pt plus1fil
- .\hskip 0pt plus.5fil
- }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
- \dots
- \spacefactor=\endofsentencespacefactor
-}
-
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
-% Since these characters are used in examples, they should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-%
-\def\point{$\star$}
-\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
-\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% The @error{} command.
-% Adapted from the TeXbook's \boxit.
-%
-\newbox\errorbox
-%
-{\tentt \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt}
-%
-\setbox\errorbox=\hbox to \dimen0{\hfil
- \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
- \advance\hsize by -2\dimen2 % Rules.
- \vbox{%
- \hrule height\dimen2
- \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
- \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
- \kern3pt\vrule width\dimen2}% Space to right.
- \hrule height\dimen2}
- \hfil}
-%
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
-% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
-%
-\def\pounds{{\it\$}}
-
-% @euro{} comes from a separate font, depending on the current style.
-% We use the free feym* fonts from the eurosym package by Henrik
-% Theiling, which support regular, slanted, bold and bold slanted (and
-% "outlined" (blackboard board, sort of) versions, which we don't need).
-% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
-%
-% Although only regular is the truly official Euro symbol, we ignore
-% that. The Euro is designed to be slightly taller than the regular
-% font height.
-%
-% feymr - regular
-% feymo - slanted
-% feybr - bold
-% feybo - bold slanted
-%
-% There is no good (free) typewriter version, to my knowledge.
-% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
-% Hmm.
-%
-% Also doesn't work in math. Do we need to do math with euro symbols?
-% Hope not.
-%
-%
-\def\euro{{\eurofont e}}
-\def\eurofont{%
- % We set the font at each command, rather than predefining it in
- % \textfonts and the other font-switching commands, so that
- % installations which never need the symbol don't have to have the
- % font installed.
- %
- % There is only one designed size (nominal 10pt), so we always scale
- % that to the current nominal size.
- %
- % By the way, simply using "at 1em" works for cmr10 and the like, but
- % does not work for cmbx10 and other extended/shrunken fonts.
- %
- \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
- %
- \ifx\curfontstyle\bfstylename
- % bold:
- \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
- \else
- % regular:
- \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
- \fi
- \thiseurofont
-}
-
-% Glyphs from the EC fonts. We don't use \let for the aliases, because
-% sometimes we redefine the original macro, and the alias should reflect
-% the redefinition.
-%
-% Use LaTeX names for the Icelandic letters.
-\def\DH{{\ecfont \char"D0}} % Eth
-\def\dh{{\ecfont \char"F0}} % eth
-\def\TH{{\ecfont \char"DE}} % Thorn
-\def\th{{\ecfont \char"FE}} % thorn
-%
-\def\guillemetleft{{\ecfont \char"13}}
-\def\guillemotleft{\guillemetleft}
-\def\guillemetright{{\ecfont \char"14}}
-\def\guillemotright{\guillemetright}
-\def\guilsinglleft{{\ecfont \char"0E}}
-\def\guilsinglright{{\ecfont \char"0F}}
-\def\quotedblbase{{\ecfont \char"12}}
-\def\quotesinglbase{{\ecfont \char"0D}}
-%
-% This positioning is not perfect (see the ogonek LaTeX package), but
-% we have the precomposed glyphs for the most common cases. We put the
-% tests to use those glyphs in the single \ogonek macro so we have fewer
-% dummy definitions to worry about for index entries, etc.
-%
-% ogonek is also used with other letters in Lithuanian (IOU), but using
-% the precomposed glyphs for those is not so easy since they aren't in
-% the same EC font.
-\def\ogonek#1{{%
- \def\temp{#1}%
- \ifx\temp\macrocharA\Aogonek
- \else\ifx\temp\macrochara\aogonek
- \else\ifx\temp\macrocharE\Eogonek
- \else\ifx\temp\macrochare\eogonek
- \else
- \ecfont \setbox0=\hbox{#1}%
- \ifdim\ht0=1ex\accent"0C #1%
- \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
- \fi
- \fi\fi\fi\fi
- }%
-}
-\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
-\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
-\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
-\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
-%
-% Use the ec* fonts (cm-super in outline format) for non-CM glyphs.
-\def\ecfont{%
- % We can't distinguish serif/sans and italic/slanted, but this
- % is used for crude hacks anyway (like adding French and German
- % quotes to documents typeset with CM, where we lose kerning), so
- % hopefully nobody will notice/care.
- \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
- \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
- \ifx\curfontstyle\bfstylename
- % bold:
- \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
- \else
- % regular:
- \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
- \fi
- \thisecfont
-}
-
-% @registeredsymbol - R in a circle. The font for the R should really
-% be smaller yet, but lllsize is the best we can do for now.
-% Adapted from the plain.tex definition of \copyright.
-%
-\def\registeredsymbol{%
- $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
- \hfil\crcr\Orb}}%
- }$%
-}
-
-% @textdegree - the normal degrees sign.
-%
-\def\textdegree{$^\circ$}
-
-% Laurent Siebenmann reports \Orb undefined with:
-% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
-% so we'll define it if necessary.
-%
-\ifx\Orb\thisisundefined
-\def\Orb{\mathhexbox20D}
-\fi
-
-% Quotes.
-\chardef\quotedblleft="5C
-\chardef\quotedblright=`\"
-\chardef\quoteleft=`\`
-\chardef\quoteright=`\'
-
-
-\message{page headings,}
-
-\newskip\titlepagetopglue \titlepagetopglue = 1.5in
-\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
-
-% First the title page. Must do @settitle before @titlepage.
-\newif\ifseenauthor
-\newif\iffinishedtitlepage
-
-% Do an implicit @contents or @shortcontents after @end titlepage if the
-% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
-%
-\newif\ifsetcontentsaftertitlepage
- \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
-\newif\ifsetshortcontentsaftertitlepage
- \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
-
-\parseargdef\shorttitlepage{%
- \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
- \endgroup\page\hbox{}\page}
-
-\envdef\titlepage{%
- % Open one extra group, as we want to close it in the middle of \Etitlepage.
- \begingroup
- \parindent=0pt \textfonts
- % Leave some space at the very top of the page.
- \vglue\titlepagetopglue
- % No rule at page bottom unless we print one at the top with @title.
- \finishedtitlepagetrue
- %
- % Most title ``pages'' are actually two pages long, with space
- % at the top of the second. We don't want the ragged left on the second.
- \let\oldpage = \page
- \def\page{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- \let\page = \oldpage
- \page
- \null
- }%
-}
-
-\def\Etitlepage{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- % It is important to do the page break before ending the group,
- % because the headline and footline are only empty inside the group.
- % If we use the new definition of \page, we always get a blank page
- % after the title page, which we certainly don't want.
- \oldpage
- \endgroup
- %
- % Need this before the \...aftertitlepage checks so that if they are
- % in effect the toc pages will come out with page numbers.
- \HEADINGSon
- %
- % If they want short, they certainly want long too.
- \ifsetshortcontentsaftertitlepage
- \shortcontents
- \contents
- \global\let\shortcontents = \relax
- \global\let\contents = \relax
- \fi
- %
- \ifsetcontentsaftertitlepage
- \contents
- \global\let\contents = \relax
- \global\let\shortcontents = \relax
- \fi
-}
-
-\def\finishtitlepage{%
- \vskip4pt \hrule height 2pt width \hsize
- \vskip\titlepagebottomglue
- \finishedtitlepagetrue
-}
-
-% Macros to be used within @titlepage:
-
-\let\subtitlerm=\tenrm
-\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
-
-\parseargdef\title{%
- \checkenv\titlepage
- \leftline{\titlefonts\rmisbold #1}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt width \hsize \vskip4pt
-}
-
-\parseargdef\subtitle{%
- \checkenv\titlepage
- {\subtitlefont \rightline{#1}}%
-}
-
-% @author should come last, but may come many times.
-% It can also be used inside @quotation.
-%
-\parseargdef\author{%
- \def\temp{\quotation}%
- \ifx\thisenv\temp
- \def\quotationauthor{#1}% printed in \Equotation.
- \else
- \checkenv\titlepage
- \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
- {\secfonts\rmisbold \leftline{#1}}%
- \fi
-}
-
-
-% Set up page headings and footings.
-
-\let\thispage=\folio
-
-\newtoks\evenheadline % headline on even pages
-\newtoks\oddheadline % headline on odd pages
-\newtoks\evenfootline % footline on even pages
-\newtoks\oddfootline % footline on odd pages
-
-% Now make TeX use those variables
-\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
- \else \the\evenheadline \fi}}
-\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
- \else \the\evenfootline \fi}\HEADINGShook}
-\let\HEADINGShook=\relax
-
-% Commands to set those variables.
-% For example, this is what @headings on does
-% @evenheading @thistitle|@thispage|@thischapter
-% @oddheading @thischapter|@thispage|@thistitle
-% @evenfooting @thisfile||
-% @oddfooting ||@thisfile
-
-
-\def\evenheading{\parsearg\evenheadingxxx}
-\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
-\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
-\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
-
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
-\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
-\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
- \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
- %
- % Leave some space for the footline. Hopefully ok to assume
- % @evenfooting will not be used by itself.
- \global\advance\pageheight by -12pt
- \global\advance\vsize by -12pt
-}
-
-\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-
-% @evenheadingmarks top \thischapter <- chapter at the top of a page
-% @evenheadingmarks bottom \thischapter <- chapter at the bottom of a page
-%
-% The same set of arguments for:
-%
-% @oddheadingmarks
-% @evenfootingmarks
-% @oddfootingmarks
-% @everyheadingmarks
-% @everyfootingmarks
-
-\def\evenheadingmarks{\headingmarks{even}{heading}}
-\def\oddheadingmarks{\headingmarks{odd}{heading}}
-\def\evenfootingmarks{\headingmarks{even}{footing}}
-\def\oddfootingmarks{\headingmarks{odd}{footing}}
-\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1}
- \headingmarks{odd}{heading}{#1} }
-\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1}
- \headingmarks{odd}{footing}{#1} }
-% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
-\def\headingmarks#1#2#3 {%
- \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
- \global\expandafter\let\csname get#1#2marks\endcsname \temp
-}
-
-\everyheadingmarks bottom
-\everyfootingmarks bottom
-
-% @headings double turns headings on for double-sided printing.
-% @headings single turns headings on for single-sided printing.
-% @headings off turns them off.
-% @headings on same as @headings double, retained for compatibility.
-% @headings after turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
-% @headings singleafter turns on single-sided headings after this page.
-% By default, they are off at the start of a document,
-% and turned `on' after @end titlepage.
-
-\def\headings #1 {\csname HEADINGS#1\endcsname}
-
-\def\headingsoff{% non-global headings elimination
- \evenheadline={\hfil}\evenfootline={\hfil}%
- \oddheadline={\hfil}\oddfootline={\hfil}%
-}
-
-\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
-\HEADINGSoff % it's the default
-
-% When we turn headings on, set the page number to 1.
-% For double-sided printing, put current file name in lower left corner,
-% chapter name on inside top of right hand pages, document
-% title on inside top of left hand pages, and page numbers on outside top
-% edge of all pages.
-\def\HEADINGSdouble{%
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-\let\contentsalignmacro = \chappager
-
-% For single-sided printing, chapter title goes across top left of page,
-% page number on top right.
-\def\HEADINGSsingle{%
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-\def\HEADINGSon{\HEADINGSdouble}
-
-\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
-\let\HEADINGSdoubleafter=\HEADINGSafter
-\def\HEADINGSdoublex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-
-\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
-\def\HEADINGSsinglex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-
-% Subroutines used in generating headings
-% This produces Day Month Year style of output.
-% Only define if not already defined, in case a txi-??.tex file has set
-% up a different format (e.g., txi-cs.tex does this).
-\ifx\today\thisisundefined
-\def\today{%
- \number\day\space
- \ifcase\month
- \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
- \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
- \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
- \fi
- \space\number\year}
-\fi
-
-% @settitle line... specifies the title of the document, for headings.
-% It generates no output of its own.
-\def\thistitle{\putwordNoTitle}
-\def\settitle{\parsearg{\gdef\thistitle}}
-
-
-\message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x).
-
-% default indentation of table text
-\newdimen\tableindent \tableindent=.8in
-% default indentation of @itemize and @enumerate text
-\newdimen\itemindent \itemindent=.3in
-% margin between end of table item and start of table text.
-\newdimen\itemmargin \itemmargin=.1in
-
-% used internally for \itemindent minus \itemmargin
-\newdimen\itemmax
-
-% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
-% these defs.
-% They also define \itemindex
-% to index the item name in whatever manner is desired (perhaps none).
-
-\newif\ifitemxneedsnegativevskip
-
-\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
-
-\def\internalBitem{\smallbreak \parsearg\itemzzz}
-\def\internalBitemx{\itemxpar \parsearg\itemzzz}
-
-\def\itemzzz #1{\begingroup %
- \advance\hsize by -\rightskip
- \advance\hsize by -\tableindent
- \setbox0=\hbox{\itemindicate{#1}}%
- \itemindex{#1}%
- \nobreak % This prevents a break before @itemx.
- %
- % If the item text does not fit in the space we have, put it on a line
- % by itself, and do not allow a page break either before or after that
- % line. We do not start a paragraph here because then if the next
- % command is, e.g., @kindex, the whatsit would get put into the
- % horizontal list on a line by itself, resulting in extra blank space.
- \ifdim \wd0>\itemmax
- %
- % Make this a paragraph so we get the \parskip glue and wrapping,
- % but leave it ragged-right.
- \begingroup
- \advance\leftskip by-\tableindent
- \advance\hsize by\tableindent
- \advance\rightskip by0pt plus1fil\relax
- \leavevmode\unhbox0\par
- \endgroup
- %
- % We're going to be starting a paragraph, but we don't want the
- % \parskip glue -- logically it's part of the @item we just started.
- \nobreak \vskip-\parskip
- %
- % Stop a page break at the \parskip glue coming up. However, if
- % what follows is an environment such as @example, there will be no
- % \parskip glue; then the negative vskip we just inserted would
- % cause the example and the item to crash together. So we use this
- % bizarre value of 10001 as a signal to \aboveenvbreak to insert
- % \parskip glue after all. Section titles are handled this way also.
- %
- \penalty 10001
- \endgroup
- \itemxneedsnegativevskipfalse
- \else
- % The item text fits into the space. Start a paragraph, so that the
- % following text (if any) will end up on the same line.
- \noindent
- % Do this with kerns and \unhbox so that if there is a footnote in
- % the item text, it can migrate to the main vertical list and
- % eventually be printed.
- \nobreak\kern-\tableindent
- \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
- \unhbox0
- \nobreak\kern\dimen0
- \endgroup
- \itemxneedsnegativevskiptrue
- \fi
-}
-
-\def\item{\errmessage{@item while not in a list environment}}
-\def\itemx{\errmessage{@itemx while not in a list environment}}
-
-% @table, @ftable, @vtable.
-\envdef\table{%
- \let\itemindex\gobble
- \tablecheck{table}%
-}
-\envdef\ftable{%
- \def\itemindex ##1{\doind {fn}{\code{##1}}}%
- \tablecheck{ftable}%
-}
-\envdef\vtable{%
- \def\itemindex ##1{\doind {vr}{\code{##1}}}%
- \tablecheck{vtable}%
-}
-\def\tablecheck#1{%
- \ifnum \the\catcode`\^^M=\active
- \endgroup
- \errmessage{This command won't work in this context; perhaps the problem is
- that we are \inenvironment\thisenv}%
- \def\next{\doignore{#1}}%
- \else
- \let\next\tablex
- \fi
- \next
-}
-\def\tablex#1{%
- \def\itemindicate{#1}%
- \parsearg\tabley
-}
-\def\tabley#1{%
- {%
- \makevalueexpandable
- \edef\temp{\noexpand\tablez #1\space\space\space}%
- \expandafter
- }\temp \endtablez
-}
-\def\tablez #1 #2 #3 #4\endtablez{%
- \aboveenvbreak
- \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
- \ifnum 0#2>0 \tableindent=#2\mil \fi
- \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
- \itemmax=\tableindent
- \advance \itemmax by -\itemmargin
- \advance \leftskip by \tableindent
- \exdentamount=\tableindent
- \parindent = 0pt
- \parskip = \smallskipamount
- \ifdim \parskip=0pt \parskip=2pt \fi
- \let\item = \internalBitem
- \let\itemx = \internalBitemx
-}
-\def\Etable{\endgraf\afterenvbreak}
-\let\Eftable\Etable
-\let\Evtable\Etable
-\let\Eitemize\Etable
-\let\Eenumerate\Etable
-
-% This is the counter used by @enumerate, which is really @itemize
-
-\newcount \itemno
-
-\envdef\itemize{\parsearg\doitemize}
-
-\def\doitemize#1{%
- \aboveenvbreak
- \itemmax=\itemindent
- \advance\itemmax by -\itemmargin
- \advance\leftskip by \itemindent
- \exdentamount=\itemindent
- \parindent=0pt
- \parskip=\smallskipamount
- \ifdim\parskip=0pt \parskip=2pt \fi
- %
- % Try typesetting the item mark that if the document erroneously says
- % something like @itemize @samp (intending @table), there's an error
- % right away at the @itemize. It's not the best error message in the
- % world, but it's better than leaving it to the @item. This means if
- % the user wants an empty mark, they have to say @w{} not just @w.
- \def\itemcontents{#1}%
- \setbox0 = \hbox{\itemcontents}%
- %
- % @itemize with no arg is equivalent to @itemize @bullet.
- \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
- %
- \let\item=\itemizeitem
-}
-
-% Definition of @item while inside @itemize and @enumerate.
-%
-\def\itemizeitem{%
- \advance\itemno by 1 % for enumerations
- {\let\par=\endgraf \smallbreak}% reasonable place to break
- {%
- % If the document has an @itemize directly after a section title, a
- % \nobreak will be last on the list, and \sectionheading will have
- % done a \vskip-\parskip. In that case, we don't want to zero
- % parskip, or the item text will crash with the heading. On the
- % other hand, when there is normal text preceding the item (as there
- % usually is), we do want to zero parskip, or there would be too much
- % space. In that case, we won't have a \nobreak before. At least
- % that's the theory.
- \ifnum\lastpenalty<10000 \parskip=0in \fi
- \noindent
- \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
- %
- \vadjust{\penalty 1200}}% not good to break after first line of item.
- \flushcr
-}
-
-% \splitoff TOKENS\endmark defines \first to be the first token in
-% TOKENS, and \rest to be the remainder.
-%
-\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
-
-% Allow an optional argument of an uppercase letter, lowercase letter,
-% or number, to specify the first label in the enumerated list. No
-% argument is the same as `1'.
-%
-\envparseargdef\enumerate{\enumeratey #1 \endenumeratey}
-\def\enumeratey #1 #2\endenumeratey{%
- % If we were given no argument, pretend we were given `1'.
- \def\thearg{#1}%
- \ifx\thearg\empty \def\thearg{1}\fi
- %
- % Detect if the argument is a single token. If so, it might be a
- % letter. Otherwise, the only valid thing it can be is a number.
- % (We will always have one token, because of the test we just made.
- % This is a good thing, since \splitoff doesn't work given nothing at
- % all -- the first parameter is undelimited.)
- \expandafter\splitoff\thearg\endmark
- \ifx\rest\empty
- % Only one token in the argument. It could still be anything.
- % A ``lowercase letter'' is one whose \lccode is nonzero.
- % An ``uppercase letter'' is one whose \lccode is both nonzero, and
- % not equal to itself.
- % Otherwise, we assume it's a number.
- %
- % We need the \relax at the end of the \ifnum lines to stop TeX from
- % continuing to look for a <number>.
- %
- \ifnum\lccode\expandafter`\thearg=0\relax
- \numericenumerate % a number (we hope)
- \else
- % It's a letter.
- \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
- \lowercaseenumerate % lowercase letter
- \else
- \uppercaseenumerate % uppercase letter
- \fi
- \fi
- \else
- % Multiple tokens in the argument. We hope it's a number.
- \numericenumerate
- \fi
-}
-
-% An @enumerate whose labels are integers. The starting integer is
-% given in \thearg.
-%
-\def\numericenumerate{%
- \itemno = \thearg
- \startenumeration{\the\itemno}%
-}
-
-% The starting (lowercase) letter is in \thearg.
-\def\lowercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more lowercase letters in @enumerate; get a bigger
- alphabet}%
- \fi
- \char\lccode\itemno
- }%
-}
-
-% The starting (uppercase) letter is in \thearg.
-\def\uppercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more uppercase letters in @enumerate; get a bigger
- alphabet}
- \fi
- \char\uccode\itemno
- }%
-}
-
-% Call \doitemize, adding a period to the first argument and supplying the
-% common last two arguments. Also subtract one from the initial value in
-% \itemno, since @item increments \itemno.
-%
-\def\startenumeration#1{%
- \advance\itemno by -1
- \doitemize{#1.}\flushcr
-}
-
-% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
-% to @enumerate.
-%
-\def\alphaenumerate{\enumerate{a}}
-\def\capsenumerate{\enumerate{A}}
-\def\Ealphaenumerate{\Eenumerate}
-\def\Ecapsenumerate{\Eenumerate}
-
-
-% @multitable macros
-% Amy Hendrickson, 8/18/94, 3/6/96
-%
-% @multitable ... @end multitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble. Width
-% can be specified either with sample text given in a template line,
-% or in percent of \hsize, the current width of text on page.
-
-% Table can continue over pages but will only break between lines.
-
-% To make preamble:
-%
-% Either define widths of columns in terms of percent of \hsize:
-% @multitable @columnfractions .25 .3 .45
-% @item ...
-%
-% Numbers following @columnfractions are the percent of the total
-% current hsize to be used for each column. You may use as many
-% columns as desired.
-
-
-% Or use a template:
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item ...
-% using the widest term desired in each column.
-
-% Each new table line starts with @item, each subsequent new column
-% starts with @tab. Empty columns may be produced by supplying @tab's
-% with nothing between them for as many times as empty columns are needed,
-% ie, @tab@tab@tab will produce two empty columns.
-
-% @item, @tab do not need to be on their own lines, but it will not hurt
-% if they are.
-
-% Sample multitable:
-
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
-% @tab Many paragraphs of text may be used in any column.
-%
-% They will wrap at the width determined by the template.
-% @item@tab@tab This will be in third column.
-% @end multitable
-
-% Default dimensions may be reset by user.
-% @multitableparskip is vertical space between paragraphs in table.
-% @multitableparindent is paragraph indent in table.
-% @multitablecolmargin is horizontal space to be left between columns.
-% @multitablelinespace is space to leave between table items, baseline
-% to baseline.
-% 0pt means it depends on current normal line spacing.
-%
-\newskip\multitableparskip
-\newskip\multitableparindent
-\newdimen\multitablecolspace
-\newskip\multitablelinespace
-\multitableparskip=0pt
-\multitableparindent=6pt
-\multitablecolspace=12pt
-\multitablelinespace=0pt
-
-% Macros used to set up halign preamble:
-%
-\let\endsetuptable\relax
-\def\xendsetuptable{\endsetuptable}
-\let\columnfractions\relax
-\def\xcolumnfractions{\columnfractions}
-\newif\ifsetpercent
-
-% #1 is the @columnfraction, usually a decimal number like .5, but might
-% be just 1. We just use it, whatever it is.
-%
-\def\pickupwholefraction#1 {%
- \global\advance\colcount by 1
- \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
- \setuptable
-}
-
-\newcount\colcount
-\def\setuptable#1{%
- \def\firstarg{#1}%
- \ifx\firstarg\xendsetuptable
- \let\go = \relax
- \else
- \ifx\firstarg\xcolumnfractions
- \global\setpercenttrue
- \else
- \ifsetpercent
- \let\go\pickupwholefraction
- \else
- \global\advance\colcount by 1
- \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
- % separator; typically that is always in the input, anyway.
- \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
- \fi
- \fi
- \ifx\go\pickupwholefraction
- % Put the argument back for the \pickupwholefraction call, so
- % we'll always have a period there to be parsed.
- \def\go{\pickupwholefraction#1}%
- \else
- \let\go = \setuptable
- \fi%
- \fi
- \go
-}
-
-% multitable-only commands.
-%
-% @headitem starts a heading row, which we typeset in bold.
-% Assignments have to be global since we are inside the implicit group
-% of an alignment entry. \everycr resets \everytab so we don't have to
-% undo it ourselves.
-\def\headitemfont{\b}% for people to use in the template row; not changeable
-\def\headitem{%
- \checkenv\multitable
- \crcr
- \global\everytab={\bf}% can't use \headitemfont since the parsing differs
- \the\everytab % for the first item
-}%
-%
-% A \tab used to include \hskip1sp. But then the space in a template
-% line is not enough. That is bad. So let's go back to just `&' until
-% we again encounter the problem the 1sp was intended to solve.
-% --karl, nathan@acm.org, 20apr99.
-\def\tab{\checkenv\multitable &\the\everytab}%
-
-% @multitable ... @end multitable definitions:
-%
-\newtoks\everytab % insert after every tab.
-%
-\envdef\multitable{%
- \vskip\parskip
- \startsavinginserts
- %
- % @item within a multitable starts a normal row.
- % We use \def instead of \let so that if one of the multitable entries
- % contains an @itemize, we don't choke on the \item (seen as \crcr aka
- % \endtemplate) expanding \doitemize.
- \def\item{\crcr}%
- %
- \tolerance=9500
- \hbadness=9500
- \setmultitablespacing
- \parskip=\multitableparskip
- \parindent=\multitableparindent
- \overfullrule=0pt
- \global\colcount=0
- %
- \everycr = {%
- \noalign{%
- \global\everytab={}%
- \global\colcount=0 % Reset the column counter.
- % Check for saved footnotes, etc.
- \checkinserts
- % Keeps underfull box messages off when table breaks over pages.
- %\filbreak
- % Maybe so, but it also creates really weird page breaks when the
- % table breaks over pages. Wouldn't \vfil be better? Wait until the
- % problem manifests itself, so it can be fixed for real --karl.
- }%
- }%
- %
- \parsearg\domultitable
-}
-\def\domultitable#1{%
- % To parse everything between @multitable and @item:
- \setuptable#1 \endsetuptable
- %
- % This preamble sets up a generic column definition, which will
- % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
- % continue for many paragraphs if desired.
- \halign\bgroup &%
- \global\advance\colcount by 1
- \multistrut
- \vtop{%
- % Use the current \colcount to find the correct column width:
- \hsize=\expandafter\csname col\the\colcount\endcsname
- %
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- %
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- %
- % If the user has set preamble in terms of percent of \hsize we will
- % use that dimension as the width of the column, and the \leftskip
- % will keep entries from bumping into each other. Table will start at
- % left margin and final column will justify at right margin.
- %
- % Make sure we don't inherit \rightskip from the outer environment.
- \rightskip=0pt
- \ifnum\colcount=1
- % The first column will be indented with the surrounding text.
- \advance\hsize by\leftskip
- \else
- \ifsetpercent \else
- % If user has not set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace.
- \advance\hsize by \multitablecolspace
- \fi
- % In either case we will make \leftskip=\multitablecolspace:
- \leftskip=\multitablecolspace
- \fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively
- % marking characters.
- \noindent\ignorespaces##\unskip\multistrut
- }\cr
-}
-\def\Emultitable{%
- \crcr
- \egroup % end the \halign
- \global\setpercentfalse
-}
-
-\def\setmultitablespacing{%
- \def\multistrut{\strut}% just use the standard line spacing
- %
- % Compute \multitablelinespace (if not defined by user) for use in
- % \multitableparskip calculation. We used define \multistrut based on
- % this, but (ironically) that caused the spacing to be off.
- % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
-\ifdim\multitablelinespace=0pt
-\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
-\global\advance\multitablelinespace by-\ht0
-\fi
-% Test to see if parskip is larger than space between lines of
-% table. If not, do nothing.
-% If so, set to same dimension as multitablelinespace.
-\ifdim\multitableparskip>\multitablelinespace
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
- % than skip between lines in the table.
-\fi%
-\ifdim\multitableparskip=0pt
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
- % than skip between lines in the table.
-\fi}
-
-
-\message{conditionals,}
-
-% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
-% @ifnotxml always succeed. They currently do nothing; we don't
-% attempt to check whether the conditionals are properly nested. But we
-% have to remember that they are conditionals, so that @end doesn't
-% attempt to close an environment group.
-%
-\def\makecond#1{%
- \expandafter\let\csname #1\endcsname = \relax
- \expandafter\let\csname iscond.#1\endcsname = 1
-}
-\makecond{iftex}
-\makecond{ifnotdocbook}
-\makecond{ifnothtml}
-\makecond{ifnotinfo}
-\makecond{ifnotplaintext}
-\makecond{ifnotxml}
-
-% Ignore @ignore, @ifhtml, @ifinfo, and the like.
-%
-\def\direntry{\doignore{direntry}}
-\def\documentdescription{\doignore{documentdescription}}
-\def\docbook{\doignore{docbook}}
-\def\html{\doignore{html}}
-\def\ifdocbook{\doignore{ifdocbook}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\ifplaintext{\doignore{ifplaintext}}
-\def\ifxml{\doignore{ifxml}}
-\def\ignore{\doignore{ignore}}
-\def\menu{\doignore{menu}}
-\def\xml{\doignore{xml}}
-
-% Ignore text until a line `@end #1', keeping track of nested conditionals.
-%
-% A count to remember the depth of nesting.
-\newcount\doignorecount
-
-\def\doignore#1{\begingroup
- % Scan in ``verbatim'' mode:
- \obeylines
- \catcode`\@ = \other
- \catcode`\{ = \other
- \catcode`\} = \other
- %
- % Make sure that spaces turn into tokens that match what \doignoretext wants.
- \spaceisspace
- %
- % Count number of #1's that we've seen.
- \doignorecount = 0
- %
- % Swallow text until we reach the matching `@end #1'.
- \dodoignore{#1}%
-}
-
-{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
- \obeylines %
- %
- \gdef\dodoignore#1{%
- % #1 contains the command name as a string, e.g., `ifinfo'.
- %
- % Define a command to find the next `@end #1'.
- \long\def\doignoretext##1^^M@end #1{%
- \doignoretextyyy##1^^M@#1\_STOP_}%
- %
- % And this command to find another #1 command, at the beginning of a
- % line. (Otherwise, we would consider a line `@c @ifset', for
- % example, to count as an @ifset for nesting.)
- \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
- %
- % And now expand that command.
- \doignoretext ^^M%
- }%
-}
-
-\def\doignoreyyy#1{%
- \def\temp{#1}%
- \ifx\temp\empty % Nothing found.
- \let\next\doignoretextzzz
- \else % Found a nested condition, ...
- \advance\doignorecount by 1
- \let\next\doignoretextyyy % ..., look for another.
- % If we're here, #1 ends with ^^M\ifinfo (for example).
- \fi
- \next #1% the token \_STOP_ is present just after this macro.
-}
-
-% We have to swallow the remaining "\_STOP_".
-%
-\def\doignoretextzzz#1{%
- \ifnum\doignorecount = 0 % We have just found the outermost @end.
- \let\next\enddoignore
- \else % Still inside a nested condition.
- \advance\doignorecount by -1
- \let\next\doignoretext % Look for the next @end.
- \fi
- \next
-}
-
-% Finish off ignored text.
-{ \obeylines%
- % Ignore anything after the last `@end #1'; this matters in verbatim
- % environments, where otherwise the newline after an ignored conditional
- % would result in a blank line in the output.
- \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
-}
-
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it.
-% We rely on the fact that \parsearg sets \catcode`\ =10.
-%
-\parseargdef\set{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
- {%
- \makevalueexpandable
- \def\temp{#2}%
- \edef\next{\gdef\makecsname{SET#1}}%
- \ifx\temp\empty
- \next{}%
- \else
- \setzzz#2\endsetzzz
- \fi
- }%
-}
-% Remove the trailing space \setxxx inserted.
-\def\setzzz#1 \endsetzzz{\next{#1}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\parseargdef\clear{%
- {%
- \makevalueexpandable
- \global\expandafter\let\csname SET#1\endcsname=\relax
- }%
-}
-
-% @value{foo} gets the text saved in variable foo.
-\def\value{\begingroup\makevalueexpandable\valuexxx}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-{
- \catcode`\- = \active \catcode`\_ = \active
- %
- \gdef\makevalueexpandable{%
- \let\value = \expandablevalue
- % We don't want these characters active, ...
- \catcode`\-=\other \catcode`\_=\other
- % ..., but we might end up with active ones in the argument if
- % we're called from @code, as @code{@value{foo-bar_}}, though.
- % So \let them to their normal equivalents.
- \let-\realdash \let_\normalunderscore
- }
-}
-
-% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we call \makevalueexpandable in \indexdummies).
-% The command has to be fully expandable (if the variable is set), since
-% the result winds up in the index file. This means that if the
-% variable's value contains other Texinfo commands, it's almost certain
-% it will fail (although perhaps we could fix that with sufficient work
-% to do a one-level expansion on the result, instead of complete).
-%
-\def\expandablevalue#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- {[No value for ``#1'']}%
- \message{Variable `#1', used in @value, is not set.}%
- \else
- \csname SET#1\endcsname
- \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-%
-% To get special treatment of `@end ifset,' call \makeond and the redefine.
-%
-\makecond{ifset}
-\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
-\def\doifset#1#2{%
- {%
- \makevalueexpandable
- \let\next=\empty
- \expandafter\ifx\csname SET#2\endcsname\relax
- #1% If not set, redefine \next.
- \fi
- \expandafter
- }\next
-}
-\def\ifsetfail{\doignore{ifset}}
-
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-% The `\else' inside the `\doifset' parameter is a trick to reuse the
-% above code: if the variable is not set, do nothing, if it is set,
-% then redefine \next to \ifclearfail.
-%
-\makecond{ifclear}
-\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
-\def\ifclearfail{\doignore{ifclear}}
-
-% @dircategory CATEGORY -- specify a category of the dir file
-% which this file should belong to. Ignore this in TeX.
-\let\dircategory=\comment
-
-% @defininfoenclose.
-\let\definfoenclose=\comment
-
-
-\message{indexing,}
-% Index generation facilities
-
-% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within macros and \if's.
-\edef\newwrite{\makecsname{ptexnewwrite}}
-
-% \newindex {foo} defines an index named foo.
-% It automatically defines \fooindex such that
-% \fooindex ...rest of line... puts an entry in the index foo.
-% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
-% The name of an index should be no more than 2 characters long
-% for the sake of vms.
-%
-\def\newindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
- \fi
- \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
- \noexpand\doindex{#1}}
-}
-
-% @defindex foo == \newindex{foo}
-%
-\def\defindex{\parsearg\newindex}
-
-% Define @defcodeindex, like @defindex except put all entries in @code.
-%
-\def\defcodeindex{\parsearg\newcodeindex}
-%
-\def\newcodeindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1
- \fi
- \expandafter\xdef\csname#1index\endcsname{%
- \noexpand\docodeindex{#1}}%
-}
-
-
-% @synindex foo bar makes index foo feed into index bar.
-% Do this instead of @defindex foo if you don't want it as a separate index.
-%
-% @syncodeindex foo bar similar, but put all entries made for index foo
-% inside @code.
-%
-\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
-\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
-
-% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
-% #3 the target index (bar).
-\def\dosynindex#1#2#3{%
- % Only do \closeout if we haven't already done it, else we'll end up
- % closing the target index.
- \expandafter \ifx\csname donesynindex#2\endcsname \relax
- % The \closeout helps reduce unnecessary open files; the limit on the
- % Acorn RISC OS is a mere 16 files.
- \expandafter\closeout\csname#2indfile\endcsname
- \expandafter\let\csname donesynindex#2\endcsname = 1
- \fi
- % redefine \fooindfile:
- \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
- \expandafter\let\csname#2indfile\endcsname=\temp
- % redefine \fooindex:
- \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
-}
-
-% Define \doindex, the driver for all \fooindex macros.
-% Argument #1 is generated by the calling \fooindex macro,
-% and it is "foo", the name of the index.
-
-% \doindex just uses \parsearg; it calls \doind for the actual work.
-% This is because \doind is more useful to call from other macros.
-
-% There is also \dosubind {index}{topic}{subtopic}
-% which makes an entry in a two-level index such as the operation index.
-
-\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
-\def\singleindexer #1{\doind{\indexname}{#1}}
-
-% like the previous two, but they put @code around the argument.
-\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
-\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
-
-% Take care of Texinfo commands that can appear in an index entry.
-% Since there are some commands we want to expand, and others we don't,
-% we have to laboriously prevent expansion for those that we don't.
-%
-\def\indexdummies{%
- \escapechar = `\\ % use backslash in output files.
- \def\@{@}% change to @@ when we switch to @ as escape char in index files.
- \def\ {\realbackslash\space }%
- %
- % Need these unexpandable (because we define \tt as a dummy)
- % definitions when @{ or @} appear in index entry text. Also, more
- % complicated, when \tex is in effect and \{ is a \delimiter again.
- % We can't use \lbracecmd and \rbracecmd because texindex assumes
- % braces and backslashes are used only as delimiters. Perhaps we
- % should define @lbrace and @rbrace commands a la @comma.
- \def\{{{\tt\char123}}%
- \def\}{{\tt\char125}}%
- %
- % I don't entirely understand this, but when an index entry is
- % generated from a macro call, the \endinput which \scanmacro inserts
- % causes processing to be prematurely terminated. This is,
- % apparently, because \indexsorttmp is fully expanded, and \endinput
- % is an expandable command. The redefinition below makes \endinput
- % disappear altogether for that purpose -- although logging shows that
- % processing continues to some further point. On the other hand, it
- % seems \endinput does not hurt in the printed index arg, since that
- % is still getting written without apparent harm.
- %
- % Sample source (mac-idx3.tex, reported by Graham Percival to
- % help-texinfo, 22may06):
- % @macro funindex {WORD}
- % @findex xyz
- % @end macro
- % ...
- % @funindex commtest
- %
- % The above is not enough to reproduce the bug, but it gives the flavor.
- %
- % Sample whatsit resulting:
- % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
- %
- % So:
- \let\endinput = \empty
- %
- % Do the redefinitions.
- \commondummies
-}
-
-% For the aux and toc files, @ is the escape character. So we want to
-% redefine everything using @ as the escape character (instead of
-% \realbackslash, still used for index files). When everything uses @,
-% this will be simpler.
-%
-\def\atdummies{%
- \def\@{@@}%
- \def\ {@ }%
- \let\{ = \lbraceatcmd
- \let\} = \rbraceatcmd
- %
- % Do the redefinitions.
- \commondummies
- \otherbackslash
-}
-
-% Called from \indexdummies and \atdummies.
-%
-\def\commondummies{%
- %
- % \definedummyword defines \#1 as \string\#1\space, thus effectively
- % preventing its expansion. This is used only for control words,
- % not control letters, because the \space would be incorrect for
- % control characters, but is needed to separate the control word
- % from whatever follows.
- %
- % For control letters, we have \definedummyletter, which omits the
- % space.
- %
- % These can be used both for control words that take an argument and
- % those that do not. If it is followed by {arg} in the input, then
- % that will dutifully get written to the index (or wherever).
- %
- \def\definedummyword ##1{\def##1{\string##1\space}}%
- \def\definedummyletter##1{\def##1{\string##1}}%
- \let\definedummyaccent\definedummyletter
- %
- \commondummiesnofonts
- %
- \definedummyletter\_%
- \definedummyletter\-%
- %
- % Non-English letters.
- \definedummyword\AA
- \definedummyword\AE
- \definedummyword\DH
- \definedummyword\L
- \definedummyword\O
- \definedummyword\OE
- \definedummyword\TH
- \definedummyword\aa
- \definedummyword\ae
- \definedummyword\dh
- \definedummyword\exclamdown
- \definedummyword\l
- \definedummyword\o
- \definedummyword\oe
- \definedummyword\ordf
- \definedummyword\ordm
- \definedummyword\questiondown
- \definedummyword\ss
- \definedummyword\th
- %
- % Although these internal commands shouldn't show up, sometimes they do.
- \definedummyword\bf
- \definedummyword\gtr
- \definedummyword\hat
- \definedummyword\less
- \definedummyword\sf
- \definedummyword\sl
- \definedummyword\tclose
- \definedummyword\tt
- %
- \definedummyword\LaTeX
- \definedummyword\TeX
- %
- % Assorted special characters.
- \definedummyword\arrow
- \definedummyword\bullet
- \definedummyword\comma
- \definedummyword\copyright
- \definedummyword\registeredsymbol
- \definedummyword\dots
- \definedummyword\enddots
- \definedummyword\entrybreak
- \definedummyword\equiv
- \definedummyword\error
- \definedummyword\euro
- \definedummyword\expansion
- \definedummyword\geq
- \definedummyword\guillemetleft
- \definedummyword\guillemetright
- \definedummyword\guilsinglleft
- \definedummyword\guilsinglright
- \definedummyword\lbracechar
- \definedummyword\leq
- \definedummyword\minus
- \definedummyword\ogonek
- \definedummyword\pounds
- \definedummyword\point
- \definedummyword\print
- \definedummyword\quotedblbase
- \definedummyword\quotedblleft
- \definedummyword\quotedblright
- \definedummyword\quoteleft
- \definedummyword\quoteright
- \definedummyword\quotesinglbase
- \definedummyword\rbracechar
- \definedummyword\result
- \definedummyword\textdegree
- %
- % We want to disable all macros so that they are not expanded by \write.
- \macrolist
- %
- \normalturnoffactive
- %
- % Handle some cases of @value -- where it does not contain any
- % (non-fully-expandable) commands.
- \makevalueexpandable
-}
-
-% \commondummiesnofonts: common to \commondummies and \indexnofonts.
-%
-\def\commondummiesnofonts{%
- % Control letters and accents.
- \definedummyletter\!%
- \definedummyaccent\"%
- \definedummyaccent\'%
- \definedummyletter\*%
- \definedummyaccent\,%
- \definedummyletter\.%
- \definedummyletter\/%
- \definedummyletter\:%
- \definedummyaccent\=%
- \definedummyletter\?%
- \definedummyaccent\^%
- \definedummyaccent\`%
- \definedummyaccent\~%
- \definedummyword\u
- \definedummyword\v
- \definedummyword\H
- \definedummyword\dotaccent
- \definedummyword\ogonek
- \definedummyword\ringaccent
- \definedummyword\tieaccent
- \definedummyword\ubaraccent
- \definedummyword\udotaccent
- \definedummyword\dotless
- %
- % Texinfo font commands.
- \definedummyword\b
- \definedummyword\i
- \definedummyword\r
- \definedummyword\sansserif
- \definedummyword\sc
- \definedummyword\slanted
- \definedummyword\t
- %
- % Commands that take arguments.
- \definedummyword\abbr
- \definedummyword\acronym
- \definedummyword\anchor
- \definedummyword\cite
- \definedummyword\code
- \definedummyword\command
- \definedummyword\dfn
- \definedummyword\dmn
- \definedummyword\email
- \definedummyword\emph
- \definedummyword\env
- \definedummyword\file
- \definedummyword\image
- \definedummyword\indicateurl
- \definedummyword\inforef
- \definedummyword\kbd
- \definedummyword\key
- \definedummyword\math
- \definedummyword\option
- \definedummyword\pxref
- \definedummyword\ref
- \definedummyword\samp
- \definedummyword\strong
- \definedummyword\tie
- \definedummyword\uref
- \definedummyword\url
- \definedummyword\var
- \definedummyword\verb
- \definedummyword\w
- \definedummyword\xref
-}
-
-% \indexnofonts is used when outputting the strings to sort the index
-% by, and when constructing control sequence names. It eliminates all
-% control sequences and just writes whatever the best ASCII sort string
-% would be for a given command (usually its argument).
-%
-\def\indexnofonts{%
- % Accent commands should become @asis.
- \def\definedummyaccent##1{\let##1\asis}%
- % We can just ignore other control letters.
- \def\definedummyletter##1{\let##1\empty}%
- % All control words become @asis by default; overrides below.
- \let\definedummyword\definedummyaccent
- %
- \commondummiesnofonts
- %
- % Don't no-op \tt, since it isn't a user-level command
- % and is used in the definitions of the active chars like <, >, |, etc.
- % Likewise with the other plain tex font commands.
- %\let\tt=\asis
- %
- \def\ { }%
- \def\@{@}%
- \def\_{\normalunderscore}%
- \def\-{}% @- shouldn't affect sorting
- %
- % Unfortunately, texindex is not prepared to handle braces in the
- % content at all. So for index sorting, we map @{ and @} to strings
- % starting with |, since that ASCII character is between ASCII { and }.
- \def\{{|a}%
- \def\lbracechar{|a}%
- %
- \def\}{|b}%
- \def\rbracechar{|b}%
- %
- % Non-English letters.
- \def\AA{AA}%
- \def\AE{AE}%
- \def\DH{DZZ}%
- \def\L{L}%
- \def\OE{OE}%
- \def\O{O}%
- \def\TH{ZZZ}%
- \def\aa{aa}%
- \def\ae{ae}%
- \def\dh{dzz}%
- \def\exclamdown{!}%
- \def\l{l}%
- \def\oe{oe}%
- \def\ordf{a}%
- \def\ordm{o}%
- \def\o{o}%
- \def\questiondown{?}%
- \def\ss{ss}%
- \def\th{zzz}%
- %
- \def\LaTeX{LaTeX}%
- \def\TeX{TeX}%
- %
- % Assorted special characters.
- % (The following {} will end up in the sort string, but that's ok.)
- \def\arrow{->}%
- \def\bullet{bullet}%
- \def\comma{,}%
- \def\copyright{copyright}%
- \def\dots{...}%
- \def\enddots{...}%
- \def\equiv{==}%
- \def\error{error}%
- \def\euro{euro}%
- \def\expansion{==>}%
- \def\geq{>=}%
- \def\guillemetleft{<<}%
- \def\guillemetright{>>}%
- \def\guilsinglleft{<}%
- \def\guilsinglright{>}%
- \def\leq{<=}%
- \def\minus{-}%
- \def\point{.}%
- \def\pounds{pounds}%
- \def\print{-|}%
- \def\quotedblbase{"}%
- \def\quotedblleft{"}%
- \def\quotedblright{"}%
- \def\quoteleft{`}%
- \def\quoteright{'}%
- \def\quotesinglbase{,}%
- \def\registeredsymbol{R}%
- \def\result{=>}%
- \def\textdegree{o}%
- %
- \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax
- \else \indexlquoteignore \fi
- %
- % We need to get rid of all macros, leaving only the arguments (if present).
- % Of course this is not nearly correct, but it is the best we can do for now.
- % makeinfo does not expand macros in the argument to @deffn, which ends up
- % writing an index entry, and texindex isn't prepared for an index sort entry
- % that starts with \.
- %
- % Since macro invocations are followed by braces, we can just redefine them
- % to take a single TeX argument. The case of a macro invocation that
- % goes to end-of-line is not handled.
- %
- \macrolist
-}
-
-% Undocumented (for FSFS 2nd ed.): @set txiindexlquoteignore makes us
-% ignore left quotes in the sort term.
-{\catcode`\`=\active
- \gdef\indexlquoteignore{\let`=\empty}}
-
-\let\indexbackslash=0 %overridden during \printindex.
-\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
-
-% Most index entries go through here, but \dosubind is the general case.
-% #1 is the index name, #2 is the entry text.
-\def\doind#1#2{\dosubind{#1}{#2}{}}
-
-% Workhorse for all \fooindexes.
-% #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% empty if called from \doind, as we usually are (the main exception
-% is with most defuns, which call us directly).
-%
-\def\dosubind#1#2#3{%
- \iflinks
- {%
- % Store the main index entry text (including the third arg).
- \toks0 = {#2}%
- % If third arg is present, precede it with a space.
- \def\thirdarg{#3}%
- \ifx\thirdarg\empty \else
- \toks0 = \expandafter{\the\toks0 \space #3}%
- \fi
- %
- \edef\writeto{\csname#1indfile\endcsname}%
- %
- \safewhatsit\dosubindwrite
- }%
- \fi
-}
-
-% Write the entry in \toks0 to the index file:
-%
-\def\dosubindwrite{%
- % Put the index entry in the margin if desired.
- \ifx\SETmarginindex\relax\else
- \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
- \fi
- %
- % Remember, we are within a group.
- \indexdummies % Must do this here, since \bf, etc expand at this stage
- \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
- % so it will be output as is; and it will print as backslash.
- %
- % Process the index entry with all font commands turned off, to
- % get the string to sort by.
- {\indexnofonts
- \edef\temp{\the\toks0}% need full expansion
- \xdef\indexsorttmp{\temp}%
- }%
- %
- % Set up the complete index entry, with both the sort key and
- % the original text, including any font commands. We write
- % three arguments to \entry to the .?? file (four in the
- % subentry case), texindex reduces to two when writing the .??s
- % sorted result.
- \edef\temp{%
- \write\writeto{%
- \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
- }%
- \temp
-}
-
-% Take care of unwanted page breaks/skips around a whatsit:
-%
-% If a skip is the last thing on the list now, preserve it
-% by backing up by \lastskip, doing the \write, then inserting
-% the skip again. Otherwise, the whatsit generated by the
-% \write or \pdfdest will make \lastskip zero. The result is that
-% sequences like this:
-% @end defun
-% @tindex whatever
-% @defun ...
-% will have extra space inserted, because the \medbreak in the
-% start of the @defun won't see the skip inserted by the @end of
-% the previous defun.
-%
-% But don't do any of this if we're not in vertical mode. We
-% don't want to do a \vskip and prematurely end a paragraph.
-%
-% Avoid page breaks due to these extra skips, too.
-%
-% But wait, there is a catch there:
-% We'll have to check whether \lastskip is zero skip. \ifdim is not
-% sufficient for this purpose, as it ignores stretch and shrink parts
-% of the skip. The only way seems to be to check the textual
-% representation of the skip.
-%
-% The following is almost like \def\zeroskipmacro{0.0pt} except that
-% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
-%
-\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
-%
-\newskip\whatsitskip
-\newcount\whatsitpenalty
-%
-% ..., ready, GO:
-%
-\def\safewhatsit#1{\ifhmode
- #1%
- \else
- % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
- \whatsitskip = \lastskip
- \edef\lastskipmacro{\the\lastskip}%
- \whatsitpenalty = \lastpenalty
- %
- % If \lastskip is nonzero, that means the last item was a
- % skip. And since a skip is discardable, that means this
- % -\whatsitskip glue we're inserting is preceded by a
- % non-discardable item, therefore it is not a potential
- % breakpoint, therefore no \nobreak needed.
- \ifx\lastskipmacro\zeroskipmacro
- \else
- \vskip-\whatsitskip
- \fi
- %
- #1%
- %
- \ifx\lastskipmacro\zeroskipmacro
- % If \lastskip was zero, perhaps the last item was a penalty, and
- % perhaps it was >=10000, e.g., a \nobreak. In that case, we want
- % to re-insert the same penalty (values >10000 are used for various
- % signals); since we just inserted a non-discardable item, any
- % following glue (such as a \parskip) would be a breakpoint. For example:
- % @deffn deffn-whatever
- % @vindex index-whatever
- % Description.
- % would allow a break between the index-whatever whatsit
- % and the "Description." paragraph.
- \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
- \else
- % On the other hand, if we had a nonzero \lastskip,
- % this make-up glue would be preceded by a non-discardable item
- % (the whatsit from the \write), so we must insert a \nobreak.
- \nobreak\vskip\whatsitskip
- \fi
-\fi}
-
-% The index entry written in the file actually looks like
-% \entry {sortstring}{page}{topic}
-% or
-% \entry {sortstring}{page}{topic}{subtopic}
-% The texindex program reads in these files and writes files
-% containing these kinds of lines:
-% \initial {c}
-% before the first topic whose initial is c
-% \entry {topic}{pagelist}
-% for a topic that is used without subtopics
-% \primary {topic}
-% for the beginning of a topic that is used with subtopics
-% \secondary {subtopic}{pagelist}
-% for each subtopic.
-
-% Define the user-accessible indexing commands
-% @findex, @vindex, @kindex, @cindex.
-
-\def\findex {\fnindex}
-\def\kindex {\kyindex}
-\def\cindex {\cpindex}
-\def\vindex {\vrindex}
-\def\tindex {\tpindex}
-\def\pindex {\pgindex}
-
-\def\cindexsub {\begingroup\obeylines\cindexsub}
-{\obeylines %
-\gdef\cindexsub "#1" #2^^M{\endgroup %
-\dosubind{cp}{#2}{#1}}}
-
-% Define the macros used in formatting output of the sorted index material.
-
-% @printindex causes a particular index (the ??s file) to get printed.
-% It does not print any chapter heading (usually an @unnumbered).
-%
-\parseargdef\printindex{\begingroup
- \dobreak \chapheadingskip{10000}%
- %
- \smallfonts \rm
- \tolerance = 9500
- \plainfrenchspacing
- \everypar = {}% don't want the \kern\-parindent from indentation suppression.
- %
- % See if the index file exists and is nonempty.
- % Change catcode of @ here so that if the index file contains
- % \initial {@}
- % as its first line, TeX doesn't complain about mismatched braces
- % (because it thinks @} is a control sequence).
- \catcode`\@ = 11
- \openin 1 \jobname.#1s
- \ifeof 1
- % \enddoublecolumns gets confused if there is no text in the index,
- % and it loses the chapter title and the aux file entries for the
- % index. The easiest way to prevent this problem is to make sure
- % there is some text.
- \putwordIndexNonexistent
- \else
- %
- % If the index file exists but is empty, then \openin leaves \ifeof
- % false. We have to make TeX try to read something from the file, so
- % it can discover if there is anything in it.
- \read 1 to \temp
- \ifeof 1
- \putwordIndexIsEmpty
- \else
- % Index files are almost Texinfo source, but we use \ as the escape
- % character. It would be better to use @, but that's too big a change
- % to make right now.
- \def\indexbackslash{\backslashcurfont}%
- \catcode`\\ = 0
- \escapechar = `\\
- \begindoublecolumns
- \input \jobname.#1s
- \enddoublecolumns
- \fi
- \fi
- \closein 1
-\endgroup}
-
-% These macros are used by the sorted index file itself.
-% Change them to control the appearance of the index.
-
-\def\initial#1{{%
- % Some minor font changes for the special characters.
- \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
- %
- % Remove any glue we may have, we'll be inserting our own.
- \removelastskip
- %
- % We like breaks before the index initials, so insert a bonus.
- \nobreak
- \vskip 0pt plus 3\baselineskip
- \penalty 0
- \vskip 0pt plus -3\baselineskip
- %
- % Typeset the initial. Making this add up to a whole number of
- % baselineskips increases the chance of the dots lining up from column
- % to column. It still won't often be perfect, because of the stretch
- % we need before each entry, but it's better.
- %
- % No shrink because it confuses \balancecolumns.
- \vskip 1.67\baselineskip plus .5\baselineskip
- \leftline{\secbf #1}%
- % Do our best not to break after the initial.
- \nobreak
- \vskip .33\baselineskip plus .1\baselineskip
-}}
-
-% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
-% then page number (#2) flushed to the right margin. It is used for index
-% and table of contents entries. The paragraph is indented by \leftskip.
-%
-% A straightforward implementation would start like this:
-% \def\entry#1#2{...
-% But this freezes the catcodes in the argument, and can cause problems to
-% @code, which sets - active. This problem was fixed by a kludge---
-% ``-'' was active throughout whole index, but this isn't really right.
-% The right solution is to prevent \entry from swallowing the whole text.
-% --kasal, 21nov03
-\def\entry{%
- \begingroup
- %
- % Start a new paragraph if necessary, so our assignments below can't
- % affect previous text.
- \par
- %
- % Do not fill out the last line with white space.
- \parfillskip = 0in
- %
- % No extra space above this paragraph.
- \parskip = 0in
- %
- % Do not prefer a separate line ending with a hyphen to fewer lines.
- \finalhyphendemerits = 0
- %
- % \hangindent is only relevant when the entry text and page number
- % don't both fit on one line. In that case, bob suggests starting the
- % dots pretty far over on the line. Unfortunately, a large
- % indentation looks wrong when the entry text itself is broken across
- % lines. So we use a small indentation and put up with long leaders.
- %
- % \hangafter is reset to 1 (which is the value we want) at the start
- % of each paragraph, so we need not do anything with that.
- \hangindent = 2em
- %
- % When the entry text needs to be broken, just fill out the first line
- % with blank space.
- \rightskip = 0pt plus1fil
- %
- % A bit of stretch before each entry for the benefit of balancing
- % columns.
- \vskip 0pt plus1pt
- %
- % When reading the text of entry, convert explicit line breaks
- % from @* into spaces. The user might give these in long section
- % titles, for instance.
- \def\*{\unskip\space\ignorespaces}%
- \def\entrybreak{\hfil\break}%
- %
- % Swallow the left brace of the text (first parameter):
- \afterassignment\doentry
- \let\temp =
-}
-\def\entrybreak{\unskip\space\ignorespaces}%
-\def\doentry{%
- \bgroup % Instead of the swallowed brace.
- \noindent
- \aftergroup\finishentry
- % And now comes the text of the entry.
-}
-\def\finishentry#1{%
- % #1 is the page number.
- %
- % The following is kludged to not output a line of dots in the index if
- % there are no page numbers. The next person who breaks this will be
- % cursed by a Unix daemon.
- \setbox\boxA = \hbox{#1}%
- \ifdim\wd\boxA = 0pt
- \ %
- \else
- %
- % If we must, put the page number on a line of its own, and fill out
- % this line with blank space. (The \hfil is overwhelmed with the
- % fill leaders glue in \indexdotfill if the page number does fit.)
- \hfil\penalty50
- \null\nobreak\indexdotfill % Have leaders before the page number.
- %
- % The `\ ' here is removed by the implicit \unskip that TeX does as
- % part of (the primitive) \par. Without it, a spurious underfull
- % \hbox ensues.
- \ifpdf
- \pdfgettoks#1.%
- \ \the\toksA
- \else
- \ #1%
- \fi
- \fi
- \par
- \endgroup
-}
-
-% Like plain.tex's \dotfill, except uses up at least 1 em.
-\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
-
-\def\primary #1{\line{#1\hfil}}
-
-\newskip\secondaryindent \secondaryindent=0.5cm
-\def\secondary#1#2{{%
- \parfillskip=0in
- \parskip=0in
- \hangindent=1in
- \hangafter=1
- \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
- \ifpdf
- \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
- \else
- #2
- \fi
- \par
-}}
-
-% Define two-column mode, which we use to typeset indexes.
-% Adapted from the TeXbook, page 416, which is to say,
-% the manmac.tex format used to print the TeXbook itself.
-\catcode`\@=11
-
-\newbox\partialpage
-\newdimen\doublecolumnhsize
-
-\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
- % Grab any single-column material above us.
- \output = {%
- %
- % Here is a possibility not foreseen in manmac: if we accumulate a
- % whole lot of material, we might end up calling this \output
- % routine twice in a row (see the doublecol-lose test, which is
- % essentially a couple of indexes with @setchapternewpage off). In
- % that case we just ship out what is in \partialpage with the normal
- % output routine. Generally, \partialpage will be empty when this
- % runs and this will be a no-op. See the indexspread.tex test case.
- \ifvoid\partialpage \else
- \onepageout{\pagecontents\partialpage}%
- \fi
- %
- \global\setbox\partialpage = \vbox{%
- % Unvbox the main output page.
- \unvbox\PAGE
- \kern-\topskip \kern\baselineskip
- }%
- }%
- \eject % run that output routine to set \partialpage
- %
- % Use the double-column output routine for subsequent pages.
- \output = {\doublecolumnout}%
- %
- % Change the page size parameters. We could do this once outside this
- % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
- % format, but then we repeat the same computation. Repeating a couple
- % of assignments once per index is clearly meaningless for the
- % execution time, so we may as well do it in one place.
- %
- % First we halve the line length, less a little for the gutter between
- % the columns. We compute the gutter based on the line length, so it
- % changes automatically with the paper format. The magic constant
- % below is chosen so that the gutter has the same value (well, +-<1pt)
- % as it did when we hard-coded it.
- %
- % We put the result in a separate register, \doublecolumhsize, so we
- % can restore it in \pagesofar, after \hsize itself has (potentially)
- % been clobbered.
- %
- \doublecolumnhsize = \hsize
- \advance\doublecolumnhsize by -.04154\hsize
- \divide\doublecolumnhsize by 2
- \hsize = \doublecolumnhsize
- %
- % Double the \vsize as well. (We don't need a separate register here,
- % since nobody clobbers \vsize.)
- \vsize = 2\vsize
-}
-
-% The double-column output routine for all double-column pages except
-% the last.
-%
-\def\doublecolumnout{%
- \splittopskip=\topskip \splitmaxdepth=\maxdepth
- % Get the available space for the double columns -- the normal
- % (undoubled) page height minus any material left over from the
- % previous page.
- \dimen@ = \vsize
- \divide\dimen@ by 2
- \advance\dimen@ by -\ht\partialpage
- %
- % box0 will be the left-hand column, box2 the right.
- \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
- \onepageout\pagesofar
- \unvbox255
- \penalty\outputpenalty
-}
-%
-% Re-output the contents of the output page -- any previous material,
-% followed by the two boxes we just split, in box0 and box2.
-\def\pagesofar{%
- \unvbox\partialpage
- %
- \hsize = \doublecolumnhsize
- \wd0=\hsize \wd2=\hsize
- \hbox to\pagewidth{\box0\hfil\box2}%
-}
-%
-% All done with double columns.
-\def\enddoublecolumns{%
- % The following penalty ensures that the page builder is exercised
- % _before_ we change the output routine. This is necessary in the
- % following situation:
- %
- % The last section of the index consists only of a single entry.
- % Before this section, \pagetotal is less than \pagegoal, so no
- % break occurs before the last section starts. However, the last
- % section, consisting of \initial and the single \entry, does not
- % fit on the page and has to be broken off. Without the following
- % penalty the page builder will not be exercised until \eject
- % below, and by that time we'll already have changed the output
- % routine to the \balancecolumns version, so the next-to-last
- % double-column page will be processed with \balancecolumns, which
- % is wrong: The two columns will go to the main vertical list, with
- % the broken-off section in the recent contributions. As soon as
- % the output routine finishes, TeX starts reconsidering the page
- % break. The two columns and the broken-off section both fit on the
- % page, because the two columns now take up only half of the page
- % goal. When TeX sees \eject from below which follows the final
- % section, it invokes the new output routine that we've set after
- % \balancecolumns below; \onepageout will try to fit the two columns
- % and the final section into the vbox of \pageheight (see
- % \pagebody), causing an overfull box.
- %
- % Note that glue won't work here, because glue does not exercise the
- % page builder, unlike penalties (see The TeXbook, pp. 280-281).
- \penalty0
- %
- \output = {%
- % Split the last of the double-column material. Leave it on the
- % current page, no automatic page break.
- \balancecolumns
- %
- % If we end up splitting too much material for the current page,
- % though, there will be another page break right after this \output
- % invocation ends. Having called \balancecolumns once, we do not
- % want to call it again. Therefore, reset \output to its normal
- % definition right away. (We hope \balancecolumns will never be
- % called on to balance too much material, but if it is, this makes
- % the output somewhat more palatable.)
- \global\output = {\onepageout{\pagecontents\PAGE}}%
- }%
- \eject
- \endgroup % started in \begindoublecolumns
- %
- % \pagegoal was set to the doubled \vsize above, since we restarted
- % the current page. We're now back to normal single-column
- % typesetting, so reset \pagegoal to the normal \vsize (after the
- % \endgroup where \vsize got restored).
- \pagegoal = \vsize
-}
-%
-% Called at the end of the double column material.
-\def\balancecolumns{%
- \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
- \dimen@ = \ht0
- \advance\dimen@ by \topskip
- \advance\dimen@ by-\baselineskip
- \divide\dimen@ by 2 % target to split to
- %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
- \splittopskip = \topskip
- % Loop until we get a decent breakpoint.
- {%
- \vbadness = 10000
- \loop
- \global\setbox3 = \copy0
- \global\setbox1 = \vsplit3 to \dimen@
- \ifdim\ht3>\dimen@
- \global\advance\dimen@ by 1pt
- \repeat
- }%
- %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
- \setbox0=\vbox to\dimen@{\unvbox1}%
- \setbox2=\vbox to\dimen@{\unvbox3}%
- %
- \pagesofar
-}
-\catcode`\@ = \other
-
-
-\message{sectioning,}
-% Chapters, sections, etc.
-
-% Let's start with @part.
-\outer\parseargdef\part{\partzzz{#1}}
-\def\partzzz#1{%
- \chapoddpage
- \null
- \vskip.3\vsize % move it down on the page a bit
- \begingroup
- \noindent \titlefonts\rmisbold #1\par % the text
- \let\lastnode=\empty % no node to associate with
- \writetocentry{part}{#1}{}% but put it in the toc
- \headingsoff % no headline or footline on the part page
- \chapoddpage
- \endgroup
-}
-
-% \unnumberedno is an oxymoron. But we count the unnumbered
-% sections so that we can refer to them unambiguously in the pdf
-% outlines by their "section number". We avoid collisions with chapter
-% numbers by starting them at 10000. (If a document ever has 10000
-% chapters, we're in trouble anyway, I'm sure.)
-\newcount\unnumberedno \unnumberedno = 10000
-\newcount\chapno
-\newcount\secno \secno=0
-\newcount\subsecno \subsecno=0
-\newcount\subsubsecno \subsubsecno=0
-
-% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount\appendixno \appendixno = `\@
-%
-% \def\appendixletter{\char\the\appendixno}
-% We do the following ugly conditional instead of the above simple
-% construct for the sake of pdftex, which needs the actual
-% letter in the expansion, not just typeset.
-%
-\def\appendixletter{%
- \ifnum\appendixno=`A A%
- \else\ifnum\appendixno=`B B%
- \else\ifnum\appendixno=`C C%
- \else\ifnum\appendixno=`D D%
- \else\ifnum\appendixno=`E E%
- \else\ifnum\appendixno=`F F%
- \else\ifnum\appendixno=`G G%
- \else\ifnum\appendixno=`H H%
- \else\ifnum\appendixno=`I I%
- \else\ifnum\appendixno=`J J%
- \else\ifnum\appendixno=`K K%
- \else\ifnum\appendixno=`L L%
- \else\ifnum\appendixno=`M M%
- \else\ifnum\appendixno=`N N%
- \else\ifnum\appendixno=`O O%
- \else\ifnum\appendixno=`P P%
- \else\ifnum\appendixno=`Q Q%
- \else\ifnum\appendixno=`R R%
- \else\ifnum\appendixno=`S S%
- \else\ifnum\appendixno=`T T%
- \else\ifnum\appendixno=`U U%
- \else\ifnum\appendixno=`V V%
- \else\ifnum\appendixno=`W W%
- \else\ifnum\appendixno=`X X%
- \else\ifnum\appendixno=`Y Y%
- \else\ifnum\appendixno=`Z Z%
- % The \the is necessary, despite appearances, because \appendixletter is
- % expanded while writing the .toc file. \char\appendixno is not
- % expandable, thus it is written literally, thus all appendixes come out
- % with the same letter (or @) in the toc without it.
- \else\char\the\appendixno
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
-
-% Each @chapter defines these (using marks) as the number+name, number
-% and name of the chapter. Page headings and footings can use
-% these. @section does likewise.
-\def\thischapter{}
-\def\thischapternum{}
-\def\thischaptername{}
-\def\thissection{}
-\def\thissectionnum{}
-\def\thissectionname{}
-
-\newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
-
-% @raisesections: treat @section as chapter, @subsection as section, etc.
-\def\raisesections{\global\advance\secbase by -1}
-\let\up=\raisesections % original BFox name
-
-% @lowersections: treat @chapter as section, @section as subsection, etc.
-\def\lowersections{\global\advance\secbase by 1}
-\let\down=\lowersections % original BFox name
-
-% we only have subsub.
-\chardef\maxseclevel = 3
-%
-% A numbered section within an unnumbered changes to unnumbered too.
-% To achieve this, remember the "biggest" unnum. sec. we are currently in:
-\chardef\unnlevel = \maxseclevel
-%
-% Trace whether the current chapter is an appendix or not:
-% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
-\def\chapheadtype{N}
-
-% Choose a heading macro
-% #1 is heading type
-% #2 is heading level
-% #3 is text for heading
-\def\genhead#1#2#3{%
- % Compute the abs. sec. level:
- \absseclevel=#2
- \advance\absseclevel by \secbase
- % Make sure \absseclevel doesn't fall outside the range:
- \ifnum \absseclevel < 0
- \absseclevel = 0
- \else
- \ifnum \absseclevel > 3
- \absseclevel = 3
- \fi
- \fi
- % The heading type:
- \def\headtype{#1}%
- \if \headtype U%
- \ifnum \absseclevel < \unnlevel
- \chardef\unnlevel = \absseclevel
- \fi
- \else
- % Check for appendix sections:
- \ifnum \absseclevel = 0
- \edef\chapheadtype{\headtype}%
- \else
- \if \headtype A\if \chapheadtype N%
- \errmessage{@appendix... within a non-appendix chapter}%
- \fi\fi
- \fi
- % Check for numbered within unnumbered:
- \ifnum \absseclevel > \unnlevel
- \def\headtype{U}%
- \else
- \chardef\unnlevel = 3
- \fi
- \fi
- % Now print the heading:
- \if \headtype U%
- \ifcase\absseclevel
- \unnumberedzzz{#3}%
- \or \unnumberedseczzz{#3}%
- \or \unnumberedsubseczzz{#3}%
- \or \unnumberedsubsubseczzz{#3}%
- \fi
- \else
- \if \headtype A%
- \ifcase\absseclevel
- \appendixzzz{#3}%
- \or \appendixsectionzzz{#3}%
- \or \appendixsubseczzz{#3}%
- \or \appendixsubsubseczzz{#3}%
- \fi
- \else
- \ifcase\absseclevel
- \chapterzzz{#3}%
- \or \seczzz{#3}%
- \or \numberedsubseczzz{#3}%
- \or \numberedsubsubseczzz{#3}%
- \fi
- \fi
- \fi
- \suppressfirstparagraphindent
-}
-
-% an interface:
-\def\numhead{\genhead N}
-\def\apphead{\genhead A}
-\def\unnmhead{\genhead U}
-
-% @chapter, @appendix, @unnumbered. Increment top-level counter, reset
-% all lower-level sectioning counters to zero.
-%
-% Also set \chaplevelprefix, which we prepend to @float sequence numbers
-% (e.g., figures), q.v. By default (before any chapter), that is empty.
-\let\chaplevelprefix = \empty
-%
-\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz#1{%
- % section resetting is \global in case the chapter is in a group, such
- % as an @include file.
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\chapno by 1
- %
- % Used for \float.
- \gdef\chaplevelprefix{\the\chapno.}%
- \resetallfloatnos
- %
- % \putwordChapter can contain complex things in translations.
- \toks0=\expandafter{\putwordChapter}%
- \message{\the\toks0 \space \the\chapno}%
- %
- % Write the actual heading.
- \chapmacro{#1}{Ynumbered}{\the\chapno}%
- %
- % So @section and the like are numbered underneath this chapter.
- \global\let\section = \numberedsec
- \global\let\subsection = \numberedsubsec
- \global\let\subsubsection = \numberedsubsubsec
-}
-
-\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
-%
-\def\appendixzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\appendixno by 1
- \gdef\chaplevelprefix{\appendixletter.}%
- \resetallfloatnos
- %
- % \putwordAppendix can contain complex things in translations.
- \toks0=\expandafter{\putwordAppendix}%
- \message{\the\toks0 \space \appendixletter}%
- %
- \chapmacro{#1}{Yappendix}{\appendixletter}%
- %
- \global\let\section = \appendixsec
- \global\let\subsection = \appendixsubsec
- \global\let\subsubsection = \appendixsubsubsec
-}
-
-% normally unnmhead0 calls unnumberedzzz:
-\outer\parseargdef\unnumbered{\unnmhead0{#1}}
-\def\unnumberedzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\unnumberedno by 1
- %
- % Since an unnumbered has no number, no prefix for figures.
- \global\let\chaplevelprefix = \empty
- \resetallfloatnos
- %
- % This used to be simply \message{#1}, but TeX fully expands the
- % argument to \message. Therefore, if #1 contained @-commands, TeX
- % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
- % expanded @cite (which turns out to cause errors because \cite is meant
- % to be executed, not expanded).
- %
- % Anyway, we don't want the fully-expanded definition of @cite to appear
- % as a result of the \message, we just want `@cite' itself. We use
- % \the<toks register> to achieve this: TeX expands \the<toks> only once,
- % simply yielding the contents of <toks register>. (We also do this for
- % the toc entries.)
- \toks0 = {#1}%
- \message{(\the\toks0)}%
- %
- \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
- %
- \global\let\section = \unnumberedsec
- \global\let\subsection = \unnumberedsubsec
- \global\let\subsubsection = \unnumberedsubsubsec
-}
-
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\parseargdef\centerchap{%
- % Well, we could do the following in a group, but that would break
- % an assumption that \chapmacro is called at the outermost level.
- % Thus we are safer this way: --kasal, 24feb04
- \let\centerparametersmaybe = \centerparameters
- \unnmhead0{#1}%
- \let\centerparametersmaybe = \relax
-}
-
-% @top is like @unnumbered.
-\let\top\unnumbered
-
-% Sections.
-%
-\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
-\def\seczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
-}
-
-% normally calls appendixsectionzzz:
-\outer\parseargdef\appendixsection{\apphead1{#1}}
-\def\appendixsectionzzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
-}
-\let\appendixsec\appendixsection
-
-% normally calls unnumberedseczzz:
-\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
-\def\unnumberedseczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
-}
-
-% Subsections.
-%
-% normally calls numberedsubseczzz:
-\outer\parseargdef\numberedsubsec{\numhead2{#1}}
-\def\numberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
-}
-
-% normally calls appendixsubseczzz:
-\outer\parseargdef\appendixsubsec{\apphead2{#1}}
-\def\appendixsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Yappendix}%
- {\appendixletter.\the\secno.\the\subsecno}%
-}
-
-% normally calls unnumberedsubseczzz:
-\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
-\def\unnumberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno}%
-}
-
-% Subsubsections.
-%
-% normally numberedsubsubseczzz:
-\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
-\def\numberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynumbered}%
- {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-% normally appendixsubsubseczzz:
-\outer\parseargdef\appendixsubsubsec{\apphead3{#1}}
-\def\appendixsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Yappendix}%
- {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-% normally unnumberedsubsubseczzz:
-\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
-\def\unnumberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
-}
-
-% These macros control what the section commands do, according
-% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
-% Define them by default for a numbered chapter.
-\let\section = \numberedsec
-\let\subsection = \numberedsubsec
-\let\subsubsection = \numberedsubsubsec
-
-% Define @majorheading, @heading and @subheading
-
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-% 1) We use \vbox rather than the earlier \line to permit
-% overlong headings to fold.
-% 2) \hyphenpenalty is set to 10000 because hyphenation in a
-% heading is obnoxious; this forbids it.
-% 3) Likewise, headings look best if no \parindent is used, and
-% if justification is not attempted. Hence \raggedright.
-
-\def\majorheading{%
- {\advance\chapheadingskip by 10pt \chapbreak }%
- \parsearg\chapheadingzzz
-}
-
-\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
-\def\chapheadingzzz#1{%
- {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\ptexraggedright
- \rmisbold #1\hfill}}%
- \bigskip \par\penalty 200\relax
- \suppressfirstparagraphindent
-}
-
-% @heading, @subheading, @subsubheading.
-\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
- \suppressfirstparagraphindent}
-
-% These macros generate a chapter, section, etc. heading only
-% (including whitespace, linebreaking, etc. around it),
-% given all the information in convenient, parsed form.
-
-% Args are the skip and penalty (usually negative)
-\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-
-% Parameter controlling skip before chapter headings (if needed)
-\newskip\chapheadingskip
-
-% Define plain chapter starts, and page on/off switching for it.
-\def\chapbreak{\dobreak \chapheadingskip {-4000}}
-\def\chappager{\par\vfill\supereject}
-% Because \domark is called before \chapoddpage, the filler page will
-% get the headings for the next chapter, which is wrong. But we don't
-% care -- we just disable all headings on the filler page.
-\def\chapoddpage{%
- \chappager
- \ifodd\pageno \else
- \begingroup
- \headingsoff
- \null
- \chappager
- \endgroup
- \fi
-}
-
-\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
-
-\def\CHAPPAGoff{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chapbreak
-\global\let\pagealignmacro=\chappager}
-
-\def\CHAPPAGon{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chappager
-\global\let\pagealignmacro=\chappager
-\global\def\HEADINGSon{\HEADINGSsingle}}
-
-\def\CHAPPAGodd{%
-\global\let\contentsalignmacro = \chapoddpage
-\global\let\pchapsepmacro=\chapoddpage
-\global\let\pagealignmacro=\chapoddpage
-\global\def\HEADINGSon{\HEADINGSdouble}}
-
-\CHAPPAGon
-
-% Chapter opening.
-%
-% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
-% Yappendix, Yomitfromtoc), #3 the chapter number.
-%
-% To test against our argument.
-\def\Ynothingkeyword{Ynothing}
-\def\Yomitfromtockeyword{Yomitfromtoc}
-\def\Yappendixkeyword{Yappendix}
-%
-\def\chapmacro#1#2#3{%
- % Insert the first mark before the heading break (see notes for \domark).
- \let\prevchapterdefs=\lastchapterdefs
- \let\prevsectiondefs=\lastsectiondefs
- \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
- \gdef\thissection{}}%
- %
- \def\temptype{#2}%
- \ifx\temptype\Ynothingkeyword
- \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
- \gdef\thischapter{\thischaptername}}%
- \else\ifx\temptype\Yomitfromtockeyword
- \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
- \gdef\thischapter{}}%
- \else\ifx\temptype\Yappendixkeyword
- \toks0={#1}%
- \xdef\lastchapterdefs{%
- \gdef\noexpand\thischaptername{\the\toks0}%
- \gdef\noexpand\thischapternum{\appendixletter}%
- % \noexpand\putwordAppendix avoids expanding indigestible
- % commands in some of the translations.
- \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
- \noexpand\thischapternum:
- \noexpand\thischaptername}%
- }%
- \else
- \toks0={#1}%
- \xdef\lastchapterdefs{%
- \gdef\noexpand\thischaptername{\the\toks0}%
- \gdef\noexpand\thischapternum{\the\chapno}%
- % \noexpand\putwordChapter avoids expanding indigestible
- % commands in some of the translations.
- \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
- \noexpand\thischapternum:
- \noexpand\thischaptername}%
- }%
- \fi\fi\fi
- %
- % Output the mark. Pass it through \safewhatsit, to take care of
- % the preceding space.
- \safewhatsit\domark
- %
- % Insert the chapter heading break.
- \pchapsepmacro
- %
- % Now the second mark, after the heading break. No break points
- % between here and the heading.
- \let\prevchapterdefs=\lastchapterdefs
- \let\prevsectiondefs=\lastsectiondefs
- \domark
- %
- {%
- \chapfonts \rmisbold
- %
- % Have to define \lastsection before calling \donoderef, because the
- % xref code eventually uses it. On the other hand, it has to be called
- % after \pchapsepmacro, or the headline will change too soon.
- \gdef\lastsection{#1}%
- %
- % Only insert the separating space if we have a chapter/appendix
- % number, and don't print the unnumbered ``number''.
- \ifx\temptype\Ynothingkeyword
- \setbox0 = \hbox{}%
- \def\toctype{unnchap}%
- \else\ifx\temptype\Yomitfromtockeyword
- \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
- \def\toctype{omit}%
- \else\ifx\temptype\Yappendixkeyword
- \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
- \def\toctype{app}%
- \else
- \setbox0 = \hbox{#3\enspace}%
- \def\toctype{numchap}%
- \fi\fi\fi
- %
- % Write the toc entry for this chapter. Must come before the
- % \donoderef, because we include the current node name in the toc
- % entry, and \donoderef resets it to empty.
- \writetocentry{\toctype}{#1}{#3}%
- %
- % For pdftex, we have to write out the node definition (aka, make
- % the pdfdest) after any page break, but before the actual text has
- % been typeset. If the destination for the pdf outline is after the
- % text, then jumping from the outline may wind up with the text not
- % being visible, for instance under high magnification.
- \donoderef{#2}%
- %
- % Typeset the actual heading.
- \nobreak % Avoid page breaks at the interline glue.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
- \hangindent=\wd0 \centerparametersmaybe
- \unhbox0 #1\par}%
- }%
- \nobreak\bigskip % no page break after a chapter title
- \nobreak
-}
-
-% @centerchap -- centered and unnumbered.
-\let\centerparametersmaybe = \relax
-\def\centerparameters{%
- \advance\rightskip by 3\rightskip
- \leftskip = \rightskip
- \parfillskip = 0pt
-}
-
-
-% I don't think this chapter style is supported any more, so I'm not
-% updating it with the new noderef stuff. We'll see. --karl, 11aug03.
-%
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-%
-\def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\ptexraggedright
- \rmisbold #1\hfill}}\bigskip \par\nobreak
-}
-\def\chfopen #1#2{\chapoddpage {\chapfonts
-\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
-\par\penalty 5000 %
-}
-\def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt
- \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
-}
-\def\CHAPFopen{%
- \global\let\chapmacro=\chfopen
- \global\let\centerchapmacro=\centerchfopen}
-
-
-% Section titles. These macros combine the section number parts and
-% call the generic \sectionheading to do the printing.
-%
-\newskip\secheadingskip
-\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
-
-% Subsection titles.
-\newskip\subsecheadingskip
-\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
-
-% Subsubsection titles.
-\def\subsubsecheadingskip{\subsecheadingskip}
-\def\subsubsecheadingbreak{\subsecheadingbreak}
-
-
-% Print any size, any type, section title.
-%
-% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
-% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
-% section number.
-%
-\def\seckeyword{sec}
-%
-\def\sectionheading#1#2#3#4{%
- {%
- \checkenv{}% should not be in an environment.
- %
- % Switch to the right set of fonts.
- \csname #2fonts\endcsname \rmisbold
- %
- \def\sectionlevel{#2}%
- \def\temptype{#3}%
- %
- % Insert first mark before the heading break (see notes for \domark).
- \let\prevsectiondefs=\lastsectiondefs
- \ifx\temptype\Ynothingkeyword
- \ifx\sectionlevel\seckeyword
- \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
- \gdef\thissection{\thissectionname}}%
- \fi
- \else\ifx\temptype\Yomitfromtockeyword
- % Don't redefine \thissection.
- \else\ifx\temptype\Yappendixkeyword
- \ifx\sectionlevel\seckeyword
- \toks0={#1}%
- \xdef\lastsectiondefs{%
- \gdef\noexpand\thissectionname{\the\toks0}%
- \gdef\noexpand\thissectionnum{#4}%
- % \noexpand\putwordSection avoids expanding indigestible
- % commands in some of the translations.
- \gdef\noexpand\thissection{\noexpand\putwordSection{}
- \noexpand\thissectionnum:
- \noexpand\thissectionname}%
- }%
- \fi
- \else
- \ifx\sectionlevel\seckeyword
- \toks0={#1}%
- \xdef\lastsectiondefs{%
- \gdef\noexpand\thissectionname{\the\toks0}%
- \gdef\noexpand\thissectionnum{#4}%
- % \noexpand\putwordSection avoids expanding indigestible
- % commands in some of the translations.
- \gdef\noexpand\thissection{\noexpand\putwordSection{}
- \noexpand\thissectionnum:
- \noexpand\thissectionname}%
- }%
- \fi
- \fi\fi\fi
- %
- % Go into vertical mode. Usually we'll already be there, but we
- % don't want the following whatsit to end up in a preceding paragraph
- % if the document didn't happen to have a blank line.
- \par
- %
- % Output the mark. Pass it through \safewhatsit, to take care of
- % the preceding space.
- \safewhatsit\domark
- %
- % Insert space above the heading.
- \csname #2headingbreak\endcsname
- %
- % Now the second mark, after the heading break. No break points
- % between here and the heading.
- \let\prevsectiondefs=\lastsectiondefs
- \domark
- %
- % Only insert the space after the number if we have a section number.
- \ifx\temptype\Ynothingkeyword
- \setbox0 = \hbox{}%
- \def\toctype{unn}%
- \gdef\lastsection{#1}%
- \else\ifx\temptype\Yomitfromtockeyword
- % for @headings -- no section number, don't include in toc,
- % and don't redefine \lastsection.
- \setbox0 = \hbox{}%
- \def\toctype{omit}%
- \let\sectionlevel=\empty
- \else\ifx\temptype\Yappendixkeyword
- \setbox0 = \hbox{#4\enspace}%
- \def\toctype{app}%
- \gdef\lastsection{#1}%
- \else
- \setbox0 = \hbox{#4\enspace}%
- \def\toctype{num}%
- \gdef\lastsection{#1}%
- \fi\fi\fi
- %
- % Write the toc entry (before \donoderef). See comments in \chapmacro.
- \writetocentry{\toctype\sectionlevel}{#1}{#4}%
- %
- % Write the node reference (= pdf destination for pdftex).
- % Again, see comments in \chapmacro.
- \donoderef{#3}%
- %
- % Interline glue will be inserted when the vbox is completed.
- % That glue will be a valid breakpoint for the page, since it'll be
- % preceded by a whatsit (usually from the \donoderef, or from the
- % \writetocentry if there was no node). We don't want to allow that
- % break, since then the whatsits could end up on page n while the
- % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000.
- \nobreak
- %
- % Output the actual section heading.
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
- \hangindent=\wd0 % zero if no section number
- \unhbox0 #1}%
- }%
- % Add extra space after the heading -- half of whatever came above it.
- % Don't allow stretch, though.
- \kern .5 \csname #2headingskip\endcsname
- %
- % Do not let the kern be a potential breakpoint, as it would be if it
- % was followed by glue.
- \nobreak
- %
- % We'll almost certainly start a paragraph next, so don't let that
- % glue accumulate. (Not a breakpoint because it's preceded by a
- % discardable item.) However, when a paragraph is not started next
- % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
- % or the negative glue will cause weirdly wrong output, typically
- % obscuring the section heading with something else.
- \vskip-\parskip
- %
- % This is so the last item on the main vertical list is a known
- % \penalty > 10000, so \startdefun, etc., can recognize the situation
- % and do the needful.
- \penalty 10001
-}
-
-
-\message{toc,}
-% Table of contents.
-\newwrite\tocfile
-
-% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc.
-%
-% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
-% We append the current node name (if any) and page number as additional
-% arguments for the \{chap,sec,...}entry macros which will eventually
-% read this. The node name is used in the pdf outlines as the
-% destination to jump to.
-%
-% We open the .toc file for writing here instead of at @setfilename (or
-% any other fixed time) so that @contents can be anywhere in the document.
-% But if #1 is `omit', then we don't do anything. This is used for the
-% table of contents chapter openings themselves.
-%
-\newif\iftocfileopened
-\def\omitkeyword{omit}%
-%
-\def\writetocentry#1#2#3{%
- \edef\writetoctype{#1}%
- \ifx\writetoctype\omitkeyword \else
- \iftocfileopened\else
- \immediate\openout\tocfile = \jobname.toc
- \global\tocfileopenedtrue
- \fi
- %
- \iflinks
- {\atdummies
- \edef\temp{%
- \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
- \temp
- }%
- \fi
- \fi
- %
- % Tell \shipout to create a pdf destination on each page, if we're
- % writing pdf. These are used in the table of contents. We can't
- % just write one on every page because the title pages are numbered
- % 1 and 2 (the page numbers aren't printed), and so are the first
- % two pages of the document. Thus, we'd have two destinations named
- % `1', and two named `2'.
- \ifpdf \global\pdfmakepagedesttrue \fi
-}
-
-
-% These characters do not print properly in the Computer Modern roman
-% fonts, so we must take special care. This is more or less redundant
-% with the Texinfo input format setup at the end of this file.
-%
-\def\activecatcodes{%
- \catcode`\"=\active
- \catcode`\$=\active
- \catcode`\<=\active
- \catcode`\>=\active
- \catcode`\\=\active
- \catcode`\^=\active
- \catcode`\_=\active
- \catcode`\|=\active
- \catcode`\~=\active
-}
-
-
-% Read the toc file, which is essentially Texinfo input.
-\def\readtocfile{%
- \setupdatafile
- \activecatcodes
- \input \tocreadfilename
-}
-
-\newskip\contentsrightmargin \contentsrightmargin=1in
-\newcount\savepageno
-\newcount\lastnegativepageno \lastnegativepageno = -1
-
-% Prepare to read what we've written to \tocfile.
-%
-\def\startcontents#1{%
- % If @setchapternewpage on, and @headings double, the contents should
- % start on an odd page, unlike chapters. Thus, we maintain
- % \contentsalignmacro in parallel with \pagealignmacro.
- % From: Torbjorn Granlund <tege@matematik.su.se>
- \contentsalignmacro
- \immediate\closeout\tocfile
- %
- % Don't need to put `Contents' or `Short Contents' in the headline.
- % It is abundantly clear what they are.
- \chapmacro{#1}{Yomitfromtoc}{}%
- %
- \savepageno = \pageno
- \begingroup % Set up to handle contents files properly.
- \raggedbottom % Worry more about breakpoints than the bottom.
- \advance\hsize by -\contentsrightmargin % Don't use the full line length.
- %
- % Roman numerals for page numbers.
- \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
-}
-
-% redefined for the two-volume lispref. We always output on
-% \jobname.toc even if this is redefined.
-%
-\def\tocreadfilename{\jobname.toc}
-
-% Normal (long) toc.
-%
-\def\contents{%
- \startcontents{\putwordTOC}%
- \openin 1 \tocreadfilename\space
- \ifeof 1 \else
- \readtocfile
- \fi
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \ifeof 1 \else
- \pdfmakeoutlines
- \fi
- \closein 1
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
-}
-
-% And just the chapters.
-\def\summarycontents{%
- \startcontents{\putwordShortTOC}%
- %
- \let\partentry = \shortpartentry
- \let\numchapentry = \shortchapentry
- \let\appentry = \shortchapentry
- \let\unnchapentry = \shortunnchapentry
- % We want a true roman here for the page numbers.
- \secfonts
- \let\rm=\shortcontrm \let\bf=\shortcontbf
- \let\sl=\shortcontsl \let\tt=\shortconttt
- \rm
- \hyphenpenalty = 10000
- \advance\baselineskip by 1pt % Open it up a little.
- \def\numsecentry##1##2##3##4{}
- \let\appsecentry = \numsecentry
- \let\unnsecentry = \numsecentry
- \let\numsubsecentry = \numsecentry
- \let\appsubsecentry = \numsecentry
- \let\unnsubsecentry = \numsecentry
- \let\numsubsubsecentry = \numsecentry
- \let\appsubsubsecentry = \numsecentry
- \let\unnsubsubsecentry = \numsecentry
- \openin 1 \tocreadfilename\space
- \ifeof 1 \else
- \readtocfile
- \fi
- \closein 1
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \endgroup
- \lastnegativepageno = \pageno
- \global\pageno = \savepageno
-}
-\let\shortcontents = \summarycontents
-
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
-%
-\def\shortchaplabel#1{%
- % This space should be enough, since a single number is .5em, and the
- % widest letter (M) is 1em, at least in the Computer Modern fonts.
- % But use \hss just in case.
- % (This space doesn't include the extra space that gets added after
- % the label; that gets put in by \shortchapentry above.)
- %
- % We'd like to right-justify chapter numbers, but that looks strange
- % with appendix letters. And right-justifying numbers and
- % left-justifying letters looks strange when there is less than 10
- % chapters. Have to read the whole toc once to know how many chapters
- % there are before deciding ...
- \hbox to 1em{#1\hss}%
-}
-
-% These macros generate individual entries in the table of contents.
-% The first argument is the chapter or section name.
-% The last argument is the page number.
-% The arguments in between are the chapter number, section number, ...
-
-% Parts, in the main contents. Replace the part number, which doesn't
-% exist, with an empty box. Let's hope all the numbers have the same width.
-% Also ignore the page number, which is conventionally not printed.
-\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
-\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}}
-%
-% Parts, in the short toc.
-\def\shortpartentry#1#2#3#4{%
- \penalty-300
- \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip
- \shortchapentry{{\bf #1}}{\numeralbox}{}{}%
-}
-
-% Chapters, in the main contents.
-\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
-%
-% Chapters, in the short toc.
-% See comments in \dochapentry re vbox and related settings.
-\def\shortchapentry#1#2#3#4{%
- \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
-}
-
-% Appendices, in the main contents.
-% Need the word Appendix, and a fixed-size box.
-%
-\def\appendixbox#1{%
- % We use M since it's probably the widest letter.
- \setbox0 = \hbox{\putwordAppendix{} M}%
- \hbox to \wd0{\putwordAppendix{} #1\hss}}
-%
-\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
-
-% Unnumbered chapters.
-\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
-\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
-
-% Sections.
-\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
-\let\appsecentry=\numsecentry
-\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
-
-% Subsections.
-\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsecentry=\numsubsecentry
-\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
-
-% And subsubsections.
-\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
-\let\appsubsubsecentry=\numsubsubsecentry
-\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
-
-% This parameter controls the indentation of the various levels.
-% Same as \defaultparindent.
-\newdimen\tocindent \tocindent = 15pt
-
-% Now for the actual typesetting. In all these, #1 is the text and #2 is the
-% page number.
-%
-% If the toc has to be broken over pages, we want it to be at chapters
-% if at all possible; hence the \penalty.
-\def\dochapentry#1#2{%
- \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
- \begingroup
- \chapentryfonts
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
- \endgroup
- \nobreak\vskip .25\baselineskip plus.1\baselineskip
-}
-
-\def\dosecentry#1#2{\begingroup
- \secentryfonts \leftskip=\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsecentry#1#2{\begingroup
- \subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsubsecentry#1#2{\begingroup
- \subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-% We use the same \entry macro as for the index entries.
-\let\tocentry = \entry
-
-% Space between chapter (or whatever) number and the title.
-\def\labelspace{\hskip1em \relax}
-
-\def\dopageno#1{{\rm #1}}
-\def\doshortpageno#1{{\rm #1}}
-
-\def\chapentryfonts{\secfonts \rm}
-\def\secentryfonts{\textfonts}
-\def\subsecentryfonts{\textfonts}
-\def\subsubsecentryfonts{\textfonts}
-
-
-\message{environments,}
-% @foo ... @end foo.
-
-% @tex ... @end tex escapes into raw TeX temporarily.
-% One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain @ character.
-
-\envdef\tex{%
- \setupmarkupstyle{tex}%
- \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
- \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
- \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
- \catcode `\%=14
- \catcode `\+=\other
- \catcode `\"=\other
- \catcode `\|=\other
- \catcode `\<=\other
- \catcode `\>=\other
- \catcode`\`=\other
- \catcode`\'=\other
- \escapechar=`\\
- %
- % ' is active in math mode (mathcode"8000). So reset it, and all our
- % other math active characters (just in case), to plain's definitions.
- \mathactive
- %
- \let\b=\ptexb
- \let\bullet=\ptexbullet
- \let\c=\ptexc
- \let\,=\ptexcomma
- \let\.=\ptexdot
- \let\dots=\ptexdots
- \let\equiv=\ptexequiv
- \let\!=\ptexexclam
- \let\i=\ptexi
- \let\indent=\ptexindent
- \let\noindent=\ptexnoindent
- \let\{=\ptexlbrace
- \let\+=\tabalign
- \let\}=\ptexrbrace
- \let\/=\ptexslash
- \let\*=\ptexstar
- \let\t=\ptext
- \expandafter \let\csname top\endcsname=\ptextop % outer
- \let\frenchspacing=\plainfrenchspacing
- %
- \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
- \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
- \def\@{@}%
-}
-% There is no need to define \Etex.
-
-% Define @lisp ... @end lisp.
-% @lisp environment forms a group so it can rebind things,
-% including the definition of @end lisp (which normally is erroneous).
-
-% Amount to narrow the margins by for @lisp.
-\newskip\lispnarrowing \lispnarrowing=0.4in
-
-% This is the definition that ^^M gets inside @lisp, @example, and other
-% such environments. \null is better than a space, since it doesn't
-% have any width.
-\def\lisppar{\null\endgraf}
-
-% This space is always present above and below environments.
-\newskip\envskipamount \envskipamount = 0pt
-
-% Make spacing and below environment symmetrical. We use \parskip here
-% to help in doing that, since in @example-like environments \parskip
-% is reset to zero; thus the \afterenvbreak inserts no space -- but the
-% start of the next paragraph will insert \parskip.
-%
-\def\aboveenvbreak{{%
- % =10000 instead of <10000 because of a special case in \itemzzz and
- % \sectionheading, q.v.
- \ifnum \lastpenalty=10000 \else
- \advance\envskipamount by \parskip
- \endgraf
- \ifdim\lastskip<\envskipamount
- \removelastskip
- % it's not a good place to break if the last penalty was \nobreak
- % or better ...
- \ifnum\lastpenalty<10000 \penalty-50 \fi
- \vskip\envskipamount
- \fi
- \fi
-}}
-
-\let\afterenvbreak = \aboveenvbreak
-
-% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will
-% also clear it, so that its embedded environments do the narrowing again.
-\let\nonarrowing=\relax
-
-% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
-% environment contents.
-\font\circle=lcircle10
-\newdimen\circthick
-\newdimen\cartouter\newdimen\cartinner
-\newskip\normbskip\newskip\normpskip\newskip\normlskip
-\circthick=\fontdimen8\circle
-%
-\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
-\def\ctr{{\hskip 6pt\circle\char'010}}
-\def\cbl{{\circle\char'012\hskip -6pt}}
-\def\cbr{{\hskip 6pt\circle\char'011}}
-\def\carttop{\hbox to \cartouter{\hskip\lskip
- \ctl\leaders\hrule height\circthick\hfil\ctr
- \hskip\rskip}}
-\def\cartbot{\hbox to \cartouter{\hskip\lskip
- \cbl\leaders\hrule height\circthick\hfil\cbr
- \hskip\rskip}}
-%
-\newskip\lskip\newskip\rskip
-
-\envdef\cartouche{%
- \ifhmode\par\fi % can't be in the midst of a paragraph.
- \startsavinginserts
- \lskip=\leftskip \rskip=\rightskip
- \leftskip=0pt\rightskip=0pt % we want these *outside*.
- \cartinner=\hsize \advance\cartinner by-\lskip
- \advance\cartinner by-\rskip
- \cartouter=\hsize
- \advance\cartouter by 18.4pt % allow for 3pt kerns on either
- % side, and for 6pt waste from
- % each corner char, and rule thickness
- \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing = t%
- %
- % If this cartouche directly follows a sectioning command, we need the
- % \parskip glue (backspaced over by default) or the cartouche can
- % collide with the section heading.
- \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
- %
- \vbox\bgroup
- \baselineskip=0pt\parskip=0pt\lineskip=0pt
- \carttop
- \hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \kern3pt
- \hsize=\cartinner
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
- \comment % For explanation, see the end of def\group.
-}
-\def\Ecartouche{%
- \ifhmode\par\fi
- \kern3pt
- \egroup
- \kern3pt\vrule
- \hskip\rskip
- \egroup
- \cartbot
- \egroup
- \checkinserts
-}
-
-
-% This macro is called at the beginning of all the @example variants,
-% inside a group.
-\newdimen\nonfillparindent
-\def\nonfillstart{%
- \aboveenvbreak
- \hfuzz = 12pt % Don't be fussy
- \sepspaces % Make spaces be word-separators rather than space tokens.
- \let\par = \lisppar % don't ignore blank lines
- \obeylines % each line of input is a line of output
- \parskip = 0pt
- % Turn off paragraph indentation but redefine \indent to emulate
- % the normal \indent.
- \nonfillparindent=\parindent
- \parindent = 0pt
- \let\indent\nonfillindent
- %
- \emergencystretch = 0pt % don't try to avoid overfull boxes
- \ifx\nonarrowing\relax
- \advance \leftskip by \lispnarrowing
- \exdentamount=\lispnarrowing
- \else
- \let\nonarrowing = \relax
- \fi
- \let\exdent=\nofillexdent
-}
-
-\begingroup
-\obeyspaces
-% We want to swallow spaces (but not other tokens) after the fake
-% @indent in our nonfill-environments, where spaces are normally
-% active and set to @tie, resulting in them not being ignored after
-% @indent.
-\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
-\gdef\nonfillindentcheck{%
-\ifx\temp %
-\expandafter\nonfillindentgobble%
-\else%
-\leavevmode\nonfillindentbox%
-\fi%
-}%
-\endgroup
-\def\nonfillindentgobble#1{\nonfillindent}
-\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
-
-% If you want all examples etc. small: @set dispenvsize small.
-% If you want even small examples the full size: @set dispenvsize nosmall.
-% This affects the following displayed environments:
-% @example, @display, @format, @lisp
-%
-\def\smallword{small}
-\def\nosmallword{nosmall}
-\let\SETdispenvsize\relax
-\def\setnormaldispenv{%
- \ifx\SETdispenvsize\smallword
- % end paragraph for sake of leading, in case document has no blank
- % line. This is redundant with what happens in \aboveenvbreak, but
- % we need to do it before changing the fonts, and it's inconvenient
- % to change the fonts afterward.
- \ifnum \lastpenalty=10000 \else \endgraf \fi
- \smallexamplefonts \rm
- \fi
-}
-\def\setsmalldispenv{%
- \ifx\SETdispenvsize\nosmallword
- \else
- \ifnum \lastpenalty=10000 \else \endgraf \fi
- \smallexamplefonts \rm
- \fi
-}
-
-% We often define two environments, @foo and @smallfoo.
-% Let's do it in one command. #1 is the env name, #2 the definition.
-\def\makedispenvdef#1#2{%
- \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}%
- \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}%
- \expandafter\let\csname E#1\endcsname \afterenvbreak
- \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
-}
-
-% Define two environment synonyms (#1 and #2) for an environment.
-\def\maketwodispenvdef#1#2#3{%
- \makedispenvdef{#1}{#3}%
- \makedispenvdef{#2}{#3}%
-}
-%
-% @lisp: indented, narrowed, typewriter font;
-% @example: same as @lisp.
-%
-% @smallexample and @smalllisp: use smaller fonts.
-% Originally contributed by Pavel@xerox.
-%
-\maketwodispenvdef{lisp}{example}{%
- \nonfillstart
- \tt\setupmarkupstyle{example}%
- \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
- \gobble % eat return
-}
-% @display/@smalldisplay: same as @lisp except keep current font.
-%
-\makedispenvdef{display}{%
- \nonfillstart
- \gobble
-}
-
-% @format/@smallformat: same as @display except don't narrow margins.
-%
-\makedispenvdef{format}{%
- \let\nonarrowing = t%
- \nonfillstart
- \gobble
-}
-
-% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
-\envdef\flushleft{%
- \let\nonarrowing = t%
- \nonfillstart
- \gobble
-}
-\let\Eflushleft = \afterenvbreak
-
-% @flushright.
-%
-\envdef\flushright{%
- \let\nonarrowing = t%
- \nonfillstart
- \advance\leftskip by 0pt plus 1fill\relax
- \gobble
-}
-\let\Eflushright = \afterenvbreak
-
-
-% @raggedright does more-or-less normal line breaking but no right
-% justification. From plain.tex.
-\envdef\raggedright{%
- \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax
-}
-\let\Eraggedright\par
-
-\envdef\raggedleft{%
- \parindent=0pt \leftskip0pt plus2em
- \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
- \hbadness=10000 % Last line will usually be underfull, so turn off
- % badness reporting.
-}
-\let\Eraggedleft\par
-
-\envdef\raggedcenter{%
- \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
- \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
- \hbadness=10000 % Last line will usually be underfull, so turn off
- % badness reporting.
-}
-\let\Eraggedcenter\par
-
-
-% @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins. We keep \parskip nonzero in general, since
-% we're doing normal filling. So, when using \aboveenvbreak and
-% \afterenvbreak, temporarily make \parskip 0.
-%
-\makedispenvdef{quotation}{\quotationstart}
-%
-\def\quotationstart{%
- {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
- \parindent=0pt
- %
- % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
- \ifx\nonarrowing\relax
- \advance\leftskip by \lispnarrowing
- \advance\rightskip by \lispnarrowing
- \exdentamount = \lispnarrowing
- \else
- \let\nonarrowing = \relax
- \fi
- \parsearg\quotationlabel
-}
-
-% We have retained a nonzero parskip for the environment, since we're
-% doing normal filling.
-%
-\def\Equotation{%
- \par
- \ifx\quotationauthor\thisisundefined\else
- % indent a bit.
- \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
- \fi
- {\parskip=0pt \afterenvbreak}%
-}
-\def\Esmallquotation{\Equotation}
-
-% If we're given an argument, typeset it in bold with a colon after.
-\def\quotationlabel#1{%
- \def\temp{#1}%
- \ifx\temp\empty \else
- {\bf #1: }%
- \fi
-}
-
-
-% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
-% If we want to allow any <char> as delimiter,
-% we need the curly braces so that makeinfo sees the @verb command, eg:
-% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
-%
-% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
-%
-% [Knuth] p.344; only we need to do the other characters Texinfo sets
-% active too. Otherwise, they get lost as the first character on a
-% verbatim line.
-\def\dospecials{%
- \do\ \do\\\do\{\do\}\do\$\do\&%
- \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
- \do\<\do\>\do\|\do\@\do+\do\"%
- % Don't do the quotes -- if we do, @set txicodequoteundirected and
- % @set txicodequotebacktick will not have effect on @verb and
- % @verbatim, and ?` and !` ligatures won't get disabled.
- %\do\`\do\'%
-}
-%
-% [Knuth] p. 380
-\def\uncatcodespecials{%
- \def\do##1{\catcode`##1=\other}\dospecials}
-%
-% Setup for the @verb command.
-%
-% Eight spaces for a tab
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
-\endgroup
-%
-\def\setupverb{%
- \tt % easiest (and conventionally used) font for verbatim
- \def\par{\leavevmode\endgraf}%
- \setupmarkupstyle{verb}%
- \tabeightspaces
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count
- % must do in this order:
- \obeylines \uncatcodespecials \sepspaces
-}
-
-% Setup for the @verbatim environment
-%
-% Real tab expansion.
-\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
-%
-% We typeset each line of the verbatim in an \hbox, so we can handle
-% tabs. The \global is in case the verbatim line starts with an accent,
-% or some other command that starts with a begin-group. Otherwise, the
-% entire \verbbox would disappear at the corresponding end-group, before
-% it is typeset. Meanwhile, we can't have nested verbatim commands
-% (can we?), so the \global won't be overwriting itself.
-\newbox\verbbox
-\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup}
-%
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabexpand{%
- \catcode`\^^I=\active
- \def^^I{\leavevmode\egroup
- \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab
- \divide\dimen\verbbox by\tabw
- \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw
- \advance\dimen\verbbox by\tabw % advance to next multiple of \tabw
- \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox
- }%
- }
-\endgroup
-
-% start the verbatim environment.
-\def\setupverbatim{%
- \let\nonarrowing = t%
- \nonfillstart
- \tt % easiest (and conventionally used) font for verbatim
- % The \leavevmode here is for blank lines. Otherwise, we would
- % never \starttabox and the \egroup would end verbatim mode.
- \def\par{\leavevmode\egroup\box\verbbox\endgraf}%
- \tabexpand
- \setupmarkupstyle{verbatim}%
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count.
- % Must do in this order:
- \obeylines \uncatcodespecials \sepspaces
- \everypar{\starttabbox}%
-}
-
-% Do the @verb magic: verbatim text is quoted by unique
-% delimiter characters. Before first delimiter expect a
-% right brace, after last delimiter expect closing brace:
-%
-% \def\doverb'{'<char>#1<char>'}'{#1}
-%
-% [Knuth] p. 382; only eat outer {}
-\begingroup
- \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
- \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
-\endgroup
-%
-\def\verb{\begingroup\setupverb\doverb}
-%
-%
-% Do the @verbatim magic: define the macro \doverbatim so that
-% the (first) argument ends when '@end verbatim' is reached, ie:
-%
-% \def\doverbatim#1@end verbatim{#1}
-%
-% For Texinfo it's a lot easier than for LaTeX,
-% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
-% we need not redefine '\', '{' and '}'.
-%
-% Inspired by LaTeX's verbatim command set [latex.ltx]
-%
-\begingroup
- \catcode`\ =\active
- \obeylines %
- % ignore everything up to the first ^^M, that's the newline at the end
- % of the @verbatim input line itself. Otherwise we get an extra blank
- % line in the output.
- \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
- % We really want {...\end verbatim} in the body of the macro, but
- % without the active space; thus we have to use \xdef and \gobble.
-\endgroup
-%
-\envdef\verbatim{%
- \setupverbatim\doverbatim
-}
-\let\Everbatim = \afterenvbreak
-
-
-% @verbatiminclude FILE - insert text of file in verbatim environment.
-%
-\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
-%
-\def\doverbatiminclude#1{%
- {%
- \makevalueexpandable
- \setupverbatim
- \indexnofonts % Allow `@@' and other weird things in file names.
- \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}%
- \input #1
- \afterenvbreak
- }%
-}
-
-% @copying ... @end copying.
-% Save the text away for @insertcopying later.
-%
-% We save the uninterpreted tokens, rather than creating a box.
-% Saving the text in a box would be much easier, but then all the
-% typesetting commands (@smallbook, font changes, etc.) have to be done
-% beforehand -- and a) we want @copying to be done first in the source
-% file; b) letting users define the frontmatter in as flexible order as
-% possible is very desirable.
-%
-\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
-\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
-%
-\def\insertcopying{%
- \begingroup
- \parindent = 0pt % paragraph indentation looks wrong on title page
- \scanexp\copyingtext
- \endgroup
-}
-
-
-\message{defuns,}
-% @defun etc.
-
-\newskip\defbodyindent \defbodyindent=.4in
-\newskip\defargsindent \defargsindent=50pt
-\newskip\deflastargmargin \deflastargmargin=18pt
-\newcount\defunpenalty
-
-% Start the processing of @deffn:
-\def\startdefun{%
- \ifnum\lastpenalty<10000
- \medbreak
- \defunpenalty=10003 % Will keep this @deffn together with the
- % following @def command, see below.
- \else
- % If there are two @def commands in a row, we'll have a \nobreak,
- % which is there to keep the function description together with its
- % header. But if there's nothing but headers, we need to allow a
- % break somewhere. Check specifically for penalty 10002, inserted
- % by \printdefunline, instead of 10000, since the sectioning
- % commands also insert a nobreak penalty, and we don't want to allow
- % a break between a section heading and a defun.
- %
- % As a further refinement, we avoid "club" headers by signalling
- % with penalty of 10003 after the very first @deffn in the
- % sequence (see above), and penalty of 10002 after any following
- % @def command.
- \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
- %
- % Similarly, after a section heading, do not allow a break.
- % But do insert the glue.
- \medskip % preceded by discardable penalty, so not a breakpoint
- \fi
- %
- \parindent=0in
- \advance\leftskip by \defbodyindent
- \exdentamount=\defbodyindent
-}
-
-\def\dodefunx#1{%
- % First, check whether we are in the right environment:
- \checkenv#1%
- %
- % As above, allow line break if we have multiple x headers in a row.
- % It's not a great place, though.
- \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
- %
- % And now, it's time to reuse the body of the original defun:
- \expandafter\gobbledefun#1%
-}
-\def\gobbledefun#1\startdefun{}
-
-% \printdefunline \deffnheader{text}
-%
-\def\printdefunline#1#2{%
- \begingroup
- % call \deffnheader:
- #1#2 \endheader
- % common ending:
- \interlinepenalty = 10000
- \advance\rightskip by 0pt plus 1fil\relax
- \endgraf
- \nobreak\vskip -\parskip
- \penalty\defunpenalty % signal to \startdefun and \dodefunx
- % Some of the @defun-type tags do not enable magic parentheses,
- % rendering the following check redundant. But we don't optimize.
- \checkparencounts
- \endgroup
-}
-
-\def\Edefun{\endgraf\medbreak}
-
-% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
-% the only thing remaining is to define \deffnheader.
-%
-\def\makedefun#1{%
- \expandafter\let\csname E#1\endcsname = \Edefun
- \edef\temp{\noexpand\domakedefun
- \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
- \temp
-}
-
-% \domakedefun \deffn \deffnx \deffnheader
-%
-% Define \deffn and \deffnx, without parameters.
-% \deffnheader has to be defined explicitly.
-%
-\def\domakedefun#1#2#3{%
- \envdef#1{%
- \startdefun
- \doingtypefnfalse % distinguish typed functions from all else
- \parseargusing\activeparens{\printdefunline#3}%
- }%
- \def#2{\dodefunx#1}%
- \def#3%
-}
-
-\newif\ifdoingtypefn % doing typed function?
-\newif\ifrettypeownline % typeset return type on its own line?
-
-% @deftypefnnewline on|off says whether the return type of typed functions
-% are printed on their own line. This affects @deftypefn, @deftypefun,
-% @deftypeop, and @deftypemethod.
-%
-\parseargdef\deftypefnnewline{%
- \def\temp{#1}%
- \ifx\temp\onword
- \expandafter\let\csname SETtxideftypefnnl\endcsname
- = \empty
- \else\ifx\temp\offword
- \expandafter\let\csname SETtxideftypefnnl\endcsname
- = \relax
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @txideftypefnnl value `\temp',
- must be on|off}%
- \fi\fi
-}
-
-% Untyped functions:
-
-% @deffn category name args
-\makedefun{deffn}{\deffngeneral{}}
-
-% @deffn category class name args
-\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
-
-% \defopon {category on}class name args
-\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-
-% \deffngeneral {subind}category name args
-%
-\def\deffngeneral#1#2 #3 #4\endheader{%
- % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
- \dosubind{fn}{\code{#3}}{#1}%
- \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
-}
-
-% Typed functions:
-
-% @deftypefn category type name args
-\makedefun{deftypefn}{\deftypefngeneral{}}
-
-% @deftypeop category class type name args
-\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
-
-% \deftypeopon {category on}class type name args
-\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-
-% \deftypefngeneral {subind}category type name args
-%
-\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
- \dosubind{fn}{\code{#4}}{#1}%
- \doingtypefntrue
- \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
-}
-
-% Typed variables:
-
-% @deftypevr category type var args
-\makedefun{deftypevr}{\deftypecvgeneral{}}
-
-% @deftypecv category class type var args
-\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
-
-% \deftypecvof {category of}class type var args
-\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
-
-% \deftypecvgeneral {subind}category type var args
-%
-\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
- \dosubind{vr}{\code{#4}}{#1}%
- \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
-}
-
-% Untyped variables:
-
-% @defvr category var args
-\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
-
-% @defcv category class var args
-\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
-
-% \defcvof {category of}class var args
-\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
-
-% Types:
-
-% @deftp category name args
-\makedefun{deftp}#1 #2 #3\endheader{%
- \doind{tp}{\code{#2}}%
- \defname{#1}{}{#2}\defunargs{#3\unskip}%
-}
-
-% Remaining @defun-like shortcuts:
-\makedefun{defun}{\deffnheader{\putwordDeffunc} }
-\makedefun{defmac}{\deffnheader{\putwordDefmac} }
-\makedefun{defspec}{\deffnheader{\putwordDefspec} }
-\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
-\makedefun{defvar}{\defvrheader{\putwordDefvar} }
-\makedefun{defopt}{\defvrheader{\putwordDefopt} }
-\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
-\makedefun{defmethod}{\defopon\putwordMethodon}
-\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
-\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
-\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
-
-% \defname, which formats the name of the @def (not the args).
-% #1 is the category, such as "Function".
-% #2 is the return type, if any.
-% #3 is the function name.
-%
-% We are followed by (but not passed) the arguments, if any.
-%
-\def\defname#1#2#3{%
- \par
- % Get the values of \leftskip and \rightskip as they were outside the @def...
- \advance\leftskip by -\defbodyindent
- %
- % Determine if we are typesetting the return type of a typed function
- % on a line by itself.
- \rettypeownlinefalse
- \ifdoingtypefn % doing a typed function specifically?
- % then check user option for putting return type on its own line:
- \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
- \rettypeownlinetrue
- \fi
- \fi
- %
- % How we'll format the category name. Putting it in brackets helps
- % distinguish it from the body text that may end up on the next line
- % just below it.
- \def\temp{#1}%
- \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
- %
- % Figure out line sizes for the paragraph shape. We'll always have at
- % least two.
- \tempnum = 2
- %
- % The first line needs space for \box0; but if \rightskip is nonzero,
- % we need only space for the part of \box0 which exceeds it:
- \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip
- %
- % If doing a return type on its own line, we'll have another line.
- \ifrettypeownline
- \advance\tempnum by 1
- \def\maybeshapeline{0in \hsize}%
- \else
- \def\maybeshapeline{}%
- \fi
- %
- % The continuations:
- \dimen2=\hsize \advance\dimen2 by -\defargsindent
- %
- % The final paragraph shape:
- \parshape \tempnum 0in \dimen0 \maybeshapeline \defargsindent \dimen2
- %
- % Put the category name at the right margin.
- \noindent
- \hbox to 0pt{%
- \hfil\box0 \kern-\hsize
- % \hsize has to be shortened this way:
- \kern\leftskip
- % Intentionally do not respect \rightskip, since we need the space.
- }%
- %
- % Allow all lines to be underfull without complaint:
- \tolerance=10000 \hbadness=10000
- \exdentamount=\defbodyindent
- {%
- % defun fonts. We use typewriter by default (used to be bold) because:
- % . we're printing identifiers, they should be in tt in principle.
- % . in languages with many accents, such as Czech or French, it's
- % common to leave accents off identifiers. The result looks ok in
- % tt, but exceedingly strange in rm.
- % . we don't want -- and --- to be treated as ligatures.
- % . this still does not fix the ?` and !` ligatures, but so far no
- % one has made identifiers using them :).
- \df \tt
- \def\temp{#2}% text of the return type
- \ifx\temp\empty\else
- \tclose{\temp}% typeset the return type
- \ifrettypeownline
- % put return type on its own line; prohibit line break following:
- \hfil\vadjust{\nobreak}\break
- \else
- \space % type on same line, so just followed by a space
- \fi
- \fi % no return type
- #3% output function name
- }%
- {\rm\enskip}% hskip 0.5 em of \tenrm
- %
- \boldbrax
- % arguments will be output next, if any.
-}
-
-% Print arguments in slanted roman (not ttsl), inconsistently with using
-% tt for the name. This is because literal text is sometimes needed in
-% the argument list (groff manual), and ttsl and tt are not very
-% distinguishable. Prevent hyphenation at `-' chars.
-%
-\def\defunargs#1{%
- % use sl by default (not ttsl),
- % tt for the names.
- \df \sl \hyphenchar\font=0
- %
- % On the other hand, if an argument has two dashes (for instance), we
- % want a way to get ttsl. Let's try @var for that.
- \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
- #1%
- \sl\hyphenchar\font=45
-}
-
-% We want ()&[] to print specially on the defun line.
-%
-\def\activeparens{%
- \catcode`\(=\active \catcode`\)=\active
- \catcode`\[=\active \catcode`\]=\active
- \catcode`\&=\active
-}
-
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-% Be sure that we always have a definition for `(', etc. For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-{
- \activeparens
- \global\let(=\lparen \global\let)=\rparen
- \global\let[=\lbrack \global\let]=\rbrack
- \global\let& = \&
-
- \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
- \gdef\magicamp{\let&=\amprm}
-}
-
-\newcount\parencount
-
-% If we encounter &foo, then turn on ()-hacking afterwards
-\newif\ifampseen
-\def\amprm#1 {\ampseentrue{\bf\ }}
-
-\def\parenfont{%
- \ifampseen
- % At the first level, print parens in roman,
- % otherwise use the default font.
- \ifnum \parencount=1 \rm \fi
- \else
- % The \sf parens (in \boldbrax) actually are a little bolder than
- % the contained text. This is especially needed for [ and ] .
- \sf
- \fi
-}
-\def\infirstlevel#1{%
- \ifampseen
- \ifnum\parencount=1
- #1%
- \fi
- \fi
-}
-\def\bfafterword#1 {#1 \bf}
-
-\def\opnr{%
- \global\advance\parencount by 1
- {\parenfont(}%
- \infirstlevel \bfafterword
-}
-\def\clnr{%
- {\parenfont)}%
- \infirstlevel \sl
- \global\advance\parencount by -1
-}
-
-\newcount\brackcount
-\def\lbrb{%
- \global\advance\brackcount by 1
- {\bf[}%
-}
-\def\rbrb{%
- {\bf]}%
- \global\advance\brackcount by -1
-}
-
-\def\checkparencounts{%
- \ifnum\parencount=0 \else \badparencount \fi
- \ifnum\brackcount=0 \else \badbrackcount \fi
-}
-% these should not use \errmessage; the glibc manual, at least, actually
-% has such constructs (when documenting function pointers).
-\def\badparencount{%
- \message{Warning: unbalanced parentheses in @def...}%
- \global\parencount=0
-}
-\def\badbrackcount{%
- \message{Warning: unbalanced square brackets in @def...}%
- \global\brackcount=0
-}
-
-
-\message{macros,}
-% @macro.
-
-% To do this right we need a feature of e-TeX, \scantokens,
-% which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\thisisundefined
- \newwrite\macscribble
- \def\scantokens#1{%
- \toks0={#1}%
- \immediate\openout\macscribble=\jobname.tmp
- \immediate\write\macscribble{\the\toks0}%
- \immediate\closeout\macscribble
- \input \jobname.tmp
- }
-\fi
-
-\def\scanmacro#1{\begingroup
- \newlinechar`\^^M
- \let\xeatspaces\eatspaces
- %
- % Undo catcode changes of \startcontents and \doprintindex
- % When called from @insertcopying or (short)caption, we need active
- % backslash to get it printed correctly. Previously, we had
- % \catcode`\\=\other instead. We'll see whether a problem appears
- % with macro expansion. --kasal, 19aug04
- \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
- %
- % ... and for \example:
- \spaceisspace
- %
- % The \empty here causes a following catcode 5 newline to be eaten as
- % part of reading whitespace after a control sequence. It does not
- % eat a catcode 13 newline. There's no good way to handle the two
- % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX
- % would then have different behavior). See the Macro Details node in
- % the manual for the workaround we recommend for macros and
- % line-oriented commands.
- %
- \scantokens{#1\empty}%
-\endgroup}
-
-\def\scanexp#1{%
- \edef\temp{\noexpand\scanmacro{#1}}%
- \temp
-}
-
-\newcount\paramno % Count of parameters
-\newtoks\macname % Macro name
-\newif\ifrecursive % Is it recursive?
-
-% List of all defined macros in the form
-% \definedummyword\macro1\definedummyword\macro2...
-% Currently is also contains all @aliases; the list can be split
-% if there is a need.
-\def\macrolist{}
-
-% Add the macro to \macrolist
-\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
-\def\addtomacrolistxxx#1{%
- \toks0 = \expandafter{\macrolist\definedummyword#1}%
- \xdef\macrolist{\the\toks0}%
-}
-
-% Utility routines.
-% This does \let #1 = #2, with \csnames; that is,
-% \let \csname#1\endcsname = \csname#2\endcsname
-% (except of course we have to play expansion games).
-%
-\def\cslet#1#2{%
- \expandafter\let
- \csname#1\expandafter\endcsname
- \csname#2\endcsname
-}
-
-% Trim leading and trailing spaces off a string.
-% Concepts from aro-bend problem 15 (see CTAN).
-{\catcode`\@=11
-\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
-\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
-\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
-\def\unbrace#1{#1}
-\unbrace{\gdef\trim@@@ #1 } #2@{#1}
-}
-
-% Trim a single trailing ^^M off a string.
-{\catcode`\^^M=\other \catcode`\Q=3%
-\gdef\eatcr #1{\eatcra #1Q^^MQ}%
-\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
-\gdef\eatcrb#1Q#2Q{#1}%
-}
-
-% Macro bodies are absorbed as an argument in a context where
-% all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \
-% to recognize macro arguments; this is the job of \mbodybackslash.
-%
-% Non-ASCII encodings make 8-bit characters active, so un-activate
-% them to avoid their expansion. Must do this non-globally, to
-% confine the change to the current group.
-%
-% It's necessary to have hard CRs when the macro is executed. This is
-% done by making ^^M (\endlinechar) catcode 12 when reading the macro
-% body, and then making it the \newlinechar in \scanmacro.
-%
-\def\scanctxt{% used as subroutine
- \catcode`\"=\other
- \catcode`\+=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\@=\other
- \catcode`\^=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\~=\other
- \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
-}
-
-\def\scanargctxt{% used for copying and captions, not macros.
- \scanctxt
- \catcode`\\=\other
- \catcode`\^^M=\other
-}
-
-\def\macrobodyctxt{% used for @macro definitions
- \scanctxt
- \catcode`\{=\other
- \catcode`\}=\other
- \catcode`\^^M=\other
- \usembodybackslash
-}
-
-\def\macroargctxt{% used when scanning invocations
- \scanctxt
- \catcode`\\=0
-}
-% why catcode 0 for \ in the above? To recognize \\ \{ \} as "escapes"
-% for the single characters \ { }. Thus, we end up with the "commands"
-% that would be written @\ @{ @} in a Texinfo document.
-%
-% We already have @{ and @}. For @\, we define it here, and only for
-% this purpose, to produce a typewriter backslash (so, the @\ that we
-% define for @math can't be used with @macro calls):
-%
-\def\\{\normalbackslash}%
-%
-% We would like to do this for \, too, since that is what makeinfo does.
-% But it is not possible, because Texinfo already has a command @, for a
-% cedilla accent. Documents must use @comma{} instead.
-%
-% \anythingelse will almost certainly be an error of some kind.
-
-
-% \mbodybackslash is the definition of \ in @macro bodies.
-% It maps \foo\ => \csname macarg.foo\endcsname => #N
-% where N is the macro parameter number.
-% We define \csname macarg.\endcsname to be \realbackslash, so
-% \\ in macro replacement text gets you a backslash.
-%
-{\catcode`@=0 @catcode`@\=@active
- @gdef@usembodybackslash{@let\=@mbodybackslash}
- @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
-}
-\expandafter\def\csname macarg.\endcsname{\realbackslash}
-
-\def\margbackslash#1{\char`\#1 }
-
-\def\macro{\recursivefalse\parsearg\macroxxx}
-\def\rmacro{\recursivetrue\parsearg\macroxxx}
-
-\def\macroxxx#1{%
- \getargs{#1}% now \macname is the macname and \argl the arglist
- \ifx\argl\empty % no arguments
- \paramno=0\relax
- \else
- \expandafter\parsemargdef \argl;%
- \if\paramno>256\relax
- \ifx\eTeXversion\thisisundefined
- \errhelp = \EMsimple
- \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
- \fi
- \fi
- \fi
- \if1\csname ismacro.\the\macname\endcsname
- \message{Warning: redefining \the\macname}%
- \else
- \expandafter\ifx\csname \the\macname\endcsname \relax
- \else \errmessage{Macro name \the\macname\space already defined}\fi
- \global\cslet{macsave.\the\macname}{\the\macname}%
- \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
- \addtomacrolist{\the\macname}%
- \fi
- \begingroup \macrobodyctxt
- \ifrecursive \expandafter\parsermacbody
- \else \expandafter\parsemacbody
- \fi}
-
-\parseargdef\unmacro{%
- \if1\csname ismacro.#1\endcsname
- \global\cslet{#1}{macsave.#1}%
- \global\expandafter\let \csname ismacro.#1\endcsname=0%
- % Remove the macro name from \macrolist:
- \begingroup
- \expandafter\let\csname#1\endcsname \relax
- \let\definedummyword\unmacrodo
- \xdef\macrolist{\macrolist}%
- \endgroup
- \else
- \errmessage{Macro #1 not defined}%
- \fi
-}
-
-% Called by \do from \dounmacro on each macro. The idea is to omit any
-% macro definitions that have been changed to \relax.
-%
-\def\unmacrodo#1{%
- \ifx #1\relax
- % remove this
- \else
- \noexpand\definedummyword \noexpand#1%
- \fi
-}
-
-% This makes use of the obscure feature that if the last token of a
-% <parameter list> is #, then the preceding argument is delimited by
-% an opening brace, and that opening brace is not consumed.
-\def\getargs#1{\getargsxxx#1{}}
-\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname#1 #2\relax{\macname={#1}}
-\def\getmacargs#1{\def\argl{#1}}
-
-% For macro processing make @ a letter so that we can make Texinfo private macro names.
-\edef\texiatcatcode{\the\catcode`\@}
-\catcode `@=11\relax
-
-% Parse the optional {params} list. Set up \paramno and \paramlist
-% so \defmacro knows what to do. Define \macarg.BLAH for each BLAH
-% in the params list to some hook where the argument si to be expanded. If
-% there are less than 10 arguments that hook is to be replaced by ##N where N
-% is the position in that list, that is to say the macro arguments are to be
-% defined `a la TeX in the macro body.
-%
-% That gets used by \mbodybackslash (above).
-%
-% We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX: let \hash be something
-% unexpandable, insert that wherever you need a #, and then redefine
-% it to # just before using the token list produced.
-%
-% The same technique is used to protect \eatspaces till just before
-% the macro is used.
-%
-% If there are 10 or more arguments, a different technique is used, where the
-% hook remains in the body, and when macro is to be expanded the body is
-% processed again to replace the arguments.
-%
-% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
-% argument N value and then \edef the body (nothing else will expand because of
-% the catcode regime underwhich the body was input).
-%
-% If you compile with TeX (not eTeX), and you have macros with 10 or more
-% arguments, you need that no macro has more than 256 arguments, otherwise an
-% error is produced.
-\def\parsemargdef#1;{%
- \paramno=0\def\paramlist{}%
- \let\hash\relax
- \let\xeatspaces\relax
- \parsemargdefxxx#1,;,%
- % In case that there are 10 or more arguments we parse again the arguments
- % list to set new definitions for the \macarg.BLAH macros corresponding to
- % each BLAH argument. It was anyhow needed to parse already once this list
- % in order to count the arguments, and as macros with at most 9 arguments
- % are by far more frequent than macro with 10 or more arguments, defining
- % twice the \macarg.BLAH macros does not cost too much processing power.
- \ifnum\paramno<10\relax\else
- \paramno0\relax
- \parsemmanyargdef@@#1,;,% 10 or more arguments
- \fi
-}
-\def\parsemargdefxxx#1,{%
- \if#1;\let\next=\relax
- \else \let\next=\parsemargdefxxx
- \advance\paramno by 1
- \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
- {\xeatspaces{\hash\the\paramno}}%
- \edef\paramlist{\paramlist\hash\the\paramno,}%
- \fi\next}
-
-\def\parsemmanyargdef@@#1,{%
- \if#1;\let\next=\relax
- \else
- \let\next=\parsemmanyargdef@@
- \edef\tempb{\eatspaces{#1}}%
- \expandafter\def\expandafter\tempa
- \expandafter{\csname macarg.\tempb\endcsname}%
- % Note that we need some extra \noexpand\noexpand, this is because we
- % don't want \the to be expanded in the \parsermacbody as it uses an
- % \xdef .
- \expandafter\edef\tempa
- {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
- \advance\paramno by 1\relax
- \fi\next}
-
-% These two commands read recursive and nonrecursive macro bodies.
-% (They're different since rec and nonrec macros end differently.)
-%
-
-\catcode `\@\texiatcatcode
-\long\def\parsemacbody#1@end macro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-\long\def\parsermacbody#1@end rmacro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-\catcode `\@=11\relax
-
-\let\endargs@\relax
-\let\nil@\relax
-\def\nilm@{\nil@}%
-\long\def\nillm@{\nil@}%
-
-% This macro is expanded during the Texinfo macro expansion, not during its
-% definition. It gets all the arguments values and assigns them to macros
-% macarg.ARGNAME
-%
-% #1 is the macro name
-% #2 is the list of argument names
-% #3 is the list of argument values
-\def\getargvals@#1#2#3{%
- \def\macargdeflist@{}%
- \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
- \def\paramlist{#2,\nil@}%
- \def\macroname{#1}%
- \begingroup
- \macroargctxt
- \def\argvaluelist{#3,\nil@}%
- \def\@tempa{#3}%
- \ifx\@tempa\empty
- \setemptyargvalues@
- \else
- \getargvals@@
- \fi
-}
-
-%
-\def\getargvals@@{%
- \ifx\paramlist\nilm@
- % Some sanity check needed here that \argvaluelist is also empty.
- \ifx\argvaluelist\nillm@
- \else
- \errhelp = \EMsimple
- \errmessage{Too many arguments in macro `\macroname'!}%
- \fi
- \let\next\macargexpandinbody@
- \else
- \ifx\argvaluelist\nillm@
- % No more arguments values passed to macro. Set remaining named-arg
- % macros to empty.
- \let\next\setemptyargvalues@
- \else
- % pop current arg name into \@tempb
- \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
- \expandafter\@tempa\expandafter{\paramlist}%
- % pop current argument value into \@tempc
- \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
- \expandafter\@tempa\expandafter{\argvaluelist}%
- % Here \@tempb is the current arg name and \@tempc is the current arg value.
- % First place the new argument macro definition into \@tempd
- \expandafter\macname\expandafter{\@tempc}%
- \expandafter\let\csname macarg.\@tempb\endcsname\relax
- \expandafter\def\expandafter\@tempe\expandafter{%
- \csname macarg.\@tempb\endcsname}%
- \edef\@tempd{\long\def\@tempe{\the\macname}}%
- \push@\@tempd\macargdeflist@
- \let\next\getargvals@@
- \fi
- \fi
- \next
-}
-
-\def\push@#1#2{%
- \expandafter\expandafter\expandafter\def
- \expandafter\expandafter\expandafter#2%
- \expandafter\expandafter\expandafter{%
- \expandafter#1#2}%
-}
-
-% Replace arguments by their values in the macro body, and place the result
-% in macro \@tempa
-\def\macvalstoargs@{%
- % To do this we use the property that token registers that are \the'ed
- % within an \edef expand only once. So we are going to place all argument
- % values into respective token registers.
- %
- % First we save the token context, and initialize argument numbering.
- \begingroup
- \paramno0\relax
- % Then, for each argument number #N, we place the corresponding argument
- % value into a new token list register \toks#N
- \expandafter\putargsintokens@\saveparamlist@,;,%
- % Then, we expand the body so that argument are replaced by their
- % values. The trick for values not to be expanded themselves is that they
- % are within tokens and that tokens expand only once in an \edef .
- \edef\@tempc{\csname mac.\macroname .body\endcsname}%
- % Now we restore the token stack pointer to free the token list registers
- % which we have used, but we make sure that expanded body is saved after
- % group.
- \expandafter
- \endgroup
- \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
- }
-
-\def\macargexpandinbody@{%
- %% Define the named-macro outside of this group and then close this group.
- \expandafter
- \endgroup
- \macargdeflist@
- % First the replace in body the macro arguments by their values, the result
- % is in \@tempa .
- \macvalstoargs@
- % Then we point at the \norecurse or \gobble (for recursive) macro value
- % with \@tempb .
- \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
- % Depending on whether it is recursive or not, we need some tailing
- % \egroup .
- \ifx\@tempb\gobble
- \let\@tempc\relax
- \else
- \let\@tempc\egroup
- \fi
- % And now we do the real job:
- \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
- \@tempd
-}
-
-\def\putargsintokens@#1,{%
- \if#1;\let\next\relax
- \else
- \let\next\putargsintokens@
- % First we allocate the new token list register, and give it a temporary
- % alias \@tempb .
- \toksdef\@tempb\the\paramno
- % Then we place the argument value into that token list register.
- \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
- \expandafter\@tempb\expandafter{\@tempa}%
- \advance\paramno by 1\relax
- \fi
- \next
-}
-
-% Save the token stack pointer into macro #1
-\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}}
-% Restore the token stack pointer from number in macro #1
-\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax}
-% newtoks that can be used non \outer .
-\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi}
-
-% Tailing missing arguments are set to empty
-\def\setemptyargvalues@{%
- \ifx\paramlist\nilm@
- \let\next\macargexpandinbody@
- \else
- \expandafter\setemptyargvaluesparser@\paramlist\endargs@
- \let\next\setemptyargvalues@
- \fi
- \next
-}
-
-\def\setemptyargvaluesparser@#1,#2\endargs@{%
- \expandafter\def\expandafter\@tempa\expandafter{%
- \expandafter\def\csname macarg.#1\endcsname{}}%
- \push@\@tempa\macargdeflist@
- \def\paramlist{#2}%
-}
-
-% #1 is the element target macro
-% #2 is the list macro
-% #3,#4\endargs@ is the list value
-\def\pop@#1#2#3,#4\endargs@{%
- \def#1{#3}%
- \def#2{#4}%
-}
-\long\def\longpop@#1#2#3,#4\endargs@{%
- \long\def#1{#3}%
- \long\def#2{#4}%
-}
-
-% This defines a Texinfo @macro. There are eight cases: recursive and
-% nonrecursive macros of zero, one, up to nine, and many arguments.
-% Much magic with \expandafter here.
-% \xdef is used so that macro definitions will survive the file
-% they're defined in; @include reads the file inside a group.
-%
-\def\defmacro{%
- \let\hash=##% convert placeholders to macro parameter chars
- \ifrecursive
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\scanmacro{\temp}}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup\noexpand\scanmacro{\temp}}%
- \else
- \ifnum\paramno<10\relax % at most 9
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{\egroup\noexpand\scanmacro{\temp}}%
- \else % 10 or more
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\getargvals@{\the\macname}{\argl}%
- }%
- \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
- \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
- \fi
- \fi
- \else
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \else % at most 9
- \ifnum\paramno<10\relax
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \expandafter\noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \else % 10 or more:
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\getargvals@{\the\macname}{\argl}%
- }%
- \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
- \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse
- \fi
- \fi
- \fi}
-
-\catcode `\@\texiatcatcode\relax
-
-\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
-
-% \braceorline decides whether the next nonwhitespace character is a
-% {. If so it reads up to the closing }, if not, it reads the whole
-% line. Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg).
-%
-\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
-\def\braceorlinexxx{%
- \ifx\nchar\bgroup\else
- \expandafter\parsearg
- \fi \macnamexxx}
-
-
-% @alias.
-% We need some trickery to remove the optional spaces around the equal
-% sign. Make them active and then expand them all to nothing.
-%
-\def\alias{\parseargusing\obeyspaces\aliasxxx}
-\def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{%
- {%
- \expandafter\let\obeyedspace=\empty
- \addtomacrolist{#1}%
- \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
- }%
- \next
-}
-
-
-\message{cross references,}
-
-\newwrite\auxfile
-\newif\ifhavexrefs % True if xref values are known.
-\newif\ifwarnedxrefs % True if we warned once that they aren't known.
-
-% @inforef is relatively simple.
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{%
- \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
- node \samp{\ignorespaces#1{}}}
-
-% @node's only job in TeX is to define \lastnode, which is used in
-% cross-references. The @node line might or might not have commas, and
-% might or might not have spaces before the first comma, like:
-% @node foo , bar , ...
-% We don't want such trailing spaces in the node name.
-%
-\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
-%
-% also remove a trailing comma, in case of something like this:
-% @node Help-Cross, , , Cross-refs
-\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
-\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
-
-\let\nwnode=\node
-\let\lastnode=\empty
-
-% Write a cross-reference definition for the current node. #1 is the
-% type (Ynumbered, Yappendix, Ynothing).
-%
-\def\donoderef#1{%
- \ifx\lastnode\empty\else
- \setref{\lastnode}{#1}%
- \global\let\lastnode=\empty
- \fi
-}
-
-% @anchor{NAME} -- define xref target at arbitrary point.
-%
-\newcount\savesfregister
-%
-\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
-
-% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
-% anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \lastsection,
-% or the anchor name.
-% 2) NAME-snt - section number and type, passed as the SNT arg, or
-% empty for anchors.
-% 3) NAME-pg - the page number.
-%
-% This is called from \donoderef, \anchor, and \dofloat. In the case of
-% floats, there is an additional part, which is not written here:
-% 4) NAME-lof - the text as it should appear in a @listoffloats.
-%
-\def\setref#1#2{%
- \pdfmkdest{#1}%
- \iflinks
- {%
- \atdummies % preserve commands, but don't expand them
- \edef\writexrdef##1##2{%
- \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
- ##1}{##2}}% these are parameters of \writexrdef
- }%
- \toks0 = \expandafter{\lastsection}%
- \immediate \writexrdef{title}{\the\toks0 }%
- \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
- \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
- }%
- \fi
-}
-
-% @xrefautosectiontitle on|off says whether @section(ing) names are used
-% automatically in xrefs, if the third arg is not explicitly specified.
-% This was provided as a "secret" @set xref-automatic-section-title
-% variable, now it's official.
-%
-\parseargdef\xrefautomaticsectiontitle{%
- \def\temp{#1}%
- \ifx\temp\onword
- \expandafter\let\csname SETxref-automatic-section-title\endcsname
- = \empty
- \else\ifx\temp\offword
- \expandafter\let\csname SETxref-automatic-section-title\endcsname
- = \relax
- \else
- \errhelp = \EMsimple
- \errmessage{Unknown @xrefautomaticsectiontitle value `\temp',
- must be on|off}%
- \fi\fi
-}
-
-% \f
-% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
-% the node name, #2 the name of the Info cross-reference, #3 the printed
-% node name, #4 the name of the Info file, #5 the name of the printed
-% manual. All but the node name can be omitted.
-%
-\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
-\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
-\def\ref#1{\xrefX[#1,,,,,,,]}
-%
-\newbox\toprefbox
-\newbox\printedrefnamebox
-\newbox\infofilenamebox
-\newbox\printedmanualbox
-%
-\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
- \unsepspaces
- %
- % Get args without leading/trailing spaces.
- \def\printedrefname{\ignorespaces #3}%
- \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
- %
- \def\infofilename{\ignorespaces #4}%
- \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
- %
- \def\printedmanual{\ignorespaces #5}%
- \setbox\printedmanualbox = \hbox{\printedmanual\unskip}%
- %
- % If the printed reference name (arg #3) was not explicitly given in
- % the @xref, figure out what we want to use.
- \ifdim \wd\printedrefnamebox = 0pt
- % No printed node name was explicitly given.
- \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
- % Not auto section-title: use node name inside the square brackets.
- \def\printedrefname{\ignorespaces #1}%
- \else
- % Auto section-title: use chapter/section title inside
- % the square brackets if we have it.
- \ifdim \wd\printedmanualbox > 0pt
- % It is in another manual, so we don't have it; use node name.
- \def\printedrefname{\ignorespaces #1}%
- \else
- \ifhavexrefs
- % We (should) know the real title if we have the xref values.
- \def\printedrefname{\refx{#1-title}{}}%
- \else
- % Otherwise just copy the Info node name.
- \def\printedrefname{\ignorespaces #1}%
- \fi%
- \fi
- \fi
- \fi
- %
- % Make link in pdf output.
- \ifpdf
- {\indexnofonts
- \turnoffactive
- \makevalueexpandable
- % This expands tokens, so do it after making catcode changes, so _
- % etc. don't get their TeX definitions. This ignores all spaces in
- % #4, including (wrongly) those in the middle of the filename.
- \getfilename{#4}%
- %
- % This (wrongly) does not take account of leading or trailing
- % spaces in #1, which should be ignored.
- \edef\pdfxrefdest{#1}%
- \ifx\pdfxrefdest\empty
- \def\pdfxrefdest{Top}% no empty targets
- \else
- \txiescapepdf\pdfxrefdest % escape PDF special chars
- \fi
- %
- \leavevmode
- \startlink attr{/Border [0 0 0]}%
- \ifnum\filenamelength>0
- goto file{\the\filename.pdf} name{\pdfxrefdest}%
- \else
- goto name{\pdfmkpgn{\pdfxrefdest}}%
- \fi
- }%
- \setcolor{\linkcolor}%
- \fi
- %
- % Float references are printed completely differently: "Figure 1.2"
- % instead of "[somenode], p.3". We distinguish them by the
- % LABEL-title being set to a magic string.
- {%
- % Have to otherify everything special to allow the \csname to
- % include an _ in the xref name, etc.
- \indexnofonts
- \turnoffactive
- \expandafter\global\expandafter\let\expandafter\Xthisreftitle
- \csname XR#1-title\endcsname
- }%
- \iffloat\Xthisreftitle
- % If the user specified the print name (third arg) to the ref,
- % print it instead of our usual "Figure 1.2".
- \ifdim\wd\printedrefnamebox = 0pt
- \refx{#1-snt}{}%
- \else
- \printedrefname
- \fi
- %
- % If the user also gave the printed manual name (fifth arg), append
- % "in MANUALNAME".
- \ifdim \wd\printedmanualbox > 0pt
- \space \putwordin{} \cite{\printedmanual}%
- \fi
- \else
- % node/anchor (non-float) references.
- %
- % If we use \unhbox to print the node names, TeX does not insert
- % empty discretionaries after hyphens, which means that it will not
- % find a line break at a hyphen in a node names. Since some manuals
- % are best written with fairly long node names, containing hyphens,
- % this is a loss. Therefore, we give the text of the node name
- % again, so it is as if TeX is seeing it for the first time.
- %
- \ifdim \wd\printedmanualbox > 0pt
- % Cross-manual reference with a printed manual name.
- %
- \crossmanualxref{\cite{\printedmanual\unskip}}%
- %
- \else\ifdim \wd\infofilenamebox > 0pt
- % Cross-manual reference with only an info filename (arg 4), no
- % printed manual name (arg 5). This is essentially the same as
- % the case above; we output the filename, since we have nothing else.
- %
- \crossmanualxref{\code{\infofilename\unskip}}%
- %
- \else
- % Reference within this manual.
- %
- % _ (for example) has to be the character _ for the purposes of the
- % control sequence corresponding to the node, but it has to expand
- % into the usual \leavevmode...\vrule stuff for purposes of
- % printing. So we \turnoffactive for the \refx-snt, back on for the
- % printing, back off for the \refx-pg.
- {\turnoffactive
- % Only output a following space if the -snt ref is nonempty; for
- % @unnumbered and @anchor, it won't be.
- \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
- \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
- }%
- % output the `[mynode]' via the macro below so it can be overridden.
- \xrefprintnodename\printedrefname
- %
- % But we always want a comma and a space:
- ,\space
- %
- % output the `page 3'.
- \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
- \fi\fi
- \fi
- \endlink
-\endgroup}
-
-% Output a cross-manual xref to #1. Used just above (twice).
-%
-% Only include the text "Section ``foo'' in" if the foo is neither
-% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply
-% "see The Foo Manual", the idea being to refer to the whole manual.
-%
-% But, this being TeX, we can't easily compare our node name against the
-% string "Top" while ignoring the possible spaces before and after in
-% the input. By adding the arbitrary 7sp below, we make it much less
-% likely that a real node name would have the same width as "Top" (e.g.,
-% in a monospaced font). Hopefully it will never happen in practice.
-%
-% For the same basic reason, we retypeset the "Top" at every
-% reference, since the current font is indeterminate.
-%
-\def\crossmanualxref#1{%
- \setbox\toprefbox = \hbox{Top\kern7sp}%
- \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
- \ifdim \wd2 > 7sp % nonempty?
- \ifdim \wd2 = \wd\toprefbox \else % same as Top?
- \putwordSection{} ``\printedrefname'' \putwordin{}\space
- \fi
- \fi
- #1%
-}
-
-% This macro is called from \xrefX for the `[nodename]' part of xref
-% output. It's a separate macro only so it can be changed more easily,
-% since square brackets don't work well in some documents. Particularly
-% one that Bob is working on :).
-%
-\def\xrefprintnodename#1{[#1]}
-
-% Things referred to by \setref.
-%
-\def\Ynothing{}
-\def\Yomitfromtoc{}
-\def\Ynumbered{%
- \ifnum\secno=0
- \putwordChapter@tie \the\chapno
- \else \ifnum\subsecno=0
- \putwordSection@tie \the\chapno.\the\secno
- \else \ifnum\subsubsecno=0
- \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
- \else
- \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
- \fi\fi\fi
-}
-\def\Yappendix{%
- \ifnum\secno=0
- \putwordAppendix@tie @char\the\appendixno{}%
- \else \ifnum\subsecno=0
- \putwordSection@tie @char\the\appendixno.\the\secno
- \else \ifnum\subsubsecno=0
- \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
- \else
- \putwordSection@tie
- @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
- \fi\fi\fi
-}
-
-% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
-% If its value is nonempty, SUFFIX is output afterward.
-%
-\def\refx#1#2{%
- {%
- \indexnofonts
- \otherbackslash
- \expandafter\global\expandafter\let\expandafter\thisrefX
- \csname XR#1\endcsname
- }%
- \ifx\thisrefX\relax
- % If not defined, say something at least.
- \angleleft un\-de\-fined\angleright
- \iflinks
- \ifhavexrefs
- {\toks0 = {#1}% avoid expansion of possibly-complex value
- \message{\linenumber Undefined cross reference `\the\toks0'.}}%
- \else
- \ifwarnedxrefs\else
- \global\warnedxrefstrue
- \message{Cross reference values unknown; you must run TeX again.}%
- \fi
- \fi
- \fi
- \else
- % It's defined, so just use it.
- \thisrefX
- \fi
- #2% Output the suffix in any case.
-}
-
-% This is the macro invoked by entries in the aux file. Usually it's
-% just a \def (we prepend XR to the control sequence name to avoid
-% collisions). But if this is a float type, we have more work to do.
-%
-\def\xrdef#1#2{%
- {% The node name might contain 8-bit characters, which in our current
- % implementation are changed to commands like @'e. Don't let these
- % mess up the control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safexrefname{#1}%
- }%
- %
- \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
- %
- % Was that xref control sequence that we just defined for a float?
- \expandafter\iffloat\csname XR\safexrefname\endcsname
- % it was a float, and we have the (safe) float type in \iffloattype.
- \expandafter\let\expandafter\floatlist
- \csname floatlist\iffloattype\endcsname
- %
- % Is this the first time we've seen this float type?
- \expandafter\ifx\floatlist\relax
- \toks0 = {\do}% yes, so just \do
- \else
- % had it before, so preserve previous elements in list.
- \toks0 = \expandafter{\floatlist\do}%
- \fi
- %
- % Remember this xref in the control sequence \floatlistFLOATTYPE,
- % for later use in \listoffloats.
- \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
- {\safexrefname}}%
- \fi
-}
-
-% Read the last existing aux file, if any. No error if none exists.
-%
-\def\tryauxfile{%
- \openin 1 \jobname.aux
- \ifeof 1 \else
- \readdatafile{aux}%
- \global\havexrefstrue
- \fi
- \closein 1
-}
-
-\def\setupdatafile{%
- \catcode`\^^@=\other
- \catcode`\^^A=\other
- \catcode`\^^B=\other
- \catcode`\^^C=\other
- \catcode`\^^D=\other
- \catcode`\^^E=\other
- \catcode`\^^F=\other
- \catcode`\^^G=\other
- \catcode`\^^H=\other
- \catcode`\^^K=\other
- \catcode`\^^L=\other
- \catcode`\^^N=\other
- \catcode`\^^P=\other
- \catcode`\^^Q=\other
- \catcode`\^^R=\other
- \catcode`\^^S=\other
- \catcode`\^^T=\other
- \catcode`\^^U=\other
- \catcode`\^^V=\other
- \catcode`\^^W=\other
- \catcode`\^^X=\other
- \catcode`\^^Z=\other
- \catcode`\^^[=\other
- \catcode`\^^\=\other
- \catcode`\^^]=\other
- \catcode`\^^^=\other
- \catcode`\^^_=\other
- % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
- % in xref tags, i.e., node names. But since ^^e4 notation isn't
- % supported in the main text, it doesn't seem desirable. Furthermore,
- % that is not enough: for node names that actually contain a ^
- % character, we would end up writing a line like this: 'xrdef {'hat
- % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
- % argument, and \hat is not an expandable control sequence. It could
- % all be worked out, but why? Either we support ^^ or we don't.
- %
- % The other change necessary for this was to define \auxhat:
- % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
- % and then to call \auxhat in \setq.
- %
- \catcode`\^=\other
- %
- % Special characters. Should be turned off anyway, but...
- \catcode`\~=\other
- \catcode`\[=\other
- \catcode`\]=\other
- \catcode`\"=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\$=\other
- \catcode`\#=\other
- \catcode`\&=\other
- \catcode`\%=\other
- \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
- %
- % This is to support \ in node names and titles, since the \
- % characters end up in a \csname. It's easier than
- % leaving it active and making its active definition an actual \
- % character. What I don't understand is why it works in the *value*
- % of the xrdef. Seems like it should be a catcode12 \, and that
- % should not typeset properly. But it works, so I'm moving on for
- % now. --karl, 15jan04.
- \catcode`\\=\other
- %
- % Make the characters 128-255 be printing characters.
- {%
- \count1=128
- \def\loop{%
- \catcode\count1=\other
- \advance\count1 by 1
- \ifnum \count1<256 \loop \fi
- }%
- }%
- %
- % @ is our escape character in .aux files, and we need braces.
- \catcode`\{=1
- \catcode`\}=2
- \catcode`\@=0
-}
-
-\def\readdatafile#1{%
-\begingroup
- \setupdatafile
- \input\jobname.#1
-\endgroup}
-
-
-\message{insertions,}
-% including footnotes.
-
-\newcount \footnoteno
-
-% The trailing space in the following definition for supereject is
-% vital for proper filling; pages come out unaligned when you do a
-% pagealignmacro call if that space before the closing brace is
-% removed. (Generally, numeric constants should always be followed by a
-% space to prevent strange expansion errors.)
-\def\supereject{\par\penalty -20000\footnoteno =0 }
-
-% @footnotestyle is meaningful for Info output only.
-\let\footnotestyle=\comment
-
-{\catcode `\@=11
-%
-% Auto-number footnotes. Otherwise like plain.
-\gdef\footnote{%
- \let\indent=\ptexindent
- \let\noindent=\ptexnoindent
- \global\advance\footnoteno by \@ne
- \edef\thisfootno{$^{\the\footnoteno}$}%
- %
- % In case the footnote comes at the end of a sentence, preserve the
- % extra spacing after we do the footnote number.
- \let\@sf\empty
- \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
- %
- % Remove inadvertent blank space before typesetting the footnote number.
- \unskip
- \thisfootno\@sf
- \dofootnote
-}%
-
-% Don't bother with the trickery in plain.tex to not require the
-% footnote text as a parameter. Our footnotes don't need to be so general.
-%
-% Oh yes, they do; otherwise, @ifset (and anything else that uses
-% \parseargline) fails inside footnotes because the tokens are fixed when
-% the footnote is read. --karl, 16nov96.
-%
-\gdef\dofootnote{%
- \insert\footins\bgroup
- % We want to typeset this text as a normal paragraph, even if the
- % footnote reference occurs in (for example) a display environment.
- % So reset some parameters.
- \hsize=\pagewidth
- \interlinepenalty\interfootnotelinepenalty
- \splittopskip\ht\strutbox % top baseline for broken footnotes
- \splitmaxdepth\dp\strutbox
- \floatingpenalty\@MM
- \leftskip\z@skip
- \rightskip\z@skip
- \spaceskip\z@skip
- \xspaceskip\z@skip
- \parindent\defaultparindent
- %
- \smallfonts \rm
- %
- % Because we use hanging indentation in footnotes, a @noindent appears
- % to exdent this text, so make it be a no-op. makeinfo does not use
- % hanging indentation so @noindent can still be needed within footnote
- % text after an @example or the like (not that this is good style).
- \let\noindent = \relax
- %
- % Hang the footnote text off the number. Use \everypar in case the
- % footnote extends for more than one paragraph.
- \everypar = {\hang}%
- \textindent{\thisfootno}%
- %
- % Don't crash into the line above the footnote text. Since this
- % expands into a box, it must come within the paragraph, lest it
- % provide a place where TeX can split the footnote.
- \footstrut
- %
- % Invoke rest of plain TeX footnote routine.
- \futurelet\next\fo@t
-}
-}%end \catcode `\@=11
-
-% In case a @footnote appears in a vbox, save the footnote text and create
-% the real \insert just after the vbox finished. Otherwise, the insertion
-% would be lost.
-% Similarly, if a @footnote appears inside an alignment, save the footnote
-% text to a box and make the \insert when a row of the table is finished.
-% And the same can be done for other insert classes. --kasal, 16nov03.
-
-% Replace the \insert primitive by a cheating macro.
-% Deeper inside, just make sure that the saved insertions are not spilled
-% out prematurely.
-%
-\def\startsavinginserts{%
- \ifx \insert\ptexinsert
- \let\insert\saveinsert
- \else
- \let\checkinserts\relax
- \fi
-}
-
-% This \insert replacement works for both \insert\footins{foo} and
-% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
-%
-\def\saveinsert#1{%
- \edef\next{\noexpand\savetobox \makeSAVEname#1}%
- \afterassignment\next
- % swallow the left brace
- \let\temp =
-}
-\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
-\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
-
-\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
-
-\def\placesaveins#1{%
- \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
- {\box#1}%
-}
-
-% eat @SAVE -- beware, all of them have catcode \other:
-{
- \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-)
- \gdef\gobblesave @SAVE{}
-}
-
-% initialization:
-\def\newsaveins #1{%
- \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
- \next
-}
-\def\newsaveinsX #1{%
- \csname newbox\endcsname #1%
- \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
- \checksaveins #1}%
-}
-
-% initialize:
-\let\checkinserts\empty
-\newsaveins\footins
-\newsaveins\margin
-
-
-% @image. We use the macros from epsf.tex to support this.
-% If epsf.tex is not installed and @image is used, we complain.
-%
-% Check for and read epsf.tex up front. If we read it only at @image
-% time, we might be inside a group, and then its definitions would get
-% undone and the next image would fail.
-\openin 1 = epsf.tex
-\ifeof 1 \else
- % Do not bother showing banner with epsf.tex v2.7k (available in
- % doc/epsf.tex and on ctan).
- \def\epsfannounce{\toks0 = }%
- \input epsf.tex
-\fi
-\closein 1
-%
-% We will only complain once about lack of epsf.tex.
-\newif\ifwarnednoepsf
-\newhelp\noepsfhelp{epsf.tex must be installed for images to
- work. It is also included in the Texinfo distribution, or you can get
- it from ftp://tug.org/tex/epsf.tex.}
-%
-\def\image#1{%
- \ifx\epsfbox\thisisundefined
- \ifwarnednoepsf \else
- \errhelp = \noepsfhelp
- \errmessage{epsf.tex not found, images will be ignored}%
- \global\warnednoepsftrue
- \fi
- \else
- \imagexxx #1,,,,,\finish
- \fi
-}
-%
-% Arguments to @image:
-% #1 is (mandatory) image filename; we tack on .eps extension.
-% #2 is (optional) width, #3 is (optional) height.
-% #4 is (ignored optional) html alt text.
-% #5 is (ignored optional) extension.
-% #6 is just the usual extra ignored arg for parsing stuff.
-\newif\ifimagevmode
-\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
- \catcode`\^^M = 5 % in case we're inside an example
- \normalturnoffactive % allow _ et al. in names
- % If the image is by itself, center it.
- \ifvmode
- \imagevmodetrue
- \else \ifx\centersub\centerV
- % for @center @image, we need a vbox so we can have our vertical space
- \imagevmodetrue
- \vbox\bgroup % vbox has better behavior than vtop herev
- \fi\fi
- %
- \ifimagevmode
- \nobreak\medskip
- % Usually we'll have text after the image which will insert
- % \parskip glue, so insert it here too to equalize the space
- % above and below.
- \nobreak\vskip\parskip
- \nobreak
- \fi
- %
- % Leave vertical mode so that indentation from an enclosing
- % environment such as @quotation is respected.
- % However, if we're at the top level, we don't want the
- % normal paragraph indentation.
- % On the other hand, if we are in the case of @center @image, we don't
- % want to start a paragraph, which will create a hsize-width box and
- % eradicate the centering.
- \ifx\centersub\centerV\else \noindent \fi
- %
- % Output the image.
- \ifpdf
- \dopdfimage{#1}{#2}{#3}%
- \else
- % \epsfbox itself resets \epsf?size at each figure.
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
- \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
- \epsfbox{#1.eps}%
- \fi
- %
- \ifimagevmode
- \medskip % space after a standalone image
- \fi
- \ifx\centersub\centerV \egroup \fi
-\endgroup}
-
-
-% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
-% etc. We don't actually implement floating yet, we always include the
-% float "here". But it seemed the best name for the future.
-%
-\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
-
-% There may be a space before second and/or third parameter; delete it.
-\def\eatcommaspace#1, {#1,}
-
-% #1 is the optional FLOATTYPE, the text label for this float, typically
-% "Figure", "Table", "Example", etc. Can't contain commas. If omitted,
-% this float will not be numbered and cannot be referred to.
-%
-% #2 is the optional xref label. Also must be present for the float to
-% be referable.
-%
-% #3 is the optional positioning argument; for now, it is ignored. It
-% will somehow specify the positions allowed to float to (here, top, bottom).
-%
-% We keep a separate counter for each FLOATTYPE, which we reset at each
-% chapter-level command.
-\let\resetallfloatnos=\empty
-%
-\def\dofloat#1,#2,#3,#4\finish{%
- \let\thiscaption=\empty
- \let\thisshortcaption=\empty
- %
- % don't lose footnotes inside @float.
- %
- % BEWARE: when the floats start float, we have to issue warning whenever an
- % insert appears inside a float which could possibly float. --kasal, 26may04
- %
- \startsavinginserts
- %
- % We can't be used inside a paragraph.
- \par
- %
- \vtop\bgroup
- \def\floattype{#1}%
- \def\floatlabel{#2}%
- \def\floatloc{#3}% we do nothing with this yet.
- %
- \ifx\floattype\empty
- \let\safefloattype=\empty
- \else
- {%
- % the floattype might have accents or other special characters,
- % but we need to use it in a control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safefloattype{\floattype}%
- }%
- \fi
- %
- % If label is given but no type, we handle that as the empty type.
- \ifx\floatlabel\empty \else
- % We want each FLOATTYPE to be numbered separately (Figure 1,
- % Table 1, Figure 2, ...). (And if no label, no number.)
- %
- \expandafter\getfloatno\csname\safefloattype floatno\endcsname
- \global\advance\floatno by 1
- %
- {%
- % This magic value for \lastsection is output by \setref as the
- % XREFLABEL-title value. \xrefX uses it to distinguish float
- % labels (which have a completely different output format) from
- % node and anchor labels. And \xrdef uses it to construct the
- % lists of floats.
- %
- \edef\lastsection{\floatmagic=\safefloattype}%
- \setref{\floatlabel}{Yfloat}%
- }%
- \fi
- %
- % start with \parskip glue, I guess.
- \vskip\parskip
- %
- % Don't suppress indentation if a float happens to start a section.
- \restorefirstparagraphindent
-}
-
-% we have these possibilities:
-% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
-% @float Foo,lbl & no caption: Foo 1.1
-% @float Foo & @caption{Cap}: Foo: Cap
-% @float Foo & no caption: Foo
-% @float ,lbl & Caption{Cap}: 1.1: Cap
-% @float ,lbl & no caption: 1.1
-% @float & @caption{Cap}: Cap
-% @float & no caption:
-%
-\def\Efloat{%
- \let\floatident = \empty
- %
- % In all cases, if we have a float type, it comes first.
- \ifx\floattype\empty \else \def\floatident{\floattype}\fi
- %
- % If we have an xref label, the number comes next.
- \ifx\floatlabel\empty \else
- \ifx\floattype\empty \else % if also had float type, need tie first.
- \appendtomacro\floatident{\tie}%
- \fi
- % the number.
- \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
- \fi
- %
- % Start the printed caption with what we've constructed in
- % \floatident, but keep it separate; we need \floatident again.
- \let\captionline = \floatident
- %
- \ifx\thiscaption\empty \else
- \ifx\floatident\empty \else
- \appendtomacro\captionline{: }% had ident, so need a colon between
- \fi
- %
- % caption text.
- \appendtomacro\captionline{\scanexp\thiscaption}%
- \fi
- %
- % If we have anything to print, print it, with space before.
- % Eventually this needs to become an \insert.
- \ifx\captionline\empty \else
- \vskip.5\parskip
- \captionline
- %
- % Space below caption.
- \vskip\parskip
- \fi
- %
- % If have an xref label, write the list of floats info. Do this
- % after the caption, to avoid chance of it being a breakpoint.
- \ifx\floatlabel\empty \else
- % Write the text that goes in the lof to the aux file as
- % \floatlabel-lof. Besides \floatident, we include the short
- % caption if specified, else the full caption if specified, else nothing.
- {%
- \atdummies
- %
- % since we read the caption text in the macro world, where ^^M
- % is turned into a normal character, we have to scan it back, so
- % we don't write the literal three characters "^^M" into the aux file.
- \scanexp{%
- \xdef\noexpand\gtemp{%
- \ifx\thisshortcaption\empty
- \thiscaption
- \else
- \thisshortcaption
- \fi
- }%
- }%
- \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
- \ifx\gtemp\empty \else : \gtemp \fi}}%
- }%
- \fi
- \egroup % end of \vtop
- %
- % place the captured inserts
- %
- % BEWARE: when the floats start floating, we have to issue warning
- % whenever an insert appears inside a float which could possibly
- % float. --kasal, 26may04
- %
- \checkinserts
-}
-
-% Append the tokens #2 to the definition of macro #1, not expanding either.
-%
-\def\appendtomacro#1#2{%
- \expandafter\def\expandafter#1\expandafter{#1#2}%
-}
-
-% @caption, @shortcaption
-%
-\def\caption{\docaption\thiscaption}
-\def\shortcaption{\docaption\thisshortcaption}
-\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
-\def\defcaption#1#2{\egroup \def#1{#2}}
-
-% The parameter is the control sequence identifying the counter we are
-% going to use. Create it if it doesn't exist and assign it to \floatno.
-\def\getfloatno#1{%
- \ifx#1\relax
- % Haven't seen this figure type before.
- \csname newcount\endcsname #1%
- %
- % Remember to reset this floatno at the next chap.
- \expandafter\gdef\expandafter\resetallfloatnos
- \expandafter{\resetallfloatnos #1=0 }%
- \fi
- \let\floatno#1%
-}
-
-% \setref calls this to get the XREFLABEL-snt value. We want an @xref
-% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
-% first read the @float command.
-%
-\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
-
-% Magic string used for the XREFLABEL-title value, so \xrefX can
-% distinguish floats from other xref types.
-\def\floatmagic{!!float!!}
-
-% #1 is the control sequence we are passed; we expand into a conditional
-% which is true if #1 represents a float ref. That is, the magic
-% \lastsection value which we \setref above.
-%
-\def\iffloat#1{\expandafter\doiffloat#1==\finish}
-%
-% #1 is (maybe) the \floatmagic string. If so, #2 will be the
-% (safe) float type for this float. We set \iffloattype to #2.
-%
-\def\doiffloat#1=#2=#3\finish{%
- \def\temp{#1}%
- \def\iffloattype{#2}%
- \ifx\temp\floatmagic
-}
-
-% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
-%
-\parseargdef\listoffloats{%
- \def\floattype{#1}% floattype
- {%
- % the floattype might have accents or other special characters,
- % but we need to use it in a control sequence name.
- \indexnofonts
- \turnoffactive
- \xdef\safefloattype{\floattype}%
- }%
- %
- % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
- \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
- \ifhavexrefs
- % if the user said @listoffloats foo but never @float foo.
- \message{\linenumber No `\safefloattype' floats to list.}%
- \fi
- \else
- \begingroup
- \leftskip=\tocindent % indent these entries like a toc
- \let\do=\listoffloatsdo
- \csname floatlist\safefloattype\endcsname
- \endgroup
- \fi
-}
-
-% This is called on each entry in a list of floats. We're passed the
-% xref label, in the form LABEL-title, which is how we save it in the
-% aux file. We strip off the -title and look up \XRLABEL-lof, which
-% has the text we're supposed to typeset here.
-%
-% Figures without xref labels will not be included in the list (since
-% they won't appear in the aux file).
-%
-\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
-\def\listoffloatsdoentry#1-title\finish{{%
- % Can't fully expand XR#1-lof because it can contain anything. Just
- % pass the control sequence. On the other hand, XR#1-pg is just the
- % page number, and we want to fully expand that so we can get a link
- % in pdf output.
- \toksA = \expandafter{\csname XR#1-lof\endcsname}%
- %
- % use the same \entry macro we use to generate the TOC and index.
- \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
- \writeentry
-}}
-
-
-\message{localization,}
-
-% For single-language documents, @documentlanguage is usually given very
-% early, just after @documentencoding. Single argument is the language
-% (de) or locale (de_DE) abbreviation.
-%
-{
- \catcode`\_ = \active
- \globaldefs=1
-\parseargdef\documentlanguage{\begingroup
- \let_=\normalunderscore % normal _ character for filenames
- \tex % read txi-??.tex file in plain TeX.
- % Read the file by the name they passed if it exists.
- \openin 1 txi-#1.tex
- \ifeof 1
- \documentlanguagetrywithoutunderscore{#1_\finish}%
- \else
- \globaldefs = 1 % everything in the txi-LL files needs to persist
- \input txi-#1.tex
- \fi
- \closein 1
- \endgroup % end raw TeX
-\endgroup}
-%
-% If they passed de_DE, and txi-de_DE.tex doesn't exist,
-% try txi-de.tex.
-%
-\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
- \openin 1 txi-#1.tex
- \ifeof 1
- \errhelp = \nolanghelp
- \errmessage{Cannot read language file txi-#1.tex}%
- \else
- \globaldefs = 1 % everything in the txi-LL files needs to persist
- \input txi-#1.tex
- \fi
- \closein 1
-}
-}% end of special _ catcode
-%
-\newhelp\nolanghelp{The given language definition file cannot be found or
-is empty. Maybe you need to install it? Putting it in the current
-directory should work if nowhere else does.}
-
-% This macro is called from txi-??.tex files; the first argument is the
-% \language name to set (without the "\lang@" prefix), the second and
-% third args are \{left,right}hyphenmin.
-%
-% The language names to pass are determined when the format is built.
-% See the etex.log file created at that time, e.g.,
-% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
-%
-% With TeX Live 2008, etex now includes hyphenation patterns for all
-% available languages. This means we can support hyphenation in
-% Texinfo, at least to some extent. (This still doesn't solve the
-% accented characters problem.)
-%
-\catcode`@=11
-\def\txisetlanguage#1#2#3{%
- % do not set the language if the name is undefined in the current TeX.
- \expandafter\ifx\csname lang@#1\endcsname \relax
- \message{no patterns for #1}%
- \else
- \global\language = \csname lang@#1\endcsname
- \fi
- % but there is no harm in adjusting the hyphenmin values regardless.
- \global\lefthyphenmin = #2\relax
- \global\righthyphenmin = #3\relax
-}
-
-% Helpers for encodings.
-% Set the catcode of characters 128 through 255 to the specified number.
-%
-\def\setnonasciicharscatcode#1{%
- \count255=128
- \loop\ifnum\count255<256
- \global\catcode\count255=#1\relax
- \advance\count255 by 1
- \repeat
-}
-
-\def\setnonasciicharscatcodenonglobal#1{%
- \count255=128
- \loop\ifnum\count255<256
- \catcode\count255=#1\relax
- \advance\count255 by 1
- \repeat
-}
-
-% @documentencoding sets the definition of non-ASCII characters
-% according to the specified encoding.
-%
-\parseargdef\documentencoding{%
- % Encoding being declared for the document.
- \def\declaredencoding{\csname #1.enc\endcsname}%
- %
- % Supported encodings: names converted to tokens in order to be able
- % to compare them with \ifx.
- \def\ascii{\csname US-ASCII.enc\endcsname}%
- \def\latnine{\csname ISO-8859-15.enc\endcsname}%
- \def\latone{\csname ISO-8859-1.enc\endcsname}%
- \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
- \def\utfeight{\csname UTF-8.enc\endcsname}%
- %
- \ifx \declaredencoding \ascii
- \asciichardefs
- %
- \else \ifx \declaredencoding \lattwo
- \setnonasciicharscatcode\active
- \lattwochardefs
- %
- \else \ifx \declaredencoding \latone
- \setnonasciicharscatcode\active
- \latonechardefs
- %
- \else \ifx \declaredencoding \latnine
- \setnonasciicharscatcode\active
- \latninechardefs
- %
- \else \ifx \declaredencoding \utfeight
- \setnonasciicharscatcode\active
- \utfeightchardefs
- %
- \else
- \message{Unknown document encoding #1, ignoring.}%
- %
- \fi % utfeight
- \fi % latnine
- \fi % latone
- \fi % lattwo
- \fi % ascii
-}
-
-% A message to be logged when using a character that isn't available
-% the default font encoding (OT1).
-%
-\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
-
-% Take account of \c (plain) vs. \, (Texinfo) difference.
-\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
-
-% First, make active non-ASCII characters in order for them to be
-% correctly categorized when TeX reads the replacement text of
-% macros containing the character definitions.
-\setnonasciicharscatcode\active
-%
-% Latin1 (ISO-8859-1) character definitions.
-\def\latonechardefs{%
- \gdef^^a0{\tie}
- \gdef^^a1{\exclamdown}
- \gdef^^a2{\missingcharmsg{CENT SIGN}}
- \gdef^^a3{{\pounds}}
- \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
- \gdef^^a5{\missingcharmsg{YEN SIGN}}
- \gdef^^a6{\missingcharmsg{BROKEN BAR}}
- \gdef^^a7{\S}
- \gdef^^a8{\"{}}
- \gdef^^a9{\copyright}
- \gdef^^aa{\ordf}
- \gdef^^ab{\guillemetleft}
- \gdef^^ac{$\lnot$}
- \gdef^^ad{\-}
- \gdef^^ae{\registeredsymbol}
- \gdef^^af{\={}}
- %
- \gdef^^b0{\textdegree}
- \gdef^^b1{$\pm$}
- \gdef^^b2{$^2$}
- \gdef^^b3{$^3$}
- \gdef^^b4{\'{}}
- \gdef^^b5{$\mu$}
- \gdef^^b6{\P}
- %
- \gdef^^b7{$^.$}
- \gdef^^b8{\cedilla\ }
- \gdef^^b9{$^1$}
- \gdef^^ba{\ordm}
- %
- \gdef^^bb{\guillemetright}
- \gdef^^bc{$1\over4$}
- \gdef^^bd{$1\over2$}
- \gdef^^be{$3\over4$}
- \gdef^^bf{\questiondown}
- %
- \gdef^^c0{\`A}
- \gdef^^c1{\'A}
- \gdef^^c2{\^A}
- \gdef^^c3{\~A}
- \gdef^^c4{\"A}
- \gdef^^c5{\ringaccent A}
- \gdef^^c6{\AE}
- \gdef^^c7{\cedilla C}
- \gdef^^c8{\`E}
- \gdef^^c9{\'E}
- \gdef^^ca{\^E}
- \gdef^^cb{\"E}
- \gdef^^cc{\`I}
- \gdef^^cd{\'I}
- \gdef^^ce{\^I}
- \gdef^^cf{\"I}
- %
- \gdef^^d0{\DH}
- \gdef^^d1{\~N}
- \gdef^^d2{\`O}
- \gdef^^d3{\'O}
- \gdef^^d4{\^O}
- \gdef^^d5{\~O}
- \gdef^^d6{\"O}
- \gdef^^d7{$\times$}
- \gdef^^d8{\O}
- \gdef^^d9{\`U}
- \gdef^^da{\'U}
- \gdef^^db{\^U}
- \gdef^^dc{\"U}
- \gdef^^dd{\'Y}
- \gdef^^de{\TH}
- \gdef^^df{\ss}
- %
- \gdef^^e0{\`a}
- \gdef^^e1{\'a}
- \gdef^^e2{\^a}
- \gdef^^e3{\~a}
- \gdef^^e4{\"a}
- \gdef^^e5{\ringaccent a}
- \gdef^^e6{\ae}
- \gdef^^e7{\cedilla c}
- \gdef^^e8{\`e}
- \gdef^^e9{\'e}
- \gdef^^ea{\^e}
- \gdef^^eb{\"e}
- \gdef^^ec{\`{\dotless i}}
- \gdef^^ed{\'{\dotless i}}
- \gdef^^ee{\^{\dotless i}}
- \gdef^^ef{\"{\dotless i}}
- %
- \gdef^^f0{\dh}
- \gdef^^f1{\~n}
- \gdef^^f2{\`o}
- \gdef^^f3{\'o}
- \gdef^^f4{\^o}
- \gdef^^f5{\~o}
- \gdef^^f6{\"o}
- \gdef^^f7{$\div$}
- \gdef^^f8{\o}
- \gdef^^f9{\`u}
- \gdef^^fa{\'u}
- \gdef^^fb{\^u}
- \gdef^^fc{\"u}
- \gdef^^fd{\'y}
- \gdef^^fe{\th}
- \gdef^^ff{\"y}
-}
-
-% Latin9 (ISO-8859-15) encoding character definitions.
-\def\latninechardefs{%
- % Encoding is almost identical to Latin1.
- \latonechardefs
- %
- \gdef^^a4{\euro}
- \gdef^^a6{\v S}
- \gdef^^a8{\v s}
- \gdef^^b4{\v Z}
- \gdef^^b8{\v z}
- \gdef^^bc{\OE}
- \gdef^^bd{\oe}
- \gdef^^be{\"Y}
-}
-
-% Latin2 (ISO-8859-2) character definitions.
-\def\lattwochardefs{%
- \gdef^^a0{\tie}
- \gdef^^a1{\ogonek{A}}
- \gdef^^a2{\u{}}
- \gdef^^a3{\L}
- \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
- \gdef^^a5{\v L}
- \gdef^^a6{\'S}
- \gdef^^a7{\S}
- \gdef^^a8{\"{}}
- \gdef^^a9{\v S}
- \gdef^^aa{\cedilla S}
- \gdef^^ab{\v T}
- \gdef^^ac{\'Z}
- \gdef^^ad{\-}
- \gdef^^ae{\v Z}
- \gdef^^af{\dotaccent Z}
- %
- \gdef^^b0{\textdegree}
- \gdef^^b1{\ogonek{a}}
- \gdef^^b2{\ogonek{ }}
- \gdef^^b3{\l}
- \gdef^^b4{\'{}}
- \gdef^^b5{\v l}
- \gdef^^b6{\'s}
- \gdef^^b7{\v{}}
- \gdef^^b8{\cedilla\ }
- \gdef^^b9{\v s}
- \gdef^^ba{\cedilla s}
- \gdef^^bb{\v t}
- \gdef^^bc{\'z}
- \gdef^^bd{\H{}}
- \gdef^^be{\v z}
- \gdef^^bf{\dotaccent z}
- %
- \gdef^^c0{\'R}
- \gdef^^c1{\'A}
- \gdef^^c2{\^A}
- \gdef^^c3{\u A}
- \gdef^^c4{\"A}
- \gdef^^c5{\'L}
- \gdef^^c6{\'C}
- \gdef^^c7{\cedilla C}
- \gdef^^c8{\v C}
- \gdef^^c9{\'E}
- \gdef^^ca{\ogonek{E}}
- \gdef^^cb{\"E}
- \gdef^^cc{\v E}
- \gdef^^cd{\'I}
- \gdef^^ce{\^I}
- \gdef^^cf{\v D}
- %
- \gdef^^d0{\DH}
- \gdef^^d1{\'N}
- \gdef^^d2{\v N}
- \gdef^^d3{\'O}
- \gdef^^d4{\^O}
- \gdef^^d5{\H O}
- \gdef^^d6{\"O}
- \gdef^^d7{$\times$}
- \gdef^^d8{\v R}
- \gdef^^d9{\ringaccent U}
- \gdef^^da{\'U}
- \gdef^^db{\H U}
- \gdef^^dc{\"U}
- \gdef^^dd{\'Y}
- \gdef^^de{\cedilla T}
- \gdef^^df{\ss}
- %
- \gdef^^e0{\'r}
- \gdef^^e1{\'a}
- \gdef^^e2{\^a}
- \gdef^^e3{\u a}
- \gdef^^e4{\"a}
- \gdef^^e5{\'l}
- \gdef^^e6{\'c}
- \gdef^^e7{\cedilla c}
- \gdef^^e8{\v c}
- \gdef^^e9{\'e}
- \gdef^^ea{\ogonek{e}}
- \gdef^^eb{\"e}
- \gdef^^ec{\v e}
- \gdef^^ed{\'{\dotless{i}}}
- \gdef^^ee{\^{\dotless{i}}}
- \gdef^^ef{\v d}
- %
- \gdef^^f0{\dh}
- \gdef^^f1{\'n}
- \gdef^^f2{\v n}
- \gdef^^f3{\'o}
- \gdef^^f4{\^o}
- \gdef^^f5{\H o}
- \gdef^^f6{\"o}
- \gdef^^f7{$\div$}
- \gdef^^f8{\v r}
- \gdef^^f9{\ringaccent u}
- \gdef^^fa{\'u}
- \gdef^^fb{\H u}
- \gdef^^fc{\"u}
- \gdef^^fd{\'y}
- \gdef^^fe{\cedilla t}
- \gdef^^ff{\dotaccent{}}
-}
-
-% UTF-8 character definitions.
-%
-% This code to support UTF-8 is based on LaTeX's utf8.def, with some
-% changes for Texinfo conventions. It is included here under the GPL by
-% permission from Frank Mittelbach and the LaTeX team.
-%
-\newcount\countUTFx
-\newcount\countUTFy
-\newcount\countUTFz
-
-\gdef\UTFviiiTwoOctets#1#2{\expandafter
- \UTFviiiDefined\csname u8:#1\string #2\endcsname}
-%
-\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
- \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
-%
-\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
- \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
-
-\gdef\UTFviiiDefined#1{%
- \ifx #1\relax
- \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
- \else
- \expandafter #1%
- \fi
-}
-
-\begingroup
- \catcode`\~13
- \catcode`\"12
-
- \def\UTFviiiLoop{%
- \global\catcode\countUTFx\active
- \uccode`\~\countUTFx
- \uppercase\expandafter{\UTFviiiTmp}%
- \advance\countUTFx by 1
- \ifnum\countUTFx < \countUTFy
- \expandafter\UTFviiiLoop
- \fi}
-
- \countUTFx = "C2
- \countUTFy = "E0
- \def\UTFviiiTmp{%
- \xdef~{\noexpand\UTFviiiTwoOctets\string~}}
- \UTFviiiLoop
-
- \countUTFx = "E0
- \countUTFy = "F0
- \def\UTFviiiTmp{%
- \xdef~{\noexpand\UTFviiiThreeOctets\string~}}
- \UTFviiiLoop
-
- \countUTFx = "F0
- \countUTFy = "F4
- \def\UTFviiiTmp{%
- \xdef~{\noexpand\UTFviiiFourOctets\string~}}
- \UTFviiiLoop
-\endgroup
-
-\begingroup
- \catcode`\"=12
- \catcode`\<=12
- \catcode`\.=12
- \catcode`\,=12
- \catcode`\;=12
- \catcode`\!=12
- \catcode`\~=13
-
- \gdef\DeclareUnicodeCharacter#1#2{%
- \countUTFz = "#1\relax
- %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
- \begingroup
- \parseXMLCharref
- \def\UTFviiiTwoOctets##1##2{%
- \csname u8:##1\string ##2\endcsname}%
- \def\UTFviiiThreeOctets##1##2##3{%
- \csname u8:##1\string ##2\string ##3\endcsname}%
- \def\UTFviiiFourOctets##1##2##3##4{%
- \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
- \expandafter\expandafter\expandafter\expandafter
- \expandafter\expandafter\expandafter
- \gdef\UTFviiiTmp{#2}%
- \endgroup}
-
- \gdef\parseXMLCharref{%
- \ifnum\countUTFz < "A0\relax
- \errhelp = \EMsimple
- \errmessage{Cannot define Unicode char value < 00A0}%
- \else\ifnum\countUTFz < "800\relax
- \parseUTFviiiA,%
- \parseUTFviiiB C\UTFviiiTwoOctets.,%
- \else\ifnum\countUTFz < "10000\relax
- \parseUTFviiiA;%
- \parseUTFviiiA,%
- \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
- \else
- \parseUTFviiiA;%
- \parseUTFviiiA,%
- \parseUTFviiiA!%
- \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
- \fi\fi\fi
- }
-
- \gdef\parseUTFviiiA#1{%
- \countUTFx = \countUTFz
- \divide\countUTFz by 64
- \countUTFy = \countUTFz
- \multiply\countUTFz by 64
- \advance\countUTFx by -\countUTFz
- \advance\countUTFx by 128
- \uccode `#1\countUTFx
- \countUTFz = \countUTFy}
-
- \gdef\parseUTFviiiB#1#2#3#4{%
- \advance\countUTFz by "#10\relax
- \uccode `#3\countUTFz
- \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
-\endgroup
-
-\def\utfeightchardefs{%
- \DeclareUnicodeCharacter{00A0}{\tie}
- \DeclareUnicodeCharacter{00A1}{\exclamdown}
- \DeclareUnicodeCharacter{00A3}{\pounds}
- \DeclareUnicodeCharacter{00A8}{\"{ }}
- \DeclareUnicodeCharacter{00A9}{\copyright}
- \DeclareUnicodeCharacter{00AA}{\ordf}
- \DeclareUnicodeCharacter{00AB}{\guillemetleft}
- \DeclareUnicodeCharacter{00AD}{\-}
- \DeclareUnicodeCharacter{00AE}{\registeredsymbol}
- \DeclareUnicodeCharacter{00AF}{\={ }}
-
- \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}
- \DeclareUnicodeCharacter{00B4}{\'{ }}
- \DeclareUnicodeCharacter{00B8}{\cedilla{ }}
- \DeclareUnicodeCharacter{00BA}{\ordm}
- \DeclareUnicodeCharacter{00BB}{\guillemetright}
- \DeclareUnicodeCharacter{00BF}{\questiondown}
-
- \DeclareUnicodeCharacter{00C0}{\`A}
- \DeclareUnicodeCharacter{00C1}{\'A}
- \DeclareUnicodeCharacter{00C2}{\^A}
- \DeclareUnicodeCharacter{00C3}{\~A}
- \DeclareUnicodeCharacter{00C4}{\"A}
- \DeclareUnicodeCharacter{00C5}{\AA}
- \DeclareUnicodeCharacter{00C6}{\AE}
- \DeclareUnicodeCharacter{00C7}{\cedilla{C}}
- \DeclareUnicodeCharacter{00C8}{\`E}
- \DeclareUnicodeCharacter{00C9}{\'E}
- \DeclareUnicodeCharacter{00CA}{\^E}
- \DeclareUnicodeCharacter{00CB}{\"E}
- \DeclareUnicodeCharacter{00CC}{\`I}
- \DeclareUnicodeCharacter{00CD}{\'I}
- \DeclareUnicodeCharacter{00CE}{\^I}
- \DeclareUnicodeCharacter{00CF}{\"I}
-
- \DeclareUnicodeCharacter{00D0}{\DH}
- \DeclareUnicodeCharacter{00D1}{\~N}
- \DeclareUnicodeCharacter{00D2}{\`O}
- \DeclareUnicodeCharacter{00D3}{\'O}
- \DeclareUnicodeCharacter{00D4}{\^O}
- \DeclareUnicodeCharacter{00D5}{\~O}
- \DeclareUnicodeCharacter{00D6}{\"O}
- \DeclareUnicodeCharacter{00D8}{\O}
- \DeclareUnicodeCharacter{00D9}{\`U}
- \DeclareUnicodeCharacter{00DA}{\'U}
- \DeclareUnicodeCharacter{00DB}{\^U}
- \DeclareUnicodeCharacter{00DC}{\"U}
- \DeclareUnicodeCharacter{00DD}{\'Y}
- \DeclareUnicodeCharacter{00DE}{\TH}
- \DeclareUnicodeCharacter{00DF}{\ss}
-
- \DeclareUnicodeCharacter{00E0}{\`a}
- \DeclareUnicodeCharacter{00E1}{\'a}
- \DeclareUnicodeCharacter{00E2}{\^a}
- \DeclareUnicodeCharacter{00E3}{\~a}
- \DeclareUnicodeCharacter{00E4}{\"a}
- \DeclareUnicodeCharacter{00E5}{\aa}
- \DeclareUnicodeCharacter{00E6}{\ae}
- \DeclareUnicodeCharacter{00E7}{\cedilla{c}}
- \DeclareUnicodeCharacter{00E8}{\`e}
- \DeclareUnicodeCharacter{00E9}{\'e}
- \DeclareUnicodeCharacter{00EA}{\^e}
- \DeclareUnicodeCharacter{00EB}{\"e}
- \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}
- \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}
- \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
- \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
-
- \DeclareUnicodeCharacter{00F0}{\dh}
- \DeclareUnicodeCharacter{00F1}{\~n}
- \DeclareUnicodeCharacter{00F2}{\`o}
- \DeclareUnicodeCharacter{00F3}{\'o}
- \DeclareUnicodeCharacter{00F4}{\^o}
- \DeclareUnicodeCharacter{00F5}{\~o}
- \DeclareUnicodeCharacter{00F6}{\"o}
- \DeclareUnicodeCharacter{00F8}{\o}
- \DeclareUnicodeCharacter{00F9}{\`u}
- \DeclareUnicodeCharacter{00FA}{\'u}
- \DeclareUnicodeCharacter{00FB}{\^u}
- \DeclareUnicodeCharacter{00FC}{\"u}
- \DeclareUnicodeCharacter{00FD}{\'y}
- \DeclareUnicodeCharacter{00FE}{\th}
- \DeclareUnicodeCharacter{00FF}{\"y}
-
- \DeclareUnicodeCharacter{0100}{\=A}
- \DeclareUnicodeCharacter{0101}{\=a}
- \DeclareUnicodeCharacter{0102}{\u{A}}
- \DeclareUnicodeCharacter{0103}{\u{a}}
- \DeclareUnicodeCharacter{0104}{\ogonek{A}}
- \DeclareUnicodeCharacter{0105}{\ogonek{a}}
- \DeclareUnicodeCharacter{0106}{\'C}
- \DeclareUnicodeCharacter{0107}{\'c}
- \DeclareUnicodeCharacter{0108}{\^C}
- \DeclareUnicodeCharacter{0109}{\^c}
- \DeclareUnicodeCharacter{0118}{\ogonek{E}}
- \DeclareUnicodeCharacter{0119}{\ogonek{e}}
- \DeclareUnicodeCharacter{010A}{\dotaccent{C}}
- \DeclareUnicodeCharacter{010B}{\dotaccent{c}}
- \DeclareUnicodeCharacter{010C}{\v{C}}
- \DeclareUnicodeCharacter{010D}{\v{c}}
- \DeclareUnicodeCharacter{010E}{\v{D}}
-
- \DeclareUnicodeCharacter{0112}{\=E}
- \DeclareUnicodeCharacter{0113}{\=e}
- \DeclareUnicodeCharacter{0114}{\u{E}}
- \DeclareUnicodeCharacter{0115}{\u{e}}
- \DeclareUnicodeCharacter{0116}{\dotaccent{E}}
- \DeclareUnicodeCharacter{0117}{\dotaccent{e}}
- \DeclareUnicodeCharacter{011A}{\v{E}}
- \DeclareUnicodeCharacter{011B}{\v{e}}
- \DeclareUnicodeCharacter{011C}{\^G}
- \DeclareUnicodeCharacter{011D}{\^g}
- \DeclareUnicodeCharacter{011E}{\u{G}}
- \DeclareUnicodeCharacter{011F}{\u{g}}
-
- \DeclareUnicodeCharacter{0120}{\dotaccent{G}}
- \DeclareUnicodeCharacter{0121}{\dotaccent{g}}
- \DeclareUnicodeCharacter{0124}{\^H}
- \DeclareUnicodeCharacter{0125}{\^h}
- \DeclareUnicodeCharacter{0128}{\~I}
- \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}
- \DeclareUnicodeCharacter{012A}{\=I}
- \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}
- \DeclareUnicodeCharacter{012C}{\u{I}}
- \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}
-
- \DeclareUnicodeCharacter{0130}{\dotaccent{I}}
- \DeclareUnicodeCharacter{0131}{\dotless{i}}
- \DeclareUnicodeCharacter{0132}{IJ}
- \DeclareUnicodeCharacter{0133}{ij}
- \DeclareUnicodeCharacter{0134}{\^J}
- \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}
- \DeclareUnicodeCharacter{0139}{\'L}
- \DeclareUnicodeCharacter{013A}{\'l}
-
- \DeclareUnicodeCharacter{0141}{\L}
- \DeclareUnicodeCharacter{0142}{\l}
- \DeclareUnicodeCharacter{0143}{\'N}
- \DeclareUnicodeCharacter{0144}{\'n}
- \DeclareUnicodeCharacter{0147}{\v{N}}
- \DeclareUnicodeCharacter{0148}{\v{n}}
- \DeclareUnicodeCharacter{014C}{\=O}
- \DeclareUnicodeCharacter{014D}{\=o}
- \DeclareUnicodeCharacter{014E}{\u{O}}
- \DeclareUnicodeCharacter{014F}{\u{o}}
-
- \DeclareUnicodeCharacter{0150}{\H{O}}
- \DeclareUnicodeCharacter{0151}{\H{o}}
- \DeclareUnicodeCharacter{0152}{\OE}
- \DeclareUnicodeCharacter{0153}{\oe}
- \DeclareUnicodeCharacter{0154}{\'R}
- \DeclareUnicodeCharacter{0155}{\'r}
- \DeclareUnicodeCharacter{0158}{\v{R}}
- \DeclareUnicodeCharacter{0159}{\v{r}}
- \DeclareUnicodeCharacter{015A}{\'S}
- \DeclareUnicodeCharacter{015B}{\'s}
- \DeclareUnicodeCharacter{015C}{\^S}
- \DeclareUnicodeCharacter{015D}{\^s}
- \DeclareUnicodeCharacter{015E}{\cedilla{S}}
- \DeclareUnicodeCharacter{015F}{\cedilla{s}}
-
- \DeclareUnicodeCharacter{0160}{\v{S}}
- \DeclareUnicodeCharacter{0161}{\v{s}}
- \DeclareUnicodeCharacter{0162}{\cedilla{t}}
- \DeclareUnicodeCharacter{0163}{\cedilla{T}}
- \DeclareUnicodeCharacter{0164}{\v{T}}
-
- \DeclareUnicodeCharacter{0168}{\~U}
- \DeclareUnicodeCharacter{0169}{\~u}
- \DeclareUnicodeCharacter{016A}{\=U}
- \DeclareUnicodeCharacter{016B}{\=u}
- \DeclareUnicodeCharacter{016C}{\u{U}}
- \DeclareUnicodeCharacter{016D}{\u{u}}
- \DeclareUnicodeCharacter{016E}{\ringaccent{U}}
- \DeclareUnicodeCharacter{016F}{\ringaccent{u}}
-
- \DeclareUnicodeCharacter{0170}{\H{U}}
- \DeclareUnicodeCharacter{0171}{\H{u}}
- \DeclareUnicodeCharacter{0174}{\^W}
- \DeclareUnicodeCharacter{0175}{\^w}
- \DeclareUnicodeCharacter{0176}{\^Y}
- \DeclareUnicodeCharacter{0177}{\^y}
- \DeclareUnicodeCharacter{0178}{\"Y}
- \DeclareUnicodeCharacter{0179}{\'Z}
- \DeclareUnicodeCharacter{017A}{\'z}
- \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}
- \DeclareUnicodeCharacter{017C}{\dotaccent{z}}
- \DeclareUnicodeCharacter{017D}{\v{Z}}
- \DeclareUnicodeCharacter{017E}{\v{z}}
-
- \DeclareUnicodeCharacter{01C4}{D\v{Z}}
- \DeclareUnicodeCharacter{01C5}{D\v{z}}
- \DeclareUnicodeCharacter{01C6}{d\v{z}}
- \DeclareUnicodeCharacter{01C7}{LJ}
- \DeclareUnicodeCharacter{01C8}{Lj}
- \DeclareUnicodeCharacter{01C9}{lj}
- \DeclareUnicodeCharacter{01CA}{NJ}
- \DeclareUnicodeCharacter{01CB}{Nj}
- \DeclareUnicodeCharacter{01CC}{nj}
- \DeclareUnicodeCharacter{01CD}{\v{A}}
- \DeclareUnicodeCharacter{01CE}{\v{a}}
- \DeclareUnicodeCharacter{01CF}{\v{I}}
-
- \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}
- \DeclareUnicodeCharacter{01D1}{\v{O}}
- \DeclareUnicodeCharacter{01D2}{\v{o}}
- \DeclareUnicodeCharacter{01D3}{\v{U}}
- \DeclareUnicodeCharacter{01D4}{\v{u}}
-
- \DeclareUnicodeCharacter{01E2}{\={\AE}}
- \DeclareUnicodeCharacter{01E3}{\={\ae}}
- \DeclareUnicodeCharacter{01E6}{\v{G}}
- \DeclareUnicodeCharacter{01E7}{\v{g}}
- \DeclareUnicodeCharacter{01E8}{\v{K}}
- \DeclareUnicodeCharacter{01E9}{\v{k}}
-
- \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}
- \DeclareUnicodeCharacter{01F1}{DZ}
- \DeclareUnicodeCharacter{01F2}{Dz}
- \DeclareUnicodeCharacter{01F3}{dz}
- \DeclareUnicodeCharacter{01F4}{\'G}
- \DeclareUnicodeCharacter{01F5}{\'g}
- \DeclareUnicodeCharacter{01F8}{\`N}
- \DeclareUnicodeCharacter{01F9}{\`n}
- \DeclareUnicodeCharacter{01FC}{\'{\AE}}
- \DeclareUnicodeCharacter{01FD}{\'{\ae}}
- \DeclareUnicodeCharacter{01FE}{\'{\O}}
- \DeclareUnicodeCharacter{01FF}{\'{\o}}
-
- \DeclareUnicodeCharacter{021E}{\v{H}}
- \DeclareUnicodeCharacter{021F}{\v{h}}
-
- \DeclareUnicodeCharacter{0226}{\dotaccent{A}}
- \DeclareUnicodeCharacter{0227}{\dotaccent{a}}
- \DeclareUnicodeCharacter{0228}{\cedilla{E}}
- \DeclareUnicodeCharacter{0229}{\cedilla{e}}
- \DeclareUnicodeCharacter{022E}{\dotaccent{O}}
- \DeclareUnicodeCharacter{022F}{\dotaccent{o}}
-
- \DeclareUnicodeCharacter{0232}{\=Y}
- \DeclareUnicodeCharacter{0233}{\=y}
- \DeclareUnicodeCharacter{0237}{\dotless{j}}
-
- \DeclareUnicodeCharacter{02DB}{\ogonek{ }}
-
- \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
- \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
- \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
- \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}
- \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}
- \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}
- \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}
- \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}
- \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}
- \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}
- \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}
- \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}
-
- \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}
- \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}
-
- \DeclareUnicodeCharacter{1E20}{\=G}
- \DeclareUnicodeCharacter{1E21}{\=g}
- \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}
- \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}
- \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}
- \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}
- \DeclareUnicodeCharacter{1E26}{\"H}
- \DeclareUnicodeCharacter{1E27}{\"h}
-
- \DeclareUnicodeCharacter{1E30}{\'K}
- \DeclareUnicodeCharacter{1E31}{\'k}
- \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}
- \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}
- \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}
- \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}
- \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}
- \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}
- \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}
- \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}
- \DeclareUnicodeCharacter{1E3E}{\'M}
- \DeclareUnicodeCharacter{1E3F}{\'m}
-
- \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}
- \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}
- \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}
- \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}
- \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}
- \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}
- \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}
- \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}
- \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}
- \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}
-
- \DeclareUnicodeCharacter{1E54}{\'P}
- \DeclareUnicodeCharacter{1E55}{\'p}
- \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}
- \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}
- \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}
- \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}
- \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}
- \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}
- \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}
- \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}
-
- \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}
- \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}
- \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}
- \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}
- \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}
- \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}
- \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}
- \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}
- \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}
- \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}
-
- \DeclareUnicodeCharacter{1E7C}{\~V}
- \DeclareUnicodeCharacter{1E7D}{\~v}
- \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}
- \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}
-
- \DeclareUnicodeCharacter{1E80}{\`W}
- \DeclareUnicodeCharacter{1E81}{\`w}
- \DeclareUnicodeCharacter{1E82}{\'W}
- \DeclareUnicodeCharacter{1E83}{\'w}
- \DeclareUnicodeCharacter{1E84}{\"W}
- \DeclareUnicodeCharacter{1E85}{\"w}
- \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}
- \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}
- \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}
- \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}
- \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}
- \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}
- \DeclareUnicodeCharacter{1E8C}{\"X}
- \DeclareUnicodeCharacter{1E8D}{\"x}
- \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}
- \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}
-
- \DeclareUnicodeCharacter{1E90}{\^Z}
- \DeclareUnicodeCharacter{1E91}{\^z}
- \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}
- \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}
- \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}
- \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}
- \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}
- \DeclareUnicodeCharacter{1E97}{\"t}
- \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}
- \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}
-
- \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}
- \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}
-
- \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}
- \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}
- \DeclareUnicodeCharacter{1EBC}{\~E}
- \DeclareUnicodeCharacter{1EBD}{\~e}
-
- \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}
- \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}
- \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}
- \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}
-
- \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}
- \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}
-
- \DeclareUnicodeCharacter{1EF2}{\`Y}
- \DeclareUnicodeCharacter{1EF3}{\`y}
- \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}
-
- \DeclareUnicodeCharacter{1EF8}{\~Y}
- \DeclareUnicodeCharacter{1EF9}{\~y}
-
- \DeclareUnicodeCharacter{2013}{--}
- \DeclareUnicodeCharacter{2014}{---}
- \DeclareUnicodeCharacter{2018}{\quoteleft}
- \DeclareUnicodeCharacter{2019}{\quoteright}
- \DeclareUnicodeCharacter{201A}{\quotesinglbase}
- \DeclareUnicodeCharacter{201C}{\quotedblleft}
- \DeclareUnicodeCharacter{201D}{\quotedblright}
- \DeclareUnicodeCharacter{201E}{\quotedblbase}
- \DeclareUnicodeCharacter{2022}{\bullet}
- \DeclareUnicodeCharacter{2026}{\dots}
- \DeclareUnicodeCharacter{2039}{\guilsinglleft}
- \DeclareUnicodeCharacter{203A}{\guilsinglright}
- \DeclareUnicodeCharacter{20AC}{\euro}
-
- \DeclareUnicodeCharacter{2192}{\expansion}
- \DeclareUnicodeCharacter{21D2}{\result}
-
- \DeclareUnicodeCharacter{2212}{\minus}
- \DeclareUnicodeCharacter{2217}{\point}
- \DeclareUnicodeCharacter{2261}{\equiv}
-}% end of \utfeightchardefs
-
-
-% US-ASCII character definitions.
-\def\asciichardefs{% nothing need be done
- \relax
-}
-
-% Make non-ASCII characters printable again for compatibility with
-% existing Texinfo documents that may use them, even without declaring a
-% document encoding.
-%
-\setnonasciicharscatcode \other
-
-
-\message{formatting,}
-
-\newdimen\defaultparindent \defaultparindent = 15pt
-
-\chapheadingskip = 15pt plus 4pt minus 2pt
-\secheadingskip = 12pt plus 3pt minus 2pt
-\subsecheadingskip = 9pt plus 2pt minus 2pt
-
-% Prevent underfull vbox error messages.
-\vbadness = 10000
-
-% Don't be very finicky about underfull hboxes, either.
-\hbadness = 6666
-
-% Following George Bush, get rid of widows and orphans.
-\widowpenalty=10000
-\clubpenalty=10000
-
-% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
-% using an old version of TeX, don't do anything. We want the amount of
-% stretch added to depend on the line length, hence the dependence on
-% \hsize. We call this whenever the paper size is set.
-%
-\def\setemergencystretch{%
- \ifx\emergencystretch\thisisundefined
- % Allow us to assign to \emergencystretch anyway.
- \def\emergencystretch{\dimen0}%
- \else
- \emergencystretch = .15\hsize
- \fi
-}
-
-% Parameters in order: 1) textheight; 2) textwidth;
-% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
-% 7) physical page height; 8) physical page width.
-%
-% We also call \setleading{\textleading}, so the caller should define
-% \textleading. The caller should also set \parskip.
-%
-\def\internalpagesizes#1#2#3#4#5#6#7#8{%
- \voffset = #3\relax
- \topskip = #6\relax
- \splittopskip = \topskip
- %
- \vsize = #1\relax
- \advance\vsize by \topskip
- \outervsize = \vsize
- \advance\outervsize by 2\topandbottommargin
- \pageheight = \vsize
- %
- \hsize = #2\relax
- \outerhsize = \hsize
- \advance\outerhsize by 0.5in
- \pagewidth = \hsize
- %
- \normaloffset = #4\relax
- \bindingoffset = #5\relax
- %
- \ifpdf
- \pdfpageheight #7\relax
- \pdfpagewidth #8\relax
- % if we don't reset these, they will remain at "1 true in" of
- % whatever layout pdftex was dumped with.
- \pdfhorigin = 1 true in
- \pdfvorigin = 1 true in
- \fi
- %
- \setleading{\textleading}
- %
- \parindent = \defaultparindent
- \setemergencystretch
-}
-
-% @letterpaper (the default).
-\def\letterpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % If page is nothing but text, make it come out even.
- \internalpagesizes{607.2pt}{6in}% that's 46 lines
- {\voffset}{.25in}%
- {\bindingoffset}{36pt}%
- {11in}{8.5in}%
-}}
-
-% Use @smallbook to reset parameters for 7x9.25 trim size.
-\def\smallbook{{\globaldefs = 1
- \parskip = 2pt plus 1pt
- \textleading = 12pt
- %
- \internalpagesizes{7.5in}{5in}%
- {-.2in}{0in}%
- {\bindingoffset}{16pt}%
- {9.25in}{7in}%
- %
- \lispnarrowing = 0.3in
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = .5cm
-}}
-
-% Use @smallerbook to reset parameters for 6x9 trim size.
-% (Just testing, parameters still in flux.)
-\def\smallerbook{{\globaldefs = 1
- \parskip = 1.5pt plus 1pt
- \textleading = 12pt
- %
- \internalpagesizes{7.4in}{4.8in}%
- {-.2in}{-.4in}%
- {0pt}{14pt}%
- {9in}{6in}%
- %
- \lispnarrowing = 0.25in
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = .4cm
-}}
-
-% Use @afourpaper to print on European A4 paper.
-\def\afourpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % Double-side printing via postscript on Laserjet 4050
- % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
- % To change the settings for a different printer or situation, adjust
- % \normaloffset until the front-side and back-side texts align. Then
- % do the same for \bindingoffset. You can set these for testing in
- % your texinfo source file like this:
- % @tex
- % \global\normaloffset = -6mm
- % \global\bindingoffset = 10mm
- % @end tex
- \internalpagesizes{673.2pt}{160mm}% that's 51 lines
- {\voffset}{\hoffset}%
- {\bindingoffset}{44pt}%
- {297mm}{210mm}%
- %
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \defbodyindent = 5mm
-}}
-
-% Use @afivepaper to print on European A5 paper.
-% From romildo@urano.iceb.ufop.br, 2 July 2000.
-% He also recommends making @example and @lisp be small.
-\def\afivepaper{{\globaldefs = 1
- \parskip = 2pt plus 1pt minus 0.1pt
- \textleading = 12.5pt
- %
- \internalpagesizes{160mm}{120mm}%
- {\voffset}{\hoffset}%
- {\bindingoffset}{8pt}%
- {210mm}{148mm}%
- %
- \lispnarrowing = 0.2in
- \tolerance = 800
- \hfuzz = 1.2pt
- \contentsrightmargin = 0pt
- \defbodyindent = 2mm
- \tableindent = 12mm
-}}
-
-% A specific text layout, 24x15cm overall, intended for A4 paper.
-\def\afourlatex{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{237mm}{150mm}%
- {\voffset}{4.6mm}%
- {\bindingoffset}{7mm}%
- {297mm}{210mm}%
- %
- % Must explicitly reset to 0 because we call \afourpaper.
- \globaldefs = 0
-}}
-
-% Use @afourwide to print on A4 paper in landscape format.
-\def\afourwide{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{241mm}{165mm}%
- {\voffset}{-2.95mm}%
- {\bindingoffset}{7mm}%
- {297mm}{210mm}%
- \globaldefs = 0
-}}
-
-% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
-% Perhaps we should allow setting the margins, \topskip, \parskip,
-% and/or leading, also. Or perhaps we should compute them somehow.
-%
-\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
-\def\pagesizesyyy#1,#2,#3\finish{{%
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
- \globaldefs = 1
- %
- \parskip = 3pt plus 2pt minus 1pt
- \setleading{\textleading}%
- %
- \dimen0 = #1\relax
- \advance\dimen0 by \voffset
- %
- \dimen2 = \hsize
- \advance\dimen2 by \normaloffset
- %
- \internalpagesizes{#1}{\hsize}%
- {\voffset}{\normaloffset}%
- {\bindingoffset}{44pt}%
- {\dimen0}{\dimen2}%
-}}
-
-% Set default to letter.
-%
-\letterpaper
-
-
-\message{and turning on texinfo input format.}
-
-\def^^L{\par} % remove \outer, so ^L can appear in an @comment
-
-% DEL is a comment character, in case @c does not suffice.
-\catcode`\^^? = 14
-
-% Define macros to output various characters with catcode for normal text.
-\catcode`\"=\other \def\normaldoublequote{"}
-\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix
-\catcode`\+=\other \def\normalplus{+}
-\catcode`\<=\other \def\normalless{<}
-\catcode`\>=\other \def\normalgreater{>}
-\catcode`\^=\other \def\normalcaret{^}
-\catcode`\_=\other \def\normalunderscore{_}
-\catcode`\|=\other \def\normalverticalbar{|}
-\catcode`\~=\other \def\normaltilde{~}
-
-% This macro is used to make a character print one way in \tt
-% (where it can probably be output as-is), and another way in other fonts,
-% where something hairier probably needs to be done.
-%
-% #1 is what to print if we are indeed using \tt; #2 is what to print
-% otherwise. Since all the Computer Modern typewriter fonts have zero
-% interword stretch (and shrink), and it is reasonable to expect all
-% typewriter fonts to have this, we can check that font parameter.
-%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
-
-% Same as above, but check for italic font. Actually this also catches
-% non-italic slanted fonts since it is impossible to distinguish them from
-% italic fonts. But since this is only used by $ and it uses \sl anyway
-% this is not a problem.
-\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
-
-% Turn off all special characters except @
-% (and those which the user can use as if they were ordinary).
-% Most of these we simply print from the \tt font, but for some, we can
-% use math or other variants that look better in normal text.
-
-\catcode`\"=\active
-\def\activedoublequote{{\tt\char34}}
-\let"=\activedoublequote
-\catcode`\~=\active
-\def~{{\tt\char126}}
-\chardef\hat=`\^
-\catcode`\^=\active
-\def^{{\tt \hat}}
-
-\catcode`\_=\active
-\def_{\ifusingtt\normalunderscore\_}
-\let\realunder=_
-% Subroutine for the previous macro.
-\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
-
-\catcode`\|=\active
-\def|{{\tt\char124}}
-\chardef \less=`\<
-\catcode`\<=\active
-\def<{{\tt \less}}
-\chardef \gtr=`\>
-\catcode`\>=\active
-\def>{{\tt \gtr}}
-\catcode`\+=\active
-\def+{{\tt \char 43}}
-\catcode`\$=\active
-\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
-
-% If a .fmt file is being used, characters that might appear in a file
-% name cannot be active until we have parsed the command line.
-% So turn them off again, and have \everyjob (or @setfilename) turn them on.
-% \otherifyactive is called near the end of this file.
-\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
-
-% Used sometimes to turn off (effectively) the active characters even after
-% parsing them.
-\def\turnoffactive{%
- \normalturnoffactive
- \otherbackslash
-}
-
-\catcode`\@=0
-
-% \backslashcurfont outputs one backslash character in current font,
-% as in \char`\\.
-\global\chardef\backslashcurfont=`\\
-\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work
-
-% \realbackslash is an actual character `\' with catcode other, and
-% \doublebackslash is two of them (for the pdf outlines).
-{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
-
-% In texinfo, backslash is an active character; it prints the backslash
-% in fixed width font.
-\catcode`\\=\active % @ for escape char from now on.
-
-% The story here is that in math mode, the \char of \backslashcurfont
-% ends up printing the roman \ from the math symbol font (because \char
-% in math mode uses the \mathcode, and plain.tex sets
-% \mathcode`\\="026E). It seems better for @backslashchar{} to always
-% print a typewriter backslash, hence we use an explicit \mathchar,
-% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
-% ignored family value; char position "5C). We can't use " for the
-% usual hex value because it has already been made active.
-@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
-@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents.
-
-% On startup, @fixbackslash assigns:
-% @let \ = @normalbackslash
-% \rawbackslash defines an active \ to do \backslashcurfont.
-% \otherbackslash defines an active \ to be a literal `\' character with
-% catcode other. We switch back and forth between these.
-@gdef@rawbackslash{@let\=@backslashcurfont}
-@gdef@otherbackslash{@let\=@realbackslash}
-
-% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'.
-%
-@def@normalturnoffactive{%
- @let"=@normaldoublequote
- @let$=@normaldollar %$ font-lock fix
- @let+=@normalplus
- @let<=@normalless
- @let>=@normalgreater
- @let\=@normalbackslash
- @let^=@normalcaret
- @let_=@normalunderscore
- @let|=@normalverticalbar
- @let~=@normaltilde
- @markupsetuplqdefault
- @markupsetuprqdefault
- @unsepspaces
-}
-
-% Make _ and + \other characters, temporarily.
-% This is canceled by @fixbackslash.
-@otherifyactive
-
-% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
-% That is what \eatinput is for; after that, the `\' should revert to printing
-% a backslash.
-%
-@gdef@eatinput input texinfo{@fixbackslash}
-@global@let\ = @eatinput
-
-% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\' in the file would cause an error. This macro tries to fix
-% that, assuming it is called before the first `\' could plausibly occur.
-% Also turn back on active characters that might appear in the input
-% file name, in case not using a pre-dumped format.
-%
-@gdef@fixbackslash{%
- @ifx\@eatinput @let\ = @normalbackslash @fi
- @catcode`+=@active
- @catcode`@_=@active
-}
-
-% Say @foo, not \foo, in error messages.
-@escapechar = `@@
-
-% These (along with & and #) are made active for url-breaking, so need
-% active definitions as the normal characters.
-@def@normaldot{.}
-@def@normalquest{?}
-@def@normalslash{/}
-
-% These look ok in all fonts, so just make them not special.
-% @hashchar{} gets its own user-level command, because of #line.
-@catcode`@& = @other @def@normalamp{&}
-@catcode`@# = @other @def@normalhash{#}
-@catcode`@% = @other @def@normalpercent{%}
-
-@let @hashchar = @normalhash
-
-@c Finally, make ` and ' active, so that txicodequoteundirected and
-@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we
-@c don't make ` and ' active, @code will not get them as active chars.
-@c Do this last of all since we use ` in the previous @catcode assignments.
-@catcode`@'=@active
-@catcode`@`=@active
-@markupsetuplqdefault
-@markupsetuprqdefault
-
-@c Local variables:
-@c eval: (add-hook 'write-file-hooks 'time-stamp)
-@c page-delimiter: "^\\\\message"
-@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d.%02H"
-@c time-stamp-end: "}"
-@c End:
-
-@c vim:sw=2:
-
-@ignore
- arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
-@end ignore
+++ /dev/null
-eval '(exit $?0)' && eval 'exec perl -wST "$0" ${1+"$@"}'
- & eval 'exec perl -wST "$0" $argv:q'
- if 0;
-# Detect instances of "if (p) free (p);".
-# Likewise "if (p != 0)", "if (0 != p)", or with NULL; and with braces.
-
-my $VERSION = '2012-01-06 07:23'; # UTC
-# The definition above must lie within the first 8 lines in order
-# for the Emacs time-stamp write hook (at end) to update it.
-# If you change this file with Emacs, please let the write hook
-# do its job. Otherwise, update this string manually.
-
-# Copyright (C) 2008-2012 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# Written by Jim Meyering
-
-use strict;
-use warnings;
-use Getopt::Long;
-
-(my $ME = $0) =~ s|.*/||;
-
-# use File::Coda; # http://meyering.net/code/Coda/
-END {
- defined fileno STDOUT or return;
- close STDOUT and return;
- warn "$ME: failed to close standard output: $!\n";
- $? ||= 1;
-}
-
-sub usage ($)
-{
- my ($exit_code) = @_;
- my $STREAM = ($exit_code == 0 ? *STDOUT : *STDERR);
- if ($exit_code != 0)
- {
- print $STREAM "Try '$ME --help' for more information.\n";
- }
- else
- {
- print $STREAM <<EOF;
-Usage: $ME [OPTIONS] FILE...
-
-Detect any instance in FILE of a useless "if" test before a free call, e.g.,
-"if (p) free (p);". Any such test may be safely removed without affecting
-the semantics of the C code in FILE. Use --name=FOO --name=BAR to also
-detect free-like functions named FOO and BAR.
-
-OPTIONS:
-
- --list print only the name of each matching FILE (\\0-terminated)
- --name=N add name N to the list of \'free\'-like functions to detect;
- may be repeated
-
- --help display this help and exit
- --version output version information and exit
-
-Exit status:
-
- 0 one or more matches
- 1 no match
- 2 an error
-
-EXAMPLE:
-
-For example, this command prints all removable "if" tests before "free"
-and "kfree" calls in the linux kernel sources:
-
- git ls-files -z |xargs -0 $ME --name=kfree
-
-EOF
- }
- exit $exit_code;
-}
-
-sub is_NULL ($)
-{
- my ($expr) = @_;
- return ($expr eq 'NULL' || $expr eq '0');
-}
-
-{
- sub EXIT_MATCH {0}
- sub EXIT_NO_MATCH {1}
- sub EXIT_ERROR {2}
- my $err = EXIT_NO_MATCH;
-
- my $list;
- my @name = qw(free);
- GetOptions
- (
- help => sub { usage 0 },
- version => sub { print "$ME version $VERSION\n"; exit },
- list => \$list,
- 'name=s@' => \@name,
- ) or usage 1;
-
- # Make sure we have the right number of non-option arguments.
- # Always tell the user why we fail.
- @ARGV < 1
- and (warn "$ME: missing FILE argument\n"), usage EXIT_ERROR;
-
- my $or = join '|', @name;
- my $regexp = qr/(?:$or)/;
-
- # Set the input record separator.
- # Note: this makes it impractical to print line numbers.
- $/ = '"';
-
- my $found_match = 0;
- FILE:
- foreach my $file (@ARGV)
- {
- open FH, '<', $file
- or (warn "$ME: can't open '$file' for reading: $!\n"),
- $err = EXIT_ERROR, next;
- while (defined (my $line = <FH>))
- {
- while ($line =~
- /\b(if\s*\(\s*([^)]+?)(?:\s*!=\s*([^)]+?))?\s*\)
- # 1 2 3
- (?: \s*$regexp\s*\((?:\s*\([^)]+\))?\s*([^)]+)\)\s*;|
- \s*\{\s*$regexp\s*\((?:\s*\([^)]+\))?\s*([^)]+)\)\s*;\s*\}))/sxg)
- {
- my $all = $1;
- my ($lhs, $rhs) = ($2, $3);
- my ($free_opnd, $braced_free_opnd) = ($4, $5);
- my $non_NULL;
- if (!defined $rhs) { $non_NULL = $lhs }
- elsif (is_NULL $rhs) { $non_NULL = $lhs }
- elsif (is_NULL $lhs) { $non_NULL = $rhs }
- else { next }
-
- # Compare the non-NULL part of the "if" expression and the
- # free'd expression, without regard to white space.
- $non_NULL =~ tr/ \t//d;
- my $e2 = defined $free_opnd ? $free_opnd : $braced_free_opnd;
- $e2 =~ tr/ \t//d;
- if ($non_NULL eq $e2)
- {
- $found_match = 1;
- $list
- and (print "$file\0"), next FILE;
- print "$file: $all\n";
- }
- }
- }
- }
- continue
- {
- close FH;
- }
-
- $found_match && $err == EXIT_NO_MATCH
- and $err = EXIT_MATCH;
-
- exit $err;
-}
-
-my $foo = <<'EOF';
-# The above is to *find* them.
-# This adjusts them, removing the unnecessary "if (p)" part.
-
-# FIXME: do something like this as an option (doesn't do braces):
-free=xfree
-git grep -l -z "$free *(" \
- | xargs -0 useless-if-before-free -l --name="$free" \
- | xargs -0 perl -0x3b -pi -e \
- 's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*(?:0|NULL))?\s*\)\s+('"$free"'\s*\((?:\s*\([^)]+\))?\s*\1\s*\)\s*;)/$2/s'
-
-# Use the following to remove redundant uses of kfree inside braces.
-# Note that -0777 puts perl in slurp-whole-file mode;
-# but we have plenty of memory, these days...
-free=kfree
-git grep -l -z "$free *(" \
- | xargs -0 useless-if-before-free -l --name="$free" \
- | xargs -0 perl -0777 -pi -e \
- 's/\bif\s*\(\s*(\S+?)(?:\s*!=\s*(?:0|NULL))?\s*\)\s*\{\s*('"$free"'\s*\((?:\s*\([^)]+\))?\s*\1\s*\);)\s*\}[^\n]*$/$2/gms'
-
-Be careful that the result of the above transformation is valid.
-If the matched string is followed by "else", then obviously, it won't be.
-
-When modifying files, refuse to process anything other than a regular file.
-EOF
-
-## Local Variables:
-## mode: perl
-## indent-tabs-mode: nil
-## eval: (add-hook 'write-file-hooks 'time-stamp)
-## time-stamp-start: "my $VERSION = '"
-## time-stamp-format: "%:y-%02m-%02d %02H:%02M"
-## time-stamp-time-zone: "UTC"
-## time-stamp-end: "'; # UTC"
-## End:
+++ /dev/null
-#!/bin/sh
-# List version-controlled file names.
-
-# Print a version string.
-scriptversion=2011-05-16.22; # UTC
-
-# Copyright (C) 2006-2012 Free Software Foundation, Inc.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-
-# List the specified version-controlled files.
-# With no argument, list them all. With a single DIRECTORY argument,
-# list the version-controlled files in that directory.
-
-# If there's an argument, it must be a single, "."-relative directory name.
-# cvsu is part of the cvsutils package: http://www.red-bean.com/cvsutils/
-
-postprocess=
-case $1 in
- --help) cat <<EOF
-Usage: $0 [-C SRCDIR] [DIR...]
-
-Output a list of version-controlled files in DIR (default .), relative to
-SRCDIR (default .). SRCDIR must be the top directory of a checkout.
-
-Options:
- --help print this help, then exit
- --version print version number, then exit
- -C SRCDIR change directory to SRCDIR before generating list
-
-Report bugs and patches to <bug-gnulib@gnu.org>.
-EOF
- exit ;;
-
- --version)
- year=`echo "$scriptversion" | sed 's/[^0-9].*//'`
- cat <<EOF
-vc-list-files $scriptversion
-Copyright (C) $year Free Software Foundation, Inc,
-License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
-This is free software: you are free to change and redistribute it.
-There is NO WARRANTY, to the extent permitted by law.
-EOF
- exit ;;
-
- -C)
- test "$2" = . || postprocess="| sed 's|^|$2/|'"
- cd "$2" || exit 1
- shift; shift ;;
-esac
-
-test $# = 0 && set .
-
-for dir
-do
- if test -d .git; then
- test "x$dir" = x. \
- && dir= sed_esc= \
- || { dir="$dir/"; sed_esc=`echo "$dir"|env sed 's,\([\\/]\),\\\\\1,g'`; }
- # Ignore git symlinks - either they point into the tree, in which case
- # we don't need to visit the target twice, or they point somewhere
- # else (often into a submodule), in which case the content does not
- # belong to this package.
- eval exec git ls-tree -r 'HEAD:"$dir"' \
- \| sed -n '"s/^100[^ ]*./$sed_esc/p"' $postprocess
- elif test -d .hg; then
- eval exec hg locate '"$dir/*"' $postprocess
- elif test -d .bzr; then
- test "$postprocess" = '' && postprocess="| sed 's|^\./||'"
- eval exec bzr ls -R --versioned '"$dir"' $postprocess
- elif test -d CVS; then
- test "$postprocess" = '' && postprocess="| sed 's|^\./||'"
- if test -x build-aux/cvsu; then
- eval build-aux/cvsu --find --types=AFGM '"$dir"' $postprocess
- elif (cvsu --help) >/dev/null 2>&1; then
- eval cvsu --find --types=AFGM '"$dir"' $postprocess
- else
- eval awk -F/ \''{ \
- if (!$1 && $3 !~ /^-/) { \
- f=FILENAME; \
- if (f ~ /CVS\/Entries$/) \
- f = substr(f, 1, length(f)-11); \
- print f $2; \
- }}'\'' \
- `find "$dir" -name Entries -print` /dev/null' $postprocess
- fi
- elif test -d .svn; then
- eval exec svn list -R '"$dir"' $postprocess
- else
- echo "$0: Failed to determine type of version control used in `pwd`" 1>&2
- exit 1
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
+++ /dev/null
-/* config.in. Generated from configure.ac by autoheader. */
-
-/* Define to 1 if translation of program messages to the user's native
- language is requested. */
-#undef ENABLE_NLS
-
-/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
- whether the gnulib module close-stream shall be considered present. */
-#undef GNULIB_CLOSE_STREAM
-
-/* Define to a C preprocessor expression that evaluates to 1 or 0, depending
- whether the gnulib module strerror shall be considered present. */
-#undef GNULIB_STRERROR
-
-/* Define to 1 when the gnulib module getopt-gnu should be tested. */
-#undef GNULIB_TEST_GETOPT_GNU
-
-/* Define to 1 when the gnulib module mbrtowc should be tested. */
-#undef GNULIB_TEST_MBRTOWC
-
-/* Define to 1 when the gnulib module mbsinit should be tested. */
-#undef GNULIB_TEST_MBSINIT
-
-/* Define to 1 when the gnulib module strerror should be tested. */
-#undef GNULIB_TEST_STRERROR
-
-/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the
- CoreFoundation framework. */
-#undef HAVE_CFLOCALECOPYCURRENT
-
-/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in
- the CoreFoundation framework. */
-#undef HAVE_CFPREFERENCESCOPYAPPVALUE
-
-/* Define if the GNU dcgettext() function is already present or preinstalled.
- */
-#undef HAVE_DCGETTEXT
-
-/* Define to 1 if you have the declaration of `getc_unlocked', and to 0 if you
- don't. */
-#undef HAVE_DECL_GETC_UNLOCKED
-
-/* Define to 1 if you have the declaration of `getenv', and to 0 if you don't.
- */
-#undef HAVE_DECL_GETENV
-
-/* Define to 1 if you have the declaration of `mbrtowc', and to 0 if you
- don't. */
-#undef HAVE_DECL_MBRTOWC
-
-/* Define to 1 if you have the declaration of `mbsinit', and to 0 if you
- don't. */
-#undef HAVE_DECL_MBSINIT
-
-/* Define to 1 if you have the declaration of `program_invocation_name', and
- to 0 if you don't. */
-#undef HAVE_DECL_PROGRAM_INVOCATION_NAME
-
-/* Define to 1 if you have the declaration of `program_invocation_short_name',
- and to 0 if you don't. */
-#undef HAVE_DECL_PROGRAM_INVOCATION_SHORT_NAME
-
-/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you
- don't. */
-#undef HAVE_DECL_STRERROR_R
-
-/* Define to 1 if you have the declaration of `towlower', and to 0 if you
- don't. */
-#undef HAVE_DECL_TOWLOWER
-
-/* Define to 1 if you have the declaration of `__fpending', and to 0 if you
- don't. */
-#undef HAVE_DECL___FPENDING
-
-/* Define to 1 if you have the <features.h> header file. */
-#undef HAVE_FEATURES_H
-
-/* Define to 1 if you have the <getopt.h> header file. */
-#undef HAVE_GETOPT_H
-
-/* Define to 1 if you have the `getopt_long_only' function. */
-#undef HAVE_GETOPT_LONG_ONLY
-
-/* Define if the GNU gettext() function is already present or preinstalled. */
-#undef HAVE_GETTEXT
-
-/* Define if you have the iconv() function and it works. */
-#undef HAVE_ICONV
-
-/* Define to 1 if the compiler supports one of the keywords 'inline',
- '__inline__', '__inline' and effectively inlines functions marked as such.
- */
-#undef HAVE_INLINE
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `iswcntrl' function. */
-#undef HAVE_ISWCNTRL
-
-/* Define if you have <langinfo.h> and nl_langinfo(CODESET). */
-#undef HAVE_LANGINFO_CODESET
-
-/* Define to 1 if you have the `mbrtowc' function. */
-#undef HAVE_MBRTOWC
-
-/* Define to 1 if you have the `mbsinit' function. */
-#undef HAVE_MBSINIT
-
-/* Define to 1 if <wchar.h> declares mbstate_t. */
-#undef HAVE_MBSTATE_T
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 on MSVC platforms that have the "invalid parameter handler"
- concept. */
-#undef HAVE_MSVC_INVALID_PARAMETER_HANDLER
-
-/* Define to 1 if atoll is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_ATOLL
-
-/* Define to 1 if btowc is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_BTOWC
-
-/* Define to 1 if canonicalize_file_name is declared even after undefining
- macros. */
-#undef HAVE_RAW_DECL_CANONICALIZE_FILE_NAME
-
-/* Define to 1 if chdir is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_CHDIR
-
-/* Define to 1 if chown is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_CHOWN
-
-/* Define to 1 if dup is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_DUP
-
-/* Define to 1 if dup2 is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_DUP2
-
-/* Define to 1 if dup3 is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_DUP3
-
-/* Define to 1 if endusershell is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_ENDUSERSHELL
-
-/* Define to 1 if environ is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_ENVIRON
-
-/* Define to 1 if euidaccess is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_EUIDACCESS
-
-/* Define to 1 if faccessat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_FACCESSAT
-
-/* Define to 1 if fchdir is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_FCHDIR
-
-/* Define to 1 if fchownat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_FCHOWNAT
-
-/* Define to 1 if fdatasync is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_FDATASYNC
-
-/* Define to 1 if ffsl is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_FFSL
-
-/* Define to 1 if ffsll is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_FFSLL
-
-/* Define to 1 if fsync is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_FSYNC
-
-/* Define to 1 if ftruncate is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_FTRUNCATE
-
-/* Define to 1 if getcwd is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETCWD
-
-/* Define to 1 if getdomainname is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETDOMAINNAME
-
-/* Define to 1 if getdtablesize is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETDTABLESIZE
-
-/* Define to 1 if getgroups is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETGROUPS
-
-/* Define to 1 if gethostname is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETHOSTNAME
-
-/* Define to 1 if getloadavg is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETLOADAVG
-
-/* Define to 1 if getlogin is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETLOGIN
-
-/* Define to 1 if getlogin_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETLOGIN_R
-
-/* Define to 1 if getpagesize is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETPAGESIZE
-
-/* Define to 1 if getsubopt is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETSUBOPT
-
-/* Define to 1 if getusershell is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GETUSERSHELL
-
-/* Define to 1 if grantpt is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GRANTPT
-
-/* Define to 1 if group_member is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_GROUP_MEMBER
-
-/* Define to 1 if initstate is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_INITSTATE
-
-/* Define to 1 if initstate_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_INITSTATE_R
-
-/* Define to 1 if isatty is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_ISATTY
-
-/* Define to 1 if iswctype is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_ISWCTYPE
-
-/* Define to 1 if lchown is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_LCHOWN
-
-/* Define to 1 if link is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_LINK
-
-/* Define to 1 if linkat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_LINKAT
-
-/* Define to 1 if lseek is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_LSEEK
-
-/* Define to 1 if mbrlen is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MBRLEN
-
-/* Define to 1 if mbrtowc is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MBRTOWC
-
-/* Define to 1 if mbsinit is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MBSINIT
-
-/* Define to 1 if mbsnrtowcs is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MBSNRTOWCS
-
-/* Define to 1 if mbsrtowcs is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MBSRTOWCS
-
-/* Define to 1 if memmem is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MEMMEM
-
-/* Define to 1 if mempcpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MEMPCPY
-
-/* Define to 1 if memrchr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MEMRCHR
-
-/* Define to 1 if mkdtemp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MKDTEMP
-
-/* Define to 1 if mkostemp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MKOSTEMP
-
-/* Define to 1 if mkostemps is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MKOSTEMPS
-
-/* Define to 1 if mkstemp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MKSTEMP
-
-/* Define to 1 if mkstemps is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_MKSTEMPS
-
-/* Define to 1 if pipe is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_PIPE
-
-/* Define to 1 if pipe2 is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_PIPE2
-
-/* Define to 1 if posix_openpt is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_POSIX_OPENPT
-
-/* Define to 1 if pread is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_PREAD
-
-/* Define to 1 if ptsname is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_PTSNAME
-
-/* Define to 1 if ptsname_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_PTSNAME_R
-
-/* Define to 1 if pwrite is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_PWRITE
-
-/* Define to 1 if random is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_RANDOM
-
-/* Define to 1 if random_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_RANDOM_R
-
-/* Define to 1 if rawmemchr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_RAWMEMCHR
-
-/* Define to 1 if readlink is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_READLINK
-
-/* Define to 1 if readlinkat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_READLINKAT
-
-/* Define to 1 if realpath is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_REALPATH
-
-/* Define to 1 if rmdir is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_RMDIR
-
-/* Define to 1 if rpmatch is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_RPMATCH
-
-/* Define to 1 if setenv is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SETENV
-
-/* Define to 1 if sethostname is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SETHOSTNAME
-
-/* Define to 1 if setstate is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SETSTATE
-
-/* Define to 1 if setstate_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SETSTATE_R
-
-/* Define to 1 if setusershell is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SETUSERSHELL
-
-/* Define to 1 if sleep is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SLEEP
-
-/* Define to 1 if srandom is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SRANDOM
-
-/* Define to 1 if srandom_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SRANDOM_R
-
-/* Define to 1 if stpcpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STPCPY
-
-/* Define to 1 if stpncpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STPNCPY
-
-/* Define to 1 if strcasestr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRCASESTR
-
-/* Define to 1 if strchrnul is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRCHRNUL
-
-/* Define to 1 if strdup is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRDUP
-
-/* Define to 1 if strerror_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRERROR_R
-
-/* Define to 1 if strncat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRNCAT
-
-/* Define to 1 if strndup is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRNDUP
-
-/* Define to 1 if strnlen is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRNLEN
-
-/* Define to 1 if strpbrk is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRPBRK
-
-/* Define to 1 if strsep is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRSEP
-
-/* Define to 1 if strsignal is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRSIGNAL
-
-/* Define to 1 if strtod is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRTOD
-
-/* Define to 1 if strtok_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRTOK_R
-
-/* Define to 1 if strtoll is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRTOLL
-
-/* Define to 1 if strtoull is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRTOULL
-
-/* Define to 1 if strverscmp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_STRVERSCMP
-
-/* Define to 1 if symlink is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SYMLINK
-
-/* Define to 1 if symlinkat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_SYMLINKAT
-
-/* Define to 1 if towctrans is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_TOWCTRANS
-
-/* Define to 1 if ttyname_r is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_TTYNAME_R
-
-/* Define to 1 if unlink is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_UNLINK
-
-/* Define to 1 if unlinkat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_UNLINKAT
-
-/* Define to 1 if unlockpt is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_UNLOCKPT
-
-/* Define to 1 if unsetenv is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_UNSETENV
-
-/* Define to 1 if usleep is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_USLEEP
-
-/* Define to 1 if wcpcpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCPCPY
-
-/* Define to 1 if wcpncpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCPNCPY
-
-/* Define to 1 if wcrtomb is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCRTOMB
-
-/* Define to 1 if wcscasecmp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSCASECMP
-
-/* Define to 1 if wcscat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSCAT
-
-/* Define to 1 if wcschr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSCHR
-
-/* Define to 1 if wcscmp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSCMP
-
-/* Define to 1 if wcscoll is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSCOLL
-
-/* Define to 1 if wcscpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSCPY
-
-/* Define to 1 if wcscspn is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSCSPN
-
-/* Define to 1 if wcsdup is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSDUP
-
-/* Define to 1 if wcslen is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSLEN
-
-/* Define to 1 if wcsncasecmp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSNCASECMP
-
-/* Define to 1 if wcsncat is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSNCAT
-
-/* Define to 1 if wcsncmp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSNCMP
-
-/* Define to 1 if wcsncpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSNCPY
-
-/* Define to 1 if wcsnlen is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSNLEN
-
-/* Define to 1 if wcsnrtombs is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSNRTOMBS
-
-/* Define to 1 if wcspbrk is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSPBRK
-
-/* Define to 1 if wcsrchr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSRCHR
-
-/* Define to 1 if wcsrtombs is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSRTOMBS
-
-/* Define to 1 if wcsspn is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSSPN
-
-/* Define to 1 if wcsstr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSSTR
-
-/* Define to 1 if wcstok is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSTOK
-
-/* Define to 1 if wcswidth is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSWIDTH
-
-/* Define to 1 if wcsxfrm is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCSXFRM
-
-/* Define to 1 if wctob is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCTOB
-
-/* Define to 1 if wctrans is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCTRANS
-
-/* Define to 1 if wctype is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCTYPE
-
-/* Define to 1 if wcwidth is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WCWIDTH
-
-/* Define to 1 if wmemchr is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WMEMCHR
-
-/* Define to 1 if wmemcmp is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WMEMCMP
-
-/* Define to 1 if wmemcpy is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WMEMCPY
-
-/* Define to 1 if wmemmove is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WMEMMOVE
-
-/* Define to 1 if wmemset is declared even after undefining macros. */
-#undef HAVE_RAW_DECL_WMEMSET
-
-/* Define to 1 if _Exit is declared even after undefining macros. */
-#undef HAVE_RAW_DECL__EXIT
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdio_ext.h> header file. */
-#undef HAVE_STDIO_EXT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strerror_r' function. */
-#undef HAVE_STRERROR_R
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the `symlink' function. */
-#undef HAVE_SYMLINK
-
-/* Define to 1 if you have the <sys/socket.h> header file. */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the `towlower' function. */
-#undef HAVE_TOWLOWER
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the <wchar.h> header file. */
-#undef HAVE_WCHAR_H
-
-/* Define if you have the 'wchar_t' type. */
-#undef HAVE_WCHAR_T
-
-/* Define to 1 if you have the <wctype.h> header file. */
-#undef HAVE_WCTYPE_H
-
-/* Define to 1 if you have the <winsock2.h> header file. */
-#undef HAVE_WINSOCK2_H
-
-/* Define if you have the 'wint_t' type. */
-#undef HAVE_WINT_T
-
-/* Define to 1 if O_NOATIME works. */
-#undef HAVE_WORKING_O_NOATIME
-
-/* Define to 1 if O_NOFOLLOW works. */
-#undef HAVE_WORKING_O_NOFOLLOW
-
-/* Define to 1 if the system has the type `_Bool'. */
-#undef HAVE__BOOL
-
-/* Define to 1 if you have the `_set_invalid_parameter_handler' function. */
-#undef HAVE__SET_INVALID_PARAMETER_HANDLER
-
-/* Define to 1 if you have the `__fpending' function. */
-#undef HAVE___FPENDING
-
-/* Define if the mbrtowc function has the NULL pwc argument bug. */
-#undef MBRTOWC_NULL_ARG1_BUG
-
-/* Define if the mbrtowc function has the NULL string argument bug. */
-#undef MBRTOWC_NULL_ARG2_BUG
-
-/* Define if the mbrtowc function does not return 0 for a NUL character. */
-#undef MBRTOWC_NUL_RETVAL_BUG
-
-/* Define if the mbrtowc function returns a wrong return value. */
-#undef MBRTOWC_RETVAL_BUG
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* the number of pending output bytes on stream 'fp' */
-#undef PENDING_OUTPUT_N_BYTES
-
-/* Define to 1 if strerror(0) does not return a message implying success. */
-#undef REPLACE_STRERROR_0
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to 1 if strerror_r returns char *. */
-#undef STRERROR_R_CHAR_P
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to 1 if on MINIX. */
-#undef _MINIX
-
-/* The _Noreturn keyword of C11. */
-#ifndef _Noreturn
-# if (3 <= __GNUC__ || (__GNUC__ == 2 && 8 <= __GNUC_MINOR__) \
- || 0x5110 <= __SUNPRO_C)
-# define _Noreturn __attribute__ ((__noreturn__))
-# elif defined _MSC_VER && 1200 <= _MSC_VER
-# define _Noreturn __declspec (noreturn)
-# else
-# define _Noreturn
-# endif
-#endif
-
-
-/* Define to 2 if the system does not provide POSIX.1 features except with
- this defined. */
-#undef _POSIX_1_SOURCE
-
-/* Define to 1 if you need to in order for 'stat' and other things to work. */
-#undef _POSIX_SOURCE
-
-/* Define to 500 only on HP-UX. */
-#undef _XOPEN_SOURCE
-
-/* Enable extensions on AIX 3, Interix. */
-#ifndef _ALL_SOURCE
-# undef _ALL_SOURCE
-#endif
-/* Enable general extensions on MacOS X. */
-#ifndef _DARWIN_C_SOURCE
-# undef _DARWIN_C_SOURCE
-#endif
-/* Enable GNU extensions on systems that have them. */
-#ifndef _GNU_SOURCE
-# undef _GNU_SOURCE
-#endif
-/* Enable threading extensions on Solaris. */
-#ifndef _POSIX_PTHREAD_SEMANTICS
-# undef _POSIX_PTHREAD_SEMANTICS
-#endif
-/* Enable extensions on HP NonStop. */
-#ifndef _TANDEM_SOURCE
-# undef _TANDEM_SOURCE
-#endif
-/* Enable general extensions on Solaris. */
-#ifndef __EXTENSIONS__
-# undef __EXTENSIONS__
-#endif
-
-
-/* Define to rpl_ if the getopt replacement functions and variables should be
- used. */
-#undef __GETOPT_PREFIX
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
- calls it, or to nothing if 'inline' is not supported under any name. */
-#ifndef __cplusplus
-#undef inline
-#endif
-
-/* Work around a bug in Apple GCC 4.0.1 build 5465: In C99 mode, it supports
- the ISO C 99 semantics of 'extern inline' (unlike the GNU C semantics of
- earlier versions), but does not display it by setting __GNUC_STDC_INLINE__.
- __APPLE__ && __MACH__ test for MacOS X.
- __APPLE_CC__ tests for the Apple compiler and its version.
- __STDC_VERSION__ tests for the C99 mode. */
-#if defined __APPLE__ && defined __MACH__ && __APPLE_CC__ >= 5465 && !defined __cplusplus && __STDC_VERSION__ >= 199901L && !defined __GNUC_STDC_INLINE__
-# define __GNUC_STDC_INLINE__ 1
-#endif
-
-/* Define to a type if <wchar.h> does not define. */
-#undef mbstate_t
-
-/* Define to `int' if <sys/types.h> does not define. */
-#undef pid_t
-
-/* Define to the equivalent of the C99 'restrict' keyword, or to
- nothing if this is not supported. Do not define if restrict is
- supported directly. */
-#undef restrict
-/* Work around a bug in Sun C++: it does not support _Restrict or
- __restrict__, even though the corresponding Sun C compiler ends up with
- "#define restrict _Restrict" or "#define restrict __restrict__" in the
- previous line. Perhaps some future version of Sun C++ will work with
- restrict; if so, hopefully it defines __RESTRICT like Sun C does. */
-#if defined __SUNPRO_CC && !defined __RESTRICT
-# define _Restrict
-# define __restrict__
-#endif
-
-/* Define as a signed type of the same size as size_t. */
-#undef ssize_t
-
-/* Define as a marker that can be attached to declarations that might not
- be used. This helps to reduce warnings, such as from
- GCC -Wunused-parameter. */
-#if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7)
-# define _GL_UNUSED __attribute__ ((__unused__))
-#else
-# define _GL_UNUSED
-#endif
-/* The name _UNUSED_PARAMETER_ is an earlier spelling, although the name
- is a misnomer outside of parameter lists. */
-#define _UNUSED_PARAMETER_ _GL_UNUSED
-
-/* The __pure__ attribute was added in gcc 2.96. */
-#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96)
-# define _GL_ATTRIBUTE_PURE __attribute__ ((__pure__))
-#else
-# define _GL_ATTRIBUTE_PURE /* empty */
-#endif
-
-/* The __const__ attribute was added in gcc 2.95. */
-#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
-# define _GL_ATTRIBUTE_CONST __attribute__ ((__const__))
-#else
-# define _GL_ATTRIBUTE_CONST /* empty */
-#endif
-
+++ /dev/null
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for GNU Hello 2.8.
-#
-# Report bugs to <bug-hello@gnu.org>.
-#
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- # Preserve -v and -x to the replacement shell.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
- esac
- exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org and bug-hello@gnu.org
-$0: about your system, including any error possibly output
-$0: before this message. Then install a modern shell, or
-$0: manually run the script under such a shell if you do
-$0: have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='GNU Hello'
-PACKAGE_TARNAME='hello'
-PACKAGE_VERSION='2.8'
-PACKAGE_STRING='GNU Hello 2.8'
-PACKAGE_BUGREPORT='bug-hello@gnu.org'
-PACKAGE_URL='http://www.gnu.org/software/hello/'
-
-ac_unique_file="src/hello.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-ac_header_list=
-ac_func_list=
-gl_getopt_required=POSIX
-gl_getopt_required=POSIX
-gt_needs=
-ac_subst_vars='gltests_LTLIBOBJS
-gltests_LIBOBJS
-gl_LTLIBOBJS
-gl_LIBOBJS
-CONFIG_INCLUDE
-am__EXEEXT_FALSE
-am__EXEEXT_TRUE
-LTLIBOBJS
-LIBOBJS
-POSUB
-INTLLIBS
-LTLIBICONV
-LIBICONV
-INTL_MACOSX_LIBS
-XGETTEXT_EXTRA_OPTIONS
-MSGMERGE
-XGETTEXT_015
-XGETTEXT
-GMSGFMT_015
-MSGFMT_015
-GMSGFMT
-MSGFMT
-GETTEXT_MACRO_VERSION
-USE_NLS
-HELP2MAN
-LIBHELLO_LTLIBDEPS
-LIBHELLO_LIBDEPS
-gltests_WITNESS
-REPLACE_TOWLOWER
-REPLACE_ISWCNTRL
-HAVE_WCTYPE_H
-NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H
-NEXT_WCTYPE_H
-HAVE_ISWCNTRL
-REPLACE_ISWBLANK
-HAVE_WCTRANS_T
-HAVE_WCTYPE_T
-HAVE_ISWBLANK
-GNULIB_TOWCTRANS
-GNULIB_WCTRANS
-GNULIB_ISWCTYPE
-GNULIB_WCTYPE
-GNULIB_ISWBLANK
-HAVE_WINT_T
-HAVE_FEATURES_H
-HAVE_WCHAR_H
-NEXT_AS_FIRST_DIRECTIVE_WCHAR_H
-NEXT_WCHAR_H
-HAVE_UNISTD_H
-NEXT_AS_FIRST_DIRECTIVE_UNISTD_H
-NEXT_UNISTD_H
-NEXT_AS_FIRST_DIRECTIVE_STRING_H
-NEXT_STRING_H
-HAVE_WINSOCK2_H
-UNDEFINE_STRTOK_R
-REPLACE_STRTOK_R
-REPLACE_STRSIGNAL
-REPLACE_STRNLEN
-REPLACE_STRNDUP
-REPLACE_STRNCAT
-REPLACE_STRERROR_R
-REPLACE_STRERROR
-REPLACE_STRCHRNUL
-REPLACE_STRCASESTR
-REPLACE_STRSTR
-REPLACE_STRDUP
-REPLACE_STPNCPY
-REPLACE_MEMMEM
-REPLACE_MEMCHR
-HAVE_STRVERSCMP
-HAVE_DECL_STRSIGNAL
-HAVE_DECL_STRERROR_R
-HAVE_DECL_STRTOK_R
-HAVE_STRCASESTR
-HAVE_STRSEP
-HAVE_STRPBRK
-HAVE_DECL_STRNLEN
-HAVE_DECL_STRNDUP
-HAVE_DECL_STRDUP
-HAVE_STRCHRNUL
-HAVE_STPNCPY
-HAVE_STPCPY
-HAVE_RAWMEMCHR
-HAVE_DECL_MEMRCHR
-HAVE_MEMPCPY
-HAVE_DECL_MEMMEM
-HAVE_MEMCHR
-HAVE_FFSLL
-HAVE_FFSL
-HAVE_MBSLEN
-GNULIB_STRVERSCMP
-GNULIB_STRSIGNAL
-GNULIB_STRERROR_R
-GNULIB_STRERROR
-GNULIB_MBSTOK_R
-GNULIB_MBSSEP
-GNULIB_MBSSPN
-GNULIB_MBSPBRK
-GNULIB_MBSCSPN
-GNULIB_MBSCASESTR
-GNULIB_MBSPCASECMP
-GNULIB_MBSNCASECMP
-GNULIB_MBSCASECMP
-GNULIB_MBSSTR
-GNULIB_MBSRCHR
-GNULIB_MBSCHR
-GNULIB_MBSNLEN
-GNULIB_MBSLEN
-GNULIB_STRTOK_R
-GNULIB_STRCASESTR
-GNULIB_STRSTR
-GNULIB_STRSEP
-GNULIB_STRPBRK
-GNULIB_STRNLEN
-GNULIB_STRNDUP
-GNULIB_STRNCAT
-GNULIB_STRDUP
-GNULIB_STRCHRNUL
-GNULIB_STPNCPY
-GNULIB_STPCPY
-GNULIB_RAWMEMCHR
-GNULIB_MEMRCHR
-GNULIB_MEMPCPY
-GNULIB_MEMMEM
-GNULIB_MEMCHR
-GNULIB_FFSLL
-GNULIB_FFSL
-NEXT_AS_FIRST_DIRECTIVE_STDLIB_H
-NEXT_STDLIB_H
-REPLACE_WCTOMB
-REPLACE_UNSETENV
-REPLACE_STRTOD
-REPLACE_SETENV
-REPLACE_REALPATH
-REPLACE_REALLOC
-REPLACE_RANDOM_R
-REPLACE_PUTENV
-REPLACE_PTSNAME_R
-REPLACE_MKSTEMP
-REPLACE_MBTOWC
-REPLACE_MALLOC
-REPLACE_CANONICALIZE_FILE_NAME
-REPLACE_CALLOC
-HAVE_DECL_UNSETENV
-HAVE_UNLOCKPT
-HAVE_SYS_LOADAVG_H
-HAVE_STRUCT_RANDOM_DATA
-HAVE_STRTOULL
-HAVE_STRTOLL
-HAVE_STRTOD
-HAVE_DECL_SETENV
-HAVE_SETENV
-HAVE_RPMATCH
-HAVE_REALPATH
-HAVE_RANDOM_R
-HAVE_RANDOM_H
-HAVE_RANDOM
-HAVE_PTSNAME_R
-HAVE_PTSNAME
-HAVE_POSIX_OPENPT
-HAVE_MKSTEMPS
-HAVE_MKSTEMP
-HAVE_MKOSTEMPS
-HAVE_MKOSTEMP
-HAVE_MKDTEMP
-HAVE_GRANTPT
-HAVE_GETSUBOPT
-HAVE_DECL_GETLOADAVG
-HAVE_CANONICALIZE_FILE_NAME
-HAVE_ATOLL
-HAVE__EXIT
-GNULIB_WCTOMB
-GNULIB_UNSETENV
-GNULIB_UNLOCKPT
-GNULIB_SYSTEM_POSIX
-GNULIB_STRTOULL
-GNULIB_STRTOLL
-GNULIB_STRTOD
-GNULIB_SETENV
-GNULIB_RPMATCH
-GNULIB_REALPATH
-GNULIB_REALLOC_POSIX
-GNULIB_RANDOM_R
-GNULIB_RANDOM
-GNULIB_PUTENV
-GNULIB_PTSNAME_R
-GNULIB_PTSNAME
-GNULIB_POSIX_OPENPT
-GNULIB_MKSTEMPS
-GNULIB_MKSTEMP
-GNULIB_MKOSTEMPS
-GNULIB_MKOSTEMP
-GNULIB_MKDTEMP
-GNULIB_MBTOWC
-GNULIB_MALLOC_POSIX
-GNULIB_GRANTPT
-GNULIB_GETSUBOPT
-GNULIB_GETLOADAVG
-GNULIB_CANONICALIZE_FILE_NAME
-GNULIB_CALLOC_POSIX
-GNULIB_ATOLL
-GNULIB__EXIT
-NEXT_AS_FIRST_DIRECTIVE_STDDEF_H
-NEXT_STDDEF_H
-GL_GENERATE_STDDEF_H_FALSE
-GL_GENERATE_STDDEF_H_TRUE
-STDDEF_H
-HAVE_WCHAR_T
-REPLACE_NULL
-HAVE__BOOL
-GL_GENERATE_STDBOOL_H_FALSE
-GL_GENERATE_STDBOOL_H_TRUE
-STDBOOL_H
-HAVE_MSVC_INVALID_PARAMETER_HANDLER
-LOCALE_FR_UTF8
-LOCALE_ZH_CN
-LOCALE_JA
-REPLACE_WCSWIDTH
-REPLACE_WCWIDTH
-REPLACE_WCSNRTOMBS
-REPLACE_WCSRTOMBS
-REPLACE_WCRTOMB
-REPLACE_MBSNRTOWCS
-REPLACE_MBSRTOWCS
-REPLACE_MBRLEN
-REPLACE_MBRTOWC
-REPLACE_MBSINIT
-REPLACE_WCTOB
-REPLACE_BTOWC
-REPLACE_MBSTATE_T
-HAVE_DECL_WCWIDTH
-HAVE_DECL_WCTOB
-HAVE_WCSWIDTH
-HAVE_WCSTOK
-HAVE_WCSSTR
-HAVE_WCSPBRK
-HAVE_WCSSPN
-HAVE_WCSCSPN
-HAVE_WCSRCHR
-HAVE_WCSCHR
-HAVE_WCSDUP
-HAVE_WCSXFRM
-HAVE_WCSCOLL
-HAVE_WCSNCASECMP
-HAVE_WCSCASECMP
-HAVE_WCSNCMP
-HAVE_WCSCMP
-HAVE_WCSNCAT
-HAVE_WCSCAT
-HAVE_WCPNCPY
-HAVE_WCSNCPY
-HAVE_WCPCPY
-HAVE_WCSCPY
-HAVE_WCSNLEN
-HAVE_WCSLEN
-HAVE_WMEMSET
-HAVE_WMEMMOVE
-HAVE_WMEMCPY
-HAVE_WMEMCMP
-HAVE_WMEMCHR
-HAVE_WCSNRTOMBS
-HAVE_WCSRTOMBS
-HAVE_WCRTOMB
-HAVE_MBSNRTOWCS
-HAVE_MBSRTOWCS
-HAVE_MBRLEN
-HAVE_MBRTOWC
-HAVE_MBSINIT
-HAVE_BTOWC
-GNULIB_WCSWIDTH
-GNULIB_WCSTOK
-GNULIB_WCSSTR
-GNULIB_WCSPBRK
-GNULIB_WCSSPN
-GNULIB_WCSCSPN
-GNULIB_WCSRCHR
-GNULIB_WCSCHR
-GNULIB_WCSDUP
-GNULIB_WCSXFRM
-GNULIB_WCSCOLL
-GNULIB_WCSNCASECMP
-GNULIB_WCSCASECMP
-GNULIB_WCSNCMP
-GNULIB_WCSCMP
-GNULIB_WCSNCAT
-GNULIB_WCSCAT
-GNULIB_WCPNCPY
-GNULIB_WCSNCPY
-GNULIB_WCPCPY
-GNULIB_WCSCPY
-GNULIB_WCSNLEN
-GNULIB_WCSLEN
-GNULIB_WMEMSET
-GNULIB_WMEMMOVE
-GNULIB_WMEMCPY
-GNULIB_WMEMCMP
-GNULIB_WMEMCHR
-GNULIB_WCWIDTH
-GNULIB_WCSNRTOMBS
-GNULIB_WCSRTOMBS
-GNULIB_WCRTOMB
-GNULIB_MBSNRTOWCS
-GNULIB_MBSRTOWCS
-GNULIB_MBRLEN
-GNULIB_MBRTOWC
-GNULIB_MBSINIT
-GNULIB_WCTOB
-GNULIB_BTOWC
-LOCALCHARSET_TESTS_ENVIRONMENT
-GLIBC21
-LTLIBINTL
-LIBINTL
-GNULIB_GL_UNISTD_H_GETOPT
-GETOPT_H
-HAVE_GETOPT_H
-NEXT_AS_FIRST_DIRECTIVE_GETOPT_H
-NEXT_GETOPT_H
-UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS
-UNISTD_H_HAVE_WINSOCK2_H
-REPLACE_WRITE
-REPLACE_USLEEP
-REPLACE_UNLINKAT
-REPLACE_UNLINK
-REPLACE_TTYNAME_R
-REPLACE_SYMLINK
-REPLACE_SLEEP
-REPLACE_RMDIR
-REPLACE_READLINK
-REPLACE_READ
-REPLACE_PWRITE
-REPLACE_PREAD
-REPLACE_LSEEK
-REPLACE_LINKAT
-REPLACE_LINK
-REPLACE_LCHOWN
-REPLACE_ISATTY
-REPLACE_GETPAGESIZE
-REPLACE_GETGROUPS
-REPLACE_GETLOGIN_R
-REPLACE_GETDOMAINNAME
-REPLACE_GETCWD
-REPLACE_FCHOWNAT
-REPLACE_DUP2
-REPLACE_DUP
-REPLACE_CLOSE
-REPLACE_CHOWN
-HAVE_SYS_PARAM_H
-HAVE_OS_H
-HAVE_DECL_TTYNAME_R
-HAVE_DECL_SETHOSTNAME
-HAVE_DECL_GETUSERSHELL
-HAVE_DECL_GETPAGESIZE
-HAVE_DECL_GETLOGIN_R
-HAVE_DECL_GETDOMAINNAME
-HAVE_DECL_FDATASYNC
-HAVE_DECL_FCHDIR
-HAVE_DECL_ENVIRON
-HAVE_USLEEP
-HAVE_UNLINKAT
-HAVE_SYMLINKAT
-HAVE_SYMLINK
-HAVE_SLEEP
-HAVE_SETHOSTNAME
-HAVE_READLINKAT
-HAVE_READLINK
-HAVE_PWRITE
-HAVE_PREAD
-HAVE_PIPE2
-HAVE_PIPE
-HAVE_LINKAT
-HAVE_LINK
-HAVE_LCHOWN
-HAVE_GROUP_MEMBER
-HAVE_GETPAGESIZE
-HAVE_GETLOGIN
-HAVE_GETHOSTNAME
-HAVE_GETGROUPS
-HAVE_GETDTABLESIZE
-HAVE_FTRUNCATE
-HAVE_FSYNC
-HAVE_FDATASYNC
-HAVE_FCHOWNAT
-HAVE_FCHDIR
-HAVE_FACCESSAT
-HAVE_EUIDACCESS
-HAVE_DUP3
-HAVE_DUP2
-HAVE_CHOWN
-GNULIB_WRITE
-GNULIB_USLEEP
-GNULIB_UNLINKAT
-GNULIB_UNLINK
-GNULIB_UNISTD_H_SIGPIPE
-GNULIB_UNISTD_H_NONBLOCKING
-GNULIB_TTYNAME_R
-GNULIB_SYMLINKAT
-GNULIB_SYMLINK
-GNULIB_SLEEP
-GNULIB_SETHOSTNAME
-GNULIB_RMDIR
-GNULIB_READLINKAT
-GNULIB_READLINK
-GNULIB_READ
-GNULIB_PWRITE
-GNULIB_PREAD
-GNULIB_PIPE2
-GNULIB_PIPE
-GNULIB_LSEEK
-GNULIB_LINKAT
-GNULIB_LINK
-GNULIB_LCHOWN
-GNULIB_ISATTY
-GNULIB_GROUP_MEMBER
-GNULIB_GETUSERSHELL
-GNULIB_GETPAGESIZE
-GNULIB_GETLOGIN_R
-GNULIB_GETLOGIN
-GNULIB_GETHOSTNAME
-GNULIB_GETGROUPS
-GNULIB_GETDTABLESIZE
-GNULIB_GETDOMAINNAME
-GNULIB_GETCWD
-GNULIB_FTRUNCATE
-GNULIB_FSYNC
-GNULIB_FDATASYNC
-GNULIB_FCHOWNAT
-GNULIB_FCHDIR
-GNULIB_FACCESSAT
-GNULIB_EUIDACCESS
-GNULIB_ENVIRON
-GNULIB_DUP3
-GNULIB_DUP2
-GNULIB_DUP
-GNULIB_CLOSE
-GNULIB_CHOWN
-GNULIB_CHDIR
-EOVERFLOW_VALUE
-EOVERFLOW_HIDDEN
-ENOLINK_VALUE
-ENOLINK_HIDDEN
-EMULTIHOP_VALUE
-EMULTIHOP_HIDDEN
-GL_GENERATE_ERRNO_H_FALSE
-GL_GENERATE_ERRNO_H_TRUE
-ERRNO_H
-NEXT_AS_FIRST_DIRECTIVE_ERRNO_H
-NEXT_ERRNO_H
-PRAGMA_COLUMNS
-PRAGMA_SYSTEM_HEADER
-INCLUDE_NEXT_AS_FIRST_DIRECTIVE
-INCLUDE_NEXT
-pkglibexecdir
-lispdir
-GL_COND_LIBTOOL_FALSE
-GL_COND_LIBTOOL_TRUE
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-RANLIB
-ARFLAGS
-AR
-EGREP
-GREP
-CPP
-am__fastdepCC_FALSE
-am__fastdepCC_TRUE
-CCDEPMODE
-am__nodep
-AMDEPBACKSLASH
-AMDEP_FALSE
-AMDEP_TRUE
-am__quote
-am__include
-DEPDIR
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-am__untar
-am__tar
-AMTAR
-am__leading_dot
-SET_MAKE
-AWK
-mkdir_p
-MKDIR_P
-INSTALL_STRIP_PROGRAM
-STRIP
-install_sh
-MAKEINFO
-AUTOHEADER
-AUTOMAKE
-AUTOCONF
-ACLOCAL
-VERSION
-PACKAGE
-CYGPATH_W
-am__isrc
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_dependency_tracking
-enable_nls
-with_gnu_ld
-enable_rpath
-with_libiconv_prefix
-with_libintl_prefix
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
- esac
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used" >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures GNU Hello 2.8 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/hello]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of GNU Hello 2.8:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
- --disable-nls do not use Native Language Support
- --disable-rpath do not hardcode runtime library paths
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gnu-ld assume the C compiler uses GNU ld default=no
- --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
- --without-libiconv-prefix don't search for libiconv in includedir and libdir
- --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
- --without-libintl-prefix don't search for libintl in includedir and libdir
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to <bug-hello@gnu.org>.
-GNU Hello home page: <http://www.gnu.org/software/hello/>.
-General help using GNU software: <http://www.gnu.org/gethelp/>.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-GNU Hello configure 2.8
-generated by GNU Autoconf 2.68
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_c_check_header_mongrel ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if eval \${$3+:} false; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_header_compiler=yes
-else
- ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <$2>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- ac_header_preproc=yes
-else
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
- yes:no: )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ;;
- no:yes:* )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-( $as_echo "## -------------------------------- ##
-## Report this to bug-hello@gnu.org ##
-## -------------------------------- ##"
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_mongrel
-
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then :
- ac_retval=0
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=$ac_status
-fi
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_run
-
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_compile
-
-# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
-# --------------------------------------------
-# Tries to find the compile-time value of EXPR in a program that includes
-# INCLUDES, setting VAR accordingly. Returns whether the value could be
-# computed
-ac_fn_c_compute_int ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) >= 0)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_lo=0 ac_mid=0
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_hi=$ac_mid; break
-else
- as_fn_arith $ac_mid + 1 && ac_lo=$as_val
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) < 0)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_hi=-1 ac_mid=-1
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) >= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_lo=$ac_mid; break
-else
- as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- ac_lo= ac_hi=
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_hi=$ac_mid
-else
- as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in #((
-?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
-'') ac_retval=1 ;;
-esac
- else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-static long int longval () { return $2; }
-static unsigned long int ulongval () { return $2; }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- return 1;
- if (($2) < 0)
- {
- long int i = longval ();
- if (i != ($2))
- return 1;
- fprintf (f, "%ld", i);
- }
- else
- {
- unsigned long int i = ulongval ();
- if (i != ($2))
- return 1;
- fprintf (f, "%lu", i);
- }
- /* Do not output a trailing newline, as this causes \r\n confusion
- on some platforms. */
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- echo >>conftest.val; read $3 <conftest.val; ac_retval=0
-else
- ac_retval=1
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-rm -f conftest.val
-
- fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_compute_int
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
-# ---------------------------------------------
-# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
-# accordingly.
-ac_fn_c_check_decl ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- as_decl_name=`echo $2|sed 's/ *(.*//'`
- as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
-$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-#ifndef $as_decl_name
-#ifdef __cplusplus
- (void) $as_decl_use;
-#else
- (void) $as_decl_name;
-#endif
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_decl
-
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $2 (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_func
-
-# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
-# -------------------------------------------
-# Tests whether TYPE exists after having included INCLUDES, setting cache
-# variable VAR accordingly.
-ac_fn_c_check_type ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- eval "$3=no"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-if (sizeof ($2))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-if (sizeof (($2)))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- eval "$3=yes"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_type
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by GNU Hello $as_me 2.8, which was
-generated by GNU Autoconf 2.68. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special files
- # actually), so we avoid doing that. DJGPP emulates it as a regular file.
- if test /dev/null != "$cache_file" && test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-as_fn_append ac_header_list " stdio_ext.h"
-as_fn_append ac_func_list " __fpending"
-gl_getopt_required=GNU
-as_fn_append ac_header_list " getopt.h"
-as_fn_append ac_header_list " unistd.h"
-as_fn_append ac_func_list " symlink"
-as_fn_append ac_func_list " mbsinit"
-as_fn_append ac_func_list " mbrtowc"
-as_fn_append ac_func_list " _set_invalid_parameter_handler"
-as_fn_append ac_header_list " sys/socket.h"
-as_fn_append ac_header_list " wchar.h"
-as_fn_append ac_header_list " features.h"
-as_fn_append ac_func_list " iswcntrl"
-as_fn_append ac_header_list " wctype.h"
-gt_needs="$gt_needs "
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-ac_aux_dir=
-for ac_dir in build-aux "$srcdir"/build-aux; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-am__api_version='1.11'
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
- ./ | .// | /[cC]/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- fi
- done
- done
- ;;
-esac
-
- done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[\\\"\#\$\&\'\`$am_lf]*)
- as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
-esac
-case $srcdir in
- *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
-alias in your environment" "$LINENO" 5
- fi
-
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- as_fn_error $? "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
- if ${ac_cv_path_mkdir+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
- done
-IFS=$as_save_IFS
-
-fi
-
- test -d ./--version && rmdir ./--version
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- MKDIR_P="$ac_install_sh -d"
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='hello'
- VERSION='2.8'
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AMTAR='$${TAR-tar}'
-
-am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
-
-
-
-
-
-
-# Minimum Autoconf version required.
-
-
-# Where to generate output; srcdir location.
-ac_config_headers="$ac_config_headers config.h:config.in"
-
-
-# We need a C compiler.
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-if test -z "$ac_file"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
- { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if { ac_try='./conftest$ac_cv_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-
-# Since we use gnulib: gl_EARLY must be called as soon as possible after
-# the C compiler is checked. The others could be later, but we just
-# keep everything together.
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if ${ac_cv_prog_CPP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Minix Amsterdam compiler" >&5
-$as_echo_n "checking for Minix Amsterdam compiler... " >&6; }
-if ${gl_cv_c_amsterdam_compiler+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#ifdef __ACK__
-Amsterdam
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "Amsterdam" >/dev/null 2>&1; then :
- gl_cv_c_amsterdam_compiler=yes
-else
- gl_cv_c_amsterdam_compiler=no
-fi
-rm -f conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_c_amsterdam_compiler" >&5
-$as_echo "$gl_cv_c_amsterdam_compiler" >&6; }
- if test -z "$AR"; then
- if test $gl_cv_c_amsterdam_compiler = yes; then
- AR='cc -c.a'
- if test -z "$ARFLAGS"; then
- ARFLAGS='-o'
- fi
- else
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
- ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_AR" = x; then
- AR="ar"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-else
- AR="$ac_cv_prog_AR"
-fi
-
- if test -z "$ARFLAGS"; then
- ARFLAGS='cru'
- fi
- fi
- else
- if test -z "$ARFLAGS"; then
- ARFLAGS='cru'
- fi
- fi
-
-
- if test -z "$RANLIB"; then
- if test $gl_cv_c_amsterdam_compiler = yes; then
- RANLIB=':'
- else
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_RANLIB+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
- fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
- fi
- fi
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
-else
- ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
- ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
-if test "x$ac_cv_header_minix_config_h" = xyes; then :
- MINIX=yes
-else
- MINIX=
-fi
-
-
- if test "$MINIX" = yes; then
-
-$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
-
-
-$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
-
-
-$as_echo "#define _MINIX 1" >>confdefs.h
-
- fi
-
- case "$host_os" in
- hpux*)
-
-$as_echo "#define _XOPEN_SOURCE 500" >>confdefs.h
-
- ;;
- esac
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
-$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
-if ${ac_cv_safe_to_define___extensions__+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-# define __EXTENSIONS__ 1
- $ac_includes_default
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_safe_to_define___extensions__=yes
-else
- ac_cv_safe_to_define___extensions__=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
-$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
- test $ac_cv_safe_to_define___extensions__ = yes &&
- $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
-
- $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
-
- $as_echo "#define _DARWIN_C_SOURCE 1" >>confdefs.h
-
- $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
-
- $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
-
- $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
-
-
-
-
-
-
-
-
-
-
- # Code from module announce-gen:
- # Code from module c-ctype:
- # Code from module c-strcase:
- # Code from module c-strcaseeq:
- # Code from module close-stream:
- # Code from module closeout:
- # Code from module configmake:
- # Code from module do-release-commit-and-tag:
- # Code from module errno:
- # Code from module error:
- # Code from module exitfail:
- # Code from module extensions:
-
- # Code from module fdl:
- # Code from module fpending:
- # Code from module gendocs:
- # Code from module getopt-gnu:
- # Code from module getopt-posix:
- # Code from module gettext:
- # Code from module gettext-h:
- # Code from module gnumakefile:
- # Code from module gnupload:
- # Code from module havelib:
- # Code from module include_next:
- # Code from module inline:
- # Code from module intprops:
- # Code from module localcharset:
- # Code from module maintainer-makefile:
- # Code from module mbrtowc:
- # Code from module mbsinit:
- # Code from module msvc-inval:
- # Code from module msvc-nothrow:
- # Code from module nocrash:
- # Code from module progname:
- # Code from module quotearg:
- # Code from module quotearg-simple:
- # Code from module readme-release:
- # Code from module snippet/_Noreturn:
- # Code from module snippet/arg-nonnull:
- # Code from module snippet/c++defs:
- # Code from module snippet/warn-on-use:
- # Code from module ssize_t:
- # Code from module stdbool:
- # Code from module stddef:
- # Code from module stdlib:
- # Code from module streq:
- # Code from module strerror:
- # Code from module strerror-override:
- # Code from module string:
- # Code from module unistd:
- # Code from module useless-if-before-free:
- # Code from module vc-list-files:
- # Code from module verify:
- # Code from module wchar:
- # Code from module wctype-h:
- # Code from module xalloc:
- # Code from module xalloc-die:
- # Code from module xalloc-oversized:
-
-
-
-
-
-
- LIBC_FATAL_STDERR_=1
- export LIBC_FATAL_STDERR_
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the preprocessor supports include_next" >&5
-$as_echo_n "checking whether the preprocessor supports include_next... " >&6; }
-if ${gl_cv_have_include_next+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- rm -rf conftestd1a conftestd1b conftestd2
- mkdir conftestd1a conftestd1b conftestd2
- cat <<EOF > conftestd1a/conftest.h
-#define DEFINED_IN_CONFTESTD1
-#include_next <conftest.h>
-#ifdef DEFINED_IN_CONFTESTD2
-int foo;
-#else
-#error "include_next doesn't work"
-#endif
-EOF
- cat <<EOF > conftestd1b/conftest.h
-#define DEFINED_IN_CONFTESTD1
-#include <stdio.h>
-#include_next <conftest.h>
-#ifdef DEFINED_IN_CONFTESTD2
-int foo;
-#else
-#error "include_next doesn't work"
-#endif
-EOF
- cat <<EOF > conftestd2/conftest.h
-#ifndef DEFINED_IN_CONFTESTD1
-#error "include_next test doesn't work"
-#endif
-#define DEFINED_IN_CONFTESTD2
-EOF
- gl_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$gl_save_CPPFLAGS -Iconftestd1b -Iconftestd2"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <conftest.h>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gl_cv_have_include_next=yes
-else
- CPPFLAGS="$gl_save_CPPFLAGS -Iconftestd1a -Iconftestd2"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <conftest.h>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gl_cv_have_include_next=buggy
-else
- gl_cv_have_include_next=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CPPFLAGS="$gl_save_CPPFLAGS"
- rm -rf conftestd1a conftestd1b conftestd2
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_have_include_next" >&5
-$as_echo "$gl_cv_have_include_next" >&6; }
- PRAGMA_SYSTEM_HEADER=
- if test $gl_cv_have_include_next = yes; then
- INCLUDE_NEXT=include_next
- INCLUDE_NEXT_AS_FIRST_DIRECTIVE=include_next
- if test -n "$GCC"; then
- PRAGMA_SYSTEM_HEADER='#pragma GCC system_header'
- fi
- else
- if test $gl_cv_have_include_next = buggy; then
- INCLUDE_NEXT=include
- INCLUDE_NEXT_AS_FIRST_DIRECTIVE=include_next
- else
- INCLUDE_NEXT=include
- INCLUDE_NEXT_AS_FIRST_DIRECTIVE=include
- fi
- fi
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether system header files limit the line length" >&5
-$as_echo_n "checking whether system header files limit the line length... " >&6; }
-if ${gl_cv_pragma_columns+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#ifdef __TANDEM
-choke me
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "choke me" >/dev/null 2>&1; then :
- gl_cv_pragma_columns=yes
-else
- gl_cv_pragma_columns=no
-fi
-rm -f conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_pragma_columns" >&5
-$as_echo "$gl_cv_pragma_columns" >&6; }
- if test $gl_cv_pragma_columns = yes; then
- PRAGMA_COLUMNS="#pragma COLUMNS 10000"
- else
- PRAGMA_COLUMNS=
- fi
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for complete errno.h" >&5
-$as_echo_n "checking for complete errno.h... " >&6; }
-if ${gl_cv_header_errno_h_complete+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <errno.h>
-#if !defined ENOMSG
-booboo
-#endif
-#if !defined EIDRM
-booboo
-#endif
-#if !defined ENOLINK
-booboo
-#endif
-#if !defined EPROTO
-booboo
-#endif
-#if !defined EMULTIHOP
-booboo
-#endif
-#if !defined EBADMSG
-booboo
-#endif
-#if !defined EOVERFLOW
-booboo
-#endif
-#if !defined ENOTSUP
-booboo
-#endif
-#if !defined ENETRESET
-booboo
-#endif
-#if !defined ECONNABORTED
-booboo
-#endif
-#if !defined ESTALE
-booboo
-#endif
-#if !defined EDQUOT
-booboo
-#endif
-#if !defined ECANCELED
-booboo
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "booboo" >/dev/null 2>&1; then :
- gl_cv_header_errno_h_complete=no
-else
- gl_cv_header_errno_h_complete=yes
-fi
-rm -f conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_header_errno_h_complete" >&5
-$as_echo "$gl_cv_header_errno_h_complete" >&6; }
- if test $gl_cv_header_errno_h_complete = yes; then
- ERRNO_H=''
- else
-
-
-
-
-
-
-
-
- if test $gl_cv_have_include_next = yes; then
- gl_cv_next_errno_h='<'errno.h'>'
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking absolute name of <errno.h>" >&5
-$as_echo_n "checking absolute name of <errno.h>... " >&6; }
-if ${gl_cv_next_errno_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <errno.h>
-
-_ACEOF
- case "$host_os" in
- aix*) gl_absname_cpp="$ac_cpp -C" ;;
- *) gl_absname_cpp="$ac_cpp" ;;
- esac
-
- case "$host_os" in
- mingw*)
- gl_dirsep_regex='[/\\]'
- ;;
- *)
- gl_dirsep_regex='\/'
- ;;
- esac
- gl_make_literal_regex_sed='s,[]$^\\.*/[],\\&,g'
-
- gl_header_literal_regex=`echo 'errno.h' \
- | sed -e "$gl_make_literal_regex_sed"`
- gl_absolute_header_sed="/${gl_dirsep_regex}${gl_header_literal_regex}/"'{
- s/.*"\(.*'"${gl_dirsep_regex}${gl_header_literal_regex}"'\)".*/\1/
- s|^/[^/]|//&|
- p
- q
- }'
- gl_cv_next_errno_h='"'`(eval "$gl_absname_cpp conftest.$ac_ext") 2>&5 |
- sed -n "$gl_absolute_header_sed"`'"'
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_next_errno_h" >&5
-$as_echo "$gl_cv_next_errno_h" >&6; }
- fi
- NEXT_ERRNO_H=$gl_cv_next_errno_h
-
- if test $gl_cv_have_include_next = yes || test $gl_cv_have_include_next = buggy; then
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next'
- gl_next_as_first_directive='<'errno.h'>'
- else
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include'
- gl_next_as_first_directive=$gl_cv_next_errno_h
- fi
- NEXT_AS_FIRST_DIRECTIVE_ERRNO_H=$gl_next_as_first_directive
-
-
-
-
- ERRNO_H='errno.h'
- fi
-
- if test -n "$ERRNO_H"; then
- GL_GENERATE_ERRNO_H_TRUE=
- GL_GENERATE_ERRNO_H_FALSE='#'
-else
- GL_GENERATE_ERRNO_H_TRUE='#'
- GL_GENERATE_ERRNO_H_FALSE=
-fi
-
-
- if test -n "$ERRNO_H"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for EMULTIHOP value" >&5
-$as_echo_n "checking for EMULTIHOP value... " >&6; }
-if ${gl_cv_header_errno_h_EMULTIHOP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <errno.h>
-#ifdef EMULTIHOP
-yes
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "yes" >/dev/null 2>&1; then :
- gl_cv_header_errno_h_EMULTIHOP=yes
-else
- gl_cv_header_errno_h_EMULTIHOP=no
-fi
-rm -f conftest*
-
- if test $gl_cv_header_errno_h_EMULTIHOP = no; then
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#define _XOPEN_SOURCE_EXTENDED 1
-#include <errno.h>
-#ifdef EMULTIHOP
-yes
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "yes" >/dev/null 2>&1; then :
- gl_cv_header_errno_h_EMULTIHOP=hidden
-fi
-rm -f conftest*
-
- if test $gl_cv_header_errno_h_EMULTIHOP = hidden; then
- if ac_fn_c_compute_int "$LINENO" "EMULTIHOP" "gl_cv_header_errno_h_EMULTIHOP" "
-#define _XOPEN_SOURCE_EXTENDED 1
-#include <errno.h>
-/* The following two lines are a workaround against an autoconf-2.52 bug. */
-#include <stdio.h>
-#include <stdlib.h>
-"; then :
-
-fi
-
- fi
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_header_errno_h_EMULTIHOP" >&5
-$as_echo "$gl_cv_header_errno_h_EMULTIHOP" >&6; }
- case $gl_cv_header_errno_h_EMULTIHOP in
- yes | no)
- EMULTIHOP_HIDDEN=0; EMULTIHOP_VALUE=
- ;;
- *)
- EMULTIHOP_HIDDEN=1; EMULTIHOP_VALUE="$gl_cv_header_errno_h_EMULTIHOP"
- ;;
- esac
-
-
- fi
-
-
- if test -n "$ERRNO_H"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ENOLINK value" >&5
-$as_echo_n "checking for ENOLINK value... " >&6; }
-if ${gl_cv_header_errno_h_ENOLINK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <errno.h>
-#ifdef ENOLINK
-yes
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "yes" >/dev/null 2>&1; then :
- gl_cv_header_errno_h_ENOLINK=yes
-else
- gl_cv_header_errno_h_ENOLINK=no
-fi
-rm -f conftest*
-
- if test $gl_cv_header_errno_h_ENOLINK = no; then
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#define _XOPEN_SOURCE_EXTENDED 1
-#include <errno.h>
-#ifdef ENOLINK
-yes
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "yes" >/dev/null 2>&1; then :
- gl_cv_header_errno_h_ENOLINK=hidden
-fi
-rm -f conftest*
-
- if test $gl_cv_header_errno_h_ENOLINK = hidden; then
- if ac_fn_c_compute_int "$LINENO" "ENOLINK" "gl_cv_header_errno_h_ENOLINK" "
-#define _XOPEN_SOURCE_EXTENDED 1
-#include <errno.h>
-/* The following two lines are a workaround against an autoconf-2.52 bug. */
-#include <stdio.h>
-#include <stdlib.h>
-"; then :
-
-fi
-
- fi
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_header_errno_h_ENOLINK" >&5
-$as_echo "$gl_cv_header_errno_h_ENOLINK" >&6; }
- case $gl_cv_header_errno_h_ENOLINK in
- yes | no)
- ENOLINK_HIDDEN=0; ENOLINK_VALUE=
- ;;
- *)
- ENOLINK_HIDDEN=1; ENOLINK_VALUE="$gl_cv_header_errno_h_ENOLINK"
- ;;
- esac
-
-
- fi
-
-
- if test -n "$ERRNO_H"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for EOVERFLOW value" >&5
-$as_echo_n "checking for EOVERFLOW value... " >&6; }
-if ${gl_cv_header_errno_h_EOVERFLOW+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <errno.h>
-#ifdef EOVERFLOW
-yes
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "yes" >/dev/null 2>&1; then :
- gl_cv_header_errno_h_EOVERFLOW=yes
-else
- gl_cv_header_errno_h_EOVERFLOW=no
-fi
-rm -f conftest*
-
- if test $gl_cv_header_errno_h_EOVERFLOW = no; then
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#define _XOPEN_SOURCE_EXTENDED 1
-#include <errno.h>
-#ifdef EOVERFLOW
-yes
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "yes" >/dev/null 2>&1; then :
- gl_cv_header_errno_h_EOVERFLOW=hidden
-fi
-rm -f conftest*
-
- if test $gl_cv_header_errno_h_EOVERFLOW = hidden; then
- if ac_fn_c_compute_int "$LINENO" "EOVERFLOW" "gl_cv_header_errno_h_EOVERFLOW" "
-#define _XOPEN_SOURCE_EXTENDED 1
-#include <errno.h>
-/* The following two lines are a workaround against an autoconf-2.52 bug. */
-#include <stdio.h>
-#include <stdlib.h>
-"; then :
-
-fi
-
- fi
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_header_errno_h_EOVERFLOW" >&5
-$as_echo "$gl_cv_header_errno_h_EOVERFLOW" >&6; }
- case $gl_cv_header_errno_h_EOVERFLOW in
- yes | no)
- EOVERFLOW_HIDDEN=0; EOVERFLOW_VALUE=
- ;;
- *)
- EOVERFLOW_HIDDEN=1; EOVERFLOW_VALUE="$gl_cv_header_errno_h_EOVERFLOW"
- ;;
- esac
-
-
- fi
-
-
-ac_fn_c_check_decl "$LINENO" "strerror_r" "ac_cv_have_decl_strerror_r" "$ac_includes_default"
-if test "x$ac_cv_have_decl_strerror_r" = xyes; then :
- ac_have_decl=1
-else
- ac_have_decl=0
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_STRERROR_R $ac_have_decl
-_ACEOF
-
-for ac_func in strerror_r
-do :
- ac_fn_c_check_func "$LINENO" "strerror_r" "ac_cv_func_strerror_r"
-if test "x$ac_cv_func_strerror_r" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_STRERROR_R 1
-_ACEOF
-
-fi
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether strerror_r returns char *" >&5
-$as_echo_n "checking whether strerror_r returns char *... " >&6; }
-if ${ac_cv_func_strerror_r_char_p+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- ac_cv_func_strerror_r_char_p=no
- if test $ac_cv_have_decl_strerror_r = yes; then
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$ac_includes_default
-int
-main ()
-{
-
- char buf[100];
- char x = *strerror_r (0, buf, sizeof buf);
- char *p = strerror_r (0, buf, sizeof buf);
- return !p || x;
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_func_strerror_r_char_p=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- else
- # strerror_r is not declared. Choose between
- # systems that have relatively inaccessible declarations for the
- # function. BeOS and DEC UNIX 4.0 fall in this category, but the
- # former has a strerror_r that returns char*, while the latter
- # has a strerror_r that returns `int'.
- # This test should segfault on the DEC system.
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$ac_includes_default
- extern char *strerror_r ();
-int
-main ()
-{
-char buf[100];
- char x = *strerror_r (0, buf, sizeof buf);
- return ! isalpha (x);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- ac_cv_func_strerror_r_char_p=yes
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strerror_r_char_p" >&5
-$as_echo "$ac_cv_func_strerror_r_char_p" >&6; }
-if test $ac_cv_func_strerror_r_char_p = yes; then
-
-$as_echo "#define STRERROR_R_CHAR_P 1" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
-$as_echo_n "checking for inline... " >&6; }
-if ${ac_cv_c_inline+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifndef __cplusplus
-typedef int foo_t;
-static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
-
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_c_inline=$ac_kw
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_inline" != no && break
-done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
-$as_echo "$ac_cv_c_inline" >&6; }
-
-case $ac_cv_c_inline in
- inline | yes) ;;
- *)
- case $ac_cv_c_inline in
- no) ac_val=;;
- *) ac_val=$ac_cv_c_inline;;
- esac
- cat >>confdefs.h <<_ACEOF
-#ifndef __cplusplus
-#define inline $ac_val
-#endif
-_ACEOF
- ;;
-esac
-
-
- XGETTEXT_EXTRA_OPTIONS=
-
-
-
-
- for ac_header in $ac_header_list
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-
- for ac_func in $ac_func_list
-do :
- as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-
-
-
- GNULIB_CHDIR=0;
- GNULIB_CHOWN=0;
- GNULIB_CLOSE=0;
- GNULIB_DUP=0;
- GNULIB_DUP2=0;
- GNULIB_DUP3=0;
- GNULIB_ENVIRON=0;
- GNULIB_EUIDACCESS=0;
- GNULIB_FACCESSAT=0;
- GNULIB_FCHDIR=0;
- GNULIB_FCHOWNAT=0;
- GNULIB_FDATASYNC=0;
- GNULIB_FSYNC=0;
- GNULIB_FTRUNCATE=0;
- GNULIB_GETCWD=0;
- GNULIB_GETDOMAINNAME=0;
- GNULIB_GETDTABLESIZE=0;
- GNULIB_GETGROUPS=0;
- GNULIB_GETHOSTNAME=0;
- GNULIB_GETLOGIN=0;
- GNULIB_GETLOGIN_R=0;
- GNULIB_GETPAGESIZE=0;
- GNULIB_GETUSERSHELL=0;
- GNULIB_GROUP_MEMBER=0;
- GNULIB_ISATTY=0;
- GNULIB_LCHOWN=0;
- GNULIB_LINK=0;
- GNULIB_LINKAT=0;
- GNULIB_LSEEK=0;
- GNULIB_PIPE=0;
- GNULIB_PIPE2=0;
- GNULIB_PREAD=0;
- GNULIB_PWRITE=0;
- GNULIB_READ=0;
- GNULIB_READLINK=0;
- GNULIB_READLINKAT=0;
- GNULIB_RMDIR=0;
- GNULIB_SETHOSTNAME=0;
- GNULIB_SLEEP=0;
- GNULIB_SYMLINK=0;
- GNULIB_SYMLINKAT=0;
- GNULIB_TTYNAME_R=0;
- GNULIB_UNISTD_H_NONBLOCKING=0;
- GNULIB_UNISTD_H_SIGPIPE=0;
- GNULIB_UNLINK=0;
- GNULIB_UNLINKAT=0;
- GNULIB_USLEEP=0;
- GNULIB_WRITE=0;
- HAVE_CHOWN=1;
- HAVE_DUP2=1;
- HAVE_DUP3=1;
- HAVE_EUIDACCESS=1;
- HAVE_FACCESSAT=1;
- HAVE_FCHDIR=1;
- HAVE_FCHOWNAT=1;
- HAVE_FDATASYNC=1;
- HAVE_FSYNC=1;
- HAVE_FTRUNCATE=1;
- HAVE_GETDTABLESIZE=1;
- HAVE_GETGROUPS=1;
- HAVE_GETHOSTNAME=1;
- HAVE_GETLOGIN=1;
- HAVE_GETPAGESIZE=1;
- HAVE_GROUP_MEMBER=1;
- HAVE_LCHOWN=1;
- HAVE_LINK=1;
- HAVE_LINKAT=1;
- HAVE_PIPE=1;
- HAVE_PIPE2=1;
- HAVE_PREAD=1;
- HAVE_PWRITE=1;
- HAVE_READLINK=1;
- HAVE_READLINKAT=1;
- HAVE_SETHOSTNAME=1;
- HAVE_SLEEP=1;
- HAVE_SYMLINK=1;
- HAVE_SYMLINKAT=1;
- HAVE_UNLINKAT=1;
- HAVE_USLEEP=1;
- HAVE_DECL_ENVIRON=1;
- HAVE_DECL_FCHDIR=1;
- HAVE_DECL_FDATASYNC=1;
- HAVE_DECL_GETDOMAINNAME=1;
- HAVE_DECL_GETLOGIN_R=1;
- HAVE_DECL_GETPAGESIZE=1;
- HAVE_DECL_GETUSERSHELL=1;
- HAVE_DECL_SETHOSTNAME=1;
- HAVE_DECL_TTYNAME_R=1;
- HAVE_OS_H=0;
- HAVE_SYS_PARAM_H=0;
- REPLACE_CHOWN=0;
- REPLACE_CLOSE=0;
- REPLACE_DUP=0;
- REPLACE_DUP2=0;
- REPLACE_FCHOWNAT=0;
- REPLACE_GETCWD=0;
- REPLACE_GETDOMAINNAME=0;
- REPLACE_GETLOGIN_R=0;
- REPLACE_GETGROUPS=0;
- REPLACE_GETPAGESIZE=0;
- REPLACE_ISATTY=0;
- REPLACE_LCHOWN=0;
- REPLACE_LINK=0;
- REPLACE_LINKAT=0;
- REPLACE_LSEEK=0;
- REPLACE_PREAD=0;
- REPLACE_PWRITE=0;
- REPLACE_READ=0;
- REPLACE_READLINK=0;
- REPLACE_RMDIR=0;
- REPLACE_SLEEP=0;
- REPLACE_SYMLINK=0;
- REPLACE_TTYNAME_R=0;
- REPLACE_UNLINK=0;
- REPLACE_UNLINKAT=0;
- REPLACE_USLEEP=0;
- REPLACE_WRITE=0;
- UNISTD_H_HAVE_WINSOCK2_H=0;
- UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS=0;
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- if test $gl_cv_have_include_next = yes; then
- gl_cv_next_getopt_h='<'getopt.h'>'
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking absolute name of <getopt.h>" >&5
-$as_echo_n "checking absolute name of <getopt.h>... " >&6; }
-if ${gl_cv_next_getopt_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- if test $ac_cv_header_getopt_h = yes; then
-
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <getopt.h>
-
-_ACEOF
- case "$host_os" in
- aix*) gl_absname_cpp="$ac_cpp -C" ;;
- *) gl_absname_cpp="$ac_cpp" ;;
- esac
-
- case "$host_os" in
- mingw*)
- gl_dirsep_regex='[/\\]'
- ;;
- *)
- gl_dirsep_regex='\/'
- ;;
- esac
- gl_make_literal_regex_sed='s,[]$^\\.*/[],\\&,g'
-
- gl_header_literal_regex=`echo 'getopt.h' \
- | sed -e "$gl_make_literal_regex_sed"`
- gl_absolute_header_sed="/${gl_dirsep_regex}${gl_header_literal_regex}/"'{
- s/.*"\(.*'"${gl_dirsep_regex}${gl_header_literal_regex}"'\)".*/\1/
- s|^/[^/]|//&|
- p
- q
- }'
- gl_cv_next_getopt_h='"'`(eval "$gl_absname_cpp conftest.$ac_ext") 2>&5 |
- sed -n "$gl_absolute_header_sed"`'"'
- else
- gl_cv_next_getopt_h='<'getopt.h'>'
- fi
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_next_getopt_h" >&5
-$as_echo "$gl_cv_next_getopt_h" >&6; }
- fi
- NEXT_GETOPT_H=$gl_cv_next_getopt_h
-
- if test $gl_cv_have_include_next = yes || test $gl_cv_have_include_next = buggy; then
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next'
- gl_next_as_first_directive='<'getopt.h'>'
- else
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include'
- gl_next_as_first_directive=$gl_cv_next_getopt_h
- fi
- NEXT_AS_FIRST_DIRECTIVE_GETOPT_H=$gl_next_as_first_directive
-
-
-
-
- if test $ac_cv_header_getopt_h = yes; then
- HAVE_GETOPT_H=1
- else
- HAVE_GETOPT_H=0
- fi
-
-
- gl_replace_getopt=
-
- if test -z "$gl_replace_getopt" && test $gl_getopt_required = GNU; then
- for ac_header in getopt.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "getopt.h" "ac_cv_header_getopt_h" "$ac_includes_default"
-if test "x$ac_cv_header_getopt_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_GETOPT_H 1
-_ACEOF
-
-else
- gl_replace_getopt=yes
-fi
-
-done
-
- fi
-
- if test -z "$gl_replace_getopt" && test $gl_getopt_required = GNU; then
- for ac_func in getopt_long_only
-do :
- ac_fn_c_check_func "$LINENO" "getopt_long_only" "ac_cv_func_getopt_long_only"
-if test "x$ac_cv_func_getopt_long_only" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_GETOPT_LONG_ONLY 1
-_ACEOF
-
-else
- gl_replace_getopt=yes
-fi
-done
-
- fi
-
- if test -z "$gl_replace_getopt"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getopt is POSIX compatible" >&5
-$as_echo_n "checking whether getopt is POSIX compatible... " >&6; }
-if ${gl_cv_func_getopt_posix+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <unistd.h>
-int
-main ()
-{
-int *p = &optreset; return optreset;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gl_optind_min=1
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <getopt.h>
-int
-main ()
-{
-return !getopt_clip;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gl_optind_min=1
-else
- gl_optind_min=0
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
- gl_save_CPPFLAGS=$CPPFLAGS
- CPPFLAGS="$CPPFLAGS -DOPTIND_MIN=$gl_optind_min"
- if test "$cross_compiling" = yes; then :
- case "$host_os" in
- mingw*) gl_cv_func_getopt_posix="guessing no";;
- darwin* | aix*) gl_cv_func_getopt_posix="guessing no";;
- *) gl_cv_func_getopt_posix="guessing yes";;
- esac
-
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-
-int
-main ()
-{
- {
- static char program[] = "program";
- static char a[] = "-a";
- static char foo[] = "foo";
- static char bar[] = "bar";
- char *argv[] = { program, a, foo, bar, NULL };
- int c;
-
- optind = OPTIND_MIN;
- opterr = 0;
-
- c = getopt (4, argv, "ab");
- if (!(c == 'a'))
- return 1;
- c = getopt (4, argv, "ab");
- if (!(c == -1))
- return 2;
- if (!(optind == 2))
- return 3;
- }
- /* Some internal state exists at this point. */
- {
- static char program[] = "program";
- static char donald[] = "donald";
- static char p[] = "-p";
- static char billy[] = "billy";
- static char duck[] = "duck";
- static char a[] = "-a";
- static char bar[] = "bar";
- char *argv[] = { program, donald, p, billy, duck, a, bar, NULL };
- int c;
-
- optind = OPTIND_MIN;
- opterr = 0;
-
- c = getopt (7, argv, "+abp:q:");
- if (!(c == -1))
- return 4;
- if (!(strcmp (argv[0], "program") == 0))
- return 5;
- if (!(strcmp (argv[1], "donald") == 0))
- return 6;
- if (!(strcmp (argv[2], "-p") == 0))
- return 7;
- if (!(strcmp (argv[3], "billy") == 0))
- return 8;
- if (!(strcmp (argv[4], "duck") == 0))
- return 9;
- if (!(strcmp (argv[5], "-a") == 0))
- return 10;
- if (!(strcmp (argv[6], "bar") == 0))
- return 11;
- if (!(optind == 1))
- return 12;
- }
- /* Detect MacOS 10.5, AIX 7.1 bug. */
- {
- static char program[] = "program";
- static char ab[] = "-ab";
- char *argv[3] = { program, ab, NULL };
- optind = OPTIND_MIN;
- opterr = 0;
- if (getopt (2, argv, "ab:") != 'a')
- return 13;
- if (getopt (2, argv, "ab:") != '?')
- return 14;
- if (optopt != 'b')
- return 15;
- if (optind != 2)
- return 16;
- }
-
- return 0;
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_getopt_posix=yes
-else
- gl_cv_func_getopt_posix=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- CPPFLAGS=$gl_save_CPPFLAGS
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_getopt_posix" >&5
-$as_echo "$gl_cv_func_getopt_posix" >&6; }
- case "$gl_cv_func_getopt_posix" in
- *no) gl_replace_getopt=yes ;;
- esac
- fi
-
- if test -z "$gl_replace_getopt" && test $gl_getopt_required = GNU; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working GNU getopt function" >&5
-$as_echo_n "checking for working GNU getopt function... " >&6; }
-if ${gl_cv_func_getopt_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # Even with POSIXLY_CORRECT, the GNU extension of leading '-' in the
- # optstring is necessary for programs like m4 that have POSIX-mandated
- # semantics for supporting options interspersed with files.
- # Also, since getopt_long is a GNU extension, we require optind=0.
- # Bash ties 'set -o posix' to a non-exported POSIXLY_CORRECT;
- # so take care to revert to the correct (non-)export state.
- gl_awk_probe='BEGIN { if ("POSIXLY_CORRECT" in ENVIRON) print "x" }'
- case ${POSIXLY_CORRECT+x}`$AWK "$gl_awk_probe" </dev/null` in
- xx) gl_had_POSIXLY_CORRECT=exported ;;
- x) gl_had_POSIXLY_CORRECT=yes ;;
- *) gl_had_POSIXLY_CORRECT= ;;
- esac
- POSIXLY_CORRECT=1
- export POSIXLY_CORRECT
- if test "$cross_compiling" = yes; then :
- case $host_os:$ac_cv_have_decl_optreset in
- *-gnu*:* | mingw*:*) gl_cv_func_getopt_gnu=no;;
- *:yes) gl_cv_func_getopt_gnu=no;;
- *) gl_cv_func_getopt_gnu=yes;;
- esac
-
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <getopt.h>
- #include <stddef.h>
- #include <string.h>
-
-#include <stdlib.h>
-#if defined __MACH__ && defined __APPLE__
-/* Avoid a crash on MacOS X. */
-#include <mach/mach.h>
-#include <mach/mach_error.h>
-#include <mach/thread_status.h>
-#include <mach/exception.h>
-#include <mach/task.h>
-#include <pthread.h>
-/* The exception port on which our thread listens. */
-static mach_port_t our_exception_port;
-/* The main function of the thread listening for exceptions of type
- EXC_BAD_ACCESS. */
-static void *
-mach_exception_thread (void *arg)
-{
- /* Buffer for a message to be received. */
- struct {
- mach_msg_header_t head;
- mach_msg_body_t msgh_body;
- char data[1024];
- } msg;
- mach_msg_return_t retval;
- /* Wait for a message on the exception port. */
- retval = mach_msg (&msg.head, MACH_RCV_MSG | MACH_RCV_LARGE, 0, sizeof (msg),
- our_exception_port, MACH_MSG_TIMEOUT_NONE, MACH_PORT_NULL);
- if (retval != MACH_MSG_SUCCESS)
- abort ();
- exit (1);
-}
-static void
-nocrash_init (void)
-{
- mach_port_t self = mach_task_self ();
- /* Allocate a port on which the thread shall listen for exceptions. */
- if (mach_port_allocate (self, MACH_PORT_RIGHT_RECEIVE, &our_exception_port)
- == KERN_SUCCESS) {
- /* See http://web.mit.edu/darwin/src/modules/xnu/osfmk/man/mach_port_insert_right.html. */
- if (mach_port_insert_right (self, our_exception_port, our_exception_port,
- MACH_MSG_TYPE_MAKE_SEND)
- == KERN_SUCCESS) {
- /* The exceptions we want to catch. Only EXC_BAD_ACCESS is interesting
- for us. */
- exception_mask_t mask = EXC_MASK_BAD_ACCESS;
- /* Create the thread listening on the exception port. */
- pthread_attr_t attr;
- pthread_t thread;
- if (pthread_attr_init (&attr) == 0
- && pthread_attr_setdetachstate (&attr, PTHREAD_CREATE_DETACHED) == 0
- && pthread_create (&thread, &attr, mach_exception_thread, NULL) == 0) {
- pthread_attr_destroy (&attr);
- /* Replace the exception port info for these exceptions with our own.
- Note that we replace the exception port for the entire task, not only
- for a particular thread. This has the effect that when our exception
- port gets the message, the thread specific exception port has already
- been asked, and we don't need to bother about it.
- See http://web.mit.edu/darwin/src/modules/xnu/osfmk/man/task_set_exception_ports.html. */
- task_set_exception_ports (self, mask, our_exception_port,
- EXCEPTION_DEFAULT, MACHINE_THREAD_STATE);
- }
- }
- }
-}
-#elif (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
-/* Avoid a crash on native Windows. */
-#define WIN32_LEAN_AND_MEAN
-#include <windows.h>
-#include <winerror.h>
-static LONG WINAPI
-exception_filter (EXCEPTION_POINTERS *ExceptionInfo)
-{
- switch (ExceptionInfo->ExceptionRecord->ExceptionCode)
- {
- case EXCEPTION_ACCESS_VIOLATION:
- case EXCEPTION_IN_PAGE_ERROR:
- case EXCEPTION_STACK_OVERFLOW:
- case EXCEPTION_GUARD_PAGE:
- case EXCEPTION_PRIV_INSTRUCTION:
- case EXCEPTION_ILLEGAL_INSTRUCTION:
- case EXCEPTION_DATATYPE_MISALIGNMENT:
- case EXCEPTION_ARRAY_BOUNDS_EXCEEDED:
- case EXCEPTION_NONCONTINUABLE_EXCEPTION:
- exit (1);
- }
- return EXCEPTION_CONTINUE_SEARCH;
-}
-static void
-nocrash_init (void)
-{
- SetUnhandledExceptionFilter ((LPTOP_LEVEL_EXCEPTION_FILTER) exception_filter);
-}
-#else
-/* Avoid a crash on POSIX systems. */
-#include <signal.h>
-/* A POSIX signal handler. */
-static void
-exception_handler (int sig)
-{
- exit (1);
-}
-static void
-nocrash_init (void)
-{
-#ifdef SIGSEGV
- signal (SIGSEGV, exception_handler);
-#endif
-#ifdef SIGBUS
- signal (SIGBUS, exception_handler);
-#endif
-}
-#endif
-
-
-int
-main ()
-{
-
- int result = 0;
-
- nocrash_init();
-
- /* This code succeeds on glibc 2.8, OpenBSD 4.0, Cygwin, mingw,
- and fails on MacOS X 10.5, AIX 5.2, HP-UX 11, IRIX 6.5,
- OSF/1 5.1, Solaris 10. */
- {
- static char conftest[] = "conftest";
- static char plus[] = "-+";
- char *argv[3] = { conftest, plus, NULL };
- opterr = 0;
- if (getopt (2, argv, "+a") != '?')
- result |= 1;
- }
- /* This code succeeds on glibc 2.8, mingw,
- and fails on MacOS X 10.5, OpenBSD 4.0, AIX 5.2, HP-UX 11,
- IRIX 6.5, OSF/1 5.1, Solaris 10, Cygwin 1.5.x. */
- {
- static char program[] = "program";
- static char p[] = "-p";
- static char foo[] = "foo";
- static char bar[] = "bar";
- char *argv[] = { program, p, foo, bar, NULL };
-
- optind = 1;
- if (getopt (4, argv, "p::") != 'p')
- result |= 2;
- else if (optarg != NULL)
- result |= 4;
- else if (getopt (4, argv, "p::") != -1)
- result |= 6;
- else if (optind != 2)
- result |= 8;
- }
- /* This code succeeds on glibc 2.8 and fails on Cygwin 1.7.0. */
- {
- static char program[] = "program";
- static char foo[] = "foo";
- static char p[] = "-p";
- char *argv[] = { program, foo, p, NULL };
- optind = 0;
- if (getopt (3, argv, "-p") != 1)
- result |= 16;
- else if (getopt (3, argv, "-p") != 'p')
- result |= 32;
- }
- /* This code fails on glibc 2.11. */
- {
- static char program[] = "program";
- static char b[] = "-b";
- static char a[] = "-a";
- char *argv[] = { program, b, a, NULL };
- optind = opterr = 0;
- if (getopt (3, argv, "+:a:b") != 'b')
- result |= 64;
- else if (getopt (3, argv, "+:a:b") != ':')
- result |= 64;
- }
- /* This code dumps core on glibc 2.14. */
- {
- static char program[] = "program";
- static char w[] = "-W";
- static char dummy[] = "dummy";
- char *argv[] = { program, w, dummy, NULL };
- optind = opterr = 1;
- if (getopt (3, argv, "W;") != 'W')
- result |= 128;
- }
- return result;
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_getopt_gnu=yes
-else
- gl_cv_func_getopt_gnu=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- case $gl_had_POSIXLY_CORRECT in
- exported) ;;
- yes) { POSIXLY_CORRECT=; unset POSIXLY_CORRECT;}; POSIXLY_CORRECT=1 ;;
- *) { POSIXLY_CORRECT=; unset POSIXLY_CORRECT;} ;;
- esac
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_getopt_gnu" >&5
-$as_echo "$gl_cv_func_getopt_gnu" >&6; }
- if test "$gl_cv_func_getopt_gnu" = "no"; then
- gl_replace_getopt=yes
- fi
- fi
-
-
-
-
-
- REPLACE_GETOPT=0
-
-
- if test -n "$gl_replace_getopt"; then :
-
- REPLACE_GETOPT=1
-
-fi
-
-
- if test $REPLACE_GETOPT = 1; then
-
- GETOPT_H=getopt.h
-
-$as_echo "#define __GETOPT_PREFIX rpl_" >>confdefs.h
-
-
-
- fi
-
-ac_fn_c_check_decl "$LINENO" "getenv" "ac_cv_have_decl_getenv" "$ac_includes_default"
-if test "x$ac_cv_have_decl_getenv" = xyes; then :
- ac_have_decl=1
-else
- ac_have_decl=0
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_GETENV $ac_have_decl
-_ACEOF
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nl_langinfo and CODESET" >&5
-$as_echo_n "checking for nl_langinfo and CODESET... " >&6; }
-if ${am_cv_langinfo_codeset+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <langinfo.h>
-int
-main ()
-{
-char* cs = nl_langinfo(CODESET); return !cs;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_langinfo_codeset=yes
-else
- am_cv_langinfo_codeset=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_langinfo_codeset" >&5
-$as_echo "$am_cv_langinfo_codeset" >&6; }
- if test $am_cv_langinfo_codeset = yes; then
-
-$as_echo "#define HAVE_LANGINFO_CODESET 1" >>confdefs.h
-
- fi
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fcntl.h" >&5
-$as_echo_n "checking for working fcntl.h... " >&6; }
-if ${gl_cv_header_working_fcntl_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- gl_cv_header_working_fcntl_h=cross-compiling
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
- #include <sys/stat.h>
- #if HAVE_UNISTD_H
- # include <unistd.h>
- #else /* on Windows with MSVC */
- # include <io.h>
- # include <stdlib.h>
- # defined sleep(n) _sleep ((n) * 1000)
- #endif
- #include <fcntl.h>
- #ifndef O_NOATIME
- #define O_NOATIME 0
- #endif
- #ifndef O_NOFOLLOW
- #define O_NOFOLLOW 0
- #endif
- static int const constants[] =
- {
- O_CREAT, O_EXCL, O_NOCTTY, O_TRUNC, O_APPEND,
- O_NONBLOCK, O_SYNC, O_ACCMODE, O_RDONLY, O_RDWR, O_WRONLY
- };
-
-int
-main ()
-{
-
- int result = !constants;
- #if HAVE_SYMLINK
- {
- static char const sym[] = "conftest.sym";
- if (symlink (".", sym) != 0)
- result |= 2;
- else
- {
- int fd = open (sym, O_RDONLY | O_NOFOLLOW);
- if (fd >= 0)
- {
- close (fd);
- result |= 4;
- }
- }
- unlink (sym);
- }
- #endif
- {
- static char const file[] = "confdefs.h";
- int fd = open (file, O_RDONLY | O_NOATIME);
- if (fd < 0)
- result |= 8;
- else
- {
- struct stat st0;
- if (fstat (fd, &st0) != 0)
- result |= 16;
- else
- {
- char c;
- sleep (1);
- if (read (fd, &c, 1) != 1)
- result |= 24;
- else
- {
- if (close (fd) != 0)
- result |= 32;
- else
- {
- struct stat st1;
- if (stat (file, &st1) != 0)
- result |= 40;
- else
- if (st0.st_atime != st1.st_atime)
- result |= 64;
- }
- }
- }
- }
- }
- return result;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_header_working_fcntl_h=yes
-else
- case $? in #(
- 4) gl_cv_header_working_fcntl_h='no (bad O_NOFOLLOW)';; #(
- 64) gl_cv_header_working_fcntl_h='no (bad O_NOATIME)';; #(
- 68) gl_cv_header_working_fcntl_h='no (bad O_NOATIME, O_NOFOLLOW)';; #(
- *) gl_cv_header_working_fcntl_h='no';;
- esac
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_header_working_fcntl_h" >&5
-$as_echo "$gl_cv_header_working_fcntl_h" >&6; }
-
- case $gl_cv_header_working_fcntl_h in #(
- *O_NOATIME* | no | cross-compiling) ac_val=0;; #(
- *) ac_val=1;;
- esac
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_WORKING_O_NOATIME $ac_val
-_ACEOF
-
-
- case $gl_cv_header_working_fcntl_h in #(
- *O_NOFOLLOW* | no | cross-compiling) ac_val=0;; #(
- *) ac_val=1;;
- esac
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_WORKING_O_NOFOLLOW $ac_val
-_ACEOF
-
-
-ac_fn_c_check_decl "$LINENO" "getc_unlocked" "ac_cv_have_decl_getc_unlocked" "$ac_includes_default"
-if test "x$ac_cv_have_decl_getc_unlocked" = xyes; then :
- ac_have_decl=1
-else
- ac_have_decl=0
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_GETC_UNLOCKED $ac_have_decl
-_ACEOF
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C Library >= 2.1 or uClibc" >&5
-$as_echo_n "checking whether we are using the GNU C Library >= 2.1 or uClibc... " >&6; }
-if ${ac_cv_gnu_library_2_1+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <features.h>
-#ifdef __GNU_LIBRARY__
- #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
- Lucky GNU user
- #endif
-#endif
-#ifdef __UCLIBC__
- Lucky user
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "Lucky" >/dev/null 2>&1; then :
- ac_cv_gnu_library_2_1=yes
-else
- ac_cv_gnu_library_2_1=no
-fi
-rm -f conftest*
-
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_gnu_library_2_1" >&5
-$as_echo "$ac_cv_gnu_library_2_1" >&6; }
-
- GLIBC21="$ac_cv_gnu_library_2_1"
-
-
-
- GNULIB_BTOWC=0;
- GNULIB_WCTOB=0;
- GNULIB_MBSINIT=0;
- GNULIB_MBRTOWC=0;
- GNULIB_MBRLEN=0;
- GNULIB_MBSRTOWCS=0;
- GNULIB_MBSNRTOWCS=0;
- GNULIB_WCRTOMB=0;
- GNULIB_WCSRTOMBS=0;
- GNULIB_WCSNRTOMBS=0;
- GNULIB_WCWIDTH=0;
- GNULIB_WMEMCHR=0;
- GNULIB_WMEMCMP=0;
- GNULIB_WMEMCPY=0;
- GNULIB_WMEMMOVE=0;
- GNULIB_WMEMSET=0;
- GNULIB_WCSLEN=0;
- GNULIB_WCSNLEN=0;
- GNULIB_WCSCPY=0;
- GNULIB_WCPCPY=0;
- GNULIB_WCSNCPY=0;
- GNULIB_WCPNCPY=0;
- GNULIB_WCSCAT=0;
- GNULIB_WCSNCAT=0;
- GNULIB_WCSCMP=0;
- GNULIB_WCSNCMP=0;
- GNULIB_WCSCASECMP=0;
- GNULIB_WCSNCASECMP=0;
- GNULIB_WCSCOLL=0;
- GNULIB_WCSXFRM=0;
- GNULIB_WCSDUP=0;
- GNULIB_WCSCHR=0;
- GNULIB_WCSRCHR=0;
- GNULIB_WCSCSPN=0;
- GNULIB_WCSSPN=0;
- GNULIB_WCSPBRK=0;
- GNULIB_WCSSTR=0;
- GNULIB_WCSTOK=0;
- GNULIB_WCSWIDTH=0;
- HAVE_BTOWC=1;
- HAVE_MBSINIT=1;
- HAVE_MBRTOWC=1;
- HAVE_MBRLEN=1;
- HAVE_MBSRTOWCS=1;
- HAVE_MBSNRTOWCS=1;
- HAVE_WCRTOMB=1;
- HAVE_WCSRTOMBS=1;
- HAVE_WCSNRTOMBS=1;
- HAVE_WMEMCHR=1;
- HAVE_WMEMCMP=1;
- HAVE_WMEMCPY=1;
- HAVE_WMEMMOVE=1;
- HAVE_WMEMSET=1;
- HAVE_WCSLEN=1;
- HAVE_WCSNLEN=1;
- HAVE_WCSCPY=1;
- HAVE_WCPCPY=1;
- HAVE_WCSNCPY=1;
- HAVE_WCPNCPY=1;
- HAVE_WCSCAT=1;
- HAVE_WCSNCAT=1;
- HAVE_WCSCMP=1;
- HAVE_WCSNCMP=1;
- HAVE_WCSCASECMP=1;
- HAVE_WCSNCASECMP=1;
- HAVE_WCSCOLL=1;
- HAVE_WCSXFRM=1;
- HAVE_WCSDUP=1;
- HAVE_WCSCHR=1;
- HAVE_WCSRCHR=1;
- HAVE_WCSCSPN=1;
- HAVE_WCSSPN=1;
- HAVE_WCSPBRK=1;
- HAVE_WCSSTR=1;
- HAVE_WCSTOK=1;
- HAVE_WCSWIDTH=1;
- HAVE_DECL_WCTOB=1;
- HAVE_DECL_WCWIDTH=1;
- REPLACE_MBSTATE_T=0;
- REPLACE_BTOWC=0;
- REPLACE_WCTOB=0;
- REPLACE_MBSINIT=0;
- REPLACE_MBRTOWC=0;
- REPLACE_MBRLEN=0;
- REPLACE_MBSRTOWCS=0;
- REPLACE_MBSNRTOWCS=0;
- REPLACE_WCRTOMB=0;
- REPLACE_WCSRTOMBS=0;
- REPLACE_WCSNRTOMBS=0;
- REPLACE_WCWIDTH=0;
- REPLACE_WCSWIDTH=0;
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for mbstate_t" >&5
-$as_echo_n "checking for mbstate_t... " >&6; }
-if ${ac_cv_type_mbstate_t+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$ac_includes_default
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int
-main ()
-{
-mbstate_t x; return sizeof x;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_type_mbstate_t=yes
-else
- ac_cv_type_mbstate_t=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_mbstate_t" >&5
-$as_echo "$ac_cv_type_mbstate_t" >&6; }
- if test $ac_cv_type_mbstate_t = yes; then
-
-$as_echo "#define HAVE_MBSTATE_T 1" >>confdefs.h
-
- else
-
-$as_echo "#define mbstate_t int" >>confdefs.h
-
- fi
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a traditional japanese locale" >&5
-$as_echo_n "checking for a traditional japanese locale... " >&6; }
-if ${gt_cv_locale_ja+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <time.h>
-#if HAVE_LANGINFO_CODESET
-# include <langinfo.h>
-#endif
-#include <stdlib.h>
-#include <string.h>
-struct tm t;
-char buf[16];
-int main ()
-{
- const char *p;
- /* Check whether the given locale name is recognized by the system. */
-#if (defined _WIN32 || defined __WIN32__) && !defined __CYGWIN__
- /* On native Windows, setlocale(category, "") looks at the system settings,
- not at the environment variables. Also, when an encoding suffix such
- as ".65001" or ".54936" is specified, it succeeds but sets the LC_CTYPE
- category of the locale to "C". */
- if (setlocale (LC_ALL, getenv ("LC_ALL")) == NULL
- || strcmp (setlocale (LC_CTYPE, NULL), "C") == 0)
- return 1;
-#else
- if (setlocale (LC_ALL, "") == NULL) return 1;
-#endif
- /* Check whether nl_langinfo(CODESET) is nonempty and not "ASCII" or "646".
- On MacOS X 10.3.5 (Darwin 7.5) in the fr_FR locale, nl_langinfo(CODESET)
- is empty, and the behaviour of Tcl 8.4 in this locale is not useful.
- On OpenBSD 4.0, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "646". In this situation,
- some unit tests fail.
- On MirBSD 10, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "UTF-8". */
-#if HAVE_LANGINFO_CODESET
- {
- const char *cs = nl_langinfo (CODESET);
- if (cs[0] == '\0' || strcmp (cs, "ASCII") == 0 || strcmp (cs, "646") == 0
- || strcmp (cs, "UTF-8") == 0)
- return 1;
- }
-#endif
-#ifdef __CYGWIN__
- /* On Cygwin, avoid locale names without encoding suffix, because the
- locale_charset() function relies on the encoding suffix. Note that
- LC_ALL is set on the command line. */
- if (strchr (getenv ("LC_ALL"), '.') == NULL) return 1;
-#endif
- /* Check whether MB_CUR_MAX is > 1. This excludes the dysfunctional locales
- on Cygwin 1.5.x. */
- if (MB_CUR_MAX == 1)
- return 1;
- /* Check whether in a month name, no byte in the range 0x80..0x9F occurs.
- This excludes the UTF-8 encoding (except on MirBSD). */
- t.tm_year = 1975 - 1900; t.tm_mon = 2 - 1; t.tm_mday = 4;
- if (strftime (buf, sizeof (buf), "%B", &t) < 2) return 1;
- for (p = buf; *p != '\0'; p++)
- if ((unsigned char) *p >= 0x80 && (unsigned char) *p < 0xa0)
- return 1;
- return 0;
-}
-
-_ACEOF
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest$ac_exeext; then
- case "$host_os" in
- # Handle native Windows specially, because there setlocale() interprets
- # "ar" as "Arabic" or "Arabic_Saudi Arabia.1256",
- # "fr" or "fra" as "French" or "French_France.1252",
- # "ge"(!) or "deu"(!) as "German" or "German_Germany.1252",
- # "ja" as "Japanese" or "Japanese_Japan.932",
- # and similar.
- mingw*)
- # Note that on native Windows, the Japanese locale is
- # Japanese_Japan.932, and CP932 is very different from EUC-JP, so we
- # cannot use it here.
- gt_cv_locale_ja=none
- ;;
- *)
- # Setting LC_ALL is not enough. Need to set LC_TIME to empty, because
- # otherwise on MacOS X 10.3.5 the LC_TIME=C from the beginning of the
- # configure script would override the LC_ALL setting. Likewise for
- # LC_CTYPE, which is also set at the beginning of the configure script.
- # Test for the AIX locale name.
- if (LC_ALL=ja_JP LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja_JP
- else
- # Test for the locale name with explicit encoding suffix.
- if (LC_ALL=ja_JP.EUC-JP LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja_JP.EUC-JP
- else
- # Test for the HP-UX, OSF/1, NetBSD locale name.
- if (LC_ALL=ja_JP.eucJP LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja_JP.eucJP
- else
- # Test for the IRIX, FreeBSD locale name.
- if (LC_ALL=ja_JP.EUC LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja_JP.EUC
- else
- # Test for the Solaris 7 locale name.
- if (LC_ALL=ja LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja
- else
- # Special test for NetBSD 1.6.
- if test -f /usr/share/locale/ja_JP.eucJP/LC_CTYPE; then
- gt_cv_locale_ja=ja_JP.eucJP
- else
- # None found.
- gt_cv_locale_ja=none
- fi
- fi
- fi
- fi
- fi
- fi
- ;;
- esac
- fi
- rm -fr conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_locale_ja" >&5
-$as_echo "$gt_cv_locale_ja" >&6; }
- LOCALE_JA=$gt_cv_locale_ja
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a transitional chinese locale" >&5
-$as_echo_n "checking for a transitional chinese locale... " >&6; }
-if ${gt_cv_locale_zh_CN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <stdlib.h>
-#include <time.h>
-#if HAVE_LANGINFO_CODESET
-# include <langinfo.h>
-#endif
-#include <stdlib.h>
-#include <string.h>
-struct tm t;
-char buf[16];
-int main ()
-{
- const char *p;
- /* Check whether the given locale name is recognized by the system. */
-#if (defined _WIN32 || defined __WIN32__) && !defined __CYGWIN__
- /* On native Windows, setlocale(category, "") looks at the system settings,
- not at the environment variables. Also, when an encoding suffix such
- as ".65001" or ".54936" is specified, it succeeds but sets the LC_CTYPE
- category of the locale to "C". */
- if (setlocale (LC_ALL, getenv ("LC_ALL")) == NULL
- || strcmp (setlocale (LC_CTYPE, NULL), "C") == 0)
- return 1;
-#else
- if (setlocale (LC_ALL, "") == NULL) return 1;
-#endif
- /* Check whether nl_langinfo(CODESET) is nonempty and not "ASCII" or "646".
- On MacOS X 10.3.5 (Darwin 7.5) in the fr_FR locale, nl_langinfo(CODESET)
- is empty, and the behaviour of Tcl 8.4 in this locale is not useful.
- On OpenBSD 4.0, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "646". In this situation,
- some unit tests fail.
- On MirBSD 10, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "UTF-8". */
-#if HAVE_LANGINFO_CODESET
- {
- const char *cs = nl_langinfo (CODESET);
- if (cs[0] == '\0' || strcmp (cs, "ASCII") == 0 || strcmp (cs, "646") == 0
- || strcmp (cs, "UTF-8") == 0)
- return 1;
- }
-#endif
-#ifdef __CYGWIN__
- /* On Cygwin, avoid locale names without encoding suffix, because the
- locale_charset() function relies on the encoding suffix. Note that
- LC_ALL is set on the command line. */
- if (strchr (getenv ("LC_ALL"), '.') == NULL) return 1;
-#endif
- /* Check whether in a month name, no byte in the range 0x80..0x9F occurs.
- This excludes the UTF-8 encoding (except on MirBSD). */
- t.tm_year = 1975 - 1900; t.tm_mon = 2 - 1; t.tm_mday = 4;
- if (strftime (buf, sizeof (buf), "%B", &t) < 2) return 1;
- for (p = buf; *p != '\0'; p++)
- if ((unsigned char) *p >= 0x80 && (unsigned char) *p < 0xa0)
- return 1;
- /* Check whether a typical GB18030 multibyte sequence is recognized as a
- single wide character. This excludes the GB2312 and GBK encodings. */
- if (mblen ("\203\062\332\066", 5) != 4)
- return 1;
- return 0;
-}
-
-_ACEOF
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest$ac_exeext; then
- case "$host_os" in
- # Handle native Windows specially, because there setlocale() interprets
- # "ar" as "Arabic" or "Arabic_Saudi Arabia.1256",
- # "fr" or "fra" as "French" or "French_France.1252",
- # "ge"(!) or "deu"(!) as "German" or "German_Germany.1252",
- # "ja" as "Japanese" or "Japanese_Japan.932",
- # and similar.
- mingw*)
- # Test for the hypothetical native Windows locale name.
- if (LC_ALL=Chinese_China.54936 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_zh_CN=Chinese_China.54936
- else
- # None found.
- gt_cv_locale_zh_CN=none
- fi
- ;;
- solaris2.8)
- # On Solaris 8, the locales zh_CN.GB18030, zh_CN.GBK, zh.GBK are
- # broken. One witness is the test case in gl_MBRTOWC_SANITYCHECK.
- # Another witness is that "LC_ALL=zh_CN.GB18030 bash -c true" dumps core.
- gt_cv_locale_zh_CN=none
- ;;
- *)
- # Setting LC_ALL is not enough. Need to set LC_TIME to empty, because
- # otherwise on MacOS X 10.3.5 the LC_TIME=C from the beginning of the
- # configure script would override the LC_ALL setting. Likewise for
- # LC_CTYPE, which is also set at the beginning of the configure script.
- # Test for the locale name without encoding suffix.
- if (LC_ALL=zh_CN LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_zh_CN=zh_CN
- else
- # Test for the locale name with explicit encoding suffix.
- if (LC_ALL=zh_CN.GB18030 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_zh_CN=zh_CN.GB18030
- else
- # None found.
- gt_cv_locale_zh_CN=none
- fi
- fi
- ;;
- esac
- else
- # If there was a link error, due to mblen(), the system is so old that
- # it certainly doesn't have a chinese locale.
- gt_cv_locale_zh_CN=none
- fi
- rm -fr conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_locale_zh_CN" >&5
-$as_echo "$gt_cv_locale_zh_CN" >&6; }
- LOCALE_ZH_CN=$gt_cv_locale_zh_CN
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a french Unicode locale" >&5
-$as_echo_n "checking for a french Unicode locale... " >&6; }
-if ${gt_cv_locale_fr_utf8+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <time.h>
-#if HAVE_LANGINFO_CODESET
-# include <langinfo.h>
-#endif
-#include <stdlib.h>
-#include <string.h>
-struct tm t;
-char buf[16];
-int main () {
- /* On BeOS and Haiku, locales are not implemented in libc. Rather, libintl
- imitates locale dependent behaviour by looking at the environment
- variables, and all locales use the UTF-8 encoding. */
-#if !(defined __BEOS__ || defined __HAIKU__)
- /* Check whether the given locale name is recognized by the system. */
-# if (defined _WIN32 || defined __WIN32__) && !defined __CYGWIN__
- /* On native Windows, setlocale(category, "") looks at the system settings,
- not at the environment variables. Also, when an encoding suffix such
- as ".65001" or ".54936" is specified, it succeeds but sets the LC_CTYPE
- category of the locale to "C". */
- if (setlocale (LC_ALL, getenv ("LC_ALL")) == NULL
- || strcmp (setlocale (LC_CTYPE, NULL), "C") == 0)
- return 1;
-# else
- if (setlocale (LC_ALL, "") == NULL) return 1;
-# endif
- /* Check whether nl_langinfo(CODESET) is nonempty and not "ASCII" or "646".
- On MacOS X 10.3.5 (Darwin 7.5) in the fr_FR locale, nl_langinfo(CODESET)
- is empty, and the behaviour of Tcl 8.4 in this locale is not useful.
- On OpenBSD 4.0, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "646". In this situation,
- some unit tests fail. */
-# if HAVE_LANGINFO_CODESET
- {
- const char *cs = nl_langinfo (CODESET);
- if (cs[0] == '\0' || strcmp (cs, "ASCII") == 0 || strcmp (cs, "646") == 0)
- return 1;
- }
-# endif
-# ifdef __CYGWIN__
- /* On Cygwin, avoid locale names without encoding suffix, because the
- locale_charset() function relies on the encoding suffix. Note that
- LC_ALL is set on the command line. */
- if (strchr (getenv ("LC_ALL"), '.') == NULL) return 1;
-# endif
- /* Check whether in the abbreviation of the second month, the second
- character (should be U+00E9: LATIN SMALL LETTER E WITH ACUTE) is
- two bytes long, with UTF-8 encoding. */
- t.tm_year = 1975 - 1900; t.tm_mon = 2 - 1; t.tm_mday = 4;
- if (strftime (buf, sizeof (buf), "%b", &t) < 4
- || buf[1] != (char) 0xc3 || buf[2] != (char) 0xa9 || buf[3] != 'v')
- return 1;
-#endif
-#if !defined __BIONIC__ /* Bionic libc's 'struct lconv' is just a dummy. */
- /* Check whether the decimal separator is a comma.
- On NetBSD 3.0 in the fr_FR.ISO8859-1 locale, localeconv()->decimal_point
- are nl_langinfo(RADIXCHAR) are both ".". */
- if (localeconv () ->decimal_point[0] != ',') return 1;
-#endif
- return 0;
-}
-
-_ACEOF
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest$ac_exeext; then
- case "$host_os" in
- # Handle native Windows specially, because there setlocale() interprets
- # "ar" as "Arabic" or "Arabic_Saudi Arabia.1256",
- # "fr" or "fra" as "French" or "French_France.1252",
- # "ge"(!) or "deu"(!) as "German" or "German_Germany.1252",
- # "ja" as "Japanese" or "Japanese_Japan.932",
- # and similar.
- mingw*)
- # Test for the hypothetical native Windows locale name.
- if (LC_ALL=French_France.65001 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr_utf8=French_France.65001
- else
- # None found.
- gt_cv_locale_fr_utf8=none
- fi
- ;;
- *)
- # Setting LC_ALL is not enough. Need to set LC_TIME to empty, because
- # otherwise on MacOS X 10.3.5 the LC_TIME=C from the beginning of the
- # configure script would override the LC_ALL setting. Likewise for
- # LC_CTYPE, which is also set at the beginning of the configure script.
- # Test for the usual locale name.
- if (LC_ALL=fr_FR LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr_utf8=fr_FR
- else
- # Test for the locale name with explicit encoding suffix.
- if (LC_ALL=fr_FR.UTF-8 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr_utf8=fr_FR.UTF-8
- else
- # Test for the Solaris 7 locale name.
- if (LC_ALL=fr.UTF-8 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr_utf8=fr.UTF-8
- else
- # None found.
- gt_cv_locale_fr_utf8=none
- fi
- fi
- fi
- ;;
- esac
- fi
- rm -fr conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_locale_fr_utf8" >&5
-$as_echo "$gt_cv_locale_fr_utf8" >&6; }
- LOCALE_FR_UTF8=$gt_cv_locale_fr_utf8
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5
-$as_echo_n "checking for stdbool.h that conforms to C99... " >&6; }
-if ${ac_cv_header_stdbool_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- #include <stdbool.h>
- #ifndef bool
- "error: bool is not defined"
- #endif
- #ifndef false
- "error: false is not defined"
- #endif
- #if false
- "error: false is not 0"
- #endif
- #ifndef true
- "error: true is not defined"
- #endif
- #if true != 1
- "error: true is not 1"
- #endif
- #ifndef __bool_true_false_are_defined
- "error: __bool_true_false_are_defined is not defined"
- #endif
-
- struct s { _Bool s: 1; _Bool t; } s;
-
- char a[true == 1 ? 1 : -1];
- char b[false == 0 ? 1 : -1];
- char c[__bool_true_false_are_defined == 1 ? 1 : -1];
- char d[(bool) 0.5 == true ? 1 : -1];
- /* See body of main program for 'e'. */
- char f[(_Bool) 0.0 == false ? 1 : -1];
- char g[true];
- char h[sizeof (_Bool)];
- char i[sizeof s.t];
- enum { j = false, k = true, l = false * true, m = true * 256 };
- /* The following fails for
- HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */
- _Bool n[m];
- char o[sizeof n == m * sizeof n[0] ? 1 : -1];
- char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1];
- /* Catch a bug in an HP-UX C compiler. See
- http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
- http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
- */
- _Bool q = true;
- _Bool *pq = &q;
-
-int
-main ()
-{
-
- bool e = &s;
- *pq |= q;
- *pq |= ! q;
- /* Refer to every declared value, to avoid compiler optimizations. */
- return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l
- + !m + !n + !o + !p + !q + !pq);
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdbool_h=yes
-else
- ac_cv_header_stdbool_h=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5
-$as_echo "$ac_cv_header_stdbool_h" >&6; }
- ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default"
-if test "x$ac_cv_type__Bool" = xyes; then :
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE__BOOL 1
-_ACEOF
-
-
-fi
-
-
-
- REPLACE_NULL=0;
- HAVE_WCHAR_T=1;
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for wchar_t" >&5
-$as_echo_n "checking for wchar_t... " >&6; }
-if ${gt_cv_c_wchar_t+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stddef.h>
- wchar_t foo = (wchar_t)'\0';
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gt_cv_c_wchar_t=yes
-else
- gt_cv_c_wchar_t=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_c_wchar_t" >&5
-$as_echo "$gt_cv_c_wchar_t" >&6; }
- if test $gt_cv_c_wchar_t = yes; then
-
-$as_echo "#define HAVE_WCHAR_T 1" >>confdefs.h
-
- fi
-
-
- GNULIB__EXIT=0;
- GNULIB_ATOLL=0;
- GNULIB_CALLOC_POSIX=0;
- GNULIB_CANONICALIZE_FILE_NAME=0;
- GNULIB_GETLOADAVG=0;
- GNULIB_GETSUBOPT=0;
- GNULIB_GRANTPT=0;
- GNULIB_MALLOC_POSIX=0;
- GNULIB_MBTOWC=0;
- GNULIB_MKDTEMP=0;
- GNULIB_MKOSTEMP=0;
- GNULIB_MKOSTEMPS=0;
- GNULIB_MKSTEMP=0;
- GNULIB_MKSTEMPS=0;
- GNULIB_POSIX_OPENPT=0;
- GNULIB_PTSNAME=0;
- GNULIB_PTSNAME_R=0;
- GNULIB_PUTENV=0;
- GNULIB_RANDOM=0;
- GNULIB_RANDOM_R=0;
- GNULIB_REALLOC_POSIX=0;
- GNULIB_REALPATH=0;
- GNULIB_RPMATCH=0;
- GNULIB_SETENV=0;
- GNULIB_STRTOD=0;
- GNULIB_STRTOLL=0;
- GNULIB_STRTOULL=0;
- GNULIB_SYSTEM_POSIX=0;
- GNULIB_UNLOCKPT=0;
- GNULIB_UNSETENV=0;
- GNULIB_WCTOMB=0;
- HAVE__EXIT=1;
- HAVE_ATOLL=1;
- HAVE_CANONICALIZE_FILE_NAME=1;
- HAVE_DECL_GETLOADAVG=1;
- HAVE_GETSUBOPT=1;
- HAVE_GRANTPT=1;
- HAVE_MKDTEMP=1;
- HAVE_MKOSTEMP=1;
- HAVE_MKOSTEMPS=1;
- HAVE_MKSTEMP=1;
- HAVE_MKSTEMPS=1;
- HAVE_POSIX_OPENPT=1;
- HAVE_PTSNAME=1;
- HAVE_PTSNAME_R=1;
- HAVE_RANDOM=1;
- HAVE_RANDOM_H=1;
- HAVE_RANDOM_R=1;
- HAVE_REALPATH=1;
- HAVE_RPMATCH=1;
- HAVE_SETENV=1;
- HAVE_DECL_SETENV=1;
- HAVE_STRTOD=1;
- HAVE_STRTOLL=1;
- HAVE_STRTOULL=1;
- HAVE_STRUCT_RANDOM_DATA=1;
- HAVE_SYS_LOADAVG_H=0;
- HAVE_UNLOCKPT=1;
- HAVE_DECL_UNSETENV=1;
- REPLACE_CALLOC=0;
- REPLACE_CANONICALIZE_FILE_NAME=0;
- REPLACE_MALLOC=0;
- REPLACE_MBTOWC=0;
- REPLACE_MKSTEMP=0;
- REPLACE_PTSNAME_R=0;
- REPLACE_PUTENV=0;
- REPLACE_RANDOM_R=0;
- REPLACE_REALLOC=0;
- REPLACE_REALPATH=0;
- REPLACE_SETENV=0;
- REPLACE_STRTOD=0;
- REPLACE_UNSETENV=0;
- REPLACE_WCTOMB=0;
-
-
- GNULIB_FFSL=0;
- GNULIB_FFSLL=0;
- GNULIB_MEMCHR=0;
- GNULIB_MEMMEM=0;
- GNULIB_MEMPCPY=0;
- GNULIB_MEMRCHR=0;
- GNULIB_RAWMEMCHR=0;
- GNULIB_STPCPY=0;
- GNULIB_STPNCPY=0;
- GNULIB_STRCHRNUL=0;
- GNULIB_STRDUP=0;
- GNULIB_STRNCAT=0;
- GNULIB_STRNDUP=0;
- GNULIB_STRNLEN=0;
- GNULIB_STRPBRK=0;
- GNULIB_STRSEP=0;
- GNULIB_STRSTR=0;
- GNULIB_STRCASESTR=0;
- GNULIB_STRTOK_R=0;
- GNULIB_MBSLEN=0;
- GNULIB_MBSNLEN=0;
- GNULIB_MBSCHR=0;
- GNULIB_MBSRCHR=0;
- GNULIB_MBSSTR=0;
- GNULIB_MBSCASECMP=0;
- GNULIB_MBSNCASECMP=0;
- GNULIB_MBSPCASECMP=0;
- GNULIB_MBSCASESTR=0;
- GNULIB_MBSCSPN=0;
- GNULIB_MBSPBRK=0;
- GNULIB_MBSSPN=0;
- GNULIB_MBSSEP=0;
- GNULIB_MBSTOK_R=0;
- GNULIB_STRERROR=0;
- GNULIB_STRERROR_R=0;
- GNULIB_STRSIGNAL=0;
- GNULIB_STRVERSCMP=0;
- HAVE_MBSLEN=0;
- HAVE_FFSL=1;
- HAVE_FFSLL=1;
- HAVE_MEMCHR=1;
- HAVE_DECL_MEMMEM=1;
- HAVE_MEMPCPY=1;
- HAVE_DECL_MEMRCHR=1;
- HAVE_RAWMEMCHR=1;
- HAVE_STPCPY=1;
- HAVE_STPNCPY=1;
- HAVE_STRCHRNUL=1;
- HAVE_DECL_STRDUP=1;
- HAVE_DECL_STRNDUP=1;
- HAVE_DECL_STRNLEN=1;
- HAVE_STRPBRK=1;
- HAVE_STRSEP=1;
- HAVE_STRCASESTR=1;
- HAVE_DECL_STRTOK_R=1;
- HAVE_DECL_STRERROR_R=1;
- HAVE_DECL_STRSIGNAL=1;
- HAVE_STRVERSCMP=1;
- REPLACE_MEMCHR=0;
- REPLACE_MEMMEM=0;
- REPLACE_STPNCPY=0;
- REPLACE_STRDUP=0;
- REPLACE_STRSTR=0;
- REPLACE_STRCASESTR=0;
- REPLACE_STRCHRNUL=0;
- REPLACE_STRERROR=0;
- REPLACE_STRERROR_R=0;
- REPLACE_STRNCAT=0;
- REPLACE_STRNDUP=0;
- REPLACE_STRNLEN=0;
- REPLACE_STRSIGNAL=0;
- REPLACE_STRTOK_R=0;
- UNDEFINE_STRTOK_R=0;
-
-
- REPLACE_STRERROR_0=0
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether strerror(0) succeeds" >&5
-$as_echo_n "checking whether strerror(0) succeeds... " >&6; }
-if ${gl_cv_func_strerror_0_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- gl_cv_func_strerror_0_works="guessing no"
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
- #include <errno.h>
-
-int
-main ()
-{
-int result = 0;
- char *str;
- errno = 0;
- str = strerror (0);
- if (!*str) result |= 1;
- if (errno) result |= 2;
- if (strstr (str, "nknown") || strstr (str, "ndefined"))
- result |= 4;
- return result;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_strerror_0_works=yes
-else
- gl_cv_func_strerror_0_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_strerror_0_works" >&5
-$as_echo "$gl_cv_func_strerror_0_works" >&6; }
- if test "$gl_cv_func_strerror_0_works" != yes; then
- REPLACE_STRERROR_0=1
-
-$as_echo "#define REPLACE_STRERROR_0 1" >>confdefs.h
-
- fi
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C/C++ restrict keyword" >&5
-$as_echo_n "checking for C/C++ restrict keyword... " >&6; }
-if ${ac_cv_c_restrict+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_restrict=no
- # The order here caters to the fact that C++ does not require restrict.
- for ac_kw in __restrict __restrict__ _Restrict restrict; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-typedef int * int_ptr;
- int foo (int_ptr $ac_kw ip) {
- return ip[0];
- }
-int
-main ()
-{
-int s[1];
- int * $ac_kw t = s;
- t[0] = 0;
- return foo(t)
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_c_restrict=$ac_kw
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_restrict" != no && break
- done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_restrict" >&5
-$as_echo "$ac_cv_c_restrict" >&6; }
-
- case $ac_cv_c_restrict in
- restrict) ;;
- no) $as_echo "#define restrict /**/" >>confdefs.h
- ;;
- *) cat >>confdefs.h <<_ACEOF
-#define restrict $ac_cv_c_restrict
-_ACEOF
- ;;
- esac
-
-
-
-
-
-
-
-
-
-
-
-
- if test $gl_cv_have_include_next = yes; then
- gl_cv_next_string_h='<'string.h'>'
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking absolute name of <string.h>" >&5
-$as_echo_n "checking absolute name of <string.h>... " >&6; }
-if ${gl_cv_next_string_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
- case "$host_os" in
- aix*) gl_absname_cpp="$ac_cpp -C" ;;
- *) gl_absname_cpp="$ac_cpp" ;;
- esac
-
- case "$host_os" in
- mingw*)
- gl_dirsep_regex='[/\\]'
- ;;
- *)
- gl_dirsep_regex='\/'
- ;;
- esac
- gl_make_literal_regex_sed='s,[]$^\\.*/[],\\&,g'
-
- gl_header_literal_regex=`echo 'string.h' \
- | sed -e "$gl_make_literal_regex_sed"`
- gl_absolute_header_sed="/${gl_dirsep_regex}${gl_header_literal_regex}/"'{
- s/.*"\(.*'"${gl_dirsep_regex}${gl_header_literal_regex}"'\)".*/\1/
- s|^/[^/]|//&|
- p
- q
- }'
- gl_cv_next_string_h='"'`(eval "$gl_absname_cpp conftest.$ac_ext") 2>&5 |
- sed -n "$gl_absolute_header_sed"`'"'
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_next_string_h" >&5
-$as_echo "$gl_cv_next_string_h" >&6; }
- fi
- NEXT_STRING_H=$gl_cv_next_string_h
-
- if test $gl_cv_have_include_next = yes || test $gl_cv_have_include_next = buggy; then
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next'
- gl_next_as_first_directive='<'string.h'>'
- else
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include'
- gl_next_as_first_directive=$gl_cv_next_string_h
- fi
- NEXT_AS_FIRST_DIRECTIVE_STRING_H=$gl_next_as_first_directive
-
-
-
-
-
-
- for gl_func in ffsl ffsll memmem mempcpy memrchr rawmemchr stpcpy stpncpy strchrnul strdup strncat strndup strnlen strpbrk strsep strcasestr strtok_r strerror_r strsignal strverscmp; do
- as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5
-$as_echo_n "checking whether $gl_func is declared without a macro... " >&6; }
-if eval \${$as_gl_Symbol+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-
-int
-main ()
-{
-#undef $gl_func
- (void) $gl_func;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$as_gl_Symbol=yes"
-else
- eval "$as_gl_Symbol=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$as_gl_Symbol
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- if eval test \"x\$"$as_gl_Symbol"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1
-_ACEOF
-
- eval ac_cv_have_decl_$gl_func=yes
-fi
- done
-
-
-ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
-if test "x$ac_cv_type_pid_t" = xyes; then :
-
-else
-
-cat >>confdefs.h <<_ACEOF
-#define pid_t int
-_ACEOF
-
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether <wchar.h> uses 'inline' correctly" >&5
-$as_echo_n "checking whether <wchar.h> uses 'inline' correctly... " >&6; }
-if ${gl_cv_header_wchar_h_correct_inline+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gl_cv_header_wchar_h_correct_inline=yes
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- #define wcstod renamed_wcstod
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-extern int zero (void);
-int main () { return zero(); }
-
-_ACEOF
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- mv conftest.$ac_objext conftest1.$ac_objext
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- #define wcstod renamed_wcstod
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int zero (void) { return 0; }
-
-_ACEOF
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- mv conftest.$ac_objext conftest2.$ac_objext
- if $CC -o conftest$ac_exeext $CFLAGS $LDFLAGS conftest1.$ac_objext conftest2.$ac_objext $LIBS >&5 2>&1; then
- :
- else
- gl_cv_header_wchar_h_correct_inline=no
- fi
- fi
- fi
- rm -f conftest1.$ac_objext conftest2.$ac_objext conftest$ac_exeext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_header_wchar_h_correct_inline" >&5
-$as_echo "$gl_cv_header_wchar_h_correct_inline" >&6; }
- if test $gl_cv_header_wchar_h_correct_inline = no; then
- as_fn_error $? "<wchar.h> cannot be used with this compiler ($CC $CFLAGS $CPPFLAGS).
-This is a known interoperability problem of glibc <= 2.5 with gcc >= 4.3 in
-C99 mode. You have four options:
- - Add the flag -fgnu89-inline to CC and reconfigure, or
- - Fix your include files, using parts of
- <http://sourceware.org/git/?p=glibc.git;a=commitdiff;h=b037a293a48718af30d706c2e18c929d0e69a621>, or
- - Use a gcc version older than 4.3, or
- - Don't use the flags -std=c99 or -std=gnu99.
-Configuration aborted." "$LINENO" 5
- fi
-
-
-
-
-
-
-
- if test $ac_cv_header_features_h = yes; then
- HAVE_FEATURES_H=1
- else
- HAVE_FEATURES_H=0
- fi
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for wint_t" >&5
-$as_echo_n "checking for wint_t... " >&6; }
-if ${gt_cv_c_wint_t+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be included
- before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
- wint_t foo = (wchar_t)'\0';
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gt_cv_c_wint_t=yes
-else
- gt_cv_c_wint_t=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_c_wint_t" >&5
-$as_echo "$gt_cv_c_wint_t" >&6; }
- if test $gt_cv_c_wint_t = yes; then
-
-$as_echo "#define HAVE_WINT_T 1" >>confdefs.h
-
- fi
-
-
- GNULIB_ISWBLANK=0;
- GNULIB_WCTYPE=0;
- GNULIB_ISWCTYPE=0;
- GNULIB_WCTRANS=0;
- GNULIB_TOWCTRANS=0;
- HAVE_ISWBLANK=1;
- HAVE_WCTYPE_T=1;
- HAVE_WCTRANS_T=1;
- REPLACE_ISWBLANK=0;
-
-
-
-
-
-
- if false; then
- GL_COND_LIBTOOL_TRUE=
- GL_COND_LIBTOOL_FALSE='#'
-else
- GL_COND_LIBTOOL_TRUE='#'
- GL_COND_LIBTOOL_FALSE=
-fi
-
- gl_cond_libtool=false
- gl_libdeps=
- gl_ltlibdeps=
- gl_m4_base='m4'
-
-
-
-
-
-
-
-
-
- gl_source_base='lib'
-
- :
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define GNULIB_CLOSE_STREAM 1
-_ACEOF
-
-
-
- :
-
-
- if test "x$datarootdir" = x; then
- datarootdir='${datadir}'
-
- fi
- if test "x$docdir" = x; then
- docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-
- fi
- if test "x$htmldir" = x; then
- htmldir='${docdir}'
-
- fi
- if test "x$dvidir" = x; then
- dvidir='${docdir}'
-
- fi
- if test "x$pdfdir" = x; then
- pdfdir='${docdir}'
-
- fi
- if test "x$psdir" = x; then
- psdir='${docdir}'
-
- fi
- if test "x$lispdir" = x; then
- lispdir='${datarootdir}/emacs/site-lisp'
-
- fi
- if test "x$localedir" = x; then
- localedir='${datarootdir}/locale'
-
- fi
-
- pkglibexecdir='${libexecdir}/${PACKAGE}'
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for error_at_line" >&5
-$as_echo_n "checking for error_at_line... " >&6; }
-if ${ac_cv_lib_error_at_line+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <error.h>
-int
-main ()
-{
-error_at_line (0, 0, "", 0, "an error occurred");
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_error_at_line=yes
-else
- ac_cv_lib_error_at_line=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_error_at_line" >&5
-$as_echo "$ac_cv_lib_error_at_line" >&6; }
-
-if test $ac_cv_lib_error_at_line = no; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS error.$ac_objext"
-
-
-
-
- :
-
-fi
-
-
- XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS --flag=error:3:c-format"
-
-
-
- XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS --flag=error_at_line:5:c-format"
-
-
-
-
- fp_headers='
-# include <stdio.h>
-# if HAVE_STDIO_EXT_H
-# include <stdio_ext.h>
-# endif
-'
- ac_fn_c_check_decl "$LINENO" "__fpending" "ac_cv_have_decl___fpending" "$fp_headers
-"
-if test "x$ac_cv_have_decl___fpending" = xyes; then :
- ac_have_decl=1
-else
- ac_have_decl=0
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL___FPENDING $ac_have_decl
-_ACEOF
-
-
-if test $ac_cv_func___fpending = no; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS fpending.$ac_objext"
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to determine the number of pending output bytes on a stream" >&5
-$as_echo_n "checking how to determine the number of pending output bytes on a stream... " >&6; }
-if ${ac_cv_sys_pending_output_n_bytes+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- for ac_expr in \
- \
- '# glibc2' \
- 'fp->_IO_write_ptr - fp->_IO_write_base' \
- \
- '# traditional Unix' \
- 'fp->_ptr - fp->_base' \
- \
- '# BSD' \
- 'fp->_p - fp->_bf._base' \
- \
- '# SCO, Unixware' \
- '(fp->__ptr ? fp->__ptr - fp->__base : 0)' \
- \
- '# QNX' \
- '(fp->_Mode & 0x2000 /*_MWRITE*/ ? fp->_Next - fp->_Buf : 0)' \
- \
- '# old glibc?' \
- 'fp->__bufp - fp->__buffer' \
- \
- '# old glibc iostream?' \
- 'fp->_pptr - fp->_pbase' \
- \
- '# emx+gcc' \
- 'fp->_ptr - fp->_buffer' \
- \
- '# Minix' \
- 'fp->_ptr - fp->_buf' \
- \
- '# Plan9' \
- 'fp->wp - fp->buf' \
- \
- '# VMS' \
- '(*fp)->_ptr - (*fp)->_base' \
- \
- '# e.g., DGUX R4.11; the info is not available' \
- 1 \
- ; do
-
- # Skip each embedded comment.
- case "$ac_expr" in '#'*) continue;; esac
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdio.h>
-int
-main ()
-{
-FILE *fp = stdin; (void) ($ac_expr);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- fp_done=yes
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$fp_done" = yes && break
- done
-
- ac_cv_sys_pending_output_n_bytes=$ac_expr
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_pending_output_n_bytes" >&5
-$as_echo "$ac_cv_sys_pending_output_n_bytes" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define PENDING_OUTPUT_N_BYTES $ac_cv_sys_pending_output_n_bytes
-_ACEOF
-
-
-fi
-
-
-
-
-
-if test $REPLACE_GETOPT = 1; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS getopt.$ac_objext"
-
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS getopt1.$ac_objext"
-
-
-
-
- GNULIB_GL_UNISTD_H_GETOPT=1
-fi
-
-
-
-$as_echo "#define GNULIB_TEST_GETOPT_GNU 1" >>confdefs.h
-
-
-
-
-
-
- REPLACE_GETOPT=0
-
-
- if test -n "$gl_replace_getopt"; then :
-
- REPLACE_GETOPT=1
-
-fi
-
-
- if test $REPLACE_GETOPT = 1; then
-
- GETOPT_H=getopt.h
-
-$as_echo "#define __GETOPT_PREFIX rpl_" >>confdefs.h
-
-
-
- fi
-
-if test $REPLACE_GETOPT = 1; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS getopt.$ac_objext"
-
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS getopt1.$ac_objext"
-
-
-
-
- GNULIB_GL_UNISTD_H_GETOPT=1
-fi
-
-
-
-
-# Autoconf 2.61a.99 and earlier don't support linking a file only
-# in VPATH builds. But since GNUmakefile is for maintainer use
-# only, it does not matter if we skip the link with older autoconf.
-# Automake 1.10.1 and earlier try to remove GNUmakefile in non-VPATH
-# builds, so use a shell variable to bypass this.
-GNUmakefile=GNUmakefile
-ac_config_links="$ac_config_links $GNUmakefile:$GNUmakefile"
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler generally respects inline" >&5
-$as_echo_n "checking whether the compiler generally respects inline... " >&6; }
-if ${gl_cv_c_inline_effective+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test $ac_cv_c_inline = no; then
- gl_cv_c_inline_effective=no
- else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifdef __NO_INLINE__
- #error "inline is not effective"
- #endif
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gl_cv_c_inline_effective=yes
-else
- gl_cv_c_inline_effective=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_c_inline_effective" >&5
-$as_echo "$gl_cv_c_inline_effective" >&6; }
- if test $gl_cv_c_inline_effective = yes; then
-
-$as_echo "#define HAVE_INLINE 1" >>confdefs.h
-
- fi
-
-
-
-
-
-
-
-
-
-LOCALCHARSET_TESTS_ENVIRONMENT="CHARSETALIASDIR=\"\$(abs_top_builddir)/$gl_source_base\""
-
-
-
-
-
-
-
-
-
-
-
-
- if test $ac_cv_func_mbsinit = yes && test $ac_cv_func_mbrtowc = yes; then
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc handles incomplete characters" >&5
-$as_echo_n "checking whether mbrtowc handles incomplete characters... " >&6; }
-if ${gl_cv_func_mbrtowc_incomplete_state+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- case "$host_os" in
- # Guess no on AIX and OSF/1.
- aix* | osf*) gl_cv_func_mbrtowc_incomplete_state="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_incomplete_state="guessing yes" ;;
- esac
- if test $LOCALE_JA != none; then
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- if (setlocale (LC_ALL, "$LOCALE_JA") != NULL)
- {
- const char input[] = "B\217\253\344\217\251\316er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 1, 1, &state) == (size_t)(-2))
- if (mbsinit (&state))
- return 1;
- }
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_mbrtowc_incomplete_state=yes
-else
- gl_cv_func_mbrtowc_incomplete_state=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_mbrtowc_incomplete_state" >&5
-$as_echo "$gl_cv_func_mbrtowc_incomplete_state" >&6; }
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc works as well as mbtowc" >&5
-$as_echo_n "checking whether mbrtowc works as well as mbtowc... " >&6; }
-if ${gl_cv_func_mbrtowc_sanitycheck+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- case "$host_os" in
- # Guess no on Solaris 8.
- solaris2.8) gl_cv_func_mbrtowc_sanitycheck="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_sanitycheck="guessing yes" ;;
- esac
- if test $LOCALE_ZH_CN != none; then
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <stdlib.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- /* This fails on Solaris 8:
- mbrtowc returns 2, and sets wc to 0x00F0.
- mbtowc returns 4 (correct) and sets wc to 0x5EDC. */
- if (setlocale (LC_ALL, "$LOCALE_ZH_CN") != NULL)
- {
- char input[] = "B\250\271\201\060\211\070er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 3, 6, &state) != 4
- && mbtowc (&wc, input + 3, 6) == 4)
- return 1;
- }
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_mbrtowc_sanitycheck=yes
-else
- gl_cv_func_mbrtowc_sanitycheck=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_mbrtowc_sanitycheck" >&5
-$as_echo "$gl_cv_func_mbrtowc_sanitycheck" >&6; }
-
- REPLACE_MBSTATE_T=0
- case "$gl_cv_func_mbrtowc_incomplete_state" in
- *yes) ;;
- *) REPLACE_MBSTATE_T=1 ;;
- esac
- case "$gl_cv_func_mbrtowc_sanitycheck" in
- *yes) ;;
- *) REPLACE_MBSTATE_T=1 ;;
- esac
- else
- REPLACE_MBSTATE_T=1
- fi
-
-
-
- if test $ac_cv_func_mbrtowc = no; then
- HAVE_MBRTOWC=0
- ac_fn_c_check_decl "$LINENO" "mbrtowc" "ac_cv_have_decl_mbrtowc" "
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-
-"
-if test "x$ac_cv_have_decl_mbrtowc" = xyes; then :
- ac_have_decl=1
-else
- ac_have_decl=0
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_MBRTOWC $ac_have_decl
-_ACEOF
-
- if test $ac_cv_have_decl_mbrtowc = yes; then
- REPLACE_MBRTOWC=1
- fi
- else
- if test $REPLACE_MBSTATE_T = 1; then
- REPLACE_MBRTOWC=1
- else
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc handles a NULL pwc argument" >&5
-$as_echo_n "checking whether mbrtowc handles a NULL pwc argument... " >&6; }
-if ${gl_cv_func_mbrtowc_null_arg1+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- case "$host_os" in
- # Guess no on Solaris.
- solaris*) gl_cv_func_mbrtowc_null_arg1="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_null_arg1="guessing yes" ;;
- esac
- if test $LOCALE_FR_UTF8 != none; then
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <stdlib.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- int result = 0;
-
- if (setlocale (LC_ALL, "$LOCALE_FR_UTF8") != NULL)
- {
- char input[] = "\303\237er";
- mbstate_t state;
- wchar_t wc;
- size_t ret;
-
- memset (&state, '\0', sizeof (mbstate_t));
- wc = (wchar_t) 0xBADFACE;
- ret = mbrtowc (&wc, input, 5, &state);
- if (ret != 2)
- result |= 1;
- if (!mbsinit (&state))
- result |= 2;
-
- memset (&state, '\0', sizeof (mbstate_t));
- ret = mbrtowc (NULL, input, 5, &state);
- if (ret != 2) /* Solaris 7 fails here: ret is -1. */
- result |= 4;
- if (!mbsinit (&state))
- result |= 8;
- }
- return result;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_mbrtowc_null_arg1=yes
-else
- gl_cv_func_mbrtowc_null_arg1=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_mbrtowc_null_arg1" >&5
-$as_echo "$gl_cv_func_mbrtowc_null_arg1" >&6; }
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc handles a NULL string argument" >&5
-$as_echo_n "checking whether mbrtowc handles a NULL string argument... " >&6; }
-if ${gl_cv_func_mbrtowc_null_arg2+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- case "$host_os" in
- # Guess no on OSF/1.
- osf*) gl_cv_func_mbrtowc_null_arg2="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_null_arg2="guessing yes" ;;
- esac
- if test $LOCALE_FR_UTF8 != none; then
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- if (setlocale (LC_ALL, "$LOCALE_FR_UTF8") != NULL)
- {
- mbstate_t state;
- wchar_t wc;
- int ret;
-
- memset (&state, '\0', sizeof (mbstate_t));
- wc = (wchar_t) 0xBADFACE;
- mbrtowc (&wc, NULL, 5, &state);
- /* Check that wc was not modified. */
- if (wc != (wchar_t) 0xBADFACE)
- return 1;
- }
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_mbrtowc_null_arg2=yes
-else
- gl_cv_func_mbrtowc_null_arg2=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_mbrtowc_null_arg2" >&5
-$as_echo "$gl_cv_func_mbrtowc_null_arg2" >&6; }
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc has a correct return value" >&5
-$as_echo_n "checking whether mbrtowc has a correct return value... " >&6; }
-if ${gl_cv_func_mbrtowc_retval+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- case "$host_os" in
- # Guess no on HP-UX, Solaris, native Windows.
- hpux* | solaris* | mingw*) gl_cv_func_mbrtowc_retval="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_retval="guessing yes" ;;
- esac
- if test $LOCALE_FR_UTF8 != none || test $LOCALE_JA != none \
- || { case "$host_os" in mingw*) true;; *) false;; esac; }; then
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- int result = 0;
- int found_some_locale = 0;
- /* This fails on Solaris. */
- if (setlocale (LC_ALL, "$LOCALE_FR_UTF8") != NULL)
- {
- char input[] = "B\303\274\303\237er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 1, 1, &state) == (size_t)(-2))
- {
- input[1] = '\0';
- if (mbrtowc (&wc, input + 2, 5, &state) != 1)
- result |= 1;
- }
- found_some_locale = 1;
- }
- /* This fails on HP-UX 11.11. */
- if (setlocale (LC_ALL, "$LOCALE_JA") != NULL)
- {
- char input[] = "B\217\253\344\217\251\316er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 1, 1, &state) == (size_t)(-2))
- {
- input[1] = '\0';
- if (mbrtowc (&wc, input + 2, 5, &state) != 2)
- result |= 2;
- }
- found_some_locale = 1;
- }
- /* This fails on native Windows. */
- if (setlocale (LC_ALL, "Japanese_Japan.932") != NULL)
- {
- char input[] = "<\223\372\226\173\214\352>"; /* "<日本語>" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 3, 1, &state) == (size_t)(-2))
- {
- input[3] = '\0';
- if (mbrtowc (&wc, input + 4, 4, &state) != 1)
- result |= 4;
- }
- found_some_locale = 1;
- }
- if (setlocale (LC_ALL, "Chinese_Taiwan.950") != NULL)
- {
- char input[] = "<\244\351\245\273\273\171>"; /* "<日本語>" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 3, 1, &state) == (size_t)(-2))
- {
- input[3] = '\0';
- if (mbrtowc (&wc, input + 4, 4, &state) != 1)
- result |= 8;
- }
- found_some_locale = 1;
- }
- if (setlocale (LC_ALL, "Chinese_China.936") != NULL)
- {
- char input[] = "<\310\325\261\276\325\132>"; /* "<日本語>" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 3, 1, &state) == (size_t)(-2))
- {
- input[3] = '\0';
- if (mbrtowc (&wc, input + 4, 4, &state) != 1)
- result |= 16;
- }
- found_some_locale = 1;
- }
- return (found_some_locale ? result : 77);
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_mbrtowc_retval=yes
-else
- if test $? != 77; then
- gl_cv_func_mbrtowc_retval=no
- fi
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_mbrtowc_retval" >&5
-$as_echo "$gl_cv_func_mbrtowc_retval" >&6; }
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc returns 0 when parsing a NUL character" >&5
-$as_echo_n "checking whether mbrtowc returns 0 when parsing a NUL character... " >&6; }
-if ${gl_cv_func_mbrtowc_nul_retval+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- case "$host_os" in
- # Guess no on Solaris 8 and 9.
- solaris2.[89]) gl_cv_func_mbrtowc_nul_retval="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_nul_retval="guessing yes" ;;
- esac
- if test $LOCALE_ZH_CN != none; then
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- /* This fails on Solaris 8 and 9. */
- if (setlocale (LC_ALL, "$LOCALE_ZH_CN") != NULL)
- {
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, "", 1, &state) != 0)
- return 1;
- }
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_mbrtowc_nul_retval=yes
-else
- gl_cv_func_mbrtowc_nul_retval=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_mbrtowc_nul_retval" >&5
-$as_echo "$gl_cv_func_mbrtowc_nul_retval" >&6; }
-
- case "$gl_cv_func_mbrtowc_null_arg1" in
- *yes) ;;
- *)
-$as_echo "#define MBRTOWC_NULL_ARG1_BUG 1" >>confdefs.h
-
- REPLACE_MBRTOWC=1
- ;;
- esac
- case "$gl_cv_func_mbrtowc_null_arg2" in
- *yes) ;;
- *)
-$as_echo "#define MBRTOWC_NULL_ARG2_BUG 1" >>confdefs.h
-
- REPLACE_MBRTOWC=1
- ;;
- esac
- case "$gl_cv_func_mbrtowc_retval" in
- *yes) ;;
- *)
-$as_echo "#define MBRTOWC_RETVAL_BUG 1" >>confdefs.h
-
- REPLACE_MBRTOWC=1
- ;;
- esac
- case "$gl_cv_func_mbrtowc_nul_retval" in
- *yes) ;;
- *)
-$as_echo "#define MBRTOWC_NUL_RETVAL_BUG 1" >>confdefs.h
-
- REPLACE_MBRTOWC=1
- ;;
- esac
- fi
- fi
-
-if test $HAVE_MBRTOWC = 0 || test $REPLACE_MBRTOWC = 1; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS mbrtowc.$ac_objext"
-
-
- :
-
-fi
-
-
-
-
-
- GNULIB_MBRTOWC=1
-
-
-
-
-
-$as_echo "#define GNULIB_TEST_MBRTOWC 1" >>confdefs.h
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- if test $ac_cv_func_mbsinit = yes && test $ac_cv_func_mbrtowc = yes; then
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc handles incomplete characters" >&5
-$as_echo_n "checking whether mbrtowc handles incomplete characters... " >&6; }
-if ${gl_cv_func_mbrtowc_incomplete_state+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- case "$host_os" in
- # Guess no on AIX and OSF/1.
- aix* | osf*) gl_cv_func_mbrtowc_incomplete_state="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_incomplete_state="guessing yes" ;;
- esac
- if test $LOCALE_JA != none; then
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- if (setlocale (LC_ALL, "$LOCALE_JA") != NULL)
- {
- const char input[] = "B\217\253\344\217\251\316er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 1, 1, &state) == (size_t)(-2))
- if (mbsinit (&state))
- return 1;
- }
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_mbrtowc_incomplete_state=yes
-else
- gl_cv_func_mbrtowc_incomplete_state=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_mbrtowc_incomplete_state" >&5
-$as_echo "$gl_cv_func_mbrtowc_incomplete_state" >&6; }
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc works as well as mbtowc" >&5
-$as_echo_n "checking whether mbrtowc works as well as mbtowc... " >&6; }
-if ${gl_cv_func_mbrtowc_sanitycheck+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- case "$host_os" in
- # Guess no on Solaris 8.
- solaris2.8) gl_cv_func_mbrtowc_sanitycheck="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_sanitycheck="guessing yes" ;;
- esac
- if test $LOCALE_ZH_CN != none; then
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <locale.h>
-#include <stdlib.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- /* This fails on Solaris 8:
- mbrtowc returns 2, and sets wc to 0x00F0.
- mbtowc returns 4 (correct) and sets wc to 0x5EDC. */
- if (setlocale (LC_ALL, "$LOCALE_ZH_CN") != NULL)
- {
- char input[] = "B\250\271\201\060\211\070er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 3, 6, &state) != 4
- && mbtowc (&wc, input + 3, 6) == 4)
- return 1;
- }
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_mbrtowc_sanitycheck=yes
-else
- gl_cv_func_mbrtowc_sanitycheck=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_mbrtowc_sanitycheck" >&5
-$as_echo "$gl_cv_func_mbrtowc_sanitycheck" >&6; }
-
- REPLACE_MBSTATE_T=0
- case "$gl_cv_func_mbrtowc_incomplete_state" in
- *yes) ;;
- *) REPLACE_MBSTATE_T=1 ;;
- esac
- case "$gl_cv_func_mbrtowc_sanitycheck" in
- *yes) ;;
- *) REPLACE_MBSTATE_T=1 ;;
- esac
- else
- REPLACE_MBSTATE_T=1
- fi
-
-
-
- if test $ac_cv_func_mbsinit = no; then
- HAVE_MBSINIT=0
- ac_fn_c_check_decl "$LINENO" "mbsinit" "ac_cv_have_decl_mbsinit" "
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-
-"
-if test "x$ac_cv_have_decl_mbsinit" = xyes; then :
- ac_have_decl=1
-else
- ac_have_decl=0
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_MBSINIT $ac_have_decl
-_ACEOF
-
- if test $ac_cv_have_decl_mbsinit = yes; then
- REPLACE_MBSINIT=1
- fi
- else
- if test $REPLACE_MBSTATE_T = 1; then
- REPLACE_MBSINIT=1
- else
- case "$host_os" in
- mingw*) REPLACE_MBSINIT=1 ;;
- esac
- fi
- fi
-
-if test $HAVE_MBSINIT = 0 || test $REPLACE_MBSINIT = 1; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS mbsinit.$ac_objext"
-
-
- :
-
-fi
-
-
-
-
-
- GNULIB_MBSINIT=1
-
-
-
-
-
-$as_echo "#define GNULIB_TEST_MBSINIT 1" >>confdefs.h
-
-
-
-
-
- if test $ac_cv_func__set_invalid_parameter_handler = yes; then
- HAVE_MSVC_INVALID_PARAMETER_HANDLER=1
-
-$as_echo "#define HAVE_MSVC_INVALID_PARAMETER_HANDLER 1" >>confdefs.h
-
- else
- HAVE_MSVC_INVALID_PARAMETER_HANDLER=0
- fi
-
-
-if test $HAVE_MSVC_INVALID_PARAMETER_HANDLER = 1; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS msvc-inval.$ac_objext"
-
-fi
-
-
-
-if test $HAVE_MSVC_INVALID_PARAMETER_HANDLER = 1; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS msvc-nothrow.$ac_objext"
-
-fi
-ac_fn_c_check_decl "$LINENO" "program_invocation_name" "ac_cv_have_decl_program_invocation_name" "#include <errno.h>
-"
-if test "x$ac_cv_have_decl_program_invocation_name" = xyes; then :
- ac_have_decl=1
-else
- ac_have_decl=0
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_PROGRAM_INVOCATION_NAME $ac_have_decl
-_ACEOF
-
-ac_fn_c_check_decl "$LINENO" "program_invocation_short_name" "ac_cv_have_decl_program_invocation_short_name" "#include <errno.h>
-"
-if test "x$ac_cv_have_decl_program_invocation_short_name" = xyes; then :
- ac_have_decl=1
-else
- ac_have_decl=0
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_PROGRAM_INVOCATION_SHORT_NAME $ac_have_decl
-_ACEOF
-
-
- :
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ssize_t" >&5
-$as_echo_n "checking for ssize_t... " >&6; }
-if ${gt_cv_ssize_t+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
-int
-main ()
-{
-int x = sizeof (ssize_t *) + sizeof (ssize_t);
- return !x;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gt_cv_ssize_t=yes
-else
- gt_cv_ssize_t=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_ssize_t" >&5
-$as_echo "$gt_cv_ssize_t" >&6; }
- if test $gt_cv_ssize_t = no; then
-
-$as_echo "#define ssize_t int" >>confdefs.h
-
- fi
-
-
-
-
- # Define two additional variables used in the Makefile substitution.
-
- if test "$ac_cv_header_stdbool_h" = yes; then
- STDBOOL_H=''
- else
- STDBOOL_H='stdbool.h'
- fi
-
- if test -n "$STDBOOL_H"; then
- GL_GENERATE_STDBOOL_H_TRUE=
- GL_GENERATE_STDBOOL_H_FALSE='#'
-else
- GL_GENERATE_STDBOOL_H_TRUE='#'
- GL_GENERATE_STDBOOL_H_FALSE=
-fi
-
-
- if test "$ac_cv_type__Bool" = yes; then
- HAVE__BOOL=1
- else
- HAVE__BOOL=0
- fi
-
-
-
-
-
- STDDEF_H=
- if test $gt_cv_c_wchar_t = no; then
- HAVE_WCHAR_T=0
- STDDEF_H=stddef.h
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NULL can be used in arbitrary expressions" >&5
-$as_echo_n "checking whether NULL can be used in arbitrary expressions... " >&6; }
-if ${gl_cv_decl_null_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stddef.h>
- int test[2 * (sizeof NULL == sizeof (void *)) -1];
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gl_cv_decl_null_works=yes
-else
- gl_cv_decl_null_works=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_decl_null_works" >&5
-$as_echo "$gl_cv_decl_null_works" >&6; }
- if test $gl_cv_decl_null_works = no; then
- REPLACE_NULL=1
- STDDEF_H=stddef.h
- fi
-
- if test -n "$STDDEF_H"; then
- GL_GENERATE_STDDEF_H_TRUE=
- GL_GENERATE_STDDEF_H_FALSE='#'
-else
- GL_GENERATE_STDDEF_H_TRUE='#'
- GL_GENERATE_STDDEF_H_FALSE=
-fi
-
- if test -n "$STDDEF_H"; then
-
-
-
-
-
-
-
-
- if test $gl_cv_have_include_next = yes; then
- gl_cv_next_stddef_h='<'stddef.h'>'
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking absolute name of <stddef.h>" >&5
-$as_echo_n "checking absolute name of <stddef.h>... " >&6; }
-if ${gl_cv_next_stddef_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stddef.h>
-
-_ACEOF
- case "$host_os" in
- aix*) gl_absname_cpp="$ac_cpp -C" ;;
- *) gl_absname_cpp="$ac_cpp" ;;
- esac
-
- case "$host_os" in
- mingw*)
- gl_dirsep_regex='[/\\]'
- ;;
- *)
- gl_dirsep_regex='\/'
- ;;
- esac
- gl_make_literal_regex_sed='s,[]$^\\.*/[],\\&,g'
-
- gl_header_literal_regex=`echo 'stddef.h' \
- | sed -e "$gl_make_literal_regex_sed"`
- gl_absolute_header_sed="/${gl_dirsep_regex}${gl_header_literal_regex}/"'{
- s/.*"\(.*'"${gl_dirsep_regex}${gl_header_literal_regex}"'\)".*/\1/
- s|^/[^/]|//&|
- p
- q
- }'
- gl_cv_next_stddef_h='"'`(eval "$gl_absname_cpp conftest.$ac_ext") 2>&5 |
- sed -n "$gl_absolute_header_sed"`'"'
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_next_stddef_h" >&5
-$as_echo "$gl_cv_next_stddef_h" >&6; }
- fi
- NEXT_STDDEF_H=$gl_cv_next_stddef_h
-
- if test $gl_cv_have_include_next = yes || test $gl_cv_have_include_next = buggy; then
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next'
- gl_next_as_first_directive='<'stddef.h'>'
- else
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include'
- gl_next_as_first_directive=$gl_cv_next_stddef_h
- fi
- NEXT_AS_FIRST_DIRECTIVE_STDDEF_H=$gl_next_as_first_directive
-
-
-
-
- fi
-
-
-
-
-
-
-
-
-
-
-
- if test $gl_cv_have_include_next = yes; then
- gl_cv_next_stdlib_h='<'stdlib.h'>'
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking absolute name of <stdlib.h>" >&5
-$as_echo_n "checking absolute name of <stdlib.h>... " >&6; }
-if ${gl_cv_next_stdlib_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
- case "$host_os" in
- aix*) gl_absname_cpp="$ac_cpp -C" ;;
- *) gl_absname_cpp="$ac_cpp" ;;
- esac
-
- case "$host_os" in
- mingw*)
- gl_dirsep_regex='[/\\]'
- ;;
- *)
- gl_dirsep_regex='\/'
- ;;
- esac
- gl_make_literal_regex_sed='s,[]$^\\.*/[],\\&,g'
-
- gl_header_literal_regex=`echo 'stdlib.h' \
- | sed -e "$gl_make_literal_regex_sed"`
- gl_absolute_header_sed="/${gl_dirsep_regex}${gl_header_literal_regex}/"'{
- s/.*"\(.*'"${gl_dirsep_regex}${gl_header_literal_regex}"'\)".*/\1/
- s|^/[^/]|//&|
- p
- q
- }'
- gl_cv_next_stdlib_h='"'`(eval "$gl_absname_cpp conftest.$ac_ext") 2>&5 |
- sed -n "$gl_absolute_header_sed"`'"'
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_next_stdlib_h" >&5
-$as_echo "$gl_cv_next_stdlib_h" >&6; }
- fi
- NEXT_STDLIB_H=$gl_cv_next_stdlib_h
-
- if test $gl_cv_have_include_next = yes || test $gl_cv_have_include_next = buggy; then
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next'
- gl_next_as_first_directive='<'stdlib.h'>'
- else
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include'
- gl_next_as_first_directive=$gl_cv_next_stdlib_h
- fi
- NEXT_AS_FIRST_DIRECTIVE_STDLIB_H=$gl_next_as_first_directive
-
-
-
-
-
-
- for gl_func in _Exit atoll canonicalize_file_name getloadavg getsubopt grantpt initstate initstate_r mkdtemp mkostemp mkostemps mkstemp mkstemps posix_openpt ptsname ptsname_r random random_r realpath rpmatch setenv setstate setstate_r srandom srandom_r strtod strtoll strtoull unlockpt unsetenv; do
- as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5
-$as_echo_n "checking whether $gl_func is declared without a macro... " >&6; }
-if eval \${$as_gl_Symbol+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#if HAVE_SYS_LOADAVG_H
-# include <sys/loadavg.h>
-#endif
-#if HAVE_RANDOM_H
-# include <random.h>
-#endif
-
-int
-main ()
-{
-#undef $gl_func
- (void) $gl_func;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$as_gl_Symbol=yes"
-else
- eval "$as_gl_Symbol=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$as_gl_Symbol
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- if eval test \"x\$"$as_gl_Symbol"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1
-_ACEOF
-
- eval ac_cv_have_decl_$gl_func=yes
-fi
- done
-
-
-
-
-
-
-
- if test "$ERRNO_H:$REPLACE_STRERROR_0" = :0; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strerror function" >&5
-$as_echo_n "checking for working strerror function... " >&6; }
-if ${gl_cv_func_working_strerror+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- gl_cv_func_working_strerror="guessing no"
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-
-int
-main ()
-{
-if (!*strerror (-2)) return 1;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_working_strerror=yes
-else
- gl_cv_func_working_strerror=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_working_strerror" >&5
-$as_echo "$gl_cv_func_working_strerror" >&6; }
- if test "$gl_cv_func_working_strerror" != yes; then
- REPLACE_STRERROR=1
- fi
-
- else
- REPLACE_STRERROR=1
- fi
-
-if test $REPLACE_STRERROR = 1; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS strerror.$ac_objext"
-
-fi
-
-
-cat >>confdefs.h <<_ACEOF
-#define GNULIB_STRERROR 1
-_ACEOF
-
-
-
-
-
-
-
- GNULIB_STRERROR=1
-
-
-
-
-
-$as_echo "#define GNULIB_TEST_STRERROR 1" >>confdefs.h
-
-
-
-
-
-if test -n "$ERRNO_H" || test $REPLACE_STRERROR_0 = 1; then
-
-
-
-
-
-
-
-
- gl_LIBOBJS="$gl_LIBOBJS strerror-override.$ac_objext"
-
-
-
-
-
- if test $ac_cv_header_sys_socket_h != yes; then
- for ac_header in winsock2.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "winsock2.h" "ac_cv_header_winsock2_h" "$ac_includes_default"
-if test "x$ac_cv_header_winsock2_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_WINSOCK2_H 1
-_ACEOF
-
-fi
-
-done
-
- fi
- if test "$ac_cv_header_winsock2_h" = yes; then
- HAVE_WINSOCK2_H=1
- UNISTD_H_HAVE_WINSOCK2_H=1
- SYS_IOCTL_H_HAVE_WINSOCK2_H=1
- else
- HAVE_WINSOCK2_H=0
- fi
-
-
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- if test $gl_cv_have_include_next = yes; then
- gl_cv_next_unistd_h='<'unistd.h'>'
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking absolute name of <unistd.h>" >&5
-$as_echo_n "checking absolute name of <unistd.h>... " >&6; }
-if ${gl_cv_next_unistd_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- if test $ac_cv_header_unistd_h = yes; then
-
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <unistd.h>
-
-_ACEOF
- case "$host_os" in
- aix*) gl_absname_cpp="$ac_cpp -C" ;;
- *) gl_absname_cpp="$ac_cpp" ;;
- esac
-
- case "$host_os" in
- mingw*)
- gl_dirsep_regex='[/\\]'
- ;;
- *)
- gl_dirsep_regex='\/'
- ;;
- esac
- gl_make_literal_regex_sed='s,[]$^\\.*/[],\\&,g'
-
- gl_header_literal_regex=`echo 'unistd.h' \
- | sed -e "$gl_make_literal_regex_sed"`
- gl_absolute_header_sed="/${gl_dirsep_regex}${gl_header_literal_regex}/"'{
- s/.*"\(.*'"${gl_dirsep_regex}${gl_header_literal_regex}"'\)".*/\1/
- s|^/[^/]|//&|
- p
- q
- }'
- gl_cv_next_unistd_h='"'`(eval "$gl_absname_cpp conftest.$ac_ext") 2>&5 |
- sed -n "$gl_absolute_header_sed"`'"'
- else
- gl_cv_next_unistd_h='<'unistd.h'>'
- fi
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_next_unistd_h" >&5
-$as_echo "$gl_cv_next_unistd_h" >&6; }
- fi
- NEXT_UNISTD_H=$gl_cv_next_unistd_h
-
- if test $gl_cv_have_include_next = yes || test $gl_cv_have_include_next = buggy; then
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next'
- gl_next_as_first_directive='<'unistd.h'>'
- else
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include'
- gl_next_as_first_directive=$gl_cv_next_unistd_h
- fi
- NEXT_AS_FIRST_DIRECTIVE_UNISTD_H=$gl_next_as_first_directive
-
-
-
-
- if test $ac_cv_header_unistd_h = yes; then
- HAVE_UNISTD_H=1
- else
- HAVE_UNISTD_H=0
- fi
-
-
-
-
-
- for gl_func in chdir chown dup dup2 dup3 environ euidaccess faccessat fchdir fchownat fdatasync fsync ftruncate getcwd getdomainname getdtablesize getgroups gethostname getlogin getlogin_r getpagesize getusershell setusershell endusershell group_member isatty lchown link linkat lseek pipe pipe2 pread pwrite readlink readlinkat rmdir sethostname sleep symlink symlinkat ttyname_r unlink unlinkat usleep; do
- as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5
-$as_echo_n "checking whether $gl_func is declared without a macro... " >&6; }
-if eval \${$as_gl_Symbol+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-/* Some systems declare various items in the wrong headers. */
-#if !(defined __GLIBC__ && !defined __UCLIBC__)
-# include <fcntl.h>
-# include <stdio.h>
-# include <stdlib.h>
-# if (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
-# include <io.h>
-# endif
-#endif
-
-int
-main ()
-{
-#undef $gl_func
- (void) $gl_func;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$as_gl_Symbol=yes"
-else
- eval "$as_gl_Symbol=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$as_gl_Symbol
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- if eval test \"x\$"$as_gl_Symbol"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1
-_ACEOF
-
- eval ac_cv_have_decl_$gl_func=yes
-fi
- done
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- if test $gl_cv_have_include_next = yes; then
- gl_cv_next_wchar_h='<'wchar.h'>'
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking absolute name of <wchar.h>" >&5
-$as_echo_n "checking absolute name of <wchar.h>... " >&6; }
-if ${gl_cv_next_wchar_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- if test $ac_cv_header_wchar_h = yes; then
-
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <wchar.h>
-
-_ACEOF
- case "$host_os" in
- aix*) gl_absname_cpp="$ac_cpp -C" ;;
- *) gl_absname_cpp="$ac_cpp" ;;
- esac
-
- case "$host_os" in
- mingw*)
- gl_dirsep_regex='[/\\]'
- ;;
- *)
- gl_dirsep_regex='\/'
- ;;
- esac
- gl_make_literal_regex_sed='s,[]$^\\.*/[],\\&,g'
-
- gl_header_literal_regex=`echo 'wchar.h' \
- | sed -e "$gl_make_literal_regex_sed"`
- gl_absolute_header_sed="/${gl_dirsep_regex}${gl_header_literal_regex}/"'{
- s/.*"\(.*'"${gl_dirsep_regex}${gl_header_literal_regex}"'\)".*/\1/
- s|^/[^/]|//&|
- p
- q
- }'
- gl_cv_next_wchar_h='"'`(eval "$gl_absname_cpp conftest.$ac_ext") 2>&5 |
- sed -n "$gl_absolute_header_sed"`'"'
- else
- gl_cv_next_wchar_h='<'wchar.h'>'
- fi
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_next_wchar_h" >&5
-$as_echo "$gl_cv_next_wchar_h" >&6; }
- fi
- NEXT_WCHAR_H=$gl_cv_next_wchar_h
-
- if test $gl_cv_have_include_next = yes || test $gl_cv_have_include_next = buggy; then
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next'
- gl_next_as_first_directive='<'wchar.h'>'
- else
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include'
- gl_next_as_first_directive=$gl_cv_next_wchar_h
- fi
- NEXT_AS_FIRST_DIRECTIVE_WCHAR_H=$gl_next_as_first_directive
-
-
-
-
- if test $ac_cv_header_wchar_h = yes; then
- HAVE_WCHAR_H=1
- else
- HAVE_WCHAR_H=0
- fi
-
-
-
-
-
- if test $gt_cv_c_wint_t = yes; then
- HAVE_WINT_T=1
- else
- HAVE_WINT_T=0
- fi
-
-
-
- for gl_func in btowc wctob mbsinit mbrtowc mbrlen mbsrtowcs mbsnrtowcs wcrtomb wcsrtombs wcsnrtombs wcwidth wmemchr wmemcmp wmemcpy wmemmove wmemset wcslen wcsnlen wcscpy wcpcpy wcsncpy wcpncpy wcscat wcsncat wcscmp wcsncmp wcscasecmp wcsncasecmp wcscoll wcsxfrm wcsdup wcschr wcsrchr wcscspn wcsspn wcspbrk wcsstr wcstok wcswidth ; do
- as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5
-$as_echo_n "checking whether $gl_func is declared without a macro... " >&6; }
-if eval \${$as_gl_Symbol+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#if !(defined __GLIBC__ && !defined __UCLIBC__)
-# include <stddef.h>
-# include <stdio.h>
-# include <time.h>
-#endif
-#include <wchar.h>
-
-int
-main ()
-{
-#undef $gl_func
- (void) $gl_func;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$as_gl_Symbol=yes"
-else
- eval "$as_gl_Symbol=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$as_gl_Symbol
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- if eval test \"x\$"$as_gl_Symbol"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1
-_ACEOF
-
- eval ac_cv_have_decl_$gl_func=yes
-fi
- done
-
-
-
-
-
-
-
- if test $ac_cv_func_iswcntrl = yes; then
- HAVE_ISWCNTRL=1
- else
- HAVE_ISWCNTRL=0
- fi
-
-
-
-
-
- if test $gt_cv_c_wint_t = yes; then
- HAVE_WINT_T=1
- else
- HAVE_WINT_T=0
- fi
-
-
-
-
-
-
-
-
-
-
-
- if test $gl_cv_have_include_next = yes; then
- gl_cv_next_wctype_h='<'wctype.h'>'
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking absolute name of <wctype.h>" >&5
-$as_echo_n "checking absolute name of <wctype.h>... " >&6; }
-if ${gl_cv_next_wctype_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- if test $ac_cv_header_wctype_h = yes; then
-
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <wctype.h>
-
-_ACEOF
- case "$host_os" in
- aix*) gl_absname_cpp="$ac_cpp -C" ;;
- *) gl_absname_cpp="$ac_cpp" ;;
- esac
-
- case "$host_os" in
- mingw*)
- gl_dirsep_regex='[/\\]'
- ;;
- *)
- gl_dirsep_regex='\/'
- ;;
- esac
- gl_make_literal_regex_sed='s,[]$^\\.*/[],\\&,g'
-
- gl_header_literal_regex=`echo 'wctype.h' \
- | sed -e "$gl_make_literal_regex_sed"`
- gl_absolute_header_sed="/${gl_dirsep_regex}${gl_header_literal_regex}/"'{
- s/.*"\(.*'"${gl_dirsep_regex}${gl_header_literal_regex}"'\)".*/\1/
- s|^/[^/]|//&|
- p
- q
- }'
- gl_cv_next_wctype_h='"'`(eval "$gl_absname_cpp conftest.$ac_ext") 2>&5 |
- sed -n "$gl_absolute_header_sed"`'"'
- else
- gl_cv_next_wctype_h='<'wctype.h'>'
- fi
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_next_wctype_h" >&5
-$as_echo "$gl_cv_next_wctype_h" >&6; }
- fi
- NEXT_WCTYPE_H=$gl_cv_next_wctype_h
-
- if test $gl_cv_have_include_next = yes || test $gl_cv_have_include_next = buggy; then
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next'
- gl_next_as_first_directive='<'wctype.h'>'
- else
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include'
- gl_next_as_first_directive=$gl_cv_next_wctype_h
- fi
- NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H=$gl_next_as_first_directive
-
-
-
-
- if test $ac_cv_header_wctype_h = yes; then
- if test $ac_cv_func_iswcntrl = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether iswcntrl works" >&5
-$as_echo_n "checking whether iswcntrl works... " >&6; }
-if ${gl_cv_func_iswcntrl_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- if test "$cross_compiling" = yes; then :
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
- #if __GNU_LIBRARY__ == 1
- Linux libc5 i18n is broken.
- #endif
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gl_cv_func_iswcntrl_works=yes
-else
- gl_cv_func_iswcntrl_works=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- /* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be
- included before <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h>
- must be included before <wchar.h>. */
- #include <stddef.h>
- #include <stdio.h>
- #include <time.h>
- #include <wchar.h>
- #include <wctype.h>
- int main () { return iswprint ('x') == 0; }
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- gl_cv_func_iswcntrl_works=yes
-else
- gl_cv_func_iswcntrl_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_func_iswcntrl_works" >&5
-$as_echo "$gl_cv_func_iswcntrl_works" >&6; }
- fi
- HAVE_WCTYPE_H=1
- else
- HAVE_WCTYPE_H=0
- fi
-
-
- if test "$gl_cv_func_iswcntrl_works" = no; then
- REPLACE_ISWCNTRL=1
- else
- REPLACE_ISWCNTRL=0
- fi
-
-
- if test $HAVE_ISWCNTRL = 0 || test $REPLACE_ISWCNTRL = 1; then
- :
- fi
-
- if test $REPLACE_ISWCNTRL = 1; then
- REPLACE_TOWLOWER=1
- else
- for ac_func in towlower
-do :
- ac_fn_c_check_func "$LINENO" "towlower" "ac_cv_func_towlower"
-if test "x$ac_cv_func_towlower" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_TOWLOWER 1
-_ACEOF
-
-fi
-done
-
- if test $ac_cv_func_towlower = yes; then
- REPLACE_TOWLOWER=0
- else
- ac_fn_c_check_decl "$LINENO" "towlower" "ac_cv_have_decl_towlower" "/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be
- included before <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h>
- must be included before <wchar.h>. */
- #include <stddef.h>
- #include <stdio.h>
- #include <time.h>
- #include <wchar.h>
- #if HAVE_WCTYPE_H
- # include <wctype.h>
- #endif
-
-"
-if test "x$ac_cv_have_decl_towlower" = xyes; then :
- ac_have_decl=1
-else
- ac_have_decl=0
-fi
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DECL_TOWLOWER $ac_have_decl
-_ACEOF
-
- if test $ac_cv_have_decl_towlower = yes; then
- REPLACE_TOWLOWER=1
- else
- REPLACE_TOWLOWER=0
- fi
- fi
- fi
-
-
- if test $HAVE_ISWCNTRL = 0 || test $REPLACE_TOWLOWER = 1; then
- :
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for wctype_t" >&5
-$as_echo_n "checking for wctype_t... " >&6; }
-if ${gl_cv_type_wctype_t+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be
- included before <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h>
- must be included before <wchar.h>. */
- #include <stddef.h>
- #include <stdio.h>
- #include <time.h>
- #include <wchar.h>
- #if HAVE_WCTYPE_H
- # include <wctype.h>
- #endif
- wctype_t a;
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gl_cv_type_wctype_t=yes
-else
- gl_cv_type_wctype_t=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_type_wctype_t" >&5
-$as_echo "$gl_cv_type_wctype_t" >&6; }
- if test $gl_cv_type_wctype_t = no; then
- HAVE_WCTYPE_T=0
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for wctrans_t" >&5
-$as_echo_n "checking for wctrans_t... " >&6; }
-if ${gl_cv_type_wctrans_t+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be
- included before <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h>
- must be included before <wchar.h>. */
- #include <stddef.h>
- #include <stdio.h>
- #include <time.h>
- #include <wchar.h>
- #include <wctype.h>
- wctrans_t a;
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gl_cv_type_wctrans_t=yes
-else
- gl_cv_type_wctrans_t=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_type_wctrans_t" >&5
-$as_echo "$gl_cv_type_wctrans_t" >&6; }
- if test $gl_cv_type_wctrans_t = no; then
- HAVE_WCTRANS_T=0
- fi
-
-
- for gl_func in wctype iswctype wctrans towctrans ; do
- as_gl_Symbol=`$as_echo "gl_cv_have_raw_decl_$gl_func" | $as_tr_sh`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $gl_func is declared without a macro" >&5
-$as_echo_n "checking whether $gl_func is declared without a macro... " >&6; }
-if eval \${$as_gl_Symbol+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#if !(defined __GLIBC__ && !defined __UCLIBC__)
-# include <stddef.h>
-# include <stdio.h>
-# include <time.h>
-# include <wchar.h>
-#endif
-#include <wctype.h>
-
-int
-main ()
-{
-#undef $gl_func
- (void) $gl_func;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$as_gl_Symbol=yes"
-else
- eval "$as_gl_Symbol=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$as_gl_Symbol
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- if eval test \"x\$"$as_gl_Symbol"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_RAW_DECL_$gl_func" | $as_tr_cpp` 1
-_ACEOF
-
- eval ac_cv_have_decl_$gl_func=yes
-fi
- done
-
-
-
-
-
- :
-
-
- :
-
-
- # End of code from modules
-
-
-
-
-
-
-
-
-
- gltests_libdeps=
- gltests_ltlibdeps=
-
-
-
-
-
-
-
-
-
- gl_source_base='tests'
- gltests_WITNESS=IN_`echo "${PACKAGE-$PACKAGE_TARNAME}" | LC_ALL=C tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ | LC_ALL=C sed -e 's/[^A-Z0-9_]/_/g'`_GNULIB_TESTS
-
- gl_module_indicator_condition=$gltests_WITNESS
-
-
-
-
-
-
-
-
-
- LIBHELLO_LIBDEPS="$gl_libdeps"
-
- LIBHELLO_LTLIBDEPS="$gl_ltlibdeps"
-
-
-
-# GNU help2man creates man pages from --help output; in many cases, this
-# is sufficient, and obviates the need to maintain man pages separately.
-# However, this means invoking executables, which we generally cannot do
-# when cross-compiling, so we test to avoid that (the variable
-# "cross_compiling" is set by AC_PROG_CC).
-if test $cross_compiling = no; then
-
-HELP2MAN=${HELP2MAN-"${am_missing_run}help2man"}
-
-else
- HELP2MAN=:
-fi
-
-# i18n support from GNU gettext.
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
-$as_echo_n "checking whether NLS is requested... " >&6; }
- # Check whether --enable-nls was given.
-if test "${enable_nls+set}" = set; then :
- enableval=$enable_nls; USE_NLS=$enableval
-else
- USE_NLS=yes
-fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
-$as_echo "$USE_NLS" >&6; }
-
-
-
-
- GETTEXT_MACRO_VERSION=0.18
-
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
- # contains only /bin. Note that ksh looks also at the FPATH variable,
- # so we have to set that as well for the test.
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- || PATH_SEPARATOR=';'
- }
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGFMT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case "$MSGFMT" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
- (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
- ;;
-esac
-fi
-MSGFMT="$ac_cv_path_MSGFMT"
-if test "$MSGFMT" != ":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
-$as_echo "$MSGFMT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GMSGFMT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GMSGFMT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
- ;;
-esac
-fi
-GMSGFMT=$ac_cv_path_GMSGFMT
-if test -n "$GMSGFMT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
-$as_echo "$GMSGFMT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
- *) MSGFMT_015=$MSGFMT ;;
- esac
-
- case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
- *) GMSGFMT_015=$GMSGFMT ;;
- esac
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
- # contains only /bin. Note that ksh looks also at the FPATH variable,
- # so we have to set that as well for the test.
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- || PATH_SEPARATOR=';'
- }
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XGETTEXT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case "$XGETTEXT" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
- (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
- ;;
-esac
-fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test "$XGETTEXT" != ":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
-$as_echo "$XGETTEXT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- rm -f messages.po
-
- case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
- *) XGETTEXT_015=$XGETTEXT ;;
- esac
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
- # contains only /bin. Note that ksh looks also at the FPATH variable,
- # so we have to set that as well for the test.
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- || PATH_SEPARATOR=';'
- }
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "msgmerge", so it can be a program name with args.
-set dummy msgmerge; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGMERGE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case "$MSGMERGE" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
- ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
- ;;
-esac
-fi
-MSGMERGE="$ac_cv_path_MSGMERGE"
-if test "$MSGMERGE" != ":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
-$as_echo "$MSGMERGE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$localedir" || localedir='${datadir}/locale'
-
-
- test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
-
-
- ac_config_commands="$ac_config_commands po-directories"
-
-
-
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
- # contains only /bin. Note that ksh looks also at the FPATH variable,
- # so we have to set that as well for the test.
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- || PATH_SEPARATOR=';'
- }
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
-$as_echo_n "checking for ld used by GCC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if ${acl_cv_path_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${acl_cv_prog_gnu_ld+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
-$as_echo "$acl_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$acl_cv_prog_gnu_ld
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
-$as_echo_n "checking for shared library run path origin... " >&6; }
-if ${acl_cv_rpath+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
-$as_echo "$acl_cv_rpath" >&6; }
- wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
- # Check whether --enable-rpath was given.
-if test "${enable_rpath+set}" = set; then :
- enableval=$enable_rpath; :
-else
- enable_rpath=yes
-fi
-
-
-
-
- acl_libdirstem=lib
- acl_libdirstem2=
- case "$host_os" in
- solaris*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
-$as_echo_n "checking for 64-bit host... " >&6; }
-if ${gl_cv_solaris_64bit+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#ifdef _LP64
-sixtyfour bits
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "sixtyfour bits" >/dev/null 2>&1; then :
- gl_cv_solaris_64bit=yes
-else
- gl_cv_solaris_64bit=no
-fi
-rm -f conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
-$as_echo "$gl_cv_solaris_64bit" >&6; }
- if test $gl_cv_solaris_64bit = yes; then
- acl_libdirstem=lib/64
- case "$host_cpu" in
- sparc*) acl_libdirstem2=lib/sparcv9 ;;
- i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
- esac
- fi
- ;;
- *)
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- */../ | */.. )
- # Better ignore directories of this form. They are misleading.
- ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
- ;;
- esac
- test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
-
-
-
-
-
-
-
-
-
-
-
-
- use_additional=yes
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-libiconv-prefix was given.
-if test "${with_libiconv_prefix+set}" = set; then :
- withval=$with_libiconv_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-
-fi
-
- LIBICONV=
- LTLIBICONV=
- INCICONV=
- LIBICONV_PREFIX=
- HAVE_LIBICONV=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='iconv '
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
- else
- :
- fi
- else
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- if test "$acl_hardcode_direct" = yes; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- haveit=
- for x in $LDFLAGS $LIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
- fi
- fi
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = 'iconv'; then
- LIBICONV_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = 'iconv'; then
- LIBICONV_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INCICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- if test -n "$found_la"; then
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
- ;;
- esac
- done
- fi
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
- else
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- for found_dir in $ltrpathdirs; do
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
- done
- fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
-$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
-if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <CoreFoundation/CFPreferences.h>
-int
-main ()
-{
-CFPreferencesCopyAppValue(NULL, NULL)
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gt_cv_func_CFPreferencesCopyAppValue=yes
-else
- gt_cv_func_CFPreferencesCopyAppValue=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$gt_save_LIBS"
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
-$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
-
-$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
-
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
-$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
-if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <CoreFoundation/CFLocale.h>
-int
-main ()
-{
-CFLocaleCopyCurrent();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gt_cv_func_CFLocaleCopyCurrent=yes
-else
- gt_cv_func_CFLocaleCopyCurrent=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$gt_save_LIBS"
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
-$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
- if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
-
-$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
-
- fi
- INTL_MACOSX_LIBS=
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
- fi
-
-
-
-
-
-
- LIBINTL=
- LTLIBINTL=
- POSUB=
-
- case " $gt_needs " in
- *" need-formatstring-macros "*) gt_api_version=3 ;;
- *" need-ngettext "*) gt_api_version=2 ;;
- *) gt_api_version=1 ;;
- esac
- gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
- gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
-
- if test "$USE_NLS" = "yes"; then
- gt_use_preinstalled_gnugettext=no
-
-
- if test $gt_api_version -ge 3; then
- gt_revision_test_code='
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-#endif
-typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-'
- else
- gt_revision_test_code=
- fi
- if test $gt_api_version -ge 2; then
- gt_expression_test_code=' + * ngettext ("", "", 0)'
- else
- gt_expression_test_code=
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
-$as_echo_n "checking for GNU gettext in libc... " >&6; }
-if eval \${$gt_func_gnugettext_libc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern int *_nl_domain_bindings;
-
-int
-main ()
-{
-
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$gt_func_gnugettext_libc=yes"
-else
- eval "$gt_func_gnugettext_libc=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$gt_func_gnugettext_libc
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
-
-
-
-
-
- am_save_CPPFLAGS="$CPPFLAGS"
-
- for element in $INCICONV; do
- haveit=
- for x in $CPPFLAGS; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
- fi
- done
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
-$as_echo_n "checking for iconv... " >&6; }
-if ${am_cv_func_iconv+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <stdlib.h>
-#include <iconv.h>
-
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <stdlib.h>
-#include <iconv.h>
-
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
-$as_echo "$am_cv_func_iconv" >&6; }
- if test "$am_cv_func_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
-$as_echo_n "checking for working iconv... " >&6; }
-if ${am_cv_func_iconv_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- if test "$cross_compiling" = yes; then :
-
- case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac
-
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- int result = 0;
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- result |= 1;
- iconv_close (cd_utf8_to_88591);
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- result |= 2;
- iconv_close (cd_ascii_to_88591);
- }
- }
- /* Test against AIX 6.1..7.1 bug: Buffer overrun. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304";
- static char buf[2] = { (char)0xDE, (char)0xAD };
- const char *inptr = input;
- size_t inbytesleft = 1;
- char *outptr = buf;
- size_t outbytesleft = 1;
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
- result |= 4;
- iconv_close (cd_88591_to_utf8);
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- result |= 8;
- iconv_close (cd_88591_to_utf8);
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- result |= 16;
- return result;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- am_cv_func_iconv_works=yes
-else
- am_cv_func_iconv_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- LIBS="$am_save_LIBS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
-$as_echo "$am_cv_func_iconv_works" >&6; }
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
-
-$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
- fi
- if test "$am_cv_lib_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
-$as_echo_n "checking how to link with libiconv... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
-$as_echo "$LIBICONV" >&6; }
- else
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
-
-
-
-
-
-
-
-
-
-
-
- use_additional=yes
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-libintl-prefix was given.
-if test "${with_libintl_prefix+set}" = set; then :
- withval=$with_libintl_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-
-fi
-
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- LIBINTL_PREFIX=
- HAVE_LIBINTL=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='intl '
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
- else
- :
- fi
- else
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- if test "$acl_hardcode_direct" = yes; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- haveit=
- for x in $LDFLAGS $LIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
- fi
- fi
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = 'intl'; then
- LIBINTL_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = 'intl'; then
- LIBINTL_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INCINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- if test -n "$found_la"; then
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
- ;;
- esac
- done
- fi
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
- else
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- for found_dir in $ltrpathdirs; do
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
- done
- fi
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
-$as_echo_n "checking for GNU gettext in libintl... " >&6; }
-if eval \${$gt_func_gnugettext_libintl+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gt_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $INCINTL"
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBINTL"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-
-int
-main ()
-{
-
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$gt_func_gnugettext_libintl=yes"
-else
- eval "$gt_func_gnugettext_libintl=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
- LIBS="$LIBS $LIBICONV"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-
-int
-main ()
-{
-
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- LIBINTL="$LIBINTL $LIBICONV"
- LTLIBINTL="$LTLIBINTL $LTLIBICONV"
- eval "$gt_func_gnugettext_libintl=yes"
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- fi
- CPPFLAGS="$gt_save_CPPFLAGS"
- LIBS="$gt_save_LIBS"
-fi
-eval ac_res=\$$gt_func_gnugettext_libintl
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- fi
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
- || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
- && test "$PACKAGE" != gettext-runtime \
- && test "$PACKAGE" != gettext-tools; }; then
- gt_use_preinstalled_gnugettext=yes
- else
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- fi
-
-
-
- if test -n "$INTL_MACOSX_LIBS"; then
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
- LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
- fi
- fi
-
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
-
-$as_echo "#define ENABLE_NLS 1" >>confdefs.h
-
- else
- USE_NLS=no
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
-$as_echo_n "checking whether to use NLS... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
-$as_echo "$USE_NLS" >&6; }
- if test "$USE_NLS" = "yes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
-$as_echo_n "checking where the gettext function comes from... " >&6; }
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- gt_source="external libintl"
- else
- gt_source="libc"
- fi
- else
- gt_source="included intl directory"
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
-$as_echo "$gt_source" >&6; }
- fi
-
- if test "$USE_NLS" = "yes"; then
-
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
-$as_echo_n "checking how to link with libintl... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
-$as_echo "$LIBINTL" >&6; }
-
- for element in $INCINTL; do
- haveit=
- for x in $CPPFLAGS; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
- fi
- done
-
- fi
-
-
-$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
-
-
-$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
-
- fi
-
- POSUB=po
- fi
-
-
-
- INTLLIBS="$LIBINTL"
-
-
-
-
-
-
-
-ac_config_files="$ac_config_files Makefile contrib/Makefile doc/Makefile lib/Makefile man/Makefile po/Makefile.in src/Makefile tests/Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes: double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- if test "x$cache_file" != "x/dev/null"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
- else
- case $cache_file in #(
- */* | ?:*)
- mv -f confcache "$cache_file"$$ &&
- mv -f "$cache_file"$$ "$cache_file" ;; #(
- *)
- mv -f confcache "$cache_file" ;;
- esac
- fi
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
- if test -n "$EXEEXT"; then
- am__EXEEXT_TRUE=
- am__EXEEXT_FALSE='#'
-else
- am__EXEEXT_TRUE='#'
- am__EXEEXT_FALSE=
-fi
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- as_fn_error $? "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${GL_COND_LIBTOOL_TRUE}" && test -z "${GL_COND_LIBTOOL_FALSE}"; then
- as_fn_error $? "conditional \"GL_COND_LIBTOOL\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${GL_GENERATE_ERRNO_H_TRUE}" && test -z "${GL_GENERATE_ERRNO_H_FALSE}"; then
- as_fn_error $? "conditional \"GL_GENERATE_ERRNO_H\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-CONFIG_INCLUDE=config.h
-
-if test -z "${GL_GENERATE_STDBOOL_H_TRUE}" && test -z "${GL_GENERATE_STDBOOL_H_FALSE}"; then
- as_fn_error $? "conditional \"GL_GENERATE_STDBOOL_H\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${GL_GENERATE_STDDEF_H_TRUE}" && test -z "${GL_GENERATE_STDDEF_H_FALSE}"; then
- as_fn_error $? "conditional \"GL_GENERATE_STDDEF_H\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-
- gl_libobjs=
- gl_ltlibobjs=
- if test -n "$gl_LIBOBJS"; then
- # Remove the extension.
- sed_drop_objext='s/\.o$//;s/\.obj$//'
- for i in `for i in $gl_LIBOBJS; do echo "$i"; done | sed -e "$sed_drop_objext" | sort | uniq`; do
- gl_libobjs="$gl_libobjs $i.$ac_objext"
- gl_ltlibobjs="$gl_ltlibobjs $i.lo"
- done
- fi
- gl_LIBOBJS=$gl_libobjs
-
- gl_LTLIBOBJS=$gl_ltlibobjs
-
-
-
- gltests_libobjs=
- gltests_ltlibobjs=
- if test -n "$gltests_LIBOBJS"; then
- # Remove the extension.
- sed_drop_objext='s/\.o$//;s/\.obj$//'
- for i in `for i in $gltests_LIBOBJS; do echo "$i"; done | sed -e "$sed_drop_objext" | sort | uniq`; do
- gltests_libobjs="$gltests_libobjs $i.$ac_objext"
- gltests_ltlibobjs="$gltests_ltlibobjs $i.lo"
- done
- fi
- gltests_LIBOBJS=$gltests_libobjs
-
- gltests_LTLIBOBJS=$gltests_ltlibobjs
-
-
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by GNU Hello $as_me 2.8, which was
-generated by GNU Autoconf 2.68. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_links="$ac_config_links"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- --config print configuration, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration links:
-$config_links
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-hello@gnu.org>.
-GNU Hello home page: <http://www.gnu.org/software/hello/>.
-General help using GNU software: <http://www.gnu.org/gethelp/>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-GNU Hello config.status 2.8
-configured by $0, generated by GNU Autoconf 2.68,
- with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=?*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --config | --confi | --conf | --con | --co | --c )
- $as_echo "$ac_cs_config"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- as_fn_append CONFIG_HEADERS " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- as_fn_error $? "ambiguous option: \`$1'
-Try \`$0 --help' for more information.";;
- --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-GNUmakefile=$GNUmakefile
-# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
- # from automake < 1.5.
- eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
- # Capture the value of LINGUAS because we need it to compute CATALOGS.
- LINGUAS="${LINGUAS-%UNSET%}"
-
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "$GNUmakefile") CONFIG_LINKS="$CONFIG_LINKS $GNUmakefile:$GNUmakefile" ;;
- "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "contrib/Makefile") CONFIG_FILES="$CONFIG_FILES contrib/Makefile" ;;
- "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
- "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
- "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
- "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
- "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
- "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
-
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_LINKS+set}" = set || CONFIG_LINKS=$config_links
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp= ac_tmp=
- trap 'exit_status=$?
- : "${ac_tmp:=$tmp}"
- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
- N
- s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = "\a"
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
- ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
- if test -z "$ac_tt"; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any. Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[ ]*#[ ]*define[ ][ ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- for (key in D) D_is_set[key] = 1
- FS = "\a"
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
- line = \$ 0
- split(line, arg, " ")
- if (arg[1] == "#") {
- defundef = arg[2]
- mac1 = arg[3]
- } else {
- defundef = substr(arg[1], 2)
- mac1 = arg[2]
- }
- split(mac1, mac2, "(") #)
- macro = mac2[1]
- prefix = substr(line, 1, index(line, defundef) - 1)
- if (D_is_set[macro]) {
- # Preserve the white space surrounding the "#".
- print prefix "define", macro P[macro] D[macro]
- next
- } else {
- # Replace #undef with comments. This is necessary, for example,
- # in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
- if (defundef == "undef") {
- print "/*", prefix defundef, macro, "*/"
- next
- }
- }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :L $CONFIG_LINKS :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$ac_tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$ac_tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
- "$ac_tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
-
- rm -f "$ac_tmp/stdin"
- case $ac_file in
- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
- esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
- if test x"$ac_file" != x-; then
- {
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
- } >"$ac_tmp/config.h" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f "$ac_file"
- mv "$ac_tmp/config.h" "$ac_file" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- fi
- else
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
- || as_fn_error $? "could not create -" "$LINENO" 5
- fi
-# Compute "$ac_file"'s index in $config_headers.
-_am_arg="$ac_file"
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$_am_arg" : 'X\(//\)[^/]' \| \
- X"$_am_arg" : 'X\(//\)$' \| \
- X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$_am_arg" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
- :L)
- #
- # CONFIG_LINK
- #
-
- if test "$ac_source" = "$ac_file" && test "$srcdir" = '.'; then
- :
- else
- # Prefer the file from the source tree if names are identical.
- if test "$ac_source" = "$ac_file" || test ! -r "$ac_source"; then
- ac_source=$srcdir/$ac_source
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: linking $ac_source to $ac_file" >&5
-$as_echo "$as_me: linking $ac_source to $ac_file" >&6;}
-
- if test ! -r "$ac_source"; then
- as_fn_error $? "$ac_source: file not found" "$LINENO" 5
- fi
- rm -f "$ac_file"
-
- # Try a relative symlink, then a hard link, then a copy.
- case $ac_source in
- [\\/$]* | ?:[\\/]* ) ac_rel_source=$ac_source ;;
- *) ac_rel_source=$ac_top_build_prefix$ac_source ;;
- esac
- ln -s "$ac_rel_source" "$ac_file" 2>/dev/null ||
- ln "$ac_source" "$ac_file" 2>/dev/null ||
- cp -p "$ac_source" "$ac_file" ||
- as_fn_error $? "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
- fi
- ;;
- :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
- ;;
- "po-directories":C)
- for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- # Treat a directory as a PO directory if and only if it has a
- # POTFILES.in file. This allows packages to have multiple PO
- # directories under different names or in different locations.
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- gt_tab=`printf '\t'`
- cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
- POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
- # on $ac_dir but don't depend on user-specified configuration
- # parameters.
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- # Hide the ALL_LINGUAS assignment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # The set of available languages was given in configure.in.
- # Hide the ALL_LINGUAS assignment from automake < 1.5.
- eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- done
- fi
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
- if test -f "$f"; then
- case "$f" in
- *.orig | *.bak | *~) ;;
- *) cat "$f" >> "$ac_dir/Makefile" ;;
- esac
- fi
- done
- fi
- ;;
- esac
- done ;;
-
- esac
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
+++ /dev/null
-dnl Process this file with autoconf to produce a configure script.
-dnl
-dnl This file is free software; as a special exception the author gives
-dnl unlimited permission to copy and/or distribute it, with or without
-dnl modifications, as long as this notice is preserved.
-dnl
-dnl This program is distributed in the hope that it will be useful, but
-dnl WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
-dnl implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-AC_INIT([GNU Hello], [2.8], [bug-hello@gnu.org])
-
-dnl Must come before AM_INIT_AUTOMAKE.
-AC_CONFIG_AUX_DIR([build-aux])
-AM_INIT_AUTOMAKE([readme-alpha])
-
-# Minimum Autoconf version required.
-AC_PREREQ(2.60)
-
-# Where to generate output; srcdir location.
-AC_CONFIG_HEADERS([config.h:config.in])dnl Keep filename to 8.3 for MS-DOS.
-AC_CONFIG_SRCDIR([src/hello.c])
-
-dnl Checks for programs.
-# We need a C compiler.
-AC_PROG_CC
-
-# Since we use gnulib: gl_EARLY must be called as soon as possible after
-# the C compiler is checked. The others could be later, but we just
-# keep everything together.
-gl_EARLY
-gl_INIT
-
-# GNU help2man creates man pages from --help output; in many cases, this
-# is sufficient, and obviates the need to maintain man pages separately.
-# However, this means invoking executables, which we generally cannot do
-# when cross-compiling, so we test to avoid that (the variable
-# "cross_compiling" is set by AC_PROG_CC).
-if test $cross_compiling = no; then
- AM_MISSING_PROG(HELP2MAN, help2man)
-else
- HELP2MAN=:
-fi
-
-# i18n support from GNU gettext.
-AM_GNU_GETTEXT_VERSION([0.18.1])
-AM_GNU_GETTEXT([external])
-
-AC_CONFIG_FILES([Makefile
- contrib/Makefile
- doc/Makefile
- lib/Makefile
- man/Makefile
- po/Makefile.in
- src/Makefile
- tests/Makefile])
-AC_OUTPUT
+++ /dev/null
-2006-08-13 Karl Berry <karl@gnu.org>
-
- * Makefile.am (EXTRA_DIST): hello.1 is no longer contributed,
- now it's generated with help2man.
-
-2000-03-13 Karl EICHWALDER <ke@gnu.franken.de>
-
- * Makefile.am (EXTRA_DIST): Add de_franconian_po.txt.
-
- * de_franconian_po.txt: New file, contributed by Uwe Seifert.
-
-1999-08-21 Karl Eichwalder <ke@gnu.franken.de>
-
- * Makefile.am (EXTRA_DIST): Add the "old" manpage `hello.1'.
-
- * hello.1: From ../doc directory.
-
-1999-07-12 Karl Eichwalder <ke@gnu.franken.de>
-
- * Makefile.am (EXTRA_DIST): New variable. Add `evolution.txt'.
-
- * evolution.txt: New file, submitted by François Pinard
- <pinard@iro.umontreal.ca>.
-
- * Makefile.am: New file.
-
-Copyright (C) 1999, 2000, 2006 Free Software Foundation, Inc.
-
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
-
+++ /dev/null
-# Makefile.am for hello/contrib.
-#
-# Copyright 1999, 2005, 2006, 2007, 2008, 2010 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-EXTRA_DIST = de_franconian_po.txt evolution.txt
+++ /dev/null
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile.am for hello/contrib.
-#
-# Copyright 1999, 2005, 2006, 2007, 2008, 2010 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = contrib
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
- $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \
- $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/configmake.m4 \
- $(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \
- $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-o.m4 \
- $(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/getopt.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/gnulib-common.m4 \
- $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \
- $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
- $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/locale-fr.m4 \
- $(top_srcdir)/m4/locale-ja.m4 $(top_srcdir)/m4/locale-zh.m4 \
- $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \
- $(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/msvc-inval.m4 \
- $(top_srcdir)/m4/msvc-nothrow.m4 $(top_srcdir)/m4/nls.m4 \
- $(top_srcdir)/m4/nocrash.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quotearg.m4 \
- $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdbool.m4 \
- $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
- $(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
- $(top_srcdir)/m4/sys_socket_h.m4 $(top_srcdir)/m4/unistd_h.m4 \
- $(top_srcdir)/m4/warn-on-use.m4 $(top_srcdir)/m4/wchar_h.m4 \
- $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype_h.m4 \
- $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-pkglibexecdir = @pkglibexecdir@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-ARFLAGS = @ARFLAGS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CONFIG_INCLUDE = @CONFIG_INCLUDE@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
-EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
-ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
-ENOLINK_VALUE = @ENOLINK_VALUE@
-EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
-EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
-ERRNO_H = @ERRNO_H@
-EXEEXT = @EXEEXT@
-GETOPT_H = @GETOPT_H@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GNULIB_ATOLL = @GNULIB_ATOLL@
-GNULIB_BTOWC = @GNULIB_BTOWC@
-GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
-GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
-GNULIB_CHDIR = @GNULIB_CHDIR@
-GNULIB_CHOWN = @GNULIB_CHOWN@
-GNULIB_CLOSE = @GNULIB_CLOSE@
-GNULIB_DUP = @GNULIB_DUP@
-GNULIB_DUP2 = @GNULIB_DUP2@
-GNULIB_DUP3 = @GNULIB_DUP3@
-GNULIB_ENVIRON = @GNULIB_ENVIRON@
-GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
-GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
-GNULIB_FCHDIR = @GNULIB_FCHDIR@
-GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
-GNULIB_FDATASYNC = @GNULIB_FDATASYNC@
-GNULIB_FFSL = @GNULIB_FFSL@
-GNULIB_FFSLL = @GNULIB_FFSLL@
-GNULIB_FSYNC = @GNULIB_FSYNC@
-GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
-GNULIB_GETCWD = @GNULIB_GETCWD@
-GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
-GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
-GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
-GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
-GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
-GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
-GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
-GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
-GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
-GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
-GNULIB_GL_UNISTD_H_GETOPT = @GNULIB_GL_UNISTD_H_GETOPT@
-GNULIB_GRANTPT = @GNULIB_GRANTPT@
-GNULIB_GROUP_MEMBER = @GNULIB_GROUP_MEMBER@
-GNULIB_ISATTY = @GNULIB_ISATTY@
-GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
-GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
-GNULIB_LCHOWN = @GNULIB_LCHOWN@
-GNULIB_LINK = @GNULIB_LINK@
-GNULIB_LINKAT = @GNULIB_LINKAT@
-GNULIB_LSEEK = @GNULIB_LSEEK@
-GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
-GNULIB_MBRLEN = @GNULIB_MBRLEN@
-GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
-GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
-GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
-GNULIB_MBSCHR = @GNULIB_MBSCHR@
-GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
-GNULIB_MBSINIT = @GNULIB_MBSINIT@
-GNULIB_MBSLEN = @GNULIB_MBSLEN@
-GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
-GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
-GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
-GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
-GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
-GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
-GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
-GNULIB_MBSSEP = @GNULIB_MBSSEP@
-GNULIB_MBSSPN = @GNULIB_MBSSPN@
-GNULIB_MBSSTR = @GNULIB_MBSSTR@
-GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
-GNULIB_MBTOWC = @GNULIB_MBTOWC@
-GNULIB_MEMCHR = @GNULIB_MEMCHR@
-GNULIB_MEMMEM = @GNULIB_MEMMEM@
-GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
-GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
-GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
-GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
-GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
-GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
-GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
-GNULIB_PIPE = @GNULIB_PIPE@
-GNULIB_PIPE2 = @GNULIB_PIPE2@
-GNULIB_POSIX_OPENPT = @GNULIB_POSIX_OPENPT@
-GNULIB_PREAD = @GNULIB_PREAD@
-GNULIB_PTSNAME = @GNULIB_PTSNAME@
-GNULIB_PTSNAME_R = @GNULIB_PTSNAME_R@
-GNULIB_PUTENV = @GNULIB_PUTENV@
-GNULIB_PWRITE = @GNULIB_PWRITE@
-GNULIB_RANDOM = @GNULIB_RANDOM@
-GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
-GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
-GNULIB_READ = @GNULIB_READ@
-GNULIB_READLINK = @GNULIB_READLINK@
-GNULIB_READLINKAT = @GNULIB_READLINKAT@
-GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
-GNULIB_REALPATH = @GNULIB_REALPATH@
-GNULIB_RMDIR = @GNULIB_RMDIR@
-GNULIB_RPMATCH = @GNULIB_RPMATCH@
-GNULIB_SETENV = @GNULIB_SETENV@
-GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
-GNULIB_SLEEP = @GNULIB_SLEEP@
-GNULIB_STPCPY = @GNULIB_STPCPY@
-GNULIB_STPNCPY = @GNULIB_STPNCPY@
-GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
-GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
-GNULIB_STRDUP = @GNULIB_STRDUP@
-GNULIB_STRERROR = @GNULIB_STRERROR@
-GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
-GNULIB_STRNCAT = @GNULIB_STRNCAT@
-GNULIB_STRNDUP = @GNULIB_STRNDUP@
-GNULIB_STRNLEN = @GNULIB_STRNLEN@
-GNULIB_STRPBRK = @GNULIB_STRPBRK@
-GNULIB_STRSEP = @GNULIB_STRSEP@
-GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
-GNULIB_STRSTR = @GNULIB_STRSTR@
-GNULIB_STRTOD = @GNULIB_STRTOD@
-GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
-GNULIB_STRTOLL = @GNULIB_STRTOLL@
-GNULIB_STRTOULL = @GNULIB_STRTOULL@
-GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
-GNULIB_SYMLINK = @GNULIB_SYMLINK@
-GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
-GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
-GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
-GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
-GNULIB_UNISTD_H_NONBLOCKING = @GNULIB_UNISTD_H_NONBLOCKING@
-GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
-GNULIB_UNLINK = @GNULIB_UNLINK@
-GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
-GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
-GNULIB_UNSETENV = @GNULIB_UNSETENV@
-GNULIB_USLEEP = @GNULIB_USLEEP@
-GNULIB_WCPCPY = @GNULIB_WCPCPY@
-GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
-GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
-GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
-GNULIB_WCSCAT = @GNULIB_WCSCAT@
-GNULIB_WCSCHR = @GNULIB_WCSCHR@
-GNULIB_WCSCMP = @GNULIB_WCSCMP@
-GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
-GNULIB_WCSCPY = @GNULIB_WCSCPY@
-GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
-GNULIB_WCSDUP = @GNULIB_WCSDUP@
-GNULIB_WCSLEN = @GNULIB_WCSLEN@
-GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
-GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
-GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
-GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
-GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
-GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
-GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
-GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
-GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
-GNULIB_WCSSPN = @GNULIB_WCSSPN@
-GNULIB_WCSSTR = @GNULIB_WCSSTR@
-GNULIB_WCSTOK = @GNULIB_WCSTOK@
-GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
-GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
-GNULIB_WCTOB = @GNULIB_WCTOB@
-GNULIB_WCTOMB = @GNULIB_WCTOMB@
-GNULIB_WCTRANS = @GNULIB_WCTRANS@
-GNULIB_WCTYPE = @GNULIB_WCTYPE@
-GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
-GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
-GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
-GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
-GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
-GNULIB_WMEMSET = @GNULIB_WMEMSET@
-GNULIB_WRITE = @GNULIB_WRITE@
-GNULIB__EXIT = @GNULIB__EXIT@
-GREP = @GREP@
-HAVE_ATOLL = @HAVE_ATOLL@
-HAVE_BTOWC = @HAVE_BTOWC@
-HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
-HAVE_CHOWN = @HAVE_CHOWN@
-HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
-HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
-HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
-HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
-HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
-HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
-HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
-HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
-HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
-HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
-HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
-HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
-HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
-HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
-HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
-HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
-HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
-HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
-HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
-HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
-HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
-HAVE_DUP2 = @HAVE_DUP2@
-HAVE_DUP3 = @HAVE_DUP3@
-HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
-HAVE_FACCESSAT = @HAVE_FACCESSAT@
-HAVE_FCHDIR = @HAVE_FCHDIR@
-HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
-HAVE_FDATASYNC = @HAVE_FDATASYNC@
-HAVE_FEATURES_H = @HAVE_FEATURES_H@
-HAVE_FFSL = @HAVE_FFSL@
-HAVE_FFSLL = @HAVE_FFSLL@
-HAVE_FSYNC = @HAVE_FSYNC@
-HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
-HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
-HAVE_GETGROUPS = @HAVE_GETGROUPS@
-HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
-HAVE_GETLOGIN = @HAVE_GETLOGIN@
-HAVE_GETOPT_H = @HAVE_GETOPT_H@
-HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
-HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
-HAVE_GRANTPT = @HAVE_GRANTPT@
-HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
-HAVE_ISWBLANK = @HAVE_ISWBLANK@
-HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
-HAVE_LCHOWN = @HAVE_LCHOWN@
-HAVE_LINK = @HAVE_LINK@
-HAVE_LINKAT = @HAVE_LINKAT@
-HAVE_MBRLEN = @HAVE_MBRLEN@
-HAVE_MBRTOWC = @HAVE_MBRTOWC@
-HAVE_MBSINIT = @HAVE_MBSINIT@
-HAVE_MBSLEN = @HAVE_MBSLEN@
-HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
-HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
-HAVE_MEMCHR = @HAVE_MEMCHR@
-HAVE_MEMPCPY = @HAVE_MEMPCPY@
-HAVE_MKDTEMP = @HAVE_MKDTEMP@
-HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
-HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
-HAVE_MKSTEMP = @HAVE_MKSTEMP@
-HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
-HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
-HAVE_OS_H = @HAVE_OS_H@
-HAVE_PIPE = @HAVE_PIPE@
-HAVE_PIPE2 = @HAVE_PIPE2@
-HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
-HAVE_PREAD = @HAVE_PREAD@
-HAVE_PTSNAME = @HAVE_PTSNAME@
-HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
-HAVE_PWRITE = @HAVE_PWRITE@
-HAVE_RANDOM = @HAVE_RANDOM@
-HAVE_RANDOM_H = @HAVE_RANDOM_H@
-HAVE_RANDOM_R = @HAVE_RANDOM_R@
-HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
-HAVE_READLINK = @HAVE_READLINK@
-HAVE_READLINKAT = @HAVE_READLINKAT@
-HAVE_REALPATH = @HAVE_REALPATH@
-HAVE_RPMATCH = @HAVE_RPMATCH@
-HAVE_SETENV = @HAVE_SETENV@
-HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
-HAVE_SLEEP = @HAVE_SLEEP@
-HAVE_STPCPY = @HAVE_STPCPY@
-HAVE_STPNCPY = @HAVE_STPNCPY@
-HAVE_STRCASESTR = @HAVE_STRCASESTR@
-HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
-HAVE_STRPBRK = @HAVE_STRPBRK@
-HAVE_STRSEP = @HAVE_STRSEP@
-HAVE_STRTOD = @HAVE_STRTOD@
-HAVE_STRTOLL = @HAVE_STRTOLL@
-HAVE_STRTOULL = @HAVE_STRTOULL@
-HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
-HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
-HAVE_SYMLINK = @HAVE_SYMLINK@
-HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
-HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
-HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
-HAVE_UNISTD_H = @HAVE_UNISTD_H@
-HAVE_UNLINKAT = @HAVE_UNLINKAT@
-HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
-HAVE_USLEEP = @HAVE_USLEEP@
-HAVE_WCHAR_H = @HAVE_WCHAR_H@
-HAVE_WCHAR_T = @HAVE_WCHAR_T@
-HAVE_WCPCPY = @HAVE_WCPCPY@
-HAVE_WCPNCPY = @HAVE_WCPNCPY@
-HAVE_WCRTOMB = @HAVE_WCRTOMB@
-HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
-HAVE_WCSCAT = @HAVE_WCSCAT@
-HAVE_WCSCHR = @HAVE_WCSCHR@
-HAVE_WCSCMP = @HAVE_WCSCMP@
-HAVE_WCSCOLL = @HAVE_WCSCOLL@
-HAVE_WCSCPY = @HAVE_WCSCPY@
-HAVE_WCSCSPN = @HAVE_WCSCSPN@
-HAVE_WCSDUP = @HAVE_WCSDUP@
-HAVE_WCSLEN = @HAVE_WCSLEN@
-HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
-HAVE_WCSNCAT = @HAVE_WCSNCAT@
-HAVE_WCSNCMP = @HAVE_WCSNCMP@
-HAVE_WCSNCPY = @HAVE_WCSNCPY@
-HAVE_WCSNLEN = @HAVE_WCSNLEN@
-HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
-HAVE_WCSPBRK = @HAVE_WCSPBRK@
-HAVE_WCSRCHR = @HAVE_WCSRCHR@
-HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
-HAVE_WCSSPN = @HAVE_WCSSPN@
-HAVE_WCSSTR = @HAVE_WCSSTR@
-HAVE_WCSTOK = @HAVE_WCSTOK@
-HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
-HAVE_WCSXFRM = @HAVE_WCSXFRM@
-HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
-HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
-HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
-HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
-HAVE_WINT_T = @HAVE_WINT_T@
-HAVE_WMEMCHR = @HAVE_WMEMCHR@
-HAVE_WMEMCMP = @HAVE_WMEMCMP@
-HAVE_WMEMCPY = @HAVE_WMEMCPY@
-HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
-HAVE_WMEMSET = @HAVE_WMEMSET@
-HAVE__BOOL = @HAVE__BOOL@
-HAVE__EXIT = @HAVE__EXIT@
-HELP2MAN = @HELP2MAN@
-INCLUDE_NEXT = @INCLUDE_NEXT@
-INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBHELLO_LIBDEPS = @LIBHELLO_LIBDEPS@
-LIBHELLO_LTLIBDEPS = @LIBHELLO_LTLIBDEPS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
-LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
-LOCALE_JA = @LOCALE_JA@
-LOCALE_ZH_CN = @LOCALE_ZH_CN@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
-NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
-NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
-NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
-NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
-NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
-NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
-NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
-NEXT_ERRNO_H = @NEXT_ERRNO_H@
-NEXT_GETOPT_H = @NEXT_GETOPT_H@
-NEXT_STDDEF_H = @NEXT_STDDEF_H@
-NEXT_STDLIB_H = @NEXT_STDLIB_H@
-NEXT_STRING_H = @NEXT_STRING_H@
-NEXT_UNISTD_H = @NEXT_UNISTD_H@
-NEXT_WCHAR_H = @NEXT_WCHAR_H@
-NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
-PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
-RANLIB = @RANLIB@
-REPLACE_BTOWC = @REPLACE_BTOWC@
-REPLACE_CALLOC = @REPLACE_CALLOC@
-REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
-REPLACE_CHOWN = @REPLACE_CHOWN@
-REPLACE_CLOSE = @REPLACE_CLOSE@
-REPLACE_DUP = @REPLACE_DUP@
-REPLACE_DUP2 = @REPLACE_DUP2@
-REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
-REPLACE_GETCWD = @REPLACE_GETCWD@
-REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
-REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
-REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
-REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
-REPLACE_ISATTY = @REPLACE_ISATTY@
-REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
-REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
-REPLACE_LCHOWN = @REPLACE_LCHOWN@
-REPLACE_LINK = @REPLACE_LINK@
-REPLACE_LINKAT = @REPLACE_LINKAT@
-REPLACE_LSEEK = @REPLACE_LSEEK@
-REPLACE_MALLOC = @REPLACE_MALLOC@
-REPLACE_MBRLEN = @REPLACE_MBRLEN@
-REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
-REPLACE_MBSINIT = @REPLACE_MBSINIT@
-REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
-REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
-REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
-REPLACE_MBTOWC = @REPLACE_MBTOWC@
-REPLACE_MEMCHR = @REPLACE_MEMCHR@
-REPLACE_MEMMEM = @REPLACE_MEMMEM@
-REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
-REPLACE_NULL = @REPLACE_NULL@
-REPLACE_PREAD = @REPLACE_PREAD@
-REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
-REPLACE_PUTENV = @REPLACE_PUTENV@
-REPLACE_PWRITE = @REPLACE_PWRITE@
-REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
-REPLACE_READ = @REPLACE_READ@
-REPLACE_READLINK = @REPLACE_READLINK@
-REPLACE_REALLOC = @REPLACE_REALLOC@
-REPLACE_REALPATH = @REPLACE_REALPATH@
-REPLACE_RMDIR = @REPLACE_RMDIR@
-REPLACE_SETENV = @REPLACE_SETENV@
-REPLACE_SLEEP = @REPLACE_SLEEP@
-REPLACE_STPNCPY = @REPLACE_STPNCPY@
-REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
-REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
-REPLACE_STRDUP = @REPLACE_STRDUP@
-REPLACE_STRERROR = @REPLACE_STRERROR@
-REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
-REPLACE_STRNCAT = @REPLACE_STRNCAT@
-REPLACE_STRNDUP = @REPLACE_STRNDUP@
-REPLACE_STRNLEN = @REPLACE_STRNLEN@
-REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
-REPLACE_STRSTR = @REPLACE_STRSTR@
-REPLACE_STRTOD = @REPLACE_STRTOD@
-REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
-REPLACE_SYMLINK = @REPLACE_SYMLINK@
-REPLACE_TOWLOWER = @REPLACE_TOWLOWER@
-REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
-REPLACE_UNLINK = @REPLACE_UNLINK@
-REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
-REPLACE_UNSETENV = @REPLACE_UNSETENV@
-REPLACE_USLEEP = @REPLACE_USLEEP@
-REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
-REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
-REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
-REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
-REPLACE_WCTOB = @REPLACE_WCTOB@
-REPLACE_WCTOMB = @REPLACE_WCTOMB@
-REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
-REPLACE_WRITE = @REPLACE_WRITE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STDBOOL_H = @STDBOOL_H@
-STDDEF_H = @STDDEF_H@
-STRIP = @STRIP@
-UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
-UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
-UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gl_LIBOBJS = @gl_LIBOBJS@
-gl_LTLIBOBJS = @gl_LTLIBOBJS@
-gltests_LIBOBJS = @gltests_LIBOBJS@
-gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
-gltests_WITNESS = @gltests_WITNESS@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-lispdir = @lispdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = de_franconian_po.txt evolution.txt
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu contrib/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu contrib/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-So weit so gut. Es folgen die beiden Übersetzungen, zuerst "anständig",
-dann humorvoll:
-
-----------------------------------------------------------------------
-# German messages for GNU hello.
-# Fränkische Meldungen für GNU hello.
-# Copyright © 1998 Free Software Foundation, Inc.
-# Karl Eichwalder <ke@ke.Central.DE>, 1996-97.
-# Karl Eichwalder <ke@suse.de>, 1998.
-# Uwe Seifert, 2000 (translation german » franconian)
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 1.3.21\n"
-"POT-Creation-Date: 1999-08-21 08:11+0200\n"
-"PO-Revision-Date: 1998-12-12 10:46+01:00\n"
-"Last-Translator: Karl Eichwalder <ke@suse.de>\n"
-"Language-Team: German <de@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/getopt.c:582
-#, c-format
-msgid "%s: option `%s' is ambiguous\n"
-msgstr "%s: Obzion »%s« is zwaadeidich.\n"
-
-#: src/getopt.c:606
-#, c-format
-msgid "%s: option `--%s' doesn't allow an argument\n"
-msgstr "%s: Obzion »--%s« erlaubd kann Barameder.\n"
-
-#: src/getopt.c:611
-#, c-format
-msgid "%s: option `%c%s' doesn't allow an argument\n"
-msgstr "%s: Obzion »%c%s« erlaubd kann Barameder.\n"
-
-#: src/getopt.c:628 src/getopt.c:801
-#, c-format
-msgid "%s: option `%s' requires an argument\n"
-msgstr "%s: Obzion »%s« brauchd an Barameder.\n"
-
-#. --option
-#: src/getopt.c:657
-#, c-format
-msgid "%s: unrecognized option `--%s'\n"
-msgstr "%s: Ned erkannde Obzion »--%s«.\n"
-
-#. +option or -option
-#: src/getopt.c:661
-#, c-format
-msgid "%s: unrecognized option `%c%s'\n"
-msgstr "%s: Ned erkannde Obzion »%c%s«.\n"
-
-#. 1003.2 specifies the format of this message.
-#: src/getopt.c:687
-#, c-format
-msgid "%s: illegal option -- %c\n"
-msgstr "%s: Ned erlaubde Obzion -- %c.\n"
-
-#: src/getopt.c:690
-#, c-format
-msgid "%s: invalid option -- %c\n"
-msgstr "%s: Ungüldiche Obzion -- %c.\n"
-
-#: src/getopt.c:721 src/getopt.c:850
-#, c-format
-msgid "%s: option requires an argument -- %c\n"
-msgstr "%s: Obzion brauchd an Barameder -- %c.\n"
-
-#: src/getopt.c:767
-#, c-format
-msgid "%s: option `-W %s' is ambiguous\n"
-msgstr "%s: Obzion »-W %s« is zwaadeidich.\n"
-
-#: src/getopt.c:786
-#, c-format
-msgid "%s: option `-W %s' doesn't allow an argument\n"
-msgstr "%s: Obzion »-W %s« erlaubd kaa Archumend.\n"
-
-#: src/hello.c:147
-msgid "Too many arguments\n"
-msgstr "Z'vill Barameder!\n"
-
-#: src/hello.c:148
-#, c-format
-msgid "Try `%s --help' for more information\n"
-msgstr "Brobier amol »%s --help« fiir weidere Informationä.\n"
-
-# Sonst meist: ``Zeige diese Informationen und beende''
-#. Print help info and exit.
-#: src/hello.c:158
-#, fuzzy, c-format
-msgid ""
-"GNU hello, THE greeting printing program.\n"
-"\n"
-"Usage: %s [OPTION]\n"
-"\n"
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-" -t, --traditional use traditional greeting format\n"
-" -m, --mail print your mail\n"
-"\n"
-"Report bugs to bug-gnu-hello@prep.ai.mit.edu.\n"
-msgstr ""
-"Des dou is »GNU Hello«, DES Willkommen-sach-Brogramm.\n"
-"Syntax: %s [OPTION]\n"
-" -h, --help Däi Hilfe dou oozeing.\n"
-" -v, --version Brogrammväsion oozeing.\n"
-" -t, --traditional Traditionelle Willkommen-Forml verwendn.\n"
-" -m, --mail E-Mail oozeing.\n"
-"\n"
-"Fehler biddschön oo <bug-gnu-hello@gnu.ai.mit.edu> meldn.\n"
-
-#: src/hello.c:179
-#, fuzzy, c-format, no-wrap
-msgid ""
-"\n"
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-"PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the terms\n"
-"of the GNU General Public License.\n"
-"For more information about these matters, see the file named COPYING.\n"
-msgstr ""
-"Copyright © %s Free Software Foundation, Inc.\n"
-"Des Brogramm GNU %s is freie Software; die gnaua Nudzungsbedingunga\n"
-"moust der Dadei »COPYING« in die Quelln endnehma.\n"
-"Es wärd ibberhabbs kanna Gwährleisdung übernumma; aa ned fiir gwerbliche\n"
-"Nudzboarkeid odder Dauglichkeid zu an andern Zwegg!\n"
-
-#: src/hello.c:191
-#, c-format
-msgid "%s: incompatible flags: -m and -t\n"
-msgstr "%s: Ungüldiche Kombination vo di Obziona: »-m« un »-t«\n"
-
-#: src/hello.c:223
-#, c-format
-msgid "%s: Who are you?\n"
-msgstr "%s: Wär bisdn Du?\n"
-
-#: src/hello.c:245
-#, c-format
-msgid "%s: cannot find your mail spool file.\n"
-msgstr "%s: Spool-Dadei mid dä E-Mail is ned z' findn.\n"
-
-#: src/hello.c:289
-msgid "Nothing happens here."
-msgstr "Dou is nix lous."
-
-#: src/hello.c:295
-msgid "hello, world\n"
-msgstr "hallo, Weld\n"
-
-#: src/hello.c:297
-msgid "Hello, world!"
-msgstr "Hallo, Weld!"
-
-# Oder einfach: "Speicher voll"?
-#: src/hello.c:312
-#, c-format
-msgid "%s: virtual memory exhausted\n"
-msgstr "%s: Ärwerdsschbeicher is vull!\n"
-----------------------------------------------------------------------
-
-----------------------------------------------------------------------
-# Franconian messages for GNU hello.
-# Fränkische Meldungen für GNU hello.
-# Copyright © 1998 Free Software Foundation, Inc.
-# Karl Eichwalder <ke@ke.Central.DE>, 1996-97.
-# Karl Eichwalder <ke@suse.de>, 1998.
-# Uwe Seifert, 2000 (translation german » franconian)
-# *** Achtung! Diese Version ist nur für Personen gedacht, die Spass
-# *** und den fränkischen Dialekt verstehen! Niemand soll damit
-# *** beleidigt werden!
-# *** Attention! Only for franconian people with a sense of humor.
-# *** Nobody should be offendedby this!
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 1.3.21\n"
-"POT-Creation-Date: 1999-08-21 08:11+0200\n"
-"PO-Revision-Date: 1998-12-12 10:46+01:00\n"
-"Last-Translator: Karl Eichwalder <ke@suse.de>\n"
-"Language-Team: German <de@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/getopt.c:582
-#, c-format
-msgid "%s: option `%s' is ambiguous\n"
-msgstr "%s: Obzion »%s« is zwaadeidich. Wos edz?\n"
-
-#: src/getopt.c:606
-#, c-format
-msgid "%s: option `--%s' doesn't allow an argument\n"
-msgstr "%s: Bei »--%s« is fei kaa Barameder erlaubd, härsd!\n"
-
-#: src/getopt.c:611
-#, c-format
-msgid "%s: option `%c%s' doesn't allow an argument\n"
-msgstr "%s: Horch amol, bei »%c%s« is fei kaa Barameder erlaubd!\n"
-
-#: src/getopt.c:628 src/getopt.c:801
-#, c-format
-msgid "%s: option `%s' requires an argument\n"
-msgstr "%s: Bei »%s« mousd scho derzouschreim wosd willsd!\n"
-
-#. --option
-#: src/getopt.c:657
-#, c-format
-msgid "%s: unrecognized option `--%s'\n"
-msgstr "%s: Wos willsdn Du vo mir mid Dein bläiden »--%s« ?\n"
-
-#. +option or -option
-#: src/getopt.c:661
-#, c-format
-msgid "%s: unrecognized option `%c%s'\n"
-msgstr "%s: Mid »%c%s« koo i nix oofanga!\n"
-
-#. 1003.2 specifies the format of this message.
-#: src/getopt.c:687
-#, c-format
-msgid "%s: illegal option -- %c\n"
-msgstr "%s: Kumm, hää auf mid Dein Gschmarri! Dei »-- %c« verschdäid doch kaa Sau!\n"
-
-#: src/getopt.c:690
-#, c-format
-msgid "%s: invalid option -- %c\n"
-msgstr "%s: Mid suu an bläidn Gwaaf wäi »-- %c« konni nix oofanga!\n"
-
-#: src/getopt.c:721 src/getopt.c:850
-#, c-format
-msgid "%s: option requires an argument -- %c\n"
-msgstr "%s: Bei »-- %c« mousd scho gnauer schreim, wosd willsd!\n"
-
-#: src/getopt.c:767
-#, c-format
-msgid "%s: option `-W %s' is ambiguous\n"
-msgstr "%s: Obzion »-W %s« is zwaadeidich. Soch, wosd willsd!\n"
-
-#: src/getopt.c:786
-#, c-format
-msgid "%s: option `-W %s' doesn't allow an argument\n"
-msgstr "%s: Bei dä Obzion »-W %s« sin kanne Archumende erlaubd, basda!\n"
-
-#: src/hello.c:147
-msgid "Too many arguments\n"
-msgstr "Hä auf mid Dein Gwerch! Des sin vill z' vill Barameder!\n"
-
-#: src/hello.c:148
-#, c-format
-msgid "Try `%s --help' for more information\n"
-msgstr "Brobier amol »%s --help« wennsd di scho ned auskennsd.\n"
-
-# Sonst meist: ``Zeige diese Informationen und beende''
-#. Print help info and exit.
-#: src/hello.c:158
-#, fuzzy, c-format
-msgid ""
-"GNU hello, THE greeting printing program.\n"
-"\n"
-"Usage: %s [OPTION]\n"
-"\n"
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-" -t, --traditional use traditional greeting format\n"
-" -m, --mail print your mail\n"
-"\n"
-"Report bugs to bug-gnu-hello@prep.ai.mit.edu.\n"
-msgstr ""
-"Des dou is »GNU Hello«, DES Willkommen-sach-Brogramm ibberhabbs.\n"
-"Syntax: %s [OPTION]\n"
-" -h, --help Däi Hilfe dou hääzindn.\n"
-" -v, --version Brogrammväsion oozeing.\n"
-" -t, --traditional Aldbaggne Willkommen-Forml verwendn.\n"
-" -m, --mail E-Mail oozeing.\n"
-"\n"
-"Fehler biddschön oo <bug-gnu-hello@gnu.ai.mit.edu> meldn.\n"
-
-#: src/hello.c:179
-#, fuzzy, c-format, no-wrap
-msgid ""
-"\n"
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-"PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the terms\n"
-"of the GNU General Public License.\n"
-"For more information about these matters, see the file named COPYING.\n"
-msgstr ""
-"Copyright © %s Free Software Foundation, Inc.\n"
-"Des Brogramm GNU %s is freie Software; die gnaua Nudzungsbedingunga\n"
-"moust der Dadei »COPYING« in die Quelln endnehma.\n"
-"Es wärd ibberhabbs kanna Gwährleisdung übernumma; aa ned fiir gwerbliche\n"
-"Nudzboarkeid odder Dauglichkeid zu an andern Zwegg.\n"
-
-#: src/hello.c:191
-#, c-format
-msgid "%s: incompatible flags: -m and -t\n"
-msgstr "%s: Ungüldiche Kombination vo di Obziona: »-m« un »-t«\n"
-
-#: src/hello.c:223
-#, c-format
-msgid "%s: Who are you?\n"
-msgstr "%s: Wär bisdn Du? Mach's Maul aaf, obbä fix!\n"
-
-#: src/hello.c:245
-#, c-format
-msgid "%s: cannot find your mail spool file.\n"
-msgstr "%s: Spool-Dadei mid dä E-Mail is in den Sauschdall dou ned z' findn.\n"
-
-#: src/hello.c:289
-msgid "Nothing happens here."
-msgstr "Nix lous in den Schubbn dou."
-
-#: src/hello.c:295
-msgid "hello, world\n"
-msgstr "hallo, Weld\n"
-
-#: src/hello.c:297
-msgid "Hello, world!"
-msgstr "Hallo, Weld!"
-
-# Oder einfach: "Speicher voll"?
-#: src/hello.c:312
-#, c-format
-msgid "%s: virtual memory exhausted\n"
-msgstr "%s: Ärwerdsschbeicher is vullgwerchd bis zon gäidnimmä!\n"
-----------------------------------------------------------------------
+++ /dev/null
-To: Karl Eichwalder <ke@suse.de>
-Subject: The Evolution of a Programmer
-From: =?ISO-8859-1?Q?Fran=E7ois_Pinard?= <pinard@iro.umontreal.ca>
-Date: 10 May 1999 21:16:05 -0400
-Message-ID: <oqaevcv222.fsf@titan.progiciels-bpi.ca>
-MIME-Version: 1.0
-Content-Type: multipart/mixed; boundary="=-=-="
-X-Content-Length: 6474
-Lines: 363
-
-
---=-=-=
-
-Hello, Karl.
-
-Cleaning old files, I found this one, which is kind of amusing. It was
-re-distributed on a local list of system administrators, a few years ago,
-but the real origin is unknown to me.
-
-You might find it amusing, or not, I do not know. I wonder if you
-could not slip it somewhere in the `hello' distribution. Who knows,
-you might start a `contrib/' subdirectory to the distribution. See
-`http://www.iro.umontreal.ca/contrib/paxutils/dist/contrib/' for ideas :-).
-
- Keep happy! :-)
-
-
---=-=-=
-Content-Type: message/rfc822
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-
-Date: Wed, 05 Oct 1994 15:13:42 -0600
-Subject: The Evolution of a Programmer
-
-
-The Evolution of a Programmer
------------------------------
-
-High School/Jr.High
-===================
-10 PRINT "HELLO WORLD"
-20 END
-
-First year in College
-=====================
-program Hello(input, output)
- begin
- writeln('Hello World')
- end.
-
-Senior year in College
-======================
-(defun hello
- (print
- (cons 'Hello (list 'World))))
-
-New professional
-================
-#include <stdio.h>
-void main(void)
-{
- char *message[] = {"Hello ", "World"};
- int i;
-
- for(i = 0; i < 2; ++i)
- printf("%s", message[i]);
- printf("\n");
-}
-
-Seasoned professional
-=====================
-#include <iostream.h>
-#include <string.h>
-
-class string
-{
-private:
- int size;
- char *ptr;
-
-public:
- string() : size(0), ptr(new char('\0')) {}
-
- string(const string &s) : size(s.size)
- {
- ptr = new char[size + 1];
- strcpy(ptr, s.ptr);
- }
-
- ~string()
- {
- delete [] ptr;
- }
-
- friend ostream &operator <<(ostream &, const string &);
- string &operator=(const char *);
-};
-
-ostream &operator<<(ostream &stream, const string &s)
-{
- return(stream << s.ptr);
-}
-
-string &string::operator=(const char *chrs)
-{
- if (this != &chrs)
- {
- delete [] ptr;
- size = strlen(chrs);
- ptr = new char[size + 1];
- strcpy(ptr, chrs);
- }
- return(*this);
-}
-
-int main()
-{
- string str;
-
- str = "Hello World";
- cout << str << endl;
-
- return(0);
-}
-
-Master Programmer
-=================
-[
-uuid(2573F8F4-CFEE-101A-9A9F-00AA00342820)
-]
-library LHello
-{
- // bring in the master library
- importlib("actimp.tlb");
- importlib("actexp.tlb");
-
- // bring in my interfaces
- #include "pshlo.idl"
-
- [
- uuid(2573F8F5-CFEE-101A-9A9F-00AA00342820)
- ]
- cotype THello
- {
- interface IHello;
- interface IPersistFile;
- };
-};
-
-[
-exe,
-uuid(2573F890-CFEE-101A-9A9F-00AA00342820)
-]
-module CHelloLib
-{
-
- // some code related header files
- importheader(<windows.h>);
- importheader(<ole2.h>);
- importheader(<except.hxx>);
- importheader("pshlo.h");
- importheader("shlo.hxx");
- importheader("mycls.hxx");
-
- // needed typelibs
- importlib("actimp.tlb");
- importlib("actexp.tlb");
- importlib("thlo.tlb");
-
- [
- uuid(2573F891-CFEE-101A-9A9F-00AA00342820),
- aggregatable
- ]
- coclass CHello
- {
- cotype THello;
- };
-};
-
-
-#include "ipfix.hxx"
-
-extern HANDLE hEvent;
-
-class CHello : public CHelloBase
-{
-public:
- IPFIX(CLSID_CHello);
-
- CHello(IUnknown *pUnk);
- ~CHello();
-
- HRESULT __stdcall PrintSz(LPWSTR pwszString);
-
-private:
- static int cObjRef;
-};
-
-
-#include <windows.h>
-#include <ole2.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include "thlo.h"
-#include "pshlo.h"
-#include "shlo.hxx"
-#include "mycls.hxx"
-
-int CHello::cObjRef = 0;
-
-CHello::CHello(IUnknown *pUnk) : CHelloBase(pUnk)
-{
- cObjRef++;
- return;
-}
-
-HRESULT __stdcall CHello::PrintSz(LPWSTR pwszString)
-{
- printf("%ws\n", pwszString);
- return(ResultFromScode(S_OK));
-}
-
-
-CHello::~CHello(void)
-{
-
-// when the object count goes to zero, stop the server
-cObjRef--;
-if( cObjRef == 0 )
- PulseEvent(hEvent);
-
-return;
-}
-
-#include <windows.h>
-#include <ole2.h>
-#include "pshlo.h"
-#include "shlo.hxx"
-#include "mycls.hxx"
-
-HANDLE hEvent;
-
- int _cdecl main(
-int argc,
-char * argv[]
-) {
-ULONG ulRef;
-DWORD dwRegistration;
-CHelloCF *pCF = new CHelloCF();
-
-hEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
-
-// Initialize the OLE libraries
-CoInitializeEx(NULL, COINIT_MULTITHREADED);
-
-CoRegisterClassObject(CLSID_CHello, pCF, CLSCTX_LOCAL_SERVER,
- REGCLS_MULTIPLEUSE, &dwRegistration);
-
-// wait on an event to stop
-WaitForSingleObject(hEvent, INFINITE);
-
-// revoke and release the class object
-CoRevokeClassObject(dwRegistration);
-ulRef = pCF->Release();
-
-// Tell OLE we are going away.
-CoUninitialize();
-
-return(0);
-}
-
-extern CLSID CLSID_CHello;
-extern UUID LIBID_CHelloLib;
-
-CLSID CLSID_CHello = { /* 2573F891-CFEE-101A-9A9F-00AA00342820 */
- 0x2573F891,
- 0xCFEE,
- 0x101A,
- { 0x9A, 0x9F, 0x00, 0xAA, 0x00, 0x34, 0x28, 0x20 }
-};
-
-UUID LIBID_CHelloLib = { /* 2573F890-CFEE-101A-9A9F-00AA00342820 */
- 0x2573F890,
- 0xCFEE,
- 0x101A,
- { 0x9A, 0x9F, 0x00, 0xAA, 0x00, 0x34, 0x28, 0x20 }
-};
-
-#include <windows.h>
-#include <ole2.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdio.h>
-#include "pshlo.h"
-#include "shlo.hxx"
-#include "clsid.h"
-
-int _cdecl main(
-int argc,
-char * argv[]
-) {
-HRESULT hRslt;
-IHello *pHello;
-ULONG ulCnt;
-IMoniker * pmk;
-WCHAR wcsT[_MAX_PATH];
-WCHAR wcsPath[2 * _MAX_PATH];
-
-// get object path
-wcsPath[0] = '\0';
-wcsT[0] = '\0';
-if( argc > 1) {
- mbstowcs(wcsPath, argv[1], strlen(argv[1]) + 1);
- wcsupr(wcsPath);
- }
-else {
- fprintf(stderr, "Object path must be specified\n");
- return(1);
- }
-
-// get print string
-if(argc > 2)
- mbstowcs(wcsT, argv[2], strlen(argv[2]) + 1);
-else
- wcscpy(wcsT, L"Hello World");
-
-printf("Linking to object %ws\n", wcsPath);
-printf("Text String %ws\n", wcsT);
-
-// Initialize the OLE libraries
-hRslt = CoInitializeEx(NULL, COINIT_MULTITHREADED);
-
-if(SUCCEEDED(hRslt)) {
-
-
- hRslt = CreateFileMoniker(wcsPath, &pmk);
- if(SUCCEEDED(hRslt))
- hRslt = BindMoniker(pmk, 0, IID_IHello, (void **)&pHello);
-
- if(SUCCEEDED(hRslt)) {
-
- // print a string out
- pHello->PrintSz(wcsT);
-
- Sleep(2000);
- ulCnt = pHello->Release();
- }
- else
- printf("Failure to connect, status: %lx", hRslt);
-
- // Tell OLE we are going away.
- CoUninitialize();
- }
-
-return(0);
-}
-
-# END: return programmer to real world
-
---=-=-=
-Content-Type: text/plain; charset=iso-8859-1
-Content-Transfer-Encoding: 8bit
-
-
---
-François Pinard http://www.iro.umontreal.ca/~pinard
-
---=-=-=--
+++ /dev/null
-2011-05-18 Reuben Thomas <rrt@sc3d.org>
-
- * hello.texi (Reporting bugs): point out that bug-hello is for all
- discussions, not just bugs. (From Karl Berry.)
-
-2011-03-22 Karl Berry <karl@gnu.org>
-
- * hello.texi: 2011.
- (Overview): gnulib Introduction rather than Gnulib, etc.
-
-2010-12-31 Karl Berry <karl@gnu.org>
-
- * hello.texi (Top): Don't use @insertcopying, per rms.
-
-2010-04-08 Karl Berry <karl@gnu.org>
-
- * hello.texi (Top): No need to repeat what the manual is.
-
-2010-04-05 Karl Berry <karl@gnu.org>
-
- * hello.texi (Overview): mention srclist-update.
-
-2010-01-31 Karl Berry <karl@gnu.org>
-
- * hello.texi (@copying): update copyright year, even though
- we have no other changes.
-
-2009-01-28 Karl Berry <karl@gnu.org>
-
- * hello.texi (Overview): automake/autoconf cross-manual names
- are lowercase. Report from Paul Goins, 28 Jan 2009 01:02:03.
-
-2009-01-25 Karl Berry <karl@gnu.org>
-
- * hello.texi (Top): use @insertcopying, so the copying notice
- shows up in the plain text output.
-
-2008-12-14 Karl Berry <karl@gnu.org>
-
- * hello.texi (Overview): mention the special targets in Makefile.am.
-
-2008-12-09 Karl Berry <karl@gnu.org>
-
- * hello.texi (Invoking hello): mention translation project.
-
-2008-11-28 Karl Berry <karl@gnu.org>
-
- * hello.texi (Invoking hello): mention that the last-specified
- greeting option is what counts.
-
-2008-11-05 Karl Berry <karl@gnu.org>
-
- * fdl.texi: update to 1.3.
-
-2008-09-24 Karl Berry <karl@gnu.org>
-
- * hello.texi: be more systematic about Hello vs. @samp{hello}.
-
-2007-07-14 Karl Berry <karl@gnu.org>
-
- * fdl.texi: new version without sectioning commands.
- * hello.texi: update accordingly.
-
-2007-07-09 Karl Berry <karl@gnu.org>
-
- * hello.texi (@copying): rms says that only the GNU manuals
- published on paper by the FSF need the standard Cover Texts.
-
-2006-11-23 Karl Berry <karl@gnu.org>
-
- * hello.texi (Introduction): capitalize Gnulib, for consistency.
-
-2006-11-08 Karl Berry <karl@gnu.org>
-
- * hello.texi (Sample output): remove wrong --help example.
- Change node names to "Initial cap only" style.
-
-2006-07-15 Karl Berry <karl@gnu.org>
-
- * hello.texi: thoroughly update the entire manual.
-
-2006-05-03 Karl Berry <karl@gnu.org>
-
- * hello.texi: bring somewhat up to date.
-
-2005-03-21 Karl Berry <karl@gnu.org>
-
- * doc/hello.texi: switch to GFDL; make Texinfo source follow
- current practices.
-
-2002-05-25 Karl Eichwalder <ke@gnu.franken.de>
-
- * gpl.texi: Use the contents auf emacs.texi (Emacs CVS).
-
-2002-05-22 Karl Eichwalder <ke@suse.de>
-
- * texinfo.tex: Update to version 2002-03-26.08 (from texinfo
- 4.2).
- * hello.texi: Use the @copying directive to get the copyright
- notice output properly into all output formats.
- Reported by Paul Eggert.
-
- * hello.texi: Run s/prep.ai.mit.edu/gnu.org/ .
- Reported by Paul Eggert.
-
- * hello.texi: Add 2002 to the copyright statement.
-
-1999-08-21 Karl Eichwalder <ke@gnu.franken.de>
-
- * Makefile.am: Move old contributed manpage to ../contrib.
- (EXTRA_DIST): Remove target.
- (man_MANS): Ditto.
-
-1999-01-31 Karl Eichwalder <ke@suse.de>
-
- * hello.texi: Replace --help output; use the @email macro.
-
- * texinfo.tex: Renewed from automake-1.4.
-
-1998-04-04 Karl Eichwalder <ke@suse.de>
-
- * hello.1: Warn about probably out of date documentation in the
- manpage.
-
-1998-02-28 Karl Eichwalder <ke@suse.de>
-
- * Makefile.am (man_MANS): New variable; add hello.1.
- (EXTRA_DIST): New variable; add hello.1.
-
- * hello.1: New file. Manpage written by E. Larry Lidz
- <ellidz@eridu.uchicago.edu>.
-
-Sun May 25 18:50:54 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * mdate-sh, texinfo.tex: New files from automake-1.1p.
-
-Fri Jan 17 12:12:11 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * mdate-sh: New file from gettext-0.10.26.
-
-Thu Jan 9 18:34:10 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am: Delete EXTRA_DIST.
-
-Thu Dec 12 20:45:40 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.texi: use @dircategory and @direntry.
-
-Thu Dec 5 17:39:56 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (info_TEXINFOS, hello_TEXINFOS, EXTRA_DIST):
- define.
-
- * hello.texi (Copying): include gpl.texi.
-
- * Rename gpl.texinfo to gpl.texi for automake's demands.
-
- * Makefile.am: new file.
-
-Sun Mar 3 11:48:14 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.in (hello.info, dvi): Add gpl.texinfo and
- version.texi.
-
- * version.texi: 1.3.1.
-
-Tue Dec 19 08:26:09 1995 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.texi: include version.texi.
-
- * mdate-sh: New file; stolen from `sharutils-4.2'.
-
- * Makefile.in, version.texi: New file.
-
-Copyright 1995, 1996, 1997, 1998, 1999, 2002, 2005, 2006, 2008
-Free Software Foundation, Inc.
-
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
+++ /dev/null
-# Makefile.am for hello/doc.
-#
-# Copyright 1996, 1997, 2005, 2007, 2008, 2010 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-info_TEXINFOS = hello.texi
-hello_TEXINFOS = fdl.texi
+++ /dev/null
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile.am for hello/doc.
-#
-# Copyright 1996, 1997, 2005, 2007, 2008, 2010 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = doc
-DIST_COMMON = $(hello_TEXINFOS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/stamp-vti \
- $(srcdir)/version.texi ChangeLog
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
- $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \
- $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/configmake.m4 \
- $(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \
- $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-o.m4 \
- $(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/getopt.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/gnulib-common.m4 \
- $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \
- $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
- $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/locale-fr.m4 \
- $(top_srcdir)/m4/locale-ja.m4 $(top_srcdir)/m4/locale-zh.m4 \
- $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \
- $(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/msvc-inval.m4 \
- $(top_srcdir)/m4/msvc-nothrow.m4 $(top_srcdir)/m4/nls.m4 \
- $(top_srcdir)/m4/nocrash.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quotearg.m4 \
- $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdbool.m4 \
- $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
- $(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
- $(top_srcdir)/m4/sys_socket_h.m4 $(top_srcdir)/m4/unistd_h.m4 \
- $(top_srcdir)/m4/warn-on-use.m4 $(top_srcdir)/m4/wchar_h.m4 \
- $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype_h.m4 \
- $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-INFO_DEPS = $(srcdir)/hello.info
-TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
-am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
-DVIS = hello.dvi
-PDFS = hello.pdf
-PSS = hello.ps
-HTMLS = hello.html
-TEXINFOS = hello.texi
-TEXI2DVI = texi2dvi
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-MAKEINFOHTML = $(MAKEINFO) --html
-AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-DVIPS = dvips
-am__installdirs = "$(DESTDIR)$(infodir)"
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-pkglibexecdir = @pkglibexecdir@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-ARFLAGS = @ARFLAGS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CONFIG_INCLUDE = @CONFIG_INCLUDE@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
-EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
-ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
-ENOLINK_VALUE = @ENOLINK_VALUE@
-EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
-EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
-ERRNO_H = @ERRNO_H@
-EXEEXT = @EXEEXT@
-GETOPT_H = @GETOPT_H@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GNULIB_ATOLL = @GNULIB_ATOLL@
-GNULIB_BTOWC = @GNULIB_BTOWC@
-GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
-GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
-GNULIB_CHDIR = @GNULIB_CHDIR@
-GNULIB_CHOWN = @GNULIB_CHOWN@
-GNULIB_CLOSE = @GNULIB_CLOSE@
-GNULIB_DUP = @GNULIB_DUP@
-GNULIB_DUP2 = @GNULIB_DUP2@
-GNULIB_DUP3 = @GNULIB_DUP3@
-GNULIB_ENVIRON = @GNULIB_ENVIRON@
-GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
-GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
-GNULIB_FCHDIR = @GNULIB_FCHDIR@
-GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
-GNULIB_FDATASYNC = @GNULIB_FDATASYNC@
-GNULIB_FFSL = @GNULIB_FFSL@
-GNULIB_FFSLL = @GNULIB_FFSLL@
-GNULIB_FSYNC = @GNULIB_FSYNC@
-GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
-GNULIB_GETCWD = @GNULIB_GETCWD@
-GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
-GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
-GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
-GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
-GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
-GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
-GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
-GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
-GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
-GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
-GNULIB_GL_UNISTD_H_GETOPT = @GNULIB_GL_UNISTD_H_GETOPT@
-GNULIB_GRANTPT = @GNULIB_GRANTPT@
-GNULIB_GROUP_MEMBER = @GNULIB_GROUP_MEMBER@
-GNULIB_ISATTY = @GNULIB_ISATTY@
-GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
-GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
-GNULIB_LCHOWN = @GNULIB_LCHOWN@
-GNULIB_LINK = @GNULIB_LINK@
-GNULIB_LINKAT = @GNULIB_LINKAT@
-GNULIB_LSEEK = @GNULIB_LSEEK@
-GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
-GNULIB_MBRLEN = @GNULIB_MBRLEN@
-GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
-GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
-GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
-GNULIB_MBSCHR = @GNULIB_MBSCHR@
-GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
-GNULIB_MBSINIT = @GNULIB_MBSINIT@
-GNULIB_MBSLEN = @GNULIB_MBSLEN@
-GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
-GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
-GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
-GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
-GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
-GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
-GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
-GNULIB_MBSSEP = @GNULIB_MBSSEP@
-GNULIB_MBSSPN = @GNULIB_MBSSPN@
-GNULIB_MBSSTR = @GNULIB_MBSSTR@
-GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
-GNULIB_MBTOWC = @GNULIB_MBTOWC@
-GNULIB_MEMCHR = @GNULIB_MEMCHR@
-GNULIB_MEMMEM = @GNULIB_MEMMEM@
-GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
-GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
-GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
-GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
-GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
-GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
-GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
-GNULIB_PIPE = @GNULIB_PIPE@
-GNULIB_PIPE2 = @GNULIB_PIPE2@
-GNULIB_POSIX_OPENPT = @GNULIB_POSIX_OPENPT@
-GNULIB_PREAD = @GNULIB_PREAD@
-GNULIB_PTSNAME = @GNULIB_PTSNAME@
-GNULIB_PTSNAME_R = @GNULIB_PTSNAME_R@
-GNULIB_PUTENV = @GNULIB_PUTENV@
-GNULIB_PWRITE = @GNULIB_PWRITE@
-GNULIB_RANDOM = @GNULIB_RANDOM@
-GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
-GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
-GNULIB_READ = @GNULIB_READ@
-GNULIB_READLINK = @GNULIB_READLINK@
-GNULIB_READLINKAT = @GNULIB_READLINKAT@
-GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
-GNULIB_REALPATH = @GNULIB_REALPATH@
-GNULIB_RMDIR = @GNULIB_RMDIR@
-GNULIB_RPMATCH = @GNULIB_RPMATCH@
-GNULIB_SETENV = @GNULIB_SETENV@
-GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
-GNULIB_SLEEP = @GNULIB_SLEEP@
-GNULIB_STPCPY = @GNULIB_STPCPY@
-GNULIB_STPNCPY = @GNULIB_STPNCPY@
-GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
-GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
-GNULIB_STRDUP = @GNULIB_STRDUP@
-GNULIB_STRERROR = @GNULIB_STRERROR@
-GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
-GNULIB_STRNCAT = @GNULIB_STRNCAT@
-GNULIB_STRNDUP = @GNULIB_STRNDUP@
-GNULIB_STRNLEN = @GNULIB_STRNLEN@
-GNULIB_STRPBRK = @GNULIB_STRPBRK@
-GNULIB_STRSEP = @GNULIB_STRSEP@
-GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
-GNULIB_STRSTR = @GNULIB_STRSTR@
-GNULIB_STRTOD = @GNULIB_STRTOD@
-GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
-GNULIB_STRTOLL = @GNULIB_STRTOLL@
-GNULIB_STRTOULL = @GNULIB_STRTOULL@
-GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
-GNULIB_SYMLINK = @GNULIB_SYMLINK@
-GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
-GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
-GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
-GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
-GNULIB_UNISTD_H_NONBLOCKING = @GNULIB_UNISTD_H_NONBLOCKING@
-GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
-GNULIB_UNLINK = @GNULIB_UNLINK@
-GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
-GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
-GNULIB_UNSETENV = @GNULIB_UNSETENV@
-GNULIB_USLEEP = @GNULIB_USLEEP@
-GNULIB_WCPCPY = @GNULIB_WCPCPY@
-GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
-GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
-GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
-GNULIB_WCSCAT = @GNULIB_WCSCAT@
-GNULIB_WCSCHR = @GNULIB_WCSCHR@
-GNULIB_WCSCMP = @GNULIB_WCSCMP@
-GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
-GNULIB_WCSCPY = @GNULIB_WCSCPY@
-GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
-GNULIB_WCSDUP = @GNULIB_WCSDUP@
-GNULIB_WCSLEN = @GNULIB_WCSLEN@
-GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
-GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
-GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
-GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
-GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
-GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
-GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
-GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
-GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
-GNULIB_WCSSPN = @GNULIB_WCSSPN@
-GNULIB_WCSSTR = @GNULIB_WCSSTR@
-GNULIB_WCSTOK = @GNULIB_WCSTOK@
-GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
-GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
-GNULIB_WCTOB = @GNULIB_WCTOB@
-GNULIB_WCTOMB = @GNULIB_WCTOMB@
-GNULIB_WCTRANS = @GNULIB_WCTRANS@
-GNULIB_WCTYPE = @GNULIB_WCTYPE@
-GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
-GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
-GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
-GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
-GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
-GNULIB_WMEMSET = @GNULIB_WMEMSET@
-GNULIB_WRITE = @GNULIB_WRITE@
-GNULIB__EXIT = @GNULIB__EXIT@
-GREP = @GREP@
-HAVE_ATOLL = @HAVE_ATOLL@
-HAVE_BTOWC = @HAVE_BTOWC@
-HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
-HAVE_CHOWN = @HAVE_CHOWN@
-HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
-HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
-HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
-HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
-HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
-HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
-HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
-HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
-HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
-HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
-HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
-HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
-HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
-HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
-HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
-HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
-HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
-HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
-HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
-HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
-HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
-HAVE_DUP2 = @HAVE_DUP2@
-HAVE_DUP3 = @HAVE_DUP3@
-HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
-HAVE_FACCESSAT = @HAVE_FACCESSAT@
-HAVE_FCHDIR = @HAVE_FCHDIR@
-HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
-HAVE_FDATASYNC = @HAVE_FDATASYNC@
-HAVE_FEATURES_H = @HAVE_FEATURES_H@
-HAVE_FFSL = @HAVE_FFSL@
-HAVE_FFSLL = @HAVE_FFSLL@
-HAVE_FSYNC = @HAVE_FSYNC@
-HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
-HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
-HAVE_GETGROUPS = @HAVE_GETGROUPS@
-HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
-HAVE_GETLOGIN = @HAVE_GETLOGIN@
-HAVE_GETOPT_H = @HAVE_GETOPT_H@
-HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
-HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
-HAVE_GRANTPT = @HAVE_GRANTPT@
-HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
-HAVE_ISWBLANK = @HAVE_ISWBLANK@
-HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
-HAVE_LCHOWN = @HAVE_LCHOWN@
-HAVE_LINK = @HAVE_LINK@
-HAVE_LINKAT = @HAVE_LINKAT@
-HAVE_MBRLEN = @HAVE_MBRLEN@
-HAVE_MBRTOWC = @HAVE_MBRTOWC@
-HAVE_MBSINIT = @HAVE_MBSINIT@
-HAVE_MBSLEN = @HAVE_MBSLEN@
-HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
-HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
-HAVE_MEMCHR = @HAVE_MEMCHR@
-HAVE_MEMPCPY = @HAVE_MEMPCPY@
-HAVE_MKDTEMP = @HAVE_MKDTEMP@
-HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
-HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
-HAVE_MKSTEMP = @HAVE_MKSTEMP@
-HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
-HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
-HAVE_OS_H = @HAVE_OS_H@
-HAVE_PIPE = @HAVE_PIPE@
-HAVE_PIPE2 = @HAVE_PIPE2@
-HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
-HAVE_PREAD = @HAVE_PREAD@
-HAVE_PTSNAME = @HAVE_PTSNAME@
-HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
-HAVE_PWRITE = @HAVE_PWRITE@
-HAVE_RANDOM = @HAVE_RANDOM@
-HAVE_RANDOM_H = @HAVE_RANDOM_H@
-HAVE_RANDOM_R = @HAVE_RANDOM_R@
-HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
-HAVE_READLINK = @HAVE_READLINK@
-HAVE_READLINKAT = @HAVE_READLINKAT@
-HAVE_REALPATH = @HAVE_REALPATH@
-HAVE_RPMATCH = @HAVE_RPMATCH@
-HAVE_SETENV = @HAVE_SETENV@
-HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
-HAVE_SLEEP = @HAVE_SLEEP@
-HAVE_STPCPY = @HAVE_STPCPY@
-HAVE_STPNCPY = @HAVE_STPNCPY@
-HAVE_STRCASESTR = @HAVE_STRCASESTR@
-HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
-HAVE_STRPBRK = @HAVE_STRPBRK@
-HAVE_STRSEP = @HAVE_STRSEP@
-HAVE_STRTOD = @HAVE_STRTOD@
-HAVE_STRTOLL = @HAVE_STRTOLL@
-HAVE_STRTOULL = @HAVE_STRTOULL@
-HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
-HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
-HAVE_SYMLINK = @HAVE_SYMLINK@
-HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
-HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
-HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
-HAVE_UNISTD_H = @HAVE_UNISTD_H@
-HAVE_UNLINKAT = @HAVE_UNLINKAT@
-HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
-HAVE_USLEEP = @HAVE_USLEEP@
-HAVE_WCHAR_H = @HAVE_WCHAR_H@
-HAVE_WCHAR_T = @HAVE_WCHAR_T@
-HAVE_WCPCPY = @HAVE_WCPCPY@
-HAVE_WCPNCPY = @HAVE_WCPNCPY@
-HAVE_WCRTOMB = @HAVE_WCRTOMB@
-HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
-HAVE_WCSCAT = @HAVE_WCSCAT@
-HAVE_WCSCHR = @HAVE_WCSCHR@
-HAVE_WCSCMP = @HAVE_WCSCMP@
-HAVE_WCSCOLL = @HAVE_WCSCOLL@
-HAVE_WCSCPY = @HAVE_WCSCPY@
-HAVE_WCSCSPN = @HAVE_WCSCSPN@
-HAVE_WCSDUP = @HAVE_WCSDUP@
-HAVE_WCSLEN = @HAVE_WCSLEN@
-HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
-HAVE_WCSNCAT = @HAVE_WCSNCAT@
-HAVE_WCSNCMP = @HAVE_WCSNCMP@
-HAVE_WCSNCPY = @HAVE_WCSNCPY@
-HAVE_WCSNLEN = @HAVE_WCSNLEN@
-HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
-HAVE_WCSPBRK = @HAVE_WCSPBRK@
-HAVE_WCSRCHR = @HAVE_WCSRCHR@
-HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
-HAVE_WCSSPN = @HAVE_WCSSPN@
-HAVE_WCSSTR = @HAVE_WCSSTR@
-HAVE_WCSTOK = @HAVE_WCSTOK@
-HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
-HAVE_WCSXFRM = @HAVE_WCSXFRM@
-HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
-HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
-HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
-HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
-HAVE_WINT_T = @HAVE_WINT_T@
-HAVE_WMEMCHR = @HAVE_WMEMCHR@
-HAVE_WMEMCMP = @HAVE_WMEMCMP@
-HAVE_WMEMCPY = @HAVE_WMEMCPY@
-HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
-HAVE_WMEMSET = @HAVE_WMEMSET@
-HAVE__BOOL = @HAVE__BOOL@
-HAVE__EXIT = @HAVE__EXIT@
-HELP2MAN = @HELP2MAN@
-INCLUDE_NEXT = @INCLUDE_NEXT@
-INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBHELLO_LIBDEPS = @LIBHELLO_LIBDEPS@
-LIBHELLO_LTLIBDEPS = @LIBHELLO_LTLIBDEPS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
-LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
-LOCALE_JA = @LOCALE_JA@
-LOCALE_ZH_CN = @LOCALE_ZH_CN@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
-NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
-NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
-NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
-NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
-NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
-NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
-NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
-NEXT_ERRNO_H = @NEXT_ERRNO_H@
-NEXT_GETOPT_H = @NEXT_GETOPT_H@
-NEXT_STDDEF_H = @NEXT_STDDEF_H@
-NEXT_STDLIB_H = @NEXT_STDLIB_H@
-NEXT_STRING_H = @NEXT_STRING_H@
-NEXT_UNISTD_H = @NEXT_UNISTD_H@
-NEXT_WCHAR_H = @NEXT_WCHAR_H@
-NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
-PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
-RANLIB = @RANLIB@
-REPLACE_BTOWC = @REPLACE_BTOWC@
-REPLACE_CALLOC = @REPLACE_CALLOC@
-REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
-REPLACE_CHOWN = @REPLACE_CHOWN@
-REPLACE_CLOSE = @REPLACE_CLOSE@
-REPLACE_DUP = @REPLACE_DUP@
-REPLACE_DUP2 = @REPLACE_DUP2@
-REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
-REPLACE_GETCWD = @REPLACE_GETCWD@
-REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
-REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
-REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
-REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
-REPLACE_ISATTY = @REPLACE_ISATTY@
-REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
-REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
-REPLACE_LCHOWN = @REPLACE_LCHOWN@
-REPLACE_LINK = @REPLACE_LINK@
-REPLACE_LINKAT = @REPLACE_LINKAT@
-REPLACE_LSEEK = @REPLACE_LSEEK@
-REPLACE_MALLOC = @REPLACE_MALLOC@
-REPLACE_MBRLEN = @REPLACE_MBRLEN@
-REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
-REPLACE_MBSINIT = @REPLACE_MBSINIT@
-REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
-REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
-REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
-REPLACE_MBTOWC = @REPLACE_MBTOWC@
-REPLACE_MEMCHR = @REPLACE_MEMCHR@
-REPLACE_MEMMEM = @REPLACE_MEMMEM@
-REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
-REPLACE_NULL = @REPLACE_NULL@
-REPLACE_PREAD = @REPLACE_PREAD@
-REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
-REPLACE_PUTENV = @REPLACE_PUTENV@
-REPLACE_PWRITE = @REPLACE_PWRITE@
-REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
-REPLACE_READ = @REPLACE_READ@
-REPLACE_READLINK = @REPLACE_READLINK@
-REPLACE_REALLOC = @REPLACE_REALLOC@
-REPLACE_REALPATH = @REPLACE_REALPATH@
-REPLACE_RMDIR = @REPLACE_RMDIR@
-REPLACE_SETENV = @REPLACE_SETENV@
-REPLACE_SLEEP = @REPLACE_SLEEP@
-REPLACE_STPNCPY = @REPLACE_STPNCPY@
-REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
-REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
-REPLACE_STRDUP = @REPLACE_STRDUP@
-REPLACE_STRERROR = @REPLACE_STRERROR@
-REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
-REPLACE_STRNCAT = @REPLACE_STRNCAT@
-REPLACE_STRNDUP = @REPLACE_STRNDUP@
-REPLACE_STRNLEN = @REPLACE_STRNLEN@
-REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
-REPLACE_STRSTR = @REPLACE_STRSTR@
-REPLACE_STRTOD = @REPLACE_STRTOD@
-REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
-REPLACE_SYMLINK = @REPLACE_SYMLINK@
-REPLACE_TOWLOWER = @REPLACE_TOWLOWER@
-REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
-REPLACE_UNLINK = @REPLACE_UNLINK@
-REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
-REPLACE_UNSETENV = @REPLACE_UNSETENV@
-REPLACE_USLEEP = @REPLACE_USLEEP@
-REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
-REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
-REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
-REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
-REPLACE_WCTOB = @REPLACE_WCTOB@
-REPLACE_WCTOMB = @REPLACE_WCTOMB@
-REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
-REPLACE_WRITE = @REPLACE_WRITE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STDBOOL_H = @STDBOOL_H@
-STDDEF_H = @STDDEF_H@
-STRIP = @STRIP@
-UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
-UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
-UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gl_LIBOBJS = @gl_LIBOBJS@
-gl_LTLIBOBJS = @gl_LTLIBOBJS@
-gltests_LIBOBJS = @gltests_LIBOBJS@
-gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
-gltests_WITNESS = @gltests_WITNESS@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-lispdir = @lispdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-info_TEXINFOS = hello.texi
-hello_TEXINFOS = fdl.texi
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texi
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-.texi.info:
- restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && $(am__cd) $(srcdir) && \
- rm -rf $$backupdir && mkdir $$backupdir && \
- if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
- for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
- if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
- done; \
- else :; fi && \
- cd "$$am__cwd"; \
- if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
- then \
- rc=0; \
- $(am__cd) $(srcdir); \
- else \
- rc=$$?; \
- $(am__cd) $(srcdir) && \
- $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
- fi; \
- rm -rf $$backupdir; exit $$rc
-
-.texi.dvi:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $<
-
-.texi.pdf:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $<
-
-.texi.html:
- rm -rf $(@:.html=.htp)
- if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) $<; \
- then \
- rm -rf $@; \
- if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
- mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
- else \
- if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
- rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
- exit 1; \
- fi
-$(srcdir)/hello.info: hello.texi $(srcdir)/version.texi $(hello_TEXINFOS)
-hello.dvi: hello.texi $(srcdir)/version.texi $(hello_TEXINFOS)
-hello.pdf: hello.texi $(srcdir)/version.texi $(hello_TEXINFOS)
-hello.html: hello.texi $(srcdir)/version.texi $(hello_TEXINFOS)
-$(srcdir)/version.texi: $(srcdir)/stamp-vti
-$(srcdir)/stamp-vti: hello.texi $(top_srcdir)/configure
- @(dir=.; test -f ./hello.texi || dir=$(srcdir); \
- set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/hello.texi`; \
- echo "@set UPDATED $$1 $$2 $$3"; \
- echo "@set UPDATED-MONTH $$2 $$3"; \
- echo "@set EDITION $(VERSION)"; \
- echo "@set VERSION $(VERSION)") > vti.tmp
- @cmp -s vti.tmp $(srcdir)/version.texi \
- || (echo "Updating $(srcdir)/version.texi"; \
- cp vti.tmp $(srcdir)/version.texi)
- -@rm -f vti.tmp
- @cp $(srcdir)/version.texi $@
-
-mostlyclean-vti:
- -rm -f vti.tmp
-
-maintainer-clean-vti:
- -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
-.dvi.ps:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- $(DVIPS) -o $@ $<
-
-uninstall-dvi-am:
- @$(NORMAL_UNINSTALL)
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
- rm -f "$(DESTDIR)$(dvidir)/$$f"; \
- done
-
-uninstall-html-am:
- @$(NORMAL_UNINSTALL)
- @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
- rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
- done
-
-uninstall-info-am:
- @$(PRE_UNINSTALL)
- @if test -d '$(DESTDIR)$(infodir)' && \
- (install-info --version && \
- install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
- if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
- then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
- done; \
- else :; fi
- @$(NORMAL_UNINSTALL)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
- (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
- echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
- rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
- else :; fi); \
- done
-
-uninstall-pdf-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-uninstall-ps-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
- rm -f "$(DESTDIR)$(psdir)/$$f"; \
- done
-
-dist-info: $(INFO_DEPS)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
- for base in $$list; do \
- case $$base in \
- $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
- base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
- for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
- if test -f $$file; then \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f "$(distdir)/$$relfile" || \
- cp -p $$file "$(distdir)/$$relfile"; \
- else :; fi; \
- done; \
- done
-
-mostlyclean-aminfo:
- -rm -rf hello.aux hello.cp hello.cps hello.fn hello.fns hello.ky hello.kys \
- hello.log hello.op hello.pg hello.pgs hello.tmp hello.toc \
- hello.tp hello.tps hello.vr hello.vrs
-
-clean-aminfo:
- -test -z "hello.dvi hello.pdf hello.ps hello.html" \
- || rm -rf hello.dvi hello.pdf hello.ps hello.html
-
-maintainer-clean-aminfo:
- @list='$(INFO_DEPS)'; for i in $$list; do \
- i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
- echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
- rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-info
-check-am: all-am
-check: check-am
-all-am: Makefile $(INFO_DEPS)
-installdirs:
- for dir in "$(DESTDIR)$(infodir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-aminfo clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am: $(DVIS)
-
-html: html-am
-
-html-am: $(HTMLS)
-
-info: info-am
-
-info-am: $(INFO_DEPS)
-
-install-data-am: install-info-am
-
-install-dvi: install-dvi-am
-
-install-dvi-am: $(DVIS)
- @$(NORMAL_INSTALL)
- test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
- done
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
- @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
- for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- d2=$$d$$p; \
- if test -d "$$d2"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
- else \
- list2="$$list2 $$d2"; \
- fi; \
- done; \
- test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
- done; }
-install-info: install-info-am
-
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
- for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
- $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
- if test -f $$ifile; then \
- echo "$$ifile"; \
- else : ; fi; \
- done; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
- @$(POST_INSTALL)
- @am__run_installinfo=yes; \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) am__run_installinfo=no;; \
- *) (install-info --version) >/dev/null 2>&1 \
- || am__run_installinfo=no;; \
- esac; \
- if test $$am__run_installinfo = yes; then \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
- install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
- done; \
- else : ; fi
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
-install-ps: install-ps-am
-
-install-ps-am: $(PSS)
- @$(NORMAL_INSTALL)
- test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
- maintainer-clean-generic maintainer-clean-vti
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
-
-pdf: pdf-am
-
-pdf-am: $(PDFS)
-
-ps: ps-am
-
-ps-am: $(PSS)
-
-uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
- uninstall-pdf-am uninstall-ps-am
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
- dist-info distclean distclean-generic distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-aminfo maintainer-clean-generic \
- maintainer-clean-vti mostlyclean mostlyclean-aminfo \
- mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
- uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
- uninstall-info-am uninstall-pdf-am uninstall-ps-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-@c The GNU Free Documentation License.
-@center Version 1.3, 3 November 2008
-
-@c This file is intended to be included within another document,
-@c hence no sectioning command or @node.
-
-@display
-Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
-@uref{http://fsf.org/}
-
-Everyone is permitted to copy and distribute verbatim copies
-of this license document, but changing it is not allowed.
-@end display
-
-@enumerate 0
-@item
-PREAMBLE
-
-The purpose of this License is to make a manual, textbook, or other
-functional and useful document @dfn{free} in the sense of freedom: to
-assure everyone the effective freedom to copy and redistribute it,
-with or without modifying it, either commercially or noncommercially.
-Secondarily, this License preserves for the author and publisher a way
-to get credit for their work, while not being considered responsible
-for modifications made by others.
-
-This License is a kind of ``copyleft'', which means that derivative
-works of the document must themselves be free in the same sense. It
-complements the GNU General Public License, which is a copyleft
-license designed for free software.
-
-We have designed this License in order to use it for manuals for free
-software, because free software needs free documentation: a free
-program should come with manuals providing the same freedoms that the
-software does. But this License is not limited to software manuals;
-it can be used for any textual work, regardless of subject matter or
-whether it is published as a printed book. We recommend this License
-principally for works whose purpose is instruction or reference.
-
-@item
-APPLICABILITY AND DEFINITIONS
-
-This License applies to any manual or other work, in any medium, that
-contains a notice placed by the copyright holder saying it can be
-distributed under the terms of this License. Such a notice grants a
-world-wide, royalty-free license, unlimited in duration, to use that
-work under the conditions stated herein. The ``Document'', below,
-refers to any such manual or work. Any member of the public is a
-licensee, and is addressed as ``you''. You accept the license if you
-copy, modify or distribute the work in a way requiring permission
-under copyright law.
-
-A ``Modified Version'' of the Document means any work containing the
-Document or a portion of it, either copied verbatim, or with
-modifications and/or translated into another language.
-
-A ``Secondary Section'' is a named appendix or a front-matter section
-of the Document that deals exclusively with the relationship of the
-publishers or authors of the Document to the Document's overall
-subject (or to related matters) and contains nothing that could fall
-directly within that overall subject. (Thus, if the Document is in
-part a textbook of mathematics, a Secondary Section may not explain
-any mathematics.) The relationship could be a matter of historical
-connection with the subject or with related matters, or of legal,
-commercial, philosophical, ethical or political position regarding
-them.
-
-The ``Invariant Sections'' are certain Secondary Sections whose titles
-are designated, as being those of Invariant Sections, in the notice
-that says that the Document is released under this License. If a
-section does not fit the above definition of Secondary then it is not
-allowed to be designated as Invariant. The Document may contain zero
-Invariant Sections. If the Document does not identify any Invariant
-Sections then there are none.
-
-The ``Cover Texts'' are certain short passages of text that are listed,
-as Front-Cover Texts or Back-Cover Texts, in the notice that says that
-the Document is released under this License. A Front-Cover Text may
-be at most 5 words, and a Back-Cover Text may be at most 25 words.
-
-A ``Transparent'' copy of the Document means a machine-readable copy,
-represented in a format whose specification is available to the
-general public, that is suitable for revising the document
-straightforwardly with generic text editors or (for images composed of
-pixels) generic paint programs or (for drawings) some widely available
-drawing editor, and that is suitable for input to text formatters or
-for automatic translation to a variety of formats suitable for input
-to text formatters. A copy made in an otherwise Transparent file
-format whose markup, or absence of markup, has been arranged to thwart
-or discourage subsequent modification by readers is not Transparent.
-An image format is not Transparent if used for any substantial amount
-of text. A copy that is not ``Transparent'' is called ``Opaque''.
-
-Examples of suitable formats for Transparent copies include plain
-ASCII without markup, Texinfo input format, La@TeX{} input
-format, SGML or XML using a publicly available
-DTD, and standard-conforming simple HTML,
-PostScript or PDF designed for human modification. Examples
-of transparent image formats include PNG, XCF and
-JPG. Opaque formats include proprietary formats that can be
-read and edited only by proprietary word processors, SGML or
-XML for which the DTD and/or processing tools are
-not generally available, and the machine-generated HTML,
-PostScript or PDF produced by some word processors for
-output purposes only.
-
-The ``Title Page'' means, for a printed book, the title page itself,
-plus such following pages as are needed to hold, legibly, the material
-this License requires to appear in the title page. For works in
-formats which do not have any title page as such, ``Title Page'' means
-the text near the most prominent appearance of the work's title,
-preceding the beginning of the body of the text.
-
-The ``publisher'' means any person or entity that distributes copies
-of the Document to the public.
-
-A section ``Entitled XYZ'' means a named subunit of the Document whose
-title either is precisely XYZ or contains XYZ in parentheses following
-text that translates XYZ in another language. (Here XYZ stands for a
-specific section name mentioned below, such as ``Acknowledgements'',
-``Dedications'', ``Endorsements'', or ``History''.) To ``Preserve the Title''
-of such a section when you modify the Document means that it remains a
-section ``Entitled XYZ'' according to this definition.
-
-The Document may include Warranty Disclaimers next to the notice which
-states that this License applies to the Document. These Warranty
-Disclaimers are considered to be included by reference in this
-License, but only as regards disclaiming warranties: any other
-implication that these Warranty Disclaimers may have is void and has
-no effect on the meaning of this License.
-
-@item
-VERBATIM COPYING
-
-You may copy and distribute the Document in any medium, either
-commercially or noncommercially, provided that this License, the
-copyright notices, and the license notice saying this License applies
-to the Document are reproduced in all copies, and that you add no other
-conditions whatsoever to those of this License. You may not use
-technical measures to obstruct or control the reading or further
-copying of the copies you make or distribute. However, you may accept
-compensation in exchange for copies. If you distribute a large enough
-number of copies you must also follow the conditions in section 3.
-
-You may also lend copies, under the same conditions stated above, and
-you may publicly display copies.
-
-@item
-COPYING IN QUANTITY
-
-If you publish printed copies (or copies in media that commonly have
-printed covers) of the Document, numbering more than 100, and the
-Document's license notice requires Cover Texts, you must enclose the
-copies in covers that carry, clearly and legibly, all these Cover
-Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
-the back cover. Both covers must also clearly and legibly identify
-you as the publisher of these copies. The front cover must present
-the full title with all words of the title equally prominent and
-visible. You may add other material on the covers in addition.
-Copying with changes limited to the covers, as long as they preserve
-the title of the Document and satisfy these conditions, can be treated
-as verbatim copying in other respects.
-
-If the required texts for either cover are too voluminous to fit
-legibly, you should put the first ones listed (as many as fit
-reasonably) on the actual cover, and continue the rest onto adjacent
-pages.
-
-If you publish or distribute Opaque copies of the Document numbering
-more than 100, you must either include a machine-readable Transparent
-copy along with each Opaque copy, or state in or with each Opaque copy
-a computer-network location from which the general network-using
-public has access to download using public-standard network protocols
-a complete Transparent copy of the Document, free of added material.
-If you use the latter option, you must take reasonably prudent steps,
-when you begin distribution of Opaque copies in quantity, to ensure
-that this Transparent copy will remain thus accessible at the stated
-location until at least one year after the last time you distribute an
-Opaque copy (directly or through your agents or retailers) of that
-edition to the public.
-
-It is requested, but not required, that you contact the authors of the
-Document well before redistributing any large number of copies, to give
-them a chance to provide you with an updated version of the Document.
-
-@item
-MODIFICATIONS
-
-You may copy and distribute a Modified Version of the Document under
-the conditions of sections 2 and 3 above, provided that you release
-the Modified Version under precisely this License, with the Modified
-Version filling the role of the Document, thus licensing distribution
-and modification of the Modified Version to whoever possesses a copy
-of it. In addition, you must do these things in the Modified Version:
-
-@enumerate A
-@item
-Use in the Title Page (and on the covers, if any) a title distinct
-from that of the Document, and from those of previous versions
-(which should, if there were any, be listed in the History section
-of the Document). You may use the same title as a previous version
-if the original publisher of that version gives permission.
-
-@item
-List on the Title Page, as authors, one or more persons or entities
-responsible for authorship of the modifications in the Modified
-Version, together with at least five of the principal authors of the
-Document (all of its principal authors, if it has fewer than five),
-unless they release you from this requirement.
-
-@item
-State on the Title page the name of the publisher of the
-Modified Version, as the publisher.
-
-@item
-Preserve all the copyright notices of the Document.
-
-@item
-Add an appropriate copyright notice for your modifications
-adjacent to the other copyright notices.
-
-@item
-Include, immediately after the copyright notices, a license notice
-giving the public permission to use the Modified Version under the
-terms of this License, in the form shown in the Addendum below.
-
-@item
-Preserve in that license notice the full lists of Invariant Sections
-and required Cover Texts given in the Document's license notice.
-
-@item
-Include an unaltered copy of this License.
-
-@item
-Preserve the section Entitled ``History'', Preserve its Title, and add
-to it an item stating at least the title, year, new authors, and
-publisher of the Modified Version as given on the Title Page. If
-there is no section Entitled ``History'' in the Document, create one
-stating the title, year, authors, and publisher of the Document as
-given on its Title Page, then add an item describing the Modified
-Version as stated in the previous sentence.
-
-@item
-Preserve the network location, if any, given in the Document for
-public access to a Transparent copy of the Document, and likewise
-the network locations given in the Document for previous versions
-it was based on. These may be placed in the ``History'' section.
-You may omit a network location for a work that was published at
-least four years before the Document itself, or if the original
-publisher of the version it refers to gives permission.
-
-@item
-For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve
-the Title of the section, and preserve in the section all the
-substance and tone of each of the contributor acknowledgements and/or
-dedications given therein.
-
-@item
-Preserve all the Invariant Sections of the Document,
-unaltered in their text and in their titles. Section numbers
-or the equivalent are not considered part of the section titles.
-
-@item
-Delete any section Entitled ``Endorsements''. Such a section
-may not be included in the Modified Version.
-
-@item
-Do not retitle any existing section to be Entitled ``Endorsements'' or
-to conflict in title with any Invariant Section.
-
-@item
-Preserve any Warranty Disclaimers.
-@end enumerate
-
-If the Modified Version includes new front-matter sections or
-appendices that qualify as Secondary Sections and contain no material
-copied from the Document, you may at your option designate some or all
-of these sections as invariant. To do this, add their titles to the
-list of Invariant Sections in the Modified Version's license notice.
-These titles must be distinct from any other section titles.
-
-You may add a section Entitled ``Endorsements'', provided it contains
-nothing but endorsements of your Modified Version by various
-parties---for example, statements of peer review or that the text has
-been approved by an organization as the authoritative definition of a
-standard.
-
-You may add a passage of up to five words as a Front-Cover Text, and a
-passage of up to 25 words as a Back-Cover Text, to the end of the list
-of Cover Texts in the Modified Version. Only one passage of
-Front-Cover Text and one of Back-Cover Text may be added by (or
-through arrangements made by) any one entity. If the Document already
-includes a cover text for the same cover, previously added by you or
-by arrangement made by the same entity you are acting on behalf of,
-you may not add another; but you may replace the old one, on explicit
-permission from the previous publisher that added the old one.
-
-The author(s) and publisher(s) of the Document do not by this License
-give permission to use their names for publicity for or to assert or
-imply endorsement of any Modified Version.
-
-@item
-COMBINING DOCUMENTS
-
-You may combine the Document with other documents released under this
-License, under the terms defined in section 4 above for modified
-versions, provided that you include in the combination all of the
-Invariant Sections of all of the original documents, unmodified, and
-list them all as Invariant Sections of your combined work in its
-license notice, and that you preserve all their Warranty Disclaimers.
-
-The combined work need only contain one copy of this License, and
-multiple identical Invariant Sections may be replaced with a single
-copy. If there are multiple Invariant Sections with the same name but
-different contents, make the title of each such section unique by
-adding at the end of it, in parentheses, the name of the original
-author or publisher of that section if known, or else a unique number.
-Make the same adjustment to the section titles in the list of
-Invariant Sections in the license notice of the combined work.
-
-In the combination, you must combine any sections Entitled ``History''
-in the various original documents, forming one section Entitled
-``History''; likewise combine any sections Entitled ``Acknowledgements'',
-and any sections Entitled ``Dedications''. You must delete all
-sections Entitled ``Endorsements.''
-
-@item
-COLLECTIONS OF DOCUMENTS
-
-You may make a collection consisting of the Document and other documents
-released under this License, and replace the individual copies of this
-License in the various documents with a single copy that is included in
-the collection, provided that you follow the rules of this License for
-verbatim copying of each of the documents in all other respects.
-
-You may extract a single document from such a collection, and distribute
-it individually under this License, provided you insert a copy of this
-License into the extracted document, and follow this License in all
-other respects regarding verbatim copying of that document.
-
-@item
-AGGREGATION WITH INDEPENDENT WORKS
-
-A compilation of the Document or its derivatives with other separate
-and independent documents or works, in or on a volume of a storage or
-distribution medium, is called an ``aggregate'' if the copyright
-resulting from the compilation is not used to limit the legal rights
-of the compilation's users beyond what the individual works permit.
-When the Document is included in an aggregate, this License does not
-apply to the other works in the aggregate which are not themselves
-derivative works of the Document.
-
-If the Cover Text requirement of section 3 is applicable to these
-copies of the Document, then if the Document is less than one half of
-the entire aggregate, the Document's Cover Texts may be placed on
-covers that bracket the Document within the aggregate, or the
-electronic equivalent of covers if the Document is in electronic form.
-Otherwise they must appear on printed covers that bracket the whole
-aggregate.
-
-@item
-TRANSLATION
-
-Translation is considered a kind of modification, so you may
-distribute translations of the Document under the terms of section 4.
-Replacing Invariant Sections with translations requires special
-permission from their copyright holders, but you may include
-translations of some or all Invariant Sections in addition to the
-original versions of these Invariant Sections. You may include a
-translation of this License, and all the license notices in the
-Document, and any Warranty Disclaimers, provided that you also include
-the original English version of this License and the original versions
-of those notices and disclaimers. In case of a disagreement between
-the translation and the original version of this License or a notice
-or disclaimer, the original version will prevail.
-
-If a section in the Document is Entitled ``Acknowledgements'',
-``Dedications'', or ``History'', the requirement (section 4) to Preserve
-its Title (section 1) will typically require changing the actual
-title.
-
-@item
-TERMINATION
-
-You may not copy, modify, sublicense, or distribute the Document
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense, or distribute it is void, and
-will automatically terminate your rights under this License.
-
-However, if you cease all violation of this License, then your license
-from a particular copyright holder is reinstated (a) provisionally,
-unless and until the copyright holder explicitly and finally
-terminates your license, and (b) permanently, if the copyright holder
-fails to notify you of the violation by some reasonable means prior to
-60 days after the cessation.
-
-Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License. If your rights have been terminated and not permanently
-reinstated, receipt of a copy of some or all of the same material does
-not give you any rights to use it.
-
-@item
-FUTURE REVISIONS OF THIS LICENSE
-
-The Free Software Foundation may publish new, revised versions
-of the GNU Free Documentation License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns. See
-@uref{http://www.gnu.org/copyleft/}.
-
-Each version of the License is given a distinguishing version number.
-If the Document specifies that a particular numbered version of this
-License ``or any later version'' applies to it, you have the option of
-following the terms and conditions either of that specified version or
-of any later version that has been published (not as a draft) by the
-Free Software Foundation. If the Document does not specify a version
-number of this License, you may choose any version ever published (not
-as a draft) by the Free Software Foundation. If the Document
-specifies that a proxy can decide which future versions of this
-License can be used, that proxy's public statement of acceptance of a
-version permanently authorizes you to choose that version for the
-Document.
-
-@item
-RELICENSING
-
-``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any
-World Wide Web server that publishes copyrightable works and also
-provides prominent facilities for anybody to edit those works. A
-public wiki that anybody can edit is an example of such a server. A
-``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the
-site means any set of copyrightable works thus published on the MMC
-site.
-
-``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0
-license published by Creative Commons Corporation, a not-for-profit
-corporation with a principal place of business in San Francisco,
-California, as well as future copyleft versions of that license
-published by that same organization.
-
-``Incorporate'' means to publish or republish a Document, in whole or
-in part, as part of another Document.
-
-An MMC is ``eligible for relicensing'' if it is licensed under this
-License, and if all works that were first published under this License
-somewhere other than this MMC, and subsequently incorporated in whole
-or in part into the MMC, (1) had no cover texts or invariant sections,
-and (2) were thus incorporated prior to November 1, 2008.
-
-The operator of an MMC Site may republish an MMC contained in the site
-under CC-BY-SA on the same site at any time before August 1, 2009,
-provided the MMC is eligible for relicensing.
-
-@end enumerate
-
-@page
-@heading ADDENDUM: How to use this License for your documents
-
-To use this License in a document you have written, include a copy of
-the License in the document and put the following copyright and
-license notices just after the title page:
-
-@smallexample
-@group
- Copyright (C) @var{year} @var{your name}.
- Permission is granted to copy, distribute and/or modify this document
- under the terms of the GNU Free Documentation License, Version 1.3
- or any later version published by the Free Software Foundation;
- with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
- Texts. A copy of the license is included in the section entitled ``GNU
- Free Documentation License''.
-@end group
-@end smallexample
-
-If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
-replace the ``with@dots{}Texts.''@: line with this:
-
-@smallexample
-@group
- with the Invariant Sections being @var{list their titles}, with
- the Front-Cover Texts being @var{list}, and with the Back-Cover Texts
- being @var{list}.
-@end group
-@end smallexample
-
-If you have Invariant Sections without Cover Texts, or some other
-combination of the three, merge those two alternatives to suit the
-situation.
-
-If your document contains nontrivial examples of program code, we
-recommend releasing these examples in parallel under your choice of
-free software license, such as the GNU General Public License,
-to permit their use in free software.
-
-@c Local Variables:
-@c ispell-local-pdict: "ispell-dict"
-@c End:
+++ /dev/null
-This is hello.info, produced by makeinfo version 4.13 from hello.texi.
-
-This manual is for GNU Hello (version 2.8, 19 April 2012), which prints
-a friendly greeting (and serves as an example GNU package).
-
- Copyright (C) 1992, 1993, 1996, 2002, 2005-2012 Free Software
-Foundation, Inc.
-
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.3 or any later version published by the Free Software
- Foundation; with no Invariant Sections, with no Front-Cover Texts,
- and with no Back-Cover Texts. A copy of the license is included
- in the section entitled "GNU Free Documentation License".
-
-INFO-DIR-SECTION Basics
-START-INFO-DIR-ENTRY
-* Hello: (hello). Hello, GNU world.
-END-INFO-DIR-ENTRY
-
-\1f
-File: hello.info, Node: Top, Next: Overview, Up: (dir)
-
-GNU Hello
-*********
-
-This manual is for GNU Hello (version 2.8, 19 April 2012), which prints
-a friendly greeting (and serves as an example GNU package).
-
-* Menu:
-
-* Overview:: General purpose and information.
-* Sample output:: Sample output from `hello'.
-* Invoking hello:: How to run `hello'.
-* Reporting bugs:: Sending bug reports and feature suggestions.
-* GNU Free Documentation License:: Copying and sharing this documentation.
-* Concept index:: Index of concepts.
-
-\1f
-File: hello.info, Node: Overview, Next: Sample output, Prev: Top, Up: Top
-
-1 Overview
-**********
-
-The GNU `hello' program (`http://www.gnu.org/software/hello/') produces
-a familiar, friendly greeting. It allows nonprogrammers to use a
-classic computer science tool which would otherwise be unavailable to
-them. Because it is protected by the GNU General Public License, users
-are free (in perpetuity) to share and change it.
-
- Not to spoil the joke, but of course the practical purpose of GNU
-Hello is to serve as a minimal example of a GNU package. So, although
-most manuals don't need to discuss the implementation of the programs
-they document, that is part of the goal here.
-
- First, GNU Hello follows the GNU coding standards (*note Preface:
-(standards)Top.) and GNU maintainer standards (*note Preface:
-(maintain)Top.). These are the basic documents which all GNU packages
-should adhere to.
-
- The Hello package also implements recommended development practices
-not embodied in the standards, using other GNU packages and features:
-
- * It uses Automake (*note Introduction: (automake)Top.) and hence
- also Autoconf (*note Introduction: (autoconf)Top.) for
- configuration.
-
- * It uses Gnulib (*note Introduction: (gnulib)Top.) to enhance
- portability and avoid duplication of common sources. Both
- `gnulib-tool' and `srclist-update' are used, for purposes of
- example. See the `README-dev' file in the distribution.
-
- * GNU Gettext (*note Introduction: (gettext)Top.) is used for
- internationalization support. Hello's greeting has been translated
- into many languages.
-
- * Internally, Hello uses the GNU `getopt_long' function (*note
- Getopt Long Options: (libc)Getopt Long Options.) to parse options,
- thus supporting GNU-style long options such as `--help'.
-
- * The Hello Man page is generated with GNU `help2man' (*note
- Overview: (help2man)Top.) from the `--help' output. This relieves
- the maintainers from the burden of updating separate man
- documentation, yet provides a reasonable overview for man devotees.
-
- * Finally, Texinfo (*note Introduction: (texinfo)Top.) is the
- documentation format for this manual. It supports output in Info,
- HTML, PDF, DVI, plain text, XML, and other formats.
-
-
- GNU Hello is implemented in C. The GNU Gettext distribution contains
-"hello world" examples in many other programming languages; see the
-Gettext home page at `http://www.gnu.org/software/gettext/'.
-
- The top-level `Makefile.am' in Hello also contains a few special
-targets for other projects to adapt as desired:
-
-`diff'
- Make a diff from the previous release, assuming the current
- tarball is in the current tarball.
-
-`po-check'
- Verify that all source files using `_()' are included for
- translation in `po/POTFILES.in', so translators will have all the
- messages.
-
-`wwwdoc'
- Sample procedure for updating the manual on the GNU web site, in
- this case `http://www.gnu.org/software/hello/manual/'.
-
- GNU Hello was written by Mike Haertel, David MacKenzie, Jan
-Brittenson, Charles Hannum, Roland McGrath, Noah Friedman, Karl
-Eichwalder, Karl Berry, and The King.
-
-\1f
-File: hello.info, Node: Sample output, Next: Invoking hello, Prev: Overview, Up: Top
-
-2 Sample output
-***************
-
-Here are some examples of running GNU Hello.
-
- This is the output of the command `hello':
-
- Hello, world!
-
- This is the output of the command `hello --traditional':
-
- hello, world
-
- This is the output of the command `hello --greeting=hi':
-
- hi
-
-\1f
-File: hello.info, Node: Invoking hello, Next: Reporting bugs, Prev: Sample output, Up: Top
-
-3 Invoking `hello'
-******************
-
-The format for running the `hello' program is:
-
- hello OPTION ...
-
- With no options, `hello' prints the greeting `Hello, world!'.
-
- `hello' supports the following options:
-
-`--greeting=TEXT'
-`-g TEXT'
- Output TEXT instead of the default greeting.
-
-`--help'
-`-h'
- Print an informative help message on standard output and exit
- successfully.
-
- For the `--help' output of GNU programs, it's strongly encouraged
- to include a brief (one or two sentences) description of what the
- program does, as well as the synopsis of how to run the program.
- Any environment variables which affect execution should also be
- mentioned (Hello doesn't have any).
-
-`--next-generation'
-`-n'
- Output `Hello, world!', but possibly including box-drawing
- characters or other fancy stuff, especially in translated locales.
- (If you would like to volunteer to translate messages for GNU
- packages, please see `http://translationproject.org'.)
-
-`--traditional'
-`-t'
- Output the traditional greeting message `hello, world'.
-
-`--version'
-`-v'
- Print the version number and licensing information of Hello on
- standard output and then exit successfully.
-
-
- If more than one of the greeting options (`-g', `-n', `-t', and
-their long-named equivalents) is specified, whichever comes last takes
-precedence.
-
-\1f
-File: hello.info, Node: Reporting bugs, Next: GNU Free Documentation License, Prev: Invoking hello, Up: Top
-
-4 Reporting bugs
-****************
-
-To report bugs, suggest enhancements or otherwise discuss GNU Hello,
-please send electronic mail to <bug-hello@gnu.org>.
-
- For bug reports, please include enough information for the
-maintainers to reproduce the problem. Generally speaking, that means:
-
- * The version numbers of Hello (which you can find by running
- `hello --version') and any other program(s) or manual(s)
- involved.
-
- * Hardware and operating system names and versions.
-
- * The contents of any input files necessary to reproduce the bug.
-
- * The expected behavior and/or output.
-
- * A description of the problem and samples of any erroneous output.
-
- * Options you gave to `configure' other than specifying
- installation directories.
-
- * Anything else that you think would be helpful.
-
- When in doubt whether something is needed or not, include it. It's
-better to include too much than to leave out something important.
-
- Patches are welcome; if possible, please make them with `diff -c'
-(*note Overview: (diff)Top.) and include `ChangeLog' entries (*note
-Change Log: (emacs)Change Log.). Please follow the existing coding
-style.
-
-\1f
-File: hello.info, Node: GNU Free Documentation License, Next: Concept index, Prev: Reporting bugs, Up: Top
-
-Appendix A GNU Free Documentation License
-*****************************************
-
- Version 1.3, 3 November 2008
-
- Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
- `http://fsf.org/'
-
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- 0. PREAMBLE
-
- The purpose of this License is to make a manual, textbook, or other
- functional and useful document "free" in the sense of freedom: to
- assure everyone the effective freedom to copy and redistribute it,
- with or without modifying it, either commercially or
- noncommercially. Secondarily, this License preserves for the
- author and publisher a way to get credit for their work, while not
- being considered responsible for modifications made by others.
-
- This License is a kind of "copyleft", which means that derivative
- works of the document must themselves be free in the same sense.
- It complements the GNU General Public License, which is a copyleft
- license designed for free software.
-
- We have designed this License in order to use it for manuals for
- free software, because free software needs free documentation: a
- free program should come with manuals providing the same freedoms
- that the software does. But this License is not limited to
- software manuals; it can be used for any textual work, regardless
- of subject matter or whether it is published as a printed book.
- We recommend this License principally for works whose purpose is
- instruction or reference.
-
- 1. APPLICABILITY AND DEFINITIONS
-
- This License applies to any manual or other work, in any medium,
- that contains a notice placed by the copyright holder saying it
- can be distributed under the terms of this License. Such a notice
- grants a world-wide, royalty-free license, unlimited in duration,
- to use that work under the conditions stated herein. The
- "Document", below, refers to any such manual or work. Any member
- of the public is a licensee, and is addressed as "you". You
- accept the license if you copy, modify or distribute the work in a
- way requiring permission under copyright law.
-
- A "Modified Version" of the Document means any work containing the
- Document or a portion of it, either copied verbatim, or with
- modifications and/or translated into another language.
-
- A "Secondary Section" is a named appendix or a front-matter section
- of the Document that deals exclusively with the relationship of the
- publishers or authors of the Document to the Document's overall
- subject (or to related matters) and contains nothing that could
- fall directly within that overall subject. (Thus, if the Document
- is in part a textbook of mathematics, a Secondary Section may not
- explain any mathematics.) The relationship could be a matter of
- historical connection with the subject or with related matters, or
- of legal, commercial, philosophical, ethical or political position
- regarding them.
-
- The "Invariant Sections" are certain Secondary Sections whose
- titles are designated, as being those of Invariant Sections, in
- the notice that says that the Document is released under this
- License. If a section does not fit the above definition of
- Secondary then it is not allowed to be designated as Invariant.
- The Document may contain zero Invariant Sections. If the Document
- does not identify any Invariant Sections then there are none.
-
- The "Cover Texts" are certain short passages of text that are
- listed, as Front-Cover Texts or Back-Cover Texts, in the notice
- that says that the Document is released under this License. A
- Front-Cover Text may be at most 5 words, and a Back-Cover Text may
- be at most 25 words.
-
- A "Transparent" copy of the Document means a machine-readable copy,
- represented in a format whose specification is available to the
- general public, that is suitable for revising the document
- straightforwardly with generic text editors or (for images
- composed of pixels) generic paint programs or (for drawings) some
- widely available drawing editor, and that is suitable for input to
- text formatters or for automatic translation to a variety of
- formats suitable for input to text formatters. A copy made in an
- otherwise Transparent file format whose markup, or absence of
- markup, has been arranged to thwart or discourage subsequent
- modification by readers is not Transparent. An image format is
- not Transparent if used for any substantial amount of text. A
- copy that is not "Transparent" is called "Opaque".
-
- Examples of suitable formats for Transparent copies include plain
- ASCII without markup, Texinfo input format, LaTeX input format,
- SGML or XML using a publicly available DTD, and
- standard-conforming simple HTML, PostScript or PDF designed for
- human modification. Examples of transparent image formats include
- PNG, XCF and JPG. Opaque formats include proprietary formats that
- can be read and edited only by proprietary word processors, SGML or
- XML for which the DTD and/or processing tools are not generally
- available, and the machine-generated HTML, PostScript or PDF
- produced by some word processors for output purposes only.
-
- The "Title Page" means, for a printed book, the title page itself,
- plus such following pages as are needed to hold, legibly, the
- material this License requires to appear in the title page. For
- works in formats which do not have any title page as such, "Title
- Page" means the text near the most prominent appearance of the
- work's title, preceding the beginning of the body of the text.
-
- The "publisher" means any person or entity that distributes copies
- of the Document to the public.
-
- A section "Entitled XYZ" means a named subunit of the Document
- whose title either is precisely XYZ or contains XYZ in parentheses
- following text that translates XYZ in another language. (Here XYZ
- stands for a specific section name mentioned below, such as
- "Acknowledgements", "Dedications", "Endorsements", or "History".)
- To "Preserve the Title" of such a section when you modify the
- Document means that it remains a section "Entitled XYZ" according
- to this definition.
-
- The Document may include Warranty Disclaimers next to the notice
- which states that this License applies to the Document. These
- Warranty Disclaimers are considered to be included by reference in
- this License, but only as regards disclaiming warranties: any other
- implication that these Warranty Disclaimers may have is void and
- has no effect on the meaning of this License.
-
- 2. VERBATIM COPYING
-
- You may copy and distribute the Document in any medium, either
- commercially or noncommercially, provided that this License, the
- copyright notices, and the license notice saying this License
- applies to the Document are reproduced in all copies, and that you
- add no other conditions whatsoever to those of this License. You
- may not use technical measures to obstruct or control the reading
- or further copying of the copies you make or distribute. However,
- you may accept compensation in exchange for copies. If you
- distribute a large enough number of copies you must also follow
- the conditions in section 3.
-
- You may also lend copies, under the same conditions stated above,
- and you may publicly display copies.
-
- 3. COPYING IN QUANTITY
-
- If you publish printed copies (or copies in media that commonly
- have printed covers) of the Document, numbering more than 100, and
- the Document's license notice requires Cover Texts, you must
- enclose the copies in covers that carry, clearly and legibly, all
- these Cover Texts: Front-Cover Texts on the front cover, and
- Back-Cover Texts on the back cover. Both covers must also clearly
- and legibly identify you as the publisher of these copies. The
- front cover must present the full title with all words of the
- title equally prominent and visible. You may add other material
- on the covers in addition. Copying with changes limited to the
- covers, as long as they preserve the title of the Document and
- satisfy these conditions, can be treated as verbatim copying in
- other respects.
-
- If the required texts for either cover are too voluminous to fit
- legibly, you should put the first ones listed (as many as fit
- reasonably) on the actual cover, and continue the rest onto
- adjacent pages.
-
- If you publish or distribute Opaque copies of the Document
- numbering more than 100, you must either include a
- machine-readable Transparent copy along with each Opaque copy, or
- state in or with each Opaque copy a computer-network location from
- which the general network-using public has access to download
- using public-standard network protocols a complete Transparent
- copy of the Document, free of added material. If you use the
- latter option, you must take reasonably prudent steps, when you
- begin distribution of Opaque copies in quantity, to ensure that
- this Transparent copy will remain thus accessible at the stated
- location until at least one year after the last time you
- distribute an Opaque copy (directly or through your agents or
- retailers) of that edition to the public.
-
- It is requested, but not required, that you contact the authors of
- the Document well before redistributing any large number of
- copies, to give them a chance to provide you with an updated
- version of the Document.
-
- 4. MODIFICATIONS
-
- You may copy and distribute a Modified Version of the Document
- under the conditions of sections 2 and 3 above, provided that you
- release the Modified Version under precisely this License, with
- the Modified Version filling the role of the Document, thus
- licensing distribution and modification of the Modified Version to
- whoever possesses a copy of it. In addition, you must do these
- things in the Modified Version:
-
- A. Use in the Title Page (and on the covers, if any) a title
- distinct from that of the Document, and from those of
- previous versions (which should, if there were any, be listed
- in the History section of the Document). You may use the
- same title as a previous version if the original publisher of
- that version gives permission.
-
- B. List on the Title Page, as authors, one or more persons or
- entities responsible for authorship of the modifications in
- the Modified Version, together with at least five of the
- principal authors of the Document (all of its principal
- authors, if it has fewer than five), unless they release you
- from this requirement.
-
- C. State on the Title page the name of the publisher of the
- Modified Version, as the publisher.
-
- D. Preserve all the copyright notices of the Document.
-
- E. Add an appropriate copyright notice for your modifications
- adjacent to the other copyright notices.
-
- F. Include, immediately after the copyright notices, a license
- notice giving the public permission to use the Modified
- Version under the terms of this License, in the form shown in
- the Addendum below.
-
- G. Preserve in that license notice the full lists of Invariant
- Sections and required Cover Texts given in the Document's
- license notice.
-
- H. Include an unaltered copy of this License.
-
- I. Preserve the section Entitled "History", Preserve its Title,
- and add to it an item stating at least the title, year, new
- authors, and publisher of the Modified Version as given on
- the Title Page. If there is no section Entitled "History" in
- the Document, create one stating the title, year, authors,
- and publisher of the Document as given on its Title Page,
- then add an item describing the Modified Version as stated in
- the previous sentence.
-
- J. Preserve the network location, if any, given in the Document
- for public access to a Transparent copy of the Document, and
- likewise the network locations given in the Document for
- previous versions it was based on. These may be placed in
- the "History" section. You may omit a network location for a
- work that was published at least four years before the
- Document itself, or if the original publisher of the version
- it refers to gives permission.
-
- K. For any section Entitled "Acknowledgements" or "Dedications",
- Preserve the Title of the section, and preserve in the
- section all the substance and tone of each of the contributor
- acknowledgements and/or dedications given therein.
-
- L. Preserve all the Invariant Sections of the Document,
- unaltered in their text and in their titles. Section numbers
- or the equivalent are not considered part of the section
- titles.
-
- M. Delete any section Entitled "Endorsements". Such a section
- may not be included in the Modified Version.
-
- N. Do not retitle any existing section to be Entitled
- "Endorsements" or to conflict in title with any Invariant
- Section.
-
- O. Preserve any Warranty Disclaimers.
-
- If the Modified Version includes new front-matter sections or
- appendices that qualify as Secondary Sections and contain no
- material copied from the Document, you may at your option
- designate some or all of these sections as invariant. To do this,
- add their titles to the list of Invariant Sections in the Modified
- Version's license notice. These titles must be distinct from any
- other section titles.
-
- You may add a section Entitled "Endorsements", provided it contains
- nothing but endorsements of your Modified Version by various
- parties--for example, statements of peer review or that the text
- has been approved by an organization as the authoritative
- definition of a standard.
-
- You may add a passage of up to five words as a Front-Cover Text,
- and a passage of up to 25 words as a Back-Cover Text, to the end
- of the list of Cover Texts in the Modified Version. Only one
- passage of Front-Cover Text and one of Back-Cover Text may be
- added by (or through arrangements made by) any one entity. If the
- Document already includes a cover text for the same cover,
- previously added by you or by arrangement made by the same entity
- you are acting on behalf of, you may not add another; but you may
- replace the old one, on explicit permission from the previous
- publisher that added the old one.
-
- The author(s) and publisher(s) of the Document do not by this
- License give permission to use their names for publicity for or to
- assert or imply endorsement of any Modified Version.
-
- 5. COMBINING DOCUMENTS
-
- You may combine the Document with other documents released under
- this License, under the terms defined in section 4 above for
- modified versions, provided that you include in the combination
- all of the Invariant Sections of all of the original documents,
- unmodified, and list them all as Invariant Sections of your
- combined work in its license notice, and that you preserve all
- their Warranty Disclaimers.
-
- The combined work need only contain one copy of this License, and
- multiple identical Invariant Sections may be replaced with a single
- copy. If there are multiple Invariant Sections with the same name
- but different contents, make the title of each such section unique
- by adding at the end of it, in parentheses, the name of the
- original author or publisher of that section if known, or else a
- unique number. Make the same adjustment to the section titles in
- the list of Invariant Sections in the license notice of the
- combined work.
-
- In the combination, you must combine any sections Entitled
- "History" in the various original documents, forming one section
- Entitled "History"; likewise combine any sections Entitled
- "Acknowledgements", and any sections Entitled "Dedications". You
- must delete all sections Entitled "Endorsements."
-
- 6. COLLECTIONS OF DOCUMENTS
-
- You may make a collection consisting of the Document and other
- documents released under this License, and replace the individual
- copies of this License in the various documents with a single copy
- that is included in the collection, provided that you follow the
- rules of this License for verbatim copying of each of the
- documents in all other respects.
-
- You may extract a single document from such a collection, and
- distribute it individually under this License, provided you insert
- a copy of this License into the extracted document, and follow
- this License in all other respects regarding verbatim copying of
- that document.
-
- 7. AGGREGATION WITH INDEPENDENT WORKS
-
- A compilation of the Document or its derivatives with other
- separate and independent documents or works, in or on a volume of
- a storage or distribution medium, is called an "aggregate" if the
- copyright resulting from the compilation is not used to limit the
- legal rights of the compilation's users beyond what the individual
- works permit. When the Document is included in an aggregate, this
- License does not apply to the other works in the aggregate which
- are not themselves derivative works of the Document.
-
- If the Cover Text requirement of section 3 is applicable to these
- copies of the Document, then if the Document is less than one half
- of the entire aggregate, the Document's Cover Texts may be placed
- on covers that bracket the Document within the aggregate, or the
- electronic equivalent of covers if the Document is in electronic
- form. Otherwise they must appear on printed covers that bracket
- the whole aggregate.
-
- 8. TRANSLATION
-
- Translation is considered a kind of modification, so you may
- distribute translations of the Document under the terms of section
- 4. Replacing Invariant Sections with translations requires special
- permission from their copyright holders, but you may include
- translations of some or all Invariant Sections in addition to the
- original versions of these Invariant Sections. You may include a
- translation of this License, and all the license notices in the
- Document, and any Warranty Disclaimers, provided that you also
- include the original English version of this License and the
- original versions of those notices and disclaimers. In case of a
- disagreement between the translation and the original version of
- this License or a notice or disclaimer, the original version will
- prevail.
-
- If a section in the Document is Entitled "Acknowledgements",
- "Dedications", or "History", the requirement (section 4) to
- Preserve its Title (section 1) will typically require changing the
- actual title.
-
- 9. TERMINATION
-
- You may not copy, modify, sublicense, or distribute the Document
- except as expressly provided under this License. Any attempt
- otherwise to copy, modify, sublicense, or distribute it is void,
- and will automatically terminate your rights under this License.
-
- However, if you cease all violation of this License, then your
- license from a particular copyright holder is reinstated (a)
- provisionally, unless and until the copyright holder explicitly
- and finally terminates your license, and (b) permanently, if the
- copyright holder fails to notify you of the violation by some
- reasonable means prior to 60 days after the cessation.
-
- Moreover, your license from a particular copyright holder is
- reinstated permanently if the copyright holder notifies you of the
- violation by some reasonable means, this is the first time you have
- received notice of violation of this License (for any work) from
- that copyright holder, and you cure the violation prior to 30 days
- after your receipt of the notice.
-
- Termination of your rights under this section does not terminate
- the licenses of parties who have received copies or rights from
- you under this License. If your rights have been terminated and
- not permanently reinstated, receipt of a copy of some or all of
- the same material does not give you any rights to use it.
-
- 10. FUTURE REVISIONS OF THIS LICENSE
-
- The Free Software Foundation may publish new, revised versions of
- the GNU Free Documentation License from time to time. Such new
- versions will be similar in spirit to the present version, but may
- differ in detail to address new problems or concerns. See
- `http://www.gnu.org/copyleft/'.
-
- Each version of the License is given a distinguishing version
- number. If the Document specifies that a particular numbered
- version of this License "or any later version" applies to it, you
- have the option of following the terms and conditions either of
- that specified version or of any later version that has been
- published (not as a draft) by the Free Software Foundation. If
- the Document does not specify a version number of this License,
- you may choose any version ever published (not as a draft) by the
- Free Software Foundation. If the Document specifies that a proxy
- can decide which future versions of this License can be used, that
- proxy's public statement of acceptance of a version permanently
- authorizes you to choose that version for the Document.
-
- 11. RELICENSING
-
- "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
- World Wide Web server that publishes copyrightable works and also
- provides prominent facilities for anybody to edit those works. A
- public wiki that anybody can edit is an example of such a server.
- A "Massive Multiauthor Collaboration" (or "MMC") contained in the
- site means any set of copyrightable works thus published on the MMC
- site.
-
- "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
- license published by Creative Commons Corporation, a not-for-profit
- corporation with a principal place of business in San Francisco,
- California, as well as future copyleft versions of that license
- published by that same organization.
-
- "Incorporate" means to publish or republish a Document, in whole or
- in part, as part of another Document.
-
- An MMC is "eligible for relicensing" if it is licensed under this
- License, and if all works that were first published under this
- License somewhere other than this MMC, and subsequently
- incorporated in whole or in part into the MMC, (1) had no cover
- texts or invariant sections, and (2) were thus incorporated prior
- to November 1, 2008.
-
- The operator of an MMC Site may republish an MMC contained in the
- site under CC-BY-SA on the same site at any time before August 1,
- 2009, provided the MMC is eligible for relicensing.
-
-
-ADDENDUM: How to use this License for your documents
-====================================================
-
-To use this License in a document you have written, include a copy of
-the License in the document and put the following copyright and license
-notices just after the title page:
-
- Copyright (C) YEAR YOUR NAME.
- Permission is granted to copy, distribute and/or modify this document
- under the terms of the GNU Free Documentation License, Version 1.3
- or any later version published by the Free Software Foundation;
- with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
- Texts. A copy of the license is included in the section entitled ``GNU
- Free Documentation License''.
-
- If you have Invariant Sections, Front-Cover Texts and Back-Cover
-Texts, replace the "with...Texts." line with this:
-
- with the Invariant Sections being LIST THEIR TITLES, with
- the Front-Cover Texts being LIST, and with the Back-Cover Texts
- being LIST.
-
- If you have Invariant Sections without Cover Texts, or some other
-combination of the three, merge those two alternatives to suit the
-situation.
-
- If your document contains nontrivial examples of program code, we
-recommend releasing these examples in parallel under your choice of
-free software license, such as the GNU General Public License, to
-permit their use in free software.
-
-\1f
-File: hello.info, Node: Concept index, Prev: GNU Free Documentation License, Up: Top
-
-Concept index
-*************
-
-\0\b[index\0\b]
-* Menu:
-
-* --greeting: Invoking hello. (line 16)
-* --help <1>: Invoking hello. (line 20)
-* --help: Overview. (line 38)
-* --next-generation: Invoking hello. (line 31)
-* --traditional: Invoking hello. (line 38)
-* --version: Invoking hello. (line 42)
-* -g: Invoking hello. (line 16)
-* -h: Invoking hello. (line 20)
-* -n: Invoking hello. (line 31)
-* -t: Invoking hello. (line 38)
-* -v: Invoking hello. (line 42)
-* authors: Overview. (line 72)
-* Autoconf: Overview. (line 25)
-* Automake: Overview. (line 25)
-* Berry, Karl: Overview. (line 72)
-* Brittenson, Jan: Overview. (line 72)
-* bug reporting: Reporting bugs. (line 6)
-* checklist for bug reports: Reporting bugs. (line 9)
-* Eichwalder, Karl: Overview. (line 72)
-* environment variables, help for: Invoking hello. (line 23)
-* examples: Sample output. (line 6)
-* Friedman, Noah: Overview. (line 72)
-* Gettext: Overview. (line 34)
-* GNU coding standards: Overview. (line 17)
-* GNU maintainer standards: Overview. (line 17)
-* Gnulib: Overview. (line 29)
-* greetings: Overview. (line 6)
-* Haertel, Mike: Overview. (line 72)
-* Hannum, Charles: Overview. (line 72)
-* help: Invoking hello. (line 6)
-* Help2man: Overview. (line 42)
-* invoking: Invoking hello. (line 6)
-* joke, not: Overview. (line 12)
-* King, The: Overview. (line 72)
-* MacKenzie, David: Overview. (line 72)
-* Makefile.am targets: Overview. (line 56)
-* McGrath, Roland: Overview. (line 72)
-* modern: Invoking hello. (line 38)
-* options: Invoking hello. (line 6)
-* overview: Overview. (line 6)
-* patches, contributing: Reporting bugs. (line 32)
-* problems: Reporting bugs. (line 6)
-* README-dev source file: Overview. (line 29)
-* reporting bugs: Reporting bugs. (line 6)
-* sample output: Sample output. (line 6)
-* srclist-update script: Overview. (line 29)
-* standards, GNU coding: Overview. (line 17)
-* standards, GNU maintainer: Overview. (line 17)
-* Texinfo: Overview. (line 47)
-* traditional: Invoking hello. (line 38)
-* usage: Invoking hello. (line 6)
-
-
-\1f
-Tag Table:
-Node: Top\7f813
-Node: Overview\7f1346
-Node: Sample output\7f4544
-Node: Invoking hello\7f4932
-Node: Reporting bugs\7f6412
-Node: GNU Free Documentation License\7f7703
-Node: Concept index\7f32878
-\1f
-End Tag Table
+++ /dev/null
-\input texinfo @c -*-texinfo-*-
-@c %**start of header
-@setfilename hello.info
-@include version.texi
-@settitle GNU Hello @value{VERSION}
-
-@c Define a new index for options.
-@defcodeindex op
-@c Combine everything into one index (arbitrarily chosen to be the
-@c concept index).
-@syncodeindex op cp
-@c %**end of header
-
-@copying
-This manual is for GNU Hello (version @value{VERSION}, @value{UPDATED}),
-which prints a friendly greeting (and serves as an example GNU package).
-
-Copyright @copyright{} 1992, 1993, 1996, 2002, 2005-2012 Free Software Foundation, Inc.
-
-@quotation
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.3 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
-Texts. A copy of the license is included in the section entitled
-``GNU Free Documentation License''.
-@end quotation
-@end copying
-@c If your manual is published on paper by the FSF, it should include
-@c the standard FSF Front-Cover and Back-Cover Texts, as given in
-@c maintain.texi.
-
-@dircategory Basics
-@direntry
-* Hello: (hello). Hello, GNU world.
-@end direntry
-
-@titlepage
-@title GNU Hello
-@subtitle for version @value{VERSION}, @value{UPDATED}
-@author GNU Hello Developers (@email{bug-hello@@gnu.org})
-@page
-@vskip 0pt plus 1filll
-@insertcopying
-@end titlepage
-
-@contents
-
-
-@ifnottex
-@node Top
-@top GNU Hello
-
-This manual is for GNU Hello (version @value{VERSION}, @value{UPDATED}),
-which prints a friendly greeting (and serves as an example GNU package).
-@end ifnottex
-
-@menu
-* Overview:: General purpose and information.
-* Sample output:: Sample output from @command{hello}.
-* Invoking hello:: How to run @command{hello}.
-* Reporting bugs:: Sending bug reports and feature suggestions.
-* GNU Free Documentation License:: Copying and sharing this documentation.
-* Concept index:: Index of concepts.
-@end menu
-
-
-@node Overview
-@chapter Overview
-
-@cindex greetings
-@cindex overview
-
-The GNU @command{hello} program
-(@url{http://www.gnu.org/software/hello/}) produces a familiar,
-friendly greeting. It allows nonprogrammers to use a classic computer
-science tool which would otherwise be unavailable to them. Because it
-is protected by the GNU General Public License, users are free (in
-perpetuity) to share and change it.
-
-@cindex joke, not
-Not to spoil the joke, but of course the practical purpose of GNU
-Hello is to serve as a minimal example of a GNU package. So, although
-most manuals don't need to discuss the implementation of the programs
-they document, that is part of the goal here.
-
-@cindex GNU coding standards
-@cindex GNU maintainer standards
-@cindex standards, GNU coding
-@cindex standards, GNU maintainer
-First, GNU Hello follows the GNU coding standards
-(@pxref{Top,,Preface,standards,GNU Coding Standards}) and GNU
-maintainer standards (@pxref{Top,,Preface,maintain, Information for
-GNU Maintainers}). These are the basic documents which all GNU
-packages should adhere to.
-
-The Hello package also implements recommended development practices
-not embodied in the standards, using other GNU packages and features:
-
-@itemize @bullet
-@item
-@cindex Automake
-@cindex Autoconf
-It uses Automake (@pxref{Top,,Introduction,automake,GNU Automake}) and
-hence also Autoconf (@pxref{Top,,Introduction,autoconf,GNU Autoconf})
-for configuration.
-
-@item
-@cindex Gnulib
-@cindex @command{srclist-update} script
-@cindex @file{README-dev} source file
-It uses Gnulib (@pxref{Top,,Introduction,gnulib,GNU Gnulib}) to enhance
-portability and avoid duplication of common sources. Both
-@code{gnulib-tool} and @code{srclist-update} are used, for purposes of
-example. See the @file{README-dev} file in the distribution.
-
-@item
-@cindex Gettext
-GNU Gettext (@pxref{Top,,Introduction,gettext,GNU Gettext}) is used
-for internationalization support. Hello's greeting has been translated
-into many languages.
-
-@item
-@opindex --help
-Internally, Hello uses the GNU @code{getopt_long} function
-(@pxref{Getopt Long Options,,,libc,GNU C Library}) to parse options,
-thus supporting GNU-style long options such as @option{--help}.
-
-@item
-@cindex Help2man
-The Hello Man page is generated with GNU @code{help2man}
-(@pxref{Top,,Overview,help2man,GNU @code{help2man}}) from the
-@option{--help} output. This relieves the maintainers from the burden
-of updating separate man documentation, yet provides a reasonable
-overview for man devotees.
-
-@item
-@cindex Texinfo
-Finally, Texinfo (@pxref{Top,,Introduction,texinfo,Texinfo}) is the
-documentation format for this manual. It supports output in Info,
-HTML, PDF, DVI, plain text, XML, and other formats.
-
-@end itemize
-
-GNU Hello is implemented in C@. The GNU Gettext distribution contains
-``hello world'' examples in many other programming languages; see the
-Gettext home page at @url{http://www.gnu.org/software/gettext/}.
-
-@cindex @file{Makefile.am} targets
-The top-level @file{Makefile.am} in Hello also contains a few special
-targets for other projects to adapt as desired:
-
-@table @code
-@item diff
-Make a diff from the previous release, assuming the current tarball is
-in the current tarball.
-
-@item po-check
-Verify that all source files using @code{_()} are included for
-translation in @file{po/POTFILES.in}, so translators will have all the
-messages.
-
-@item wwwdoc
-Sample procedure for updating the manual on the GNU web site, in this
-case @url{http://www.gnu.org/software/hello/manual/}.
-@end table
-
-@cindex authors
-@cindex Haertel, Mike
-@cindex MacKenzie, David
-@cindex Brittenson, Jan
-@cindex Hannum, Charles
-@cindex McGrath, Roland
-@cindex Friedman, Noah
-@cindex Eichwalder, Karl
-@cindex King, The
-@cindex Berry, Karl
-GNU Hello was written by Mike Haertel, David MacKenzie, Jan
-Brittenson, Charles Hannum, Roland McGrath, Noah Friedman, Karl
-Eichwalder, Karl Berry, and @w{The King}.
-
-
-@node Sample output
-@chapter Sample output
-
-@cindex sample output
-@cindex examples
-
-Here are some examples of running GNU Hello.
-
-This is the output of the command @samp{hello}:
-
-@example
-Hello, world!
-@end example
-
-This is the output of the command @samp{hello --traditional}:
-
-@example
-hello, world
-@end example
-
-This is the output of the command @samp{hello --greeting=hi}:
-
-@example
-hi
-@end example
-
-
-@node Invoking hello
-@chapter Invoking @command{hello}
-
-@cindex invoking
-@cindex options
-@cindex usage
-@cindex help
-
-The format for running the @command{hello} program is:
-
-@example
-hello @var{option} @dots{}
-@end example
-
-With no options, @command{hello} prints the greeting @samp{Hello,
-world!}.
-
-@command{hello} supports the following options:
-
-@table @option
-@item --greeting=@var{text}
-@itemx -g @var{text}
-@opindex --greeting
-@opindex -g
-Output @var{text} instead of the default greeting.
-
-@item --help
-@itemx -h
-@opindex --help
-@opindex -h
-Print an informative help message on standard output and exit
-successfully.
-
-@cindex environment variables, help for
-@c This comment prevents `make syntax-check' from diagnosing a doubled word "for\nFor"
-For the @option{--help} output of GNU programs, it's strongly
-encouraged to include a brief (one or two sentences) description of
-what the program does, as well as the synopsis of how to run the
-program. Any environment variables which affect execution should also
-be mentioned (Hello doesn't have any).
-
-@item --next-generation
-@itemx -n
-@opindex --next-generation
-@opindex -n
-Output @samp{Hello, world!}, but possibly including box-drawing
-characters or other fancy stuff, especially in translated locales.
-(If you would like to volunteer to translate messages for GNU packages,
-please see @url{http://translationproject.org}.)
-
-@item --traditional
-@itemx -t
-@opindex --traditional
-@opindex -t
-@cindex traditional
-@cindex modern
-Output the traditional greeting message @samp{hello, world}.
-
-@item --version
-@itemx -v
-@opindex --version
-@opindex -v
-Print the version number and licensing information of Hello on
-standard output and then exit successfully.
-
-@end table
-
-If more than one of the greeting options (@option{-g}, @option{-n},
-@option{-t}, and their long-named equivalents) is specified, whichever
-comes last takes precedence.
-
-
-@node Reporting bugs
-@chapter Reporting bugs
-
-@cindex bug reporting
-@cindex problems
-@cindex reporting bugs
-
-To report bugs, suggest enhancements or otherwise discuss GNU Hello,
-please send electronic mail to @email{bug-hello@@gnu.org}.
-
-@cindex checklist for bug reports
-For bug reports, please include enough information for the maintainers
-to reproduce the problem. Generally speaking, that means:
-
-@itemize @bullet
-@item The version numbers of Hello (which you can find by running
- @w{@samp{hello --version}}) and any other program(s) or
- manual(s) involved.
-@item Hardware and operating system names and versions.
-@item The contents of any input files necessary to reproduce the bug.
-@item The expected behavior and/or output.
-@item A description of the problem and samples of any erroneous output.
-@item Options you gave to @command{configure} other than specifying
- installation directories.
-@item Anything else that you think would be helpful.
-@end itemize
-
-When in doubt whether something is needed or not, include it. It's
-better to include too much than to leave out something important.
-
-@cindex patches, contributing
-Patches are welcome; if possible, please make them with @samp{@w{diff
--c}} (@pxref{Top,, Overview, diff, Comparing and Merging Files}) and
-include @file{ChangeLog} entries (@pxref{Change Log,,, emacs, The GNU
-Emacs Manual}). Please follow the existing coding style.
-
-
-@node GNU Free Documentation License
-@appendix GNU Free Documentation License
-
-@include fdl.texi
-
-
-@node Concept index
-@unnumbered Concept index
-
-@printindex cp
-
-@bye
+++ /dev/null
-@set UPDATED 19 April 2012
-@set UPDATED-MONTH April 2012
-@set EDITION 2.8
-@set VERSION 2.8
+++ /dev/null
-@set UPDATED 19 April 2012
-@set UPDATED-MONTH April 2012
-@set EDITION 2.8
-@set VERSION 2.8
+++ /dev/null
-## DO NOT EDIT! GENERATED AUTOMATICALLY!
-## Process this file with automake to produce Makefile.in.
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This file is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this file. If not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License,
-# this file may be distributed as part of a program that
-# contains a configuration script generated by Autoconf, under
-# the same distribution terms as the rest of that program.
-#
-# Generated by gnulib-tool.
-# Reproduce by: gnulib-tool --import --dir=. --local-dir=gl --lib=libhello --source-base=lib --m4-base=m4 --doc-base=doc --tests-base=tests --aux-dir=build-aux --no-conditional-dependencies --no-libtool --macro-prefix=gl announce-gen closeout do-release-commit-and-tag fdl gendocs getopt-gnu gettext gnupload maintainer-makefile progname readme-release
-
-AUTOMAKE_OPTIONS = 1.5 gnits
-
-SUBDIRS =
-noinst_HEADERS =
-noinst_LIBRARIES =
-noinst_LTLIBRARIES =
-EXTRA_DIST =
-BUILT_SOURCES =
-SUFFIXES =
-MOSTLYCLEANFILES = core *.stackdump
-MOSTLYCLEANDIRS =
-CLEANFILES =
-DISTCLEANFILES =
-MAINTAINERCLEANFILES =
-
-AM_CPPFLAGS =
-AM_CFLAGS =
-
-noinst_LIBRARIES += libhello.a
-
-libhello_a_SOURCES =
-libhello_a_LIBADD = $(gl_LIBOBJS)
-libhello_a_DEPENDENCIES = $(gl_LIBOBJS)
-EXTRA_libhello_a_SOURCES =
-
-## begin gnulib module announce-gen
-
-
-EXTRA_DIST += $(top_srcdir)/build-aux/announce-gen
-
-## end gnulib module announce-gen
-
-## begin gnulib module c-ctype
-
-libhello_a_SOURCES += c-ctype.h c-ctype.c
-
-## end gnulib module c-ctype
-
-## begin gnulib module c-strcase
-
-libhello_a_SOURCES += c-strcase.h c-strcasecmp.c c-strncasecmp.c
-
-## end gnulib module c-strcase
-
-## begin gnulib module c-strcaseeq
-
-
-EXTRA_DIST += c-strcaseeq.h
-
-## end gnulib module c-strcaseeq
-
-## begin gnulib module close-stream
-
-libhello_a_SOURCES += close-stream.c
-
-EXTRA_DIST += close-stream.h
-
-## end gnulib module close-stream
-
-## begin gnulib module closeout
-
-libhello_a_SOURCES += closeout.c
-
-EXTRA_DIST += closeout.h
-
-## end gnulib module closeout
-
-## begin gnulib module configmake
-
-# Listed in the same order as the GNU makefile conventions, and
-# provided by autoconf 2.59c+.
-# The Automake-defined pkg* macros are appended, in the order
-# listed in the Automake 1.10a+ documentation.
-configmake.h: Makefile
- $(AM_V_GEN)rm -f $@-t && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- echo '#define PREFIX "$(prefix)"'; \
- echo '#define EXEC_PREFIX "$(exec_prefix)"'; \
- echo '#define BINDIR "$(bindir)"'; \
- echo '#define SBINDIR "$(sbindir)"'; \
- echo '#define LIBEXECDIR "$(libexecdir)"'; \
- echo '#define DATAROOTDIR "$(datarootdir)"'; \
- echo '#define DATADIR "$(datadir)"'; \
- echo '#define SYSCONFDIR "$(sysconfdir)"'; \
- echo '#define SHAREDSTATEDIR "$(sharedstatedir)"'; \
- echo '#define LOCALSTATEDIR "$(localstatedir)"'; \
- echo '#define INCLUDEDIR "$(includedir)"'; \
- echo '#define OLDINCLUDEDIR "$(oldincludedir)"'; \
- echo '#define DOCDIR "$(docdir)"'; \
- echo '#define INFODIR "$(infodir)"'; \
- echo '#define HTMLDIR "$(htmldir)"'; \
- echo '#define DVIDIR "$(dvidir)"'; \
- echo '#define PDFDIR "$(pdfdir)"'; \
- echo '#define PSDIR "$(psdir)"'; \
- echo '#define LIBDIR "$(libdir)"'; \
- echo '#define LISPDIR "$(lispdir)"'; \
- echo '#define LOCALEDIR "$(localedir)"'; \
- echo '#define MANDIR "$(mandir)"'; \
- echo '#define MANEXT "$(manext)"'; \
- echo '#define PKGDATADIR "$(pkgdatadir)"'; \
- echo '#define PKGINCLUDEDIR "$(pkgincludedir)"'; \
- echo '#define PKGLIBDIR "$(pkglibdir)"'; \
- echo '#define PKGLIBEXECDIR "$(pkglibexecdir)"'; \
- } | sed '/""/d' > $@-t && \
- mv -f $@-t $@
-
-BUILT_SOURCES += configmake.h
-CLEANFILES += configmake.h configmake.h-t
-
-## end gnulib module configmake
-
-## begin gnulib module do-release-commit-and-tag
-
-
-EXTRA_DIST += $(top_srcdir)/build-aux/do-release-commit-and-tag
-
-## end gnulib module do-release-commit-and-tag
-
-## begin gnulib module errno
-
-BUILT_SOURCES += $(ERRNO_H)
-
-# We need the following in order to create <errno.h> when the system
-# doesn't have one that is POSIX compliant.
-if GL_GENERATE_ERRNO_H
-errno.h: errno.in.h $(top_builddir)/config.status
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_ERRNO_H''@|$(NEXT_ERRNO_H)|g' \
- -e 's|@''EMULTIHOP_HIDDEN''@|$(EMULTIHOP_HIDDEN)|g' \
- -e 's|@''EMULTIHOP_VALUE''@|$(EMULTIHOP_VALUE)|g' \
- -e 's|@''ENOLINK_HIDDEN''@|$(ENOLINK_HIDDEN)|g' \
- -e 's|@''ENOLINK_VALUE''@|$(ENOLINK_VALUE)|g' \
- -e 's|@''EOVERFLOW_HIDDEN''@|$(EOVERFLOW_HIDDEN)|g' \
- -e 's|@''EOVERFLOW_VALUE''@|$(EOVERFLOW_VALUE)|g' \
- < $(srcdir)/errno.in.h; \
- } > $@-t && \
- mv $@-t $@
-else
-errno.h: $(top_builddir)/config.status
- rm -f $@
-endif
-MOSTLYCLEANFILES += errno.h errno.h-t
-
-EXTRA_DIST += errno.in.h
-
-## end gnulib module errno
-
-## begin gnulib module error
-
-
-EXTRA_DIST += error.c error.h
-
-EXTRA_libhello_a_SOURCES += error.c
-
-## end gnulib module error
-
-## begin gnulib module exitfail
-
-libhello_a_SOURCES += exitfail.c
-
-EXTRA_DIST += exitfail.h
-
-## end gnulib module exitfail
-
-## begin gnulib module fpending
-
-
-EXTRA_DIST += fpending.c fpending.h
-
-EXTRA_libhello_a_SOURCES += fpending.c
-
-## end gnulib module fpending
-
-## begin gnulib module gendocs
-
-
-EXTRA_DIST += $(top_srcdir)/build-aux/gendocs.sh
-
-## end gnulib module gendocs
-
-## begin gnulib module getopt-posix
-
-BUILT_SOURCES += $(GETOPT_H)
-
-# We need the following in order to create <getopt.h> when the system
-# doesn't have one that works with the given compiler.
-getopt.h: getopt.in.h $(top_builddir)/config.status $(ARG_NONNULL_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''HAVE_GETOPT_H''@|$(HAVE_GETOPT_H)|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_GETOPT_H''@|$(NEXT_GETOPT_H)|g' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- < $(srcdir)/getopt.in.h; \
- } > $@-t && \
- mv -f $@-t $@
-MOSTLYCLEANFILES += getopt.h getopt.h-t
-
-EXTRA_DIST += getopt.c getopt.in.h getopt1.c getopt_int.h
-
-EXTRA_libhello_a_SOURCES += getopt.c getopt1.c
-
-## end gnulib module getopt-posix
-
-## begin gnulib module gettext
-
-# This is for those projects which use "gettextize --intl" to put a source-code
-# copy of libintl into their package. In such projects, every Makefile.am needs
-# -I$(top_builddir)/intl, so that <libintl.h> can be found in this directory.
-# For the Makefile.ams in other directories it is the maintainer's
-# responsibility; for the one from gnulib we do it here.
-# This option has no effect when the user disables NLS (because then the intl
-# directory contains no libintl.h file) or when the project does not use
-# "gettextize --intl".
-AM_CPPFLAGS += -I$(top_builddir)/intl
-
-EXTRA_DIST += $(top_srcdir)/build-aux/config.rpath
-
-## end gnulib module gettext
-
-## begin gnulib module gettext-h
-
-libhello_a_SOURCES += gettext.h
-
-## end gnulib module gettext-h
-
-## begin gnulib module gnumakefile
-
-distclean-local: clean-GNUmakefile
-clean-GNUmakefile:
- test x'$(VPATH)' != x && rm -f $(top_builddir)/GNUmakefile || :
-
-EXTRA_DIST += $(top_srcdir)/GNUmakefile
-
-## end gnulib module gnumakefile
-
-## begin gnulib module gnupload
-
-
-EXTRA_DIST += $(top_srcdir)/build-aux/gnupload
-
-## end gnulib module gnupload
-
-## begin gnulib module havelib
-
-
-EXTRA_DIST += $(top_srcdir)/build-aux/config.rpath
-
-## end gnulib module havelib
-
-## begin gnulib module intprops
-
-
-EXTRA_DIST += intprops.h
-
-## end gnulib module intprops
-
-## begin gnulib module localcharset
-
-libhello_a_SOURCES += localcharset.h localcharset.c
-
-# We need the following in order to install a simple file in $(libdir)
-# which is shared with other installed packages. We use a list of referencing
-# packages so that "make uninstall" will remove the file if and only if it
-# is not used by another installed package.
-# On systems with glibc-2.1 or newer, the file is redundant, therefore we
-# avoid installing it.
-
-all-local: charset.alias ref-add.sed ref-del.sed
-
-charset_alias = $(DESTDIR)$(libdir)/charset.alias
-charset_tmp = $(DESTDIR)$(libdir)/charset.tmp
-install-exec-local: install-exec-localcharset
-install-exec-localcharset: all-local
- if test $(GLIBC21) = no; then \
- case '$(host_os)' in \
- darwin[56]*) \
- need_charset_alias=true ;; \
- darwin* | cygwin* | mingw* | pw32* | cegcc*) \
- need_charset_alias=false ;; \
- *) \
- need_charset_alias=true ;; \
- esac ; \
- else \
- need_charset_alias=false ; \
- fi ; \
- if $$need_charset_alias; then \
- $(mkinstalldirs) $(DESTDIR)$(libdir) ; \
- fi ; \
- if test -f $(charset_alias); then \
- sed -f ref-add.sed $(charset_alias) > $(charset_tmp) ; \
- $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \
- rm -f $(charset_tmp) ; \
- else \
- if $$need_charset_alias; then \
- sed -f ref-add.sed charset.alias > $(charset_tmp) ; \
- $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \
- rm -f $(charset_tmp) ; \
- fi ; \
- fi
-
-uninstall-local: uninstall-localcharset
-uninstall-localcharset: all-local
- if test -f $(charset_alias); then \
- sed -f ref-del.sed $(charset_alias) > $(charset_tmp); \
- if grep '^# Packages using this file: $$' $(charset_tmp) \
- > /dev/null; then \
- rm -f $(charset_alias); \
- else \
- $(INSTALL_DATA) $(charset_tmp) $(charset_alias); \
- fi; \
- rm -f $(charset_tmp); \
- fi
-
-charset.alias: config.charset
- $(AM_V_GEN)rm -f t-$@ $@ && \
- $(SHELL) $(srcdir)/config.charset '$(host)' > t-$@ && \
- mv t-$@ $@
-
-SUFFIXES += .sed .sin
-.sin.sed:
- $(AM_V_GEN)rm -f t-$@ $@ && \
- sed -e '/^#/d' -e 's/@''PACKAGE''@/$(PACKAGE)/g' $< > t-$@ && \
- mv t-$@ $@
-
-CLEANFILES += charset.alias ref-add.sed ref-del.sed
-
-EXTRA_DIST += config.charset ref-add.sin ref-del.sin
-
-## end gnulib module localcharset
-
-## begin gnulib module maintainer-makefile
-
-EXTRA_DIST += $(top_srcdir)/maint.mk
-
-## end gnulib module maintainer-makefile
-
-## begin gnulib module mbrtowc
-
-
-EXTRA_DIST += mbrtowc.c
-
-EXTRA_libhello_a_SOURCES += mbrtowc.c
-
-## end gnulib module mbrtowc
-
-## begin gnulib module mbsinit
-
-
-EXTRA_DIST += mbsinit.c
-
-EXTRA_libhello_a_SOURCES += mbsinit.c
-
-## end gnulib module mbsinit
-
-## begin gnulib module msvc-inval
-
-
-EXTRA_DIST += msvc-inval.c msvc-inval.h
-
-EXTRA_libhello_a_SOURCES += msvc-inval.c
-
-## end gnulib module msvc-inval
-
-## begin gnulib module msvc-nothrow
-
-
-EXTRA_DIST += msvc-nothrow.c msvc-nothrow.h
-
-EXTRA_libhello_a_SOURCES += msvc-nothrow.c
-
-## end gnulib module msvc-nothrow
-
-## begin gnulib module progname
-
-libhello_a_SOURCES += progname.h progname.c
-
-## end gnulib module progname
-
-## begin gnulib module quotearg
-
-libhello_a_SOURCES += quotearg.c
-
-EXTRA_DIST += quote.h quotearg.h
-
-## end gnulib module quotearg
-
-## begin gnulib module readme-release
-
-
-EXTRA_DIST += $(top_srcdir)/README-release
-
-## end gnulib module readme-release
-
-## begin gnulib module snippet/_Noreturn
-
-# Because this Makefile snippet defines a variable used by other
-# gnulib Makefile snippets, it must be present in all Makefile.am that
-# need it. This is ensured by the applicability 'all' defined above.
-
-_NORETURN_H=$(top_srcdir)/build-aux/snippet/_Noreturn.h
-
-EXTRA_DIST += $(top_srcdir)/build-aux/snippet/_Noreturn.h
-
-## end gnulib module snippet/_Noreturn
-
-## begin gnulib module snippet/arg-nonnull
-
-# The BUILT_SOURCES created by this Makefile snippet are not used via #include
-# statements but through direct file reference. Therefore this snippet must be
-# present in all Makefile.am that need it. This is ensured by the applicability
-# 'all' defined above.
-
-BUILT_SOURCES += arg-nonnull.h
-# The arg-nonnull.h that gets inserted into generated .h files is the same as
-# build-aux/snippet/arg-nonnull.h, except that it has the copyright header cut
-# off.
-arg-nonnull.h: $(top_srcdir)/build-aux/snippet/arg-nonnull.h
- $(AM_V_GEN)rm -f $@-t $@ && \
- sed -n -e '/GL_ARG_NONNULL/,$$p' \
- < $(top_srcdir)/build-aux/snippet/arg-nonnull.h \
- > $@-t && \
- mv $@-t $@
-MOSTLYCLEANFILES += arg-nonnull.h arg-nonnull.h-t
-
-ARG_NONNULL_H=arg-nonnull.h
-
-EXTRA_DIST += $(top_srcdir)/build-aux/snippet/arg-nonnull.h
-
-## end gnulib module snippet/arg-nonnull
-
-## begin gnulib module snippet/c++defs
-
-# The BUILT_SOURCES created by this Makefile snippet are not used via #include
-# statements but through direct file reference. Therefore this snippet must be
-# present in all Makefile.am that need it. This is ensured by the applicability
-# 'all' defined above.
-
-BUILT_SOURCES += c++defs.h
-# The c++defs.h that gets inserted into generated .h files is the same as
-# build-aux/snippet/c++defs.h, except that it has the copyright header cut off.
-c++defs.h: $(top_srcdir)/build-aux/snippet/c++defs.h
- $(AM_V_GEN)rm -f $@-t $@ && \
- sed -n -e '/_GL_CXXDEFS/,$$p' \
- < $(top_srcdir)/build-aux/snippet/c++defs.h \
- > $@-t && \
- mv $@-t $@
-MOSTLYCLEANFILES += c++defs.h c++defs.h-t
-
-CXXDEFS_H=c++defs.h
-
-EXTRA_DIST += $(top_srcdir)/build-aux/snippet/c++defs.h
-
-## end gnulib module snippet/c++defs
-
-## begin gnulib module snippet/warn-on-use
-
-BUILT_SOURCES += warn-on-use.h
-# The warn-on-use.h that gets inserted into generated .h files is the same as
-# build-aux/snippet/warn-on-use.h, except that it has the copyright header cut
-# off.
-warn-on-use.h: $(top_srcdir)/build-aux/snippet/warn-on-use.h
- $(AM_V_GEN)rm -f $@-t $@ && \
- sed -n -e '/^.ifndef/,$$p' \
- < $(top_srcdir)/build-aux/snippet/warn-on-use.h \
- > $@-t && \
- mv $@-t $@
-MOSTLYCLEANFILES += warn-on-use.h warn-on-use.h-t
-
-WARN_ON_USE_H=warn-on-use.h
-
-EXTRA_DIST += $(top_srcdir)/build-aux/snippet/warn-on-use.h
-
-## end gnulib module snippet/warn-on-use
-
-## begin gnulib module stdbool
-
-BUILT_SOURCES += $(STDBOOL_H)
-
-# We need the following in order to create <stdbool.h> when the system
-# doesn't have one that works.
-if GL_GENERATE_STDBOOL_H
-stdbool.h: stdbool.in.h $(top_builddir)/config.status
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- sed -e 's/@''HAVE__BOOL''@/$(HAVE__BOOL)/g' < $(srcdir)/stdbool.in.h; \
- } > $@-t && \
- mv $@-t $@
-else
-stdbool.h: $(top_builddir)/config.status
- rm -f $@
-endif
-MOSTLYCLEANFILES += stdbool.h stdbool.h-t
-
-EXTRA_DIST += stdbool.in.h
-
-## end gnulib module stdbool
-
-## begin gnulib module stddef
-
-BUILT_SOURCES += $(STDDEF_H)
-
-# We need the following in order to create <stddef.h> when the system
-# doesn't have one that works with the given compiler.
-if GL_GENERATE_STDDEF_H
-stddef.h: stddef.in.h $(top_builddir)/config.status
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_STDDEF_H''@|$(NEXT_STDDEF_H)|g' \
- -e 's|@''HAVE_WCHAR_T''@|$(HAVE_WCHAR_T)|g' \
- -e 's|@''REPLACE_NULL''@|$(REPLACE_NULL)|g' \
- < $(srcdir)/stddef.in.h; \
- } > $@-t && \
- mv $@-t $@
-else
-stddef.h: $(top_builddir)/config.status
- rm -f $@
-endif
-MOSTLYCLEANFILES += stddef.h stddef.h-t
-
-EXTRA_DIST += stddef.in.h
-
-## end gnulib module stddef
-
-## begin gnulib module stdlib
-
-BUILT_SOURCES += stdlib.h
-
-# We need the following in order to create <stdlib.h> when the system
-# doesn't have one that works with the given compiler.
-stdlib.h: stdlib.in.h $(top_builddir)/config.status $(CXXDEFS_H) \
- $(_NORETURN_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_STDLIB_H''@|$(NEXT_STDLIB_H)|g' \
- -e 's/@''GNULIB__EXIT''@/$(GNULIB__EXIT)/g' \
- -e 's/@''GNULIB_ATOLL''@/$(GNULIB_ATOLL)/g' \
- -e 's/@''GNULIB_CALLOC_POSIX''@/$(GNULIB_CALLOC_POSIX)/g' \
- -e 's/@''GNULIB_CANONICALIZE_FILE_NAME''@/$(GNULIB_CANONICALIZE_FILE_NAME)/g' \
- -e 's/@''GNULIB_GETLOADAVG''@/$(GNULIB_GETLOADAVG)/g' \
- -e 's/@''GNULIB_GETSUBOPT''@/$(GNULIB_GETSUBOPT)/g' \
- -e 's/@''GNULIB_GRANTPT''@/$(GNULIB_GRANTPT)/g' \
- -e 's/@''GNULIB_MALLOC_POSIX''@/$(GNULIB_MALLOC_POSIX)/g' \
- -e 's/@''GNULIB_MBTOWC''@/$(GNULIB_MBTOWC)/g' \
- -e 's/@''GNULIB_MKDTEMP''@/$(GNULIB_MKDTEMP)/g' \
- -e 's/@''GNULIB_MKOSTEMP''@/$(GNULIB_MKOSTEMP)/g' \
- -e 's/@''GNULIB_MKOSTEMPS''@/$(GNULIB_MKOSTEMPS)/g' \
- -e 's/@''GNULIB_MKSTEMP''@/$(GNULIB_MKSTEMP)/g' \
- -e 's/@''GNULIB_MKSTEMPS''@/$(GNULIB_MKSTEMPS)/g' \
- -e 's/@''GNULIB_POSIX_OPENPT''@/$(GNULIB_POSIX_OPENPT)/g' \
- -e 's/@''GNULIB_PTSNAME''@/$(GNULIB_PTSNAME)/g' \
- -e 's/@''GNULIB_PTSNAME_R''@/$(GNULIB_PTSNAME_R)/g' \
- -e 's/@''GNULIB_PUTENV''@/$(GNULIB_PUTENV)/g' \
- -e 's/@''GNULIB_RANDOM''@/$(GNULIB_RANDOM)/g' \
- -e 's/@''GNULIB_RANDOM_R''@/$(GNULIB_RANDOM_R)/g' \
- -e 's/@''GNULIB_REALLOC_POSIX''@/$(GNULIB_REALLOC_POSIX)/g' \
- -e 's/@''GNULIB_REALPATH''@/$(GNULIB_REALPATH)/g' \
- -e 's/@''GNULIB_RPMATCH''@/$(GNULIB_RPMATCH)/g' \
- -e 's/@''GNULIB_SETENV''@/$(GNULIB_SETENV)/g' \
- -e 's/@''GNULIB_STRTOD''@/$(GNULIB_STRTOD)/g' \
- -e 's/@''GNULIB_STRTOLL''@/$(GNULIB_STRTOLL)/g' \
- -e 's/@''GNULIB_STRTOULL''@/$(GNULIB_STRTOULL)/g' \
- -e 's/@''GNULIB_SYSTEM_POSIX''@/$(GNULIB_SYSTEM_POSIX)/g' \
- -e 's/@''GNULIB_UNLOCKPT''@/$(GNULIB_UNLOCKPT)/g' \
- -e 's/@''GNULIB_UNSETENV''@/$(GNULIB_UNSETENV)/g' \
- -e 's/@''GNULIB_WCTOMB''@/$(GNULIB_WCTOMB)/g' \
- < $(srcdir)/stdlib.in.h | \
- sed -e 's|@''HAVE__EXIT''@|$(HAVE__EXIT)|g' \
- -e 's|@''HAVE_ATOLL''@|$(HAVE_ATOLL)|g' \
- -e 's|@''HAVE_CANONICALIZE_FILE_NAME''@|$(HAVE_CANONICALIZE_FILE_NAME)|g' \
- -e 's|@''HAVE_DECL_GETLOADAVG''@|$(HAVE_DECL_GETLOADAVG)|g' \
- -e 's|@''HAVE_GETSUBOPT''@|$(HAVE_GETSUBOPT)|g' \
- -e 's|@''HAVE_GRANTPT''@|$(HAVE_GRANTPT)|g' \
- -e 's|@''HAVE_MKDTEMP''@|$(HAVE_MKDTEMP)|g' \
- -e 's|@''HAVE_MKOSTEMP''@|$(HAVE_MKOSTEMP)|g' \
- -e 's|@''HAVE_MKOSTEMPS''@|$(HAVE_MKOSTEMPS)|g' \
- -e 's|@''HAVE_MKSTEMP''@|$(HAVE_MKSTEMP)|g' \
- -e 's|@''HAVE_MKSTEMPS''@|$(HAVE_MKSTEMPS)|g' \
- -e 's|@''HAVE_POSIX_OPENPT''@|$(HAVE_POSIX_OPENPT)|g' \
- -e 's|@''HAVE_PTSNAME''@|$(HAVE_PTSNAME)|g' \
- -e 's|@''HAVE_PTSNAME_R''@|$(HAVE_PTSNAME_R)|g' \
- -e 's|@''HAVE_RANDOM''@|$(HAVE_RANDOM)|g' \
- -e 's|@''HAVE_RANDOM_H''@|$(HAVE_RANDOM_H)|g' \
- -e 's|@''HAVE_RANDOM_R''@|$(HAVE_RANDOM_R)|g' \
- -e 's|@''HAVE_REALPATH''@|$(HAVE_REALPATH)|g' \
- -e 's|@''HAVE_RPMATCH''@|$(HAVE_RPMATCH)|g' \
- -e 's|@''HAVE_DECL_SETENV''@|$(HAVE_DECL_SETENV)|g' \
- -e 's|@''HAVE_STRTOD''@|$(HAVE_STRTOD)|g' \
- -e 's|@''HAVE_STRTOLL''@|$(HAVE_STRTOLL)|g' \
- -e 's|@''HAVE_STRTOULL''@|$(HAVE_STRTOULL)|g' \
- -e 's|@''HAVE_STRUCT_RANDOM_DATA''@|$(HAVE_STRUCT_RANDOM_DATA)|g' \
- -e 's|@''HAVE_SYS_LOADAVG_H''@|$(HAVE_SYS_LOADAVG_H)|g' \
- -e 's|@''HAVE_UNLOCKPT''@|$(HAVE_UNLOCKPT)|g' \
- -e 's|@''HAVE_DECL_UNSETENV''@|$(HAVE_DECL_UNSETENV)|g' \
- -e 's|@''REPLACE_CALLOC''@|$(REPLACE_CALLOC)|g' \
- -e 's|@''REPLACE_CANONICALIZE_FILE_NAME''@|$(REPLACE_CANONICALIZE_FILE_NAME)|g' \
- -e 's|@''REPLACE_MALLOC''@|$(REPLACE_MALLOC)|g' \
- -e 's|@''REPLACE_MBTOWC''@|$(REPLACE_MBTOWC)|g' \
- -e 's|@''REPLACE_MKSTEMP''@|$(REPLACE_MKSTEMP)|g' \
- -e 's|@''REPLACE_PTSNAME_R''@|$(REPLACE_PTSNAME_R)|g' \
- -e 's|@''REPLACE_PUTENV''@|$(REPLACE_PUTENV)|g' \
- -e 's|@''REPLACE_RANDOM_R''@|$(REPLACE_RANDOM_R)|g' \
- -e 's|@''REPLACE_REALLOC''@|$(REPLACE_REALLOC)|g' \
- -e 's|@''REPLACE_REALPATH''@|$(REPLACE_REALPATH)|g' \
- -e 's|@''REPLACE_SETENV''@|$(REPLACE_SETENV)|g' \
- -e 's|@''REPLACE_STRTOD''@|$(REPLACE_STRTOD)|g' \
- -e 's|@''REPLACE_UNSETENV''@|$(REPLACE_UNSETENV)|g' \
- -e 's|@''REPLACE_WCTOMB''@|$(REPLACE_WCTOMB)|g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _Noreturn/r $(_NORETURN_H)' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \
- } > $@-t && \
- mv $@-t $@
-MOSTLYCLEANFILES += stdlib.h stdlib.h-t
-
-EXTRA_DIST += stdlib.in.h
-
-## end gnulib module stdlib
-
-## begin gnulib module streq
-
-
-EXTRA_DIST += streq.h
-
-## end gnulib module streq
-
-## begin gnulib module strerror
-
-
-EXTRA_DIST += strerror.c
-
-EXTRA_libhello_a_SOURCES += strerror.c
-
-## end gnulib module strerror
-
-## begin gnulib module strerror-override
-
-
-EXTRA_DIST += strerror-override.c strerror-override.h
-
-EXTRA_libhello_a_SOURCES += strerror-override.c
-
-## end gnulib module strerror-override
-
-## begin gnulib module string
-
-BUILT_SOURCES += string.h
-
-# We need the following in order to create <string.h> when the system
-# doesn't have one that works with the given compiler.
-string.h: string.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_STRING_H''@|$(NEXT_STRING_H)|g' \
- -e 's/@''GNULIB_FFSL''@/$(GNULIB_FFSL)/g' \
- -e 's/@''GNULIB_FFSLL''@/$(GNULIB_FFSLL)/g' \
- -e 's/@''GNULIB_MBSLEN''@/$(GNULIB_MBSLEN)/g' \
- -e 's/@''GNULIB_MBSNLEN''@/$(GNULIB_MBSNLEN)/g' \
- -e 's/@''GNULIB_MBSCHR''@/$(GNULIB_MBSCHR)/g' \
- -e 's/@''GNULIB_MBSRCHR''@/$(GNULIB_MBSRCHR)/g' \
- -e 's/@''GNULIB_MBSSTR''@/$(GNULIB_MBSSTR)/g' \
- -e 's/@''GNULIB_MBSCASECMP''@/$(GNULIB_MBSCASECMP)/g' \
- -e 's/@''GNULIB_MBSNCASECMP''@/$(GNULIB_MBSNCASECMP)/g' \
- -e 's/@''GNULIB_MBSPCASECMP''@/$(GNULIB_MBSPCASECMP)/g' \
- -e 's/@''GNULIB_MBSCASESTR''@/$(GNULIB_MBSCASESTR)/g' \
- -e 's/@''GNULIB_MBSCSPN''@/$(GNULIB_MBSCSPN)/g' \
- -e 's/@''GNULIB_MBSPBRK''@/$(GNULIB_MBSPBRK)/g' \
- -e 's/@''GNULIB_MBSSPN''@/$(GNULIB_MBSSPN)/g' \
- -e 's/@''GNULIB_MBSSEP''@/$(GNULIB_MBSSEP)/g' \
- -e 's/@''GNULIB_MBSTOK_R''@/$(GNULIB_MBSTOK_R)/g' \
- -e 's/@''GNULIB_MEMCHR''@/$(GNULIB_MEMCHR)/g' \
- -e 's/@''GNULIB_MEMMEM''@/$(GNULIB_MEMMEM)/g' \
- -e 's/@''GNULIB_MEMPCPY''@/$(GNULIB_MEMPCPY)/g' \
- -e 's/@''GNULIB_MEMRCHR''@/$(GNULIB_MEMRCHR)/g' \
- -e 's/@''GNULIB_RAWMEMCHR''@/$(GNULIB_RAWMEMCHR)/g' \
- -e 's/@''GNULIB_STPCPY''@/$(GNULIB_STPCPY)/g' \
- -e 's/@''GNULIB_STPNCPY''@/$(GNULIB_STPNCPY)/g' \
- -e 's/@''GNULIB_STRCHRNUL''@/$(GNULIB_STRCHRNUL)/g' \
- -e 's/@''GNULIB_STRDUP''@/$(GNULIB_STRDUP)/g' \
- -e 's/@''GNULIB_STRNCAT''@/$(GNULIB_STRNCAT)/g' \
- -e 's/@''GNULIB_STRNDUP''@/$(GNULIB_STRNDUP)/g' \
- -e 's/@''GNULIB_STRNLEN''@/$(GNULIB_STRNLEN)/g' \
- -e 's/@''GNULIB_STRPBRK''@/$(GNULIB_STRPBRK)/g' \
- -e 's/@''GNULIB_STRSEP''@/$(GNULIB_STRSEP)/g' \
- -e 's/@''GNULIB_STRSTR''@/$(GNULIB_STRSTR)/g' \
- -e 's/@''GNULIB_STRCASESTR''@/$(GNULIB_STRCASESTR)/g' \
- -e 's/@''GNULIB_STRTOK_R''@/$(GNULIB_STRTOK_R)/g' \
- -e 's/@''GNULIB_STRERROR''@/$(GNULIB_STRERROR)/g' \
- -e 's/@''GNULIB_STRERROR_R''@/$(GNULIB_STRERROR_R)/g' \
- -e 's/@''GNULIB_STRSIGNAL''@/$(GNULIB_STRSIGNAL)/g' \
- -e 's/@''GNULIB_STRVERSCMP''@/$(GNULIB_STRVERSCMP)/g' \
- < $(srcdir)/string.in.h | \
- sed -e 's|@''HAVE_FFSL''@|$(HAVE_FFSL)|g' \
- -e 's|@''HAVE_FFSLL''@|$(HAVE_FFSLL)|g' \
- -e 's|@''HAVE_MBSLEN''@|$(HAVE_MBSLEN)|g' \
- -e 's|@''HAVE_MEMCHR''@|$(HAVE_MEMCHR)|g' \
- -e 's|@''HAVE_DECL_MEMMEM''@|$(HAVE_DECL_MEMMEM)|g' \
- -e 's|@''HAVE_MEMPCPY''@|$(HAVE_MEMPCPY)|g' \
- -e 's|@''HAVE_DECL_MEMRCHR''@|$(HAVE_DECL_MEMRCHR)|g' \
- -e 's|@''HAVE_RAWMEMCHR''@|$(HAVE_RAWMEMCHR)|g' \
- -e 's|@''HAVE_STPCPY''@|$(HAVE_STPCPY)|g' \
- -e 's|@''HAVE_STPNCPY''@|$(HAVE_STPNCPY)|g' \
- -e 's|@''HAVE_STRCHRNUL''@|$(HAVE_STRCHRNUL)|g' \
- -e 's|@''HAVE_DECL_STRDUP''@|$(HAVE_DECL_STRDUP)|g' \
- -e 's|@''HAVE_DECL_STRNDUP''@|$(HAVE_DECL_STRNDUP)|g' \
- -e 's|@''HAVE_DECL_STRNLEN''@|$(HAVE_DECL_STRNLEN)|g' \
- -e 's|@''HAVE_STRPBRK''@|$(HAVE_STRPBRK)|g' \
- -e 's|@''HAVE_STRSEP''@|$(HAVE_STRSEP)|g' \
- -e 's|@''HAVE_STRCASESTR''@|$(HAVE_STRCASESTR)|g' \
- -e 's|@''HAVE_DECL_STRTOK_R''@|$(HAVE_DECL_STRTOK_R)|g' \
- -e 's|@''HAVE_DECL_STRERROR_R''@|$(HAVE_DECL_STRERROR_R)|g' \
- -e 's|@''HAVE_DECL_STRSIGNAL''@|$(HAVE_DECL_STRSIGNAL)|g' \
- -e 's|@''HAVE_STRVERSCMP''@|$(HAVE_STRVERSCMP)|g' \
- -e 's|@''REPLACE_STPNCPY''@|$(REPLACE_STPNCPY)|g' \
- -e 's|@''REPLACE_MEMCHR''@|$(REPLACE_MEMCHR)|g' \
- -e 's|@''REPLACE_MEMMEM''@|$(REPLACE_MEMMEM)|g' \
- -e 's|@''REPLACE_STRCASESTR''@|$(REPLACE_STRCASESTR)|g' \
- -e 's|@''REPLACE_STRCHRNUL''@|$(REPLACE_STRCHRNUL)|g' \
- -e 's|@''REPLACE_STRDUP''@|$(REPLACE_STRDUP)|g' \
- -e 's|@''REPLACE_STRSTR''@|$(REPLACE_STRSTR)|g' \
- -e 's|@''REPLACE_STRERROR''@|$(REPLACE_STRERROR)|g' \
- -e 's|@''REPLACE_STRERROR_R''@|$(REPLACE_STRERROR_R)|g' \
- -e 's|@''REPLACE_STRNCAT''@|$(REPLACE_STRNCAT)|g' \
- -e 's|@''REPLACE_STRNDUP''@|$(REPLACE_STRNDUP)|g' \
- -e 's|@''REPLACE_STRNLEN''@|$(REPLACE_STRNLEN)|g' \
- -e 's|@''REPLACE_STRSIGNAL''@|$(REPLACE_STRSIGNAL)|g' \
- -e 's|@''REPLACE_STRTOK_R''@|$(REPLACE_STRTOK_R)|g' \
- -e 's|@''UNDEFINE_STRTOK_R''@|$(UNDEFINE_STRTOK_R)|g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \
- < $(srcdir)/string.in.h; \
- } > $@-t && \
- mv $@-t $@
-MOSTLYCLEANFILES += string.h string.h-t
-
-EXTRA_DIST += string.in.h
-
-## end gnulib module string
-
-## begin gnulib module unistd
-
-BUILT_SOURCES += unistd.h
-
-# We need the following in order to create an empty placeholder for
-# <unistd.h> when the system doesn't have one.
-unistd.h: unistd.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''HAVE_UNISTD_H''@|$(HAVE_UNISTD_H)|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_UNISTD_H''@|$(NEXT_UNISTD_H)|g' \
- -e 's/@''GNULIB_CHDIR''@/$(GNULIB_CHDIR)/g' \
- -e 's/@''GNULIB_CHOWN''@/$(GNULIB_CHOWN)/g' \
- -e 's/@''GNULIB_CLOSE''@/$(GNULIB_CLOSE)/g' \
- -e 's/@''GNULIB_DUP''@/$(GNULIB_DUP)/g' \
- -e 's/@''GNULIB_DUP2''@/$(GNULIB_DUP2)/g' \
- -e 's/@''GNULIB_DUP3''@/$(GNULIB_DUP3)/g' \
- -e 's/@''GNULIB_ENVIRON''@/$(GNULIB_ENVIRON)/g' \
- -e 's/@''GNULIB_EUIDACCESS''@/$(GNULIB_EUIDACCESS)/g' \
- -e 's/@''GNULIB_FACCESSAT''@/$(GNULIB_FACCESSAT)/g' \
- -e 's/@''GNULIB_FCHDIR''@/$(GNULIB_FCHDIR)/g' \
- -e 's/@''GNULIB_FCHOWNAT''@/$(GNULIB_FCHOWNAT)/g' \
- -e 's/@''GNULIB_FDATASYNC''@/$(GNULIB_FDATASYNC)/g' \
- -e 's/@''GNULIB_FSYNC''@/$(GNULIB_FSYNC)/g' \
- -e 's/@''GNULIB_FTRUNCATE''@/$(GNULIB_FTRUNCATE)/g' \
- -e 's/@''GNULIB_GETCWD''@/$(GNULIB_GETCWD)/g' \
- -e 's/@''GNULIB_GETDOMAINNAME''@/$(GNULIB_GETDOMAINNAME)/g' \
- -e 's/@''GNULIB_GETDTABLESIZE''@/$(GNULIB_GETDTABLESIZE)/g' \
- -e 's/@''GNULIB_GETGROUPS''@/$(GNULIB_GETGROUPS)/g' \
- -e 's/@''GNULIB_GETHOSTNAME''@/$(GNULIB_GETHOSTNAME)/g' \
- -e 's/@''GNULIB_GETLOGIN''@/$(GNULIB_GETLOGIN)/g' \
- -e 's/@''GNULIB_GETLOGIN_R''@/$(GNULIB_GETLOGIN_R)/g' \
- -e 's/@''GNULIB_GETPAGESIZE''@/$(GNULIB_GETPAGESIZE)/g' \
- -e 's/@''GNULIB_GETUSERSHELL''@/$(GNULIB_GETUSERSHELL)/g' \
- -e 's/@''GNULIB_GROUP_MEMBER''@/$(GNULIB_GROUP_MEMBER)/g' \
- -e 's/@''GNULIB_ISATTY''@/$(GNULIB_ISATTY)/g' \
- -e 's/@''GNULIB_LCHOWN''@/$(GNULIB_LCHOWN)/g' \
- -e 's/@''GNULIB_LINK''@/$(GNULIB_LINK)/g' \
- -e 's/@''GNULIB_LINKAT''@/$(GNULIB_LINKAT)/g' \
- -e 's/@''GNULIB_LSEEK''@/$(GNULIB_LSEEK)/g' \
- -e 's/@''GNULIB_PIPE''@/$(GNULIB_PIPE)/g' \
- -e 's/@''GNULIB_PIPE2''@/$(GNULIB_PIPE2)/g' \
- -e 's/@''GNULIB_PREAD''@/$(GNULIB_PREAD)/g' \
- -e 's/@''GNULIB_PWRITE''@/$(GNULIB_PWRITE)/g' \
- -e 's/@''GNULIB_READ''@/$(GNULIB_READ)/g' \
- -e 's/@''GNULIB_READLINK''@/$(GNULIB_READLINK)/g' \
- -e 's/@''GNULIB_READLINKAT''@/$(GNULIB_READLINKAT)/g' \
- -e 's/@''GNULIB_RMDIR''@/$(GNULIB_RMDIR)/g' \
- -e 's/@''GNULIB_SETHOSTNAME''@/$(GNULIB_SETHOSTNAME)/g' \
- -e 's/@''GNULIB_SLEEP''@/$(GNULIB_SLEEP)/g' \
- -e 's/@''GNULIB_SYMLINK''@/$(GNULIB_SYMLINK)/g' \
- -e 's/@''GNULIB_SYMLINKAT''@/$(GNULIB_SYMLINKAT)/g' \
- -e 's/@''GNULIB_TTYNAME_R''@/$(GNULIB_TTYNAME_R)/g' \
- -e 's/@''GNULIB_UNISTD_H_GETOPT''@/0$(GNULIB_GL_UNISTD_H_GETOPT)/g' \
- -e 's/@''GNULIB_UNISTD_H_NONBLOCKING''@/$(GNULIB_UNISTD_H_NONBLOCKING)/g' \
- -e 's/@''GNULIB_UNISTD_H_SIGPIPE''@/$(GNULIB_UNISTD_H_SIGPIPE)/g' \
- -e 's/@''GNULIB_UNLINK''@/$(GNULIB_UNLINK)/g' \
- -e 's/@''GNULIB_UNLINKAT''@/$(GNULIB_UNLINKAT)/g' \
- -e 's/@''GNULIB_USLEEP''@/$(GNULIB_USLEEP)/g' \
- -e 's/@''GNULIB_WRITE''@/$(GNULIB_WRITE)/g' \
- < $(srcdir)/unistd.in.h | \
- sed -e 's|@''HAVE_CHOWN''@|$(HAVE_CHOWN)|g' \
- -e 's|@''HAVE_DUP2''@|$(HAVE_DUP2)|g' \
- -e 's|@''HAVE_DUP3''@|$(HAVE_DUP3)|g' \
- -e 's|@''HAVE_EUIDACCESS''@|$(HAVE_EUIDACCESS)|g' \
- -e 's|@''HAVE_FACCESSAT''@|$(HAVE_FACCESSAT)|g' \
- -e 's|@''HAVE_FCHDIR''@|$(HAVE_FCHDIR)|g' \
- -e 's|@''HAVE_FCHOWNAT''@|$(HAVE_FCHOWNAT)|g' \
- -e 's|@''HAVE_FDATASYNC''@|$(HAVE_FDATASYNC)|g' \
- -e 's|@''HAVE_FSYNC''@|$(HAVE_FSYNC)|g' \
- -e 's|@''HAVE_FTRUNCATE''@|$(HAVE_FTRUNCATE)|g' \
- -e 's|@''HAVE_GETDTABLESIZE''@|$(HAVE_GETDTABLESIZE)|g' \
- -e 's|@''HAVE_GETGROUPS''@|$(HAVE_GETGROUPS)|g' \
- -e 's|@''HAVE_GETHOSTNAME''@|$(HAVE_GETHOSTNAME)|g' \
- -e 's|@''HAVE_GETLOGIN''@|$(HAVE_GETLOGIN)|g' \
- -e 's|@''HAVE_GETPAGESIZE''@|$(HAVE_GETPAGESIZE)|g' \
- -e 's|@''HAVE_GROUP_MEMBER''@|$(HAVE_GROUP_MEMBER)|g' \
- -e 's|@''HAVE_LCHOWN''@|$(HAVE_LCHOWN)|g' \
- -e 's|@''HAVE_LINK''@|$(HAVE_LINK)|g' \
- -e 's|@''HAVE_LINKAT''@|$(HAVE_LINKAT)|g' \
- -e 's|@''HAVE_PIPE''@|$(HAVE_PIPE)|g' \
- -e 's|@''HAVE_PIPE2''@|$(HAVE_PIPE2)|g' \
- -e 's|@''HAVE_PREAD''@|$(HAVE_PREAD)|g' \
- -e 's|@''HAVE_PWRITE''@|$(HAVE_PWRITE)|g' \
- -e 's|@''HAVE_READLINK''@|$(HAVE_READLINK)|g' \
- -e 's|@''HAVE_READLINKAT''@|$(HAVE_READLINKAT)|g' \
- -e 's|@''HAVE_SETHOSTNAME''@|$(HAVE_SETHOSTNAME)|g' \
- -e 's|@''HAVE_SLEEP''@|$(HAVE_SLEEP)|g' \
- -e 's|@''HAVE_SYMLINK''@|$(HAVE_SYMLINK)|g' \
- -e 's|@''HAVE_SYMLINKAT''@|$(HAVE_SYMLINKAT)|g' \
- -e 's|@''HAVE_UNLINKAT''@|$(HAVE_UNLINKAT)|g' \
- -e 's|@''HAVE_USLEEP''@|$(HAVE_USLEEP)|g' \
- -e 's|@''HAVE_DECL_ENVIRON''@|$(HAVE_DECL_ENVIRON)|g' \
- -e 's|@''HAVE_DECL_FCHDIR''@|$(HAVE_DECL_FCHDIR)|g' \
- -e 's|@''HAVE_DECL_FDATASYNC''@|$(HAVE_DECL_FDATASYNC)|g' \
- -e 's|@''HAVE_DECL_GETDOMAINNAME''@|$(HAVE_DECL_GETDOMAINNAME)|g' \
- -e 's|@''HAVE_DECL_GETLOGIN_R''@|$(HAVE_DECL_GETLOGIN_R)|g' \
- -e 's|@''HAVE_DECL_GETPAGESIZE''@|$(HAVE_DECL_GETPAGESIZE)|g' \
- -e 's|@''HAVE_DECL_GETUSERSHELL''@|$(HAVE_DECL_GETUSERSHELL)|g' \
- -e 's|@''HAVE_DECL_SETHOSTNAME''@|$(HAVE_DECL_SETHOSTNAME)|g' \
- -e 's|@''HAVE_DECL_TTYNAME_R''@|$(HAVE_DECL_TTYNAME_R)|g' \
- -e 's|@''HAVE_OS_H''@|$(HAVE_OS_H)|g' \
- -e 's|@''HAVE_SYS_PARAM_H''@|$(HAVE_SYS_PARAM_H)|g' \
- | \
- sed -e 's|@''REPLACE_CHOWN''@|$(REPLACE_CHOWN)|g' \
- -e 's|@''REPLACE_CLOSE''@|$(REPLACE_CLOSE)|g' \
- -e 's|@''REPLACE_DUP''@|$(REPLACE_DUP)|g' \
- -e 's|@''REPLACE_DUP2''@|$(REPLACE_DUP2)|g' \
- -e 's|@''REPLACE_FCHOWNAT''@|$(REPLACE_FCHOWNAT)|g' \
- -e 's|@''REPLACE_GETCWD''@|$(REPLACE_GETCWD)|g' \
- -e 's|@''REPLACE_GETDOMAINNAME''@|$(REPLACE_GETDOMAINNAME)|g' \
- -e 's|@''REPLACE_GETLOGIN_R''@|$(REPLACE_GETLOGIN_R)|g' \
- -e 's|@''REPLACE_GETGROUPS''@|$(REPLACE_GETGROUPS)|g' \
- -e 's|@''REPLACE_GETPAGESIZE''@|$(REPLACE_GETPAGESIZE)|g' \
- -e 's|@''REPLACE_ISATTY''@|$(REPLACE_ISATTY)|g' \
- -e 's|@''REPLACE_LCHOWN''@|$(REPLACE_LCHOWN)|g' \
- -e 's|@''REPLACE_LINK''@|$(REPLACE_LINK)|g' \
- -e 's|@''REPLACE_LINKAT''@|$(REPLACE_LINKAT)|g' \
- -e 's|@''REPLACE_LSEEK''@|$(REPLACE_LSEEK)|g' \
- -e 's|@''REPLACE_PREAD''@|$(REPLACE_PREAD)|g' \
- -e 's|@''REPLACE_PWRITE''@|$(REPLACE_PWRITE)|g' \
- -e 's|@''REPLACE_READ''@|$(REPLACE_READ)|g' \
- -e 's|@''REPLACE_READLINK''@|$(REPLACE_READLINK)|g' \
- -e 's|@''REPLACE_RMDIR''@|$(REPLACE_RMDIR)|g' \
- -e 's|@''REPLACE_SLEEP''@|$(REPLACE_SLEEP)|g' \
- -e 's|@''REPLACE_SYMLINK''@|$(REPLACE_SYMLINK)|g' \
- -e 's|@''REPLACE_TTYNAME_R''@|$(REPLACE_TTYNAME_R)|g' \
- -e 's|@''REPLACE_UNLINK''@|$(REPLACE_UNLINK)|g' \
- -e 's|@''REPLACE_UNLINKAT''@|$(REPLACE_UNLINKAT)|g' \
- -e 's|@''REPLACE_USLEEP''@|$(REPLACE_USLEEP)|g' \
- -e 's|@''REPLACE_WRITE''@|$(REPLACE_WRITE)|g' \
- -e 's|@''UNISTD_H_HAVE_WINSOCK2_H''@|$(UNISTD_H_HAVE_WINSOCK2_H)|g' \
- -e 's|@''UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS''@|$(UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS)|g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \
- } > $@-t && \
- mv $@-t $@
-MOSTLYCLEANFILES += unistd.h unistd.h-t
-
-EXTRA_DIST += unistd.in.h
-
-## end gnulib module unistd
-
-## begin gnulib module useless-if-before-free
-
-
-EXTRA_DIST += $(top_srcdir)/build-aux/useless-if-before-free
-
-## end gnulib module useless-if-before-free
-
-## begin gnulib module vc-list-files
-
-
-EXTRA_DIST += $(top_srcdir)/build-aux/vc-list-files
-
-## end gnulib module vc-list-files
-
-## begin gnulib module verify
-
-
-EXTRA_DIST += verify.h
-
-## end gnulib module verify
-
-## begin gnulib module wchar
-
-BUILT_SOURCES += wchar.h
-
-# We need the following in order to create <wchar.h> when the system
-# version does not work standalone.
-wchar.h: wchar.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''HAVE_FEATURES_H''@|$(HAVE_FEATURES_H)|g' \
- -e 's|@''NEXT_WCHAR_H''@|$(NEXT_WCHAR_H)|g' \
- -e 's|@''HAVE_WCHAR_H''@|$(HAVE_WCHAR_H)|g' \
- -e 's/@''GNULIB_BTOWC''@/$(GNULIB_BTOWC)/g' \
- -e 's/@''GNULIB_WCTOB''@/$(GNULIB_WCTOB)/g' \
- -e 's/@''GNULIB_MBSINIT''@/$(GNULIB_MBSINIT)/g' \
- -e 's/@''GNULIB_MBRTOWC''@/$(GNULIB_MBRTOWC)/g' \
- -e 's/@''GNULIB_MBRLEN''@/$(GNULIB_MBRLEN)/g' \
- -e 's/@''GNULIB_MBSRTOWCS''@/$(GNULIB_MBSRTOWCS)/g' \
- -e 's/@''GNULIB_MBSNRTOWCS''@/$(GNULIB_MBSNRTOWCS)/g' \
- -e 's/@''GNULIB_WCRTOMB''@/$(GNULIB_WCRTOMB)/g' \
- -e 's/@''GNULIB_WCSRTOMBS''@/$(GNULIB_WCSRTOMBS)/g' \
- -e 's/@''GNULIB_WCSNRTOMBS''@/$(GNULIB_WCSNRTOMBS)/g' \
- -e 's/@''GNULIB_WCWIDTH''@/$(GNULIB_WCWIDTH)/g' \
- -e 's/@''GNULIB_WMEMCHR''@/$(GNULIB_WMEMCHR)/g' \
- -e 's/@''GNULIB_WMEMCMP''@/$(GNULIB_WMEMCMP)/g' \
- -e 's/@''GNULIB_WMEMCPY''@/$(GNULIB_WMEMCPY)/g' \
- -e 's/@''GNULIB_WMEMMOVE''@/$(GNULIB_WMEMMOVE)/g' \
- -e 's/@''GNULIB_WMEMSET''@/$(GNULIB_WMEMSET)/g' \
- -e 's/@''GNULIB_WCSLEN''@/$(GNULIB_WCSLEN)/g' \
- -e 's/@''GNULIB_WCSNLEN''@/$(GNULIB_WCSNLEN)/g' \
- -e 's/@''GNULIB_WCSCPY''@/$(GNULIB_WCSCPY)/g' \
- -e 's/@''GNULIB_WCPCPY''@/$(GNULIB_WCPCPY)/g' \
- -e 's/@''GNULIB_WCSNCPY''@/$(GNULIB_WCSNCPY)/g' \
- -e 's/@''GNULIB_WCPNCPY''@/$(GNULIB_WCPNCPY)/g' \
- -e 's/@''GNULIB_WCSCAT''@/$(GNULIB_WCSCAT)/g' \
- -e 's/@''GNULIB_WCSNCAT''@/$(GNULIB_WCSNCAT)/g' \
- -e 's/@''GNULIB_WCSCMP''@/$(GNULIB_WCSCMP)/g' \
- -e 's/@''GNULIB_WCSNCMP''@/$(GNULIB_WCSNCMP)/g' \
- -e 's/@''GNULIB_WCSCASECMP''@/$(GNULIB_WCSCASECMP)/g' \
- -e 's/@''GNULIB_WCSNCASECMP''@/$(GNULIB_WCSNCASECMP)/g' \
- -e 's/@''GNULIB_WCSCOLL''@/$(GNULIB_WCSCOLL)/g' \
- -e 's/@''GNULIB_WCSXFRM''@/$(GNULIB_WCSXFRM)/g' \
- -e 's/@''GNULIB_WCSDUP''@/$(GNULIB_WCSDUP)/g' \
- -e 's/@''GNULIB_WCSCHR''@/$(GNULIB_WCSCHR)/g' \
- -e 's/@''GNULIB_WCSRCHR''@/$(GNULIB_WCSRCHR)/g' \
- -e 's/@''GNULIB_WCSCSPN''@/$(GNULIB_WCSCSPN)/g' \
- -e 's/@''GNULIB_WCSSPN''@/$(GNULIB_WCSSPN)/g' \
- -e 's/@''GNULIB_WCSPBRK''@/$(GNULIB_WCSPBRK)/g' \
- -e 's/@''GNULIB_WCSSTR''@/$(GNULIB_WCSSTR)/g' \
- -e 's/@''GNULIB_WCSTOK''@/$(GNULIB_WCSTOK)/g' \
- -e 's/@''GNULIB_WCSWIDTH''@/$(GNULIB_WCSWIDTH)/g' \
- < $(srcdir)/wchar.in.h | \
- sed -e 's|@''HAVE_WINT_T''@|$(HAVE_WINT_T)|g' \
- -e 's|@''HAVE_BTOWC''@|$(HAVE_BTOWC)|g' \
- -e 's|@''HAVE_MBSINIT''@|$(HAVE_MBSINIT)|g' \
- -e 's|@''HAVE_MBRTOWC''@|$(HAVE_MBRTOWC)|g' \
- -e 's|@''HAVE_MBRLEN''@|$(HAVE_MBRLEN)|g' \
- -e 's|@''HAVE_MBSRTOWCS''@|$(HAVE_MBSRTOWCS)|g' \
- -e 's|@''HAVE_MBSNRTOWCS''@|$(HAVE_MBSNRTOWCS)|g' \
- -e 's|@''HAVE_WCRTOMB''@|$(HAVE_WCRTOMB)|g' \
- -e 's|@''HAVE_WCSRTOMBS''@|$(HAVE_WCSRTOMBS)|g' \
- -e 's|@''HAVE_WCSNRTOMBS''@|$(HAVE_WCSNRTOMBS)|g' \
- -e 's|@''HAVE_WMEMCHR''@|$(HAVE_WMEMCHR)|g' \
- -e 's|@''HAVE_WMEMCMP''@|$(HAVE_WMEMCMP)|g' \
- -e 's|@''HAVE_WMEMCPY''@|$(HAVE_WMEMCPY)|g' \
- -e 's|@''HAVE_WMEMMOVE''@|$(HAVE_WMEMMOVE)|g' \
- -e 's|@''HAVE_WMEMSET''@|$(HAVE_WMEMSET)|g' \
- -e 's|@''HAVE_WCSLEN''@|$(HAVE_WCSLEN)|g' \
- -e 's|@''HAVE_WCSNLEN''@|$(HAVE_WCSNLEN)|g' \
- -e 's|@''HAVE_WCSCPY''@|$(HAVE_WCSCPY)|g' \
- -e 's|@''HAVE_WCPCPY''@|$(HAVE_WCPCPY)|g' \
- -e 's|@''HAVE_WCSNCPY''@|$(HAVE_WCSNCPY)|g' \
- -e 's|@''HAVE_WCPNCPY''@|$(HAVE_WCPNCPY)|g' \
- -e 's|@''HAVE_WCSCAT''@|$(HAVE_WCSCAT)|g' \
- -e 's|@''HAVE_WCSNCAT''@|$(HAVE_WCSNCAT)|g' \
- -e 's|@''HAVE_WCSCMP''@|$(HAVE_WCSCMP)|g' \
- -e 's|@''HAVE_WCSNCMP''@|$(HAVE_WCSNCMP)|g' \
- -e 's|@''HAVE_WCSCASECMP''@|$(HAVE_WCSCASECMP)|g' \
- -e 's|@''HAVE_WCSNCASECMP''@|$(HAVE_WCSNCASECMP)|g' \
- -e 's|@''HAVE_WCSCOLL''@|$(HAVE_WCSCOLL)|g' \
- -e 's|@''HAVE_WCSXFRM''@|$(HAVE_WCSXFRM)|g' \
- -e 's|@''HAVE_WCSDUP''@|$(HAVE_WCSDUP)|g' \
- -e 's|@''HAVE_WCSCHR''@|$(HAVE_WCSCHR)|g' \
- -e 's|@''HAVE_WCSRCHR''@|$(HAVE_WCSRCHR)|g' \
- -e 's|@''HAVE_WCSCSPN''@|$(HAVE_WCSCSPN)|g' \
- -e 's|@''HAVE_WCSSPN''@|$(HAVE_WCSSPN)|g' \
- -e 's|@''HAVE_WCSPBRK''@|$(HAVE_WCSPBRK)|g' \
- -e 's|@''HAVE_WCSSTR''@|$(HAVE_WCSSTR)|g' \
- -e 's|@''HAVE_WCSTOK''@|$(HAVE_WCSTOK)|g' \
- -e 's|@''HAVE_WCSWIDTH''@|$(HAVE_WCSWIDTH)|g' \
- -e 's|@''HAVE_DECL_WCTOB''@|$(HAVE_DECL_WCTOB)|g' \
- -e 's|@''HAVE_DECL_WCWIDTH''@|$(HAVE_DECL_WCWIDTH)|g' \
- | \
- sed -e 's|@''REPLACE_MBSTATE_T''@|$(REPLACE_MBSTATE_T)|g' \
- -e 's|@''REPLACE_BTOWC''@|$(REPLACE_BTOWC)|g' \
- -e 's|@''REPLACE_WCTOB''@|$(REPLACE_WCTOB)|g' \
- -e 's|@''REPLACE_MBSINIT''@|$(REPLACE_MBSINIT)|g' \
- -e 's|@''REPLACE_MBRTOWC''@|$(REPLACE_MBRTOWC)|g' \
- -e 's|@''REPLACE_MBRLEN''@|$(REPLACE_MBRLEN)|g' \
- -e 's|@''REPLACE_MBSRTOWCS''@|$(REPLACE_MBSRTOWCS)|g' \
- -e 's|@''REPLACE_MBSNRTOWCS''@|$(REPLACE_MBSNRTOWCS)|g' \
- -e 's|@''REPLACE_WCRTOMB''@|$(REPLACE_WCRTOMB)|g' \
- -e 's|@''REPLACE_WCSRTOMBS''@|$(REPLACE_WCSRTOMBS)|g' \
- -e 's|@''REPLACE_WCSNRTOMBS''@|$(REPLACE_WCSNRTOMBS)|g' \
- -e 's|@''REPLACE_WCWIDTH''@|$(REPLACE_WCWIDTH)|g' \
- -e 's|@''REPLACE_WCSWIDTH''@|$(REPLACE_WCSWIDTH)|g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \
- } > $@-t && \
- mv $@-t $@
-MOSTLYCLEANFILES += wchar.h wchar.h-t
-
-EXTRA_DIST += wchar.in.h
-
-## end gnulib module wchar
-
-## begin gnulib module wctype-h
-
-BUILT_SOURCES += wctype.h
-
-# We need the following in order to create <wctype.h> when the system
-# doesn't have one that works with the given compiler.
-wctype.h: wctype.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's/@''HAVE_WCTYPE_H''@/$(HAVE_WCTYPE_H)/g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_WCTYPE_H''@|$(NEXT_WCTYPE_H)|g' \
- -e 's/@''GNULIB_ISWBLANK''@/$(GNULIB_ISWBLANK)/g' \
- -e 's/@''GNULIB_WCTYPE''@/$(GNULIB_WCTYPE)/g' \
- -e 's/@''GNULIB_ISWCTYPE''@/$(GNULIB_ISWCTYPE)/g' \
- -e 's/@''GNULIB_WCTRANS''@/$(GNULIB_WCTRANS)/g' \
- -e 's/@''GNULIB_TOWCTRANS''@/$(GNULIB_TOWCTRANS)/g' \
- -e 's/@''HAVE_ISWBLANK''@/$(HAVE_ISWBLANK)/g' \
- -e 's/@''HAVE_ISWCNTRL''@/$(HAVE_ISWCNTRL)/g' \
- -e 's/@''HAVE_WCTYPE_T''@/$(HAVE_WCTYPE_T)/g' \
- -e 's/@''HAVE_WCTRANS_T''@/$(HAVE_WCTRANS_T)/g' \
- -e 's/@''HAVE_WINT_T''@/$(HAVE_WINT_T)/g' \
- -e 's/@''REPLACE_ISWBLANK''@/$(REPLACE_ISWBLANK)/g' \
- -e 's/@''REPLACE_ISWCNTRL''@/$(REPLACE_ISWCNTRL)/g' \
- -e 's/@''REPLACE_TOWLOWER''@/$(REPLACE_TOWLOWER)/g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \
- < $(srcdir)/wctype.in.h; \
- } > $@-t && \
- mv $@-t $@
-MOSTLYCLEANFILES += wctype.h wctype.h-t
-
-EXTRA_DIST += wctype.in.h
-
-## end gnulib module wctype-h
-
-## begin gnulib module xalloc
-
-libhello_a_SOURCES += xmalloc.c
-
-EXTRA_DIST += xalloc.h
-
-## end gnulib module xalloc
-
-## begin gnulib module xalloc-die
-
-libhello_a_SOURCES += xalloc-die.c
-
-## end gnulib module xalloc-die
-
-## begin gnulib module xalloc-oversized
-
-
-EXTRA_DIST += xalloc-oversized.h
-
-## end gnulib module xalloc-oversized
-
-
-mostlyclean-local: mostlyclean-generic
- @for dir in '' $(MOSTLYCLEANDIRS); do \
- if test -n "$$dir" && test -d $$dir; then \
- echo "rmdir $$dir"; rmdir $$dir; \
- fi; \
- done; \
- :
+++ /dev/null
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This file is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this file. If not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License,
-# this file may be distributed as part of a program that
-# contains a configuration script generated by Autoconf, under
-# the same distribution terms as the rest of that program.
-#
-# Generated by gnulib-tool.
-# Reproduce by: gnulib-tool --import --dir=. --local-dir=gl --lib=libhello --source-base=lib --m4-base=m4 --doc-base=doc --tests-base=tests --aux-dir=build-aux --no-conditional-dependencies --no-libtool --macro-prefix=gl announce-gen closeout do-release-commit-and-tag fdl gendocs getopt-gnu gettext gnupload maintainer-makefile progname readme-release
-
-
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = lib
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
- $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \
- $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/configmake.m4 \
- $(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \
- $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-o.m4 \
- $(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/getopt.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/gnulib-common.m4 \
- $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \
- $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
- $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/locale-fr.m4 \
- $(top_srcdir)/m4/locale-ja.m4 $(top_srcdir)/m4/locale-zh.m4 \
- $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \
- $(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/msvc-inval.m4 \
- $(top_srcdir)/m4/msvc-nothrow.m4 $(top_srcdir)/m4/nls.m4 \
- $(top_srcdir)/m4/nocrash.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quotearg.m4 \
- $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdbool.m4 \
- $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
- $(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
- $(top_srcdir)/m4/sys_socket_h.m4 $(top_srcdir)/m4/unistd_h.m4 \
- $(top_srcdir)/m4/warn-on-use.m4 $(top_srcdir)/m4/wchar_h.m4 \
- $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype_h.m4 \
- $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-libhello_a_AR = $(AR) $(ARFLAGS)
-am__DEPENDENCIES_1 =
-am_libhello_a_OBJECTS = c-ctype.$(OBJEXT) c-strcasecmp.$(OBJEXT) \
- c-strncasecmp.$(OBJEXT) close-stream.$(OBJEXT) \
- closeout.$(OBJEXT) exitfail.$(OBJEXT) localcharset.$(OBJEXT) \
- progname.$(OBJEXT) quotearg.$(OBJEXT) xmalloc.$(OBJEXT) \
- xalloc-die.$(OBJEXT)
-libhello_a_OBJECTS = $(am_libhello_a_OBJECTS)
-LTLIBRARIES = $(noinst_LTLIBRARIES)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libhello_a_SOURCES) $(EXTRA_libhello_a_SOURCES)
-DIST_SOURCES = $(libhello_a_SOURCES) $(EXTRA_libhello_a_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-HEADERS = $(noinst_HEADERS)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-pkglibexecdir = @pkglibexecdir@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-ARFLAGS = @ARFLAGS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CONFIG_INCLUDE = @CONFIG_INCLUDE@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
-EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
-ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
-ENOLINK_VALUE = @ENOLINK_VALUE@
-EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
-EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
-ERRNO_H = @ERRNO_H@
-EXEEXT = @EXEEXT@
-GETOPT_H = @GETOPT_H@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GNULIB_ATOLL = @GNULIB_ATOLL@
-GNULIB_BTOWC = @GNULIB_BTOWC@
-GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
-GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
-GNULIB_CHDIR = @GNULIB_CHDIR@
-GNULIB_CHOWN = @GNULIB_CHOWN@
-GNULIB_CLOSE = @GNULIB_CLOSE@
-GNULIB_DUP = @GNULIB_DUP@
-GNULIB_DUP2 = @GNULIB_DUP2@
-GNULIB_DUP3 = @GNULIB_DUP3@
-GNULIB_ENVIRON = @GNULIB_ENVIRON@
-GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
-GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
-GNULIB_FCHDIR = @GNULIB_FCHDIR@
-GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
-GNULIB_FDATASYNC = @GNULIB_FDATASYNC@
-GNULIB_FFSL = @GNULIB_FFSL@
-GNULIB_FFSLL = @GNULIB_FFSLL@
-GNULIB_FSYNC = @GNULIB_FSYNC@
-GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
-GNULIB_GETCWD = @GNULIB_GETCWD@
-GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
-GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
-GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
-GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
-GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
-GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
-GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
-GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
-GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
-GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
-GNULIB_GL_UNISTD_H_GETOPT = @GNULIB_GL_UNISTD_H_GETOPT@
-GNULIB_GRANTPT = @GNULIB_GRANTPT@
-GNULIB_GROUP_MEMBER = @GNULIB_GROUP_MEMBER@
-GNULIB_ISATTY = @GNULIB_ISATTY@
-GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
-GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
-GNULIB_LCHOWN = @GNULIB_LCHOWN@
-GNULIB_LINK = @GNULIB_LINK@
-GNULIB_LINKAT = @GNULIB_LINKAT@
-GNULIB_LSEEK = @GNULIB_LSEEK@
-GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
-GNULIB_MBRLEN = @GNULIB_MBRLEN@
-GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
-GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
-GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
-GNULIB_MBSCHR = @GNULIB_MBSCHR@
-GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
-GNULIB_MBSINIT = @GNULIB_MBSINIT@
-GNULIB_MBSLEN = @GNULIB_MBSLEN@
-GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
-GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
-GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
-GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
-GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
-GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
-GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
-GNULIB_MBSSEP = @GNULIB_MBSSEP@
-GNULIB_MBSSPN = @GNULIB_MBSSPN@
-GNULIB_MBSSTR = @GNULIB_MBSSTR@
-GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
-GNULIB_MBTOWC = @GNULIB_MBTOWC@
-GNULIB_MEMCHR = @GNULIB_MEMCHR@
-GNULIB_MEMMEM = @GNULIB_MEMMEM@
-GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
-GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
-GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
-GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
-GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
-GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
-GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
-GNULIB_PIPE = @GNULIB_PIPE@
-GNULIB_PIPE2 = @GNULIB_PIPE2@
-GNULIB_POSIX_OPENPT = @GNULIB_POSIX_OPENPT@
-GNULIB_PREAD = @GNULIB_PREAD@
-GNULIB_PTSNAME = @GNULIB_PTSNAME@
-GNULIB_PTSNAME_R = @GNULIB_PTSNAME_R@
-GNULIB_PUTENV = @GNULIB_PUTENV@
-GNULIB_PWRITE = @GNULIB_PWRITE@
-GNULIB_RANDOM = @GNULIB_RANDOM@
-GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
-GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
-GNULIB_READ = @GNULIB_READ@
-GNULIB_READLINK = @GNULIB_READLINK@
-GNULIB_READLINKAT = @GNULIB_READLINKAT@
-GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
-GNULIB_REALPATH = @GNULIB_REALPATH@
-GNULIB_RMDIR = @GNULIB_RMDIR@
-GNULIB_RPMATCH = @GNULIB_RPMATCH@
-GNULIB_SETENV = @GNULIB_SETENV@
-GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
-GNULIB_SLEEP = @GNULIB_SLEEP@
-GNULIB_STPCPY = @GNULIB_STPCPY@
-GNULIB_STPNCPY = @GNULIB_STPNCPY@
-GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
-GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
-GNULIB_STRDUP = @GNULIB_STRDUP@
-GNULIB_STRERROR = @GNULIB_STRERROR@
-GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
-GNULIB_STRNCAT = @GNULIB_STRNCAT@
-GNULIB_STRNDUP = @GNULIB_STRNDUP@
-GNULIB_STRNLEN = @GNULIB_STRNLEN@
-GNULIB_STRPBRK = @GNULIB_STRPBRK@
-GNULIB_STRSEP = @GNULIB_STRSEP@
-GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
-GNULIB_STRSTR = @GNULIB_STRSTR@
-GNULIB_STRTOD = @GNULIB_STRTOD@
-GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
-GNULIB_STRTOLL = @GNULIB_STRTOLL@
-GNULIB_STRTOULL = @GNULIB_STRTOULL@
-GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
-GNULIB_SYMLINK = @GNULIB_SYMLINK@
-GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
-GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
-GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
-GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
-GNULIB_UNISTD_H_NONBLOCKING = @GNULIB_UNISTD_H_NONBLOCKING@
-GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
-GNULIB_UNLINK = @GNULIB_UNLINK@
-GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
-GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
-GNULIB_UNSETENV = @GNULIB_UNSETENV@
-GNULIB_USLEEP = @GNULIB_USLEEP@
-GNULIB_WCPCPY = @GNULIB_WCPCPY@
-GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
-GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
-GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
-GNULIB_WCSCAT = @GNULIB_WCSCAT@
-GNULIB_WCSCHR = @GNULIB_WCSCHR@
-GNULIB_WCSCMP = @GNULIB_WCSCMP@
-GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
-GNULIB_WCSCPY = @GNULIB_WCSCPY@
-GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
-GNULIB_WCSDUP = @GNULIB_WCSDUP@
-GNULIB_WCSLEN = @GNULIB_WCSLEN@
-GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
-GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
-GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
-GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
-GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
-GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
-GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
-GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
-GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
-GNULIB_WCSSPN = @GNULIB_WCSSPN@
-GNULIB_WCSSTR = @GNULIB_WCSSTR@
-GNULIB_WCSTOK = @GNULIB_WCSTOK@
-GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
-GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
-GNULIB_WCTOB = @GNULIB_WCTOB@
-GNULIB_WCTOMB = @GNULIB_WCTOMB@
-GNULIB_WCTRANS = @GNULIB_WCTRANS@
-GNULIB_WCTYPE = @GNULIB_WCTYPE@
-GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
-GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
-GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
-GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
-GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
-GNULIB_WMEMSET = @GNULIB_WMEMSET@
-GNULIB_WRITE = @GNULIB_WRITE@
-GNULIB__EXIT = @GNULIB__EXIT@
-GREP = @GREP@
-HAVE_ATOLL = @HAVE_ATOLL@
-HAVE_BTOWC = @HAVE_BTOWC@
-HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
-HAVE_CHOWN = @HAVE_CHOWN@
-HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
-HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
-HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
-HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
-HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
-HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
-HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
-HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
-HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
-HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
-HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
-HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
-HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
-HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
-HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
-HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
-HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
-HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
-HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
-HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
-HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
-HAVE_DUP2 = @HAVE_DUP2@
-HAVE_DUP3 = @HAVE_DUP3@
-HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
-HAVE_FACCESSAT = @HAVE_FACCESSAT@
-HAVE_FCHDIR = @HAVE_FCHDIR@
-HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
-HAVE_FDATASYNC = @HAVE_FDATASYNC@
-HAVE_FEATURES_H = @HAVE_FEATURES_H@
-HAVE_FFSL = @HAVE_FFSL@
-HAVE_FFSLL = @HAVE_FFSLL@
-HAVE_FSYNC = @HAVE_FSYNC@
-HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
-HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
-HAVE_GETGROUPS = @HAVE_GETGROUPS@
-HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
-HAVE_GETLOGIN = @HAVE_GETLOGIN@
-HAVE_GETOPT_H = @HAVE_GETOPT_H@
-HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
-HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
-HAVE_GRANTPT = @HAVE_GRANTPT@
-HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
-HAVE_ISWBLANK = @HAVE_ISWBLANK@
-HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
-HAVE_LCHOWN = @HAVE_LCHOWN@
-HAVE_LINK = @HAVE_LINK@
-HAVE_LINKAT = @HAVE_LINKAT@
-HAVE_MBRLEN = @HAVE_MBRLEN@
-HAVE_MBRTOWC = @HAVE_MBRTOWC@
-HAVE_MBSINIT = @HAVE_MBSINIT@
-HAVE_MBSLEN = @HAVE_MBSLEN@
-HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
-HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
-HAVE_MEMCHR = @HAVE_MEMCHR@
-HAVE_MEMPCPY = @HAVE_MEMPCPY@
-HAVE_MKDTEMP = @HAVE_MKDTEMP@
-HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
-HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
-HAVE_MKSTEMP = @HAVE_MKSTEMP@
-HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
-HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
-HAVE_OS_H = @HAVE_OS_H@
-HAVE_PIPE = @HAVE_PIPE@
-HAVE_PIPE2 = @HAVE_PIPE2@
-HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
-HAVE_PREAD = @HAVE_PREAD@
-HAVE_PTSNAME = @HAVE_PTSNAME@
-HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
-HAVE_PWRITE = @HAVE_PWRITE@
-HAVE_RANDOM = @HAVE_RANDOM@
-HAVE_RANDOM_H = @HAVE_RANDOM_H@
-HAVE_RANDOM_R = @HAVE_RANDOM_R@
-HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
-HAVE_READLINK = @HAVE_READLINK@
-HAVE_READLINKAT = @HAVE_READLINKAT@
-HAVE_REALPATH = @HAVE_REALPATH@
-HAVE_RPMATCH = @HAVE_RPMATCH@
-HAVE_SETENV = @HAVE_SETENV@
-HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
-HAVE_SLEEP = @HAVE_SLEEP@
-HAVE_STPCPY = @HAVE_STPCPY@
-HAVE_STPNCPY = @HAVE_STPNCPY@
-HAVE_STRCASESTR = @HAVE_STRCASESTR@
-HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
-HAVE_STRPBRK = @HAVE_STRPBRK@
-HAVE_STRSEP = @HAVE_STRSEP@
-HAVE_STRTOD = @HAVE_STRTOD@
-HAVE_STRTOLL = @HAVE_STRTOLL@
-HAVE_STRTOULL = @HAVE_STRTOULL@
-HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
-HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
-HAVE_SYMLINK = @HAVE_SYMLINK@
-HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
-HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
-HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
-HAVE_UNISTD_H = @HAVE_UNISTD_H@
-HAVE_UNLINKAT = @HAVE_UNLINKAT@
-HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
-HAVE_USLEEP = @HAVE_USLEEP@
-HAVE_WCHAR_H = @HAVE_WCHAR_H@
-HAVE_WCHAR_T = @HAVE_WCHAR_T@
-HAVE_WCPCPY = @HAVE_WCPCPY@
-HAVE_WCPNCPY = @HAVE_WCPNCPY@
-HAVE_WCRTOMB = @HAVE_WCRTOMB@
-HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
-HAVE_WCSCAT = @HAVE_WCSCAT@
-HAVE_WCSCHR = @HAVE_WCSCHR@
-HAVE_WCSCMP = @HAVE_WCSCMP@
-HAVE_WCSCOLL = @HAVE_WCSCOLL@
-HAVE_WCSCPY = @HAVE_WCSCPY@
-HAVE_WCSCSPN = @HAVE_WCSCSPN@
-HAVE_WCSDUP = @HAVE_WCSDUP@
-HAVE_WCSLEN = @HAVE_WCSLEN@
-HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
-HAVE_WCSNCAT = @HAVE_WCSNCAT@
-HAVE_WCSNCMP = @HAVE_WCSNCMP@
-HAVE_WCSNCPY = @HAVE_WCSNCPY@
-HAVE_WCSNLEN = @HAVE_WCSNLEN@
-HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
-HAVE_WCSPBRK = @HAVE_WCSPBRK@
-HAVE_WCSRCHR = @HAVE_WCSRCHR@
-HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
-HAVE_WCSSPN = @HAVE_WCSSPN@
-HAVE_WCSSTR = @HAVE_WCSSTR@
-HAVE_WCSTOK = @HAVE_WCSTOK@
-HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
-HAVE_WCSXFRM = @HAVE_WCSXFRM@
-HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
-HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
-HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
-HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
-HAVE_WINT_T = @HAVE_WINT_T@
-HAVE_WMEMCHR = @HAVE_WMEMCHR@
-HAVE_WMEMCMP = @HAVE_WMEMCMP@
-HAVE_WMEMCPY = @HAVE_WMEMCPY@
-HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
-HAVE_WMEMSET = @HAVE_WMEMSET@
-HAVE__BOOL = @HAVE__BOOL@
-HAVE__EXIT = @HAVE__EXIT@
-HELP2MAN = @HELP2MAN@
-INCLUDE_NEXT = @INCLUDE_NEXT@
-INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBHELLO_LIBDEPS = @LIBHELLO_LIBDEPS@
-LIBHELLO_LTLIBDEPS = @LIBHELLO_LTLIBDEPS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
-LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
-LOCALE_JA = @LOCALE_JA@
-LOCALE_ZH_CN = @LOCALE_ZH_CN@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
-NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
-NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
-NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
-NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
-NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
-NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
-NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
-NEXT_ERRNO_H = @NEXT_ERRNO_H@
-NEXT_GETOPT_H = @NEXT_GETOPT_H@
-NEXT_STDDEF_H = @NEXT_STDDEF_H@
-NEXT_STDLIB_H = @NEXT_STDLIB_H@
-NEXT_STRING_H = @NEXT_STRING_H@
-NEXT_UNISTD_H = @NEXT_UNISTD_H@
-NEXT_WCHAR_H = @NEXT_WCHAR_H@
-NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
-PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
-RANLIB = @RANLIB@
-REPLACE_BTOWC = @REPLACE_BTOWC@
-REPLACE_CALLOC = @REPLACE_CALLOC@
-REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
-REPLACE_CHOWN = @REPLACE_CHOWN@
-REPLACE_CLOSE = @REPLACE_CLOSE@
-REPLACE_DUP = @REPLACE_DUP@
-REPLACE_DUP2 = @REPLACE_DUP2@
-REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
-REPLACE_GETCWD = @REPLACE_GETCWD@
-REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
-REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
-REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
-REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
-REPLACE_ISATTY = @REPLACE_ISATTY@
-REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
-REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
-REPLACE_LCHOWN = @REPLACE_LCHOWN@
-REPLACE_LINK = @REPLACE_LINK@
-REPLACE_LINKAT = @REPLACE_LINKAT@
-REPLACE_LSEEK = @REPLACE_LSEEK@
-REPLACE_MALLOC = @REPLACE_MALLOC@
-REPLACE_MBRLEN = @REPLACE_MBRLEN@
-REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
-REPLACE_MBSINIT = @REPLACE_MBSINIT@
-REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
-REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
-REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
-REPLACE_MBTOWC = @REPLACE_MBTOWC@
-REPLACE_MEMCHR = @REPLACE_MEMCHR@
-REPLACE_MEMMEM = @REPLACE_MEMMEM@
-REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
-REPLACE_NULL = @REPLACE_NULL@
-REPLACE_PREAD = @REPLACE_PREAD@
-REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
-REPLACE_PUTENV = @REPLACE_PUTENV@
-REPLACE_PWRITE = @REPLACE_PWRITE@
-REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
-REPLACE_READ = @REPLACE_READ@
-REPLACE_READLINK = @REPLACE_READLINK@
-REPLACE_REALLOC = @REPLACE_REALLOC@
-REPLACE_REALPATH = @REPLACE_REALPATH@
-REPLACE_RMDIR = @REPLACE_RMDIR@
-REPLACE_SETENV = @REPLACE_SETENV@
-REPLACE_SLEEP = @REPLACE_SLEEP@
-REPLACE_STPNCPY = @REPLACE_STPNCPY@
-REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
-REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
-REPLACE_STRDUP = @REPLACE_STRDUP@
-REPLACE_STRERROR = @REPLACE_STRERROR@
-REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
-REPLACE_STRNCAT = @REPLACE_STRNCAT@
-REPLACE_STRNDUP = @REPLACE_STRNDUP@
-REPLACE_STRNLEN = @REPLACE_STRNLEN@
-REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
-REPLACE_STRSTR = @REPLACE_STRSTR@
-REPLACE_STRTOD = @REPLACE_STRTOD@
-REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
-REPLACE_SYMLINK = @REPLACE_SYMLINK@
-REPLACE_TOWLOWER = @REPLACE_TOWLOWER@
-REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
-REPLACE_UNLINK = @REPLACE_UNLINK@
-REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
-REPLACE_UNSETENV = @REPLACE_UNSETENV@
-REPLACE_USLEEP = @REPLACE_USLEEP@
-REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
-REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
-REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
-REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
-REPLACE_WCTOB = @REPLACE_WCTOB@
-REPLACE_WCTOMB = @REPLACE_WCTOMB@
-REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
-REPLACE_WRITE = @REPLACE_WRITE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STDBOOL_H = @STDBOOL_H@
-STDDEF_H = @STDDEF_H@
-STRIP = @STRIP@
-UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
-UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
-UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gl_LIBOBJS = @gl_LIBOBJS@
-gl_LTLIBOBJS = @gl_LTLIBOBJS@
-gltests_LIBOBJS = @gltests_LIBOBJS@
-gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
-gltests_WITNESS = @gltests_WITNESS@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-lispdir = @lispdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = 1.5 gnits
-SUBDIRS =
-noinst_HEADERS =
-noinst_LIBRARIES = libhello.a
-noinst_LTLIBRARIES =
-EXTRA_DIST = $(top_srcdir)/build-aux/announce-gen c-strcaseeq.h \
- close-stream.h closeout.h \
- $(top_srcdir)/build-aux/do-release-commit-and-tag errno.in.h \
- error.c error.h exitfail.h fpending.c fpending.h \
- $(top_srcdir)/build-aux/gendocs.sh getopt.c getopt.in.h \
- getopt1.c getopt_int.h $(top_srcdir)/build-aux/config.rpath \
- $(top_srcdir)/GNUmakefile $(top_srcdir)/build-aux/gnupload \
- $(top_srcdir)/build-aux/config.rpath intprops.h config.charset \
- ref-add.sin ref-del.sin $(top_srcdir)/maint.mk mbrtowc.c \
- mbsinit.c msvc-inval.c msvc-inval.h msvc-nothrow.c \
- msvc-nothrow.h quote.h quotearg.h $(top_srcdir)/README-release \
- $(top_srcdir)/build-aux/snippet/_Noreturn.h \
- $(top_srcdir)/build-aux/snippet/arg-nonnull.h \
- $(top_srcdir)/build-aux/snippet/c++defs.h \
- $(top_srcdir)/build-aux/snippet/warn-on-use.h stdbool.in.h \
- stddef.in.h stdlib.in.h streq.h strerror.c strerror-override.c \
- strerror-override.h string.in.h unistd.in.h \
- $(top_srcdir)/build-aux/useless-if-before-free \
- $(top_srcdir)/build-aux/vc-list-files verify.h wchar.in.h \
- wctype.in.h xalloc.h xalloc-oversized.h
-
-# The BUILT_SOURCES created by this Makefile snippet are not used via #include
-# statements but through direct file reference. Therefore this snippet must be
-# present in all Makefile.am that need it. This is ensured by the applicability
-# 'all' defined above.
-
-# The BUILT_SOURCES created by this Makefile snippet are not used via #include
-# statements but through direct file reference. Therefore this snippet must be
-# present in all Makefile.am that need it. This is ensured by the applicability
-# 'all' defined above.
-BUILT_SOURCES = configmake.h $(ERRNO_H) $(GETOPT_H) arg-nonnull.h \
- c++defs.h warn-on-use.h $(STDBOOL_H) $(STDDEF_H) stdlib.h \
- string.h unistd.h wchar.h wctype.h
-SUFFIXES = .sed .sin
-MOSTLYCLEANFILES = core *.stackdump errno.h errno.h-t getopt.h \
- getopt.h-t arg-nonnull.h arg-nonnull.h-t c++defs.h c++defs.h-t \
- warn-on-use.h warn-on-use.h-t stdbool.h stdbool.h-t stddef.h \
- stddef.h-t stdlib.h stdlib.h-t string.h string.h-t unistd.h \
- unistd.h-t wchar.h wchar.h-t wctype.h wctype.h-t
-MOSTLYCLEANDIRS =
-CLEANFILES = configmake.h configmake.h-t charset.alias ref-add.sed \
- ref-del.sed
-DISTCLEANFILES =
-MAINTAINERCLEANFILES =
-
-# This is for those projects which use "gettextize --intl" to put a source-code
-# copy of libintl into their package. In such projects, every Makefile.am needs
-# -I$(top_builddir)/intl, so that <libintl.h> can be found in this directory.
-# For the Makefile.ams in other directories it is the maintainer's
-# responsibility; for the one from gnulib we do it here.
-# This option has no effect when the user disables NLS (because then the intl
-# directory contains no libintl.h file) or when the project does not use
-# "gettextize --intl".
-AM_CPPFLAGS = -I$(top_builddir)/intl
-AM_CFLAGS =
-libhello_a_SOURCES = c-ctype.h c-ctype.c c-strcase.h c-strcasecmp.c \
- c-strncasecmp.c close-stream.c closeout.c exitfail.c gettext.h \
- localcharset.h localcharset.c progname.h progname.c quotearg.c \
- xmalloc.c xalloc-die.c
-libhello_a_LIBADD = $(gl_LIBOBJS)
-libhello_a_DEPENDENCIES = $(gl_LIBOBJS)
-EXTRA_libhello_a_SOURCES = error.c fpending.c getopt.c getopt1.c \
- mbrtowc.c mbsinit.c msvc-inval.c msvc-nothrow.c strerror.c \
- strerror-override.c
-charset_alias = $(DESTDIR)$(libdir)/charset.alias
-charset_tmp = $(DESTDIR)$(libdir)/charset.tmp
-
-# Because this Makefile snippet defines a variable used by other
-# gnulib Makefile snippets, it must be present in all Makefile.am that
-# need it. This is ensured by the applicability 'all' defined above.
-_NORETURN_H = $(top_srcdir)/build-aux/snippet/_Noreturn.h
-ARG_NONNULL_H = arg-nonnull.h
-CXXDEFS_H = c++defs.h
-WARN_ON_USE_H = warn-on-use.h
-all: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .sed .sin .c .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits lib/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnits lib/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libhello.a: $(libhello_a_OBJECTS) $(libhello_a_DEPENDENCIES) $(EXTRA_libhello_a_DEPENDENCIES)
- -rm -f libhello.a
- $(libhello_a_AR) libhello.a $(libhello_a_OBJECTS) $(libhello_a_LIBADD)
- $(RANLIB) libhello.a
-
-clean-noinstLTLIBRARIES:
- -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
- @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
- dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
- test "$$dir" != "$$p" || dir=.; \
- echo "rm -f \"$${dir}/so_locations\""; \
- rm -f "$${dir}/so_locations"; \
- done
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c-ctype.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c-strcasecmp.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c-strncasecmp.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/close-stream.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/closeout.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exitfail.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fpending.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/localcharset.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mbrtowc.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mbsinit.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/msvc-inval.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/msvc-nothrow.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/progname.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/quotearg.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strerror-override.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strerror.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xalloc-die.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmalloc.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @fail= failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) check-recursive
-all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(HEADERS) all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
- -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-recursive
-
-clean-am: clean-generic clean-noinstLIBRARIES clean-noinstLTLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-recursive
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-local distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am: install-exec-local
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-local
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
- ctags-recursive install install-am install-strip \
- tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am all-local check check-am clean clean-generic \
- clean-noinstLIBRARIES clean-noinstLTLIBRARIES ctags \
- ctags-recursive distclean distclean-compile distclean-generic \
- distclean-local distclean-tags distdir dvi dvi-am html html-am \
- info info-am install install-am install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-exec-local install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-local pdf pdf-am ps ps-am tags \
- tags-recursive uninstall uninstall-am uninstall-local
-
-
-# Listed in the same order as the GNU makefile conventions, and
-# provided by autoconf 2.59c+.
-# The Automake-defined pkg* macros are appended, in the order
-# listed in the Automake 1.10a+ documentation.
-configmake.h: Makefile
- $(AM_V_GEN)rm -f $@-t && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- echo '#define PREFIX "$(prefix)"'; \
- echo '#define EXEC_PREFIX "$(exec_prefix)"'; \
- echo '#define BINDIR "$(bindir)"'; \
- echo '#define SBINDIR "$(sbindir)"'; \
- echo '#define LIBEXECDIR "$(libexecdir)"'; \
- echo '#define DATAROOTDIR "$(datarootdir)"'; \
- echo '#define DATADIR "$(datadir)"'; \
- echo '#define SYSCONFDIR "$(sysconfdir)"'; \
- echo '#define SHAREDSTATEDIR "$(sharedstatedir)"'; \
- echo '#define LOCALSTATEDIR "$(localstatedir)"'; \
- echo '#define INCLUDEDIR "$(includedir)"'; \
- echo '#define OLDINCLUDEDIR "$(oldincludedir)"'; \
- echo '#define DOCDIR "$(docdir)"'; \
- echo '#define INFODIR "$(infodir)"'; \
- echo '#define HTMLDIR "$(htmldir)"'; \
- echo '#define DVIDIR "$(dvidir)"'; \
- echo '#define PDFDIR "$(pdfdir)"'; \
- echo '#define PSDIR "$(psdir)"'; \
- echo '#define LIBDIR "$(libdir)"'; \
- echo '#define LISPDIR "$(lispdir)"'; \
- echo '#define LOCALEDIR "$(localedir)"'; \
- echo '#define MANDIR "$(mandir)"'; \
- echo '#define MANEXT "$(manext)"'; \
- echo '#define PKGDATADIR "$(pkgdatadir)"'; \
- echo '#define PKGINCLUDEDIR "$(pkgincludedir)"'; \
- echo '#define PKGLIBDIR "$(pkglibdir)"'; \
- echo '#define PKGLIBEXECDIR "$(pkglibexecdir)"'; \
- } | sed '/""/d' > $@-t && \
- mv -f $@-t $@
-
-# We need the following in order to create <errno.h> when the system
-# doesn't have one that is POSIX compliant.
-@GL_GENERATE_ERRNO_H_TRUE@errno.h: errno.in.h $(top_builddir)/config.status
-@GL_GENERATE_ERRNO_H_TRUE@ $(AM_V_GEN)rm -f $@-t $@ && \
-@GL_GENERATE_ERRNO_H_TRUE@ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
-@GL_GENERATE_ERRNO_H_TRUE@ sed -e 's|@''GUARD_PREFIX''@|GL|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''NEXT_ERRNO_H''@|$(NEXT_ERRNO_H)|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''EMULTIHOP_HIDDEN''@|$(EMULTIHOP_HIDDEN)|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''EMULTIHOP_VALUE''@|$(EMULTIHOP_VALUE)|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''ENOLINK_HIDDEN''@|$(ENOLINK_HIDDEN)|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''ENOLINK_VALUE''@|$(ENOLINK_VALUE)|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''EOVERFLOW_HIDDEN''@|$(EOVERFLOW_HIDDEN)|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ -e 's|@''EOVERFLOW_VALUE''@|$(EOVERFLOW_VALUE)|g' \
-@GL_GENERATE_ERRNO_H_TRUE@ < $(srcdir)/errno.in.h; \
-@GL_GENERATE_ERRNO_H_TRUE@ } > $@-t && \
-@GL_GENERATE_ERRNO_H_TRUE@ mv $@-t $@
-@GL_GENERATE_ERRNO_H_FALSE@errno.h: $(top_builddir)/config.status
-@GL_GENERATE_ERRNO_H_FALSE@ rm -f $@
-
-# We need the following in order to create <getopt.h> when the system
-# doesn't have one that works with the given compiler.
-getopt.h: getopt.in.h $(top_builddir)/config.status $(ARG_NONNULL_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''HAVE_GETOPT_H''@|$(HAVE_GETOPT_H)|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_GETOPT_H''@|$(NEXT_GETOPT_H)|g' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- < $(srcdir)/getopt.in.h; \
- } > $@-t && \
- mv -f $@-t $@
-
-distclean-local: clean-GNUmakefile
-clean-GNUmakefile:
- test x'$(VPATH)' != x && rm -f $(top_builddir)/GNUmakefile || :
-
-# We need the following in order to install a simple file in $(libdir)
-# which is shared with other installed packages. We use a list of referencing
-# packages so that "make uninstall" will remove the file if and only if it
-# is not used by another installed package.
-# On systems with glibc-2.1 or newer, the file is redundant, therefore we
-# avoid installing it.
-
-all-local: charset.alias ref-add.sed ref-del.sed
-install-exec-local: install-exec-localcharset
-install-exec-localcharset: all-local
- if test $(GLIBC21) = no; then \
- case '$(host_os)' in \
- darwin[56]*) \
- need_charset_alias=true ;; \
- darwin* | cygwin* | mingw* | pw32* | cegcc*) \
- need_charset_alias=false ;; \
- *) \
- need_charset_alias=true ;; \
- esac ; \
- else \
- need_charset_alias=false ; \
- fi ; \
- if $$need_charset_alias; then \
- $(mkinstalldirs) $(DESTDIR)$(libdir) ; \
- fi ; \
- if test -f $(charset_alias); then \
- sed -f ref-add.sed $(charset_alias) > $(charset_tmp) ; \
- $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \
- rm -f $(charset_tmp) ; \
- else \
- if $$need_charset_alias; then \
- sed -f ref-add.sed charset.alias > $(charset_tmp) ; \
- $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \
- rm -f $(charset_tmp) ; \
- fi ; \
- fi
-
-uninstall-local: uninstall-localcharset
-uninstall-localcharset: all-local
- if test -f $(charset_alias); then \
- sed -f ref-del.sed $(charset_alias) > $(charset_tmp); \
- if grep '^# Packages using this file: $$' $(charset_tmp) \
- > /dev/null; then \
- rm -f $(charset_alias); \
- else \
- $(INSTALL_DATA) $(charset_tmp) $(charset_alias); \
- fi; \
- rm -f $(charset_tmp); \
- fi
-
-charset.alias: config.charset
- $(AM_V_GEN)rm -f t-$@ $@ && \
- $(SHELL) $(srcdir)/config.charset '$(host)' > t-$@ && \
- mv t-$@ $@
-.sin.sed:
- $(AM_V_GEN)rm -f t-$@ $@ && \
- sed -e '/^#/d' -e 's/@''PACKAGE''@/$(PACKAGE)/g' $< > t-$@ && \
- mv t-$@ $@
-# The arg-nonnull.h that gets inserted into generated .h files is the same as
-# build-aux/snippet/arg-nonnull.h, except that it has the copyright header cut
-# off.
-arg-nonnull.h: $(top_srcdir)/build-aux/snippet/arg-nonnull.h
- $(AM_V_GEN)rm -f $@-t $@ && \
- sed -n -e '/GL_ARG_NONNULL/,$$p' \
- < $(top_srcdir)/build-aux/snippet/arg-nonnull.h \
- > $@-t && \
- mv $@-t $@
-# The c++defs.h that gets inserted into generated .h files is the same as
-# build-aux/snippet/c++defs.h, except that it has the copyright header cut off.
-c++defs.h: $(top_srcdir)/build-aux/snippet/c++defs.h
- $(AM_V_GEN)rm -f $@-t $@ && \
- sed -n -e '/_GL_CXXDEFS/,$$p' \
- < $(top_srcdir)/build-aux/snippet/c++defs.h \
- > $@-t && \
- mv $@-t $@
-# The warn-on-use.h that gets inserted into generated .h files is the same as
-# build-aux/snippet/warn-on-use.h, except that it has the copyright header cut
-# off.
-warn-on-use.h: $(top_srcdir)/build-aux/snippet/warn-on-use.h
- $(AM_V_GEN)rm -f $@-t $@ && \
- sed -n -e '/^.ifndef/,$$p' \
- < $(top_srcdir)/build-aux/snippet/warn-on-use.h \
- > $@-t && \
- mv $@-t $@
-
-# We need the following in order to create <stdbool.h> when the system
-# doesn't have one that works.
-@GL_GENERATE_STDBOOL_H_TRUE@stdbool.h: stdbool.in.h $(top_builddir)/config.status
-@GL_GENERATE_STDBOOL_H_TRUE@ $(AM_V_GEN)rm -f $@-t $@ && \
-@GL_GENERATE_STDBOOL_H_TRUE@ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
-@GL_GENERATE_STDBOOL_H_TRUE@ sed -e 's/@''HAVE__BOOL''@/$(HAVE__BOOL)/g' < $(srcdir)/stdbool.in.h; \
-@GL_GENERATE_STDBOOL_H_TRUE@ } > $@-t && \
-@GL_GENERATE_STDBOOL_H_TRUE@ mv $@-t $@
-@GL_GENERATE_STDBOOL_H_FALSE@stdbool.h: $(top_builddir)/config.status
-@GL_GENERATE_STDBOOL_H_FALSE@ rm -f $@
-
-# We need the following in order to create <stddef.h> when the system
-# doesn't have one that works with the given compiler.
-@GL_GENERATE_STDDEF_H_TRUE@stddef.h: stddef.in.h $(top_builddir)/config.status
-@GL_GENERATE_STDDEF_H_TRUE@ $(AM_V_GEN)rm -f $@-t $@ && \
-@GL_GENERATE_STDDEF_H_TRUE@ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
-@GL_GENERATE_STDDEF_H_TRUE@ sed -e 's|@''GUARD_PREFIX''@|GL|g' \
-@GL_GENERATE_STDDEF_H_TRUE@ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-@GL_GENERATE_STDDEF_H_TRUE@ -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
-@GL_GENERATE_STDDEF_H_TRUE@ -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
-@GL_GENERATE_STDDEF_H_TRUE@ -e 's|@''NEXT_STDDEF_H''@|$(NEXT_STDDEF_H)|g' \
-@GL_GENERATE_STDDEF_H_TRUE@ -e 's|@''HAVE_WCHAR_T''@|$(HAVE_WCHAR_T)|g' \
-@GL_GENERATE_STDDEF_H_TRUE@ -e 's|@''REPLACE_NULL''@|$(REPLACE_NULL)|g' \
-@GL_GENERATE_STDDEF_H_TRUE@ < $(srcdir)/stddef.in.h; \
-@GL_GENERATE_STDDEF_H_TRUE@ } > $@-t && \
-@GL_GENERATE_STDDEF_H_TRUE@ mv $@-t $@
-@GL_GENERATE_STDDEF_H_FALSE@stddef.h: $(top_builddir)/config.status
-@GL_GENERATE_STDDEF_H_FALSE@ rm -f $@
-
-# We need the following in order to create <stdlib.h> when the system
-# doesn't have one that works with the given compiler.
-stdlib.h: stdlib.in.h $(top_builddir)/config.status $(CXXDEFS_H) \
- $(_NORETURN_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_STDLIB_H''@|$(NEXT_STDLIB_H)|g' \
- -e 's/@''GNULIB__EXIT''@/$(GNULIB__EXIT)/g' \
- -e 's/@''GNULIB_ATOLL''@/$(GNULIB_ATOLL)/g' \
- -e 's/@''GNULIB_CALLOC_POSIX''@/$(GNULIB_CALLOC_POSIX)/g' \
- -e 's/@''GNULIB_CANONICALIZE_FILE_NAME''@/$(GNULIB_CANONICALIZE_FILE_NAME)/g' \
- -e 's/@''GNULIB_GETLOADAVG''@/$(GNULIB_GETLOADAVG)/g' \
- -e 's/@''GNULIB_GETSUBOPT''@/$(GNULIB_GETSUBOPT)/g' \
- -e 's/@''GNULIB_GRANTPT''@/$(GNULIB_GRANTPT)/g' \
- -e 's/@''GNULIB_MALLOC_POSIX''@/$(GNULIB_MALLOC_POSIX)/g' \
- -e 's/@''GNULIB_MBTOWC''@/$(GNULIB_MBTOWC)/g' \
- -e 's/@''GNULIB_MKDTEMP''@/$(GNULIB_MKDTEMP)/g' \
- -e 's/@''GNULIB_MKOSTEMP''@/$(GNULIB_MKOSTEMP)/g' \
- -e 's/@''GNULIB_MKOSTEMPS''@/$(GNULIB_MKOSTEMPS)/g' \
- -e 's/@''GNULIB_MKSTEMP''@/$(GNULIB_MKSTEMP)/g' \
- -e 's/@''GNULIB_MKSTEMPS''@/$(GNULIB_MKSTEMPS)/g' \
- -e 's/@''GNULIB_POSIX_OPENPT''@/$(GNULIB_POSIX_OPENPT)/g' \
- -e 's/@''GNULIB_PTSNAME''@/$(GNULIB_PTSNAME)/g' \
- -e 's/@''GNULIB_PTSNAME_R''@/$(GNULIB_PTSNAME_R)/g' \
- -e 's/@''GNULIB_PUTENV''@/$(GNULIB_PUTENV)/g' \
- -e 's/@''GNULIB_RANDOM''@/$(GNULIB_RANDOM)/g' \
- -e 's/@''GNULIB_RANDOM_R''@/$(GNULIB_RANDOM_R)/g' \
- -e 's/@''GNULIB_REALLOC_POSIX''@/$(GNULIB_REALLOC_POSIX)/g' \
- -e 's/@''GNULIB_REALPATH''@/$(GNULIB_REALPATH)/g' \
- -e 's/@''GNULIB_RPMATCH''@/$(GNULIB_RPMATCH)/g' \
- -e 's/@''GNULIB_SETENV''@/$(GNULIB_SETENV)/g' \
- -e 's/@''GNULIB_STRTOD''@/$(GNULIB_STRTOD)/g' \
- -e 's/@''GNULIB_STRTOLL''@/$(GNULIB_STRTOLL)/g' \
- -e 's/@''GNULIB_STRTOULL''@/$(GNULIB_STRTOULL)/g' \
- -e 's/@''GNULIB_SYSTEM_POSIX''@/$(GNULIB_SYSTEM_POSIX)/g' \
- -e 's/@''GNULIB_UNLOCKPT''@/$(GNULIB_UNLOCKPT)/g' \
- -e 's/@''GNULIB_UNSETENV''@/$(GNULIB_UNSETENV)/g' \
- -e 's/@''GNULIB_WCTOMB''@/$(GNULIB_WCTOMB)/g' \
- < $(srcdir)/stdlib.in.h | \
- sed -e 's|@''HAVE__EXIT''@|$(HAVE__EXIT)|g' \
- -e 's|@''HAVE_ATOLL''@|$(HAVE_ATOLL)|g' \
- -e 's|@''HAVE_CANONICALIZE_FILE_NAME''@|$(HAVE_CANONICALIZE_FILE_NAME)|g' \
- -e 's|@''HAVE_DECL_GETLOADAVG''@|$(HAVE_DECL_GETLOADAVG)|g' \
- -e 's|@''HAVE_GETSUBOPT''@|$(HAVE_GETSUBOPT)|g' \
- -e 's|@''HAVE_GRANTPT''@|$(HAVE_GRANTPT)|g' \
- -e 's|@''HAVE_MKDTEMP''@|$(HAVE_MKDTEMP)|g' \
- -e 's|@''HAVE_MKOSTEMP''@|$(HAVE_MKOSTEMP)|g' \
- -e 's|@''HAVE_MKOSTEMPS''@|$(HAVE_MKOSTEMPS)|g' \
- -e 's|@''HAVE_MKSTEMP''@|$(HAVE_MKSTEMP)|g' \
- -e 's|@''HAVE_MKSTEMPS''@|$(HAVE_MKSTEMPS)|g' \
- -e 's|@''HAVE_POSIX_OPENPT''@|$(HAVE_POSIX_OPENPT)|g' \
- -e 's|@''HAVE_PTSNAME''@|$(HAVE_PTSNAME)|g' \
- -e 's|@''HAVE_PTSNAME_R''@|$(HAVE_PTSNAME_R)|g' \
- -e 's|@''HAVE_RANDOM''@|$(HAVE_RANDOM)|g' \
- -e 's|@''HAVE_RANDOM_H''@|$(HAVE_RANDOM_H)|g' \
- -e 's|@''HAVE_RANDOM_R''@|$(HAVE_RANDOM_R)|g' \
- -e 's|@''HAVE_REALPATH''@|$(HAVE_REALPATH)|g' \
- -e 's|@''HAVE_RPMATCH''@|$(HAVE_RPMATCH)|g' \
- -e 's|@''HAVE_DECL_SETENV''@|$(HAVE_DECL_SETENV)|g' \
- -e 's|@''HAVE_STRTOD''@|$(HAVE_STRTOD)|g' \
- -e 's|@''HAVE_STRTOLL''@|$(HAVE_STRTOLL)|g' \
- -e 's|@''HAVE_STRTOULL''@|$(HAVE_STRTOULL)|g' \
- -e 's|@''HAVE_STRUCT_RANDOM_DATA''@|$(HAVE_STRUCT_RANDOM_DATA)|g' \
- -e 's|@''HAVE_SYS_LOADAVG_H''@|$(HAVE_SYS_LOADAVG_H)|g' \
- -e 's|@''HAVE_UNLOCKPT''@|$(HAVE_UNLOCKPT)|g' \
- -e 's|@''HAVE_DECL_UNSETENV''@|$(HAVE_DECL_UNSETENV)|g' \
- -e 's|@''REPLACE_CALLOC''@|$(REPLACE_CALLOC)|g' \
- -e 's|@''REPLACE_CANONICALIZE_FILE_NAME''@|$(REPLACE_CANONICALIZE_FILE_NAME)|g' \
- -e 's|@''REPLACE_MALLOC''@|$(REPLACE_MALLOC)|g' \
- -e 's|@''REPLACE_MBTOWC''@|$(REPLACE_MBTOWC)|g' \
- -e 's|@''REPLACE_MKSTEMP''@|$(REPLACE_MKSTEMP)|g' \
- -e 's|@''REPLACE_PTSNAME_R''@|$(REPLACE_PTSNAME_R)|g' \
- -e 's|@''REPLACE_PUTENV''@|$(REPLACE_PUTENV)|g' \
- -e 's|@''REPLACE_RANDOM_R''@|$(REPLACE_RANDOM_R)|g' \
- -e 's|@''REPLACE_REALLOC''@|$(REPLACE_REALLOC)|g' \
- -e 's|@''REPLACE_REALPATH''@|$(REPLACE_REALPATH)|g' \
- -e 's|@''REPLACE_SETENV''@|$(REPLACE_SETENV)|g' \
- -e 's|@''REPLACE_STRTOD''@|$(REPLACE_STRTOD)|g' \
- -e 's|@''REPLACE_UNSETENV''@|$(REPLACE_UNSETENV)|g' \
- -e 's|@''REPLACE_WCTOMB''@|$(REPLACE_WCTOMB)|g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _Noreturn/r $(_NORETURN_H)' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \
- } > $@-t && \
- mv $@-t $@
-
-# We need the following in order to create <string.h> when the system
-# doesn't have one that works with the given compiler.
-string.h: string.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_STRING_H''@|$(NEXT_STRING_H)|g' \
- -e 's/@''GNULIB_FFSL''@/$(GNULIB_FFSL)/g' \
- -e 's/@''GNULIB_FFSLL''@/$(GNULIB_FFSLL)/g' \
- -e 's/@''GNULIB_MBSLEN''@/$(GNULIB_MBSLEN)/g' \
- -e 's/@''GNULIB_MBSNLEN''@/$(GNULIB_MBSNLEN)/g' \
- -e 's/@''GNULIB_MBSCHR''@/$(GNULIB_MBSCHR)/g' \
- -e 's/@''GNULIB_MBSRCHR''@/$(GNULIB_MBSRCHR)/g' \
- -e 's/@''GNULIB_MBSSTR''@/$(GNULIB_MBSSTR)/g' \
- -e 's/@''GNULIB_MBSCASECMP''@/$(GNULIB_MBSCASECMP)/g' \
- -e 's/@''GNULIB_MBSNCASECMP''@/$(GNULIB_MBSNCASECMP)/g' \
- -e 's/@''GNULIB_MBSPCASECMP''@/$(GNULIB_MBSPCASECMP)/g' \
- -e 's/@''GNULIB_MBSCASESTR''@/$(GNULIB_MBSCASESTR)/g' \
- -e 's/@''GNULIB_MBSCSPN''@/$(GNULIB_MBSCSPN)/g' \
- -e 's/@''GNULIB_MBSPBRK''@/$(GNULIB_MBSPBRK)/g' \
- -e 's/@''GNULIB_MBSSPN''@/$(GNULIB_MBSSPN)/g' \
- -e 's/@''GNULIB_MBSSEP''@/$(GNULIB_MBSSEP)/g' \
- -e 's/@''GNULIB_MBSTOK_R''@/$(GNULIB_MBSTOK_R)/g' \
- -e 's/@''GNULIB_MEMCHR''@/$(GNULIB_MEMCHR)/g' \
- -e 's/@''GNULIB_MEMMEM''@/$(GNULIB_MEMMEM)/g' \
- -e 's/@''GNULIB_MEMPCPY''@/$(GNULIB_MEMPCPY)/g' \
- -e 's/@''GNULIB_MEMRCHR''@/$(GNULIB_MEMRCHR)/g' \
- -e 's/@''GNULIB_RAWMEMCHR''@/$(GNULIB_RAWMEMCHR)/g' \
- -e 's/@''GNULIB_STPCPY''@/$(GNULIB_STPCPY)/g' \
- -e 's/@''GNULIB_STPNCPY''@/$(GNULIB_STPNCPY)/g' \
- -e 's/@''GNULIB_STRCHRNUL''@/$(GNULIB_STRCHRNUL)/g' \
- -e 's/@''GNULIB_STRDUP''@/$(GNULIB_STRDUP)/g' \
- -e 's/@''GNULIB_STRNCAT''@/$(GNULIB_STRNCAT)/g' \
- -e 's/@''GNULIB_STRNDUP''@/$(GNULIB_STRNDUP)/g' \
- -e 's/@''GNULIB_STRNLEN''@/$(GNULIB_STRNLEN)/g' \
- -e 's/@''GNULIB_STRPBRK''@/$(GNULIB_STRPBRK)/g' \
- -e 's/@''GNULIB_STRSEP''@/$(GNULIB_STRSEP)/g' \
- -e 's/@''GNULIB_STRSTR''@/$(GNULIB_STRSTR)/g' \
- -e 's/@''GNULIB_STRCASESTR''@/$(GNULIB_STRCASESTR)/g' \
- -e 's/@''GNULIB_STRTOK_R''@/$(GNULIB_STRTOK_R)/g' \
- -e 's/@''GNULIB_STRERROR''@/$(GNULIB_STRERROR)/g' \
- -e 's/@''GNULIB_STRERROR_R''@/$(GNULIB_STRERROR_R)/g' \
- -e 's/@''GNULIB_STRSIGNAL''@/$(GNULIB_STRSIGNAL)/g' \
- -e 's/@''GNULIB_STRVERSCMP''@/$(GNULIB_STRVERSCMP)/g' \
- < $(srcdir)/string.in.h | \
- sed -e 's|@''HAVE_FFSL''@|$(HAVE_FFSL)|g' \
- -e 's|@''HAVE_FFSLL''@|$(HAVE_FFSLL)|g' \
- -e 's|@''HAVE_MBSLEN''@|$(HAVE_MBSLEN)|g' \
- -e 's|@''HAVE_MEMCHR''@|$(HAVE_MEMCHR)|g' \
- -e 's|@''HAVE_DECL_MEMMEM''@|$(HAVE_DECL_MEMMEM)|g' \
- -e 's|@''HAVE_MEMPCPY''@|$(HAVE_MEMPCPY)|g' \
- -e 's|@''HAVE_DECL_MEMRCHR''@|$(HAVE_DECL_MEMRCHR)|g' \
- -e 's|@''HAVE_RAWMEMCHR''@|$(HAVE_RAWMEMCHR)|g' \
- -e 's|@''HAVE_STPCPY''@|$(HAVE_STPCPY)|g' \
- -e 's|@''HAVE_STPNCPY''@|$(HAVE_STPNCPY)|g' \
- -e 's|@''HAVE_STRCHRNUL''@|$(HAVE_STRCHRNUL)|g' \
- -e 's|@''HAVE_DECL_STRDUP''@|$(HAVE_DECL_STRDUP)|g' \
- -e 's|@''HAVE_DECL_STRNDUP''@|$(HAVE_DECL_STRNDUP)|g' \
- -e 's|@''HAVE_DECL_STRNLEN''@|$(HAVE_DECL_STRNLEN)|g' \
- -e 's|@''HAVE_STRPBRK''@|$(HAVE_STRPBRK)|g' \
- -e 's|@''HAVE_STRSEP''@|$(HAVE_STRSEP)|g' \
- -e 's|@''HAVE_STRCASESTR''@|$(HAVE_STRCASESTR)|g' \
- -e 's|@''HAVE_DECL_STRTOK_R''@|$(HAVE_DECL_STRTOK_R)|g' \
- -e 's|@''HAVE_DECL_STRERROR_R''@|$(HAVE_DECL_STRERROR_R)|g' \
- -e 's|@''HAVE_DECL_STRSIGNAL''@|$(HAVE_DECL_STRSIGNAL)|g' \
- -e 's|@''HAVE_STRVERSCMP''@|$(HAVE_STRVERSCMP)|g' \
- -e 's|@''REPLACE_STPNCPY''@|$(REPLACE_STPNCPY)|g' \
- -e 's|@''REPLACE_MEMCHR''@|$(REPLACE_MEMCHR)|g' \
- -e 's|@''REPLACE_MEMMEM''@|$(REPLACE_MEMMEM)|g' \
- -e 's|@''REPLACE_STRCASESTR''@|$(REPLACE_STRCASESTR)|g' \
- -e 's|@''REPLACE_STRCHRNUL''@|$(REPLACE_STRCHRNUL)|g' \
- -e 's|@''REPLACE_STRDUP''@|$(REPLACE_STRDUP)|g' \
- -e 's|@''REPLACE_STRSTR''@|$(REPLACE_STRSTR)|g' \
- -e 's|@''REPLACE_STRERROR''@|$(REPLACE_STRERROR)|g' \
- -e 's|@''REPLACE_STRERROR_R''@|$(REPLACE_STRERROR_R)|g' \
- -e 's|@''REPLACE_STRNCAT''@|$(REPLACE_STRNCAT)|g' \
- -e 's|@''REPLACE_STRNDUP''@|$(REPLACE_STRNDUP)|g' \
- -e 's|@''REPLACE_STRNLEN''@|$(REPLACE_STRNLEN)|g' \
- -e 's|@''REPLACE_STRSIGNAL''@|$(REPLACE_STRSIGNAL)|g' \
- -e 's|@''REPLACE_STRTOK_R''@|$(REPLACE_STRTOK_R)|g' \
- -e 's|@''UNDEFINE_STRTOK_R''@|$(UNDEFINE_STRTOK_R)|g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \
- < $(srcdir)/string.in.h; \
- } > $@-t && \
- mv $@-t $@
-
-# We need the following in order to create an empty placeholder for
-# <unistd.h> when the system doesn't have one.
-unistd.h: unistd.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''HAVE_UNISTD_H''@|$(HAVE_UNISTD_H)|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_UNISTD_H''@|$(NEXT_UNISTD_H)|g' \
- -e 's/@''GNULIB_CHDIR''@/$(GNULIB_CHDIR)/g' \
- -e 's/@''GNULIB_CHOWN''@/$(GNULIB_CHOWN)/g' \
- -e 's/@''GNULIB_CLOSE''@/$(GNULIB_CLOSE)/g' \
- -e 's/@''GNULIB_DUP''@/$(GNULIB_DUP)/g' \
- -e 's/@''GNULIB_DUP2''@/$(GNULIB_DUP2)/g' \
- -e 's/@''GNULIB_DUP3''@/$(GNULIB_DUP3)/g' \
- -e 's/@''GNULIB_ENVIRON''@/$(GNULIB_ENVIRON)/g' \
- -e 's/@''GNULIB_EUIDACCESS''@/$(GNULIB_EUIDACCESS)/g' \
- -e 's/@''GNULIB_FACCESSAT''@/$(GNULIB_FACCESSAT)/g' \
- -e 's/@''GNULIB_FCHDIR''@/$(GNULIB_FCHDIR)/g' \
- -e 's/@''GNULIB_FCHOWNAT''@/$(GNULIB_FCHOWNAT)/g' \
- -e 's/@''GNULIB_FDATASYNC''@/$(GNULIB_FDATASYNC)/g' \
- -e 's/@''GNULIB_FSYNC''@/$(GNULIB_FSYNC)/g' \
- -e 's/@''GNULIB_FTRUNCATE''@/$(GNULIB_FTRUNCATE)/g' \
- -e 's/@''GNULIB_GETCWD''@/$(GNULIB_GETCWD)/g' \
- -e 's/@''GNULIB_GETDOMAINNAME''@/$(GNULIB_GETDOMAINNAME)/g' \
- -e 's/@''GNULIB_GETDTABLESIZE''@/$(GNULIB_GETDTABLESIZE)/g' \
- -e 's/@''GNULIB_GETGROUPS''@/$(GNULIB_GETGROUPS)/g' \
- -e 's/@''GNULIB_GETHOSTNAME''@/$(GNULIB_GETHOSTNAME)/g' \
- -e 's/@''GNULIB_GETLOGIN''@/$(GNULIB_GETLOGIN)/g' \
- -e 's/@''GNULIB_GETLOGIN_R''@/$(GNULIB_GETLOGIN_R)/g' \
- -e 's/@''GNULIB_GETPAGESIZE''@/$(GNULIB_GETPAGESIZE)/g' \
- -e 's/@''GNULIB_GETUSERSHELL''@/$(GNULIB_GETUSERSHELL)/g' \
- -e 's/@''GNULIB_GROUP_MEMBER''@/$(GNULIB_GROUP_MEMBER)/g' \
- -e 's/@''GNULIB_ISATTY''@/$(GNULIB_ISATTY)/g' \
- -e 's/@''GNULIB_LCHOWN''@/$(GNULIB_LCHOWN)/g' \
- -e 's/@''GNULIB_LINK''@/$(GNULIB_LINK)/g' \
- -e 's/@''GNULIB_LINKAT''@/$(GNULIB_LINKAT)/g' \
- -e 's/@''GNULIB_LSEEK''@/$(GNULIB_LSEEK)/g' \
- -e 's/@''GNULIB_PIPE''@/$(GNULIB_PIPE)/g' \
- -e 's/@''GNULIB_PIPE2''@/$(GNULIB_PIPE2)/g' \
- -e 's/@''GNULIB_PREAD''@/$(GNULIB_PREAD)/g' \
- -e 's/@''GNULIB_PWRITE''@/$(GNULIB_PWRITE)/g' \
- -e 's/@''GNULIB_READ''@/$(GNULIB_READ)/g' \
- -e 's/@''GNULIB_READLINK''@/$(GNULIB_READLINK)/g' \
- -e 's/@''GNULIB_READLINKAT''@/$(GNULIB_READLINKAT)/g' \
- -e 's/@''GNULIB_RMDIR''@/$(GNULIB_RMDIR)/g' \
- -e 's/@''GNULIB_SETHOSTNAME''@/$(GNULIB_SETHOSTNAME)/g' \
- -e 's/@''GNULIB_SLEEP''@/$(GNULIB_SLEEP)/g' \
- -e 's/@''GNULIB_SYMLINK''@/$(GNULIB_SYMLINK)/g' \
- -e 's/@''GNULIB_SYMLINKAT''@/$(GNULIB_SYMLINKAT)/g' \
- -e 's/@''GNULIB_TTYNAME_R''@/$(GNULIB_TTYNAME_R)/g' \
- -e 's/@''GNULIB_UNISTD_H_GETOPT''@/0$(GNULIB_GL_UNISTD_H_GETOPT)/g' \
- -e 's/@''GNULIB_UNISTD_H_NONBLOCKING''@/$(GNULIB_UNISTD_H_NONBLOCKING)/g' \
- -e 's/@''GNULIB_UNISTD_H_SIGPIPE''@/$(GNULIB_UNISTD_H_SIGPIPE)/g' \
- -e 's/@''GNULIB_UNLINK''@/$(GNULIB_UNLINK)/g' \
- -e 's/@''GNULIB_UNLINKAT''@/$(GNULIB_UNLINKAT)/g' \
- -e 's/@''GNULIB_USLEEP''@/$(GNULIB_USLEEP)/g' \
- -e 's/@''GNULIB_WRITE''@/$(GNULIB_WRITE)/g' \
- < $(srcdir)/unistd.in.h | \
- sed -e 's|@''HAVE_CHOWN''@|$(HAVE_CHOWN)|g' \
- -e 's|@''HAVE_DUP2''@|$(HAVE_DUP2)|g' \
- -e 's|@''HAVE_DUP3''@|$(HAVE_DUP3)|g' \
- -e 's|@''HAVE_EUIDACCESS''@|$(HAVE_EUIDACCESS)|g' \
- -e 's|@''HAVE_FACCESSAT''@|$(HAVE_FACCESSAT)|g' \
- -e 's|@''HAVE_FCHDIR''@|$(HAVE_FCHDIR)|g' \
- -e 's|@''HAVE_FCHOWNAT''@|$(HAVE_FCHOWNAT)|g' \
- -e 's|@''HAVE_FDATASYNC''@|$(HAVE_FDATASYNC)|g' \
- -e 's|@''HAVE_FSYNC''@|$(HAVE_FSYNC)|g' \
- -e 's|@''HAVE_FTRUNCATE''@|$(HAVE_FTRUNCATE)|g' \
- -e 's|@''HAVE_GETDTABLESIZE''@|$(HAVE_GETDTABLESIZE)|g' \
- -e 's|@''HAVE_GETGROUPS''@|$(HAVE_GETGROUPS)|g' \
- -e 's|@''HAVE_GETHOSTNAME''@|$(HAVE_GETHOSTNAME)|g' \
- -e 's|@''HAVE_GETLOGIN''@|$(HAVE_GETLOGIN)|g' \
- -e 's|@''HAVE_GETPAGESIZE''@|$(HAVE_GETPAGESIZE)|g' \
- -e 's|@''HAVE_GROUP_MEMBER''@|$(HAVE_GROUP_MEMBER)|g' \
- -e 's|@''HAVE_LCHOWN''@|$(HAVE_LCHOWN)|g' \
- -e 's|@''HAVE_LINK''@|$(HAVE_LINK)|g' \
- -e 's|@''HAVE_LINKAT''@|$(HAVE_LINKAT)|g' \
- -e 's|@''HAVE_PIPE''@|$(HAVE_PIPE)|g' \
- -e 's|@''HAVE_PIPE2''@|$(HAVE_PIPE2)|g' \
- -e 's|@''HAVE_PREAD''@|$(HAVE_PREAD)|g' \
- -e 's|@''HAVE_PWRITE''@|$(HAVE_PWRITE)|g' \
- -e 's|@''HAVE_READLINK''@|$(HAVE_READLINK)|g' \
- -e 's|@''HAVE_READLINKAT''@|$(HAVE_READLINKAT)|g' \
- -e 's|@''HAVE_SETHOSTNAME''@|$(HAVE_SETHOSTNAME)|g' \
- -e 's|@''HAVE_SLEEP''@|$(HAVE_SLEEP)|g' \
- -e 's|@''HAVE_SYMLINK''@|$(HAVE_SYMLINK)|g' \
- -e 's|@''HAVE_SYMLINKAT''@|$(HAVE_SYMLINKAT)|g' \
- -e 's|@''HAVE_UNLINKAT''@|$(HAVE_UNLINKAT)|g' \
- -e 's|@''HAVE_USLEEP''@|$(HAVE_USLEEP)|g' \
- -e 's|@''HAVE_DECL_ENVIRON''@|$(HAVE_DECL_ENVIRON)|g' \
- -e 's|@''HAVE_DECL_FCHDIR''@|$(HAVE_DECL_FCHDIR)|g' \
- -e 's|@''HAVE_DECL_FDATASYNC''@|$(HAVE_DECL_FDATASYNC)|g' \
- -e 's|@''HAVE_DECL_GETDOMAINNAME''@|$(HAVE_DECL_GETDOMAINNAME)|g' \
- -e 's|@''HAVE_DECL_GETLOGIN_R''@|$(HAVE_DECL_GETLOGIN_R)|g' \
- -e 's|@''HAVE_DECL_GETPAGESIZE''@|$(HAVE_DECL_GETPAGESIZE)|g' \
- -e 's|@''HAVE_DECL_GETUSERSHELL''@|$(HAVE_DECL_GETUSERSHELL)|g' \
- -e 's|@''HAVE_DECL_SETHOSTNAME''@|$(HAVE_DECL_SETHOSTNAME)|g' \
- -e 's|@''HAVE_DECL_TTYNAME_R''@|$(HAVE_DECL_TTYNAME_R)|g' \
- -e 's|@''HAVE_OS_H''@|$(HAVE_OS_H)|g' \
- -e 's|@''HAVE_SYS_PARAM_H''@|$(HAVE_SYS_PARAM_H)|g' \
- | \
- sed -e 's|@''REPLACE_CHOWN''@|$(REPLACE_CHOWN)|g' \
- -e 's|@''REPLACE_CLOSE''@|$(REPLACE_CLOSE)|g' \
- -e 's|@''REPLACE_DUP''@|$(REPLACE_DUP)|g' \
- -e 's|@''REPLACE_DUP2''@|$(REPLACE_DUP2)|g' \
- -e 's|@''REPLACE_FCHOWNAT''@|$(REPLACE_FCHOWNAT)|g' \
- -e 's|@''REPLACE_GETCWD''@|$(REPLACE_GETCWD)|g' \
- -e 's|@''REPLACE_GETDOMAINNAME''@|$(REPLACE_GETDOMAINNAME)|g' \
- -e 's|@''REPLACE_GETLOGIN_R''@|$(REPLACE_GETLOGIN_R)|g' \
- -e 's|@''REPLACE_GETGROUPS''@|$(REPLACE_GETGROUPS)|g' \
- -e 's|@''REPLACE_GETPAGESIZE''@|$(REPLACE_GETPAGESIZE)|g' \
- -e 's|@''REPLACE_ISATTY''@|$(REPLACE_ISATTY)|g' \
- -e 's|@''REPLACE_LCHOWN''@|$(REPLACE_LCHOWN)|g' \
- -e 's|@''REPLACE_LINK''@|$(REPLACE_LINK)|g' \
- -e 's|@''REPLACE_LINKAT''@|$(REPLACE_LINKAT)|g' \
- -e 's|@''REPLACE_LSEEK''@|$(REPLACE_LSEEK)|g' \
- -e 's|@''REPLACE_PREAD''@|$(REPLACE_PREAD)|g' \
- -e 's|@''REPLACE_PWRITE''@|$(REPLACE_PWRITE)|g' \
- -e 's|@''REPLACE_READ''@|$(REPLACE_READ)|g' \
- -e 's|@''REPLACE_READLINK''@|$(REPLACE_READLINK)|g' \
- -e 's|@''REPLACE_RMDIR''@|$(REPLACE_RMDIR)|g' \
- -e 's|@''REPLACE_SLEEP''@|$(REPLACE_SLEEP)|g' \
- -e 's|@''REPLACE_SYMLINK''@|$(REPLACE_SYMLINK)|g' \
- -e 's|@''REPLACE_TTYNAME_R''@|$(REPLACE_TTYNAME_R)|g' \
- -e 's|@''REPLACE_UNLINK''@|$(REPLACE_UNLINK)|g' \
- -e 's|@''REPLACE_UNLINKAT''@|$(REPLACE_UNLINKAT)|g' \
- -e 's|@''REPLACE_USLEEP''@|$(REPLACE_USLEEP)|g' \
- -e 's|@''REPLACE_WRITE''@|$(REPLACE_WRITE)|g' \
- -e 's|@''UNISTD_H_HAVE_WINSOCK2_H''@|$(UNISTD_H_HAVE_WINSOCK2_H)|g' \
- -e 's|@''UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS''@|$(UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS)|g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \
- } > $@-t && \
- mv $@-t $@
-
-# We need the following in order to create <wchar.h> when the system
-# version does not work standalone.
-wchar.h: wchar.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''HAVE_FEATURES_H''@|$(HAVE_FEATURES_H)|g' \
- -e 's|@''NEXT_WCHAR_H''@|$(NEXT_WCHAR_H)|g' \
- -e 's|@''HAVE_WCHAR_H''@|$(HAVE_WCHAR_H)|g' \
- -e 's/@''GNULIB_BTOWC''@/$(GNULIB_BTOWC)/g' \
- -e 's/@''GNULIB_WCTOB''@/$(GNULIB_WCTOB)/g' \
- -e 's/@''GNULIB_MBSINIT''@/$(GNULIB_MBSINIT)/g' \
- -e 's/@''GNULIB_MBRTOWC''@/$(GNULIB_MBRTOWC)/g' \
- -e 's/@''GNULIB_MBRLEN''@/$(GNULIB_MBRLEN)/g' \
- -e 's/@''GNULIB_MBSRTOWCS''@/$(GNULIB_MBSRTOWCS)/g' \
- -e 's/@''GNULIB_MBSNRTOWCS''@/$(GNULIB_MBSNRTOWCS)/g' \
- -e 's/@''GNULIB_WCRTOMB''@/$(GNULIB_WCRTOMB)/g' \
- -e 's/@''GNULIB_WCSRTOMBS''@/$(GNULIB_WCSRTOMBS)/g' \
- -e 's/@''GNULIB_WCSNRTOMBS''@/$(GNULIB_WCSNRTOMBS)/g' \
- -e 's/@''GNULIB_WCWIDTH''@/$(GNULIB_WCWIDTH)/g' \
- -e 's/@''GNULIB_WMEMCHR''@/$(GNULIB_WMEMCHR)/g' \
- -e 's/@''GNULIB_WMEMCMP''@/$(GNULIB_WMEMCMP)/g' \
- -e 's/@''GNULIB_WMEMCPY''@/$(GNULIB_WMEMCPY)/g' \
- -e 's/@''GNULIB_WMEMMOVE''@/$(GNULIB_WMEMMOVE)/g' \
- -e 's/@''GNULIB_WMEMSET''@/$(GNULIB_WMEMSET)/g' \
- -e 's/@''GNULIB_WCSLEN''@/$(GNULIB_WCSLEN)/g' \
- -e 's/@''GNULIB_WCSNLEN''@/$(GNULIB_WCSNLEN)/g' \
- -e 's/@''GNULIB_WCSCPY''@/$(GNULIB_WCSCPY)/g' \
- -e 's/@''GNULIB_WCPCPY''@/$(GNULIB_WCPCPY)/g' \
- -e 's/@''GNULIB_WCSNCPY''@/$(GNULIB_WCSNCPY)/g' \
- -e 's/@''GNULIB_WCPNCPY''@/$(GNULIB_WCPNCPY)/g' \
- -e 's/@''GNULIB_WCSCAT''@/$(GNULIB_WCSCAT)/g' \
- -e 's/@''GNULIB_WCSNCAT''@/$(GNULIB_WCSNCAT)/g' \
- -e 's/@''GNULIB_WCSCMP''@/$(GNULIB_WCSCMP)/g' \
- -e 's/@''GNULIB_WCSNCMP''@/$(GNULIB_WCSNCMP)/g' \
- -e 's/@''GNULIB_WCSCASECMP''@/$(GNULIB_WCSCASECMP)/g' \
- -e 's/@''GNULIB_WCSNCASECMP''@/$(GNULIB_WCSNCASECMP)/g' \
- -e 's/@''GNULIB_WCSCOLL''@/$(GNULIB_WCSCOLL)/g' \
- -e 's/@''GNULIB_WCSXFRM''@/$(GNULIB_WCSXFRM)/g' \
- -e 's/@''GNULIB_WCSDUP''@/$(GNULIB_WCSDUP)/g' \
- -e 's/@''GNULIB_WCSCHR''@/$(GNULIB_WCSCHR)/g' \
- -e 's/@''GNULIB_WCSRCHR''@/$(GNULIB_WCSRCHR)/g' \
- -e 's/@''GNULIB_WCSCSPN''@/$(GNULIB_WCSCSPN)/g' \
- -e 's/@''GNULIB_WCSSPN''@/$(GNULIB_WCSSPN)/g' \
- -e 's/@''GNULIB_WCSPBRK''@/$(GNULIB_WCSPBRK)/g' \
- -e 's/@''GNULIB_WCSSTR''@/$(GNULIB_WCSSTR)/g' \
- -e 's/@''GNULIB_WCSTOK''@/$(GNULIB_WCSTOK)/g' \
- -e 's/@''GNULIB_WCSWIDTH''@/$(GNULIB_WCSWIDTH)/g' \
- < $(srcdir)/wchar.in.h | \
- sed -e 's|@''HAVE_WINT_T''@|$(HAVE_WINT_T)|g' \
- -e 's|@''HAVE_BTOWC''@|$(HAVE_BTOWC)|g' \
- -e 's|@''HAVE_MBSINIT''@|$(HAVE_MBSINIT)|g' \
- -e 's|@''HAVE_MBRTOWC''@|$(HAVE_MBRTOWC)|g' \
- -e 's|@''HAVE_MBRLEN''@|$(HAVE_MBRLEN)|g' \
- -e 's|@''HAVE_MBSRTOWCS''@|$(HAVE_MBSRTOWCS)|g' \
- -e 's|@''HAVE_MBSNRTOWCS''@|$(HAVE_MBSNRTOWCS)|g' \
- -e 's|@''HAVE_WCRTOMB''@|$(HAVE_WCRTOMB)|g' \
- -e 's|@''HAVE_WCSRTOMBS''@|$(HAVE_WCSRTOMBS)|g' \
- -e 's|@''HAVE_WCSNRTOMBS''@|$(HAVE_WCSNRTOMBS)|g' \
- -e 's|@''HAVE_WMEMCHR''@|$(HAVE_WMEMCHR)|g' \
- -e 's|@''HAVE_WMEMCMP''@|$(HAVE_WMEMCMP)|g' \
- -e 's|@''HAVE_WMEMCPY''@|$(HAVE_WMEMCPY)|g' \
- -e 's|@''HAVE_WMEMMOVE''@|$(HAVE_WMEMMOVE)|g' \
- -e 's|@''HAVE_WMEMSET''@|$(HAVE_WMEMSET)|g' \
- -e 's|@''HAVE_WCSLEN''@|$(HAVE_WCSLEN)|g' \
- -e 's|@''HAVE_WCSNLEN''@|$(HAVE_WCSNLEN)|g' \
- -e 's|@''HAVE_WCSCPY''@|$(HAVE_WCSCPY)|g' \
- -e 's|@''HAVE_WCPCPY''@|$(HAVE_WCPCPY)|g' \
- -e 's|@''HAVE_WCSNCPY''@|$(HAVE_WCSNCPY)|g' \
- -e 's|@''HAVE_WCPNCPY''@|$(HAVE_WCPNCPY)|g' \
- -e 's|@''HAVE_WCSCAT''@|$(HAVE_WCSCAT)|g' \
- -e 's|@''HAVE_WCSNCAT''@|$(HAVE_WCSNCAT)|g' \
- -e 's|@''HAVE_WCSCMP''@|$(HAVE_WCSCMP)|g' \
- -e 's|@''HAVE_WCSNCMP''@|$(HAVE_WCSNCMP)|g' \
- -e 's|@''HAVE_WCSCASECMP''@|$(HAVE_WCSCASECMP)|g' \
- -e 's|@''HAVE_WCSNCASECMP''@|$(HAVE_WCSNCASECMP)|g' \
- -e 's|@''HAVE_WCSCOLL''@|$(HAVE_WCSCOLL)|g' \
- -e 's|@''HAVE_WCSXFRM''@|$(HAVE_WCSXFRM)|g' \
- -e 's|@''HAVE_WCSDUP''@|$(HAVE_WCSDUP)|g' \
- -e 's|@''HAVE_WCSCHR''@|$(HAVE_WCSCHR)|g' \
- -e 's|@''HAVE_WCSRCHR''@|$(HAVE_WCSRCHR)|g' \
- -e 's|@''HAVE_WCSCSPN''@|$(HAVE_WCSCSPN)|g' \
- -e 's|@''HAVE_WCSSPN''@|$(HAVE_WCSSPN)|g' \
- -e 's|@''HAVE_WCSPBRK''@|$(HAVE_WCSPBRK)|g' \
- -e 's|@''HAVE_WCSSTR''@|$(HAVE_WCSSTR)|g' \
- -e 's|@''HAVE_WCSTOK''@|$(HAVE_WCSTOK)|g' \
- -e 's|@''HAVE_WCSWIDTH''@|$(HAVE_WCSWIDTH)|g' \
- -e 's|@''HAVE_DECL_WCTOB''@|$(HAVE_DECL_WCTOB)|g' \
- -e 's|@''HAVE_DECL_WCWIDTH''@|$(HAVE_DECL_WCWIDTH)|g' \
- | \
- sed -e 's|@''REPLACE_MBSTATE_T''@|$(REPLACE_MBSTATE_T)|g' \
- -e 's|@''REPLACE_BTOWC''@|$(REPLACE_BTOWC)|g' \
- -e 's|@''REPLACE_WCTOB''@|$(REPLACE_WCTOB)|g' \
- -e 's|@''REPLACE_MBSINIT''@|$(REPLACE_MBSINIT)|g' \
- -e 's|@''REPLACE_MBRTOWC''@|$(REPLACE_MBRTOWC)|g' \
- -e 's|@''REPLACE_MBRLEN''@|$(REPLACE_MBRLEN)|g' \
- -e 's|@''REPLACE_MBSRTOWCS''@|$(REPLACE_MBSRTOWCS)|g' \
- -e 's|@''REPLACE_MBSNRTOWCS''@|$(REPLACE_MBSNRTOWCS)|g' \
- -e 's|@''REPLACE_WCRTOMB''@|$(REPLACE_WCRTOMB)|g' \
- -e 's|@''REPLACE_WCSRTOMBS''@|$(REPLACE_WCSRTOMBS)|g' \
- -e 's|@''REPLACE_WCSNRTOMBS''@|$(REPLACE_WCSNRTOMBS)|g' \
- -e 's|@''REPLACE_WCWIDTH''@|$(REPLACE_WCWIDTH)|g' \
- -e 's|@''REPLACE_WCSWIDTH''@|$(REPLACE_WCSWIDTH)|g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \
- } > $@-t && \
- mv $@-t $@
-
-# We need the following in order to create <wctype.h> when the system
-# doesn't have one that works with the given compiler.
-wctype.h: wctype.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(WARN_ON_USE_H)
- $(AM_V_GEN)rm -f $@-t $@ && \
- { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
- sed -e 's|@''GUARD_PREFIX''@|GL|g' \
- -e 's/@''HAVE_WCTYPE_H''@/$(HAVE_WCTYPE_H)/g' \
- -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
- -e 's|@''PRAGMA_SYSTEM_HEADER''@|@PRAGMA_SYSTEM_HEADER@|g' \
- -e 's|@''PRAGMA_COLUMNS''@|@PRAGMA_COLUMNS@|g' \
- -e 's|@''NEXT_WCTYPE_H''@|$(NEXT_WCTYPE_H)|g' \
- -e 's/@''GNULIB_ISWBLANK''@/$(GNULIB_ISWBLANK)/g' \
- -e 's/@''GNULIB_WCTYPE''@/$(GNULIB_WCTYPE)/g' \
- -e 's/@''GNULIB_ISWCTYPE''@/$(GNULIB_ISWCTYPE)/g' \
- -e 's/@''GNULIB_WCTRANS''@/$(GNULIB_WCTRANS)/g' \
- -e 's/@''GNULIB_TOWCTRANS''@/$(GNULIB_TOWCTRANS)/g' \
- -e 's/@''HAVE_ISWBLANK''@/$(HAVE_ISWBLANK)/g' \
- -e 's/@''HAVE_ISWCNTRL''@/$(HAVE_ISWCNTRL)/g' \
- -e 's/@''HAVE_WCTYPE_T''@/$(HAVE_WCTYPE_T)/g' \
- -e 's/@''HAVE_WCTRANS_T''@/$(HAVE_WCTRANS_T)/g' \
- -e 's/@''HAVE_WINT_T''@/$(HAVE_WINT_T)/g' \
- -e 's/@''REPLACE_ISWBLANK''@/$(REPLACE_ISWBLANK)/g' \
- -e 's/@''REPLACE_ISWCNTRL''@/$(REPLACE_ISWCNTRL)/g' \
- -e 's/@''REPLACE_TOWLOWER''@/$(REPLACE_TOWLOWER)/g' \
- -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \
- -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \
- < $(srcdir)/wctype.in.h; \
- } > $@-t && \
- mv $@-t $@
-
-mostlyclean-local: mostlyclean-generic
- @for dir in '' $(MOSTLYCLEANDIRS); do \
- if test -n "$$dir" && test -d $$dir; then \
- echo "rmdir $$dir"; rmdir $$dir; \
- fi; \
- done; \
- :
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-/* Character handling in C locale.
-
- Copyright 2000-2003, 2006, 2009-2012 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-/* Specification. */
-#define NO_C_CTYPE_MACROS
-#include "c-ctype.h"
-
-/* The function isascii is not locale dependent. Its use in EBCDIC is
- questionable. */
-bool
-c_isascii (int c)
-{
- return (c >= 0x00 && c <= 0x7f);
-}
-
-bool
-c_isalnum (int c)
-{
-#if C_CTYPE_CONSECUTIVE_DIGITS \
- && C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
-#if C_CTYPE_ASCII
- return ((c >= '0' && c <= '9')
- || ((c & ~0x20) >= 'A' && (c & ~0x20) <= 'Z'));
-#else
- return ((c >= '0' && c <= '9')
- || (c >= 'A' && c <= 'Z')
- || (c >= 'a' && c <= 'z'));
-#endif
-#else
- switch (c)
- {
- case '0': case '1': case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9':
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
- case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
- case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
- case 'Y': case 'Z':
- case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
- case 'g': case 'h': case 'i': case 'j': case 'k': case 'l':
- case 'm': case 'n': case 'o': case 'p': case 'q': case 'r':
- case 's': case 't': case 'u': case 'v': case 'w': case 'x':
- case 'y': case 'z':
- return 1;
- default:
- return 0;
- }
-#endif
-}
-
-bool
-c_isalpha (int c)
-{
-#if C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
-#if C_CTYPE_ASCII
- return ((c & ~0x20) >= 'A' && (c & ~0x20) <= 'Z');
-#else
- return ((c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z'));
-#endif
-#else
- switch (c)
- {
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
- case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
- case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
- case 'Y': case 'Z':
- case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
- case 'g': case 'h': case 'i': case 'j': case 'k': case 'l':
- case 'm': case 'n': case 'o': case 'p': case 'q': case 'r':
- case 's': case 't': case 'u': case 'v': case 'w': case 'x':
- case 'y': case 'z':
- return 1;
- default:
- return 0;
- }
-#endif
-}
-
-bool
-c_isblank (int c)
-{
- return (c == ' ' || c == '\t');
-}
-
-bool
-c_iscntrl (int c)
-{
-#if C_CTYPE_ASCII
- return ((c & ~0x1f) == 0 || c == 0x7f);
-#else
- switch (c)
- {
- case ' ': case '!': case '"': case '#': case '$': case '%':
- case '&': case '\'': case '(': case ')': case '*': case '+':
- case ',': case '-': case '.': case '/':
- case '0': case '1': case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9':
- case ':': case ';': case '<': case '=': case '>': case '?':
- case '@':
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
- case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
- case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
- case 'Y': case 'Z':
- case '[': case '\\': case ']': case '^': case '_': case '`':
- case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
- case 'g': case 'h': case 'i': case 'j': case 'k': case 'l':
- case 'm': case 'n': case 'o': case 'p': case 'q': case 'r':
- case 's': case 't': case 'u': case 'v': case 'w': case 'x':
- case 'y': case 'z':
- case '{': case '|': case '}': case '~':
- return 0;
- default:
- return 1;
- }
-#endif
-}
-
-bool
-c_isdigit (int c)
-{
-#if C_CTYPE_CONSECUTIVE_DIGITS
- return (c >= '0' && c <= '9');
-#else
- switch (c)
- {
- case '0': case '1': case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9':
- return 1;
- default:
- return 0;
- }
-#endif
-}
-
-bool
-c_islower (int c)
-{
-#if C_CTYPE_CONSECUTIVE_LOWERCASE
- return (c >= 'a' && c <= 'z');
-#else
- switch (c)
- {
- case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
- case 'g': case 'h': case 'i': case 'j': case 'k': case 'l':
- case 'm': case 'n': case 'o': case 'p': case 'q': case 'r':
- case 's': case 't': case 'u': case 'v': case 'w': case 'x':
- case 'y': case 'z':
- return 1;
- default:
- return 0;
- }
-#endif
-}
-
-bool
-c_isgraph (int c)
-{
-#if C_CTYPE_ASCII
- return (c >= '!' && c <= '~');
-#else
- switch (c)
- {
- case '!': case '"': case '#': case '$': case '%': case '&':
- case '\'': case '(': case ')': case '*': case '+': case ',':
- case '-': case '.': case '/':
- case '0': case '1': case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9':
- case ':': case ';': case '<': case '=': case '>': case '?':
- case '@':
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
- case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
- case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
- case 'Y': case 'Z':
- case '[': case '\\': case ']': case '^': case '_': case '`':
- case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
- case 'g': case 'h': case 'i': case 'j': case 'k': case 'l':
- case 'm': case 'n': case 'o': case 'p': case 'q': case 'r':
- case 's': case 't': case 'u': case 'v': case 'w': case 'x':
- case 'y': case 'z':
- case '{': case '|': case '}': case '~':
- return 1;
- default:
- return 0;
- }
-#endif
-}
-
-bool
-c_isprint (int c)
-{
-#if C_CTYPE_ASCII
- return (c >= ' ' && c <= '~');
-#else
- switch (c)
- {
- case ' ': case '!': case '"': case '#': case '$': case '%':
- case '&': case '\'': case '(': case ')': case '*': case '+':
- case ',': case '-': case '.': case '/':
- case '0': case '1': case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9':
- case ':': case ';': case '<': case '=': case '>': case '?':
- case '@':
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
- case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
- case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
- case 'Y': case 'Z':
- case '[': case '\\': case ']': case '^': case '_': case '`':
- case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
- case 'g': case 'h': case 'i': case 'j': case 'k': case 'l':
- case 'm': case 'n': case 'o': case 'p': case 'q': case 'r':
- case 's': case 't': case 'u': case 'v': case 'w': case 'x':
- case 'y': case 'z':
- case '{': case '|': case '}': case '~':
- return 1;
- default:
- return 0;
- }
-#endif
-}
-
-bool
-c_ispunct (int c)
-{
-#if C_CTYPE_ASCII
- return ((c >= '!' && c <= '~')
- && !((c >= '0' && c <= '9')
- || ((c & ~0x20) >= 'A' && (c & ~0x20) <= 'Z')));
-#else
- switch (c)
- {
- case '!': case '"': case '#': case '$': case '%': case '&':
- case '\'': case '(': case ')': case '*': case '+': case ',':
- case '-': case '.': case '/':
- case ':': case ';': case '<': case '=': case '>': case '?':
- case '@':
- case '[': case '\\': case ']': case '^': case '_': case '`':
- case '{': case '|': case '}': case '~':
- return 1;
- default:
- return 0;
- }
-#endif
-}
-
-bool
-c_isspace (int c)
-{
- return (c == ' ' || c == '\t'
- || c == '\n' || c == '\v' || c == '\f' || c == '\r');
-}
-
-bool
-c_isupper (int c)
-{
-#if C_CTYPE_CONSECUTIVE_UPPERCASE
- return (c >= 'A' && c <= 'Z');
-#else
- switch (c)
- {
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
- case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
- case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
- case 'Y': case 'Z':
- return 1;
- default:
- return 0;
- }
-#endif
-}
-
-bool
-c_isxdigit (int c)
-{
-#if C_CTYPE_CONSECUTIVE_DIGITS \
- && C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
-#if C_CTYPE_ASCII
- return ((c >= '0' && c <= '9')
- || ((c & ~0x20) >= 'A' && (c & ~0x20) <= 'F'));
-#else
- return ((c >= '0' && c <= '9')
- || (c >= 'A' && c <= 'F')
- || (c >= 'a' && c <= 'f'));
-#endif
-#else
- switch (c)
- {
- case '0': case '1': case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9':
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
- return 1;
- default:
- return 0;
- }
-#endif
-}
-
-int
-c_tolower (int c)
-{
-#if C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
- return (c >= 'A' && c <= 'Z' ? c - 'A' + 'a' : c);
-#else
- switch (c)
- {
- case 'A': return 'a';
- case 'B': return 'b';
- case 'C': return 'c';
- case 'D': return 'd';
- case 'E': return 'e';
- case 'F': return 'f';
- case 'G': return 'g';
- case 'H': return 'h';
- case 'I': return 'i';
- case 'J': return 'j';
- case 'K': return 'k';
- case 'L': return 'l';
- case 'M': return 'm';
- case 'N': return 'n';
- case 'O': return 'o';
- case 'P': return 'p';
- case 'Q': return 'q';
- case 'R': return 'r';
- case 'S': return 's';
- case 'T': return 't';
- case 'U': return 'u';
- case 'V': return 'v';
- case 'W': return 'w';
- case 'X': return 'x';
- case 'Y': return 'y';
- case 'Z': return 'z';
- default: return c;
- }
-#endif
-}
-
-int
-c_toupper (int c)
-{
-#if C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
- return (c >= 'a' && c <= 'z' ? c - 'a' + 'A' : c);
-#else
- switch (c)
- {
- case 'a': return 'A';
- case 'b': return 'B';
- case 'c': return 'C';
- case 'd': return 'D';
- case 'e': return 'E';
- case 'f': return 'F';
- case 'g': return 'G';
- case 'h': return 'H';
- case 'i': return 'I';
- case 'j': return 'J';
- case 'k': return 'K';
- case 'l': return 'L';
- case 'm': return 'M';
- case 'n': return 'N';
- case 'o': return 'O';
- case 'p': return 'P';
- case 'q': return 'Q';
- case 'r': return 'R';
- case 's': return 'S';
- case 't': return 'T';
- case 'u': return 'U';
- case 'v': return 'V';
- case 'w': return 'W';
- case 'x': return 'X';
- case 'y': return 'Y';
- case 'z': return 'Z';
- default: return c;
- }
-#endif
-}
+++ /dev/null
-/* Character handling in C locale.
-
- These functions work like the corresponding functions in <ctype.h>,
- except that they have the C (POSIX) locale hardwired, whereas the
- <ctype.h> functions' behaviour depends on the current locale set via
- setlocale.
-
- Copyright (C) 2000-2003, 2006, 2008-2012 Free Software Foundation, Inc.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 3 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef C_CTYPE_H
-#define C_CTYPE_H
-
-#include <stdbool.h>
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* The functions defined in this file assume the "C" locale and a character
- set without diacritics (ASCII-US or EBCDIC-US or something like that).
- Even if the "C" locale on a particular system is an extension of the ASCII
- character set (like on BeOS, where it is UTF-8, or on AmigaOS, where it
- is ISO-8859-1), the functions in this file recognize only the ASCII
- characters. */
-
-
-/* Check whether the ASCII optimizations apply. */
-
-/* ANSI C89 (and ISO C99 5.2.1.3 too) already guarantees that
- '0', '1', ..., '9' have consecutive integer values. */
-#define C_CTYPE_CONSECUTIVE_DIGITS 1
-
-#if ('A' <= 'Z') \
- && ('A' + 1 == 'B') && ('B' + 1 == 'C') && ('C' + 1 == 'D') \
- && ('D' + 1 == 'E') && ('E' + 1 == 'F') && ('F' + 1 == 'G') \
- && ('G' + 1 == 'H') && ('H' + 1 == 'I') && ('I' + 1 == 'J') \
- && ('J' + 1 == 'K') && ('K' + 1 == 'L') && ('L' + 1 == 'M') \
- && ('M' + 1 == 'N') && ('N' + 1 == 'O') && ('O' + 1 == 'P') \
- && ('P' + 1 == 'Q') && ('Q' + 1 == 'R') && ('R' + 1 == 'S') \
- && ('S' + 1 == 'T') && ('T' + 1 == 'U') && ('U' + 1 == 'V') \
- && ('V' + 1 == 'W') && ('W' + 1 == 'X') && ('X' + 1 == 'Y') \
- && ('Y' + 1 == 'Z')
-#define C_CTYPE_CONSECUTIVE_UPPERCASE 1
-#endif
-
-#if ('a' <= 'z') \
- && ('a' + 1 == 'b') && ('b' + 1 == 'c') && ('c' + 1 == 'd') \
- && ('d' + 1 == 'e') && ('e' + 1 == 'f') && ('f' + 1 == 'g') \
- && ('g' + 1 == 'h') && ('h' + 1 == 'i') && ('i' + 1 == 'j') \
- && ('j' + 1 == 'k') && ('k' + 1 == 'l') && ('l' + 1 == 'm') \
- && ('m' + 1 == 'n') && ('n' + 1 == 'o') && ('o' + 1 == 'p') \
- && ('p' + 1 == 'q') && ('q' + 1 == 'r') && ('r' + 1 == 's') \
- && ('s' + 1 == 't') && ('t' + 1 == 'u') && ('u' + 1 == 'v') \
- && ('v' + 1 == 'w') && ('w' + 1 == 'x') && ('x' + 1 == 'y') \
- && ('y' + 1 == 'z')
-#define C_CTYPE_CONSECUTIVE_LOWERCASE 1
-#endif
-
-#if (' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
- && ('%' == 37) && ('&' == 38) && ('\'' == 39) && ('(' == 40) \
- && (')' == 41) && ('*' == 42) && ('+' == 43) && (',' == 44) \
- && ('-' == 45) && ('.' == 46) && ('/' == 47) && ('0' == 48) \
- && ('1' == 49) && ('2' == 50) && ('3' == 51) && ('4' == 52) \
- && ('5' == 53) && ('6' == 54) && ('7' == 55) && ('8' == 56) \
- && ('9' == 57) && (':' == 58) && (';' == 59) && ('<' == 60) \
- && ('=' == 61) && ('>' == 62) && ('?' == 63) && ('A' == 65) \
- && ('B' == 66) && ('C' == 67) && ('D' == 68) && ('E' == 69) \
- && ('F' == 70) && ('G' == 71) && ('H' == 72) && ('I' == 73) \
- && ('J' == 74) && ('K' == 75) && ('L' == 76) && ('M' == 77) \
- && ('N' == 78) && ('O' == 79) && ('P' == 80) && ('Q' == 81) \
- && ('R' == 82) && ('S' == 83) && ('T' == 84) && ('U' == 85) \
- && ('V' == 86) && ('W' == 87) && ('X' == 88) && ('Y' == 89) \
- && ('Z' == 90) && ('[' == 91) && ('\\' == 92) && (']' == 93) \
- && ('^' == 94) && ('_' == 95) && ('a' == 97) && ('b' == 98) \
- && ('c' == 99) && ('d' == 100) && ('e' == 101) && ('f' == 102) \
- && ('g' == 103) && ('h' == 104) && ('i' == 105) && ('j' == 106) \
- && ('k' == 107) && ('l' == 108) && ('m' == 109) && ('n' == 110) \
- && ('o' == 111) && ('p' == 112) && ('q' == 113) && ('r' == 114) \
- && ('s' == 115) && ('t' == 116) && ('u' == 117) && ('v' == 118) \
- && ('w' == 119) && ('x' == 120) && ('y' == 121) && ('z' == 122) \
- && ('{' == 123) && ('|' == 124) && ('}' == 125) && ('~' == 126)
-/* The character set is ASCII or one of its variants or extensions, not EBCDIC.
- Testing the value of '\n' and '\r' is not relevant. */
-#define C_CTYPE_ASCII 1
-#endif
-
-
-/* Function declarations. */
-
-/* Unlike the functions in <ctype.h>, which require an argument in the range
- of the 'unsigned char' type, the functions here operate on values that are
- in the 'unsigned char' range or in the 'char' range. In other words,
- when you have a 'char' value, you need to cast it before using it as
- argument to a <ctype.h> function:
-
- const char *s = ...;
- if (isalpha ((unsigned char) *s)) ...
-
- but you don't need to cast it for the functions defined in this file:
-
- const char *s = ...;
- if (c_isalpha (*s)) ...
- */
-
-extern bool c_isascii (int c) _GL_ATTRIBUTE_CONST; /* not locale dependent */
-
-extern bool c_isalnum (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_isalpha (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_isblank (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_iscntrl (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_isdigit (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_islower (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_isgraph (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_isprint (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_ispunct (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_isspace (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_isupper (int c) _GL_ATTRIBUTE_CONST;
-extern bool c_isxdigit (int c) _GL_ATTRIBUTE_CONST;
-
-extern int c_tolower (int c) _GL_ATTRIBUTE_CONST;
-extern int c_toupper (int c) _GL_ATTRIBUTE_CONST;
-
-
-#if defined __GNUC__ && defined __OPTIMIZE__ && !defined __OPTIMIZE_SIZE__ && !defined NO_C_CTYPE_MACROS
-
-/* ASCII optimizations. */
-
-#undef c_isascii
-#define c_isascii(c) \
- ({ int __c = (c); \
- (__c >= 0x00 && __c <= 0x7f); \
- })
-
-#if C_CTYPE_CONSECUTIVE_DIGITS \
- && C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
-#if C_CTYPE_ASCII
-#undef c_isalnum
-#define c_isalnum(c) \
- ({ int __c = (c); \
- ((__c >= '0' && __c <= '9') \
- || ((__c & ~0x20) >= 'A' && (__c & ~0x20) <= 'Z')); \
- })
-#else
-#undef c_isalnum
-#define c_isalnum(c) \
- ({ int __c = (c); \
- ((__c >= '0' && __c <= '9') \
- || (__c >= 'A' && __c <= 'Z') \
- || (__c >= 'a' && __c <= 'z')); \
- })
-#endif
-#endif
-
-#if C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
-#if C_CTYPE_ASCII
-#undef c_isalpha
-#define c_isalpha(c) \
- ({ int __c = (c); \
- ((__c & ~0x20) >= 'A' && (__c & ~0x20) <= 'Z'); \
- })
-#else
-#undef c_isalpha
-#define c_isalpha(c) \
- ({ int __c = (c); \
- ((__c >= 'A' && __c <= 'Z') || (__c >= 'a' && __c <= 'z')); \
- })
-#endif
-#endif
-
-#undef c_isblank
-#define c_isblank(c) \
- ({ int __c = (c); \
- (__c == ' ' || __c == '\t'); \
- })
-
-#if C_CTYPE_ASCII
-#undef c_iscntrl
-#define c_iscntrl(c) \
- ({ int __c = (c); \
- ((__c & ~0x1f) == 0 || __c == 0x7f); \
- })
-#endif
-
-#if C_CTYPE_CONSECUTIVE_DIGITS
-#undef c_isdigit
-#define c_isdigit(c) \
- ({ int __c = (c); \
- (__c >= '0' && __c <= '9'); \
- })
-#endif
-
-#if C_CTYPE_CONSECUTIVE_LOWERCASE
-#undef c_islower
-#define c_islower(c) \
- ({ int __c = (c); \
- (__c >= 'a' && __c <= 'z'); \
- })
-#endif
-
-#if C_CTYPE_ASCII
-#undef c_isgraph
-#define c_isgraph(c) \
- ({ int __c = (c); \
- (__c >= '!' && __c <= '~'); \
- })
-#endif
-
-#if C_CTYPE_ASCII
-#undef c_isprint
-#define c_isprint(c) \
- ({ int __c = (c); \
- (__c >= ' ' && __c <= '~'); \
- })
-#endif
-
-#if C_CTYPE_ASCII
-#undef c_ispunct
-#define c_ispunct(c) \
- ({ int _c = (c); \
- (c_isgraph (_c) && ! c_isalnum (_c)); \
- })
-#endif
-
-#undef c_isspace
-#define c_isspace(c) \
- ({ int __c = (c); \
- (__c == ' ' || __c == '\t' \
- || __c == '\n' || __c == '\v' || __c == '\f' || __c == '\r'); \
- })
-
-#if C_CTYPE_CONSECUTIVE_UPPERCASE
-#undef c_isupper
-#define c_isupper(c) \
- ({ int __c = (c); \
- (__c >= 'A' && __c <= 'Z'); \
- })
-#endif
-
-#if C_CTYPE_CONSECUTIVE_DIGITS \
- && C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
-#if C_CTYPE_ASCII
-#undef c_isxdigit
-#define c_isxdigit(c) \
- ({ int __c = (c); \
- ((__c >= '0' && __c <= '9') \
- || ((__c & ~0x20) >= 'A' && (__c & ~0x20) <= 'F')); \
- })
-#else
-#undef c_isxdigit
-#define c_isxdigit(c) \
- ({ int __c = (c); \
- ((__c >= '0' && __c <= '9') \
- || (__c >= 'A' && __c <= 'F') \
- || (__c >= 'a' && __c <= 'f')); \
- })
-#endif
-#endif
-
-#if C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
-#undef c_tolower
-#define c_tolower(c) \
- ({ int __c = (c); \
- (__c >= 'A' && __c <= 'Z' ? __c - 'A' + 'a' : __c); \
- })
-#undef c_toupper
-#define c_toupper(c) \
- ({ int __c = (c); \
- (__c >= 'a' && __c <= 'z' ? __c - 'a' + 'A' : __c); \
- })
-#endif
-
-#endif /* optimizing for speed */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* C_CTYPE_H */
+++ /dev/null
-/* Case-insensitive string comparison functions in C locale.
- Copyright (C) 1995-1996, 2001, 2003, 2005, 2009-2012 Free Software
- Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef C_STRCASE_H
-#define C_STRCASE_H
-
-#include <stddef.h>
-
-
-/* The functions defined in this file assume the "C" locale and a character
- set without diacritics (ASCII-US or EBCDIC-US or something like that).
- Even if the "C" locale on a particular system is an extension of the ASCII
- character set (like on BeOS, where it is UTF-8, or on AmigaOS, where it
- is ISO-8859-1), the functions in this file recognize only the ASCII
- characters. More precisely, one of the string arguments must be an ASCII
- string; the other one can also contain non-ASCII characters (but then
- the comparison result will be nonzero). */
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* Compare strings S1 and S2, ignoring case, returning less than, equal to or
- greater than zero if S1 is lexicographically less than, equal to or greater
- than S2. */
-extern int c_strcasecmp (const char *s1, const char *s2) _GL_ATTRIBUTE_PURE;
-
-/* Compare no more than N characters of strings S1 and S2, ignoring case,
- returning less than, equal to or greater than zero if S1 is
- lexicographically less than, equal to or greater than S2. */
-extern int c_strncasecmp (const char *s1, const char *s2, size_t n)
- _GL_ATTRIBUTE_PURE;
-
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* C_STRCASE_H */
+++ /dev/null
-/* c-strcasecmp.c -- case insensitive string comparator in C locale
- Copyright (C) 1998-1999, 2005-2006, 2009-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-/* Specification. */
-#include "c-strcase.h"
-
-#include <limits.h>
-
-#include "c-ctype.h"
-
-int
-c_strcasecmp (const char *s1, const char *s2)
-{
- register const unsigned char *p1 = (const unsigned char *) s1;
- register const unsigned char *p2 = (const unsigned char *) s2;
- unsigned char c1, c2;
-
- if (p1 == p2)
- return 0;
-
- do
- {
- c1 = c_tolower (*p1);
- c2 = c_tolower (*p2);
-
- if (c1 == '\0')
- break;
-
- ++p1;
- ++p2;
- }
- while (c1 == c2);
-
- if (UCHAR_MAX <= INT_MAX)
- return c1 - c2;
- else
- /* On machines where 'char' and 'int' are types of the same size, the
- difference of two 'unsigned char' values - including the sign bit -
- doesn't fit in an 'int'. */
- return (c1 > c2 ? 1 : c1 < c2 ? -1 : 0);
-}
+++ /dev/null
-/* Optimized case-insensitive string comparison in C locale.
- Copyright (C) 2001-2002, 2007, 2009-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published
- by the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Bruno Haible <bruno@clisp.org>. */
-
-#include "c-strcase.h"
-#include "c-ctype.h"
-
-/* STRCASEEQ allows to optimize string comparison with a small literal string.
- STRCASEEQ (s, "UTF-8", 'U','T','F','-','8',0,0,0,0)
- is semantically equivalent to
- c_strcasecmp (s, "UTF-8") == 0
- just faster. */
-
-/* Help GCC to generate good code for string comparisons with
- immediate strings. */
-#if defined (__GNUC__) && defined (__OPTIMIZE__)
-
-/* Case insensitive comparison of ASCII characters. */
-# if C_CTYPE_ASCII
-# define CASEEQ(other,upper) \
- (c_isupper (upper) ? ((other) & ~0x20) == (upper) : (other) == (upper))
-# elif C_CTYPE_CONSECUTIVE_UPPERCASE && C_CTYPE_CONSECUTIVE_LOWERCASE
-# define CASEEQ(other,upper) \
- (c_isupper (upper) ? (other) == (upper) || (other) == (upper) - 'A' + 'a' : (other) == (upper))
-# else
-# define CASEEQ(other,upper) \
- (c_toupper (other) == (upper))
-# endif
-
-static inline int
-strcaseeq9 (const char *s1, const char *s2)
-{
- return c_strcasecmp (s1 + 9, s2 + 9) == 0;
-}
-
-static inline int
-strcaseeq8 (const char *s1, const char *s2, char s28)
-{
- if (CASEEQ (s1[8], s28))
- {
- if (s28 == 0)
- return 1;
- else
- return strcaseeq9 (s1, s2);
- }
- else
- return 0;
-}
-
-static inline int
-strcaseeq7 (const char *s1, const char *s2, char s27, char s28)
-{
- if (CASEEQ (s1[7], s27))
- {
- if (s27 == 0)
- return 1;
- else
- return strcaseeq8 (s1, s2, s28);
- }
- else
- return 0;
-}
-
-static inline int
-strcaseeq6 (const char *s1, const char *s2, char s26, char s27, char s28)
-{
- if (CASEEQ (s1[6], s26))
- {
- if (s26 == 0)
- return 1;
- else
- return strcaseeq7 (s1, s2, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-strcaseeq5 (const char *s1, const char *s2, char s25, char s26, char s27, char s28)
-{
- if (CASEEQ (s1[5], s25))
- {
- if (s25 == 0)
- return 1;
- else
- return strcaseeq6 (s1, s2, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-strcaseeq4 (const char *s1, const char *s2, char s24, char s25, char s26, char s27, char s28)
-{
- if (CASEEQ (s1[4], s24))
- {
- if (s24 == 0)
- return 1;
- else
- return strcaseeq5 (s1, s2, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-strcaseeq3 (const char *s1, const char *s2, char s23, char s24, char s25, char s26, char s27, char s28)
-{
- if (CASEEQ (s1[3], s23))
- {
- if (s23 == 0)
- return 1;
- else
- return strcaseeq4 (s1, s2, s24, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-strcaseeq2 (const char *s1, const char *s2, char s22, char s23, char s24, char s25, char s26, char s27, char s28)
-{
- if (CASEEQ (s1[2], s22))
- {
- if (s22 == 0)
- return 1;
- else
- return strcaseeq3 (s1, s2, s23, s24, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-strcaseeq1 (const char *s1, const char *s2, char s21, char s22, char s23, char s24, char s25, char s26, char s27, char s28)
-{
- if (CASEEQ (s1[1], s21))
- {
- if (s21 == 0)
- return 1;
- else
- return strcaseeq2 (s1, s2, s22, s23, s24, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-strcaseeq0 (const char *s1, const char *s2, char s20, char s21, char s22, char s23, char s24, char s25, char s26, char s27, char s28)
-{
- if (CASEEQ (s1[0], s20))
- {
- if (s20 == 0)
- return 1;
- else
- return strcaseeq1 (s1, s2, s21, s22, s23, s24, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-#define STRCASEEQ(s1,s2,s20,s21,s22,s23,s24,s25,s26,s27,s28) \
- strcaseeq0 (s1, s2, s20, s21, s22, s23, s24, s25, s26, s27, s28)
-
-#else
-
-#define STRCASEEQ(s1,s2,s20,s21,s22,s23,s24,s25,s26,s27,s28) \
- (c_strcasecmp (s1, s2) == 0)
-
-#endif
+++ /dev/null
-/* c-strncasecmp.c -- case insensitive string comparator in C locale
- Copyright (C) 1998-1999, 2005-2006, 2009-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-/* Specification. */
-#include "c-strcase.h"
-
-#include <limits.h>
-
-#include "c-ctype.h"
-
-int
-c_strncasecmp (const char *s1, const char *s2, size_t n)
-{
- register const unsigned char *p1 = (const unsigned char *) s1;
- register const unsigned char *p2 = (const unsigned char *) s2;
- unsigned char c1, c2;
-
- if (p1 == p2 || n == 0)
- return 0;
-
- do
- {
- c1 = c_tolower (*p1);
- c2 = c_tolower (*p2);
-
- if (--n == 0 || c1 == '\0')
- break;
-
- ++p1;
- ++p2;
- }
- while (c1 == c2);
-
- if (UCHAR_MAX <= INT_MAX)
- return c1 - c2;
- else
- /* On machines where 'char' and 'int' are types of the same size, the
- difference of two 'unsigned char' values - including the sign bit -
- doesn't fit in an 'int'. */
- return (c1 > c2 ? 1 : c1 < c2 ? -1 : 0);
-}
+++ /dev/null
-/* Close a stream, with nicer error checking than fclose's.
-
- Copyright (C) 1998-2002, 2004, 2006-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-#include "close-stream.h"
-
-#include <errno.h>
-#include <stdbool.h>
-
-#include "fpending.h"
-
-#if USE_UNLOCKED_IO
-# include "unlocked-io.h"
-#endif
-
-/* Close STREAM. Return 0 if successful, EOF (setting errno)
- otherwise. A failure might set errno to 0 if the error number
- cannot be determined.
-
- A failure with errno set to EPIPE may or may not indicate an error
- situation worth signaling to the user. See the documentation of the
- close_stdout_set_ignore_EPIPE function for details.
-
- If a program writes *anything* to STREAM, that program should close
- STREAM and make sure that it succeeds before exiting. Otherwise,
- suppose that you go to the extreme of checking the return status
- of every function that does an explicit write to STREAM. The last
- printf can succeed in writing to the internal stream buffer, and yet
- the fclose(STREAM) could still fail (due e.g., to a disk full error)
- when it tries to write out that buffered data. Thus, you would be
- left with an incomplete output file and the offending program would
- exit successfully. Even calling fflush is not always sufficient,
- since some file systems (NFS and CODA) buffer written/flushed data
- until an actual close call.
-
- Besides, it's wasteful to check the return value from every call
- that writes to STREAM -- just let the internal stream state record
- the failure. That's what the ferror test is checking below. */
-
-int
-close_stream (FILE *stream)
-{
- const bool some_pending = (__fpending (stream) != 0);
- const bool prev_fail = (ferror (stream) != 0);
- const bool fclose_fail = (fclose (stream) != 0);
-
- /* Return an error indication if there was a previous failure or if
- fclose failed, with one exception: ignore an fclose failure if
- there was no previous error, no data remains to be flushed, and
- fclose failed with EBADF. That can happen when a program like cp
- is invoked like this 'cp a b >&-' (i.e., with standard output
- closed) and doesn't generate any output (hence no previous error
- and nothing to be flushed). */
-
- if (prev_fail || (fclose_fail && (some_pending || errno != EBADF)))
- {
- if (! fclose_fail)
- errno = 0;
- return EOF;
- }
-
- return 0;
-}
+++ /dev/null
-#include <stdio.h>
-int close_stream (FILE *stream);
+++ /dev/null
-/* Close standard output and standard error, exiting with a diagnostic on error.
-
- Copyright (C) 1998-2002, 2004, 2006, 2008-2012 Free Software Foundation,
- Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-#include "closeout.h"
-
-#include <errno.h>
-#include <stdbool.h>
-#include <stdio.h>
-#include <unistd.h>
-
-#include "gettext.h"
-#define _(msgid) gettext (msgid)
-
-#include "close-stream.h"
-#include "error.h"
-#include "exitfail.h"
-#include "quotearg.h"
-
-static const char *file_name;
-
-/* Set the file name to be reported in the event an error is detected
- by close_stdout. */
-void
-close_stdout_set_file_name (const char *file)
-{
- file_name = file;
-}
-
-static bool ignore_EPIPE /* = false */;
-
-/* Specify the reaction to an EPIPE error during the closing of stdout:
- - If ignore = true, it shall be ignored.
- - If ignore = false, it shall evoke a diagnostic, along with a nonzero
- exit status.
- The default is ignore = false.
-
- This setting matters only if the SIGPIPE signal is ignored (i.e. its
- handler set to SIG_IGN) or blocked. Only particular programs need to
- temporarily ignore SIGPIPE. If SIGPIPE is ignored or blocked because
- it was ignored or blocked in the parent process when it created the
- child process, it usually is a bug in the parent process: It is bad
- practice to have SIGPIPE ignored or blocked while creating a child
- process.
-
- EPIPE occurs when writing to a pipe or socket that has no readers now,
- when SIGPIPE is ignored or blocked.
-
- The ignore = false setting is suitable for a scenario where it is normally
- guaranteed that the pipe writer terminates before the pipe reader. In
- this case, an EPIPE is an indication of a premature termination of the
- pipe reader and should lead to a diagnostic and a nonzero exit status.
-
- The ignore = true setting is suitable for a scenario where you don't know
- ahead of time whether the pipe writer or the pipe reader will terminate
- first. In this case, an EPIPE is an indication that the pipe writer can
- stop doing useless write() calls; this is what close_stdout does anyway.
- EPIPE is part of the normal pipe/socket shutdown protocol in this case,
- and should not lead to a diagnostic message. */
-
-void
-close_stdout_set_ignore_EPIPE (bool ignore)
-{
- ignore_EPIPE = ignore;
-}
-
-/* Close standard output. On error, issue a diagnostic and _exit
- with status 'exit_failure'.
-
- Also close standard error. On error, _exit with status 'exit_failure'.
-
- Since close_stdout is commonly registered via 'atexit', POSIX
- and the C standard both say that it should not call 'exit',
- because the behavior is undefined if 'exit' is called more than
- once. So it calls '_exit' instead of 'exit'. If close_stdout
- is registered via atexit before other functions are registered,
- the other functions can act before this _exit is invoked.
-
- Applications that use close_stdout should flush any streams
- other than stdout and stderr before exiting, since the call to
- _exit will bypass other buffer flushing. Applications should
- be flushing and closing other streams anyway, to check for I/O
- errors. Also, applications should not use tmpfile, since _exit
- can bypass the removal of these files.
-
- It's important to detect such failures and exit nonzero because many
- tools (most notably 'make' and other build-management systems) depend
- on being able to detect failure in other tools via their exit status. */
-
-void
-close_stdout (void)
-{
- if (close_stream (stdout) != 0
- && !(ignore_EPIPE && errno == EPIPE))
- {
- char const *write_error = _("write error");
- if (file_name)
- error (0, errno, "%s: %s", quotearg_colon (file_name),
- write_error);
- else
- error (0, errno, "%s", write_error);
-
- _exit (exit_failure);
- }
-
- if (close_stream (stderr) != 0)
- _exit (exit_failure);
-}
+++ /dev/null
-/* Close standard output and standard error.
-
- Copyright (C) 1998, 2000, 2003-2004, 2006, 2008-2012 Free Software
- Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef CLOSEOUT_H
-# define CLOSEOUT_H 1
-
-# include <stdbool.h>
-
-# ifdef __cplusplus
-extern "C" {
-# endif
-
-void close_stdout_set_file_name (const char *file);
-void close_stdout_set_ignore_EPIPE (bool ignore);
-void close_stdout (void);
-
-# ifdef __cplusplus
-}
-# endif
-
-#endif
+++ /dev/null
-#! /bin/sh
-# Output a system dependent table of character encoding aliases.
-#
-# Copyright (C) 2000-2004, 2006-2012 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# The table consists of lines of the form
-# ALIAS CANONICAL
-#
-# ALIAS is the (system dependent) result of "nl_langinfo (CODESET)".
-# ALIAS is compared in a case sensitive way.
-#
-# CANONICAL is the GNU canonical name for this character encoding.
-# It must be an encoding supported by libiconv. Support by GNU libc is
-# also desirable. CANONICAL is case insensitive. Usually an upper case
-# MIME charset name is preferred.
-# The current list of GNU canonical charset names is as follows.
-#
-# name MIME? used by which systems
-# (darwin = MacOS X, woe32 = native Windows)
-#
-# ASCII, ANSI_X3.4-1968 glibc solaris freebsd netbsd darwin cygwin
-# ISO-8859-1 Y glibc aix hpux irix osf solaris freebsd netbsd openbsd darwin cygwin
-# ISO-8859-2 Y glibc aix hpux irix osf solaris freebsd netbsd openbsd darwin cygwin
-# ISO-8859-3 Y glibc solaris cygwin
-# ISO-8859-4 Y osf solaris freebsd netbsd openbsd darwin
-# ISO-8859-5 Y glibc aix hpux irix osf solaris freebsd netbsd openbsd darwin cygwin
-# ISO-8859-6 Y glibc aix hpux solaris cygwin
-# ISO-8859-7 Y glibc aix hpux irix osf solaris netbsd openbsd darwin cygwin
-# ISO-8859-8 Y glibc aix hpux osf solaris cygwin
-# ISO-8859-9 Y glibc aix hpux irix osf solaris darwin cygwin
-# ISO-8859-13 glibc netbsd openbsd darwin cygwin
-# ISO-8859-14 glibc cygwin
-# ISO-8859-15 glibc aix osf solaris freebsd netbsd openbsd darwin cygwin
-# KOI8-R Y glibc solaris freebsd netbsd openbsd darwin
-# KOI8-U Y glibc freebsd netbsd openbsd darwin cygwin
-# KOI8-T glibc
-# CP437 dos
-# CP775 dos
-# CP850 aix osf dos
-# CP852 dos
-# CP855 dos
-# CP856 aix
-# CP857 dos
-# CP861 dos
-# CP862 dos
-# CP864 dos
-# CP865 dos
-# CP866 freebsd netbsd openbsd darwin dos
-# CP869 dos
-# CP874 woe32 dos
-# CP922 aix
-# CP932 aix cygwin woe32 dos
-# CP943 aix
-# CP949 osf darwin woe32 dos
-# CP950 woe32 dos
-# CP1046 aix
-# CP1124 aix
-# CP1125 dos
-# CP1129 aix
-# CP1131 darwin
-# CP1250 woe32
-# CP1251 glibc solaris netbsd openbsd darwin cygwin woe32
-# CP1252 aix woe32
-# CP1253 woe32
-# CP1254 woe32
-# CP1255 glibc woe32
-# CP1256 woe32
-# CP1257 woe32
-# GB2312 Y glibc aix hpux irix solaris freebsd netbsd darwin
-# EUC-JP Y glibc aix hpux irix osf solaris freebsd netbsd darwin
-# EUC-KR Y glibc aix hpux irix osf solaris freebsd netbsd darwin cygwin
-# EUC-TW glibc aix hpux irix osf solaris netbsd
-# BIG5 Y glibc aix hpux osf solaris freebsd netbsd darwin cygwin
-# BIG5-HKSCS glibc solaris darwin
-# GBK glibc aix osf solaris darwin cygwin woe32 dos
-# GB18030 glibc solaris netbsd darwin
-# SHIFT_JIS Y hpux osf solaris freebsd netbsd darwin
-# JOHAB glibc solaris woe32
-# TIS-620 glibc aix hpux osf solaris cygwin
-# VISCII Y glibc
-# TCVN5712-1 glibc
-# ARMSCII-8 glibc darwin
-# GEORGIAN-PS glibc cygwin
-# PT154 glibc
-# HP-ROMAN8 hpux
-# HP-ARABIC8 hpux
-# HP-GREEK8 hpux
-# HP-HEBREW8 hpux
-# HP-TURKISH8 hpux
-# HP-KANA8 hpux
-# DEC-KANJI osf
-# DEC-HANYU osf
-# UTF-8 Y glibc aix hpux osf solaris netbsd darwin cygwin
-#
-# Note: Names which are not marked as being a MIME name should not be used in
-# Internet protocols for information interchange (mail, news, etc.).
-#
-# Note: ASCII and ANSI_X3.4-1968 are synonymous canonical names. Applications
-# must understand both names and treat them as equivalent.
-#
-# The first argument passed to this file is the canonical host specification,
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-
-host="$1"
-os=`echo "$host" | sed -e 's/^[^-]*-[^-]*-\(.*\)$/\1/'`
-echo "# This file contains a table of character encoding aliases,"
-echo "# suitable for operating system '${os}'."
-echo "# It was automatically generated from config.charset."
-# List of references, updated during installation:
-echo "# Packages using this file: "
-case "$os" in
- linux-gnulibc1*)
- # Linux libc5 doesn't have nl_langinfo(CODESET); therefore
- # localcharset.c falls back to using the full locale name
- # from the environment variables.
- echo "C ASCII"
- echo "POSIX ASCII"
- for l in af af_ZA ca ca_ES da da_DK de de_AT de_BE de_CH de_DE de_LU \
- en en_AU en_BW en_CA en_DK en_GB en_IE en_NZ en_US en_ZA \
- en_ZW es es_AR es_BO es_CL es_CO es_DO es_EC es_ES es_GT \
- es_HN es_MX es_PA es_PE es_PY es_SV es_US es_UY es_VE et \
- et_EE eu eu_ES fi fi_FI fo fo_FO fr fr_BE fr_CA fr_CH fr_FR \
- fr_LU ga ga_IE gl gl_ES id id_ID in in_ID is is_IS it it_CH \
- it_IT kl kl_GL nl nl_BE nl_NL no no_NO pt pt_BR pt_PT sv \
- sv_FI sv_SE; do
- echo "$l ISO-8859-1"
- echo "$l.iso-8859-1 ISO-8859-1"
- echo "$l.iso-8859-15 ISO-8859-15"
- echo "$l.iso-8859-15@euro ISO-8859-15"
- echo "$l@euro ISO-8859-15"
- echo "$l.cp-437 CP437"
- echo "$l.cp-850 CP850"
- echo "$l.cp-1252 CP1252"
- echo "$l.cp-1252@euro CP1252"
- #echo "$l.atari-st ATARI-ST" # not a commonly used encoding
- echo "$l.utf-8 UTF-8"
- echo "$l.utf-8@euro UTF-8"
- done
- for l in cs cs_CZ hr hr_HR hu hu_HU pl pl_PL ro ro_RO sk sk_SK sl \
- sl_SI sr sr_CS sr_YU; do
- echo "$l ISO-8859-2"
- echo "$l.iso-8859-2 ISO-8859-2"
- echo "$l.cp-852 CP852"
- echo "$l.cp-1250 CP1250"
- echo "$l.utf-8 UTF-8"
- done
- for l in mk mk_MK ru ru_RU; do
- echo "$l ISO-8859-5"
- echo "$l.iso-8859-5 ISO-8859-5"
- echo "$l.koi8-r KOI8-R"
- echo "$l.cp-866 CP866"
- echo "$l.cp-1251 CP1251"
- echo "$l.utf-8 UTF-8"
- done
- for l in ar ar_SA; do
- echo "$l ISO-8859-6"
- echo "$l.iso-8859-6 ISO-8859-6"
- echo "$l.cp-864 CP864"
- #echo "$l.cp-868 CP868" # not a commonly used encoding
- echo "$l.cp-1256 CP1256"
- echo "$l.utf-8 UTF-8"
- done
- for l in el el_GR gr gr_GR; do
- echo "$l ISO-8859-7"
- echo "$l.iso-8859-7 ISO-8859-7"
- echo "$l.cp-869 CP869"
- echo "$l.cp-1253 CP1253"
- echo "$l.cp-1253@euro CP1253"
- echo "$l.utf-8 UTF-8"
- echo "$l.utf-8@euro UTF-8"
- done
- for l in he he_IL iw iw_IL; do
- echo "$l ISO-8859-8"
- echo "$l.iso-8859-8 ISO-8859-8"
- echo "$l.cp-862 CP862"
- echo "$l.cp-1255 CP1255"
- echo "$l.utf-8 UTF-8"
- done
- for l in tr tr_TR; do
- echo "$l ISO-8859-9"
- echo "$l.iso-8859-9 ISO-8859-9"
- echo "$l.cp-857 CP857"
- echo "$l.cp-1254 CP1254"
- echo "$l.utf-8 UTF-8"
- done
- for l in lt lt_LT lv lv_LV; do
- #echo "$l BALTIC" # not a commonly used encoding, wrong encoding name
- echo "$l ISO-8859-13"
- done
- for l in ru_UA uk uk_UA; do
- echo "$l KOI8-U"
- done
- for l in zh zh_CN; do
- #echo "$l GB_2312-80" # not a commonly used encoding, wrong encoding name
- echo "$l GB2312"
- done
- for l in ja ja_JP ja_JP.EUC; do
- echo "$l EUC-JP"
- done
- for l in ko ko_KR; do
- echo "$l EUC-KR"
- done
- for l in th th_TH; do
- echo "$l TIS-620"
- done
- for l in fa fa_IR; do
- #echo "$l ISIRI-3342" # a broken encoding
- echo "$l.utf-8 UTF-8"
- done
- ;;
- linux* | *-gnu*)
- # With glibc-2.1 or newer, we don't need any canonicalization,
- # because glibc has iconv and both glibc and libiconv support all
- # GNU canonical names directly. Therefore, the Makefile does not
- # need to install the alias file at all.
- # The following applies only to glibc-2.0.x and older libcs.
- echo "ISO_646.IRV:1983 ASCII"
- ;;
- aix*)
- echo "ISO8859-1 ISO-8859-1"
- echo "ISO8859-2 ISO-8859-2"
- echo "ISO8859-5 ISO-8859-5"
- echo "ISO8859-6 ISO-8859-6"
- echo "ISO8859-7 ISO-8859-7"
- echo "ISO8859-8 ISO-8859-8"
- echo "ISO8859-9 ISO-8859-9"
- echo "ISO8859-15 ISO-8859-15"
- echo "IBM-850 CP850"
- echo "IBM-856 CP856"
- echo "IBM-921 ISO-8859-13"
- echo "IBM-922 CP922"
- echo "IBM-932 CP932"
- echo "IBM-943 CP943"
- echo "IBM-1046 CP1046"
- echo "IBM-1124 CP1124"
- echo "IBM-1129 CP1129"
- echo "IBM-1252 CP1252"
- echo "IBM-eucCN GB2312"
- echo "IBM-eucJP EUC-JP"
- echo "IBM-eucKR EUC-KR"
- echo "IBM-eucTW EUC-TW"
- echo "big5 BIG5"
- echo "GBK GBK"
- echo "TIS-620 TIS-620"
- echo "UTF-8 UTF-8"
- ;;
- hpux*)
- echo "iso88591 ISO-8859-1"
- echo "iso88592 ISO-8859-2"
- echo "iso88595 ISO-8859-5"
- echo "iso88596 ISO-8859-6"
- echo "iso88597 ISO-8859-7"
- echo "iso88598 ISO-8859-8"
- echo "iso88599 ISO-8859-9"
- echo "iso885915 ISO-8859-15"
- echo "roman8 HP-ROMAN8"
- echo "arabic8 HP-ARABIC8"
- echo "greek8 HP-GREEK8"
- echo "hebrew8 HP-HEBREW8"
- echo "turkish8 HP-TURKISH8"
- echo "kana8 HP-KANA8"
- echo "tis620 TIS-620"
- echo "big5 BIG5"
- echo "eucJP EUC-JP"
- echo "eucKR EUC-KR"
- echo "eucTW EUC-TW"
- echo "hp15CN GB2312"
- #echo "ccdc ?" # what is this?
- echo "SJIS SHIFT_JIS"
- echo "utf8 UTF-8"
- ;;
- irix*)
- echo "ISO8859-1 ISO-8859-1"
- echo "ISO8859-2 ISO-8859-2"
- echo "ISO8859-5 ISO-8859-5"
- echo "ISO8859-7 ISO-8859-7"
- echo "ISO8859-9 ISO-8859-9"
- echo "eucCN GB2312"
- echo "eucJP EUC-JP"
- echo "eucKR EUC-KR"
- echo "eucTW EUC-TW"
- ;;
- osf*)
- echo "ISO8859-1 ISO-8859-1"
- echo "ISO8859-2 ISO-8859-2"
- echo "ISO8859-4 ISO-8859-4"
- echo "ISO8859-5 ISO-8859-5"
- echo "ISO8859-7 ISO-8859-7"
- echo "ISO8859-8 ISO-8859-8"
- echo "ISO8859-9 ISO-8859-9"
- echo "ISO8859-15 ISO-8859-15"
- echo "cp850 CP850"
- echo "big5 BIG5"
- echo "dechanyu DEC-HANYU"
- echo "dechanzi GB2312"
- echo "deckanji DEC-KANJI"
- echo "deckorean EUC-KR"
- echo "eucJP EUC-JP"
- echo "eucKR EUC-KR"
- echo "eucTW EUC-TW"
- echo "GBK GBK"
- echo "KSC5601 CP949"
- echo "sdeckanji EUC-JP"
- echo "SJIS SHIFT_JIS"
- echo "TACTIS TIS-620"
- echo "UTF-8 UTF-8"
- ;;
- solaris*)
- echo "646 ASCII"
- echo "ISO8859-1 ISO-8859-1"
- echo "ISO8859-2 ISO-8859-2"
- echo "ISO8859-3 ISO-8859-3"
- echo "ISO8859-4 ISO-8859-4"
- echo "ISO8859-5 ISO-8859-5"
- echo "ISO8859-6 ISO-8859-6"
- echo "ISO8859-7 ISO-8859-7"
- echo "ISO8859-8 ISO-8859-8"
- echo "ISO8859-9 ISO-8859-9"
- echo "ISO8859-15 ISO-8859-15"
- echo "koi8-r KOI8-R"
- echo "ansi-1251 CP1251"
- echo "BIG5 BIG5"
- echo "Big5-HKSCS BIG5-HKSCS"
- echo "gb2312 GB2312"
- echo "GBK GBK"
- echo "GB18030 GB18030"
- echo "cns11643 EUC-TW"
- echo "5601 EUC-KR"
- echo "ko_KR.johap92 JOHAB"
- echo "eucJP EUC-JP"
- echo "PCK SHIFT_JIS"
- echo "TIS620.2533 TIS-620"
- #echo "sun_eu_greek ?" # what is this?
- echo "UTF-8 UTF-8"
- ;;
- freebsd* | os2*)
- # FreeBSD 4.2 doesn't have nl_langinfo(CODESET); therefore
- # localcharset.c falls back to using the full locale name
- # from the environment variables.
- # Likewise for OS/2. OS/2 has XFree86 just like FreeBSD. Just
- # reuse FreeBSD's locale data for OS/2.
- echo "C ASCII"
- echo "US-ASCII ASCII"
- for l in la_LN lt_LN; do
- echo "$l.ASCII ASCII"
- done
- for l in da_DK de_AT de_CH de_DE en_AU en_CA en_GB en_US es_ES \
- fi_FI fr_BE fr_CA fr_CH fr_FR is_IS it_CH it_IT la_LN \
- lt_LN nl_BE nl_NL no_NO pt_PT sv_SE; do
- echo "$l.ISO_8859-1 ISO-8859-1"
- echo "$l.DIS_8859-15 ISO-8859-15"
- done
- for l in cs_CZ hr_HR hu_HU la_LN lt_LN pl_PL sl_SI; do
- echo "$l.ISO_8859-2 ISO-8859-2"
- done
- for l in la_LN lt_LT; do
- echo "$l.ISO_8859-4 ISO-8859-4"
- done
- for l in ru_RU ru_SU; do
- echo "$l.KOI8-R KOI8-R"
- echo "$l.ISO_8859-5 ISO-8859-5"
- echo "$l.CP866 CP866"
- done
- echo "uk_UA.KOI8-U KOI8-U"
- echo "zh_TW.BIG5 BIG5"
- echo "zh_TW.Big5 BIG5"
- echo "zh_CN.EUC GB2312"
- echo "ja_JP.EUC EUC-JP"
- echo "ja_JP.SJIS SHIFT_JIS"
- echo "ja_JP.Shift_JIS SHIFT_JIS"
- echo "ko_KR.EUC EUC-KR"
- ;;
- netbsd*)
- echo "646 ASCII"
- echo "ISO8859-1 ISO-8859-1"
- echo "ISO8859-2 ISO-8859-2"
- echo "ISO8859-4 ISO-8859-4"
- echo "ISO8859-5 ISO-8859-5"
- echo "ISO8859-7 ISO-8859-7"
- echo "ISO8859-13 ISO-8859-13"
- echo "ISO8859-15 ISO-8859-15"
- echo "eucCN GB2312"
- echo "eucJP EUC-JP"
- echo "eucKR EUC-KR"
- echo "eucTW EUC-TW"
- echo "BIG5 BIG5"
- echo "SJIS SHIFT_JIS"
- ;;
- openbsd*)
- echo "646 ASCII"
- echo "ISO8859-1 ISO-8859-1"
- echo "ISO8859-2 ISO-8859-2"
- echo "ISO8859-4 ISO-8859-4"
- echo "ISO8859-5 ISO-8859-5"
- echo "ISO8859-7 ISO-8859-7"
- echo "ISO8859-13 ISO-8859-13"
- echo "ISO8859-15 ISO-8859-15"
- ;;
- darwin[56]*)
- # Darwin 6.8 doesn't have nl_langinfo(CODESET); therefore
- # localcharset.c falls back to using the full locale name
- # from the environment variables.
- echo "C ASCII"
- for l in en_AU en_CA en_GB en_US la_LN; do
- echo "$l.US-ASCII ASCII"
- done
- for l in da_DK de_AT de_CH de_DE en_AU en_CA en_GB en_US es_ES \
- fi_FI fr_BE fr_CA fr_CH fr_FR is_IS it_CH it_IT nl_BE \
- nl_NL no_NO pt_PT sv_SE; do
- echo "$l ISO-8859-1"
- echo "$l.ISO8859-1 ISO-8859-1"
- echo "$l.ISO8859-15 ISO-8859-15"
- done
- for l in la_LN; do
- echo "$l.ISO8859-1 ISO-8859-1"
- echo "$l.ISO8859-15 ISO-8859-15"
- done
- for l in cs_CZ hr_HR hu_HU la_LN pl_PL sl_SI; do
- echo "$l.ISO8859-2 ISO-8859-2"
- done
- for l in la_LN lt_LT; do
- echo "$l.ISO8859-4 ISO-8859-4"
- done
- for l in ru_RU; do
- echo "$l.KOI8-R KOI8-R"
- echo "$l.ISO8859-5 ISO-8859-5"
- echo "$l.CP866 CP866"
- done
- for l in bg_BG; do
- echo "$l.CP1251 CP1251"
- done
- echo "uk_UA.KOI8-U KOI8-U"
- echo "zh_TW.BIG5 BIG5"
- echo "zh_TW.Big5 BIG5"
- echo "zh_CN.EUC GB2312"
- echo "ja_JP.EUC EUC-JP"
- echo "ja_JP.SJIS SHIFT_JIS"
- echo "ko_KR.EUC EUC-KR"
- ;;
- darwin*)
- # Darwin 7.5 has nl_langinfo(CODESET), but sometimes its value is
- # useless:
- # - It returns the empty string when LANG is set to a locale of the
- # form ll_CC, although ll_CC/LC_CTYPE is a symlink to an UTF-8
- # LC_CTYPE file.
- # - The environment variables LANG, LC_CTYPE, LC_ALL are not set by
- # the system; nl_langinfo(CODESET) returns "US-ASCII" in this case.
- # - The documentation says:
- # "... all code that calls BSD system routines should ensure
- # that the const *char parameters of these routines are in UTF-8
- # encoding. All BSD system functions expect their string
- # parameters to be in UTF-8 encoding and nothing else."
- # It also says
- # "An additional caveat is that string parameters for files,
- # paths, and other file-system entities must be in canonical
- # UTF-8. In a canonical UTF-8 Unicode string, all decomposable
- # characters are decomposed ..."
- # but this is not true: You can pass non-decomposed UTF-8 strings
- # to file system functions, and it is the OS which will convert
- # them to decomposed UTF-8 before accessing the file system.
- # - The Apple Terminal application displays UTF-8 by default.
- # - However, other applications are free to use different encodings:
- # - xterm uses ISO-8859-1 by default.
- # - TextEdit uses MacRoman by default.
- # We prefer UTF-8 over decomposed UTF-8-MAC because one should
- # minimize the use of decomposed Unicode. Unfortunately, through the
- # Darwin file system, decomposed UTF-8 strings are leaked into user
- # space nevertheless.
- # Then there are also the locales with encodings other than US-ASCII
- # and UTF-8. These locales can be occasionally useful to users (e.g.
- # when grepping through ISO-8859-1 encoded text files), when all their
- # file names are in US-ASCII.
- echo "ISO8859-1 ISO-8859-1"
- echo "ISO8859-2 ISO-8859-2"
- echo "ISO8859-4 ISO-8859-4"
- echo "ISO8859-5 ISO-8859-5"
- echo "ISO8859-7 ISO-8859-7"
- echo "ISO8859-9 ISO-8859-9"
- echo "ISO8859-13 ISO-8859-13"
- echo "ISO8859-15 ISO-8859-15"
- echo "KOI8-R KOI8-R"
- echo "KOI8-U KOI8-U"
- echo "CP866 CP866"
- echo "CP949 CP949"
- echo "CP1131 CP1131"
- echo "CP1251 CP1251"
- echo "eucCN GB2312"
- echo "GB2312 GB2312"
- echo "eucJP EUC-JP"
- echo "eucKR EUC-KR"
- echo "Big5 BIG5"
- echo "Big5HKSCS BIG5-HKSCS"
- echo "GBK GBK"
- echo "GB18030 GB18030"
- echo "SJIS SHIFT_JIS"
- echo "ARMSCII-8 ARMSCII-8"
- echo "PT154 PT154"
- #echo "ISCII-DEV ?"
- echo "* UTF-8"
- ;;
- beos* | haiku*)
- # BeOS and Haiku have a single locale, and it has UTF-8 encoding.
- echo "* UTF-8"
- ;;
- msdosdjgpp*)
- # DJGPP 2.03 doesn't have nl_langinfo(CODESET); therefore
- # localcharset.c falls back to using the full locale name
- # from the environment variables.
- echo "#"
- echo "# The encodings given here may not all be correct."
- echo "# If you find that the encoding given for your language and"
- echo "# country is not the one your DOS machine actually uses, just"
- echo "# correct it in this file, and send a mail to"
- echo "# Juan Manuel Guerrero <juan.guerrero@gmx.de>"
- echo "# and Bruno Haible <bruno@clisp.org>."
- echo "#"
- echo "C ASCII"
- # ISO-8859-1 languages
- echo "ca CP850"
- echo "ca_ES CP850"
- echo "da CP865" # not CP850 ??
- echo "da_DK CP865" # not CP850 ??
- echo "de CP850"
- echo "de_AT CP850"
- echo "de_CH CP850"
- echo "de_DE CP850"
- echo "en CP850"
- echo "en_AU CP850" # not CP437 ??
- echo "en_CA CP850"
- echo "en_GB CP850"
- echo "en_NZ CP437"
- echo "en_US CP437"
- echo "en_ZA CP850" # not CP437 ??
- echo "es CP850"
- echo "es_AR CP850"
- echo "es_BO CP850"
- echo "es_CL CP850"
- echo "es_CO CP850"
- echo "es_CR CP850"
- echo "es_CU CP850"
- echo "es_DO CP850"
- echo "es_EC CP850"
- echo "es_ES CP850"
- echo "es_GT CP850"
- echo "es_HN CP850"
- echo "es_MX CP850"
- echo "es_NI CP850"
- echo "es_PA CP850"
- echo "es_PY CP850"
- echo "es_PE CP850"
- echo "es_SV CP850"
- echo "es_UY CP850"
- echo "es_VE CP850"
- echo "et CP850"
- echo "et_EE CP850"
- echo "eu CP850"
- echo "eu_ES CP850"
- echo "fi CP850"
- echo "fi_FI CP850"
- echo "fr CP850"
- echo "fr_BE CP850"
- echo "fr_CA CP850"
- echo "fr_CH CP850"
- echo "fr_FR CP850"
- echo "ga CP850"
- echo "ga_IE CP850"
- echo "gd CP850"
- echo "gd_GB CP850"
- echo "gl CP850"
- echo "gl_ES CP850"
- echo "id CP850" # not CP437 ??
- echo "id_ID CP850" # not CP437 ??
- echo "is CP861" # not CP850 ??
- echo "is_IS CP861" # not CP850 ??
- echo "it CP850"
- echo "it_CH CP850"
- echo "it_IT CP850"
- echo "lt CP775"
- echo "lt_LT CP775"
- echo "lv CP775"
- echo "lv_LV CP775"
- echo "nb CP865" # not CP850 ??
- echo "nb_NO CP865" # not CP850 ??
- echo "nl CP850"
- echo "nl_BE CP850"
- echo "nl_NL CP850"
- echo "nn CP865" # not CP850 ??
- echo "nn_NO CP865" # not CP850 ??
- echo "no CP865" # not CP850 ??
- echo "no_NO CP865" # not CP850 ??
- echo "pt CP850"
- echo "pt_BR CP850"
- echo "pt_PT CP850"
- echo "sv CP850"
- echo "sv_SE CP850"
- # ISO-8859-2 languages
- echo "cs CP852"
- echo "cs_CZ CP852"
- echo "hr CP852"
- echo "hr_HR CP852"
- echo "hu CP852"
- echo "hu_HU CP852"
- echo "pl CP852"
- echo "pl_PL CP852"
- echo "ro CP852"
- echo "ro_RO CP852"
- echo "sk CP852"
- echo "sk_SK CP852"
- echo "sl CP852"
- echo "sl_SI CP852"
- echo "sq CP852"
- echo "sq_AL CP852"
- echo "sr CP852" # CP852 or CP866 or CP855 ??
- echo "sr_CS CP852" # CP852 or CP866 or CP855 ??
- echo "sr_YU CP852" # CP852 or CP866 or CP855 ??
- # ISO-8859-3 languages
- echo "mt CP850"
- echo "mt_MT CP850"
- # ISO-8859-5 languages
- echo "be CP866"
- echo "be_BE CP866"
- echo "bg CP866" # not CP855 ??
- echo "bg_BG CP866" # not CP855 ??
- echo "mk CP866" # not CP855 ??
- echo "mk_MK CP866" # not CP855 ??
- echo "ru CP866"
- echo "ru_RU CP866"
- echo "uk CP1125"
- echo "uk_UA CP1125"
- # ISO-8859-6 languages
- echo "ar CP864"
- echo "ar_AE CP864"
- echo "ar_DZ CP864"
- echo "ar_EG CP864"
- echo "ar_IQ CP864"
- echo "ar_IR CP864"
- echo "ar_JO CP864"
- echo "ar_KW CP864"
- echo "ar_MA CP864"
- echo "ar_OM CP864"
- echo "ar_QA CP864"
- echo "ar_SA CP864"
- echo "ar_SY CP864"
- # ISO-8859-7 languages
- echo "el CP869"
- echo "el_GR CP869"
- # ISO-8859-8 languages
- echo "he CP862"
- echo "he_IL CP862"
- # ISO-8859-9 languages
- echo "tr CP857"
- echo "tr_TR CP857"
- # Japanese
- echo "ja CP932"
- echo "ja_JP CP932"
- # Chinese
- echo "zh_CN GBK"
- echo "zh_TW CP950" # not CP938 ??
- # Korean
- echo "kr CP949" # not CP934 ??
- echo "kr_KR CP949" # not CP934 ??
- # Thai
- echo "th CP874"
- echo "th_TH CP874"
- # Other
- echo "eo CP850"
- echo "eo_EO CP850"
- ;;
-esac
+++ /dev/null
-/* A POSIX-like <errno.h>.
-
- Copyright (C) 2008-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _@GUARD_PREFIX@_ERRNO_H
-
-#if __GNUC__ >= 3
-@PRAGMA_SYSTEM_HEADER@
-#endif
-@PRAGMA_COLUMNS@
-
-/* The include_next requires a split double-inclusion guard. */
-#@INCLUDE_NEXT@ @NEXT_ERRNO_H@
-
-#ifndef _@GUARD_PREFIX@_ERRNO_H
-#define _@GUARD_PREFIX@_ERRNO_H
-
-
-/* On native Windows platforms, many macros are not defined. */
-# if (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
-
-/* These are the same values as defined by MSVC 10, for interoperability. */
-
-# ifndef ENOMSG
-# define ENOMSG 122
-# define GNULIB_defined_ENOMSG 1
-# endif
-
-# ifndef EIDRM
-# define EIDRM 111
-# define GNULIB_defined_EIDRM 1
-# endif
-
-# ifndef ENOLINK
-# define ENOLINK 121
-# define GNULIB_defined_ENOLINK 1
-# endif
-
-# ifndef EPROTO
-# define EPROTO 134
-# define GNULIB_defined_EPROTO 1
-# endif
-
-# ifndef EBADMSG
-# define EBADMSG 104
-# define GNULIB_defined_EBADMSG 1
-# endif
-
-# ifndef EOVERFLOW
-# define EOVERFLOW 132
-# define GNULIB_defined_EOVERFLOW 1
-# endif
-
-# ifndef ENOTSUP
-# define ENOTSUP 129
-# define GNULIB_defined_ENOTSUP 1
-# endif
-
-# ifndef ENETRESET
-# define ENETRESET 117
-# define GNULIB_defined_ENETRESET 1
-# endif
-
-# ifndef ECONNABORTED
-# define ECONNABORTED 106
-# define GNULIB_defined_ECONNABORTED 1
-# endif
-
-# ifndef ECANCELED
-# define ECANCELED 105
-# define GNULIB_defined_ECANCELED 1
-# endif
-
-# ifndef EINPROGRESS
-# define EINPROGRESS 112
-# define EALREADY 103
-# define ENOTSOCK 128
-# define EDESTADDRREQ 109
-# define EMSGSIZE 115
-# define EPROTOTYPE 136
-# define ENOPROTOOPT 123
-# define EPROTONOSUPPORT 135
-# define EOPNOTSUPP 130
-# define EAFNOSUPPORT 102
-# define EADDRINUSE 100
-# define EADDRNOTAVAIL 101
-# define ENETDOWN 116
-# define ENETUNREACH 118
-# define ECONNRESET 108
-# define ENOBUFS 119
-# define EISCONN 113
-# define ENOTCONN 126
-# define ETIMEDOUT 138
-# define ECONNREFUSED 107
-# define ELOOP 114
-# define EHOSTUNREACH 110
-# define EWOULDBLOCK 140
-# define ETXTBSY 139
-# define ENODATA 120 /* not required by POSIX */
-# define ENOSR 124 /* not required by POSIX */
-# define ENOSTR 125 /* not required by POSIX */
-# define ENOTRECOVERABLE 127 /* not required by POSIX */
-# define EOWNERDEAD 133 /* not required by POSIX */
-# define ETIME 137 /* not required by POSIX */
-# define EOTHER 131 /* not required by POSIX */
-# define GNULIB_defined_ESOCK 1
-# endif
-
-/* These are intentionally the same values as the WSA* error numbers, defined
- in <winsock2.h>. */
-# define ESOCKTNOSUPPORT 10044 /* not required by POSIX */
-# define EPFNOSUPPORT 10046 /* not required by POSIX */
-# define ESHUTDOWN 10058 /* not required by POSIX */
-# define ETOOMANYREFS 10059 /* not required by POSIX */
-# define EHOSTDOWN 10064 /* not required by POSIX */
-# define EPROCLIM 10067 /* not required by POSIX */
-# define EUSERS 10068 /* not required by POSIX */
-# define EDQUOT 10069
-# define ESTALE 10070
-# define EREMOTE 10071 /* not required by POSIX */
-# define GNULIB_defined_EWINSOCK 1
-
-# endif
-
-
-/* On OSF/1 5.1, when _XOPEN_SOURCE_EXTENDED is not defined, the macros
- EMULTIHOP, ENOLINK, EOVERFLOW are not defined. */
-# if @EMULTIHOP_HIDDEN@
-# define EMULTIHOP @EMULTIHOP_VALUE@
-# define GNULIB_defined_EMULTIHOP 1
-# endif
-# if @ENOLINK_HIDDEN@
-# define ENOLINK @ENOLINK_VALUE@
-# define GNULIB_defined_ENOLINK 1
-# endif
-# if @EOVERFLOW_HIDDEN@
-# define EOVERFLOW @EOVERFLOW_VALUE@
-# define GNULIB_defined_EOVERFLOW 1
-# endif
-
-
-/* On OpenBSD 4.0 and on native Windows, the macros ENOMSG, EIDRM, ENOLINK,
- EPROTO, EMULTIHOP, EBADMSG, EOVERFLOW, ENOTSUP, ECANCELED are not defined.
- Likewise, on NonStop Kernel, EDQUOT is not defined.
- Define them here. Values >= 2000 seem safe to use: Solaris ESTALE = 151,
- HP-UX EWOULDBLOCK = 246, IRIX EDQUOT = 1133.
-
- Note: When one of these systems defines some of these macros some day,
- binaries will have to be recompiled so that they recognizes the new
- errno values from the system. */
-
-# ifndef ENOMSG
-# define ENOMSG 2000
-# define GNULIB_defined_ENOMSG 1
-# endif
-
-# ifndef EIDRM
-# define EIDRM 2001
-# define GNULIB_defined_EIDRM 1
-# endif
-
-# ifndef ENOLINK
-# define ENOLINK 2002
-# define GNULIB_defined_ENOLINK 1
-# endif
-
-# ifndef EPROTO
-# define EPROTO 2003
-# define GNULIB_defined_EPROTO 1
-# endif
-
-# ifndef EMULTIHOP
-# define EMULTIHOP 2004
-# define GNULIB_defined_EMULTIHOP 1
-# endif
-
-# ifndef EBADMSG
-# define EBADMSG 2005
-# define GNULIB_defined_EBADMSG 1
-# endif
-
-# ifndef EOVERFLOW
-# define EOVERFLOW 2006
-# define GNULIB_defined_EOVERFLOW 1
-# endif
-
-# ifndef ENOTSUP
-# define ENOTSUP 2007
-# define GNULIB_defined_ENOTSUP 1
-# endif
-
-# ifndef ENETRESET
-# define ENETRESET 2011
-# define GNULIB_defined_ENETRESET 1
-# endif
-
-# ifndef ECONNABORTED
-# define ECONNABORTED 2012
-# define GNULIB_defined_ECONNABORTED 1
-# endif
-
-# ifndef ESTALE
-# define ESTALE 2009
-# define GNULIB_defined_ESTALE 1
-# endif
-
-# ifndef EDQUOT
-# define EDQUOT 2010
-# define GNULIB_defined_EDQUOT 1
-# endif
-
-# ifndef ECANCELED
-# define ECANCELED 2008
-# define GNULIB_defined_ECANCELED 1
-# endif
-
-
-#endif /* _@GUARD_PREFIX@_ERRNO_H */
-#endif /* _@GUARD_PREFIX@_ERRNO_H */
+++ /dev/null
-/* Error handler for noninteractive utilities
- Copyright (C) 1990-1998, 2000-2007, 2009-2012 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by David MacKenzie <djm@gnu.ai.mit.edu>. */
-
-#if !_LIBC
-# include <config.h>
-#endif
-
-#include "error.h"
-
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#if !_LIBC && ENABLE_NLS
-# include "gettext.h"
-# define _(msgid) gettext (msgid)
-#endif
-
-#ifdef _LIBC
-# include <libintl.h>
-# include <stdbool.h>
-# include <stdint.h>
-# include <wchar.h>
-# define mbsrtowcs __mbsrtowcs
-#endif
-
-#if USE_UNLOCKED_IO
-# include "unlocked-io.h"
-#endif
-
-#ifndef _
-# define _(String) String
-#endif
-
-/* If NULL, error will flush stdout, then print on stderr the program
- name, a colon and a space. Otherwise, error will call this
- function without parameters instead. */
-void (*error_print_progname) (void);
-
-/* This variable is incremented each time 'error' is called. */
-unsigned int error_message_count;
-
-#ifdef _LIBC
-/* In the GNU C library, there is a predefined variable for this. */
-
-# define program_name program_invocation_name
-# include <errno.h>
-# include <limits.h>
-# include <libio/libioP.h>
-
-/* In GNU libc we want do not want to use the common name 'error' directly.
- Instead make it a weak alias. */
-extern void __error (int status, int errnum, const char *message, ...)
- __attribute__ ((__format__ (__printf__, 3, 4)));
-extern void __error_at_line (int status, int errnum, const char *file_name,
- unsigned int line_number, const char *message,
- ...)
- __attribute__ ((__format__ (__printf__, 5, 6)));;
-# define error __error
-# define error_at_line __error_at_line
-
-# include <libio/iolibio.h>
-# define fflush(s) INTUSE(_IO_fflush) (s)
-# undef putc
-# define putc(c, fp) INTUSE(_IO_putc) (c, fp)
-
-# include <bits/libc-lock.h>
-
-#else /* not _LIBC */
-
-# include <fcntl.h>
-# include <unistd.h>
-
-# if (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
-/* Get declarations of the native Windows API functions. */
-# define WIN32_LEAN_AND_MEAN
-# include <windows.h>
-/* Get _get_osfhandle. */
-# include "msvc-nothrow.h"
-# endif
-
-/* The gnulib override of fcntl is not needed in this file. */
-# undef fcntl
-
-# if !HAVE_DECL_STRERROR_R
-# ifndef HAVE_DECL_STRERROR_R
-"this configure-time declaration test was not run"
-# endif
-# if STRERROR_R_CHAR_P
-char *strerror_r ();
-# else
-int strerror_r ();
-# endif
-# endif
-
-/* The calling program should define program_name and set it to the
- name of the executing program. */
-extern char *program_name;
-
-# if HAVE_STRERROR_R || defined strerror_r
-# define __strerror_r strerror_r
-# endif /* HAVE_STRERROR_R || defined strerror_r */
-#endif /* not _LIBC */
-
-#if !_LIBC
-/* Return non-zero if FD is open. */
-static inline int
-is_open (int fd)
-{
-# if (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
- /* On native Windows: The initial state of unassigned standard file
- descriptors is that they are open but point to an INVALID_HANDLE_VALUE.
- There is no fcntl, and the gnulib replacement fcntl does not support
- F_GETFL. */
- return (HANDLE) _get_osfhandle (fd) != INVALID_HANDLE_VALUE;
-# else
-# ifndef F_GETFL
-# error Please port fcntl to your platform
-# endif
- return 0 <= fcntl (fd, F_GETFL);
-# endif
-}
-#endif
-
-static inline void
-flush_stdout (void)
-{
-#if !_LIBC
- int stdout_fd;
-
-# if GNULIB_FREOPEN_SAFER
- /* Use of gnulib's freopen-safer module normally ensures that
- fileno (stdout) == 1
- whenever stdout is open. */
- stdout_fd = STDOUT_FILENO;
-# else
- /* POSIX states that fileno (stdout) after fclose is unspecified. But in
- practice it is not a problem, because stdout is statically allocated and
- the fd of a FILE stream is stored as a field in its allocated memory. */
- stdout_fd = fileno (stdout);
-# endif
- /* POSIX states that fflush (stdout) after fclose is unspecified; it
- is safe in glibc, but not on all other platforms. fflush (NULL)
- is always defined, but too draconian. */
- if (0 <= stdout_fd && is_open (stdout_fd))
-#endif
- fflush (stdout);
-}
-
-static void
-print_errno_message (int errnum)
-{
- char const *s;
-
-#if defined HAVE_STRERROR_R || _LIBC
- char errbuf[1024];
-# if STRERROR_R_CHAR_P || _LIBC
- s = __strerror_r (errnum, errbuf, sizeof errbuf);
-# else
- if (__strerror_r (errnum, errbuf, sizeof errbuf) == 0)
- s = errbuf;
- else
- s = 0;
-# endif
-#else
- s = strerror (errnum);
-#endif
-
-#if !_LIBC
- if (! s)
- s = _("Unknown system error");
-#endif
-
-#if _LIBC
- __fxprintf (NULL, ": %s", s);
-#else
- fprintf (stderr, ": %s", s);
-#endif
-}
-
-static void
-error_tail (int status, int errnum, const char *message, va_list args)
-{
-#if _LIBC
- if (_IO_fwide (stderr, 0) > 0)
- {
-# define ALLOCA_LIMIT 2000
- size_t len = strlen (message) + 1;
- wchar_t *wmessage = NULL;
- mbstate_t st;
- size_t res;
- const char *tmp;
- bool use_malloc = false;
-
- while (1)
- {
- if (__libc_use_alloca (len * sizeof (wchar_t)))
- wmessage = (wchar_t *) alloca (len * sizeof (wchar_t));
- else
- {
- if (!use_malloc)
- wmessage = NULL;
-
- wchar_t *p = (wchar_t *) realloc (wmessage,
- len * sizeof (wchar_t));
- if (p == NULL)
- {
- free (wmessage);
- fputws_unlocked (L"out of memory\n", stderr);
- return;
- }
- wmessage = p;
- use_malloc = true;
- }
-
- memset (&st, '\0', sizeof (st));
- tmp = message;
-
- res = mbsrtowcs (wmessage, &tmp, len, &st);
- if (res != len)
- break;
-
- if (__builtin_expect (len >= SIZE_MAX / 2, 0))
- {
- /* This really should not happen if everything is fine. */
- res = (size_t) -1;
- break;
- }
-
- len *= 2;
- }
-
- if (res == (size_t) -1)
- {
- /* The string cannot be converted. */
- if (use_malloc)
- {
- free (wmessage);
- use_malloc = false;
- }
- wmessage = (wchar_t *) L"???";
- }
-
- __vfwprintf (stderr, wmessage, args);
-
- if (use_malloc)
- free (wmessage);
- }
- else
-#endif
- vfprintf (stderr, message, args);
- va_end (args);
-
- ++error_message_count;
- if (errnum)
- print_errno_message (errnum);
-#if _LIBC
- __fxprintf (NULL, "\n");
-#else
- putc ('\n', stderr);
-#endif
- fflush (stderr);
- if (status)
- exit (status);
-}
-
-
-/* Print the program name and error message MESSAGE, which is a printf-style
- format string with optional args.
- If ERRNUM is nonzero, print its corresponding system error message.
- Exit with status STATUS if it is nonzero. */
-void
-error (int status, int errnum, const char *message, ...)
-{
- va_list args;
-
-#if defined _LIBC && defined __libc_ptf_call
- /* We do not want this call to be cut short by a thread
- cancellation. Therefore disable cancellation for now. */
- int state = PTHREAD_CANCEL_ENABLE;
- __libc_ptf_call (pthread_setcancelstate, (PTHREAD_CANCEL_DISABLE, &state),
- 0);
-#endif
-
- flush_stdout ();
-#ifdef _LIBC
- _IO_flockfile (stderr);
-#endif
- if (error_print_progname)
- (*error_print_progname) ();
- else
- {
-#if _LIBC
- __fxprintf (NULL, "%s: ", program_name);
-#else
- fprintf (stderr, "%s: ", program_name);
-#endif
- }
-
- va_start (args, message);
- error_tail (status, errnum, message, args);
-
-#ifdef _LIBC
- _IO_funlockfile (stderr);
-# ifdef __libc_ptf_call
- __libc_ptf_call (pthread_setcancelstate, (state, NULL), 0);
-# endif
-#endif
-}
-\f
-/* Sometimes we want to have at most one error per line. This
- variable controls whether this mode is selected or not. */
-int error_one_per_line;
-
-void
-error_at_line (int status, int errnum, const char *file_name,
- unsigned int line_number, const char *message, ...)
-{
- va_list args;
-
- if (error_one_per_line)
- {
- static const char *old_file_name;
- static unsigned int old_line_number;
-
- if (old_line_number == line_number
- && (file_name == old_file_name
- || strcmp (old_file_name, file_name) == 0))
- /* Simply return and print nothing. */
- return;
-
- old_file_name = file_name;
- old_line_number = line_number;
- }
-
-#if defined _LIBC && defined __libc_ptf_call
- /* We do not want this call to be cut short by a thread
- cancellation. Therefore disable cancellation for now. */
- int state = PTHREAD_CANCEL_ENABLE;
- __libc_ptf_call (pthread_setcancelstate, (PTHREAD_CANCEL_DISABLE, &state),
- 0);
-#endif
-
- flush_stdout ();
-#ifdef _LIBC
- _IO_flockfile (stderr);
-#endif
- if (error_print_progname)
- (*error_print_progname) ();
- else
- {
-#if _LIBC
- __fxprintf (NULL, "%s:", program_name);
-#else
- fprintf (stderr, "%s:", program_name);
-#endif
- }
-
-#if _LIBC
- __fxprintf (NULL, file_name != NULL ? "%s:%d: " : " ",
- file_name, line_number);
-#else
- fprintf (stderr, file_name != NULL ? "%s:%d: " : " ",
- file_name, line_number);
-#endif
-
- va_start (args, message);
- error_tail (status, errnum, message, args);
-
-#ifdef _LIBC
- _IO_funlockfile (stderr);
-# ifdef __libc_ptf_call
- __libc_ptf_call (pthread_setcancelstate, (state, NULL), 0);
-# endif
-#endif
-}
-
-#ifdef _LIBC
-/* Make the weak alias. */
-# undef error
-# undef error_at_line
-weak_alias (__error, error)
-weak_alias (__error_at_line, error_at_line)
-#endif
+++ /dev/null
-/* Declaration for error-reporting function
- Copyright (C) 1995-1997, 2003, 2006, 2008-2012 Free Software Foundation,
- Inc.
- This file is part of the GNU C Library.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _ERROR_H
-#define _ERROR_H 1
-
-/* The __attribute__ feature is available in gcc versions 2.5 and later.
- The __-protected variants of the attributes 'format' and 'printf' are
- accepted by gcc versions 2.6.4 (effectively 2.7) and later.
- We enable _GL_ATTRIBUTE_FORMAT only if these are supported too, because
- gnulib and libintl do '#define printf __printf__' when they override
- the 'printf' function. */
-#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7)
-# define _GL_ATTRIBUTE_FORMAT(spec) __attribute__ ((__format__ spec))
-#else
-# define _GL_ATTRIBUTE_FORMAT(spec) /* empty */
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Print a message with 'fprintf (stderr, FORMAT, ...)';
- if ERRNUM is nonzero, follow it with ": " and strerror (ERRNUM).
- If STATUS is nonzero, terminate the program with 'exit (STATUS)'. */
-
-extern void error (int __status, int __errnum, const char *__format, ...)
- _GL_ATTRIBUTE_FORMAT ((__printf__, 3, 4));
-
-extern void error_at_line (int __status, int __errnum, const char *__fname,
- unsigned int __lineno, const char *__format, ...)
- _GL_ATTRIBUTE_FORMAT ((__printf__, 5, 6));
-
-/* If NULL, error will flush stdout, then print on stderr the program
- name, a colon and a space. Otherwise, error will call this
- function without parameters instead. */
-extern void (*error_print_progname) (void);
-
-/* This variable is incremented each time 'error' is called. */
-extern unsigned int error_message_count;
-
-/* Sometimes we want to have at most one error per line. This
- variable controls whether this mode is selected or not. */
-extern int error_one_per_line;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* error.h */
+++ /dev/null
-/* Failure exit status
-
- Copyright (C) 2002-2003, 2005-2007, 2009-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-#include "exitfail.h"
-
-#include <stdlib.h>
-
-int volatile exit_failure = EXIT_FAILURE;
+++ /dev/null
-/* Failure exit status
-
- Copyright (C) 2002, 2009-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-extern int volatile exit_failure;
+++ /dev/null
-/* fpending.c -- return the number of pending output bytes on a stream
- Copyright (C) 2000, 2004, 2006-2007, 2009-2012 Free Software Foundation,
- Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Jim Meyering. */
-
-#include <config.h>
-
-#include "fpending.h"
-
-/* Return the number of pending (aka buffered, unflushed)
- bytes on the stream, FP, that is open for writing. */
-size_t
-__fpending (FILE *fp)
-{
- return PENDING_OUTPUT_N_BYTES;
-}
+++ /dev/null
-/* Declare __fpending.
-
- Copyright (C) 2000, 2003, 2005-2006, 2009-2012 Free Software Foundation,
- Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-
- Written by Jim Meyering. */
-
-#include <stddef.h>
-#include <stdio.h>
-
-#ifndef HAVE_DECL___FPENDING
-"this configure-time declaration test was not run"
-#endif
-
-#if HAVE_DECL___FPENDING
-# if HAVE_STDIO_EXT_H
-# include <stdio_ext.h>
-# endif
-#else
-size_t __fpending (FILE *);
-#endif
+++ /dev/null
-/* Getopt for GNU.
- NOTE: getopt is part of the C library, so if you don't know what
- "Keep this file name-space clean" means, talk to drepper@gnu.org
- before changing it!
- Copyright (C) 1987-1996, 1998-2004, 2006, 2008-2012 Free Software
- Foundation, Inc.
- This file is part of the GNU C Library.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-\f
-#ifndef _LIBC
-# include <config.h>
-#endif
-
-#include "getopt.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#ifdef _LIBC
-# include <libintl.h>
-#else
-# include "gettext.h"
-# define _(msgid) gettext (msgid)
-#endif
-
-#if defined _LIBC && defined USE_IN_LIBIO
-# include <wchar.h>
-#endif
-
-/* This version of 'getopt' appears to the caller like standard Unix 'getopt'
- but it behaves differently for the user, since it allows the user
- to intersperse the options with the other arguments.
-
- As 'getopt_long' works, it permutes the elements of ARGV so that,
- when it is done, all the options precede everything else. Thus
- all application programs are extended to handle flexible argument order.
-
- Using 'getopt' or setting the environment variable POSIXLY_CORRECT
- disables permutation.
- Then the behavior is completely standard.
-
- GNU application programs can use a third alternative mode in which
- they can distinguish the relative order of options and other arguments. */
-
-#include "getopt_int.h"
-
-/* For communication from 'getopt' to the caller.
- When 'getopt' finds an option that takes an argument,
- the argument value is returned here.
- Also, when 'ordering' is RETURN_IN_ORDER,
- each non-option ARGV-element is returned here. */
-
-char *optarg;
-
-/* Index in ARGV of the next element to be scanned.
- This is used for communication to and from the caller
- and for communication between successive calls to 'getopt'.
-
- On entry to 'getopt', zero means this is the first call; initialize.
-
- When 'getopt' returns -1, this is the index of the first of the
- non-option elements that the caller should itself scan.
-
- Otherwise, 'optind' communicates from one call to the next
- how much of ARGV has been scanned so far. */
-
-/* 1003.2 says this must be 1 before any call. */
-int optind = 1;
-
-/* Callers store zero here to inhibit the error message
- for unrecognized options. */
-
-int opterr = 1;
-
-/* Set to an option character which was unrecognized.
- This must be initialized on some systems to avoid linking in the
- system's own getopt implementation. */
-
-int optopt = '?';
-
-/* Keep a global copy of all internal members of getopt_data. */
-
-static struct _getopt_data getopt_data;
-
-\f
-#if defined HAVE_DECL_GETENV && !HAVE_DECL_GETENV
-extern char *getenv ();
-#endif
-\f
-#ifdef _LIBC
-/* Stored original parameters.
- XXX This is no good solution. We should rather copy the args so
- that we can compare them later. But we must not use malloc(3). */
-extern int __libc_argc;
-extern char **__libc_argv;
-
-/* Bash 2.0 gives us an environment variable containing flags
- indicating ARGV elements that should not be considered arguments. */
-
-# ifdef USE_NONOPTION_FLAGS
-/* Defined in getopt_init.c */
-extern char *__getopt_nonoption_flags;
-# endif
-
-# ifdef USE_NONOPTION_FLAGS
-# define SWAP_FLAGS(ch1, ch2) \
- if (d->__nonoption_flags_len > 0) \
- { \
- char __tmp = __getopt_nonoption_flags[ch1]; \
- __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2]; \
- __getopt_nonoption_flags[ch2] = __tmp; \
- }
-# else
-# define SWAP_FLAGS(ch1, ch2)
-# endif
-#else /* !_LIBC */
-# define SWAP_FLAGS(ch1, ch2)
-#endif /* _LIBC */
-
-/* Exchange two adjacent subsequences of ARGV.
- One subsequence is elements [first_nonopt,last_nonopt)
- which contains all the non-options that have been skipped so far.
- The other is elements [last_nonopt,optind), which contains all
- the options processed since those non-options were skipped.
-
- 'first_nonopt' and 'last_nonopt' are relocated so that they describe
- the new indices of the non-options in ARGV after they are moved. */
-
-static void
-exchange (char **argv, struct _getopt_data *d)
-{
- int bottom = d->__first_nonopt;
- int middle = d->__last_nonopt;
- int top = d->optind;
- char *tem;
-
- /* Exchange the shorter segment with the far end of the longer segment.
- That puts the shorter segment into the right place.
- It leaves the longer segment in the right place overall,
- but it consists of two parts that need to be swapped next. */
-
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
- /* First make sure the handling of the '__getopt_nonoption_flags'
- string can work normally. Our top argument must be in the range
- of the string. */
- if (d->__nonoption_flags_len > 0 && top >= d->__nonoption_flags_max_len)
- {
- /* We must extend the array. The user plays games with us and
- presents new arguments. */
- char *new_str = malloc (top + 1);
- if (new_str == NULL)
- d->__nonoption_flags_len = d->__nonoption_flags_max_len = 0;
- else
- {
- memset (__mempcpy (new_str, __getopt_nonoption_flags,
- d->__nonoption_flags_max_len),
- '\0', top + 1 - d->__nonoption_flags_max_len);
- d->__nonoption_flags_max_len = top + 1;
- __getopt_nonoption_flags = new_str;
- }
- }
-#endif
-
- while (top > middle && middle > bottom)
- {
- if (top - middle > middle - bottom)
- {
- /* Bottom segment is the short one. */
- int len = middle - bottom;
- register int i;
-
- /* Swap it with the top part of the top segment. */
- for (i = 0; i < len; i++)
- {
- tem = argv[bottom + i];
- argv[bottom + i] = argv[top - (middle - bottom) + i];
- argv[top - (middle - bottom) + i] = tem;
- SWAP_FLAGS (bottom + i, top - (middle - bottom) + i);
- }
- /* Exclude the moved bottom segment from further swapping. */
- top -= len;
- }
- else
- {
- /* Top segment is the short one. */
- int len = top - middle;
- register int i;
-
- /* Swap it with the bottom part of the bottom segment. */
- for (i = 0; i < len; i++)
- {
- tem = argv[bottom + i];
- argv[bottom + i] = argv[middle + i];
- argv[middle + i] = tem;
- SWAP_FLAGS (bottom + i, middle + i);
- }
- /* Exclude the moved top segment from further swapping. */
- bottom += len;
- }
- }
-
- /* Update records for the slots the non-options now occupy. */
-
- d->__first_nonopt += (d->optind - d->__last_nonopt);
- d->__last_nonopt = d->optind;
-}
-
-/* Initialize the internal data when the first call is made. */
-
-static const char *
-_getopt_initialize (int argc _GL_UNUSED,
- char **argv _GL_UNUSED, const char *optstring,
- struct _getopt_data *d, int posixly_correct)
-{
- /* Start processing options with ARGV-element 1 (since ARGV-element 0
- is the program name); the sequence of previously skipped
- non-option ARGV-elements is empty. */
-
- d->__first_nonopt = d->__last_nonopt = d->optind;
-
- d->__nextchar = NULL;
-
- d->__posixly_correct = posixly_correct || !!getenv ("POSIXLY_CORRECT");
-
- /* Determine how to handle the ordering of options and nonoptions. */
-
- if (optstring[0] == '-')
- {
- d->__ordering = RETURN_IN_ORDER;
- ++optstring;
- }
- else if (optstring[0] == '+')
- {
- d->__ordering = REQUIRE_ORDER;
- ++optstring;
- }
- else if (d->__posixly_correct)
- d->__ordering = REQUIRE_ORDER;
- else
- d->__ordering = PERMUTE;
-
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
- if (!d->__posixly_correct
- && argc == __libc_argc && argv == __libc_argv)
- {
- if (d->__nonoption_flags_max_len == 0)
- {
- if (__getopt_nonoption_flags == NULL
- || __getopt_nonoption_flags[0] == '\0')
- d->__nonoption_flags_max_len = -1;
- else
- {
- const char *orig_str = __getopt_nonoption_flags;
- int len = d->__nonoption_flags_max_len = strlen (orig_str);
- if (d->__nonoption_flags_max_len < argc)
- d->__nonoption_flags_max_len = argc;
- __getopt_nonoption_flags =
- (char *) malloc (d->__nonoption_flags_max_len);
- if (__getopt_nonoption_flags == NULL)
- d->__nonoption_flags_max_len = -1;
- else
- memset (__mempcpy (__getopt_nonoption_flags, orig_str, len),
- '\0', d->__nonoption_flags_max_len - len);
- }
- }
- d->__nonoption_flags_len = d->__nonoption_flags_max_len;
- }
- else
- d->__nonoption_flags_len = 0;
-#endif
-
- return optstring;
-}
-\f
-/* Scan elements of ARGV (whose length is ARGC) for option characters
- given in OPTSTRING.
-
- If an element of ARGV starts with '-', and is not exactly "-" or "--",
- then it is an option element. The characters of this element
- (aside from the initial '-') are option characters. If 'getopt'
- is called repeatedly, it returns successively each of the option characters
- from each of the option elements.
-
- If 'getopt' finds another option character, it returns that character,
- updating 'optind' and 'nextchar' so that the next call to 'getopt' can
- resume the scan with the following option character or ARGV-element.
-
- If there are no more option characters, 'getopt' returns -1.
- Then 'optind' is the index in ARGV of the first ARGV-element
- that is not an option. (The ARGV-elements have been permuted
- so that those that are not options now come last.)
-
- OPTSTRING is a string containing the legitimate option characters.
- If an option character is seen that is not listed in OPTSTRING,
- return '?' after printing an error message. If you set 'opterr' to
- zero, the error message is suppressed but we still return '?'.
-
- If a char in OPTSTRING is followed by a colon, that means it wants an arg,
- so the following text in the same ARGV-element, or the text of the following
- ARGV-element, is returned in 'optarg'. Two colons mean an option that
- wants an optional arg; if there is text in the current ARGV-element,
- it is returned in 'optarg', otherwise 'optarg' is set to zero.
-
- If OPTSTRING starts with '-' or '+', it requests different methods of
- handling the non-option ARGV-elements.
- See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above.
-
- Long-named options begin with '--' instead of '-'.
- Their names may be abbreviated as long as the abbreviation is unique
- or is an exact match for some defined option. If they have an
- argument, it follows the option name in the same ARGV-element, separated
- from the option name by a '=', or else the in next ARGV-element.
- When 'getopt' finds a long-named option, it returns 0 if that option's
- 'flag' field is nonzero, the value of the option's 'val' field
- if the 'flag' field is zero.
-
- The elements of ARGV aren't really const, because we permute them.
- But we pretend they're const in the prototype to be compatible
- with other systems.
-
- LONGOPTS is a vector of 'struct option' terminated by an
- element containing a name which is zero.
-
- LONGIND returns the index in LONGOPT of the long-named option found.
- It is only valid when a long-named option has been found by the most
- recent call.
-
- If LONG_ONLY is nonzero, '-' as well as '--' can introduce
- long-named options. */
-
-int
-_getopt_internal_r (int argc, char **argv, const char *optstring,
- const struct option *longopts, int *longind,
- int long_only, struct _getopt_data *d, int posixly_correct)
-{
- int print_errors = d->opterr;
-
- if (argc < 1)
- return -1;
-
- d->optarg = NULL;
-
- if (d->optind == 0 || !d->__initialized)
- {
- if (d->optind == 0)
- d->optind = 1; /* Don't scan ARGV[0], the program name. */
- optstring = _getopt_initialize (argc, argv, optstring, d,
- posixly_correct);
- d->__initialized = 1;
- }
- else if (optstring[0] == '-' || optstring[0] == '+')
- optstring++;
- if (optstring[0] == ':')
- print_errors = 0;
-
- /* Test whether ARGV[optind] points to a non-option argument.
- Either it does not have option syntax, or there is an environment flag
- from the shell indicating it is not an option. The later information
- is only used when the used in the GNU libc. */
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
-# define NONOPTION_P (argv[d->optind][0] != '-' || argv[d->optind][1] == '\0' \
- || (d->optind < d->__nonoption_flags_len \
- && __getopt_nonoption_flags[d->optind] == '1'))
-#else
-# define NONOPTION_P (argv[d->optind][0] != '-' || argv[d->optind][1] == '\0')
-#endif
-
- if (d->__nextchar == NULL || *d->__nextchar == '\0')
- {
- /* Advance to the next ARGV-element. */
-
- /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been
- moved back by the user (who may also have changed the arguments). */
- if (d->__last_nonopt > d->optind)
- d->__last_nonopt = d->optind;
- if (d->__first_nonopt > d->optind)
- d->__first_nonopt = d->optind;
-
- if (d->__ordering == PERMUTE)
- {
- /* If we have just processed some options following some non-options,
- exchange them so that the options come first. */
-
- if (d->__first_nonopt != d->__last_nonopt
- && d->__last_nonopt != d->optind)
- exchange ((char **) argv, d);
- else if (d->__last_nonopt != d->optind)
- d->__first_nonopt = d->optind;
-
- /* Skip any additional non-options
- and extend the range of non-options previously skipped. */
-
- while (d->optind < argc && NONOPTION_P)
- d->optind++;
- d->__last_nonopt = d->optind;
- }
-
- /* The special ARGV-element '--' means premature end of options.
- Skip it like a null option,
- then exchange with previous non-options as if it were an option,
- then skip everything else like a non-option. */
-
- if (d->optind != argc && !strcmp (argv[d->optind], "--"))
- {
- d->optind++;
-
- if (d->__first_nonopt != d->__last_nonopt
- && d->__last_nonopt != d->optind)
- exchange ((char **) argv, d);
- else if (d->__first_nonopt == d->__last_nonopt)
- d->__first_nonopt = d->optind;
- d->__last_nonopt = argc;
-
- d->optind = argc;
- }
-
- /* If we have done all the ARGV-elements, stop the scan
- and back over any non-options that we skipped and permuted. */
-
- if (d->optind == argc)
- {
- /* Set the next-arg-index to point at the non-options
- that we previously skipped, so the caller will digest them. */
- if (d->__first_nonopt != d->__last_nonopt)
- d->optind = d->__first_nonopt;
- return -1;
- }
-
- /* If we have come to a non-option and did not permute it,
- either stop the scan or describe it to the caller and pass it by. */
-
- if (NONOPTION_P)
- {
- if (d->__ordering == REQUIRE_ORDER)
- return -1;
- d->optarg = argv[d->optind++];
- return 1;
- }
-
- /* We have found another option-ARGV-element.
- Skip the initial punctuation. */
-
- d->__nextchar = (argv[d->optind] + 1
- + (longopts != NULL && argv[d->optind][1] == '-'));
- }
-
- /* Decode the current option-ARGV-element. */
-
- /* Check whether the ARGV-element is a long option.
-
- If long_only and the ARGV-element has the form "-f", where f is
- a valid short option, don't consider it an abbreviated form of
- a long option that starts with f. Otherwise there would be no
- way to give the -f short option.
-
- On the other hand, if there's a long option "fubar" and
- the ARGV-element is "-fu", do consider that an abbreviation of
- the long option, just like "--fu", and not "-f" with arg "u".
-
- This distinction seems to be the most useful approach. */
-
- if (longopts != NULL
- && (argv[d->optind][1] == '-'
- || (long_only && (argv[d->optind][2]
- || !strchr (optstring, argv[d->optind][1])))))
- {
- char *nameend;
- unsigned int namelen;
- const struct option *p;
- const struct option *pfound = NULL;
- struct option_list
- {
- const struct option *p;
- struct option_list *next;
- } *ambig_list = NULL;
- int exact = 0;
- int indfound = -1;
- int option_index;
-
- for (nameend = d->__nextchar; *nameend && *nameend != '='; nameend++)
- /* Do nothing. */ ;
- namelen = nameend - d->__nextchar;
-
- /* Test all long options for either exact match
- or abbreviated matches. */
- for (p = longopts, option_index = 0; p->name; p++, option_index++)
- if (!strncmp (p->name, d->__nextchar, namelen))
- {
- if (namelen == (unsigned int) strlen (p->name))
- {
- /* Exact match found. */
- pfound = p;
- indfound = option_index;
- exact = 1;
- break;
- }
- else if (pfound == NULL)
- {
- /* First nonexact match found. */
- pfound = p;
- indfound = option_index;
- }
- else if (long_only
- || pfound->has_arg != p->has_arg
- || pfound->flag != p->flag
- || pfound->val != p->val)
- {
- /* Second or later nonexact match found. */
- struct option_list *newp = malloc (sizeof (*newp));
- newp->p = p;
- newp->next = ambig_list;
- ambig_list = newp;
- }
- }
-
- if (ambig_list != NULL && !exact)
- {
- if (print_errors)
- {
- struct option_list first;
- first.p = pfound;
- first.next = ambig_list;
- ambig_list = &first;
-
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf = NULL;
- size_t buflen = 0;
-
- FILE *fp = open_memstream (&buf, &buflen);
- if (fp != NULL)
- {
- fprintf (fp,
- _("%s: option '%s' is ambiguous; possibilities:"),
- argv[0], argv[d->optind]);
-
- do
- {
- fprintf (fp, " '--%s'", ambig_list->p->name);
- ambig_list = ambig_list->next;
- }
- while (ambig_list != NULL);
-
- fputc_unlocked ('\n', fp);
-
- if (__builtin_expect (fclose (fp) != EOF, 1))
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
- }
-#else
- fprintf (stderr,
- _("%s: option '%s' is ambiguous; possibilities:"),
- argv[0], argv[d->optind]);
- do
- {
- fprintf (stderr, " '--%s'", ambig_list->p->name);
- ambig_list = ambig_list->next;
- }
- while (ambig_list != NULL);
-
- fputc ('\n', stderr);
-#endif
- }
- d->__nextchar += strlen (d->__nextchar);
- d->optind++;
- d->optopt = 0;
- return '?';
- }
-
- while (ambig_list != NULL)
- {
- struct option_list *pn = ambig_list->next;
- free (ambig_list);
- ambig_list = pn;
- }
-
- if (pfound != NULL)
- {
- option_index = indfound;
- d->optind++;
- if (*nameend)
- {
- /* Don't test has_arg with >, because some C compilers don't
- allow it to be used on enums. */
- if (pfound->has_arg)
- d->optarg = nameend + 1;
- else
- {
- if (print_errors)
- {
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf;
- int n;
-#endif
-
- if (argv[d->optind - 1][1] == '-')
- {
- /* --option */
-#if defined _LIBC && defined USE_IN_LIBIO
- n = __asprintf (&buf, _("\
-%s: option '--%s' doesn't allow an argument\n"),
- argv[0], pfound->name);
-#else
- fprintf (stderr, _("\
-%s: option '--%s' doesn't allow an argument\n"),
- argv[0], pfound->name);
-#endif
- }
- else
- {
- /* +option or -option */
-#if defined _LIBC && defined USE_IN_LIBIO
- n = __asprintf (&buf, _("\
-%s: option '%c%s' doesn't allow an argument\n"),
- argv[0], argv[d->optind - 1][0],
- pfound->name);
-#else
- fprintf (stderr, _("\
-%s: option '%c%s' doesn't allow an argument\n"),
- argv[0], argv[d->optind - 1][0],
- pfound->name);
-#endif
- }
-
-#if defined _LIBC && defined USE_IN_LIBIO
- if (n >= 0)
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2
- |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
-#endif
- }
-
- d->__nextchar += strlen (d->__nextchar);
-
- d->optopt = pfound->val;
- return '?';
- }
- }
- else if (pfound->has_arg == 1)
- {
- if (d->optind < argc)
- d->optarg = argv[d->optind++];
- else
- {
- if (print_errors)
- {
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf;
-
- if (__asprintf (&buf, _("\
-%s: option '--%s' requires an argument\n"),
- argv[0], pfound->name) >= 0)
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2
- |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
-#else
- fprintf (stderr,
- _("%s: option '--%s' requires an argument\n"),
- argv[0], pfound->name);
-#endif
- }
- d->__nextchar += strlen (d->__nextchar);
- d->optopt = pfound->val;
- return optstring[0] == ':' ? ':' : '?';
- }
- }
- d->__nextchar += strlen (d->__nextchar);
- if (longind != NULL)
- *longind = option_index;
- if (pfound->flag)
- {
- *(pfound->flag) = pfound->val;
- return 0;
- }
- return pfound->val;
- }
-
- /* Can't find it as a long option. If this is not getopt_long_only,
- or the option starts with '--' or is not a valid short
- option, then it's an error.
- Otherwise interpret it as a short option. */
- if (!long_only || argv[d->optind][1] == '-'
- || strchr (optstring, *d->__nextchar) == NULL)
- {
- if (print_errors)
- {
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf;
- int n;
-#endif
-
- if (argv[d->optind][1] == '-')
- {
- /* --option */
-#if defined _LIBC && defined USE_IN_LIBIO
- n = __asprintf (&buf, _("%s: unrecognized option '--%s'\n"),
- argv[0], d->__nextchar);
-#else
- fprintf (stderr, _("%s: unrecognized option '--%s'\n"),
- argv[0], d->__nextchar);
-#endif
- }
- else
- {
- /* +option or -option */
-#if defined _LIBC && defined USE_IN_LIBIO
- n = __asprintf (&buf, _("%s: unrecognized option '%c%s'\n"),
- argv[0], argv[d->optind][0], d->__nextchar);
-#else
- fprintf (stderr, _("%s: unrecognized option '%c%s'\n"),
- argv[0], argv[d->optind][0], d->__nextchar);
-#endif
- }
-
-#if defined _LIBC && defined USE_IN_LIBIO
- if (n >= 0)
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
-#endif
- }
- d->__nextchar = (char *) "";
- d->optind++;
- d->optopt = 0;
- return '?';
- }
- }
-
- /* Look at and handle the next short option-character. */
-
- {
- char c = *d->__nextchar++;
- const char *temp = strchr (optstring, c);
-
- /* Increment 'optind' when we start to process its last character. */
- if (*d->__nextchar == '\0')
- ++d->optind;
-
- if (temp == NULL || c == ':' || c == ';')
- {
- if (print_errors)
- {
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf;
- int n;
-#endif
-
-#if defined _LIBC && defined USE_IN_LIBIO
- n = __asprintf (&buf, _("%s: invalid option -- '%c'\n"),
- argv[0], c);
-#else
- fprintf (stderr, _("%s: invalid option -- '%c'\n"), argv[0], c);
-#endif
-
-#if defined _LIBC && defined USE_IN_LIBIO
- if (n >= 0)
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
-#endif
- }
- d->optopt = c;
- return '?';
- }
- /* Convenience. Treat POSIX -W foo same as long option --foo */
- if (temp[0] == 'W' && temp[1] == ';')
- {
- char *nameend;
- const struct option *p;
- const struct option *pfound = NULL;
- int exact = 0;
- int ambig = 0;
- int indfound = 0;
- int option_index;
-
- if (longopts == NULL)
- goto no_longs;
-
- /* This is an option that requires an argument. */
- if (*d->__nextchar != '\0')
- {
- d->optarg = d->__nextchar;
- /* If we end this ARGV-element by taking the rest as an arg,
- we must advance to the next element now. */
- d->optind++;
- }
- else if (d->optind == argc)
- {
- if (print_errors)
- {
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf;
-
- if (__asprintf (&buf,
- _("%s: option requires an argument -- '%c'\n"),
- argv[0], c) >= 0)
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
-#else
- fprintf (stderr,
- _("%s: option requires an argument -- '%c'\n"),
- argv[0], c);
-#endif
- }
- d->optopt = c;
- if (optstring[0] == ':')
- c = ':';
- else
- c = '?';
- return c;
- }
- else
- /* We already incremented 'd->optind' once;
- increment it again when taking next ARGV-elt as argument. */
- d->optarg = argv[d->optind++];
-
- /* optarg is now the argument, see if it's in the
- table of longopts. */
-
- for (d->__nextchar = nameend = d->optarg; *nameend && *nameend != '=';
- nameend++)
- /* Do nothing. */ ;
-
- /* Test all long options for either exact match
- or abbreviated matches. */
- for (p = longopts, option_index = 0; p->name; p++, option_index++)
- if (!strncmp (p->name, d->__nextchar, nameend - d->__nextchar))
- {
- if ((unsigned int) (nameend - d->__nextchar) == strlen (p->name))
- {
- /* Exact match found. */
- pfound = p;
- indfound = option_index;
- exact = 1;
- break;
- }
- else if (pfound == NULL)
- {
- /* First nonexact match found. */
- pfound = p;
- indfound = option_index;
- }
- else if (long_only
- || pfound->has_arg != p->has_arg
- || pfound->flag != p->flag
- || pfound->val != p->val)
- /* Second or later nonexact match found. */
- ambig = 1;
- }
- if (ambig && !exact)
- {
- if (print_errors)
- {
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf;
-
- if (__asprintf (&buf, _("%s: option '-W %s' is ambiguous\n"),
- argv[0], d->optarg) >= 0)
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
-#else
- fprintf (stderr, _("%s: option '-W %s' is ambiguous\n"),
- argv[0], d->optarg);
-#endif
- }
- d->__nextchar += strlen (d->__nextchar);
- d->optind++;
- return '?';
- }
- if (pfound != NULL)
- {
- option_index = indfound;
- if (*nameend)
- {
- /* Don't test has_arg with >, because some C compilers don't
- allow it to be used on enums. */
- if (pfound->has_arg)
- d->optarg = nameend + 1;
- else
- {
- if (print_errors)
- {
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf;
-
- if (__asprintf (&buf, _("\
-%s: option '-W %s' doesn't allow an argument\n"),
- argv[0], pfound->name) >= 0)
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2
- |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
-#else
- fprintf (stderr, _("\
-%s: option '-W %s' doesn't allow an argument\n"),
- argv[0], pfound->name);
-#endif
- }
-
- d->__nextchar += strlen (d->__nextchar);
- return '?';
- }
- }
- else if (pfound->has_arg == 1)
- {
- if (d->optind < argc)
- d->optarg = argv[d->optind++];
- else
- {
- if (print_errors)
- {
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf;
-
- if (__asprintf (&buf, _("\
-%s: option '-W %s' requires an argument\n"),
- argv[0], pfound->name) >= 0)
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2
- |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
-#else
- fprintf (stderr, _("\
-%s: option '-W %s' requires an argument\n"),
- argv[0], pfound->name);
-#endif
- }
- d->__nextchar += strlen (d->__nextchar);
- return optstring[0] == ':' ? ':' : '?';
- }
- }
- else
- d->optarg = NULL;
- d->__nextchar += strlen (d->__nextchar);
- if (longind != NULL)
- *longind = option_index;
- if (pfound->flag)
- {
- *(pfound->flag) = pfound->val;
- return 0;
- }
- return pfound->val;
- }
-
- no_longs:
- d->__nextchar = NULL;
- return 'W'; /* Let the application handle it. */
- }
- if (temp[1] == ':')
- {
- if (temp[2] == ':')
- {
- /* This is an option that accepts an argument optionally. */
- if (*d->__nextchar != '\0')
- {
- d->optarg = d->__nextchar;
- d->optind++;
- }
- else
- d->optarg = NULL;
- d->__nextchar = NULL;
- }
- else
- {
- /* This is an option that requires an argument. */
- if (*d->__nextchar != '\0')
- {
- d->optarg = d->__nextchar;
- /* If we end this ARGV-element by taking the rest as an arg,
- we must advance to the next element now. */
- d->optind++;
- }
- else if (d->optind == argc)
- {
- if (print_errors)
- {
-#if defined _LIBC && defined USE_IN_LIBIO
- char *buf;
-
- if (__asprintf (&buf, _("\
-%s: option requires an argument -- '%c'\n"),
- argv[0], c) >= 0)
- {
- _IO_flockfile (stderr);
-
- int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
- ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
-
- __fxprintf (NULL, "%s", buf);
-
- ((_IO_FILE *) stderr)->_flags2 = old_flags2;
- _IO_funlockfile (stderr);
-
- free (buf);
- }
-#else
- fprintf (stderr,
- _("%s: option requires an argument -- '%c'\n"),
- argv[0], c);
-#endif
- }
- d->optopt = c;
- if (optstring[0] == ':')
- c = ':';
- else
- c = '?';
- }
- else
- /* We already incremented 'optind' once;
- increment it again when taking next ARGV-elt as argument. */
- d->optarg = argv[d->optind++];
- d->__nextchar = NULL;
- }
- }
- return c;
- }
-}
-
-int
-_getopt_internal (int argc, char **argv, const char *optstring,
- const struct option *longopts, int *longind, int long_only,
- int posixly_correct)
-{
- int result;
-
- getopt_data.optind = optind;
- getopt_data.opterr = opterr;
-
- result = _getopt_internal_r (argc, argv, optstring, longopts,
- longind, long_only, &getopt_data,
- posixly_correct);
-
- optind = getopt_data.optind;
- optarg = getopt_data.optarg;
- optopt = getopt_data.optopt;
-
- return result;
-}
-
-/* glibc gets a LSB-compliant getopt.
- Standalone applications get a POSIX-compliant getopt. */
-#if _LIBC
-enum { POSIXLY_CORRECT = 0 };
-#else
-enum { POSIXLY_CORRECT = 1 };
-#endif
-
-int
-getopt (int argc, char *const *argv, const char *optstring)
-{
- return _getopt_internal (argc, (char **) argv, optstring,
- (const struct option *) 0,
- (int *) 0,
- 0, POSIXLY_CORRECT);
-}
-
-#ifdef _LIBC
-int
-__posix_getopt (int argc, char *const *argv, const char *optstring)
-{
- return _getopt_internal (argc, argv, optstring,
- (const struct option *) 0,
- (int *) 0,
- 0, 1);
-}
-#endif
-
-\f
-#ifdef TEST
-
-/* Compile with -DTEST to make an executable for use in testing
- the above definition of 'getopt'. */
-
-int
-main (int argc, char **argv)
-{
- int c;
- int digit_optind = 0;
-
- while (1)
- {
- int this_option_optind = optind ? optind : 1;
-
- c = getopt (argc, argv, "abc:d:0123456789");
- if (c == -1)
- break;
-
- switch (c)
- {
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- if (digit_optind != 0 && digit_optind != this_option_optind)
- printf ("digits occur in two different argv-elements.\n");
- digit_optind = this_option_optind;
- printf ("option %c\n", c);
- break;
-
- case 'a':
- printf ("option a\n");
- break;
-
- case 'b':
- printf ("option b\n");
- break;
-
- case 'c':
- printf ("option c with value '%s'\n", optarg);
- break;
-
- case '?':
- break;
-
- default:
- printf ("?? getopt returned character code 0%o ??\n", c);
- }
- }
-
- if (optind < argc)
- {
- printf ("non-option ARGV-elements: ");
- while (optind < argc)
- printf ("%s ", argv[optind++]);
- printf ("\n");
- }
-
- exit (0);
-}
-
-#endif /* TEST */
+++ /dev/null
-/* Declarations for getopt.
- Copyright (C) 1989-1994, 1996-1999, 2001, 2003-2007, 2009-2012 Free Software
- Foundation, Inc.
- This file is part of the GNU C Library.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _@GUARD_PREFIX@_GETOPT_H
-
-#if __GNUC__ >= 3
-@PRAGMA_SYSTEM_HEADER@
-#endif
-@PRAGMA_COLUMNS@
-
-/* The include_next requires a split double-inclusion guard. We must
- also inform the replacement unistd.h to not recursively use
- <getopt.h>; our definitions will be present soon enough. */
-#if @HAVE_GETOPT_H@
-# define _GL_SYSTEM_GETOPT
-# @INCLUDE_NEXT@ @NEXT_GETOPT_H@
-# undef _GL_SYSTEM_GETOPT
-#endif
-
-#ifndef _@GUARD_PREFIX@_GETOPT_H
-
-#ifndef __need_getopt
-# define _@GUARD_PREFIX@_GETOPT_H 1
-#endif
-
-/* Standalone applications should #define __GETOPT_PREFIX to an
- identifier that prefixes the external functions and variables
- defined in this header. When this happens, include the
- headers that might declare getopt so that they will not cause
- confusion if included after this file (if the system had <getopt.h>,
- we have already included it). Then systematically rename
- identifiers so that they do not collide with the system functions
- and variables. Renaming avoids problems with some compilers and
- linkers. */
-#if defined __GETOPT_PREFIX && !defined __need_getopt
-# if !@HAVE_GETOPT_H@
-# include <stdlib.h>
-# include <stdio.h>
-# include <unistd.h>
-# endif
-# undef __need_getopt
-# undef getopt
-# undef getopt_long
-# undef getopt_long_only
-# undef optarg
-# undef opterr
-# undef optind
-# undef optopt
-# undef option
-# define __GETOPT_CONCAT(x, y) x ## y
-# define __GETOPT_XCONCAT(x, y) __GETOPT_CONCAT (x, y)
-# define __GETOPT_ID(y) __GETOPT_XCONCAT (__GETOPT_PREFIX, y)
-# define getopt __GETOPT_ID (getopt)
-# define getopt_long __GETOPT_ID (getopt_long)
-# define getopt_long_only __GETOPT_ID (getopt_long_only)
-# define optarg __GETOPT_ID (optarg)
-# define opterr __GETOPT_ID (opterr)
-# define optind __GETOPT_ID (optind)
-# define optopt __GETOPT_ID (optopt)
-# define option __GETOPT_ID (option)
-# define _getopt_internal __GETOPT_ID (getopt_internal)
-#endif
-
-/* Standalone applications get correct prototypes for getopt_long and
- getopt_long_only; they declare "char **argv". libc uses prototypes
- with "char *const *argv" that are incorrect because getopt_long and
- getopt_long_only can permute argv; this is required for backward
- compatibility (e.g., for LSB 2.0.1).
-
- This used to be '#if defined __GETOPT_PREFIX && !defined __need_getopt',
- but it caused redefinition warnings if both unistd.h and getopt.h were
- included, since unistd.h includes getopt.h having previously defined
- __need_getopt.
-
- The only place where __getopt_argv_const is used is in definitions
- of getopt_long and getopt_long_only below, but these are visible
- only if __need_getopt is not defined, so it is quite safe to rewrite
- the conditional as follows:
-*/
-#if !defined __need_getopt
-# if defined __GETOPT_PREFIX
-# define __getopt_argv_const /* empty */
-# else
-# define __getopt_argv_const const
-# endif
-#endif
-
-/* If __GNU_LIBRARY__ is not already defined, either we are being used
- standalone, or this is the first header included in the source file.
- If we are being used with glibc, we need to include <features.h>, but
- that does not exist if we are standalone. So: if __GNU_LIBRARY__ is
- not defined, include <ctype.h>, which will pull in <features.h> for us
- if it's from glibc. (Why ctype.h? It's guaranteed to exist and it
- doesn't flood the namespace with stuff the way some other headers do.) */
-#if !defined __GNU_LIBRARY__
-# include <ctype.h>
-#endif
-
-#ifndef __THROW
-# ifndef __GNUC_PREREQ
-# define __GNUC_PREREQ(maj, min) (0)
-# endif
-# if defined __cplusplus && __GNUC_PREREQ (2,8)
-# define __THROW throw ()
-# else
-# define __THROW
-# endif
-#endif
-
-/* The definition of _GL_ARG_NONNULL is copied here. */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* For communication from 'getopt' to the caller.
- When 'getopt' finds an option that takes an argument,
- the argument value is returned here.
- Also, when 'ordering' is RETURN_IN_ORDER,
- each non-option ARGV-element is returned here. */
-
-extern char *optarg;
-
-/* Index in ARGV of the next element to be scanned.
- This is used for communication to and from the caller
- and for communication between successive calls to 'getopt'.
-
- On entry to 'getopt', zero means this is the first call; initialize.
-
- When 'getopt' returns -1, this is the index of the first of the
- non-option elements that the caller should itself scan.
-
- Otherwise, 'optind' communicates from one call to the next
- how much of ARGV has been scanned so far. */
-
-extern int optind;
-
-/* Callers store zero here to inhibit the error message 'getopt' prints
- for unrecognized options. */
-
-extern int opterr;
-
-/* Set to an option character which was unrecognized. */
-
-extern int optopt;
-
-#ifndef __need_getopt
-/* Describe the long-named options requested by the application.
- The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
- of 'struct option' terminated by an element containing a name which is
- zero.
-
- The field 'has_arg' is:
- no_argument (or 0) if the option does not take an argument,
- required_argument (or 1) if the option requires an argument,
- optional_argument (or 2) if the option takes an optional argument.
-
- If the field 'flag' is not NULL, it points to a variable that is set
- to the value given in the field 'val' when the option is found, but
- left unchanged if the option is not found.
-
- To have a long-named option do something other than set an 'int' to
- a compiled-in constant, such as set a value from 'optarg', set the
- option's 'flag' field to zero and its 'val' field to a nonzero
- value (the equivalent single-letter option character, if there is
- one). For long options that have a zero 'flag' field, 'getopt'
- returns the contents of the 'val' field. */
-
-# if !GNULIB_defined_struct_option
-struct option
-{
- const char *name;
- /* has_arg can't be an enum because some compilers complain about
- type mismatches in all the code that assumes it is an int. */
- int has_arg;
- int *flag;
- int val;
-};
-# define GNULIB_defined_struct_option 1
-# endif
-
-/* Names for the values of the 'has_arg' field of 'struct option'. */
-
-# define no_argument 0
-# define required_argument 1
-# define optional_argument 2
-#endif /* need getopt */
-
-
-/* Get definitions and prototypes for functions to process the
- arguments in ARGV (ARGC of them, minus the program name) for
- options given in OPTS.
-
- Return the option character from OPTS just read. Return -1 when
- there are no more options. For unrecognized options, or options
- missing arguments, 'optopt' is set to the option letter, and '?' is
- returned.
-
- The OPTS string is a list of characters which are recognized option
- letters, optionally followed by colons, specifying that that letter
- takes an argument, to be placed in 'optarg'.
-
- If a letter in OPTS is followed by two colons, its argument is
- optional. This behavior is specific to the GNU 'getopt'.
-
- The argument '--' causes premature termination of argument
- scanning, explicitly telling 'getopt' that there are no more
- options.
-
- If OPTS begins with '-', then non-option arguments are treated as
- arguments to the option '\1'. This behavior is specific to the GNU
- 'getopt'. If OPTS begins with '+', or POSIXLY_CORRECT is set in
- the environment, then do not permute arguments. */
-
-extern int getopt (int ___argc, char *const *___argv, const char *__shortopts)
- __THROW _GL_ARG_NONNULL ((2, 3));
-
-#ifndef __need_getopt
-extern int getopt_long (int ___argc, char *__getopt_argv_const *___argv,
- const char *__shortopts,
- const struct option *__longopts, int *__longind)
- __THROW _GL_ARG_NONNULL ((2, 3));
-extern int getopt_long_only (int ___argc, char *__getopt_argv_const *___argv,
- const char *__shortopts,
- const struct option *__longopts, int *__longind)
- __THROW _GL_ARG_NONNULL ((2, 3));
-
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-/* Make sure we later can get all the definitions and declarations. */
-#undef __need_getopt
-
-#endif /* _@GUARD_PREFIX@_GETOPT_H */
-#endif /* _@GUARD_PREFIX@_GETOPT_H */
+++ /dev/null
-/* getopt_long and getopt_long_only entry points for GNU getopt.
- Copyright (C) 1987-1994, 1996-1998, 2004, 2006, 2009-2012 Free Software
- Foundation, Inc.
- This file is part of the GNU C Library.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-\f
-#ifdef _LIBC
-# include <getopt.h>
-#else
-# include <config.h>
-# include "getopt.h"
-#endif
-#include "getopt_int.h"
-
-#include <stdio.h>
-
-/* This needs to come after some library #include
- to get __GNU_LIBRARY__ defined. */
-#ifdef __GNU_LIBRARY__
-#include <stdlib.h>
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-int
-getopt_long (int argc, char *__getopt_argv_const *argv, const char *options,
- const struct option *long_options, int *opt_index)
-{
- return _getopt_internal (argc, (char **) argv, options, long_options,
- opt_index, 0, 0);
-}
-
-int
-_getopt_long_r (int argc, char **argv, const char *options,
- const struct option *long_options, int *opt_index,
- struct _getopt_data *d)
-{
- return _getopt_internal_r (argc, argv, options, long_options, opt_index,
- 0, d, 0);
-}
-
-/* Like getopt_long, but '-' as well as '--' can indicate a long option.
- If an option that starts with '-' (not '--') doesn't match a long option,
- but does match a short option, it is parsed as a short option
- instead. */
-
-int
-getopt_long_only (int argc, char *__getopt_argv_const *argv,
- const char *options,
- const struct option *long_options, int *opt_index)
-{
- return _getopt_internal (argc, (char **) argv, options, long_options,
- opt_index, 1, 0);
-}
-
-int
-_getopt_long_only_r (int argc, char **argv, const char *options,
- const struct option *long_options, int *opt_index,
- struct _getopt_data *d)
-{
- return _getopt_internal_r (argc, argv, options, long_options, opt_index,
- 1, d, 0);
-}
-
-\f
-#ifdef TEST
-
-#include <stdio.h>
-
-int
-main (int argc, char **argv)
-{
- int c;
- int digit_optind = 0;
-
- while (1)
- {
- int this_option_optind = optind ? optind : 1;
- int option_index = 0;
- static const struct option long_options[] =
- {
- {"add", 1, 0, 0},
- {"append", 0, 0, 0},
- {"delete", 1, 0, 0},
- {"verbose", 0, 0, 0},
- {"create", 0, 0, 0},
- {"file", 1, 0, 0},
- {0, 0, 0, 0}
- };
-
- c = getopt_long (argc, argv, "abc:d:0123456789",
- long_options, &option_index);
- if (c == -1)
- break;
-
- switch (c)
- {
- case 0:
- printf ("option %s", long_options[option_index].name);
- if (optarg)
- printf (" with arg %s", optarg);
- printf ("\n");
- break;
-
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- if (digit_optind != 0 && digit_optind != this_option_optind)
- printf ("digits occur in two different argv-elements.\n");
- digit_optind = this_option_optind;
- printf ("option %c\n", c);
- break;
-
- case 'a':
- printf ("option a\n");
- break;
-
- case 'b':
- printf ("option b\n");
- break;
-
- case 'c':
- printf ("option c with value '%s'\n", optarg);
- break;
-
- case 'd':
- printf ("option d with value '%s'\n", optarg);
- break;
-
- case '?':
- break;
-
- default:
- printf ("?? getopt returned character code 0%o ??\n", c);
- }
- }
-
- if (optind < argc)
- {
- printf ("non-option ARGV-elements: ");
- while (optind < argc)
- printf ("%s ", argv[optind++]);
- printf ("\n");
- }
-
- exit (0);
-}
-
-#endif /* TEST */
+++ /dev/null
-/* Internal declarations for getopt.
- Copyright (C) 1989-1994, 1996-1999, 2001, 2003-2004, 2009-2012 Free Software
- Foundation, Inc.
- This file is part of the GNU C Library.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _GETOPT_INT_H
-#define _GETOPT_INT_H 1
-
-#include <getopt.h>
-
-extern int _getopt_internal (int ___argc, char **___argv,
- const char *__shortopts,
- const struct option *__longopts, int *__longind,
- int __long_only, int __posixly_correct);
-
-\f
-/* Reentrant versions which can handle parsing multiple argument
- vectors at the same time. */
-
-/* Describe how to deal with options that follow non-option ARGV-elements.
-
- If the caller did not specify anything,
- the default is REQUIRE_ORDER if the environment variable
- POSIXLY_CORRECT is defined, PERMUTE otherwise.
-
- REQUIRE_ORDER means don't recognize them as options;
- stop option processing when the first non-option is seen.
- This is what Unix does.
- This mode of operation is selected by either setting the environment
- variable POSIXLY_CORRECT, or using '+' as the first character
- of the list of option characters, or by calling getopt.
-
- PERMUTE is the default. We permute the contents of ARGV as we
- scan, so that eventually all the non-options are at the end.
- This allows options to be given in any order, even with programs
- that were not written to expect this.
-
- RETURN_IN_ORDER is an option available to programs that were
- written to expect options and other ARGV-elements in any order
- and that care about the ordering of the two. We describe each
- non-option ARGV-element as if it were the argument of an option
- with character code 1. Using '-' as the first character of the
- list of option characters selects this mode of operation.
-
- The special argument '--' forces an end of option-scanning regardless
- of the value of 'ordering'. In the case of RETURN_IN_ORDER, only
- '--' can cause 'getopt' to return -1 with 'optind' != ARGC. */
-
-enum __ord
- {
- REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
- };
-
-/* Data type for reentrant functions. */
-struct _getopt_data
-{
- /* These have exactly the same meaning as the corresponding global
- variables, except that they are used for the reentrant
- versions of getopt. */
- int optind;
- int opterr;
- int optopt;
- char *optarg;
-
- /* Internal members. */
-
- /* True if the internal members have been initialized. */
- int __initialized;
-
- /* The next char to be scanned in the option-element
- in which the last option character we returned was found.
- This allows us to pick up the scan where we left off.
-
- If this is zero, or a null string, it means resume the scan
- by advancing to the next ARGV-element. */
- char *__nextchar;
-
- /* See __ord above. */
- enum __ord __ordering;
-
- /* If the POSIXLY_CORRECT environment variable is set
- or getopt was called. */
- int __posixly_correct;
-
-
- /* Handle permutation of arguments. */
-
- /* Describe the part of ARGV that contains non-options that have
- been skipped. 'first_nonopt' is the index in ARGV of the first
- of them; 'last_nonopt' is the index after the last of them. */
-
- int __first_nonopt;
- int __last_nonopt;
-
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
- int __nonoption_flags_max_len;
- int __nonoption_flags_len;
-#endif
-};
-
-/* The initializer is necessary to set OPTIND and OPTERR to their
- default values and to clear the initialization flag. */
-#define _GETOPT_DATA_INITIALIZER { 1, 1 }
-
-extern int _getopt_internal_r (int ___argc, char **___argv,
- const char *__shortopts,
- const struct option *__longopts, int *__longind,
- int __long_only, struct _getopt_data *__data,
- int __posixly_correct);
-
-extern int _getopt_long_r (int ___argc, char **___argv,
- const char *__shortopts,
- const struct option *__longopts, int *__longind,
- struct _getopt_data *__data);
-
-extern int _getopt_long_only_r (int ___argc, char **___argv,
- const char *__shortopts,
- const struct option *__longopts,
- int *__longind,
- struct _getopt_data *__data);
-
-#endif /* getopt_int.h */
+++ /dev/null
-/* Convenience header for conditional use of GNU <libintl.h>.
- Copyright (C) 1995-1998, 2000-2002, 2004-2006, 2009-2012 Free Software
- Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _LIBGETTEXT_H
-#define _LIBGETTEXT_H 1
-
-/* NLS can be disabled through the configure --disable-nls option. */
-#if ENABLE_NLS
-
-/* Get declarations of GNU message catalog functions. */
-# include <libintl.h>
-
-/* You can set the DEFAULT_TEXT_DOMAIN macro to specify the domain used by
- the gettext() and ngettext() macros. This is an alternative to calling
- textdomain(), and is useful for libraries. */
-# ifdef DEFAULT_TEXT_DOMAIN
-# undef gettext
-# define gettext(Msgid) \
- dgettext (DEFAULT_TEXT_DOMAIN, Msgid)
-# undef ngettext
-# define ngettext(Msgid1, Msgid2, N) \
- dngettext (DEFAULT_TEXT_DOMAIN, Msgid1, Msgid2, N)
-# endif
-
-#else
-
-/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which
- chokes if dcgettext is defined as a macro. So include it now, to make
- later inclusions of <locale.h> a NOP. We don't include <libintl.h>
- as well because people using "gettext.h" will not include <libintl.h>,
- and also including <libintl.h> would fail on SunOS 4, whereas <locale.h>
- is OK. */
-#if defined(__sun)
-# include <locale.h>
-#endif
-
-/* Many header files from the libstdc++ coming with g++ 3.3 or newer include
- <libintl.h>, which chokes if dcgettext is defined as a macro. So include
- it now, to make later inclusions of <libintl.h> a NOP. */
-#if defined(__cplusplus) && defined(__GNUG__) && (__GNUC__ >= 3)
-# include <cstdlib>
-# if (__GLIBC__ >= 2 && !defined __UCLIBC__) || _GLIBCXX_HAVE_LIBINTL_H
-# include <libintl.h>
-# endif
-#endif
-
-/* Disabled NLS.
- The casts to 'const char *' serve the purpose of producing warnings
- for invalid uses of the value returned from these functions.
- On pre-ANSI systems without 'const', the config.h file is supposed to
- contain "#define const". */
-# undef gettext
-# define gettext(Msgid) ((const char *) (Msgid))
-# undef dgettext
-# define dgettext(Domainname, Msgid) ((void) (Domainname), gettext (Msgid))
-# undef dcgettext
-# define dcgettext(Domainname, Msgid, Category) \
- ((void) (Category), dgettext (Domainname, Msgid))
-# undef ngettext
-# define ngettext(Msgid1, Msgid2, N) \
- ((N) == 1 \
- ? ((void) (Msgid2), (const char *) (Msgid1)) \
- : ((void) (Msgid1), (const char *) (Msgid2)))
-# undef dngettext
-# define dngettext(Domainname, Msgid1, Msgid2, N) \
- ((void) (Domainname), ngettext (Msgid1, Msgid2, N))
-# undef dcngettext
-# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
- ((void) (Category), dngettext (Domainname, Msgid1, Msgid2, N))
-# undef textdomain
-# define textdomain(Domainname) ((const char *) (Domainname))
-# undef bindtextdomain
-# define bindtextdomain(Domainname, Dirname) \
- ((void) (Domainname), (const char *) (Dirname))
-# undef bind_textdomain_codeset
-# define bind_textdomain_codeset(Domainname, Codeset) \
- ((void) (Domainname), (const char *) (Codeset))
-
-#endif
-
-/* Prefer gnulib's setlocale override over libintl's setlocale override. */
-#ifdef GNULIB_defined_setlocale
-# undef setlocale
-# define setlocale rpl_setlocale
-#endif
-
-/* A pseudo function call that serves as a marker for the automated
- extraction of messages, but does not call gettext(). The run-time
- translation is done at a different place in the code.
- The argument, String, should be a literal string. Concatenated strings
- and other string expressions won't work.
- The macro's expansion is not parenthesized, so that it is suitable as
- initializer for static 'char[]' or 'const char[]' variables. */
-#define gettext_noop(String) String
-
-/* The separator between msgctxt and msgid in a .mo file. */
-#define GETTEXT_CONTEXT_GLUE "\004"
-
-/* Pseudo function calls, taking a MSGCTXT and a MSGID instead of just a
- MSGID. MSGCTXT and MSGID must be string literals. MSGCTXT should be
- short and rarely need to change.
- The letter 'p' stands for 'particular' or 'special'. */
-#ifdef DEFAULT_TEXT_DOMAIN
-# define pgettext(Msgctxt, Msgid) \
- pgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES)
-#else
-# define pgettext(Msgctxt, Msgid) \
- pgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES)
-#endif
-#define dpgettext(Domainname, Msgctxt, Msgid) \
- pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES)
-#define dcpgettext(Domainname, Msgctxt, Msgid, Category) \
- pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, Category)
-#ifdef DEFAULT_TEXT_DOMAIN
-# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \
- npgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES)
-#else
-# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \
- npgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES)
-#endif
-#define dnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N) \
- npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES)
-#define dcnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N, Category) \
- npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, Category)
-
-#ifdef __GNUC__
-__inline
-#else
-#ifdef __cplusplus
-inline
-#endif
-#endif
-static const char *
-pgettext_aux (const char *domain,
- const char *msg_ctxt_id, const char *msgid,
- int category)
-{
- const char *translation = dcgettext (domain, msg_ctxt_id, category);
- if (translation == msg_ctxt_id)
- return msgid;
- else
- return translation;
-}
-
-#ifdef __GNUC__
-__inline
-#else
-#ifdef __cplusplus
-inline
-#endif
-#endif
-static const char *
-npgettext_aux (const char *domain,
- const char *msg_ctxt_id, const char *msgid,
- const char *msgid_plural, unsigned long int n,
- int category)
-{
- const char *translation =
- dcngettext (domain, msg_ctxt_id, msgid_plural, n, category);
- if (translation == msg_ctxt_id || translation == msgid_plural)
- return (n == 1 ? msgid : msgid_plural);
- else
- return translation;
-}
-
-/* The same thing extended for non-constant arguments. Here MSGCTXT and MSGID
- can be arbitrary expressions. But for string literals these macros are
- less efficient than those above. */
-
-#include <string.h>
-
-#define _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS \
- (((__GNUC__ >= 3 || __GNUG__ >= 2) && !defined __STRICT_ANSI__) \
- /* || __STDC_VERSION__ >= 199901L */ )
-
-#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
-#include <stdlib.h>
-#endif
-
-#define pgettext_expr(Msgctxt, Msgid) \
- dcpgettext_expr (NULL, Msgctxt, Msgid, LC_MESSAGES)
-#define dpgettext_expr(Domainname, Msgctxt, Msgid) \
- dcpgettext_expr (Domainname, Msgctxt, Msgid, LC_MESSAGES)
-
-#ifdef __GNUC__
-__inline
-#else
-#ifdef __cplusplus
-inline
-#endif
-#endif
-static const char *
-dcpgettext_expr (const char *domain,
- const char *msgctxt, const char *msgid,
- int category)
-{
- size_t msgctxt_len = strlen (msgctxt) + 1;
- size_t msgid_len = strlen (msgid) + 1;
- const char *translation;
-#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
- char msg_ctxt_id[msgctxt_len + msgid_len];
-#else
- char buf[1024];
- char *msg_ctxt_id =
- (msgctxt_len + msgid_len <= sizeof (buf)
- ? buf
- : (char *) malloc (msgctxt_len + msgid_len));
- if (msg_ctxt_id != NULL)
-#endif
- {
- memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1);
- msg_ctxt_id[msgctxt_len - 1] = '\004';
- memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len);
- translation = dcgettext (domain, msg_ctxt_id, category);
-#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
- if (msg_ctxt_id != buf)
- free (msg_ctxt_id);
-#endif
- if (translation != msg_ctxt_id)
- return translation;
- }
- return msgid;
-}
-
-#define npgettext_expr(Msgctxt, Msgid, MsgidPlural, N) \
- dcnpgettext_expr (NULL, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES)
-#define dnpgettext_expr(Domainname, Msgctxt, Msgid, MsgidPlural, N) \
- dcnpgettext_expr (Domainname, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES)
-
-#ifdef __GNUC__
-__inline
-#else
-#ifdef __cplusplus
-inline
-#endif
-#endif
-static const char *
-dcnpgettext_expr (const char *domain,
- const char *msgctxt, const char *msgid,
- const char *msgid_plural, unsigned long int n,
- int category)
-{
- size_t msgctxt_len = strlen (msgctxt) + 1;
- size_t msgid_len = strlen (msgid) + 1;
- const char *translation;
-#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
- char msg_ctxt_id[msgctxt_len + msgid_len];
-#else
- char buf[1024];
- char *msg_ctxt_id =
- (msgctxt_len + msgid_len <= sizeof (buf)
- ? buf
- : (char *) malloc (msgctxt_len + msgid_len));
- if (msg_ctxt_id != NULL)
-#endif
- {
- memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1);
- msg_ctxt_id[msgctxt_len - 1] = '\004';
- memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len);
- translation = dcngettext (domain, msg_ctxt_id, msgid_plural, n, category);
-#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
- if (msg_ctxt_id != buf)
- free (msg_ctxt_id);
-#endif
- if (!(translation == msg_ctxt_id || translation == msgid_plural))
- return translation;
- }
- return (n == 1 ? msgid : msgid_plural);
-}
-
-#endif /* _LIBGETTEXT_H */
+++ /dev/null
-/* intprops.h -- properties of integer types
-
- Copyright (C) 2001-2005, 2009-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Paul Eggert. */
-
-#ifndef _GL_INTPROPS_H
-#define _GL_INTPROPS_H
-
-#include <limits.h>
-
-/* Return an integer value, converted to the same type as the integer
- expression E after integer type promotion. V is the unconverted value. */
-#define _GL_INT_CONVERT(e, v) (0 * (e) + (v))
-
-/* Act like _GL_INT_CONVERT (E, -V) but work around a bug in IRIX 6.5 cc; see
- <http://lists.gnu.org/archive/html/bug-gnulib/2011-05/msg00406.html>. */
-#define _GL_INT_NEGATE_CONVERT(e, v) (0 * (e) - (v))
-
-/* The extra casts in the following macros work around compiler bugs,
- e.g., in Cray C 5.0.3.0. */
-
-/* True if the arithmetic type T is an integer type. bool counts as
- an integer. */
-#define TYPE_IS_INTEGER(t) ((t) 1.5 == 1)
-
-/* True if negative values of the signed integer type T use two's
- complement, ones' complement, or signed magnitude representation,
- respectively. Much GNU code assumes two's complement, but some
- people like to be portable to all possible C hosts. */
-#define TYPE_TWOS_COMPLEMENT(t) ((t) ~ (t) 0 == (t) -1)
-#define TYPE_ONES_COMPLEMENT(t) ((t) ~ (t) 0 == 0)
-#define TYPE_SIGNED_MAGNITUDE(t) ((t) ~ (t) 0 < (t) -1)
-
-/* True if the signed integer expression E uses two's complement. */
-#define _GL_INT_TWOS_COMPLEMENT(e) (~ _GL_INT_CONVERT (e, 0) == -1)
-
-/* True if the arithmetic type T is signed. */
-#define TYPE_SIGNED(t) (! ((t) 0 < (t) -1))
-
-/* Return 1 if the integer expression E, after integer promotion, has
- a signed type. */
-#define _GL_INT_SIGNED(e) (_GL_INT_NEGATE_CONVERT (e, 1) < 0)
-
-
-/* Minimum and maximum values for integer types and expressions. These
- macros have undefined behavior if T is signed and has padding bits.
- If this is a problem for you, please let us know how to fix it for
- your host. */
-
-/* The maximum and minimum values for the integer type T. */
-#define TYPE_MINIMUM(t) \
- ((t) (! TYPE_SIGNED (t) \
- ? (t) 0 \
- : TYPE_SIGNED_MAGNITUDE (t) \
- ? ~ (t) 0 \
- : ~ TYPE_MAXIMUM (t)))
-#define TYPE_MAXIMUM(t) \
- ((t) (! TYPE_SIGNED (t) \
- ? (t) -1 \
- : ((((t) 1 << (sizeof (t) * CHAR_BIT - 2)) - 1) * 2 + 1)))
-
-/* The maximum and minimum values for the type of the expression E,
- after integer promotion. E should not have side effects. */
-#define _GL_INT_MINIMUM(e) \
- (_GL_INT_SIGNED (e) \
- ? - _GL_INT_TWOS_COMPLEMENT (e) - _GL_SIGNED_INT_MAXIMUM (e) \
- : _GL_INT_CONVERT (e, 0))
-#define _GL_INT_MAXIMUM(e) \
- (_GL_INT_SIGNED (e) \
- ? _GL_SIGNED_INT_MAXIMUM (e) \
- : _GL_INT_NEGATE_CONVERT (e, 1))
-#define _GL_SIGNED_INT_MAXIMUM(e) \
- (((_GL_INT_CONVERT (e, 1) << (sizeof ((e) + 0) * CHAR_BIT - 2)) - 1) * 2 + 1)
-
-
-/* Return 1 if the __typeof__ keyword works. This could be done by
- 'configure', but for now it's easier to do it by hand. */
-#if 2 <= __GNUC__ || 0x5110 <= __SUNPRO_C
-# define _GL_HAVE___TYPEOF__ 1
-#else
-# define _GL_HAVE___TYPEOF__ 0
-#endif
-
-/* Return 1 if the integer type or expression T might be signed. Return 0
- if it is definitely unsigned. This macro does not evaluate its argument,
- and expands to an integer constant expression. */
-#if _GL_HAVE___TYPEOF__
-# define _GL_SIGNED_TYPE_OR_EXPR(t) TYPE_SIGNED (__typeof__ (t))
-#else
-# define _GL_SIGNED_TYPE_OR_EXPR(t) 1
-#endif
-
-/* Bound on length of the string representing an unsigned integer
- value representable in B bits. log10 (2.0) < 146/485. The
- smallest value of B where this bound is not tight is 2621. */
-#define INT_BITS_STRLEN_BOUND(b) (((b) * 146 + 484) / 485)
-
-/* Bound on length of the string representing an integer type or expression T.
- Subtract 1 for the sign bit if T is signed, and then add 1 more for
- a minus sign if needed.
-
- Because _GL_SIGNED_TYPE_OR_EXPR sometimes returns 0 when its argument is
- signed, this macro may overestimate the true bound by one byte when
- applied to unsigned types of size 2, 4, 16, ... bytes. */
-#define INT_STRLEN_BOUND(t) \
- (INT_BITS_STRLEN_BOUND (sizeof (t) * CHAR_BIT \
- - _GL_SIGNED_TYPE_OR_EXPR (t)) \
- + _GL_SIGNED_TYPE_OR_EXPR (t))
-
-/* Bound on buffer size needed to represent an integer type or expression T,
- including the terminating null. */
-#define INT_BUFSIZE_BOUND(t) (INT_STRLEN_BOUND (t) + 1)
-
-
-/* Range overflow checks.
-
- The INT_<op>_RANGE_OVERFLOW macros return 1 if the corresponding C
- operators might not yield numerically correct answers due to
- arithmetic overflow. They do not rely on undefined or
- implementation-defined behavior. Their implementations are simple
- and straightforward, but they are a bit harder to use than the
- INT_<op>_OVERFLOW macros described below.
-
- Example usage:
-
- long int i = ...;
- long int j = ...;
- if (INT_MULTIPLY_RANGE_OVERFLOW (i, j, LONG_MIN, LONG_MAX))
- printf ("multiply would overflow");
- else
- printf ("product is %ld", i * j);
-
- Restrictions on *_RANGE_OVERFLOW macros:
-
- These macros do not check for all possible numerical problems or
- undefined or unspecified behavior: they do not check for division
- by zero, for bad shift counts, or for shifting negative numbers.
-
- These macros may evaluate their arguments zero or multiple times,
- so the arguments should not have side effects. The arithmetic
- arguments (including the MIN and MAX arguments) must be of the same
- integer type after the usual arithmetic conversions, and the type
- must have minimum value MIN and maximum MAX. Unsigned types should
- use a zero MIN of the proper type.
-
- These macros are tuned for constant MIN and MAX. For commutative
- operations such as A + B, they are also tuned for constant B. */
-
-/* Return 1 if A + B would overflow in [MIN,MAX] arithmetic.
- See above for restrictions. */
-#define INT_ADD_RANGE_OVERFLOW(a, b, min, max) \
- ((b) < 0 \
- ? (a) < (min) - (b) \
- : (max) - (b) < (a))
-
-/* Return 1 if A - B would overflow in [MIN,MAX] arithmetic.
- See above for restrictions. */
-#define INT_SUBTRACT_RANGE_OVERFLOW(a, b, min, max) \
- ((b) < 0 \
- ? (max) + (b) < (a) \
- : (a) < (min) + (b))
-
-/* Return 1 if - A would overflow in [MIN,MAX] arithmetic.
- See above for restrictions. */
-#define INT_NEGATE_RANGE_OVERFLOW(a, min, max) \
- ((min) < 0 \
- ? (a) < - (max) \
- : 0 < (a))
-
-/* Return 1 if A * B would overflow in [MIN,MAX] arithmetic.
- See above for restrictions. Avoid && and || as they tickle
- bugs in Sun C 5.11 2010/08/13 and other compilers; see
- <http://lists.gnu.org/archive/html/bug-gnulib/2011-05/msg00401.html>. */
-#define INT_MULTIPLY_RANGE_OVERFLOW(a, b, min, max) \
- ((b) < 0 \
- ? ((a) < 0 \
- ? (a) < (max) / (b) \
- : (b) == -1 \
- ? 0 \
- : (min) / (b) < (a)) \
- : (b) == 0 \
- ? 0 \
- : ((a) < 0 \
- ? (a) < (min) / (b) \
- : (max) / (b) < (a)))
-
-/* Return 1 if A / B would overflow in [MIN,MAX] arithmetic.
- See above for restrictions. Do not check for division by zero. */
-#define INT_DIVIDE_RANGE_OVERFLOW(a, b, min, max) \
- ((min) < 0 && (b) == -1 && (a) < - (max))
-
-/* Return 1 if A % B would overflow in [MIN,MAX] arithmetic.
- See above for restrictions. Do not check for division by zero.
- Mathematically, % should never overflow, but on x86-like hosts
- INT_MIN % -1 traps, and the C standard permits this, so treat this
- as an overflow too. */
-#define INT_REMAINDER_RANGE_OVERFLOW(a, b, min, max) \
- INT_DIVIDE_RANGE_OVERFLOW (a, b, min, max)
-
-/* Return 1 if A << B would overflow in [MIN,MAX] arithmetic.
- See above for restrictions. Here, MIN and MAX are for A only, and B need
- not be of the same type as the other arguments. The C standard says that
- behavior is undefined for shifts unless 0 <= B < wordwidth, and that when
- A is negative then A << B has undefined behavior and A >> B has
- implementation-defined behavior, but do not check these other
- restrictions. */
-#define INT_LEFT_SHIFT_RANGE_OVERFLOW(a, b, min, max) \
- ((a) < 0 \
- ? (a) < (min) >> (b) \
- : (max) >> (b) < (a))
-
-
-/* The _GL*_OVERFLOW macros have the same restrictions as the
- *_RANGE_OVERFLOW macros, except that they do not assume that operands
- (e.g., A and B) have the same type as MIN and MAX. Instead, they assume
- that the result (e.g., A + B) has that type. */
-#define _GL_ADD_OVERFLOW(a, b, min, max) \
- ((min) < 0 ? INT_ADD_RANGE_OVERFLOW (a, b, min, max) \
- : (a) < 0 ? (b) <= (a) + (b) \
- : (b) < 0 ? (a) <= (a) + (b) \
- : (a) + (b) < (b))
-#define _GL_SUBTRACT_OVERFLOW(a, b, min, max) \
- ((min) < 0 ? INT_SUBTRACT_RANGE_OVERFLOW (a, b, min, max) \
- : (a) < 0 ? 1 \
- : (b) < 0 ? (a) - (b) <= (a) \
- : (a) < (b))
-#define _GL_MULTIPLY_OVERFLOW(a, b, min, max) \
- (((min) == 0 && (((a) < 0 && 0 < (b)) || ((b) < 0 && 0 < (a)))) \
- || INT_MULTIPLY_RANGE_OVERFLOW (a, b, min, max))
-#define _GL_DIVIDE_OVERFLOW(a, b, min, max) \
- ((min) < 0 ? (b) == _GL_INT_NEGATE_CONVERT (min, 1) && (a) < - (max) \
- : (a) < 0 ? (b) <= (a) + (b) - 1 \
- : (b) < 0 && (a) + (b) <= (a))
-#define _GL_REMAINDER_OVERFLOW(a, b, min, max) \
- ((min) < 0 ? (b) == _GL_INT_NEGATE_CONVERT (min, 1) && (a) < - (max) \
- : (a) < 0 ? (a) % (b) != ((max) - (b) + 1) % (b) \
- : (b) < 0 && ! _GL_UNSIGNED_NEG_MULTIPLE (a, b, max))
-
-/* Return a nonzero value if A is a mathematical multiple of B, where
- A is unsigned, B is negative, and MAX is the maximum value of A's
- type. A's type must be the same as (A % B)'s type. Normally (A %
- -B == 0) suffices, but things get tricky if -B would overflow. */
-#define _GL_UNSIGNED_NEG_MULTIPLE(a, b, max) \
- (((b) < -_GL_SIGNED_INT_MAXIMUM (b) \
- ? (_GL_SIGNED_INT_MAXIMUM (b) == (max) \
- ? (a) \
- : (a) % (_GL_INT_CONVERT (a, _GL_SIGNED_INT_MAXIMUM (b)) + 1)) \
- : (a) % - (b)) \
- == 0)
-
-
-/* Integer overflow checks.
-
- The INT_<op>_OVERFLOW macros return 1 if the corresponding C operators
- might not yield numerically correct answers due to arithmetic overflow.
- They work correctly on all known practical hosts, and do not rely
- on undefined behavior due to signed arithmetic overflow.
-
- Example usage:
-
- long int i = ...;
- long int j = ...;
- if (INT_MULTIPLY_OVERFLOW (i, j))
- printf ("multiply would overflow");
- else
- printf ("product is %ld", i * j);
-
- These macros do not check for all possible numerical problems or
- undefined or unspecified behavior: they do not check for division
- by zero, for bad shift counts, or for shifting negative numbers.
-
- These macros may evaluate their arguments zero or multiple times, so the
- arguments should not have side effects.
-
- These macros are tuned for their last argument being a constant.
-
- Return 1 if the integer expressions A * B, A - B, -A, A * B, A / B,
- A % B, and A << B would overflow, respectively. */
-
-#define INT_ADD_OVERFLOW(a, b) \
- _GL_BINARY_OP_OVERFLOW (a, b, _GL_ADD_OVERFLOW)
-#define INT_SUBTRACT_OVERFLOW(a, b) \
- _GL_BINARY_OP_OVERFLOW (a, b, _GL_SUBTRACT_OVERFLOW)
-#define INT_NEGATE_OVERFLOW(a) \
- INT_NEGATE_RANGE_OVERFLOW (a, _GL_INT_MINIMUM (a), _GL_INT_MAXIMUM (a))
-#define INT_MULTIPLY_OVERFLOW(a, b) \
- _GL_BINARY_OP_OVERFLOW (a, b, _GL_MULTIPLY_OVERFLOW)
-#define INT_DIVIDE_OVERFLOW(a, b) \
- _GL_BINARY_OP_OVERFLOW (a, b, _GL_DIVIDE_OVERFLOW)
-#define INT_REMAINDER_OVERFLOW(a, b) \
- _GL_BINARY_OP_OVERFLOW (a, b, _GL_REMAINDER_OVERFLOW)
-#define INT_LEFT_SHIFT_OVERFLOW(a, b) \
- INT_LEFT_SHIFT_RANGE_OVERFLOW (a, b, \
- _GL_INT_MINIMUM (a), _GL_INT_MAXIMUM (a))
-
-/* Return 1 if the expression A <op> B would overflow,
- where OP_RESULT_OVERFLOW (A, B, MIN, MAX) does the actual test,
- assuming MIN and MAX are the minimum and maximum for the result type.
- Arguments should be free of side effects. */
-#define _GL_BINARY_OP_OVERFLOW(a, b, op_result_overflow) \
- op_result_overflow (a, b, \
- _GL_INT_MINIMUM (0 * (b) + (a)), \
- _GL_INT_MAXIMUM (0 * (b) + (a)))
-
-#endif /* _GL_INTPROPS_H */
+++ /dev/null
-/* Determine a canonical name for the current locale's character encoding.
-
- Copyright (C) 2000-2006, 2008-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Bruno Haible <bruno@clisp.org>. */
-
-#include <config.h>
-
-/* Specification. */
-#include "localcharset.h"
-
-#include <fcntl.h>
-#include <stddef.h>
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#if defined __APPLE__ && defined __MACH__ && HAVE_LANGINFO_CODESET
-# define DARWIN7 /* Darwin 7 or newer, i.e. MacOS X 10.3 or newer */
-#endif
-
-#if defined _WIN32 || defined __WIN32__
-# define WINDOWS_NATIVE
-#endif
-
-#if defined __EMX__
-/* Assume EMX program runs on OS/2, even if compiled under DOS. */
-# ifndef OS2
-# define OS2
-# endif
-#endif
-
-#if !defined WINDOWS_NATIVE
-# include <unistd.h>
-# if HAVE_LANGINFO_CODESET
-# include <langinfo.h>
-# else
-# if 0 /* see comment below */
-# include <locale.h>
-# endif
-# endif
-# ifdef __CYGWIN__
-# define WIN32_LEAN_AND_MEAN
-# include <windows.h>
-# endif
-#elif defined WINDOWS_NATIVE
-# define WIN32_LEAN_AND_MEAN
-# include <windows.h>
-#endif
-#if defined OS2
-# define INCL_DOS
-# include <os2.h>
-#endif
-
-#if ENABLE_RELOCATABLE
-# include "relocatable.h"
-#else
-# define relocate(pathname) (pathname)
-#endif
-
-/* Get LIBDIR. */
-#ifndef LIBDIR
-# include "configmake.h"
-#endif
-
-/* Define O_NOFOLLOW to 0 on platforms where it does not exist. */
-#ifndef O_NOFOLLOW
-# define O_NOFOLLOW 0
-#endif
-
-#if defined _WIN32 || defined __WIN32__ || defined __CYGWIN__ || defined __EMX__ || defined __DJGPP__
- /* Native Windows, Cygwin, OS/2, DOS */
-# define ISSLASH(C) ((C) == '/' || (C) == '\\')
-#endif
-
-#ifndef DIRECTORY_SEPARATOR
-# define DIRECTORY_SEPARATOR '/'
-#endif
-
-#ifndef ISSLASH
-# define ISSLASH(C) ((C) == DIRECTORY_SEPARATOR)
-#endif
-
-#if HAVE_DECL_GETC_UNLOCKED
-# undef getc
-# define getc getc_unlocked
-#endif
-
-/* The following static variable is declared 'volatile' to avoid a
- possible multithread problem in the function get_charset_aliases. If we
- are running in a threaded environment, and if two threads initialize
- 'charset_aliases' simultaneously, both will produce the same value,
- and everything will be ok if the two assignments to 'charset_aliases'
- are atomic. But I don't know what will happen if the two assignments mix. */
-#if __STDC__ != 1
-# define volatile /* empty */
-#endif
-/* Pointer to the contents of the charset.alias file, if it has already been
- read, else NULL. Its format is:
- ALIAS_1 '\0' CANONICAL_1 '\0' ... ALIAS_n '\0' CANONICAL_n '\0' '\0' */
-static const char * volatile charset_aliases;
-
-/* Return a pointer to the contents of the charset.alias file. */
-static const char *
-get_charset_aliases (void)
-{
- const char *cp;
-
- cp = charset_aliases;
- if (cp == NULL)
- {
-#if !(defined DARWIN7 || defined VMS || defined WINDOWS_NATIVE || defined __CYGWIN__)
- const char *dir;
- const char *base = "charset.alias";
- char *file_name;
-
- /* Make it possible to override the charset.alias location. This is
- necessary for running the testsuite before "make install". */
- dir = getenv ("CHARSETALIASDIR");
- if (dir == NULL || dir[0] == '\0')
- dir = relocate (LIBDIR);
-
- /* Concatenate dir and base into freshly allocated file_name. */
- {
- size_t dir_len = strlen (dir);
- size_t base_len = strlen (base);
- int add_slash = (dir_len > 0 && !ISSLASH (dir[dir_len - 1]));
- file_name = (char *) malloc (dir_len + add_slash + base_len + 1);
- if (file_name != NULL)
- {
- memcpy (file_name, dir, dir_len);
- if (add_slash)
- file_name[dir_len] = DIRECTORY_SEPARATOR;
- memcpy (file_name + dir_len + add_slash, base, base_len + 1);
- }
- }
-
- if (file_name == NULL)
- /* Out of memory. Treat the file as empty. */
- cp = "";
- else
- {
- int fd;
-
- /* Open the file. Reject symbolic links on platforms that support
- O_NOFOLLOW. This is a security feature. Without it, an attacker
- could retrieve parts of the contents (namely, the tail of the
- first line that starts with "* ") of an arbitrary file by placing
- a symbolic link to that file under the name "charset.alias" in
- some writable directory and defining the environment variable
- CHARSETALIASDIR to point to that directory. */
- fd = open (file_name,
- O_RDONLY | (HAVE_WORKING_O_NOFOLLOW ? O_NOFOLLOW : 0));
- if (fd < 0)
- /* File not found. Treat it as empty. */
- cp = "";
- else
- {
- FILE *fp;
-
- fp = fdopen (fd, "r");
- if (fp == NULL)
- {
- /* Out of memory. Treat the file as empty. */
- close (fd);
- cp = "";
- }
- else
- {
- /* Parse the file's contents. */
- char *res_ptr = NULL;
- size_t res_size = 0;
-
- for (;;)
- {
- int c;
- char buf1[50+1];
- char buf2[50+1];
- size_t l1, l2;
- char *old_res_ptr;
-
- c = getc (fp);
- if (c == EOF)
- break;
- if (c == '\n' || c == ' ' || c == '\t')
- continue;
- if (c == '#')
- {
- /* Skip comment, to end of line. */
- do
- c = getc (fp);
- while (!(c == EOF || c == '\n'));
- if (c == EOF)
- break;
- continue;
- }
- ungetc (c, fp);
- if (fscanf (fp, "%50s %50s", buf1, buf2) < 2)
- break;
- l1 = strlen (buf1);
- l2 = strlen (buf2);
- old_res_ptr = res_ptr;
- if (res_size == 0)
- {
- res_size = l1 + 1 + l2 + 1;
- res_ptr = (char *) malloc (res_size + 1);
- }
- else
- {
- res_size += l1 + 1 + l2 + 1;
- res_ptr = (char *) realloc (res_ptr, res_size + 1);
- }
- if (res_ptr == NULL)
- {
- /* Out of memory. */
- res_size = 0;
- free (old_res_ptr);
- break;
- }
- strcpy (res_ptr + res_size - (l2 + 1) - (l1 + 1), buf1);
- strcpy (res_ptr + res_size - (l2 + 1), buf2);
- }
- fclose (fp);
- if (res_size == 0)
- cp = "";
- else
- {
- *(res_ptr + res_size) = '\0';
- cp = res_ptr;
- }
- }
- }
-
- free (file_name);
- }
-
-#else
-
-# if defined DARWIN7
- /* To avoid the trouble of installing a file that is shared by many
- GNU packages -- many packaging systems have problems with this --,
- simply inline the aliases here. */
- cp = "ISO8859-1" "\0" "ISO-8859-1" "\0"
- "ISO8859-2" "\0" "ISO-8859-2" "\0"
- "ISO8859-4" "\0" "ISO-8859-4" "\0"
- "ISO8859-5" "\0" "ISO-8859-5" "\0"
- "ISO8859-7" "\0" "ISO-8859-7" "\0"
- "ISO8859-9" "\0" "ISO-8859-9" "\0"
- "ISO8859-13" "\0" "ISO-8859-13" "\0"
- "ISO8859-15" "\0" "ISO-8859-15" "\0"
- "KOI8-R" "\0" "KOI8-R" "\0"
- "KOI8-U" "\0" "KOI8-U" "\0"
- "CP866" "\0" "CP866" "\0"
- "CP949" "\0" "CP949" "\0"
- "CP1131" "\0" "CP1131" "\0"
- "CP1251" "\0" "CP1251" "\0"
- "eucCN" "\0" "GB2312" "\0"
- "GB2312" "\0" "GB2312" "\0"
- "eucJP" "\0" "EUC-JP" "\0"
- "eucKR" "\0" "EUC-KR" "\0"
- "Big5" "\0" "BIG5" "\0"
- "Big5HKSCS" "\0" "BIG5-HKSCS" "\0"
- "GBK" "\0" "GBK" "\0"
- "GB18030" "\0" "GB18030" "\0"
- "SJIS" "\0" "SHIFT_JIS" "\0"
- "ARMSCII-8" "\0" "ARMSCII-8" "\0"
- "PT154" "\0" "PT154" "\0"
- /*"ISCII-DEV" "\0" "?" "\0"*/
- "*" "\0" "UTF-8" "\0";
-# endif
-
-# if defined VMS
- /* To avoid the troubles of an extra file charset.alias_vms in the
- sources of many GNU packages, simply inline the aliases here. */
- /* The list of encodings is taken from the OpenVMS 7.3-1 documentation
- "Compaq C Run-Time Library Reference Manual for OpenVMS systems"
- section 10.7 "Handling Different Character Sets". */
- cp = "ISO8859-1" "\0" "ISO-8859-1" "\0"
- "ISO8859-2" "\0" "ISO-8859-2" "\0"
- "ISO8859-5" "\0" "ISO-8859-5" "\0"
- "ISO8859-7" "\0" "ISO-8859-7" "\0"
- "ISO8859-8" "\0" "ISO-8859-8" "\0"
- "ISO8859-9" "\0" "ISO-8859-9" "\0"
- /* Japanese */
- "eucJP" "\0" "EUC-JP" "\0"
- "SJIS" "\0" "SHIFT_JIS" "\0"
- "DECKANJI" "\0" "DEC-KANJI" "\0"
- "SDECKANJI" "\0" "EUC-JP" "\0"
- /* Chinese */
- "eucTW" "\0" "EUC-TW" "\0"
- "DECHANYU" "\0" "DEC-HANYU" "\0"
- "DECHANZI" "\0" "GB2312" "\0"
- /* Korean */
- "DECKOREAN" "\0" "EUC-KR" "\0";
-# endif
-
-# if defined WINDOWS_NATIVE || defined __CYGWIN__
- /* To avoid the troubles of installing a separate file in the same
- directory as the DLL and of retrieving the DLL's directory at
- runtime, simply inline the aliases here. */
-
- cp = "CP936" "\0" "GBK" "\0"
- "CP1361" "\0" "JOHAB" "\0"
- "CP20127" "\0" "ASCII" "\0"
- "CP20866" "\0" "KOI8-R" "\0"
- "CP20936" "\0" "GB2312" "\0"
- "CP21866" "\0" "KOI8-RU" "\0"
- "CP28591" "\0" "ISO-8859-1" "\0"
- "CP28592" "\0" "ISO-8859-2" "\0"
- "CP28593" "\0" "ISO-8859-3" "\0"
- "CP28594" "\0" "ISO-8859-4" "\0"
- "CP28595" "\0" "ISO-8859-5" "\0"
- "CP28596" "\0" "ISO-8859-6" "\0"
- "CP28597" "\0" "ISO-8859-7" "\0"
- "CP28598" "\0" "ISO-8859-8" "\0"
- "CP28599" "\0" "ISO-8859-9" "\0"
- "CP28605" "\0" "ISO-8859-15" "\0"
- "CP38598" "\0" "ISO-8859-8" "\0"
- "CP51932" "\0" "EUC-JP" "\0"
- "CP51936" "\0" "GB2312" "\0"
- "CP51949" "\0" "EUC-KR" "\0"
- "CP51950" "\0" "EUC-TW" "\0"
- "CP54936" "\0" "GB18030" "\0"
- "CP65001" "\0" "UTF-8" "\0";
-# endif
-#endif
-
- charset_aliases = cp;
- }
-
- return cp;
-}
-
-/* Determine the current locale's character encoding, and canonicalize it
- into one of the canonical names listed in config.charset.
- The result must not be freed; it is statically allocated.
- If the canonical name cannot be determined, the result is a non-canonical
- name. */
-
-#ifdef STATIC
-STATIC
-#endif
-const char *
-locale_charset (void)
-{
- const char *codeset;
- const char *aliases;
-
-#if !(defined WINDOWS_NATIVE || defined OS2)
-
-# if HAVE_LANGINFO_CODESET
-
- /* Most systems support nl_langinfo (CODESET) nowadays. */
- codeset = nl_langinfo (CODESET);
-
-# ifdef __CYGWIN__
- /* Cygwin < 1.7 does not have locales. nl_langinfo (CODESET) always
- returns "US-ASCII". Return the suffix of the locale name from the
- environment variables (if present) or the codepage as a number. */
- if (codeset != NULL && strcmp (codeset, "US-ASCII") == 0)
- {
- const char *locale;
- static char buf[2 + 10 + 1];
-
- locale = getenv ("LC_ALL");
- if (locale == NULL || locale[0] == '\0')
- {
- locale = getenv ("LC_CTYPE");
- if (locale == NULL || locale[0] == '\0')
- locale = getenv ("LANG");
- }
- if (locale != NULL && locale[0] != '\0')
- {
- /* If the locale name contains an encoding after the dot, return
- it. */
- const char *dot = strchr (locale, '.');
-
- if (dot != NULL)
- {
- const char *modifier;
-
- dot++;
- /* Look for the possible @... trailer and remove it, if any. */
- modifier = strchr (dot, '@');
- if (modifier == NULL)
- return dot;
- if (modifier - dot < sizeof (buf))
- {
- memcpy (buf, dot, modifier - dot);
- buf [modifier - dot] = '\0';
- return buf;
- }
- }
- }
-
- /* The Windows API has a function returning the locale's codepage as a
- number: GetACP(). This encoding is used by Cygwin, unless the user
- has set the environment variable CYGWIN=codepage:oem (which very few
- people do).
- Output directed to console windows needs to be converted (to
- GetOEMCP() if the console is using a raster font, or to
- GetConsoleOutputCP() if it is using a TrueType font). Cygwin does
- this conversion transparently (see winsup/cygwin/fhandler_console.cc),
- converting to GetConsoleOutputCP(). This leads to correct results,
- except when SetConsoleOutputCP has been called and a raster font is
- in use. */
- sprintf (buf, "CP%u", GetACP ());
- codeset = buf;
- }
-# endif
-
-# else
-
- /* On old systems which lack it, use setlocale or getenv. */
- const char *locale = NULL;
-
- /* But most old systems don't have a complete set of locales. Some
- (like SunOS 4 or DJGPP) have only the C locale. Therefore we don't
- use setlocale here; it would return "C" when it doesn't support the
- locale name the user has set. */
-# if 0
- locale = setlocale (LC_CTYPE, NULL);
-# endif
- if (locale == NULL || locale[0] == '\0')
- {
- locale = getenv ("LC_ALL");
- if (locale == NULL || locale[0] == '\0')
- {
- locale = getenv ("LC_CTYPE");
- if (locale == NULL || locale[0] == '\0')
- locale = getenv ("LANG");
- }
- }
-
- /* On some old systems, one used to set locale = "iso8859_1". On others,
- you set it to "language_COUNTRY.charset". In any case, we resolve it
- through the charset.alias file. */
- codeset = locale;
-
-# endif
-
-#elif defined WINDOWS_NATIVE
-
- static char buf[2 + 10 + 1];
-
- /* The Windows API has a function returning the locale's codepage as a
- number: GetACP().
- When the output goes to a console window, it needs to be provided in
- GetOEMCP() encoding if the console is using a raster font, or in
- GetConsoleOutputCP() encoding if it is using a TrueType font.
- But in GUI programs and for output sent to files and pipes, GetACP()
- encoding is the best bet. */
- sprintf (buf, "CP%u", GetACP ());
- codeset = buf;
-
-#elif defined OS2
-
- const char *locale;
- static char buf[2 + 10 + 1];
- ULONG cp[3];
- ULONG cplen;
-
- /* Allow user to override the codeset, as set in the operating system,
- with standard language environment variables. */
- locale = getenv ("LC_ALL");
- if (locale == NULL || locale[0] == '\0')
- {
- locale = getenv ("LC_CTYPE");
- if (locale == NULL || locale[0] == '\0')
- locale = getenv ("LANG");
- }
- if (locale != NULL && locale[0] != '\0')
- {
- /* If the locale name contains an encoding after the dot, return it. */
- const char *dot = strchr (locale, '.');
-
- if (dot != NULL)
- {
- const char *modifier;
-
- dot++;
- /* Look for the possible @... trailer and remove it, if any. */
- modifier = strchr (dot, '@');
- if (modifier == NULL)
- return dot;
- if (modifier - dot < sizeof (buf))
- {
- memcpy (buf, dot, modifier - dot);
- buf [modifier - dot] = '\0';
- return buf;
- }
- }
-
- /* Resolve through the charset.alias file. */
- codeset = locale;
- }
- else
- {
- /* OS/2 has a function returning the locale's codepage as a number. */
- if (DosQueryCp (sizeof (cp), cp, &cplen))
- codeset = "";
- else
- {
- sprintf (buf, "CP%u", cp[0]);
- codeset = buf;
- }
- }
-
-#endif
-
- if (codeset == NULL)
- /* The canonical name cannot be determined. */
- codeset = "";
-
- /* Resolve alias. */
- for (aliases = get_charset_aliases ();
- *aliases != '\0';
- aliases += strlen (aliases) + 1, aliases += strlen (aliases) + 1)
- if (strcmp (codeset, aliases) == 0
- || (aliases[0] == '*' && aliases[1] == '\0'))
- {
- codeset = aliases + strlen (aliases) + 1;
- break;
- }
-
- /* Don't return an empty string. GNU libc and GNU libiconv interpret
- the empty string as denoting "the locale's character encoding",
- thus GNU libiconv would call this function a second time. */
- if (codeset[0] == '\0')
- codeset = "ASCII";
-
- return codeset;
-}
+++ /dev/null
-/* Determine a canonical name for the current locale's character encoding.
- Copyright (C) 2000-2003, 2009-2012 Free Software Foundation, Inc.
- This file is part of the GNU CHARSET Library.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _LOCALCHARSET_H
-#define _LOCALCHARSET_H
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* Determine the current locale's character encoding, and canonicalize it
- into one of the canonical names listed in config.charset.
- The result must not be freed; it is statically allocated.
- If the canonical name cannot be determined, the result is a non-canonical
- name. */
-extern const char * locale_charset (void);
-
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* _LOCALCHARSET_H */
+++ /dev/null
-/* Convert multibyte character to wide character.
- Copyright (C) 1999-2002, 2005-2012 Free Software Foundation, Inc.
- Written by Bruno Haible <bruno@clisp.org>, 2008.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-/* Specification. */
-#include <wchar.h>
-
-#if GNULIB_defined_mbstate_t
-/* Implement mbrtowc() on top of mbtowc(). */
-
-# include <errno.h>
-# include <stdlib.h>
-
-# include "localcharset.h"
-# include "streq.h"
-# include "verify.h"
-
-
-verify (sizeof (mbstate_t) >= 4);
-
-static char internal_state[4];
-
-size_t
-mbrtowc (wchar_t *pwc, const char *s, size_t n, mbstate_t *ps)
-{
- char *pstate = (char *)ps;
-
- if (s == NULL)
- {
- pwc = NULL;
- s = "";
- n = 1;
- }
-
- if (n == 0)
- return (size_t)(-2);
-
- /* Here n > 0. */
-
- if (pstate == NULL)
- pstate = internal_state;
-
- {
- size_t nstate = pstate[0];
- char buf[4];
- const char *p;
- size_t m;
-
- switch (nstate)
- {
- case 0:
- p = s;
- m = n;
- break;
- case 3:
- buf[2] = pstate[3];
- /*FALLTHROUGH*/
- case 2:
- buf[1] = pstate[2];
- /*FALLTHROUGH*/
- case 1:
- buf[0] = pstate[1];
- p = buf;
- m = nstate;
- buf[m++] = s[0];
- if (n >= 2 && m < 4)
- {
- buf[m++] = s[1];
- if (n >= 3 && m < 4)
- buf[m++] = s[2];
- }
- break;
- default:
- errno = EINVAL;
- return (size_t)(-1);
- }
-
- /* Here m > 0. */
-
-# if __GLIBC__ || defined __UCLIBC__
- /* Work around bug <http://sourceware.org/bugzilla/show_bug.cgi?id=9674> */
- mbtowc (NULL, NULL, 0);
-# endif
- {
- int res = mbtowc (pwc, p, m);
-
- if (res >= 0)
- {
- if (pwc != NULL && ((*pwc == 0) != (res == 0)))
- abort ();
- if (nstate >= (res > 0 ? res : 1))
- abort ();
- res -= nstate;
- pstate[0] = 0;
- return res;
- }
-
- /* mbtowc does not distinguish between invalid and incomplete multibyte
- sequences. But mbrtowc needs to make this distinction.
- There are two possible approaches:
- - Use iconv() and its return value.
- - Use built-in knowledge about the possible encodings.
- Given the low quality of implementation of iconv() on the systems that
- lack mbrtowc(), we use the second approach.
- The possible encodings are:
- - 8-bit encodings,
- - EUC-JP, EUC-KR, GB2312, EUC-TW, BIG5, GB18030, SJIS,
- - UTF-8.
- Use specialized code for each. */
- if (m >= 4 || m >= MB_CUR_MAX)
- goto invalid;
- /* Here MB_CUR_MAX > 1 and 0 < m < 4. */
- {
- const char *encoding = locale_charset ();
-
- if (STREQ_OPT (encoding, "UTF-8", 'U', 'T', 'F', '-', '8', 0, 0, 0, 0))
- {
- /* Cf. unistr/u8-mblen.c. */
- unsigned char c = (unsigned char) p[0];
-
- if (c >= 0xc2)
- {
- if (c < 0xe0)
- {
- if (m == 1)
- goto incomplete;
- }
- else if (c < 0xf0)
- {
- if (m == 1)
- goto incomplete;
- if (m == 2)
- {
- unsigned char c2 = (unsigned char) p[1];
-
- if ((c2 ^ 0x80) < 0x40
- && (c >= 0xe1 || c2 >= 0xa0)
- && (c != 0xed || c2 < 0xa0))
- goto incomplete;
- }
- }
- else if (c <= 0xf4)
- {
- if (m == 1)
- goto incomplete;
- else /* m == 2 || m == 3 */
- {
- unsigned char c2 = (unsigned char) p[1];
-
- if ((c2 ^ 0x80) < 0x40
- && (c >= 0xf1 || c2 >= 0x90)
- && (c < 0xf4 || (c == 0xf4 && c2 < 0x90)))
- {
- if (m == 2)
- goto incomplete;
- else /* m == 3 */
- {
- unsigned char c3 = (unsigned char) p[2];
-
- if ((c3 ^ 0x80) < 0x40)
- goto incomplete;
- }
- }
- }
- }
- }
- goto invalid;
- }
-
- /* As a reference for this code, you can use the GNU libiconv
- implementation. Look for uses of the RET_TOOFEW macro. */
-
- if (STREQ_OPT (encoding,
- "EUC-JP", 'E', 'U', 'C', '-', 'J', 'P', 0, 0, 0))
- {
- if (m == 1)
- {
- unsigned char c = (unsigned char) p[0];
-
- if ((c >= 0xa1 && c < 0xff) || c == 0x8e || c == 0x8f)
- goto incomplete;
- }
- if (m == 2)
- {
- unsigned char c = (unsigned char) p[0];
-
- if (c == 0x8f)
- {
- unsigned char c2 = (unsigned char) p[1];
-
- if (c2 >= 0xa1 && c2 < 0xff)
- goto incomplete;
- }
- }
- goto invalid;
- }
- if (STREQ_OPT (encoding,
- "EUC-KR", 'E', 'U', 'C', '-', 'K', 'R', 0, 0, 0)
- || STREQ_OPT (encoding,
- "GB2312", 'G', 'B', '2', '3', '1', '2', 0, 0, 0)
- || STREQ_OPT (encoding,
- "BIG5", 'B', 'I', 'G', '5', 0, 0, 0, 0, 0))
- {
- if (m == 1)
- {
- unsigned char c = (unsigned char) p[0];
-
- if (c >= 0xa1 && c < 0xff)
- goto incomplete;
- }
- goto invalid;
- }
- if (STREQ_OPT (encoding,
- "EUC-TW", 'E', 'U', 'C', '-', 'T', 'W', 0, 0, 0))
- {
- if (m == 1)
- {
- unsigned char c = (unsigned char) p[0];
-
- if ((c >= 0xa1 && c < 0xff) || c == 0x8e)
- goto incomplete;
- }
- else /* m == 2 || m == 3 */
- {
- unsigned char c = (unsigned char) p[0];
-
- if (c == 0x8e)
- goto incomplete;
- }
- goto invalid;
- }
- if (STREQ_OPT (encoding,
- "GB18030", 'G', 'B', '1', '8', '0', '3', '0', 0, 0))
- {
- if (m == 1)
- {
- unsigned char c = (unsigned char) p[0];
-
- if ((c >= 0x90 && c <= 0xe3) || (c >= 0xf8 && c <= 0xfe))
- goto incomplete;
- }
- else /* m == 2 || m == 3 */
- {
- unsigned char c = (unsigned char) p[0];
-
- if (c >= 0x90 && c <= 0xe3)
- {
- unsigned char c2 = (unsigned char) p[1];
-
- if (c2 >= 0x30 && c2 <= 0x39)
- {
- if (m == 2)
- goto incomplete;
- else /* m == 3 */
- {
- unsigned char c3 = (unsigned char) p[2];
-
- if (c3 >= 0x81 && c3 <= 0xfe)
- goto incomplete;
- }
- }
- }
- }
- goto invalid;
- }
- if (STREQ_OPT (encoding, "SJIS", 'S', 'J', 'I', 'S', 0, 0, 0, 0, 0))
- {
- if (m == 1)
- {
- unsigned char c = (unsigned char) p[0];
-
- if ((c >= 0x81 && c <= 0x9f) || (c >= 0xe0 && c <= 0xea)
- || (c >= 0xf0 && c <= 0xf9))
- goto incomplete;
- }
- goto invalid;
- }
-
- /* An unknown multibyte encoding. */
- goto incomplete;
- }
-
- incomplete:
- {
- size_t k = nstate;
- /* Here 0 <= k < m < 4. */
- pstate[++k] = s[0];
- if (k < m)
- {
- pstate[++k] = s[1];
- if (k < m)
- pstate[++k] = s[2];
- }
- if (k != m)
- abort ();
- }
- pstate[0] = m;
- return (size_t)(-2);
-
- invalid:
- errno = EILSEQ;
- /* The conversion state is undefined, says POSIX. */
- return (size_t)(-1);
- }
- }
-}
-
-#else
-/* Override the system's mbrtowc() function. */
-
-# undef mbrtowc
-
-size_t
-rpl_mbrtowc (wchar_t *pwc, const char *s, size_t n, mbstate_t *ps)
-{
-# if MBRTOWC_NULL_ARG2_BUG || MBRTOWC_RETVAL_BUG
- if (s == NULL)
- {
- pwc = NULL;
- s = "";
- n = 1;
- }
-# endif
-
-# if MBRTOWC_RETVAL_BUG
- {
- static mbstate_t internal_state;
-
- /* Override mbrtowc's internal state. We cannot call mbsinit() on the
- hidden internal state, but we can call it on our variable. */
- if (ps == NULL)
- ps = &internal_state;
-
- if (!mbsinit (ps))
- {
- /* Parse the rest of the multibyte character byte for byte. */
- size_t count = 0;
- for (; n > 0; s++, n--)
- {
- wchar_t wc;
- size_t ret = mbrtowc (&wc, s, 1, ps);
-
- if (ret == (size_t)(-1))
- return (size_t)(-1);
- count++;
- if (ret != (size_t)(-2))
- {
- /* The multibyte character has been completed. */
- if (pwc != NULL)
- *pwc = wc;
- return (wc == 0 ? 0 : count);
- }
- }
- return (size_t)(-2);
- }
- }
-# endif
-
-# if MBRTOWC_NUL_RETVAL_BUG
- {
- wchar_t wc;
- size_t ret = mbrtowc (&wc, s, n, ps);
-
- if (ret != (size_t)(-1) && ret != (size_t)(-2))
- {
- if (pwc != NULL)
- *pwc = wc;
- if (wc == 0)
- ret = 0;
- }
- return ret;
- }
-# else
- {
-# if MBRTOWC_NULL_ARG1_BUG
- wchar_t dummy;
-
- if (pwc == NULL)
- pwc = &dummy;
-# endif
-
- return mbrtowc (pwc, s, n, ps);
- }
-# endif
-}
-
-#endif
+++ /dev/null
-/* Test for initial conversion state.
- Copyright (C) 2008-2012 Free Software Foundation, Inc.
- Written by Bruno Haible <bruno@clisp.org>, 2008.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-/* Specification. */
-#include <wchar.h>
-
-#include "verify.h"
-
-#if (defined _WIN32 || defined __WIN32__) && !defined __CYGWIN__
-
-/* On native Windows, 'mbstate_t' is defined as 'int'. */
-
-int
-mbsinit (const mbstate_t *ps)
-{
- return ps == NULL || *ps == 0;
-}
-
-#else
-
-/* Platforms that lack mbsinit() also lack mbrlen(), mbrtowc(), mbsrtowcs()
- and wcrtomb(), wcsrtombs().
- We assume that
- - sizeof (mbstate_t) >= 4,
- - only stateless encodings are supported (such as UTF-8 and EUC-JP, but
- not ISO-2022 variants),
- - for each encoding, the number of bytes for a wide character is <= 4.
- (This maximum is attained for UTF-8, GB18030, EUC-TW.)
- We define the meaning of mbstate_t as follows:
- - In mb -> wc direction, mbstate_t's first byte contains the number of
- buffered bytes (in the range 0..3), followed by up to 3 buffered bytes.
- - In wc -> mb direction, mbstate_t contains no information. In other
- words, it is always in the initial state. */
-
-verify (sizeof (mbstate_t) >= 4);
-
-int
-mbsinit (const mbstate_t *ps)
-{
- const char *pstate = (const char *)ps;
-
- return pstate == NULL || pstate[0] == 0;
-}
-
-#endif
+++ /dev/null
-/* Invalid parameter handler for MSVC runtime libraries.
- Copyright (C) 2011-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-/* Specification. */
-#include "msvc-inval.h"
-
-#if HAVE_MSVC_INVALID_PARAMETER_HANDLER \
- && !(MSVC_INVALID_PARAMETER_HANDLING == SANE_LIBRARY_HANDLING)
-
-/* Get _invalid_parameter_handler type and _set_invalid_parameter_handler
- declaration. */
-# include <stdlib.h>
-
-# if MSVC_INVALID_PARAMETER_HANDLING == DEFAULT_HANDLING
-
-static void cdecl
-gl_msvc_invalid_parameter_handler (const wchar_t *expression,
- const wchar_t *function,
- const wchar_t *file,
- unsigned int line,
- uintptr_t dummy)
-{
-}
-
-# else
-
-/* Get declarations of the native Windows API functions. */
-# define WIN32_LEAN_AND_MEAN
-# include <windows.h>
-
-# if defined _MSC_VER
-
-static void cdecl
-gl_msvc_invalid_parameter_handler (const wchar_t *expression,
- const wchar_t *function,
- const wchar_t *file,
- unsigned int line,
- uintptr_t dummy)
-{
- RaiseException (STATUS_GNULIB_INVALID_PARAMETER, 0, 0, NULL);
-}
-
-# else
-
-/* An index to thread-local storage. */
-static DWORD tls_index;
-static int tls_initialized /* = 0 */;
-
-/* Used as a fallback only. */
-static struct gl_msvc_inval_per_thread not_per_thread;
-
-struct gl_msvc_inval_per_thread *
-gl_msvc_inval_current (void)
-{
- if (!tls_initialized)
- {
- tls_index = TlsAlloc ();
- tls_initialized = 1;
- }
- if (tls_index == TLS_OUT_OF_INDEXES)
- /* TlsAlloc had failed. */
- return ¬_per_thread;
- else
- {
- struct gl_msvc_inval_per_thread *pointer =
- (struct gl_msvc_inval_per_thread *) TlsGetValue (tls_index);
- if (pointer == NULL)
- {
- /* First call. Allocate a new 'struct gl_msvc_inval_per_thread'. */
- pointer =
- (struct gl_msvc_inval_per_thread *)
- malloc (sizeof (struct gl_msvc_inval_per_thread));
- if (pointer == NULL)
- /* Could not allocate memory. Use the global storage. */
- pointer = ¬_per_thread;
- TlsSetValue (tls_index, pointer);
- }
- return pointer;
- }
-}
-
-static void cdecl
-gl_msvc_invalid_parameter_handler (const wchar_t *expression,
- const wchar_t *function,
- const wchar_t *file,
- unsigned int line,
- uintptr_t dummy)
-{
- struct gl_msvc_inval_per_thread *current = gl_msvc_inval_current ();
- if (current->restart_valid)
- longjmp (current->restart, 1);
- else
- /* An invalid parameter notification from outside the gnulib code.
- Give the caller a chance to intervene. */
- RaiseException (STATUS_GNULIB_INVALID_PARAMETER, 0, 0, NULL);
-}
-
-# endif
-
-# endif
-
-static int gl_msvc_inval_initialized /* = 0 */;
-
-void
-gl_msvc_inval_ensure_handler (void)
-{
- if (gl_msvc_inval_initialized == 0)
- {
- _set_invalid_parameter_handler (gl_msvc_invalid_parameter_handler);
- gl_msvc_inval_initialized = 1;
- }
-}
-
-#endif
+++ /dev/null
-/* Invalid parameter handler for MSVC runtime libraries.
- Copyright (C) 2011-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _MSVC_INVAL_H
-#define _MSVC_INVAL_H
-
-/* With MSVC runtime libraries with the "invalid parameter handler" concept,
- functions like fprintf(), dup2(), or close() crash when the caller passes
- an invalid argument. But POSIX wants error codes (such as EINVAL or EBADF)
- instead.
- This file defines macros that turn such an invalid parameter notification
- into a non-local exit. An error code can then be produced at the target
- of this exit. You can thus write code like
-
- TRY_MSVC_INVAL
- {
- <Code that can trigger an invalid parameter notification
- but does not do 'return', 'break', 'continue', nor 'goto'.>
- }
- CATCH_MSVC_INVAL
- {
- <Code that handles an invalid parameter notification
- but does not do 'return', 'break', 'continue', nor 'goto'.>
- }
- DONE_MSVC_INVAL;
-
- This entire block expands to a single statement.
-
- The handling of invalid parameters can be done in three ways:
-
- * The default way, which is reasonable for programs (not libraries):
- AC_DEFINE([MSVC_INVALID_PARAMETER_HANDLING], [DEFAULT_HANDLING])
-
- * The way for libraries that make "hairy" calls (like close(-1), or
- fclose(fp) where fileno(fp) is closed, or simply getdtablesize()):
- AC_DEFINE([MSVC_INVALID_PARAMETER_HANDLING], [HAIRY_LIBRARY_HANDLING])
-
- * The way for libraries that make no "hairy" calls:
- AC_DEFINE([MSVC_INVALID_PARAMETER_HANDLING], [SANE_LIBRARY_HANDLING])
- */
-
-#define DEFAULT_HANDLING 0
-#define HAIRY_LIBRARY_HANDLING 1
-#define SANE_LIBRARY_HANDLING 2
-
-#if HAVE_MSVC_INVALID_PARAMETER_HANDLER \
- && !(MSVC_INVALID_PARAMETER_HANDLING == SANE_LIBRARY_HANDLING)
-/* A native Windows platform with the "invalid parameter handler" concept,
- and either DEFAULT_HANDLING or HAIRY_LIBRARY_HANDLING. */
-
-# if MSVC_INVALID_PARAMETER_HANDLING == DEFAULT_HANDLING
-/* Default handling. */
-
-# ifdef __cplusplus
-extern "C" {
-# endif
-
-/* Ensure that the invalid parameter handler in installed that just returns.
- Because we assume no other part of the program installs a different
- invalid parameter handler, this solution is multithread-safe. */
-extern void gl_msvc_inval_ensure_handler (void);
-
-# ifdef __cplusplus
-}
-# endif
-
-# define TRY_MSVC_INVAL \
- do \
- { \
- gl_msvc_inval_ensure_handler (); \
- if (1)
-# define CATCH_MSVC_INVAL \
- else
-# define DONE_MSVC_INVAL \
- } \
- while (0)
-
-# else
-/* Handling for hairy libraries. */
-
-# include <excpt.h>
-
-/* Gnulib can define its own status codes, as described in the page
- "Raising Software Exceptions" on microsoft.com
- <http://msdn.microsoft.com/en-us/library/het71c37.aspx>.
- Our status codes are composed of
- - 0xE0000000, mandatory for all user-defined status codes,
- - 0x474E550, a API identifier ("GNU"),
- - 0, 1, 2, ..., used to distinguish different status codes from the
- same API. */
-# define STATUS_GNULIB_INVALID_PARAMETER (0xE0000000 + 0x474E550 + 0)
-
-# if defined _MSC_VER
-/* A compiler that supports __try/__except, as described in the page
- "try-except statement" on microsoft.com
- <http://msdn.microsoft.com/en-us/library/s58ftw19.aspx>.
- With __try/__except, we can use the multithread-safe exception handling. */
-
-# ifdef __cplusplus
-extern "C" {
-# endif
-
-/* Ensure that the invalid parameter handler in installed that raises a
- software exception with code STATUS_GNULIB_INVALID_PARAMETER.
- Because we assume no other part of the program installs a different
- invalid parameter handler, this solution is multithread-safe. */
-extern void gl_msvc_inval_ensure_handler (void);
-
-# ifdef __cplusplus
-}
-# endif
-
-# define TRY_MSVC_INVAL \
- do \
- { \
- gl_msvc_inval_ensure_handler (); \
- __try
-# define CATCH_MSVC_INVAL \
- __except (GetExceptionCode () == STATUS_GNULIB_INVALID_PARAMETER \
- ? EXCEPTION_EXECUTE_HANDLER \
- : EXCEPTION_CONTINUE_SEARCH)
-# define DONE_MSVC_INVAL \
- } \
- while (0)
-
-# else
-/* Any compiler.
- We can only use setjmp/longjmp. */
-
-# include <setjmp.h>
-
-# ifdef __cplusplus
-extern "C" {
-# endif
-
-struct gl_msvc_inval_per_thread
-{
- /* The restart that will resume execution at the code between
- CATCH_MSVC_INVAL and DONE_MSVC_INVAL. It is enabled only between
- TRY_MSVC_INVAL and CATCH_MSVC_INVAL. */
- jmp_buf restart;
-
- /* Tells whether the contents of restart is valid. */
- int restart_valid;
-};
-
-/* Ensure that the invalid parameter handler in installed that passes
- control to the gl_msvc_inval_restart if it is valid, or raises a
- software exception with code STATUS_GNULIB_INVALID_PARAMETER otherwise.
- Because we assume no other part of the program installs a different
- invalid parameter handler, this solution is multithread-safe. */
-extern void gl_msvc_inval_ensure_handler (void);
-
-/* Return a pointer to the per-thread data for the current thread. */
-extern struct gl_msvc_inval_per_thread *gl_msvc_inval_current (void);
-
-# ifdef __cplusplus
-}
-# endif
-
-# define TRY_MSVC_INVAL \
- do \
- { \
- struct gl_msvc_inval_per_thread *msvc_inval_current; \
- gl_msvc_inval_ensure_handler (); \
- msvc_inval_current = gl_msvc_inval_current (); \
- /* First, initialize gl_msvc_inval_restart. */ \
- if (setjmp (msvc_inval_current->restart) == 0) \
- { \
- /* Then, mark it as valid. */ \
- msvc_inval_current->restart_valid = 1;
-# define CATCH_MSVC_INVAL \
- /* Execution completed. \
- Mark gl_msvc_inval_restart as invalid. */ \
- msvc_inval_current->restart_valid = 0; \
- } \
- else \
- { \
- /* Execution triggered an invalid parameter notification. \
- Mark gl_msvc_inval_restart as invalid. */ \
- msvc_inval_current->restart_valid = 0;
-# define DONE_MSVC_INVAL \
- } \
- } \
- while (0)
-
-# endif
-
-# endif
-
-#else
-/* A platform that does not need to the invalid parameter handler,
- or when SANE_LIBRARY_HANDLING is desired. */
-
-/* The braces here avoid GCC warnings like
- "warning: suggest explicit braces to avoid ambiguous 'else'". */
-# define TRY_MSVC_INVAL \
- do \
- { \
- if (1)
-# define CATCH_MSVC_INVAL \
- else
-# define DONE_MSVC_INVAL \
- } \
- while (0)
-
-#endif
-
-#endif /* _MSVC_INVAL_H */
+++ /dev/null
-/* Wrappers that don't throw invalid parameter notifications
- with MSVC runtime libraries.
- Copyright (C) 2011-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-/* Specification. */
-#include "msvc-nothrow.h"
-
-/* Get declarations of the native Windows API functions. */
-#define WIN32_LEAN_AND_MEAN
-#include <windows.h>
-
-#include "msvc-inval.h"
-
-#undef _get_osfhandle
-
-#if HAVE_MSVC_INVALID_PARAMETER_HANDLER
-intptr_t
-_gl_nothrow_get_osfhandle (int fd)
-{
- intptr_t result;
-
- TRY_MSVC_INVAL
- {
- result = _get_osfhandle (fd);
- }
- CATCH_MSVC_INVAL
- {
- result = (intptr_t) INVALID_HANDLE_VALUE;
- }
- DONE_MSVC_INVAL;
-
- return result;
-}
-#endif
+++ /dev/null
-/* Wrappers that don't throw invalid parameter notifications
- with MSVC runtime libraries.
- Copyright (C) 2011-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _MSVC_NOTHROW_H
-#define _MSVC_NOTHROW_H
-
-/* With MSVC runtime libraries with the "invalid parameter handler" concept,
- functions like fprintf(), dup2(), or close() crash when the caller passes
- an invalid argument. But POSIX wants error codes (such as EINVAL or EBADF)
- instead.
- This file defines wrappers that turn such an invalid parameter notification
- into an error code. */
-
-#if (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
-
-/* Get original declaration of _get_osfhandle. */
-# include <io.h>
-
-# if HAVE_MSVC_INVALID_PARAMETER_HANDLER
-
-/* Override _get_osfhandle. */
-extern intptr_t _gl_nothrow_get_osfhandle (int fd);
-# define _get_osfhandle _gl_nothrow_get_osfhandle
-
-# endif
-
-#endif
-
-#endif /* _MSVC_NOTHROW_H */
+++ /dev/null
-/* Program name management.
- Copyright (C) 2001-2003, 2005-2012 Free Software Foundation, Inc.
- Written by Bruno Haible <bruno@clisp.org>, 2001.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-
-#include <config.h>
-
-/* Specification. */
-#undef ENABLE_RELOCATABLE /* avoid defining set_program_name as a macro */
-#include "progname.h"
-
-#include <errno.h> /* get program_invocation_name declaration */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-
-/* String containing name the program is called with.
- To be initialized by main(). */
-const char *program_name = NULL;
-
-/* Set program_name, based on argv[0].
- argv0 must be a string allocated with indefinite extent, and must not be
- modified after this call. */
-void
-set_program_name (const char *argv0)
-{
- /* libtool creates a temporary executable whose name is sometimes prefixed
- with "lt-" (depends on the platform). It also makes argv[0] absolute.
- But the name of the temporary executable is a detail that should not be
- visible to the end user and to the test suite.
- Remove this "<dirname>/.libs/" or "<dirname>/.libs/lt-" prefix here. */
- const char *slash;
- const char *base;
-
- /* Sanity check. POSIX requires the invoking process to pass a non-NULL
- argv[0]. */
- if (argv0 == NULL)
- {
- /* It's a bug in the invoking program. Help diagnosing it. */
- fputs ("A NULL argv[0] was passed through an exec system call.\n",
- stderr);
- abort ();
- }
-
- slash = strrchr (argv0, '/');
- base = (slash != NULL ? slash + 1 : argv0);
- if (base - argv0 >= 7 && strncmp (base - 7, "/.libs/", 7) == 0)
- {
- argv0 = base;
- if (strncmp (base, "lt-", 3) == 0)
- {
- argv0 = base + 3;
- /* On glibc systems, remove the "lt-" prefix from the variable
- program_invocation_short_name. */
-#if HAVE_DECL_PROGRAM_INVOCATION_SHORT_NAME
- program_invocation_short_name = (char *) argv0;
-#endif
- }
- }
-
- /* But don't strip off a leading <dirname>/ in general, because when the user
- runs
- /some/hidden/place/bin/cp foo foo
- he should get the error message
- /some/hidden/place/bin/cp: `foo' and `foo' are the same file
- not
- cp: `foo' and `foo' are the same file
- */
-
- program_name = argv0;
-
- /* On glibc systems, the error() function comes from libc and uses the
- variable program_invocation_name, not program_name. So set this variable
- as well. */
-#if HAVE_DECL_PROGRAM_INVOCATION_NAME
- program_invocation_name = (char *) argv0;
-#endif
-}
+++ /dev/null
-/* Program name management.
- Copyright (C) 2001-2004, 2006, 2009-2012 Free Software Foundation, Inc.
- Written by Bruno Haible <bruno@clisp.org>, 2001.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _PROGNAME_H
-#define _PROGNAME_H
-
-/* Programs using this file should do the following in main():
- set_program_name (argv[0]);
- */
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* String containing name the program is called with. */
-extern const char *program_name;
-
-/* Set program_name, based on argv[0].
- argv0 must be a string allocated with indefinite extent, and must not be
- modified after this call. */
-extern void set_program_name (const char *argv0);
-
-#if ENABLE_RELOCATABLE
-
-/* Set program_name, based on argv[0], and original installation prefix and
- directory, for relocatability. */
-extern void set_program_name_and_installdir (const char *argv0,
- const char *orig_installprefix,
- const char *orig_installdir);
-#undef set_program_name
-#define set_program_name(ARG0) \
- set_program_name_and_installdir (ARG0, INSTALLPREFIX, INSTALLDIR)
-
-/* Return the full pathname of the current executable, based on the earlier
- call to set_program_name_and_installdir. Return NULL if unknown. */
-extern char *get_full_program_name (void);
-
-#endif
-
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* _PROGNAME_H */
+++ /dev/null
-/* quote.h - prototypes for quote.c
-
- Copyright (C) 1998-2001, 2003, 2009-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef QUOTE_H_
-# define QUOTE_H_ 1
-
-/* The quoting options used by quote_n and quote. Its type is incomplete,
- so it's useful only in expressions like '"e_quoting_options'. */
-extern struct quoting_options quote_quoting_options;
-
-/* Return an unambiguous printable representation of NAME,
- allocated in slot N, suitable for diagnostics. */
-char const *quote_n (int n, char const *name);
-
-/* Return an unambiguous printable representation of NAME,
- suitable for diagnostics. */
-char const *quote (char const *name);
-
-#endif /* !QUOTE_H_ */
+++ /dev/null
-/* quotearg.c - quote arguments for output
-
- Copyright (C) 1998-2002, 2004-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Paul Eggert <eggert@twinsun.com> */
-
-/* Without this pragma, gcc 4.7.0 20111124 mistakenly suggests that
- the quoting_options_from_style function might be candidate for
- attribute 'pure' */
-#if (__GNUC__ == 4 && 6 <= __GNUC_MINOR__) || 4 < __GNUC__
-# pragma GCC diagnostic ignored "-Wsuggest-attribute=pure"
-#endif
-
-#include <config.h>
-
-#include "quotearg.h"
-#include "quote.h"
-
-#include "xalloc.h"
-#include "c-strcaseeq.h"
-#include "localcharset.h"
-
-#include <ctype.h>
-#include <errno.h>
-#include <limits.h>
-#include <stdbool.h>
-#include <stdlib.h>
-#include <string.h>
-#include <wchar.h>
-#include <wctype.h>
-
-#include "gettext.h"
-#define _(msgid) gettext (msgid)
-#define N_(msgid) msgid
-
-#ifndef SIZE_MAX
-# define SIZE_MAX ((size_t) -1)
-#endif
-
-#define INT_BITS (sizeof (int) * CHAR_BIT)
-
-struct quoting_options
-{
- /* Basic quoting style. */
- enum quoting_style style;
-
- /* Additional flags. Bitwise combination of enum quoting_flags. */
- int flags;
-
- /* Quote the characters indicated by this bit vector even if the
- quoting style would not normally require them to be quoted. */
- unsigned int quote_these_too[(UCHAR_MAX / INT_BITS) + 1];
-
- /* The left quote for custom_quoting_style. */
- char const *left_quote;
-
- /* The right quote for custom_quoting_style. */
- char const *right_quote;
-};
-
-/* Names of quoting styles. */
-char const *const quoting_style_args[] =
-{
- "literal",
- "shell",
- "shell-always",
- "c",
- "c-maybe",
- "escape",
- "locale",
- "clocale",
- 0
-};
-
-/* Correspondences to quoting style names. */
-enum quoting_style const quoting_style_vals[] =
-{
- literal_quoting_style,
- shell_quoting_style,
- shell_always_quoting_style,
- c_quoting_style,
- c_maybe_quoting_style,
- escape_quoting_style,
- locale_quoting_style,
- clocale_quoting_style
-};
-
-/* The default quoting options. */
-static struct quoting_options default_quoting_options;
-
-/* Allocate a new set of quoting options, with contents initially identical
- to O if O is not null, or to the default if O is null.
- It is the caller's responsibility to free the result. */
-struct quoting_options *
-clone_quoting_options (struct quoting_options *o)
-{
- int e = errno;
- struct quoting_options *p = xmemdup (o ? o : &default_quoting_options,
- sizeof *o);
- errno = e;
- return p;
-}
-
-/* Get the value of O's quoting style. If O is null, use the default. */
-enum quoting_style
-get_quoting_style (struct quoting_options *o)
-{
- return (o ? o : &default_quoting_options)->style;
-}
-
-/* In O (or in the default if O is null),
- set the value of the quoting style to S. */
-void
-set_quoting_style (struct quoting_options *o, enum quoting_style s)
-{
- (o ? o : &default_quoting_options)->style = s;
-}
-
-/* In O (or in the default if O is null),
- set the value of the quoting options for character C to I.
- Return the old value. Currently, the only values defined for I are
- 0 (the default) and 1 (which means to quote the character even if
- it would not otherwise be quoted). */
-int
-set_char_quoting (struct quoting_options *o, char c, int i)
-{
- unsigned char uc = c;
- unsigned int *p =
- (o ? o : &default_quoting_options)->quote_these_too + uc / INT_BITS;
- int shift = uc % INT_BITS;
- int r = (*p >> shift) & 1;
- *p ^= ((i & 1) ^ r) << shift;
- return r;
-}
-
-/* In O (or in the default if O is null),
- set the value of the quoting options flag to I, which can be a
- bitwise combination of enum quoting_flags, or 0 for default
- behavior. Return the old value. */
-int
-set_quoting_flags (struct quoting_options *o, int i)
-{
- int r;
- if (!o)
- o = &default_quoting_options;
- r = o->flags;
- o->flags = i;
- return r;
-}
-
-void
-set_custom_quoting (struct quoting_options *o,
- char const *left_quote, char const *right_quote)
-{
- if (!o)
- o = &default_quoting_options;
- o->style = custom_quoting_style;
- if (!left_quote || !right_quote)
- abort ();
- o->left_quote = left_quote;
- o->right_quote = right_quote;
-}
-
-/* Return quoting options for STYLE, with no extra quoting. */
-static struct quoting_options /* NOT PURE!! */
-quoting_options_from_style (enum quoting_style style)
-{
- struct quoting_options o = { 0, 0, { 0 }, NULL, NULL };
- if (style == custom_quoting_style)
- abort ();
- o.style = style;
- return o;
-}
-
-/* MSGID approximates a quotation mark. Return its translation if it
- has one; otherwise, return either it or "\"", depending on S.
-
- S is either clocale_quoting_style or locale_quoting_style. */
-static char const *
-gettext_quote (char const *msgid, enum quoting_style s)
-{
- char const *translation = _(msgid);
- char const *locale_code;
-
- if (translation != msgid)
- return translation;
-
- /* For UTF-8 and GB-18030, use single quotes U+2018 and U+2019.
- Here is a list of other locales that include U+2018 and U+2019:
-
- ISO-8859-7 0xA1 KOI8-T 0x91
- CP869 0x8B CP874 0x91
- CP932 0x81 0x65 CP936 0xA1 0xAE
- CP949 0xA1 0xAE CP950 0xA1 0xA5
- CP1250 0x91 CP1251 0x91
- CP1252 0x91 CP1253 0x91
- CP1254 0x91 CP1255 0x91
- CP1256 0x91 CP1257 0x91
- EUC-JP 0xA1 0xC6 EUC-KR 0xA1 0xAE
- EUC-TW 0xA1 0xE4 BIG5 0xA1 0xA5
- BIG5-HKSCS 0xA1 0xA5 EUC-CN 0xA1 0xAE
- GBK 0xA1 0xAE Georgian-PS 0x91
- PT154 0x91
-
- None of these is still in wide use; using iconv is overkill. */
- locale_code = locale_charset ();
- if (STRCASEEQ (locale_code, "UTF-8", 'U','T','F','-','8',0,0,0,0))
- return msgid[0] == '`' ? "\xe2\x80\x98": "\xe2\x80\x99";
- if (STRCASEEQ (locale_code, "GB18030", 'G','B','1','8','0','3','0',0,0))
- return msgid[0] == '`' ? "\xa1\ae": "\xa1\xaf";
-
- return (s == clocale_quoting_style ? "\"" : "'");
-}
-
-/* Place into buffer BUFFER (of size BUFFERSIZE) a quoted version of
- argument ARG (of size ARGSIZE), using QUOTING_STYLE, FLAGS, and
- QUOTE_THESE_TOO to control quoting.
- Terminate the output with a null character, and return the written
- size of the output, not counting the terminating null.
- If BUFFERSIZE is too small to store the output string, return the
- value that would have been returned had BUFFERSIZE been large enough.
- If ARGSIZE is SIZE_MAX, use the string length of the argument for ARGSIZE.
-
- This function acts like quotearg_buffer (BUFFER, BUFFERSIZE, ARG,
- ARGSIZE, O), except it breaks O into its component pieces and is
- not careful about errno. */
-
-static size_t
-quotearg_buffer_restyled (char *buffer, size_t buffersize,
- char const *arg, size_t argsize,
- enum quoting_style quoting_style, int flags,
- unsigned int const *quote_these_too,
- char const *left_quote,
- char const *right_quote)
-{
- size_t i;
- size_t len = 0;
- char const *quote_string = 0;
- size_t quote_string_len = 0;
- bool backslash_escapes = false;
- bool unibyte_locale = MB_CUR_MAX == 1;
- bool elide_outer_quotes = (flags & QA_ELIDE_OUTER_QUOTES) != 0;
-
-#define STORE(c) \
- do \
- { \
- if (len < buffersize) \
- buffer[len] = (c); \
- len++; \
- } \
- while (0)
-
- switch (quoting_style)
- {
- case c_maybe_quoting_style:
- quoting_style = c_quoting_style;
- elide_outer_quotes = true;
- /* Fall through. */
- case c_quoting_style:
- if (!elide_outer_quotes)
- STORE ('"');
- backslash_escapes = true;
- quote_string = "\"";
- quote_string_len = 1;
- break;
-
- case escape_quoting_style:
- backslash_escapes = true;
- elide_outer_quotes = false;
- break;
-
- case locale_quoting_style:
- case clocale_quoting_style:
- case custom_quoting_style:
- {
- if (quoting_style != custom_quoting_style)
- {
- /* TRANSLATORS:
- Get translations for open and closing quotation marks.
- The message catalog should translate "`" to a left
- quotation mark suitable for the locale, and similarly for
- "'". For example, a French Unicode local should translate
- these to U+00AB (LEFT-POINTING DOUBLE ANGLE
- QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
- QUOTATION MARK), respectively.
-
- If the catalog has no translation, we will try to
- use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
- Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
- current locale is not Unicode, locale_quoting_style
- will quote 'like this', and clocale_quoting_style will
- quote "like this". You should always include translations
- for "`" and "'" even if U+2018 and U+2019 are appropriate
- for your locale.
-
- If you don't know what to put here, please see
- <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
- and use glyphs suitable for your language. */
- left_quote = gettext_quote (N_("`"), quoting_style);
- right_quote = gettext_quote (N_("'"), quoting_style);
- }
- if (!elide_outer_quotes)
- for (quote_string = left_quote; *quote_string; quote_string++)
- STORE (*quote_string);
- backslash_escapes = true;
- quote_string = right_quote;
- quote_string_len = strlen (quote_string);
- }
- break;
-
- case shell_quoting_style:
- quoting_style = shell_always_quoting_style;
- elide_outer_quotes = true;
- /* Fall through. */
- case shell_always_quoting_style:
- if (!elide_outer_quotes)
- STORE ('\'');
- quote_string = "'";
- quote_string_len = 1;
- break;
-
- case literal_quoting_style:
- elide_outer_quotes = false;
- break;
-
- default:
- abort ();
- }
-
- for (i = 0; ! (argsize == SIZE_MAX ? arg[i] == '\0' : i == argsize); i++)
- {
- unsigned char c;
- unsigned char esc;
- bool is_right_quote = false;
-
- if (backslash_escapes
- && quote_string_len
- && i + quote_string_len <= argsize
- && memcmp (arg + i, quote_string, quote_string_len) == 0)
- {
- if (elide_outer_quotes)
- goto force_outer_quoting_style;
- is_right_quote = true;
- }
-
- c = arg[i];
- switch (c)
- {
- case '\0':
- if (backslash_escapes)
- {
- if (elide_outer_quotes)
- goto force_outer_quoting_style;
- STORE ('\\');
- /* If quote_string were to begin with digits, we'd need to
- test for the end of the arg as well. However, it's
- hard to imagine any locale that would use digits in
- quotes, and set_custom_quoting is documented not to
- accept them. */
- if (i + 1 < argsize && '0' <= arg[i + 1] && arg[i + 1] <= '9')
- {
- STORE ('0');
- STORE ('0');
- }
- c = '0';
- /* We don't have to worry that this last '0' will be
- backslash-escaped because, again, quote_string should
- not start with it and because quote_these_too is
- documented as not accepting it. */
- }
- else if (flags & QA_ELIDE_NULL_BYTES)
- continue;
- break;
-
- case '?':
- switch (quoting_style)
- {
- case shell_always_quoting_style:
- if (elide_outer_quotes)
- goto force_outer_quoting_style;
- break;
-
- case c_quoting_style:
- if ((flags & QA_SPLIT_TRIGRAPHS)
- && i + 2 < argsize && arg[i + 1] == '?')
- switch (arg[i + 2])
- {
- case '!': case '\'':
- case '(': case ')': case '-': case '/':
- case '<': case '=': case '>':
- /* Escape the second '?' in what would otherwise be
- a trigraph. */
- if (elide_outer_quotes)
- goto force_outer_quoting_style;
- c = arg[i + 2];
- i += 2;
- STORE ('?');
- STORE ('"');
- STORE ('"');
- STORE ('?');
- break;
-
- default:
- break;
- }
- break;
-
- default:
- break;
- }
- break;
-
- case '\a': esc = 'a'; goto c_escape;
- case '\b': esc = 'b'; goto c_escape;
- case '\f': esc = 'f'; goto c_escape;
- case '\n': esc = 'n'; goto c_and_shell_escape;
- case '\r': esc = 'r'; goto c_and_shell_escape;
- case '\t': esc = 't'; goto c_and_shell_escape;
- case '\v': esc = 'v'; goto c_escape;
- case '\\': esc = c;
- /* No need to escape the escape if we are trying to elide
- outer quotes and nothing else is problematic. */
- if (backslash_escapes && elide_outer_quotes && quote_string_len)
- goto store_c;
-
- c_and_shell_escape:
- if (quoting_style == shell_always_quoting_style
- && elide_outer_quotes)
- goto force_outer_quoting_style;
- /* Fall through. */
- c_escape:
- if (backslash_escapes)
- {
- c = esc;
- goto store_escape;
- }
- break;
-
- case '{': case '}': /* sometimes special if isolated */
- if (! (argsize == SIZE_MAX ? arg[1] == '\0' : argsize == 1))
- break;
- /* Fall through. */
- case '#': case '~':
- if (i != 0)
- break;
- /* Fall through. */
- case ' ':
- case '!': /* special in bash */
- case '"': case '$': case '&':
- case '(': case ')': case '*': case ';':
- case '<':
- case '=': /* sometimes special in 0th or (with "set -k") later args */
- case '>': case '[':
- case '^': /* special in old /bin/sh, e.g. SunOS 4.1.4 */
- case '`': case '|':
- /* A shell special character. In theory, '$' and '`' could
- be the first bytes of multibyte characters, which means
- we should check them with mbrtowc, but in practice this
- doesn't happen so it's not worth worrying about. */
- if (quoting_style == shell_always_quoting_style
- && elide_outer_quotes)
- goto force_outer_quoting_style;
- break;
-
- case '\'':
- if (quoting_style == shell_always_quoting_style)
- {
- if (elide_outer_quotes)
- goto force_outer_quoting_style;
- STORE ('\'');
- STORE ('\\');
- STORE ('\'');
- }
- break;
-
- case '%': case '+': case ',': case '-': case '.': case '/':
- case '0': case '1': case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9': case ':':
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- case 'G': case 'H': case 'I': case 'J': case 'K': case 'L':
- case 'M': case 'N': case 'O': case 'P': case 'Q': case 'R':
- case 'S': case 'T': case 'U': case 'V': case 'W': case 'X':
- case 'Y': case 'Z': case ']': case '_': case 'a': case 'b':
- case 'c': case 'd': case 'e': case 'f': case 'g': case 'h':
- case 'i': case 'j': case 'k': case 'l': case 'm': case 'n':
- case 'o': case 'p': case 'q': case 'r': case 's': case 't':
- case 'u': case 'v': case 'w': case 'x': case 'y': case 'z':
- /* These characters don't cause problems, no matter what the
- quoting style is. They cannot start multibyte sequences.
- A digit or a special letter would cause trouble if it
- appeared at the beginning of quote_string because we'd then
- escape by prepending a backslash. However, it's hard to
- imagine any locale that would use digits or letters as
- quotes, and set_custom_quoting is documented not to accept
- them. Also, a digit or a special letter would cause
- trouble if it appeared in quote_these_too, but that's also
- documented as not accepting them. */
- break;
-
- default:
- /* If we have a multibyte sequence, copy it until we reach
- its end, find an error, or come back to the initial shift
- state. For C-like styles, if the sequence has
- unprintable characters, escape the whole sequence, since
- we can't easily escape single characters within it. */
- {
- /* Length of multibyte sequence found so far. */
- size_t m;
-
- bool printable;
-
- if (unibyte_locale)
- {
- m = 1;
- printable = isprint (c) != 0;
- }
- else
- {
- mbstate_t mbstate;
- memset (&mbstate, 0, sizeof mbstate);
-
- m = 0;
- printable = true;
- if (argsize == SIZE_MAX)
- argsize = strlen (arg);
-
- do
- {
- wchar_t w;
- size_t bytes = mbrtowc (&w, &arg[i + m],
- argsize - (i + m), &mbstate);
- if (bytes == 0)
- break;
- else if (bytes == (size_t) -1)
- {
- printable = false;
- break;
- }
- else if (bytes == (size_t) -2)
- {
- printable = false;
- while (i + m < argsize && arg[i + m])
- m++;
- break;
- }
- else
- {
- /* Work around a bug with older shells that "see" a '\'
- that is really the 2nd byte of a multibyte character.
- In practice the problem is limited to ASCII
- chars >= '@' that are shell special chars. */
- if ('[' == 0x5b && elide_outer_quotes
- && quoting_style == shell_always_quoting_style)
- {
- size_t j;
- for (j = 1; j < bytes; j++)
- switch (arg[i + m + j])
- {
- case '[': case '\\': case '^':
- case '`': case '|':
- goto force_outer_quoting_style;
-
- default:
- break;
- }
- }
-
- if (! iswprint (w))
- printable = false;
- m += bytes;
- }
- }
- while (! mbsinit (&mbstate));
- }
-
- if (1 < m || (backslash_escapes && ! printable))
- {
- /* Output a multibyte sequence, or an escaped
- unprintable unibyte character. */
- size_t ilim = i + m;
-
- for (;;)
- {
- if (backslash_escapes && ! printable)
- {
- if (elide_outer_quotes)
- goto force_outer_quoting_style;
- STORE ('\\');
- STORE ('0' + (c >> 6));
- STORE ('0' + ((c >> 3) & 7));
- c = '0' + (c & 7);
- }
- else if (is_right_quote)
- {
- STORE ('\\');
- is_right_quote = false;
- }
- if (ilim <= i + 1)
- break;
- STORE (c);
- c = arg[++i];
- }
-
- goto store_c;
- }
- }
- }
-
- if (! ((backslash_escapes || elide_outer_quotes)
- && quote_these_too
- && quote_these_too[c / INT_BITS] & (1 << (c % INT_BITS)))
- && !is_right_quote)
- goto store_c;
-
- store_escape:
- if (elide_outer_quotes)
- goto force_outer_quoting_style;
- STORE ('\\');
-
- store_c:
- STORE (c);
- }
-
- if (len == 0 && quoting_style == shell_always_quoting_style
- && elide_outer_quotes)
- goto force_outer_quoting_style;
-
- if (quote_string && !elide_outer_quotes)
- for (; *quote_string; quote_string++)
- STORE (*quote_string);
-
- if (len < buffersize)
- buffer[len] = '\0';
- return len;
-
- force_outer_quoting_style:
- /* Don't reuse quote_these_too, since the addition of outer quotes
- sufficiently quotes the specified characters. */
- return quotearg_buffer_restyled (buffer, buffersize, arg, argsize,
- quoting_style,
- flags & ~QA_ELIDE_OUTER_QUOTES, NULL,
- left_quote, right_quote);
-}
-
-/* Place into buffer BUFFER (of size BUFFERSIZE) a quoted version of
- argument ARG (of size ARGSIZE), using O to control quoting.
- If O is null, use the default.
- Terminate the output with a null character, and return the written
- size of the output, not counting the terminating null.
- If BUFFERSIZE is too small to store the output string, return the
- value that would have been returned had BUFFERSIZE been large enough.
- If ARGSIZE is SIZE_MAX, use the string length of the argument for
- ARGSIZE. */
-size_t
-quotearg_buffer (char *buffer, size_t buffersize,
- char const *arg, size_t argsize,
- struct quoting_options const *o)
-{
- struct quoting_options const *p = o ? o : &default_quoting_options;
- int e = errno;
- size_t r = quotearg_buffer_restyled (buffer, buffersize, arg, argsize,
- p->style, p->flags, p->quote_these_too,
- p->left_quote, p->right_quote);
- errno = e;
- return r;
-}
-
-/* Equivalent to quotearg_alloc (ARG, ARGSIZE, NULL, O). */
-char *
-quotearg_alloc (char const *arg, size_t argsize,
- struct quoting_options const *o)
-{
- return quotearg_alloc_mem (arg, argsize, NULL, o);
-}
-
-/* Like quotearg_buffer (..., ARG, ARGSIZE, O), except return newly
- allocated storage containing the quoted string, and store the
- resulting size into *SIZE, if non-NULL. The result can contain
- embedded null bytes only if ARGSIZE is not SIZE_MAX, SIZE is not
- NULL, and set_quoting_flags has not set the null byte elision
- flag. */
-char *
-quotearg_alloc_mem (char const *arg, size_t argsize, size_t *size,
- struct quoting_options const *o)
-{
- struct quoting_options const *p = o ? o : &default_quoting_options;
- int e = errno;
- /* Elide embedded null bytes if we can't return a size. */
- int flags = p->flags | (size ? 0 : QA_ELIDE_NULL_BYTES);
- size_t bufsize = quotearg_buffer_restyled (0, 0, arg, argsize, p->style,
- flags, p->quote_these_too,
- p->left_quote,
- p->right_quote) + 1;
- char *buf = xcharalloc (bufsize);
- quotearg_buffer_restyled (buf, bufsize, arg, argsize, p->style, flags,
- p->quote_these_too,
- p->left_quote, p->right_quote);
- errno = e;
- if (size)
- *size = bufsize - 1;
- return buf;
-}
-
-/* A storage slot with size and pointer to a value. */
-struct slotvec
-{
- size_t size;
- char *val;
-};
-
-/* Preallocate a slot 0 buffer, so that the caller can always quote
- one small component of a "memory exhausted" message in slot 0. */
-static char slot0[256];
-static unsigned int nslots = 1;
-static struct slotvec slotvec0 = {sizeof slot0, slot0};
-static struct slotvec *slotvec = &slotvec0;
-
-void
-quotearg_free (void)
-{
- struct slotvec *sv = slotvec;
- unsigned int i;
- for (i = 1; i < nslots; i++)
- free (sv[i].val);
- if (sv[0].val != slot0)
- {
- free (sv[0].val);
- slotvec0.size = sizeof slot0;
- slotvec0.val = slot0;
- }
- if (sv != &slotvec0)
- {
- free (sv);
- slotvec = &slotvec0;
- }
- nslots = 1;
-}
-
-/* Use storage slot N to return a quoted version of argument ARG.
- ARG is of size ARGSIZE, but if that is SIZE_MAX, ARG is a
- null-terminated string.
- OPTIONS specifies the quoting options.
- The returned value points to static storage that can be
- reused by the next call to this function with the same value of N.
- N must be nonnegative. N is deliberately declared with type "int"
- to allow for future extensions (using negative values). */
-static char *
-quotearg_n_options (int n, char const *arg, size_t argsize,
- struct quoting_options const *options)
-{
- int e = errno;
-
- unsigned int n0 = n;
- struct slotvec *sv = slotvec;
-
- if (n < 0)
- abort ();
-
- if (nslots <= n0)
- {
- /* FIXME: technically, the type of n1 should be 'unsigned int',
- but that evokes an unsuppressible warning from gcc-4.0.1 and
- older. If gcc ever provides an option to suppress that warning,
- revert to the original type, so that the test in xalloc_oversized
- is once again performed only at compile time. */
- size_t n1 = n0 + 1;
- bool preallocated = (sv == &slotvec0);
-
- if (xalloc_oversized (n1, sizeof *sv))
- xalloc_die ();
-
- slotvec = sv = xrealloc (preallocated ? NULL : sv, n1 * sizeof *sv);
- if (preallocated)
- *sv = slotvec0;
- memset (sv + nslots, 0, (n1 - nslots) * sizeof *sv);
- nslots = n1;
- }
-
- {
- size_t size = sv[n].size;
- char *val = sv[n].val;
- /* Elide embedded null bytes since we don't return a size. */
- int flags = options->flags | QA_ELIDE_NULL_BYTES;
- size_t qsize = quotearg_buffer_restyled (val, size, arg, argsize,
- options->style, flags,
- options->quote_these_too,
- options->left_quote,
- options->right_quote);
-
- if (size <= qsize)
- {
- sv[n].size = size = qsize + 1;
- if (val != slot0)
- free (val);
- sv[n].val = val = xcharalloc (size);
- quotearg_buffer_restyled (val, size, arg, argsize, options->style,
- flags, options->quote_these_too,
- options->left_quote,
- options->right_quote);
- }
-
- errno = e;
- return val;
- }
-}
-
-char *
-quotearg_n (int n, char const *arg)
-{
- return quotearg_n_options (n, arg, SIZE_MAX, &default_quoting_options);
-}
-
-char *
-quotearg_n_mem (int n, char const *arg, size_t argsize)
-{
- return quotearg_n_options (n, arg, argsize, &default_quoting_options);
-}
-
-char *
-quotearg (char const *arg)
-{
- return quotearg_n (0, arg);
-}
-
-char *
-quotearg_mem (char const *arg, size_t argsize)
-{
- return quotearg_n_mem (0, arg, argsize);
-}
-
-char *
-quotearg_n_style (int n, enum quoting_style s, char const *arg)
-{
- struct quoting_options const o = quoting_options_from_style (s);
- return quotearg_n_options (n, arg, SIZE_MAX, &o);
-}
-
-char *
-quotearg_n_style_mem (int n, enum quoting_style s,
- char const *arg, size_t argsize)
-{
- struct quoting_options const o = quoting_options_from_style (s);
- return quotearg_n_options (n, arg, argsize, &o);
-}
-
-char *
-quotearg_style (enum quoting_style s, char const *arg)
-{
- return quotearg_n_style (0, s, arg);
-}
-
-char *
-quotearg_style_mem (enum quoting_style s, char const *arg, size_t argsize)
-{
- return quotearg_n_style_mem (0, s, arg, argsize);
-}
-
-char *
-quotearg_char_mem (char const *arg, size_t argsize, char ch)
-{
- struct quoting_options options;
- options = default_quoting_options;
- set_char_quoting (&options, ch, 1);
- return quotearg_n_options (0, arg, argsize, &options);
-}
-
-char *
-quotearg_char (char const *arg, char ch)
-{
- return quotearg_char_mem (arg, SIZE_MAX, ch);
-}
-
-char *
-quotearg_colon (char const *arg)
-{
- return quotearg_char (arg, ':');
-}
-
-char *
-quotearg_colon_mem (char const *arg, size_t argsize)
-{
- return quotearg_char_mem (arg, argsize, ':');
-}
-
-char *
-quotearg_n_custom (int n, char const *left_quote,
- char const *right_quote, char const *arg)
-{
- return quotearg_n_custom_mem (n, left_quote, right_quote, arg,
- SIZE_MAX);
-}
-
-char *
-quotearg_n_custom_mem (int n, char const *left_quote,
- char const *right_quote,
- char const *arg, size_t argsize)
-{
- struct quoting_options o = default_quoting_options;
- set_custom_quoting (&o, left_quote, right_quote);
- return quotearg_n_options (n, arg, argsize, &o);
-}
-
-char *
-quotearg_custom (char const *left_quote, char const *right_quote,
- char const *arg)
-{
- return quotearg_n_custom (0, left_quote, right_quote, arg);
-}
-
-char *
-quotearg_custom_mem (char const *left_quote, char const *right_quote,
- char const *arg, size_t argsize)
-{
- return quotearg_n_custom_mem (0, left_quote, right_quote, arg,
- argsize);
-}
-
-
-/* The quoting option used by quote_n and quote. */
-struct quoting_options quote_quoting_options =
- {
- locale_quoting_style,
- 0,
- { 0 },
- NULL, NULL
- };
-
-char const *
-quote_n (int n, char const *name)
-{
- return quotearg_n_options (n, name, SIZE_MAX, "e_quoting_options);
-}
-
-char const *
-quote (char const *name)
-{
- return quote_n (0, name);
-}
+++ /dev/null
-/* quotearg.h - quote arguments for output
-
- Copyright (C) 1998-2002, 2004, 2006, 2008-2012 Free Software Foundation,
- Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Paul Eggert <eggert@twinsun.com> */
-
-#ifndef QUOTEARG_H_
-# define QUOTEARG_H_ 1
-
-# include <stddef.h>
-
-/* Basic quoting styles. For each style, an example is given on the
- input strings "simple", "\0 \t\n'\"\033?""?/\\", and "a:b", using
- quotearg_buffer, quotearg_mem, and quotearg_colon_mem with that
- style and the default flags and quoted characters. Note that the
- examples are shown here as valid C strings rather than what
- displays on a terminal (with "??/" as a trigraph for "\\"). */
-enum quoting_style
- {
- /* Output names as-is (ls --quoting-style=literal). Can result in
- embedded null bytes if QA_ELIDE_NULL_BYTES is not in
- effect.
-
- quotearg_buffer:
- "simple", "\0 \t\n'\"\033??/\\", "a:b"
- quotearg:
- "simple", " \t\n'\"\033??/\\", "a:b"
- quotearg_colon:
- "simple", " \t\n'\"\033??/\\", "a:b"
- */
- literal_quoting_style,
-
- /* Quote names for the shell if they contain shell metacharacters
- or would cause ambiguous output (ls --quoting-style=shell).
- Can result in embedded null bytes if QA_ELIDE_NULL_BYTES is not
- in effect.
-
- quotearg_buffer:
- "simple", "'\0 \t\n'\\''\"\033??/\\'", "a:b"
- quotearg:
- "simple", "' \t\n'\\''\"\033??/\\'", "a:b"
- quotearg_colon:
- "simple", "' \t\n'\\''\"\033??/\\'", "'a:b'"
- */
- shell_quoting_style,
-
- /* Quote names for the shell, even if they would normally not
- require quoting (ls --quoting-style=shell-always). Can result
- in embedded null bytes if QA_ELIDE_NULL_BYTES is not in effect.
- Behaves like shell_quoting_style if QA_ELIDE_OUTER_QUOTES is in
- effect.
-
- quotearg_buffer:
- "'simple'", "'\0 \t\n'\\''\"\033??/\\'", "'a:b'"
- quotearg:
- "'simple'", "' \t\n'\\''\"\033??/\\'", "'a:b'"
- quotearg_colon:
- "'simple'", "' \t\n'\\''\"\033??/\\'", "'a:b'"
- */
- shell_always_quoting_style,
-
- /* Quote names as for a C language string (ls --quoting-style=c).
- Behaves like c_maybe_quoting_style if QA_ELIDE_OUTER_QUOTES is
- in effect. Split into consecutive strings if
- QA_SPLIT_TRIGRAPHS.
-
- quotearg_buffer:
- "\"simple\"", "\"\\0 \\t\\n'\\\"\\033??/\\\\\"", "\"a:b\""
- quotearg:
- "\"simple\"", "\"\\0 \\t\\n'\\\"\\033??/\\\\\"", "\"a:b\""
- quotearg_colon:
- "\"simple\"", "\"\\0 \\t\\n'\\\"\\033??/\\\\\"", "\"a\\:b\""
- */
- c_quoting_style,
-
- /* Like c_quoting_style except omit the surrounding double-quote
- characters if no quoted characters are encountered.
-
- quotearg_buffer:
- "simple", "\"\\0 \\t\\n'\\\"\\033??/\\\\\"", "a:b"
- quotearg:
- "simple", "\"\\0 \\t\\n'\\\"\\033??/\\\\\"", "a:b"
- quotearg_colon:
- "simple", "\"\\0 \\t\\n'\\\"\\033??/\\\\\"", "\"a:b\""
- */
- c_maybe_quoting_style,
-
- /* Like c_quoting_style except always omit the surrounding
- double-quote characters and ignore QA_SPLIT_TRIGRAPHS
- (ls --quoting-style=escape).
-
- quotearg_buffer:
- "simple", "\\0 \\t\\n'\"\\033??/\\\\", "a:b"
- quotearg:
- "simple", "\\0 \\t\\n'\"\\033??/\\\\", "a:b"
- quotearg_colon:
- "simple", "\\0 \\t\\n'\"\\033??/\\\\", "a\\:b"
- */
- escape_quoting_style,
-
- /* Like clocale_quoting_style, but use single quotes in the
- default C locale or if the program does not use gettext
- (ls --quoting-style=locale). For UTF-8 locales, quote
- characters will use Unicode.
-
- LC_MESSAGES=C
- quotearg_buffer:
- "`simple'", "`\\0 \\t\\n\\'\"\\033??/\\\\'", "`a:b'"
- quotearg:
- "`simple'", "`\\0 \\t\\n\\'\"\\033??/\\\\'", "`a:b'"
- quotearg_colon:
- "`simple'", "`\\0 \\t\\n\\'\"\\033??/\\\\'", "`a\\:b'"
-
- LC_MESSAGES=pt_PT.utf8
- quotearg_buffer:
- "\302\253simple\302\273",
- "\302\253\\0 \\t\\n'\"\\033??/\\\\\302\253", "\302\253a:b\302\273"
- quotearg:
- "\302\253simple\302\273",
- "\302\253\\0 \\t\\n'\"\\033??/\\\\\302\253", "\302\253a:b\302\273"
- quotearg_colon:
- "\302\253simple\302\273",
- "\302\253\\0 \\t\\n'\"\\033??/\\\\\302\253", "\302\253a\\:b\302\273"
- */
- locale_quoting_style,
-
- /* Like c_quoting_style except use quotation marks appropriate for
- the locale and ignore QA_SPLIT_TRIGRAPHS
- (ls --quoting-style=clocale).
-
- LC_MESSAGES=C
- quotearg_buffer:
- "\"simple\"", "\"\\0 \\t\\n'\\\"\\033??/\\\\\"", "\"a:b\""
- quotearg:
- "\"simple\"", "\"\\0 \\t\\n'\\\"\\033??/\\\\\"", "\"a:b\""
- quotearg_colon:
- "\"simple\"", "\"\\0 \\t\\n'\\\"\\033??/\\\\\"", "\"a\\:b\""
-
- LC_MESSAGES=pt_PT.utf8
- quotearg_buffer:
- "\302\253simple\302\273",
- "\302\253\\0 \\t\\n'\"\\033??/\\\\\302\253", "\302\253a:b\302\273"
- quotearg:
- "\302\253simple\302\273",
- "\302\253\\0 \\t\\n'\"\\033??/\\\\\302\253", "\302\253a:b\302\273"
- quotearg_colon:
- "\302\253simple\302\273",
- "\302\253\\0 \\t\\n'\"\\033??/\\\\\302\253", "\302\253a\\:b\302\273"
- */
- clocale_quoting_style,
-
- /* Like clocale_quoting_style except use the custom quotation marks
- set by set_custom_quoting. If custom quotation marks are not
- set, the behavior is undefined.
-
- left_quote = right_quote = "'"
- quotearg_buffer:
- "'simple'", "'\\0 \\t\\n\\'\"\\033??/\\\\'", "'a:b'"
- quotearg:
- "'simple'", "'\\0 \\t\\n\\'\"\\033??/\\\\'", "'a:b'"
- quotearg_colon:
- "'simple'", "'\\0 \\t\\n\\'\"\\033??/\\\\'", "'a\\:b'"
-
- left_quote = "(" and right_quote = ")"
- quotearg_buffer:
- "(simple)", "(\\0 \\t\\n'\"\\033??/\\\\)", "(a:b)"
- quotearg:
- "(simple)", "(\\0 \\t\\n'\"\\033??/\\\\)", "(a:b)"
- quotearg_colon:
- "(simple)", "(\\0 \\t\\n'\"\\033??/\\\\)", "(a\\:b)"
-
- left_quote = ":" and right_quote = " "
- quotearg_buffer:
- ":simple ", ":\\0\\ \\t\\n'\"\\033??/\\\\ ", ":a:b "
- quotearg:
- ":simple ", ":\\0\\ \\t\\n'\"\\033??/\\\\ ", ":a:b "
- quotearg_colon:
- ":simple ", ":\\0\\ \\t\\n'\"\\033??/\\\\ ", ":a\\:b "
-
- left_quote = "\"'" and right_quote = "'\""
- Notice that this is treated as a single level of quotes or two
- levels where the outer quote need not be escaped within the inner
- quotes. For two levels where the outer quote must be escaped
- within the inner quotes, you must use separate quotearg
- invocations.
- quotearg_buffer:
- "\"'simple'\"", "\"'\\0 \\t\\n\\'\"\\033??/\\\\'\"", "\"'a:b'\""
- quotearg:
- "\"'simple'\"", "\"'\\0 \\t\\n\\'\"\\033??/\\\\'\"", "\"'a:b'\""
- quotearg_colon:
- "\"'simple'\"", "\"'\\0 \\t\\n\\'\"\\033??/\\\\'\"", "\"'a\\:b'\""
- */
- custom_quoting_style
- };
-
-/* Flags for use in set_quoting_flags. */
-enum quoting_flags
- {
- /* Always elide null bytes from styles that do not quote them,
- even when the length of the result is available to the
- caller. */
- QA_ELIDE_NULL_BYTES = 0x01,
-
- /* Omit the surrounding quote characters if no escaped characters
- are encountered. Note that if no other character needs
- escaping, then neither does the escape character. */
- QA_ELIDE_OUTER_QUOTES = 0x02,
-
- /* In the c_quoting_style and c_maybe_quoting_style, split ANSI
- trigraph sequences into concatenated strings (for example,
- "?""?/" rather than "??/", which could be confused with
- "\\"). */
- QA_SPLIT_TRIGRAPHS = 0x04
- };
-
-/* For now, --quoting-style=literal is the default, but this may change. */
-# ifndef DEFAULT_QUOTING_STYLE
-# define DEFAULT_QUOTING_STYLE literal_quoting_style
-# endif
-
-/* Names of quoting styles and their corresponding values. */
-extern char const *const quoting_style_args[];
-extern enum quoting_style const quoting_style_vals[];
-
-struct quoting_options;
-
-/* The functions listed below set and use a hidden variable
- that contains the default quoting style options. */
-
-/* Allocate a new set of quoting options, with contents initially identical
- to O if O is not null, or to the default if O is null.
- It is the caller's responsibility to free the result. */
-struct quoting_options *clone_quoting_options (struct quoting_options *o);
-
-/* Get the value of O's quoting style. If O is null, use the default. */
-enum quoting_style get_quoting_style (struct quoting_options *o);
-
-/* In O (or in the default if O is null),
- set the value of the quoting style to S. */
-void set_quoting_style (struct quoting_options *o, enum quoting_style s);
-
-/* In O (or in the default if O is null),
- set the value of the quoting options for character C to I.
- Return the old value. Currently, the only values defined for I are
- 0 (the default) and 1 (which means to quote the character even if
- it would not otherwise be quoted). C must never be a digit or a
- letter that has special meaning after a backslash (for example, "\t"
- for tab). */
-int set_char_quoting (struct quoting_options *o, char c, int i);
-
-/* In O (or in the default if O is null),
- set the value of the quoting options flag to I, which can be a
- bitwise combination of enum quoting_flags, or 0 for default
- behavior. Return the old value. */
-int set_quoting_flags (struct quoting_options *o, int i);
-
-/* In O (or in the default if O is null),
- set the value of the quoting style to custom_quoting_style,
- set the left quote to LEFT_QUOTE, and set the right quote to
- RIGHT_QUOTE. Each of LEFT_QUOTE and RIGHT_QUOTE must be
- null-terminated and can be the empty string. Because backslashes are
- used for escaping, it does not make sense for RIGHT_QUOTE to contain
- a backslash. RIGHT_QUOTE must not begin with a digit or a letter
- that has special meaning after a backslash (for example, "\t" for
- tab). */
-void set_custom_quoting (struct quoting_options *o,
- char const *left_quote,
- char const *right_quote);
-
-/* Place into buffer BUFFER (of size BUFFERSIZE) a quoted version of
- argument ARG (of size ARGSIZE), using O to control quoting.
- If O is null, use the default.
- Terminate the output with a null character, and return the written
- size of the output, not counting the terminating null.
- If BUFFERSIZE is too small to store the output string, return the
- value that would have been returned had BUFFERSIZE been large enough.
- If ARGSIZE is -1, use the string length of the argument for ARGSIZE.
- On output, BUFFER might contain embedded null bytes if ARGSIZE was
- not -1, the style of O does not use backslash escapes, and the
- flags of O do not request elision of null bytes.*/
-size_t quotearg_buffer (char *buffer, size_t buffersize,
- char const *arg, size_t argsize,
- struct quoting_options const *o);
-
-/* Like quotearg_buffer, except return the result in a newly allocated
- buffer. It is the caller's responsibility to free the result. The
- result will not contain embedded null bytes. */
-char *quotearg_alloc (char const *arg, size_t argsize,
- struct quoting_options const *o);
-
-/* Like quotearg_alloc, except that the length of the result,
- excluding the terminating null byte, is stored into SIZE if it is
- non-NULL. The result might contain embedded null bytes if ARGSIZE
- was not -1, SIZE was not NULL, the style of O does not use
- backslash escapes, and the flags of O do not request elision of
- null bytes.*/
-char *quotearg_alloc_mem (char const *arg, size_t argsize,
- size_t *size, struct quoting_options const *o);
-
-/* Use storage slot N to return a quoted version of the string ARG.
- Use the default quoting options.
- The returned value points to static storage that can be
- reused by the next call to this function with the same value of N.
- N must be nonnegative. The output of all functions in the
- quotearg_n family are guaranteed to not contain embedded null
- bytes.*/
-char *quotearg_n (int n, char const *arg);
-
-/* Equivalent to quotearg_n (0, ARG). */
-char *quotearg (char const *arg);
-
-/* Use storage slot N to return a quoted version of the argument ARG
- of size ARGSIZE. This is like quotearg_n (N, ARG), except it can
- quote null bytes. */
-char *quotearg_n_mem (int n, char const *arg, size_t argsize);
-
-/* Equivalent to quotearg_n_mem (0, ARG, ARGSIZE). */
-char *quotearg_mem (char const *arg, size_t argsize);
-
-/* Use style S and storage slot N to return a quoted version of the string ARG.
- This is like quotearg_n (N, ARG), except that it uses S with no other
- options to specify the quoting method. */
-char *quotearg_n_style (int n, enum quoting_style s, char const *arg);
-
-/* Use style S and storage slot N to return a quoted version of the
- argument ARG of size ARGSIZE. This is like quotearg_n_style
- (N, S, ARG), except it can quote null bytes. */
-char *quotearg_n_style_mem (int n, enum quoting_style s,
- char const *arg, size_t argsize);
-
-/* Equivalent to quotearg_n_style (0, S, ARG). */
-char *quotearg_style (enum quoting_style s, char const *arg);
-
-/* Equivalent to quotearg_n_style_mem (0, S, ARG, ARGSIZE). */
-char *quotearg_style_mem (enum quoting_style s,
- char const *arg, size_t argsize);
-
-/* Like quotearg (ARG), except also quote any instances of CH.
- See set_char_quoting for a description of acceptable CH values. */
-char *quotearg_char (char const *arg, char ch);
-
-/* Like quotearg_char (ARG, CH), except it can quote null bytes. */
-char *quotearg_char_mem (char const *arg, size_t argsize, char ch);
-
-/* Equivalent to quotearg_char (ARG, ':'). */
-char *quotearg_colon (char const *arg);
-
-/* Like quotearg_colon (ARG), except it can quote null bytes. */
-char *quotearg_colon_mem (char const *arg, size_t argsize);
-
-/* Like quotearg_n_style (N, S, ARG) but with S as custom_quoting_style
- with left quote as LEFT_QUOTE and right quote as RIGHT_QUOTE. See
- set_custom_quoting for a description of acceptable LEFT_QUOTE and
- RIGHT_QUOTE values. */
-char *quotearg_n_custom (int n, char const *left_quote,
- char const *right_quote, char const *arg);
-
-/* Like quotearg_n_custom (N, LEFT_QUOTE, RIGHT_QUOTE, ARG) except it
- can quote null bytes. */
-char *quotearg_n_custom_mem (int n, char const *left_quote,
- char const *right_quote,
- char const *arg, size_t argsize);
-
-/* Equivalent to quotearg_n_custom (0, LEFT_QUOTE, RIGHT_QUOTE, ARG). */
-char *quotearg_custom (char const *left_quote, char const *right_quote,
- char const *arg);
-
-/* Equivalent to quotearg_n_custom_mem (0, LEFT_QUOTE, RIGHT_QUOTE, ARG,
- ARGSIZE). */
-char *quotearg_custom_mem (char const *left_quote,
- char const *right_quote,
- char const *arg, size_t argsize);
-
-/* Free any dynamically allocated memory. */
-void quotearg_free (void);
-
-#endif /* !QUOTEARG_H_ */
+++ /dev/null
-# Add this package to a list of references stored in a text file.
-#
-# Copyright (C) 2000, 2009-2012 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# Written by Bruno Haible <haible@clisp.cons.org>.
-#
-/^# Packages using this file: / {
- s/# Packages using this file://
- ta
- :a
- s/ @PACKAGE@ / @PACKAGE@ /
- tb
- s/ $/ @PACKAGE@ /
- :b
- s/^/# Packages using this file:/
-}
+++ /dev/null
-# Remove this package from a list of references stored in a text file.
-#
-# Copyright (C) 2000, 2009-2012 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, see <http://www.gnu.org/licenses/>.
-#
-# Written by Bruno Haible <haible@clisp.cons.org>.
-#
-/^# Packages using this file: / {
- s/# Packages using this file://
- s/ @PACKAGE@ / /
- s/^/# Packages using this file:/
-}
+++ /dev/null
-/* Copyright (C) 2001-2003, 2006-2012 Free Software Foundation, Inc.
- Written by Bruno Haible <haible@clisp.cons.org>, 2001.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _GL_STDBOOL_H
-#define _GL_STDBOOL_H
-
-/* ISO C 99 <stdbool.h> for platforms that lack it. */
-
-/* Usage suggestions:
-
- Programs that use <stdbool.h> should be aware of some limitations
- and standards compliance issues.
-
- Standards compliance:
-
- - <stdbool.h> must be #included before 'bool', 'false', 'true'
- can be used.
-
- - You cannot assume that sizeof (bool) == 1.
-
- - Programs should not undefine the macros bool, true, and false,
- as C99 lists that as an "obsolescent feature".
-
- Limitations of this substitute, when used in a C89 environment:
-
- - <stdbool.h> must be #included before the '_Bool' type can be used.
-
- - You cannot assume that _Bool is a typedef; it might be a macro.
-
- - Bit-fields of type 'bool' are not supported. Portable code
- should use 'unsigned int foo : 1;' rather than 'bool foo : 1;'.
-
- - In C99, casts and automatic conversions to '_Bool' or 'bool' are
- performed in such a way that every nonzero value gets converted
- to 'true', and zero gets converted to 'false'. This doesn't work
- with this substitute. With this substitute, only the values 0 and 1
- give the expected result when converted to _Bool' or 'bool'.
-
- - C99 allows the use of (_Bool)0.0 in constant expressions, but
- this substitute cannot always provide this property.
-
- Also, it is suggested that programs use 'bool' rather than '_Bool';
- this isn't required, but 'bool' is more common. */
-
-
-/* 7.16. Boolean type and values */
-
-/* BeOS <sys/socket.h> already #defines false 0, true 1. We use the same
- definitions below, but temporarily we have to #undef them. */
-#if defined __BEOS__ && !defined __HAIKU__
-# include <OS.h> /* defines bool but not _Bool */
-# undef false
-# undef true
-#endif
-
-/* For the sake of symbolic names in gdb, we define true and false as
- enum constants, not only as macros.
- It is tempting to write
- typedef enum { false = 0, true = 1 } _Bool;
- so that gdb prints values of type 'bool' symbolically. But if we do
- this, values of type '_Bool' may promote to 'int' or 'unsigned int'
- (see ISO C 99 6.7.2.2.(4)); however, '_Bool' must promote to 'int'
- (see ISO C 99 6.3.1.1.(2)). So we add a negative value to the
- enum; this ensures that '_Bool' promotes to 'int'. */
-#if defined __cplusplus || (defined __BEOS__ && !defined __HAIKU__)
- /* A compiler known to have 'bool'. */
- /* If the compiler already has both 'bool' and '_Bool', we can assume they
- are the same types. */
-# if !@HAVE__BOOL@
-typedef bool _Bool;
-# endif
-#else
-# if !defined __GNUC__
- /* If @HAVE__BOOL@:
- Some HP-UX cc and AIX IBM C compiler versions have compiler bugs when
- the built-in _Bool type is used. See
- http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
- http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
- http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html
- Similar bugs are likely with other compilers as well; this file
- wouldn't be used if <stdbool.h> was working.
- So we override the _Bool type.
- If !@HAVE__BOOL@:
- Need to define _Bool ourselves. As 'signed char' or as an enum type?
- Use of a typedef, with SunPRO C, leads to a stupid
- "warning: _Bool is a keyword in ISO C99".
- Use of an enum type, with IRIX cc, leads to a stupid
- "warning(1185): enumerated type mixed with another type".
- Even the existence of an enum type, without a typedef,
- "Invalid enumerator. (badenum)" with HP-UX cc on Tru64.
- The only benefit of the enum, debuggability, is not important
- with these compilers. So use 'signed char' and no enum. */
-# define _Bool signed char
-# else
- /* With this compiler, trust the _Bool type if the compiler has it. */
-# if !@HAVE__BOOL@
-typedef enum { _Bool_must_promote_to_int = -1, false = 0, true = 1 } _Bool;
-# endif
-# endif
-#endif
-#define bool _Bool
-
-/* The other macros must be usable in preprocessor directives. */
-#define false 0
-#define true 1
-#define __bool_true_false_are_defined 1
-
-#endif /* _GL_STDBOOL_H */
+++ /dev/null
-/* A substitute for POSIX 2008 <stddef.h>, for platforms that have issues.
-
- Copyright (C) 2009-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Eric Blake. */
-
-/*
- * POSIX 2008 <stddef.h> for platforms that have issues.
- * <http://www.opengroup.org/susv3xbd/stddef.h.html>
- */
-
-#if __GNUC__ >= 3
-@PRAGMA_SYSTEM_HEADER@
-#endif
-@PRAGMA_COLUMNS@
-
-#if defined __need_wchar_t || defined __need_size_t \
- || defined __need_ptrdiff_t || defined __need_NULL \
- || defined __need_wint_t
-/* Special invocation convention inside gcc header files. In
- particular, gcc provides a version of <stddef.h> that blindly
- redefines NULL even when __need_wint_t was defined, even though
- wint_t is not normally provided by <stddef.h>. Hence, we must
- remember if special invocation has ever been used to obtain wint_t,
- in which case we need to clean up NULL yet again. */
-
-# if !(defined _@GUARD_PREFIX@_STDDEF_H && defined _GL_STDDEF_WINT_T)
-# ifdef __need_wint_t
-# undef _@GUARD_PREFIX@_STDDEF_H
-# define _GL_STDDEF_WINT_T
-# endif
-# @INCLUDE_NEXT@ @NEXT_STDDEF_H@
-# endif
-
-#else
-/* Normal invocation convention. */
-
-# ifndef _@GUARD_PREFIX@_STDDEF_H
-
-/* The include_next requires a split double-inclusion guard. */
-
-# @INCLUDE_NEXT@ @NEXT_STDDEF_H@
-
-# ifndef _@GUARD_PREFIX@_STDDEF_H
-# define _@GUARD_PREFIX@_STDDEF_H
-
-/* On NetBSD 5.0, the definition of NULL lacks proper parentheses. */
-#if @REPLACE_NULL@
-# undef NULL
-# ifdef __cplusplus
- /* ISO C++ says that the macro NULL must expand to an integer constant
- expression, hence '((void *) 0)' is not allowed in C++. */
-# if __GNUG__ >= 3
- /* GNU C++ has a __null macro that behaves like an integer ('int' or
- 'long') but has the same size as a pointer. Use that, to avoid
- warnings. */
-# define NULL __null
-# else
-# define NULL 0L
-# endif
-# else
-# define NULL ((void *) 0)
-# endif
-#endif
-
-/* Some platforms lack wchar_t. */
-#if !@HAVE_WCHAR_T@
-# define wchar_t int
-#endif
-
-# endif /* _@GUARD_PREFIX@_STDDEF_H */
-# endif /* _@GUARD_PREFIX@_STDDEF_H */
-#endif /* __need_XXX */
+++ /dev/null
-/* A GNU-like <stdlib.h>.
-
- Copyright (C) 1995, 2001-2004, 2006-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#if __GNUC__ >= 3
-@PRAGMA_SYSTEM_HEADER@
-#endif
-@PRAGMA_COLUMNS@
-
-#if defined __need_malloc_and_calloc
-/* Special invocation convention inside glibc header files. */
-
-#@INCLUDE_NEXT@ @NEXT_STDLIB_H@
-
-#else
-/* Normal invocation convention. */
-
-#ifndef _@GUARD_PREFIX@_STDLIB_H
-
-/* The include_next requires a split double-inclusion guard. */
-#@INCLUDE_NEXT@ @NEXT_STDLIB_H@
-
-#ifndef _@GUARD_PREFIX@_STDLIB_H
-#define _@GUARD_PREFIX@_STDLIB_H
-
-/* NetBSD 5.0 mis-defines NULL. */
-#include <stddef.h>
-
-/* MirBSD 10 defines WEXITSTATUS in <sys/wait.h>, not in <stdlib.h>. */
-#if @GNULIB_SYSTEM_POSIX@ && !defined WEXITSTATUS
-# include <sys/wait.h>
-#endif
-
-/* Solaris declares getloadavg() in <sys/loadavg.h>. */
-#if (@GNULIB_GETLOADAVG@ || defined GNULIB_POSIXCHECK) && @HAVE_SYS_LOADAVG_H@
-# include <sys/loadavg.h>
-#endif
-
-/* Native Windows platforms declare mktemp() in <io.h>. */
-#if 0 && ((defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__)
-# include <io.h>
-#endif
-
-#if @GNULIB_RANDOM_R@
-
-/* OSF/1 5.1 declares 'struct random_data' in <random.h>, which is included
- from <stdlib.h> if _REENTRANT is defined. Include it whenever we need
- 'struct random_data'. */
-# if @HAVE_RANDOM_H@
-# include <random.h>
-# endif
-
-# if !@HAVE_STRUCT_RANDOM_DATA@ || @REPLACE_RANDOM_R@ || !@HAVE_RANDOM_R@
-# include <stdint.h>
-# endif
-
-# if !@HAVE_STRUCT_RANDOM_DATA@
-/* Define 'struct random_data'.
- But allow multiple gnulib generated <stdlib.h> replacements to coexist. */
-# if !GNULIB_defined_struct_random_data
-struct random_data
-{
- int32_t *fptr; /* Front pointer. */
- int32_t *rptr; /* Rear pointer. */
- int32_t *state; /* Array of state values. */
- int rand_type; /* Type of random number generator. */
- int rand_deg; /* Degree of random number generator. */
- int rand_sep; /* Distance between front and rear. */
- int32_t *end_ptr; /* Pointer behind state table. */
-};
-# define GNULIB_defined_struct_random_data 1
-# endif
-# endif
-#endif
-
-#if (@GNULIB_MKSTEMP@ || @GNULIB_MKSTEMPS@ || @GNULIB_GETSUBOPT@ || defined GNULIB_POSIXCHECK) && ! defined __GLIBC__ && !((defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__)
-/* On MacOS X 10.3, only <unistd.h> declares mkstemp. */
-/* On MacOS X 10.5, only <unistd.h> declares mkstemps. */
-/* On Cygwin 1.7.1, only <unistd.h> declares getsubopt. */
-/* But avoid namespace pollution on glibc systems and native Windows. */
-# include <unistd.h>
-#endif
-
-/* The __attribute__ feature is available in gcc versions 2.5 and later.
- The attribute __pure__ was added in gcc 2.96. */
-#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96)
-# define _GL_ATTRIBUTE_PURE __attribute__ ((__pure__))
-#else
-# define _GL_ATTRIBUTE_PURE /* empty */
-#endif
-
-/* The definition of _Noreturn is copied here. */
-
-/* The definitions of _GL_FUNCDECL_RPL etc. are copied here. */
-
-/* The definition of _GL_ARG_NONNULL is copied here. */
-
-/* The definition of _GL_WARN_ON_USE is copied here. */
-
-
-/* Some systems do not define EXIT_*, despite otherwise supporting C89. */
-#ifndef EXIT_SUCCESS
-# define EXIT_SUCCESS 0
-#endif
-/* Tandem/NSK and other platforms that define EXIT_FAILURE as -1 interfere
- with proper operation of xargs. */
-#ifndef EXIT_FAILURE
-# define EXIT_FAILURE 1
-#elif EXIT_FAILURE != 1
-# undef EXIT_FAILURE
-# define EXIT_FAILURE 1
-#endif
-
-
-#if @GNULIB__EXIT@
-/* Terminate the current process with the given return code, without running
- the 'atexit' handlers. */
-# if !@HAVE__EXIT@
-_GL_FUNCDECL_SYS (_Exit, _Noreturn void, (int status));
-# endif
-_GL_CXXALIAS_SYS (_Exit, void, (int status));
-_GL_CXXALIASWARN (_Exit);
-#elif defined GNULIB_POSIXCHECK
-# undef _Exit
-# if HAVE_RAW_DECL__EXIT
-_GL_WARN_ON_USE (_Exit, "_Exit is unportable - "
- "use gnulib module _Exit for portability");
-# endif
-#endif
-
-
-#if @GNULIB_ATOLL@
-/* Parse a signed decimal integer.
- Returns the value of the integer. Errors are not detected. */
-# if !@HAVE_ATOLL@
-_GL_FUNCDECL_SYS (atoll, long long, (const char *string)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (atoll, long long, (const char *string));
-_GL_CXXALIASWARN (atoll);
-#elif defined GNULIB_POSIXCHECK
-# undef atoll
-# if HAVE_RAW_DECL_ATOLL
-_GL_WARN_ON_USE (atoll, "atoll is unportable - "
- "use gnulib module atoll for portability");
-# endif
-#endif
-
-#if @GNULIB_CALLOC_POSIX@
-# if @REPLACE_CALLOC@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef calloc
-# define calloc rpl_calloc
-# endif
-_GL_FUNCDECL_RPL (calloc, void *, (size_t nmemb, size_t size));
-_GL_CXXALIAS_RPL (calloc, void *, (size_t nmemb, size_t size));
-# else
-_GL_CXXALIAS_SYS (calloc, void *, (size_t nmemb, size_t size));
-# endif
-_GL_CXXALIASWARN (calloc);
-#elif defined GNULIB_POSIXCHECK
-# undef calloc
-/* Assume calloc is always declared. */
-_GL_WARN_ON_USE (calloc, "calloc is not POSIX compliant everywhere - "
- "use gnulib module calloc-posix for portability");
-#endif
-
-#if @GNULIB_CANONICALIZE_FILE_NAME@
-# if @REPLACE_CANONICALIZE_FILE_NAME@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define canonicalize_file_name rpl_canonicalize_file_name
-# endif
-_GL_FUNCDECL_RPL (canonicalize_file_name, char *, (const char *name)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (canonicalize_file_name, char *, (const char *name));
-# else
-# if !@HAVE_CANONICALIZE_FILE_NAME@
-_GL_FUNCDECL_SYS (canonicalize_file_name, char *, (const char *name)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (canonicalize_file_name, char *, (const char *name));
-# endif
-_GL_CXXALIASWARN (canonicalize_file_name);
-#elif defined GNULIB_POSIXCHECK
-# undef canonicalize_file_name
-# if HAVE_RAW_DECL_CANONICALIZE_FILE_NAME
-_GL_WARN_ON_USE (canonicalize_file_name,
- "canonicalize_file_name is unportable - "
- "use gnulib module canonicalize-lgpl for portability");
-# endif
-#endif
-
-#if @GNULIB_GETLOADAVG@
-/* Store max(NELEM,3) load average numbers in LOADAVG[].
- The three numbers are the load average of the last 1 minute, the last 5
- minutes, and the last 15 minutes, respectively.
- LOADAVG is an array of NELEM numbers. */
-# if !@HAVE_DECL_GETLOADAVG@
-_GL_FUNCDECL_SYS (getloadavg, int, (double loadavg[], int nelem)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (getloadavg, int, (double loadavg[], int nelem));
-_GL_CXXALIASWARN (getloadavg);
-#elif defined GNULIB_POSIXCHECK
-# undef getloadavg
-# if HAVE_RAW_DECL_GETLOADAVG
-_GL_WARN_ON_USE (getloadavg, "getloadavg is not portable - "
- "use gnulib module getloadavg for portability");
-# endif
-#endif
-
-#if @GNULIB_GETSUBOPT@
-/* Assuming *OPTIONP is a comma separated list of elements of the form
- "token" or "token=value", getsubopt parses the first of these elements.
- If the first element refers to a "token" that is member of the given
- NULL-terminated array of tokens:
- - It replaces the comma with a NUL byte, updates *OPTIONP to point past
- the first option and the comma, sets *VALUEP to the value of the
- element (or NULL if it doesn't contain an "=" sign),
- - It returns the index of the "token" in the given array of tokens.
- Otherwise it returns -1, and *OPTIONP and *VALUEP are undefined.
- For more details see the POSIX:2001 specification.
- http://www.opengroup.org/susv3xsh/getsubopt.html */
-# if !@HAVE_GETSUBOPT@
-_GL_FUNCDECL_SYS (getsubopt, int,
- (char **optionp, char *const *tokens, char **valuep)
- _GL_ARG_NONNULL ((1, 2, 3)));
-# endif
-_GL_CXXALIAS_SYS (getsubopt, int,
- (char **optionp, char *const *tokens, char **valuep));
-_GL_CXXALIASWARN (getsubopt);
-#elif defined GNULIB_POSIXCHECK
-# undef getsubopt
-# if HAVE_RAW_DECL_GETSUBOPT
-_GL_WARN_ON_USE (getsubopt, "getsubopt is unportable - "
- "use gnulib module getsubopt for portability");
-# endif
-#endif
-
-#if @GNULIB_GRANTPT@
-/* Change the ownership and access permission of the slave side of the
- pseudo-terminal whose master side is specified by FD. */
-# if !@HAVE_GRANTPT@
-_GL_FUNCDECL_SYS (grantpt, int, (int fd));
-# endif
-_GL_CXXALIAS_SYS (grantpt, int, (int fd));
-_GL_CXXALIASWARN (grantpt);
-#elif defined GNULIB_POSIXCHECK
-# undef grantpt
-# if HAVE_RAW_DECL_GRANTPT
-_GL_WARN_ON_USE (grantpt, "grantpt is not portable - "
- "use gnulib module grantpt for portability");
-# endif
-#endif
-
-/* If _GL_USE_STDLIB_ALLOC is nonzero, the including module does not
- rely on GNU or POSIX semantics for malloc and realloc (for example,
- by never specifying a zero size), so it does not need malloc or
- realloc to be redefined. */
-#if @GNULIB_MALLOC_POSIX@
-# if @REPLACE_MALLOC@
-# if !((defined __cplusplus && defined GNULIB_NAMESPACE) \
- || _GL_USE_STDLIB_ALLOC)
-# undef malloc
-# define malloc rpl_malloc
-# endif
-_GL_FUNCDECL_RPL (malloc, void *, (size_t size));
-_GL_CXXALIAS_RPL (malloc, void *, (size_t size));
-# else
-_GL_CXXALIAS_SYS (malloc, void *, (size_t size));
-# endif
-_GL_CXXALIASWARN (malloc);
-#elif defined GNULIB_POSIXCHECK && !_GL_USE_STDLIB_ALLOC
-# undef malloc
-/* Assume malloc is always declared. */
-_GL_WARN_ON_USE (malloc, "malloc is not POSIX compliant everywhere - "
- "use gnulib module malloc-posix for portability");
-#endif
-
-/* Convert a multibyte character to a wide character. */
-#if @GNULIB_MBTOWC@
-# if @REPLACE_MBTOWC@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef mbtowc
-# define mbtowc rpl_mbtowc
-# endif
-_GL_FUNCDECL_RPL (mbtowc, int, (wchar_t *pwc, const char *s, size_t n));
-_GL_CXXALIAS_RPL (mbtowc, int, (wchar_t *pwc, const char *s, size_t n));
-# else
-_GL_CXXALIAS_SYS (mbtowc, int, (wchar_t *pwc, const char *s, size_t n));
-# endif
-_GL_CXXALIASWARN (mbtowc);
-#endif
-
-#if @GNULIB_MKDTEMP@
-/* Create a unique temporary directory from TEMPLATE.
- The last six characters of TEMPLATE must be "XXXXXX";
- they are replaced with a string that makes the directory name unique.
- Returns TEMPLATE, or a null pointer if it cannot get a unique name.
- The directory is created mode 700. */
-# if !@HAVE_MKDTEMP@
-_GL_FUNCDECL_SYS (mkdtemp, char *, (char * /*template*/) _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (mkdtemp, char *, (char * /*template*/));
-_GL_CXXALIASWARN (mkdtemp);
-#elif defined GNULIB_POSIXCHECK
-# undef mkdtemp
-# if HAVE_RAW_DECL_MKDTEMP
-_GL_WARN_ON_USE (mkdtemp, "mkdtemp is unportable - "
- "use gnulib module mkdtemp for portability");
-# endif
-#endif
-
-#if @GNULIB_MKOSTEMP@
-/* Create a unique temporary file from TEMPLATE.
- The last six characters of TEMPLATE must be "XXXXXX";
- they are replaced with a string that makes the file name unique.
- The flags are a bitmask, possibly including O_CLOEXEC (defined in <fcntl.h>)
- and O_TEXT, O_BINARY (defined in "binary-io.h").
- The file is then created, with the specified flags, ensuring it didn't exist
- before.
- The file is created read-write (mask at least 0600 & ~umask), but it may be
- world-readable and world-writable (mask 0666 & ~umask), depending on the
- implementation.
- Returns the open file descriptor if successful, otherwise -1 and errno
- set. */
-# if !@HAVE_MKOSTEMP@
-_GL_FUNCDECL_SYS (mkostemp, int, (char * /*template*/, int /*flags*/)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (mkostemp, int, (char * /*template*/, int /*flags*/));
-_GL_CXXALIASWARN (mkostemp);
-#elif defined GNULIB_POSIXCHECK
-# undef mkostemp
-# if HAVE_RAW_DECL_MKOSTEMP
-_GL_WARN_ON_USE (mkostemp, "mkostemp is unportable - "
- "use gnulib module mkostemp for portability");
-# endif
-#endif
-
-#if @GNULIB_MKOSTEMPS@
-/* Create a unique temporary file from TEMPLATE.
- The last six characters of TEMPLATE before a suffix of length
- SUFFIXLEN must be "XXXXXX";
- they are replaced with a string that makes the file name unique.
- The flags are a bitmask, possibly including O_CLOEXEC (defined in <fcntl.h>)
- and O_TEXT, O_BINARY (defined in "binary-io.h").
- The file is then created, with the specified flags, ensuring it didn't exist
- before.
- The file is created read-write (mask at least 0600 & ~umask), but it may be
- world-readable and world-writable (mask 0666 & ~umask), depending on the
- implementation.
- Returns the open file descriptor if successful, otherwise -1 and errno
- set. */
-# if !@HAVE_MKOSTEMPS@
-_GL_FUNCDECL_SYS (mkostemps, int,
- (char * /*template*/, int /*suffixlen*/, int /*flags*/)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (mkostemps, int,
- (char * /*template*/, int /*suffixlen*/, int /*flags*/));
-_GL_CXXALIASWARN (mkostemps);
-#elif defined GNULIB_POSIXCHECK
-# undef mkostemps
-# if HAVE_RAW_DECL_MKOSTEMPS
-_GL_WARN_ON_USE (mkostemps, "mkostemps is unportable - "
- "use gnulib module mkostemps for portability");
-# endif
-#endif
-
-#if @GNULIB_MKSTEMP@
-/* Create a unique temporary file from TEMPLATE.
- The last six characters of TEMPLATE must be "XXXXXX";
- they are replaced with a string that makes the file name unique.
- The file is then created, ensuring it didn't exist before.
- The file is created read-write (mask at least 0600 & ~umask), but it may be
- world-readable and world-writable (mask 0666 & ~umask), depending on the
- implementation.
- Returns the open file descriptor if successful, otherwise -1 and errno
- set. */
-# if @REPLACE_MKSTEMP@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define mkstemp rpl_mkstemp
-# endif
-_GL_FUNCDECL_RPL (mkstemp, int, (char * /*template*/) _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (mkstemp, int, (char * /*template*/));
-# else
-# if ! @HAVE_MKSTEMP@
-_GL_FUNCDECL_SYS (mkstemp, int, (char * /*template*/) _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (mkstemp, int, (char * /*template*/));
-# endif
-_GL_CXXALIASWARN (mkstemp);
-#elif defined GNULIB_POSIXCHECK
-# undef mkstemp
-# if HAVE_RAW_DECL_MKSTEMP
-_GL_WARN_ON_USE (mkstemp, "mkstemp is unportable - "
- "use gnulib module mkstemp for portability");
-# endif
-#endif
-
-#if @GNULIB_MKSTEMPS@
-/* Create a unique temporary file from TEMPLATE.
- The last six characters of TEMPLATE prior to a suffix of length
- SUFFIXLEN must be "XXXXXX";
- they are replaced with a string that makes the file name unique.
- The file is then created, ensuring it didn't exist before.
- The file is created read-write (mask at least 0600 & ~umask), but it may be
- world-readable and world-writable (mask 0666 & ~umask), depending on the
- implementation.
- Returns the open file descriptor if successful, otherwise -1 and errno
- set. */
-# if !@HAVE_MKSTEMPS@
-_GL_FUNCDECL_SYS (mkstemps, int, (char * /*template*/, int /*suffixlen*/)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (mkstemps, int, (char * /*template*/, int /*suffixlen*/));
-_GL_CXXALIASWARN (mkstemps);
-#elif defined GNULIB_POSIXCHECK
-# undef mkstemps
-# if HAVE_RAW_DECL_MKSTEMPS
-_GL_WARN_ON_USE (mkstemps, "mkstemps is unportable - "
- "use gnulib module mkstemps for portability");
-# endif
-#endif
-
-#if @GNULIB_POSIX_OPENPT@
-/* Return an FD open to the master side of a pseudo-terminal. Flags should
- include O_RDWR, and may also include O_NOCTTY. */
-# if !@HAVE_POSIX_OPENPT@
-_GL_FUNCDECL_SYS (posix_openpt, int, (int flags));
-# endif
-_GL_CXXALIAS_SYS (posix_openpt, int, (int flags));
-_GL_CXXALIASWARN (posix_openpt);
-#elif defined GNULIB_POSIXCHECK
-# undef posix_openpt
-# if HAVE_RAW_DECL_POSIX_OPENPT
-_GL_WARN_ON_USE (posix_openpt, "posix_openpt is not portable - "
- "use gnulib module posix_openpt for portability");
-# endif
-#endif
-
-#if @GNULIB_PTSNAME@
-/* Return the pathname of the pseudo-terminal slave associated with
- the master FD is open on, or NULL on errors. */
-# if !@HAVE_PTSNAME@
-_GL_FUNCDECL_SYS (ptsname, char *, (int fd));
-# endif
-_GL_CXXALIAS_SYS (ptsname, char *, (int fd));
-_GL_CXXALIASWARN (ptsname);
-#elif defined GNULIB_POSIXCHECK
-# undef ptsname
-# if HAVE_RAW_DECL_PTSNAME
-_GL_WARN_ON_USE (ptsname, "ptsname is not portable - "
- "use gnulib module ptsname for portability");
-# endif
-#endif
-
-#if @GNULIB_PTSNAME_R@
-/* Set the pathname of the pseudo-terminal slave associated with
- the master FD is open on and return 0, or set errno and return
- non-zero on errors. */
-# if @REPLACE_PTSNAME_R@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef ptsname_r
-# define ptsname_r rpl_ptsname_r
-# endif
-_GL_FUNCDECL_RPL (ptsname_r, int, (int fd, char *buf, size_t len));
-_GL_CXXALIAS_RPL (ptsname_r, int, (int fd, char *buf, size_t len));
-# else
-# if !@HAVE_PTSNAME_R@
-_GL_FUNCDECL_SYS (ptsname_r, int, (int fd, char *buf, size_t len));
-# endif
-_GL_CXXALIAS_SYS (ptsname_r, int, (int fd, char *buf, size_t len));
-# endif
-_GL_CXXALIASWARN (ptsname_r);
-#elif defined GNULIB_POSIXCHECK
-# undef ptsname_r
-# if HAVE_RAW_DECL_PTSNAME_R
-_GL_WARN_ON_USE (ptsname_r, "ptsname_r is not portable - "
- "use gnulib module ptsname_r for portability");
-# endif
-#endif
-
-#if @GNULIB_PUTENV@
-# if @REPLACE_PUTENV@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef putenv
-# define putenv rpl_putenv
-# endif
-_GL_FUNCDECL_RPL (putenv, int, (char *string) _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (putenv, int, (char *string));
-# else
-_GL_CXXALIAS_SYS (putenv, int, (char *string));
-# endif
-_GL_CXXALIASWARN (putenv);
-#endif
-
-
-#if @GNULIB_RANDOM_R@
-# if !@HAVE_RANDOM_R@
-# ifndef RAND_MAX
-# define RAND_MAX 2147483647
-# endif
-# endif
-#endif
-
-
-#if @GNULIB_RANDOM@
-# if !@HAVE_RANDOM@
-_GL_FUNCDECL_SYS (random, long, (void));
-# endif
-_GL_CXXALIAS_SYS (random, long, (void));
-_GL_CXXALIASWARN (random);
-#elif defined GNULIB_POSIXCHECK
-# undef random
-# if HAVE_RAW_DECL_RANDOM
-_GL_WARN_ON_USE (random, "random is unportable - "
- "use gnulib module random for portability");
-# endif
-#endif
-
-#if @GNULIB_RANDOM@
-# if !@HAVE_RANDOM@
-_GL_FUNCDECL_SYS (srandom, void, (unsigned int seed));
-# endif
-_GL_CXXALIAS_SYS (srandom, void, (unsigned int seed));
-_GL_CXXALIASWARN (srandom);
-#elif defined GNULIB_POSIXCHECK
-# undef srandom
-# if HAVE_RAW_DECL_SRANDOM
-_GL_WARN_ON_USE (srandom, "srandom is unportable - "
- "use gnulib module random for portability");
-# endif
-#endif
-
-#if @GNULIB_RANDOM@
-# if !@HAVE_RANDOM@
-_GL_FUNCDECL_SYS (initstate, char *,
- (unsigned int seed, char *buf, size_t buf_size)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (initstate, char *,
- (unsigned int seed, char *buf, size_t buf_size));
-_GL_CXXALIASWARN (initstate);
-#elif defined GNULIB_POSIXCHECK
-# undef initstate
-# if HAVE_RAW_DECL_INITSTATE_R
-_GL_WARN_ON_USE (initstate, "initstate is unportable - "
- "use gnulib module random for portability");
-# endif
-#endif
-
-#if @GNULIB_RANDOM@
-# if !@HAVE_RANDOM@
-_GL_FUNCDECL_SYS (setstate, char *, (char *arg_state) _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (setstate, char *, (char *arg_state));
-_GL_CXXALIASWARN (setstate);
-#elif defined GNULIB_POSIXCHECK
-# undef setstate
-# if HAVE_RAW_DECL_SETSTATE_R
-_GL_WARN_ON_USE (setstate, "setstate is unportable - "
- "use gnulib module random for portability");
-# endif
-#endif
-
-
-#if @GNULIB_RANDOM_R@
-# if @REPLACE_RANDOM_R@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef random_r
-# define random_r rpl_random_r
-# endif
-_GL_FUNCDECL_RPL (random_r, int, (struct random_data *buf, int32_t *result)
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (random_r, int, (struct random_data *buf, int32_t *result));
-# else
-# if !@HAVE_RANDOM_R@
-_GL_FUNCDECL_SYS (random_r, int, (struct random_data *buf, int32_t *result)
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (random_r, int, (struct random_data *buf, int32_t *result));
-# endif
-_GL_CXXALIASWARN (random_r);
-#elif defined GNULIB_POSIXCHECK
-# undef random_r
-# if HAVE_RAW_DECL_RANDOM_R
-_GL_WARN_ON_USE (random_r, "random_r is unportable - "
- "use gnulib module random_r for portability");
-# endif
-#endif
-
-#if @GNULIB_RANDOM_R@
-# if @REPLACE_RANDOM_R@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef srandom_r
-# define srandom_r rpl_srandom_r
-# endif
-_GL_FUNCDECL_RPL (srandom_r, int,
- (unsigned int seed, struct random_data *rand_state)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (srandom_r, int,
- (unsigned int seed, struct random_data *rand_state));
-# else
-# if !@HAVE_RANDOM_R@
-_GL_FUNCDECL_SYS (srandom_r, int,
- (unsigned int seed, struct random_data *rand_state)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (srandom_r, int,
- (unsigned int seed, struct random_data *rand_state));
-# endif
-_GL_CXXALIASWARN (srandom_r);
-#elif defined GNULIB_POSIXCHECK
-# undef srandom_r
-# if HAVE_RAW_DECL_SRANDOM_R
-_GL_WARN_ON_USE (srandom_r, "srandom_r is unportable - "
- "use gnulib module random_r for portability");
-# endif
-#endif
-
-#if @GNULIB_RANDOM_R@
-# if @REPLACE_RANDOM_R@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef initstate_r
-# define initstate_r rpl_initstate_r
-# endif
-_GL_FUNCDECL_RPL (initstate_r, int,
- (unsigned int seed, char *buf, size_t buf_size,
- struct random_data *rand_state)
- _GL_ARG_NONNULL ((2, 4)));
-_GL_CXXALIAS_RPL (initstate_r, int,
- (unsigned int seed, char *buf, size_t buf_size,
- struct random_data *rand_state));
-# else
-# if !@HAVE_RANDOM_R@
-_GL_FUNCDECL_SYS (initstate_r, int,
- (unsigned int seed, char *buf, size_t buf_size,
- struct random_data *rand_state)
- _GL_ARG_NONNULL ((2, 4)));
-# endif
-_GL_CXXALIAS_SYS (initstate_r, int,
- (unsigned int seed, char *buf, size_t buf_size,
- struct random_data *rand_state));
-# endif
-_GL_CXXALIASWARN (initstate_r);
-#elif defined GNULIB_POSIXCHECK
-# undef initstate_r
-# if HAVE_RAW_DECL_INITSTATE_R
-_GL_WARN_ON_USE (initstate_r, "initstate_r is unportable - "
- "use gnulib module random_r for portability");
-# endif
-#endif
-
-#if @GNULIB_RANDOM_R@
-# if @REPLACE_RANDOM_R@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef setstate_r
-# define setstate_r rpl_setstate_r
-# endif
-_GL_FUNCDECL_RPL (setstate_r, int,
- (char *arg_state, struct random_data *rand_state)
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (setstate_r, int,
- (char *arg_state, struct random_data *rand_state));
-# else
-# if !@HAVE_RANDOM_R@
-_GL_FUNCDECL_SYS (setstate_r, int,
- (char *arg_state, struct random_data *rand_state)
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (setstate_r, int,
- (char *arg_state, struct random_data *rand_state));
-# endif
-_GL_CXXALIASWARN (setstate_r);
-#elif defined GNULIB_POSIXCHECK
-# undef setstate_r
-# if HAVE_RAW_DECL_SETSTATE_R
-_GL_WARN_ON_USE (setstate_r, "setstate_r is unportable - "
- "use gnulib module random_r for portability");
-# endif
-#endif
-
-
-#if @GNULIB_REALLOC_POSIX@
-# if @REPLACE_REALLOC@
-# if !((defined __cplusplus && defined GNULIB_NAMESPACE) \
- || _GL_USE_STDLIB_ALLOC)
-# undef realloc
-# define realloc rpl_realloc
-# endif
-_GL_FUNCDECL_RPL (realloc, void *, (void *ptr, size_t size));
-_GL_CXXALIAS_RPL (realloc, void *, (void *ptr, size_t size));
-# else
-_GL_CXXALIAS_SYS (realloc, void *, (void *ptr, size_t size));
-# endif
-_GL_CXXALIASWARN (realloc);
-#elif defined GNULIB_POSIXCHECK && !_GL_USE_STDLIB_ALLOC
-# undef realloc
-/* Assume realloc is always declared. */
-_GL_WARN_ON_USE (realloc, "realloc is not POSIX compliant everywhere - "
- "use gnulib module realloc-posix for portability");
-#endif
-
-#if @GNULIB_REALPATH@
-# if @REPLACE_REALPATH@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define realpath rpl_realpath
-# endif
-_GL_FUNCDECL_RPL (realpath, char *, (const char *name, char *resolved)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (realpath, char *, (const char *name, char *resolved));
-# else
-# if !@HAVE_REALPATH@
-_GL_FUNCDECL_SYS (realpath, char *, (const char *name, char *resolved)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (realpath, char *, (const char *name, char *resolved));
-# endif
-_GL_CXXALIASWARN (realpath);
-#elif defined GNULIB_POSIXCHECK
-# undef realpath
-# if HAVE_RAW_DECL_REALPATH
-_GL_WARN_ON_USE (realpath, "realpath is unportable - use gnulib module "
- "canonicalize or canonicalize-lgpl for portability");
-# endif
-#endif
-
-#if @GNULIB_RPMATCH@
-/* Test a user response to a question.
- Return 1 if it is affirmative, 0 if it is negative, or -1 if not clear. */
-# if !@HAVE_RPMATCH@
-_GL_FUNCDECL_SYS (rpmatch, int, (const char *response) _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (rpmatch, int, (const char *response));
-_GL_CXXALIASWARN (rpmatch);
-#elif defined GNULIB_POSIXCHECK
-# undef rpmatch
-# if HAVE_RAW_DECL_RPMATCH
-_GL_WARN_ON_USE (rpmatch, "rpmatch is unportable - "
- "use gnulib module rpmatch for portability");
-# endif
-#endif
-
-#if @GNULIB_SETENV@
-/* Set NAME to VALUE in the environment.
- If REPLACE is nonzero, overwrite an existing value. */
-# if @REPLACE_SETENV@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef setenv
-# define setenv rpl_setenv
-# endif
-_GL_FUNCDECL_RPL (setenv, int,
- (const char *name, const char *value, int replace)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (setenv, int,
- (const char *name, const char *value, int replace));
-# else
-# if !@HAVE_DECL_SETENV@
-_GL_FUNCDECL_SYS (setenv, int,
- (const char *name, const char *value, int replace)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (setenv, int,
- (const char *name, const char *value, int replace));
-# endif
-# if !(@REPLACE_SETENV@ && !@HAVE_DECL_SETENV@)
-_GL_CXXALIASWARN (setenv);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef setenv
-# if HAVE_RAW_DECL_SETENV
-_GL_WARN_ON_USE (setenv, "setenv is unportable - "
- "use gnulib module setenv for portability");
-# endif
-#endif
-
-#if @GNULIB_STRTOD@
- /* Parse a double from STRING, updating ENDP if appropriate. */
-# if @REPLACE_STRTOD@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define strtod rpl_strtod
-# endif
-_GL_FUNCDECL_RPL (strtod, double, (const char *str, char **endp)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (strtod, double, (const char *str, char **endp));
-# else
-# if !@HAVE_STRTOD@
-_GL_FUNCDECL_SYS (strtod, double, (const char *str, char **endp)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (strtod, double, (const char *str, char **endp));
-# endif
-_GL_CXXALIASWARN (strtod);
-#elif defined GNULIB_POSIXCHECK
-# undef strtod
-# if HAVE_RAW_DECL_STRTOD
-_GL_WARN_ON_USE (strtod, "strtod is unportable - "
- "use gnulib module strtod for portability");
-# endif
-#endif
-
-#if @GNULIB_STRTOLL@
-/* Parse a signed integer whose textual representation starts at STRING.
- The integer is expected to be in base BASE (2 <= BASE <= 36); if BASE == 0,
- it may be decimal or octal (with prefix "0") or hexadecimal (with prefix
- "0x").
- If ENDPTR is not NULL, the address of the first byte after the integer is
- stored in *ENDPTR.
- Upon overflow, the return value is LLONG_MAX or LLONG_MIN, and errno is set
- to ERANGE. */
-# if !@HAVE_STRTOLL@
-_GL_FUNCDECL_SYS (strtoll, long long,
- (const char *string, char **endptr, int base)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (strtoll, long long,
- (const char *string, char **endptr, int base));
-_GL_CXXALIASWARN (strtoll);
-#elif defined GNULIB_POSIXCHECK
-# undef strtoll
-# if HAVE_RAW_DECL_STRTOLL
-_GL_WARN_ON_USE (strtoll, "strtoll is unportable - "
- "use gnulib module strtoll for portability");
-# endif
-#endif
-
-#if @GNULIB_STRTOULL@
-/* Parse an unsigned integer whose textual representation starts at STRING.
- The integer is expected to be in base BASE (2 <= BASE <= 36); if BASE == 0,
- it may be decimal or octal (with prefix "0") or hexadecimal (with prefix
- "0x").
- If ENDPTR is not NULL, the address of the first byte after the integer is
- stored in *ENDPTR.
- Upon overflow, the return value is ULLONG_MAX, and errno is set to
- ERANGE. */
-# if !@HAVE_STRTOULL@
-_GL_FUNCDECL_SYS (strtoull, unsigned long long,
- (const char *string, char **endptr, int base)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (strtoull, unsigned long long,
- (const char *string, char **endptr, int base));
-_GL_CXXALIASWARN (strtoull);
-#elif defined GNULIB_POSIXCHECK
-# undef strtoull
-# if HAVE_RAW_DECL_STRTOULL
-_GL_WARN_ON_USE (strtoull, "strtoull is unportable - "
- "use gnulib module strtoull for portability");
-# endif
-#endif
-
-#if @GNULIB_UNLOCKPT@
-/* Unlock the slave side of the pseudo-terminal whose master side is specified
- by FD, so that it can be opened. */
-# if !@HAVE_UNLOCKPT@
-_GL_FUNCDECL_SYS (unlockpt, int, (int fd));
-# endif
-_GL_CXXALIAS_SYS (unlockpt, int, (int fd));
-_GL_CXXALIASWARN (unlockpt);
-#elif defined GNULIB_POSIXCHECK
-# undef unlockpt
-# if HAVE_RAW_DECL_UNLOCKPT
-_GL_WARN_ON_USE (unlockpt, "unlockpt is not portable - "
- "use gnulib module unlockpt for portability");
-# endif
-#endif
-
-#if @GNULIB_UNSETENV@
-/* Remove the variable NAME from the environment. */
-# if @REPLACE_UNSETENV@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef unsetenv
-# define unsetenv rpl_unsetenv
-# endif
-_GL_FUNCDECL_RPL (unsetenv, int, (const char *name) _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (unsetenv, int, (const char *name));
-# else
-# if !@HAVE_DECL_UNSETENV@
-_GL_FUNCDECL_SYS (unsetenv, int, (const char *name) _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (unsetenv, int, (const char *name));
-# endif
-# if !(@REPLACE_UNSETENV@ && !@HAVE_DECL_UNSETENV@)
-_GL_CXXALIASWARN (unsetenv);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef unsetenv
-# if HAVE_RAW_DECL_UNSETENV
-_GL_WARN_ON_USE (unsetenv, "unsetenv is unportable - "
- "use gnulib module unsetenv for portability");
-# endif
-#endif
-
-/* Convert a wide character to a multibyte character. */
-#if @GNULIB_WCTOMB@
-# if @REPLACE_WCTOMB@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef wctomb
-# define wctomb rpl_wctomb
-# endif
-_GL_FUNCDECL_RPL (wctomb, int, (char *s, wchar_t wc));
-_GL_CXXALIAS_RPL (wctomb, int, (char *s, wchar_t wc));
-# else
-_GL_CXXALIAS_SYS (wctomb, int, (char *s, wchar_t wc));
-# endif
-_GL_CXXALIASWARN (wctomb);
-#endif
-
-
-#endif /* _@GUARD_PREFIX@_STDLIB_H */
-#endif /* _@GUARD_PREFIX@_STDLIB_H */
-#endif
+++ /dev/null
-/* Optimized string comparison.
- Copyright (C) 2001-2002, 2007, 2009-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published
- by the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Bruno Haible <bruno@clisp.org>. */
-
-#ifndef _GL_STREQ_H
-#define _GL_STREQ_H
-
-#include <string.h>
-
-/* STREQ_OPT allows to optimize string comparison with a small literal string.
- STREQ_OPT (s, "EUC-KR", 'E', 'U', 'C', '-', 'K', 'R', 0, 0, 0)
- is semantically equivalent to
- strcmp (s, "EUC-KR") == 0
- just faster. */
-
-/* Help GCC to generate good code for string comparisons with
- immediate strings. */
-#if defined (__GNUC__) && defined (__OPTIMIZE__)
-
-static inline int
-streq9 (const char *s1, const char *s2)
-{
- return strcmp (s1 + 9, s2 + 9) == 0;
-}
-
-static inline int
-streq8 (const char *s1, const char *s2, char s28)
-{
- if (s1[8] == s28)
- {
- if (s28 == 0)
- return 1;
- else
- return streq9 (s1, s2);
- }
- else
- return 0;
-}
-
-static inline int
-streq7 (const char *s1, const char *s2, char s27, char s28)
-{
- if (s1[7] == s27)
- {
- if (s27 == 0)
- return 1;
- else
- return streq8 (s1, s2, s28);
- }
- else
- return 0;
-}
-
-static inline int
-streq6 (const char *s1, const char *s2, char s26, char s27, char s28)
-{
- if (s1[6] == s26)
- {
- if (s26 == 0)
- return 1;
- else
- return streq7 (s1, s2, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-streq5 (const char *s1, const char *s2, char s25, char s26, char s27, char s28)
-{
- if (s1[5] == s25)
- {
- if (s25 == 0)
- return 1;
- else
- return streq6 (s1, s2, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-streq4 (const char *s1, const char *s2, char s24, char s25, char s26, char s27, char s28)
-{
- if (s1[4] == s24)
- {
- if (s24 == 0)
- return 1;
- else
- return streq5 (s1, s2, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-streq3 (const char *s1, const char *s2, char s23, char s24, char s25, char s26, char s27, char s28)
-{
- if (s1[3] == s23)
- {
- if (s23 == 0)
- return 1;
- else
- return streq4 (s1, s2, s24, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-streq2 (const char *s1, const char *s2, char s22, char s23, char s24, char s25, char s26, char s27, char s28)
-{
- if (s1[2] == s22)
- {
- if (s22 == 0)
- return 1;
- else
- return streq3 (s1, s2, s23, s24, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-streq1 (const char *s1, const char *s2, char s21, char s22, char s23, char s24, char s25, char s26, char s27, char s28)
-{
- if (s1[1] == s21)
- {
- if (s21 == 0)
- return 1;
- else
- return streq2 (s1, s2, s22, s23, s24, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-static inline int
-streq0 (const char *s1, const char *s2, char s20, char s21, char s22, char s23, char s24, char s25, char s26, char s27, char s28)
-{
- if (s1[0] == s20)
- {
- if (s20 == 0)
- return 1;
- else
- return streq1 (s1, s2, s21, s22, s23, s24, s25, s26, s27, s28);
- }
- else
- return 0;
-}
-
-#define STREQ_OPT(s1,s2,s20,s21,s22,s23,s24,s25,s26,s27,s28) \
- streq0 (s1, s2, s20, s21, s22, s23, s24, s25, s26, s27, s28)
-
-#else
-
-#define STREQ_OPT(s1,s2,s20,s21,s22,s23,s24,s25,s26,s27,s28) \
- (strcmp (s1, s2) == 0)
-
-#endif
-
-#endif /* _GL_STREQ_H */
+++ /dev/null
-/* strerror-override.c --- POSIX compatible system error routine
-
- Copyright (C) 2010-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Bruno Haible <bruno@clisp.org>, 2010. */
-
-#include <config.h>
-
-#include "strerror-override.h"
-
-#include <errno.h>
-
-#if GNULIB_defined_EWINSOCK /* native Windows platforms */
-# if HAVE_WINSOCK2_H
-# include <winsock2.h>
-# endif
-#endif
-
-/* If ERRNUM maps to an errno value defined by gnulib, return a string
- describing the error. Otherwise return NULL. */
-const char *
-strerror_override (int errnum)
-{
- /* These error messages are taken from glibc/sysdeps/gnu/errlist.c. */
- switch (errnum)
- {
-#if REPLACE_STRERROR_0
- case 0:
- return "Success";
-#endif
-
-#if GNULIB_defined_ESOCK /* native Windows platforms with older <errno.h> */
- case EINPROGRESS:
- return "Operation now in progress";
- case EALREADY:
- return "Operation already in progress";
- case ENOTSOCK:
- return "Socket operation on non-socket";
- case EDESTADDRREQ:
- return "Destination address required";
- case EMSGSIZE:
- return "Message too long";
- case EPROTOTYPE:
- return "Protocol wrong type for socket";
- case ENOPROTOOPT:
- return "Protocol not available";
- case EPROTONOSUPPORT:
- return "Protocol not supported";
- case EOPNOTSUPP:
- return "Operation not supported";
- case EAFNOSUPPORT:
- return "Address family not supported by protocol";
- case EADDRINUSE:
- return "Address already in use";
- case EADDRNOTAVAIL:
- return "Cannot assign requested address";
- case ENETDOWN:
- return "Network is down";
- case ENETUNREACH:
- return "Network is unreachable";
- case ECONNRESET:
- return "Connection reset by peer";
- case ENOBUFS:
- return "No buffer space available";
- case EISCONN:
- return "Transport endpoint is already connected";
- case ENOTCONN:
- return "Transport endpoint is not connected";
- case ETIMEDOUT:
- return "Connection timed out";
- case ECONNREFUSED:
- return "Connection refused";
- case ELOOP:
- return "Too many levels of symbolic links";
- case EHOSTUNREACH:
- return "No route to host";
- case EWOULDBLOCK:
- return "Operation would block";
- case ETXTBSY:
- return "Text file busy";
- case ENODATA:
- return "No data available";
- case ENOSR:
- return "Out of streams resources";
- case ENOSTR:
- return "Device not a stream";
- case ENOTRECOVERABLE:
- return "State not recoverable";
- case EOWNERDEAD:
- return "Owner died";
- case ETIME:
- return "Timer expired";
- case EOTHER:
- return "Other error";
-#endif
-#if GNULIB_defined_EWINSOCK /* native Windows platforms */
- case ESOCKTNOSUPPORT:
- return "Socket type not supported";
- case EPFNOSUPPORT:
- return "Protocol family not supported";
- case ESHUTDOWN:
- return "Cannot send after transport endpoint shutdown";
- case ETOOMANYREFS:
- return "Too many references: cannot splice";
- case EHOSTDOWN:
- return "Host is down";
- case EPROCLIM:
- return "Too many processes";
- case EUSERS:
- return "Too many users";
- case EDQUOT:
- return "Disk quota exceeded";
- case ESTALE:
- return "Stale NFS file handle";
- case EREMOTE:
- return "Object is remote";
-# if HAVE_WINSOCK2_H
- /* WSA_INVALID_HANDLE maps to EBADF */
- /* WSA_NOT_ENOUGH_MEMORY maps to ENOMEM */
- /* WSA_INVALID_PARAMETER maps to EINVAL */
- case WSA_OPERATION_ABORTED:
- return "Overlapped operation aborted";
- case WSA_IO_INCOMPLETE:
- return "Overlapped I/O event object not in signaled state";
- case WSA_IO_PENDING:
- return "Overlapped operations will complete later";
- /* WSAEINTR maps to EINTR */
- /* WSAEBADF maps to EBADF */
- /* WSAEACCES maps to EACCES */
- /* WSAEFAULT maps to EFAULT */
- /* WSAEINVAL maps to EINVAL */
- /* WSAEMFILE maps to EMFILE */
- /* WSAEWOULDBLOCK maps to EWOULDBLOCK */
- /* WSAEINPROGRESS maps to EINPROGRESS */
- /* WSAEALREADY maps to EALREADY */
- /* WSAENOTSOCK maps to ENOTSOCK */
- /* WSAEDESTADDRREQ maps to EDESTADDRREQ */
- /* WSAEMSGSIZE maps to EMSGSIZE */
- /* WSAEPROTOTYPE maps to EPROTOTYPE */
- /* WSAENOPROTOOPT maps to ENOPROTOOPT */
- /* WSAEPROTONOSUPPORT maps to EPROTONOSUPPORT */
- /* WSAESOCKTNOSUPPORT is ESOCKTNOSUPPORT */
- /* WSAEOPNOTSUPP maps to EOPNOTSUPP */
- /* WSAEPFNOSUPPORT is EPFNOSUPPORT */
- /* WSAEAFNOSUPPORT maps to EAFNOSUPPORT */
- /* WSAEADDRINUSE maps to EADDRINUSE */
- /* WSAEADDRNOTAVAIL maps to EADDRNOTAVAIL */
- /* WSAENETDOWN maps to ENETDOWN */
- /* WSAENETUNREACH maps to ENETUNREACH */
- /* WSAENETRESET maps to ENETRESET */
- /* WSAECONNABORTED maps to ECONNABORTED */
- /* WSAECONNRESET maps to ECONNRESET */
- /* WSAENOBUFS maps to ENOBUFS */
- /* WSAEISCONN maps to EISCONN */
- /* WSAENOTCONN maps to ENOTCONN */
- /* WSAESHUTDOWN is ESHUTDOWN */
- /* WSAETOOMANYREFS is ETOOMANYREFS */
- /* WSAETIMEDOUT maps to ETIMEDOUT */
- /* WSAECONNREFUSED maps to ECONNREFUSED */
- /* WSAELOOP maps to ELOOP */
- /* WSAENAMETOOLONG maps to ENAMETOOLONG */
- /* WSAEHOSTDOWN is EHOSTDOWN */
- /* WSAEHOSTUNREACH maps to EHOSTUNREACH */
- /* WSAENOTEMPTY maps to ENOTEMPTY */
- /* WSAEPROCLIM is EPROCLIM */
- /* WSAEUSERS is EUSERS */
- /* WSAEDQUOT is EDQUOT */
- /* WSAESTALE is ESTALE */
- /* WSAEREMOTE is EREMOTE */
- case WSASYSNOTREADY:
- return "Network subsystem is unavailable";
- case WSAVERNOTSUPPORTED:
- return "Winsock.dll version out of range";
- case WSANOTINITIALISED:
- return "Successful WSAStartup not yet performed";
- case WSAEDISCON:
- return "Graceful shutdown in progress";
- case WSAENOMORE: case WSA_E_NO_MORE:
- return "No more results";
- case WSAECANCELLED: case WSA_E_CANCELLED:
- return "Call was canceled";
- case WSAEINVALIDPROCTABLE:
- return "Procedure call table is invalid";
- case WSAEINVALIDPROVIDER:
- return "Service provider is invalid";
- case WSAEPROVIDERFAILEDINIT:
- return "Service provider failed to initialize";
- case WSASYSCALLFAILURE:
- return "System call failure";
- case WSASERVICE_NOT_FOUND:
- return "Service not found";
- case WSATYPE_NOT_FOUND:
- return "Class type not found";
- case WSAEREFUSED:
- return "Database query was refused";
- case WSAHOST_NOT_FOUND:
- return "Host not found";
- case WSATRY_AGAIN:
- return "Nonauthoritative host not found";
- case WSANO_RECOVERY:
- return "Nonrecoverable error";
- case WSANO_DATA:
- return "Valid name, no data record of requested type";
- /* WSA_QOS_* omitted */
-# endif
-#endif
-
-#if GNULIB_defined_ENOMSG
- case ENOMSG:
- return "No message of desired type";
-#endif
-
-#if GNULIB_defined_EIDRM
- case EIDRM:
- return "Identifier removed";
-#endif
-
-#if GNULIB_defined_ENOLINK
- case ENOLINK:
- return "Link has been severed";
-#endif
-
-#if GNULIB_defined_EPROTO
- case EPROTO:
- return "Protocol error";
-#endif
-
-#if GNULIB_defined_EMULTIHOP
- case EMULTIHOP:
- return "Multihop attempted";
-#endif
-
-#if GNULIB_defined_EBADMSG
- case EBADMSG:
- return "Bad message";
-#endif
-
-#if GNULIB_defined_EOVERFLOW
- case EOVERFLOW:
- return "Value too large for defined data type";
-#endif
-
-#if GNULIB_defined_ENOTSUP
- case ENOTSUP:
- return "Not supported";
-#endif
-
-#if GNULIB_defined_ENETRESET
- case ENETRESET:
- return "Network dropped connection on reset";
-#endif
-
-#if GNULIB_defined_ECONNABORTED
- case ECONNABORTED:
- return "Software caused connection abort";
-#endif
-
-#if GNULIB_defined_ESTALE
- case ESTALE:
- return "Stale NFS file handle";
-#endif
-
-#if GNULIB_defined_EDQUOT
- case EDQUOT:
- return "Disk quota exceeded";
-#endif
-
-#if GNULIB_defined_ECANCELED
- case ECANCELED:
- return "Operation canceled";
-#endif
-
- default:
- return NULL;
- }
-}
+++ /dev/null
-/* strerror-override.h --- POSIX compatible system error routine
-
- Copyright (C) 2010-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _GL_STRERROR_OVERRIDE_H
-# define _GL_STRERROR_OVERRIDE_H
-
-# include <errno.h>
-# include <stddef.h>
-
-/* Reasonable buffer size that should never trigger ERANGE; if this
- proves too small, we intentionally abort(), to remind us to fix
- this value. */
-# define STACKBUF_LEN 256
-
-/* If ERRNUM maps to an errno value defined by gnulib, return a string
- describing the error. Otherwise return NULL. */
-# if REPLACE_STRERROR_0 \
- || GNULIB_defined_ESOCK \
- || GNULIB_defined_EWINSOCK \
- || GNULIB_defined_ENOMSG \
- || GNULIB_defined_EIDRM \
- || GNULIB_defined_ENOLINK \
- || GNULIB_defined_EPROTO \
- || GNULIB_defined_EMULTIHOP \
- || GNULIB_defined_EBADMSG \
- || GNULIB_defined_EOVERFLOW \
- || GNULIB_defined_ENOTSUP \
- || GNULIB_defined_ENETRESET \
- || GNULIB_defined_ECONNABORTED \
- || GNULIB_defined_ESTALE \
- || GNULIB_defined_EDQUOT \
- || GNULIB_defined_ECANCELED
-extern const char *strerror_override (int errnum);
-# else
-# define strerror_override(ignored) NULL
-# endif
-
-#endif /* _GL_STRERROR_OVERRIDE_H */
+++ /dev/null
-/* strerror.c --- POSIX compatible system error routine
-
- Copyright (C) 2007-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-/* Specification. */
-#include <string.h>
-
-#include <errno.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "intprops.h"
-#include "strerror-override.h"
-#include "verify.h"
-
-/* Use the system functions, not the gnulib overrides in this file. */
-#undef sprintf
-
-char *
-strerror (int n)
-#undef strerror
-{
- static char buf[STACKBUF_LEN];
- size_t len;
-
- /* Cast away const, due to the historical signature of strerror;
- callers should not be modifying the string. */
- const char *msg = strerror_override (n);
- if (msg)
- return (char *) msg;
-
- msg = strerror (n);
-
- /* Our strerror_r implementation might use the system's strerror
- buffer, so all other clients of strerror have to see the error
- copied into a buffer that we manage. This is not thread-safe,
- even if the system strerror is, but portable programs shouldn't
- be using strerror if they care about thread-safety. */
- if (!msg || !*msg)
- {
- static char const fmt[] = "Unknown error %d";
- verify (sizeof buf >= sizeof (fmt) + INT_STRLEN_BOUND (n));
- sprintf (buf, fmt, n);
- errno = EINVAL;
- return buf;
- }
-
- /* Fix STACKBUF_LEN if this ever aborts. */
- len = strlen (msg);
- if (sizeof buf <= len)
- abort ();
-
- return memcpy (buf, msg, len + 1);
-}
+++ /dev/null
-/* A GNU-like <string.h>.
-
- Copyright (C) 1995-1996, 2001-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef _@GUARD_PREFIX@_STRING_H
-
-#if __GNUC__ >= 3
-@PRAGMA_SYSTEM_HEADER@
-#endif
-@PRAGMA_COLUMNS@
-
-/* The include_next requires a split double-inclusion guard. */
-#@INCLUDE_NEXT@ @NEXT_STRING_H@
-
-#ifndef _@GUARD_PREFIX@_STRING_H
-#define _@GUARD_PREFIX@_STRING_H
-
-/* NetBSD 5.0 mis-defines NULL. */
-#include <stddef.h>
-
-/* MirBSD defines mbslen as a macro. */
-#if @GNULIB_MBSLEN@ && defined __MirBSD__
-# include <wchar.h>
-#endif
-
-/* The __attribute__ feature is available in gcc versions 2.5 and later.
- The attribute __pure__ was added in gcc 2.96. */
-#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96)
-# define _GL_ATTRIBUTE_PURE __attribute__ ((__pure__))
-#else
-# define _GL_ATTRIBUTE_PURE /* empty */
-#endif
-
-/* NetBSD 5.0 declares strsignal in <unistd.h>, not in <string.h>. */
-/* But in any case avoid namespace pollution on glibc systems. */
-#if (@GNULIB_STRSIGNAL@ || defined GNULIB_POSIXCHECK) && defined __NetBSD__ \
- && ! defined __GLIBC__
-# include <unistd.h>
-#endif
-
-/* The definitions of _GL_FUNCDECL_RPL etc. are copied here. */
-
-/* The definition of _GL_ARG_NONNULL is copied here. */
-
-/* The definition of _GL_WARN_ON_USE is copied here. */
-
-
-/* Find the index of the least-significant set bit. */
-#if @GNULIB_FFSL@
-# if !@HAVE_FFSL@
-_GL_FUNCDECL_SYS (ffsl, int, (long int i));
-# endif
-_GL_CXXALIAS_SYS (ffsl, int, (long int i));
-_GL_CXXALIASWARN (ffsl);
-#elif defined GNULIB_POSIXCHECK
-# undef ffsl
-# if HAVE_RAW_DECL_FFSL
-_GL_WARN_ON_USE (ffsl, "ffsl is not portable - use the ffsl module");
-# endif
-#endif
-
-
-/* Find the index of the least-significant set bit. */
-#if @GNULIB_FFSLL@
-# if !@HAVE_FFSLL@
-_GL_FUNCDECL_SYS (ffsll, int, (long long int i));
-# endif
-_GL_CXXALIAS_SYS (ffsll, int, (long long int i));
-_GL_CXXALIASWARN (ffsll);
-#elif defined GNULIB_POSIXCHECK
-# undef ffsll
-# if HAVE_RAW_DECL_FFSLL
-_GL_WARN_ON_USE (ffsll, "ffsll is not portable - use the ffsll module");
-# endif
-#endif
-
-
-/* Return the first instance of C within N bytes of S, or NULL. */
-#if @GNULIB_MEMCHR@
-# if @REPLACE_MEMCHR@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define memchr rpl_memchr
-# endif
-_GL_FUNCDECL_RPL (memchr, void *, (void const *__s, int __c, size_t __n)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (memchr, void *, (void const *__s, int __c, size_t __n));
-# else
-# if ! @HAVE_MEMCHR@
-_GL_FUNCDECL_SYS (memchr, void *, (void const *__s, int __c, size_t __n)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C" { const void * std::memchr (const void *, int, size_t); }
- extern "C++" { void * std::memchr (void *, int, size_t); } */
-_GL_CXXALIAS_SYS_CAST2 (memchr,
- void *, (void const *__s, int __c, size_t __n),
- void const *, (void const *__s, int __c, size_t __n));
-# endif
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (memchr, void *, (void *__s, int __c, size_t __n));
-_GL_CXXALIASWARN1 (memchr, void const *,
- (void const *__s, int __c, size_t __n));
-# else
-_GL_CXXALIASWARN (memchr);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef memchr
-/* Assume memchr is always declared. */
-_GL_WARN_ON_USE (memchr, "memchr has platform-specific bugs - "
- "use gnulib module memchr for portability" );
-#endif
-
-/* Return the first occurrence of NEEDLE in HAYSTACK. */
-#if @GNULIB_MEMMEM@
-# if @REPLACE_MEMMEM@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define memmem rpl_memmem
-# endif
-_GL_FUNCDECL_RPL (memmem, void *,
- (void const *__haystack, size_t __haystack_len,
- void const *__needle, size_t __needle_len)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 3)));
-_GL_CXXALIAS_RPL (memmem, void *,
- (void const *__haystack, size_t __haystack_len,
- void const *__needle, size_t __needle_len));
-# else
-# if ! @HAVE_DECL_MEMMEM@
-_GL_FUNCDECL_SYS (memmem, void *,
- (void const *__haystack, size_t __haystack_len,
- void const *__needle, size_t __needle_len)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 3)));
-# endif
-_GL_CXXALIAS_SYS (memmem, void *,
- (void const *__haystack, size_t __haystack_len,
- void const *__needle, size_t __needle_len));
-# endif
-_GL_CXXALIASWARN (memmem);
-#elif defined GNULIB_POSIXCHECK
-# undef memmem
-# if HAVE_RAW_DECL_MEMMEM
-_GL_WARN_ON_USE (memmem, "memmem is unportable and often quadratic - "
- "use gnulib module memmem-simple for portability, "
- "and module memmem for speed" );
-# endif
-#endif
-
-/* Copy N bytes of SRC to DEST, return pointer to bytes after the
- last written byte. */
-#if @GNULIB_MEMPCPY@
-# if ! @HAVE_MEMPCPY@
-_GL_FUNCDECL_SYS (mempcpy, void *,
- (void *restrict __dest, void const *restrict __src,
- size_t __n)
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (mempcpy, void *,
- (void *restrict __dest, void const *restrict __src,
- size_t __n));
-_GL_CXXALIASWARN (mempcpy);
-#elif defined GNULIB_POSIXCHECK
-# undef mempcpy
-# if HAVE_RAW_DECL_MEMPCPY
-_GL_WARN_ON_USE (mempcpy, "mempcpy is unportable - "
- "use gnulib module mempcpy for portability");
-# endif
-#endif
-
-/* Search backwards through a block for a byte (specified as an int). */
-#if @GNULIB_MEMRCHR@
-# if ! @HAVE_DECL_MEMRCHR@
-_GL_FUNCDECL_SYS (memrchr, void *, (void const *, int, size_t)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" { const void * std::memrchr (const void *, int, size_t); }
- extern "C++" { void * std::memrchr (void *, int, size_t); } */
-_GL_CXXALIAS_SYS_CAST2 (memrchr,
- void *, (void const *, int, size_t),
- void const *, (void const *, int, size_t));
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (memrchr, void *, (void *, int, size_t));
-_GL_CXXALIASWARN1 (memrchr, void const *, (void const *, int, size_t));
-# else
-_GL_CXXALIASWARN (memrchr);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef memrchr
-# if HAVE_RAW_DECL_MEMRCHR
-_GL_WARN_ON_USE (memrchr, "memrchr is unportable - "
- "use gnulib module memrchr for portability");
-# endif
-#endif
-
-/* Find the first occurrence of C in S. More efficient than
- memchr(S,C,N), at the expense of undefined behavior if C does not
- occur within N bytes. */
-#if @GNULIB_RAWMEMCHR@
-# if ! @HAVE_RAWMEMCHR@
-_GL_FUNCDECL_SYS (rawmemchr, void *, (void const *__s, int __c_in)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" { const void * std::rawmemchr (const void *, int); }
- extern "C++" { void * std::rawmemchr (void *, int); } */
-_GL_CXXALIAS_SYS_CAST2 (rawmemchr,
- void *, (void const *__s, int __c_in),
- void const *, (void const *__s, int __c_in));
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (rawmemchr, void *, (void *__s, int __c_in));
-_GL_CXXALIASWARN1 (rawmemchr, void const *, (void const *__s, int __c_in));
-# else
-_GL_CXXALIASWARN (rawmemchr);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef rawmemchr
-# if HAVE_RAW_DECL_RAWMEMCHR
-_GL_WARN_ON_USE (rawmemchr, "rawmemchr is unportable - "
- "use gnulib module rawmemchr for portability");
-# endif
-#endif
-
-/* Copy SRC to DST, returning the address of the terminating '\0' in DST. */
-#if @GNULIB_STPCPY@
-# if ! @HAVE_STPCPY@
-_GL_FUNCDECL_SYS (stpcpy, char *,
- (char *restrict __dst, char const *restrict __src)
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (stpcpy, char *,
- (char *restrict __dst, char const *restrict __src));
-_GL_CXXALIASWARN (stpcpy);
-#elif defined GNULIB_POSIXCHECK
-# undef stpcpy
-# if HAVE_RAW_DECL_STPCPY
-_GL_WARN_ON_USE (stpcpy, "stpcpy is unportable - "
- "use gnulib module stpcpy for portability");
-# endif
-#endif
-
-/* Copy no more than N bytes of SRC to DST, returning a pointer past the
- last non-NUL byte written into DST. */
-#if @GNULIB_STPNCPY@
-# if @REPLACE_STPNCPY@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef stpncpy
-# define stpncpy rpl_stpncpy
-# endif
-_GL_FUNCDECL_RPL (stpncpy, char *,
- (char *restrict __dst, char const *restrict __src,
- size_t __n)
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (stpncpy, char *,
- (char *restrict __dst, char const *restrict __src,
- size_t __n));
-# else
-# if ! @HAVE_STPNCPY@
-_GL_FUNCDECL_SYS (stpncpy, char *,
- (char *restrict __dst, char const *restrict __src,
- size_t __n)
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (stpncpy, char *,
- (char *restrict __dst, char const *restrict __src,
- size_t __n));
-# endif
-_GL_CXXALIASWARN (stpncpy);
-#elif defined GNULIB_POSIXCHECK
-# undef stpncpy
-# if HAVE_RAW_DECL_STPNCPY
-_GL_WARN_ON_USE (stpncpy, "stpncpy is unportable - "
- "use gnulib module stpncpy for portability");
-# endif
-#endif
-
-#if defined GNULIB_POSIXCHECK
-/* strchr() does not work with multibyte strings if the locale encoding is
- GB18030 and the character to be searched is a digit. */
-# undef strchr
-/* Assume strchr is always declared. */
-_GL_WARN_ON_USE (strchr, "strchr cannot work correctly on character strings "
- "in some multibyte locales - "
- "use mbschr if you care about internationalization");
-#endif
-
-/* Find the first occurrence of C in S or the final NUL byte. */
-#if @GNULIB_STRCHRNUL@
-# if @REPLACE_STRCHRNUL@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define strchrnul rpl_strchrnul
-# endif
-_GL_FUNCDECL_RPL (strchrnul, char *, (const char *__s, int __c_in)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (strchrnul, char *,
- (const char *str, int ch));
-# else
-# if ! @HAVE_STRCHRNUL@
-_GL_FUNCDECL_SYS (strchrnul, char *, (char const *__s, int __c_in)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" { const char * std::strchrnul (const char *, int); }
- extern "C++" { char * std::strchrnul (char *, int); } */
-_GL_CXXALIAS_SYS_CAST2 (strchrnul,
- char *, (char const *__s, int __c_in),
- char const *, (char const *__s, int __c_in));
-# endif
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (strchrnul, char *, (char *__s, int __c_in));
-_GL_CXXALIASWARN1 (strchrnul, char const *, (char const *__s, int __c_in));
-# else
-_GL_CXXALIASWARN (strchrnul);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef strchrnul
-# if HAVE_RAW_DECL_STRCHRNUL
-_GL_WARN_ON_USE (strchrnul, "strchrnul is unportable - "
- "use gnulib module strchrnul for portability");
-# endif
-#endif
-
-/* Duplicate S, returning an identical malloc'd string. */
-#if @GNULIB_STRDUP@
-# if @REPLACE_STRDUP@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef strdup
-# define strdup rpl_strdup
-# endif
-_GL_FUNCDECL_RPL (strdup, char *, (char const *__s) _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (strdup, char *, (char const *__s));
-# else
-# if defined __cplusplus && defined GNULIB_NAMESPACE && defined strdup
- /* strdup exists as a function and as a macro. Get rid of the macro. */
-# undef strdup
-# endif
-# if !(@HAVE_DECL_STRDUP@ || defined strdup)
-_GL_FUNCDECL_SYS (strdup, char *, (char const *__s) _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (strdup, char *, (char const *__s));
-# endif
-_GL_CXXALIASWARN (strdup);
-#elif defined GNULIB_POSIXCHECK
-# undef strdup
-# if HAVE_RAW_DECL_STRDUP
-_GL_WARN_ON_USE (strdup, "strdup is unportable - "
- "use gnulib module strdup for portability");
-# endif
-#endif
-
-/* Append no more than N characters from SRC onto DEST. */
-#if @GNULIB_STRNCAT@
-# if @REPLACE_STRNCAT@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef strncat
-# define strncat rpl_strncat
-# endif
-_GL_FUNCDECL_RPL (strncat, char *, (char *dest, const char *src, size_t n)
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (strncat, char *, (char *dest, const char *src, size_t n));
-# else
-_GL_CXXALIAS_SYS (strncat, char *, (char *dest, const char *src, size_t n));
-# endif
-_GL_CXXALIASWARN (strncat);
-#elif defined GNULIB_POSIXCHECK
-# undef strncat
-# if HAVE_RAW_DECL_STRNCAT
-_GL_WARN_ON_USE (strncat, "strncat is unportable - "
- "use gnulib module strncat for portability");
-# endif
-#endif
-
-/* Return a newly allocated copy of at most N bytes of STRING. */
-#if @GNULIB_STRNDUP@
-# if @REPLACE_STRNDUP@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef strndup
-# define strndup rpl_strndup
-# endif
-_GL_FUNCDECL_RPL (strndup, char *, (char const *__string, size_t __n)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (strndup, char *, (char const *__string, size_t __n));
-# else
-# if ! @HAVE_DECL_STRNDUP@
-_GL_FUNCDECL_SYS (strndup, char *, (char const *__string, size_t __n)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (strndup, char *, (char const *__string, size_t __n));
-# endif
-_GL_CXXALIASWARN (strndup);
-#elif defined GNULIB_POSIXCHECK
-# undef strndup
-# if HAVE_RAW_DECL_STRNDUP
-_GL_WARN_ON_USE (strndup, "strndup is unportable - "
- "use gnulib module strndup for portability");
-# endif
-#endif
-
-/* Find the length (number of bytes) of STRING, but scan at most
- MAXLEN bytes. If no '\0' terminator is found in that many bytes,
- return MAXLEN. */
-#if @GNULIB_STRNLEN@
-# if @REPLACE_STRNLEN@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef strnlen
-# define strnlen rpl_strnlen
-# endif
-_GL_FUNCDECL_RPL (strnlen, size_t, (char const *__string, size_t __maxlen)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (strnlen, size_t, (char const *__string, size_t __maxlen));
-# else
-# if ! @HAVE_DECL_STRNLEN@
-_GL_FUNCDECL_SYS (strnlen, size_t, (char const *__string, size_t __maxlen)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (strnlen, size_t, (char const *__string, size_t __maxlen));
-# endif
-_GL_CXXALIASWARN (strnlen);
-#elif defined GNULIB_POSIXCHECK
-# undef strnlen
-# if HAVE_RAW_DECL_STRNLEN
-_GL_WARN_ON_USE (strnlen, "strnlen is unportable - "
- "use gnulib module strnlen for portability");
-# endif
-#endif
-
-#if defined GNULIB_POSIXCHECK
-/* strcspn() assumes the second argument is a list of single-byte characters.
- Even in this simple case, it does not work with multibyte strings if the
- locale encoding is GB18030 and one of the characters to be searched is a
- digit. */
-# undef strcspn
-/* Assume strcspn is always declared. */
-_GL_WARN_ON_USE (strcspn, "strcspn cannot work correctly on character strings "
- "in multibyte locales - "
- "use mbscspn if you care about internationalization");
-#endif
-
-/* Find the first occurrence in S of any character in ACCEPT. */
-#if @GNULIB_STRPBRK@
-# if ! @HAVE_STRPBRK@
-_GL_FUNCDECL_SYS (strpbrk, char *, (char const *__s, char const *__accept)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2)));
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C" { const char * strpbrk (const char *, const char *); }
- extern "C++" { char * strpbrk (char *, const char *); } */
-_GL_CXXALIAS_SYS_CAST2 (strpbrk,
- char *, (char const *__s, char const *__accept),
- const char *, (char const *__s, char const *__accept));
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (strpbrk, char *, (char *__s, char const *__accept));
-_GL_CXXALIASWARN1 (strpbrk, char const *,
- (char const *__s, char const *__accept));
-# else
-_GL_CXXALIASWARN (strpbrk);
-# endif
-# if defined GNULIB_POSIXCHECK
-/* strpbrk() assumes the second argument is a list of single-byte characters.
- Even in this simple case, it does not work with multibyte strings if the
- locale encoding is GB18030 and one of the characters to be searched is a
- digit. */
-# undef strpbrk
-_GL_WARN_ON_USE (strpbrk, "strpbrk cannot work correctly on character strings "
- "in multibyte locales - "
- "use mbspbrk if you care about internationalization");
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef strpbrk
-# if HAVE_RAW_DECL_STRPBRK
-_GL_WARN_ON_USE (strpbrk, "strpbrk is unportable - "
- "use gnulib module strpbrk for portability");
-# endif
-#endif
-
-#if defined GNULIB_POSIXCHECK
-/* strspn() assumes the second argument is a list of single-byte characters.
- Even in this simple case, it cannot work with multibyte strings. */
-# undef strspn
-/* Assume strspn is always declared. */
-_GL_WARN_ON_USE (strspn, "strspn cannot work correctly on character strings "
- "in multibyte locales - "
- "use mbsspn if you care about internationalization");
-#endif
-
-#if defined GNULIB_POSIXCHECK
-/* strrchr() does not work with multibyte strings if the locale encoding is
- GB18030 and the character to be searched is a digit. */
-# undef strrchr
-/* Assume strrchr is always declared. */
-_GL_WARN_ON_USE (strrchr, "strrchr cannot work correctly on character strings "
- "in some multibyte locales - "
- "use mbsrchr if you care about internationalization");
-#endif
-
-/* Search the next delimiter (char listed in DELIM) starting at *STRINGP.
- If one is found, overwrite it with a NUL, and advance *STRINGP
- to point to the next char after it. Otherwise, set *STRINGP to NULL.
- If *STRINGP was already NULL, nothing happens.
- Return the old value of *STRINGP.
-
- This is a variant of strtok() that is multithread-safe and supports
- empty fields.
-
- Caveat: It modifies the original string.
- Caveat: These functions cannot be used on constant strings.
- Caveat: The identity of the delimiting character is lost.
- Caveat: It doesn't work with multibyte strings unless all of the delimiter
- characters are ASCII characters < 0x30.
-
- See also strtok_r(). */
-#if @GNULIB_STRSEP@
-# if ! @HAVE_STRSEP@
-_GL_FUNCDECL_SYS (strsep, char *,
- (char **restrict __stringp, char const *restrict __delim)
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (strsep, char *,
- (char **restrict __stringp, char const *restrict __delim));
-_GL_CXXALIASWARN (strsep);
-# if defined GNULIB_POSIXCHECK
-# undef strsep
-_GL_WARN_ON_USE (strsep, "strsep cannot work correctly on character strings "
- "in multibyte locales - "
- "use mbssep if you care about internationalization");
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef strsep
-# if HAVE_RAW_DECL_STRSEP
-_GL_WARN_ON_USE (strsep, "strsep is unportable - "
- "use gnulib module strsep for portability");
-# endif
-#endif
-
-#if @GNULIB_STRSTR@
-# if @REPLACE_STRSTR@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define strstr rpl_strstr
-# endif
-_GL_FUNCDECL_RPL (strstr, char *, (const char *haystack, const char *needle)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (strstr, char *, (const char *haystack, const char *needle));
-# else
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" { const char * strstr (const char *, const char *); }
- extern "C++" { char * strstr (char *, const char *); } */
-_GL_CXXALIAS_SYS_CAST2 (strstr,
- char *, (const char *haystack, const char *needle),
- const char *, (const char *haystack, const char *needle));
-# endif
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (strstr, char *, (char *haystack, const char *needle));
-_GL_CXXALIASWARN1 (strstr, const char *,
- (const char *haystack, const char *needle));
-# else
-_GL_CXXALIASWARN (strstr);
-# endif
-#elif defined GNULIB_POSIXCHECK
-/* strstr() does not work with multibyte strings if the locale encoding is
- different from UTF-8:
- POSIX says that it operates on "strings", and "string" in POSIX is defined
- as a sequence of bytes, not of characters. */
-# undef strstr
-/* Assume strstr is always declared. */
-_GL_WARN_ON_USE (strstr, "strstr is quadratic on many systems, and cannot "
- "work correctly on character strings in most "
- "multibyte locales - "
- "use mbsstr if you care about internationalization, "
- "or use strstr if you care about speed");
-#endif
-
-/* Find the first occurrence of NEEDLE in HAYSTACK, using case-insensitive
- comparison. */
-#if @GNULIB_STRCASESTR@
-# if @REPLACE_STRCASESTR@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define strcasestr rpl_strcasestr
-# endif
-_GL_FUNCDECL_RPL (strcasestr, char *,
- (const char *haystack, const char *needle)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (strcasestr, char *,
- (const char *haystack, const char *needle));
-# else
-# if ! @HAVE_STRCASESTR@
-_GL_FUNCDECL_SYS (strcasestr, char *,
- (const char *haystack, const char *needle)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2)));
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" { const char * strcasestr (const char *, const char *); }
- extern "C++" { char * strcasestr (char *, const char *); } */
-_GL_CXXALIAS_SYS_CAST2 (strcasestr,
- char *, (const char *haystack, const char *needle),
- const char *, (const char *haystack, const char *needle));
-# endif
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (strcasestr, char *, (char *haystack, const char *needle));
-_GL_CXXALIASWARN1 (strcasestr, const char *,
- (const char *haystack, const char *needle));
-# else
-_GL_CXXALIASWARN (strcasestr);
-# endif
-#elif defined GNULIB_POSIXCHECK
-/* strcasestr() does not work with multibyte strings:
- It is a glibc extension, and glibc implements it only for unibyte
- locales. */
-# undef strcasestr
-# if HAVE_RAW_DECL_STRCASESTR
-_GL_WARN_ON_USE (strcasestr, "strcasestr does work correctly on character "
- "strings in multibyte locales - "
- "use mbscasestr if you care about "
- "internationalization, or use c-strcasestr if you want "
- "a locale independent function");
-# endif
-#endif
-
-/* Parse S into tokens separated by characters in DELIM.
- If S is NULL, the saved pointer in SAVE_PTR is used as
- the next starting point. For example:
- char s[] = "-abc-=-def";
- char *sp;
- x = strtok_r(s, "-", &sp); // x = "abc", sp = "=-def"
- x = strtok_r(NULL, "-=", &sp); // x = "def", sp = NULL
- x = strtok_r(NULL, "=", &sp); // x = NULL
- // s = "abc\0-def\0"
-
- This is a variant of strtok() that is multithread-safe.
-
- For the POSIX documentation for this function, see:
- http://www.opengroup.org/susv3xsh/strtok.html
-
- Caveat: It modifies the original string.
- Caveat: These functions cannot be used on constant strings.
- Caveat: The identity of the delimiting character is lost.
- Caveat: It doesn't work with multibyte strings unless all of the delimiter
- characters are ASCII characters < 0x30.
-
- See also strsep(). */
-#if @GNULIB_STRTOK_R@
-# if @REPLACE_STRTOK_R@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef strtok_r
-# define strtok_r rpl_strtok_r
-# endif
-_GL_FUNCDECL_RPL (strtok_r, char *,
- (char *restrict s, char const *restrict delim,
- char **restrict save_ptr)
- _GL_ARG_NONNULL ((2, 3)));
-_GL_CXXALIAS_RPL (strtok_r, char *,
- (char *restrict s, char const *restrict delim,
- char **restrict save_ptr));
-# else
-# if @UNDEFINE_STRTOK_R@ || defined GNULIB_POSIXCHECK
-# undef strtok_r
-# endif
-# if ! @HAVE_DECL_STRTOK_R@
-_GL_FUNCDECL_SYS (strtok_r, char *,
- (char *restrict s, char const *restrict delim,
- char **restrict save_ptr)
- _GL_ARG_NONNULL ((2, 3)));
-# endif
-_GL_CXXALIAS_SYS (strtok_r, char *,
- (char *restrict s, char const *restrict delim,
- char **restrict save_ptr));
-# endif
-_GL_CXXALIASWARN (strtok_r);
-# if defined GNULIB_POSIXCHECK
-_GL_WARN_ON_USE (strtok_r, "strtok_r cannot work correctly on character "
- "strings in multibyte locales - "
- "use mbstok_r if you care about internationalization");
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef strtok_r
-# if HAVE_RAW_DECL_STRTOK_R
-_GL_WARN_ON_USE (strtok_r, "strtok_r is unportable - "
- "use gnulib module strtok_r for portability");
-# endif
-#endif
-
-
-/* The following functions are not specified by POSIX. They are gnulib
- extensions. */
-
-#if @GNULIB_MBSLEN@
-/* Return the number of multibyte characters in the character string STRING.
- This considers multibyte characters, unlike strlen, which counts bytes. */
-# ifdef __MirBSD__ /* MirBSD defines mbslen as a macro. Override it. */
-# undef mbslen
-# endif
-# if @HAVE_MBSLEN@ /* AIX, OSF/1, MirBSD define mbslen already in libc. */
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define mbslen rpl_mbslen
-# endif
-_GL_FUNCDECL_RPL (mbslen, size_t, (const char *string)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (mbslen, size_t, (const char *string));
-# else
-_GL_FUNCDECL_SYS (mbslen, size_t, (const char *string)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_SYS (mbslen, size_t, (const char *string));
-# endif
-_GL_CXXALIASWARN (mbslen);
-#endif
-
-#if @GNULIB_MBSNLEN@
-/* Return the number of multibyte characters in the character string starting
- at STRING and ending at STRING + LEN. */
-_GL_EXTERN_C size_t mbsnlen (const char *string, size_t len)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1));
-#endif
-
-#if @GNULIB_MBSCHR@
-/* Locate the first single-byte character C in the character string STRING,
- and return a pointer to it. Return NULL if C is not found in STRING.
- Unlike strchr(), this function works correctly in multibyte locales with
- encodings such as GB18030. */
-# if defined __hpux
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define mbschr rpl_mbschr /* avoid collision with HP-UX function */
-# endif
-_GL_FUNCDECL_RPL (mbschr, char *, (const char *string, int c)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (mbschr, char *, (const char *string, int c));
-# else
-_GL_FUNCDECL_SYS (mbschr, char *, (const char *string, int c)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_SYS (mbschr, char *, (const char *string, int c));
-# endif
-_GL_CXXALIASWARN (mbschr);
-#endif
-
-#if @GNULIB_MBSRCHR@
-/* Locate the last single-byte character C in the character string STRING,
- and return a pointer to it. Return NULL if C is not found in STRING.
- Unlike strrchr(), this function works correctly in multibyte locales with
- encodings such as GB18030. */
-# if defined __hpux || defined __INTERIX
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define mbsrchr rpl_mbsrchr /* avoid collision with system function */
-# endif
-_GL_FUNCDECL_RPL (mbsrchr, char *, (const char *string, int c)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (mbsrchr, char *, (const char *string, int c));
-# else
-_GL_FUNCDECL_SYS (mbsrchr, char *, (const char *string, int c)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_SYS (mbsrchr, char *, (const char *string, int c));
-# endif
-_GL_CXXALIASWARN (mbsrchr);
-#endif
-
-#if @GNULIB_MBSSTR@
-/* Find the first occurrence of the character string NEEDLE in the character
- string HAYSTACK. Return NULL if NEEDLE is not found in HAYSTACK.
- Unlike strstr(), this function works correctly in multibyte locales with
- encodings different from UTF-8. */
-_GL_EXTERN_C char * mbsstr (const char *haystack, const char *needle)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2));
-#endif
-
-#if @GNULIB_MBSCASECMP@
-/* Compare the character strings S1 and S2, ignoring case, returning less than,
- equal to or greater than zero if S1 is lexicographically less than, equal to
- or greater than S2.
- Note: This function may, in multibyte locales, return 0 for strings of
- different lengths!
- Unlike strcasecmp(), this function works correctly in multibyte locales. */
-_GL_EXTERN_C int mbscasecmp (const char *s1, const char *s2)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2));
-#endif
-
-#if @GNULIB_MBSNCASECMP@
-/* Compare the initial segment of the character string S1 consisting of at most
- N characters with the initial segment of the character string S2 consisting
- of at most N characters, ignoring case, returning less than, equal to or
- greater than zero if the initial segment of S1 is lexicographically less
- than, equal to or greater than the initial segment of S2.
- Note: This function may, in multibyte locales, return 0 for initial segments
- of different lengths!
- Unlike strncasecmp(), this function works correctly in multibyte locales.
- But beware that N is not a byte count but a character count! */
-_GL_EXTERN_C int mbsncasecmp (const char *s1, const char *s2, size_t n)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2));
-#endif
-
-#if @GNULIB_MBSPCASECMP@
-/* Compare the initial segment of the character string STRING consisting of
- at most mbslen (PREFIX) characters with the character string PREFIX,
- ignoring case. If the two match, return a pointer to the first byte
- after this prefix in STRING. Otherwise, return NULL.
- Note: This function may, in multibyte locales, return non-NULL if STRING
- is of smaller length than PREFIX!
- Unlike strncasecmp(), this function works correctly in multibyte
- locales. */
-_GL_EXTERN_C char * mbspcasecmp (const char *string, const char *prefix)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2));
-#endif
-
-#if @GNULIB_MBSCASESTR@
-/* Find the first occurrence of the character string NEEDLE in the character
- string HAYSTACK, using case-insensitive comparison.
- Note: This function may, in multibyte locales, return success even if
- strlen (haystack) < strlen (needle) !
- Unlike strcasestr(), this function works correctly in multibyte locales. */
-_GL_EXTERN_C char * mbscasestr (const char *haystack, const char *needle)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2));
-#endif
-
-#if @GNULIB_MBSCSPN@
-/* Find the first occurrence in the character string STRING of any character
- in the character string ACCEPT. Return the number of bytes from the
- beginning of the string to this occurrence, or to the end of the string
- if none exists.
- Unlike strcspn(), this function works correctly in multibyte locales. */
-_GL_EXTERN_C size_t mbscspn (const char *string, const char *accept)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2));
-#endif
-
-#if @GNULIB_MBSPBRK@
-/* Find the first occurrence in the character string STRING of any character
- in the character string ACCEPT. Return the pointer to it, or NULL if none
- exists.
- Unlike strpbrk(), this function works correctly in multibyte locales. */
-# if defined __hpux
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define mbspbrk rpl_mbspbrk /* avoid collision with HP-UX function */
-# endif
-_GL_FUNCDECL_RPL (mbspbrk, char *, (const char *string, const char *accept)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (mbspbrk, char *, (const char *string, const char *accept));
-# else
-_GL_FUNCDECL_SYS (mbspbrk, char *, (const char *string, const char *accept)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_SYS (mbspbrk, char *, (const char *string, const char *accept));
-# endif
-_GL_CXXALIASWARN (mbspbrk);
-#endif
-
-#if @GNULIB_MBSSPN@
-/* Find the first occurrence in the character string STRING of any character
- not in the character string REJECT. Return the number of bytes from the
- beginning of the string to this occurrence, or to the end of the string
- if none exists.
- Unlike strspn(), this function works correctly in multibyte locales. */
-_GL_EXTERN_C size_t mbsspn (const char *string, const char *reject)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2));
-#endif
-
-#if @GNULIB_MBSSEP@
-/* Search the next delimiter (multibyte character listed in the character
- string DELIM) starting at the character string *STRINGP.
- If one is found, overwrite it with a NUL, and advance *STRINGP to point
- to the next multibyte character after it. Otherwise, set *STRINGP to NULL.
- If *STRINGP was already NULL, nothing happens.
- Return the old value of *STRINGP.
-
- This is a variant of mbstok_r() that supports empty fields.
-
- Caveat: It modifies the original string.
- Caveat: These functions cannot be used on constant strings.
- Caveat: The identity of the delimiting character is lost.
-
- See also mbstok_r(). */
-_GL_EXTERN_C char * mbssep (char **stringp, const char *delim)
- _GL_ARG_NONNULL ((1, 2));
-#endif
-
-#if @GNULIB_MBSTOK_R@
-/* Parse the character string STRING into tokens separated by characters in
- the character string DELIM.
- If STRING is NULL, the saved pointer in SAVE_PTR is used as
- the next starting point. For example:
- char s[] = "-abc-=-def";
- char *sp;
- x = mbstok_r(s, "-", &sp); // x = "abc", sp = "=-def"
- x = mbstok_r(NULL, "-=", &sp); // x = "def", sp = NULL
- x = mbstok_r(NULL, "=", &sp); // x = NULL
- // s = "abc\0-def\0"
-
- Caveat: It modifies the original string.
- Caveat: These functions cannot be used on constant strings.
- Caveat: The identity of the delimiting character is lost.
-
- See also mbssep(). */
-_GL_EXTERN_C char * mbstok_r (char *string, const char *delim, char **save_ptr)
- _GL_ARG_NONNULL ((2, 3));
-#endif
-
-/* Map any int, typically from errno, into an error message. */
-#if @GNULIB_STRERROR@
-# if @REPLACE_STRERROR@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef strerror
-# define strerror rpl_strerror
-# endif
-_GL_FUNCDECL_RPL (strerror, char *, (int));
-_GL_CXXALIAS_RPL (strerror, char *, (int));
-# else
-_GL_CXXALIAS_SYS (strerror, char *, (int));
-# endif
-_GL_CXXALIASWARN (strerror);
-#elif defined GNULIB_POSIXCHECK
-# undef strerror
-/* Assume strerror is always declared. */
-_GL_WARN_ON_USE (strerror, "strerror is unportable - "
- "use gnulib module strerror to guarantee non-NULL result");
-#endif
-
-/* Map any int, typically from errno, into an error message. Multithread-safe.
- Uses the POSIX declaration, not the glibc declaration. */
-#if @GNULIB_STRERROR_R@
-# if @REPLACE_STRERROR_R@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef strerror_r
-# define strerror_r rpl_strerror_r
-# endif
-_GL_FUNCDECL_RPL (strerror_r, int, (int errnum, char *buf, size_t buflen)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (strerror_r, int, (int errnum, char *buf, size_t buflen));
-# else
-# if !@HAVE_DECL_STRERROR_R@
-_GL_FUNCDECL_SYS (strerror_r, int, (int errnum, char *buf, size_t buflen)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (strerror_r, int, (int errnum, char *buf, size_t buflen));
-# endif
-# if @HAVE_DECL_STRERROR_R@
-_GL_CXXALIASWARN (strerror_r);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef strerror_r
-# if HAVE_RAW_DECL_STRERROR_R
-_GL_WARN_ON_USE (strerror_r, "strerror_r is unportable - "
- "use gnulib module strerror_r-posix for portability");
-# endif
-#endif
-
-#if @GNULIB_STRSIGNAL@
-# if @REPLACE_STRSIGNAL@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define strsignal rpl_strsignal
-# endif
-_GL_FUNCDECL_RPL (strsignal, char *, (int __sig));
-_GL_CXXALIAS_RPL (strsignal, char *, (int __sig));
-# else
-# if ! @HAVE_DECL_STRSIGNAL@
-_GL_FUNCDECL_SYS (strsignal, char *, (int __sig));
-# endif
-/* Need to cast, because on Cygwin 1.5.x systems, the return type is
- 'const char *'. */
-_GL_CXXALIAS_SYS_CAST (strsignal, char *, (int __sig));
-# endif
-_GL_CXXALIASWARN (strsignal);
-#elif defined GNULIB_POSIXCHECK
-# undef strsignal
-# if HAVE_RAW_DECL_STRSIGNAL
-_GL_WARN_ON_USE (strsignal, "strsignal is unportable - "
- "use gnulib module strsignal for portability");
-# endif
-#endif
-
-#if @GNULIB_STRVERSCMP@
-# if !@HAVE_STRVERSCMP@
-_GL_FUNCDECL_SYS (strverscmp, int, (const char *, const char *)
- _GL_ATTRIBUTE_PURE
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (strverscmp, int, (const char *, const char *));
-_GL_CXXALIASWARN (strverscmp);
-#elif defined GNULIB_POSIXCHECK
-# undef strverscmp
-# if HAVE_RAW_DECL_STRVERSCMP
-_GL_WARN_ON_USE (strverscmp, "strverscmp is unportable - "
- "use gnulib module strverscmp for portability");
-# endif
-#endif
-
-
-#endif /* _@GUARD_PREFIX@_STRING_H */
-#endif /* _@GUARD_PREFIX@_STRING_H */
+++ /dev/null
-/* Substitute for and wrapper around <unistd.h>.
- Copyright (C) 2003-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-#if __GNUC__ >= 3
-@PRAGMA_SYSTEM_HEADER@
-#endif
-@PRAGMA_COLUMNS@
-
-/* Special invocation convention:
- - On mingw, several headers, including <winsock2.h>, include <unistd.h>,
- but we need to ensure that both the system <unistd.h> and <winsock2.h>
- are completely included before we replace gethostname. */
-#if @GNULIB_GETHOSTNAME@ && @UNISTD_H_HAVE_WINSOCK2_H@ \
- && !defined _GL_WINSOCK2_H_WITNESS && defined _WINSOCK2_H
-/* <unistd.h> is being indirectly included for the first time from
- <winsock2.h>; avoid declaring any overrides. */
-# if @HAVE_UNISTD_H@
-# @INCLUDE_NEXT@ @NEXT_UNISTD_H@
-# else
-# error unexpected; report this to bug-gnulib@gnu.org
-# endif
-# define _GL_WINSOCK2_H_WITNESS
-
-/* Normal invocation. */
-#elif !defined _@GUARD_PREFIX@_UNISTD_H
-
-/* The include_next requires a split double-inclusion guard. */
-#if @HAVE_UNISTD_H@
-# @INCLUDE_NEXT@ @NEXT_UNISTD_H@
-#endif
-
-/* Get all possible declarations of gethostname(). */
-#if @GNULIB_GETHOSTNAME@ && @UNISTD_H_HAVE_WINSOCK2_H@ \
- && !defined _GL_INCLUDING_WINSOCK2_H
-# define _GL_INCLUDING_WINSOCK2_H
-# include <winsock2.h>
-# undef _GL_INCLUDING_WINSOCK2_H
-#endif
-
-#if !defined _@GUARD_PREFIX@_UNISTD_H && !defined _GL_INCLUDING_WINSOCK2_H
-#define _@GUARD_PREFIX@_UNISTD_H
-
-/* NetBSD 5.0 mis-defines NULL. Also get size_t. */
-#include <stddef.h>
-
-/* mingw doesn't define the SEEK_* or *_FILENO macros in <unistd.h>. */
-/* Cygwin 1.7.1 declares symlinkat in <stdio.h>, not in <unistd.h>. */
-/* But avoid namespace pollution on glibc systems. */
-#if (!(defined SEEK_CUR && defined SEEK_END && defined SEEK_SET) \
- || ((@GNULIB_SYMLINKAT@ || defined GNULIB_POSIXCHECK) \
- && defined __CYGWIN__)) \
- && ! defined __GLIBC__
-# include <stdio.h>
-#endif
-
-/* Cygwin 1.7.1 declares unlinkat in <fcntl.h>, not in <unistd.h>. */
-/* But avoid namespace pollution on glibc systems. */
-#if (@GNULIB_UNLINKAT@ || defined GNULIB_POSIXCHECK) && defined __CYGWIN__ \
- && ! defined __GLIBC__
-# include <fcntl.h>
-#endif
-
-/* mingw fails to declare _exit in <unistd.h>. */
-/* mingw, MSVC, BeOS, Haiku declare environ in <stdlib.h>, not in
- <unistd.h>. */
-/* Solaris declares getcwd not only in <unistd.h> but also in <stdlib.h>. */
-/* But avoid namespace pollution on glibc systems. */
-#ifndef __GLIBC__
-# include <stdlib.h>
-#endif
-
-/* Native Windows platforms declare chdir, getcwd, rmdir in
- <io.h> and/or <direct.h>, not in <unistd.h>.
- They also declare access(), chmod(), close(), dup(), dup2(), isatty(),
- lseek(), read(), unlink(), write() in <io.h>. */
-#if ((@GNULIB_CHDIR@ || @GNULIB_GETCWD@ || @GNULIB_RMDIR@ \
- || defined GNULIB_POSIXCHECK) \
- && ((defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__))
-# include <io.h> /* mingw32, mingw64 */
-# include <direct.h> /* mingw64, MSVC 9 */
-#elif (@GNULIB_CLOSE@ || @GNULIB_DUP@ || @GNULIB_DUP2@ || @GNULIB_ISATTY@ \
- || @GNULIB_LSEEK@ || @GNULIB_READ@ || @GNULIB_UNLINK@ || @GNULIB_WRITE@ \
- || defined GNULIB_POSIXCHECK) \
- && ((defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__)
-# include <io.h>
-#endif
-
-/* AIX and OSF/1 5.1 declare getdomainname in <netdb.h>, not in <unistd.h>.
- NonStop Kernel declares gethostname in <netdb.h>, not in <unistd.h>. */
-/* But avoid namespace pollution on glibc systems. */
-#if ((@GNULIB_GETDOMAINNAME@ && (defined _AIX || defined __osf__)) \
- || (@GNULIB_GETHOSTNAME@ && defined __TANDEM)) \
- && !defined __GLIBC__
-# include <netdb.h>
-#endif
-
-/* MSVC defines off_t in <sys/types.h>. */
-#if !@HAVE_UNISTD_H@
-/* Get off_t. */
-# include <sys/types.h>
-#endif
-
-#if (@GNULIB_READ@ || @GNULIB_WRITE@ \
- || @GNULIB_READLINK@ || @GNULIB_READLINKAT@ \
- || @GNULIB_PREAD@ || @GNULIB_PWRITE@ || defined GNULIB_POSIXCHECK)
-/* Get ssize_t. */
-# include <sys/types.h>
-#endif
-
-/* Get getopt(), optarg, optind, opterr, optopt.
- But avoid namespace pollution on glibc systems. */
-#if @GNULIB_UNISTD_H_GETOPT@ && !defined __GLIBC__ && !defined _GL_SYSTEM_GETOPT
-# include <getopt.h>
-#endif
-
-/* The definitions of _GL_FUNCDECL_RPL etc. are copied here. */
-
-/* The definition of _GL_ARG_NONNULL is copied here. */
-
-/* The definition of _GL_WARN_ON_USE is copied here. */
-
-
-/* Hide some function declarations from <winsock2.h>. */
-
-#if @GNULIB_GETHOSTNAME@ && @UNISTD_H_HAVE_WINSOCK2_H@
-# if !defined _@GUARD_PREFIX@_SYS_SOCKET_H
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef socket
-# define socket socket_used_without_including_sys_socket_h
-# undef connect
-# define connect connect_used_without_including_sys_socket_h
-# undef accept
-# define accept accept_used_without_including_sys_socket_h
-# undef bind
-# define bind bind_used_without_including_sys_socket_h
-# undef getpeername
-# define getpeername getpeername_used_without_including_sys_socket_h
-# undef getsockname
-# define getsockname getsockname_used_without_including_sys_socket_h
-# undef getsockopt
-# define getsockopt getsockopt_used_without_including_sys_socket_h
-# undef listen
-# define listen listen_used_without_including_sys_socket_h
-# undef recv
-# define recv recv_used_without_including_sys_socket_h
-# undef send
-# define send send_used_without_including_sys_socket_h
-# undef recvfrom
-# define recvfrom recvfrom_used_without_including_sys_socket_h
-# undef sendto
-# define sendto sendto_used_without_including_sys_socket_h
-# undef setsockopt
-# define setsockopt setsockopt_used_without_including_sys_socket_h
-# undef shutdown
-# define shutdown shutdown_used_without_including_sys_socket_h
-# else
- _GL_WARN_ON_USE (socket,
- "socket() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (connect,
- "connect() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (accept,
- "accept() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (bind,
- "bind() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (getpeername,
- "getpeername() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (getsockname,
- "getsockname() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (getsockopt,
- "getsockopt() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (listen,
- "listen() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (recv,
- "recv() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (send,
- "send() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (recvfrom,
- "recvfrom() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (sendto,
- "sendto() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (setsockopt,
- "setsockopt() used without including <sys/socket.h>");
- _GL_WARN_ON_USE (shutdown,
- "shutdown() used without including <sys/socket.h>");
-# endif
-# endif
-# if !defined _@GUARD_PREFIX@_SYS_SELECT_H
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef select
-# define select select_used_without_including_sys_select_h
-# else
- _GL_WARN_ON_USE (select,
- "select() used without including <sys/select.h>");
-# endif
-# endif
-#endif
-
-
-/* OS/2 EMX lacks these macros. */
-#ifndef STDIN_FILENO
-# define STDIN_FILENO 0
-#endif
-#ifndef STDOUT_FILENO
-# define STDOUT_FILENO 1
-#endif
-#ifndef STDERR_FILENO
-# define STDERR_FILENO 2
-#endif
-
-/* Ensure *_OK macros exist. */
-#ifndef F_OK
-# define F_OK 0
-# define X_OK 1
-# define W_OK 2
-# define R_OK 4
-#endif
-
-
-/* Declare overridden functions. */
-
-
-#if defined GNULIB_POSIXCHECK
-/* The access() function is a security risk. */
-_GL_WARN_ON_USE (access, "the access function is a security risk - "
- "use the gnulib module faccessat instead");
-#endif
-
-
-#if @GNULIB_CHDIR@
-_GL_CXXALIAS_SYS (chdir, int, (const char *file) _GL_ARG_NONNULL ((1)));
-_GL_CXXALIASWARN (chdir);
-#elif defined GNULIB_POSIXCHECK
-# undef chdir
-# if HAVE_RAW_DECL_CHDIR
-_GL_WARN_ON_USE (chown, "chdir is not always in <unistd.h> - "
- "use gnulib module chdir for portability");
-# endif
-#endif
-
-
-#if @GNULIB_CHOWN@
-/* Change the owner of FILE to UID (if UID is not -1) and the group of FILE
- to GID (if GID is not -1). Follow symbolic links.
- Return 0 if successful, otherwise -1 and errno set.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/chown.html. */
-# if @REPLACE_CHOWN@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef chown
-# define chown rpl_chown
-# endif
-_GL_FUNCDECL_RPL (chown, int, (const char *file, uid_t uid, gid_t gid)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (chown, int, (const char *file, uid_t uid, gid_t gid));
-# else
-# if !@HAVE_CHOWN@
-_GL_FUNCDECL_SYS (chown, int, (const char *file, uid_t uid, gid_t gid)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (chown, int, (const char *file, uid_t uid, gid_t gid));
-# endif
-_GL_CXXALIASWARN (chown);
-#elif defined GNULIB_POSIXCHECK
-# undef chown
-# if HAVE_RAW_DECL_CHOWN
-_GL_WARN_ON_USE (chown, "chown fails to follow symlinks on some systems and "
- "doesn't treat a uid or gid of -1 on some systems - "
- "use gnulib module chown for portability");
-# endif
-#endif
-
-
-#if @GNULIB_CLOSE@
-# if @REPLACE_CLOSE@
-/* Automatically included by modules that need a replacement for close. */
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef close
-# define close rpl_close
-# endif
-_GL_FUNCDECL_RPL (close, int, (int fd));
-_GL_CXXALIAS_RPL (close, int, (int fd));
-# else
-_GL_CXXALIAS_SYS (close, int, (int fd));
-# endif
-_GL_CXXALIASWARN (close);
-#elif @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
-# undef close
-# define close close_used_without_requesting_gnulib_module_close
-#elif defined GNULIB_POSIXCHECK
-# undef close
-/* Assume close is always declared. */
-_GL_WARN_ON_USE (close, "close does not portably work on sockets - "
- "use gnulib module close for portability");
-#endif
-
-
-#if @GNULIB_DUP@
-# if @REPLACE_DUP@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define dup rpl_dup
-# endif
-_GL_FUNCDECL_RPL (dup, int, (int oldfd));
-_GL_CXXALIAS_RPL (dup, int, (int oldfd));
-# else
-_GL_CXXALIAS_SYS (dup, int, (int oldfd));
-# endif
-_GL_CXXALIASWARN (dup);
-#elif defined GNULIB_POSIXCHECK
-# undef dup
-# if HAVE_RAW_DECL_DUP
-_GL_WARN_ON_USE (dup, "dup is unportable - "
- "use gnulib module dup for portability");
-# endif
-#endif
-
-
-#if @GNULIB_DUP2@
-/* Copy the file descriptor OLDFD into file descriptor NEWFD. Do nothing if
- NEWFD = OLDFD, otherwise close NEWFD first if it is open.
- Return newfd if successful, otherwise -1 and errno set.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/dup2.html>. */
-# if @REPLACE_DUP2@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define dup2 rpl_dup2
-# endif
-_GL_FUNCDECL_RPL (dup2, int, (int oldfd, int newfd));
-_GL_CXXALIAS_RPL (dup2, int, (int oldfd, int newfd));
-# else
-# if !@HAVE_DUP2@
-_GL_FUNCDECL_SYS (dup2, int, (int oldfd, int newfd));
-# endif
-_GL_CXXALIAS_SYS (dup2, int, (int oldfd, int newfd));
-# endif
-_GL_CXXALIASWARN (dup2);
-#elif defined GNULIB_POSIXCHECK
-# undef dup2
-# if HAVE_RAW_DECL_DUP2
-_GL_WARN_ON_USE (dup2, "dup2 is unportable - "
- "use gnulib module dup2 for portability");
-# endif
-#endif
-
-
-#if @GNULIB_DUP3@
-/* Copy the file descriptor OLDFD into file descriptor NEWFD, with the
- specified flags.
- The flags are a bitmask, possibly including O_CLOEXEC (defined in <fcntl.h>)
- and O_TEXT, O_BINARY (defined in "binary-io.h").
- Close NEWFD first if it is open.
- Return newfd if successful, otherwise -1 and errno set.
- See the Linux man page at
- <http://www.kernel.org/doc/man-pages/online/pages/man2/dup3.2.html>. */
-# if @HAVE_DUP3@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define dup3 rpl_dup3
-# endif
-_GL_FUNCDECL_RPL (dup3, int, (int oldfd, int newfd, int flags));
-_GL_CXXALIAS_RPL (dup3, int, (int oldfd, int newfd, int flags));
-# else
-_GL_FUNCDECL_SYS (dup3, int, (int oldfd, int newfd, int flags));
-_GL_CXXALIAS_SYS (dup3, int, (int oldfd, int newfd, int flags));
-# endif
-_GL_CXXALIASWARN (dup3);
-#elif defined GNULIB_POSIXCHECK
-# undef dup3
-# if HAVE_RAW_DECL_DUP3
-_GL_WARN_ON_USE (dup3, "dup3 is unportable - "
- "use gnulib module dup3 for portability");
-# endif
-#endif
-
-
-#if @GNULIB_ENVIRON@
-# if !@HAVE_DECL_ENVIRON@
-/* Set of environment variables and values. An array of strings of the form
- "VARIABLE=VALUE", terminated with a NULL. */
-# if defined __APPLE__ && defined __MACH__
-# include <crt_externs.h>
-# define environ (*_NSGetEnviron ())
-# else
-# ifdef __cplusplus
-extern "C" {
-# endif
-extern char **environ;
-# ifdef __cplusplus
-}
-# endif
-# endif
-# endif
-#elif defined GNULIB_POSIXCHECK
-# if HAVE_RAW_DECL_ENVIRON
-static inline char ***
-rpl_environ (void)
-{
- return &environ;
-}
-_GL_WARN_ON_USE (rpl_environ, "environ is unportable - "
- "use gnulib module environ for portability");
-# undef environ
-# define environ (*rpl_environ ())
-# endif
-#endif
-
-
-#if @GNULIB_EUIDACCESS@
-/* Like access(), except that it uses the effective user id and group id of
- the current process. */
-# if !@HAVE_EUIDACCESS@
-_GL_FUNCDECL_SYS (euidaccess, int, (const char *filename, int mode)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (euidaccess, int, (const char *filename, int mode));
-_GL_CXXALIASWARN (euidaccess);
-# if defined GNULIB_POSIXCHECK
-/* Like access(), this function is a security risk. */
-_GL_WARN_ON_USE (euidaccess, "the euidaccess function is a security risk - "
- "use the gnulib module faccessat instead");
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef euidaccess
-# if HAVE_RAW_DECL_EUIDACCESS
-_GL_WARN_ON_USE (euidaccess, "euidaccess is unportable - "
- "use gnulib module euidaccess for portability");
-# endif
-#endif
-
-
-#if @GNULIB_FACCESSAT@
-# if !@HAVE_FACCESSAT@
-_GL_FUNCDECL_SYS (faccessat, int,
- (int fd, char const *file, int mode, int flag)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (faccessat, int,
- (int fd, char const *file, int mode, int flag));
-_GL_CXXALIASWARN (faccessat);
-#elif defined GNULIB_POSIXCHECK
-# undef faccessat
-# if HAVE_RAW_DECL_FACCESSAT
-_GL_WARN_ON_USE (faccessat, "faccessat is not portable - "
- "use gnulib module faccessat for portability");
-# endif
-#endif
-
-
-#if @GNULIB_FCHDIR@
-/* Change the process' current working directory to the directory on which
- the given file descriptor is open.
- Return 0 if successful, otherwise -1 and errno set.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/fchdir.html>. */
-# if ! @HAVE_FCHDIR@
-_GL_FUNCDECL_SYS (fchdir, int, (int /*fd*/));
-
-/* Gnulib internal hooks needed to maintain the fchdir metadata. */
-_GL_EXTERN_C int _gl_register_fd (int fd, const char *filename)
- _GL_ARG_NONNULL ((2));
-_GL_EXTERN_C void _gl_unregister_fd (int fd);
-_GL_EXTERN_C int _gl_register_dup (int oldfd, int newfd);
-_GL_EXTERN_C const char *_gl_directory_name (int fd);
-
-# else
-# if !@HAVE_DECL_FCHDIR@
-_GL_FUNCDECL_SYS (fchdir, int, (int /*fd*/));
-# endif
-# endif
-_GL_CXXALIAS_SYS (fchdir, int, (int /*fd*/));
-_GL_CXXALIASWARN (fchdir);
-#elif defined GNULIB_POSIXCHECK
-# undef fchdir
-# if HAVE_RAW_DECL_FCHDIR
-_GL_WARN_ON_USE (fchdir, "fchdir is unportable - "
- "use gnulib module fchdir for portability");
-# endif
-#endif
-
-
-#if @GNULIB_FCHOWNAT@
-# if @REPLACE_FCHOWNAT@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef fchownat
-# define fchownat rpl_fchownat
-# endif
-_GL_FUNCDECL_RPL (fchownat, int, (int fd, char const *file,
- uid_t owner, gid_t group, int flag)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (fchownat, int, (int fd, char const *file,
- uid_t owner, gid_t group, int flag));
-# else
-# if !@HAVE_FCHOWNAT@
-_GL_FUNCDECL_SYS (fchownat, int, (int fd, char const *file,
- uid_t owner, gid_t group, int flag)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (fchownat, int, (int fd, char const *file,
- uid_t owner, gid_t group, int flag));
-# endif
-_GL_CXXALIASWARN (fchownat);
-#elif defined GNULIB_POSIXCHECK
-# undef fchownat
-# if HAVE_RAW_DECL_FCHOWNAT
-_GL_WARN_ON_USE (fchownat, "fchownat is not portable - "
- "use gnulib module openat for portability");
-# endif
-#endif
-
-
-#if @GNULIB_FDATASYNC@
-/* Synchronize changes to a file.
- Return 0 if successful, otherwise -1 and errno set.
- See POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/fdatasync.html>. */
-# if !@HAVE_FDATASYNC@ || !@HAVE_DECL_FDATASYNC@
-_GL_FUNCDECL_SYS (fdatasync, int, (int fd));
-# endif
-_GL_CXXALIAS_SYS (fdatasync, int, (int fd));
-_GL_CXXALIASWARN (fdatasync);
-#elif defined GNULIB_POSIXCHECK
-# undef fdatasync
-# if HAVE_RAW_DECL_FDATASYNC
-_GL_WARN_ON_USE (fdatasync, "fdatasync is unportable - "
- "use gnulib module fdatasync for portability");
-# endif
-#endif
-
-
-#if @GNULIB_FSYNC@
-/* Synchronize changes, including metadata, to a file.
- Return 0 if successful, otherwise -1 and errno set.
- See POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/fsync.html>. */
-# if !@HAVE_FSYNC@
-_GL_FUNCDECL_SYS (fsync, int, (int fd));
-# endif
-_GL_CXXALIAS_SYS (fsync, int, (int fd));
-_GL_CXXALIASWARN (fsync);
-#elif defined GNULIB_POSIXCHECK
-# undef fsync
-# if HAVE_RAW_DECL_FSYNC
-_GL_WARN_ON_USE (fsync, "fsync is unportable - "
- "use gnulib module fsync for portability");
-# endif
-#endif
-
-
-#if @GNULIB_FTRUNCATE@
-/* Change the size of the file to which FD is opened to become equal to LENGTH.
- Return 0 if successful, otherwise -1 and errno set.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/ftruncate.html>. */
-# if !@HAVE_FTRUNCATE@
-_GL_FUNCDECL_SYS (ftruncate, int, (int fd, off_t length));
-# endif
-_GL_CXXALIAS_SYS (ftruncate, int, (int fd, off_t length));
-_GL_CXXALIASWARN (ftruncate);
-#elif defined GNULIB_POSIXCHECK
-# undef ftruncate
-# if HAVE_RAW_DECL_FTRUNCATE
-_GL_WARN_ON_USE (ftruncate, "ftruncate is unportable - "
- "use gnulib module ftruncate for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GETCWD@
-/* Get the name of the current working directory, and put it in SIZE bytes
- of BUF.
- Return BUF if successful, or NULL if the directory couldn't be determined
- or SIZE was too small.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/getcwd.html>.
- Additionally, the gnulib module 'getcwd' guarantees the following GNU
- extension: If BUF is NULL, an array is allocated with 'malloc'; the array
- is SIZE bytes long, unless SIZE == 0, in which case it is as big as
- necessary. */
-# if @REPLACE_GETCWD@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define getcwd rpl_getcwd
-# endif
-_GL_FUNCDECL_RPL (getcwd, char *, (char *buf, size_t size));
-_GL_CXXALIAS_RPL (getcwd, char *, (char *buf, size_t size));
-# else
-/* Need to cast, because on mingw, the second parameter is
- int size. */
-_GL_CXXALIAS_SYS_CAST (getcwd, char *, (char *buf, size_t size));
-# endif
-_GL_CXXALIASWARN (getcwd);
-#elif defined GNULIB_POSIXCHECK
-# undef getcwd
-# if HAVE_RAW_DECL_GETCWD
-_GL_WARN_ON_USE (getcwd, "getcwd is unportable - "
- "use gnulib module getcwd for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GETDOMAINNAME@
-/* Return the NIS domain name of the machine.
- WARNING! The NIS domain name is unrelated to the fully qualified host name
- of the machine. It is also unrelated to email addresses.
- WARNING! The NIS domain name is usually the empty string or "(none)" when
- not using NIS.
-
- Put up to LEN bytes of the NIS domain name into NAME.
- Null terminate it if the name is shorter than LEN.
- If the NIS domain name is longer than LEN, set errno = EINVAL and return -1.
- Return 0 if successful, otherwise set errno and return -1. */
-# if @REPLACE_GETDOMAINNAME@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef getdomainname
-# define getdomainname rpl_getdomainname
-# endif
-_GL_FUNCDECL_RPL (getdomainname, int, (char *name, size_t len)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (getdomainname, int, (char *name, size_t len));
-# else
-# if !@HAVE_DECL_GETDOMAINNAME@
-_GL_FUNCDECL_SYS (getdomainname, int, (char *name, size_t len)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (getdomainname, int, (char *name, size_t len));
-# endif
-_GL_CXXALIASWARN (getdomainname);
-#elif defined GNULIB_POSIXCHECK
-# undef getdomainname
-# if HAVE_RAW_DECL_GETDOMAINNAME
-_GL_WARN_ON_USE (getdomainname, "getdomainname is unportable - "
- "use gnulib module getdomainname for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GETDTABLESIZE@
-/* Return the maximum number of file descriptors in the current process.
- In POSIX, this is same as sysconf (_SC_OPEN_MAX). */
-# if !@HAVE_GETDTABLESIZE@
-_GL_FUNCDECL_SYS (getdtablesize, int, (void));
-# endif
-_GL_CXXALIAS_SYS (getdtablesize, int, (void));
-_GL_CXXALIASWARN (getdtablesize);
-#elif defined GNULIB_POSIXCHECK
-# undef getdtablesize
-# if HAVE_RAW_DECL_GETDTABLESIZE
-_GL_WARN_ON_USE (getdtablesize, "getdtablesize is unportable - "
- "use gnulib module getdtablesize for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GETGROUPS@
-/* Return the supplemental groups that the current process belongs to.
- It is unspecified whether the effective group id is in the list.
- If N is 0, return the group count; otherwise, N describes how many
- entries are available in GROUPS. Return -1 and set errno if N is
- not 0 and not large enough. Fails with ENOSYS on some systems. */
-# if @REPLACE_GETGROUPS@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef getgroups
-# define getgroups rpl_getgroups
-# endif
-_GL_FUNCDECL_RPL (getgroups, int, (int n, gid_t *groups));
-_GL_CXXALIAS_RPL (getgroups, int, (int n, gid_t *groups));
-# else
-# if !@HAVE_GETGROUPS@
-_GL_FUNCDECL_SYS (getgroups, int, (int n, gid_t *groups));
-# endif
-_GL_CXXALIAS_SYS (getgroups, int, (int n, gid_t *groups));
-# endif
-_GL_CXXALIASWARN (getgroups);
-#elif defined GNULIB_POSIXCHECK
-# undef getgroups
-# if HAVE_RAW_DECL_GETGROUPS
-_GL_WARN_ON_USE (getgroups, "getgroups is unportable - "
- "use gnulib module getgroups for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GETHOSTNAME@
-/* Return the standard host name of the machine.
- WARNING! The host name may or may not be fully qualified.
-
- Put up to LEN bytes of the host name into NAME.
- Null terminate it if the name is shorter than LEN.
- If the host name is longer than LEN, set errno = EINVAL and return -1.
- Return 0 if successful, otherwise set errno and return -1. */
-# if @UNISTD_H_HAVE_WINSOCK2_H@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef gethostname
-# define gethostname rpl_gethostname
-# endif
-_GL_FUNCDECL_RPL (gethostname, int, (char *name, size_t len)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (gethostname, int, (char *name, size_t len));
-# else
-# if !@HAVE_GETHOSTNAME@
-_GL_FUNCDECL_SYS (gethostname, int, (char *name, size_t len)
- _GL_ARG_NONNULL ((1)));
-# endif
-/* Need to cast, because on Solaris 10 and OSF/1 5.1 systems, the second
- parameter is
- int len. */
-_GL_CXXALIAS_SYS_CAST (gethostname, int, (char *name, size_t len));
-# endif
-_GL_CXXALIASWARN (gethostname);
-#elif @UNISTD_H_HAVE_WINSOCK2_H@
-# undef gethostname
-# define gethostname gethostname_used_without_requesting_gnulib_module_gethostname
-#elif defined GNULIB_POSIXCHECK
-# undef gethostname
-# if HAVE_RAW_DECL_GETHOSTNAME
-_GL_WARN_ON_USE (gethostname, "gethostname is unportable - "
- "use gnulib module gethostname for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GETLOGIN@
-/* Returns the user's login name, or NULL if it cannot be found. Upon error,
- returns NULL with errno set.
-
- See <http://www.opengroup.org/susv3xsh/getlogin.html>.
-
- Most programs don't need to use this function, because the information is
- available through environment variables:
- ${LOGNAME-$USER} on Unix platforms,
- $USERNAME on native Windows platforms.
- */
-# if !@HAVE_GETLOGIN@
-_GL_FUNCDECL_SYS (getlogin, char *, (void));
-# endif
-_GL_CXXALIAS_SYS (getlogin, char *, (void));
-_GL_CXXALIASWARN (getlogin);
-#elif defined GNULIB_POSIXCHECK
-# undef getlogin
-# if HAVE_RAW_DECL_GETLOGIN
-_GL_WARN_ON_USE (getlogin, "getlogin is unportable - "
- "use gnulib module getlogin for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GETLOGIN_R@
-/* Copies the user's login name to NAME.
- The array pointed to by NAME has room for SIZE bytes.
-
- Returns 0 if successful. Upon error, an error number is returned, or -1 in
- the case that the login name cannot be found but no specific error is
- provided (this case is hopefully rare but is left open by the POSIX spec).
-
- See <http://www.opengroup.org/susv3xsh/getlogin.html>.
-
- Most programs don't need to use this function, because the information is
- available through environment variables:
- ${LOGNAME-$USER} on Unix platforms,
- $USERNAME on native Windows platforms.
- */
-# if @REPLACE_GETLOGIN_R@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define getlogin_r rpl_getlogin_r
-# endif
-_GL_FUNCDECL_RPL (getlogin_r, int, (char *name, size_t size)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (getlogin_r, int, (char *name, size_t size));
-# else
-# if !@HAVE_DECL_GETLOGIN_R@
-_GL_FUNCDECL_SYS (getlogin_r, int, (char *name, size_t size)
- _GL_ARG_NONNULL ((1)));
-# endif
-/* Need to cast, because on Solaris 10 systems, the second argument is
- int size. */
-_GL_CXXALIAS_SYS_CAST (getlogin_r, int, (char *name, size_t size));
-# endif
-_GL_CXXALIASWARN (getlogin_r);
-#elif defined GNULIB_POSIXCHECK
-# undef getlogin_r
-# if HAVE_RAW_DECL_GETLOGIN_R
-_GL_WARN_ON_USE (getlogin_r, "getlogin_r is unportable - "
- "use gnulib module getlogin_r for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GETPAGESIZE@
-# if @REPLACE_GETPAGESIZE@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define getpagesize rpl_getpagesize
-# endif
-_GL_FUNCDECL_RPL (getpagesize, int, (void));
-_GL_CXXALIAS_RPL (getpagesize, int, (void));
-# else
-# if !@HAVE_GETPAGESIZE@
-# if !defined getpagesize
-/* This is for POSIX systems. */
-# if !defined _gl_getpagesize && defined _SC_PAGESIZE
-# if ! (defined __VMS && __VMS_VER < 70000000)
-# define _gl_getpagesize() sysconf (_SC_PAGESIZE)
-# endif
-# endif
-/* This is for older VMS. */
-# if !defined _gl_getpagesize && defined __VMS
-# ifdef __ALPHA
-# define _gl_getpagesize() 8192
-# else
-# define _gl_getpagesize() 512
-# endif
-# endif
-/* This is for BeOS. */
-# if !defined _gl_getpagesize && @HAVE_OS_H@
-# include <OS.h>
-# if defined B_PAGE_SIZE
-# define _gl_getpagesize() B_PAGE_SIZE
-# endif
-# endif
-/* This is for AmigaOS4.0. */
-# if !defined _gl_getpagesize && defined __amigaos4__
-# define _gl_getpagesize() 2048
-# endif
-/* This is for older Unix systems. */
-# if !defined _gl_getpagesize && @HAVE_SYS_PARAM_H@
-# include <sys/param.h>
-# ifdef EXEC_PAGESIZE
-# define _gl_getpagesize() EXEC_PAGESIZE
-# else
-# ifdef NBPG
-# ifndef CLSIZE
-# define CLSIZE 1
-# endif
-# define _gl_getpagesize() (NBPG * CLSIZE)
-# else
-# ifdef NBPC
-# define _gl_getpagesize() NBPC
-# endif
-# endif
-# endif
-# endif
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define getpagesize() _gl_getpagesize ()
-# else
-# if !GNULIB_defined_getpagesize_function
-static inline int
-getpagesize ()
-{
- return _gl_getpagesize ();
-}
-# define GNULIB_defined_getpagesize_function 1
-# endif
-# endif
-# endif
-# endif
-/* Need to cast, because on Cygwin 1.5.x systems, the return type is size_t. */
-_GL_CXXALIAS_SYS_CAST (getpagesize, int, (void));
-# endif
-# if @HAVE_DECL_GETPAGESIZE@
-_GL_CXXALIASWARN (getpagesize);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef getpagesize
-# if HAVE_RAW_DECL_GETPAGESIZE
-_GL_WARN_ON_USE (getpagesize, "getpagesize is unportable - "
- "use gnulib module getpagesize for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GETUSERSHELL@
-/* Return the next valid login shell on the system, or NULL when the end of
- the list has been reached. */
-# if !@HAVE_DECL_GETUSERSHELL@
-_GL_FUNCDECL_SYS (getusershell, char *, (void));
-# endif
-_GL_CXXALIAS_SYS (getusershell, char *, (void));
-_GL_CXXALIASWARN (getusershell);
-#elif defined GNULIB_POSIXCHECK
-# undef getusershell
-# if HAVE_RAW_DECL_GETUSERSHELL
-_GL_WARN_ON_USE (getusershell, "getusershell is unportable - "
- "use gnulib module getusershell for portability");
-# endif
-#endif
-
-#if @GNULIB_GETUSERSHELL@
-/* Rewind to pointer that is advanced at each getusershell() call. */
-# if !@HAVE_DECL_GETUSERSHELL@
-_GL_FUNCDECL_SYS (setusershell, void, (void));
-# endif
-_GL_CXXALIAS_SYS (setusershell, void, (void));
-_GL_CXXALIASWARN (setusershell);
-#elif defined GNULIB_POSIXCHECK
-# undef setusershell
-# if HAVE_RAW_DECL_SETUSERSHELL
-_GL_WARN_ON_USE (setusershell, "setusershell is unportable - "
- "use gnulib module getusershell for portability");
-# endif
-#endif
-
-#if @GNULIB_GETUSERSHELL@
-/* Free the pointer that is advanced at each getusershell() call and
- associated resources. */
-# if !@HAVE_DECL_GETUSERSHELL@
-_GL_FUNCDECL_SYS (endusershell, void, (void));
-# endif
-_GL_CXXALIAS_SYS (endusershell, void, (void));
-_GL_CXXALIASWARN (endusershell);
-#elif defined GNULIB_POSIXCHECK
-# undef endusershell
-# if HAVE_RAW_DECL_ENDUSERSHELL
-_GL_WARN_ON_USE (endusershell, "endusershell is unportable - "
- "use gnulib module getusershell for portability");
-# endif
-#endif
-
-
-#if @GNULIB_GROUP_MEMBER@
-/* Determine whether group id is in calling user's group list. */
-# if !@HAVE_GROUP_MEMBER@
-_GL_FUNCDECL_SYS (group_member, int, (gid_t gid));
-# endif
-_GL_CXXALIAS_SYS (group_member, int, (gid_t gid));
-_GL_CXXALIASWARN (group_member);
-#elif defined GNULIB_POSIXCHECK
-# undef group_member
-# if HAVE_RAW_DECL_GROUP_MEMBER
-_GL_WARN_ON_USE (group_member, "group_member is unportable - "
- "use gnulib module group-member for portability");
-# endif
-#endif
-
-
-#if @GNULIB_ISATTY@
-# if @REPLACE_ISATTY@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef isatty
-# define isatty rpl_isatty
-# endif
-_GL_FUNCDECL_RPL (isatty, int, (int fd));
-_GL_CXXALIAS_RPL (isatty, int, (int fd));
-# else
-_GL_CXXALIAS_SYS (isatty, int, (int fd));
-# endif
-_GL_CXXALIASWARN (isatty);
-#elif defined GNULIB_POSIXCHECK
-# undef isatty
-# if HAVE_RAW_DECL_ISATTY
-_GL_WARN_ON_USE (isatty, "isatty has portability problems on native Windows - "
- "use gnulib module isatty for portability");
-# endif
-#endif
-
-
-#if @GNULIB_LCHOWN@
-/* Change the owner of FILE to UID (if UID is not -1) and the group of FILE
- to GID (if GID is not -1). Do not follow symbolic links.
- Return 0 if successful, otherwise -1 and errno set.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/lchown.html>. */
-# if @REPLACE_LCHOWN@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef lchown
-# define lchown rpl_lchown
-# endif
-_GL_FUNCDECL_RPL (lchown, int, (char const *file, uid_t owner, gid_t group)
- _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (lchown, int, (char const *file, uid_t owner, gid_t group));
-# else
-# if !@HAVE_LCHOWN@
-_GL_FUNCDECL_SYS (lchown, int, (char const *file, uid_t owner, gid_t group)
- _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (lchown, int, (char const *file, uid_t owner, gid_t group));
-# endif
-_GL_CXXALIASWARN (lchown);
-#elif defined GNULIB_POSIXCHECK
-# undef lchown
-# if HAVE_RAW_DECL_LCHOWN
-_GL_WARN_ON_USE (lchown, "lchown is unportable to pre-POSIX.1-2001 systems - "
- "use gnulib module lchown for portability");
-# endif
-#endif
-
-
-#if @GNULIB_LINK@
-/* Create a new hard link for an existing file.
- Return 0 if successful, otherwise -1 and errno set.
- See POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/link.html>. */
-# if @REPLACE_LINK@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define link rpl_link
-# endif
-_GL_FUNCDECL_RPL (link, int, (const char *path1, const char *path2)
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (link, int, (const char *path1, const char *path2));
-# else
-# if !@HAVE_LINK@
-_GL_FUNCDECL_SYS (link, int, (const char *path1, const char *path2)
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (link, int, (const char *path1, const char *path2));
-# endif
-_GL_CXXALIASWARN (link);
-#elif defined GNULIB_POSIXCHECK
-# undef link
-# if HAVE_RAW_DECL_LINK
-_GL_WARN_ON_USE (link, "link is unportable - "
- "use gnulib module link for portability");
-# endif
-#endif
-
-
-#if @GNULIB_LINKAT@
-/* Create a new hard link for an existing file, relative to two
- directories. FLAG controls whether symlinks are followed.
- Return 0 if successful, otherwise -1 and errno set. */
-# if @REPLACE_LINKAT@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef linkat
-# define linkat rpl_linkat
-# endif
-_GL_FUNCDECL_RPL (linkat, int,
- (int fd1, const char *path1, int fd2, const char *path2,
- int flag)
- _GL_ARG_NONNULL ((2, 4)));
-_GL_CXXALIAS_RPL (linkat, int,
- (int fd1, const char *path1, int fd2, const char *path2,
- int flag));
-# else
-# if !@HAVE_LINKAT@
-_GL_FUNCDECL_SYS (linkat, int,
- (int fd1, const char *path1, int fd2, const char *path2,
- int flag)
- _GL_ARG_NONNULL ((2, 4)));
-# endif
-_GL_CXXALIAS_SYS (linkat, int,
- (int fd1, const char *path1, int fd2, const char *path2,
- int flag));
-# endif
-_GL_CXXALIASWARN (linkat);
-#elif defined GNULIB_POSIXCHECK
-# undef linkat
-# if HAVE_RAW_DECL_LINKAT
-_GL_WARN_ON_USE (linkat, "linkat is unportable - "
- "use gnulib module linkat for portability");
-# endif
-#endif
-
-
-#if @GNULIB_LSEEK@
-/* Set the offset of FD relative to SEEK_SET, SEEK_CUR, or SEEK_END.
- Return the new offset if successful, otherwise -1 and errno set.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/lseek.html>. */
-# if @REPLACE_LSEEK@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define lseek rpl_lseek
-# endif
-_GL_FUNCDECL_RPL (lseek, off_t, (int fd, off_t offset, int whence));
-_GL_CXXALIAS_RPL (lseek, off_t, (int fd, off_t offset, int whence));
-# else
-_GL_CXXALIAS_SYS (lseek, off_t, (int fd, off_t offset, int whence));
-# endif
-_GL_CXXALIASWARN (lseek);
-#elif defined GNULIB_POSIXCHECK
-# undef lseek
-# if HAVE_RAW_DECL_LSEEK
-_GL_WARN_ON_USE (lseek, "lseek does not fail with ESPIPE on pipes on some "
- "systems - use gnulib module lseek for portability");
-# endif
-#endif
-
-
-#if @GNULIB_PIPE@
-/* Create a pipe, defaulting to O_BINARY mode.
- Store the read-end as fd[0] and the write-end as fd[1].
- Return 0 upon success, or -1 with errno set upon failure. */
-# if !@HAVE_PIPE@
-_GL_FUNCDECL_SYS (pipe, int, (int fd[2]) _GL_ARG_NONNULL ((1)));
-# endif
-_GL_CXXALIAS_SYS (pipe, int, (int fd[2]));
-_GL_CXXALIASWARN (pipe);
-#elif defined GNULIB_POSIXCHECK
-# undef pipe
-# if HAVE_RAW_DECL_PIPE
-_GL_WARN_ON_USE (pipe, "pipe is unportable - "
- "use gnulib module pipe-posix for portability");
-# endif
-#endif
-
-
-#if @GNULIB_PIPE2@
-/* Create a pipe, applying the given flags when opening the read-end of the
- pipe and the write-end of the pipe.
- The flags are a bitmask, possibly including O_CLOEXEC (defined in <fcntl.h>)
- and O_TEXT, O_BINARY (defined in "binary-io.h").
- Store the read-end as fd[0] and the write-end as fd[1].
- Return 0 upon success, or -1 with errno set upon failure.
- See also the Linux man page at
- <http://www.kernel.org/doc/man-pages/online/pages/man2/pipe2.2.html>. */
-# if @HAVE_PIPE2@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define pipe2 rpl_pipe2
-# endif
-_GL_FUNCDECL_RPL (pipe2, int, (int fd[2], int flags) _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (pipe2, int, (int fd[2], int flags));
-# else
-_GL_FUNCDECL_SYS (pipe2, int, (int fd[2], int flags) _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_SYS (pipe2, int, (int fd[2], int flags));
-# endif
-_GL_CXXALIASWARN (pipe2);
-#elif defined GNULIB_POSIXCHECK
-# undef pipe2
-# if HAVE_RAW_DECL_PIPE2
-_GL_WARN_ON_USE (pipe2, "pipe2 is unportable - "
- "use gnulib module pipe2 for portability");
-# endif
-#endif
-
-
-#if @GNULIB_PREAD@
-/* Read at most BUFSIZE bytes from FD into BUF, starting at OFFSET.
- Return the number of bytes placed into BUF if successful, otherwise
- set errno and return -1. 0 indicates EOF.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/pread.html>. */
-# if @REPLACE_PREAD@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef pread
-# define pread rpl_pread
-# endif
-_GL_FUNCDECL_RPL (pread, ssize_t,
- (int fd, void *buf, size_t bufsize, off_t offset)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (pread, ssize_t,
- (int fd, void *buf, size_t bufsize, off_t offset));
-# else
-# if !@HAVE_PREAD@
-_GL_FUNCDECL_SYS (pread, ssize_t,
- (int fd, void *buf, size_t bufsize, off_t offset)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (pread, ssize_t,
- (int fd, void *buf, size_t bufsize, off_t offset));
-# endif
-_GL_CXXALIASWARN (pread);
-#elif defined GNULIB_POSIXCHECK
-# undef pread
-# if HAVE_RAW_DECL_PREAD
-_GL_WARN_ON_USE (pread, "pread is unportable - "
- "use gnulib module pread for portability");
-# endif
-#endif
-
-
-#if @GNULIB_PWRITE@
-/* Write at most BUFSIZE bytes from BUF into FD, starting at OFFSET.
- Return the number of bytes written if successful, otherwise
- set errno and return -1. 0 indicates nothing written. See the
- POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/pwrite.html>. */
-# if @REPLACE_PWRITE@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef pwrite
-# define pwrite rpl_pwrite
-# endif
-_GL_FUNCDECL_RPL (pwrite, ssize_t,
- (int fd, const void *buf, size_t bufsize, off_t offset)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (pwrite, ssize_t,
- (int fd, const void *buf, size_t bufsize, off_t offset));
-# else
-# if !@HAVE_PWRITE@
-_GL_FUNCDECL_SYS (pwrite, ssize_t,
- (int fd, const void *buf, size_t bufsize, off_t offset)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (pwrite, ssize_t,
- (int fd, const void *buf, size_t bufsize, off_t offset));
-# endif
-_GL_CXXALIASWARN (pwrite);
-#elif defined GNULIB_POSIXCHECK
-# undef pwrite
-# if HAVE_RAW_DECL_PWRITE
-_GL_WARN_ON_USE (pwrite, "pwrite is unportable - "
- "use gnulib module pwrite for portability");
-# endif
-#endif
-
-
-#if @GNULIB_READ@
-/* Read up to COUNT bytes from file descriptor FD into the buffer starting
- at BUF. See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/read.html>. */
-# if @REPLACE_READ@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef read
-# define read rpl_read
-# endif
-_GL_FUNCDECL_RPL (read, ssize_t, (int fd, void *buf, size_t count)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (read, ssize_t, (int fd, void *buf, size_t count));
-# else
-/* Need to cast, because on mingw, the third parameter is
- unsigned int count
- and the return type is 'int'. */
-_GL_CXXALIAS_SYS_CAST (read, ssize_t, (int fd, void *buf, size_t count));
-# endif
-_GL_CXXALIASWARN (read);
-#endif
-
-
-#if @GNULIB_READLINK@
-/* Read the contents of the symbolic link FILE and place the first BUFSIZE
- bytes of it into BUF. Return the number of bytes placed into BUF if
- successful, otherwise -1 and errno set.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/readlink.html>. */
-# if @REPLACE_READLINK@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define readlink rpl_readlink
-# endif
-_GL_FUNCDECL_RPL (readlink, ssize_t,
- (const char *file, char *buf, size_t bufsize)
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (readlink, ssize_t,
- (const char *file, char *buf, size_t bufsize));
-# else
-# if !@HAVE_READLINK@
-_GL_FUNCDECL_SYS (readlink, ssize_t,
- (const char *file, char *buf, size_t bufsize)
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (readlink, ssize_t,
- (const char *file, char *buf, size_t bufsize));
-# endif
-_GL_CXXALIASWARN (readlink);
-#elif defined GNULIB_POSIXCHECK
-# undef readlink
-# if HAVE_RAW_DECL_READLINK
-_GL_WARN_ON_USE (readlink, "readlink is unportable - "
- "use gnulib module readlink for portability");
-# endif
-#endif
-
-
-#if @GNULIB_READLINKAT@
-# if !@HAVE_READLINKAT@
-_GL_FUNCDECL_SYS (readlinkat, ssize_t,
- (int fd, char const *file, char *buf, size_t len)
- _GL_ARG_NONNULL ((2, 3)));
-# endif
-_GL_CXXALIAS_SYS (readlinkat, ssize_t,
- (int fd, char const *file, char *buf, size_t len));
-_GL_CXXALIASWARN (readlinkat);
-#elif defined GNULIB_POSIXCHECK
-# undef readlinkat
-# if HAVE_RAW_DECL_READLINKAT
-_GL_WARN_ON_USE (readlinkat, "readlinkat is not portable - "
- "use gnulib module readlinkat for portability");
-# endif
-#endif
-
-
-#if @GNULIB_RMDIR@
-/* Remove the directory DIR. */
-# if @REPLACE_RMDIR@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define rmdir rpl_rmdir
-# endif
-_GL_FUNCDECL_RPL (rmdir, int, (char const *name) _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (rmdir, int, (char const *name));
-# else
-_GL_CXXALIAS_SYS (rmdir, int, (char const *name));
-# endif
-_GL_CXXALIASWARN (rmdir);
-#elif defined GNULIB_POSIXCHECK
-# undef rmdir
-# if HAVE_RAW_DECL_RMDIR
-_GL_WARN_ON_USE (rmdir, "rmdir is unportable - "
- "use gnulib module rmdir for portability");
-# endif
-#endif
-
-
-#if @GNULIB_SETHOSTNAME@
-/* Set the host name of the machine.
- The host name may or may not be fully qualified.
-
- Put LEN bytes of NAME into the host name.
- Return 0 if successful, otherwise, set errno and return -1.
-
- Platforms with no ability to set the hostname return -1 and set
- errno = ENOSYS. */
-# if !@HAVE_SETHOSTNAME@ || !@HAVE_DECL_SETHOSTNAME@
-_GL_FUNCDECL_SYS (sethostname, int, (const char *name, size_t len)
- _GL_ARG_NONNULL ((1)));
-# endif
-/* Need to cast, because on Solaris 11 2011-10, MacOS X 10.5, IRIX 6.5
- and FreeBSD 6.4 the second parameter is int. On Solaris 11
- 2011-10, the first parameter is not const. */
-_GL_CXXALIAS_SYS_CAST (sethostname, int, (const char *name, size_t len));
-_GL_CXXALIASWARN (sethostname);
-#elif defined GNULIB_POSIXCHECK
-# undef sethostname
-# if HAVE_RAW_DECL_SETHOSTNAME
-_GL_WARN_ON_USE (sethostname, "sethostname is unportable - "
- "use gnulib module sethostname for portability");
-# endif
-#endif
-
-
-#if @GNULIB_SLEEP@
-/* Pause the execution of the current thread for N seconds.
- Returns the number of seconds left to sleep.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/sleep.html>. */
-# if @REPLACE_SLEEP@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef sleep
-# define sleep rpl_sleep
-# endif
-_GL_FUNCDECL_RPL (sleep, unsigned int, (unsigned int n));
-_GL_CXXALIAS_RPL (sleep, unsigned int, (unsigned int n));
-# else
-# if !@HAVE_SLEEP@
-_GL_FUNCDECL_SYS (sleep, unsigned int, (unsigned int n));
-# endif
-_GL_CXXALIAS_SYS (sleep, unsigned int, (unsigned int n));
-# endif
-_GL_CXXALIASWARN (sleep);
-#elif defined GNULIB_POSIXCHECK
-# undef sleep
-# if HAVE_RAW_DECL_SLEEP
-_GL_WARN_ON_USE (sleep, "sleep is unportable - "
- "use gnulib module sleep for portability");
-# endif
-#endif
-
-
-#if @GNULIB_SYMLINK@
-# if @REPLACE_SYMLINK@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef symlink
-# define symlink rpl_symlink
-# endif
-_GL_FUNCDECL_RPL (symlink, int, (char const *contents, char const *file)
- _GL_ARG_NONNULL ((1, 2)));
-_GL_CXXALIAS_RPL (symlink, int, (char const *contents, char const *file));
-# else
-# if !@HAVE_SYMLINK@
-_GL_FUNCDECL_SYS (symlink, int, (char const *contents, char const *file)
- _GL_ARG_NONNULL ((1, 2)));
-# endif
-_GL_CXXALIAS_SYS (symlink, int, (char const *contents, char const *file));
-# endif
-_GL_CXXALIASWARN (symlink);
-#elif defined GNULIB_POSIXCHECK
-# undef symlink
-# if HAVE_RAW_DECL_SYMLINK
-_GL_WARN_ON_USE (symlink, "symlink is not portable - "
- "use gnulib module symlink for portability");
-# endif
-#endif
-
-
-#if @GNULIB_SYMLINKAT@
-# if !@HAVE_SYMLINKAT@
-_GL_FUNCDECL_SYS (symlinkat, int,
- (char const *contents, int fd, char const *file)
- _GL_ARG_NONNULL ((1, 3)));
-# endif
-_GL_CXXALIAS_SYS (symlinkat, int,
- (char const *contents, int fd, char const *file));
-_GL_CXXALIASWARN (symlinkat);
-#elif defined GNULIB_POSIXCHECK
-# undef symlinkat
-# if HAVE_RAW_DECL_SYMLINKAT
-_GL_WARN_ON_USE (symlinkat, "symlinkat is not portable - "
- "use gnulib module symlinkat for portability");
-# endif
-#endif
-
-
-#if @GNULIB_TTYNAME_R@
-/* Store at most BUFLEN characters of the pathname of the terminal FD is
- open on in BUF. Return 0 on success, otherwise an error number. */
-# if @REPLACE_TTYNAME_R@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef ttyname_r
-# define ttyname_r rpl_ttyname_r
-# endif
-_GL_FUNCDECL_RPL (ttyname_r, int,
- (int fd, char *buf, size_t buflen) _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (ttyname_r, int,
- (int fd, char *buf, size_t buflen));
-# else
-# if !@HAVE_DECL_TTYNAME_R@
-_GL_FUNCDECL_SYS (ttyname_r, int,
- (int fd, char *buf, size_t buflen) _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (ttyname_r, int,
- (int fd, char *buf, size_t buflen));
-# endif
-_GL_CXXALIASWARN (ttyname_r);
-#elif defined GNULIB_POSIXCHECK
-# undef ttyname_r
-# if HAVE_RAW_DECL_TTYNAME_R
-_GL_WARN_ON_USE (ttyname_r, "ttyname_r is not portable - "
- "use gnulib module ttyname_r for portability");
-# endif
-#endif
-
-
-#if @GNULIB_UNLINK@
-# if @REPLACE_UNLINK@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef unlink
-# define unlink rpl_unlink
-# endif
-_GL_FUNCDECL_RPL (unlink, int, (char const *file) _GL_ARG_NONNULL ((1)));
-_GL_CXXALIAS_RPL (unlink, int, (char const *file));
-# else
-_GL_CXXALIAS_SYS (unlink, int, (char const *file));
-# endif
-_GL_CXXALIASWARN (unlink);
-#elif defined GNULIB_POSIXCHECK
-# undef unlink
-# if HAVE_RAW_DECL_UNLINK
-_GL_WARN_ON_USE (unlink, "unlink is not portable - "
- "use gnulib module unlink for portability");
-# endif
-#endif
-
-
-#if @GNULIB_UNLINKAT@
-# if @REPLACE_UNLINKAT@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef unlinkat
-# define unlinkat rpl_unlinkat
-# endif
-_GL_FUNCDECL_RPL (unlinkat, int, (int fd, char const *file, int flag)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (unlinkat, int, (int fd, char const *file, int flag));
-# else
-# if !@HAVE_UNLINKAT@
-_GL_FUNCDECL_SYS (unlinkat, int, (int fd, char const *file, int flag)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (unlinkat, int, (int fd, char const *file, int flag));
-# endif
-_GL_CXXALIASWARN (unlinkat);
-#elif defined GNULIB_POSIXCHECK
-# undef unlinkat
-# if HAVE_RAW_DECL_UNLINKAT
-_GL_WARN_ON_USE (unlinkat, "unlinkat is not portable - "
- "use gnulib module openat for portability");
-# endif
-#endif
-
-
-#if @GNULIB_USLEEP@
-/* Pause the execution of the current thread for N microseconds.
- Returns 0 on completion, or -1 on range error.
- See the POSIX:2001 specification
- <http://www.opengroup.org/susv3xsh/usleep.html>. */
-# if @REPLACE_USLEEP@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef usleep
-# define usleep rpl_usleep
-# endif
-_GL_FUNCDECL_RPL (usleep, int, (useconds_t n));
-_GL_CXXALIAS_RPL (usleep, int, (useconds_t n));
-# else
-# if !@HAVE_USLEEP@
-_GL_FUNCDECL_SYS (usleep, int, (useconds_t n));
-# endif
-_GL_CXXALIAS_SYS (usleep, int, (useconds_t n));
-# endif
-_GL_CXXALIASWARN (usleep);
-#elif defined GNULIB_POSIXCHECK
-# undef usleep
-# if HAVE_RAW_DECL_USLEEP
-_GL_WARN_ON_USE (usleep, "usleep is unportable - "
- "use gnulib module usleep for portability");
-# endif
-#endif
-
-
-#if @GNULIB_WRITE@
-/* Write up to COUNT bytes starting at BUF to file descriptor FD.
- See the POSIX:2008 specification
- <http://pubs.opengroup.org/onlinepubs/9699919799/functions/write.html>. */
-# if @REPLACE_WRITE@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef write
-# define write rpl_write
-# endif
-_GL_FUNCDECL_RPL (write, ssize_t, (int fd, const void *buf, size_t count)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (write, ssize_t, (int fd, const void *buf, size_t count));
-# else
-/* Need to cast, because on mingw, the third parameter is
- unsigned int count
- and the return type is 'int'. */
-_GL_CXXALIAS_SYS_CAST (write, ssize_t, (int fd, const void *buf, size_t count));
-# endif
-_GL_CXXALIASWARN (write);
-#endif
-
-
-#endif /* _@GUARD_PREFIX@_UNISTD_H */
-#endif /* _@GUARD_PREFIX@_UNISTD_H */
+++ /dev/null
-/* Compile-time assert-like macros.
-
- Copyright (C) 2005-2006, 2009-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Paul Eggert, Bruno Haible, and Jim Meyering. */
-
-#ifndef _GL_VERIFY_H
-# define _GL_VERIFY_H
-
-
-/* Define _GL_HAVE__STATIC_ASSERT to 1 if _Static_assert works as per C11.
- This is supported by GCC 4.6.0 and later, in C mode, and its use
- here generates easier-to-read diagnostics when verify (R) fails.
-
- Define _GL_HAVE_STATIC_ASSERT to 1 if static_assert works as per C++11.
- This will likely be supported by future GCC versions, in C++ mode.
-
- Use this only with GCC. If we were willing to slow 'configure'
- down we could also use it with other compilers, but since this
- affects only the quality of diagnostics, why bother? */
-# if (4 < __GNUC__ || (__GNUC__ == 4 && 6 <= __GNUC_MINOR__)) && !defined __cplusplus
-# define _GL_HAVE__STATIC_ASSERT 1
-# endif
-/* The condition (99 < __GNUC__) is temporary, until we know about the
- first G++ release that supports static_assert. */
-# if (99 < __GNUC__) && defined __cplusplus
-# define _GL_HAVE_STATIC_ASSERT 1
-# endif
-
-/* Each of these macros verifies that its argument R is nonzero. To
- be portable, R should be an integer constant expression. Unlike
- assert (R), there is no run-time overhead.
-
- If _Static_assert works, verify (R) uses it directly. Similarly,
- _GL_VERIFY_TRUE works by packaging a _Static_assert inside a struct
- that is an operand of sizeof.
-
- The code below uses several ideas for C++ compilers, and for C
- compilers that do not support _Static_assert:
-
- * The first step is ((R) ? 1 : -1). Given an expression R, of
- integral or boolean or floating-point type, this yields an
- expression of integral type, whose value is later verified to be
- constant and nonnegative.
-
- * Next this expression W is wrapped in a type
- struct _gl_verify_type {
- unsigned int _gl_verify_error_if_negative: W;
- }.
- If W is negative, this yields a compile-time error. No compiler can
- deal with a bit-field of negative size.
-
- One might think that an array size check would have the same
- effect, that is, that the type struct { unsigned int dummy[W]; }
- would work as well. However, inside a function, some compilers
- (such as C++ compilers and GNU C) allow local parameters and
- variables inside array size expressions. With these compilers,
- an array size check would not properly diagnose this misuse of
- the verify macro:
-
- void function (int n) { verify (n < 0); }
-
- * For the verify macro, the struct _gl_verify_type will need to
- somehow be embedded into a declaration. To be portable, this
- declaration must declare an object, a constant, a function, or a
- typedef name. If the declared entity uses the type directly,
- such as in
-
- struct dummy {...};
- typedef struct {...} dummy;
- extern struct {...} *dummy;
- extern void dummy (struct {...} *);
- extern struct {...} *dummy (void);
-
- two uses of the verify macro would yield colliding declarations
- if the entity names are not disambiguated. A workaround is to
- attach the current line number to the entity name:
-
- #define _GL_CONCAT0(x, y) x##y
- #define _GL_CONCAT(x, y) _GL_CONCAT0 (x, y)
- extern struct {...} * _GL_CONCAT (dummy, __LINE__);
-
- But this has the problem that two invocations of verify from
- within the same macro would collide, since the __LINE__ value
- would be the same for both invocations. (The GCC __COUNTER__
- macro solves this problem, but is not portable.)
-
- A solution is to use the sizeof operator. It yields a number,
- getting rid of the identity of the type. Declarations like
-
- extern int dummy [sizeof (struct {...})];
- extern void dummy (int [sizeof (struct {...})]);
- extern int (*dummy (void)) [sizeof (struct {...})];
-
- can be repeated.
-
- * Should the implementation use a named struct or an unnamed struct?
- Which of the following alternatives can be used?
-
- extern int dummy [sizeof (struct {...})];
- extern int dummy [sizeof (struct _gl_verify_type {...})];
- extern void dummy (int [sizeof (struct {...})]);
- extern void dummy (int [sizeof (struct _gl_verify_type {...})]);
- extern int (*dummy (void)) [sizeof (struct {...})];
- extern int (*dummy (void)) [sizeof (struct _gl_verify_type {...})];
-
- In the second and sixth case, the struct type is exported to the
- outer scope; two such declarations therefore collide. GCC warns
- about the first, third, and fourth cases. So the only remaining
- possibility is the fifth case:
-
- extern int (*dummy (void)) [sizeof (struct {...})];
-
- * GCC warns about duplicate declarations of the dummy function if
- -Wredundant_decls is used. GCC 4.3 and later have a builtin
- __COUNTER__ macro that can let us generate unique identifiers for
- each dummy function, to suppress this warning.
-
- * This implementation exploits the fact that older versions of GCC,
- which do not support _Static_assert, also do not warn about the
- last declaration mentioned above.
-
- * In C++, any struct definition inside sizeof is invalid.
- Use a template type to work around the problem. */
-
-/* Concatenate two preprocessor tokens. */
-# define _GL_CONCAT(x, y) _GL_CONCAT0 (x, y)
-# define _GL_CONCAT0(x, y) x##y
-
-/* _GL_COUNTER is an integer, preferably one that changes each time we
- use it. Use __COUNTER__ if it works, falling back on __LINE__
- otherwise. __LINE__ isn't perfect, but it's better than a
- constant. */
-# if defined __COUNTER__ && __COUNTER__ != __COUNTER__
-# define _GL_COUNTER __COUNTER__
-# else
-# define _GL_COUNTER __LINE__
-# endif
-
-/* Generate a symbol with the given prefix, making it unique if
- possible. */
-# define _GL_GENSYM(prefix) _GL_CONCAT (prefix, _GL_COUNTER)
-
-/* Verify requirement R at compile-time, as an integer constant expression
- that returns 1. If R is false, fail at compile-time, preferably
- with a diagnostic that includes the string-literal DIAGNOSTIC. */
-
-# define _GL_VERIFY_TRUE(R, DIAGNOSTIC) \
- (!!sizeof (_GL_VERIFY_TYPE (R, DIAGNOSTIC)))
-
-# ifdef __cplusplus
-# if !GNULIB_defined_struct__gl_verify_type
-template <int w>
- struct _gl_verify_type {
- unsigned int _gl_verify_error_if_negative: w;
- };
-# define GNULIB_defined_struct__gl_verify_type 1
-# endif
-# define _GL_VERIFY_TYPE(R, DIAGNOSTIC) \
- _gl_verify_type<(R) ? 1 : -1>
-# elif defined _GL_HAVE__STATIC_ASSERT
-# define _GL_VERIFY_TYPE(R, DIAGNOSTIC) \
- struct { \
- _Static_assert (R, DIAGNOSTIC); \
- int _gl_dummy; \
- }
-# else
-# define _GL_VERIFY_TYPE(R, DIAGNOSTIC) \
- struct { unsigned int _gl_verify_error_if_negative: (R) ? 1 : -1; }
-# endif
-
-/* Verify requirement R at compile-time, as a declaration without a
- trailing ';'. If R is false, fail at compile-time, preferably
- with a diagnostic that includes the string-literal DIAGNOSTIC.
-
- Unfortunately, unlike C11, this implementation must appear as an
- ordinary declaration, and cannot appear inside struct { ... }. */
-
-# ifdef _GL_HAVE__STATIC_ASSERT
-# define _GL_VERIFY _Static_assert
-# else
-# define _GL_VERIFY(R, DIAGNOSTIC) \
- extern int (*_GL_GENSYM (_gl_verify_function) (void)) \
- [_GL_VERIFY_TRUE (R, DIAGNOSTIC)]
-# endif
-
-/* _GL_STATIC_ASSERT_H is defined if this code is copied into assert.h. */
-# ifdef _GL_STATIC_ASSERT_H
-# if !defined _GL_HAVE__STATIC_ASSERT && !defined _Static_assert
-# define _Static_assert(R, DIAGNOSTIC) _GL_VERIFY (R, DIAGNOSTIC)
-# endif
-# if !defined _GL_HAVE_STATIC_ASSERT && !defined static_assert
-# define static_assert _Static_assert /* C11 requires this #define. */
-# endif
-# endif
-
-/* @assert.h omit start@ */
-
-/* Each of these macros verifies that its argument R is nonzero. To
- be portable, R should be an integer constant expression. Unlike
- assert (R), there is no run-time overhead.
-
- There are two macros, since no single macro can be used in all
- contexts in C. verify_true (R) is for scalar contexts, including
- integer constant expression contexts. verify (R) is for declaration
- contexts, e.g., the top level. */
-
-/* Verify requirement R at compile-time, as an integer constant expression.
- Return 1. This is equivalent to verify_expr (R, 1).
-
- verify_true is obsolescent; please use verify_expr instead. */
-
-# define verify_true(R) _GL_VERIFY_TRUE (R, "verify_true (" #R ")")
-
-/* Verify requirement R at compile-time. Return the value of the
- expression E. */
-
-# define verify_expr(R, E) \
- (_GL_VERIFY_TRUE (R, "verify_expr (" #R ", " #E ")") ? (E) : (E))
-
-/* Verify requirement R at compile-time, as a declaration without a
- trailing ';'. */
-
-# define verify(R) _GL_VERIFY (R, "verify (" #R ")")
-
-/* @assert.h omit end@ */
-
-#endif
+++ /dev/null
-/* A substitute for ISO C99 <wchar.h>, for platforms that have issues.
-
- Copyright (C) 2007-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Eric Blake. */
-
-/*
- * ISO C 99 <wchar.h> for platforms that have issues.
- * <http://www.opengroup.org/susv3xbd/wchar.h.html>
- *
- * For now, this just ensures proper prerequisite inclusion order and
- * the declaration of wcwidth().
- */
-
-#if __GNUC__ >= 3
-@PRAGMA_SYSTEM_HEADER@
-#endif
-@PRAGMA_COLUMNS@
-
-#if defined __need_mbstate_t || defined __need_wint_t || (defined __hpux && ((defined _INTTYPES_INCLUDED && !defined strtoimax) || defined _GL_JUST_INCLUDE_SYSTEM_WCHAR_H)) || defined _GL_ALREADY_INCLUDING_WCHAR_H
-/* Special invocation convention:
- - Inside glibc and uClibc header files.
- - On HP-UX 11.00 we have a sequence of nested includes
- <wchar.h> -> <stdlib.h> -> <stdint.h>, and the latter includes <wchar.h>,
- once indirectly <stdint.h> -> <sys/types.h> -> <inttypes.h> -> <wchar.h>
- and once directly. In both situations 'wint_t' is not yet defined,
- therefore we cannot provide the function overrides; instead include only
- the system's <wchar.h>.
- - On IRIX 6.5, similarly, we have an include <wchar.h> -> <wctype.h>, and
- the latter includes <wchar.h>. But here, we have no way to detect whether
- <wctype.h> is completely included or is still being included. */
-
-#@INCLUDE_NEXT@ @NEXT_WCHAR_H@
-
-#else
-/* Normal invocation convention. */
-
-#ifndef _@GUARD_PREFIX@_WCHAR_H
-
-#define _GL_ALREADY_INCLUDING_WCHAR_H
-
-#if @HAVE_FEATURES_H@
-# include <features.h> /* for __GLIBC__ */
-#endif
-
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>.
- In some builds of uClibc, <wchar.h> is nonexistent and wchar_t is defined
- by <stddef.h>.
- But avoid namespace pollution on glibc systems. */
-#if !(defined __GLIBC__ && !defined __UCLIBC__)
-# include <stddef.h>
-#endif
-#ifndef __GLIBC__
-# include <stdio.h>
-# include <time.h>
-#endif
-
-/* Include the original <wchar.h> if it exists.
- Some builds of uClibc lack it. */
-/* The include_next requires a split double-inclusion guard. */
-#if @HAVE_WCHAR_H@
-# @INCLUDE_NEXT@ @NEXT_WCHAR_H@
-#endif
-
-#undef _GL_ALREADY_INCLUDING_WCHAR_H
-
-#ifndef _@GUARD_PREFIX@_WCHAR_H
-#define _@GUARD_PREFIX@_WCHAR_H
-
-/* The __attribute__ feature is available in gcc versions 2.5 and later.
- The attribute __pure__ was added in gcc 2.96. */
-#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96)
-# define _GL_ATTRIBUTE_PURE __attribute__ ((__pure__))
-#else
-# define _GL_ATTRIBUTE_PURE /* empty */
-#endif
-
-/* The definitions of _GL_FUNCDECL_RPL etc. are copied here. */
-
-/* The definition of _GL_ARG_NONNULL is copied here. */
-
-/* The definition of _GL_WARN_ON_USE is copied here. */
-
-
-/* Define wint_t and WEOF. (Also done in wctype.in.h.) */
-#if !@HAVE_WINT_T@ && !defined wint_t
-# define wint_t int
-# ifndef WEOF
-# define WEOF -1
-# endif
-#else
-/* MSVC defines wint_t as 'unsigned short' in <crtdefs.h>.
- This is too small: ISO C 99 section 7.24.1.(2) says that wint_t must be
- "unchanged by default argument promotions". Override it. */
-# if defined _MSC_VER
-# if !GNULIB_defined_wint_t
-# include <crtdefs.h>
-typedef unsigned int rpl_wint_t;
-# undef wint_t
-# define wint_t rpl_wint_t
-# define GNULIB_defined_wint_t 1
-# endif
-# endif
-# ifndef WEOF
-# define WEOF ((wint_t) -1)
-# endif
-#endif
-
-
-/* Override mbstate_t if it is too small.
- On IRIX 6.5, sizeof (mbstate_t) == 1, which is not sufficient for
- implementing mbrtowc for encodings like UTF-8. */
-#if !(@HAVE_MBSINIT@ && @HAVE_MBRTOWC@) || @REPLACE_MBSTATE_T@
-# if !GNULIB_defined_mbstate_t
-typedef int rpl_mbstate_t;
-# undef mbstate_t
-# define mbstate_t rpl_mbstate_t
-# define GNULIB_defined_mbstate_t 1
-# endif
-#endif
-
-
-/* Convert a single-byte character to a wide character. */
-#if @GNULIB_BTOWC@
-# if @REPLACE_BTOWC@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef btowc
-# define btowc rpl_btowc
-# endif
-_GL_FUNCDECL_RPL (btowc, wint_t, (int c) _GL_ATTRIBUTE_PURE);
-_GL_CXXALIAS_RPL (btowc, wint_t, (int c));
-# else
-# if !@HAVE_BTOWC@
-_GL_FUNCDECL_SYS (btowc, wint_t, (int c) _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (btowc, wint_t, (int c));
-# endif
-_GL_CXXALIASWARN (btowc);
-#elif defined GNULIB_POSIXCHECK
-# undef btowc
-# if HAVE_RAW_DECL_BTOWC
-_GL_WARN_ON_USE (btowc, "btowc is unportable - "
- "use gnulib module btowc for portability");
-# endif
-#endif
-
-
-/* Convert a wide character to a single-byte character. */
-#if @GNULIB_WCTOB@
-# if @REPLACE_WCTOB@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef wctob
-# define wctob rpl_wctob
-# endif
-_GL_FUNCDECL_RPL (wctob, int, (wint_t wc) _GL_ATTRIBUTE_PURE);
-_GL_CXXALIAS_RPL (wctob, int, (wint_t wc));
-# else
-# if !defined wctob && !@HAVE_DECL_WCTOB@
-/* wctob is provided by gnulib, or wctob exists but is not declared. */
-_GL_FUNCDECL_SYS (wctob, int, (wint_t wc) _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wctob, int, (wint_t wc));
-# endif
-_GL_CXXALIASWARN (wctob);
-#elif defined GNULIB_POSIXCHECK
-# undef wctob
-# if HAVE_RAW_DECL_WCTOB
-_GL_WARN_ON_USE (wctob, "wctob is unportable - "
- "use gnulib module wctob for portability");
-# endif
-#endif
-
-
-/* Test whether *PS is in the initial state. */
-#if @GNULIB_MBSINIT@
-# if @REPLACE_MBSINIT@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef mbsinit
-# define mbsinit rpl_mbsinit
-# endif
-_GL_FUNCDECL_RPL (mbsinit, int, (const mbstate_t *ps));
-_GL_CXXALIAS_RPL (mbsinit, int, (const mbstate_t *ps));
-# else
-# if !@HAVE_MBSINIT@
-_GL_FUNCDECL_SYS (mbsinit, int, (const mbstate_t *ps));
-# endif
-_GL_CXXALIAS_SYS (mbsinit, int, (const mbstate_t *ps));
-# endif
-_GL_CXXALIASWARN (mbsinit);
-#elif defined GNULIB_POSIXCHECK
-# undef mbsinit
-# if HAVE_RAW_DECL_MBSINIT
-_GL_WARN_ON_USE (mbsinit, "mbsinit is unportable - "
- "use gnulib module mbsinit for portability");
-# endif
-#endif
-
-
-/* Convert a multibyte character to a wide character. */
-#if @GNULIB_MBRTOWC@
-# if @REPLACE_MBRTOWC@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef mbrtowc
-# define mbrtowc rpl_mbrtowc
-# endif
-_GL_FUNCDECL_RPL (mbrtowc, size_t,
- (wchar_t *pwc, const char *s, size_t n, mbstate_t *ps));
-_GL_CXXALIAS_RPL (mbrtowc, size_t,
- (wchar_t *pwc, const char *s, size_t n, mbstate_t *ps));
-# else
-# if !@HAVE_MBRTOWC@
-_GL_FUNCDECL_SYS (mbrtowc, size_t,
- (wchar_t *pwc, const char *s, size_t n, mbstate_t *ps));
-# endif
-_GL_CXXALIAS_SYS (mbrtowc, size_t,
- (wchar_t *pwc, const char *s, size_t n, mbstate_t *ps));
-# endif
-_GL_CXXALIASWARN (mbrtowc);
-#elif defined GNULIB_POSIXCHECK
-# undef mbrtowc
-# if HAVE_RAW_DECL_MBRTOWC
-_GL_WARN_ON_USE (mbrtowc, "mbrtowc is unportable - "
- "use gnulib module mbrtowc for portability");
-# endif
-#endif
-
-
-/* Recognize a multibyte character. */
-#if @GNULIB_MBRLEN@
-# if @REPLACE_MBRLEN@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef mbrlen
-# define mbrlen rpl_mbrlen
-# endif
-_GL_FUNCDECL_RPL (mbrlen, size_t, (const char *s, size_t n, mbstate_t *ps));
-_GL_CXXALIAS_RPL (mbrlen, size_t, (const char *s, size_t n, mbstate_t *ps));
-# else
-# if !@HAVE_MBRLEN@
-_GL_FUNCDECL_SYS (mbrlen, size_t, (const char *s, size_t n, mbstate_t *ps));
-# endif
-_GL_CXXALIAS_SYS (mbrlen, size_t, (const char *s, size_t n, mbstate_t *ps));
-# endif
-_GL_CXXALIASWARN (mbrlen);
-#elif defined GNULIB_POSIXCHECK
-# undef mbrlen
-# if HAVE_RAW_DECL_MBRLEN
-_GL_WARN_ON_USE (mbrlen, "mbrlen is unportable - "
- "use gnulib module mbrlen for portability");
-# endif
-#endif
-
-
-/* Convert a string to a wide string. */
-#if @GNULIB_MBSRTOWCS@
-# if @REPLACE_MBSRTOWCS@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef mbsrtowcs
-# define mbsrtowcs rpl_mbsrtowcs
-# endif
-_GL_FUNCDECL_RPL (mbsrtowcs, size_t,
- (wchar_t *dest, const char **srcp, size_t len, mbstate_t *ps)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (mbsrtowcs, size_t,
- (wchar_t *dest, const char **srcp, size_t len,
- mbstate_t *ps));
-# else
-# if !@HAVE_MBSRTOWCS@
-_GL_FUNCDECL_SYS (mbsrtowcs, size_t,
- (wchar_t *dest, const char **srcp, size_t len, mbstate_t *ps)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (mbsrtowcs, size_t,
- (wchar_t *dest, const char **srcp, size_t len,
- mbstate_t *ps));
-# endif
-_GL_CXXALIASWARN (mbsrtowcs);
-#elif defined GNULIB_POSIXCHECK
-# undef mbsrtowcs
-# if HAVE_RAW_DECL_MBSRTOWCS
-_GL_WARN_ON_USE (mbsrtowcs, "mbsrtowcs is unportable - "
- "use gnulib module mbsrtowcs for portability");
-# endif
-#endif
-
-
-/* Convert a string to a wide string. */
-#if @GNULIB_MBSNRTOWCS@
-# if @REPLACE_MBSNRTOWCS@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef mbsnrtowcs
-# define mbsnrtowcs rpl_mbsnrtowcs
-# endif
-_GL_FUNCDECL_RPL (mbsnrtowcs, size_t,
- (wchar_t *dest, const char **srcp, size_t srclen, size_t len,
- mbstate_t *ps)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (mbsnrtowcs, size_t,
- (wchar_t *dest, const char **srcp, size_t srclen, size_t len,
- mbstate_t *ps));
-# else
-# if !@HAVE_MBSNRTOWCS@
-_GL_FUNCDECL_SYS (mbsnrtowcs, size_t,
- (wchar_t *dest, const char **srcp, size_t srclen, size_t len,
- mbstate_t *ps)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (mbsnrtowcs, size_t,
- (wchar_t *dest, const char **srcp, size_t srclen, size_t len,
- mbstate_t *ps));
-# endif
-_GL_CXXALIASWARN (mbsnrtowcs);
-#elif defined GNULIB_POSIXCHECK
-# undef mbsnrtowcs
-# if HAVE_RAW_DECL_MBSNRTOWCS
-_GL_WARN_ON_USE (mbsnrtowcs, "mbsnrtowcs is unportable - "
- "use gnulib module mbsnrtowcs for portability");
-# endif
-#endif
-
-
-/* Convert a wide character to a multibyte character. */
-#if @GNULIB_WCRTOMB@
-# if @REPLACE_WCRTOMB@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef wcrtomb
-# define wcrtomb rpl_wcrtomb
-# endif
-_GL_FUNCDECL_RPL (wcrtomb, size_t, (char *s, wchar_t wc, mbstate_t *ps));
-_GL_CXXALIAS_RPL (wcrtomb, size_t, (char *s, wchar_t wc, mbstate_t *ps));
-# else
-# if !@HAVE_WCRTOMB@
-_GL_FUNCDECL_SYS (wcrtomb, size_t, (char *s, wchar_t wc, mbstate_t *ps));
-# endif
-_GL_CXXALIAS_SYS (wcrtomb, size_t, (char *s, wchar_t wc, mbstate_t *ps));
-# endif
-_GL_CXXALIASWARN (wcrtomb);
-#elif defined GNULIB_POSIXCHECK
-# undef wcrtomb
-# if HAVE_RAW_DECL_WCRTOMB
-_GL_WARN_ON_USE (wcrtomb, "wcrtomb is unportable - "
- "use gnulib module wcrtomb for portability");
-# endif
-#endif
-
-
-/* Convert a wide string to a string. */
-#if @GNULIB_WCSRTOMBS@
-# if @REPLACE_WCSRTOMBS@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef wcsrtombs
-# define wcsrtombs rpl_wcsrtombs
-# endif
-_GL_FUNCDECL_RPL (wcsrtombs, size_t,
- (char *dest, const wchar_t **srcp, size_t len, mbstate_t *ps)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (wcsrtombs, size_t,
- (char *dest, const wchar_t **srcp, size_t len,
- mbstate_t *ps));
-# else
-# if !@HAVE_WCSRTOMBS@
-_GL_FUNCDECL_SYS (wcsrtombs, size_t,
- (char *dest, const wchar_t **srcp, size_t len, mbstate_t *ps)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (wcsrtombs, size_t,
- (char *dest, const wchar_t **srcp, size_t len,
- mbstate_t *ps));
-# endif
-_GL_CXXALIASWARN (wcsrtombs);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsrtombs
-# if HAVE_RAW_DECL_WCSRTOMBS
-_GL_WARN_ON_USE (wcsrtombs, "wcsrtombs is unportable - "
- "use gnulib module wcsrtombs for portability");
-# endif
-#endif
-
-
-/* Convert a wide string to a string. */
-#if @GNULIB_WCSNRTOMBS@
-# if @REPLACE_WCSNRTOMBS@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef wcsnrtombs
-# define wcsnrtombs rpl_wcsnrtombs
-# endif
-_GL_FUNCDECL_RPL (wcsnrtombs, size_t,
- (char *dest, const wchar_t **srcp, size_t srclen, size_t len,
- mbstate_t *ps)
- _GL_ARG_NONNULL ((2)));
-_GL_CXXALIAS_RPL (wcsnrtombs, size_t,
- (char *dest, const wchar_t **srcp, size_t srclen, size_t len,
- mbstate_t *ps));
-# else
-# if !@HAVE_WCSNRTOMBS@
-_GL_FUNCDECL_SYS (wcsnrtombs, size_t,
- (char *dest, const wchar_t **srcp, size_t srclen, size_t len,
- mbstate_t *ps)
- _GL_ARG_NONNULL ((2)));
-# endif
-_GL_CXXALIAS_SYS (wcsnrtombs, size_t,
- (char *dest, const wchar_t **srcp, size_t srclen, size_t len,
- mbstate_t *ps));
-# endif
-_GL_CXXALIASWARN (wcsnrtombs);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsnrtombs
-# if HAVE_RAW_DECL_WCSNRTOMBS
-_GL_WARN_ON_USE (wcsnrtombs, "wcsnrtombs is unportable - "
- "use gnulib module wcsnrtombs for portability");
-# endif
-#endif
-
-
-/* Return the number of screen columns needed for WC. */
-#if @GNULIB_WCWIDTH@
-# if @REPLACE_WCWIDTH@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef wcwidth
-# define wcwidth rpl_wcwidth
-# endif
-_GL_FUNCDECL_RPL (wcwidth, int, (wchar_t) _GL_ATTRIBUTE_PURE);
-_GL_CXXALIAS_RPL (wcwidth, int, (wchar_t));
-# else
-# if !@HAVE_DECL_WCWIDTH@
-/* wcwidth exists but is not declared. */
-_GL_FUNCDECL_SYS (wcwidth, int, (wchar_t) _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcwidth, int, (wchar_t));
-# endif
-_GL_CXXALIASWARN (wcwidth);
-#elif defined GNULIB_POSIXCHECK
-# undef wcwidth
-# if HAVE_RAW_DECL_WCWIDTH
-_GL_WARN_ON_USE (wcwidth, "wcwidth is unportable - "
- "use gnulib module wcwidth for portability");
-# endif
-#endif
-
-
-/* Search N wide characters of S for C. */
-#if @GNULIB_WMEMCHR@
-# if !@HAVE_WMEMCHR@
-_GL_FUNCDECL_SYS (wmemchr, wchar_t *, (const wchar_t *s, wchar_t c, size_t n)
- _GL_ATTRIBUTE_PURE);
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" {
- const wchar_t * std::wmemchr (const wchar_t *, wchar_t, size_t);
- wchar_t * std::wmemchr (wchar_t *, wchar_t, size_t);
- } */
-_GL_CXXALIAS_SYS_CAST2 (wmemchr,
- wchar_t *, (const wchar_t *, wchar_t, size_t),
- const wchar_t *, (const wchar_t *, wchar_t, size_t));
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (wmemchr, wchar_t *, (wchar_t *s, wchar_t c, size_t n));
-_GL_CXXALIASWARN1 (wmemchr, const wchar_t *,
- (const wchar_t *s, wchar_t c, size_t n));
-# else
-_GL_CXXALIASWARN (wmemchr);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef wmemchr
-# if HAVE_RAW_DECL_WMEMCHR
-_GL_WARN_ON_USE (wmemchr, "wmemchr is unportable - "
- "use gnulib module wmemchr for portability");
-# endif
-#endif
-
-
-/* Compare N wide characters of S1 and S2. */
-#if @GNULIB_WMEMCMP@
-# if !@HAVE_WMEMCMP@
-_GL_FUNCDECL_SYS (wmemcmp, int,
- (const wchar_t *s1, const wchar_t *s2, size_t n)
- _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wmemcmp, int,
- (const wchar_t *s1, const wchar_t *s2, size_t n));
-_GL_CXXALIASWARN (wmemcmp);
-#elif defined GNULIB_POSIXCHECK
-# undef wmemcmp
-# if HAVE_RAW_DECL_WMEMCMP
-_GL_WARN_ON_USE (wmemcmp, "wmemcmp is unportable - "
- "use gnulib module wmemcmp for portability");
-# endif
-#endif
-
-
-/* Copy N wide characters of SRC to DEST. */
-#if @GNULIB_WMEMCPY@
-# if !@HAVE_WMEMCPY@
-_GL_FUNCDECL_SYS (wmemcpy, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-# endif
-_GL_CXXALIAS_SYS (wmemcpy, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-_GL_CXXALIASWARN (wmemcpy);
-#elif defined GNULIB_POSIXCHECK
-# undef wmemcpy
-# if HAVE_RAW_DECL_WMEMCPY
-_GL_WARN_ON_USE (wmemcpy, "wmemcpy is unportable - "
- "use gnulib module wmemcpy for portability");
-# endif
-#endif
-
-
-/* Copy N wide characters of SRC to DEST, guaranteeing correct behavior for
- overlapping memory areas. */
-#if @GNULIB_WMEMMOVE@
-# if !@HAVE_WMEMMOVE@
-_GL_FUNCDECL_SYS (wmemmove, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-# endif
-_GL_CXXALIAS_SYS (wmemmove, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-_GL_CXXALIASWARN (wmemmove);
-#elif defined GNULIB_POSIXCHECK
-# undef wmemmove
-# if HAVE_RAW_DECL_WMEMMOVE
-_GL_WARN_ON_USE (wmemmove, "wmemmove is unportable - "
- "use gnulib module wmemmove for portability");
-# endif
-#endif
-
-
-/* Set N wide characters of S to C. */
-#if @GNULIB_WMEMSET@
-# if !@HAVE_WMEMSET@
-_GL_FUNCDECL_SYS (wmemset, wchar_t *, (wchar_t *s, wchar_t c, size_t n));
-# endif
-_GL_CXXALIAS_SYS (wmemset, wchar_t *, (wchar_t *s, wchar_t c, size_t n));
-_GL_CXXALIASWARN (wmemset);
-#elif defined GNULIB_POSIXCHECK
-# undef wmemset
-# if HAVE_RAW_DECL_WMEMSET
-_GL_WARN_ON_USE (wmemset, "wmemset is unportable - "
- "use gnulib module wmemset for portability");
-# endif
-#endif
-
-
-/* Return the number of wide characters in S. */
-#if @GNULIB_WCSLEN@
-# if !@HAVE_WCSLEN@
-_GL_FUNCDECL_SYS (wcslen, size_t, (const wchar_t *s) _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcslen, size_t, (const wchar_t *s));
-_GL_CXXALIASWARN (wcslen);
-#elif defined GNULIB_POSIXCHECK
-# undef wcslen
-# if HAVE_RAW_DECL_WCSLEN
-_GL_WARN_ON_USE (wcslen, "wcslen is unportable - "
- "use gnulib module wcslen for portability");
-# endif
-#endif
-
-
-/* Return the number of wide characters in S, but at most MAXLEN. */
-#if @GNULIB_WCSNLEN@
-# if !@HAVE_WCSNLEN@
-_GL_FUNCDECL_SYS (wcsnlen, size_t, (const wchar_t *s, size_t maxlen)
- _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcsnlen, size_t, (const wchar_t *s, size_t maxlen));
-_GL_CXXALIASWARN (wcsnlen);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsnlen
-# if HAVE_RAW_DECL_WCSNLEN
-_GL_WARN_ON_USE (wcsnlen, "wcsnlen is unportable - "
- "use gnulib module wcsnlen for portability");
-# endif
-#endif
-
-
-/* Copy SRC to DEST. */
-#if @GNULIB_WCSCPY@
-# if !@HAVE_WCSCPY@
-_GL_FUNCDECL_SYS (wcscpy, wchar_t *, (wchar_t *dest, const wchar_t *src));
-# endif
-_GL_CXXALIAS_SYS (wcscpy, wchar_t *, (wchar_t *dest, const wchar_t *src));
-_GL_CXXALIASWARN (wcscpy);
-#elif defined GNULIB_POSIXCHECK
-# undef wcscpy
-# if HAVE_RAW_DECL_WCSCPY
-_GL_WARN_ON_USE (wcscpy, "wcscpy is unportable - "
- "use gnulib module wcscpy for portability");
-# endif
-#endif
-
-
-/* Copy SRC to DEST, returning the address of the terminating L'\0' in DEST. */
-#if @GNULIB_WCPCPY@
-# if !@HAVE_WCPCPY@
-_GL_FUNCDECL_SYS (wcpcpy, wchar_t *, (wchar_t *dest, const wchar_t *src));
-# endif
-_GL_CXXALIAS_SYS (wcpcpy, wchar_t *, (wchar_t *dest, const wchar_t *src));
-_GL_CXXALIASWARN (wcpcpy);
-#elif defined GNULIB_POSIXCHECK
-# undef wcpcpy
-# if HAVE_RAW_DECL_WCPCPY
-_GL_WARN_ON_USE (wcpcpy, "wcpcpy is unportable - "
- "use gnulib module wcpcpy for portability");
-# endif
-#endif
-
-
-/* Copy no more than N wide characters of SRC to DEST. */
-#if @GNULIB_WCSNCPY@
-# if !@HAVE_WCSNCPY@
-_GL_FUNCDECL_SYS (wcsncpy, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-# endif
-_GL_CXXALIAS_SYS (wcsncpy, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-_GL_CXXALIASWARN (wcsncpy);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsncpy
-# if HAVE_RAW_DECL_WCSNCPY
-_GL_WARN_ON_USE (wcsncpy, "wcsncpy is unportable - "
- "use gnulib module wcsncpy for portability");
-# endif
-#endif
-
-
-/* Copy no more than N characters of SRC to DEST, returning the address of
- the last character written into DEST. */
-#if @GNULIB_WCPNCPY@
-# if !@HAVE_WCPNCPY@
-_GL_FUNCDECL_SYS (wcpncpy, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-# endif
-_GL_CXXALIAS_SYS (wcpncpy, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-_GL_CXXALIASWARN (wcpncpy);
-#elif defined GNULIB_POSIXCHECK
-# undef wcpncpy
-# if HAVE_RAW_DECL_WCPNCPY
-_GL_WARN_ON_USE (wcpncpy, "wcpncpy is unportable - "
- "use gnulib module wcpncpy for portability");
-# endif
-#endif
-
-
-/* Append SRC onto DEST. */
-#if @GNULIB_WCSCAT@
-# if !@HAVE_WCSCAT@
-_GL_FUNCDECL_SYS (wcscat, wchar_t *, (wchar_t *dest, const wchar_t *src));
-# endif
-_GL_CXXALIAS_SYS (wcscat, wchar_t *, (wchar_t *dest, const wchar_t *src));
-_GL_CXXALIASWARN (wcscat);
-#elif defined GNULIB_POSIXCHECK
-# undef wcscat
-# if HAVE_RAW_DECL_WCSCAT
-_GL_WARN_ON_USE (wcscat, "wcscat is unportable - "
- "use gnulib module wcscat for portability");
-# endif
-#endif
-
-
-/* Append no more than N wide characters of SRC onto DEST. */
-#if @GNULIB_WCSNCAT@
-# if !@HAVE_WCSNCAT@
-_GL_FUNCDECL_SYS (wcsncat, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-# endif
-_GL_CXXALIAS_SYS (wcsncat, wchar_t *,
- (wchar_t *dest, const wchar_t *src, size_t n));
-_GL_CXXALIASWARN (wcsncat);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsncat
-# if HAVE_RAW_DECL_WCSNCAT
-_GL_WARN_ON_USE (wcsncat, "wcsncat is unportable - "
- "use gnulib module wcsncat for portability");
-# endif
-#endif
-
-
-/* Compare S1 and S2. */
-#if @GNULIB_WCSCMP@
-# if !@HAVE_WCSCMP@
-_GL_FUNCDECL_SYS (wcscmp, int, (const wchar_t *s1, const wchar_t *s2)
- _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcscmp, int, (const wchar_t *s1, const wchar_t *s2));
-_GL_CXXALIASWARN (wcscmp);
-#elif defined GNULIB_POSIXCHECK
-# undef wcscmp
-# if HAVE_RAW_DECL_WCSCMP
-_GL_WARN_ON_USE (wcscmp, "wcscmp is unportable - "
- "use gnulib module wcscmp for portability");
-# endif
-#endif
-
-
-/* Compare no more than N wide characters of S1 and S2. */
-#if @GNULIB_WCSNCMP@
-# if !@HAVE_WCSNCMP@
-_GL_FUNCDECL_SYS (wcsncmp, int,
- (const wchar_t *s1, const wchar_t *s2, size_t n)
- _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcsncmp, int,
- (const wchar_t *s1, const wchar_t *s2, size_t n));
-_GL_CXXALIASWARN (wcsncmp);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsncmp
-# if HAVE_RAW_DECL_WCSNCMP
-_GL_WARN_ON_USE (wcsncmp, "wcsncmp is unportable - "
- "use gnulib module wcsncmp for portability");
-# endif
-#endif
-
-
-/* Compare S1 and S2, ignoring case. */
-#if @GNULIB_WCSCASECMP@
-# if !@HAVE_WCSCASECMP@
-_GL_FUNCDECL_SYS (wcscasecmp, int, (const wchar_t *s1, const wchar_t *s2)
- _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcscasecmp, int, (const wchar_t *s1, const wchar_t *s2));
-_GL_CXXALIASWARN (wcscasecmp);
-#elif defined GNULIB_POSIXCHECK
-# undef wcscasecmp
-# if HAVE_RAW_DECL_WCSCASECMP
-_GL_WARN_ON_USE (wcscasecmp, "wcscasecmp is unportable - "
- "use gnulib module wcscasecmp for portability");
-# endif
-#endif
-
-
-/* Compare no more than N chars of S1 and S2, ignoring case. */
-#if @GNULIB_WCSNCASECMP@
-# if !@HAVE_WCSNCASECMP@
-_GL_FUNCDECL_SYS (wcsncasecmp, int,
- (const wchar_t *s1, const wchar_t *s2, size_t n)
- _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcsncasecmp, int,
- (const wchar_t *s1, const wchar_t *s2, size_t n));
-_GL_CXXALIASWARN (wcsncasecmp);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsncasecmp
-# if HAVE_RAW_DECL_WCSNCASECMP
-_GL_WARN_ON_USE (wcsncasecmp, "wcsncasecmp is unportable - "
- "use gnulib module wcsncasecmp for portability");
-# endif
-#endif
-
-
-/* Compare S1 and S2, both interpreted as appropriate to the LC_COLLATE
- category of the current locale. */
-#if @GNULIB_WCSCOLL@
-# if !@HAVE_WCSCOLL@
-_GL_FUNCDECL_SYS (wcscoll, int, (const wchar_t *s1, const wchar_t *s2));
-# endif
-_GL_CXXALIAS_SYS (wcscoll, int, (const wchar_t *s1, const wchar_t *s2));
-_GL_CXXALIASWARN (wcscoll);
-#elif defined GNULIB_POSIXCHECK
-# undef wcscoll
-# if HAVE_RAW_DECL_WCSCOLL
-_GL_WARN_ON_USE (wcscoll, "wcscoll is unportable - "
- "use gnulib module wcscoll for portability");
-# endif
-#endif
-
-
-/* Transform S2 into array pointed to by S1 such that if wcscmp is applied
- to two transformed strings the result is the as applying 'wcscoll' to the
- original strings. */
-#if @GNULIB_WCSXFRM@
-# if !@HAVE_WCSXFRM@
-_GL_FUNCDECL_SYS (wcsxfrm, size_t, (wchar_t *s1, const wchar_t *s2, size_t n));
-# endif
-_GL_CXXALIAS_SYS (wcsxfrm, size_t, (wchar_t *s1, const wchar_t *s2, size_t n));
-_GL_CXXALIASWARN (wcsxfrm);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsxfrm
-# if HAVE_RAW_DECL_WCSXFRM
-_GL_WARN_ON_USE (wcsxfrm, "wcsxfrm is unportable - "
- "use gnulib module wcsxfrm for portability");
-# endif
-#endif
-
-
-/* Duplicate S, returning an identical malloc'd string. */
-#if @GNULIB_WCSDUP@
-# if !@HAVE_WCSDUP@
-_GL_FUNCDECL_SYS (wcsdup, wchar_t *, (const wchar_t *s));
-# endif
-_GL_CXXALIAS_SYS (wcsdup, wchar_t *, (const wchar_t *s));
-_GL_CXXALIASWARN (wcsdup);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsdup
-# if HAVE_RAW_DECL_WCSDUP
-_GL_WARN_ON_USE (wcsdup, "wcsdup is unportable - "
- "use gnulib module wcsdup for portability");
-# endif
-#endif
-
-
-/* Find the first occurrence of WC in WCS. */
-#if @GNULIB_WCSCHR@
-# if !@HAVE_WCSCHR@
-_GL_FUNCDECL_SYS (wcschr, wchar_t *, (const wchar_t *wcs, wchar_t wc)
- _GL_ATTRIBUTE_PURE);
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" {
- const wchar_t * std::wcschr (const wchar_t *, wchar_t);
- wchar_t * std::wcschr (wchar_t *, wchar_t);
- } */
-_GL_CXXALIAS_SYS_CAST2 (wcschr,
- wchar_t *, (const wchar_t *, wchar_t),
- const wchar_t *, (const wchar_t *, wchar_t));
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (wcschr, wchar_t *, (wchar_t *wcs, wchar_t wc));
-_GL_CXXALIASWARN1 (wcschr, const wchar_t *, (const wchar_t *wcs, wchar_t wc));
-# else
-_GL_CXXALIASWARN (wcschr);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef wcschr
-# if HAVE_RAW_DECL_WCSCHR
-_GL_WARN_ON_USE (wcschr, "wcschr is unportable - "
- "use gnulib module wcschr for portability");
-# endif
-#endif
-
-
-/* Find the last occurrence of WC in WCS. */
-#if @GNULIB_WCSRCHR@
-# if !@HAVE_WCSRCHR@
-_GL_FUNCDECL_SYS (wcsrchr, wchar_t *, (const wchar_t *wcs, wchar_t wc)
- _GL_ATTRIBUTE_PURE);
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" {
- const wchar_t * std::wcsrchr (const wchar_t *, wchar_t);
- wchar_t * std::wcsrchr (wchar_t *, wchar_t);
- } */
-_GL_CXXALIAS_SYS_CAST2 (wcsrchr,
- wchar_t *, (const wchar_t *, wchar_t),
- const wchar_t *, (const wchar_t *, wchar_t));
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (wcsrchr, wchar_t *, (wchar_t *wcs, wchar_t wc));
-_GL_CXXALIASWARN1 (wcsrchr, const wchar_t *, (const wchar_t *wcs, wchar_t wc));
-# else
-_GL_CXXALIASWARN (wcsrchr);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef wcsrchr
-# if HAVE_RAW_DECL_WCSRCHR
-_GL_WARN_ON_USE (wcsrchr, "wcsrchr is unportable - "
- "use gnulib module wcsrchr for portability");
-# endif
-#endif
-
-
-/* Return the length of the initial segmet of WCS which consists entirely
- of wide characters not in REJECT. */
-#if @GNULIB_WCSCSPN@
-# if !@HAVE_WCSCSPN@
-_GL_FUNCDECL_SYS (wcscspn, size_t, (const wchar_t *wcs, const wchar_t *reject)
- _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcscspn, size_t, (const wchar_t *wcs, const wchar_t *reject));
-_GL_CXXALIASWARN (wcscspn);
-#elif defined GNULIB_POSIXCHECK
-# undef wcscspn
-# if HAVE_RAW_DECL_WCSCSPN
-_GL_WARN_ON_USE (wcscspn, "wcscspn is unportable - "
- "use gnulib module wcscspn for portability");
-# endif
-#endif
-
-
-/* Return the length of the initial segmet of WCS which consists entirely
- of wide characters in ACCEPT. */
-#if @GNULIB_WCSSPN@
-# if !@HAVE_WCSSPN@
-_GL_FUNCDECL_SYS (wcsspn, size_t, (const wchar_t *wcs, const wchar_t *accept)
- _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcsspn, size_t, (const wchar_t *wcs, const wchar_t *accept));
-_GL_CXXALIASWARN (wcsspn);
-#elif defined GNULIB_POSIXCHECK
-# undef wcsspn
-# if HAVE_RAW_DECL_WCSSPN
-_GL_WARN_ON_USE (wcsspn, "wcsspn is unportable - "
- "use gnulib module wcsspn for portability");
-# endif
-#endif
-
-
-/* Find the first occurrence in WCS of any character in ACCEPT. */
-#if @GNULIB_WCSPBRK@
-# if !@HAVE_WCSPBRK@
-_GL_FUNCDECL_SYS (wcspbrk, wchar_t *,
- (const wchar_t *wcs, const wchar_t *accept)
- _GL_ATTRIBUTE_PURE);
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" {
- const wchar_t * std::wcspbrk (const wchar_t *, const wchar_t *);
- wchar_t * std::wcspbrk (wchar_t *, const wchar_t *);
- } */
-_GL_CXXALIAS_SYS_CAST2 (wcspbrk,
- wchar_t *, (const wchar_t *, const wchar_t *),
- const wchar_t *, (const wchar_t *, const wchar_t *));
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (wcspbrk, wchar_t *,
- (wchar_t *wcs, const wchar_t *accept));
-_GL_CXXALIASWARN1 (wcspbrk, const wchar_t *,
- (const wchar_t *wcs, const wchar_t *accept));
-# else
-_GL_CXXALIASWARN (wcspbrk);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef wcspbrk
-# if HAVE_RAW_DECL_WCSPBRK
-_GL_WARN_ON_USE (wcspbrk, "wcspbrk is unportable - "
- "use gnulib module wcspbrk for portability");
-# endif
-#endif
-
-
-/* Find the first occurrence of NEEDLE in HAYSTACK. */
-#if @GNULIB_WCSSTR@
-# if !@HAVE_WCSSTR@
-_GL_FUNCDECL_SYS (wcsstr, wchar_t *,
- (const wchar_t *haystack, const wchar_t *needle)
- _GL_ATTRIBUTE_PURE);
-# endif
- /* On some systems, this function is defined as an overloaded function:
- extern "C++" {
- const wchar_t * std::wcsstr (const wchar_t *, const wchar_t *);
- wchar_t * std::wcsstr (wchar_t *, const wchar_t *);
- } */
-_GL_CXXALIAS_SYS_CAST2 (wcsstr,
- wchar_t *, (const wchar_t *, const wchar_t *),
- const wchar_t *, (const wchar_t *, const wchar_t *));
-# if ((__GLIBC__ == 2 && __GLIBC_MINOR__ >= 10) && !defined __UCLIBC__) \
- && (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 4))
-_GL_CXXALIASWARN1 (wcsstr, wchar_t *,
- (wchar_t *haystack, const wchar_t *needle));
-_GL_CXXALIASWARN1 (wcsstr, const wchar_t *,
- (const wchar_t *haystack, const wchar_t *needle));
-# else
-_GL_CXXALIASWARN (wcsstr);
-# endif
-#elif defined GNULIB_POSIXCHECK
-# undef wcsstr
-# if HAVE_RAW_DECL_WCSSTR
-_GL_WARN_ON_USE (wcsstr, "wcsstr is unportable - "
- "use gnulib module wcsstr for portability");
-# endif
-#endif
-
-
-/* Divide WCS into tokens separated by characters in DELIM. */
-#if @GNULIB_WCSTOK@
-# if !@HAVE_WCSTOK@
-_GL_FUNCDECL_SYS (wcstok, wchar_t *,
- (wchar_t *wcs, const wchar_t *delim, wchar_t **ptr));
-# endif
-_GL_CXXALIAS_SYS (wcstok, wchar_t *,
- (wchar_t *wcs, const wchar_t *delim, wchar_t **ptr));
-_GL_CXXALIASWARN (wcstok);
-#elif defined GNULIB_POSIXCHECK
-# undef wcstok
-# if HAVE_RAW_DECL_WCSTOK
-_GL_WARN_ON_USE (wcstok, "wcstok is unportable - "
- "use gnulib module wcstok for portability");
-# endif
-#endif
-
-
-/* Determine number of column positions required for first N wide
- characters (or fewer if S ends before this) in S. */
-#if @GNULIB_WCSWIDTH@
-# if @REPLACE_WCSWIDTH@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# undef wcswidth
-# define wcswidth rpl_wcswidth
-# endif
-_GL_FUNCDECL_RPL (wcswidth, int, (const wchar_t *s, size_t n)
- _GL_ATTRIBUTE_PURE);
-_GL_CXXALIAS_RPL (wcswidth, int, (const wchar_t *s, size_t n));
-# else
-# if !@HAVE_WCSWIDTH@
-_GL_FUNCDECL_SYS (wcswidth, int, (const wchar_t *s, size_t n)
- _GL_ATTRIBUTE_PURE);
-# endif
-_GL_CXXALIAS_SYS (wcswidth, int, (const wchar_t *s, size_t n));
-# endif
-_GL_CXXALIASWARN (wcswidth);
-#elif defined GNULIB_POSIXCHECK
-# undef wcswidth
-# if HAVE_RAW_DECL_WCSWIDTH
-_GL_WARN_ON_USE (wcswidth, "wcswidth is unportable - "
- "use gnulib module wcswidth for portability");
-# endif
-#endif
-
-
-#endif /* _@GUARD_PREFIX@_WCHAR_H */
-#endif /* _@GUARD_PREFIX@_WCHAR_H */
-#endif
+++ /dev/null
-/* A substitute for ISO C99 <wctype.h>, for platforms that lack it.
-
- Copyright (C) 2006-2012 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, see <http://www.gnu.org/licenses/>. */
-
-/* Written by Bruno Haible and Paul Eggert. */
-
-/*
- * ISO C 99 <wctype.h> for platforms that lack it.
- * <http://www.opengroup.org/susv3xbd/wctype.h.html>
- *
- * iswctype, towctrans, towlower, towupper, wctrans, wctype,
- * wctrans_t, and wctype_t are not yet implemented.
- */
-
-#ifndef _@GUARD_PREFIX@_WCTYPE_H
-
-#if __GNUC__ >= 3
-@PRAGMA_SYSTEM_HEADER@
-#endif
-@PRAGMA_COLUMNS@
-
-#if @HAVE_WINT_T@
-/* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>.
- Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-# include <stddef.h>
-# include <stdio.h>
-# include <time.h>
-# include <wchar.h>
-#endif
-
-/* Include the original <wctype.h> if it exists.
- BeOS 5 has the functions but no <wctype.h>. */
-/* The include_next requires a split double-inclusion guard. */
-#if @HAVE_WCTYPE_H@
-# @INCLUDE_NEXT@ @NEXT_WCTYPE_H@
-#endif
-
-#ifndef _@GUARD_PREFIX@_WCTYPE_H
-#define _@GUARD_PREFIX@_WCTYPE_H
-
-/* The definitions of _GL_FUNCDECL_RPL etc. are copied here. */
-
-/* The definition of _GL_WARN_ON_USE is copied here. */
-
-/* Solaris 2.6 <wctype.h> includes <widec.h> which includes <euc.h> which
- #defines a number of identifiers in the application namespace. Revert
- these #defines. */
-#ifdef __sun
-# undef multibyte
-# undef eucw1
-# undef eucw2
-# undef eucw3
-# undef scrw1
-# undef scrw2
-# undef scrw3
-#endif
-
-/* Define wint_t and WEOF. (Also done in wchar.in.h.) */
-#if !@HAVE_WINT_T@ && !defined wint_t
-# define wint_t int
-# ifndef WEOF
-# define WEOF -1
-# endif
-#else
-/* MSVC defines wint_t as 'unsigned short' in <crtdefs.h>.
- This is too small: ISO C 99 section 7.24.1.(2) says that wint_t must be
- "unchanged by default argument promotions". Override it. */
-# if defined _MSC_VER
-# if !GNULIB_defined_wint_t
-# include <crtdefs.h>
-typedef unsigned int rpl_wint_t;
-# undef wint_t
-# define wint_t rpl_wint_t
-# define GNULIB_defined_wint_t 1
-# endif
-# endif
-# ifndef WEOF
-# define WEOF ((wint_t) -1)
-# endif
-#endif
-
-
-#if !GNULIB_defined_wctype_functions
-
-/* FreeBSD 4.4 to 4.11 has <wctype.h> but lacks the functions.
- Linux libc5 has <wctype.h> and the functions but they are broken.
- Assume all 11 functions (all isw* except iswblank) are implemented the
- same way, or not at all. */
-# if ! @HAVE_ISWCNTRL@ || @REPLACE_ISWCNTRL@
-
-/* IRIX 5.3 has macros but no functions, its isw* macros refer to an
- undefined variable _ctmp_ and to <ctype.h> macros like _P, and they
- refer to system functions like _iswctype that are not in the
- standard C library. Rather than try to get ancient buggy
- implementations like this to work, just disable them. */
-# undef iswalnum
-# undef iswalpha
-# undef iswblank
-# undef iswcntrl
-# undef iswdigit
-# undef iswgraph
-# undef iswlower
-# undef iswprint
-# undef iswpunct
-# undef iswspace
-# undef iswupper
-# undef iswxdigit
-# undef towlower
-# undef towupper
-
-/* Linux libc5 has <wctype.h> and the functions but they are broken. */
-# if @REPLACE_ISWCNTRL@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define iswalnum rpl_iswalnum
-# define iswalpha rpl_iswalpha
-# define iswblank rpl_iswblank
-# define iswcntrl rpl_iswcntrl
-# define iswdigit rpl_iswdigit
-# define iswgraph rpl_iswgraph
-# define iswlower rpl_iswlower
-# define iswprint rpl_iswprint
-# define iswpunct rpl_iswpunct
-# define iswspace rpl_iswspace
-# define iswupper rpl_iswupper
-# define iswxdigit rpl_iswxdigit
-# endif
-# endif
-# if @REPLACE_TOWLOWER@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define towlower rpl_towlower
-# define towupper rpl_towupper
-# endif
-# endif
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswalnum
-# else
-iswalnum
-# endif
- (wint_t wc)
-{
- return ((wc >= '0' && wc <= '9')
- || ((wc & ~0x20) >= 'A' && (wc & ~0x20) <= 'Z'));
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswalpha
-# else
-iswalpha
-# endif
- (wint_t wc)
-{
- return (wc & ~0x20) >= 'A' && (wc & ~0x20) <= 'Z';
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswblank
-# else
-iswblank
-# endif
- (wint_t wc)
-{
- return wc == ' ' || wc == '\t';
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswcntrl
-# else
-iswcntrl
-# endif
- (wint_t wc)
-{
- return (wc & ~0x1f) == 0 || wc == 0x7f;
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswdigit
-# else
-iswdigit
-# endif
- (wint_t wc)
-{
- return wc >= '0' && wc <= '9';
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswgraph
-# else
-iswgraph
-# endif
- (wint_t wc)
-{
- return wc >= '!' && wc <= '~';
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswlower
-# else
-iswlower
-# endif
- (wint_t wc)
-{
- return wc >= 'a' && wc <= 'z';
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswprint
-# else
-iswprint
-# endif
- (wint_t wc)
-{
- return wc >= ' ' && wc <= '~';
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswpunct
-# else
-iswpunct
-# endif
- (wint_t wc)
-{
- return (wc >= '!' && wc <= '~'
- && !((wc >= '0' && wc <= '9')
- || ((wc & ~0x20) >= 'A' && (wc & ~0x20) <= 'Z')));
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswspace
-# else
-iswspace
-# endif
- (wint_t wc)
-{
- return (wc == ' ' || wc == '\t'
- || wc == '\n' || wc == '\v' || wc == '\f' || wc == '\r');
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswupper
-# else
-iswupper
-# endif
- (wint_t wc)
-{
- return wc >= 'A' && wc <= 'Z';
-}
-
-static inline int
-# if @REPLACE_ISWCNTRL@
-rpl_iswxdigit
-# else
-iswxdigit
-# endif
- (wint_t wc)
-{
- return ((wc >= '0' && wc <= '9')
- || ((wc & ~0x20) >= 'A' && (wc & ~0x20) <= 'F'));
-}
-
-static inline wint_t
-# if @REPLACE_TOWLOWER@
-rpl_towlower
-# else
-towlower
-# endif
- (wint_t wc)
-{
- return (wc >= 'A' && wc <= 'Z' ? wc - 'A' + 'a' : wc);
-}
-
-static inline wint_t
-# if @REPLACE_TOWLOWER@
-rpl_towupper
-# else
-towupper
-# endif
- (wint_t wc)
-{
- return (wc >= 'a' && wc <= 'z' ? wc - 'a' + 'A' : wc);
-}
-
-# elif @GNULIB_ISWBLANK@ && (! @HAVE_ISWBLANK@ || @REPLACE_ISWBLANK@)
-/* Only the iswblank function is missing. */
-
-# if @REPLACE_ISWBLANK@
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define iswblank rpl_iswblank
-# endif
-_GL_FUNCDECL_RPL (iswblank, int, (wint_t wc));
-# else
-_GL_FUNCDECL_SYS (iswblank, int, (wint_t wc));
-# endif
-
-# endif
-
-# if defined __MINGW32__
-
-/* On native Windows, wchar_t is uint16_t, and wint_t is uint32_t.
- The functions towlower and towupper are implemented in the MSVCRT library
- to take a wchar_t argument and return a wchar_t result. mingw declares
- these functions to take a wint_t argument and return a wint_t result.
- This means that:
- 1. When the user passes an argument outside the range 0x0000..0xFFFF, the
- function will look only at the lower 16 bits. This is allowed according
- to POSIX.
- 2. The return value is returned in the lower 16 bits of the result register.
- The upper 16 bits are random: whatever happened to be in that part of the
- result register. We need to fix this by adding a zero-extend from
- wchar_t to wint_t after the call. */
-
-static inline wint_t
-rpl_towlower (wint_t wc)
-{
- return (wint_t) (wchar_t) towlower (wc);
-}
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define towlower rpl_towlower
-# endif
-
-static inline wint_t
-rpl_towupper (wint_t wc)
-{
- return (wint_t) (wchar_t) towupper (wc);
-}
-# if !(defined __cplusplus && defined GNULIB_NAMESPACE)
-# define towupper rpl_towupper
-# endif
-
-# endif /* __MINGW32__ */
-
-# define GNULIB_defined_wctype_functions 1
-#endif
-
-#if @REPLACE_ISWCNTRL@
-_GL_CXXALIAS_RPL (iswalnum, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswalpha, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswcntrl, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswdigit, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswgraph, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswlower, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswprint, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswpunct, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswspace, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswupper, int, (wint_t wc));
-_GL_CXXALIAS_RPL (iswxdigit, int, (wint_t wc));
-#else
-_GL_CXXALIAS_SYS (iswalnum, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswalpha, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswcntrl, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswdigit, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswgraph, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswlower, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswprint, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswpunct, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswspace, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswupper, int, (wint_t wc));
-_GL_CXXALIAS_SYS (iswxdigit, int, (wint_t wc));
-#endif
-_GL_CXXALIASWARN (iswalnum);
-_GL_CXXALIASWARN (iswalpha);
-_GL_CXXALIASWARN (iswcntrl);
-_GL_CXXALIASWARN (iswdigit);
-_GL_CXXALIASWARN (iswgraph);
-_GL_CXXALIASWARN (iswlower);
-_GL_CXXALIASWARN (iswprint);
-_GL_CXXALIASWARN (iswpunct);
-_GL_CXXALIASWARN (iswspace);
-_GL_CXXALIASWARN (iswupper);
-_GL_CXXALIASWARN (iswxdigit);
-
-#if @GNULIB_ISWBLANK@
-# if @REPLACE_ISWCNTRL@ || @REPLACE_ISWBLANK@
-_GL_CXXALIAS_RPL (iswblank, int, (wint_t wc));
-# else
-_GL_CXXALIAS_SYS (iswblank, int, (wint_t wc));
-# endif
-_GL_CXXALIASWARN (iswblank);
-#endif
-
-#if !@HAVE_WCTYPE_T@
-# if !GNULIB_defined_wctype_t
-typedef void * wctype_t;
-# define GNULIB_defined_wctype_t 1
-# endif
-#endif
-
-/* Get a descriptor for a wide character property. */
-#if @GNULIB_WCTYPE@
-# if !@HAVE_WCTYPE_T@
-_GL_FUNCDECL_SYS (wctype, wctype_t, (const char *name));
-# endif
-_GL_CXXALIAS_SYS (wctype, wctype_t, (const char *name));
-_GL_CXXALIASWARN (wctype);
-#elif defined GNULIB_POSIXCHECK
-# undef wctype
-# if HAVE_RAW_DECL_WCTYPE
-_GL_WARN_ON_USE (wctype, "wctype is unportable - "
- "use gnulib module wctype for portability");
-# endif
-#endif
-
-/* Test whether a wide character has a given property.
- The argument WC must be either a wchar_t value or WEOF.
- The argument DESC must have been returned by the wctype() function. */
-#if @GNULIB_ISWCTYPE@
-# if !@HAVE_WCTYPE_T@
-_GL_FUNCDECL_SYS (iswctype, int, (wint_t wc, wctype_t desc));
-# endif
-_GL_CXXALIAS_SYS (iswctype, int, (wint_t wc, wctype_t desc));
-_GL_CXXALIASWARN (iswctype);
-#elif defined GNULIB_POSIXCHECK
-# undef iswctype
-# if HAVE_RAW_DECL_ISWCTYPE
-_GL_WARN_ON_USE (iswctype, "iswctype is unportable - "
- "use gnulib module iswctype for portability");
-# endif
-#endif
-
-#if @REPLACE_TOWLOWER@ || defined __MINGW32__
-_GL_CXXALIAS_RPL (towlower, wint_t, (wint_t wc));
-_GL_CXXALIAS_RPL (towupper, wint_t, (wint_t wc));
-#else
-_GL_CXXALIAS_SYS (towlower, wint_t, (wint_t wc));
-_GL_CXXALIAS_SYS (towupper, wint_t, (wint_t wc));
-#endif
-_GL_CXXALIASWARN (towlower);
-_GL_CXXALIASWARN (towupper);
-
-#if !@HAVE_WCTRANS_T@
-# if !GNULIB_defined_wctrans_t
-typedef void * wctrans_t;
-# define GNULIB_defined_wctrans_t 1
-# endif
-#endif
-
-/* Get a descriptor for a wide character case conversion. */
-#if @GNULIB_WCTRANS@
-# if !@HAVE_WCTRANS_T@
-_GL_FUNCDECL_SYS (wctrans, wctrans_t, (const char *name));
-# endif
-_GL_CXXALIAS_SYS (wctrans, wctrans_t, (const char *name));
-_GL_CXXALIASWARN (wctrans);
-#elif defined GNULIB_POSIXCHECK
-# undef wctrans
-# if HAVE_RAW_DECL_WCTRANS
-_GL_WARN_ON_USE (wctrans, "wctrans is unportable - "
- "use gnulib module wctrans for portability");
-# endif
-#endif
-
-/* Perform a given case conversion on a wide character.
- The argument WC must be either a wchar_t value or WEOF.
- The argument DESC must have been returned by the wctrans() function. */
-#if @GNULIB_TOWCTRANS@
-# if !@HAVE_WCTRANS_T@
-_GL_FUNCDECL_SYS (towctrans, wint_t, (wint_t wc, wctrans_t desc));
-# endif
-_GL_CXXALIAS_SYS (towctrans, wint_t, (wint_t wc, wctrans_t desc));
-_GL_CXXALIASWARN (towctrans);
-#elif defined GNULIB_POSIXCHECK
-# undef towctrans
-# if HAVE_RAW_DECL_TOWCTRANS
-_GL_WARN_ON_USE (towctrans, "towctrans is unportable - "
- "use gnulib module towctrans for portability");
-# endif
-#endif
-
-
-#endif /* _@GUARD_PREFIX@_WCTYPE_H */
-#endif /* _@GUARD_PREFIX@_WCTYPE_H */
+++ /dev/null
-/* Report a memory allocation failure and exit.
-
- Copyright (C) 1997-2000, 2002-2004, 2006, 2009-2012 Free Software
- Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-#include "xalloc.h"
-
-#include <stdlib.h>
-
-#include "error.h"
-#include "exitfail.h"
-
-#include "gettext.h"
-#define _(msgid) gettext (msgid)
-
-void
-xalloc_die (void)
-{
- error (exit_failure, 0, "%s", _("memory exhausted"));
-
- /* _Noreturn cannot be given to error, since it may return if
- its first argument is 0. To help compilers understand the
- xalloc_die does not return, call abort. Also, the abort is a
- safety feature if exit_failure is 0 (which shouldn't happen). */
- abort ();
-}
+++ /dev/null
-/* xalloc-oversized.h -- memory allocation size checking
-
- Copyright (C) 1990-2000, 2003-2004, 2006-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef XALLOC_OVERSIZED_H_
-# define XALLOC_OVERSIZED_H_
-
-# include <stddef.h>
-
-/* Return 1 if an array of N objects, each of size S, cannot exist due
- to size arithmetic overflow. S must be positive and N must be
- nonnegative. This is a macro, not an inline function, so that it
- works correctly even when SIZE_MAX < N.
-
- By gnulib convention, SIZE_MAX represents overflow in size
- calculations, so the conservative dividend to use here is
- SIZE_MAX - 1, since SIZE_MAX might represent an overflowed value.
- However, malloc (SIZE_MAX) fails on all known hosts where
- sizeof (ptrdiff_t) <= sizeof (size_t), so do not bother to test for
- exactly-SIZE_MAX allocations on such hosts; this avoids a test and
- branch when S is known to be 1. */
-# define xalloc_oversized(n, s) \
- ((size_t) (sizeof (ptrdiff_t) <= sizeof (size_t) ? -1 : -2) / (s) < (n))
-
-#endif /* !XALLOC_OVERSIZED_H_ */
+++ /dev/null
-/* xalloc.h -- malloc with out-of-memory checking
-
- Copyright (C) 1990-2000, 2003-2004, 2006-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef XALLOC_H_
-# define XALLOC_H_
-
-# include <stddef.h>
-
-# include "xalloc-oversized.h"
-
-# ifdef __cplusplus
-extern "C" {
-# endif
-
-
-# if __GNUC__ >= 3
-# define _GL_ATTRIBUTE_MALLOC __attribute__ ((__malloc__))
-# else
-# define _GL_ATTRIBUTE_MALLOC
-# endif
-
-# if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3)
-# define _GL_ATTRIBUTE_ALLOC_SIZE(args) __attribute__ ((__alloc_size__ args))
-# else
-# define _GL_ATTRIBUTE_ALLOC_SIZE(args)
-# endif
-
-/* This function is always triggered when memory is exhausted.
- It must be defined by the application, either explicitly
- or by using gnulib's xalloc-die module. This is the
- function to call when one wants the program to die because of a
- memory allocation failure. */
-extern _Noreturn void xalloc_die (void);
-
-void *xmalloc (size_t s)
- _GL_ATTRIBUTE_MALLOC _GL_ATTRIBUTE_ALLOC_SIZE ((1));
-void *xzalloc (size_t s)
- _GL_ATTRIBUTE_MALLOC _GL_ATTRIBUTE_ALLOC_SIZE ((1));
-void *xcalloc (size_t n, size_t s)
- _GL_ATTRIBUTE_MALLOC _GL_ATTRIBUTE_ALLOC_SIZE ((1, 2));
-void *xrealloc (void *p, size_t s)
- _GL_ATTRIBUTE_ALLOC_SIZE ((2));
-void *x2realloc (void *p, size_t *pn);
-void *xmemdup (void const *p, size_t s)
- _GL_ATTRIBUTE_MALLOC _GL_ATTRIBUTE_ALLOC_SIZE ((2));
-char *xstrdup (char const *str)
- _GL_ATTRIBUTE_MALLOC;
-
-/* In the following macros, T must be an elementary or structure/union or
- typedef'ed type, or a pointer to such a type. To apply one of the
- following macros to a function pointer or array type, you need to typedef
- it first and use the typedef name. */
-
-/* Allocate an object of type T dynamically, with error checking. */
-/* extern t *XMALLOC (typename t); */
-# define XMALLOC(t) ((t *) xmalloc (sizeof (t)))
-
-/* Allocate memory for N elements of type T, with error checking. */
-/* extern t *XNMALLOC (size_t n, typename t); */
-# define XNMALLOC(n, t) \
- ((t *) (sizeof (t) == 1 ? xmalloc (n) : xnmalloc (n, sizeof (t))))
-
-/* Allocate an object of type T dynamically, with error checking,
- and zero it. */
-/* extern t *XZALLOC (typename t); */
-# define XZALLOC(t) ((t *) xzalloc (sizeof (t)))
-
-/* Allocate memory for N elements of type T, with error checking,
- and zero it. */
-/* extern t *XCALLOC (size_t n, typename t); */
-# define XCALLOC(n, t) \
- ((t *) (sizeof (t) == 1 ? xzalloc (n) : xcalloc (n, sizeof (t))))
-
-
-# if HAVE_INLINE
-# define static_inline static inline
-# else
-void *xnmalloc (size_t n, size_t s)
- _GL_ATTRIBUTE_MALLOC _GL_ATTRIBUTE_ALLOC_SIZE ((1, 2));
-void *xnrealloc (void *p, size_t n, size_t s)
- _GL_ATTRIBUTE_ALLOC_SIZE ((2, 3));
-void *x2nrealloc (void *p, size_t *pn, size_t s);
-char *xcharalloc (size_t n)
- _GL_ATTRIBUTE_MALLOC _GL_ATTRIBUTE_ALLOC_SIZE ((1));
-# endif
-
-# ifdef static_inline
-
-/* Allocate an array of N objects, each with S bytes of memory,
- dynamically, with error checking. S must be nonzero. */
-
-static_inline void *xnmalloc (size_t n, size_t s)
- _GL_ATTRIBUTE_MALLOC _GL_ATTRIBUTE_ALLOC_SIZE ((1, 2));
-static_inline void *
-xnmalloc (size_t n, size_t s)
-{
- if (xalloc_oversized (n, s))
- xalloc_die ();
- return xmalloc (n * s);
-}
-
-/* Change the size of an allocated block of memory P to an array of N
- objects each of S bytes, with error checking. S must be nonzero. */
-
-static_inline void *xnrealloc (void *p, size_t n, size_t s)
- _GL_ATTRIBUTE_ALLOC_SIZE ((2, 3));
-static_inline void *
-xnrealloc (void *p, size_t n, size_t s)
-{
- if (xalloc_oversized (n, s))
- xalloc_die ();
- return xrealloc (p, n * s);
-}
-
-/* If P is null, allocate a block of at least *PN such objects;
- otherwise, reallocate P so that it contains more than *PN objects
- each of S bytes. *PN must be nonzero unless P is null, and S must
- be nonzero. Set *PN to the new number of objects, and return the
- pointer to the new block. *PN is never set to zero, and the
- returned pointer is never null.
-
- Repeated reallocations are guaranteed to make progress, either by
- allocating an initial block with a nonzero size, or by allocating a
- larger block.
-
- In the following implementation, nonzero sizes are increased by a
- factor of approximately 1.5 so that repeated reallocations have
- O(N) overall cost rather than O(N**2) cost, but the
- specification for this function does not guarantee that rate.
-
- Here is an example of use:
-
- int *p = NULL;
- size_t used = 0;
- size_t allocated = 0;
-
- void
- append_int (int value)
- {
- if (used == allocated)
- p = x2nrealloc (p, &allocated, sizeof *p);
- p[used++] = value;
- }
-
- This causes x2nrealloc to allocate a block of some nonzero size the
- first time it is called.
-
- To have finer-grained control over the initial size, set *PN to a
- nonzero value before calling this function with P == NULL. For
- example:
-
- int *p = NULL;
- size_t used = 0;
- size_t allocated = 0;
- size_t allocated1 = 1000;
-
- void
- append_int (int value)
- {
- if (used == allocated)
- {
- p = x2nrealloc (p, &allocated1, sizeof *p);
- allocated = allocated1;
- }
- p[used++] = value;
- }
-
- */
-
-static_inline void *
-x2nrealloc (void *p, size_t *pn, size_t s)
-{
- size_t n = *pn;
-
- if (! p)
- {
- if (! n)
- {
- /* The approximate size to use for initial small allocation
- requests, when the invoking code specifies an old size of
- zero. This is the largest "small" request for the GNU C
- library malloc. */
- enum { DEFAULT_MXFAST = 64 * sizeof (size_t) / 4 };
-
- n = DEFAULT_MXFAST / s;
- n += !n;
- }
- }
- else
- {
- /* Set N = ceil (1.5 * N) so that progress is made if N == 1.
- Check for overflow, so that N * S stays in size_t range.
- The check is slightly conservative, but an exact check isn't
- worth the trouble. */
- if ((size_t) -1 / 3 * 2 / s <= n)
- xalloc_die ();
- n += (n + 1) / 2;
- }
-
- *pn = n;
- return xrealloc (p, n * s);
-}
-
-/* Return a pointer to a new buffer of N bytes. This is like xmalloc,
- except it returns char *. */
-
-static_inline char *xcharalloc (size_t n)
- _GL_ATTRIBUTE_MALLOC _GL_ATTRIBUTE_ALLOC_SIZE ((1));
-static_inline char *
-xcharalloc (size_t n)
-{
- return XNMALLOC (n, char);
-}
-
-# endif
-
-# ifdef __cplusplus
-}
-
-/* C++ does not allow conversions from void * to other pointer types
- without a cast. Use templates to work around the problem when
- possible. */
-
-template <typename T> inline T *
-xrealloc (T *p, size_t s)
-{
- return (T *) xrealloc ((void *) p, s);
-}
-
-template <typename T> inline T *
-xnrealloc (T *p, size_t n, size_t s)
-{
- return (T *) xnrealloc ((void *) p, n, s);
-}
-
-template <typename T> inline T *
-x2realloc (T *p, size_t *pn)
-{
- return (T *) x2realloc ((void *) p, pn);
-}
-
-template <typename T> inline T *
-x2nrealloc (T *p, size_t *pn, size_t s)
-{
- return (T *) x2nrealloc ((void *) p, pn, s);
-}
-
-template <typename T> inline T *
-xmemdup (T const *p, size_t s)
-{
- return (T *) xmemdup ((void const *) p, s);
-}
-
-# endif
-
-
-#endif /* !XALLOC_H_ */
+++ /dev/null
-/* xmalloc.c -- malloc with out of memory checking
-
- Copyright (C) 1990-2000, 2002-2006, 2008-2012 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-
-#if ! HAVE_INLINE
-# define static_inline
-#endif
-#include "xalloc.h"
-#undef static_inline
-
-#include <stdlib.h>
-#include <string.h>
-
-/* 1 if calloc is known to be compatible with GNU calloc. This
- matters if we are not also using the calloc module, which defines
- HAVE_CALLOC_GNU and supports the GNU API even on non-GNU platforms. */
-#if defined HAVE_CALLOC_GNU || (defined __GLIBC__ && !defined __UCLIBC__)
-enum { HAVE_GNU_CALLOC = 1 };
-#else
-enum { HAVE_GNU_CALLOC = 0 };
-#endif
-
-/* Allocate N bytes of memory dynamically, with error checking. */
-
-void *
-xmalloc (size_t n)
-{
- void *p = malloc (n);
- if (!p && n != 0)
- xalloc_die ();
- return p;
-}
-
-/* Change the size of an allocated block of memory P to N bytes,
- with error checking. */
-
-void *
-xrealloc (void *p, size_t n)
-{
- if (!n && p)
- {
- /* The GNU and C99 realloc behaviors disagree here. Act like
- GNU, even if the underlying realloc is C99. */
- free (p);
- return NULL;
- }
-
- p = realloc (p, n);
- if (!p && n)
- xalloc_die ();
- return p;
-}
-
-/* If P is null, allocate a block of at least *PN bytes; otherwise,
- reallocate P so that it contains more than *PN bytes. *PN must be
- nonzero unless P is null. Set *PN to the new block's size, and
- return the pointer to the new block. *PN is never set to zero, and
- the returned pointer is never null. */
-
-void *
-x2realloc (void *p, size_t *pn)
-{
- return x2nrealloc (p, pn, 1);
-}
-
-/* Allocate S bytes of zeroed memory dynamically, with error checking.
- There's no need for xnzalloc (N, S), since it would be equivalent
- to xcalloc (N, S). */
-
-void *
-xzalloc (size_t s)
-{
- return memset (xmalloc (s), 0, s);
-}
-
-/* Allocate zeroed memory for N elements of S bytes, with error
- checking. S must be nonzero. */
-
-void *
-xcalloc (size_t n, size_t s)
-{
- void *p;
- /* Test for overflow, since some calloc implementations don't have
- proper overflow checks. But omit overflow and size-zero tests if
- HAVE_GNU_CALLOC, since GNU calloc catches overflow and never
- returns NULL if successful. */
- if ((! HAVE_GNU_CALLOC && xalloc_oversized (n, s))
- || (! (p = calloc (n, s)) && (HAVE_GNU_CALLOC || n != 0)))
- xalloc_die ();
- return p;
-}
-
-/* Clone an object P of size S, with error checking. There's no need
- for xnmemdup (P, N, S), since xmemdup (P, N * S) works without any
- need for an arithmetic overflow check. */
-
-void *
-xmemdup (void const *p, size_t s)
-{
- return memcpy (xmalloc (s), p, s);
-}
-
-/* Clone STRING. */
-
-char *
-xstrdup (char const *string)
-{
- return xmemdup (string, strlen (string) + 1);
-}
+++ /dev/null
-# 00gnulib.m4 serial 2
-dnl Copyright (C) 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This file must be named something that sorts before all other
-dnl gnulib-provided .m4 files. It is needed until such time as we can
-dnl assume Autoconf 2.64, with its improved AC_DEFUN_ONCE semantics.
-
-# AC_DEFUN_ONCE([NAME], VALUE)
-# ----------------------------
-# Define NAME to expand to VALUE on the first use (whether by direct
-# expansion, or by AC_REQUIRE), and to nothing on all subsequent uses.
-# Avoid bugs in AC_REQUIRE in Autoconf 2.63 and earlier. This
-# definition is slower than the version in Autoconf 2.64, because it
-# can only use interfaces that existed since 2.59; but it achieves the
-# same effect. Quoting is necessary to avoid confusing Automake.
-m4_version_prereq([2.63.263], [],
-[m4_define([AC][_DEFUN_ONCE],
- [AC][_DEFUN([$1],
- [AC_REQUIRE([_gl_DEFUN_ONCE([$1])],
- [m4_indir([_gl_DEFUN_ONCE([$1])])])])]dnl
-[AC][_DEFUN([_gl_DEFUN_ONCE([$1])], [$2])])])
-
-# gl_00GNULIB
-# -----------
-# Witness macro that this file has been included. Needed to force
-# Automake to include this file prior to all other gnulib .m4 files.
-AC_DEFUN([gl_00GNULIB])
+++ /dev/null
-#serial 4
-dnl Copyright (C) 2006-2007, 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Prerequisites of lib/close-stream.c.
-AC_DEFUN([gl_CLOSE_STREAM],
-[
- :
-])
+++ /dev/null
-# closeout.m4 serial 6
-dnl Copyright (C) 2002-2003, 2005-2006, 2009-2012 Free Software Foundation,
-dnl Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Prerequisites of lib/closeout.c.
-AC_DEFUN([gl_CLOSEOUT],
-[
- :
-])
+++ /dev/null
-# codeset.m4 serial 5 (gettext-0.18.2)
-dnl Copyright (C) 2000-2002, 2006, 2008-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_LANGINFO_CODESET],
-[
- AC_CACHE_CHECK([for nl_langinfo and CODESET], [am_cv_langinfo_codeset],
- [AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <langinfo.h>]],
- [[char* cs = nl_langinfo(CODESET); return !cs;]])],
- [am_cv_langinfo_codeset=yes],
- [am_cv_langinfo_codeset=no])
- ])
- if test $am_cv_langinfo_codeset = yes; then
- AC_DEFINE([HAVE_LANGINFO_CODESET], [1],
- [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
- fi
-])
+++ /dev/null
-# configmake.m4 serial 1
-dnl Copyright (C) 2010-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-# gl_CONFIGMAKE_PREP
-# ------------------
-# Guarantee all of the standard directory variables, even when used with
-# autoconf 2.59 (datarootdir wasn't supported until 2.59c) or automake
-# 1.9.6 (pkglibexecdir wasn't supported until 1.10b.).
-AC_DEFUN([gl_CONFIGMAKE_PREP],
-[
- dnl Technically, datadir should default to datarootdir. But if
- dnl autoconf is too old to provide datarootdir, then reversing the
- dnl definition is a reasonable compromise. Only AC_SUBST a variable
- dnl if it was not already defined earlier by autoconf.
- if test "x$datarootdir" = x; then
- AC_SUBST([datarootdir], ['${datadir}'])
- fi
- dnl Copy the approach used in autoconf 2.60.
- if test "x$docdir" = x; then
- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME],
- ['${datarootdir}/doc/${PACKAGE_TARNAME}'],
- ['${datarootdir}/doc/${PACKAGE}'])])
- fi
- dnl The remaining variables missing from autoconf 2.59 are easier.
- if test "x$htmldir" = x; then
- AC_SUBST([htmldir], ['${docdir}'])
- fi
- if test "x$dvidir" = x; then
- AC_SUBST([dvidir], ['${docdir}'])
- fi
- if test "x$pdfdir" = x; then
- AC_SUBST([pdfdir], ['${docdir}'])
- fi
- if test "x$psdir" = x; then
- AC_SUBST([psdir], ['${docdir}'])
- fi
- if test "x$lispdir" = x; then
- AC_SUBST([lispdir], ['${datarootdir}/emacs/site-lisp'])
- fi
- if test "x$localedir" = x; then
- AC_SUBST([localedir], ['${datarootdir}/locale'])
- fi
-
- dnl Automake 1.9.6 only lacks pkglibexecdir; and since 1.11 merely
- dnl provides it without AC_SUBST, this blind use of AC_SUBST is safe.
- AC_SUBST([pkglibexecdir], ['${libexecdir}/${PACKAGE}'])
-])
+++ /dev/null
-# errno_h.m4 serial 10
-dnl Copyright (C) 2004, 2006, 2008-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN_ONCE([gl_HEADER_ERRNO_H],
-[
- AC_REQUIRE([AC_PROG_CC])
- AC_CACHE_CHECK([for complete errno.h], [gl_cv_header_errno_h_complete], [
- AC_EGREP_CPP([booboo],[
-#include <errno.h>
-#if !defined ENOMSG
-booboo
-#endif
-#if !defined EIDRM
-booboo
-#endif
-#if !defined ENOLINK
-booboo
-#endif
-#if !defined EPROTO
-booboo
-#endif
-#if !defined EMULTIHOP
-booboo
-#endif
-#if !defined EBADMSG
-booboo
-#endif
-#if !defined EOVERFLOW
-booboo
-#endif
-#if !defined ENOTSUP
-booboo
-#endif
-#if !defined ENETRESET
-booboo
-#endif
-#if !defined ECONNABORTED
-booboo
-#endif
-#if !defined ESTALE
-booboo
-#endif
-#if !defined EDQUOT
-booboo
-#endif
-#if !defined ECANCELED
-booboo
-#endif
- ],
- [gl_cv_header_errno_h_complete=no],
- [gl_cv_header_errno_h_complete=yes])
- ])
- if test $gl_cv_header_errno_h_complete = yes; then
- ERRNO_H=''
- else
- gl_NEXT_HEADERS([errno.h])
- ERRNO_H='errno.h'
- fi
- AC_SUBST([ERRNO_H])
- AM_CONDITIONAL([GL_GENERATE_ERRNO_H], [test -n "$ERRNO_H"])
- gl_REPLACE_ERRNO_VALUE([EMULTIHOP])
- gl_REPLACE_ERRNO_VALUE([ENOLINK])
- gl_REPLACE_ERRNO_VALUE([EOVERFLOW])
-])
-
-# Assuming $1 = EOVERFLOW.
-# The EOVERFLOW errno value ought to be defined in <errno.h>, according to
-# POSIX. But some systems (like OpenBSD 4.0 or AIX 3) don't define it, and
-# some systems (like OSF/1) define it when _XOPEN_SOURCE_EXTENDED is defined.
-# Check for the value of EOVERFLOW.
-# Set the variables EOVERFLOW_HIDDEN and EOVERFLOW_VALUE.
-AC_DEFUN([gl_REPLACE_ERRNO_VALUE],
-[
- if test -n "$ERRNO_H"; then
- AC_CACHE_CHECK([for ]$1[ value], [gl_cv_header_errno_h_]$1, [
- AC_EGREP_CPP([yes],[
-#include <errno.h>
-#ifdef ]$1[
-yes
-#endif
- ],
- [gl_cv_header_errno_h_]$1[=yes],
- [gl_cv_header_errno_h_]$1[=no])
- if test $gl_cv_header_errno_h_]$1[ = no; then
- AC_EGREP_CPP([yes],[
-#define _XOPEN_SOURCE_EXTENDED 1
-#include <errno.h>
-#ifdef ]$1[
-yes
-#endif
- ], [gl_cv_header_errno_h_]$1[=hidden])
- if test $gl_cv_header_errno_h_]$1[ = hidden; then
- dnl The macro exists but is hidden.
- dnl Define it to the same value.
- AC_COMPUTE_INT([gl_cv_header_errno_h_]$1, $1, [
-#define _XOPEN_SOURCE_EXTENDED 1
-#include <errno.h>
-/* The following two lines are a workaround against an autoconf-2.52 bug. */
-#include <stdio.h>
-#include <stdlib.h>
-])
- fi
- fi
- ])
- case $gl_cv_header_errno_h_]$1[ in
- yes | no)
- ]$1[_HIDDEN=0; ]$1[_VALUE=
- ;;
- *)
- ]$1[_HIDDEN=1; ]$1[_VALUE="$gl_cv_header_errno_h_]$1["
- ;;
- esac
- AC_SUBST($1[_HIDDEN])
- AC_SUBST($1[_VALUE])
- fi
-])
-
-dnl Autoconf >= 2.61 has AC_COMPUTE_INT built-in.
-dnl Remove this when we can assume autoconf >= 2.61.
-m4_ifdef([AC_COMPUTE_INT], [], [
- AC_DEFUN([AC_COMPUTE_INT], [_AC_COMPUTE_INT([$2],[$1],[$3],[$4])])
-])
+++ /dev/null
-#serial 14
-
-# Copyright (C) 1996-1998, 2001-2004, 2009-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_ERROR],
-[
- dnl We don't use AC_FUNC_ERROR_AT_LINE any more, because it is no longer
- dnl maintained in Autoconf and because it invokes AC_LIBOBJ.
- AC_CACHE_CHECK([for error_at_line], [ac_cv_lib_error_at_line],
- [AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <error.h>]],
- [[error_at_line (0, 0, "", 0, "an error occurred");]])],
- [ac_cv_lib_error_at_line=yes],
- [ac_cv_lib_error_at_line=no])])
-])
-
-# Prerequisites of lib/error.c.
-AC_DEFUN([gl_PREREQ_ERROR],
-[
- AC_REQUIRE([AC_FUNC_STRERROR_R])
- AC_REQUIRE([AC_C_INLINE])
- :
-])
+++ /dev/null
-# serial 11 -*- Autoconf -*-
-# Enable extensions on systems that normally disable them.
-
-# Copyright (C) 2003, 2006-2012 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This definition of AC_USE_SYSTEM_EXTENSIONS is stolen from CVS
-# Autoconf. Perhaps we can remove this once we can assume Autoconf
-# 2.62 or later everywhere, but since CVS Autoconf mutates rapidly
-# enough in this area it's likely we'll need to redefine
-# AC_USE_SYSTEM_EXTENSIONS for quite some time.
-
-# If autoconf reports a warning
-# warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
-# or warning: AC_RUN_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
-# the fix is
-# 1) to ensure that AC_USE_SYSTEM_EXTENSIONS is never directly invoked
-# but always AC_REQUIREd,
-# 2) to ensure that for each occurrence of
-# AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])
-# or
-# AC_REQUIRE([gl_USE_SYSTEM_EXTENSIONS])
-# the corresponding gnulib module description has 'extensions' among
-# its dependencies. This will ensure that the gl_USE_SYSTEM_EXTENSIONS
-# invocation occurs in gl_EARLY, not in gl_INIT.
-
-# AC_USE_SYSTEM_EXTENSIONS
-# ------------------------
-# Enable extensions on systems that normally disable them,
-# typically due to standards-conformance issues.
-# Remember that #undef in AH_VERBATIM gets replaced with #define by
-# AC_DEFINE. The goal here is to define all known feature-enabling
-# macros, then, if reports of conflicts are made, disable macros that
-# cause problems on some platforms (such as __EXTENSIONS__).
-AC_DEFUN_ONCE([AC_USE_SYSTEM_EXTENSIONS],
-[AC_BEFORE([$0], [AC_COMPILE_IFELSE])dnl
-AC_BEFORE([$0], [AC_RUN_IFELSE])dnl
-
- AC_REQUIRE([AC_CANONICAL_HOST])
-
- AC_CHECK_HEADER([minix/config.h], [MINIX=yes], [MINIX=])
- if test "$MINIX" = yes; then
- AC_DEFINE([_POSIX_SOURCE], [1],
- [Define to 1 if you need to in order for 'stat' and other
- things to work.])
- AC_DEFINE([_POSIX_1_SOURCE], [2],
- [Define to 2 if the system does not provide POSIX.1 features
- except with this defined.])
- AC_DEFINE([_MINIX], [1],
- [Define to 1 if on MINIX.])
- fi
-
- dnl HP-UX 11.11 defines mbstate_t only if _XOPEN_SOURCE is defined to 500,
- dnl regardless of whether the flags -Ae or _D_HPUX_SOURCE=1 are already
- dnl provided.
- case "$host_os" in
- hpux*)
- AC_DEFINE([_XOPEN_SOURCE], [500],
- [Define to 500 only on HP-UX.])
- ;;
- esac
-
- AH_VERBATIM([__EXTENSIONS__],
-[/* Enable extensions on AIX 3, Interix. */
-#ifndef _ALL_SOURCE
-# undef _ALL_SOURCE
-#endif
-/* Enable general extensions on MacOS X. */
-#ifndef _DARWIN_C_SOURCE
-# undef _DARWIN_C_SOURCE
-#endif
-/* Enable GNU extensions on systems that have them. */
-#ifndef _GNU_SOURCE
-# undef _GNU_SOURCE
-#endif
-/* Enable threading extensions on Solaris. */
-#ifndef _POSIX_PTHREAD_SEMANTICS
-# undef _POSIX_PTHREAD_SEMANTICS
-#endif
-/* Enable extensions on HP NonStop. */
-#ifndef _TANDEM_SOURCE
-# undef _TANDEM_SOURCE
-#endif
-/* Enable general extensions on Solaris. */
-#ifndef __EXTENSIONS__
-# undef __EXTENSIONS__
-#endif
-])
- AC_CACHE_CHECK([whether it is safe to define __EXTENSIONS__],
- [ac_cv_safe_to_define___extensions__],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM([[
-# define __EXTENSIONS__ 1
- ]AC_INCLUDES_DEFAULT])],
- [ac_cv_safe_to_define___extensions__=yes],
- [ac_cv_safe_to_define___extensions__=no])])
- test $ac_cv_safe_to_define___extensions__ = yes &&
- AC_DEFINE([__EXTENSIONS__])
- AC_DEFINE([_ALL_SOURCE])
- AC_DEFINE([_DARWIN_C_SOURCE])
- AC_DEFINE([_GNU_SOURCE])
- AC_DEFINE([_POSIX_PTHREAD_SEMANTICS])
- AC_DEFINE([_TANDEM_SOURCE])
-])# AC_USE_SYSTEM_EXTENSIONS
-
-# gl_USE_SYSTEM_EXTENSIONS
-# ------------------------
-# Enable extensions on systems that normally disable them,
-# typically due to standards-conformance issues.
-AC_DEFUN_ONCE([gl_USE_SYSTEM_EXTENSIONS],
-[
- dnl Require this macro before AC_USE_SYSTEM_EXTENSIONS.
- dnl gnulib does not need it. But if it gets required by third-party macros
- dnl after AC_USE_SYSTEM_EXTENSIONS is required, autoconf 2.62..2.63 emit a
- dnl warning: "AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS".
- dnl Note: We can do this only for one of the macros AC_AIX, AC_GNU_SOURCE,
- dnl AC_MINIX. If people still use AC_AIX or AC_MINIX, they are out of luck.
- AC_REQUIRE([AC_GNU_SOURCE])
-
- AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])
-])
+++ /dev/null
-# fcntl-o.m4 serial 4
-dnl Copyright (C) 2006, 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Written by Paul Eggert.
-
-# Test whether the flags O_NOATIME and O_NOFOLLOW actually work.
-# Define HAVE_WORKING_O_NOATIME to 1 if O_NOATIME works, or to 0 otherwise.
-# Define HAVE_WORKING_O_NOFOLLOW to 1 if O_NOFOLLOW works, or to 0 otherwise.
-AC_DEFUN([gl_FCNTL_O_FLAGS],
-[
- dnl Persuade glibc <fcntl.h> to define O_NOATIME and O_NOFOLLOW.
- dnl AC_USE_SYSTEM_EXTENSIONS was introduced in autoconf 2.60 and obsoletes
- dnl AC_GNU_SOURCE.
- m4_ifdef([AC_USE_SYSTEM_EXTENSIONS],
- [AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])],
- [AC_REQUIRE([AC_GNU_SOURCE])])
-
- AC_CHECK_HEADERS_ONCE([unistd.h])
- AC_CHECK_FUNCS_ONCE([symlink])
- AC_CACHE_CHECK([for working fcntl.h], [gl_cv_header_working_fcntl_h],
- [AC_RUN_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <sys/types.h>
- #include <sys/stat.h>
- #if HAVE_UNISTD_H
- # include <unistd.h>
- #else /* on Windows with MSVC */
- # include <io.h>
- # include <stdlib.h>
- # defined sleep(n) _sleep ((n) * 1000)
- #endif
- #include <fcntl.h>
- #ifndef O_NOATIME
- #define O_NOATIME 0
- #endif
- #ifndef O_NOFOLLOW
- #define O_NOFOLLOW 0
- #endif
- static int const constants[] =
- {
- O_CREAT, O_EXCL, O_NOCTTY, O_TRUNC, O_APPEND,
- O_NONBLOCK, O_SYNC, O_ACCMODE, O_RDONLY, O_RDWR, O_WRONLY
- };
- ]],
- [[
- int result = !constants;
- #if HAVE_SYMLINK
- {
- static char const sym[] = "conftest.sym";
- if (symlink (".", sym) != 0)
- result |= 2;
- else
- {
- int fd = open (sym, O_RDONLY | O_NOFOLLOW);
- if (fd >= 0)
- {
- close (fd);
- result |= 4;
- }
- }
- unlink (sym);
- }
- #endif
- {
- static char const file[] = "confdefs.h";
- int fd = open (file, O_RDONLY | O_NOATIME);
- if (fd < 0)
- result |= 8;
- else
- {
- struct stat st0;
- if (fstat (fd, &st0) != 0)
- result |= 16;
- else
- {
- char c;
- sleep (1);
- if (read (fd, &c, 1) != 1)
- result |= 24;
- else
- {
- if (close (fd) != 0)
- result |= 32;
- else
- {
- struct stat st1;
- if (stat (file, &st1) != 0)
- result |= 40;
- else
- if (st0.st_atime != st1.st_atime)
- result |= 64;
- }
- }
- }
- }
- }
- return result;]])],
- [gl_cv_header_working_fcntl_h=yes],
- [case $? in #(
- 4) gl_cv_header_working_fcntl_h='no (bad O_NOFOLLOW)';; #(
- 64) gl_cv_header_working_fcntl_h='no (bad O_NOATIME)';; #(
- 68) gl_cv_header_working_fcntl_h='no (bad O_NOATIME, O_NOFOLLOW)';; #(
- *) gl_cv_header_working_fcntl_h='no';;
- esac],
- [gl_cv_header_working_fcntl_h=cross-compiling])])
-
- case $gl_cv_header_working_fcntl_h in #(
- *O_NOATIME* | no | cross-compiling) ac_val=0;; #(
- *) ac_val=1;;
- esac
- AC_DEFINE_UNQUOTED([HAVE_WORKING_O_NOATIME], [$ac_val],
- [Define to 1 if O_NOATIME works.])
-
- case $gl_cv_header_working_fcntl_h in #(
- *O_NOFOLLOW* | no | cross-compiling) ac_val=0;; #(
- *) ac_val=1;;
- esac
- AC_DEFINE_UNQUOTED([HAVE_WORKING_O_NOFOLLOW], [$ac_val],
- [Define to 1 if O_NOFOLLOW works.])
-])
+++ /dev/null
-# serial 19
-
-# Copyright (C) 2000-2001, 2004-2012 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-dnl From Jim Meyering
-dnl Using code from emacs, based on suggestions from Paul Eggert
-dnl and Ulrich Drepper.
-
-dnl Find out how to determine the number of pending output bytes on a stream.
-dnl glibc (2.1.93 and newer) and Solaris provide __fpending. On other systems,
-dnl we have to grub around in the FILE struct.
-
-AC_DEFUN([gl_FUNC_FPENDING],
-[
- AC_CHECK_HEADERS_ONCE([stdio_ext.h])
- AC_CHECK_FUNCS_ONCE([__fpending])
- fp_headers='
-# include <stdio.h>
-# if HAVE_STDIO_EXT_H
-# include <stdio_ext.h>
-# endif
-'
- AC_CHECK_DECLS([__fpending], , , $fp_headers)
-])
-
-AC_DEFUN([gl_PREREQ_FPENDING],
-[
- AC_CACHE_CHECK(
- [how to determine the number of pending output bytes on a stream],
- ac_cv_sys_pending_output_n_bytes,
- [
- for ac_expr in \
- \
- '# glibc2' \
- 'fp->_IO_write_ptr - fp->_IO_write_base' \
- \
- '# traditional Unix' \
- 'fp->_ptr - fp->_base' \
- \
- '# BSD' \
- 'fp->_p - fp->_bf._base' \
- \
- '# SCO, Unixware' \
- '(fp->__ptr ? fp->__ptr - fp->__base : 0)' \
- \
- '# QNX' \
- '(fp->_Mode & 0x2000 /*_MWRITE*/ ? fp->_Next - fp->_Buf : 0)' \
- \
- '# old glibc?' \
- 'fp->__bufp - fp->__buffer' \
- \
- '# old glibc iostream?' \
- 'fp->_pptr - fp->_pbase' \
- \
- '# emx+gcc' \
- 'fp->_ptr - fp->_buffer' \
- \
- '# Minix' \
- 'fp->_ptr - fp->_buf' \
- \
- '# Plan9' \
- 'fp->wp - fp->buf' \
- \
- '# VMS' \
- '(*fp)->_ptr - (*fp)->_base' \
- \
- '# e.g., DGUX R4.11; the info is not available' \
- 1 \
- ; do
-
- # Skip each embedded comment.
- case "$ac_expr" in '#'*) continue;; esac
-
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <stdio.h>]],
- [[FILE *fp = stdin; (void) ($ac_expr);]])],
- [fp_done=yes]
- )
- test "$fp_done" = yes && break
- done
-
- ac_cv_sys_pending_output_n_bytes=$ac_expr
- ]
- )
- AC_DEFINE_UNQUOTED([PENDING_OUTPUT_N_BYTES],
- $ac_cv_sys_pending_output_n_bytes,
- [the number of pending output bytes on stream 'fp'])
-])
+++ /dev/null
-# getopt.m4 serial 39
-dnl Copyright (C) 2002-2006, 2008-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-# Request a POSIX compliant getopt function.
-AC_DEFUN([gl_FUNC_GETOPT_POSIX],
-[
- m4_divert_text([DEFAULTS], [gl_getopt_required=POSIX])
- AC_REQUIRE([gl_UNISTD_H_DEFAULTS])
- dnl Other modules can request the gnulib implementation of the getopt
- dnl functions unconditionally, by defining gl_REPLACE_GETOPT_ALWAYS.
- dnl argp.m4 does this.
- m4_ifdef([gl_REPLACE_GETOPT_ALWAYS], [
- gl_GETOPT_IFELSE([], [])
- REPLACE_GETOPT=1
- ], [
- REPLACE_GETOPT=0
- gl_GETOPT_IFELSE([
- REPLACE_GETOPT=1
- ],
- [])
- ])
- if test $REPLACE_GETOPT = 1; then
- dnl Arrange for getopt.h to be created.
- gl_GETOPT_SUBSTITUTE_HEADER
- fi
-])
-
-# Request a POSIX compliant getopt function with GNU extensions (such as
-# options with optional arguments) and the functions getopt_long,
-# getopt_long_only.
-AC_DEFUN([gl_FUNC_GETOPT_GNU],
-[
- m4_divert_text([INIT_PREPARE], [gl_getopt_required=GNU])
-
- AC_REQUIRE([gl_FUNC_GETOPT_POSIX])
-])
-
-# emacs' configure.in uses this.
-AC_DEFUN([gl_GETOPT_IFELSE],
-[
- AC_REQUIRE([gl_GETOPT_CHECK_HEADERS])
- AS_IF([test -n "$gl_replace_getopt"], [$1], [$2])
-])
-
-# Determine whether to replace the entire getopt facility.
-AC_DEFUN([gl_GETOPT_CHECK_HEADERS],
-[
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
- AC_REQUIRE([AC_PROG_AWK]) dnl for awk that supports ENVIRON
-
- dnl Persuade Solaris <unistd.h> to declare optarg, optind, opterr, optopt.
- AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])
-
- gl_CHECK_NEXT_HEADERS([getopt.h])
- if test $ac_cv_header_getopt_h = yes; then
- HAVE_GETOPT_H=1
- else
- HAVE_GETOPT_H=0
- fi
- AC_SUBST([HAVE_GETOPT_H])
-
- gl_replace_getopt=
-
- dnl Test whether <getopt.h> is available.
- if test -z "$gl_replace_getopt" && test $gl_getopt_required = GNU; then
- AC_CHECK_HEADERS([getopt.h], [], [gl_replace_getopt=yes])
- fi
-
- dnl Test whether the function getopt_long is available.
- if test -z "$gl_replace_getopt" && test $gl_getopt_required = GNU; then
- AC_CHECK_FUNCS([getopt_long_only], [], [gl_replace_getopt=yes])
- fi
-
- dnl mingw's getopt (in libmingwex.a) does weird things when the options
- dnl strings starts with '+' and it's not the first call. Some internal state
- dnl is left over from earlier calls, and neither setting optind = 0 nor
- dnl setting optreset = 1 get rid of this internal state.
- dnl POSIX is silent on optind vs. optreset, so we allow either behavior.
- dnl POSIX 2008 does not specify leading '+' behavior, but see
- dnl http://austingroupbugs.net/view.php?id=191 for a recommendation on
- dnl the next version of POSIX. For now, we only guarantee leading '+'
- dnl behavior with getopt-gnu.
- if test -z "$gl_replace_getopt"; then
- AC_CACHE_CHECK([whether getopt is POSIX compatible],
- [gl_cv_func_getopt_posix],
- [
- dnl BSD getopt_long uses an incompatible method to reset option
- dnl processing. Existence of the optreset variable, in and of
- dnl itself, is not a reason to replace getopt, but knowledge
- dnl of the variable is needed to determine how to reset and
- dnl whether a reset reparses the environment. Solaris
- dnl supports neither optreset nor optind=0, but keeps no state
- dnl that needs a reset beyond setting optind=1; detect Solaris
- dnl by getopt_clip.
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <unistd.h>]],
- [[int *p = &optreset; return optreset;]])],
- [gl_optind_min=1],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <getopt.h>]],
- [[return !getopt_clip;]])],
- [gl_optind_min=1],
- [gl_optind_min=0])])
-
- dnl This test fails on mingw and succeeds on many other platforms.
- gl_save_CPPFLAGS=$CPPFLAGS
- CPPFLAGS="$CPPFLAGS -DOPTIND_MIN=$gl_optind_min"
- AC_RUN_IFELSE([AC_LANG_SOURCE([[
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-
-int
-main ()
-{
- {
- static char program[] = "program";
- static char a[] = "-a";
- static char foo[] = "foo";
- static char bar[] = "bar";
- char *argv[] = { program, a, foo, bar, NULL };
- int c;
-
- optind = OPTIND_MIN;
- opterr = 0;
-
- c = getopt (4, argv, "ab");
- if (!(c == 'a'))
- return 1;
- c = getopt (4, argv, "ab");
- if (!(c == -1))
- return 2;
- if (!(optind == 2))
- return 3;
- }
- /* Some internal state exists at this point. */
- {
- static char program[] = "program";
- static char donald[] = "donald";
- static char p[] = "-p";
- static char billy[] = "billy";
- static char duck[] = "duck";
- static char a[] = "-a";
- static char bar[] = "bar";
- char *argv[] = { program, donald, p, billy, duck, a, bar, NULL };
- int c;
-
- optind = OPTIND_MIN;
- opterr = 0;
-
- c = getopt (7, argv, "+abp:q:");
- if (!(c == -1))
- return 4;
- if (!(strcmp (argv[0], "program") == 0))
- return 5;
- if (!(strcmp (argv[1], "donald") == 0))
- return 6;
- if (!(strcmp (argv[2], "-p") == 0))
- return 7;
- if (!(strcmp (argv[3], "billy") == 0))
- return 8;
- if (!(strcmp (argv[4], "duck") == 0))
- return 9;
- if (!(strcmp (argv[5], "-a") == 0))
- return 10;
- if (!(strcmp (argv[6], "bar") == 0))
- return 11;
- if (!(optind == 1))
- return 12;
- }
- /* Detect MacOS 10.5, AIX 7.1 bug. */
- {
- static char program[] = "program";
- static char ab[] = "-ab";
- char *argv[3] = { program, ab, NULL };
- optind = OPTIND_MIN;
- opterr = 0;
- if (getopt (2, argv, "ab:") != 'a')
- return 13;
- if (getopt (2, argv, "ab:") != '?')
- return 14;
- if (optopt != 'b')
- return 15;
- if (optind != 2)
- return 16;
- }
-
- return 0;
-}
-]])],
- [gl_cv_func_getopt_posix=yes], [gl_cv_func_getopt_posix=no],
- [case "$host_os" in
- mingw*) gl_cv_func_getopt_posix="guessing no";;
- darwin* | aix*) gl_cv_func_getopt_posix="guessing no";;
- *) gl_cv_func_getopt_posix="guessing yes";;
- esac
- ])
- CPPFLAGS=$gl_save_CPPFLAGS
- ])
- case "$gl_cv_func_getopt_posix" in
- *no) gl_replace_getopt=yes ;;
- esac
- fi
-
- if test -z "$gl_replace_getopt" && test $gl_getopt_required = GNU; then
- AC_CACHE_CHECK([for working GNU getopt function], [gl_cv_func_getopt_gnu],
- [# Even with POSIXLY_CORRECT, the GNU extension of leading '-' in the
- # optstring is necessary for programs like m4 that have POSIX-mandated
- # semantics for supporting options interspersed with files.
- # Also, since getopt_long is a GNU extension, we require optind=0.
- # Bash ties 'set -o posix' to a non-exported POSIXLY_CORRECT;
- # so take care to revert to the correct (non-)export state.
-dnl GNU Coding Standards currently allow awk but not env; besides, env
-dnl is ambiguous with environment values that contain newlines.
- gl_awk_probe='BEGIN { if ("POSIXLY_CORRECT" in ENVIRON) print "x" }'
- case ${POSIXLY_CORRECT+x}`$AWK "$gl_awk_probe" </dev/null` in
- xx) gl_had_POSIXLY_CORRECT=exported ;;
- x) gl_had_POSIXLY_CORRECT=yes ;;
- *) gl_had_POSIXLY_CORRECT= ;;
- esac
- POSIXLY_CORRECT=1
- export POSIXLY_CORRECT
- AC_RUN_IFELSE(
- [AC_LANG_PROGRAM([[#include <getopt.h>
- #include <stddef.h>
- #include <string.h>
- ]GL_NOCRASH[
- ]], [[
- int result = 0;
-
- nocrash_init();
-
- /* This code succeeds on glibc 2.8, OpenBSD 4.0, Cygwin, mingw,
- and fails on MacOS X 10.5, AIX 5.2, HP-UX 11, IRIX 6.5,
- OSF/1 5.1, Solaris 10. */
- {
- static char conftest[] = "conftest";
- static char plus[] = "-+";
- char *argv[3] = { conftest, plus, NULL };
- opterr = 0;
- if (getopt (2, argv, "+a") != '?')
- result |= 1;
- }
- /* This code succeeds on glibc 2.8, mingw,
- and fails on MacOS X 10.5, OpenBSD 4.0, AIX 5.2, HP-UX 11,
- IRIX 6.5, OSF/1 5.1, Solaris 10, Cygwin 1.5.x. */
- {
- static char program[] = "program";
- static char p[] = "-p";
- static char foo[] = "foo";
- static char bar[] = "bar";
- char *argv[] = { program, p, foo, bar, NULL };
-
- optind = 1;
- if (getopt (4, argv, "p::") != 'p')
- result |= 2;
- else if (optarg != NULL)
- result |= 4;
- else if (getopt (4, argv, "p::") != -1)
- result |= 6;
- else if (optind != 2)
- result |= 8;
- }
- /* This code succeeds on glibc 2.8 and fails on Cygwin 1.7.0. */
- {
- static char program[] = "program";
- static char foo[] = "foo";
- static char p[] = "-p";
- char *argv[] = { program, foo, p, NULL };
- optind = 0;
- if (getopt (3, argv, "-p") != 1)
- result |= 16;
- else if (getopt (3, argv, "-p") != 'p')
- result |= 32;
- }
- /* This code fails on glibc 2.11. */
- {
- static char program[] = "program";
- static char b[] = "-b";
- static char a[] = "-a";
- char *argv[] = { program, b, a, NULL };
- optind = opterr = 0;
- if (getopt (3, argv, "+:a:b") != 'b')
- result |= 64;
- else if (getopt (3, argv, "+:a:b") != ':')
- result |= 64;
- }
- /* This code dumps core on glibc 2.14. */
- {
- static char program[] = "program";
- static char w[] = "-W";
- static char dummy[] = "dummy";
- char *argv[] = { program, w, dummy, NULL };
- optind = opterr = 1;
- if (getopt (3, argv, "W;") != 'W')
- result |= 128;
- }
- return result;
- ]])],
- [gl_cv_func_getopt_gnu=yes],
- [gl_cv_func_getopt_gnu=no],
- [dnl Cross compiling. Guess based on host and declarations.
- case $host_os:$ac_cv_have_decl_optreset in
- *-gnu*:* | mingw*:*) gl_cv_func_getopt_gnu=no;;
- *:yes) gl_cv_func_getopt_gnu=no;;
- *) gl_cv_func_getopt_gnu=yes;;
- esac
- ])
- case $gl_had_POSIXLY_CORRECT in
- exported) ;;
- yes) AS_UNSET([POSIXLY_CORRECT]); POSIXLY_CORRECT=1 ;;
- *) AS_UNSET([POSIXLY_CORRECT]) ;;
- esac
- ])
- if test "$gl_cv_func_getopt_gnu" = "no"; then
- gl_replace_getopt=yes
- fi
- fi
-])
-
-# emacs' configure.in uses this.
-AC_DEFUN([gl_GETOPT_SUBSTITUTE_HEADER],
-[
- GETOPT_H=getopt.h
- AC_DEFINE([__GETOPT_PREFIX], [[rpl_]],
- [Define to rpl_ if the getopt replacement functions and variables
- should be used.])
- AC_SUBST([GETOPT_H])
-])
-
-# Prerequisites of lib/getopt*.
-# emacs' configure.in uses this.
-AC_DEFUN([gl_PREREQ_GETOPT],
-[
- AC_CHECK_DECLS_ONCE([getenv])
-])
+++ /dev/null
-# gettext.m4 serial 64 (gettext-0.18.2)
-dnl Copyright (C) 1995-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
-
-dnl Macro to add for using GNU gettext.
-
-dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
-dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
-dnl default (if it is not specified or empty) is 'no-libtool'.
-dnl INTLSYMBOL should be 'external' for packages with no intl directory,
-dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
-dnl If INTLSYMBOL is 'use-libtool', then a libtool library
-dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
-dnl depending on --{enable,disable}-{shared,static} and on the presence of
-dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
-dnl $(top_builddir)/intl/libintl.a will be created.
-dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
-dnl implementations (in libc or libintl) without the ngettext() function
-dnl will be ignored. If NEEDSYMBOL is specified and is
-dnl 'need-formatstring-macros', then GNU gettext implementations that don't
-dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
-dnl INTLDIR is used to find the intl libraries. If empty,
-dnl the value '$(top_builddir)/intl/' is used.
-dnl
-dnl The result of the configuration is one of three cases:
-dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
-dnl and used.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 2) GNU gettext has been found in the system's C library.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 3) No internationalization, always use English msgid.
-dnl Catalog format: none
-dnl Catalog extension: none
-dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
-dnl The use of .gmo is historical (it was needed to avoid overwriting the
-dnl GNU format catalogs when building on a platform with an X/Open gettext),
-dnl but we keep it in order not to force irrelevant filename changes on the
-dnl maintainers.
-dnl
-AC_DEFUN([AM_GNU_GETTEXT],
-[
- dnl Argument checking.
- ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
- [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
-])])])])])
- ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
- [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])])
- ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
- [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
-])])])])
- define([gt_included_intl],
- ifelse([$1], [external],
- ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
- [yes]))
- define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
- gt_NEEDS_INIT
- AM_GNU_GETTEXT_NEED([$2])
-
- AC_REQUIRE([AM_PO_SUBDIRS])dnl
- ifelse(gt_included_intl, yes, [
- AC_REQUIRE([AM_INTL_SUBDIR])dnl
- ])
-
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- dnl Ideally we would do this search only after the
- dnl if test "$USE_NLS" = "yes"; then
- dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
- dnl the configure script would need to contain the same shell code
- dnl again, outside any 'if'. There are two solutions:
- dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
- dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
- dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
- dnl documented, we avoid it.
- ifelse(gt_included_intl, yes, , [
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
- ])
-
- dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation.
- gt_INTL_MACOSX
-
- dnl Set USE_NLS.
- AC_REQUIRE([AM_NLS])
-
- ifelse(gt_included_intl, yes, [
- BUILD_INCLUDED_LIBINTL=no
- USE_INCLUDED_LIBINTL=no
- ])
- LIBINTL=
- LTLIBINTL=
- POSUB=
-
- dnl Add a version number to the cache macros.
- case " $gt_needs " in
- *" need-formatstring-macros "*) gt_api_version=3 ;;
- *" need-ngettext "*) gt_api_version=2 ;;
- *) gt_api_version=1 ;;
- esac
- gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
- gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- gt_use_preinstalled_gnugettext=no
- ifelse(gt_included_intl, yes, [
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH([included-gettext],
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- ])
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If GNU gettext is available we use this. Else we have
- dnl to fall back to GNU NLS library.
-
- if test $gt_api_version -ge 3; then
- gt_revision_test_code='
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-#endif
-changequote(,)dnl
-typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-changequote([,])dnl
-'
- else
- gt_revision_test_code=
- fi
- if test $gt_api_version -ge 2; then
- gt_expression_test_code=' + * ngettext ("", "", 0)'
- else
- gt_expression_test_code=
- fi
-
- AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
- [AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern int *_nl_domain_bindings;
- ]],
- [[
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
- ]])],
- [eval "$gt_func_gnugettext_libc=yes"],
- [eval "$gt_func_gnugettext_libc=no"])])
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- ifelse(gt_included_intl, yes, , [
- AM_ICONV_LINK
- ])
- dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
- dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
- dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
- dnl even if libiconv doesn't exist.
- AC_LIB_LINKFLAGS_BODY([intl])
- AC_CACHE_CHECK([for GNU gettext in libintl],
- [$gt_func_gnugettext_libintl],
- [gt_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $INCINTL"
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBINTL"
- dnl Now see whether libintl exists and does not depend on libiconv.
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
- ]],
- [[
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ]])],
- [eval "$gt_func_gnugettext_libintl=yes"],
- [eval "$gt_func_gnugettext_libintl=no"])
- dnl Now see whether libintl exists and depends on libiconv.
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
- LIBS="$LIBS $LIBICONV"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
- ]],
- [[
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ]])],
- [LIBINTL="$LIBINTL $LIBICONV"
- LTLIBINTL="$LTLIBINTL $LTLIBICONV"
- eval "$gt_func_gnugettext_libintl=yes"
- ])
- fi
- CPPFLAGS="$gt_save_CPPFLAGS"
- LIBS="$gt_save_LIBS"])
- fi
-
- dnl If an already present or preinstalled GNU gettext() is found,
- dnl use it. But if this macro is used in GNU gettext, and GNU
- dnl gettext is already preinstalled in libintl, we update this
- dnl libintl. (Cf. the install rule in intl/Makefile.in.)
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
- || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
- && test "$PACKAGE" != gettext-runtime \
- && test "$PACKAGE" != gettext-tools; }; then
- gt_use_preinstalled_gnugettext=yes
- else
- dnl Reset the values set by searching for libintl.
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- fi
-
- ifelse(gt_included_intl, yes, [
- if test "$gt_use_preinstalled_gnugettext" != "yes"; then
- dnl GNU gettext is not found in the C library.
- dnl Fall back on included GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- BUILD_INCLUDED_LIBINTL=yes
- USE_INCLUDED_LIBINTL=yes
- LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
- LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
- LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
- fi
-
- CATOBJEXT=
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions to use GNU gettext tools.
- CATOBJEXT=.gmo
- fi
- ])
-
- if test -n "$INTL_MACOSX_LIBS"; then
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Some extra flags are needed during linking.
- LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
- LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
- fi
- fi
-
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- AC_DEFINE([ENABLE_NLS], [1],
- [Define to 1 if translation of program messages to the user's native language
- is requested.])
- else
- USE_NLS=no
- fi
- fi
-
- AC_MSG_CHECKING([whether to use NLS])
- AC_MSG_RESULT([$USE_NLS])
- if test "$USE_NLS" = "yes"; then
- AC_MSG_CHECKING([where the gettext function comes from])
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- gt_source="external libintl"
- else
- gt_source="libc"
- fi
- else
- gt_source="included intl directory"
- fi
- AC_MSG_RESULT([$gt_source])
- fi
-
- if test "$USE_NLS" = "yes"; then
-
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- AC_MSG_CHECKING([how to link with libintl])
- AC_MSG_RESULT([$LIBINTL])
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
- fi
-
- dnl For backward compatibility. Some packages may be using this.
- AC_DEFINE([HAVE_GETTEXT], [1],
- [Define if the GNU gettext() function is already present or preinstalled.])
- AC_DEFINE([HAVE_DCGETTEXT], [1],
- [Define if the GNU dcgettext() function is already present or preinstalled.])
- fi
-
- dnl We need to process the po/ directory.
- POSUB=po
- fi
-
- ifelse(gt_included_intl, yes, [
- dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
- dnl to 'yes' because some of the testsuite requires it.
- if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
- BUILD_INCLUDED_LIBINTL=yes
- fi
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST([BUILD_INCLUDED_LIBINTL])
- AC_SUBST([USE_INCLUDED_LIBINTL])
- AC_SUBST([CATOBJEXT])
-
- dnl For backward compatibility. Some configure.ins may be using this.
- nls_cv_header_intl=
- nls_cv_header_libgt=
-
- dnl For backward compatibility. Some Makefiles may be using this.
- DATADIRNAME=share
- AC_SUBST([DATADIRNAME])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INSTOBJEXT=.mo
- AC_SUBST([INSTOBJEXT])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- GENCAT=gencat
- AC_SUBST([GENCAT])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INTLOBJS=
- if test "$USE_INCLUDED_LIBINTL" = yes; then
- INTLOBJS="\$(GETTOBJS)"
- fi
- AC_SUBST([INTLOBJS])
-
- dnl Enable libtool support if the surrounding package wishes it.
- INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
- AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX])
- ])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INTLLIBS="$LIBINTL"
- AC_SUBST([INTLLIBS])
-
- dnl Make all documented variables known to autoconf.
- AC_SUBST([LIBINTL])
- AC_SUBST([LTLIBINTL])
- AC_SUBST([POSUB])
-])
-
-
-dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
-m4_define([gt_NEEDS_INIT],
-[
- m4_divert_text([DEFAULTS], [gt_needs=])
- m4_define([gt_NEEDS_INIT], [])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
-AC_DEFUN([AM_GNU_GETTEXT_NEED],
-[
- m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
-AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
+++ /dev/null
-# glibc21.m4 serial 5
-dnl Copyright (C) 2000-2002, 2004, 2008, 2010-2012 Free Software Foundation,
-dnl Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-# Test for the GNU C Library, version 2.1 or newer, or uClibc.
-# From Bruno Haible.
-
-AC_DEFUN([gl_GLIBC21],
- [
- AC_CACHE_CHECK([whether we are using the GNU C Library >= 2.1 or uClibc],
- [ac_cv_gnu_library_2_1],
- [AC_EGREP_CPP([Lucky],
- [
-#include <features.h>
-#ifdef __GNU_LIBRARY__
- #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
- Lucky GNU user
- #endif
-#endif
-#ifdef __UCLIBC__
- Lucky user
-#endif
- ],
- [ac_cv_gnu_library_2_1=yes],
- [ac_cv_gnu_library_2_1=no])
- ]
- )
- AC_SUBST([GLIBC21])
- GLIBC21="$ac_cv_gnu_library_2_1"
- ]
-)
+++ /dev/null
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This file is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this file. If not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License,
-# this file may be distributed as part of a program that
-# contains a configuration script generated by Autoconf, under
-# the same distribution terms as the rest of that program.
-#
-# Generated by gnulib-tool.
-#
-# This file represents the specification of how gnulib-tool is used.
-# It acts as a cache: It is written and read by gnulib-tool.
-# In projects that use version control, this file is meant to be put under
-# version control, like the configure.ac and various Makefile.am files.
-
-
-# Specification in the form of a command-line invocation:
-# gnulib-tool --import --dir=. --local-dir=gl --lib=libhello --source-base=lib --m4-base=m4 --doc-base=doc --tests-base=tests --aux-dir=build-aux --no-conditional-dependencies --no-libtool --macro-prefix=gl announce-gen closeout do-release-commit-and-tag fdl gendocs getopt-gnu gettext gnupload maintainer-makefile progname readme-release
-
-# Specification in the form of a few gnulib-tool.m4 macro invocations:
-gl_LOCAL_DIR([gl])
-gl_MODULES([
- announce-gen
- closeout
- do-release-commit-and-tag
- fdl
- gendocs
- getopt-gnu
- gettext
- gnupload
- maintainer-makefile
- progname
- readme-release
-])
-gl_AVOID([])
-gl_SOURCE_BASE([lib])
-gl_M4_BASE([m4])
-gl_PO_BASE([])
-gl_DOC_BASE([doc])
-gl_TESTS_BASE([tests])
-gl_LIB([libhello])
-gl_MAKEFILE_NAME([])
-gl_MACRO_PREFIX([gl])
-gl_PO_DOMAIN([])
-gl_WITNESS_C_DOMAIN([])
+++ /dev/null
-# gnulib-common.m4 serial 32
-dnl Copyright (C) 2007-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-# gl_COMMON
-# is expanded unconditionally through gnulib-tool magic.
-AC_DEFUN([gl_COMMON], [
- dnl Use AC_REQUIRE here, so that the code is expanded once only.
- AC_REQUIRE([gl_00GNULIB])
- AC_REQUIRE([gl_COMMON_BODY])
-])
-AC_DEFUN([gl_COMMON_BODY], [
- AH_VERBATIM([_Noreturn],
-[/* The _Noreturn keyword of C11. */
-#ifndef _Noreturn
-# if (3 <= __GNUC__ || (__GNUC__ == 2 && 8 <= __GNUC_MINOR__) \
- || 0x5110 <= __SUNPRO_C)
-# define _Noreturn __attribute__ ((__noreturn__))
-# elif defined _MSC_VER && 1200 <= _MSC_VER
-# define _Noreturn __declspec (noreturn)
-# else
-# define _Noreturn
-# endif
-#endif
-])
- AH_VERBATIM([isoc99_inline],
-[/* Work around a bug in Apple GCC 4.0.1 build 5465: In C99 mode, it supports
- the ISO C 99 semantics of 'extern inline' (unlike the GNU C semantics of
- earlier versions), but does not display it by setting __GNUC_STDC_INLINE__.
- __APPLE__ && __MACH__ test for MacOS X.
- __APPLE_CC__ tests for the Apple compiler and its version.
- __STDC_VERSION__ tests for the C99 mode. */
-#if defined __APPLE__ && defined __MACH__ && __APPLE_CC__ >= 5465 && !defined __cplusplus && __STDC_VERSION__ >= 199901L && !defined __GNUC_STDC_INLINE__
-# define __GNUC_STDC_INLINE__ 1
-#endif])
- AH_VERBATIM([unused_parameter],
-[/* Define as a marker that can be attached to declarations that might not
- be used. This helps to reduce warnings, such as from
- GCC -Wunused-parameter. */
-#if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7)
-# define _GL_UNUSED __attribute__ ((__unused__))
-#else
-# define _GL_UNUSED
-#endif
-/* The name _UNUSED_PARAMETER_ is an earlier spelling, although the name
- is a misnomer outside of parameter lists. */
-#define _UNUSED_PARAMETER_ _GL_UNUSED
-
-/* The __pure__ attribute was added in gcc 2.96. */
-#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96)
-# define _GL_ATTRIBUTE_PURE __attribute__ ((__pure__))
-#else
-# define _GL_ATTRIBUTE_PURE /* empty */
-#endif
-
-/* The __const__ attribute was added in gcc 2.95. */
-#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
-# define _GL_ATTRIBUTE_CONST __attribute__ ((__const__))
-#else
-# define _GL_ATTRIBUTE_CONST /* empty */
-#endif
-])
- dnl Preparation for running test programs:
- dnl Tell glibc to write diagnostics from -D_FORTIFY_SOURCE=2 to stderr, not
- dnl to /dev/tty, so they can be redirected to log files. Such diagnostics
- dnl arise e.g., in the macros gl_PRINTF_DIRECTIVE_N, gl_SNPRINTF_DIRECTIVE_N.
- LIBC_FATAL_STDERR_=1
- export LIBC_FATAL_STDERR_
-])
-
-# gl_MODULE_INDICATOR_CONDITION
-# expands to a C preprocessor expression that evaluates to 1 or 0, depending
-# whether a gnulib module that has been requested shall be considered present
-# or not.
-m4_define([gl_MODULE_INDICATOR_CONDITION], [1])
-
-# gl_MODULE_INDICATOR_SET_VARIABLE([modulename])
-# sets the shell variable that indicates the presence of the given module to
-# a C preprocessor expression that will evaluate to 1.
-AC_DEFUN([gl_MODULE_INDICATOR_SET_VARIABLE],
-[
- gl_MODULE_INDICATOR_SET_VARIABLE_AUX(
- [GNULIB_[]m4_translit([[$1]],
- [abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])],
- [gl_MODULE_INDICATOR_CONDITION])
-])
-
-# gl_MODULE_INDICATOR_SET_VARIABLE_AUX([variable])
-# modifies the shell variable to include the gl_MODULE_INDICATOR_CONDITION.
-# The shell variable's value is a C preprocessor expression that evaluates
-# to 0 or 1.
-AC_DEFUN([gl_MODULE_INDICATOR_SET_VARIABLE_AUX],
-[
- m4_if(m4_defn([gl_MODULE_INDICATOR_CONDITION]), [1],
- [
- dnl Simplify the expression VALUE || 1 to 1.
- $1=1
- ],
- [gl_MODULE_INDICATOR_SET_VARIABLE_AUX_OR([$1],
- [gl_MODULE_INDICATOR_CONDITION])])
-])
-
-# gl_MODULE_INDICATOR_SET_VARIABLE_AUX_OR([variable], [condition])
-# modifies the shell variable to include the given condition. The shell
-# variable's value is a C preprocessor expression that evaluates to 0 or 1.
-AC_DEFUN([gl_MODULE_INDICATOR_SET_VARIABLE_AUX_OR],
-[
- dnl Simplify the expression 1 || CONDITION to 1.
- if test "$[]$1" != 1; then
- dnl Simplify the expression 0 || CONDITION to CONDITION.
- if test "$[]$1" = 0; then
- $1=$2
- else
- $1="($[]$1 || $2)"
- fi
- fi
-])
-
-# gl_MODULE_INDICATOR([modulename])
-# defines a C macro indicating the presence of the given module
-# in a location where it can be used.
-# | Value | Value |
-# | in lib/ | in tests/ |
-# --------------------------------------------+---------+-----------+
-# Module present among main modules: | 1 | 1 |
-# --------------------------------------------+---------+-----------+
-# Module present among tests-related modules: | 0 | 1 |
-# --------------------------------------------+---------+-----------+
-# Module not present at all: | 0 | 0 |
-# --------------------------------------------+---------+-----------+
-AC_DEFUN([gl_MODULE_INDICATOR],
-[
- AC_DEFINE_UNQUOTED([GNULIB_]m4_translit([[$1]],
- [abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___]),
- [gl_MODULE_INDICATOR_CONDITION],
- [Define to a C preprocessor expression that evaluates to 1 or 0,
- depending whether the gnulib module $1 shall be considered present.])
-])
-
-# gl_MODULE_INDICATOR_FOR_TESTS([modulename])
-# defines a C macro indicating the presence of the given module
-# in lib or tests. This is useful to determine whether the module
-# should be tested.
-# | Value | Value |
-# | in lib/ | in tests/ |
-# --------------------------------------------+---------+-----------+
-# Module present among main modules: | 1 | 1 |
-# --------------------------------------------+---------+-----------+
-# Module present among tests-related modules: | 1 | 1 |
-# --------------------------------------------+---------+-----------+
-# Module not present at all: | 0 | 0 |
-# --------------------------------------------+---------+-----------+
-AC_DEFUN([gl_MODULE_INDICATOR_FOR_TESTS],
-[
- AC_DEFINE([GNULIB_TEST_]m4_translit([[$1]],
- [abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___]), [1],
- [Define to 1 when the gnulib module $1 should be tested.])
-])
-
-# gl_ASSERT_NO_GNULIB_POSIXCHECK
-# asserts that there will never be a need to #define GNULIB_POSIXCHECK.
-# and thereby enables an optimization of configure and config.h.
-# Used by Emacs.
-AC_DEFUN([gl_ASSERT_NO_GNULIB_POSIXCHECK],
-[
- dnl Override gl_WARN_ON_USE_PREPARE.
- dnl But hide this definition from 'aclocal'.
- AC_DEFUN([gl_W][ARN_ON_USE_PREPARE], [])
-])
-
-# gl_ASSERT_NO_GNULIB_TESTS
-# asserts that there will be no gnulib tests in the scope of the configure.ac
-# and thereby enables an optimization of config.h.
-# Used by Emacs.
-AC_DEFUN([gl_ASSERT_NO_GNULIB_TESTS],
-[
- dnl Override gl_MODULE_INDICATOR_FOR_TESTS.
- AC_DEFUN([gl_MODULE_INDICATOR_FOR_TESTS], [])
-])
-
-# Test whether <features.h> exists.
-# Set HAVE_FEATURES_H.
-AC_DEFUN([gl_FEATURES_H],
-[
- AC_CHECK_HEADERS_ONCE([features.h])
- if test $ac_cv_header_features_h = yes; then
- HAVE_FEATURES_H=1
- else
- HAVE_FEATURES_H=0
- fi
- AC_SUBST([HAVE_FEATURES_H])
-])
-
-# m4_foreach_w
-# is a backport of autoconf-2.59c's m4_foreach_w.
-# Remove this macro when we can assume autoconf >= 2.60.
-m4_ifndef([m4_foreach_w],
- [m4_define([m4_foreach_w],
- [m4_foreach([$1], m4_split(m4_normalize([$2]), [ ]), [$3])])])
-
-# AS_VAR_IF(VAR, VALUE, [IF-MATCH], [IF-NOT-MATCH])
-# ----------------------------------------------------
-# Backport of autoconf-2.63b's macro.
-# Remove this macro when we can assume autoconf >= 2.64.
-m4_ifndef([AS_VAR_IF],
-[m4_define([AS_VAR_IF],
-[AS_IF([test x"AS_VAR_GET([$1])" = x""$2], [$3], [$4])])])
-
-# gl_PROG_CC_C99
-# Modifies the value of the shell variable CC in an attempt to make $CC
-# understand ISO C99 source code.
-# This is like AC_PROG_CC_C99, except that
-# - AC_PROG_CC_C99 did not exist in Autoconf versions < 2.60,
-# - AC_PROG_CC_C99 does not mix well with AC_PROG_CC_STDC
-# <http://lists.gnu.org/archive/html/bug-gnulib/2011-09/msg00367.html>,
-# but many more packages use AC_PROG_CC_STDC than AC_PROG_CC_C99
-# <http://lists.gnu.org/archive/html/bug-gnulib/2011-09/msg00441.html>.
-# Remaining problems:
-# - When AC_PROG_CC_STDC is invoked twice, it adds the C99 enabling options
-# to CC twice
-# <http://lists.gnu.org/archive/html/bug-gnulib/2011-09/msg00431.html>.
-# - AC_PROG_CC_STDC is likely to change now that C11 is an ISO standard.
-AC_DEFUN([gl_PROG_CC_C99],
-[
- dnl Change that version number to the minimum Autoconf version that supports
- dnl mixing AC_PROG_CC_C99 calls with AC_PROG_CC_STDC calls.
- m4_version_prereq([9.0],
- [AC_REQUIRE([AC_PROG_CC_C99])],
- [AC_REQUIRE([AC_PROG_CC_STDC])])
-])
-
-# gl_PROG_AR_RANLIB
-# Determines the values for AR, ARFLAGS, RANLIB that fit with the compiler.
-# The user can set the variables AR, ARFLAGS, RANLIB if he wants to override
-# the values.
-AC_DEFUN([gl_PROG_AR_RANLIB],
-[
- dnl Minix 3 comes with two toolchains: The Amsterdam Compiler Kit compiler
- dnl as "cc", and GCC as "gcc". They have different object file formats and
- dnl library formats. In particular, the GNU binutils programs ar, ranlib
- dnl produce libraries that work only with gcc, not with cc.
- AC_REQUIRE([AC_PROG_CC])
- AC_CACHE_CHECK([for Minix Amsterdam compiler], [gl_cv_c_amsterdam_compiler],
- [
- AC_EGREP_CPP([Amsterdam],
- [
-#ifdef __ACK__
-Amsterdam
-#endif
- ],
- [gl_cv_c_amsterdam_compiler=yes],
- [gl_cv_c_amsterdam_compiler=no])
- ])
- if test -z "$AR"; then
- if test $gl_cv_c_amsterdam_compiler = yes; then
- AR='cc -c.a'
- if test -z "$ARFLAGS"; then
- ARFLAGS='-o'
- fi
- else
- dnl Use the Automake-documented default values for AR and ARFLAGS,
- dnl but prefer ${host}-ar over ar (useful for cross-compiling).
- AC_CHECK_TOOL([AR], [ar], [ar])
- if test -z "$ARFLAGS"; then
- ARFLAGS='cru'
- fi
- fi
- else
- if test -z "$ARFLAGS"; then
- ARFLAGS='cru'
- fi
- fi
- AC_SUBST([AR])
- AC_SUBST([ARFLAGS])
- if test -z "$RANLIB"; then
- if test $gl_cv_c_amsterdam_compiler = yes; then
- RANLIB=':'
- else
- dnl Use the ranlib program if it is available.
- AC_PROG_RANLIB
- fi
- fi
- AC_SUBST([RANLIB])
-])
-
-# AC_PROG_MKDIR_P
-# is a backport of autoconf-2.60's AC_PROG_MKDIR_P, with a fix
-# for interoperability with automake-1.9.6 from autoconf-2.62.
-# Remove this macro when we can assume autoconf >= 2.62 or
-# autoconf >= 2.60 && automake >= 1.10.
-m4_ifdef([AC_PROG_MKDIR_P], [
- dnl For automake-1.9.6 && autoconf < 2.62: Ensure MKDIR_P is AC_SUBSTed.
- m4_define([AC_PROG_MKDIR_P],
- m4_defn([AC_PROG_MKDIR_P])[
- AC_SUBST([MKDIR_P])])], [
- dnl For autoconf < 2.60: Backport of AC_PROG_MKDIR_P.
- AC_DEFUN_ONCE([AC_PROG_MKDIR_P],
- [AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake
- MKDIR_P='$(mkdir_p)'
- AC_SUBST([MKDIR_P])])])
-
-# AC_C_RESTRICT
-# This definition overrides the AC_C_RESTRICT macro from autoconf 2.60..2.61,
-# so that mixed use of GNU C and GNU C++ and mixed use of Sun C and Sun C++
-# works.
-# This definition can be removed once autoconf >= 2.62 can be assumed.
-m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.62]),[-1],[
-AC_DEFUN([AC_C_RESTRICT],
-[AC_CACHE_CHECK([for C/C++ restrict keyword], [ac_cv_c_restrict],
- [ac_cv_c_restrict=no
- # The order here caters to the fact that C++ does not require restrict.
- for ac_kw in __restrict __restrict__ _Restrict restrict; do
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
- [[typedef int * int_ptr;
- int foo (int_ptr $ac_kw ip) {
- return ip[0];
- }]],
- [[int s[1];
- int * $ac_kw t = s;
- t[0] = 0;
- return foo(t)]])],
- [ac_cv_c_restrict=$ac_kw])
- test "$ac_cv_c_restrict" != no && break
- done
- ])
- AH_VERBATIM([restrict],
-[/* Define to the equivalent of the C99 'restrict' keyword, or to
- nothing if this is not supported. Do not define if restrict is
- supported directly. */
-#undef restrict
-/* Work around a bug in Sun C++: it does not support _Restrict, even
- though the corresponding Sun C compiler does, which causes
- "#define restrict _Restrict" in the previous line. Perhaps some future
- version of Sun C++ will work with _Restrict; if so, it'll probably
- define __RESTRICT, just as Sun C does. */
-#if defined __SUNPRO_CC && !defined __RESTRICT
-# define _Restrict
-#endif])
- case $ac_cv_c_restrict in
- restrict) ;;
- no) AC_DEFINE([restrict], []) ;;
- *) AC_DEFINE_UNQUOTED([restrict], [$ac_cv_c_restrict]) ;;
- esac
-])
-])
-
-# gl_BIGENDIAN
-# is like AC_C_BIGENDIAN, except that it can be AC_REQUIREd.
-# Note that AC_REQUIRE([AC_C_BIGENDIAN]) does not work reliably because some
-# macros invoke AC_C_BIGENDIAN with arguments.
-AC_DEFUN([gl_BIGENDIAN],
-[
- AC_C_BIGENDIAN
-])
-
-# gl_CACHE_VAL_SILENT(cache-id, command-to-set-it)
-# is like AC_CACHE_VAL(cache-id, command-to-set-it), except that it does not
-# output a spurious "(cached)" mark in the midst of other configure output.
-# This macro should be used instead of AC_CACHE_VAL when it is not surrounded
-# by an AC_MSG_CHECKING/AC_MSG_RESULT pair.
-AC_DEFUN([gl_CACHE_VAL_SILENT],
-[
- saved_as_echo_n="$as_echo_n"
- as_echo_n=':'
- AC_CACHE_VAL([$1], [$2])
- as_echo_n="$saved_as_echo_n"
-])
+++ /dev/null
-# DO NOT EDIT! GENERATED AUTOMATICALLY!
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This file is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this file. If not, see <http://www.gnu.org/licenses/>.
-#
-# As a special exception to the GNU General Public License,
-# this file may be distributed as part of a program that
-# contains a configuration script generated by Autoconf, under
-# the same distribution terms as the rest of that program.
-#
-# Generated by gnulib-tool.
-#
-# This file represents the compiled summary of the specification in
-# gnulib-cache.m4. It lists the computed macro invocations that need
-# to be invoked from configure.ac.
-# In projects that use version control, this file can be treated like
-# other built files.
-
-
-# This macro should be invoked from ./configure.ac, in the section
-# "Checks for programs", right after AC_PROG_CC, and certainly before
-# any checks for libraries, header files, types and library functions.
-AC_DEFUN([gl_EARLY],
-[
- m4_pattern_forbid([^gl_[A-Z]])dnl the gnulib macro namespace
- m4_pattern_allow([^gl_ES$])dnl a valid locale name
- m4_pattern_allow([^gl_LIBOBJS$])dnl a variable
- m4_pattern_allow([^gl_LTLIBOBJS$])dnl a variable
- AC_REQUIRE([gl_PROG_AR_RANLIB])
- # Code from module announce-gen:
- # Code from module c-ctype:
- # Code from module c-strcase:
- # Code from module c-strcaseeq:
- # Code from module close-stream:
- # Code from module closeout:
- # Code from module configmake:
- # Code from module do-release-commit-and-tag:
- # Code from module errno:
- # Code from module error:
- # Code from module exitfail:
- # Code from module extensions:
- AC_REQUIRE([gl_USE_SYSTEM_EXTENSIONS])
- # Code from module fdl:
- # Code from module fpending:
- # Code from module gendocs:
- # Code from module getopt-gnu:
- # Code from module getopt-posix:
- # Code from module gettext:
- # Code from module gettext-h:
- # Code from module gnumakefile:
- # Code from module gnupload:
- # Code from module havelib:
- # Code from module include_next:
- # Code from module inline:
- # Code from module intprops:
- # Code from module localcharset:
- # Code from module maintainer-makefile:
- # Code from module mbrtowc:
- # Code from module mbsinit:
- # Code from module msvc-inval:
- # Code from module msvc-nothrow:
- # Code from module nocrash:
- # Code from module progname:
- # Code from module quotearg:
- # Code from module quotearg-simple:
- # Code from module readme-release:
- # Code from module snippet/_Noreturn:
- # Code from module snippet/arg-nonnull:
- # Code from module snippet/c++defs:
- # Code from module snippet/warn-on-use:
- # Code from module ssize_t:
- # Code from module stdbool:
- # Code from module stddef:
- # Code from module stdlib:
- # Code from module streq:
- # Code from module strerror:
- # Code from module strerror-override:
- # Code from module string:
- # Code from module unistd:
- # Code from module useless-if-before-free:
- # Code from module vc-list-files:
- # Code from module verify:
- # Code from module wchar:
- # Code from module wctype-h:
- # Code from module xalloc:
- # Code from module xalloc-die:
- # Code from module xalloc-oversized:
-])
-
-# This macro should be invoked from ./configure.ac, in the section
-# "Check for header files, types and library functions".
-AC_DEFUN([gl_INIT],
-[
- AM_CONDITIONAL([GL_COND_LIBTOOL], [false])
- gl_cond_libtool=false
- gl_libdeps=
- gl_ltlibdeps=
- gl_m4_base='m4'
- m4_pushdef([AC_LIBOBJ], m4_defn([gl_LIBOBJ]))
- m4_pushdef([AC_REPLACE_FUNCS], m4_defn([gl_REPLACE_FUNCS]))
- m4_pushdef([AC_LIBSOURCES], m4_defn([gl_LIBSOURCES]))
- m4_pushdef([gl_LIBSOURCES_LIST], [])
- m4_pushdef([gl_LIBSOURCES_DIR], [])
- gl_COMMON
- gl_source_base='lib'
-gl_CLOSE_STREAM
-gl_MODULE_INDICATOR([close-stream])
-gl_CLOSEOUT
-gl_CONFIGMAKE_PREP
-gl_HEADER_ERRNO_H
-gl_ERROR
-if test $ac_cv_lib_error_at_line = no; then
- AC_LIBOBJ([error])
- gl_PREREQ_ERROR
-fi
-m4_ifdef([AM_XGETTEXT_OPTION],
- [AM_][XGETTEXT_OPTION([--flag=error:3:c-format])
- AM_][XGETTEXT_OPTION([--flag=error_at_line:5:c-format])])
-gl_FUNC_FPENDING
-if test $ac_cv_func___fpending = no; then
- AC_LIBOBJ([fpending])
- gl_PREREQ_FPENDING
-fi
-gl_FUNC_GETOPT_GNU
-if test $REPLACE_GETOPT = 1; then
- AC_LIBOBJ([getopt])
- AC_LIBOBJ([getopt1])
- gl_PREREQ_GETOPT
- dnl Arrange for unistd.h to include getopt.h.
- GNULIB_GL_UNISTD_H_GETOPT=1
-fi
-AC_SUBST([GNULIB_GL_UNISTD_H_GETOPT])
-gl_MODULE_INDICATOR_FOR_TESTS([getopt-gnu])
-gl_FUNC_GETOPT_POSIX
-if test $REPLACE_GETOPT = 1; then
- AC_LIBOBJ([getopt])
- AC_LIBOBJ([getopt1])
- gl_PREREQ_GETOPT
- dnl Arrange for unistd.h to include getopt.h.
- GNULIB_GL_UNISTD_H_GETOPT=1
-fi
-AC_SUBST([GNULIB_GL_UNISTD_H_GETOPT])
-dnl you must add AM_GNU_GETTEXT([external]) or similar to configure.ac.
-AM_GNU_GETTEXT_VERSION([0.18.1])
-AC_SUBST([LIBINTL])
-AC_SUBST([LTLIBINTL])
-# Autoconf 2.61a.99 and earlier don't support linking a file only
-# in VPATH builds. But since GNUmakefile is for maintainer use
-# only, it does not matter if we skip the link with older autoconf.
-# Automake 1.10.1 and earlier try to remove GNUmakefile in non-VPATH
-# builds, so use a shell variable to bypass this.
-GNUmakefile=GNUmakefile
-m4_if(m4_version_compare([2.61a.100],
- m4_defn([m4_PACKAGE_VERSION])), [1], [],
- [AC_CONFIG_LINKS([$GNUmakefile:$GNUmakefile], [],
- [GNUmakefile=$GNUmakefile])])
-gl_INLINE
-gl_LOCALCHARSET
-LOCALCHARSET_TESTS_ENVIRONMENT="CHARSETALIASDIR=\"\$(abs_top_builddir)/$gl_source_base\""
-AC_SUBST([LOCALCHARSET_TESTS_ENVIRONMENT])
-AC_CONFIG_COMMANDS_PRE([m4_ifdef([AH_HEADER],
- [AC_SUBST([CONFIG_INCLUDE], m4_defn([AH_HEADER]))])])
-gl_FUNC_MBRTOWC
-if test $HAVE_MBRTOWC = 0 || test $REPLACE_MBRTOWC = 1; then
- AC_LIBOBJ([mbrtowc])
- gl_PREREQ_MBRTOWC
-fi
-gl_WCHAR_MODULE_INDICATOR([mbrtowc])
-gl_FUNC_MBSINIT
-if test $HAVE_MBSINIT = 0 || test $REPLACE_MBSINIT = 1; then
- AC_LIBOBJ([mbsinit])
- gl_PREREQ_MBSINIT
-fi
-gl_WCHAR_MODULE_INDICATOR([mbsinit])
-gl_MSVC_INVAL
-if test $HAVE_MSVC_INVALID_PARAMETER_HANDLER = 1; then
- AC_LIBOBJ([msvc-inval])
-fi
-gl_MSVC_NOTHROW
-if test $HAVE_MSVC_INVALID_PARAMETER_HANDLER = 1; then
- AC_LIBOBJ([msvc-nothrow])
-fi
-AC_CHECK_DECLS([program_invocation_name], [], [], [#include <errno.h>])
-AC_CHECK_DECLS([program_invocation_short_name], [], [], [#include <errno.h>])
-gl_QUOTEARG
-gt_TYPE_SSIZE_T
-AM_STDBOOL_H
-gl_STDDEF_H
-gl_STDLIB_H
-gl_FUNC_STRERROR
-if test $REPLACE_STRERROR = 1; then
- AC_LIBOBJ([strerror])
-fi
-gl_MODULE_INDICATOR([strerror])
-gl_STRING_MODULE_INDICATOR([strerror])
-AC_REQUIRE([gl_HEADER_ERRNO_H])
-AC_REQUIRE([gl_FUNC_STRERROR_0])
-if test -n "$ERRNO_H" || test $REPLACE_STRERROR_0 = 1; then
- AC_LIBOBJ([strerror-override])
- gl_PREREQ_SYS_H_WINSOCK2
-fi
-gl_HEADER_STRING_H
-gl_UNISTD_H
-gl_WCHAR_H
-gl_WCTYPE_H
-gl_XALLOC
- # End of code from modules
- m4_ifval(gl_LIBSOURCES_LIST, [
- m4_syscmd([test ! -d ]m4_defn([gl_LIBSOURCES_DIR])[ ||
- for gl_file in ]gl_LIBSOURCES_LIST[ ; do
- if test ! -r ]m4_defn([gl_LIBSOURCES_DIR])[/$gl_file ; then
- echo "missing file ]m4_defn([gl_LIBSOURCES_DIR])[/$gl_file" >&2
- exit 1
- fi
- done])dnl
- m4_if(m4_sysval, [0], [],
- [AC_FATAL([expected source file, required through AC_LIBSOURCES, not found])])
- ])
- m4_popdef([gl_LIBSOURCES_DIR])
- m4_popdef([gl_LIBSOURCES_LIST])
- m4_popdef([AC_LIBSOURCES])
- m4_popdef([AC_REPLACE_FUNCS])
- m4_popdef([AC_LIBOBJ])
- AC_CONFIG_COMMANDS_PRE([
- gl_libobjs=
- gl_ltlibobjs=
- if test -n "$gl_LIBOBJS"; then
- # Remove the extension.
- sed_drop_objext='s/\.o$//;s/\.obj$//'
- for i in `for i in $gl_LIBOBJS; do echo "$i"; done | sed -e "$sed_drop_objext" | sort | uniq`; do
- gl_libobjs="$gl_libobjs $i.$ac_objext"
- gl_ltlibobjs="$gl_ltlibobjs $i.lo"
- done
- fi
- AC_SUBST([gl_LIBOBJS], [$gl_libobjs])
- AC_SUBST([gl_LTLIBOBJS], [$gl_ltlibobjs])
- ])
- gltests_libdeps=
- gltests_ltlibdeps=
- m4_pushdef([AC_LIBOBJ], m4_defn([gltests_LIBOBJ]))
- m4_pushdef([AC_REPLACE_FUNCS], m4_defn([gltests_REPLACE_FUNCS]))
- m4_pushdef([AC_LIBSOURCES], m4_defn([gltests_LIBSOURCES]))
- m4_pushdef([gltests_LIBSOURCES_LIST], [])
- m4_pushdef([gltests_LIBSOURCES_DIR], [])
- gl_COMMON
- gl_source_base='tests'
-changequote(,)dnl
- gltests_WITNESS=IN_`echo "${PACKAGE-$PACKAGE_TARNAME}" | LC_ALL=C tr abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ | LC_ALL=C sed -e 's/[^A-Z0-9_]/_/g'`_GNULIB_TESTS
-changequote([, ])dnl
- AC_SUBST([gltests_WITNESS])
- gl_module_indicator_condition=$gltests_WITNESS
- m4_pushdef([gl_MODULE_INDICATOR_CONDITION], [$gl_module_indicator_condition])
- m4_popdef([gl_MODULE_INDICATOR_CONDITION])
- m4_ifval(gltests_LIBSOURCES_LIST, [
- m4_syscmd([test ! -d ]m4_defn([gltests_LIBSOURCES_DIR])[ ||
- for gl_file in ]gltests_LIBSOURCES_LIST[ ; do
- if test ! -r ]m4_defn([gltests_LIBSOURCES_DIR])[/$gl_file ; then
- echo "missing file ]m4_defn([gltests_LIBSOURCES_DIR])[/$gl_file" >&2
- exit 1
- fi
- done])dnl
- m4_if(m4_sysval, [0], [],
- [AC_FATAL([expected source file, required through AC_LIBSOURCES, not found])])
- ])
- m4_popdef([gltests_LIBSOURCES_DIR])
- m4_popdef([gltests_LIBSOURCES_LIST])
- m4_popdef([AC_LIBSOURCES])
- m4_popdef([AC_REPLACE_FUNCS])
- m4_popdef([AC_LIBOBJ])
- AC_CONFIG_COMMANDS_PRE([
- gltests_libobjs=
- gltests_ltlibobjs=
- if test -n "$gltests_LIBOBJS"; then
- # Remove the extension.
- sed_drop_objext='s/\.o$//;s/\.obj$//'
- for i in `for i in $gltests_LIBOBJS; do echo "$i"; done | sed -e "$sed_drop_objext" | sort | uniq`; do
- gltests_libobjs="$gltests_libobjs $i.$ac_objext"
- gltests_ltlibobjs="$gltests_ltlibobjs $i.lo"
- done
- fi
- AC_SUBST([gltests_LIBOBJS], [$gltests_libobjs])
- AC_SUBST([gltests_LTLIBOBJS], [$gltests_ltlibobjs])
- ])
- LIBHELLO_LIBDEPS="$gl_libdeps"
- AC_SUBST([LIBHELLO_LIBDEPS])
- LIBHELLO_LTLIBDEPS="$gl_ltlibdeps"
- AC_SUBST([LIBHELLO_LTLIBDEPS])
-])
-
-# Like AC_LIBOBJ, except that the module name goes
-# into gl_LIBOBJS instead of into LIBOBJS.
-AC_DEFUN([gl_LIBOBJ], [
- AS_LITERAL_IF([$1], [gl_LIBSOURCES([$1.c])])dnl
- gl_LIBOBJS="$gl_LIBOBJS $1.$ac_objext"
-])
-
-# Like AC_REPLACE_FUNCS, except that the module name goes
-# into gl_LIBOBJS instead of into LIBOBJS.
-AC_DEFUN([gl_REPLACE_FUNCS], [
- m4_foreach_w([gl_NAME], [$1], [AC_LIBSOURCES(gl_NAME[.c])])dnl
- AC_CHECK_FUNCS([$1], , [gl_LIBOBJ($ac_func)])
-])
-
-# Like AC_LIBSOURCES, except the directory where the source file is
-# expected is derived from the gnulib-tool parameterization,
-# and alloca is special cased (for the alloca-opt module).
-# We could also entirely rely on EXTRA_lib..._SOURCES.
-AC_DEFUN([gl_LIBSOURCES], [
- m4_foreach([_gl_NAME], [$1], [
- m4_if(_gl_NAME, [alloca.c], [], [
- m4_define([gl_LIBSOURCES_DIR], [lib])
- m4_append([gl_LIBSOURCES_LIST], _gl_NAME, [ ])
- ])
- ])
-])
-
-# Like AC_LIBOBJ, except that the module name goes
-# into gltests_LIBOBJS instead of into LIBOBJS.
-AC_DEFUN([gltests_LIBOBJ], [
- AS_LITERAL_IF([$1], [gltests_LIBSOURCES([$1.c])])dnl
- gltests_LIBOBJS="$gltests_LIBOBJS $1.$ac_objext"
-])
-
-# Like AC_REPLACE_FUNCS, except that the module name goes
-# into gltests_LIBOBJS instead of into LIBOBJS.
-AC_DEFUN([gltests_REPLACE_FUNCS], [
- m4_foreach_w([gl_NAME], [$1], [AC_LIBSOURCES(gl_NAME[.c])])dnl
- AC_CHECK_FUNCS([$1], , [gltests_LIBOBJ($ac_func)])
-])
-
-# Like AC_LIBSOURCES, except the directory where the source file is
-# expected is derived from the gnulib-tool parameterization,
-# and alloca is special cased (for the alloca-opt module).
-# We could also entirely rely on EXTRA_lib..._SOURCES.
-AC_DEFUN([gltests_LIBSOURCES], [
- m4_foreach([_gl_NAME], [$1], [
- m4_if(_gl_NAME, [alloca.c], [], [
- m4_define([gltests_LIBSOURCES_DIR], [tests])
- m4_append([gltests_LIBSOURCES_LIST], _gl_NAME, [ ])
- ])
- ])
-])
-
-# This macro records the list of files which have been installed by
-# gnulib-tool and may be removed by future gnulib-tool invocations.
-AC_DEFUN([gl_FILE_LIST], [
- build-aux/announce-gen
- build-aux/config.rpath
- build-aux/do-release-commit-and-tag
- build-aux/gendocs.sh
- build-aux/gnupload
- build-aux/snippet/_Noreturn.h
- build-aux/snippet/arg-nonnull.h
- build-aux/snippet/c++defs.h
- build-aux/snippet/warn-on-use.h
- build-aux/useless-if-before-free
- build-aux/vc-list-files
- doc/fdl.texi
- doc/gendocs_template
- lib/c-ctype.c
- lib/c-ctype.h
- lib/c-strcase.h
- lib/c-strcasecmp.c
- lib/c-strcaseeq.h
- lib/c-strncasecmp.c
- lib/close-stream.c
- lib/close-stream.h
- lib/closeout.c
- lib/closeout.h
- lib/config.charset
- lib/errno.in.h
- lib/error.c
- lib/error.h
- lib/exitfail.c
- lib/exitfail.h
- lib/fpending.c
- lib/fpending.h
- lib/getopt.c
- lib/getopt.in.h
- lib/getopt1.c
- lib/getopt_int.h
- lib/gettext.h
- lib/intprops.h
- lib/localcharset.c
- lib/localcharset.h
- lib/mbrtowc.c
- lib/mbsinit.c
- lib/msvc-inval.c
- lib/msvc-inval.h
- lib/msvc-nothrow.c
- lib/msvc-nothrow.h
- lib/progname.c
- lib/progname.h
- lib/quote.h
- lib/quotearg.c
- lib/quotearg.h
- lib/ref-add.sin
- lib/ref-del.sin
- lib/stdbool.in.h
- lib/stddef.in.h
- lib/stdlib.in.h
- lib/streq.h
- lib/strerror-override.c
- lib/strerror-override.h
- lib/strerror.c
- lib/string.in.h
- lib/unistd.in.h
- lib/verify.h
- lib/wchar.in.h
- lib/wctype.in.h
- lib/xalloc-die.c
- lib/xalloc-oversized.h
- lib/xalloc.h
- lib/xmalloc.c
- m4/00gnulib.m4
- m4/close-stream.m4
- m4/closeout.m4
- m4/codeset.m4
- m4/configmake.m4
- m4/errno_h.m4
- m4/error.m4
- m4/extensions.m4
- m4/fcntl-o.m4
- m4/fpending.m4
- m4/getopt.m4
- m4/gettext.m4
- m4/glibc2.m4
- m4/glibc21.m4
- m4/gnulib-common.m4
- m4/iconv.m4
- m4/include_next.m4
- m4/inline.m4
- m4/intdiv0.m4
- m4/intl.m4
- m4/intldir.m4
- m4/intlmacosx.m4
- m4/intmax.m4
- m4/inttypes-pri.m4
- m4/inttypes_h.m4
- m4/lcmessage.m4
- m4/lib-ld.m4
- m4/lib-link.m4
- m4/lib-prefix.m4
- m4/localcharset.m4
- m4/locale-fr.m4
- m4/locale-ja.m4
- m4/locale-zh.m4
- m4/lock.m4
- m4/longlong.m4
- m4/mbrtowc.m4
- m4/mbsinit.m4
- m4/mbstate_t.m4
- m4/msvc-inval.m4
- m4/msvc-nothrow.m4
- m4/nls.m4
- m4/nocrash.m4
- m4/po.m4
- m4/printf-posix.m4
- m4/progtest.m4
- m4/quotearg.m4
- m4/size_max.m4
- m4/ssize_t.m4
- m4/stdbool.m4
- m4/stddef_h.m4
- m4/stdint_h.m4
- m4/stdlib_h.m4
- m4/strerror.m4
- m4/string_h.m4
- m4/sys_socket_h.m4
- m4/threadlib.m4
- m4/uintmax_t.m4
- m4/unistd_h.m4
- m4/visibility.m4
- m4/warn-on-use.m4
- m4/wchar_h.m4
- m4/wchar_t.m4
- m4/wctype_h.m4
- m4/wint_t.m4
- m4/xalloc.m4
- m4/xsize.m4
- top/GNUmakefile
- top/README-release
- top/maint.mk
-])
+++ /dev/null
-# iconv.m4 serial 18 (gettext-0.18.2)
-dnl Copyright (C) 2000-2002, 2007-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
-[
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([iconv])
-])
-
-AC_DEFUN([AM_ICONV_LINK],
-[
- dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
- dnl those with the standalone portable GNU libiconv installed).
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
-
- dnl Add $INCICONV to CPPFLAGS before performing the following checks,
- dnl because if the user has installed libiconv and not disabled its use
- dnl via --without-libiconv-prefix, he wants to use it. The first
- dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed.
- am_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-
- AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <stdlib.h>
-#include <iconv.h>
- ]],
- [[iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);]])],
- [am_cv_func_iconv=yes])
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <stdlib.h>
-#include <iconv.h>
- ]],
- [[iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);]])],
- [am_cv_lib_iconv=yes]
- [am_cv_func_iconv=yes])
- LIBS="$am_save_LIBS"
- fi
- ])
- if test "$am_cv_func_iconv" = yes; then
- AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
- dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11,
- dnl Solaris 10.
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- AC_RUN_IFELSE(
- [AC_LANG_SOURCE([[
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- int result = 0;
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- result |= 1;
- iconv_close (cd_utf8_to_88591);
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- result |= 2;
- iconv_close (cd_ascii_to_88591);
- }
- }
- /* Test against AIX 6.1..7.1 bug: Buffer overrun. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304";
- static char buf[2] = { (char)0xDE, (char)0xAD };
- const char *inptr = input;
- size_t inbytesleft = 1;
- char *outptr = buf;
- size_t outbytesleft = 1;
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
- result |= 4;
- iconv_close (cd_88591_to_utf8);
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- result |= 8;
- iconv_close (cd_88591_to_utf8);
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- result |= 16;
- return result;
-}]])],
- [am_cv_func_iconv_works=yes],
- [am_cv_func_iconv_works=no],
- [
-changequote(,)dnl
- case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac
-changequote([,])dnl
- ])
- LIBS="$am_save_LIBS"
- ])
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
- AC_DEFINE([HAVE_ICONV], [1],
- [Define if you have the iconv() function and it works.])
- fi
- if test "$am_cv_lib_iconv" = yes; then
- AC_MSG_CHECKING([how to link with libiconv])
- AC_MSG_RESULT([$LIBICONV])
- else
- dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
- dnl either.
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
- AC_SUBST([LIBICONV])
- AC_SUBST([LTLIBICONV])
-])
-
-dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
-dnl avoid warnings like
-dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
-dnl This is tricky because of the way 'aclocal' is implemented:
-dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
-dnl Otherwise aclocal's initial scan pass would miss the macro definition.
-dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
-dnl Otherwise aclocal would emit many "Use of uninitialized value $1"
-dnl warnings.
-m4_define([gl_iconv_AC_DEFUN],
- m4_version_prereq([2.64],
- [[AC_DEFUN_ONCE(
- [$1], [$2])]],
- [m4_ifdef([gl_00GNULIB],
- [[AC_DEFUN_ONCE(
- [$1], [$2])]],
- [[AC_DEFUN(
- [$1], [$2])]])]))
-gl_iconv_AC_DEFUN([AM_ICONV],
-[
- AM_ICONV_LINK
- if test "$am_cv_func_iconv" = yes; then
- AC_MSG_CHECKING([for iconv declaration])
- AC_CACHE_VAL([am_cv_proto_iconv], [
- AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
- ]],
- [[]])],
- [am_cv_proto_iconv_arg1=""],
- [am_cv_proto_iconv_arg1="const"])
- am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
- am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
- AC_MSG_RESULT([
- $am_cv_proto_iconv])
- AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
- [Define as const if the declaration of iconv() needs const.])
- dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>.
- m4_ifdef([gl_ICONV_H_DEFAULTS],
- [AC_REQUIRE([gl_ICONV_H_DEFAULTS])
- if test -n "$am_cv_proto_iconv_arg1"; then
- ICONV_CONST="const"
- fi
- ])
- fi
-])
+++ /dev/null
-# include_next.m4 serial 23
-dnl Copyright (C) 2006-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Paul Eggert and Derek Price.
-
-dnl Sets INCLUDE_NEXT and PRAGMA_SYSTEM_HEADER.
-dnl
-dnl INCLUDE_NEXT expands to 'include_next' if the compiler supports it, or to
-dnl 'include' otherwise.
-dnl
-dnl INCLUDE_NEXT_AS_FIRST_DIRECTIVE expands to 'include_next' if the compiler
-dnl supports it in the special case that it is the first include directive in
-dnl the given file, or to 'include' otherwise.
-dnl
-dnl PRAGMA_SYSTEM_HEADER can be used in files that contain #include_next,
-dnl so as to avoid GCC warnings when the gcc option -pedantic is used.
-dnl '#pragma GCC system_header' has the same effect as if the file was found
-dnl through the include search path specified with '-isystem' options (as
-dnl opposed to the search path specified with '-I' options). Namely, gcc
-dnl does not warn about some things, and on some systems (Solaris and Interix)
-dnl __STDC__ evaluates to 0 instead of to 1. The latter is an undesired side
-dnl effect; we are therefore careful to use 'defined __STDC__' or '1' instead
-dnl of plain '__STDC__'.
-dnl
-dnl PRAGMA_COLUMNS can be used in files that override system header files, so
-dnl as to avoid compilation errors on HP NonStop systems when the gnulib file
-dnl is included by a system header file that does a "#pragma COLUMNS 80" (which
-dnl has the effect of truncating the lines of that file and all files that it
-dnl includes to 80 columns) and the gnulib file has lines longer than 80
-dnl columns.
-
-AC_DEFUN([gl_INCLUDE_NEXT],
-[
- AC_LANG_PREPROC_REQUIRE()
- AC_CACHE_CHECK([whether the preprocessor supports include_next],
- [gl_cv_have_include_next],
- [rm -rf conftestd1a conftestd1b conftestd2
- mkdir conftestd1a conftestd1b conftestd2
- dnl IBM C 9.0, 10.1 (original versions, prior to the 2009-01 updates) on
- dnl AIX 6.1 support include_next when used as first preprocessor directive
- dnl in a file, but not when preceded by another include directive. Check
- dnl for this bug by including <stdio.h>.
- dnl Additionally, with this same compiler, include_next is a no-op when
- dnl used in a header file that was included by specifying its absolute
- dnl file name. Despite these two bugs, include_next is used in the
- dnl compiler's <math.h>. By virtue of the second bug, we need to use
- dnl include_next as well in this case.
- cat <<EOF > conftestd1a/conftest.h
-#define DEFINED_IN_CONFTESTD1
-#include_next <conftest.h>
-#ifdef DEFINED_IN_CONFTESTD2
-int foo;
-#else
-#error "include_next doesn't work"
-#endif
-EOF
- cat <<EOF > conftestd1b/conftest.h
-#define DEFINED_IN_CONFTESTD1
-#include <stdio.h>
-#include_next <conftest.h>
-#ifdef DEFINED_IN_CONFTESTD2
-int foo;
-#else
-#error "include_next doesn't work"
-#endif
-EOF
- cat <<EOF > conftestd2/conftest.h
-#ifndef DEFINED_IN_CONFTESTD1
-#error "include_next test doesn't work"
-#endif
-#define DEFINED_IN_CONFTESTD2
-EOF
- gl_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$gl_save_CPPFLAGS -Iconftestd1b -Iconftestd2"
-dnl We intentionally avoid using AC_LANG_SOURCE here.
- AC_COMPILE_IFELSE([AC_LANG_DEFINES_PROVIDED[#include <conftest.h>]],
- [gl_cv_have_include_next=yes],
- [CPPFLAGS="$gl_save_CPPFLAGS -Iconftestd1a -Iconftestd2"
- AC_COMPILE_IFELSE([AC_LANG_DEFINES_PROVIDED[#include <conftest.h>]],
- [gl_cv_have_include_next=buggy],
- [gl_cv_have_include_next=no])
- ])
- CPPFLAGS="$gl_save_CPPFLAGS"
- rm -rf conftestd1a conftestd1b conftestd2
- ])
- PRAGMA_SYSTEM_HEADER=
- if test $gl_cv_have_include_next = yes; then
- INCLUDE_NEXT=include_next
- INCLUDE_NEXT_AS_FIRST_DIRECTIVE=include_next
- if test -n "$GCC"; then
- PRAGMA_SYSTEM_HEADER='#pragma GCC system_header'
- fi
- else
- if test $gl_cv_have_include_next = buggy; then
- INCLUDE_NEXT=include
- INCLUDE_NEXT_AS_FIRST_DIRECTIVE=include_next
- else
- INCLUDE_NEXT=include
- INCLUDE_NEXT_AS_FIRST_DIRECTIVE=include
- fi
- fi
- AC_SUBST([INCLUDE_NEXT])
- AC_SUBST([INCLUDE_NEXT_AS_FIRST_DIRECTIVE])
- AC_SUBST([PRAGMA_SYSTEM_HEADER])
- AC_CACHE_CHECK([whether system header files limit the line length],
- [gl_cv_pragma_columns],
- [dnl HP NonStop systems, which define __TANDEM, have this misfeature.
- AC_EGREP_CPP([choke me],
- [
-#ifdef __TANDEM
-choke me
-#endif
- ],
- [gl_cv_pragma_columns=yes],
- [gl_cv_pragma_columns=no])
- ])
- if test $gl_cv_pragma_columns = yes; then
- PRAGMA_COLUMNS="#pragma COLUMNS 10000"
- else
- PRAGMA_COLUMNS=
- fi
- AC_SUBST([PRAGMA_COLUMNS])
-])
-
-# gl_CHECK_NEXT_HEADERS(HEADER1 HEADER2 ...)
-# ------------------------------------------
-# For each arg foo.h, if #include_next works, define NEXT_FOO_H to be
-# '<foo.h>'; otherwise define it to be
-# '"///usr/include/foo.h"', or whatever other absolute file name is suitable.
-# Also, if #include_next works as first preprocessing directive in a file,
-# define NEXT_AS_FIRST_DIRECTIVE_FOO_H to be '<foo.h>'; otherwise define it to
-# be
-# '"///usr/include/foo.h"', or whatever other absolute file name is suitable.
-# That way, a header file with the following line:
-# #@INCLUDE_NEXT@ @NEXT_FOO_H@
-# or
-# #@INCLUDE_NEXT_AS_FIRST_DIRECTIVE@ @NEXT_AS_FIRST_DIRECTIVE_FOO_H@
-# behaves (after sed substitution) as if it contained
-# #include_next <foo.h>
-# even if the compiler does not support include_next.
-# The three "///" are to pacify Sun C 5.8, which otherwise would say
-# "warning: #include of /usr/include/... may be non-portable".
-# Use '""', not '<>', so that the /// cannot be confused with a C99 comment.
-# Note: This macro assumes that the header file is not empty after
-# preprocessing, i.e. it does not only define preprocessor macros but also
-# provides some type/enum definitions or function/variable declarations.
-#
-# This macro also checks whether each header exists, by invoking
-# AC_CHECK_HEADERS_ONCE or AC_CHECK_HEADERS on each argument.
-AC_DEFUN([gl_CHECK_NEXT_HEADERS],
-[
- gl_NEXT_HEADERS_INTERNAL([$1], [check])
-])
-
-# gl_NEXT_HEADERS(HEADER1 HEADER2 ...)
-# ------------------------------------
-# Like gl_CHECK_NEXT_HEADERS, except do not check whether the headers exist.
-# This is suitable for headers like <stddef.h> that are standardized by C89
-# and therefore can be assumed to exist.
-AC_DEFUN([gl_NEXT_HEADERS],
-[
- gl_NEXT_HEADERS_INTERNAL([$1], [assume])
-])
-
-# The guts of gl_CHECK_NEXT_HEADERS and gl_NEXT_HEADERS.
-AC_DEFUN([gl_NEXT_HEADERS_INTERNAL],
-[
- AC_REQUIRE([gl_INCLUDE_NEXT])
- AC_REQUIRE([AC_CANONICAL_HOST])
-
- m4_if([$2], [check],
- [AC_CHECK_HEADERS_ONCE([$1])
- ])
-
-dnl FIXME: gl_next_header and gl_header_exists must be used unquoted
-dnl until we can assume autoconf 2.64 or newer.
- m4_foreach_w([gl_HEADER_NAME], [$1],
- [AS_VAR_PUSHDEF([gl_next_header],
- [gl_cv_next_]m4_defn([gl_HEADER_NAME]))
- if test $gl_cv_have_include_next = yes; then
- AS_VAR_SET(gl_next_header, ['<'gl_HEADER_NAME'>'])
- else
- AC_CACHE_CHECK(
- [absolute name of <]m4_defn([gl_HEADER_NAME])[>],
- m4_defn([gl_next_header]),
- [m4_if([$2], [check],
- [AS_VAR_PUSHDEF([gl_header_exists],
- [ac_cv_header_]m4_defn([gl_HEADER_NAME]))
- if test AS_VAR_GET(gl_header_exists) = yes; then
- AS_VAR_POPDEF([gl_header_exists])
- ])
- AC_LANG_CONFTEST(
- [AC_LANG_SOURCE(
- [[#include <]]m4_dquote(m4_defn([gl_HEADER_NAME]))[[>]]
- )])
- dnl AIX "xlc -E" and "cc -E" omit #line directives for header
- dnl files that contain only a #include of other header files and
- dnl no non-comment tokens of their own. This leads to a failure
- dnl to detect the absolute name of <dirent.h>, <signal.h>,
- dnl <poll.h> and others. The workaround is to force preservation
- dnl of comments through option -C. This ensures all necessary
- dnl #line directives are present. GCC supports option -C as well.
- case "$host_os" in
- aix*) gl_absname_cpp="$ac_cpp -C" ;;
- *) gl_absname_cpp="$ac_cpp" ;;
- esac
-changequote(,)
- case "$host_os" in
- mingw*)
- dnl For the sake of native Windows compilers (excluding gcc),
- dnl treat backslash as a directory separator, like /.
- dnl Actually, these compilers use a double-backslash as
- dnl directory separator, inside the
- dnl # line "filename"
- dnl directives.
- gl_dirsep_regex='[/\\]'
- ;;
- *)
- gl_dirsep_regex='\/'
- ;;
- esac
- dnl A sed expression that turns a string into a basic regular
- dnl expression, for use within "/.../".
- gl_make_literal_regex_sed='s,[]$^\\.*/[],\\&,g'
-changequote([,])
- gl_header_literal_regex=`echo ']m4_defn([gl_HEADER_NAME])[' \
- | sed -e "$gl_make_literal_regex_sed"`
- gl_absolute_header_sed="/${gl_dirsep_regex}${gl_header_literal_regex}/"'{
- s/.*"\(.*'"${gl_dirsep_regex}${gl_header_literal_regex}"'\)".*/\1/
-changequote(,)dnl
- s|^/[^/]|//&|
-changequote([,])dnl
- p
- q
- }'
- dnl eval is necessary to expand gl_absname_cpp.
- dnl Ultrix and Pyramid sh refuse to redirect output of eval,
- dnl so use subshell.
- AS_VAR_SET(gl_next_header,
- ['"'`(eval "$gl_absname_cpp conftest.$ac_ext") 2>&AS_MESSAGE_LOG_FD |
- sed -n "$gl_absolute_header_sed"`'"'])
- m4_if([$2], [check],
- [else
- AS_VAR_SET(gl_next_header, ['<'gl_HEADER_NAME'>'])
- fi
- ])
- ])
- fi
- AC_SUBST(
- AS_TR_CPP([NEXT_]m4_defn([gl_HEADER_NAME])),
- [AS_VAR_GET(gl_next_header)])
- if test $gl_cv_have_include_next = yes || test $gl_cv_have_include_next = buggy; then
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next'
- gl_next_as_first_directive='<'gl_HEADER_NAME'>'
- else
- # INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include'
- gl_next_as_first_directive=AS_VAR_GET(gl_next_header)
- fi
- AC_SUBST(
- AS_TR_CPP([NEXT_AS_FIRST_DIRECTIVE_]m4_defn([gl_HEADER_NAME])),
- [$gl_next_as_first_directive])
- AS_VAR_POPDEF([gl_next_header])])
-])
-
-# Autoconf 2.68 added warnings for our use of AC_COMPILE_IFELSE;
-# this fallback is safe for all earlier autoconf versions.
-m4_define_default([AC_LANG_DEFINES_PROVIDED])
+++ /dev/null
-# inline.m4 serial 4
-dnl Copyright (C) 2006, 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Test for the 'inline' keyword or equivalent.
-dnl Define 'inline' to a supported equivalent, or to nothing if not supported,
-dnl like AC_C_INLINE does. Also, define HAVE_INLINE if 'inline' or an
-dnl equivalent is effectively supported, i.e. if the compiler is likely to
-dnl drop unused 'static inline' functions.
-AC_DEFUN([gl_INLINE],
-[
- AC_REQUIRE([AC_C_INLINE])
- AC_CACHE_CHECK([whether the compiler generally respects inline],
- [gl_cv_c_inline_effective],
- [if test $ac_cv_c_inline = no; then
- gl_cv_c_inline_effective=no
- else
- dnl GCC defines __NO_INLINE__ if not optimizing or if -fno-inline is
- dnl specified.
- dnl Use AC_COMPILE_IFELSE here, not AC_EGREP_CPP, because the result
- dnl depends on optimization flags, which can be in CFLAGS.
- dnl (AC_EGREP_CPP looks only at the CPPFLAGS.)
- AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM([[]],
- [[#ifdef __NO_INLINE__
- #error "inline is not effective"
- #endif]])],
- [gl_cv_c_inline_effective=yes],
- [gl_cv_c_inline_effective=no])
- fi
- ])
- if test $gl_cv_c_inline_effective = yes; then
- AC_DEFINE([HAVE_INLINE], [1],
- [Define to 1 if the compiler supports one of the keywords
- 'inline', '__inline__', '__inline' and effectively inlines
- functions marked as such.])
- fi
-])
+++ /dev/null
-# intlmacosx.m4 serial 4 (gettext-0.18.2)
-dnl Copyright (C) 2004-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Checks for special options needed on MacOS X.
-dnl Defines INTL_MACOSX_LIBS.
-AC_DEFUN([gt_INTL_MACOSX],
-[
- dnl Check for API introduced in MacOS X 10.2.
- AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
- [gt_cv_func_CFPreferencesCopyAppValue],
- [gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <CoreFoundation/CFPreferences.h>]],
- [[CFPreferencesCopyAppValue(NULL, NULL)]])],
- [gt_cv_func_CFPreferencesCopyAppValue=yes],
- [gt_cv_func_CFPreferencesCopyAppValue=no])
- LIBS="$gt_save_LIBS"])
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
- AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
- [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
- fi
- dnl Check for API introduced in MacOS X 10.3.
- AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
- [gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <CoreFoundation/CFLocale.h>]],
- [[CFLocaleCopyCurrent();]])],
- [gt_cv_func_CFLocaleCopyCurrent=yes],
- [gt_cv_func_CFLocaleCopyCurrent=no])
- LIBS="$gt_save_LIBS"])
- if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
- [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
- fi
- INTL_MACOSX_LIBS=
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
- fi
- AC_SUBST([INTL_MACOSX_LIBS])
-])
+++ /dev/null
-# lib-ld.m4 serial 5 (gettext-0.18.2)
-dnl Copyright (C) 1996-2003, 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-dnl with libtool.m4.
-
-dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-1.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
- # contains only /bin. Note that ksh looks also at the FPATH variable,
- # so we have to set that as well for the test.
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- || PATH_SEPARATOR=';'
- }
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- [re_direlt='/[^/][^/]*/\.\./']
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL([acl_cv_path_LD],
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT([$LD])
-else
- AC_MSG_RESULT([no])
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_LIB_PROG_LD_GNU
-])
+++ /dev/null
-# lib-link.m4 serial 26 (gettext-0.18.2)
-dnl Copyright (C) 2001-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ([2.54])
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[m4_translit([$1],[./+-], [____])])
- pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
- ac_cv_lib[]Name[]_libs="$LIB[]NAME"
- ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
- ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
- ])
- LIB[]NAME="$ac_cv_lib[]Name[]_libs"
- LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
- INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
- dnl results of this search when this library appears as a dependency.
- HAVE_LIB[]NAME=yes
- popdef([NAME])
- popdef([Name])
-])
-
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. The missing-message
-dnl defaults to 'no' and may contain additional hints for the user.
-dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
-dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[m4_translit([$1],[./+-], [____])])
- pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
-
- dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
- dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
- dnl because if the user has installed lib[]Name and not disabled its use
- dnl via --without-lib[]Name-prefix, he wants to use it.
- ac_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
- AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
- ac_save_LIBS="$LIBS"
- dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
- dnl because these -l options might require -L options that are present in
- dnl LIBS. -l options benefit only from the -L options listed before it.
- dnl Otherwise, add it to the front of LIBS, because it may be a static
- dnl library that depends on another static library that is present in LIBS.
- dnl Static libraries benefit only from the static libraries listed after
- dnl it.
- case " $LIB[]NAME" in
- *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
- *) LIBS="$LIB[]NAME $LIBS" ;;
- esac
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM([[$3]], [[$4]])],
- [ac_cv_lib[]Name=yes],
- [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
- LIBS="$ac_save_LIBS"
- ])
- if test "$ac_cv_lib[]Name" = yes; then
- HAVE_LIB[]NAME=yes
- AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
- AC_MSG_CHECKING([how to link with lib[]$1])
- AC_MSG_RESULT([$LIB[]NAME])
- else
- HAVE_LIB[]NAME=no
- dnl If $LIB[]NAME didn't lead to a usable library, we don't need
- dnl $INC[]NAME either.
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIB[]NAME=
- LTLIB[]NAME=
- LIB[]NAME[]_PREFIX=
- fi
- AC_SUBST([HAVE_LIB]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- popdef([NAME])
- popdef([Name])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl acl_libext,
-dnl acl_shlibext,
-dnl acl_libname_spec,
-dnl acl_library_names_spec,
-dnl acl_hardcode_libdir_flag_spec,
-dnl acl_hardcode_libdir_separator,
-dnl acl_hardcode_direct,
-dnl acl_hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
- dnl Tell automake >= 1.10 to complain if config.rpath is missing.
- m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
- AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
- AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
- AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
- AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
- ])
- wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
- dnl Determine whether the user wants rpath handling at all.
- AC_ARG_ENABLE([rpath],
- [ --disable-rpath do not hardcode runtime library paths],
- :, enable_rpath=yes)
-])
-
-dnl AC_LIB_FROMPACKAGE(name, package)
-dnl declares that libname comes from the given package. The configure file
-dnl will then not have a --with-libname-prefix option but a
-dnl --with-package-prefix option. Several libraries can come from the same
-dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
-dnl macro call that searches for libname.
-AC_DEFUN([AC_LIB_FROMPACKAGE],
-[
- pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- define([acl_frompackage_]NAME, [$2])
- popdef([NAME])
- pushdef([PACK],[$2])
- pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- define([acl_libsinpackage_]PACKUP,
- m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1])
- popdef([PACKUP])
- popdef([PACK])
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
-dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
- pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
- pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
- dnl Autoconf >= 2.61 supports dots in --with options.
- pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[m4_translit(PACK,[.],[_])],PACK)])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_ARG_WITH(P_A_C_K[-prefix],
-[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib
- --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-])
- dnl Search the library and its dependencies in $additional_libdir and
- dnl $LDFLAGS. Using breadth-first-seach.
- LIB[]NAME=
- LTLIB[]NAME=
- INC[]NAME=
- LIB[]NAME[]_PREFIX=
- dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
- dnl computed. So it has to be reset here.
- HAVE_LIB[]NAME=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='$1 $2'
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
- dnl or AC_LIB_HAVE_LINKFLAGS call.
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
- else
- dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
- dnl that this library doesn't exist. So just drop it.
- :
- fi
- else
- dnl Search the library lib$name in $additional_libdir and $LDFLAGS
- dnl and the already constructed $LIBNAME/$LTLIBNAME.
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- dnl The same code as in the loop below:
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- dnl Found the library.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- dnl Linking with a shared library. We attempt to hardcode its
- dnl directory into the executable's runpath, unless it's the
- dnl standard /usr/lib.
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- dnl No hardcoding is needed.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- dnl The hardcoding into $LIBNAME is system dependent.
- if test "$acl_hardcode_direct" = yes; then
- dnl Using DIR/libNAME.so during linking hardcodes DIR into the
- dnl resulting binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- dnl Rely on "-L$found_dir".
- dnl But don't add it if it's already contained in the LDFLAGS
- dnl or the already constructed $LIBNAME
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
- dnl here, because this doesn't fit in flags passed to the
- dnl compiler. So give up. No hardcoding. This affects only
- dnl very old systems.
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- dnl Linking with a static library.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
- else
- dnl We shouldn't come here, but anyway it's good to have a
- dnl fallback.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
- fi
- fi
- dnl Assume the include files are nearby.
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- dnl Potentially add $additional_includedir to $INCNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's /usr/local/include and we are using GCC on Linux,
- dnl 3. if it's already present in $CPPFLAGS or the already
- dnl constructed $INCNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INC[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $INCNAME.
- INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- dnl Look for dependencies.
- if test -n "$found_la"; then
- dnl Read the .la file. It defines the variables
- dnl dlname, library_names, old_library, dependency_libs, current,
- dnl age, revision, installed, dlopen, dlpreopen, libdir.
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- dnl We use only dependency_libs.
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 3. if it's already present in $LDFLAGS or the already
- dnl constructed $LIBNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LIBNAME.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LTLIBNAME.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- dnl Handle this in the next round.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- dnl Handle this in the next round. Throw away the .la's
- dnl directory; it is already contained in a preceding -L
- dnl option.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- dnl Most likely an immediate library name.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
- ;;
- esac
- done
- fi
- else
- dnl Didn't find the library; assume it is in the system directories
- dnl known to the linker and runtime loader. (All the system
- dnl directories known to the linker should also be known to the
- dnl runtime loader, otherwise the system is severely misconfigured.)
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user must
- dnl pass all path elements in one option. We can arrange that for a
- dnl single library, but not when more than one $LIBNAMEs are used.
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- else
- dnl The -rpath options are cumulative.
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- dnl When using libtool, the option that works for both libraries and
- dnl executables is -R. The -R options are cumulative.
- for found_dir in $ltrpathdirs; do
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
- done
- fi
- popdef([P_A_C_K])
- popdef([PACKLIBS])
- popdef([PACKUP])
- popdef([PACK])
- popdef([NAME])
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
- for element in [$2]; do
- haveit=
- for x in $[$1]; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- [$1]="${[$1]}${[$1]:+ }$element"
- fi
- done
-])
-
-dnl For those cases where a variable contains several -L and -l options
-dnl referring to unknown libraries and directories, this macro determines the
-dnl necessary additional linker options for the runtime path.
-dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
-dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
-dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
-dnl otherwise linking without libtool is assumed.
-AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
-[
- AC_REQUIRE([AC_LIB_RPATH])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- $1=
- if test "$enable_rpath" != no; then
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode directories into the resulting
- dnl binary.
- rpathdirs=
- next=
- for opt in $2; do
- if test -n "$next"; then
- dir="$next"
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next=
- else
- case $opt in
- -L) next=yes ;;
- -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next= ;;
- *) next= ;;
- esac
- fi
- done
- if test "X$rpathdirs" != "X"; then
- if test -n ""$3""; then
- dnl libtool is used for linking. Use -R options.
- for dir in $rpathdirs; do
- $1="${$1}${$1:+ }-R$dir"
- done
- else
- dnl The linker is used for linking directly.
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user
- dnl must pass all path elements in one option.
- alldirs=
- for dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="$flag"
- else
- dnl The -rpath options are cumulative.
- for dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="${$1}${$1:+ }$flag"
- done
- fi
- fi
- fi
- fi
- fi
- AC_SUBST([$1])
-])
+++ /dev/null
-# lib-prefix.m4 serial 7 (gettext-0.18)
-dnl Copyright (C) 2001-2005, 2008-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-dnl require excessive bracketing.
-ifdef([AC_HELP_STRING],
-[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
- AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib-prefix],
-[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
- --without-lib-prefix don't search for libraries in includedir and libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-])
- if test $use_additional = yes; then
- dnl Potentially add $additional_includedir to $CPPFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's already present in $CPPFLAGS,
- dnl 3. if it's /usr/local/include and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- for x in $CPPFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $CPPFLAGS.
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- dnl Potentially add $additional_libdir to $LDFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's already present in $LDFLAGS,
- dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- for x in $LDFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux*) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LDFLAGS.
- LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
- dnl Unfortunately, prefix and exec_prefix get only finally determined
- dnl at the end of configure.
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- $1
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_PREPARE_MULTILIB creates
-dnl - a variable acl_libdirstem, containing the basename of the libdir, either
-dnl "lib" or "lib64" or "lib/64",
-dnl - a variable acl_libdirstem2, as a secondary possible value for
-dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
-dnl "lib/amd64".
-AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
-[
- dnl There is no formal standard regarding lib and lib64.
- dnl On glibc systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
- dnl the compiler's default mode by looking at the compiler's library search
- dnl path. If at least one of its elements ends in /lib64 or points to a
- dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
- dnl Otherwise we use the default, namely "lib".
- dnl On Solaris systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
- dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
- AC_REQUIRE([AC_CANONICAL_HOST])
- acl_libdirstem=lib
- acl_libdirstem2=
- case "$host_os" in
- solaris*)
- dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
- dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>.
- dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
- dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
- dnl symlink is missing, so we set acl_libdirstem2 too.
- AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
- [AC_EGREP_CPP([sixtyfour bits], [
-#ifdef _LP64
-sixtyfour bits
-#endif
- ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no])
- ])
- if test $gl_cv_solaris_64bit = yes; then
- acl_libdirstem=lib/64
- case "$host_cpu" in
- sparc*) acl_libdirstem2=lib/sparcv9 ;;
- i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
- esac
- fi
- ;;
- *)
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- */../ | */.. )
- # Better ignore directories of this form. They are misleading.
- ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
- ;;
- esac
- test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
-])
+++ /dev/null
-# localcharset.m4 serial 7
-dnl Copyright (C) 2002, 2004, 2006, 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_LOCALCHARSET],
-[
- dnl Prerequisites of lib/localcharset.c.
- AC_REQUIRE([AM_LANGINFO_CODESET])
- AC_REQUIRE([gl_FCNTL_O_FLAGS])
- AC_CHECK_DECLS_ONCE([getc_unlocked])
-
- dnl Prerequisites of the lib/Makefile.am snippet.
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([gl_GLIBC21])
-])
+++ /dev/null
-# locale-fr.m4 serial 16
-dnl Copyright (C) 2003, 2005-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl Determine the name of a french locale with traditional encoding.
-AC_DEFUN([gt_LOCALE_FR],
-[
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AM_LANGINFO_CODESET])
- AC_CACHE_CHECK([for a traditional french locale], [gt_cv_locale_fr], [
- AC_LANG_CONFTEST([AC_LANG_SOURCE([
-changequote(,)dnl
-#include <locale.h>
-#include <time.h>
-#if HAVE_LANGINFO_CODESET
-# include <langinfo.h>
-#endif
-#include <stdlib.h>
-#include <string.h>
-struct tm t;
-char buf[16];
-int main () {
- /* Check whether the given locale name is recognized by the system. */
-#if (defined _WIN32 || defined __WIN32__) && !defined __CYGWIN__
- /* On native Windows, setlocale(category, "") looks at the system settings,
- not at the environment variables. Also, when an encoding suffix such
- as ".65001" or ".54936" is specified, it succeeds but sets the LC_CTYPE
- category of the locale to "C". */
- if (setlocale (LC_ALL, getenv ("LC_ALL")) == NULL
- || strcmp (setlocale (LC_CTYPE, NULL), "C") == 0)
- return 1;
-#else
- if (setlocale (LC_ALL, "") == NULL) return 1;
-#endif
- /* Check whether nl_langinfo(CODESET) is nonempty and not "ASCII" or "646".
- On MacOS X 10.3.5 (Darwin 7.5) in the fr_FR locale, nl_langinfo(CODESET)
- is empty, and the behaviour of Tcl 8.4 in this locale is not useful.
- On OpenBSD 4.0, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "646". In this situation,
- some unit tests fail.
- On MirBSD 10, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "UTF-8". */
-#if HAVE_LANGINFO_CODESET
- {
- const char *cs = nl_langinfo (CODESET);
- if (cs[0] == '\0' || strcmp (cs, "ASCII") == 0 || strcmp (cs, "646") == 0
- || strcmp (cs, "UTF-8") == 0)
- return 1;
- }
-#endif
-#ifdef __CYGWIN__
- /* On Cygwin, avoid locale names without encoding suffix, because the
- locale_charset() function relies on the encoding suffix. Note that
- LC_ALL is set on the command line. */
- if (strchr (getenv ("LC_ALL"), '.') == NULL) return 1;
-#endif
- /* Check whether in the abbreviation of the second month, the second
- character (should be U+00E9: LATIN SMALL LETTER E WITH ACUTE) is only
- one byte long. This excludes the UTF-8 encoding. */
- t.tm_year = 1975 - 1900; t.tm_mon = 2 - 1; t.tm_mday = 4;
- if (strftime (buf, sizeof (buf), "%b", &t) < 3 || buf[2] != 'v') return 1;
-#if !defined __BIONIC__ /* Bionic libc's 'struct lconv' is just a dummy. */
- /* Check whether the decimal separator is a comma.
- On NetBSD 3.0 in the fr_FR.ISO8859-1 locale, localeconv()->decimal_point
- are nl_langinfo(RADIXCHAR) are both ".". */
- if (localeconv () ->decimal_point[0] != ',') return 1;
-#endif
- return 0;
-}
-changequote([,])dnl
- ])])
- if AC_TRY_EVAL([ac_link]) && test -s conftest$ac_exeext; then
- case "$host_os" in
- # Handle native Windows specially, because there setlocale() interprets
- # "ar" as "Arabic" or "Arabic_Saudi Arabia.1256",
- # "fr" or "fra" as "French" or "French_France.1252",
- # "ge"(!) or "deu"(!) as "German" or "German_Germany.1252",
- # "ja" as "Japanese" or "Japanese_Japan.932",
- # and similar.
- mingw*)
- # Test for the native Windows locale name.
- if (LC_ALL=French_France.1252 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr=French_France.1252
- else
- # None found.
- gt_cv_locale_fr=none
- fi
- ;;
- *)
- # Setting LC_ALL is not enough. Need to set LC_TIME to empty, because
- # otherwise on MacOS X 10.3.5 the LC_TIME=C from the beginning of the
- # configure script would override the LC_ALL setting. Likewise for
- # LC_CTYPE, which is also set at the beginning of the configure script.
- # Test for the usual locale name.
- if (LC_ALL=fr_FR LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr=fr_FR
- else
- # Test for the locale name with explicit encoding suffix.
- if (LC_ALL=fr_FR.ISO-8859-1 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr=fr_FR.ISO-8859-1
- else
- # Test for the AIX, OSF/1, FreeBSD, NetBSD, OpenBSD locale name.
- if (LC_ALL=fr_FR.ISO8859-1 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr=fr_FR.ISO8859-1
- else
- # Test for the HP-UX locale name.
- if (LC_ALL=fr_FR.iso88591 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr=fr_FR.iso88591
- else
- # Test for the Solaris 7 locale name.
- if (LC_ALL=fr LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr=fr
- else
- # None found.
- gt_cv_locale_fr=none
- fi
- fi
- fi
- fi
- fi
- ;;
- esac
- fi
- rm -fr conftest*
- ])
- LOCALE_FR=$gt_cv_locale_fr
- AC_SUBST([LOCALE_FR])
-])
-
-dnl Determine the name of a french locale with UTF-8 encoding.
-AC_DEFUN([gt_LOCALE_FR_UTF8],
-[
- AC_REQUIRE([AM_LANGINFO_CODESET])
- AC_CACHE_CHECK([for a french Unicode locale], [gt_cv_locale_fr_utf8], [
- AC_LANG_CONFTEST([AC_LANG_SOURCE([
-changequote(,)dnl
-#include <locale.h>
-#include <time.h>
-#if HAVE_LANGINFO_CODESET
-# include <langinfo.h>
-#endif
-#include <stdlib.h>
-#include <string.h>
-struct tm t;
-char buf[16];
-int main () {
- /* On BeOS and Haiku, locales are not implemented in libc. Rather, libintl
- imitates locale dependent behaviour by looking at the environment
- variables, and all locales use the UTF-8 encoding. */
-#if !(defined __BEOS__ || defined __HAIKU__)
- /* Check whether the given locale name is recognized by the system. */
-# if (defined _WIN32 || defined __WIN32__) && !defined __CYGWIN__
- /* On native Windows, setlocale(category, "") looks at the system settings,
- not at the environment variables. Also, when an encoding suffix such
- as ".65001" or ".54936" is specified, it succeeds but sets the LC_CTYPE
- category of the locale to "C". */
- if (setlocale (LC_ALL, getenv ("LC_ALL")) == NULL
- || strcmp (setlocale (LC_CTYPE, NULL), "C") == 0)
- return 1;
-# else
- if (setlocale (LC_ALL, "") == NULL) return 1;
-# endif
- /* Check whether nl_langinfo(CODESET) is nonempty and not "ASCII" or "646".
- On MacOS X 10.3.5 (Darwin 7.5) in the fr_FR locale, nl_langinfo(CODESET)
- is empty, and the behaviour of Tcl 8.4 in this locale is not useful.
- On OpenBSD 4.0, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "646". In this situation,
- some unit tests fail. */
-# if HAVE_LANGINFO_CODESET
- {
- const char *cs = nl_langinfo (CODESET);
- if (cs[0] == '\0' || strcmp (cs, "ASCII") == 0 || strcmp (cs, "646") == 0)
- return 1;
- }
-# endif
-# ifdef __CYGWIN__
- /* On Cygwin, avoid locale names without encoding suffix, because the
- locale_charset() function relies on the encoding suffix. Note that
- LC_ALL is set on the command line. */
- if (strchr (getenv ("LC_ALL"), '.') == NULL) return 1;
-# endif
- /* Check whether in the abbreviation of the second month, the second
- character (should be U+00E9: LATIN SMALL LETTER E WITH ACUTE) is
- two bytes long, with UTF-8 encoding. */
- t.tm_year = 1975 - 1900; t.tm_mon = 2 - 1; t.tm_mday = 4;
- if (strftime (buf, sizeof (buf), "%b", &t) < 4
- || buf[1] != (char) 0xc3 || buf[2] != (char) 0xa9 || buf[3] != 'v')
- return 1;
-#endif
-#if !defined __BIONIC__ /* Bionic libc's 'struct lconv' is just a dummy. */
- /* Check whether the decimal separator is a comma.
- On NetBSD 3.0 in the fr_FR.ISO8859-1 locale, localeconv()->decimal_point
- are nl_langinfo(RADIXCHAR) are both ".". */
- if (localeconv () ->decimal_point[0] != ',') return 1;
-#endif
- return 0;
-}
-changequote([,])dnl
- ])])
- if AC_TRY_EVAL([ac_link]) && test -s conftest$ac_exeext; then
- case "$host_os" in
- # Handle native Windows specially, because there setlocale() interprets
- # "ar" as "Arabic" or "Arabic_Saudi Arabia.1256",
- # "fr" or "fra" as "French" or "French_France.1252",
- # "ge"(!) or "deu"(!) as "German" or "German_Germany.1252",
- # "ja" as "Japanese" or "Japanese_Japan.932",
- # and similar.
- mingw*)
- # Test for the hypothetical native Windows locale name.
- if (LC_ALL=French_France.65001 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr_utf8=French_France.65001
- else
- # None found.
- gt_cv_locale_fr_utf8=none
- fi
- ;;
- *)
- # Setting LC_ALL is not enough. Need to set LC_TIME to empty, because
- # otherwise on MacOS X 10.3.5 the LC_TIME=C from the beginning of the
- # configure script would override the LC_ALL setting. Likewise for
- # LC_CTYPE, which is also set at the beginning of the configure script.
- # Test for the usual locale name.
- if (LC_ALL=fr_FR LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr_utf8=fr_FR
- else
- # Test for the locale name with explicit encoding suffix.
- if (LC_ALL=fr_FR.UTF-8 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr_utf8=fr_FR.UTF-8
- else
- # Test for the Solaris 7 locale name.
- if (LC_ALL=fr.UTF-8 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_fr_utf8=fr.UTF-8
- else
- # None found.
- gt_cv_locale_fr_utf8=none
- fi
- fi
- fi
- ;;
- esac
- fi
- rm -fr conftest*
- ])
- LOCALE_FR_UTF8=$gt_cv_locale_fr_utf8
- AC_SUBST([LOCALE_FR_UTF8])
-])
+++ /dev/null
-# locale-ja.m4 serial 11
-dnl Copyright (C) 2003, 2005-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl Determine the name of a japanese locale with EUC-JP encoding.
-AC_DEFUN([gt_LOCALE_JA],
-[
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AM_LANGINFO_CODESET])
- AC_CACHE_CHECK([for a traditional japanese locale], [gt_cv_locale_ja], [
- AC_LANG_CONFTEST([AC_LANG_SOURCE([
-changequote(,)dnl
-#include <locale.h>
-#include <time.h>
-#if HAVE_LANGINFO_CODESET
-# include <langinfo.h>
-#endif
-#include <stdlib.h>
-#include <string.h>
-struct tm t;
-char buf[16];
-int main ()
-{
- const char *p;
- /* Check whether the given locale name is recognized by the system. */
-#if (defined _WIN32 || defined __WIN32__) && !defined __CYGWIN__
- /* On native Windows, setlocale(category, "") looks at the system settings,
- not at the environment variables. Also, when an encoding suffix such
- as ".65001" or ".54936" is specified, it succeeds but sets the LC_CTYPE
- category of the locale to "C". */
- if (setlocale (LC_ALL, getenv ("LC_ALL")) == NULL
- || strcmp (setlocale (LC_CTYPE, NULL), "C") == 0)
- return 1;
-#else
- if (setlocale (LC_ALL, "") == NULL) return 1;
-#endif
- /* Check whether nl_langinfo(CODESET) is nonempty and not "ASCII" or "646".
- On MacOS X 10.3.5 (Darwin 7.5) in the fr_FR locale, nl_langinfo(CODESET)
- is empty, and the behaviour of Tcl 8.4 in this locale is not useful.
- On OpenBSD 4.0, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "646". In this situation,
- some unit tests fail.
- On MirBSD 10, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "UTF-8". */
-#if HAVE_LANGINFO_CODESET
- {
- const char *cs = nl_langinfo (CODESET);
- if (cs[0] == '\0' || strcmp (cs, "ASCII") == 0 || strcmp (cs, "646") == 0
- || strcmp (cs, "UTF-8") == 0)
- return 1;
- }
-#endif
-#ifdef __CYGWIN__
- /* On Cygwin, avoid locale names without encoding suffix, because the
- locale_charset() function relies on the encoding suffix. Note that
- LC_ALL is set on the command line. */
- if (strchr (getenv ("LC_ALL"), '.') == NULL) return 1;
-#endif
- /* Check whether MB_CUR_MAX is > 1. This excludes the dysfunctional locales
- on Cygwin 1.5.x. */
- if (MB_CUR_MAX == 1)
- return 1;
- /* Check whether in a month name, no byte in the range 0x80..0x9F occurs.
- This excludes the UTF-8 encoding (except on MirBSD). */
- t.tm_year = 1975 - 1900; t.tm_mon = 2 - 1; t.tm_mday = 4;
- if (strftime (buf, sizeof (buf), "%B", &t) < 2) return 1;
- for (p = buf; *p != '\0'; p++)
- if ((unsigned char) *p >= 0x80 && (unsigned char) *p < 0xa0)
- return 1;
- return 0;
-}
-changequote([,])dnl
- ])])
- if AC_TRY_EVAL([ac_link]) && test -s conftest$ac_exeext; then
- case "$host_os" in
- # Handle native Windows specially, because there setlocale() interprets
- # "ar" as "Arabic" or "Arabic_Saudi Arabia.1256",
- # "fr" or "fra" as "French" or "French_France.1252",
- # "ge"(!) or "deu"(!) as "German" or "German_Germany.1252",
- # "ja" as "Japanese" or "Japanese_Japan.932",
- # and similar.
- mingw*)
- # Note that on native Windows, the Japanese locale is
- # Japanese_Japan.932, and CP932 is very different from EUC-JP, so we
- # cannot use it here.
- gt_cv_locale_ja=none
- ;;
- *)
- # Setting LC_ALL is not enough. Need to set LC_TIME to empty, because
- # otherwise on MacOS X 10.3.5 the LC_TIME=C from the beginning of the
- # configure script would override the LC_ALL setting. Likewise for
- # LC_CTYPE, which is also set at the beginning of the configure script.
- # Test for the AIX locale name.
- if (LC_ALL=ja_JP LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja_JP
- else
- # Test for the locale name with explicit encoding suffix.
- if (LC_ALL=ja_JP.EUC-JP LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja_JP.EUC-JP
- else
- # Test for the HP-UX, OSF/1, NetBSD locale name.
- if (LC_ALL=ja_JP.eucJP LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja_JP.eucJP
- else
- # Test for the IRIX, FreeBSD locale name.
- if (LC_ALL=ja_JP.EUC LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja_JP.EUC
- else
- # Test for the Solaris 7 locale name.
- if (LC_ALL=ja LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_ja=ja
- else
- # Special test for NetBSD 1.6.
- if test -f /usr/share/locale/ja_JP.eucJP/LC_CTYPE; then
- gt_cv_locale_ja=ja_JP.eucJP
- else
- # None found.
- gt_cv_locale_ja=none
- fi
- fi
- fi
- fi
- fi
- fi
- ;;
- esac
- fi
- rm -fr conftest*
- ])
- LOCALE_JA=$gt_cv_locale_ja
- AC_SUBST([LOCALE_JA])
-])
+++ /dev/null
-# locale-zh.m4 serial 11
-dnl Copyright (C) 2003, 2005-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl Determine the name of a chinese locale with GB18030 encoding.
-AC_DEFUN([gt_LOCALE_ZH_CN],
-[
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AM_LANGINFO_CODESET])
- AC_CACHE_CHECK([for a transitional chinese locale], [gt_cv_locale_zh_CN], [
- AC_LANG_CONFTEST([AC_LANG_SOURCE([
-changequote(,)dnl
-#include <locale.h>
-#include <stdlib.h>
-#include <time.h>
-#if HAVE_LANGINFO_CODESET
-# include <langinfo.h>
-#endif
-#include <stdlib.h>
-#include <string.h>
-struct tm t;
-char buf[16];
-int main ()
-{
- const char *p;
- /* Check whether the given locale name is recognized by the system. */
-#if (defined _WIN32 || defined __WIN32__) && !defined __CYGWIN__
- /* On native Windows, setlocale(category, "") looks at the system settings,
- not at the environment variables. Also, when an encoding suffix such
- as ".65001" or ".54936" is specified, it succeeds but sets the LC_CTYPE
- category of the locale to "C". */
- if (setlocale (LC_ALL, getenv ("LC_ALL")) == NULL
- || strcmp (setlocale (LC_CTYPE, NULL), "C") == 0)
- return 1;
-#else
- if (setlocale (LC_ALL, "") == NULL) return 1;
-#endif
- /* Check whether nl_langinfo(CODESET) is nonempty and not "ASCII" or "646".
- On MacOS X 10.3.5 (Darwin 7.5) in the fr_FR locale, nl_langinfo(CODESET)
- is empty, and the behaviour of Tcl 8.4 in this locale is not useful.
- On OpenBSD 4.0, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "646". In this situation,
- some unit tests fail.
- On MirBSD 10, when an unsupported locale is specified, setlocale()
- succeeds but then nl_langinfo(CODESET) is "UTF-8". */
-#if HAVE_LANGINFO_CODESET
- {
- const char *cs = nl_langinfo (CODESET);
- if (cs[0] == '\0' || strcmp (cs, "ASCII") == 0 || strcmp (cs, "646") == 0
- || strcmp (cs, "UTF-8") == 0)
- return 1;
- }
-#endif
-#ifdef __CYGWIN__
- /* On Cygwin, avoid locale names without encoding suffix, because the
- locale_charset() function relies on the encoding suffix. Note that
- LC_ALL is set on the command line. */
- if (strchr (getenv ("LC_ALL"), '.') == NULL) return 1;
-#endif
- /* Check whether in a month name, no byte in the range 0x80..0x9F occurs.
- This excludes the UTF-8 encoding (except on MirBSD). */
- t.tm_year = 1975 - 1900; t.tm_mon = 2 - 1; t.tm_mday = 4;
- if (strftime (buf, sizeof (buf), "%B", &t) < 2) return 1;
- for (p = buf; *p != '\0'; p++)
- if ((unsigned char) *p >= 0x80 && (unsigned char) *p < 0xa0)
- return 1;
- /* Check whether a typical GB18030 multibyte sequence is recognized as a
- single wide character. This excludes the GB2312 and GBK encodings. */
- if (mblen ("\203\062\332\066", 5) != 4)
- return 1;
- return 0;
-}
-changequote([,])dnl
- ])])
- if AC_TRY_EVAL([ac_link]) && test -s conftest$ac_exeext; then
- case "$host_os" in
- # Handle native Windows specially, because there setlocale() interprets
- # "ar" as "Arabic" or "Arabic_Saudi Arabia.1256",
- # "fr" or "fra" as "French" or "French_France.1252",
- # "ge"(!) or "deu"(!) as "German" or "German_Germany.1252",
- # "ja" as "Japanese" or "Japanese_Japan.932",
- # and similar.
- mingw*)
- # Test for the hypothetical native Windows locale name.
- if (LC_ALL=Chinese_China.54936 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_zh_CN=Chinese_China.54936
- else
- # None found.
- gt_cv_locale_zh_CN=none
- fi
- ;;
- solaris2.8)
- # On Solaris 8, the locales zh_CN.GB18030, zh_CN.GBK, zh.GBK are
- # broken. One witness is the test case in gl_MBRTOWC_SANITYCHECK.
- # Another witness is that "LC_ALL=zh_CN.GB18030 bash -c true" dumps core.
- gt_cv_locale_zh_CN=none
- ;;
- *)
- # Setting LC_ALL is not enough. Need to set LC_TIME to empty, because
- # otherwise on MacOS X 10.3.5 the LC_TIME=C from the beginning of the
- # configure script would override the LC_ALL setting. Likewise for
- # LC_CTYPE, which is also set at the beginning of the configure script.
- # Test for the locale name without encoding suffix.
- if (LC_ALL=zh_CN LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_zh_CN=zh_CN
- else
- # Test for the locale name with explicit encoding suffix.
- if (LC_ALL=zh_CN.GB18030 LC_TIME= LC_CTYPE= ./conftest; exit) 2>/dev/null; then
- gt_cv_locale_zh_CN=zh_CN.GB18030
- else
- # None found.
- gt_cv_locale_zh_CN=none
- fi
- fi
- ;;
- esac
- else
- # If there was a link error, due to mblen(), the system is so old that
- # it certainly doesn't have a chinese locale.
- gt_cv_locale_zh_CN=none
- fi
- rm -fr conftest*
- ])
- LOCALE_ZH_CN=$gt_cv_locale_zh_CN
- AC_SUBST([LOCALE_ZH_CN])
-])
+++ /dev/null
-# mbrtowc.m4 serial 25
-dnl Copyright (C) 2001-2002, 2004-2005, 2008-2012 Free Software Foundation,
-dnl Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_FUNC_MBRTOWC],
-[
- AC_REQUIRE([gl_WCHAR_H_DEFAULTS])
-
- AC_REQUIRE([AC_TYPE_MBSTATE_T])
- gl_MBSTATE_T_BROKEN
-
- AC_CHECK_FUNCS_ONCE([mbrtowc])
- if test $ac_cv_func_mbrtowc = no; then
- HAVE_MBRTOWC=0
- AC_CHECK_DECLS([mbrtowc],,, [[
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-]])
- if test $ac_cv_have_decl_mbrtowc = yes; then
- dnl On Minix 3.1.8, the system's <wchar.h> declares mbrtowc() although
- dnl it does not have the function. Avoid a collision with gnulib's
- dnl replacement.
- REPLACE_MBRTOWC=1
- fi
- else
- if test $REPLACE_MBSTATE_T = 1; then
- REPLACE_MBRTOWC=1
- else
- gl_MBRTOWC_NULL_ARG1
- gl_MBRTOWC_NULL_ARG2
- gl_MBRTOWC_RETVAL
- gl_MBRTOWC_NUL_RETVAL
- case "$gl_cv_func_mbrtowc_null_arg1" in
- *yes) ;;
- *) AC_DEFINE([MBRTOWC_NULL_ARG1_BUG], [1],
- [Define if the mbrtowc function has the NULL pwc argument bug.])
- REPLACE_MBRTOWC=1
- ;;
- esac
- case "$gl_cv_func_mbrtowc_null_arg2" in
- *yes) ;;
- *) AC_DEFINE([MBRTOWC_NULL_ARG2_BUG], [1],
- [Define if the mbrtowc function has the NULL string argument bug.])
- REPLACE_MBRTOWC=1
- ;;
- esac
- case "$gl_cv_func_mbrtowc_retval" in
- *yes) ;;
- *) AC_DEFINE([MBRTOWC_RETVAL_BUG], [1],
- [Define if the mbrtowc function returns a wrong return value.])
- REPLACE_MBRTOWC=1
- ;;
- esac
- case "$gl_cv_func_mbrtowc_nul_retval" in
- *yes) ;;
- *) AC_DEFINE([MBRTOWC_NUL_RETVAL_BUG], [1],
- [Define if the mbrtowc function does not return 0 for a NUL character.])
- REPLACE_MBRTOWC=1
- ;;
- esac
- fi
- fi
-])
-
-dnl Test whether mbsinit() and mbrtowc() need to be overridden in a way that
-dnl redefines the semantics of the given mbstate_t type.
-dnl Result is REPLACE_MBSTATE_T.
-dnl When this is set to 1, we replace both mbsinit() and mbrtowc(), in order to
-dnl avoid inconsistencies.
-
-AC_DEFUN([gl_MBSTATE_T_BROKEN],
-[
- AC_REQUIRE([gl_WCHAR_H_DEFAULTS])
-
- AC_REQUIRE([AC_TYPE_MBSTATE_T])
- AC_CHECK_FUNCS_ONCE([mbsinit])
- AC_CHECK_FUNCS_ONCE([mbrtowc])
- if test $ac_cv_func_mbsinit = yes && test $ac_cv_func_mbrtowc = yes; then
- gl_MBRTOWC_INCOMPLETE_STATE
- gl_MBRTOWC_SANITYCHECK
- REPLACE_MBSTATE_T=0
- case "$gl_cv_func_mbrtowc_incomplete_state" in
- *yes) ;;
- *) REPLACE_MBSTATE_T=1 ;;
- esac
- case "$gl_cv_func_mbrtowc_sanitycheck" in
- *yes) ;;
- *) REPLACE_MBSTATE_T=1 ;;
- esac
- else
- REPLACE_MBSTATE_T=1
- fi
-])
-
-dnl Test whether mbrtowc puts the state into non-initial state when parsing an
-dnl incomplete multibyte character.
-dnl Result is gl_cv_func_mbrtowc_incomplete_state.
-
-AC_DEFUN([gl_MBRTOWC_INCOMPLETE_STATE],
-[
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([gt_LOCALE_JA])
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
- AC_CACHE_CHECK([whether mbrtowc handles incomplete characters],
- [gl_cv_func_mbrtowc_incomplete_state],
- [
- dnl Initial guess, used when cross-compiling or when no suitable locale
- dnl is present.
-changequote(,)dnl
- case "$host_os" in
- # Guess no on AIX and OSF/1.
- aix* | osf*) gl_cv_func_mbrtowc_incomplete_state="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_incomplete_state="guessing yes" ;;
- esac
-changequote([,])dnl
- if test $LOCALE_JA != none; then
- AC_RUN_IFELSE(
- [AC_LANG_SOURCE([[
-#include <locale.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- if (setlocale (LC_ALL, "$LOCALE_JA") != NULL)
- {
- const char input[] = "B\217\253\344\217\251\316er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 1, 1, &state) == (size_t)(-2))
- if (mbsinit (&state))
- return 1;
- }
- return 0;
-}]])],
- [gl_cv_func_mbrtowc_incomplete_state=yes],
- [gl_cv_func_mbrtowc_incomplete_state=no],
- [:])
- fi
- ])
-])
-
-dnl Test whether mbrtowc works not worse than mbtowc.
-dnl Result is gl_cv_func_mbrtowc_sanitycheck.
-
-AC_DEFUN([gl_MBRTOWC_SANITYCHECK],
-[
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([gt_LOCALE_ZH_CN])
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
- AC_CACHE_CHECK([whether mbrtowc works as well as mbtowc],
- [gl_cv_func_mbrtowc_sanitycheck],
- [
- dnl Initial guess, used when cross-compiling or when no suitable locale
- dnl is present.
-changequote(,)dnl
- case "$host_os" in
- # Guess no on Solaris 8.
- solaris2.8) gl_cv_func_mbrtowc_sanitycheck="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_sanitycheck="guessing yes" ;;
- esac
-changequote([,])dnl
- if test $LOCALE_ZH_CN != none; then
- AC_RUN_IFELSE(
- [AC_LANG_SOURCE([[
-#include <locale.h>
-#include <stdlib.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- /* This fails on Solaris 8:
- mbrtowc returns 2, and sets wc to 0x00F0.
- mbtowc returns 4 (correct) and sets wc to 0x5EDC. */
- if (setlocale (LC_ALL, "$LOCALE_ZH_CN") != NULL)
- {
- char input[] = "B\250\271\201\060\211\070er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 3, 6, &state) != 4
- && mbtowc (&wc, input + 3, 6) == 4)
- return 1;
- }
- return 0;
-}]])],
- [gl_cv_func_mbrtowc_sanitycheck=yes],
- [gl_cv_func_mbrtowc_sanitycheck=no],
- [:])
- fi
- ])
-])
-
-dnl Test whether mbrtowc supports a NULL pwc argument correctly.
-dnl Result is gl_cv_func_mbrtowc_null_arg1.
-
-AC_DEFUN([gl_MBRTOWC_NULL_ARG1],
-[
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([gt_LOCALE_FR_UTF8])
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
- AC_CACHE_CHECK([whether mbrtowc handles a NULL pwc argument],
- [gl_cv_func_mbrtowc_null_arg1],
- [
- dnl Initial guess, used when cross-compiling or when no suitable locale
- dnl is present.
-changequote(,)dnl
- case "$host_os" in
- # Guess no on Solaris.
- solaris*) gl_cv_func_mbrtowc_null_arg1="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_null_arg1="guessing yes" ;;
- esac
-changequote([,])dnl
- if test $LOCALE_FR_UTF8 != none; then
- AC_RUN_IFELSE(
- [AC_LANG_SOURCE([[
-#include <locale.h>
-#include <stdlib.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- int result = 0;
-
- if (setlocale (LC_ALL, "$LOCALE_FR_UTF8") != NULL)
- {
- char input[] = "\303\237er";
- mbstate_t state;
- wchar_t wc;
- size_t ret;
-
- memset (&state, '\0', sizeof (mbstate_t));
- wc = (wchar_t) 0xBADFACE;
- ret = mbrtowc (&wc, input, 5, &state);
- if (ret != 2)
- result |= 1;
- if (!mbsinit (&state))
- result |= 2;
-
- memset (&state, '\0', sizeof (mbstate_t));
- ret = mbrtowc (NULL, input, 5, &state);
- if (ret != 2) /* Solaris 7 fails here: ret is -1. */
- result |= 4;
- if (!mbsinit (&state))
- result |= 8;
- }
- return result;
-}]])],
- [gl_cv_func_mbrtowc_null_arg1=yes],
- [gl_cv_func_mbrtowc_null_arg1=no],
- [:])
- fi
- ])
-])
-
-dnl Test whether mbrtowc supports a NULL string argument correctly.
-dnl Result is gl_cv_func_mbrtowc_null_arg2.
-
-AC_DEFUN([gl_MBRTOWC_NULL_ARG2],
-[
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([gt_LOCALE_FR_UTF8])
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
- AC_CACHE_CHECK([whether mbrtowc handles a NULL string argument],
- [gl_cv_func_mbrtowc_null_arg2],
- [
- dnl Initial guess, used when cross-compiling or when no suitable locale
- dnl is present.
-changequote(,)dnl
- case "$host_os" in
- # Guess no on OSF/1.
- osf*) gl_cv_func_mbrtowc_null_arg2="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_null_arg2="guessing yes" ;;
- esac
-changequote([,])dnl
- if test $LOCALE_FR_UTF8 != none; then
- AC_RUN_IFELSE(
- [AC_LANG_SOURCE([[
-#include <locale.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- if (setlocale (LC_ALL, "$LOCALE_FR_UTF8") != NULL)
- {
- mbstate_t state;
- wchar_t wc;
- int ret;
-
- memset (&state, '\0', sizeof (mbstate_t));
- wc = (wchar_t) 0xBADFACE;
- mbrtowc (&wc, NULL, 5, &state);
- /* Check that wc was not modified. */
- if (wc != (wchar_t) 0xBADFACE)
- return 1;
- }
- return 0;
-}]])],
- [gl_cv_func_mbrtowc_null_arg2=yes],
- [gl_cv_func_mbrtowc_null_arg2=no],
- [:])
- fi
- ])
-])
-
-dnl Test whether mbrtowc, when parsing the end of a multibyte character,
-dnl correctly returns the number of bytes that were needed to complete the
-dnl character (not the total number of bytes of the multibyte character).
-dnl Result is gl_cv_func_mbrtowc_retval.
-
-AC_DEFUN([gl_MBRTOWC_RETVAL],
-[
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([gt_LOCALE_FR_UTF8])
- AC_REQUIRE([gt_LOCALE_JA])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_CACHE_CHECK([whether mbrtowc has a correct return value],
- [gl_cv_func_mbrtowc_retval],
- [
- dnl Initial guess, used when cross-compiling or when no suitable locale
- dnl is present.
-changequote(,)dnl
- case "$host_os" in
- # Guess no on HP-UX, Solaris, native Windows.
- hpux* | solaris* | mingw*) gl_cv_func_mbrtowc_retval="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_retval="guessing yes" ;;
- esac
-changequote([,])dnl
- if test $LOCALE_FR_UTF8 != none || test $LOCALE_JA != none \
- || { case "$host_os" in mingw*) true;; *) false;; esac; }; then
- AC_RUN_IFELSE(
- [AC_LANG_SOURCE([[
-#include <locale.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- int result = 0;
- int found_some_locale = 0;
- /* This fails on Solaris. */
- if (setlocale (LC_ALL, "$LOCALE_FR_UTF8") != NULL)
- {
- char input[] = "B\303\274\303\237er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 1, 1, &state) == (size_t)(-2))
- {
- input[1] = '\0';
- if (mbrtowc (&wc, input + 2, 5, &state) != 1)
- result |= 1;
- }
- found_some_locale = 1;
- }
- /* This fails on HP-UX 11.11. */
- if (setlocale (LC_ALL, "$LOCALE_JA") != NULL)
- {
- char input[] = "B\217\253\344\217\251\316er"; /* "Büßer" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 1, 1, &state) == (size_t)(-2))
- {
- input[1] = '\0';
- if (mbrtowc (&wc, input + 2, 5, &state) != 2)
- result |= 2;
- }
- found_some_locale = 1;
- }
- /* This fails on native Windows. */
- if (setlocale (LC_ALL, "Japanese_Japan.932") != NULL)
- {
- char input[] = "<\223\372\226\173\214\352>"; /* "<日本語>" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 3, 1, &state) == (size_t)(-2))
- {
- input[3] = '\0';
- if (mbrtowc (&wc, input + 4, 4, &state) != 1)
- result |= 4;
- }
- found_some_locale = 1;
- }
- if (setlocale (LC_ALL, "Chinese_Taiwan.950") != NULL)
- {
- char input[] = "<\244\351\245\273\273\171>"; /* "<日本語>" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 3, 1, &state) == (size_t)(-2))
- {
- input[3] = '\0';
- if (mbrtowc (&wc, input + 4, 4, &state) != 1)
- result |= 8;
- }
- found_some_locale = 1;
- }
- if (setlocale (LC_ALL, "Chinese_China.936") != NULL)
- {
- char input[] = "<\310\325\261\276\325\132>"; /* "<日本語>" */
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, input + 3, 1, &state) == (size_t)(-2))
- {
- input[3] = '\0';
- if (mbrtowc (&wc, input + 4, 4, &state) != 1)
- result |= 16;
- }
- found_some_locale = 1;
- }
- return (found_some_locale ? result : 77);
-}]])],
- [gl_cv_func_mbrtowc_retval=yes],
- [if test $? != 77; then
- gl_cv_func_mbrtowc_retval=no
- fi
- ],
- [:])
- fi
- ])
-])
-
-dnl Test whether mbrtowc, when parsing a NUL character, correctly returns 0.
-dnl Result is gl_cv_func_mbrtowc_nul_retval.
-
-AC_DEFUN([gl_MBRTOWC_NUL_RETVAL],
-[
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([gt_LOCALE_ZH_CN])
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
- AC_CACHE_CHECK([whether mbrtowc returns 0 when parsing a NUL character],
- [gl_cv_func_mbrtowc_nul_retval],
- [
- dnl Initial guess, used when cross-compiling or when no suitable locale
- dnl is present.
-changequote(,)dnl
- case "$host_os" in
- # Guess no on Solaris 8 and 9.
- solaris2.[89]) gl_cv_func_mbrtowc_nul_retval="guessing no" ;;
- # Guess yes otherwise.
- *) gl_cv_func_mbrtowc_nul_retval="guessing yes" ;;
- esac
-changequote([,])dnl
- if test $LOCALE_ZH_CN != none; then
- AC_RUN_IFELSE(
- [AC_LANG_SOURCE([[
-#include <locale.h>
-#include <string.h>
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int main ()
-{
- /* This fails on Solaris 8 and 9. */
- if (setlocale (LC_ALL, "$LOCALE_ZH_CN") != NULL)
- {
- mbstate_t state;
- wchar_t wc;
-
- memset (&state, '\0', sizeof (mbstate_t));
- if (mbrtowc (&wc, "", 1, &state) != 0)
- return 1;
- }
- return 0;
-}]])],
- [gl_cv_func_mbrtowc_nul_retval=yes],
- [gl_cv_func_mbrtowc_nul_retval=no],
- [:])
- fi
- ])
-])
-
-# Prerequisites of lib/mbrtowc.c.
-AC_DEFUN([gl_PREREQ_MBRTOWC], [
- :
-])
-
-
-dnl From Paul Eggert
-
-dnl This is an override of an autoconf macro.
-
-AC_DEFUN([AC_FUNC_MBRTOWC],
-[
- dnl Same as AC_FUNC_MBRTOWC in autoconf-2.60.
- AC_CACHE_CHECK([whether mbrtowc and mbstate_t are properly declared],
- gl_cv_func_mbrtowc,
- [AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be
- included before <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h>
- must be included before <wchar.h>. */
- #include <stddef.h>
- #include <stdio.h>
- #include <time.h>
- #include <wchar.h>]],
- [[wchar_t wc;
- char const s[] = "";
- size_t n = 1;
- mbstate_t state;
- return ! (sizeof state && (mbrtowc) (&wc, s, n, &state));]])],
- gl_cv_func_mbrtowc=yes,
- gl_cv_func_mbrtowc=no)])
- if test $gl_cv_func_mbrtowc = yes; then
- AC_DEFINE([HAVE_MBRTOWC], [1],
- [Define to 1 if mbrtowc and mbstate_t are properly declared.])
- fi
-])
+++ /dev/null
-# mbsinit.m4 serial 8
-dnl Copyright (C) 2008, 2010-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_FUNC_MBSINIT],
-[
- AC_REQUIRE([gl_WCHAR_H_DEFAULTS])
- AC_REQUIRE([AC_CANONICAL_HOST])
-
- AC_REQUIRE([AC_TYPE_MBSTATE_T])
- gl_MBSTATE_T_BROKEN
-
- AC_CHECK_FUNCS_ONCE([mbsinit])
- if test $ac_cv_func_mbsinit = no; then
- HAVE_MBSINIT=0
- AC_CHECK_DECLS([mbsinit],,, [[
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-]])
- if test $ac_cv_have_decl_mbsinit = yes; then
- dnl On Minix 3.1.8, the system's <wchar.h> declares mbsinit() although
- dnl it does not have the function. Avoid a collision with gnulib's
- dnl replacement.
- REPLACE_MBSINIT=1
- fi
- else
- if test $REPLACE_MBSTATE_T = 1; then
- REPLACE_MBSINIT=1
- else
- dnl On mingw, mbsinit() always returns 1, which is inappropriate for
- dnl states produced by mbrtowc() for an incomplete multibyte character
- dnl in multibyte locales.
- case "$host_os" in
- mingw*) REPLACE_MBSINIT=1 ;;
- esac
- fi
- fi
-])
-
-# Prerequisites of lib/mbsinit.c.
-AC_DEFUN([gl_PREREQ_MBSINIT], [
- :
-])
+++ /dev/null
-# mbstate_t.m4 serial 13
-dnl Copyright (C) 2000-2002, 2008-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-# From Paul Eggert.
-
-# BeOS 5 has <wchar.h> but does not define mbstate_t,
-# so you can't declare an object of that type.
-# Check for this incompatibility with Standard C.
-
-# AC_TYPE_MBSTATE_T
-# -----------------
-AC_DEFUN([AC_TYPE_MBSTATE_T],
-[
- AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS]) dnl for HP-UX 11.11
-
- AC_CACHE_CHECK([for mbstate_t], [ac_cv_type_mbstate_t],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [AC_INCLUDES_DEFAULT[
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>]],
- [[mbstate_t x; return sizeof x;]])],
- [ac_cv_type_mbstate_t=yes],
- [ac_cv_type_mbstate_t=no])])
- if test $ac_cv_type_mbstate_t = yes; then
- AC_DEFINE([HAVE_MBSTATE_T], [1],
- [Define to 1 if <wchar.h> declares mbstate_t.])
- else
- AC_DEFINE([mbstate_t], [int],
- [Define to a type if <wchar.h> does not define.])
- fi
-])
+++ /dev/null
-# msvc-inval.m4 serial 1
-dnl Copyright (C) 2011-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_MSVC_INVAL],
-[
- AC_CHECK_FUNCS_ONCE([_set_invalid_parameter_handler])
- if test $ac_cv_func__set_invalid_parameter_handler = yes; then
- HAVE_MSVC_INVALID_PARAMETER_HANDLER=1
- AC_DEFINE([HAVE_MSVC_INVALID_PARAMETER_HANDLER], [1],
- [Define to 1 on MSVC platforms that have the "invalid parameter handler"
- concept.])
- else
- HAVE_MSVC_INVALID_PARAMETER_HANDLER=0
- fi
- AC_SUBST([HAVE_MSVC_INVALID_PARAMETER_HANDLER])
-])
+++ /dev/null
-# msvc-nothrow.m4 serial 1
-dnl Copyright (C) 2011-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_MSVC_NOTHROW],
-[
- AC_REQUIRE([gl_MSVC_INVAL])
-])
+++ /dev/null
-# nls.m4 serial 5 (gettext-0.18)
-dnl Copyright (C) 1995-2003, 2005-2006, 2008-2012 Free Software Foundation,
-dnl Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_NLS],
-[
- AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE([nls],
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT([$USE_NLS])
- AC_SUBST([USE_NLS])
-])
+++ /dev/null
-# nocrash.m4 serial 3
-dnl Copyright (C) 2005, 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Based on libsigsegv, from Bruno Haible and Paolo Bonzini.
-
-AC_PREREQ([2.13])
-
-dnl Expands to some code for use in .c programs that will cause the configure
-dnl test to exit instead of crashing. This is useful to avoid triggering
-dnl action from a background debugger and to avoid core dumps.
-dnl Usage: ...
-dnl ]GL_NOCRASH[
-dnl ...
-dnl int main() { nocrash_init(); ... }
-AC_DEFUN([GL_NOCRASH],[[
-#include <stdlib.h>
-#if defined __MACH__ && defined __APPLE__
-/* Avoid a crash on MacOS X. */
-#include <mach/mach.h>
-#include <mach/mach_error.h>
-#include <mach/thread_status.h>
-#include <mach/exception.h>
-#include <mach/task.h>
-#include <pthread.h>
-/* The exception port on which our thread listens. */
-static mach_port_t our_exception_port;
-/* The main function of the thread listening for exceptions of type
- EXC_BAD_ACCESS. */
-static void *
-mach_exception_thread (void *arg)
-{
- /* Buffer for a message to be received. */
- struct {
- mach_msg_header_t head;
- mach_msg_body_t msgh_body;
- char data[1024];
- } msg;
- mach_msg_return_t retval;
- /* Wait for a message on the exception port. */
- retval = mach_msg (&msg.head, MACH_RCV_MSG | MACH_RCV_LARGE, 0, sizeof (msg),
- our_exception_port, MACH_MSG_TIMEOUT_NONE, MACH_PORT_NULL);
- if (retval != MACH_MSG_SUCCESS)
- abort ();
- exit (1);
-}
-static void
-nocrash_init (void)
-{
- mach_port_t self = mach_task_self ();
- /* Allocate a port on which the thread shall listen for exceptions. */
- if (mach_port_allocate (self, MACH_PORT_RIGHT_RECEIVE, &our_exception_port)
- == KERN_SUCCESS) {
- /* See http://web.mit.edu/darwin/src/modules/xnu/osfmk/man/mach_port_insert_right.html. */
- if (mach_port_insert_right (self, our_exception_port, our_exception_port,
- MACH_MSG_TYPE_MAKE_SEND)
- == KERN_SUCCESS) {
- /* The exceptions we want to catch. Only EXC_BAD_ACCESS is interesting
- for us. */
- exception_mask_t mask = EXC_MASK_BAD_ACCESS;
- /* Create the thread listening on the exception port. */
- pthread_attr_t attr;
- pthread_t thread;
- if (pthread_attr_init (&attr) == 0
- && pthread_attr_setdetachstate (&attr, PTHREAD_CREATE_DETACHED) == 0
- && pthread_create (&thread, &attr, mach_exception_thread, NULL) == 0) {
- pthread_attr_destroy (&attr);
- /* Replace the exception port info for these exceptions with our own.
- Note that we replace the exception port for the entire task, not only
- for a particular thread. This has the effect that when our exception
- port gets the message, the thread specific exception port has already
- been asked, and we don't need to bother about it.
- See http://web.mit.edu/darwin/src/modules/xnu/osfmk/man/task_set_exception_ports.html. */
- task_set_exception_ports (self, mask, our_exception_port,
- EXCEPTION_DEFAULT, MACHINE_THREAD_STATE);
- }
- }
- }
-}
-#elif (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
-/* Avoid a crash on native Windows. */
-#define WIN32_LEAN_AND_MEAN
-#include <windows.h>
-#include <winerror.h>
-static LONG WINAPI
-exception_filter (EXCEPTION_POINTERS *ExceptionInfo)
-{
- switch (ExceptionInfo->ExceptionRecord->ExceptionCode)
- {
- case EXCEPTION_ACCESS_VIOLATION:
- case EXCEPTION_IN_PAGE_ERROR:
- case EXCEPTION_STACK_OVERFLOW:
- case EXCEPTION_GUARD_PAGE:
- case EXCEPTION_PRIV_INSTRUCTION:
- case EXCEPTION_ILLEGAL_INSTRUCTION:
- case EXCEPTION_DATATYPE_MISALIGNMENT:
- case EXCEPTION_ARRAY_BOUNDS_EXCEEDED:
- case EXCEPTION_NONCONTINUABLE_EXCEPTION:
- exit (1);
- }
- return EXCEPTION_CONTINUE_SEARCH;
-}
-static void
-nocrash_init (void)
-{
- SetUnhandledExceptionFilter ((LPTOP_LEVEL_EXCEPTION_FILTER) exception_filter);
-}
-#else
-/* Avoid a crash on POSIX systems. */
-#include <signal.h>
-/* A POSIX signal handler. */
-static void
-exception_handler (int sig)
-{
- exit (1);
-}
-static void
-nocrash_init (void)
-{
-#ifdef SIGSEGV
- signal (SIGSEGV, exception_handler);
-#endif
-#ifdef SIGBUS
- signal (SIGBUS, exception_handler);
-#endif
-}
-#endif
-]])
+++ /dev/null
-# po.m4 serial 17b
-dnl Copyright (C) 1995-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.50])
-
-dnl Checks for all prerequisites of the po subdirectory.
-AC_DEFUN([AM_PO_SUBDIRS],
-[
- AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
- AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake
- AC_REQUIRE([AM_NLS])dnl
-
- dnl Release version of the gettext macros. This is used to ensure that
- dnl the gettext macros and po/Makefile.in.in are in sync.
- AC_SUBST([GETTEXT_MACRO_VERSION], [0.18])
-
- dnl Perform the following tests also if --disable-nls has been given,
- dnl because they are needed for "make dist" to work.
-
- dnl Search for GNU msgfmt in the PATH.
- dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
- dnl The second test excludes FreeBSD msgfmt.
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
-
- dnl Test whether it is GNU msgfmt >= 0.15.
-changequote(,)dnl
- case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
- *) MSGFMT_015=$MSGFMT ;;
- esac
-changequote([,])dnl
- AC_SUBST([MSGFMT_015])
-changequote(,)dnl
- case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
- *) GMSGFMT_015=$GMSGFMT ;;
- esac
-changequote([,])dnl
- AC_SUBST([GMSGFMT_015])
-
- dnl Search for GNU xgettext 0.12 or newer in the PATH.
- dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
- dnl The second test excludes FreeBSD xgettext.
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- dnl Remove leftover from FreeBSD xgettext call.
- rm -f messages.po
-
- dnl Test whether it is GNU xgettext >= 0.15.
-changequote(,)dnl
- case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
- *) XGETTEXT_015=$XGETTEXT ;;
- esac
-changequote([,])dnl
- AC_SUBST([XGETTEXT_015])
-
- dnl Search for GNU msgmerge 0.11 or newer in the PATH.
- AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
- [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
-
- dnl Installation directories.
- dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
- dnl have to define it here, so that it can be used in po/Makefile.
- test -n "$localedir" || localedir='${datadir}/locale'
- AC_SUBST([localedir])
-
- dnl Support for AM_XGETTEXT_OPTION.
- test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
- AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
-
- AC_CONFIG_COMMANDS([po-directories], [[
- for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- # Treat a directory as a PO directory if and only if it has a
- # POTFILES.in file. This allows packages to have multiple PO
- # directories under different names or in different locations.
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- gt_tab=`printf '\t'`
- cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
- POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
- # on $ac_dir but don't depend on user-specified configuration
- # parameters.
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- # Hide the ALL_LINGUAS assignment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # The set of available languages was given in configure.in.
- # Hide the ALL_LINGUAS assignment from automake < 1.5.
- eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- done
- fi
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
- if test -f "$f"; then
- case "$f" in
- *.orig | *.bak | *~) ;;
- *) cat "$f" >> "$ac_dir/Makefile" ;;
- esac
- fi
- done
- fi
- ;;
- esac
- done]],
- [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
- # from automake < 1.5.
- eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
- # Capture the value of LINGUAS because we need it to compute CATALOGS.
- LINGUAS="${LINGUAS-%UNSET%}"
- ])
-])
-
-dnl Postprocesses a Makefile in a directory containing PO files.
-AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
-[
- # When this code is run, in config.status, two variables have already been
- # set:
- # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
- # - LINGUAS is the value of the environment variable LINGUAS at configure
- # time.
-
-changequote(,)dnl
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
-
- # Find a way to echo strings without interpreting backslash.
- if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='echo'
- else
- if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='printf %s\n'
- else
- echo_func () {
- cat <<EOT
-$*
-EOT
- }
- gt_echo='echo_func'
- fi
- fi
-
- # A sed script that extracts the value of VARIABLE from a Makefile.
- tab=`printf '\t'`
- sed_x_variable='
-# Test if the hold space is empty.
-x
-s/P/P/
-x
-ta
-# Yes it was empty. Look if we have the expected variable definition.
-/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
- # Seen the first line of the variable definition.
- s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
- ba
-}
-bd
-:a
-# Here we are processing a line from the variable definition.
-# Remove comment, more precisely replace it with a space.
-s/#.*$/ /
-# See if the line ends in a backslash.
-tb
-:b
-s/\\$//
-# Print the line, without the trailing backslash.
-p
-tc
-# There was no trailing backslash. The end of the variable definition is
-# reached. Clear the hold space.
-s/^.*$//
-x
-bd
-:c
-# A trailing backslash means that the variable definition continues in the
-# next line. Put a nonempty string into the hold space to indicate this.
-s/^.*$/P/
-x
-:d
-'
-changequote([,])dnl
-
- # Set POTFILES to the value of the Makefile variable POTFILES.
- sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
- POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
- # Compute POTFILES_DEPS as
- # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
- POTFILES_DEPS=
- for file in $POTFILES; do
- POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
- done
- POMAKEFILEDEPS=""
-
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
- sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
- ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
- fi
- # Hide the ALL_LINGUAS assignment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- # Compute PROPERTIESFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
- # Compute CLASSFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
- # Compute QMFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
- # Compute MSGFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
- # Compute RESOURCESDLLFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- PROPERTIESFILES=
- CLASSFILES=
- QMFILES=
- MSGFILES=
- RESOURCESDLLFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
- CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
- QMFILES="$QMFILES $srcdirpre$lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- JAVACATALOGS=
- QTCATALOGS=
- TCLCATALOGS=
- CSHARPCATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
- QTCATALOGS="$QTCATALOGS $lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
- done
- fi
-
- sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
- tab=`printf '\t'`
- if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang.msg: $lang.po
-${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
-${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
-${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
-${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if test -n "$POMAKEFILEDEPS"; then
- cat >> "$ac_file.tmp" <<EOF
-Makefile: $POMAKEFILEDEPS
-EOF
- fi
- mv "$ac_file.tmp" "$ac_file"
-])
-
-dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
-AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
-[
- XGETTEXT_EXTRA_OPTIONS=
-])
-
-dnl Registers an option to be passed to xgettext in the po subdirectory.
-AC_DEFUN([AM_XGETTEXT_OPTION],
-[
- AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
- XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
-])
+++ /dev/null
-# progtest.m4 serial 7 (gettext-0.18.2)
-dnl Copyright (C) 1996-2003, 2005, 2008-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-AC_PREREQ([2.50])
-
-# Search path for a program which passes the given test.
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN([AM_PATH_PROG_WITH_TEST],
-[
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
- # contains only /bin. Note that ksh looks also at the FPATH variable,
- # so we have to set that as well for the test.
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
- || PATH_SEPARATOR=';'
- }
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL([ac_cv_path_$1],
-[case "[$]$1" in
- [[\\/]]* | ?:[[\\/]]*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
- AC_MSG_RESULT([$][$1])
-else
- AC_MSG_RESULT([no])
-fi
-AC_SUBST([$1])dnl
-])
+++ /dev/null
-# quotearg.m4 serial 9
-dnl Copyright (C) 2002, 2004-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_QUOTEARG],
-[
- :
-])
+++ /dev/null
-# ssize_t.m4 serial 5 (gettext-0.18.2)
-dnl Copyright (C) 2001-2003, 2006, 2010-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-dnl Test whether ssize_t is defined.
-
-AC_DEFUN([gt_TYPE_SSIZE_T],
-[
- AC_CACHE_CHECK([for ssize_t], [gt_cv_ssize_t],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <sys/types.h>]],
- [[int x = sizeof (ssize_t *) + sizeof (ssize_t);
- return !x;]])],
- [gt_cv_ssize_t=yes], [gt_cv_ssize_t=no])])
- if test $gt_cv_ssize_t = no; then
- AC_DEFINE([ssize_t], [int],
- [Define as a signed type of the same size as size_t.])
- fi
-])
+++ /dev/null
-# Check for stdbool.h that conforms to C99.
-
-dnl Copyright (C) 2002-2006, 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# Prepare for substituting <stdbool.h> if it is not supported.
-
-AC_DEFUN([AM_STDBOOL_H],
-[
- AC_REQUIRE([AC_CHECK_HEADER_STDBOOL])
-
- # Define two additional variables used in the Makefile substitution.
-
- if test "$ac_cv_header_stdbool_h" = yes; then
- STDBOOL_H=''
- else
- STDBOOL_H='stdbool.h'
- fi
- AC_SUBST([STDBOOL_H])
- AM_CONDITIONAL([GL_GENERATE_STDBOOL_H], [test -n "$STDBOOL_H"])
-
- if test "$ac_cv_type__Bool" = yes; then
- HAVE__BOOL=1
- else
- HAVE__BOOL=0
- fi
- AC_SUBST([HAVE__BOOL])
-])
-
-# AM_STDBOOL_H will be renamed to gl_STDBOOL_H in the future.
-AC_DEFUN([gl_STDBOOL_H], [AM_STDBOOL_H])
-
-# This version of the macro is needed in autoconf <= 2.68.
-
-AC_DEFUN([AC_CHECK_HEADER_STDBOOL],
- [AC_CACHE_CHECK([for stdbool.h that conforms to C99],
- [ac_cv_header_stdbool_h],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[
- #include <stdbool.h>
- #ifndef bool
- "error: bool is not defined"
- #endif
- #ifndef false
- "error: false is not defined"
- #endif
- #if false
- "error: false is not 0"
- #endif
- #ifndef true
- "error: true is not defined"
- #endif
- #if true != 1
- "error: true is not 1"
- #endif
- #ifndef __bool_true_false_are_defined
- "error: __bool_true_false_are_defined is not defined"
- #endif
-
- struct s { _Bool s: 1; _Bool t; } s;
-
- char a[true == 1 ? 1 : -1];
- char b[false == 0 ? 1 : -1];
- char c[__bool_true_false_are_defined == 1 ? 1 : -1];
- char d[(bool) 0.5 == true ? 1 : -1];
- /* See body of main program for 'e'. */
- char f[(_Bool) 0.0 == false ? 1 : -1];
- char g[true];
- char h[sizeof (_Bool)];
- char i[sizeof s.t];
- enum { j = false, k = true, l = false * true, m = true * 256 };
- /* The following fails for
- HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */
- _Bool n[m];
- char o[sizeof n == m * sizeof n[0] ? 1 : -1];
- char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1];
- /* Catch a bug in an HP-UX C compiler. See
- http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
- http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
- */
- _Bool q = true;
- _Bool *pq = &q;
- ]],
- [[
- bool e = &s;
- *pq |= q;
- *pq |= ! q;
- /* Refer to every declared value, to avoid compiler optimizations. */
- return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l
- + !m + !n + !o + !p + !q + !pq);
- ]])],
- [ac_cv_header_stdbool_h=yes],
- [ac_cv_header_stdbool_h=no])])
- AC_CHECK_TYPES([_Bool])
-])
+++ /dev/null
-dnl A placeholder for POSIX 2008 <stddef.h>, for platforms that have issues.
-# stddef_h.m4 serial 4
-dnl Copyright (C) 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_STDDEF_H],
-[
- AC_REQUIRE([gl_STDDEF_H_DEFAULTS])
- AC_REQUIRE([gt_TYPE_WCHAR_T])
- STDDEF_H=
- if test $gt_cv_c_wchar_t = no; then
- HAVE_WCHAR_T=0
- STDDEF_H=stddef.h
- fi
- AC_CACHE_CHECK([whether NULL can be used in arbitrary expressions],
- [gl_cv_decl_null_works],
- [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <stddef.h>
- int test[2 * (sizeof NULL == sizeof (void *)) -1];
-]])],
- [gl_cv_decl_null_works=yes],
- [gl_cv_decl_null_works=no])])
- if test $gl_cv_decl_null_works = no; then
- REPLACE_NULL=1
- STDDEF_H=stddef.h
- fi
- AC_SUBST([STDDEF_H])
- AM_CONDITIONAL([GL_GENERATE_STDDEF_H], [test -n "$STDDEF_H"])
- if test -n "$STDDEF_H"; then
- gl_NEXT_HEADERS([stddef.h])
- fi
-])
-
-AC_DEFUN([gl_STDDEF_MODULE_INDICATOR],
-[
- dnl Use AC_REQUIRE here, so that the default settings are expanded once only.
- AC_REQUIRE([gl_STDDEF_H_DEFAULTS])
- gl_MODULE_INDICATOR_SET_VARIABLE([$1])
-])
-
-AC_DEFUN([gl_STDDEF_H_DEFAULTS],
-[
- dnl Assume proper GNU behavior unless another module says otherwise.
- REPLACE_NULL=0; AC_SUBST([REPLACE_NULL])
- HAVE_WCHAR_T=1; AC_SUBST([HAVE_WCHAR_T])
-])
+++ /dev/null
-# stdlib_h.m4 serial 41
-dnl Copyright (C) 2007-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_STDLIB_H],
-[
- AC_REQUIRE([gl_STDLIB_H_DEFAULTS])
- gl_NEXT_HEADERS([stdlib.h])
-
- dnl Check for declarations of anything we want to poison if the
- dnl corresponding gnulib module is not in use, and which is not
- dnl guaranteed by C89.
- gl_WARN_ON_USE_PREPARE([[#include <stdlib.h>
-#if HAVE_SYS_LOADAVG_H
-# include <sys/loadavg.h>
-#endif
-#if HAVE_RANDOM_H
-# include <random.h>
-#endif
- ]], [_Exit atoll canonicalize_file_name getloadavg getsubopt grantpt
- initstate initstate_r mkdtemp mkostemp mkostemps mkstemp mkstemps
- posix_openpt ptsname ptsname_r random random_r realpath rpmatch
- setenv setstate setstate_r srandom srandom_r
- strtod strtoll strtoull unlockpt unsetenv])
-])
-
-AC_DEFUN([gl_STDLIB_MODULE_INDICATOR],
-[
- dnl Use AC_REQUIRE here, so that the default settings are expanded once only.
- AC_REQUIRE([gl_STDLIB_H_DEFAULTS])
- gl_MODULE_INDICATOR_SET_VARIABLE([$1])
- dnl Define it also as a C macro, for the benefit of the unit tests.
- gl_MODULE_INDICATOR_FOR_TESTS([$1])
-])
-
-AC_DEFUN([gl_STDLIB_H_DEFAULTS],
-[
- GNULIB__EXIT=0; AC_SUBST([GNULIB__EXIT])
- GNULIB_ATOLL=0; AC_SUBST([GNULIB_ATOLL])
- GNULIB_CALLOC_POSIX=0; AC_SUBST([GNULIB_CALLOC_POSIX])
- GNULIB_CANONICALIZE_FILE_NAME=0; AC_SUBST([GNULIB_CANONICALIZE_FILE_NAME])
- GNULIB_GETLOADAVG=0; AC_SUBST([GNULIB_GETLOADAVG])
- GNULIB_GETSUBOPT=0; AC_SUBST([GNULIB_GETSUBOPT])
- GNULIB_GRANTPT=0; AC_SUBST([GNULIB_GRANTPT])
- GNULIB_MALLOC_POSIX=0; AC_SUBST([GNULIB_MALLOC_POSIX])
- GNULIB_MBTOWC=0; AC_SUBST([GNULIB_MBTOWC])
- GNULIB_MKDTEMP=0; AC_SUBST([GNULIB_MKDTEMP])
- GNULIB_MKOSTEMP=0; AC_SUBST([GNULIB_MKOSTEMP])
- GNULIB_MKOSTEMPS=0; AC_SUBST([GNULIB_MKOSTEMPS])
- GNULIB_MKSTEMP=0; AC_SUBST([GNULIB_MKSTEMP])
- GNULIB_MKSTEMPS=0; AC_SUBST([GNULIB_MKSTEMPS])
- GNULIB_POSIX_OPENPT=0; AC_SUBST([GNULIB_POSIX_OPENPT])
- GNULIB_PTSNAME=0; AC_SUBST([GNULIB_PTSNAME])
- GNULIB_PTSNAME_R=0; AC_SUBST([GNULIB_PTSNAME_R])
- GNULIB_PUTENV=0; AC_SUBST([GNULIB_PUTENV])
- GNULIB_RANDOM=0; AC_SUBST([GNULIB_RANDOM])
- GNULIB_RANDOM_R=0; AC_SUBST([GNULIB_RANDOM_R])
- GNULIB_REALLOC_POSIX=0; AC_SUBST([GNULIB_REALLOC_POSIX])
- GNULIB_REALPATH=0; AC_SUBST([GNULIB_REALPATH])
- GNULIB_RPMATCH=0; AC_SUBST([GNULIB_RPMATCH])
- GNULIB_SETENV=0; AC_SUBST([GNULIB_SETENV])
- GNULIB_STRTOD=0; AC_SUBST([GNULIB_STRTOD])
- GNULIB_STRTOLL=0; AC_SUBST([GNULIB_STRTOLL])
- GNULIB_STRTOULL=0; AC_SUBST([GNULIB_STRTOULL])
- GNULIB_SYSTEM_POSIX=0; AC_SUBST([GNULIB_SYSTEM_POSIX])
- GNULIB_UNLOCKPT=0; AC_SUBST([GNULIB_UNLOCKPT])
- GNULIB_UNSETENV=0; AC_SUBST([GNULIB_UNSETENV])
- GNULIB_WCTOMB=0; AC_SUBST([GNULIB_WCTOMB])
- dnl Assume proper GNU behavior unless another module says otherwise.
- HAVE__EXIT=1; AC_SUBST([HAVE__EXIT])
- HAVE_ATOLL=1; AC_SUBST([HAVE_ATOLL])
- HAVE_CANONICALIZE_FILE_NAME=1; AC_SUBST([HAVE_CANONICALIZE_FILE_NAME])
- HAVE_DECL_GETLOADAVG=1; AC_SUBST([HAVE_DECL_GETLOADAVG])
- HAVE_GETSUBOPT=1; AC_SUBST([HAVE_GETSUBOPT])
- HAVE_GRANTPT=1; AC_SUBST([HAVE_GRANTPT])
- HAVE_MKDTEMP=1; AC_SUBST([HAVE_MKDTEMP])
- HAVE_MKOSTEMP=1; AC_SUBST([HAVE_MKOSTEMP])
- HAVE_MKOSTEMPS=1; AC_SUBST([HAVE_MKOSTEMPS])
- HAVE_MKSTEMP=1; AC_SUBST([HAVE_MKSTEMP])
- HAVE_MKSTEMPS=1; AC_SUBST([HAVE_MKSTEMPS])
- HAVE_POSIX_OPENPT=1; AC_SUBST([HAVE_POSIX_OPENPT])
- HAVE_PTSNAME=1; AC_SUBST([HAVE_PTSNAME])
- HAVE_PTSNAME_R=1; AC_SUBST([HAVE_PTSNAME_R])
- HAVE_RANDOM=1; AC_SUBST([HAVE_RANDOM])
- HAVE_RANDOM_H=1; AC_SUBST([HAVE_RANDOM_H])
- HAVE_RANDOM_R=1; AC_SUBST([HAVE_RANDOM_R])
- HAVE_REALPATH=1; AC_SUBST([HAVE_REALPATH])
- HAVE_RPMATCH=1; AC_SUBST([HAVE_RPMATCH])
- HAVE_SETENV=1; AC_SUBST([HAVE_SETENV])
- HAVE_DECL_SETENV=1; AC_SUBST([HAVE_DECL_SETENV])
- HAVE_STRTOD=1; AC_SUBST([HAVE_STRTOD])
- HAVE_STRTOLL=1; AC_SUBST([HAVE_STRTOLL])
- HAVE_STRTOULL=1; AC_SUBST([HAVE_STRTOULL])
- HAVE_STRUCT_RANDOM_DATA=1; AC_SUBST([HAVE_STRUCT_RANDOM_DATA])
- HAVE_SYS_LOADAVG_H=0; AC_SUBST([HAVE_SYS_LOADAVG_H])
- HAVE_UNLOCKPT=1; AC_SUBST([HAVE_UNLOCKPT])
- HAVE_DECL_UNSETENV=1; AC_SUBST([HAVE_DECL_UNSETENV])
- REPLACE_CALLOC=0; AC_SUBST([REPLACE_CALLOC])
- REPLACE_CANONICALIZE_FILE_NAME=0; AC_SUBST([REPLACE_CANONICALIZE_FILE_NAME])
- REPLACE_MALLOC=0; AC_SUBST([REPLACE_MALLOC])
- REPLACE_MBTOWC=0; AC_SUBST([REPLACE_MBTOWC])
- REPLACE_MKSTEMP=0; AC_SUBST([REPLACE_MKSTEMP])
- REPLACE_PTSNAME_R=0; AC_SUBST([REPLACE_PTSNAME_R])
- REPLACE_PUTENV=0; AC_SUBST([REPLACE_PUTENV])
- REPLACE_RANDOM_R=0; AC_SUBST([REPLACE_RANDOM_R])
- REPLACE_REALLOC=0; AC_SUBST([REPLACE_REALLOC])
- REPLACE_REALPATH=0; AC_SUBST([REPLACE_REALPATH])
- REPLACE_SETENV=0; AC_SUBST([REPLACE_SETENV])
- REPLACE_STRTOD=0; AC_SUBST([REPLACE_STRTOD])
- REPLACE_UNSETENV=0; AC_SUBST([REPLACE_UNSETENV])
- REPLACE_WCTOMB=0; AC_SUBST([REPLACE_WCTOMB])
-])
+++ /dev/null
-# strerror.m4 serial 16
-dnl Copyright (C) 2002, 2007-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_FUNC_STRERROR],
-[
- AC_REQUIRE([gl_HEADER_STRING_H_DEFAULTS])
- AC_REQUIRE([gl_HEADER_ERRNO_H])
- AC_REQUIRE([gl_FUNC_STRERROR_0])
- m4_ifdef([gl_FUNC_STRERROR_R_WORKS], [
- AC_REQUIRE([gl_FUNC_STRERROR_R_WORKS])
- ])
- if test "$ERRNO_H:$REPLACE_STRERROR_0" = :0; then
- AC_CACHE_CHECK([for working strerror function],
- [gl_cv_func_working_strerror],
- [AC_RUN_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <string.h>
- ]],
- [[if (!*strerror (-2)) return 1;]])],
- [gl_cv_func_working_strerror=yes],
- [gl_cv_func_working_strerror=no],
- [dnl Be pessimistic on cross-compiles for now.
- gl_cv_func_working_strerror="guessing no"])
- ])
- if test "$gl_cv_func_working_strerror" != yes; then
- dnl The system's strerror() fails to return a string for out-of-range
- dnl integers. Replace it.
- REPLACE_STRERROR=1
- fi
- m4_ifdef([gl_FUNC_STRERROR_R_WORKS], [
- dnl If the system's strerror_r or __xpg_strerror_r clobbers strerror's
- dnl buffer, we must replace strerror.
- case "$gl_cv_func_strerror_r_works" in
- *no) REPLACE_STRERROR=1 ;;
- esac
- ])
- else
- dnl The system's strerror() cannot know about the new errno values we add
- dnl to <errno.h>, or any fix for strerror(0). Replace it.
- REPLACE_STRERROR=1
- fi
-])
-
-dnl Detect if strerror(0) passes (that is, does not set errno, and does not
-dnl return a string that matches strerror(-1)).
-AC_DEFUN([gl_FUNC_STRERROR_0],
-[
- REPLACE_STRERROR_0=0
- AC_CACHE_CHECK([whether strerror(0) succeeds],
- [gl_cv_func_strerror_0_works],
- [AC_RUN_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <string.h>
- #include <errno.h>
- ]],
- [[int result = 0;
- char *str;
- errno = 0;
- str = strerror (0);
- if (!*str) result |= 1;
- if (errno) result |= 2;
- if (strstr (str, "nknown") || strstr (str, "ndefined"))
- result |= 4;
- return result;]])],
- [gl_cv_func_strerror_0_works=yes],
- [gl_cv_func_strerror_0_works=no],
- [dnl Be pessimistic on cross-compiles for now.
- gl_cv_func_strerror_0_works="guessing no"])
- ])
- if test "$gl_cv_func_strerror_0_works" != yes; then
- REPLACE_STRERROR_0=1
- AC_DEFINE([REPLACE_STRERROR_0], [1], [Define to 1 if strerror(0)
- does not return a message implying success.])
- fi
-])
+++ /dev/null
-# Configure a GNU-like replacement for <string.h>.
-
-# Copyright (C) 2007-2012 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 21
-
-# Written by Paul Eggert.
-
-AC_DEFUN([gl_HEADER_STRING_H],
-[
- dnl Use AC_REQUIRE here, so that the default behavior below is expanded
- dnl once only, before all statements that occur in other macros.
- AC_REQUIRE([gl_HEADER_STRING_H_BODY])
-])
-
-AC_DEFUN([gl_HEADER_STRING_H_BODY],
-[
- AC_REQUIRE([AC_C_RESTRICT])
- AC_REQUIRE([gl_HEADER_STRING_H_DEFAULTS])
- gl_NEXT_HEADERS([string.h])
-
- dnl Check for declarations of anything we want to poison if the
- dnl corresponding gnulib module is not in use, and which is not
- dnl guaranteed by C89.
- gl_WARN_ON_USE_PREPARE([[#include <string.h>
- ]],
- [ffsl ffsll memmem mempcpy memrchr rawmemchr stpcpy stpncpy strchrnul
- strdup strncat strndup strnlen strpbrk strsep strcasestr strtok_r
- strerror_r strsignal strverscmp])
-])
-
-AC_DEFUN([gl_STRING_MODULE_INDICATOR],
-[
- dnl Use AC_REQUIRE here, so that the default settings are expanded once only.
- AC_REQUIRE([gl_HEADER_STRING_H_DEFAULTS])
- gl_MODULE_INDICATOR_SET_VARIABLE([$1])
- dnl Define it also as a C macro, for the benefit of the unit tests.
- gl_MODULE_INDICATOR_FOR_TESTS([$1])
-])
-
-AC_DEFUN([gl_HEADER_STRING_H_DEFAULTS],
-[
- GNULIB_FFSL=0; AC_SUBST([GNULIB_FFSL])
- GNULIB_FFSLL=0; AC_SUBST([GNULIB_FFSLL])
- GNULIB_MEMCHR=0; AC_SUBST([GNULIB_MEMCHR])
- GNULIB_MEMMEM=0; AC_SUBST([GNULIB_MEMMEM])
- GNULIB_MEMPCPY=0; AC_SUBST([GNULIB_MEMPCPY])
- GNULIB_MEMRCHR=0; AC_SUBST([GNULIB_MEMRCHR])
- GNULIB_RAWMEMCHR=0; AC_SUBST([GNULIB_RAWMEMCHR])
- GNULIB_STPCPY=0; AC_SUBST([GNULIB_STPCPY])
- GNULIB_STPNCPY=0; AC_SUBST([GNULIB_STPNCPY])
- GNULIB_STRCHRNUL=0; AC_SUBST([GNULIB_STRCHRNUL])
- GNULIB_STRDUP=0; AC_SUBST([GNULIB_STRDUP])
- GNULIB_STRNCAT=0; AC_SUBST([GNULIB_STRNCAT])
- GNULIB_STRNDUP=0; AC_SUBST([GNULIB_STRNDUP])
- GNULIB_STRNLEN=0; AC_SUBST([GNULIB_STRNLEN])
- GNULIB_STRPBRK=0; AC_SUBST([GNULIB_STRPBRK])
- GNULIB_STRSEP=0; AC_SUBST([GNULIB_STRSEP])
- GNULIB_STRSTR=0; AC_SUBST([GNULIB_STRSTR])
- GNULIB_STRCASESTR=0; AC_SUBST([GNULIB_STRCASESTR])
- GNULIB_STRTOK_R=0; AC_SUBST([GNULIB_STRTOK_R])
- GNULIB_MBSLEN=0; AC_SUBST([GNULIB_MBSLEN])
- GNULIB_MBSNLEN=0; AC_SUBST([GNULIB_MBSNLEN])
- GNULIB_MBSCHR=0; AC_SUBST([GNULIB_MBSCHR])
- GNULIB_MBSRCHR=0; AC_SUBST([GNULIB_MBSRCHR])
- GNULIB_MBSSTR=0; AC_SUBST([GNULIB_MBSSTR])
- GNULIB_MBSCASECMP=0; AC_SUBST([GNULIB_MBSCASECMP])
- GNULIB_MBSNCASECMP=0; AC_SUBST([GNULIB_MBSNCASECMP])
- GNULIB_MBSPCASECMP=0; AC_SUBST([GNULIB_MBSPCASECMP])
- GNULIB_MBSCASESTR=0; AC_SUBST([GNULIB_MBSCASESTR])
- GNULIB_MBSCSPN=0; AC_SUBST([GNULIB_MBSCSPN])
- GNULIB_MBSPBRK=0; AC_SUBST([GNULIB_MBSPBRK])
- GNULIB_MBSSPN=0; AC_SUBST([GNULIB_MBSSPN])
- GNULIB_MBSSEP=0; AC_SUBST([GNULIB_MBSSEP])
- GNULIB_MBSTOK_R=0; AC_SUBST([GNULIB_MBSTOK_R])
- GNULIB_STRERROR=0; AC_SUBST([GNULIB_STRERROR])
- GNULIB_STRERROR_R=0; AC_SUBST([GNULIB_STRERROR_R])
- GNULIB_STRSIGNAL=0; AC_SUBST([GNULIB_STRSIGNAL])
- GNULIB_STRVERSCMP=0; AC_SUBST([GNULIB_STRVERSCMP])
- HAVE_MBSLEN=0; AC_SUBST([HAVE_MBSLEN])
- dnl Assume proper GNU behavior unless another module says otherwise.
- HAVE_FFSL=1; AC_SUBST([HAVE_FFSL])
- HAVE_FFSLL=1; AC_SUBST([HAVE_FFSLL])
- HAVE_MEMCHR=1; AC_SUBST([HAVE_MEMCHR])
- HAVE_DECL_MEMMEM=1; AC_SUBST([HAVE_DECL_MEMMEM])
- HAVE_MEMPCPY=1; AC_SUBST([HAVE_MEMPCPY])
- HAVE_DECL_MEMRCHR=1; AC_SUBST([HAVE_DECL_MEMRCHR])
- HAVE_RAWMEMCHR=1; AC_SUBST([HAVE_RAWMEMCHR])
- HAVE_STPCPY=1; AC_SUBST([HAVE_STPCPY])
- HAVE_STPNCPY=1; AC_SUBST([HAVE_STPNCPY])
- HAVE_STRCHRNUL=1; AC_SUBST([HAVE_STRCHRNUL])
- HAVE_DECL_STRDUP=1; AC_SUBST([HAVE_DECL_STRDUP])
- HAVE_DECL_STRNDUP=1; AC_SUBST([HAVE_DECL_STRNDUP])
- HAVE_DECL_STRNLEN=1; AC_SUBST([HAVE_DECL_STRNLEN])
- HAVE_STRPBRK=1; AC_SUBST([HAVE_STRPBRK])
- HAVE_STRSEP=1; AC_SUBST([HAVE_STRSEP])
- HAVE_STRCASESTR=1; AC_SUBST([HAVE_STRCASESTR])
- HAVE_DECL_STRTOK_R=1; AC_SUBST([HAVE_DECL_STRTOK_R])
- HAVE_DECL_STRERROR_R=1; AC_SUBST([HAVE_DECL_STRERROR_R])
- HAVE_DECL_STRSIGNAL=1; AC_SUBST([HAVE_DECL_STRSIGNAL])
- HAVE_STRVERSCMP=1; AC_SUBST([HAVE_STRVERSCMP])
- REPLACE_MEMCHR=0; AC_SUBST([REPLACE_MEMCHR])
- REPLACE_MEMMEM=0; AC_SUBST([REPLACE_MEMMEM])
- REPLACE_STPNCPY=0; AC_SUBST([REPLACE_STPNCPY])
- REPLACE_STRDUP=0; AC_SUBST([REPLACE_STRDUP])
- REPLACE_STRSTR=0; AC_SUBST([REPLACE_STRSTR])
- REPLACE_STRCASESTR=0; AC_SUBST([REPLACE_STRCASESTR])
- REPLACE_STRCHRNUL=0; AC_SUBST([REPLACE_STRCHRNUL])
- REPLACE_STRERROR=0; AC_SUBST([REPLACE_STRERROR])
- REPLACE_STRERROR_R=0; AC_SUBST([REPLACE_STRERROR_R])
- REPLACE_STRNCAT=0; AC_SUBST([REPLACE_STRNCAT])
- REPLACE_STRNDUP=0; AC_SUBST([REPLACE_STRNDUP])
- REPLACE_STRNLEN=0; AC_SUBST([REPLACE_STRNLEN])
- REPLACE_STRSIGNAL=0; AC_SUBST([REPLACE_STRSIGNAL])
- REPLACE_STRTOK_R=0; AC_SUBST([REPLACE_STRTOK_R])
- UNDEFINE_STRTOK_R=0; AC_SUBST([UNDEFINE_STRTOK_R])
-])
+++ /dev/null
-# sys_socket_h.m4 serial 22
-dnl Copyright (C) 2005-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Simon Josefsson.
-
-AC_DEFUN([gl_HEADER_SYS_SOCKET],
-[
- AC_REQUIRE([gl_SYS_SOCKET_H_DEFAULTS])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_C_INLINE])
-
- dnl On OSF/1, the functions recv(), send(), recvfrom(), sendto() have
- dnl old-style declarations (with return type 'int' instead of 'ssize_t')
- dnl unless _POSIX_PII_SOCKET is defined.
- case "$host_os" in
- osf*)
- AC_DEFINE([_POSIX_PII_SOCKET], [1],
- [Define to 1 in order to get the POSIX compatible declarations
- of socket functions.])
- ;;
- esac
-
- AC_CACHE_CHECK([whether <sys/socket.h> is self-contained],
- [gl_cv_header_sys_socket_h_selfcontained],
- [
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/socket.h>]], [[]])],
- [gl_cv_header_sys_socket_h_selfcontained=yes],
- [gl_cv_header_sys_socket_h_selfcontained=no])
- ])
- if test $gl_cv_header_sys_socket_h_selfcontained = yes; then
- dnl If the shutdown function exists, <sys/socket.h> should define
- dnl SHUT_RD, SHUT_WR, SHUT_RDWR.
- AC_CHECK_FUNCS([shutdown])
- if test $ac_cv_func_shutdown = yes; then
- AC_CACHE_CHECK([whether <sys/socket.h> defines the SHUT_* macros],
- [gl_cv_header_sys_socket_h_shut],
- [
- AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM([[#include <sys/socket.h>]],
- [[int a[] = { SHUT_RD, SHUT_WR, SHUT_RDWR };]])],
- [gl_cv_header_sys_socket_h_shut=yes],
- [gl_cv_header_sys_socket_h_shut=no])
- ])
- if test $gl_cv_header_sys_socket_h_shut = no; then
- SYS_SOCKET_H='sys/socket.h'
- fi
- fi
- fi
- # We need to check for ws2tcpip.h now.
- gl_PREREQ_SYS_H_SOCKET
- AC_CHECK_TYPES([struct sockaddr_storage, sa_family_t],,,[
- /* sys/types.h is not needed according to POSIX, but the
- sys/socket.h in i386-unknown-freebsd4.10 and
- powerpc-apple-darwin5.5 required it. */
-#include <sys/types.h>
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#ifdef HAVE_WS2TCPIP_H
-#include <ws2tcpip.h>
-#endif
-])
- if test $ac_cv_type_struct_sockaddr_storage = no; then
- HAVE_STRUCT_SOCKADDR_STORAGE=0
- fi
- if test $ac_cv_type_sa_family_t = no; then
- HAVE_SA_FAMILY_T=0
- fi
- if test $ac_cv_type_struct_sockaddr_storage != no; then
- AC_CHECK_MEMBERS([struct sockaddr_storage.ss_family],
- [],
- [HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY=0],
- [#include <sys/types.h>
- #ifdef HAVE_SYS_SOCKET_H
- #include <sys/socket.h>
- #endif
- #ifdef HAVE_WS2TCPIP_H
- #include <ws2tcpip.h>
- #endif
- ])
- fi
- if test $HAVE_STRUCT_SOCKADDR_STORAGE = 0 || test $HAVE_SA_FAMILY_T = 0 \
- || test $HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY = 0; then
- SYS_SOCKET_H='sys/socket.h'
- fi
- gl_PREREQ_SYS_H_WINSOCK2
-
- dnl Check for declarations of anything we want to poison if the
- dnl corresponding gnulib module is not in use.
- gl_WARN_ON_USE_PREPARE([[
-/* Some systems require prerequisite headers. */
-#include <sys/types.h>
-#include <sys/socket.h>
- ]], [socket connect accept bind getpeername getsockname getsockopt
- listen recv send recvfrom sendto setsockopt shutdown accept4])
-])
-
-AC_DEFUN([gl_PREREQ_SYS_H_SOCKET],
-[
- dnl Check prerequisites of the <sys/socket.h> replacement.
- AC_REQUIRE([gl_CHECK_SOCKET_HEADERS])
- gl_CHECK_NEXT_HEADERS([sys/socket.h])
- if test $ac_cv_header_sys_socket_h = yes; then
- HAVE_SYS_SOCKET_H=1
- HAVE_WS2TCPIP_H=0
- else
- HAVE_SYS_SOCKET_H=0
- if test $ac_cv_header_ws2tcpip_h = yes; then
- HAVE_WS2TCPIP_H=1
- else
- HAVE_WS2TCPIP_H=0
- fi
- fi
- AC_SUBST([HAVE_SYS_SOCKET_H])
- AC_SUBST([HAVE_WS2TCPIP_H])
-])
-
-# Common prerequisites of the <sys/socket.h> replacement and of the
-# <sys/select.h> replacement.
-# Sets and substitutes HAVE_WINSOCK2_H.
-AC_DEFUN([gl_PREREQ_SYS_H_WINSOCK2],
-[
- m4_ifdef([gl_UNISTD_H_DEFAULTS], [AC_REQUIRE([gl_UNISTD_H_DEFAULTS])])
- m4_ifdef([gl_SYS_IOCTL_H_DEFAULTS], [AC_REQUIRE([gl_SYS_IOCTL_H_DEFAULTS])])
- AC_CHECK_HEADERS_ONCE([sys/socket.h])
- if test $ac_cv_header_sys_socket_h != yes; then
- dnl We cannot use AC_CHECK_HEADERS_ONCE here, because that would make
- dnl the check for those headers unconditional; yet cygwin reports
- dnl that the headers are present but cannot be compiled (since on
- dnl cygwin, all socket information should come from sys/socket.h).
- AC_CHECK_HEADERS([winsock2.h])
- fi
- if test "$ac_cv_header_winsock2_h" = yes; then
- HAVE_WINSOCK2_H=1
- UNISTD_H_HAVE_WINSOCK2_H=1
- SYS_IOCTL_H_HAVE_WINSOCK2_H=1
- else
- HAVE_WINSOCK2_H=0
- fi
- AC_SUBST([HAVE_WINSOCK2_H])
-])
-
-AC_DEFUN([gl_SYS_SOCKET_MODULE_INDICATOR],
-[
- dnl Use AC_REQUIRE here, so that the default settings are expanded once only.
- AC_REQUIRE([gl_SYS_SOCKET_H_DEFAULTS])
- gl_MODULE_INDICATOR_SET_VARIABLE([$1])
- dnl Define it also as a C macro, for the benefit of the unit tests.
- gl_MODULE_INDICATOR_FOR_TESTS([$1])
-])
-
-AC_DEFUN([gl_SYS_SOCKET_H_DEFAULTS],
-[
- GNULIB_SOCKET=0; AC_SUBST([GNULIB_SOCKET])
- GNULIB_CONNECT=0; AC_SUBST([GNULIB_CONNECT])
- GNULIB_ACCEPT=0; AC_SUBST([GNULIB_ACCEPT])
- GNULIB_BIND=0; AC_SUBST([GNULIB_BIND])
- GNULIB_GETPEERNAME=0; AC_SUBST([GNULIB_GETPEERNAME])
- GNULIB_GETSOCKNAME=0; AC_SUBST([GNULIB_GETSOCKNAME])
- GNULIB_GETSOCKOPT=0; AC_SUBST([GNULIB_GETSOCKOPT])
- GNULIB_LISTEN=0; AC_SUBST([GNULIB_LISTEN])
- GNULIB_RECV=0; AC_SUBST([GNULIB_RECV])
- GNULIB_SEND=0; AC_SUBST([GNULIB_SEND])
- GNULIB_RECVFROM=0; AC_SUBST([GNULIB_RECVFROM])
- GNULIB_SENDTO=0; AC_SUBST([GNULIB_SENDTO])
- GNULIB_SETSOCKOPT=0; AC_SUBST([GNULIB_SETSOCKOPT])
- GNULIB_SHUTDOWN=0; AC_SUBST([GNULIB_SHUTDOWN])
- GNULIB_ACCEPT4=0; AC_SUBST([GNULIB_ACCEPT4])
- HAVE_STRUCT_SOCKADDR_STORAGE=1; AC_SUBST([HAVE_STRUCT_SOCKADDR_STORAGE])
- HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY=1;
- AC_SUBST([HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY])
- HAVE_SA_FAMILY_T=1; AC_SUBST([HAVE_SA_FAMILY_T])
- HAVE_ACCEPT4=1; AC_SUBST([HAVE_ACCEPT4])
-])
+++ /dev/null
-# unistd_h.m4 serial 63
-dnl Copyright (C) 2006-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Written by Simon Josefsson, Bruno Haible.
-
-AC_DEFUN([gl_UNISTD_H],
-[
- dnl Use AC_REQUIRE here, so that the default behavior below is expanded
- dnl once only, before all statements that occur in other macros.
- AC_REQUIRE([gl_UNISTD_H_DEFAULTS])
- AC_REQUIRE([AC_C_INLINE])
-
- gl_CHECK_NEXT_HEADERS([unistd.h])
- if test $ac_cv_header_unistd_h = yes; then
- HAVE_UNISTD_H=1
- else
- HAVE_UNISTD_H=0
- fi
- AC_SUBST([HAVE_UNISTD_H])
-
- dnl Ensure the type pid_t gets defined.
- AC_REQUIRE([AC_TYPE_PID_T])
-
- dnl Check for declarations of anything we want to poison if the
- dnl corresponding gnulib module is not in use.
- gl_WARN_ON_USE_PREPARE([[
-#if HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-/* Some systems declare various items in the wrong headers. */
-#if !(defined __GLIBC__ && !defined __UCLIBC__)
-# include <fcntl.h>
-# include <stdio.h>
-# include <stdlib.h>
-# if (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
-# include <io.h>
-# endif
-#endif
- ]], [chdir chown dup dup2 dup3 environ euidaccess faccessat fchdir fchownat
- fdatasync fsync ftruncate getcwd getdomainname getdtablesize getgroups
- gethostname getlogin getlogin_r getpagesize
- getusershell setusershell endusershell
- group_member isatty lchown link linkat lseek pipe pipe2 pread pwrite
- readlink readlinkat rmdir sethostname sleep symlink symlinkat ttyname_r
- unlink unlinkat usleep])
-])
-
-AC_DEFUN([gl_UNISTD_MODULE_INDICATOR],
-[
- dnl Use AC_REQUIRE here, so that the default settings are expanded once only.
- AC_REQUIRE([gl_UNISTD_H_DEFAULTS])
- gl_MODULE_INDICATOR_SET_VARIABLE([$1])
- dnl Define it also as a C macro, for the benefit of the unit tests.
- gl_MODULE_INDICATOR_FOR_TESTS([$1])
-])
-
-AC_DEFUN([gl_UNISTD_H_DEFAULTS],
-[
- GNULIB_CHDIR=0; AC_SUBST([GNULIB_CHDIR])
- GNULIB_CHOWN=0; AC_SUBST([GNULIB_CHOWN])
- GNULIB_CLOSE=0; AC_SUBST([GNULIB_CLOSE])
- GNULIB_DUP=0; AC_SUBST([GNULIB_DUP])
- GNULIB_DUP2=0; AC_SUBST([GNULIB_DUP2])
- GNULIB_DUP3=0; AC_SUBST([GNULIB_DUP3])
- GNULIB_ENVIRON=0; AC_SUBST([GNULIB_ENVIRON])
- GNULIB_EUIDACCESS=0; AC_SUBST([GNULIB_EUIDACCESS])
- GNULIB_FACCESSAT=0; AC_SUBST([GNULIB_FACCESSAT])
- GNULIB_FCHDIR=0; AC_SUBST([GNULIB_FCHDIR])
- GNULIB_FCHOWNAT=0; AC_SUBST([GNULIB_FCHOWNAT])
- GNULIB_FDATASYNC=0; AC_SUBST([GNULIB_FDATASYNC])
- GNULIB_FSYNC=0; AC_SUBST([GNULIB_FSYNC])
- GNULIB_FTRUNCATE=0; AC_SUBST([GNULIB_FTRUNCATE])
- GNULIB_GETCWD=0; AC_SUBST([GNULIB_GETCWD])
- GNULIB_GETDOMAINNAME=0; AC_SUBST([GNULIB_GETDOMAINNAME])
- GNULIB_GETDTABLESIZE=0; AC_SUBST([GNULIB_GETDTABLESIZE])
- GNULIB_GETGROUPS=0; AC_SUBST([GNULIB_GETGROUPS])
- GNULIB_GETHOSTNAME=0; AC_SUBST([GNULIB_GETHOSTNAME])
- GNULIB_GETLOGIN=0; AC_SUBST([GNULIB_GETLOGIN])
- GNULIB_GETLOGIN_R=0; AC_SUBST([GNULIB_GETLOGIN_R])
- GNULIB_GETPAGESIZE=0; AC_SUBST([GNULIB_GETPAGESIZE])
- GNULIB_GETUSERSHELL=0; AC_SUBST([GNULIB_GETUSERSHELL])
- GNULIB_GROUP_MEMBER=0; AC_SUBST([GNULIB_GROUP_MEMBER])
- GNULIB_ISATTY=0; AC_SUBST([GNULIB_ISATTY])
- GNULIB_LCHOWN=0; AC_SUBST([GNULIB_LCHOWN])
- GNULIB_LINK=0; AC_SUBST([GNULIB_LINK])
- GNULIB_LINKAT=0; AC_SUBST([GNULIB_LINKAT])
- GNULIB_LSEEK=0; AC_SUBST([GNULIB_LSEEK])
- GNULIB_PIPE=0; AC_SUBST([GNULIB_PIPE])
- GNULIB_PIPE2=0; AC_SUBST([GNULIB_PIPE2])
- GNULIB_PREAD=0; AC_SUBST([GNULIB_PREAD])
- GNULIB_PWRITE=0; AC_SUBST([GNULIB_PWRITE])
- GNULIB_READ=0; AC_SUBST([GNULIB_READ])
- GNULIB_READLINK=0; AC_SUBST([GNULIB_READLINK])
- GNULIB_READLINKAT=0; AC_SUBST([GNULIB_READLINKAT])
- GNULIB_RMDIR=0; AC_SUBST([GNULIB_RMDIR])
- GNULIB_SETHOSTNAME=0; AC_SUBST([GNULIB_SETHOSTNAME])
- GNULIB_SLEEP=0; AC_SUBST([GNULIB_SLEEP])
- GNULIB_SYMLINK=0; AC_SUBST([GNULIB_SYMLINK])
- GNULIB_SYMLINKAT=0; AC_SUBST([GNULIB_SYMLINKAT])
- GNULIB_TTYNAME_R=0; AC_SUBST([GNULIB_TTYNAME_R])
- GNULIB_UNISTD_H_NONBLOCKING=0; AC_SUBST([GNULIB_UNISTD_H_NONBLOCKING])
- GNULIB_UNISTD_H_SIGPIPE=0; AC_SUBST([GNULIB_UNISTD_H_SIGPIPE])
- GNULIB_UNLINK=0; AC_SUBST([GNULIB_UNLINK])
- GNULIB_UNLINKAT=0; AC_SUBST([GNULIB_UNLINKAT])
- GNULIB_USLEEP=0; AC_SUBST([GNULIB_USLEEP])
- GNULIB_WRITE=0; AC_SUBST([GNULIB_WRITE])
- dnl Assume proper GNU behavior unless another module says otherwise.
- HAVE_CHOWN=1; AC_SUBST([HAVE_CHOWN])
- HAVE_DUP2=1; AC_SUBST([HAVE_DUP2])
- HAVE_DUP3=1; AC_SUBST([HAVE_DUP3])
- HAVE_EUIDACCESS=1; AC_SUBST([HAVE_EUIDACCESS])
- HAVE_FACCESSAT=1; AC_SUBST([HAVE_FACCESSAT])
- HAVE_FCHDIR=1; AC_SUBST([HAVE_FCHDIR])
- HAVE_FCHOWNAT=1; AC_SUBST([HAVE_FCHOWNAT])
- HAVE_FDATASYNC=1; AC_SUBST([HAVE_FDATASYNC])
- HAVE_FSYNC=1; AC_SUBST([HAVE_FSYNC])
- HAVE_FTRUNCATE=1; AC_SUBST([HAVE_FTRUNCATE])
- HAVE_GETDTABLESIZE=1; AC_SUBST([HAVE_GETDTABLESIZE])
- HAVE_GETGROUPS=1; AC_SUBST([HAVE_GETGROUPS])
- HAVE_GETHOSTNAME=1; AC_SUBST([HAVE_GETHOSTNAME])
- HAVE_GETLOGIN=1; AC_SUBST([HAVE_GETLOGIN])
- HAVE_GETPAGESIZE=1; AC_SUBST([HAVE_GETPAGESIZE])
- HAVE_GROUP_MEMBER=1; AC_SUBST([HAVE_GROUP_MEMBER])
- HAVE_LCHOWN=1; AC_SUBST([HAVE_LCHOWN])
- HAVE_LINK=1; AC_SUBST([HAVE_LINK])
- HAVE_LINKAT=1; AC_SUBST([HAVE_LINKAT])
- HAVE_PIPE=1; AC_SUBST([HAVE_PIPE])
- HAVE_PIPE2=1; AC_SUBST([HAVE_PIPE2])
- HAVE_PREAD=1; AC_SUBST([HAVE_PREAD])
- HAVE_PWRITE=1; AC_SUBST([HAVE_PWRITE])
- HAVE_READLINK=1; AC_SUBST([HAVE_READLINK])
- HAVE_READLINKAT=1; AC_SUBST([HAVE_READLINKAT])
- HAVE_SETHOSTNAME=1; AC_SUBST([HAVE_SETHOSTNAME])
- HAVE_SLEEP=1; AC_SUBST([HAVE_SLEEP])
- HAVE_SYMLINK=1; AC_SUBST([HAVE_SYMLINK])
- HAVE_SYMLINKAT=1; AC_SUBST([HAVE_SYMLINKAT])
- HAVE_UNLINKAT=1; AC_SUBST([HAVE_UNLINKAT])
- HAVE_USLEEP=1; AC_SUBST([HAVE_USLEEP])
- HAVE_DECL_ENVIRON=1; AC_SUBST([HAVE_DECL_ENVIRON])
- HAVE_DECL_FCHDIR=1; AC_SUBST([HAVE_DECL_FCHDIR])
- HAVE_DECL_FDATASYNC=1; AC_SUBST([HAVE_DECL_FDATASYNC])
- HAVE_DECL_GETDOMAINNAME=1; AC_SUBST([HAVE_DECL_GETDOMAINNAME])
- HAVE_DECL_GETLOGIN_R=1; AC_SUBST([HAVE_DECL_GETLOGIN_R])
- HAVE_DECL_GETPAGESIZE=1; AC_SUBST([HAVE_DECL_GETPAGESIZE])
- HAVE_DECL_GETUSERSHELL=1; AC_SUBST([HAVE_DECL_GETUSERSHELL])
- HAVE_DECL_SETHOSTNAME=1; AC_SUBST([HAVE_DECL_SETHOSTNAME])
- HAVE_DECL_TTYNAME_R=1; AC_SUBST([HAVE_DECL_TTYNAME_R])
- HAVE_OS_H=0; AC_SUBST([HAVE_OS_H])
- HAVE_SYS_PARAM_H=0; AC_SUBST([HAVE_SYS_PARAM_H])
- REPLACE_CHOWN=0; AC_SUBST([REPLACE_CHOWN])
- REPLACE_CLOSE=0; AC_SUBST([REPLACE_CLOSE])
- REPLACE_DUP=0; AC_SUBST([REPLACE_DUP])
- REPLACE_DUP2=0; AC_SUBST([REPLACE_DUP2])
- REPLACE_FCHOWNAT=0; AC_SUBST([REPLACE_FCHOWNAT])
- REPLACE_GETCWD=0; AC_SUBST([REPLACE_GETCWD])
- REPLACE_GETDOMAINNAME=0; AC_SUBST([REPLACE_GETDOMAINNAME])
- REPLACE_GETLOGIN_R=0; AC_SUBST([REPLACE_GETLOGIN_R])
- REPLACE_GETGROUPS=0; AC_SUBST([REPLACE_GETGROUPS])
- REPLACE_GETPAGESIZE=0; AC_SUBST([REPLACE_GETPAGESIZE])
- REPLACE_ISATTY=0; AC_SUBST([REPLACE_ISATTY])
- REPLACE_LCHOWN=0; AC_SUBST([REPLACE_LCHOWN])
- REPLACE_LINK=0; AC_SUBST([REPLACE_LINK])
- REPLACE_LINKAT=0; AC_SUBST([REPLACE_LINKAT])
- REPLACE_LSEEK=0; AC_SUBST([REPLACE_LSEEK])
- REPLACE_PREAD=0; AC_SUBST([REPLACE_PREAD])
- REPLACE_PWRITE=0; AC_SUBST([REPLACE_PWRITE])
- REPLACE_READ=0; AC_SUBST([REPLACE_READ])
- REPLACE_READLINK=0; AC_SUBST([REPLACE_READLINK])
- REPLACE_RMDIR=0; AC_SUBST([REPLACE_RMDIR])
- REPLACE_SLEEP=0; AC_SUBST([REPLACE_SLEEP])
- REPLACE_SYMLINK=0; AC_SUBST([REPLACE_SYMLINK])
- REPLACE_TTYNAME_R=0; AC_SUBST([REPLACE_TTYNAME_R])
- REPLACE_UNLINK=0; AC_SUBST([REPLACE_UNLINK])
- REPLACE_UNLINKAT=0; AC_SUBST([REPLACE_UNLINKAT])
- REPLACE_USLEEP=0; AC_SUBST([REPLACE_USLEEP])
- REPLACE_WRITE=0; AC_SUBST([REPLACE_WRITE])
- UNISTD_H_HAVE_WINSOCK2_H=0; AC_SUBST([UNISTD_H_HAVE_WINSOCK2_H])
- UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS=0;
- AC_SUBST([UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS])
-])
+++ /dev/null
-# warn-on-use.m4 serial 5
-dnl Copyright (C) 2010-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-# gl_WARN_ON_USE_PREPARE(INCLUDES, NAMES)
-# ---------------------------------------
-# For each whitespace-separated element in the list of NAMES, define
-# HAVE_RAW_DECL_name if the function has a declaration among INCLUDES
-# even after being undefined as a macro.
-#
-# See warn-on-use.h for some hints on how to poison function names, as
-# well as ideas on poisoning global variables and macros. NAMES may
-# include global variables, but remember that only functions work with
-# _GL_WARN_ON_USE. Typically, INCLUDES only needs to list a single
-# header, but if the replacement header pulls in other headers because
-# some systems declare functions in the wrong header, then INCLUDES
-# should do likewise.
-#
-# It is generally safe to assume declarations for functions declared
-# in the intersection of C89 and C11 (such as printf) without
-# needing gl_WARN_ON_USE_PREPARE.
-AC_DEFUN([gl_WARN_ON_USE_PREPARE],
-[
- m4_foreach_w([gl_decl], [$2],
- [AH_TEMPLATE([HAVE_RAW_DECL_]AS_TR_CPP(m4_defn([gl_decl])),
- [Define to 1 if ]m4_defn([gl_decl])[ is declared even after
- undefining macros.])])dnl
-dnl FIXME: gl_Symbol must be used unquoted until we can assume
-dnl autoconf 2.64 or newer.
- for gl_func in m4_flatten([$2]); do
- AS_VAR_PUSHDEF([gl_Symbol], [gl_cv_have_raw_decl_$gl_func])dnl
- AC_CACHE_CHECK([whether $gl_func is declared without a macro],
- gl_Symbol,
- [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([$1],
-[@%:@undef $gl_func
- (void) $gl_func;])],
- [AS_VAR_SET(gl_Symbol, [yes])], [AS_VAR_SET(gl_Symbol, [no])])])
- AS_VAR_IF(gl_Symbol, [yes],
- [AC_DEFINE_UNQUOTED(AS_TR_CPP([HAVE_RAW_DECL_$gl_func]), [1])
- dnl shortcut - if the raw declaration exists, then set a cache
- dnl variable to allow skipping any later AC_CHECK_DECL efforts
- eval ac_cv_have_decl_$gl_func=yes])
- AS_VAR_POPDEF([gl_Symbol])dnl
- done
-])
+++ /dev/null
-dnl A placeholder for ISO C99 <wchar.h>, for platforms that have issues.
-
-dnl Copyright (C) 2007-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Written by Eric Blake.
-
-# wchar_h.m4 serial 39
-
-AC_DEFUN([gl_WCHAR_H],
-[
- AC_REQUIRE([gl_WCHAR_H_DEFAULTS])
- AC_REQUIRE([gl_WCHAR_H_INLINE_OK])
- dnl Prepare for creating substitute <wchar.h>.
- dnl Check for <wchar.h> (missing in Linux uClibc when built without wide
- dnl character support).
- dnl <wchar.h> is always overridden, because of GNULIB_POSIXCHECK.
- gl_CHECK_NEXT_HEADERS([wchar.h])
- if test $ac_cv_header_wchar_h = yes; then
- HAVE_WCHAR_H=1
- else
- HAVE_WCHAR_H=0
- fi
- AC_SUBST([HAVE_WCHAR_H])
-
- AC_REQUIRE([gl_FEATURES_H])
-
- AC_REQUIRE([gt_TYPE_WINT_T])
- if test $gt_cv_c_wint_t = yes; then
- HAVE_WINT_T=1
- else
- HAVE_WINT_T=0
- fi
- AC_SUBST([HAVE_WINT_T])
-
- dnl Check for declarations of anything we want to poison if the
- dnl corresponding gnulib module is not in use.
- gl_WARN_ON_USE_PREPARE([[
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#if !(defined __GLIBC__ && !defined __UCLIBC__)
-# include <stddef.h>
-# include <stdio.h>
-# include <time.h>
-#endif
-#include <wchar.h>
- ]],
- [btowc wctob mbsinit mbrtowc mbrlen mbsrtowcs mbsnrtowcs wcrtomb
- wcsrtombs wcsnrtombs wcwidth wmemchr wmemcmp wmemcpy wmemmove wmemset
- wcslen wcsnlen wcscpy wcpcpy wcsncpy wcpncpy wcscat wcsncat wcscmp
- wcsncmp wcscasecmp wcsncasecmp wcscoll wcsxfrm wcsdup wcschr wcsrchr
- wcscspn wcsspn wcspbrk wcsstr wcstok wcswidth
- ])
-])
-
-dnl Check whether <wchar.h> is usable at all.
-AC_DEFUN([gl_WCHAR_H_INLINE_OK],
-[
- dnl Test whether <wchar.h> suffers due to the transition from '__inline' to
- dnl 'gnu_inline'. See <http://sourceware.org/bugzilla/show_bug.cgi?id=4022>
- dnl and <http://gcc.gnu.org/bugzilla/show_bug.cgi?id=42440>. In summary,
- dnl glibc version 2.5 or older, together with gcc version 4.3 or newer and
- dnl the option -std=c99 or -std=gnu99, leads to a broken <wchar.h>.
- AC_CACHE_CHECK([whether <wchar.h> uses 'inline' correctly],
- [gl_cv_header_wchar_h_correct_inline],
- [gl_cv_header_wchar_h_correct_inline=yes
- AC_LANG_CONFTEST([
- AC_LANG_SOURCE([[#define wcstod renamed_wcstod
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-extern int zero (void);
-int main () { return zero(); }
-]])])
- if AC_TRY_EVAL([ac_compile]); then
- mv conftest.$ac_objext conftest1.$ac_objext
- AC_LANG_CONFTEST([
- AC_LANG_SOURCE([[#define wcstod renamed_wcstod
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
-int zero (void) { return 0; }
-]])])
- if AC_TRY_EVAL([ac_compile]); then
- mv conftest.$ac_objext conftest2.$ac_objext
- if $CC -o conftest$ac_exeext $CFLAGS $LDFLAGS conftest1.$ac_objext conftest2.$ac_objext $LIBS >&AS_MESSAGE_LOG_FD 2>&1; then
- :
- else
- gl_cv_header_wchar_h_correct_inline=no
- fi
- fi
- fi
- rm -f conftest1.$ac_objext conftest2.$ac_objext conftest$ac_exeext
- ])
- if test $gl_cv_header_wchar_h_correct_inline = no; then
- AC_MSG_ERROR([<wchar.h> cannot be used with this compiler ($CC $CFLAGS $CPPFLAGS).
-This is a known interoperability problem of glibc <= 2.5 with gcc >= 4.3 in
-C99 mode. You have four options:
- - Add the flag -fgnu89-inline to CC and reconfigure, or
- - Fix your include files, using parts of
- <http://sourceware.org/git/?p=glibc.git;a=commitdiff;h=b037a293a48718af30d706c2e18c929d0e69a621>, or
- - Use a gcc version older than 4.3, or
- - Don't use the flags -std=c99 or -std=gnu99.
-Configuration aborted.])
- fi
-])
-
-AC_DEFUN([gl_WCHAR_MODULE_INDICATOR],
-[
- dnl Use AC_REQUIRE here, so that the default settings are expanded once only.
- AC_REQUIRE([gl_WCHAR_H_DEFAULTS])
- gl_MODULE_INDICATOR_SET_VARIABLE([$1])
- dnl Define it also as a C macro, for the benefit of the unit tests.
- gl_MODULE_INDICATOR_FOR_TESTS([$1])
-])
-
-AC_DEFUN([gl_WCHAR_H_DEFAULTS],
-[
- GNULIB_BTOWC=0; AC_SUBST([GNULIB_BTOWC])
- GNULIB_WCTOB=0; AC_SUBST([GNULIB_WCTOB])
- GNULIB_MBSINIT=0; AC_SUBST([GNULIB_MBSINIT])
- GNULIB_MBRTOWC=0; AC_SUBST([GNULIB_MBRTOWC])
- GNULIB_MBRLEN=0; AC_SUBST([GNULIB_MBRLEN])
- GNULIB_MBSRTOWCS=0; AC_SUBST([GNULIB_MBSRTOWCS])
- GNULIB_MBSNRTOWCS=0; AC_SUBST([GNULIB_MBSNRTOWCS])
- GNULIB_WCRTOMB=0; AC_SUBST([GNULIB_WCRTOMB])
- GNULIB_WCSRTOMBS=0; AC_SUBST([GNULIB_WCSRTOMBS])
- GNULIB_WCSNRTOMBS=0; AC_SUBST([GNULIB_WCSNRTOMBS])
- GNULIB_WCWIDTH=0; AC_SUBST([GNULIB_WCWIDTH])
- GNULIB_WMEMCHR=0; AC_SUBST([GNULIB_WMEMCHR])
- GNULIB_WMEMCMP=0; AC_SUBST([GNULIB_WMEMCMP])
- GNULIB_WMEMCPY=0; AC_SUBST([GNULIB_WMEMCPY])
- GNULIB_WMEMMOVE=0; AC_SUBST([GNULIB_WMEMMOVE])
- GNULIB_WMEMSET=0; AC_SUBST([GNULIB_WMEMSET])
- GNULIB_WCSLEN=0; AC_SUBST([GNULIB_WCSLEN])
- GNULIB_WCSNLEN=0; AC_SUBST([GNULIB_WCSNLEN])
- GNULIB_WCSCPY=0; AC_SUBST([GNULIB_WCSCPY])
- GNULIB_WCPCPY=0; AC_SUBST([GNULIB_WCPCPY])
- GNULIB_WCSNCPY=0; AC_SUBST([GNULIB_WCSNCPY])
- GNULIB_WCPNCPY=0; AC_SUBST([GNULIB_WCPNCPY])
- GNULIB_WCSCAT=0; AC_SUBST([GNULIB_WCSCAT])
- GNULIB_WCSNCAT=0; AC_SUBST([GNULIB_WCSNCAT])
- GNULIB_WCSCMP=0; AC_SUBST([GNULIB_WCSCMP])
- GNULIB_WCSNCMP=0; AC_SUBST([GNULIB_WCSNCMP])
- GNULIB_WCSCASECMP=0; AC_SUBST([GNULIB_WCSCASECMP])
- GNULIB_WCSNCASECMP=0; AC_SUBST([GNULIB_WCSNCASECMP])
- GNULIB_WCSCOLL=0; AC_SUBST([GNULIB_WCSCOLL])
- GNULIB_WCSXFRM=0; AC_SUBST([GNULIB_WCSXFRM])
- GNULIB_WCSDUP=0; AC_SUBST([GNULIB_WCSDUP])
- GNULIB_WCSCHR=0; AC_SUBST([GNULIB_WCSCHR])
- GNULIB_WCSRCHR=0; AC_SUBST([GNULIB_WCSRCHR])
- GNULIB_WCSCSPN=0; AC_SUBST([GNULIB_WCSCSPN])
- GNULIB_WCSSPN=0; AC_SUBST([GNULIB_WCSSPN])
- GNULIB_WCSPBRK=0; AC_SUBST([GNULIB_WCSPBRK])
- GNULIB_WCSSTR=0; AC_SUBST([GNULIB_WCSSTR])
- GNULIB_WCSTOK=0; AC_SUBST([GNULIB_WCSTOK])
- GNULIB_WCSWIDTH=0; AC_SUBST([GNULIB_WCSWIDTH])
- dnl Assume proper GNU behavior unless another module says otherwise.
- HAVE_BTOWC=1; AC_SUBST([HAVE_BTOWC])
- HAVE_MBSINIT=1; AC_SUBST([HAVE_MBSINIT])
- HAVE_MBRTOWC=1; AC_SUBST([HAVE_MBRTOWC])
- HAVE_MBRLEN=1; AC_SUBST([HAVE_MBRLEN])
- HAVE_MBSRTOWCS=1; AC_SUBST([HAVE_MBSRTOWCS])
- HAVE_MBSNRTOWCS=1; AC_SUBST([HAVE_MBSNRTOWCS])
- HAVE_WCRTOMB=1; AC_SUBST([HAVE_WCRTOMB])
- HAVE_WCSRTOMBS=1; AC_SUBST([HAVE_WCSRTOMBS])
- HAVE_WCSNRTOMBS=1; AC_SUBST([HAVE_WCSNRTOMBS])
- HAVE_WMEMCHR=1; AC_SUBST([HAVE_WMEMCHR])
- HAVE_WMEMCMP=1; AC_SUBST([HAVE_WMEMCMP])
- HAVE_WMEMCPY=1; AC_SUBST([HAVE_WMEMCPY])
- HAVE_WMEMMOVE=1; AC_SUBST([HAVE_WMEMMOVE])
- HAVE_WMEMSET=1; AC_SUBST([HAVE_WMEMSET])
- HAVE_WCSLEN=1; AC_SUBST([HAVE_WCSLEN])
- HAVE_WCSNLEN=1; AC_SUBST([HAVE_WCSNLEN])
- HAVE_WCSCPY=1; AC_SUBST([HAVE_WCSCPY])
- HAVE_WCPCPY=1; AC_SUBST([HAVE_WCPCPY])
- HAVE_WCSNCPY=1; AC_SUBST([HAVE_WCSNCPY])
- HAVE_WCPNCPY=1; AC_SUBST([HAVE_WCPNCPY])
- HAVE_WCSCAT=1; AC_SUBST([HAVE_WCSCAT])
- HAVE_WCSNCAT=1; AC_SUBST([HAVE_WCSNCAT])
- HAVE_WCSCMP=1; AC_SUBST([HAVE_WCSCMP])
- HAVE_WCSNCMP=1; AC_SUBST([HAVE_WCSNCMP])
- HAVE_WCSCASECMP=1; AC_SUBST([HAVE_WCSCASECMP])
- HAVE_WCSNCASECMP=1; AC_SUBST([HAVE_WCSNCASECMP])
- HAVE_WCSCOLL=1; AC_SUBST([HAVE_WCSCOLL])
- HAVE_WCSXFRM=1; AC_SUBST([HAVE_WCSXFRM])
- HAVE_WCSDUP=1; AC_SUBST([HAVE_WCSDUP])
- HAVE_WCSCHR=1; AC_SUBST([HAVE_WCSCHR])
- HAVE_WCSRCHR=1; AC_SUBST([HAVE_WCSRCHR])
- HAVE_WCSCSPN=1; AC_SUBST([HAVE_WCSCSPN])
- HAVE_WCSSPN=1; AC_SUBST([HAVE_WCSSPN])
- HAVE_WCSPBRK=1; AC_SUBST([HAVE_WCSPBRK])
- HAVE_WCSSTR=1; AC_SUBST([HAVE_WCSSTR])
- HAVE_WCSTOK=1; AC_SUBST([HAVE_WCSTOK])
- HAVE_WCSWIDTH=1; AC_SUBST([HAVE_WCSWIDTH])
- HAVE_DECL_WCTOB=1; AC_SUBST([HAVE_DECL_WCTOB])
- HAVE_DECL_WCWIDTH=1; AC_SUBST([HAVE_DECL_WCWIDTH])
- REPLACE_MBSTATE_T=0; AC_SUBST([REPLACE_MBSTATE_T])
- REPLACE_BTOWC=0; AC_SUBST([REPLACE_BTOWC])
- REPLACE_WCTOB=0; AC_SUBST([REPLACE_WCTOB])
- REPLACE_MBSINIT=0; AC_SUBST([REPLACE_MBSINIT])
- REPLACE_MBRTOWC=0; AC_SUBST([REPLACE_MBRTOWC])
- REPLACE_MBRLEN=0; AC_SUBST([REPLACE_MBRLEN])
- REPLACE_MBSRTOWCS=0; AC_SUBST([REPLACE_MBSRTOWCS])
- REPLACE_MBSNRTOWCS=0; AC_SUBST([REPLACE_MBSNRTOWCS])
- REPLACE_WCRTOMB=0; AC_SUBST([REPLACE_WCRTOMB])
- REPLACE_WCSRTOMBS=0; AC_SUBST([REPLACE_WCSRTOMBS])
- REPLACE_WCSNRTOMBS=0; AC_SUBST([REPLACE_WCSNRTOMBS])
- REPLACE_WCWIDTH=0; AC_SUBST([REPLACE_WCWIDTH])
- REPLACE_WCSWIDTH=0; AC_SUBST([REPLACE_WCSWIDTH])
-])
+++ /dev/null
-# wchar_t.m4 serial 4 (gettext-0.18.2)
-dnl Copyright (C) 2002-2003, 2008-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-dnl Test whether <stddef.h> has the 'wchar_t' type.
-dnl Prerequisite: AC_PROG_CC
-
-AC_DEFUN([gt_TYPE_WCHAR_T],
-[
- AC_CACHE_CHECK([for wchar_t], [gt_cv_c_wchar_t],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[#include <stddef.h>
- wchar_t foo = (wchar_t)'\0';]],
- [[]])],
- [gt_cv_c_wchar_t=yes],
- [gt_cv_c_wchar_t=no])])
- if test $gt_cv_c_wchar_t = yes; then
- AC_DEFINE([HAVE_WCHAR_T], [1], [Define if you have the 'wchar_t' type.])
- fi
-])
+++ /dev/null
-# wctype_h.m4 serial 16
-
-dnl A placeholder for ISO C99 <wctype.h>, for platforms that lack it.
-
-dnl Copyright (C) 2006-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Written by Paul Eggert.
-
-AC_DEFUN([gl_WCTYPE_H],
-[
- AC_REQUIRE([gl_WCTYPE_H_DEFAULTS])
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_CHECK_FUNCS_ONCE([iswcntrl])
- if test $ac_cv_func_iswcntrl = yes; then
- HAVE_ISWCNTRL=1
- else
- HAVE_ISWCNTRL=0
- fi
- AC_SUBST([HAVE_ISWCNTRL])
-
- AC_REQUIRE([AC_C_INLINE])
-
- AC_REQUIRE([gt_TYPE_WINT_T])
- if test $gt_cv_c_wint_t = yes; then
- HAVE_WINT_T=1
- else
- HAVE_WINT_T=0
- fi
- AC_SUBST([HAVE_WINT_T])
-
- gl_CHECK_NEXT_HEADERS([wctype.h])
- if test $ac_cv_header_wctype_h = yes; then
- if test $ac_cv_func_iswcntrl = yes; then
- dnl Linux libc5 has an iswprint function that returns 0 for all arguments.
- dnl The other functions are likely broken in the same way.
- AC_CACHE_CHECK([whether iswcntrl works], [gl_cv_func_iswcntrl_works],
- [
- AC_RUN_IFELSE(
- [AC_LANG_SOURCE([[
- /* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be
- included before <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h>
- must be included before <wchar.h>. */
- #include <stddef.h>
- #include <stdio.h>
- #include <time.h>
- #include <wchar.h>
- #include <wctype.h>
- int main () { return iswprint ('x') == 0; }
- ]])],
- [gl_cv_func_iswcntrl_works=yes], [gl_cv_func_iswcntrl_works=no],
- [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <stdlib.h>
- #if __GNU_LIBRARY__ == 1
- Linux libc5 i18n is broken.
- #endif]], [])],
- [gl_cv_func_iswcntrl_works=yes], [gl_cv_func_iswcntrl_works=no])
- ])
- ])
- fi
- HAVE_WCTYPE_H=1
- else
- HAVE_WCTYPE_H=0
- fi
- AC_SUBST([HAVE_WCTYPE_H])
-
- if test "$gl_cv_func_iswcntrl_works" = no; then
- REPLACE_ISWCNTRL=1
- else
- REPLACE_ISWCNTRL=0
- fi
- AC_SUBST([REPLACE_ISWCNTRL])
-
- if test $HAVE_ISWCNTRL = 0 || test $REPLACE_ISWCNTRL = 1; then
- dnl Redefine all of iswcntrl, ..., iswxdigit in <wctype.h>.
- :
- fi
-
- if test $REPLACE_ISWCNTRL = 1; then
- REPLACE_TOWLOWER=1
- else
- AC_CHECK_FUNCS([towlower])
- if test $ac_cv_func_towlower = yes; then
- REPLACE_TOWLOWER=0
- else
- AC_CHECK_DECLS([towlower],,,
- [[/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be
- included before <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h>
- must be included before <wchar.h>. */
- #include <stddef.h>
- #include <stdio.h>
- #include <time.h>
- #include <wchar.h>
- #if HAVE_WCTYPE_H
- # include <wctype.h>
- #endif
- ]])
- if test $ac_cv_have_decl_towlower = yes; then
- dnl On Minix 3.1.8, the system's <wctype.h> declares towlower() and
- dnl towupper() although it does not have the functions. Avoid a
- dnl collision with gnulib's replacement.
- REPLACE_TOWLOWER=1
- else
- REPLACE_TOWLOWER=0
- fi
- fi
- fi
- AC_SUBST([REPLACE_TOWLOWER])
-
- if test $HAVE_ISWCNTRL = 0 || test $REPLACE_TOWLOWER = 1; then
- dnl Redefine towlower, towupper in <wctype.h>.
- :
- fi
-
- dnl We assume that the wctype() and iswctype() functions exist if and only
- dnl if the type wctype_t is defined in <wchar.h> or in <wctype.h> if that
- dnl exists.
- dnl HP-UX 11.00 declares all these in <wchar.h> and lacks <wctype.h>.
- AC_CACHE_CHECK([for wctype_t], [gl_cv_type_wctype_t],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be
- included before <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h>
- must be included before <wchar.h>. */
- #include <stddef.h>
- #include <stdio.h>
- #include <time.h>
- #include <wchar.h>
- #if HAVE_WCTYPE_H
- # include <wctype.h>
- #endif
- wctype_t a;
- ]],
- [[]])],
- [gl_cv_type_wctype_t=yes],
- [gl_cv_type_wctype_t=no])
- ])
- if test $gl_cv_type_wctype_t = no; then
- HAVE_WCTYPE_T=0
- fi
-
- dnl We assume that the wctrans() and towctrans() functions exist if and only
- dnl if the type wctrans_t is defined in <wctype.h>.
- AC_CACHE_CHECK([for wctrans_t], [gl_cv_type_wctrans_t],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be
- included before <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h>
- must be included before <wchar.h>. */
- #include <stddef.h>
- #include <stdio.h>
- #include <time.h>
- #include <wchar.h>
- #include <wctype.h>
- wctrans_t a;
- ]],
- [[]])],
- [gl_cv_type_wctrans_t=yes],
- [gl_cv_type_wctrans_t=no])
- ])
- if test $gl_cv_type_wctrans_t = no; then
- HAVE_WCTRANS_T=0
- fi
-
- dnl Check for declarations of anything we want to poison if the
- dnl corresponding gnulib module is not in use.
- gl_WARN_ON_USE_PREPARE([[
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be
- included before <wchar.h>. */
-#if !(defined __GLIBC__ && !defined __UCLIBC__)
-# include <stddef.h>
-# include <stdio.h>
-# include <time.h>
-# include <wchar.h>
-#endif
-#include <wctype.h>
- ]],
- [wctype iswctype wctrans towctrans
- ])
-])
-
-AC_DEFUN([gl_WCTYPE_MODULE_INDICATOR],
-[
- dnl Use AC_REQUIRE here, so that the default settings are expanded once only.
- AC_REQUIRE([gl_WCTYPE_H_DEFAULTS])
- gl_MODULE_INDICATOR_SET_VARIABLE([$1])
- dnl Define it also as a C macro, for the benefit of the unit tests.
- gl_MODULE_INDICATOR_FOR_TESTS([$1])
-])
-
-AC_DEFUN([gl_WCTYPE_H_DEFAULTS],
-[
- GNULIB_ISWBLANK=0; AC_SUBST([GNULIB_ISWBLANK])
- GNULIB_WCTYPE=0; AC_SUBST([GNULIB_WCTYPE])
- GNULIB_ISWCTYPE=0; AC_SUBST([GNULIB_ISWCTYPE])
- GNULIB_WCTRANS=0; AC_SUBST([GNULIB_WCTRANS])
- GNULIB_TOWCTRANS=0; AC_SUBST([GNULIB_TOWCTRANS])
- dnl Assume proper GNU behavior unless another module says otherwise.
- HAVE_ISWBLANK=1; AC_SUBST([HAVE_ISWBLANK])
- HAVE_WCTYPE_T=1; AC_SUBST([HAVE_WCTYPE_T])
- HAVE_WCTRANS_T=1; AC_SUBST([HAVE_WCTRANS_T])
- REPLACE_ISWBLANK=0; AC_SUBST([REPLACE_ISWBLANK])
-])
+++ /dev/null
-# wint_t.m4 serial 5 (gettext-0.18.2)
-dnl Copyright (C) 2003, 2007-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-dnl Test whether <wchar.h> has the 'wint_t' type.
-dnl Prerequisite: AC_PROG_CC
-
-AC_DEFUN([gt_TYPE_WINT_T],
-[
- AC_CACHE_CHECK([for wint_t], [gt_cv_c_wint_t],
- [AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
- <wchar.h>.
- BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be included
- before <wchar.h>. */
-#include <stddef.h>
-#include <stdio.h>
-#include <time.h>
-#include <wchar.h>
- wint_t foo = (wchar_t)'\0';]],
- [[]])],
- [gt_cv_c_wint_t=yes],
- [gt_cv_c_wint_t=no])])
- if test $gt_cv_c_wint_t = yes; then
- AC_DEFINE([HAVE_WINT_T], [1], [Define if you have the 'wint_t' type.])
- fi
-])
+++ /dev/null
-# xalloc.m4 serial 17
-dnl Copyright (C) 2002-2006, 2009-2012 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([gl_XALLOC],
-[
- gl_PREREQ_XALLOC
- gl_PREREQ_XMALLOC
-])
-
-# Prerequisites of lib/xalloc.h.
-AC_DEFUN([gl_PREREQ_XALLOC], [
- AC_REQUIRE([gl_INLINE])
- :
-])
-
-# Prerequisites of lib/xmalloc.c.
-AC_DEFUN([gl_PREREQ_XMALLOC], [
- :
-])
+++ /dev/null
-# -*-Makefile-*-
-# This Makefile fragment tries to be general-purpose enough to be
-# used by many projects via the gnulib maintainer-makefile module.
-
-## Copyright (C) 2001-2012 Free Software Foundation, Inc.
-##
-## This program is free software: you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation, either version 3 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# This is reported not to work with make-3.79.1
-# ME := $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))
-ME := maint.mk
-
-# Diagnostic for continued use of deprecated variable.
-# Remove in 2013
-ifneq ($(build_aux),)
- $(error "$(ME): \
-set $$(_build-aux) relative to $$(srcdir) instead of $$(build_aux)")
-endif
-
-# Do not save the original name or timestamp in the .tar.gz file.
-# Use --rsyncable if available.
-gzip_rsyncable := \
- $(shell gzip --help 2>/dev/null|grep rsyncable >/dev/null \
- && printf %s --rsyncable)
-GZIP_ENV = '--no-name --best $(gzip_rsyncable)'
-
-GIT = git
-VC = $(GIT)
-
-VC_LIST = $(srcdir)/$(_build-aux)/vc-list-files -C $(srcdir)
-
-# You can override this variable in cfg.mk to set your own regexp
-# matching files to ignore.
-VC_LIST_ALWAYS_EXCLUDE_REGEX ?= ^$$
-
-# This is to preprocess robustly the output of $(VC_LIST), so that even
-# when $(srcdir) is a pathological name like "....", the leading sed command
-# removes only the intended prefix.
-_dot_escaped_srcdir = $(subst .,\.,$(srcdir))
-
-# Post-process $(VC_LIST) output, prepending $(srcdir)/, but only
-# when $(srcdir) is not ".".
-ifeq ($(srcdir),.)
-_prepend_srcdir_prefix =
-else
-_prepend_srcdir_prefix = | sed 's|^|$(srcdir)/|'
-endif
-
-# In order to be able to consistently filter "."-relative names,
-# (i.e., with no $(srcdir) prefix), this definition is careful to
-# remove any $(srcdir) prefix, and to restore what it removes.
-_sc_excl = \
- $(if $(exclude_file_name_regexp--$@),$(exclude_file_name_regexp--$@),^$$)
-VC_LIST_EXCEPT = \
- $(VC_LIST) | sed 's|^$(_dot_escaped_srcdir)/||' \
- | if test -f $(srcdir)/.x-$@; then grep -vEf $(srcdir)/.x-$@; \
- else grep -Ev -e "$${VC_LIST_EXCEPT_DEFAULT-ChangeLog}"; fi \
- | grep -Ev -e '($(VC_LIST_ALWAYS_EXCLUDE_REGEX)|$(_sc_excl))' \
- $(_prepend_srcdir_prefix)
-
-ifeq ($(origin prev_version_file), undefined)
- prev_version_file = $(srcdir)/.prev-version
-endif
-
-PREV_VERSION := $(shell cat $(prev_version_file) 2>/dev/null)
-VERSION_REGEXP = $(subst .,\.,$(VERSION))
-PREV_VERSION_REGEXP = $(subst .,\.,$(PREV_VERSION))
-
-ifeq ($(VC),$(GIT))
-this-vc-tag = v$(VERSION)
-this-vc-tag-regexp = v$(VERSION_REGEXP)
-else
-tag-package = $(shell echo "$(PACKAGE)" | tr '[:lower:]' '[:upper:]')
-tag-this-version = $(subst .,_,$(VERSION))
-this-vc-tag = $(tag-package)-$(tag-this-version)
-this-vc-tag-regexp = $(this-vc-tag)
-endif
-my_distdir = $(PACKAGE)-$(VERSION)
-
-# Old releases are stored here.
-release_archive_dir ?= ../release
-
-# Override gnu_rel_host and url_dir_list in cfg.mk if these are not right.
-# Use alpha.gnu.org for alpha and beta releases.
-# Use ftp.gnu.org for stable releases.
-gnu_ftp_host-alpha = alpha.gnu.org
-gnu_ftp_host-beta = alpha.gnu.org
-gnu_ftp_host-stable = ftp.gnu.org
-gnu_rel_host ?= $(gnu_ftp_host-$(RELEASE_TYPE))
-
-ifeq ($(gnu_rel_host),ftp.gnu.org)
-url_dir_list ?= http://ftpmirror.gnu.org/$(PACKAGE)
-else
-url_dir_list ?= ftp://$(gnu_rel_host)/gnu/$(PACKAGE)
-endif
-
-# Override this in cfg.mk if you are using a different format in your
-# NEWS file.
-today = $(shell date +%Y-%m-%d)
-
-# Select which lines of NEWS are searched for $(news-check-regexp).
-# This is a sed line number spec. The default says that we search
-# lines 1..10 of NEWS for $(news-check-regexp).
-# If you want to search only line 3 or only lines 20-22, use "3" or "20,22".
-news-check-lines-spec ?= 1,10
-news-check-regexp ?= '^\*.* $(VERSION_REGEXP) \($(today)\)'
-
-# Prevent programs like 'sort' from considering distinct strings to be equal.
-# Doing it here saves us from having to set LC_ALL elsewhere in this file.
-export LC_ALL = C
-
-## --------------- ##
-## Sanity checks. ##
-## --------------- ##
-
-_cfg_mk := $(shell test -f $(srcdir)/cfg.mk && echo '$(srcdir)/cfg.mk')
-
-# Collect the names of rules starting with 'sc_'.
-syntax-check-rules := $(sort $(shell sed -n 's/^\(sc_[a-zA-Z0-9_-]*\):.*/\1/p' \
- $(srcdir)/$(ME) $(_cfg_mk)))
-.PHONY: $(syntax-check-rules)
-
-ifeq ($(shell $(VC_LIST) >/dev/null 2>&1; echo $$?),0)
-local-checks-available += $(syntax-check-rules)
-else
-local-checks-available += no-vc-detected
-no-vc-detected:
- @echo "No version control files detected; skipping syntax check"
-endif
-.PHONY: $(local-checks-available)
-
-# Arrange to print the name of each syntax-checking rule just before running it.
-$(syntax-check-rules): %: %.m
-sc_m_rules_ = $(patsubst %, %.m, $(syntax-check-rules))
-.PHONY: $(sc_m_rules_)
-$(sc_m_rules_):
- @echo $(patsubst sc_%.m, %, $@)
- @date +%s.%N > .sc-start-$(basename $@)
-
-# Compute and print the elapsed time for each syntax-check rule.
-sc_z_rules_ = $(patsubst %, %.z, $(syntax-check-rules))
-.PHONY: $(sc_z_rules_)
-$(sc_z_rules_): %.z: %
- @end=$$(date +%s.%N); \
- start=$$(cat .sc-start-$*); \
- rm -f .sc-start-$*; \
- awk -v s=$$start -v e=$$end \
- 'END {printf "%.2f $(patsubst sc_%,%,$*)\n", e - s}' < /dev/null
-
-# The patsubst here is to replace each sc_% rule with its sc_%.z wrapper
-# that computes and prints elapsed time.
-local-check := \
- $(patsubst sc_%, sc_%.z, \
- $(filter-out $(local-checks-to-skip), $(local-checks-available)))
-
-syntax-check: $(local-check)
-
-# _sc_search_regexp
-#
-# This macro searches for a given construct in the selected files and
-# then takes some action.
-#
-# Parameters (shell variables):
-#
-# prohibit | require
-#
-# Regular expression (ERE) denoting either a forbidden construct
-# or a required construct. Those arguments are exclusive.
-#
-# exclude
-#
-# Regular expression (ERE) denoting lines to ignore that matched
-# a prohibit construct. For example, this can be used to exclude
-# comments that mention why the nearby code uses an alternative
-# construct instead of the simpler prohibited construct.
-#
-# in_vc_files | in_files
-#
-# grep-E-style regexp denoting the files to check. If no files
-# are specified the default are all the files that are under
-# version control.
-#
-# containing | non_containing
-#
-# Select the files (non) containing strings matching this regexp.
-# If both arguments are specified then CONTAINING takes
-# precedence.
-#
-# with_grep_options
-#
-# Extra options for grep.
-#
-# ignore_case
-#
-# Ignore case.
-#
-# halt
-#
-# Message to display before to halting execution.
-#
-# Finally, you may exempt files based on an ERE matching file names.
-# For example, to exempt from the sc_space_tab check all files with the
-# .diff suffix, set this Make variable:
-#
-# exclude_file_name_regexp--sc_space_tab = \.diff$
-#
-# Note that while this functionality is mostly inherited via VC_LIST_EXCEPT,
-# when filtering by name via in_files, we explicitly filter out matching
-# names here as well.
-
-# Initialize each, so that envvar settings cannot interfere.
-export require =
-export prohibit =
-export exclude =
-export in_vc_files =
-export in_files =
-export containing =
-export non_containing =
-export halt =
-export with_grep_options =
-
-# By default, _sc_search_regexp does not ignore case.
-export ignore_case =
-_ignore_case = $$(test -n "$$ignore_case" && printf %s -i || :)
-
-define _sc_say_and_exit
- dummy=; : so we do not need a semicolon before each use; \
- { printf '%s\n' "$(ME): $$msg" 1>&2; exit 1; };
-endef
-
-define _sc_search_regexp
- dummy=; : so we do not need a semicolon before each use; \
- \
- : Check arguments; \
- test -n "$$prohibit" && test -n "$$require" \
- && { msg='Cannot specify both prohibit and require' \
- $(_sc_say_and_exit) } || :; \
- test -z "$$prohibit" && test -z "$$require" \
- && { msg='Should specify either prohibit or require' \
- $(_sc_say_and_exit) } || :; \
- test -z "$$prohibit" && test -n "$$exclude" \
- && { msg='Use of exclude requires a prohibit pattern' \
- $(_sc_say_and_exit) } || :; \
- test -n "$$in_vc_files" && test -n "$$in_files" \
- && { msg='Cannot specify both in_vc_files and in_files' \
- $(_sc_say_and_exit) } || :; \
- test "x$$halt" != x \
- || { msg='halt not defined' $(_sc_say_and_exit) }; \
- \
- : Filter by file name; \
- if test -n "$$in_files"; then \
- files=$$(find $(srcdir) | grep -E "$$in_files" \
- | grep -Ev '$(exclude_file_name_regexp--$@)'); \
- else \
- files=$$($(VC_LIST_EXCEPT)); \
- if test -n "$$in_vc_files"; then \
- files=$$(echo "$$files" | grep -E "$$in_vc_files"); \
- fi; \
- fi; \
- \
- : Filter by content; \
- test -n "$$files" && test -n "$$containing" \
- && { files=$$(grep -l "$$containing" $$files); } || :; \
- test -n "$$files" && test -n "$$non_containing" \
- && { files=$$(grep -vl "$$non_containing" $$files); } || :; \
- \
- : Check for the construct; \
- if test -n "$$files"; then \
- if test -n "$$prohibit"; then \
- grep $$with_grep_options $(_ignore_case) -nE "$$prohibit" $$files \
- | grep -vE "$${exclude:-^$$}" \
- && { msg="$$halt" $(_sc_say_and_exit) } || :; \
- else \
- grep $$with_grep_options $(_ignore_case) -LE "$$require" $$files \
- | grep . \
- && { msg="$$halt" $(_sc_say_and_exit) } || :; \
- fi \
- else :; \
- fi || :;
-endef
-
-sc_avoid_if_before_free:
- @$(srcdir)/$(_build-aux)/useless-if-before-free \
- $(useless_free_options) \
- $$($(VC_LIST_EXCEPT) | grep -v useless-if-before-free) && \
- { echo '$(ME): found useless "if" before "free" above' 1>&2; \
- exit 1; } || :
-
-sc_cast_of_argument_to_free:
- @prohibit='\<free *\( *\(' halt="don't cast free argument" \
- $(_sc_search_regexp)
-
-sc_cast_of_x_alloc_return_value:
- @prohibit='\*\) *x(m|c|re)alloc\>' \
- halt="don't cast x*alloc return value" \
- $(_sc_search_regexp)
-
-sc_cast_of_alloca_return_value:
- @prohibit='\*\) *alloca\>' \
- halt="don't cast alloca return value" \
- $(_sc_search_regexp)
-
-sc_space_tab:
- @prohibit='[ ] ' \
- halt='found SPACE-TAB sequence; remove the SPACE' \
- $(_sc_search_regexp)
-
-# Don't use *scanf or the old ato* functions in "real" code.
-# They provide no error checking mechanism.
-# Instead, use strto* functions.
-sc_prohibit_atoi_atof:
- @prohibit='\<([fs]?scanf|ato([filq]|ll)) *\(' \
- halt='do not use *scan''f, ato''f, ato''i, ato''l, ato''ll or ato''q' \
- $(_sc_search_regexp)
-
-# Use STREQ rather than comparing strcmp == 0, or != 0.
-sp_ = strcmp *\(.+\)
-sc_prohibit_strcmp:
- @prohibit='! *strcmp *\(|\<$(sp_) *[!=]=|[!=]= *$(sp_)' \
- exclude=':# *define STRN?EQ\(' \
- halt='$(ME): replace strcmp calls above with STREQ/STRNEQ' \
- $(_sc_search_regexp)
-
-# Pass EXIT_*, not number, to usage, exit, and error (when exiting)
-# Convert all uses automatically, via these two commands:
-# git grep -l '\<exit *(1)' \
-# | grep -vEf .x-sc_prohibit_magic_number_exit \
-# | xargs --no-run-if-empty \
-# perl -pi -e 's/(^|[^.])\b(exit ?)\(1\)/$1$2(EXIT_FAILURE)/'
-# git grep -l '\<exit *(0)' \
-# | grep -vEf .x-sc_prohibit_magic_number_exit \
-# | xargs --no-run-if-empty \
-# perl -pi -e 's/(^|[^.])\b(exit ?)\(0\)/$1$2(EXIT_SUCCESS)/'
-sc_prohibit_magic_number_exit:
- @prohibit='(^|[^.])\<(usage|exit) ?\([0-9]|\<error ?\([1-9][0-9]*,' \
- halt='use EXIT_* values rather than magic number' \
- $(_sc_search_regexp)
-
-# Using EXIT_SUCCESS as the first argument to error is misleading,
-# since when that parameter is 0, error does not exit. Use '0' instead.
-sc_error_exit_success:
- @prohibit='error *\(EXIT_SUCCESS,' \
- in_vc_files='\.[chly]$$' \
- halt='found error (EXIT_SUCCESS' \
- $(_sc_search_regexp)
-
-# "FATAL:" should be fully upper-cased in error messages
-# "WARNING:" should be fully upper-cased, or fully lower-cased
-sc_error_message_warn_fatal:
- @grep -nEA2 '[^rp]error *\(' $$($(VC_LIST_EXCEPT)) \
- | grep -E '"Warning|"Fatal|"fatal' && \
- { echo '$(ME): use FATAL, WARNING or warning' 1>&2; \
- exit 1; } || :
-
-# Error messages should not start with a capital letter
-sc_error_message_uppercase:
- @grep -nEA2 '[^rp]error *\(' $$($(VC_LIST_EXCEPT)) \
- | grep -E '"[A-Z]' \
- | grep -vE '"FATAL|"WARNING|"Java|"C#|PRIuMAX' && \
- { echo '$(ME): found capitalized error message' 1>&2; \
- exit 1; } || :
-
-# Error messages should not end with a period
-sc_error_message_period:
- @grep -nEA2 '[^rp]error *\(' $$($(VC_LIST_EXCEPT)) \
- | grep -E '[^."]\."' && \
- { echo '$(ME): found error message ending in period' 1>&2; \
- exit 1; } || :
-
-sc_file_system:
- @prohibit=file''system \
- ignore_case=1 \
- halt='found use of "file''system"; spell it "file system"' \
- $(_sc_search_regexp)
-
-# Don't use cpp tests of this symbol. All code assumes config.h is included.
-sc_prohibit_have_config_h:
- @prohibit='^# *if.*HAVE''_CONFIG_H' \
- halt='found use of HAVE''_CONFIG_H; remove' \
- $(_sc_search_regexp)
-
-# Nearly all .c files must include <config.h>. However, we also permit this
-# via inclusion of a package-specific header, if cfg.mk specified one.
-# config_h_header must be suitable for grep -E.
-config_h_header ?= <config\.h>
-sc_require_config_h:
- @require='^# *include $(config_h_header)' \
- in_vc_files='\.c$$' \
- halt='the above files do not include <config.h>' \
- $(_sc_search_regexp)
-
-# You must include <config.h> before including any other header file.
-# This can possibly be via a package-specific header, if given by cfg.mk.
-sc_require_config_h_first:
- @if $(VC_LIST_EXCEPT) | grep -l '\.c$$' > /dev/null; then \
- fail=0; \
- for i in $$($(VC_LIST_EXCEPT) | grep '\.c$$'); do \
- grep '^# *include\>' $$i | sed 1q \
- | grep -E '^# *include $(config_h_header)' > /dev/null \
- || { echo $$i; fail=1; }; \
- done; \
- test $$fail = 1 && \
- { echo '$(ME): the above files include some other header' \
- 'before <config.h>' 1>&2; exit 1; } || :; \
- else :; \
- fi
-
-sc_prohibit_HAVE_MBRTOWC:
- @prohibit='\bHAVE_MBRTOWC\b' \
- halt="do not use $$prohibit; it is always defined" \
- $(_sc_search_regexp)
-
-# To use this "command" macro, you must first define two shell variables:
-# h: the header name, with no enclosing <> or ""
-# re: a regular expression that matches IFF something provided by $h is used.
-define _sc_header_without_use
- dummy=; : so we do not need a semicolon before each use; \
- h_esc=`echo '[<"]'"$$h"'[">]'|sed 's/\./\\\\./g'`; \
- if $(VC_LIST_EXCEPT) | grep -l '\.c$$' > /dev/null; then \
- files=$$(grep -l '^# *include '"$$h_esc" \
- $$($(VC_LIST_EXCEPT) | grep '\.c$$')) && \
- grep -LE "$$re" $$files | grep . && \
- { echo "$(ME): the above files include $$h but don't use it" \
- 1>&2; exit 1; } || :; \
- else :; \
- fi
-endef
-
-# Prohibit the inclusion of assert.h without an actual use of assert.
-sc_prohibit_assert_without_use:
- @h='assert.h' re='\<assert *\(' $(_sc_header_without_use)
-
-# Prohibit the inclusion of close-stream.h without an actual use.
-sc_prohibit_close_stream_without_use:
- @h='close-stream.h' re='\<close_stream *\(' $(_sc_header_without_use)
-
-# Prohibit the inclusion of getopt.h without an actual use.
-sc_prohibit_getopt_without_use:
- @h='getopt.h' re='\<getopt(_long)? *\(' $(_sc_header_without_use)
-
-# Don't include quotearg.h unless you use one of its functions.
-sc_prohibit_quotearg_without_use:
- @h='quotearg.h' re='\<quotearg(_[^ ]+)? *\(' $(_sc_header_without_use)
-
-# Don't include quote.h unless you use one of its functions.
-sc_prohibit_quote_without_use:
- @h='quote.h' re='\<quote((_n)? *\(|_quoting_options\>)' \
- $(_sc_header_without_use)
-
-# Don't include this header unless you use one of its functions.
-sc_prohibit_long_options_without_use:
- @h='long-options.h' re='\<parse_long_options *\(' \
- $(_sc_header_without_use)
-
-# Don't include this header unless you use one of its functions.
-sc_prohibit_inttostr_without_use:
- @h='inttostr.h' re='\<(off|[iu]max|uint)tostr *\(' \
- $(_sc_header_without_use)
-
-# Don't include this header unless you use one of its functions.
-sc_prohibit_ignore_value_without_use:
- @h='ignore-value.h' re='\<ignore_(value|ptr) *\(' \
- $(_sc_header_without_use)
-
-# Don't include this header unless you use one of its functions.
-sc_prohibit_error_without_use:
- @h='error.h' \
- re='\<error(_at_line|_print_progname|_one_per_line|_message_count)? *\('\
- $(_sc_header_without_use)
-
-# Don't include xalloc.h unless you use one of its functions.
-# Consider these symbols:
-# perl -lne '/^# *define (\w+)\(/ and print $1' lib/xalloc.h|grep -v '^__';
-# perl -lne '/^(?:extern )?(?:void|char) \*?(\w+) *\(/ and print $1' lib/xalloc.h
-# Divide into two sets on case, and filter each through this:
-# | sort | perl -MRegexp::Assemble -le \
-# 'print Regexp::Assemble->new(file => "/dev/stdin")->as_string'|sed 's/\?://g'
-# Note this was produced by the above:
-# _xa1 = \
-#x(((2n?)?re|c(har)?|n(re|m)|z)alloc|alloc_(oversized|die)|m(alloc|emdup)|strdup)
-# But we can do better, in at least two ways:
-# 1) take advantage of two "dup"-suffixed strings:
-# x(((2n?)?re|c(har)?|n(re|m)|[mz])alloc|alloc_(oversized|die)|(mem|str)dup)
-# 2) notice that "c(har)?|[mz]" is equivalent to the shorter and more readable
-# "char|[cmz]"
-# x(((2n?)?re|char|n(re|m)|[cmz])alloc|alloc_(oversized|die)|(mem|str)dup)
-_xa1 = x(((2n?)?re|char|n(re|m)|[cmz])alloc|alloc_(oversized|die)|(mem|str)dup)
-_xa2 = X([CZ]|N?M)ALLOC
-sc_prohibit_xalloc_without_use:
- @h='xalloc.h' \
- re='\<($(_xa1)|$(_xa2)) *\('\
- $(_sc_header_without_use)
-
-# Extract function names:
-# perl -lne '/^(?:extern )?(?:void|char) \*?(\w+) *\(/ and print $1' lib/hash.h
-_hash_re = \
-clear|delete|free|get_(first|next)|insert|lookup|print_statistics|reset_tuning
-_hash_fn = \<($(_hash_re)) *\(
-_hash_struct = (struct )?\<[Hh]ash_(table|tuning)\>
-sc_prohibit_hash_without_use:
- @h='hash.h' \
- re='$(_hash_fn)|$(_hash_struct)'\
- $(_sc_header_without_use)
-
-sc_prohibit_cloexec_without_use:
- @h='cloexec.h' re='\<(set_cloexec_flag|dup_cloexec) *\(' \
- $(_sc_header_without_use)
-
-sc_prohibit_posixver_without_use:
- @h='posixver.h' re='\<posix2_version *\(' $(_sc_header_without_use)
-
-sc_prohibit_same_without_use:
- @h='same.h' re='\<same_name *\(' $(_sc_header_without_use)
-
-sc_prohibit_hash_pjw_without_use:
- @h='hash-pjw.h' \
- re='\<hash_pjw\>' \
- $(_sc_header_without_use)
-
-sc_prohibit_safe_read_without_use:
- @h='safe-read.h' re='(\<SAFE_READ_ERROR\>|\<safe_read *\()' \
- $(_sc_header_without_use)
-
-sc_prohibit_argmatch_without_use:
- @h='argmatch.h' \
- re='(\<(ARRAY_CARDINALITY|X?ARGMATCH(|_TO_ARGUMENT|_VERIFY))\>|\<(invalid_arg|argmatch(_exit_fn|_(in)?valid)?) *\()' \
- $(_sc_header_without_use)
-
-sc_prohibit_canonicalize_without_use:
- @h='canonicalize.h' \
- re='CAN_(EXISTING|ALL_BUT_LAST|MISSING)|canonicalize_(mode_t|filename_mode|file_name)' \
- $(_sc_header_without_use)
-
-sc_prohibit_root_dev_ino_without_use:
- @h='root-dev-ino.h' \
- re='(\<ROOT_DEV_INO_(CHECK|WARN)\>|\<get_root_dev_ino *\()' \
- $(_sc_header_without_use)
-
-sc_prohibit_openat_without_use:
- @h='openat.h' \
- re='\<(openat_(permissive|needs_fchdir|(save|restore)_fail)|l?(stat|ch(own|mod))at|(euid)?accessat)\>' \
- $(_sc_header_without_use)
-
-# Prohibit the inclusion of c-ctype.h without an actual use.
-ctype_re = isalnum|isalpha|isascii|isblank|iscntrl|isdigit|isgraph|islower\
-|isprint|ispunct|isspace|isupper|isxdigit|tolower|toupper
-sc_prohibit_c_ctype_without_use:
- @h='c-ctype.h' re='\<c_($(ctype_re)) *\(' \
- $(_sc_header_without_use)
-
-_empty =
-_sp = $(_empty) $(_empty)
-# The following list was generated by running:
-# man signal.h|col -b|perl -ne '/bsd_signal.*;/.../sigwaitinfo.*;/ and print' \
-# | perl -lne '/^\s+(?:int|void).*?(\w+).*/ and print $1' | fmt
-_sig_functions = \
- bsd_signal kill killpg pthread_kill pthread_sigmask raise sigaction \
- sigaddset sigaltstack sigdelset sigemptyset sigfillset sighold sigignore \
- siginterrupt sigismember signal sigpause sigpending sigprocmask sigqueue \
- sigrelse sigset sigsuspend sigtimedwait sigwait sigwaitinfo
-_sig_function_re = $(subst $(_sp),|,$(strip $(_sig_functions)))
-# The following were extracted from "man signal.h" manually.
-_sig_types_and_consts = \
- MINSIGSTKSZ SA_NOCLDSTOP SA_NOCLDWAIT SA_NODEFER SA_ONSTACK \
- SA_RESETHAND SA_RESTART SA_SIGINFO SIGEV_NONE SIGEV_SIGNAL \
- SIGEV_THREAD SIGSTKSZ SIG_BLOCK SIG_SETMASK SIG_UNBLOCK SS_DISABLE \
- SS_ONSTACK mcontext_t pid_t sig_atomic_t sigevent siginfo_t sigset_t \
- sigstack sigval stack_t ucontext_t
-# generated via this:
-# perl -lne '/^#ifdef (SIG\w+)/ and print $1' lib/sig2str.c|sort -u|fmt -70
-_sig_names = \
- SIGABRT SIGALRM SIGALRM1 SIGBUS SIGCANCEL SIGCHLD SIGCLD SIGCONT \
- SIGDANGER SIGDIL SIGEMT SIGFPE SIGFREEZE SIGGRANT SIGHUP SIGILL \
- SIGINFO SIGINT SIGIO SIGIOT SIGKAP SIGKILL SIGKILLTHR SIGLOST SIGLWP \
- SIGMIGRATE SIGMSG SIGPHONE SIGPIPE SIGPOLL SIGPRE SIGPROF SIGPWR \
- SIGQUIT SIGRETRACT SIGSAK SIGSEGV SIGSOUND SIGSTKFLT SIGSTOP SIGSYS \
- SIGTERM SIGTHAW SIGTRAP SIGTSTP SIGTTIN SIGTTOU SIGURG SIGUSR1 \
- SIGUSR2 SIGVIRT SIGVTALRM SIGWAITING SIGWINCH SIGWIND SIGWINDOW \
- SIGXCPU SIGXFSZ
-_sig_syms_re = $(subst $(_sp),|,$(strip $(_sig_names) $(_sig_types_and_consts)))
-
-# Prohibit the inclusion of signal.h without an actual use.
-sc_prohibit_signal_without_use:
- @h='signal.h' \
- re='\<($(_sig_function_re)) *\(|\<($(_sig_syms_re))\>' \
- $(_sc_header_without_use)
-
-# Don't include stdio--.h unless you use one of its functions.
-sc_prohibit_stdio--_without_use:
- @h='stdio--.h' re='\<((f(re)?|p)open|tmpfile) *\(' \
- $(_sc_header_without_use)
-
-# Don't include stdio-safer.h unless you use one of its functions.
-sc_prohibit_stdio-safer_without_use:
- @h='stdio-safer.h' re='\<((f(re)?|p)open|tmpfile)_safer *\(' \
- $(_sc_header_without_use)
-
-# Prohibit the inclusion of strings.h without a sensible use.
-# Using the likes of bcmp, bcopy, bzero, index or rindex is not sensible.
-sc_prohibit_strings_without_use:
- @h='strings.h' \
- re='\<(strn?casecmp|ffs(ll)?)\>' \
- $(_sc_header_without_use)
-
-# Get the list of symbol names with this:
-# perl -lne '/^# *define ([A-Z]\w+)\(/ and print $1' lib/intprops.h|fmt
-_intprops_names = \
- TYPE_IS_INTEGER TYPE_TWOS_COMPLEMENT TYPE_ONES_COMPLEMENT \
- TYPE_SIGNED_MAGNITUDE TYPE_SIGNED TYPE_MINIMUM TYPE_MAXIMUM \
- INT_BITS_STRLEN_BOUND INT_STRLEN_BOUND INT_BUFSIZE_BOUND \
- INT_ADD_RANGE_OVERFLOW INT_SUBTRACT_RANGE_OVERFLOW \
- INT_NEGATE_RANGE_OVERFLOW INT_MULTIPLY_RANGE_OVERFLOW \
- INT_DIVIDE_RANGE_OVERFLOW INT_REMAINDER_RANGE_OVERFLOW \
- INT_LEFT_SHIFT_RANGE_OVERFLOW INT_ADD_OVERFLOW INT_SUBTRACT_OVERFLOW \
- INT_NEGATE_OVERFLOW INT_MULTIPLY_OVERFLOW INT_DIVIDE_OVERFLOW \
- INT_REMAINDER_OVERFLOW INT_LEFT_SHIFT_OVERFLOW
-_intprops_syms_re = $(subst $(_sp),|,$(strip $(_intprops_names)))
-# Prohibit the inclusion of intprops.h without an actual use.
-sc_prohibit_intprops_without_use:
- @h='intprops.h' \
- re='\<($(_intprops_syms_re)) *\(' \
- $(_sc_header_without_use)
-
-_stddef_syms_re = NULL|offsetof|ptrdiff_t|size_t|wchar_t
-# Prohibit the inclusion of stddef.h without an actual use.
-sc_prohibit_stddef_without_use:
- @h='stddef.h' \
- re='\<($(_stddef_syms_re))\>' \
- $(_sc_header_without_use)
-
-_de1 = dirfd|(close|(fd)?open|read|rewind|seek|tell)dir(64)?(_r)?
-_de2 = (versionsort|struct dirent|getdirentries|alphasort|scandir(at)?)(64)?
-_de3 = MAXNAMLEN|DIR|ino_t|d_ino|d_fileno|d_namlen
-_dirent_syms_re = $(_de1)|$(_de2)|$(_de3)
-# Prohibit the inclusion of dirent.h without an actual use.
-sc_prohibit_dirent_without_use:
- @h='dirent.h' \
- re='\<($(_dirent_syms_re))\>' \
- $(_sc_header_without_use)
-
-# Prohibit the inclusion of verify.h without an actual use.
-sc_prohibit_verify_without_use:
- @h='verify.h' \
- re='\<(verify(true|expr)?|static_assert) *\(' \
- $(_sc_header_without_use)
-
-# Don't include xfreopen.h unless you use one of its functions.
-sc_prohibit_xfreopen_without_use:
- @h='xfreopen.h' re='\<xfreopen *\(' $(_sc_header_without_use)
-
-sc_obsolete_symbols:
- @prohibit='\<(HAVE''_FCNTL_H|O''_NDELAY)\>' \
- halt='do not use HAVE''_FCNTL_H or O'_NDELAY \
- $(_sc_search_regexp)
-
-# FIXME: warn about definitions of EXIT_FAILURE, EXIT_SUCCESS, STREQ
-
-# Each nonempty ChangeLog line must start with a year number, or a TAB.
-sc_changelog:
- @prohibit='^[^12 ]' \
- in_vc_files='^ChangeLog$$' \
- halt='found unexpected prefix in a ChangeLog' \
- $(_sc_search_regexp)
-
-# Ensure that each .c file containing a "main" function also
-# calls set_program_name.
-sc_program_name:
- @require='set_program_name *\(m?argv\[0\]\);' \
- in_vc_files='\.c$$' \
- containing='\<main *(' \
- halt='the above files do not call set_program_name' \
- $(_sc_search_regexp)
-
-# Ensure that each .c file containing a "main" function also
-# calls bindtextdomain.
-sc_bindtextdomain:
- @require='bindtextdomain *\(' \
- in_vc_files='\.c$$' \
- containing='\<main *(' \
- halt='the above files do not call bindtextdomain' \
- $(_sc_search_regexp)
-
-# Require that the final line of each test-lib.sh-using test be this one:
-# Exit $fail
-# Note: this test requires GNU grep's --label= option.
-Exit_witness_file ?= tests/test-lib.sh
-Exit_base := $(notdir $(Exit_witness_file))
-sc_require_test_exit_idiom:
- @if test -f $(srcdir)/$(Exit_witness_file); then \
- die=0; \
- for i in $$(grep -l -F 'srcdir/$(Exit_base)' \
- $$($(VC_LIST) tests)); do \
- tail -n1 $$i | grep '^Exit .' > /dev/null \
- && : || { die=1; echo $$i; } \
- done; \
- test $$die = 1 && \
- { echo 1>&2 '$(ME): the final line in each of the above is not:'; \
- echo 1>&2 'Exit something'; \
- exit 1; } || :; \
- fi
-
-sc_trailing_blank:
- @prohibit='[ ]$$' \
- halt='found trailing blank(s)' \
- $(_sc_search_regexp)
-
-# Match lines like the following, but where there is only one space
-# between the options and the description:
-# -D, --all-repeated[=delimit-method] print all duplicate lines\n
-longopt_re = --[a-z][0-9A-Za-z-]*(\[?=[0-9A-Za-z-]*\]?)?
-sc_two_space_separator_in_usage:
- @prohibit='^ *(-[A-Za-z],)? $(longopt_re) [^ ].*\\$$' \
- halt='help2man requires at least two spaces between an option and its description'\
- $(_sc_search_regexp)
-
-# A regexp matching function names like "error" that may be used
-# to emit translatable messages.
-_gl_translatable_diag_func_re ?= error
-
-# Look for diagnostics that aren't marked for translation.
-# This won't find any for which error's format string is on a separate line.
-sc_unmarked_diagnostics:
- @prohibit='\<$(_gl_translatable_diag_func_re) *\([^"]*"[^"]*[a-z]{3}' \
- exclude='(_|ngettext ?)\(' \
- halt='$(ME): found unmarked diagnostic(s)' \
- $(_sc_search_regexp)
-
-# Avoid useless parentheses like those in this example:
-# #if defined (SYMBOL) || defined (SYM2)
-sc_useless_cpp_parens:
- @prohibit='^# *if .*defined *\(' \
- halt='found useless parentheses in cpp directive' \
- $(_sc_search_regexp)
-
-# List headers for which HAVE_HEADER_H is always true, assuming you are
-# using the appropriate gnulib module. CAUTION: for each "unnecessary"
-# #if HAVE_HEADER_H that you remove, be sure that your project explicitly
-# requires the gnulib module that guarantees the usability of that header.
-gl_assured_headers_ = \
- cd $(gnulib_dir)/lib && echo *.in.h|sed 's/\.in\.h//g'
-
-# Convert the list of names to upper case, and replace each space with "|".
-az_ = abcdefghijklmnopqrstuvwxyz
-AZ_ = ABCDEFGHIJKLMNOPQRSTUVWXYZ
-gl_header_upper_case_or_ = \
- $$($(gl_assured_headers_) \
- | tr $(az_)/.- $(AZ_)___ \
- | tr -s ' ' '|' \
- )
-sc_prohibit_always_true_header_tests:
- @or=$(gl_header_upper_case_or_); \
- re="HAVE_($$or)_H"; \
- prohibit='\<'"$$re"'\>' \
- halt=$$(printf '%s\n' \
- 'do not test the above HAVE_<header>_H symbol(s);' \
- ' with the corresponding gnulib module, they are always true') \
- $(_sc_search_regexp)
-
-# ==================================================================
-gl_other_headers_ ?= \
- intprops.h \
- openat.h \
- stat-macros.h
-
-# Perl -lne code to extract "significant" cpp-defined symbols from a
-# gnulib header file, eliminating a few common false-positives.
-# The exempted names below are defined only conditionally in gnulib,
-# and hence sometimes must/may be defined in application code.
-gl_extract_significant_defines_ = \
- /^\# *define ([^_ (][^ (]*)(\s*\(|\s+\w+)/\
- && $$2 !~ /(?:rpl_|_used_without_)/\
- && $$1 !~ /^(?:NSIG|ENODATA)$$/\
- && $$1 !~ /^(?:SA_RESETHAND|SA_RESTART)$$/\
- and print $$1
-
-# Create a list of regular expressions matching the names
-# of macros that are guaranteed to be defined by parts of gnulib.
-define def_sym_regex
- gen_h=$(gl_generated_headers_); \
- (cd $(gnulib_dir)/lib; \
- for f in *.in.h $(gl_other_headers_); do \
- test -f $$f \
- && perl -lne '$(gl_extract_significant_defines_)' $$f; \
- done; \
- ) | sort -u \
- | sed 's/^/^ *# *(define|undef) */;s/$$/\\>/'
-endef
-
-# Don't define macros that we already get from gnulib header files.
-sc_prohibit_always-defined_macros:
- @if test -d $(gnulib_dir); then \
- case $$(echo all: | grep -l -f - Makefile) in Makefile);; *) \
- echo '$(ME): skipping $@: you lack GNU grep' 1>&2; exit 0;; \
- esac; \
- $(def_sym_regex) | grep -E -f - $$($(VC_LIST_EXCEPT)) \
- && { echo '$(ME): define the above via some gnulib .h file' \
- 1>&2; exit 1; } || :; \
- fi
-# ==================================================================
-
-# Prohibit checked in backup files.
-sc_prohibit_backup_files:
- @$(VC_LIST) | grep '~$$' && \
- { echo '$(ME): found version controlled backup file' 1>&2; \
- exit 1; } || :
-
-# Require the latest GPL.
-sc_GPL_version:
- @prohibit='either ''version [^3]' \
- halt='GPL vN, N!=3' \
- $(_sc_search_regexp)
-
-# Require the latest GFDL. Two regexp, since some .texi files end up
-# line wrapping between 'Free Documentation License,' and 'Version'.
-_GFDL_regexp = (Free ''Documentation.*Version 1\.[^3]|Version 1\.[^3] or any)
-sc_GFDL_version:
- @prohibit='$(_GFDL_regexp)' \
- halt='GFDL vN, N!=3' \
- $(_sc_search_regexp)
-
-# Don't use Texinfo's @acronym{}.
-# http://lists.gnu.org/archive/html/bug-gnulib/2010-03/msg00321.html
-texinfo_suffix_re_ ?= \.(txi|texi(nfo)?)$$
-sc_texinfo_acronym:
- @prohibit='@acronym\{' \
- in_vc_files='$(texinfo_suffix_re_)' \
- halt='found use of Texinfo @acronym{}' \
- $(_sc_search_regexp)
-
-cvs_keywords = \
- Author|Date|Header|Id|Name|Locker|Log|RCSfile|Revision|Source|State
-
-sc_prohibit_cvs_keyword:
- @prohibit='\$$($(cvs_keywords))\$$' \
- halt='do not use CVS keyword expansion' \
- $(_sc_search_regexp)
-
-# This Perl code is slightly obfuscated. Not only is each "$" doubled
-# because it's in a Makefile, but the $$c's are comments; we cannot
-# use "#" due to the way the script ends up concatenated onto one line.
-# It would be much more concise, and would produce better output (including
-# counts) if written as:
-# perl -ln -0777 -e '/\n(\n+)$/ and print "$ARGV: ".length $1' ...
-# but that would be far less efficient, reading the entire contents
-# of each file, rather than just the last two bytes of each.
-# In addition, while the code below detects both blank lines and a missing
-# newline at EOF, the above detects only the former.
-#
-# This is a perl script that is expected to be the single-quoted argument
-# to a command-line "-le". The remaining arguments are file names.
-# Print the name of each file that does not end in exactly one newline byte.
-# I.e., warn if there are blank lines (2 or more newlines), or if the
-# last byte is not a newline. However, currently we don't complain
-# about any file that contains exactly one byte.
-# Exit nonzero if at least one such file is found, otherwise, exit 0.
-# Warn about, but otherwise ignore open failure. Ignore seek/read failure.
-#
-# Use this if you want to remove trailing empty lines from selected files:
-# perl -pi -0777 -e 's/\n\n+$/\n/' files...
-#
-require_exactly_one_NL_at_EOF_ = \
- foreach my $$f (@ARGV) \
- { \
- open F, "<", $$f or (warn "failed to open $$f: $$!\n"), next; \
- my $$p = sysseek (F, -2, 2); \
- my $$c = "seek failure probably means file has < 2 bytes; ignore"; \
- my $$last_two_bytes; \
- defined $$p and $$p = sysread F, $$last_two_bytes, 2; \
- close F; \
- $$c = "ignore read failure"; \
- $$p && ($$last_two_bytes eq "\n\n" \
- || substr ($$last_two_bytes,1) ne "\n") \
- and (print $$f), $$fail=1; \
- } \
- END { exit defined $$fail }
-sc_prohibit_empty_lines_at_EOF:
- @perl -le '$(require_exactly_one_NL_at_EOF_)' $$($(VC_LIST_EXCEPT)) \
- || { echo '$(ME): empty line(s) or no newline at EOF' \
- 1>&2; exit 1; } || :
-
-# Make sure we don't use st_blocks. Use ST_NBLOCKS instead.
-# This is a bit of a kludge, since it prevents use of the string
-# even in comments, but for now it does the job with no false positives.
-sc_prohibit_stat_st_blocks:
- @prohibit='[.>]st_blocks' \
- halt='do not use st_blocks; use ST_NBLOCKS' \
- $(_sc_search_regexp)
-
-# Make sure we don't define any S_IS* macros in src/*.c files.
-# They're already defined via gnulib's sys/stat.h replacement.
-sc_prohibit_S_IS_definition:
- @prohibit='^ *# *define *S_IS' \
- halt='do not define S_IS* macros; include <sys/stat.h>' \
- $(_sc_search_regexp)
-
-# Perl block to convert a match to FILE_NAME:LINENO:TEST,
-# that is shared by two definitions below.
-perl_filename_lineno_text_ = \
- -e ' {' \
- -e ' $$n = ($$` =~ tr/\n/\n/ + 1);' \
- -e ' ($$v = $$&) =~ s/\n/\\n/g;' \
- -e ' print "$$ARGV:$$n:$$v\n";' \
- -e ' }'
-
-prohibit_doubled_word_RE_ ?= \
- /\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt]o)\s+\1\b/gims
-prohibit_doubled_word_ = \
- -e 'while ($(prohibit_doubled_word_RE_))' \
- $(perl_filename_lineno_text_)
-
-# Define this to a regular expression that matches
-# any filename:dd:match lines you want to ignore.
-# The default is to ignore no matches.
-ignore_doubled_word_match_RE_ ?= ^$$
-
-sc_prohibit_doubled_word:
- @perl -n -0777 $(prohibit_doubled_word_) $$($(VC_LIST_EXCEPT)) \
- | grep -vE '$(ignore_doubled_word_match_RE_)' \
- | grep . && { echo '$(ME): doubled words' 1>&2; exit 1; } || :
-
-# A regular expression matching undesirable combinations of words like
-# "can not"; this matches them even when the two words appear on different
-# lines, but not when there is an intervening delimiter like "#" or "*".
-# Similarly undesirable, "See @xref{...}", since an @xref should start
-# a sentence. Explicitly prohibit any prefix of "see" or "also".
-# Also prohibit a prefix matching "\w+ +".
-# @pxref gets the same see/also treatment and should be parenthesized;
-# presume it must *not* start a sentence.
-bad_xref_re_ ?= (?:[\w,:;] +|(?:see|also)\s+)\@xref\{
-bad_pxref_re_ ?= (?:[.!?]|(?:see|also))\s+\@pxref\{
-prohibit_undesirable_word_seq_RE_ ?= \
- /(?:\bcan\s+not\b|$(bad_xref_re_)|$(bad_pxref_re_))/gims
-prohibit_undesirable_word_seq_ = \
- -e 'while ($(prohibit_undesirable_word_seq_RE_))' \
- $(perl_filename_lineno_text_)
-# Define this to a regular expression that matches
-# any filename:dd:match lines you want to ignore.
-# The default is to ignore no matches.
-ignore_undesirable_word_sequence_RE_ ?= ^$$
-
-sc_prohibit_undesirable_word_seq:
- @perl -n -0777 $(prohibit_undesirable_word_seq_) \
- $$($(VC_LIST_EXCEPT)) \
- | grep -vE '$(ignore_undesirable_word_sequence_RE_)' | grep . \
- && { echo '$(ME): undesirable word sequence' >&2; exit 1; } || :
-
-_ptm1 = use "test C1 && test C2", not "test C1 -''a C2"
-_ptm2 = use "test C1 || test C2", not "test C1 -''o C2"
-# Using test's -a and -o operators is not portable.
-# We prefer test over [, since the latter is spelled [[ in configure.ac.
-sc_prohibit_test_minus_ao:
- @prohibit='(\<test| \[+) .+ -[ao] ' \
- halt='$(_ptm1); $(_ptm2)' \
- $(_sc_search_regexp)
-
-# Avoid a test bashism.
-sc_prohibit_test_double_equal:
- @prohibit='(\<test| \[+) .+ == ' \
- containing='#! */bin/[a-z]*sh' \
- halt='use "test x = x", not "test x =''= x"' \
- $(_sc_search_regexp)
-
-# Each program that uses proper_name_utf8 must link with one of the
-# ICONV libraries. Otherwise, some ICONV library must appear in LDADD.
-# The perl -0777 invocation below extracts the possibly-multi-line
-# definition of LDADD from the appropriate Makefile.am and exits 0
-# when it contains "ICONV".
-sc_proper_name_utf8_requires_ICONV:
- @progs=$$(grep -l 'proper_name_utf8 ''("' $$($(VC_LIST_EXCEPT)));\
- if test "x$$progs" != x; then \
- fail=0; \
- for p in $$progs; do \
- dir=$$(dirname "$$p"); \
- perl -0777 \
- -ne 'exit !(/^LDADD =(.+?[^\\]\n)/ms && $$1 =~ /ICONV/)' \
- $$dir/Makefile.am && continue; \
- base=$$(basename "$$p" .c); \
- grep "$${base}_LDADD.*ICONV)" $$dir/Makefile.am > /dev/null \
- || { fail=1; echo 1>&2 "$(ME): $$p uses proper_name_utf8"; }; \
- done; \
- test $$fail = 1 && \
- { echo 1>&2 '$(ME): the above do not link with any ICONV library'; \
- exit 1; } || :; \
- fi
-
-# Warn about "c0nst struct Foo const foo[]",
-# but not about "char const *const foo" or "#define const const".
-sc_redundant_const:
- @prohibit='\bconst\b[[:space:][:alnum:]]{2,}\bconst\b' \
- halt='redundant "const" in declarations' \
- $(_sc_search_regexp)
-
-sc_const_long_option:
- @prohibit='^ *static.*struct option ' \
- exclude='const struct option|struct option const' \
- halt='$(ME): add "const" to the above declarations' \
- $(_sc_search_regexp)
-
-NEWS_hash = \
- $$(sed -n '/^\*.* $(PREV_VERSION_REGEXP) ([0-9-]*)/,$$p' \
- $(srcdir)/NEWS \
- | perl -0777 -pe \
- 's/^Copyright.+?Free\sSoftware\sFoundation,\sInc\.\n//ms' \
- | md5sum - \
- | sed 's/ .*//')
-
-# Ensure that we don't accidentally insert an entry into an old NEWS block.
-sc_immutable_NEWS:
- @if test -f $(srcdir)/NEWS; then \
- test "$(NEWS_hash)" = '$(old_NEWS_hash)' && : || \
- { echo '$(ME): you have modified old NEWS' 1>&2; exit 1; }; \
- fi
-
-# Update the hash stored above. Do this after each release and
-# for any corrections to old entries.
-update-NEWS-hash: NEWS
- perl -pi -e 's/^(old_NEWS_hash[ \t]+:?=[ \t]+).*/$${1}'"$(NEWS_hash)/" \
- $(srcdir)/cfg.mk
-
-# Ensure that we use only the standard $(VAR) notation,
-# not @...@ in Makefile.am, now that we can rely on automake
-# to emit a definition for each substituted variable.
-# However, there is still one case in which @VAR@ use is not just
-# legitimate, but actually required: when augmenting an automake-defined
-# variable with a prefix. For example, gettext uses this:
-# MAKEINFO = env LANG= LC_MESSAGES= LC_ALL= LANGUAGE= @MAKEINFO@
-# otherwise, makeinfo would put German or French (current locale)
-# navigation hints in the otherwise-English documentation.
-#
-# Allow the package to add exceptions via a hook in cfg.mk;
-# for example, @PRAGMA_SYSTEM_HEADER@ can be permitted by
-# setting this to ' && !/PRAGMA_SYSTEM_HEADER/'.
-_makefile_at_at_check_exceptions ?=
-sc_makefile_at_at_check:
- @perl -ne '/\@\w+\@/' \
- -e ' && !/(\w+)\s+=.*\@\1\@$$/' \
- -e ''$(_makefile_at_at_check_exceptions) \
- -e 'and (print "$$ARGV:$$.: $$_"), $$m=1; END {exit !$$m}' \
- $$($(VC_LIST_EXCEPT) | grep -E '(^|/)(Makefile\.am|[^/]+\.mk)$$') \
- && { echo '$(ME): use $$(...), not @...@' 1>&2; exit 1; } || :
-
-news-check: NEWS
- if sed -n $(news-check-lines-spec)p $(srcdir)/NEWS \
- | grep -E $(news-check-regexp) >/dev/null; then \
- :; \
- else \
- echo 'NEWS: $$(news-check-regexp) failed to match' 1>&2; \
- exit 1; \
- fi
-
-sc_makefile_TAB_only_indentation:
- @prohibit='^ [ ]{8}' \
- in_vc_files='akefile|\.mk$$' \
- halt='found TAB-8-space indentation' \
- $(_sc_search_regexp)
-
-sc_m4_quote_check:
- @prohibit='(AC_DEFINE(_UNQUOTED)?|AC_DEFUN)\([^[]' \
- in_vc_files='(^configure\.ac|\.m4)$$' \
- halt='quote the first arg to AC_DEF*' \
- $(_sc_search_regexp)
-
-fix_po_file_diag = \
-'you have changed the set of files with translatable diagnostics;\n\
-apply the above patch\n'
-
-# Verify that all source files using _() are listed in po/POTFILES.in.
-po_file ?= $(srcdir)/po/POTFILES.in
-generated_files ?= $(srcdir)/lib/*.[ch]
-sc_po_check:
- @if test -f $(po_file); then \
- grep -E -v '^(#|$$)' $(po_file) \
- | grep -v '^src/false\.c$$' | sort > $@-1; \
- files=; \
- for file in $$($(VC_LIST_EXCEPT)) $(generated_files); do \
- test -r $$file || continue; \
- case $$file in \
- *.m4|*.mk) continue ;; \
- *.?|*.??) ;; \
- *) continue;; \
- esac; \
- case $$file in \
- *.[ch]) \
- base=`expr " $$file" : ' \(.*\)\..'`; \
- { test -f $$base.l || test -f $$base.y; } && continue;; \
- esac; \
- files="$$files $$file"; \
- done; \
- grep -E -l '\b(N?_|gettext *)\([^)"]*("|$$)' $$files \
- | sed 's|^$(_dot_escaped_srcdir)/||' | sort -u > $@-2; \
- diff -u -L $(po_file) -L $(po_file) $@-1 $@-2 \
- || { printf '$(ME): '$(fix_po_file_diag) 1>&2; exit 1; }; \
- rm -f $@-1 $@-2; \
- fi
-
-# Sometimes it is useful to change the PATH environment variable
-# in Makefiles. When doing so, it's better not to use the Unix-centric
-# path separator of ':', but rather the automake-provided '$(PATH_SEPARATOR)'.
-msg = '$(ME): Do not use ":" above; use $$(PATH_SEPARATOR) instead'
-sc_makefile_path_separator_check:
- @prohibit='PATH[=].*:' \
- in_vc_files='akefile|\.mk$$' \
- halt=$(msg) \
- $(_sc_search_regexp)
-
-# Check that 'make alpha' will not fail at the end of the process,
-# i.e., when pkg-M.N.tar.xz already exists (either in "." or in ../release)
-# and is read-only.
-writable-files:
- if test -d $(release_archive_dir); then \
- for file in $(DIST_ARCHIVES); do \
- for p in ./ $(release_archive_dir)/; do \
- test -e $$p$$file || continue; \
- test -w $$p$$file \
- || { echo ERROR: $$p$$file is not writable; fail=1; }; \
- done; \
- done; \
- test "$$fail" && exit 1 || : ; \
- else :; \
- fi
-
-v_etc_file = $(gnulib_dir)/lib/version-etc.c
-sample-test = tests/sample-test
-texi = doc/$(PACKAGE).texi
-# Make sure that the copyright date in $(v_etc_file) is up to date.
-# Do the same for the $(sample-test) and the main doc/.texi file.
-sc_copyright_check:
- @require='enum { COPYRIGHT_YEAR = '$$(date +%Y)' };' \
- in_files=$(v_etc_file) \
- halt='out of date copyright in $(v_etc_file); update it' \
- $(_sc_search_regexp)
- @require='# Copyright \(C\) '$$(date +%Y)' Free' \
- in_vc_files=$(sample-test) \
- halt='out of date copyright in $(sample-test); update it' \
- $(_sc_search_regexp)
- @require='Copyright @copyright\{\} .*'$$(date +%Y)' Free' \
- in_vc_files=$(texi) \
- halt='out of date copyright in $(texi); update it' \
- $(_sc_search_regexp)
-
-# If tests/help-version exists and seems to be new enough, assume that its
-# use of init.sh and path_prepend_ is correct, and ensure that every other
-# use of init.sh is identical.
-# This is useful because help-version cross-checks prog --version
-# with $(VERSION), which verifies that its path_prepend_ invocation
-# sets PATH correctly. This is an inexpensive way to ensure that
-# the other init.sh-using tests also get it right.
-_hv_file ?= $(srcdir)/tests/help-version
-_hv_regex_weak ?= ^ *\. .*/init\.sh"
-# Fix syntax-highlighters "
-_hv_regex_strong ?= ^ *\. "\$${srcdir=\.}/init\.sh"
-sc_cross_check_PATH_usage_in_tests:
- @if test -f $(_hv_file); then \
- grep -l 'VERSION mismatch' $(_hv_file) >/dev/null \
- || { echo "$@: skipped: no such file: $(_hv_file)" 1>&2; \
- exit 0; }; \
- grep -lE '$(_hv_regex_strong)' $(_hv_file) >/dev/null \
- || { echo "$@: $(_hv_file) lacks conforming use of init.sh" 1>&2; \
- exit 1; }; \
- good=$$(grep -E '$(_hv_regex_strong)' $(_hv_file)); \
- grep -LFx "$$good" \
- $$(grep -lE '$(_hv_regex_weak)' $$($(VC_LIST_EXCEPT))) \
- | grep . && \
- { echo "$(ME): the above files use path_prepend_ inconsistently" \
- 1>&2; exit 1; } || :; \
- fi
-
-# BRE regex of file contents to identify a test script.
-_test_script_regex ?= \<init\.sh\>
-
-# In tests, use "compare expected actual", not the reverse.
-sc_prohibit_reversed_compare_failure:
- @prohibit='\<compare [^ ]+ ([^ ]*exp|/dev/null)' \
- containing='$(_test_script_regex)' \
- halt='reversed compare arguments' \
- $(_sc_search_regexp)
-
-# #if HAVE_... will evaluate to false for any non numeric string.
-# That would be flagged by using -Wundef, however gnulib currently
-# tests many undefined macros, and so we can't enable that option.
-# So at least preclude common boolean strings as macro values.
-sc_Wundef_boolean:
- @prohibit='^#define.*(yes|no|true|false)$$' \
- in_files='$(CONFIG_INCLUDE)' \
- halt='Use 0 or 1 for macro values' \
- $(_sc_search_regexp)
-
-# Even if you use pathmax.h to guarantee that PATH_MAX is defined, it might
-# not be constant, or might overflow a stack. In general, use PATH_MAX as
-# a limit, not an array or alloca size.
-sc_prohibit_path_max_allocation:
- @prohibit='(\balloca *\([^)]*|\[[^]]*)PATH_MAX' \
- halt='Avoid stack allocations of size PATH_MAX' \
- $(_sc_search_regexp)
-
-sc_vulnerable_makefile_CVE-2009-4029:
- @prohibit='perm -777 -exec chmod a\+rwx|chmod 777 \$$\(distdir\)' \
- in_files=$$(find $(srcdir) -name Makefile.in) \
- halt=$$(printf '%s\n' \
- 'the above files are vulnerable; beware of running' \
- ' "make dist*" rules, and upgrade to fixed automake' \
- ' see http://bugzilla.redhat.com/542609 for details') \
- $(_sc_search_regexp)
-
-vc-diff-check:
- (unset CDPATH; cd $(srcdir) && $(VC) diff) > vc-diffs || :
- if test -s vc-diffs; then \
- cat vc-diffs; \
- echo "Some files are locally modified:" 1>&2; \
- exit 1; \
- else \
- rm vc-diffs; \
- fi
-
-rel-files = $(DIST_ARCHIVES)
-
-gnulib_dir ?= $(srcdir)/gnulib
-gnulib-version = $$(cd $(gnulib_dir) && git describe)
-bootstrap-tools ?= autoconf,automake,gnulib
-
-# If it's not already specified, derive the GPG key ID from
-# the signed tag we've just applied to mark this release.
-gpg_key_ID ?= \
- $$(git cat-file tag v$(VERSION) \
- | gpgv --status-fd 1 --keyring /dev/null - - 2>/dev/null \
- | sed -n '/^\[GNUPG:\] ERRSIG /{s///;s/ .*//p;q}')
-
-translation_project_ ?= coordinator@translationproject.org
-
-# Make info-gnu the default only for a stable release.
-ifeq ($(RELEASE_TYPE),stable)
- announcement_Cc_ ?= $(translation_project_), $(PACKAGE_BUGREPORT)
- announcement_mail_headers_ ?= \
- To: info-gnu@gnu.org \
- Cc: $(announcement_Cc_) \
- Mail-Followup-To: $(PACKAGE_BUGREPORT)
-else
- announcement_Cc_ ?= $(translation_project_)
- announcement_mail_headers_ ?= \
- To: $(PACKAGE_BUGREPORT) \
- Cc: $(announcement_Cc_)
-endif
-
-announcement: NEWS ChangeLog $(rel-files)
- @$(srcdir)/$(_build-aux)/announce-gen \
- --mail-headers='$(announcement_mail_headers_)' \
- --release-type=$(RELEASE_TYPE) \
- --package=$(PACKAGE) \
- --prev=$(PREV_VERSION) \
- --curr=$(VERSION) \
- --gpg-key-id=$(gpg_key_ID) \
- --news=$(srcdir)/NEWS \
- --bootstrap-tools=$(bootstrap-tools) \
- $$(case ,$(bootstrap-tools), in (*,gnulib,*) \
- echo --gnulib-version=$(gnulib-version);; esac) \
- --no-print-checksums \
- $(addprefix --url-dir=, $(url_dir_list))
-
-## ---------------- ##
-## Updating files. ##
-## ---------------- ##
-
-ftp-gnu = ftp://ftp.gnu.org/gnu
-www-gnu = http://www.gnu.org
-
-upload_dest_dir_ ?= $(PACKAGE)
-emit_upload_commands:
- @echo =====================================
- @echo =====================================
- @echo "$(srcdir)/$(_build-aux)/gnupload $(GNUPLOADFLAGS) \\"
- @echo " --to $(gnu_rel_host):$(upload_dest_dir_) \\"
- @echo " $(rel-files)"
- @echo '# send the ~/announce-$(my_distdir) e-mail'
- @echo =====================================
- @echo =====================================
-
-define emit-commit-log
- printf '%s\n' 'maint: post-release administrivia' '' \
- '* NEWS: Add header line for next release.' \
- '* .prev-version: Record previous version.' \
- '* cfg.mk (old_NEWS_hash): Auto-update.'
-endef
-
-.PHONY: no-submodule-changes
-no-submodule-changes:
- if test -d $(srcdir)/.git; then \
- diff=$$(cd $(srcdir) && git submodule -q foreach \
- git diff-index --name-only HEAD) \
- || exit 1; \
- case $$diff in '') ;; \
- *) echo '$(ME): submodule files are locally modified:'; \
- echo "$$diff"; exit 1;; esac; \
- else \
- : ; \
- fi
-
-submodule-checks ?= no-submodule-changes public-submodule-commit
-
-# Ensure that each sub-module commit we're using is public.
-# Without this, it is too easy to tag and release code that
-# cannot be built from a fresh clone.
-.PHONY: public-submodule-commit
-public-submodule-commit:
- $(AM_V_GEN)if test -d $(srcdir)/.git; then \
- cd $(srcdir) && \
- git submodule --quiet foreach test '$$(git rev-parse $$sha1)' \
- = '$$(git merge-base origin $$sha1)' \
- || { echo '$(ME): found non-public submodule commit' >&2; \
- exit 1; }; \
- else \
- : ; \
- fi
-# This rule has a high enough utility/cost ratio that it should be a
-# dependent of "check" by default. However, some of us do occasionally
-# commit a temporary change that deliberately points to a non-public
-# submodule commit, and want to be able to use rules like "make check".
-# In that case, run e.g., "make check gl_public_submodule_commit="
-# to disable this test.
-gl_public_submodule_commit ?= public-submodule-commit
-check: $(gl_public_submodule_commit)
-
-.PHONY: alpha beta stable
-ALL_RECURSIVE_TARGETS += alpha beta stable
-alpha beta stable: $(local-check) writable-files $(submodule-checks)
- test $@ = stable \
- && { echo $(VERSION) | grep -E '^[0-9]+(\.[0-9]+)+$$' \
- || { echo "invalid version string: $(VERSION)" 1>&2; exit 1;};}\
- || :
- $(MAKE) vc-diff-check
- $(MAKE) news-check
- $(MAKE) distcheck
- $(MAKE) dist
- $(MAKE) $(release-prep-hook) RELEASE_TYPE=$@
- $(MAKE) -s emit_upload_commands RELEASE_TYPE=$@
-
-# Override this in cfg.mk if you follow different procedures.
-release-prep-hook ?= release-prep
-
-gl_noteworthy_news_ = * Noteworthy changes in release ?.? (????-??-??) [?]
-.PHONY: release-prep
-release-prep:
- case $$RELEASE_TYPE in alpha|beta|stable) ;; \
- *) echo "invalid RELEASE_TYPE: $$RELEASE_TYPE" 1>&2; exit 1;; esac
- $(MAKE) --no-print-directory -s announcement > ~/announce-$(my_distdir)
- if test -d $(release_archive_dir); then \
- ln $(rel-files) $(release_archive_dir); \
- chmod a-w $(rel-files); \
- fi
- echo $(VERSION) > $(prev_version_file)
- $(MAKE) update-NEWS-hash
- perl -pi -e '$$. == 3 and print "$(gl_noteworthy_news_)\n\n\n"' NEWS
- $(emit-commit-log) > .ci-msg
- $(VC) commit -F .ci-msg -a
- rm .ci-msg
-
-# Override this with e.g., -s $(srcdir)/some_other_name.texi
-# if the default $(PACKAGE)-derived name doesn't apply.
-gendocs_options_ ?=
-
-.PHONY: web-manual
-web-manual:
- @test -z "$(manual_title)" \
- && { echo define manual_title in cfg.mk 1>&2; exit 1; } || :
- @cd '$(srcdir)/doc'; \
- $(SHELL) ../$(_build-aux)/gendocs.sh $(gendocs_options_) \
- -o '$(abs_builddir)/doc/manual' \
- --email $(PACKAGE_BUGREPORT) $(PACKAGE) \
- "$(PACKAGE_NAME) - $(manual_title)"
- @echo " *** Upload the doc/manual directory to web-cvs."
-
-# Code Coverage
-
-init-coverage:
- $(MAKE) $(AM_MAKEFLAGS) clean
- lcov --directory . --zerocounters
-
-COVERAGE_CCOPTS ?= "-g --coverage"
-COVERAGE_OUT ?= doc/coverage
-
-build-coverage:
- $(MAKE) $(AM_MAKEFLAGS) CFLAGS=$(COVERAGE_CCOPTS) CXXFLAGS=$(COVERAGE_CCOPTS)
- $(MAKE) $(AM_MAKEFLAGS) CFLAGS=$(COVERAGE_CCOPTS) CXXFLAGS=$(COVERAGE_CCOPTS) check
- mkdir -p $(COVERAGE_OUT)
- lcov --directory . --output-file $(COVERAGE_OUT)/$(PACKAGE).info \
- --capture
-
-gen-coverage:
- genhtml --output-directory $(COVERAGE_OUT) \
- $(COVERAGE_OUT)/$(PACKAGE).info \
- --highlight --frames --legend \
- --title "$(PACKAGE_NAME)"
-
-coverage: init-coverage build-coverage gen-coverage
-
-# Update gettext files.
-PACKAGE ?= $(shell basename $(PWD))
-PO_DOMAIN ?= $(PACKAGE)
-POURL = http://translationproject.org/latest/$(PO_DOMAIN)/
-PODIR ?= po
-refresh-po:
- rm -f $(PODIR)/*.po && \
- echo "$(ME): getting translations into po (please ignore the robots.txt ERROR 404)..." && \
- wget --no-verbose --directory-prefix $(PODIR) --no-directories --recursive --level 1 --accept .po --accept .po.1 $(POURL) && \
- echo 'en@boldquot' > $(PODIR)/LINGUAS && \
- echo 'en@quot' >> $(PODIR)/LINGUAS && \
- ls $(PODIR)/*.po | sed 's/\.po//' | sed 's,$(PODIR)/,,' | sort >> $(PODIR)/LINGUAS
-
- # Running indent once is not idempotent, but running it twice is.
-INDENT_SOURCES ?= $(C_SOURCES)
-.PHONY: indent
-indent:
- indent $(INDENT_SOURCES)
- indent $(INDENT_SOURCES)
-
-# If you want to set UPDATE_COPYRIGHT_* environment variables,
-# put the assignments in this variable.
-update-copyright-env ?=
-
-# Run this rule once per year (usually early in January)
-# to update all FSF copyright year lists in your project.
-# If you have an additional project-specific rule,
-# add it in cfg.mk along with a line 'update-copyright: prereq'.
-# By default, exclude all variants of COPYING; you can also
-# add exemptions (such as ChangeLog..* for rotated change logs)
-# in the file .x-update-copyright.
-.PHONY: update-copyright
-update-copyright:
- grep -l -w Copyright \
- $$(export VC_LIST_EXCEPT_DEFAULT=COPYING && $(VC_LIST_EXCEPT)) \
- | $(update-copyright-env) xargs $(srcdir)/$(_build-aux)/$@
-
-# This tight_scope test is skipped with a warning if $(_gl_TS_headers) is not
-# overridden and $(_gl_TS_dir)/Makefile.am does not mention noinst_HEADERS.
-
-# NOTE: to override any _gl_TS_* default value, you must
-# define the variable(s) using "export" in cfg.mk.
-_gl_TS_dir ?= src
-
-ALL_RECURSIVE_TARGETS += sc_tight_scope
-sc_tight_scope: tight-scope.mk
- @fail=0; \
- if ! grep '^ *export _gl_TS_headers *=' $(srcdir)/cfg.mk \
- > /dev/null \
- && ! grep -w noinst_HEADERS $(srcdir)/$(_gl_TS_dir)/Makefile.am \
- > /dev/null 2>&1; then \
- echo '$(ME): skipping $@'; \
- else \
- $(MAKE) -s -C $(_gl_TS_dir) \
- -f Makefile \
- -f $(abs_top_srcdir)/cfg.mk \
- -f $(abs_top_builddir)/$< \
- _gl_tight_scope \
- || fail=1; \
- fi; \
- rm -f $<; \
- exit $$fail
-
-tight-scope.mk: $(ME)
- @rm -f $@ $@-t
- @perl -ne '/^# TS-start/.../^# TS-end/ and print' $(srcdir)/$(ME) > $@-t
- @chmod a=r $@-t && mv $@-t $@
-
-ifeq (a,b)
-# TS-start
-
-# Most functions should have static scope.
-# Any that don't must be marked with 'extern', but 'main'
-# and 'usage' are exceptions: they're always extern, but
-# do not need to be marked. Symbols matching '__.*' are
-# reserved by the compiler, so are automatically excluded below.
-_gl_TS_unmarked_extern_functions ?= main usage
-_gl_TS_function_match ?= /^(?:$(_gl_TS_extern)) +.*?(\S+) *\(/
-
-# If your project uses a macro like "XTERN", then put
-# the following in cfg.mk to override this default:
-# export _gl_TS_extern = extern|XTERN
-_gl_TS_extern ?= extern
-
-# The second nm|grep checks for file-scope variables with 'extern' scope.
-# Without gnulib's progname module, you might put program_name here.
-# Symbols matching '__.*' are reserved by the compiler,
-# so are automatically excluded below.
-_gl_TS_unmarked_extern_vars ?=
-
-# NOTE: the _match variables are perl expressions -- not mere regular
-# expressions -- so that you can extend them to match other patterns
-# and easily extract matched variable names.
-# For example, if your project declares some global variables via
-# a macro like this: GLOBAL(type, var_name, initializer), then you
-# can override this definition to automatically extract those names:
-# export _gl_TS_var_match = \
-# /^(?:$(_gl_TS_extern)) .*?\**(\w+)(\[.*?\])?;/ || /\bGLOBAL\(.*?,\s*(.*?),/
-_gl_TS_var_match ?= /^(?:$(_gl_TS_extern)) .*?(\w+)(\[.*?\])?;/
-
-# The names of object files in (or relative to) $(_gl_TS_dir).
-_gl_TS_obj_files ?= *.$(OBJEXT)
-
-# Files in which to search for the one-line style extern declarations.
-# $(_gl_TS_dir)-relative.
-_gl_TS_headers ?= $(noinst_HEADERS)
-
-.PHONY: _gl_tight_scope
-_gl_tight_scope: $(bin_PROGRAMS)
- t=exceptions-$$$$; \
- trap 's=$$?; rm -f $$t; exit $$s' 0; \
- for sig in 1 2 3 13 15; do \
- eval "trap 'v=`expr $$sig + 128`; (exit $$v); exit $$v' $$sig"; \
- done; \
- src=`for f in $(SOURCES); do \
- test -f $$f && d= || d=$(srcdir)/; echo $$d$$f; done`; \
- hdr=`for f in $(_gl_TS_headers); do \
- test -f $$f && d= || d=$(srcdir)/; echo $$d$$f; done`; \
- ( printf '^%s$$\n' '__.*' $(_gl_TS_unmarked_extern_functions); \
- grep -h -A1 '^extern .*[^;]$$' $$src \
- | grep -vE '^(extern |--)' | sed 's/ .*//'; \
- perl -lne \
- '$(_gl_TS_function_match) and print "^$$1\$$"' $$hdr; \
- ) | sort -u > $$t; \
- nm -e $(_gl_TS_obj_files) | sed -n 's/.* T //p'|grep -Ev -f $$t \
- && { echo the above functions should have static scope >&2; \
- exit 1; } || : ; \
- ( printf '^%s$$\n' '__.*' $(_gl_TS_unmarked_extern_vars); \
- perl -lne '$(_gl_TS_var_match) and print "^$$1\$$"' $$hdr *.h \
- ) | sort -u > $$t; \
- nm -e $(_gl_TS_obj_files) | sed -n 's/.* [BCDGRS] //p' \
- | sort -u | grep -Ev -f $$t \
- && { echo the above variables should have static scope >&2; \
- exit 1; } || :
-# TS-end
-endif
+++ /dev/null
-2006-09-02 Karl Berry <karl@gnu.org>
-
- * Makefile.am (hello.1): downcase description.
-
-2006-08-22 Karl Berry <karl@gnu.org>
-
- * Makefile.am (hello.1): use -o, to help `missing'.
- From Ralf Wildenhues.
-
-2006-05-03 Karl Berry <karl@gnu.org>
-
- * Makefile.am (hello.1): no, can't use $(srcdir)/help2man, because
- it ends up being "./bin/sh help2man".
-
-2006-04-22 Karl Berry <karl@gnu.org>
-
- * Makefile.am (hello.1): find help2man in $(srcdir), for when
- srcdir!=builddir.
-
-2004-05-14 Karl Eichwalder <ke@gnu.franken.de>
-
- * Makefile.am (hello.1): Missing Perl at installation time is not
- fatal.
-
-2002-07-20 Karl Eichwalder <keichwa@gmx.net>
-
- * Makefile.am (CLEANFILES): New variable, add $(man_MANS).
-
-2002-07-20 Karl Eichwalder <keichwa@gmx.net>
-
- * Makefile.am (hello.1): Add $(srcdir)/; thus perl will find
- $(HELP2MAN) compilations takes place outside the source tree.
-
-2002-01-25 Karl Eichwalder <keichwa@gmx.net>
-
- * Makefile.am (hello.1): Use ../src/hello instead of $< for
- compatibility.
- Reported by Bruno Haible.
-
-2002-01-19 Karl Eichwalder <keichwa@gmx.net>
-
- * help2man: Copy version 1.024 from gettext-0.11-pre5+;
- recommended by Bruno Haible.
-
-1999-10-03 Karl Eichwalder <ke@gnu.franken.de>
-
- * Makefile.am: Rewritten:
- (man_MANS): New variable, add hello.1.
- (HELP2MAN): Ditto, add help2man.
- (noinst_SCRIPTS): Ditto, add $(HELP2MAN).
- (EXTRA_DIST): Ditto, add $(man_MANS) $(noinst_SCRIPTS).
- (hello.1): New target.
-
-1999-08-21 Karl Eichwalder <ke@gnu.franken.de>
-
- * help2man: Add this file from the textutils package.
-
- * Makefile.am: New file; filled with template information from the
- textutils package.
-
-Copyright (C) 1999, 2002, 2004, 2006 Free Software Foundation, Inc.
-
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
+++ /dev/null
-# Makefile.am for hello/man.
-#
-# Copyright 2004, 2005, 2006, 2007, 2008, 2009, 2010
-# Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-man_MANS = hello.1
-EXTRA_DIST = $(man_MANS)
-MAINTAINERCLEANFILES = $(man_MANS)
-
-# The man pages depend on the --help strings and the version number.
-common_mandeps = $(top_srcdir)/configure.ac
-
-# Depend on the source, not the binary; we don't need to regenerate the
-# binary when any source file changes, only the main one.
-# Use -o so that the `missing' program can infer the output file.
-hello.1: $(top_srcdir)/src/hello.c $(common_mandeps)
- $(HELP2MAN) --name="friendly greeting program" ../src/hello -o $@
+++ /dev/null
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile.am for hello/man.
-#
-# Copyright 2004, 2005, 2006, 2007, 2008, 2009, 2010
-# Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = man
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
- $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \
- $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/configmake.m4 \
- $(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \
- $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-o.m4 \
- $(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/getopt.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/gnulib-common.m4 \
- $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \
- $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
- $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/locale-fr.m4 \
- $(top_srcdir)/m4/locale-ja.m4 $(top_srcdir)/m4/locale-zh.m4 \
- $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \
- $(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/msvc-inval.m4 \
- $(top_srcdir)/m4/msvc-nothrow.m4 $(top_srcdir)/m4/nls.m4 \
- $(top_srcdir)/m4/nocrash.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quotearg.m4 \
- $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdbool.m4 \
- $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
- $(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
- $(top_srcdir)/m4/sys_socket_h.m4 $(top_srcdir)/m4/unistd_h.m4 \
- $(top_srcdir)/m4/warn-on-use.m4 $(top_srcdir)/m4/wchar_h.m4 \
- $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype_h.m4 \
- $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-am__installdirs = "$(DESTDIR)$(man1dir)"
-NROFF = nroff
-MANS = $(man_MANS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-pkglibexecdir = @pkglibexecdir@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-ARFLAGS = @ARFLAGS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CONFIG_INCLUDE = @CONFIG_INCLUDE@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
-EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
-ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
-ENOLINK_VALUE = @ENOLINK_VALUE@
-EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
-EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
-ERRNO_H = @ERRNO_H@
-EXEEXT = @EXEEXT@
-GETOPT_H = @GETOPT_H@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GNULIB_ATOLL = @GNULIB_ATOLL@
-GNULIB_BTOWC = @GNULIB_BTOWC@
-GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
-GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
-GNULIB_CHDIR = @GNULIB_CHDIR@
-GNULIB_CHOWN = @GNULIB_CHOWN@
-GNULIB_CLOSE = @GNULIB_CLOSE@
-GNULIB_DUP = @GNULIB_DUP@
-GNULIB_DUP2 = @GNULIB_DUP2@
-GNULIB_DUP3 = @GNULIB_DUP3@
-GNULIB_ENVIRON = @GNULIB_ENVIRON@
-GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
-GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
-GNULIB_FCHDIR = @GNULIB_FCHDIR@
-GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
-GNULIB_FDATASYNC = @GNULIB_FDATASYNC@
-GNULIB_FFSL = @GNULIB_FFSL@
-GNULIB_FFSLL = @GNULIB_FFSLL@
-GNULIB_FSYNC = @GNULIB_FSYNC@
-GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
-GNULIB_GETCWD = @GNULIB_GETCWD@
-GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
-GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
-GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
-GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
-GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
-GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
-GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
-GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
-GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
-GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
-GNULIB_GL_UNISTD_H_GETOPT = @GNULIB_GL_UNISTD_H_GETOPT@
-GNULIB_GRANTPT = @GNULIB_GRANTPT@
-GNULIB_GROUP_MEMBER = @GNULIB_GROUP_MEMBER@
-GNULIB_ISATTY = @GNULIB_ISATTY@
-GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
-GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
-GNULIB_LCHOWN = @GNULIB_LCHOWN@
-GNULIB_LINK = @GNULIB_LINK@
-GNULIB_LINKAT = @GNULIB_LINKAT@
-GNULIB_LSEEK = @GNULIB_LSEEK@
-GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
-GNULIB_MBRLEN = @GNULIB_MBRLEN@
-GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
-GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
-GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
-GNULIB_MBSCHR = @GNULIB_MBSCHR@
-GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
-GNULIB_MBSINIT = @GNULIB_MBSINIT@
-GNULIB_MBSLEN = @GNULIB_MBSLEN@
-GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
-GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
-GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
-GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
-GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
-GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
-GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
-GNULIB_MBSSEP = @GNULIB_MBSSEP@
-GNULIB_MBSSPN = @GNULIB_MBSSPN@
-GNULIB_MBSSTR = @GNULIB_MBSSTR@
-GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
-GNULIB_MBTOWC = @GNULIB_MBTOWC@
-GNULIB_MEMCHR = @GNULIB_MEMCHR@
-GNULIB_MEMMEM = @GNULIB_MEMMEM@
-GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
-GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
-GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
-GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
-GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
-GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
-GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
-GNULIB_PIPE = @GNULIB_PIPE@
-GNULIB_PIPE2 = @GNULIB_PIPE2@
-GNULIB_POSIX_OPENPT = @GNULIB_POSIX_OPENPT@
-GNULIB_PREAD = @GNULIB_PREAD@
-GNULIB_PTSNAME = @GNULIB_PTSNAME@
-GNULIB_PTSNAME_R = @GNULIB_PTSNAME_R@
-GNULIB_PUTENV = @GNULIB_PUTENV@
-GNULIB_PWRITE = @GNULIB_PWRITE@
-GNULIB_RANDOM = @GNULIB_RANDOM@
-GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
-GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
-GNULIB_READ = @GNULIB_READ@
-GNULIB_READLINK = @GNULIB_READLINK@
-GNULIB_READLINKAT = @GNULIB_READLINKAT@
-GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
-GNULIB_REALPATH = @GNULIB_REALPATH@
-GNULIB_RMDIR = @GNULIB_RMDIR@
-GNULIB_RPMATCH = @GNULIB_RPMATCH@
-GNULIB_SETENV = @GNULIB_SETENV@
-GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
-GNULIB_SLEEP = @GNULIB_SLEEP@
-GNULIB_STPCPY = @GNULIB_STPCPY@
-GNULIB_STPNCPY = @GNULIB_STPNCPY@
-GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
-GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
-GNULIB_STRDUP = @GNULIB_STRDUP@
-GNULIB_STRERROR = @GNULIB_STRERROR@
-GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
-GNULIB_STRNCAT = @GNULIB_STRNCAT@
-GNULIB_STRNDUP = @GNULIB_STRNDUP@
-GNULIB_STRNLEN = @GNULIB_STRNLEN@
-GNULIB_STRPBRK = @GNULIB_STRPBRK@
-GNULIB_STRSEP = @GNULIB_STRSEP@
-GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
-GNULIB_STRSTR = @GNULIB_STRSTR@
-GNULIB_STRTOD = @GNULIB_STRTOD@
-GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
-GNULIB_STRTOLL = @GNULIB_STRTOLL@
-GNULIB_STRTOULL = @GNULIB_STRTOULL@
-GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
-GNULIB_SYMLINK = @GNULIB_SYMLINK@
-GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
-GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
-GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
-GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
-GNULIB_UNISTD_H_NONBLOCKING = @GNULIB_UNISTD_H_NONBLOCKING@
-GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
-GNULIB_UNLINK = @GNULIB_UNLINK@
-GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
-GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
-GNULIB_UNSETENV = @GNULIB_UNSETENV@
-GNULIB_USLEEP = @GNULIB_USLEEP@
-GNULIB_WCPCPY = @GNULIB_WCPCPY@
-GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
-GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
-GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
-GNULIB_WCSCAT = @GNULIB_WCSCAT@
-GNULIB_WCSCHR = @GNULIB_WCSCHR@
-GNULIB_WCSCMP = @GNULIB_WCSCMP@
-GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
-GNULIB_WCSCPY = @GNULIB_WCSCPY@
-GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
-GNULIB_WCSDUP = @GNULIB_WCSDUP@
-GNULIB_WCSLEN = @GNULIB_WCSLEN@
-GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
-GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
-GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
-GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
-GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
-GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
-GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
-GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
-GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
-GNULIB_WCSSPN = @GNULIB_WCSSPN@
-GNULIB_WCSSTR = @GNULIB_WCSSTR@
-GNULIB_WCSTOK = @GNULIB_WCSTOK@
-GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
-GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
-GNULIB_WCTOB = @GNULIB_WCTOB@
-GNULIB_WCTOMB = @GNULIB_WCTOMB@
-GNULIB_WCTRANS = @GNULIB_WCTRANS@
-GNULIB_WCTYPE = @GNULIB_WCTYPE@
-GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
-GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
-GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
-GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
-GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
-GNULIB_WMEMSET = @GNULIB_WMEMSET@
-GNULIB_WRITE = @GNULIB_WRITE@
-GNULIB__EXIT = @GNULIB__EXIT@
-GREP = @GREP@
-HAVE_ATOLL = @HAVE_ATOLL@
-HAVE_BTOWC = @HAVE_BTOWC@
-HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
-HAVE_CHOWN = @HAVE_CHOWN@
-HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
-HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
-HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
-HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
-HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
-HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
-HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
-HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
-HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
-HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
-HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
-HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
-HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
-HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
-HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
-HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
-HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
-HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
-HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
-HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
-HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
-HAVE_DUP2 = @HAVE_DUP2@
-HAVE_DUP3 = @HAVE_DUP3@
-HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
-HAVE_FACCESSAT = @HAVE_FACCESSAT@
-HAVE_FCHDIR = @HAVE_FCHDIR@
-HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
-HAVE_FDATASYNC = @HAVE_FDATASYNC@
-HAVE_FEATURES_H = @HAVE_FEATURES_H@
-HAVE_FFSL = @HAVE_FFSL@
-HAVE_FFSLL = @HAVE_FFSLL@
-HAVE_FSYNC = @HAVE_FSYNC@
-HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
-HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
-HAVE_GETGROUPS = @HAVE_GETGROUPS@
-HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
-HAVE_GETLOGIN = @HAVE_GETLOGIN@
-HAVE_GETOPT_H = @HAVE_GETOPT_H@
-HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
-HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
-HAVE_GRANTPT = @HAVE_GRANTPT@
-HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
-HAVE_ISWBLANK = @HAVE_ISWBLANK@
-HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
-HAVE_LCHOWN = @HAVE_LCHOWN@
-HAVE_LINK = @HAVE_LINK@
-HAVE_LINKAT = @HAVE_LINKAT@
-HAVE_MBRLEN = @HAVE_MBRLEN@
-HAVE_MBRTOWC = @HAVE_MBRTOWC@
-HAVE_MBSINIT = @HAVE_MBSINIT@
-HAVE_MBSLEN = @HAVE_MBSLEN@
-HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
-HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
-HAVE_MEMCHR = @HAVE_MEMCHR@
-HAVE_MEMPCPY = @HAVE_MEMPCPY@
-HAVE_MKDTEMP = @HAVE_MKDTEMP@
-HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
-HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
-HAVE_MKSTEMP = @HAVE_MKSTEMP@
-HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
-HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
-HAVE_OS_H = @HAVE_OS_H@
-HAVE_PIPE = @HAVE_PIPE@
-HAVE_PIPE2 = @HAVE_PIPE2@
-HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
-HAVE_PREAD = @HAVE_PREAD@
-HAVE_PTSNAME = @HAVE_PTSNAME@
-HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
-HAVE_PWRITE = @HAVE_PWRITE@
-HAVE_RANDOM = @HAVE_RANDOM@
-HAVE_RANDOM_H = @HAVE_RANDOM_H@
-HAVE_RANDOM_R = @HAVE_RANDOM_R@
-HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
-HAVE_READLINK = @HAVE_READLINK@
-HAVE_READLINKAT = @HAVE_READLINKAT@
-HAVE_REALPATH = @HAVE_REALPATH@
-HAVE_RPMATCH = @HAVE_RPMATCH@
-HAVE_SETENV = @HAVE_SETENV@
-HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
-HAVE_SLEEP = @HAVE_SLEEP@
-HAVE_STPCPY = @HAVE_STPCPY@
-HAVE_STPNCPY = @HAVE_STPNCPY@
-HAVE_STRCASESTR = @HAVE_STRCASESTR@
-HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
-HAVE_STRPBRK = @HAVE_STRPBRK@
-HAVE_STRSEP = @HAVE_STRSEP@
-HAVE_STRTOD = @HAVE_STRTOD@
-HAVE_STRTOLL = @HAVE_STRTOLL@
-HAVE_STRTOULL = @HAVE_STRTOULL@
-HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
-HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
-HAVE_SYMLINK = @HAVE_SYMLINK@
-HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
-HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
-HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
-HAVE_UNISTD_H = @HAVE_UNISTD_H@
-HAVE_UNLINKAT = @HAVE_UNLINKAT@
-HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
-HAVE_USLEEP = @HAVE_USLEEP@
-HAVE_WCHAR_H = @HAVE_WCHAR_H@
-HAVE_WCHAR_T = @HAVE_WCHAR_T@
-HAVE_WCPCPY = @HAVE_WCPCPY@
-HAVE_WCPNCPY = @HAVE_WCPNCPY@
-HAVE_WCRTOMB = @HAVE_WCRTOMB@
-HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
-HAVE_WCSCAT = @HAVE_WCSCAT@
-HAVE_WCSCHR = @HAVE_WCSCHR@
-HAVE_WCSCMP = @HAVE_WCSCMP@
-HAVE_WCSCOLL = @HAVE_WCSCOLL@
-HAVE_WCSCPY = @HAVE_WCSCPY@
-HAVE_WCSCSPN = @HAVE_WCSCSPN@
-HAVE_WCSDUP = @HAVE_WCSDUP@
-HAVE_WCSLEN = @HAVE_WCSLEN@
-HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
-HAVE_WCSNCAT = @HAVE_WCSNCAT@
-HAVE_WCSNCMP = @HAVE_WCSNCMP@
-HAVE_WCSNCPY = @HAVE_WCSNCPY@
-HAVE_WCSNLEN = @HAVE_WCSNLEN@
-HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
-HAVE_WCSPBRK = @HAVE_WCSPBRK@
-HAVE_WCSRCHR = @HAVE_WCSRCHR@
-HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
-HAVE_WCSSPN = @HAVE_WCSSPN@
-HAVE_WCSSTR = @HAVE_WCSSTR@
-HAVE_WCSTOK = @HAVE_WCSTOK@
-HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
-HAVE_WCSXFRM = @HAVE_WCSXFRM@
-HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
-HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
-HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
-HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
-HAVE_WINT_T = @HAVE_WINT_T@
-HAVE_WMEMCHR = @HAVE_WMEMCHR@
-HAVE_WMEMCMP = @HAVE_WMEMCMP@
-HAVE_WMEMCPY = @HAVE_WMEMCPY@
-HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
-HAVE_WMEMSET = @HAVE_WMEMSET@
-HAVE__BOOL = @HAVE__BOOL@
-HAVE__EXIT = @HAVE__EXIT@
-HELP2MAN = @HELP2MAN@
-INCLUDE_NEXT = @INCLUDE_NEXT@
-INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBHELLO_LIBDEPS = @LIBHELLO_LIBDEPS@
-LIBHELLO_LTLIBDEPS = @LIBHELLO_LTLIBDEPS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
-LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
-LOCALE_JA = @LOCALE_JA@
-LOCALE_ZH_CN = @LOCALE_ZH_CN@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
-NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
-NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
-NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
-NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
-NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
-NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
-NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
-NEXT_ERRNO_H = @NEXT_ERRNO_H@
-NEXT_GETOPT_H = @NEXT_GETOPT_H@
-NEXT_STDDEF_H = @NEXT_STDDEF_H@
-NEXT_STDLIB_H = @NEXT_STDLIB_H@
-NEXT_STRING_H = @NEXT_STRING_H@
-NEXT_UNISTD_H = @NEXT_UNISTD_H@
-NEXT_WCHAR_H = @NEXT_WCHAR_H@
-NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
-PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
-RANLIB = @RANLIB@
-REPLACE_BTOWC = @REPLACE_BTOWC@
-REPLACE_CALLOC = @REPLACE_CALLOC@
-REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
-REPLACE_CHOWN = @REPLACE_CHOWN@
-REPLACE_CLOSE = @REPLACE_CLOSE@
-REPLACE_DUP = @REPLACE_DUP@
-REPLACE_DUP2 = @REPLACE_DUP2@
-REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
-REPLACE_GETCWD = @REPLACE_GETCWD@
-REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
-REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
-REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
-REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
-REPLACE_ISATTY = @REPLACE_ISATTY@
-REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
-REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
-REPLACE_LCHOWN = @REPLACE_LCHOWN@
-REPLACE_LINK = @REPLACE_LINK@
-REPLACE_LINKAT = @REPLACE_LINKAT@
-REPLACE_LSEEK = @REPLACE_LSEEK@
-REPLACE_MALLOC = @REPLACE_MALLOC@
-REPLACE_MBRLEN = @REPLACE_MBRLEN@
-REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
-REPLACE_MBSINIT = @REPLACE_MBSINIT@
-REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
-REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
-REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
-REPLACE_MBTOWC = @REPLACE_MBTOWC@
-REPLACE_MEMCHR = @REPLACE_MEMCHR@
-REPLACE_MEMMEM = @REPLACE_MEMMEM@
-REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
-REPLACE_NULL = @REPLACE_NULL@
-REPLACE_PREAD = @REPLACE_PREAD@
-REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
-REPLACE_PUTENV = @REPLACE_PUTENV@
-REPLACE_PWRITE = @REPLACE_PWRITE@
-REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
-REPLACE_READ = @REPLACE_READ@
-REPLACE_READLINK = @REPLACE_READLINK@
-REPLACE_REALLOC = @REPLACE_REALLOC@
-REPLACE_REALPATH = @REPLACE_REALPATH@
-REPLACE_RMDIR = @REPLACE_RMDIR@
-REPLACE_SETENV = @REPLACE_SETENV@
-REPLACE_SLEEP = @REPLACE_SLEEP@
-REPLACE_STPNCPY = @REPLACE_STPNCPY@
-REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
-REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
-REPLACE_STRDUP = @REPLACE_STRDUP@
-REPLACE_STRERROR = @REPLACE_STRERROR@
-REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
-REPLACE_STRNCAT = @REPLACE_STRNCAT@
-REPLACE_STRNDUP = @REPLACE_STRNDUP@
-REPLACE_STRNLEN = @REPLACE_STRNLEN@
-REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
-REPLACE_STRSTR = @REPLACE_STRSTR@
-REPLACE_STRTOD = @REPLACE_STRTOD@
-REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
-REPLACE_SYMLINK = @REPLACE_SYMLINK@
-REPLACE_TOWLOWER = @REPLACE_TOWLOWER@
-REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
-REPLACE_UNLINK = @REPLACE_UNLINK@
-REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
-REPLACE_UNSETENV = @REPLACE_UNSETENV@
-REPLACE_USLEEP = @REPLACE_USLEEP@
-REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
-REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
-REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
-REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
-REPLACE_WCTOB = @REPLACE_WCTOB@
-REPLACE_WCTOMB = @REPLACE_WCTOMB@
-REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
-REPLACE_WRITE = @REPLACE_WRITE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STDBOOL_H = @STDBOOL_H@
-STDDEF_H = @STDDEF_H@
-STRIP = @STRIP@
-UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
-UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
-UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gl_LIBOBJS = @gl_LIBOBJS@
-gl_LTLIBOBJS = @gl_LTLIBOBJS@
-gltests_LIBOBJS = @gltests_LIBOBJS@
-gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
-gltests_WITNESS = @gltests_WITNESS@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-lispdir = @lispdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-man_MANS = hello.1
-EXTRA_DIST = $(man_MANS)
-MAINTAINERCLEANFILES = $(man_MANS)
-
-# The man pages depend on the --help strings and the version number.
-common_mandeps = $(top_srcdir)/configure.ac
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu man/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
- @list=''; test -n "$(man1dir)" || exit 0; \
- { for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- @list='$(MANS)'; if test -n "$$list"; then \
- list=`for p in $$list; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
- if test -n "$$list" && \
- grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
- echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
- grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \
- echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \
- echo " typically \`make maintainer-clean' will remove them" >&2; \
- exit 1; \
- else :; fi; \
- else :; fi
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-man1 install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
- uninstall-am uninstall-man uninstall-man1
-
-
-# Depend on the source, not the binary; we don't need to regenerate the
-# binary when any source file changes, only the main one.
-# Use -o so that the `missing' program can infer the output file.
-hello.1: $(top_srcdir)/src/hello.c $(common_mandeps)
- $(HELP2MAN) --name="friendly greeting program" ../src/hello -o $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.40.4.
-.TH HELLO "1" "April 2012" "hello 2.8" "User Commands"
-.SH NAME
-hello \- friendly greeting program
-.SH SYNOPSIS
-.B hello
-[\fIOPTION\fR]...
-.SH DESCRIPTION
-Print a friendly, customizable greeting.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-display this help and exit
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-display version information and exit
-.TP
-\fB\-t\fR, \fB\-\-traditional\fR
-use traditional greeting format
-.TP
-\fB\-n\fR, \fB\-\-next\-generation\fR
-use next\-generation greeting format
-.TP
-\fB\-g\fR, \fB\-\-greeting\fR=\fITEXT\fR
-use TEXT as the greeting message
-.SH "REPORTING BUGS"
-Report bugs to: bug\-hello@gnu.org
-.br
-GNU Hello home page: <http://www.gnu.org/software/hello/>
-.br
-General help using GNU software: <http://www.gnu.org/gethelp/>
-.SH COPYRIGHT
-Copyright \(co 2011 Free Software Foundation, Inc.
-License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
-.br
-This is free software: you are free to change and redistribute it.
-There is NO WARRANTY, to the extent permitted by law.
-.SH "SEE ALSO"
-The full documentation for
-.B hello
-is maintained as a Texinfo manual. If the
-.B info
-and
-.B hello
-programs are properly installed at your site, the command
-.IP
-.B info hello
-.PP
-should give you access to the complete manual.
+++ /dev/null
-Name: hello
-Version: 2.8
-Release: 1%{?dist}
-Summary: The "Hello World" program from GNU
-
-License: GPLv3+
-URL: http://ftp.gnu.org/gnu/%{name}
-Source0: http://ftp.gnu.org/gnu/%{name}/%{name}-%{version}.tar.gz
-
-BuildRequires: gettext
-
-Requires(post): info
-Requires(preun): info
-
-%description
-The "Hello World" program, done with all bells and whistles of a proper FOSS
-project, including configuration, build, internationalization, help files, etc.
-
-%prep
-%setup -q
-
-%build
-%configure
-make %{?_smp_mflags}
-
-%install
-%make_install
-%find_lang %{name}
-rm -f %{buildroot}/%{_infodir}/dir
-
-%post
-/sbin/install-info %{_infodir}/%{name}.info %{_infodir}/dir || :
-
-%preun
-if [ $1 = 0 ] ; then
-/sbin/install-info --delete %{_infodir}/%{name}.info %{_infodir}/dir || :
-fi
-
-%files -f %{name}.lang
-%doc AUTHORS ChangeLog COPYING NEWS README THANKS TODO
-%{_mandir}/man1/hello.1.gz
-%{_infodir}/%{name}.info.gz
-%{_bindir}/hello
-
-%changelog
-* Tue Sep 06 2011 The Coon of Ty <Ty@coon.org> 2.8-1
-- Initial version of the package
+++ /dev/null
-2011-03-22 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.18.1.
- * Rules-quot: Upgrade to gettext-0.18.1.
-
-2010-02-26 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.17.
-
-2007-11-02 Karl Berry <karl@gnu.org>
-
- * LINGUAS: remove de_DE and es_AR, add ms and ro.
-
-2007-07-11 Karl Berry <karl@gnu.org>
-
- * LINGUAS: add en@quot and en@boldquot, as recommended by the
- gettext manual.
-
-2006-11-08 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.16.
- * ORIG: New file, from gettext-0.16.
-
-2006-08-13 Karl Berry <karl@gnu.org>
-
- * POTFILES.in: update for gnulib, new source structure.
-
-2006-08-13 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.15.
- * ORIG: New file, from gettext-0.15.
-
-2005-05-28 gettextize <bug-gnu-gettext@gnu.org>
-
- * ORIG: New file, from gettext-0.14.5.
-
-2005-05-28 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.14.5.
- * ORIG: New file, from gettext-0.14.5.
-
-2005-03-27 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.14.3.
- * ORIG: New file, from gettext-0.14.3.
-
-2005-01-29 Karl Berry <karl@gnu.org>
-
- * vi.po: new file (Clytie Siddall).
-
-2004-05-16 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.14.1.
- * Rules-quot: Upgrade to gettext-0.14.1.
-
-2004-03-21 Karl Eichwalder <ke@gnu.franken.de>
-
- * zh_CN.po: Update (Meng Jie).
-
- * uk.po: Update (Igor Sachko)
- * nb.po: Update (Eivind Tagseth).
-
- * zh_CN.po: New file (Meng Jie).
- * sr.po: New file (Aleksandar Jelenak).
- * eu.po: New file (Mikel Olasagasti).
- * LINGUAS: Add eu, sr, and zh_CN.
-
-2003-05-06 Karl Eichwalder <ke@gnu.franken.de>
-
- * ga.po: New file (Kevin Patrick Scannell)
- * LINGUAS: Add ga
-
-2003-05-01 Karl Eichwalder <ke@gnu.franken.de>
-
- * ro.po: New file (Eugen Hoanca).
- * LINGUAS: Add ro.
-
-2003-02-26 Karl Eichwalder <ke@gnu.franken.de>
-
- * ka.po: New file (Nugzar Nebieridze).
- * LINGUAS: Add ka.
-
-2002-12-07 Karl Eichwalder <ke@gnu.franken.de>
-
- * fa.po: New file (Behdad Esfahbod).
- * LINGUAS: Add fa.
-
-2002-11-03 Karl Eichwalder <keichwa@gmx.net>
-
- * es_AR.po: New file (Cesar H. Roldan).
- * LINGUAS: Add es_AR.
-
- * 2002-07 - 2002-11:
- * fi.po: Update (Tommi Vainikainen).
- * fr.po: Update (Michel Robitaille).
- * pt_BR.po: Update (Alexandre Folle de Menezes).
-
-2002-07-20 Karl Eichwalder <keichwa@gmx.net>
-
- * Makevars (XGETTEXT_OPTIONS): Add --no-wrap.
-
-2002-07-20 Karl Eichwalder <keichwa@gmx.net>
-
- * 2002-06:
- * es.po: Update (Santiago Vila Doncel).
- * ru.po: Update (Oleg S. Tihonov).
- * sk.po: Update (Marcel Telka).
-
-2002-05-29 Karl Eichwalder <keichwa@gmx.net>
-
- * 2002-05:
- * sk.po: Update (Marcel Telka).
-
-2002-05-22 Karl Eichwalder <keichwa@gmx.net>
-
- * 2002-05:
- * ca.po: New file (Jordi Valverde).
- * LINGUAS: Add 'ca'.
-
- * 2002-04:
- * hr.po: New file (Mirsad Todorovac).
- * LINGUAS: Add 'hr'.
-
- * 2002-03:
- * fr.po: Update (Michel Robitaille).
- * gl.po: Update (Jacobo Tarrio).
- * hu.po: Update (Emese Kovacs).
- * id.po: Update (Tedi Heriyanto).
- * ru.po: Update (Oleg S. Tihonov).
-
- * 2002-02:
- * da.po: Update (Keld Simonsen).
- * de.po: Update (Karl Eichwalder).
- * eo.po: Update (Edmund GRIMLEY EVANS).
- * et.po: Update (Toomas Soome).
- * he.po: Update (Eli Zaretskii).
- * ja.po: Update (IIDA Yosiaki).
- * nl.po: Update (Ivo Timmermans).
- * nn.po: Update (Kjetil Torgrim Homme).
- * sk.po: Update (Marcel Telka).
- * tr.po: Update (Nilgün Belma Bugüner).
-
-2002-05-22 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.11.2.
- * remove-potcdate.sin: New file, from gettext-0.11.2.
-
-2002-02-02 Karl Eichwalder <keichwa@gmx.net>
-
- * he.po: New file (Eli Zaretskii).
- * LINGUAS: Add 'he'.
-
- * de.po: Update (Karl Eichwalder).
- * es.po: Update (Santiago Vila Doncel).
- * fr.po: Update (Michel Robitaille).
- * it.po: Update (Marco d'Itri).
- * ko.po: Update (Changwoo Ryu).
- * sv.po: Update (Christian Rose).
-
- * LINGUAS: New file. Add values from ALL_LINGUAS of
- ../configure.ac.
-
-2002-01-31 Karl Eichwalder <keichwa@gmx.net>
-
- * Makevars: New file, use Makevars.template from
- gettext-0.11.
-
-2002-01-31 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.11.
- * boldquot.sed: New file, from gettext-0.11.
- * en@boldquot.header: New file, from gettext-0.11.
- * en@quot.header: New file, from gettext-0.11.
- * insert-header.sin: New file, from gettext-0.11.
- * quot.sed: New file, from gettext-0.11.
- * Rules-quot: New file, from gettext-0.11.
-
-2001-12-29 Karl Eichwalder <keichwa@gmx.net>
-
- * gl.po: Update (Jacobo Tarrio).
-
-2001-11-01 gettextize <bug-gnu-gettext@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.11-pre1.
-
-2001-10-08 Karl Eichwalder <keichwa@gmx.net>
-
- * hu.po: New file (Emese Kovács).
-
-2001-08-29 Karl Eichwalder <keichwa@gmx.net>
-
- * da.po: Update (Keld Simonsen).
-
-2001-08-16 Karl Eichwalder <keichwa@gmx.net>
-
- * tr.po: Update (Nilgün Belma Bugüner).
- * ru.po: Update (Oleg S. Tihonov).
- * fr.po: Update (Michel Robitaille).
- * et.po: Update (Toomas Soome).
-
-2001-08-11 Karl Eichwalder <keichwa@gmx.net>
-
- * it.po: Update (Marco d'Itri).
-
-2001-07-31 Karl Eichwalder <keichwa@gmx.net>
-
- * nn.po: New file (Kjetil Torgrim Homme).
- * nb.po: Rename (was no.po).
-
-2001-07-30 Karl Eichwalder <keichwa@gmx.net>
-
- * fr.po: Update (Michel Robitaille).
-
-2001-07-27 gettextize <bug-gnu-utils@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.10.39.
-
-2001-07-23 Karl Eichwalder <keichwa@gmx.net>
-
- * it.po: Update (Marco d'Itri).
-
-2001-06-30 Karl Eichwalder <keichwa@gmx.net>
-
- * eo.po: Update (Edmund GRIMLEY EVANS).
-
-2001-06-25 Karl Eichwalder <keichwa@gmx.net>
-
- * et.po: Update (Toomas Soome).
- * fi.po: Ditto (Tommi Vainikainen).
- * ko.po: Ditto (Changwoo Ryu).
- * ru.po: Ditto (Oleg S. Tihonov).
- * sk.po: Ditto (Stanislav Meduna).
-
-2001-06-24 Karl Eichwalder <keichwa@gmx.net>
-
- * de_DE.po: Update.
-
- * de.po: Update.
- * es.po: Ditto (Santiago Vila Doncel).
- * gl.po: Ditto (Jacobo Tarrio).
- * pl.po: Ditto (Rafał Maszkowski).
- * sv.po: Ditto (Christian Rose).
- * tr.po: Ditto (Nilgün Belma Bugüner).
-
-2001-06-18 Karl Eichwalder <keichwa@gmx.net>
-
- * da.po: Update (Keld Simonsen).
- * fr.po: Ditto (Michel Robitaille).
- * it.po: Ditto (Marco d'Itri).
-
-2001-06-09 Karl Eichwalder <keichwa@gmx.net>
-
- * es.po: Update (Santiago Vila Doncel).
-
- * sk.po: Update (Stanislav Meduna).
-
-2001-06-06 Karl Eichwalder <keichwa@gmx.net>
-
- * es.po: Update (Santiago Vila Doncel).
-
-2001-06-05 Karl Eichwalder <keichwa@gmx.net>
-
- * fi.po: Update (Tommi Vainikainen).
-
- * eo.po: Update (Edmund GRIMLEY EVANS).
- * sv.po: Update (Christian Rose).
-
-2001-06-04 Karl Eichwalder <keichwa@gmx.net>
-
- * pl.po: Update (Rafał Maszkowski).
-
- * gl.po: New file (Jacobo Tarrio).
-
- * ru.po: Update (Oleg S. Tihonov).
-
- * de.po: Update (Karl Eichwalder).
- * et.po: Update (Toomas Soome).
- * ko.po: Update (Changwoo Ryu).
- * tr.po: Update (Nilgün Belma Bugüner).
-
-2001-06-02 Karl Eichwalder <keichwa@gmx.net>
-
- * tr.po: New file (Nilgün Belma Bugüner).
-
-2001-05-30 Karl Eichwalder <keichwa@gmx.net>
-
- * fr.po: Update (Michel Robitaille).
-
-2001-05-29 Karl Eichwalder <keichwa@gmx.net>
-
- * uk.po: New file (Igor Sachko).
-
-2001-05-24 gettextize <bug-gnu-utils@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.10.38.
-
-2001-05-16 Karl Eichwalder <keichwa@gmx.net>
-
- * eo.po: New file (Edmund GRIMLEY EVANS).
-
-2001-05-14 Karl Eichwalder <keichwa@gmx.net>
-
- * ko.po: Update (Changwoo Ryu).
-
-2001-05-10 Karl Eichwalder <keichwa@gmx.net>
-
- * ru.po: Update (Oleg S. Tihonov).
-
-2001-04-28 gettextize <bug-gnu-utils@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.10.37.
-
-2001-04-28 Karl Eichwalder <keichwa@gmx.net>
-
- * ja.po: Update (IIDA Yosiaki).
-
-2001-04-02 Karl Eichwalder <keichwa@gmx.net>
-
- * fi.po: Update (Tommi Vainikainen).
-
-2001-03-31 Karl Eichwalder <keichwa@gmx.net>
-
- * Makefile.in.in (.po.gmo): Add --check switch.
-
-2001-03-31 gettextize <bug-gnu-utils@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.10.36.
-
-2001-03-22 gettextize <bug-gnu-utils@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.10.36.
-
-2001-03-19 gettextize <bug-gnu-utils@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.10.36.
- * cat-id-tbl.c, stamp-cat-id: Remove files.
-
-2001-03-19 Karl Eichwalder <keichwa@gmx.net>
-
- * el.po: Replace one char with '?' to please msgmerge (invalid
- multibyte sequence).
-
-2001-03-19 gettextize <bug-gnu-utils@gnu.org>
-
- * Makefile.in.in: Upgrade to gettext-0.10.36.
- * cat-id-tbl.c, stamp-cat-id: Remove files.
-
-2000-12-11 Karl Eichwalder <ke@suse.de>
-
- * da.po: Update (Keld Simonsen).
-
-2000-11-18 Karl Eichwalder <keichwa@gmx.net>
-
- * de_DE.po: New file (utf-8).
-
-2000-07-21 Karl Eichwalder <keichwa@gmx.net>
-
- * es.po: Update (Santiago Vila Doncel).
-
-2000-06-22 Karl Eichwalder <keichwa@gmx.net>
-
- * sv.po: Update (Christian Rose).
-
-2000-06-15 Karl Eichwalder <keichwa@gmx.net>
-
- * ja.po: Update (IIDA Yosiaki).
-
-2000-06-11 Karl Eichwalder <ke@gnu.franken.de>
-
- * it.po: Update (Giovanni Bortolozzo).
-
-2000-06-10 Karl Eichwalder <ke@gnu.franken.de>
-
- * sk.po: Update (Miroslav Vasko).
-
-2000-06-06 Karl Eichwalder <ke@gnu.franken.de>
-
- * nl.po: Update (Ivo Timmermans).
- * fr.po: Update (Michel Robitaille).
- * pl.po: Update (Rafal Maszkowski).
- * et.po: Update (Toomas Soome).
- * fi.po: Update (Tommi Vainikainen).
-
- * fi.po: New file (Tommi Vainikainen).
-
-2000-05-21 Karl Eichwalder <ke@gnu.franken.de>
-
- * nl.po: Update (Ivo Timmermans).
-
-2000-03-24 Karl EICHWALDER <ke@gnu.franken.de>
-
- * ru.po: Remove "fuzzy" from header entry.
-
-2000-03-20 Karl EICHWALDER <ke@gnu.franken.de>
-
- * pl.po: Update.
-
-2000-03-13 Karl EICHWALDER <ke@gnu.franken.de>
-
- * de.po: Translate all strings. Resolve fuzzy marks.
-
-2000-02-16 Karl EICHWALDER <ke@gnu.franken.de>
-
- * et.po: New file.
-
-2000-02-14 Karl EICHWALDER <ke@gnu.franken.de>
-
- * es.po: Update.
-
-2000-01-09 Karl EICHWALDER <ke@gnu.franken.de>
-
- * sk.po: Update.
-
-1999-10-23 Karl Eichwalder <ke@gnu.franken.de>
-
- * ja.po: New file.
-
-1999-10-09 Karl Eichwalder <ke@gnu.franken.de>
-
- * fr.po, it.po, ko.po, lv.po, ru.po: Update.
-
-1999-10-04 Karl Eichwalder <ke@gnu.franken.de>
-
- * fr.po, pt_BR.po: New files.
-
-1999-10-02 Karl Eichwalder <ke@gnu.franken.de>
-
- * lv.po: New file.
- * ru.po: Update.
-
-1999-08-15 Karl Eichwalder <ke@gnu.franken.de>
-
- * pt_BR.po: New file.
-
-1999-08-14 Karl Eichwalder <ke@gnu.franken.de>
-
- * fr.po: Update.
-
-1999-08-06 Karl Eichwalder <ke@gnu.franken.de>
-
- * ru.po: Update.
-
-1999-08-03 Karl Eichwalder <ke@gnu.franken.de>
-
- * ko.po: Update.
-
-1999-07-12 Karl Eichwalder <ke@gnu.franken.de>
-
- * pl.po: Update.
-
- * el.po, sk.po: New files.
-
-1999-01-09 Karl Eichwalder <ke@suse.de>
-
- * da.po: Update.
-
-1998-12-15 Karl Eichwalder <ke@suse.de>
-
- * da.po, de.po, es.po, fr.po, ru.po: Update.
-
-1998-12-12 Karl Eichwalder <ke@suse.de>
-
- * de.po: Update.
-
-1998-12-11 Karl Eichwalder <ke@suse.de>
-
- * ru.po: New file.
-
-1998-06-15 Karl Eichwalder <ke@suse.de>
-
- * it.po: New file.
-
-1998-04-30 Karl Eichwalder <ke@suse.de>
-
- * da.po: New file.
-
-1998-02-14 Karl Eichwalder <ke@suse.de>
-
- * no.po: Update.
-
-Sun May 25 19:19:51 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * de.po: Update.
-
-Mon Apr 28 17:38:54 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * es.po: Update.
-
-Wed Mar 26 09:58:18 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * de.po: Update.
-
-Sun Mar 23 18:28:18 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * sv.po: Update.
-
-Fri Feb 14 08:24:07 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * pl.po: Update.
-
-Sun Feb 2 18:42:04 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * de.po es.po fr.po sv.po: Update.
-
-Sat Jan 11 16:51:45 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * nl.po: Update.
-
-Fri Jan 10 13:09:59 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * fr.po: Update.
-
-Wed Jan 8 08:53:41 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * no.po: Update.
-
-Tue Jan 7 18:34:57 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * es.po: Update.
-
-Sun Jan 5 09:58:47 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * de.po fr.po: Updates.
-
-Sat Jan 4 17:49:59 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * es.po: Update.
-
-Thu Dec 12 18:58:01 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * it.po: Remove.
-
-Wed Dec 11 20:05:00 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * mailshar gnu-translation@prep.ai.mit.edu
- hello-1.3.6/po/hello.pot.
-
- * POTFILES.in: remove `src/getopt1.c'.
-
- * de.po es.po fr.po ko.po nl.po no.po pl.po pt.po sl.po sv.po: new
- files from alpha.gnu.ai.mit.edu:/gnu/po/maint/hello.
-
-Fri Mar 15 12:43:14 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * fr.po: New (version 1.3.2).
-
-Tue Mar 12 10:15:26 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * mailshar gnu-translation@prep.ai.mit.edu
- hello-1.3.4/po/hello.pot.
-
-Fri Mar 8 20:40:50 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * de.po: New.
-
-Tue Mar 5 09:58:14 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * de.po: New. Reflect current version 1.3.2; now 1.3.3.
-
-Sun Mar 3 21:06:15 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.in.in ($(PACKAGE).pot): Add POTFILES.
-
- * POTFILES.in: remove `src/version.c'.
-
-Tue Dec 19 10:16:39 1995 Karl Eichwalder <ke@ke.Central.DE>
-
- * POTFILES.in: Reflect, that source files now in ../src/.
-
-Fri Dec 15 11:59:51 1995 Karl Eichwalder <ke@ke.Central.DE>
-
- * POTFILES.in: New file. Lists `getopt.c', `getopt1.c',
- `hello.c', and `version.c'.
-
-Copyright (C) 1995, 1996, 1997, 1998, 1999, 2002, 2003, 2004, 2005, 2006
-Free Software Foundation, Inc.
-
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
+++ /dev/null
-bg
-ca
-da
-de
-el
-eo
-es
-et
-eu
-fa
-fi
-fr
-ga
-gl
-he
-hr
-hu
-id
-it
-ja
-ka
-ko
-lv
-ms
-nb
-nl
-nn
-pl
-pt
-pt_BR
-ro
-ru
-sk
-sl
-sr
-sv
-th
-tr
-uk
-vi
-zh_CN
-zh_TW
+++ /dev/null
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-#
-# Origin: gettext-0.18
-GETTEXT_MACRO_VERSION = 0.18
-
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-
-SHELL = /bin/sh
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-datarootdir = @datarootdir@
-datadir = @datadir@
-localedir = @localedir@
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-
-# We use $(mkdir_p).
-# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
-# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
-# @install_sh@ does not start with $(SHELL), so we add it.
-# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
-# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
-# versions, $(mkinstalldirs) and $(install_sh) are unused.
-mkinstalldirs = $(SHELL) @install_sh@ -d
-install_sh = $(SHELL) @install_sh@
-MKDIR_P = @MKDIR_P@
-mkdir_p = @mkdir_p@
-
-GMSGFMT_ = @GMSGFMT@
-GMSGFMT_no = @GMSGFMT@
-GMSGFMT_yes = @GMSGFMT_015@
-GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
-MSGFMT_ = @MSGFMT@
-MSGFMT_no = @MSGFMT@
-MSGFMT_yes = @MSGFMT_015@
-MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
-XGETTEXT_ = @XGETTEXT@
-XGETTEXT_no = @XGETTEXT@
-XGETTEXT_yes = @XGETTEXT_015@
-XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = @MSGMERGE@ --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-# Makevars gets inserted here. (Don't remove this line!)
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
-
-.po.mo:
- @echo "$(MSGFMT) -c -o $@ $<"; \
- $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
- @lang=`echo $* | sed -e 's,.*/,,'`; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
- cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
- sed -e '/^#/d' $< > t-$@
- mv t-$@ $@
-
-
-all: all-@USE_NLS@
-
-all-yes: stamp-po
-all-no:
-
-# Ensure that the gettext macros and this Makefile.in.in are in sync.
-CHECK_MACRO_VERSION = \
- test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
- || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
- exit 1; \
- }
-
-# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
-# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
-# we don't want to bother translators with empty POT files). We assume that
-# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
-# In this case, stamp-po is a nop (i.e. a phony target).
-
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
- @$(CHECK_MACRO_VERSION)
- test ! -f $(srcdir)/$(DOMAIN).pot || \
- test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
- @test ! -f $(srcdir)/$(DOMAIN).pot || { \
- echo "touch stamp-po" && \
- echo timestamp > stamp-poT && \
- mv stamp-poT stamp-po; \
- }
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
- if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \
- package_gnu='GNU '; \
- else \
- package_gnu=''; \
- fi; \
- if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
- msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
- else \
- msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
- fi; \
- case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --msgid-bugs-address="$$msgid_bugs_address" \
- ;; \
- *) \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --package-name="$${package_gnu}@PACKAGE@" \
- --package-version='@VERSION@' \
- --msgid-bugs-address="$$msgid_bugs_address" \
- ;; \
- esac
- test ! -f $(DOMAIN).po || { \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
- sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
- if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
- else \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- else \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- }
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
- $(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(srcdir)/$(DOMAIN).pot
- @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
- if test -f "$(srcdir)/$${lang}.po"; then \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
- cd $(srcdir) \
- && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
- $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
- *) \
- $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
- esac; \
- }; \
- else \
- $(MAKE) $${lang}.po-create; \
- fi
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- for file in $(DISTFILES.common) Makevars.template; do \
- $(INSTALL_DATA) $(srcdir)/$$file \
- $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- for file in Makevars; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-install-data-no: all
-install-data-yes: all
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
- $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
- echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
- fi; \
- done; \
- done
-
-install-strip: install
-
-install-dvi install-html install-info install-pdf install-ps:
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- else \
- : ; \
- fi
-installdirs-data-no:
-installdirs-data-yes:
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- fi; \
- done; \
- done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- for file in $(DISTFILES.common) Makevars.template; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-uninstall-data-no:
-uninstall-data-yes:
- catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- done; \
- done
-
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
-
-mostlyclean:
- rm -f remove-potcdate.sed
- rm -f stamp-poT
- rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
- rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
- rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
- rm -f stamp-po $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
- $(MAKE) update-po
- @$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: stamp-po $(DISTFILES)
- dists="$(DISTFILES)"; \
- if test "$(PACKAGE)" = "gettext-tools"; then \
- dists="$$dists Makevars.template"; \
- fi; \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- dists="$$dists $(DOMAIN).pot stamp-po"; \
- fi; \
- if test -f $(srcdir)/ChangeLog; then \
- dists="$$dists ChangeLog"; \
- fi; \
- for i in 0 1 2 3 4 5 6 7 8 9; do \
- if test -f $(srcdir)/ChangeLog.$$i; then \
- dists="$$dists ChangeLog.$$i"; \
- fi; \
- done; \
- if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
- for file in $$dists; do \
- if test -f $$file; then \
- cp -p $$file $(distdir) || exit 1; \
- else \
- cp -p $(srcdir)/$$file $(distdir) || exit 1; \
- fi; \
- done
-
-update-po: Makefile
- $(MAKE) $(DOMAIN).pot-update
- test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
- $(MAKE) update-gmo
-
-# General rule for creating PO files.
-
-.nop.po-create:
- @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
- echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
- exit 1
-
-# General rule for updating PO files.
-
-.nop.po-update:
- @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
- if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
- tmpdir=`pwd`; \
- echo "$$lang:"; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
- cd $(srcdir); \
- if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
- $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
- *) \
- $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
- esac; \
- }; then \
- if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
- rm -f $$tmpdir/$$lang.new.po; \
- else \
- if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
- :; \
- else \
- echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
- exit 1; \
- fi; \
- fi; \
- else \
- echo "msgmerge for $$lang.po failed!" 1>&2; \
- rm -f $$tmpdir/$$lang.new.po; \
- fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
- @:
-
-# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
-# because execution permission bits may not work on the current file system.
-# Use @SHELL@, which is the shell determined by autoconf for the use by its
-# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
-Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
- cd $(top_builddir) \
- && @SHELL@ ./config.status $(subdir)/$@.in po-directories
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile variables for PO directory in any package using GNU gettext.
-
-# Usually the message domain is the same as the package name.
-DOMAIN = $(PACKAGE)
-
-# These two variables depend on the location of this directory.
-subdir = po
-top_builddir = ..
-
-# These options get passed to xgettext.
-XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ \
- \
- --flag=_:1:pass-c-format\
- --flag=N_:1:pass-c-format\
- --flag=error:3:c-format --flag=error_at_line:5:c-format\
-\
- --from-code=UTF-8\
- --flag=asprintf:2:c-format --flag=vasprintf:2:c-format\
- --flag=asnprintf:3:c-format --flag=vasnprintf:3:c-format\
- --flag=wrapf:1:c-format\
- $${end_of_xgettext_options+}
-
-# This is the copyright holder that gets inserted into the header of the
-# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
-# package. (Note that the msgstr strings, extracted from the package's
-# sources, belong to the copyright holder of the package.) Translators are
-# expected to transfer the copyright for their translations to this person
-# or entity, or to disclaim their copyright. The empty string stands for
-# the public domain; in this case the translators are expected to disclaim
-# their copyright.
-COPYRIGHT_HOLDER = Free Software Foundation, Inc.
-
-# This is the email address or URL to which the translators shall report
-# bugs in the untranslated strings:
-# - Strings which are not entire sentences, see the maintainer guidelines
-# in the GNU gettext documentation, section 'Preparing Strings'.
-# - Strings which use unclear terms or require additional context to be
-# understood.
-# - Strings which make invalid assumptions about notation of date, time or
-# money.
-# - Pluralisation problems.
-# - Incorrect English spelling.
-# - Incorrect formatting.
-# It can be your email address, or a mailing list address where translators
-# can write to without being subscribed, or the URL of a web page through
-# which the translators can contact you.
-MSGID_BUGS_ADDRESS = bug-hello@gnu.org
-
-# This is the list of locale categories, beyond LC_MESSAGES, for which the
-# message catalogs shall be used. It is usually empty.
-EXTRA_LOCALE_CATEGORIES =
+++ /dev/null
-# Copyright (C) 2005, 2006 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-#
-# List of source files containing translatable strings.
-
-# Package source files.
-src/hello.c
-
-# Gnulib source files.
-lib/error.c
-lib/getopt.c
-lib/closeout.c
-lib/quotearg.c
-lib/xalloc-die.c
+++ /dev/null
-# Special Makefile rules for English message catalogs with quotation marks.
-
-DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
-
-.SUFFIXES: .insert-header .po-update-en
-
-en@quot.po-create:
- $(MAKE) en@quot.po-update
-en@boldquot.po-create:
- $(MAKE) en@boldquot.po-update
-
-en@quot.po-update: en@quot.po-update-en
-en@boldquot.po-update: en@boldquot.po-update-en
-
-.insert-header.po-update-en:
- @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
- if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
- tmpdir=`pwd`; \
- echo "$$lang:"; \
- ll=`echo $$lang | sed -e 's/@.*//'`; \
- LC_ALL=C; export LC_ALL; \
- cd $(srcdir); \
- if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
- if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
- rm -f $$tmpdir/$$lang.new.po; \
- else \
- if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
- :; \
- else \
- echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
- exit 1; \
- fi; \
- fi; \
- else \
- echo "creation of $$lang.po failed!" 1>&2; \
- rm -f $$tmpdir/$$lang.new.po; \
- fi
-
-en@quot.insert-header: insert-header.sin
- sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
-
-en@boldquot.insert-header: insert-header.sin
- sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
-
-mostlyclean: mostlyclean-quot
-mostlyclean-quot:
- rm -f *.insert-header
+++ /dev/null
-# Bulgarian translation of GNU Hello
-# Copyright (C) 2006 Free Software Foundation, Inc.
-# This file is distributed under the same license as the GNU Hello package.
-# Anton Zinoviev <zinoviev@debian.org>, 2006, 2007
-#
-# This file should be sent to translation@iro.umontreal.ca with the
-# following subject line: TP-Robot hello-VERSION.bg.po
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.3.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2007-08-02 17:59+0300\n"
-"Last-Translator: Anton Zinoviev <zinoviev@debian.org>\n"
-"Language-Team: Bulgarian <dict@fsa-bg.org>\n"
-"Language: bg\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: излишен операнд: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Използвайте „%s --help“ за повече информация\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "здравей, свят\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"┌────────────────┐\n"
-"│ Здравей, свят! │\n"
-"└────────────────┘\n"
-"\n"
-"[Забележка: За най-добре изглеждащ изход, моля използвайте кодиране UTF-8.]\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Здравей, свят!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Използване: %s [ОПЦИЯ]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Извежда дружелюбен поздрав, който може да се настройва.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help извежда тази справка и завършва\n"
-" -v, --version извежда информация за версията и завършва\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional използва традиционния формат за поздрав\n"
-" -n, --next-generation използва формат за поздрав от ново поколение\n"
-" -g, --greeting=ТЕКСТ използва ТЕКСТ като поздравително съобщение\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Съобщавайте за програмни грешки на <%s>.\n"
-"За грешки в българския превод на <dict@fsa-bg.org>\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Съобщавайте за програмни грешки на <%s>.\n"
-"За грешки в българския превод на <dict@fsa-bg.org>\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Авторски права: © %s Free Software Foundation, Inc.\n"
-"Лицензия: GNU GPL версия 3 или следваща <http://www.gnu.org/licenses/gpl."
-"html>\n"
-"Това е свободен софтуер: свободни сте да го променяте и разпространявате.\n"
-"НЕ СЕ ДАВАТ НИКАКВИ ГАРАНЦИИ, доколкото закона позволява това.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Непозната системна грешка"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: опцията „%s“ е двусмислена\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: опцията „--%s“ не допуска аргумент\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: опцията „%c%s“ не допуска аргумент\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: опцията „%s“ изисква аргумент\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: непозната опция „--%s“\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: непозната опция „%c%s“\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: неправилна опция -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: опцията изисква аргумент -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: опцията „-W %s“ е двусмислена\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: опцията „-W %s“ не допуска аргумент\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: опцията „%s“ изисква аргумент\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "грешка при запис"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "„"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "“"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "паметта е изчерпана"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: неправилна опция -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Твърде много аргументи\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello - истинската програма за поздравяване\n"
+++ /dev/null
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
-s/“/“\e[1m/g
-s/”/\e[0m”/g
-s/‘/‘\e[1m/g
-s/’/\e[0m’/g
+++ /dev/null
-# Catalan translation of hello.
-# Copyright © 2010, 2011 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Jordi Mallach <jordi@sindominio.net>, 2010, 2011.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-04-11 22:35+0200\n"
-"Last-Translator: Jordi Mallach <jordi@sindominio.net>\n"
-"Language-Team: Catalan <ca@dodds.net>\n"
-"Language: ca\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: sobra l'operand: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Proveu «%s --help» per obtenir més informació.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "hola, món\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"┌────────────┐\n"
-"│ Hola, món! │\n"
-"└────────────┘\n"
-"[Nota: Per a una visualització correcta, empreu un locale UTF-8]\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Hola, món!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Forma d'ús: %s [OPCIÓ]…\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Imprimeix una salutació agradable i personalitzable.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help mostra aquest missatge d'ajuda i surt\n"
-" -v, --version mostra informació sobre la versió i surt\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional empra el format de salutació tradicional\n"
-" -n, --next-generation empra el format de salutació de nova generació\n"
-" -g, --greeting=TEXT empra TEXT com a missatge de salutació\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Informeu dels errors a: %s\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Informeu dels errors de %s a: %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "Pàgina inicial de %s: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "Pàgina inicial de %s: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Ajuda general sobre l'ús de programari GNU: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright © %s Free Software Foundation, Inc.\n"
-"GPLv3+: llicència GNU GPL ver. 3 o posterior <http://gnu.org/licenses/gpl."
-"html>\n"
-"Aquest és programari lliure: podeu modificar‐lo i redistribuir‐lo si voleu.\n"
-"No hi ha CAP GARANTIA, en la mesura que ho permeta la llei.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "S'ha produït un error del sistema desconegut"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: l'opció «%s» és ambigua\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: l'opció «--%s» no admet arguments\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: l'opció «%c%s» no admet arguments\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: l'opció «--%s» necessita un argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: l'opció «--%s» no és reconeguda\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: l'opció «%c%s» no és reconeguda\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: l'opció «%c» no és vàlida\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s l'opció «%c» necessita un argument\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: l'opció «-W %s» és ambigua\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: l'opció «-W %s» no admet arguments\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: l'opció «-W %s» necessita un argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "s'ha produït un error d'escriptura"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "«"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "»"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "la memòria s'ha exhaurit"
+++ /dev/null
-# translation of hello-2.3.90.po to Danish
-# Danish messages for GNU hello.
-# This file is distributed under the same license as the hello package.
-# Copyright (C) 1996, 2008 Free Software Foundation, Inc.
-#
-# Keld Simonsen <keld@keldix.com>, 2000-2002, 2008,2011.
-# Bo Vagner Hoejer <bo@petshop.ping.dk>, 1998.
-msgid ""
-msgstr ""
-"Project-Id-Version: hello-2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-04-12 07:24+0100\n"
-"Last-Translator: Keld Simonsen <keld@keldix.com>\n"
-"Language-Team: Danish <dansk@dansk-gruppen.dk>\n"
-"Language: da\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.11.4\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: ekstra operand: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Prøv '%s --help' for mere information.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "hej verden\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| Hej verden! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Hej verden!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Brug: %s [TILVALG]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Udskriv en venlig, tilpasselig hilsen.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help vis denne hjælpetekst og afslut\n"
-" -v, --version vis programversion og afslut\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional brug traditionel format for hilsen\n"
-" -n, --next-generation brug næste-generations hilsnings-format\n"
-" -g, --greeting=TEKST brug TEKST som hilsenen\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Rapportér fejl til %s. Rapportér fejl med danske oversættelser til "
-"<dansk@dansk-gruppen.dk>\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Rapportér %s fejl til: %s. Rapportér fejl med danske oversættelser til "
-"<dansk@dansk-gruppen.dk>\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s hjemmeside <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s hjemmeside: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Generel hjælp til brug af GNU-programmer: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Ophavsret © %s Free Software Foundation, Inc.\n"
-"Licens GPLv3+: GNU GPL version 3 eller senere <http://gnu.org/licenses/gpl."
-"html>\n"
-"Dette er frit programmel: du må gerne ændre og redistribuere det.\n"
-"Der er ikke nogen GARANTIER, i det omfang loven tillader dette.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Ukendt systemfejl"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: tilvalg '%s' er flertydigt\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: tilvalg '--%s' tillader ikke et argument\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: tilvalg '%c%s' tillader ikke et argument\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: tilvalg '--%s' kræver et argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: ukendt tilvalg '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: ukendt tilvalg '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: ugyldigt tilvalg - %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: tilvalg kræver et argument - '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: tilvalg '-W %s' er flertydigt\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: tilvalg '-W %s' tillader ikke et argument\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: tilvalg '-w %s' kræver et argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "skrivefejl"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "'"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "'"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "hukommelse er opbrugt"
+++ /dev/null
-# German messages for GNU hello.
-# Copyright (C) 1998, 2002, 2006 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Karl Eichwalder <ke@suse.de>, 1998, 2000, 2001, 2002, 2006.
-# Karl Eichwalder <ke@ke.Central.DE>, 1996-97.
-# Roland Illig <roland.illig@gmx.de>, 2009, 2011.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-04-12 22:19+0100\n"
-"Last-Translator: Roland Illig <roland.illig@gmx.de>\n"
-"Language-Team: German <translation-team-de@lists.sourceforge.net>\n"
-"Language: de\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: zusätzlicher Operand: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Versuchen Sie »%s --help« für weitere Informationen.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "hallo, Welt\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"╔══════════════╗\n"
-"║ Hallo, Welt! ║\n"
-"╚══════════════╝\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Hallo, Welt!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Aufruf: %s [OPTION]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Gibt eine freundliche, einstellbare Begrüßung aus.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help Diese Hilfe anzeigen und Programm beenden\n"
-" -v, --version Programmversion anzeigen und Programm beenden\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional Traditionelles Begrüßungsformat verwenden\n"
-" -n, --next-generation Begrüßungsformat der „Nächsten Generation“ "
-"verwenden\n"
-" -g, --greeting=TEXT TEXT als Begrüßungsmeldung verwenden\n"
-
-# Add address for the german translation.
-# 2000-03-13 05:50:49 CET -ke-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Melden Sie Fehler an: %s\n"
-"Melden Sie Übersetzungsfehler an: <translation-team-de@lists.sourceforge."
-"net>\n"
-
-# Add address for the german translation.
-# 2000-03-13 05:50:49 CET -ke-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Melden Sie Fehler in %s an: %s\n"
-"Melden Sie Übersetzungsfehler an: <translation-team-de@lists.sourceforge."
-"net>\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s-Homepage: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s-Homepage: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Allgemeine Hilfe zum Benutzen von GNU-Software: <http://www.gnu.org/gethelp/"
-">\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"Lizenz: GPLv3+: GNU GPL Version 3 oder neuer <http://gnu.org/licenses/gpl."
-"html>\n"
-"Dies ist Freie Software: Sie dürfen sie ändern und weiterverteilen.\n"
-"Es gibt KEINE GARANTIE, soweit es das Gesetz zulässt.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Unbekannter Systemfehler"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: Option »%s« ist mehrdeutig\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: Option »--%s« erlaubt kein Argument\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: Option »%c%s« erlaubt kein Argument\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: Option »%s« verlangt ein Argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: Unbekannte Option »--%s«\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: Unbekannte Option »%c%s«\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: Unerlaubte Option -- »%c«\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: Option verlangt ein Argument -- »%c«\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: Option »-W %s« ist mehrdeutig\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: Option »-W %s« erlaubt kein Argument\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: Option »-W %s« verlangt ein Argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "Schreibfehler"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "»"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "«"
-
-# Oder einfach: "Speicher voll"?
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "Arbeitsspeicher voll."
+++ /dev/null
-# Greek messages for GNU hello.
-# This file is distributed under the same license as the hello package.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Simos Xenitellis <S.Xenitellis@rhbnc.ac.uk>, 1999.
-# Savvas Radevic <vicedar@gmail.com>, 2011.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-04-06 11:49+0100\n"
-"Last-Translator: Savvas Radevic <vicedar@gmail.com>\n"
-"Language-Team: Greek <team@lists.gnome.gr>\n"
-"Language: el\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: επιπλέον τελεστής: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Δοκιμάστε `%s --help' για περισσότερες πληροφορίες.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "γειά σου, κόσμε\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+------------------+\n"
-"| Γεια σου, κόσμε! |\n"
-"+------------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Γεια σου, κόσμε!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Χρήση: %s [ΕΠΙΛΟΓΗ]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Εκτύπωσε ένα φιλικό, προσαρμόσιμο χαιρετισμό.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help εμφάνιση αυτής της βοήθειας και τερματισμός\n"
-" -v, --version εμφάνιση πληροφοριών έκδοσης και τερματισμός\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional χρήση παραδοσιακής μορφής χαιρετισμού\n"
-" -n, --next-generation χρήση μορφής χαιρετισμού επόμενης γενεάς\n"
-" -g, --greeting=TEXT χρήση κειμένου TEXT ως μήνυμα χαιρετισμού\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Αναφορά σφαλμάτων στο: %s\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Αναφορά %s σφαλμάτων στο: %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s ιστοσελίδα: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s ιστοσελίδα: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Γενική βοήθεια για να χρησιμοποιήσετε το λογισμικό GNU: <http://www.gnu.org/"
-"gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"Άδεια χρήσης GPLv3+: GNU GPL έκδοση 3 ή μεταγενέστερη <http://gnu.org/"
-"licenses/gpl.html>\n"
-"Αυτό είναι ελεύθερο λογισμικό: Είστε ελεύθεροι να το αλλάξετε και να το "
-"αναδιανέμετε.\n"
-"Δεν υπάρχει ΚΑΜΙΑ ΕΓΓΥΗΣΗ στην έκταση που επιτρέπεται από το νόμο.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Άγνωστο σφάλμα συστήματος"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: η επιλογή '%s' είναι διφορούμενη\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: η επιλογή '--%s' δεν δέχεται ορίσματα\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: η επιλογή '%c%s' δεν δέχεται ορίσματα\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: η επιλογή '--%s' απαιτεί όρισμα\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: μη αναγνωρίσιμη επιλογή '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: μη αναγνωρίσιμη επιλογή '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: μη έγκυρη επιλογή -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: η επιλογή απαιτεί ένα όρισμα -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: η επιλογή '-W %s' είναι δοφορούμενη\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: η επιλογή '-W %s' δεν δέχεται ορίσματα\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: η επιλογή '-W %s' απαιτεί όρισμα\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "σφάλμα εγγραφής"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "«"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "»"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "η ιδεατή μνήμη εξαντλήθηκε"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: μη έγκυρη επιλογή -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Πάρα πολλά ορίσματα\n"
-
-# Please check "ΔΕΝ υπάρχει εγγύηση?..."; msgmerge compleain about an invalid
-# multibyte sequence.
-# 2001-03-19 06:33:58 CET -ke-
-#
-# With the new gettext, it works.
-# 2001-05-24 22:07:42 CEST -ke-
-#, fuzzy
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s\n"
-#~ "under the terms of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "ΔΕΝ υπάρχει εγγύηση? ούτε ακόμη για ΛΕΙΤΟΥΡΓIΚΟΤΗΤΑ ή ΚΑΤΑΛΛΗΛΟΤΗΤΑ\n"
-#~ "ΓΙΑ ΚΑΠΟΙΟ ΣΥΓΚΕΚΡΙΜΕΝΟ ΣΚΟΠΟ. Μπορείτε να αναδιανείμετε αντίγραφα\n"
-#~ "του GNU προγράμματος %s κάτω από τη GNU Γενική Δημόσια Άδεια.\n"
-
-#, fuzzy
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: μη συμβατές σημαίες: -m και -t \n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Ποιός είστε\n"
-
-#, fuzzy
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: αδυνατώ να βρω το αρχείο της αλληλογραφίας σας.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Δεν συμβαίνει τίποτα εδώ."
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU hello, THE greeting printing program.\n"
-#~ "\n"
-#~ "Usage: %s [OPTION]\n"
-#~ "\n"
-#~ " -h, --help display this help and exit\n"
-#~ " -v, --version display version information and exit\n"
-#~ " -t, --traditional use traditional greeting format\n"
-#~ " -m, --mail print your mail\n"
-#~ "\n"
-#~ "Report bugs to bug-gnu-hello@prep.ai.mit.edu.\n"
-#~ msgstr ""
-#~ "Αυτό είναι το GNU Hello, το πρόγραμμα εμφάνισης χαιρετισμού.\n"
-#~ "Χρήση: %s [ΕΠΙΛΟΓΗ]\n"
-#~ " -h, --help εμφάνιση αυτής της βοήθειας και έξοδος\n"
-#~ " -v, --version εμφάνιση πληροφοριών έκδοσης και έξοδος\n"
-#~ " -t, --traditional χρήση της παραδοσιακής μορφής χαιρετισμού\n"
-#~ " -m, --mail εμφάνιση της αλληλογραφίας\n"
-#~ "\n"
-#~ "Αναφερατε σφάλματα στο bug-gnu-hello@prep.ai.mit.edu.\n"
+++ /dev/null
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
-# This catalog furthermore displays the text between the quotation marks in
-# bold face, assuming the VT100/XTerm escape sequences.
-#
+++ /dev/null
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
+++ /dev/null
-# Esperantaj mesaĝoj por GNU hello.
-# Copyright (C) 2001 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Edmund GRIMLEY EVANS <edmundo@rano.org>, 2001-2002, 2006-2007, 2010-2011.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-04-16 22:16+0100\n"
-"Last-Translator: Edmund GRIMLEY EVANS <edmundo@rano.org>\n"
-"Language-Team: Esperanto <translation-team-eo@lists.sourceforge.net>\n"
-"Language: eo\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: kroma argumento: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Provu '%s --help' por pli da informoj.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "saluton, mondo\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+-----------------+\n"
-"| Saluton, mondo! |\n"
-"+-----------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Saluton, mondo!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Uzado: %s [OPCIO]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Eltajpi amikan, adapteblan saluton.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help montri ĉi tiun helpon kaj eliri\n"
-" -v, --version montri version kaj eliri\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional uzi tradician salut-formon\n"
-" -n, --next-generation uzi novgeneracian salut-formon\n"
-" -g, --greeting=TEKSTO uzi TEKSTOn kiel la salutmesaĝon\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Raportu cimojn al: %s\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Raportu %s-cimojn al: %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s hejmpaĝo: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s hejmpaĝo: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr "Ĝenerala helpo pri GNU-programoj: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Kopirajto (C) %s Free Software Foundation, Inc.\n"
-"Rajtigilo GPLv3+: GNU-GPL versio 3 aŭ posta <http://www.gnu.org/licenses/gpl."
-"html>\n"
-"Ĉi tio estas libera programo: vi rajtas ŝanĝi kaj pludoni kopiojn.\n"
-"Estas NENIA GARANTIO, laŭ la grado leĝe permesata.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Nekonata sistemeraro"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: opcio '%s' estas plursenca\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: opcio '--%s' ne allasas argumenton\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: opcio '%c%s' ne allasas argumenton\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: opcio '--%s' bezonas argumenton\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: nerekonata opcio '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: nerekonata opcio '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: nevalida opcio -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: opcio bezonas argumenton -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: opcio '-W %s' estas plursenca\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: opcio '-W %s' ne allasas argumenton\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: opcio '-W %s' bezonas argumenton\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "skriberaro"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "“"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "”"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "memoro elĉerpiĝis"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: nepermesata opcio -- %c\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, LA salut-eltajpa programo.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Kopirajto (C) %s Free Software Foundation, Inc.\n"
-#~ "Estas NENIA garantio; eĉ ne por KOMERCA KVALITO aŭ ADEKVATECO POR\n"
-#~ "DIFINITA CELO. Vi rajtas pludoni kopiojn de GNU %s sub la kondiĉoj\n"
-#~ "de la Ĝenerala Publika Rajtigilo de GNU.\n"
-#~ "Por pli da informoj pri ĉi tio, vidu la dosieron COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Malkongruaj flagoj: -m kaj -t\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Ne povas trovi vian leterkestodosieron.\n"
+++ /dev/null
-# Mensajes en español para GNU hello.
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2006, 2010, 2011 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Javier Romañach <jromanac@dial.eunet.es>, 1996.
-# Santiago Vila Doncel <sanvila@unex.es>, 1997, 1998, 1999, 2000, 2001, 2002, 2006, 2010, 2011.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-04-18 13:19+0200\n"
-"Last-Translator: Santiago Vila Doncel <sanvila@unex.es>\n"
-"Language-Team: Spanish <es@li.org>\n"
-"Language: es\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: operando extra: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Pruebe `%s --help' para más información.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "hola mundo\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| ¡Hola, mundo! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "¡Hola mundo!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Modo de empleo: %s [OPCIÓN]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Muestra un saludo amistoso y configurable.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help muestra esta ayuda y finaliza\n"
-" -v, --version muestra información sobre la versión y termina\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional utiliza el formato de saludo tradicional\n"
-" -n, --next-generation utiliza el formato de saludo más novedoso\n"
-" -g, --greeting=TEXTO utiliza TEXTO como mensaje de saludo\n"
-
-# Nota: Edsger W. Dijkstra tiene un artículo muy interesante en el que explica, entre otras cosas,
-# por qué no debe llamarse "bugs" (en inglés) a los errores de los programas.
-#
-# Véase "On the cruelty of really teaching computing science" en esta dirección:
-#
-# http://www.cs.utexas.edu/users/EWD/transcriptions/EWD10xx/EWD1036.html
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Comunicar errores en el programa a: %s\n"
-"Comunicar errores de traducción a es@li.org y al último traductor.\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Comunicar errores de %s a: %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s página inicial: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s página inicial: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Ayuda general sobre el uso de software de GNU: <http://www.gnu.org/gethelp/"
-">\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"Licencia GPLv3+: GPL de GNU versión 3 o posterior <http://gnu.org/licenses/"
-"gpl.html>\n"
-"Esto es software libre, usted es libre de cambiarlo y redistribuirlo.\n"
-"No hay NINGUNA GARANTÍA, hasta donde permite la ley.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Error del sistema desconocido"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: la opción '%s' es ambigua\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: la opción '--%s' no admite ningún argumento\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: la opción '%c%s' no admite ningún argumento\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: la opción '--%s' requiere un argumento\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: opción no reconocida '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: opción no reconocida '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: opción inválida -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: la opción requiere un argumento -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: la opción '-W %s' es ambigua\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: la opción '-W %s' no admite ningún argumento\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: la opción '-W %s' requiere un argumento\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "error de escritura"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "«"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "»"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "memoria agotada"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: opción ilegal -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Demasiados argumentos\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, EL programa que imprime un saludo.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "No hay NINGUNA garantía; ni siquiera de COMERCIABILIDAD o IDONEIDAD PARA "
-#~ "UN\n"
-#~ "FIN DETERMINADO. Se pueden redistribuir copias de GNU %s bajo los "
-#~ "términos\n"
-#~ "de la Licencia Pública General de GNU.\n"
-#~ "Para más información sobre estas cuestiones, vea el fichero llamado "
-#~ "COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Opciones incompatibles: -m y -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: ¿Quién es usted?\n"
-
-# Sé que habría que buscar alguna otra palabra para `spool', pero ahora
-# mismo no se me ocurre ninguna apropiada, *y que además se entienda*.
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: No se puede encontrar el fichero de `spool' de su correo.\n"
-
-# Sugerencia: No sucede, no ocurre. sv
-# preferiría mantener la informalidad. jr
-#~ msgid "Nothing happens here."
-#~ msgstr "Aquí no pasa nada."
+++ /dev/null
-# This file is distributed under the same license as the hello package.
-# Estonian translations for GNU hello.
-# Copyright (C) 2001 Free Software Foundation, Inc.
-# Toomas Soome <Toomas.Soome@microlink.ee>, 2011.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.6.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-03-23 21:51+0200\n"
-"Last-Translator: Toomas Soome <Toomas.Soome@microlink.ee>\n"
-"Language-Team: Estonian <linux-ee@lists.eenet.ee>\n"
-"Language: et\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-15\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: liigne operand: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Lisainfo saamiseks proovige `%s --help'\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "tere kõik\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+-----------+\n"
-"| Tere kõik |\n"
-"+-----------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Tere kõik!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Kasuta: %s [VÕTI]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Väljasta sõbralik, muudetav tervitus.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help esita see abiinfo ja lõpeta töö\n"
-" -v, --version esita versiooniinfo ja lõpeta töö\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional kasuta traditsionaalset tervituse vormi\n"
-" -n, --next-generation kasuta järgmise põlvkonna tervituse vormi\n"
-" -g, --greeting=TEKST määra tervitustekst\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Palun teatage vigadest aadressil: %s\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Palun teatage %s vigadest aadressil: %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s kodulehekülg: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s kodulehekülg: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr "Üldine abiinfo GNU tarkvara kohta: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Autoriõigus (C) %s Free Software Foundation, Inc.\n"
-"Litsents GPLv3+: GNU GPL versioon 3 või uuem <http://www.gnu.org/licenses/"
-"gpl.html>\n"
-"See on vaba tarkvara. Garantii puudub vastavalt seadustega määratud "
-"piiridele.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Tundmatu süsteemi viga"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: võti '%s' on segane\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: võti '--%s' ei luba argumenti\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: võti '%c%s' ei luba argumenti\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: võti '--%s' nõuab argumenti\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: tundmatu võti '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: tundmatu võti '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: vigane võti -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: võti nõuab argumenti -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: võti '-W %s' on segane\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: võti '-W %s' ei luba argumenti\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: võti '-W %s' nõuab argumenti\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "viga kirjutamisel"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "`"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "'"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "mälu on otsas"
+++ /dev/null
-# Basque translation of hello.
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Mikel Olasagasti <hey_neken@euskal.org>, 2003.
-# , fuzzy
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.1.1\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2012-04-19 00:30+0100\n"
-"Last-Translator: Mikel Olasagasti <hey_neken@euskal.org>\n"
-"Language-Team: Basque <linux-eu@chanae.alphanet.ch>\n"
-"Language: eu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Saiatu `%s --help' -rekin informazio gehiagorako.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "kaixo, mundu\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| Kaixo, mundu! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Kaixo, mundu!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Erabilpena: %s [AUKERA]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help laguntza hau erakutsi eta irten egiten da\n"
-" -v, --version bertsioari buruzko informazioa erakutsi eta irten "
-"egiten da\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional ongi etorri formatu tradizionala erabili\n"
-" -n, --next-generation hurrengo generazioko ongi etorri formatua erabili\n"
-" -m, --mail zure mail-a erakutsi\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Bug-ak <%s>ra bidali.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Bug-ak <%s>ra bidali.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: `%s' aukera anbiguoa da\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: `--%s' aukerak ez du argudiorik onartzen\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: `%c%s' aukerak ez du argudiorik onartzen\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: `%s' aukerak argudio bat behar du\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: aukera ezezaguna `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: aukera ezezaguna `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: legez kanpoko aukera -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: aukerak argudio bat behar du -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: `-W %s' aukera anbiguoa da\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: `-W %s' aukerak ez du argudiorik onartzen\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: `%s' aukerak argudio bat behar du\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: Memori birtuala agortua\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: legez kanpoko aukera -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Argumentu gehiegi\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, ongietorri programa.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "EZ dago inolako bermerik, ez MERKATARITZA ezta ASMO BEREZI BATEN\n"
-#~ "EGOKITASUNERAKO. GNU %sren kopiak GNUren GPL baldintzapean egini behar "
-#~ "duzu.\n"
-#~ "Gai honi buruz informazio gehiago nahi baduzu, ikusi COPYING fitxategia.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Bandera bateraezina: -m eta -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Nor zara zu?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Ezin da zure mail spool fitxategia aurkitu.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Ez da ezer gertatzen hemen."
+++ /dev/null
-# Persian translation for GNU hello messages.
-# Copyright (C) 2002 Free Software Foundation, Inc.
-# Behdad Esfahbod <trans@behdad.org>, 2002.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.1.1\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2002-12-06 22:50+0350\n"
-"Last-Translator: Behdad Esfahbod <trans@behdad.org>\n"
-"Language-Team: Persian <translation-team-fa@lists.sourceforge.net>\n"
-"Language: fa\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "برای اطلاعات بیشتر «%s --help» را امتحان کنید.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "سلام بر همه\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"╔══════════════╗\n"
-"║ سلام بر همه! ║\n"
-"╚══════════════╝\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "سلام بر همه!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "روش استفاده: %s [گزینه]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h، --help این راهنما را نشان میدهد و خارج میشود\n"
-" -v، --version شمارهی نسخه را نشان میدهد و خارج میشود\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t، --traditional استفاده از قالب خوشآمدگویی سنتی\n"
-" -n، --next-generation استفاده از قالب خوشآمدگویی نسل جدید\n"
-" -m، --mail چاپ نامههایتان\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"اشکالهای برنامه را به <%s>، و اشکالهای\n"
-"ترجمه را به <translation-team-fa@lists.sourceforge.net> گزارش دهید.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"اشکالهای برنامه را به <%s>، و اشکالهای\n"
-"ترجمه را به <translation-team-fa@lists.sourceforge.net> گزارش دهید.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: گزینهی «%s» مبهم است\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: گزینهی «--%s» آرگومان نمیپذیرد\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: گزینهی «%c%s» آرگومان نمیپذیرد\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: گزینهی «%s» آرگومان لازم دارد\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: گزینهی «--%s» شناخته نشد\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: گزینهی «%c%s» شناخته نشد\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: گزینهی نامعتبر -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: گزینه آرگومان لازم دارد -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: گزینهی «-W %s» مبهم است\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: گزینهی «-W %s» آرگومان نمیپذیرد\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: گزینهی «%s» آرگومان لازم دارد\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: حافظهی مجازی تمام شد\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: گزینهی غیرمجاز -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "آرگومانها خیلی زیادند\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "گنو سلام، برنامهی خوشآمدگویی.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "این نرمافزار هیچگونه تضمینی نمیشود؛ حتی تضمین «قابل فروش بودن» یا\n"
-#~ "«مناسب کار خاصی بودن». شما مجازید کپیهای گنو %s را تحت\n"
-#~ "شرایط مندرج در اجازهنامهی عمومی گنو توزیع کنید.\n"
-#~ "برای اطلاعات بیشتر در این موارد، پروندهی COPYING را ببینید.\n"
-
-# "حق کپی (ح) (%s) برای بنیاد نرمافزارهای آزاد محفوظ است.\n"
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: گزینههای ناسازگار: -m و -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: شما کی هستید؟\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: پروندهی نامههای شما یافت نشد.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "اتفاقی نمیافتد."
+++ /dev/null
-# Finnish messages for GNU hello
-# This file is distributed under the same license as the hello package.
-# Copyright (C) 2000, 2001, 2002, 2006, 2007, 2010 Free Software Foundation, Inc.
-# Tommi Vainikainen <Tommi.Vainikainen@iki.fi>, 2000, 2001, 2002, 2006, 2007, 2010.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.4.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2010-02-01 10:29+0200\n"
-"Last-Translator: Tommi Vainikainen <Tommi.Vainikainen@iki.fi>\n"
-"Language-Team: Finnish <translation-team-fi@lists.sourceforge.net>\n"
-"Language: fi\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: lisätoiminto: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Lisätietoja saat komennolla \"%s --help\"\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "terve maailma\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"[Huom: Parhaan näkymän saat käyttämällä UTF-8-merkistöä.]\n"
-"┌────────────────┐\n"
-"│ Terve maailma! │\n"
-"└────────────────┘\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Terve maailma!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Käyttö: %s [VALITSIN]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Tulosta ystävällinen, muokattava tervehdys.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help näyttää tämän ohjeen ja poistuu\n"
-" -v, --version näyttää versiotiedot ja poistuu\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional käyttää perinteistä tervehdysmuotoa\n"
-" -n, --next-generation käyttää uuden polven tervehdysmuotoa\n"
-" -g, --greeting=TEKSTI käyttää TEKSTIä tervehdyksenä\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Kerro vioista (englanniksi) osoitteeseen: %s\n"
-"Suomennoksen vioista voit ilmoittaa listalle <translation-team-fi@lists."
-"sourceforge.net>.\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Kerro %s-vioista (englanniksi) osoitteeseen: %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s-kotisivu: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s-kotisivu: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Yleisiä ohjeita GNU-ohjelmistojen käytöstä: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright © %s Free Software Foundation, Inc.\n"
-"Lisenssi GPLv3+: GNU GPL versio 3 tai uudempi <http://gnu.org/licenses/gpl."
-"html>\n"
-"Tämä on vapaa ohjelmisto: sinulla on vapaus muuttaa tai levittää tätä.\n"
-"Tälle ohjelmistolle EI myönnetä takuuta lain sallimissa rajoissa.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Tuntematon järjestelmävirhe"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: valitsin ”%s” on monitulkintainen\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: valitsin ”--%s” ei salli argumenttia\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: valitsin ”%c%s” ei salli argumenttia\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: valitsin ”%s” tarvitsee argumentin\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: tuntematon valitsin ”--%s”\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: tuntematon valitsin ”%c%s”\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: virheellinen valitsin -- ”%c”\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: valitsin tarvitsee argumentin -- ”%c”\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: valitsin ”-W %s” on monitulkintainen\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: valitsin ”-W %s” ei salli argumenttia\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: valitsin ”%s” tarvitsee argumentin\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "kirjoitusvirhe"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "”"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "”"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "muisti loppui"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: virheellinen valitsin -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Liian monta argumenttia\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, SE tervehdyksen tulostusohjelma.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "Takuuta EI ole; ei edes MYYNTIKUNNOSTA tai SOVELTUVUUDESTA TIETTYYN\n"
-#~ "TARKOITUKSEEN. Voit levittää GNU %s:sta kopioita GNU General Public\n"
-#~ "Licensen mukaisesti.\n"
-#~ "Tiedostosta COPYING löydät lisätietoja näistä seikoista.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Valintaliput -m ja -t eivät sovi yhteen\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Kuka olet?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Sähköpostilaatikkoasi ei löydy.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Täällä ei tapahdu mitään."
+++ /dev/null
-# Messages français pour GNU concernant hello.
-# Copyright © 2004 Free Software Foundation, Inc.
-# Michel Robitaille <robitail@IRO.UMontreal.CA>, traducteur depuis/since 1996.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.0.50\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2004-05-10 08:00-0500\n"
-"Last-Translator: Michel Robitaille <robitail@IRO.UMontreal.CA>\n"
-"Language-Team: French <traduc@traduc.org>\n"
-"Language: fr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8-bit\n"
-"Plural-Forms: nplurals=2; plural=(n > 1);\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Pour plus d'informations, faire: « %s --help ».\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "Bonjour, le monde.\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+--------------------+\n"
-"| Bonjour, le monde! |\n"
-"+--------------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Bonjour, le monde!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Usage: %s [OPTION]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help afficher l'aide-mémoire\n"
-" -v, --version afficher le nom et la version du logiciel\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional utiliser le format traditionnel de salutations\n"
-" -n, --next-generation utiliser le format de nouvelle génération pour les "
-"salutations\n"
-" -m, --mail lire votre courrier\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Rapporter toutes anomalies à <%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Rapporter toutes anomalies à <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: l'option « %s » est ambiguë.\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: l'option « --%s » ne permet pas un autre paramètre.\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: l'option « %c%s » ne permet pas un autre paramètre.\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: l'option « %s » requiert un paramètre.\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: l'option « --%s » n'est pas reconnue.\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: l'option « %c%s » n'est pas reconnue.\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: l'option -- %c est invalide.\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: l'option -- %c requiert un paramètre.\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: l'option « -W %s » est ambiguë.\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: l'option « -W %s » ne permet pas un autre paramètre.\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: l'option « %s » requiert un paramètre.\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: mémoire virtuelle épuisée\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: l'option -- %c est illégale.\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Trop de paramètres.\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, LE programme de salutations et de bienvenue.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright © %s Free Software Foundation, Inc.\n"
-#~ "AUCUNE garantie n'est donnée; tant pour des raisons COMMERCIALES que\n"
-#~ "pour RÉPONDRE À UN BESOIN PARTICULIER. Vous pouvez redistribuer des "
-#~ "copies\n"
-#~ "du progiciel %s de GNU selon les termes de la licence\n"
-#~ "GNU General Public License.\n"
-#~ "Pour plus d'informations, consulter le fichier COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: options incompatibles: -m et -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Qui êtes-vous?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: ne peut repérer votre fichier de boîte aux lettres.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Aucune activité ne s'est produite."
-
-#~ msgid ""
-#~ "GNU hello, THE greeting printing program.\n"
-#~ "\n"
-#~ "Usage: %s [OPTION]\n"
-#~ "\n"
-#~ " -h, --help display this help and exit\n"
-#~ " -v, --version display version information and exit\n"
-#~ " -t, --traditional use traditional greeting format\n"
-#~ " -m, --mail print your mail\n"
-#~ "\n"
-#~ "Report bugs to bug-gnu-hello@prep.ai.mit.edu.\n"
-#~ msgstr ""
-#~ "Le logiciel Hello de GNU, LE programme de Bienvenue.\n"
-#~ "\n"
-#~ "Usage: %s [OPTION]\n"
-#~ " -h, --help afficher l'aide-mémoire\n"
-#~ " -v, --version afficher le nom et la version du logiciel\n"
-#~ " -t, --traditional utiliser le format traditionnel de salutations\n"
-#~ " -m, --mail afficher le courrier\n"
-#~ "\n"
-#~ "Rapporter toutes anomalies à bug-gnu-hello@gnu.ai.mit.edu.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "This is free software; see the source for copying conditions. There is "
-#~ "NO\n"
-#~ "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR "
-#~ "PURPOSE.\n"
-#~ msgstr ""
-#~ "Copyright © %s Free Software Foundation, Inc.\n"
-#~ "Ce logiciel est libre; voir les sources pour les conditions de\n"
-#~ "reproduction. AUCUNE garantie n'est donnée; tant pour des raisons\n"
-#~ "COMMERCIALES que pour RÉPONDRE À UN BESOIN PARTICULIER.\n"
+++ /dev/null
-# Irish translations for hello.
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Kevin Patrick Scannell <scannell@SLU.EDU>, 2003, 2006, 2007.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.3\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2007-07-04 15:48-0500\n"
-"Last-Translator: Kevin Scannell <kscanne@gmail.com>\n"
-"Language-Team: Irish <gaeilge-gnulinux@lists.sourceforge.net>\n"
-"Language: ga\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: oibreann breise: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Bain triail as `%s --help' chun tuilleadh eolais a fháil.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "Dia duit, a dhomhain\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+-----------------------+\n"
-"| Dia duit, a dhomhain! |\n"
-"+-----------------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Dia duit, a dhomhain!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Úsáid: %s [ROGHA]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Priontáil beannacht chairdiúil in-saincheaptha.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help taispeáin an chabhair seo agus scoir\n"
-" -v, --version taispeáin eolas faoin leagan agus scoir\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional bain úsáid as beannacht ar an sean-nós\n"
-" -n, --next-generation bain úsáid as beannacht nua-aoiseach\n"
-" -g, --greeting=TCHT úsáid TCHT mar an bheannacht\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Seol tuairiscí fabhtanna chuig <%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Seol tuairiscí fabhtanna chuig <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright © %s Free Software Foundation, Inc.\n"
-"Ceadúnas: GNU GPLv3+ GNU GPL, leagan 3 nó níos nuaí <http://gnu.org/licenses/"
-"gpl.html>\n"
-"Is saorbhogearra é seo: ceadaítear duit é a athrú agus a athdháileadh.\n"
-"Níl baránta AR BITH ann, an oiread atá ceadaithe de réir dlí.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Earráid anaithnid chórais"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: Tá an rogha `%s' débhríoch\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: ní cheadaítear argóint i ndiaidh na rogha `--%s'\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: ní cheadaítear argóint i ndiaidh na rogha `%c%s'\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: tá argóint de dhíth i ndiaidh na rogha `%s'\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: rogha anaithnid `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: rogha anaithnid `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: rogha neamhbhailí -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: tá argóint de dhíth i ndiaidh na rogha -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: Tá an rogha `-W %s' débhríoch\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: ní cheadaítear argóint i ndiaidh na rogha `-W %s'\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: tá argóint de dhíth i ndiaidh na rogha `%s'\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "earráid sa scríobh"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "`"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "'"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "cuimhne ídithe"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: rogha neamhcheadaithe -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "An iomarca argóintí\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, níl ríomhchlár eile chun priontáil beannachtaí!\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Bratacha éaguibhreannacha: -m agus -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Cé thú féin?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Ní féidir an comhad a fháil a bhfuil do spól poist ann.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Ní tharlaíonn dada anseo."
+++ /dev/null
-# Galician translation of GNU Hello.
-# Copyright (C) 2001 Free Software Foundation, Inc.
-# Jacobo Tarrio <jtarrio@iname.com>, 2001.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.0.50\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2002-03-18 17:00+0100\n"
-"Last-Translator: Jacobo Tarrio <jtarrio@iname.com>\n"
-"Language-Team: Galician <gpul-traduccion@ceu.fi.udc.es>\n"
-"Language: gl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Escriba `%s --help' para obter máis información.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "ola, mundo\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+--------------+\n"
-"| ¡Ola, mundo! |\n"
-"+--------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "¡Ola, mundo!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Emprego: %s [OPCIÓN]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help amosar esta axuda e saír\n"
-" -v, --version amosar información sobre a versión e saír\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional emprega-lo formato de saúdo tradicional\n"
-" -n, --next-generation emprega-lo formato de saúdo da nova xeración\n"
-" -m, --mail amosa-lo correo\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Informe dos erros no programa a <%s>.\n"
-"Informe dos erros na traducción a <proxecto@trasno.net>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Informe dos erros no programa a <%s>.\n"
-"Informe dos erros na traducción a <proxecto@trasno.net>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: a opción `%s' é ambigua\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: a opción `--%s' non admite un argumento\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: a opción `%c%s' non admite un argumento\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: a opción `%s' precisa dun argumento\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: opción `--%s' non recoñecida\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: opción `%c%s' non recoñecida\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: opción non válida -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: a opción precisa dun argumento -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: a opción `-W %s' é ambigua\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: a opción `-W %s' non admite un argumento\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: a opción `%s' precisa dun argumento\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: Memoria virtual esgotada\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: opción non válida -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Demasiados argumentos\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, *O* programa que amosa saúdos.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "Non hai NINGUNHA garantía; nin sequera a de COMERCIABILIDADE ou\n"
-#~ "APTITUDE PARA UN FIN DETERMINADO. Pode redistribuír copias de GNU %s\n"
-#~ "baixo os termos da Licencia Pública Xeral de GNU.\n"
-#~ "Para obter máis información sobre estes temas, vexa o ficheiro chamado "
-#~ "COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Modificadores incompatibles: -m e -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: ¿Quen é vostede?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Non se puido atopa-lo ficheiro co correo.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Aquí non pasa nada."
+++ /dev/null
-# Hebrew messages for GNU Hello -*- coding: hebrew-iso-8bit -*-
-# Copyright (C) 2002 Free Software Foundation, Inc.
-# Eli Zaretskii <eliz@is.elta.co.il>, 2002.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.0.50\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2002-02-02 21:35+0200\n"
-"Last-Translator: Eli Zaretskii <eliz@gnu.org>\n"
-"Language-Team: Hebrew <eliz@gnu.org>\n"
-"Language: he\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr ".øúåé áø òãéî úâöäì `%s --help' ùé÷äì äñð\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "!íìåòä ìëì íåìù\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+-----------------+\n"
-"| !íìåòä ìëì íåìù |\n"
-"+-----------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "!íìåòä ìëì íåìù"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "%s [íéðééôàî] :ùåîéù ïôåà\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" .úéðëåúäî àöå äæ äøæò êñî âöä -h, --help\n"
-" .úéðëåúäî àöå úéðëúä úñøéâ úà âöä -v, --version\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" .éúøåñî èîøåôá äëøá âöä -t, --traditional\n"
-" .àáä øåãä èîøåôá äëøá âöä -n, --next-generation\n"
-" .êìù éðåøè÷ìàä øàãä úà âöä -m, --mail\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr ".<%s> úáåúëì úåì÷ú ìò íéçååéã çåìùì àð\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ".<%s> úáåúëì úåì÷ú ìò íéçååéã çåìùì àð\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s úéðëú øåáò éòîùî-ãç åðéà `%s' ïééôàî\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s úéðëú øåáò èðîåâøà ìá÷î åðéà `--%s' ïééôàî\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s úéðëú øåáò èðîåâøà ìá÷î åðéà `%c%s' ïééôàî\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s úéðëú øåáò èðîåâøà áééçî `%s' ïééôàî\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s úéðëú øåáò `--%s' ääåæî-éúìá ïééôàî\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s úéðëú øåáò `%c%s' ääåæî-éúìá ïééôàî\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s úéðëú øåáò éåâù ïééôàî -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: èðîåâøà áééçî ïééôàî -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s úéðëú øåáò éòîùî-ãç åðéà `-W %s' ïééôàî\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s úéðëú øåáò èðîåâøà ìá÷î åðéà `-W %s' ïééôàî\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s úéðëú øåáò èðîåâøà áééçî `%s' ïééôàî\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s úéðëú øåáò éìàèøéåä ïåøëæä øîâð\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: é÷åç-éúìá ïééôàî -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "íéèðîåâøà éãî øúåé\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr ".äëøá úñôãäì úåéðëåúä íà ,GNU hello\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ " Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ " .òîúùîá-úåéøçà àì åìéôà ;àåäùìë úåéøçà áúëá äååìî äðéà åæ úéðëåú\n"
-#~ " åæ GNU %s õéôäì íëúåëæ .úîéåñî úéìëú åæéàì äîàúä åà úåøéçñ ìù\n"
-#~ " .GNU General Public License ïåéùøä éàðúì íàúäá\n"
-#~ " .COPYING õáå÷á åðééò ,åìà íéðéðòá èåøéô øúéì\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s úéðëåú øåáò -t íâå -m íâ ïééöì ïúéð àì\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "?äúà éîå ,%s\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr ".êìù øàãä àú õáå÷ úà àåöîì äìåëé äðéà %s\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr ".ïàë äøå÷ åðéà øáã"
+++ /dev/null
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.8\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr ""
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr ""
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr ""
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr ""
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr ""
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr ""
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr ""
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr ""
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr ""
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr ""
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr ""
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr ""
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr ""
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr ""
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr ""
+++ /dev/null
-# GNU hello program .po translation file for hr_HR locale
-# Copyright (C) 2002 Free Software Foundation, Inc.
-# Mirsad Todorovac <mtodorov_69@yahoo.com>, 2002.
-# ... whishes to thank everybody who helped in good faith -- TM
-#
-# This file is distributed under the same license as the hello package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.0.50\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2002-04-30 11:59+MET/DST (UTC+2)\n"
-"Last-Translator: Mirsad Todorovac <mtodorov_69@yahoo.com>\n"
-"Language-Team: Croatian <lokalizacija@linux.hr>\n"
-"Language: hr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Poku¹aj `%s --help' za vi¹e informacija.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "pozdrav, svijete\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+-------------------+\n"
-"| Pozdrav, svijete! |\n"
-"+-------------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Pozdrav, svijete!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Kori¹tenje: %s [OPCIJA]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help prika¾i ovu pomoæ i zavr¹i s radom.\n"
-" -v, --version prika¾i informaciju o verziji programa i zavr¹i.\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional koristi tradicionalni pozdravni format\n"
-" -n, --next-generation koristi pozdravni format slijedeæe generacije\n"
-" -m, --mail pogledaj svoj e-mail\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Prijavi pogre¹ke i bugove na adresu <%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Prijavi pogre¹ke i bugove na adresu <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: opcija `%s' nije jednoznaèna\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: opcija `--%s' ne dozvoljava argument\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: opcija `%c%s' ne dozvoljava argument\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: opcija `%s' zahtijeva neophodan argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: ne prepoznajem opciju `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: ne prepoznajem opciju `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: pogre¹na opcija -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: opcija zahtijeva neophodan argument -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: opcija `-W %s' nije jednoznaèna\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: opcija `-W %s' ne dozvoljava argument\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: opcija `%s' zahtijeva neophodan argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: Iscrpljena virtualna memorija\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: ilegalna opcija -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Prevelik broj argumenata\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, pozdravni program.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ "\n"
-#~ "Ovaj program dolazi BEZ GARANCIJA; èak niti za njegovu korisnost niti\n"
-#~ "pogodnost za pojedine namjene. Mo¾ete redistribuirati kopije programa\n"
-#~ "pod uvjetima GNU Opæe Javne Licence.\n"
-#~ "Za vi¹e informacija o ovim stvarima, pogledajte datoteku COPYING\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Nekompatibilne zastavice: -m i -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Tko si ti?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Ne mogu pronaæi tvoj po¹tanski sanduèiæ (mailbox).\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Ni¹ta se ne dogaða."
+++ /dev/null
-# Hungarian translation for GNU hello.
-# Copyright (C) 2001, 2010 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Emese Kovács <emese@sunserv.itp.hu>, 2001.
-# Emese Kovács <emese@instantweb.hu>, 2010.
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.4.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2010-10-19 16:37+0000\n"
-"Last-Translator: Emese Kovács <emese@instantweb.hu>\n"
-"Language-Team: Hungarian <translation-team-hu@lists.sourceforge.net>\n"
-"Language: hu\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=utf-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: extra paraméter: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Próbáld a `%s --help'-et.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "Szia világ!\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| Szia világ! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Szia világ!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Használat: %s [KAPCSOLÓ]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Kedves, testreszabható üdvözletet ír ki.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help emlékeztetőt ír ki\n"
-" -v, --version kiírja a program nevét és verzióját\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional hagyományos üdvözlet\n"
-" -n, --next-generation következő generációs üdvözlet\n"
-" -g, --greeting=SZÖVEG a SZÖVEGben megadott üdvözleltet használja\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"A program hibáit a következő címen jelentheted: <%s>.\n"
-"A fordítással kapcsolatos észrevételeket a \n"
-"<translation-team-hu@lists.sourceforge.net> címre várjuk.\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "A program %s hibáit a következő címen jelentheted: <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s weblap: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s weblap: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Általános segítség a GNU programokkal kapcsolatban:\n"
-"<http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"GPLv3+ licenc: GNU GPL3 vagy későbbi változat <http://gnu.org/licenses/gpl."
-"html>\n"
-"Ez szabad szoftver: nyugodtan módosítsd és add tovább.\n"
-"NINCS GARANCIA, már amennyire ezt a törvény engedi.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Ismeretlen rendszerhiba"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: '%s' kapcsoló nem egyértelmű\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: a '--%s' kapcsoló nem fogad el argumentumot\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: a '%c%s' kapcsoló nem fogad el argumentumot\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: a '%s' kapcsoló argumentumot igényel\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: ismeretlen kapcsoló: '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: ismeretlen kapcsoló: '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: érvénytelen kapcsoló -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: a kapcsoló argumentumot igényel -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: a '-W %s' kapcsoló nem egyértelmű\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: a '-W %s' kapcsoló nem fogad el argumentumot\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: a '%s' kapcsoló argumentumot igényel\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "iráshiba"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "U+201E"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "U+201d"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "memória elfogyott"
+++ /dev/null
-# translation of hello-2.1.91.po to Indonesian
-# hello 2.4.90
-# Copyright (C) 1999, 2000, 2001, 2002, 2006 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-#
-# Tedi Heriyanto <tedi_h@gmx.net>, 1999, 2002.
-# Tedi Heriyanto <tedi_heriyanto@yahoo.com>, 2006.
-# Arif E. Nugroho <arif_endro@yahoo.com>, 2008, 2010.
-msgid ""
-msgstr ""
-"Project-Id-Version: hello-2.4.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2010-02-01 17:30+0700\n"
-"Last-Translator: Arif E. Nugroho <arif_endro@yahoo.com>\n"
-"Language-Team: Indonesian <translation-team-id@lists.sourceforge.net>\n"
-"Language: id\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: kelebihan operand: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Coba `%s --help' untuk informasi lebih jauh.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "halo, dunia\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| Halo, dunia! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Halo, dunia!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Pemakaian: %s [PILIHAN]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Tampilkan sebuah salam yang bersahabat dan dapat diubah ubah.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help tampilkan bantuan ini dan keluar\n"
-" -v, --version tampilkan informasi versi dan keluar\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional gunakan format ucapan tradisional\n"
-" -n, --next-generation gunakan format ucapan generasi baru\n"
-" -g, --greeting=TEXT gunakan TEXT sebagai pesan ucapan\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Laporkan bug ke: %s\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Laporkan %s bug ke: %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s halaman rumah: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s halaman rumah: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Batuan umum menggunakan perangkat lunak GNU: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Hak Cipta (C) %s Free Software Foundation, Inc.\n"
-"Lisensi GPLv3+: GNU GPL versi 3 atau selanjutnya <http://www.gnu.org/"
-"licenses/gpl.html>\n"
-"Ini adalah piranti lunak bebas. Anda bebas untuk mengubah dan "
-"meredistribusikannya.\n"
-"TIDAK ADA GARANSI, sampai batas yang diijinkan oleh hukum yang berlaku.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Kesalahan sistem tidak dikenal"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: pilihan '%s' rancu\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: pilihan '--%s' tidak membolehkan sebuah argumen\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: pilihan '%c%s' tidak membolehkan sebuah argumen\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: pilihan '%s' membutuhkan sebuah argumen\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: pilihan tidak dikenal '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: pilihan tidak dikenal '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: pilihan tidak valid -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: pilihan membutuhkan sebuah argumen -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: pilihan '-W %s' ambigu\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: pilihan '-W %s' tidak membolehkan ada argumen\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: pilihan '%s' membutuhkan sebuah argumen\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "kesalahan penulisan"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "`"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "'"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "memori habis"
-
-#~ msgid "helloPILIHANworld\n"
-#~ msgstr "halo, dunia\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: pilihan ilegal -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Terlalu banyak argumen\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, Program pencetak salam.\n"
+++ /dev/null
-# Sed script that inserts the file called HEADER before the header entry.
-#
-# At each occurrence of a line starting with "msgid ", we execute the following
-# commands. At the first occurrence, insert the file. At the following
-# occurrences, do nothing. The distinction between the first and the following
-# occurrences is achieved by looking at the hold space.
-/^msgid /{
-x
-# Test if the hold space is empty.
-s/m/m/
-ta
-# Yes it was empty. First occurrence. Read the file.
-r HEADER
-# Output the file's contents by reading the next line. But don't lose the
-# current line while doing this.
-g
-N
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
+++ /dev/null
-# Italian messages for hello
-# Copyright (C) 1998, 2000, 2001 Free Software Foundation, Inc.
-# Giovanni Bortolozzo <borto@pluto.linux.it>, 1998-2000
-# Marco d'Itri <md@linux.it>, 2001.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 1.3.37\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2002-02-01 12:17+0100\n"
-"Last-Translator: Marco d'Itri <md@linux.it>\n"
-"Language-Team: Italian <tp@lists.linux.it>\n"
-"Language: it\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Usare `%s --help' per ulteriori informazioni.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "salve, mondo\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| Salve, mondo! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Salve, mondo!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Uso: %s [OPZIONI]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help mostra questo aiuto ed esce\n"
-" -v, --version mostra informazioni sulla versione ed esce\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional usa il formato di saluto tradizionale\n"
-" -n, --next-generation usa il formato di saluto di nuova generazione\n"
-" -m, --mail mostra la tua posta\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Segnalare i bug a <%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Segnalare i bug a <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: l'opzione `%s' è ambigua\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: l'opzione `--%s' non ammette un argomento\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: l'opzione `%c%s' non ammette un argomento\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: l'opzione `%s' richiede un argomento\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: `--%s' opzione non riconosciuta\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: `%c%s' opzione non riconosciuta\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: opzione non valida -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: l'opzione richiede un argomento -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: l'opzione `-W %s' è ambigua\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: l'opzione `-W %s' non ammette un argomento\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: l'opzione `%s' richiede un argomento\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: Memoria virtuale esaurita\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: opzione illegale -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Troppi argomenti\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, IL programma che stampa i saluti.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "NON c'è garanzia; neppure per la COMMERCIABILITÀ o l'ADATTAMENTO AD UN\n"
-#~ "PARTICOLARE SCOPO. È possibile redistribuire copie di GNU %s nei\n"
-#~ "termini della GNU General Public License.\n"
-#~ "Per maggiori informazioni su queste cose, vedere il file COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Opzioni incompatibili: -m e -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Chi sei?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Impossibile trovare il tuo file di spool della posta.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Qui non succede niente."
+++ /dev/null
-# Japanese messages GNU hello
-# Copyright (C) 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-# IIDA Yosiaki <iida@gnu.org>, 1999, 2000, 2001, 2002.
-# This file is distributed under the same license as the hello package.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.0.50\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2002-02-08 12:19+09:00\n"
-"Last-Translator: IIDA Yosiaki <iida@gnu.org>\n"
-"Language-Team: Japanese <ja@li.org>\n"
-"Language: ja\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=EUC-JP\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "`%s --help' ¤Ç¡¢¤è¤ê¾ÜºÙ¤Ê¾ðÊó¤òÄ´¤Ù¤Æ¤ß¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "À¤³¦¤è¡¢¤³¤ó¤Ë¤Á¤Ï\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"¨®¨¬¨¬¨¬¨¬¨¬¨¬¨¬¨¬¨¬¨¬¨¯\n"
-"¨À¤³¦¤è¡¢¤³¤ó¤Ë¤Á¤Ï¡ª¨\n"
-"¨±¨¬¨¬¨¬¨¬¨¬¨¬¨¬¨¬¨¬¨¬¨°\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "À¤³¦¤è¡¢¤³¤ó¤Ë¤Á¤Ï¡ª"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "»ÈÍÑË¡: %s [¥ª¥×¥·¥ç¥ó]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help ¤³¤Î¥á¥Ã¥»¡¼¥¸¤òɽ¼¨¤·¤Æ¡¢½ªÎ»¤·¤Þ¤¹\n"
-" -v, --version ¥Ð¡¼¥¸¥ç¥ó¾ðÊó¤òɽ¼¨¤·¤Æ¡¢½ªÎ»¤·¤Þ¤¹\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional ÅÁÅýŪ¤Ê¤¢¤¤¤µ¤Ä¤Î½ñ¼°¤ò»È¤¤¤Þ¤¹\n"
-" -n, --next-generation ¼¡À¤Âå¤Î¤¢¤¤¤µ¤Ä¤Î½ñ¼°¤ò»È¤¤¤Þ¤¹\n"
-" -m, --mail ¤¢¤Ê¤¿¤Ø¤Î¥á¡¼¥ë¤òɽ¼¨¤·¤Þ¤¹\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"¥Ð¥°¤ò¸«¤Ä¤±¤¿¤é <%s> ¤ËÊó¹ð¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"ÆüËܸì¤Î¸íÌõ¤Ï <ja@li.org> ¤ËÊó¹ð¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"¥Ð¥°¤ò¸«¤Ä¤±¤¿¤é <%s> ¤ËÊó¹ð¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-"ÆüËܸì¤Î¸íÌõ¤Ï <ja@li.org> ¤ËÊó¹ð¤·¤Æ¤¯¤À¤µ¤¤¡£\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: ¥ª¥×¥·¥ç¥ó `%s' ¤ÏÛ£Ëæ¤Ç¤¹\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: ¥ª¥×¥·¥ç¥ó `--%s' ¤Ï°ú¿ô¤ò¼õ¤±ÉÕ¤±¤Þ¤»¤ó\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: ¥ª¥×¥·¥ç¥ó `%c%s' ¤Ï°ú¿ô¤ò¼õ¤±ÉÕ¤±¤Þ¤»¤ó\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: ¥ª¥×¥·¥ç¥ó `%s' ¤Ë¤Ï°ú¿ô¤¬É¬ÍפǤ¹\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: ǧ¼±¤Ç¤¤Ê¤¤¥ª¥×¥·¥ç¥ó `--%s' ¤Ç¤¹\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: ǧ¼±¤Ç¤¤Ê¤¤¥ª¥×¥·¥ç¥ó `%c%s' ¤Ç¤¹\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: ̵¸ú¤Ê¥ª¥×¥·¥ç¥ó¤Ç¤¹ -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: ¥ª¥×¥·¥ç¥ó¤Ï°ú¿ô¤òÍ׵ᤷ¤Þ¤¹ -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: ¥ª¥×¥·¥ç¥ó `-W %s' ¤ÏÛ£Ëæ¤Ç¤¹\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: ¥ª¥×¥·¥ç¥ó `-W %s' ¤Ï¡¢°ú¿ô¤ò¼õ¤±ÉÕ¤±¤Þ¤»¤ó\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: ¥ª¥×¥·¥ç¥ó `%s' ¤Ë¤Ï°ú¿ô¤¬É¬ÍפǤ¹\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: ²¾ÁÛ¥á¥â¥ê¤ò»È¤¤²Ì¤¿¤·¤Þ¤·¤¿\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: ÉÔÀµ¤Ê¥ª¥×¥·¥ç¥ó¤Ç¤¹ -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "°ú¿ô¤¬Â¿¤¹¤®¤Þ¤¹\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "*¤¢¤Î*¤¢¤¤¤µ¤Äɽ¼¨¥×¥í¥°¥é¥à¡¢Hello ¤Î GNU ÈǤǤ¹¡£\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ "\n"
-#~ "-- °Ê²¼¤Ï»²¹ÍÌõ¤Ç¤¹¡£Ë¡Åª¤Ê»ö¹à¤Ë¤Ä¤¤¤Æ¤Ï¾å¤Îµ½Ò¤Ë¤·¤¿¤¬¤Ã¤Æ¤¯¤À¤µ¤¤¡£\n"
-#~ "°ìÀÚ¤ÎÊݾڤϤ¢¤ê¤Þ¤»¤ó¡£¾¦¶ÈÀ¤äÆÃÄêÌÜŪŬ¹çÀ¤Ë´Ø¤¹¤ëÊݾڤ¹¤é¤¢¤ê¤Þ¤»"
-#~ "¤ó¡£\n"
-#~ "¤¢¤Ê¤¿¤Ï¡¢GNU hello ¤ò GNU General Public License ¤Ë´ð¤Å¤¤¤ÆºÆÇÛÉۤǤ¤Þ"
-#~ "¤¹¡£\n"
-#~ "¤³¤ì¤é¤Î»ö¹à¤Ë¤Ä¤¤¤Æ¤Î¾Ü¤·¤¤¾ðÊó¤Ï¡¢COPYING ¤È¤¤¤¦¥Õ¥¡¥¤¥ë¤ò¸«¤Æ¤¯¤À¤µ"
-#~ "¤¤¡£\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: ξΩ¤·¤Ê¤¤¥Õ¥é¥°: -m¤È-t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: ¤¢¤ó¤¿Ã¯¤À¤¤¡©\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: ¤¢¤Ê¤¿¤Î¥á¡¼¥ë¡¦¥¹¥×¡¼¥ë¡¦¥Õ¥¡¥¤¥ë¤¬¸«¤Ä¤«¤ê¤Þ¤»¤ó¡£\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "¤³¤³¤Ç¤Ï²¿¤âµ¯¤³¤é¤Ê¤¤¡£"
+++ /dev/null
-# Georgian messages for hello.
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# Nugzar Nebieridze <nugzar@nebieridze.com>, 2003.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.1.1\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2003-02-25 13:00+0400\n"
-"Last-Translator: Nugzar Nebieridze <nugzar@nebieridze.com>\n"
-"Language-Team: Georgian <ka@li.org>\n"
-"Language: ka\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "აკრიბეთ `%s --help' დამატებითი ინფორმაციისთვის.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "სალამი მსოფლიოს!\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+------------------+\n"
-"| სალამი მსოფლიოს! |\n"
-"+------------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "სალამი მსოფლიოს!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "გამოძახება: %s [პარამეტრი]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help ამ დახმარების ჩვენება და პროგრამიდან გამოსვლა\n"
-" -v, --version ვერსიის ჩვენება და პროგრამიდან გამოსვლა\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional ტრადიციული მისალმება\n"
-" -n, --next-generation მომავალი თაობის მისალმება\n"
-" -m, --mail თქვენი ფოსტის ჩვენება\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "შეცდომების შესახებ გააგზავნეთ შეტყობინებები <%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "შეცდომების შესახებ გააგზავნეთ შეტყობინებები <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: `%s' პარამეტრი გაურკვეველია\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: `--%s' პარამეტრს მნიშვნელობა არ გადაეცემა\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: `%c%s' პარამეტრს მნიშვნელობა არ გადაეცემა\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: საჭიროა `%s' პარამეტრისთვის მნიშვნელობის გადაცემა\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: უცნობი პარამეტრი `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: უცნობი პარამეტრი `--%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: არასწორი პარამეტრი -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: საჭიროა %c პარამეტრისთვის მნიშვნელობის გადაცემა\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: `-W %s' პარამეტრი გაურკვეველია\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: `-W %s' პარამეტრს მნიშვნელობა არ გადაეცემა\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: საჭიროა `%s' პარამეტრისთვის მნიშვნელობის გადაცემა\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: ვირტუალური მეხსიერება ამოწურულია\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: დაუშვებელი პარამეტრი -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "ზედმეტი პარამეტრები\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, მისალმების პროგრამა.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: არათავსებადი პარამეტრები: -m და -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: ვინ ბრძანდებით?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: ვერ ვიპოვე თქვენი ფოსტის ფაილი.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "აქ არაფერი ას ხდება."
+++ /dev/null
-# Korean messages for GNU hello.
-#
-# This file is distributed under the same license as the hello package.
-#
-# Copyright (C) 1996-1997, 1999, 2001, 2002 Free Software Foundation, Inc.
-#
-# Bang Jun-Young <bangjy@geocities.com>, 1996-1997
-# Changwoo Ryu <cwryu@debian.org> 1999-2002, 2007, 2009
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.3.91\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2009-01-13 11:45+0900\n"
-"Last-Translator: Changwoo Ryu <cwryu@debian.org>\n"
-"Language-Team: Korean <translation-team-ko@lists.sourceforge.net>\n"
-"Language: ko\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: 추가 오퍼렌드: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "더 많이 알아 보려면 `%s --help' 옵션을 사용하십시오.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "안녕, 여러분\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"┌───────────────┐\n"
-"│ 안녕, 여러분! │\n"
-"└───────────────┘\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "안녕하세요, 여러분!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "사용법: %s [옵션]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "반가운 인사말을 (인사말은 설정할 수 있음) 출력합니다.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help 이 도움말을 표시하고 마칩니다\n"
-" -v, --version 버전 정보를 표시하고 마칩니다\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional 전통적인 인사말 형식을 사용합니다\n"
-" -n, --next-generation 신세대 인사말 형식을 사용합니다\n"
-" -g, --greeting=<텍스트> <텍스트>를 인사말로 사용합니다\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "버그는 %s 주소로 알려 주십시오.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "버그는 %s 주소로 알려 주십시오.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "알 수 없는 시스템 오류"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: `%s' 옵션은 모호한 옵션입니다\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: `--%s' 옵션은 인수가 필요 없습니다\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: `%c%s' 옵션은 인수가 필요 없습니다\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: `%s' 옵션은 인수가 필요합니다\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: 인식할 수 없는 옵션 `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: 인식할 수 없는 옵션 `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: 틀린 옵션 -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: 인수가 필요한 옵션입니다 -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: `-W %s' 옵션은 모호한 옵션입니다\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: `-W %s' 옵션은 인수를 허용하지 않습니다\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: `%s' 옵션은 인수가 필요합니다\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "쓰기 오류"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "“"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "”"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "메모리가 바닥남"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: 잘못된 옵션 -- %c\n"
+++ /dev/null
-# Latvian translation for hello.
-# This file is distributed under the same license as the hello package.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-#
-# Ilya Ketris <ilya@gde.to>, 1999.
-# Rihards Prieditis <rprieditis@gmail.com>,2009, 2010,2011.
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.6.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-03-31 19:18-0000\n"
-"Last-Translator: Rihards Priedītis <rprieditis@gmail.com>\n"
-"Language-Team: Latvian <translation-team-lv@lists.sourceforge.net>\n"
-"Language: lv\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n != 0 ? 1 : "
-"2);\n"
-"X-Generator: Lokalize 1.0\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: papildus operands: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Mēģiniet \"%s --help\" papildus informācijai.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "sveika, pasaule\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+----------------------+\n"
-"| Sveika, pasaule! |\n"
-"+----------------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Sveika, pasaule!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Lietošana: %s [OPCIJAS]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Drukāt draudzīgu, pielāgojamu sveicienu.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help attēlo šo palīdzības ziņu un iziet\n"
-" -v, --version attēlo versijas informāciju un iziet\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional izmantot tradicionālo sveikšanas formātut\n"
-" -n, --next-generation izmantot nākamās paaudzēs sveikšanas formātu\n"
-" -g, --greeting=TEKST izmantot TEKSTU, kā sveiciena ziņojumu\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Ziņojiet par kļūdas uz: %s.\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Ziņojiet %s kļūdas uz: %s.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s mājas lapa: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s mājas lapa: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Vispārējā palīdzība lietojot GNU programmatūru: <http://www.gnu.org/gethelp/"
-">\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Autortiesības (C) %s Brīvās Programmatūras Fondam, Inc.\n"
-"Licence GPLv3+: GNU GPL versija 3 vai vēlāks <http://gnu.org/licenses/gpl."
-"html>\n"
-"Šī ir brīva programmatūra: jūs varat brīvi mainīt un izplatīt to.\n"
-"BEZ JEBKĀDĀM GARANTIJĀM, līdz likumā noteiktajam apjomam.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Nezināma sistēmas kļūda"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: opcija \"%s\" nav viennozīmīga\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: opcija \"--%s\" neatļauj argumentu\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: opcija \"%c%s\" neatļauj argumentu\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: opcijai \"--%s\" nepieciešams arguments\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: neatpazīta opcija \"--%s\"\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: neatpazita opcija \"%c%s\"\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: nederiga opcija -- \"%c\"\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: opcijai nepieciešams arguments -- \"%c\"\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: opcija \"-W %s\" nav viennozīmīga\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: opcija \"-W %s\" nepieļauj argumentu\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: opcijai \"-W %s\" nepieciešams arguments\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "rakstīšanas kļūda"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "\""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "\""
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "atmiņa izsmelta"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: opcija -- %c nav atļauta.\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Par daudz argumentu.\n"
-
-#~ msgid ""
-#~ "This is GNU Hello, THE greeting printing program.\n"
-#~ "Usage: %s [OPTION]\n"
-#~ " -h, --help display this help and exit\n"
-#~ " -v, --version display version information and exit\n"
-#~ " -t, --traditional use traditional greeting format\n"
-#~ " -m, --mail print your mail\n"
-#~ "\n"
-#~ "Report bugs to bug-gnu-hello@prep.ai.mit.edu.\n"
-#~ msgstr ""
-#~ "Tas ir GNU Hello, sveicinājuma programma.\n"
-#~ "Izsaukums: %s [ATSLĒGA]\n"
-#~ " -h, --help izvadīt palīdzību\n"
-#~ " -v, --version izvadīt versiju\n"
-#~ " -t, --traditional izmantot tradicionālo sveicinājuma formātu\n"
-#~ " -m, --mail drukāt jūsu pastu\n"
-#~ "\n"
-#~ "Ziņojiet kļudas uz bug-gnu-hello@gnu.ai.mit.edu.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright © %s Free Software Foundation, Inc.\n"
-#~ "Nekādu garantiju; ne pat KOMERCIZMANTOŠANAI vai DERĪGUMAM\n"
-#~ "JEBKURAM NOLŪKAM. Jūs varat izplatīt GNU %s kopijas saskaņā ar\n"
-#~ "GNU General Public License.\n"
-#~ "Tālākai informācijai skatieties failu COPYING.\n"
-
-#~ msgid "%s: incompatible flags: -m and -t\n"
-#~ msgstr "%s: nesavietojamas atslēgas: -m un -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Kas jūs esat?\n"
-
-#~ msgid "%s: cannot find your mail spool file.\n"
-#~ msgstr "%s: nevar atrast jūsu pasta failu.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Šeit nekas nenotiek."
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "This is free software; see the source for copying conditions. There is "
-#~ "NO\n"
-#~ "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR "
-#~ "PURPOSE.\n"
-#~ msgstr ""
-#~ "Copyright © %s Free Software Foundation, Inc.\n"
-#~ "Šī prgrammatūra ir brīva; skatieties izplatīšanas noteikumus "
-#~ "izejtekstos.\n"
-#~ "Nekādu garantiju; ne pat KOMERCIZMANTOŠANAI vai DERĪGUMAM\n"
-#~ "JEBKURAM NOLŪKAM.\n"
+++ /dev/null
-# translation of hello-2.3.91.ms.po to Malay
-# Copyright (C) 2003, 2009 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-#
-# NIK RAMADHAN NIK IDRIS <toknix@yahoo.com>, 2003.
-# Muhammad Najmi bin Ahmad Zabidi <najmi.zabidi@gmail.com>, 2009.
-msgid ""
-msgstr ""
-"Project-Id-Version: hello-2.3.91\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2009-07-16 15:26+0800\n"
-"Last-Translator: Muhammad Najmi bin Ahmad Zabidi <najmi.zabidi@gmail.com>\n"
-"Language-Team: Malay <translation-team-ms@lists.sourceforge.net>\n"
-"Language: ms\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.11.4\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: operan lebihan: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Cuba `%s --help' untuk lebih maklumat.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "Hello, Duniaku\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| Hello, Duniaku! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Hello, Duniaku!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Penggunaan: %s [PILIHAN]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Cetak ucapselamat yang mesra dan mudah diubah. \n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help paparkan bantuan dan keluar\n"
-" -v, --version paparkan maklumat versi dan keluar\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional menggunakan format ucapan tradisional\n"
-" -n, --next-generation menggunakan format ucapan generasi akan datang\n"
-" -g, --greeting=TEKS guna TEKS untuk ucapselamat\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Laporkan pepijat kepada <%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Laporkan pepijat kepada <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Hakcipta (C) %s Free Software Foundation, Inc.\n"
-"Lesen GPLv3+: GNU GPL version 3 atau kemudiannya <http://gnu.org/licenses/"
-"gpl.html>\n"
-"Ini adalah perisian bebas, anda boleh mengedarnya.\n"
-"TIADA WARANTI dalam had yang dibenarkan oleh undang-undang.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Ralat sistem tidak diketahui"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: pilihan `%s' adalah kabur\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: pilihan `--%s' tidak mengizinkan hujah\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: pilihan `%c %s' tidak mengizinkan hujah\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: pilihan `%s' memerlukan hujah\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: pilihan tidak dapat dikenalpasti `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: pilihan tidak dapat dikenalpasti `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: pilihan tidak sah -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: pilihan memerlukan hujah -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: pilihan `-W %s' adalah kabur\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: pilihan `-W %s' tidak mengizinkan hujah\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: pilihan `%s' memerlukan hujah\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "ralat tulis"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "`"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "'"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "memoritelah kehabisan"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: pilihan adalah salah -- %c\n"
+++ /dev/null
-# Norwegian messages for GNU hello. (bokmål dialect)
-# Copyright (C) 1996 Free Software Foundation, Inc.
-# Eivind Tagseth <eivindt@multinet.no>, 1997, 2004.
-# Karl Anders Øygard <Karl.Oygard@fou.telenor.no>, 1996.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.1.1\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2004-02-13 23:59+0100\n"
-"Last-Translator: Eivind Tagseth <eivindt@multinet.no>\n"
-"Language-Team: Norwegian Bokmaal <i18n-nb@lister.ping.uio.no>\n"
-"Language: nb\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Prøv med «%s --help» for mer informasjon.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "hei, verden\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+--------------+\n"
-"| Hei, verden! |\n"
-"+--------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Hei, verden!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Bruk: %s [FLAGG]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help vis denne hjelpteksten og avslutt\n"
-" -V, --version vis versjonsinformasjon og avslutt\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional bruk tradisjonelt hilsningsformat\n"
-" -n, --next-generation bruk neste-generasjons hilsningsformat\n"
-" -m, --mail vis mailen din\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Rapporter feil til <%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Rapporter feil til <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: flagget «%s» er flertydig\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: flagget «--%s» tar ikke argumenter\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: flagget «%c%s» tar ikke argumenter\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: flagget «%s» behøver et argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: ukjent flagg «--%s»\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: ukjent flagg «%c%s»\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: ulovlig flagg -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: flagg behøver et argument -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: flagg «-W %s» er flertydig\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: flagg «-W %s» tar ikke argumenter\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: flagget «%s» behøver et argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: Virtuelt minne oppbrukt\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: ulovlig flagg -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "For mange argumenter\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, Det utimate hilsningsskriveprogrammet.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "(Følgende tekst er en oversettelse som *kun* gis på en informativ basis.\n"
-#~ "For alle juridiske tolkninger gjelder den engelske originalteksten.)\n"
-#~ "\n"
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "Det er INGEN FORM FOR garanti; ikke engang for SALGBARHET eller EGNETHET\n"
-#~ "FOR NOEN SPESIELL ANVENDELSE. Du kan redistribuere kopier av GNU %s "
-#~ "under\n"
-#~ "vilkårene gitt i GNU General Public License.\n"
-#~ "For mer infomrasjon om dette, se filen kalt COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Ukompatible flagg: -m og -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Hvem er du?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Kan ikke finne mail-filen din.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Her skjer ingen ting."
-
-#~ msgid ""
-#~ "This is GNU Hello, THE greeting printing program.\n"
-#~ "Usage: %s [OPTION]\n"
-#~ " -h, --help display this help and exit\n"
-#~ " -v, --version display version information and exit\n"
-#~ " -t, --traditional use traditional greeting format\n"
-#~ " -m, --mail print your mail\n"
-#~ "\n"
-#~ "Report bugs to bug-gnu-hello@prep.ai.mit.edu.\n"
-#~ msgstr ""
-#~ "Dette er GNU Hello, PROGRAMMET for utskrift av hilsninger.\n"
-#~ "Bruk: %s [FLAGG]\n"
-#~ " -h, --help vis denne hjelpteksten og avslutt\n"
-#~ " -v, --version vis programversjon og avslutt\n"
-#~ " -t, --traditional bruk tradisjonelt hilsningsformat\n"
-#~ " -m, --mail skriv ut din(e) brev\n"
-#~ "\n"
-#~ "Rapporter bugs til bug-gnu-hello@prep.ai.mit.edu.\n"
+++ /dev/null
-# Dutch translations for GNU hello.
-# Copyright (C) 2011 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-#
-# Benno Schulenberg <benno@vertaalt.nl>, 2007, 2010, 2011.
-# Ivo Timmermans <ivo@debian.org>, 2000, 2002.
-# Erick Branderhorst <branderh@debian.org>, 1996.
-msgid ""
-msgstr ""
-"Project-Id-Version: hello-2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-04-12 10:37+0200\n"
-"Last-Translator: Benno Schulenberg <benno@vertaalt.nl>\n"
-"Language-Team: Dutch <vertaling@vrijschrift.org>\n"
-"Language: nl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Lokalize 1.0\n"
-"Plural-Forms: nplurals=2; plural=n != 1;\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: overtollig argument: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Typ '%s --help' voor meer informatie.\n"
-
-# Ima to smisel prevajati? :-)
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "hallo, wereld\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+----------------+\n"
-"| Hallo, wereld! |\n"
-"+----------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Hallo, wereld!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr ""
-"Gebruik: %s [OPTIE]...\n"
-"\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Een vriendelijke, aanpasbare groet weergeven.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help deze hulptekst tonen en stoppen\n"
-" -v, --version programmaversie tonen en stoppen\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -g, --greeting=TEKST deze tekst tonen in plaats van de standaardgroet\n"
-" -n, --next-generation de moderne opmaak gebruiken\n"
-" -t, --traditional de traditionele opmaak gebruiken\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Rapporteer gebreken in het programma aan <%s>;\n"
-"meld fouten in de vertaling aan <vertaling@vrijschrift.org>.\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Rapporteer gebreken in het programma '%s' aan <%s>;\n"
-"meld fouten in de vertaling aan <vertaling@vrijschrift.org>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "Webpagina van '%s': <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "Webpagina van '%s': <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Algemene hulp bij gebruik van GNU-software: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"Licentie GPLv3+: GNU GPL versie 3 of nieuwer <http://gnu.org/licenses/gpl."
-"html>\n"
-"Dit is vrije software: u mag het vrijelijk wijzigen en verder verspreiden.\n"
-"Er is GEEN GARANTIE, voor zover de wet dit toestaat.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Onbekende systeemfout"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: optie '%s' is niet eenduidig\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: optie '--%s' staat geen argument toe\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: optie '%c%s' staat geen argument toe\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: optie '--%s' vereist een argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: onbekende optie '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: onbekende optie '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: ongeldige optie -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: optie vereist een argument -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: optie '-W %s' is niet eenduidig\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: optie '-W %s' staat geen argument toe\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: optie '-W %s' vereist een argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "schrijffout"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "‘"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "’"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "onvoldoende geheugen beschikbaar"
+++ /dev/null
-# Norwegian nynorsk messages for GNU hello.
-# Copyright (C) 1996 Free Software Foundation, Inc.
-# Kjetil Torgrim Homme <kjetilho@ifi.uio.no>, 2001.
-# Eivind Tagseth <eivindt@multinet.no>, 1997.
-# Karl Anders Øygard <Karl.Oygard@fou.telenor.no>, 1996.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 1.3.37\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2002-02-02 17:10+0100\n"
-"Last-Translator: Kjetil Torgrim Homme <kjetilho@linpro.no>\n"
-"Language-Team: Norwegian nynorsk <i18n-nn@lister.ping.uio.no>\n"
-"Language: nn\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Prøv «%s --help» for meir informasjon.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "hei, verda\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| Hei, verda! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Hei, verda!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Bruk: %s [FLAGG]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help vis denne hjelpeteksten og avslutt\n"
-" -v, --version vis programversjon og avslutt\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional bruk tradisjonelt format på helsinga\n"
-" -n, --next-generation bruk nestegenerasjonsformat på helsinga\n"
-" -m, --mail vis fram eposten din\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Rapporter programfeil til <%s>.\n"
-"Feil i den norske teksten kan meldast til <i18n-nn@lister.ping.uio.no>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Rapporter programfeil til <%s>.\n"
-"Feil i den norske teksten kan meldast til <i18n-nn@lister.ping.uio.no>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: flagget «%s» er fleirtydig\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: flagget «--%s» tek ikkje argument\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: flagget «%c%s» tek ikkje noko argument\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: flagget «%s» treng eit argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: ukjent flagg «--%s»\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: ukjent flagg «%c%s»\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: ulovleg flagg -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: flagget treng eit argument -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: flagget «-W %s» er fleirtydig\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: flagget «-W %s» tek ikkje noko argument\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: flagget «%s» treng eit argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: Virtuelt minne oppbrukt\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: ulovleg flagg -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "For mange argument\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, det BESTE programmet til å skriva helsingar.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "(Fylgjande tekst er ei omsetjing som *kun* vert gitt på informativ "
-#~ "basis.\n"
-#~ "For alle juridiske tolkingar gjeld den engelske originalteksten.)\n"
-#~ "\n"
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "Der er INGA FORM FOR garanti; ikkje eingong for at produktet er eigna "
-#~ "for\n"
-#~ "SAL eller BRUK TIL NOKO FORMÅL. Du kan redistribuere kopiar av GNU %s\n"
-#~ "under vilkåra i GNU General Public License.\n"
-#~ "For meir informasjon om dette, sjå fila med namnet COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Flagga -m og -t kan ikkje kombinerast.\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Kven er du?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Kan ikkje finne epost-fila di.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Her skjer ingen ting."
+++ /dev/null
-# Polish translations for the GNU hello messages
-# Copyright (C) 1996, 1997, 1999, 2000, 2001, 2003, 2004, 2006, 2007, 2008, 2010, 2011 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Rafał Maszkowski <rzm@icm.edu.pl>, 1996-1997, 1999-2001, 2003, 2004, 2006-2008, 2010-2011. „
-# corrections: Paweł Krawczyk <kravietz@pipeta.chemia.pk.edu.pl>, 1996
-# typos corrections in 2.1.1: PLD 2003
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.6.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-03-23 21:30+0100\n"
-"Last-Translator: Rafał Maszkowski <rzm@icm.edu.pl>\n"
-"Language-Team: Polish <translation-team-pl@lists.sourceforge.net>\n"
-"Language: pl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: nadmiarowy argument: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Użyj `%s --help' dla uzyskania informacji.\n"
-
-# Ima to smisel prevajati? :-)
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "witaj świecie\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+----------------+\n"
-"| Witaj świecie! |\n"
-"+----------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Witaj świecie!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Składnia: %s [OPCJA]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Wypisuje przyjazne konfigurowalne przywitanie.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help wyświetlenie tego opisu i zakończenie\n"
-" -v, --version wyświetlenie numeru wersji i zakończenie\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional tradycyjny format przywitania\n"
-" -n, --next-generation użycie formatu powitania nowej generacji\n"
-" -g, --greeting=TEKST użycie TEKSTU jako powitania\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"O błędach programu poinformuj %s\n"
-"O błędach tłumaczenia poinformuj translation-team-pl@lists.sourceforge.net\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "O błędach programu %s informuj %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "Strona domowa %s: %s\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "Strona domowa %s: http://www.gnu.org/software/%s/\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr "Pomoc w używaniu oprogramowania GNU: http://www.gnu.org/gethelp/\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"Licencja GPLv3+: GNU GPL wersja 3 albo późniejsza <http://gnu.org/licenses/"
-"gpl.html>\n"
-"To jest wolne oprogramowanie. Autorzy nie dają ŻADNYCH gwarancji w "
-"granicach\n"
-"dozwolonych prawem.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Nieznany błąd systemu"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: opcja '%s' jest niejednoznaczna\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: opcja '--%s' nie może mieć argumentu\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: opcja '%c%s' nie może mieć argumentu\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: opcja '--%s' wymaga argumentu\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: nierozpoznana opcja '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: nierozpoznana opcja '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: nielegalna opcja -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: opcja wymaga argumentu -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: opcja '-W %s' jest niejednoznaczna\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: opcja '-W %s' nie może mieć argumentu\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: opcja '-W %s' wymaga argumentu\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "błąd zapisu"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "„"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "\""
-
-# Morda ,,Zmanjkalo pomnilnika''?
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "pamięć wyczerpana"
+++ /dev/null
-# Portuguese translation of the "hello" messages
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# António João Rendas <arendas@telepac.pt>, 1996.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 1.3.4\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 1996-04-29 10:35\n"
-"Last-Translator: António João Rendas <arendas@telepac.pt>\n"
-"Language-Team: Português <pt@li.org>\n"
-"Language: pt\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, fuzzy, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Usa `%s --help' para mais informação\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "olá, mundo\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Olá, mundo!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: a opção `%s' é ambígua\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: a opção `--%s' não admite um argumento\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: a opção `%c%s' não admite um argumento\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: a opção `%s' requer um argumento\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: opção desconhecida `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: opção desconhecida `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: opção ilegal -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: a opção `%s' requer um argumento\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: a opção `%s' é ambígua\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: a opção `--%s' não admite um argumento\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: a opção `%s' requer um argumento\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: nao há mais memória virtual\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: opção ilegal -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Demasiados argumentos\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "This is GNU Hello, THE greeting printing program.\n"
-#~ "Usage: %s [OPTION]\n"
-#~ " -h, --help display this help and exit\n"
-#~ " -v, --version display version information and exit\n"
-#~ " -t, --traditional use traditional greeting format\n"
-#~ " -m, --mail print your mail\n"
-#~ "\n"
-#~ "Report bugs to bug-gnu-hello@prep.ai.mit.edu.\n"
-#~ msgstr ""
-#~ "Isto é o GNU Hello, O programa de saudações.\n"
-#~ "\n"
-#~ "Utilização:\n"
-#~ "\n"
-#~ " %s [-htvm] [--help] [--version] [--traditional] [--mail]\n"
-#~ "\n"
-#~ " -h, --help mostrar esta ajuda e sair\n"
-#~ " -v, --version mostrar informação sobre a versão e sair\n"
-#~ "\n"
-#~ " -t, --traditional usar o formato de saudação tradicional\n"
-#~ " -m, --mail imprimir o teu correio\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Quem és tu?\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Aqui não se passa nada."
-
-#~ msgid "%s: unrecognized option, character code 0%o\n"
-#~ msgstr "%s: opção desconhecida, código caracter 0%o\n"
-
-#~ msgid "%s: unrecognized option `-%c'\n"
-#~ msgstr "%s: opção desconhecida `-%c'\n"
-
-#~ msgid "%s: option `-%c' requires an argument\n"
-#~ msgstr "%s: a opção `-%c' requer um argumento\n"
-
-#~ msgid "digits occur in two different argv-elements.\n"
-#~ msgstr "ocorrem dígitos em dois elementos diferentes de argv\n"
-
-#~ msgid "option %c\n"
-#~ msgstr "opção %c\n"
-
-#~ msgid "option a\n"
-#~ msgstr "opção a\n"
-
-#~ msgid "option b\n"
-#~ msgstr "opção b\n"
-
-#~ msgid "option c with value `%s'\n"
-#~ msgstr "opção c com valor `%s'\n"
-
-#~ msgid "?? getopt returned character code 0%o ??\n"
-#~ msgstr "?? getopt retornou código caracter 0%o ??\n"
-
-#~ msgid "non-option ARGV-elements: "
-#~ msgstr "elementos de ARGV que não são opções: "
-
-#~ msgid "option %s"
-#~ msgstr "opção %s"
-
-#~ msgid " with arg %s"
-#~ msgstr "com argumento %s"
-
-#~ msgid "option d with value `%s'\n"
-#~ msgstr "opção d com valor `%s'\n"
+++ /dev/null
-# Brazilian portuguese messages for hello.
-# Copyright (C) 1999, 2002 Free Software Foundation, Inc.
-# Alexandre Folle de Menezes <afmenez@terra.com.br>, 2002.
-# based on the previous translation to pt_BR (v1.3.24) by
-# Rodrigo Parra Novo <rodrigo.novo@corp.terralycos.com>, 1999.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.1.1\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2002-12-14 02:10-0300\n"
-"Last-Translator: Alexandre Folle de Menezes <afmenez@terra.com.br>\n"
-"Language-Team: Brazilian Portuguese <ldp-br@bazar.conectiva.com.br>\n"
-"Language: pt_BR\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Tente `%s --help' para maiores informações.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "bom dia, mundo\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+-----------------+\n"
-"| Bom dia, mundo! |\n"
-"+-----------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Bom dia, mundo!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Uso: %s [OPÇÃO]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help mostra esta ajuda e sai\n"
-" -v, --version mostra informações sobre a versão e sai\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional usa formato de saudação tradicional\n"
-" -n, --next-generation use formato de saudação de próxima geração\n"
-" -m, --mail mostra o seu correio eletrônico\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Reporte erros para <%s>.\n"
-"Reporte erros da tradução para <afmenez@terra.com.br>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Reporte erros para <%s>.\n"
-"Reporte erros da tradução para <afmenez@terra.com.br>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: opção `%s' é ambígua\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: opção `--%s' não permite um argumento\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: opção `%c%s' não permite um argumento\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: opção `%s' requer um argumento\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: opção `--%s' não reconhecida\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: opção `%c%s' não reconhecida\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: opção inválida -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: opção requer um argumento -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: opção `-W %s' é ambígua\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: opção `-W %s' não permite um argumento\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: opção `%s' requer um argumento\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: Memória virtual esgotada\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: opção ilegal -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Argumentos demais\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, `O' programa de impressão de saudação.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright © %s Free Software Foundation, Inc.\n"
-#~ "NÃO existe qualquer garantia; nem mesmo a garantia de COMERCIABILIDADE "
-#~ "ou\n"
-#~ "ADEQUAÇÃO À QUALQUER FINALIDADE PARTICULAR. O GNU %s pode ser "
-#~ "redistribuído\n"
-#~ "nos termos da Licensa Geral Pública GNU.\n"
-#~ "Para mais informação sobre esse assunto, veja o arquivo com nome "
-#~ "COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: opções incompatíveis: -m e -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Quem é você?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr ""
-#~ "%s: não foi possível encontrar o seu arquivo de spool de correio "
-#~ "eletrônico.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Nada acontece aqui."
+++ /dev/null
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
+++ /dev/null
-# Sed script that remove the POT-Creation-Date line in the header entry
-# from a POT file.
-#
-# The distinction between the first and the following occurrences of the
-# pattern is achieved by looking at the hold space.
-/^"POT-Creation-Date: .*"$/{
-x
-# Test if the hold space is empty.
-s/P/P/
-ta
-# Yes it was empty. First occurrence. Remove the line.
-g
-d
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
+++ /dev/null
-# Mesajele în limba românã pentru pachetul hello.
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# Acest fiºier este distribuit sub aceeaºi licenþã ca ºi pachetul hello.
-# Eugen Hoanca <eugenh@urban-grafx.ro>, 2003.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.1.1\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2003-04-19 09:20+0300\n"
-"Last-Translator: Eugen Hoanca <eugenh@urban-grafx.ro>\n"
-"Language-Team: Romanian <translation-team-ro@lists.sourceforge.net>\n"
-"Language: ro\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Încercaþi `%s --help' pentru mai multe informaþii\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "hello, world\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Hello, world!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Folosire: %s [OPÞIUNE]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help afiºeazã acest mesaj ºi terminã\n"
-" -v, --version afiºeazã informaþii versiune ºi terminã\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional foloseºte formatul tradiþional de salut\n"
-" -n, --next-generation foloseºte formatul salutului noii generaþii\n"
-" -m, --mail tipãreºte mailul vostru\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Raportaþi bug-uri la >%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Raportaþi bug-uri la >%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: opþiunea `%s' este ambiguã\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: opþiunea `--%s' nu permite un parametru\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: opþiunea `%c%s' nu permite un parametru\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: opþiunea `%s' necesitã un parametru\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: opþiune necunoscutã `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: opþiune necunoscutã `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: opþiune invalidã -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: opþiunea necesitã un parametru -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: opþiunea `-W %s' este ambiguã\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: opþiunea `-W %s' nu permite un parametru\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: opþiunea `%s' necesitã un parametru\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: Memorie virtualã plinã\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: opþiune ilegalã -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Prea mulþi parametri\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, programul de tipãrire al saluturilor\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "NU existã nici o garanþie; nici mãcar pentru VANDABILITATE sau POTRIVIRE\n"
-#~ "PENTRU UN SCOP ANUME. Puteþi distribui copii ale GNU %s sub termenii\n"
-#~ "Licenþei Publice Generale GNU.\n"
-#~ "Pentru mai multe informaþii despre aceste chestiuni, citiþi fiºierul "
-#~ "numit\n"
-#~ "COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Marcaje(flags) incompatibile: -m ºi -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Cine eºti tu?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Nu pot gãsi fiºierul tãu de spool de mail\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Nu se întâmplã nimic aici."
+++ /dev/null
-# ìÏËÁÌÉÚÁÃÉÑ GNU hello
-# Copyright (C) 1998 Free Software Foundation, Inc.
-# Oleg S. Tihonov <ost@tatnipi.ru>, 1998, 1999, 2001, 2002, 2007
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.1.96\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2007-02-13 06:51+0300\n"
-"Last-Translator: Oleg S. Tihonov <ost@tatnipi.ru>\n"
-"Language-Team: Russian <ru@li.org>\n"
-"Language: ru\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=koi8-r\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: ÌÉÛÎÉÊ ÏÐÅÒÁÎÄ: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "ðÏÐÒÏÂÕÊÔÅ `%s --help' ÄÌÑ ÐÏÌÕÞÅÎÉÑ ÂÏÌÅÅ ÐÏÄÒÏÂÎÏÇÏ ÏÐÉÓÁÎÉÑ.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "ÚÄÒÁ×ÓÔ×ÕÊ, ÍÉÒ\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+------------------+\n"
-"| úÄÒÁ×ÓÔ×ÕÊ, ÍÉÒ! |\n"
-"+------------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "úÄÒÁ×ÓÔ×ÕÊ, ÍÉÒ!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "éÓÐÏÌØÚÏ×ÁÎÉÅ: %s [ëìàþ]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "ðÅÞÁÔÁÅÔ ÄÒÕÖÅÓÔ×ÅÎÎÏÅ, ÎÁÓÔÒÁÉ×ÁÅÍÏÅ ÐÒÉ×ÅÔÓÔ×ÉÅ.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help ÐÏËÁÚÁÔØ ÜÔÕ ÓÐÒÁ×ËÕ É ×ÙÊÔÉ\n"
-" -v, --version ÐÏËÁÚÁÔØ ÉÎÆÏÒÍÁÃÉÀ Ï ×ÅÒÓÉÉ É ×ÙÊÔÉ\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional ÉÓÐÏÌØÚÏ×ÁÔØ ÔÒÁÄÉÃÉÏÎÎÙÊ ×ÉÄ ÐÒÉ×ÅÔÓÔ×ÉÑ\n"
-" -n, --next-generation ÉÓÐÏÌØÚÏ×ÁÔØ ÆÏÒÍÁÔ ÐÒÉ×ÅÔÓÔ×ÉÑ ÎÏ×ÏÇÏ ÐÏËÏÌÅÎÉÑ\n"
-" -g, --greeting=ôåëóô ÉÓÐÏÌØÚÏ×ÁÔØ ôåëóô × ËÁÞÅÓÔ×Å ÐÒÉ×ÅÔÓÔ×ÉÑ\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "ï ÏÛÉÂËÁÈ ÓÏÏÂÝÁÊÔÅ ÐÏ ÁÄÒÅÓÕ <%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "ï ÏÛÉÂËÁÈ ÓÏÏÂÝÁÊÔÅ ÐÏ ÁÄÒÅÓÕ <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, fuzzy, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"ìÉÃÅÎÚÉÑ: GNU GPL v2+ <http://www.gnu.org/licenses/gpl.html>\n"
-"üÔÏ Ó×ÏÂÏÄÎÏÅ ÐÒÏÇÒÁÍÍÎÏÅ ÏÂÅÓÐÅÞÅÎÉÅ. íÙ îå ðòåäïóôá÷ìñåí çáòáîôéê, \n"
-"× ÐÒÅÄÅÌÁÈ, ÄÏÐÕÓÔÉÍÙÈ ÚÁËÏÎÏÍ.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "îÅÉÚ×ÅÓÔÎÁÑ ÓÉÓÔÅÍÎÁÑ ÏÛÉÂËÁ"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: ÎÅÏÄÎÏÚÎÁÞÎÙÊ ËÌÀÞ `%s'\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: ËÌÀÞ `--%s' ÄÏÌÖÅÎ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ÂÅÚ ÁÒÇÕÍÅÎÔÁ\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: ËÌÀÞ `%c%s' ÄÏÌÖÅÎ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ÂÅÚ ÁÒÇÕÍÅÎÔÁ\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: ËÌÀÞ `%s' ÄÏÌÖÅÎ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ c ÁÒÇÕÍÅÎÔÏÍ\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: ÎÅÉÚ×ÅÓÔÎÙÊ ËÌÀÞ `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: ÎÅÉÚ×ÅÓÔÎÙÊ ËÌÀÞ `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: ÎÅ×ÅÒÎÙÊ ËÌÀÞ -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: ËÌÀÞ %c ÄÏÌÖÅÎ ÂÙ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ c ÁÒÇÕÍÅÎÔÏÍ\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: ÎÅÏÄÎÏÚÎÁÞÎÙÊ ËÌÀÞ `-W %s'\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: ËÌÀÞ `-W %s' ÄÏÌÖÅÎ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ ÂÅÚ ÁÒÇÕÍÅÎÔÁ\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: ËÌÀÞ `%s' ÄÏÌÖÅÎ ÉÓÐÏÌØÚÏ×ÁÔØÓÑ c ÁÒÇÕÍÅÎÔÏÍ\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "ÏÛÉÂËÁ ÚÁÐÉÓÉ"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "\""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "\""
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "ÐÁÍÑÔØ ÉÓÞÅÒÐÁÎÁ"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: ÎÅÄÏÐÕÓÔÉÍÙÊ ËÌÀÞ -- %c\n"
+++ /dev/null
-# hello sk.po
-# Copyright (C) 1999, 2000, 2001, 2002, 2008, 2010, 2011 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Marcel Telka <marcel@telka.sk>, 2002, 2008, 2010, 2011.
-# Stanislav Meduna <stano@meduna.org>, 2000, 2001.
-# Miroslav Vasko <vasko@debian.cz>, 1999.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.6.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-03-24 06:35+0100\n"
-"Last-Translator: Marcel Telka <marcel@telka.sk>\n"
-"Language-Team: Slovak <sk-i18n@lists.linux.sk>\n"
-"Language: sk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: operand navyše: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Skúste `%s --help' pre viac informácií.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "ahoj, svet\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+-------------+\n"
-"| Ahoj, svet! |\n"
-"+-------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Ahoj, svet!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Použitie: %s [VOĽBA]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Vytlačiť priateľský, nastaviteľný pozdrav.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help zobraziť túto pomoc a skončiť\n"
-" -v, --version zobraziť informácie o verzii a skončiť\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional použiť tradičný formát pozdravu\n"
-" -n, --next-generation použiť formát pozdravu ďalšej generácie\n"
-" -g, --greeting=TEXT použiť TEXT ako správu pozdravu\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Chyby hláste na: %s (po anglicky)\n"
-"Komentáre k slovenskému prekladu zasielajte na: sk-i18n@lists.linux.sk\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Chyby v %s hláste na: %s (po anglicky)\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "Domovská stránka %s: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "Domovská stránka %s: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Všeobecný návod na používanie softvéru GNU: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Autorské práva © %s Free Software Foundation, Inc.\n"
-"Licencia GPLv3+: GNU GPL verzia 3 alebo novšia <http://gnu.org/licenses/gpl."
-"html>\n"
-"Toto je slobodný softvér: môžete ho slobodne meniť a ďalej šíriť.\n"
-"Neposkytuje sa ŽIADNA ZÁRUKA v rozsahu povolenom zákonmi.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Neznáma systémová chyba"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: voľba '%s' je nejasná\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: voľba '--%s' nepovoľuje argument\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: voľba '%c%s' nepovoľuje argument\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: voľba '--%s' vyžaduje argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: neznáma voľba '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: neznáma voľba '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: neplatná voľba -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: voľba vyžaduje argument -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: voľba '-W %s' je nejasná\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: voľba '-W %s' nepovoľuje argument\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: voľba '-W %s' vyžaduje argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "chyba zápisu"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "„"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "“"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "vyčerpaná pamäť"
+++ /dev/null
-# Slovenian translation for hello.
-# Copyright (C) 1996, 2005, 2009, 2011 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Primož Peterlin <primozz.peterlin@gmail.com>, 1996, 2005, 2009.
-# Klemen Košir <klemen.kosir@gmx.com>, 2011.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-04-18 17:03+0100\n"
-"Last-Translator: Klemen Košir <klemen.kosir@gmx.com>\n"
-"Language-Team: Slovenian <translation-team-sl@lists.sourceforge.net>\n"
-"Language: sl\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: dodatni operand: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Za več podatkov poskusite '%s --help'\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "pozdravljen, svet\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+--------------------+\n"
-"| Pozdravljen, svet! |\n"
-"+--------------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Pozdravljen, svet!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Uporaba: %s [MOŽNOST] ...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Izpiše prijazen, prilagodljiv pozdrav.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help prikaže to pomoč\n"
-" -v, --version prikaže različico programa\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional uporabi običajno obliko pozdrava\n"
-" -n, --next-generation uporabi novo generacijo oblike pozdrava\n"
-" -g, --greeting=BESEDILO uporabi BESEDILO kot pozdrav\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Napake v programu sporočite na: <%s>\n"
-"Napake v prevodu sporočite na: <klemen.kosir@gmx.com>\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Napake v programu %s sporočite na: <%s>\n"
-"Napake v prevodu sporočite na: <klemen.kosir@gmx.com>\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "Domača stran %s: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "Domača stran %s: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Splošna pomoč pri uporabi programske opreme GNU: <http://www.gnu.org/gethelp/"
-">\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Avtorske pravice (C) %s Free Software Foundation, Inc.\n"
-"Dovoljenje GPLv3+: GNU GPL različice 3 ali kasnejše <http://gnu.org/licenses/"
-"gpl.html>\n"
-"To je prosta programska oprema; lahko jo spreminjate in/ali razširjate.\n"
-"Ta programska oprema NIMA GARANCIJE, do z zakonom dovoljene meje.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Neznana sistemska napaka"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: možnost '%s' je dvoumna\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: možnost '--%s' ne dovoljuje argumenta\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: možnost '%c%s' ne dovoljuje argumenta\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: možnost '--%s' zahteva argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: neprepoznana možnost '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: neprepoznana možnost '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: neveljavna možnost -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: možnost zahteva argument -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: možnost '-W %s' je dvoumna\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: možnost '-W %s' ne dovoljuje argumenta\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: možnost '-W %s' zahteva argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "napaka med pisanjem"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "\""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "\""
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "zmanjkalo je pomnilnika"
+++ /dev/null
-# Serbian translation of hello.
-# Copyright (C) 2012 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Joint translation effort of:
-# Aleksandar Jelenak <jelenak@verizon.net>, 2006; and
-# Filip Miletic <f.miletic@ewi.tudelft.nl>, 2004.
-# Мирослав Николић <miroslavnikolic@rocketmail.com>, 2012.
-msgid ""
-msgstr ""
-"Project-Id-Version: hello-2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2012-01-05 01:34+0200\n"
-"Last-Translator: Мирослав Николић <miroslavnikolic@rocketmail.com>\n"
-"Language-Team: Serbian <gnu@prevod.org>\n"
-"Language: sr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: додатни операнд: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Пробајте „%s --help“ за више информација.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "поздрав свима\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+----------------+\n"
-"| Поздрав свима! |\n"
-"+----------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Поздрав свима!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Употреба: %s [ОПЦИЈА]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Исписује пријатељски, прилагодљив поздрав.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help приказује ову помоћ и излази\n"
-" -v, --version приказује податке о издању и излази\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional користи традиционалан поздравни облик\n"
-" -n, --next-generation користи нови поздравни облик\n"
-" -g, --greeting=ТЕКСТ користи ТЕКСТ за поздравну поруку\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Грешке пријавите на: %s\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Грешке програма „%s“ пријавите на: %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s матична страница: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s матична страница: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr "Општа помоћ користећи ГНУ софтвер: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Ауторска права (C) %s Задужбина слободног софтвера, Инк.\n"
-"Лиценца ОЈЛв3+: ГНУ ОЈЛ издање 3 или касније <http://gnu.org/licenses/gpl."
-"html>.\n"
-"Ово је слободан софтвер: слободни сте да га мењате и расподељујете.\n"
-"Не постоји НИКАКВА ГАРАНЦИЈА, у оквирима дозвољеним законом.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Непозната системска грешка"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: опција „%s“ је нејасна\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: опција „--%s“ не дозвољава аргумент\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: опција „%c%s“ не дозвољава аргумент\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: опција „--%s“ захтева аргумент\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: непозната опција „--%s“\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: непозната опција „%c%s“\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: неисправна опција —— „%c“\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: опција захтева аргумент —— „%c“\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: опција „-W %s“ је нејасна\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: опција „-W %s“ не дозвољава аргумент\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: опција „-W %s“ захтева аргумент\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "грешка писања"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "„"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "“"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "меморија је потрошена"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: недозвољена опција -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "Исувише аргумената\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "ГНУ hello, ЧУВЕНИ програм за исписивање поздрава.\n"
+++ /dev/null
-# Swedish messages for hello.
-# Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Thomas Olsson <CID95THO@lustudat.student.lu.se>, 1997.
-# Christian Rose <menthos@menthos.com>, 2000, 2001, 2002, 2008.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.3.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2008-03-09 21:54+0100\n"
-"Last-Translator: Christian Rose <menthos@menthos.com>\n"
-"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
-"Language: sv\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: extra operand: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Försök med \"%s --help\" för mer information.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "hej, världen\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"┌───────────────┐\n"
-"│ Hej, världen! │\n"
-"└───────────────┘\n"
-"\n"
-"[Obs: Använd en lokal med UTF-8 för bästa visningsresultat.]\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Hej, världen!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Användning: %s [FLAGGA]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Skriv en vänlig, anpassningsbar hälsning.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help visa denna hjälptext och avsluta\n"
-" -v, --version visa versionsinformation och avsluta\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional använd traditionellt hälsningsformat\n"
-" -n, --next-generation använd nästa generations hälsningsformat\n"
-" -g, --greeting=TEXT använd TEXT som hälsningsmeddelande\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Rapportera fel till <%s>.\n"
-"Skicka synpunkter på översättningen till <tp-sv@listor.tp-sv.se>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Rapportera fel till <%s>.\n"
-"Skicka synpunkter på översättningen till <tp-sv@listor.tp-sv.se>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright © %s Free Software Foundation, Inc.\n"
-"Licens GPLv3+: GNU GPL version 3 eller senare <http://gnu.org/licenses/gpl."
-"html>\n"
-"\n"
-"(Följande text är en informell översättning som enbart tillhandahålls i\n"
-"informativt syfte. För alla juridiska tolkningar gäller den engelska\n"
-"originaltexten.)\n"
-"\n"
-"Det här är fri programvara. Du kan fritt modifiera det och\n"
-"vidaredistribuera det. Det finns INGEN GARANTI, i den omfattning som\n"
-"medges av gällande lag.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Okänt systemfel"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: flaggan \"%s\" är tvetydig\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: flaggan \"--%s\" tar inget argument\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: flaggan \"%c%s\" tar inget argument\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: flaggan \"%s\" behöver ett argument\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: flaggan \"--%s\" är okänd\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: flaggan \"%c%s\" är okänd\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: ogiltig flagga -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: flaggan behöver ett argument -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: flaggan \"-W %s\" är tvetydig\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: flaggan \"-W %s\" tar inget argument\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: flaggan \"%s\" behöver ett argument\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "skrivfel"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "”"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "”"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "minne slut"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: otillåten flagga -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "För många argument\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, PROGRAMMET för hälsningsutskrifter.\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "Copyright © %s Free Software Fondation, Inc.\n"
-#~ "Det finns INGEN SOM HELST garanti; inte ens för SÄLJBARHET eller "
-#~ "LÄMPLIGHET\n"
-#~ "FÖR NÅGOT SPECIELLT ÄNDAMÅL. Du får lov att distribuera kopior av GNU %s\n"
-#~ "enligt villkoren i GNU General Public License.\n"
-#~ "För mer information om gällande regler, se filen COPYING.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: Inkompatibla flaggor: -m och -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: Vem är du?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: Kan inte hitta din brevlådefil.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "Här händer inget."
+++ /dev/null
-# Translation hello messages to Thai.
-# Copyright (C) 2011 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Seksan Poltree <seksan.poltree@gmail.com>, 2007-2011.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: GNU hello 2.6.90\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-03-24 03:34+0700\n"
-"Last-Translator: Seksan Poltree <seksan.poltree@gmail.com>\n"
-"Language-Team: Thai <translation-team-th@lists.sourceforge.net>\n"
-"Language: th\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=utf-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Poedit-Language: Thai\n"
-"X-Poedit-Country: THAILAND\n"
-"X-Poedit-SourceCharset: utf-8\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: ตัวถูกดำเนินการมากเกินไป: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "ลองใช้ '%s --help' เพื่อแสดงข้อมูลมากขึ้น.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "สวัสดี, ชาวโลก\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+-----------------+\n"
-"| สวัสดี, ชาวโลก! |\n"
-"+-----------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "สวัสดี, ชาวโลก!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "การใช้งาน: %s [ตัวเลือก]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "พิมพ์คำทักทายรูปแบบเป็นมิตร, สามารถปรับแต่งได้ .\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help แสดงข้อความช่วยเหลือนี้แล้วออกจากโปรแกรม\n"
-" -v, --version แสดงข้อมูลรุ่นแล้วออกจากโปรแกรม\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional ใช้รูปแบบคำทักทายแบบดั้งเดิม\n"
-" -n, --next-generation ใช้รูปแบบคำทักทายแบบรุ่นใหม่\n"
-" -g, --greeting=ข้อความ ใช้ 'ข้อความ' เป็นข้อความในการทักทาย\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "รายงานบั๊กไปยัง: <%s>\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "รายงานบั๊ก %s ไปที่: %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s หน้าเว็บหลัก: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s หน้าเว็บหลัก: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr "ความช่วยเหลือทั่วไปในการใช้ซอฟต์แวร์ GNU : <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"สงวนสิขสิทธิ์ (C) %s Free Software Foundation, Inc.\n"
-"สัญญาอนุญาต GPLv3: GNU GPL รุ่น 3 หรือใหม่กว่า <http://www.gnu.org/licenses/gpl."
-"html>\n"
-"นี่เป็นซอฟต์แวร์เสรี: คุณมีอิสระในการปรับเปลี่ยนและการส่งต่อมัน.\n"
-"มีการไม่รับประกัน, จากขอบเขตที่อนุญาตโดยกฎหมาย.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "เกิดความผิดพลาดของระบบที่ไม่รู้จักขึ้น"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: ตัวเลือก `%s' กำกวมไม่ชัดเจน\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: ตัวเลือก '--%s' ไม่อนุญาตให้มีอาร์กิวเมนต์\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: ตัวเลือก '%c%s' ไม่อนุญาตให้มีอาร์กิวเมนต์\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: ตัวเลือก '--%s' จำเป็นต้องมีอาร์กิวเมนต์\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: ไม่สามารถจดจำตัวเลือก `--%s' \n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: ไม่สามารถจดจำตัวเลือก '%c%s' ได้\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: ตัวเลือกไม่ถูกต้อง -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: ตัวเลือกที่ต้องการอาร์กิวเมนต์หนึ่งตัว -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: ตัวเลือก '-W %s' กำกวมไม่ชัดเจน\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: ตัวเลือก '-W %s' ไม่อนุญาตให้มีอาร์กิวเมนต์\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: ตัวเลือก '-W %s' จำเป็นต้องมีอาร์กิวเมนต์\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "เกิดข้อผิดพลาดในการเขียน"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "`"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "'"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "หน่วยความจำถูกใช้จนหมดแล้ว"
+++ /dev/null
-# Turkish translations for hello messages.
-# Copyright (C) 2007 Free Software Foundation, Inc.
-#
-# Nilgün Belma Bugüner <nilgun@buguner.name.tr>, 2001, ..., 2007.
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.3\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2007-07-09 11:16+0300\n"
-"Last-Translator: Nilgün Belma Bugüner <nilgun@buguner.name.tr>\n"
-"Language-Team: Turkish <gnu-tr-u12a@lists.sourceforge.net>\n"
-"Language: tr\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.11.4\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: fazladan terim: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Daha fazla bilgi için `%s --help' yazın.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "merhaba, dünya\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"┌─────────────────┐\n"
-"│ Merhaba, dünya! │\n"
-"└─────────────────┘\n"
-"Not:\n"
-"Bu iletiyi çizgiler içinde göremiyorsanız bir de\n"
-"export LANG=\"tr_TR.UTF-8\"\n"
-"unicode_start\n"
-"ile deneyin.\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Merhaba, dünya!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Kullanımı: %s [SEÇENEK]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "Dost canlısı, özelleştirilebilir bir karşılama iletisi basar.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help bu iletileri gösterir ve çıkar\n"
-" -v, --version sürümü gösterir ve çıkar\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional geleneksel karşılama biçemi kullanılır\n"
-" -n, --next-generation yeni nesil karşılama biçemi kullanılır\n"
-" -g, --greeting=METİN karşılama iletisi olarak METİN kullanılır\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr ""
-"Lütfen, yazılım hatalarını <%s>,\n"
-"çeviri hatalarını <gnu-tr@belgeler.org> adresine bildirin.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr ""
-"Lütfen, yazılım hatalarını <%s>,\n"
-"çeviri hatalarını <gnu-tr@belgeler.org> adresine bildirin.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Telif Hakkı © %s Free Software Foundation, Inc.\n"
-"Lisans: GNU GPL v3+ <http://www.gnu.org/licenses/gpl.html>\n"
-"Bu bir özgür yazılım olduğundan yasaların izin verdiği ölçüde\n"
-"herhangi bir garanti verilmemektedir.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Bilinmeyen sistem hatası"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: `%s' seçeneği belirsiz\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: `--%s' seçeneği argümansız kullanılır\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: `%c%s' argümansız kullanılır\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: `%s' seçeneği bir argümanla kullanılır\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: tanınmayan seçenek `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: tanınmayan seçenek `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: geçersiz seçenek -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: seçenek bir argümanla kullanılır -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: `-W %s' seçeneği belirsiz\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: `-W %s' seçeneği argümansız kullanılır\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: `%s' seçeneği bir argümanla kullanılır\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "yazma hatası"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "`"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "'"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "bellek tükendi"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: kuraldışı seçenek -- %c\n"
+++ /dev/null
-# Ukrainian translation of hello.
-# Copyright (C) 2004 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Igor Sachko <kick@tcs.com.ua>, 2004.
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.1.1\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2004-03-17 12:01+0200\n"
-"Last-Translator: Igor Sachko <kick@tcs.com.ua>\n"
-"Language-Team: Ukrainian <translation-team-uk@lists.sourceforge.net>\n"
-"Language: uk\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=koi8-u\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr ""
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "óÐÒÏÂÕÊÔÅ `%s --help' ÄÌÑ ÄÅÔÁÌØΦÛϧ ¦ÎÆÏÒÍÁæ§.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "ÐÒÉצÔ, ÓצÔ\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| ðÒÉצÔ, ÓצÔ! |\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "ðÒÉ×¦Ô ÓצÔ!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, fuzzy, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "÷ÉËÏÒÉÓÔÁÎÎÑ: %s [ðáòáíåôò]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr ""
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help ÐÏËÁÚÁÔÉ Ð¦ÄËÁÚËÕ ÔÁ ×ÉÊÔÉ\n"
-" -v, --version ÐÏËÁÚÁÔÉ ×ÅÒÓ¦À ÔÁ ×ÉÊÔÉ\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-#, fuzzy
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÔÒÁÄÉæÊÎÉÊ ÆÏÒÍÁÔ ×¦ÔÁÎÎÑ\n"
-" -n, --next-generation ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÎÏ×ÉÊ ÆÏÒÍÁÔ ×¦ÔÁÎÎÑ\n"
-" -m, --mail ÐÏËÁÚÁÔÉ ×ÁÛÕ ÐÏÛÔÕ\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, fuzzy, c-format
-msgid "Report bugs to: %s\n"
-msgstr "ðÒÏ ÐÏÍÉÌËÉ ÚצÔÕÊÔÅ ÎÁ <%s>.\n"
-
-#: src/hello.c:180
-#, fuzzy, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "ðÒÏ ÐÏÍÉÌËÉ ÚצÔÕÊÔÅ ÎÁ <%s>.\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr ""
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr ""
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr ""
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: ÐÁÒÁÍÅÔÒ `%s' ÎÅÚÒÏÚÕͦÌÉÊ\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, fuzzy, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: ÐÁÒÁÍÅÔÒ `--%s' ÎÅ ÄÏÚ×ÏÌѤ ÁÒÇÕÍÅÎÔ¦×\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, fuzzy, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: ÐÁÒÁÍÅÔÒ `%c%s' ÎÅ ÄÏÚ×ÏÌѤ ÁÒÇÕÍÅÎÔ¦×\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, fuzzy, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: ÐÁÒÁÍÅÔÒ `%s' ×ÉÍÁÇÁ¤ ÁÒÇÕÍÅÎÔ¦×\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, fuzzy, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: ÎÅצÄÏÍÉÊ ÐÁÒÁÍÅÔÒ `--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, fuzzy, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: ÎÅצÄÏÍÉÊ ÐÁÒÁÍÅÔÒ `%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, fuzzy, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: ÎÅצÒÎÉÊ ÐÁÒÁÍÅÔÒ -- %c\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, fuzzy, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: ÐÁÒÁÍÅÔÒ ×ÉÍÁÇÁ¤ ÁÒÇÕÍÅÎÔ -- %c\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, fuzzy, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: ÐÁÒÁÍÅÔÒ `-W %s' ÎÅÚÒÏÚÕͦÌÉÊ\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, fuzzy, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: ÐÁÒÁÍÅÔÒ `-W %s' ÎÅ ÄÏÚ×ÏÌѤ ÁÒÇÕÍÅÎÔ¦×\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, fuzzy, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: ÐÁÒÁÍÅÔÒ `%s' ×ÉÍÁÇÁ¤ ÁÒÇÕÍÅÎÔ¦×\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr ""
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr ""
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr ""
-
-#: lib/xalloc-die.c:34
-#, fuzzy
-msgid "memory exhausted"
-msgstr "%s: ÷¦ÒÔÕÁÌØÎÕ ÐÁÍ'ÑÔØ ×ÉÞÅÒÐÁÎÏ\n"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s: ÎÅצÒÎÉÊ ÐÁÒÁÍÅÔÒ -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "úÁÂÁÇÁÔÏ ÁÒÇÕÍÅÎÔ¦×\n"
-
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello, ÐÒÏÇÒÁÍÁ ÄÌÑ ÄÒÕËÕ ×¦ÔÁÎÎÑ.\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s: îÅÓÕͦÓΦ ÐÁÒÁÍÅÔÒÉ: -m ÔÁ -t\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s: èÔÏ ÔÉ?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s: îÅÍÏÖÌÉ×Ï ÚÎÁÊÔÉ ÆÁÊÌ Ú ×ÁÛÏÀ ÐÏÛÔÏÀ.\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "ôÕÔ Î¦ÞÏÇÏ ÎŠצÄÂÕ×Á¤ÔØÓÑ."
+++ /dev/null
-# Vietnamese Translation for Hello.
-# Copyright © 2012 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Clytie Siddall <clytie@riverland.net.au>, 2005-2010.
-# Trần Ngọc Quân <vnwildman@gmail.com>, 2012.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello-2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2012-03-01 14:44+0700\n"
-"Last-Translator: Trần Ngọc Quân <vnwildman@gmail.com>\n"
-"Language-Team: Vietnamese <vi-VN@googlegroups.com>\n"
-"Language: vi\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=1;\n"
-"X-Generator: LocFactoryEditor 1.8\n"
-"X-Poedit-Language: Vietnamese\n"
-"X-Poedit-Country: VIET NAM\n"
-"X-Poedit-SourceCharset: utf-8\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: toán tử bổ sung : %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "Hãy thử chạy câu lệnh `%s --help' để thấy thêm thông tin.\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "chào thế giới\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"+---------------+\n"
-"| Chào thế giới!|\n"
-"+---------------+\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "Chào thế giới !"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "Sử dụng: %s [TÙY CHỌN]...\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "In ra lời chào thân thiện có khả năng tùy chỉnh.\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help hiển thị trợ giúp này, sau đó thoát\n"
-" -v --version hiển thị thông tin phiên bản, sau đó thoát\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t --traditional dùng định dạng chào mừng truyền thống\n"
-" -n --next-generation dùng định dạng chào mừng kiểu mới\n"
-" -g, --greeting=CHUỖI dùng chuỗi này là lời chào mừng\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "Thông báo lỗi cho : %s\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "Thông báo lỗi %s cho : %s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "Trang chủ %s: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "Trang chủ %s: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr ""
-"Trợ giúp chung về sử dụng phần mềm GNU: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Tác quyền © %s Tổ chức Phần mềm Tự do.\n"
-"Giấy phép GPL pb3+ : Giấy phép Công cộng GNU phiên bản 3 hay sau\n"
-"<http://gnu.org/licenses/gpl.html>\n"
-"Đây là phần mềm tự do : bạn có quyền sửa đổi và phát hành lại nó.\n"
-"KHÔNG CÓ BẢO HÀNH GÌ CẢ, với điều khiển được pháp luật cho phép.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "Lỗi hệ thống không rõ"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: tùy chọn '%s' vẫn mơ hồ\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: tùy chọn `--%s' không cho phép đối số\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: tùy chọn '%c%s' không cho phép đối số\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: tùy chọn '--%s' yêu cầu một đối số\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: không nhận ra tùy chọn '--%s'\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: không nhận ra tùy chọn '%c%s'\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: tùy chọn không hợp lệ -- '%c'\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: tùy chọn yêu cầu một đối số -- '%c'\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: tùy chọn '-W %s' vẫn mơ hồ\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: tùy chọn '-W %s' không cho phép đối số\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: tùy chọn '-W %s' yêu cầu một đối số\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "lỗi ghi"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "'"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "'"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "cạn bộ nhớ"
+++ /dev/null
-# Simplified Chinese(zh-CN) messages for GNU Hello
-# Copyright (C) 2002 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Meng Jie <zuxyhere@eastday.com>, 2004.
-# Ji ZhengYu <zhengyuji@gmail.com>, 2008, 2009, 2010, 2011.
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2011-04-28 20:23+0800\n"
-"Last-Translator: Ji ZhengYu <zhengyuji@gmail.com>\n"
-"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
-"Language: zh_CN\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s: 参数太多: %s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "尝试‘%s --help’以获得更多信息。\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "世界你好\n"
-
-# TRANSLATORS: Use box drawing characters or other fancy stuff
-# if your encoding (e.g., UTF-8) allows it. If done so add the
-# following note, please:
-# [Note: For best viewing results use a UTF-8 locale, please.]
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"┌─────┐\n"
-"│世界你好!│\n"
-"└─────┘\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "世界你好!"
-
-# TRANSLATORS: --help output 2
-# no-wrap
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "用法:%s [选项]\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "输出一个友好且自定义的问候词。\n"
-
-# TRANSLATORS: --help output 3 : options 1/2
-# no-wrap
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h,--help 显示此帮助并退出\n"
-" -v,--version 显示版本信息并退出\n"
-
-# TRANSLATORS: --help output 4 : options 2/2
-# no-wrap
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional 使用传统的问候格式\n"
-" -n, --next-generation 使用新型的问候格式\n"
-" -g, --greeting=TEXT 使用 TEXT 作为问候语\n"
-
-# TRANSLATORS: --help output 5 (end)
-# TRANSLATORS, please don't forget to add the contact address for
-# your translation!
-# no-wrap
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "将程序缺陷报告给: %s\n"
-
-# TRANSLATORS: --help output 5 (end)
-# TRANSLATORS, please don't forget to add the contact address for
-# your translation!
-# no-wrap
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "将 %s 缺陷报告给: %s。\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s 主页: <%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s 主页: <http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr "使用GNU 软件的通用帮助: <http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "未知的系统错误"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s: 选项\"%s\"有歧义\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s: 选项\"--%s\"不要参数\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s: 选项\"%c%s\"不要参数\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s: 选项\"--%s\" 必须带参数。\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s: 无法识别的选项\"--%s\"\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s: 无法识别的选项\"%c%s\"\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s: 选项无效 -- \"%c\"\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s: 选项必须带参数 -- \"%c\"\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s: 选项\"-W %s\"有歧义\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s: 选项\"-W %s\"不要参数\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s: 选项\"-W %s\" 必须带参数。\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "写错误"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "‘"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "’"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "虚拟内存已耗尽"
-
-#~ msgid "%s: illegal option -- %c\n"
-#~ msgstr "%s:非法选项 -- %c\n"
-
-#~ msgid "Too many arguments\n"
-#~ msgstr "参数太多\n"
-
-# TRANSLATORS: --help output 1
-# no-wrap
-#~ msgid "GNU hello, THE greeting printing program.\n"
-#~ msgstr "GNU hello,打印问候语的程序。\n"
-
-#~ msgid ""
-#~ "Copyright (C) %s Free Software Foundation, Inc.\n"
-#~ "There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A\n"
-#~ "PARTICULAR PURPOSE. You may redistribute copies of GNU %s under the "
-#~ "terms\n"
-#~ "of the GNU General Public License.\n"
-#~ "For more information about these matters, see the file named COPYING.\n"
-#~ msgstr ""
-#~ "版权所有 (C) %s 自由软件基金会\n"
-#~ "无任何担保,特别是不对其销路作担保,也不对其在特定目的下\n"
-#~ "的适用性作担保。\n"
-#~ "您可以按照 GNU 通用公共许可的条款重新分发 GNU %s 的副本。\n"
-#~ "有关这些事宜的更多的信息,请参阅名为 COPYING 的文件。\n"
-
-#~ msgid "%s: Incompatible flags: -m and -t\n"
-#~ msgstr "%s:标记 -m 和 -t 矛盾\n"
-
-#~ msgid "%s: Who are you?\n"
-#~ msgstr "%s:你是谁?\n"
-
-#~ msgid "%s: Cannot find your mail spool file.\n"
-#~ msgstr "%s:找不到您的邮件卷轴文件。\n"
-
-#~ msgid "Nothing happens here."
-#~ msgstr "这儿什么也没发生。"
+++ /dev/null
-# Traditional Chinese Messages for hello.
-# Copyright (C) 2005 Free Software Foundation, Inc.
-# This file is distributed under the same license as the hello package.
-# Wei-Lun Chao <chaoweilun@gmail.com>, 2005, 2007, 2012.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: hello 2.7\n"
-"Report-Msgid-Bugs-To: bug-hello@gnu.org\n"
-"POT-Creation-Date: 2012-04-19 14:45+0100\n"
-"PO-Revision-Date: 2012-04-11 23:03+0800\n"
-"Last-Translator: Wei-Lun Chao <chaoweilun@gmail.com>\n"
-"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
-"Language: zh_TW\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=1; plural=0;\n"
-
-#: src/hello.c:98
-#, c-format
-msgid "%s: extra operand: %s\n"
-msgstr "%s:其他運算元:%s\n"
-
-#: src/hello.c:100
-#, c-format
-msgid "Try `%s --help' for more information.\n"
-msgstr "請嘗試執行「%s --help」以獲得更多資訊。\n"
-
-#: src/hello.c:107
-#, c-format
-msgid "hello, world\n"
-msgstr "哈囉,大家好\n"
-
-#. TRANSLATORS: Use box drawing characters or other fancy stuff
-#. if your encoding (e.g., UTF-8) allows it. If done so add the
-#. following note, please:
-#.
-#. [Note: For best viewing results use a UTF-8 locale, please.]
-#.
-#: src/hello.c:116
-#, c-format
-msgid ""
-"+---------------+\n"
-"| Hello, world! |\n"
-"+---------------+\n"
-msgstr ""
-"┌──────────────┐\n"
-"│哈囉,大家好!│\n"
-"└──────────────┘\n"
-
-#: src/hello.c:126
-msgid "Hello, world!"
-msgstr "哈囉,大家好!"
-
-#. TRANSLATORS: --help output 1 (synopsis)
-#. no-wrap
-#: src/hello.c:148
-#, c-format
-msgid "Usage: %s [OPTION]...\n"
-msgstr "用法:%s [選項]…\n"
-
-#. TRANSLATORS: --help output 2 (brief description)
-#. no-wrap
-#: src/hello.c:153
-msgid "Print a friendly, customizable greeting.\n"
-msgstr "印出友善的自訂問候。\n"
-
-#. TRANSLATORS: --help output 3: options 1/2
-#. no-wrap
-#: src/hello.c:159
-msgid ""
-" -h, --help display this help and exit\n"
-" -v, --version display version information and exit\n"
-msgstr ""
-" -h, --help 顯示此說明然後離開\n"
-" -v, --version 顯示版本資訊然後離開\n"
-
-#. TRANSLATORS: --help output 4: options 2/2
-#. no-wrap
-#: src/hello.c:166
-msgid ""
-" -t, --traditional use traditional greeting format\n"
-" -n, --next-generation use next-generation greeting format\n"
-" -g, --greeting=TEXT use TEXT as the greeting message\n"
-msgstr ""
-" -t, --traditional 使用傳統問候格式\n"
-" -n, --next-generation 使用下一代問候格式\n"
-" -g, --greeting=TEXT 使用 TEXT 做為問候訊息\n"
-
-#. TRANSLATORS: --help output 5+ (reports)
-#. TRANSLATORS: the placeholder indicates the bug-reporting address
-#. for this application. Please add _another line_ with the
-#. address for translation bugs.
-#. no-wrap
-#: src/hello.c:177
-#, c-format
-msgid "Report bugs to: %s\n"
-msgstr "請將錯誤回報給:%s\n"
-
-#: src/hello.c:180
-#, c-format
-msgid "Report %s bugs to: %s\n"
-msgstr "請將 %s 項錯誤回報給:%s\n"
-
-#: src/hello.c:184
-#, c-format
-msgid "%s home page: <%s>\n"
-msgstr "%s 的首頁:<%s>\n"
-
-#: src/hello.c:186
-#, c-format
-msgid "%s home page: <http://www.gnu.org/software/%s/>\n"
-msgstr "%s 的首頁:<http://www.gnu.org/software/%s/>\n"
-
-#: src/hello.c:189
-msgid "General help using GNU software: <http://www.gnu.org/gethelp/>\n"
-msgstr "使用 GNU 軟體的一般說明:<http://www.gnu.org/gethelp/>\n"
-
-#: src/hello.c:207
-#, c-format
-msgid ""
-"Copyright (C) %s Free Software Foundation, Inc.\n"
-"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
-"html>\n"
-"This is free software: you are free to change and redistribute it.\n"
-"There is NO WARRANTY, to the extent permitted by law.\n"
-msgstr ""
-"著作權 (C) %s 自由軟體基金會。\n"
-"授權 GPLv3+: GNU GPL 第三版或後續版本 <http://gnu.org/licenses/gpl.html>\n"
-"此為自由軟體:您可以自由變更和再次散布它。\n"
-"在法律所允許的範圍內,不做任何擔保。\n"
-
-#: lib/error.c:188
-msgid "Unknown system error"
-msgstr "不明的系統錯誤"
-
-#: lib/getopt.c:547 lib/getopt.c:576
-#, fuzzy, c-format
-msgid "%s: option '%s' is ambiguous; possibilities:"
-msgstr "%s:選項「%s」為模稜兩可的\n"
-
-#: lib/getopt.c:624 lib/getopt.c:628
-#, c-format
-msgid "%s: option '--%s' doesn't allow an argument\n"
-msgstr "%s:選項「--%s」不允許使用引數\n"
-
-#: lib/getopt.c:637 lib/getopt.c:642
-#, c-format
-msgid "%s: option '%c%s' doesn't allow an argument\n"
-msgstr "%s:選項「%c%s」不允許使用引數\n"
-
-#: lib/getopt.c:685 lib/getopt.c:704
-#, c-format
-msgid "%s: option '--%s' requires an argument\n"
-msgstr "%s:選項「--%s」需要一個引數\n"
-
-#: lib/getopt.c:742 lib/getopt.c:745
-#, c-format
-msgid "%s: unrecognized option '--%s'\n"
-msgstr "%s:無法辨識的選項「--%s」\n"
-
-#: lib/getopt.c:753 lib/getopt.c:756
-#, c-format
-msgid "%s: unrecognized option '%c%s'\n"
-msgstr "%s:無法辨識的選項「%c%s」\n"
-
-#: lib/getopt.c:805 lib/getopt.c:808
-#, c-format
-msgid "%s: invalid option -- '%c'\n"
-msgstr "%s:無效的選項 -- 「%c」\n"
-
-#: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106
-#, c-format
-msgid "%s: option requires an argument -- '%c'\n"
-msgstr "%s:選項需要一個引數 -- 「%c」\n"
-
-#: lib/getopt.c:934 lib/getopt.c:950
-#, c-format
-msgid "%s: option '-W %s' is ambiguous\n"
-msgstr "%s:選項「-W %s」為模稜兩可的\n"
-
-#: lib/getopt.c:974 lib/getopt.c:992
-#, c-format
-msgid "%s: option '-W %s' doesn't allow an argument\n"
-msgstr "%s:選項「-W %s」不允許使用引數\n"
-
-#: lib/getopt.c:1013 lib/getopt.c:1031
-#, c-format
-msgid "%s: option '-W %s' requires an argument\n"
-msgstr "%s:選項「-W %s」需要一個引數\n"
-
-#: lib/closeout.c:112
-msgid "write error"
-msgstr "寫入錯誤"
-
-#. TRANSLATORS:
-#. Get translations for open and closing quotation marks.
-#. The message catalog should translate "`" to a left
-#. quotation mark suitable for the locale, and similarly for
-#. "'". For example, a French Unicode local should translate
-#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE
-#. QUOTATION MARK), respectively.
-#.
-#. If the catalog has no translation, we will try to
-#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and
-#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the
-#. current locale is not Unicode, locale_quoting_style
-#. will quote 'like this', and clocale_quoting_style will
-#. quote "like this". You should always include translations
-#. for "`" and "'" even if U+2018 and U+2019 are appropriate
-#. for your locale.
-#.
-#. If you don't know what to put here, please see
-#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages>
-#. and use glyphs suitable for your language.
-#: lib/quotearg.c:312
-msgid "`"
-msgstr "「"
-
-#: lib/quotearg.c:313
-msgid "'"
-msgstr "」"
-
-#: lib/xalloc-die.c:34
-msgid "memory exhausted"
-msgstr "記憶體已耗盡"
+++ /dev/null
-2011-03-22 Karl Berry <karl@gnu.org>
-
- * hello.c (print_version): it's 2011.
-
-2010-01-31 Karl Berry <karl@gnu.org>
-
- * hello.c (print_help): add lines for the package home page,
- general help, etc. Support packager-specific messages
- a la version-etc in gnulib.
-
-2008-11-28 Karl Berry <karl@gnu.org>
-
- * hello.c (greeting_type): new type.
- (main): make last greeting option be the one that counts.
-
-2007-06-26 Karl Berry <karl@gnu.org>
-
- * hello.c (print_version): update notice in --version.
-
-2006-12-11 Karl Berry <karl@gnu.org>
-
- * hello.c: /dev/full, not /dev/null. Report from Reinder Verlinde,
- 10 Dec 2006 11:33:26 +0100.
-
-2006-11-13 Karl Berry <karl@gnu.org>
-
- * hello.c (main): reinstall #if ENABLE_NLS, to avoid
- warnings with --disable-nls CPPFLAGS=-Wall. An alternative would
- be to #define them away in system.h. From Bruno Haible.
-
-2006-11-09 Eric Blake <ebb9@byu.net>
-
- * hello.c (main): Use atexit, to avoid warning with 'gcc -Wall
- -Werror'.
- (my_exit): Delete, no longer needed.
-
-2006-11-09 Paul Eggert <eggert@cs.ucla.edu>
-
- * hello.c (main): Make greeting const char *, to avoid
- a violation of the C standard when assigning _("...") to it.
- Remove unnecessary #if ENABLE_NLS bracket.
- If too many operands are given, report our name, and the first
- extra one.
-
-2006-10-18 Karl Berry <karl@gnu.org>
-
- * hello.c (print_version, print_help, my_exit): new fns.
- (main): use them.
-
-2006-10-16 Bruno Haible <bruno@clisp.org>
-
- * hello.c (main): Remove HAVE_SETLOCALE conditional.
-
-2006-10-16 Karl Berry <karl@gnu.org>
-
- * hello.c (main): compare getopt_long result to -1, not EOF, since
- EOF might not be -1. Use NULL instead of (int *)0. Both
- suggestions from Eric Blake.
-
-2006-08-29 Karl Berry <karl@gnu.org>
-
- * hello.c (main) <--help output>: say that translators should add
- another line for translation bugs. Suggestion from Clytie
- Siddall, 29 Aug 2006 17:31:37 +0930.
-
-2006-08-23 Karl Berry <karl@gnu.org>
-
- * hello.c (main): remove extra argument passed to printf in
- version output.
-
-2006-08-23 Bruno Haible <bruno@clisp.org>
-
- * hello.c (program_name): Renamed from progname. Make non-static.
- (main): Update.
-
-2006-08-23 Bruno Haible <bruno@clisp.org>
-
- * system.h: Fix double-inclusion guard. Improve comments.
- * hello.c (longopts): Make const and static.
- (main): Convert to ANSI C definition.
-
-2006-08-20 Karl Berry <karl@gnu.org>
-
- * hello.c (main): try a new style for the --version output.
-
- * hello.c (main): do not exit(0) prematurely with --help or
- --version, we need to go through close_stdout.
-
-2006-07-16 Karl Berry <karl@gnu.org>
-
- * system.h: #include "closeout.h".
- * hello.c (main): call close_stdout, to get an error at exit.
-
- * Makefile.am (hello_LDADD): link with libgnu.a, not libgnulib.a.
-
-2006-07-15 Karl Berry <karl@gnu.org>
-
- * hello.c: remove most of the includes, no longer needed.
- * system.h: move system includes to here.
- * version.c: remove, just use the VERSION autotool variable.
- * Makefile.am (hello_SOURCES): remove version.c
-
- * hello.c (main): update copyright to 2006.
-
-2006-05-03 Karl Berry <karl@gnu.org>
-
- * Makefile.am (noinst_HEADERS): remove, gettext.h comes from gnulib.
- (hello_LDADD): remove @ALLOCA@.
- * hello.c: remove mail reading stuff, and hence alloca stuff.
-
- * getopt*.c, gettext.h: remove these files, they come from gnulib.
-
-2005-08-19 Karl Berry <karl@gnu.org>
-
- * src/hello.c (main): version message formatting.
-
-2002-07-20 Karl Eichwalder <ke@gnu.franken.de>
-
- * Makefile.am (noinst_HEADERS): New variable. add gettext.h
- * hello.c: Include gettext.h.
-
-2002-05-22 Karl Eichwalder <keichwa@gmx.net>
-
- * alloca.c: Update (provided by Paul Eggert).
- * getopt1.c: Likewise.
- * getopt.h: Likewise.
- * getopt.c: Likewise.
-
-2002-05-22 Karl Eichwalder <keichwa@gmx.net>
-
- * Makefile.am (hello_LDADD): Use @LIBINTL@ instead of @INTLLIBS@;
- recommended by gettextize.
-
-2002-02-02 Karl Eichwalder <keichwa@gmx.net>
-
- * hello.c: Add "TRANSLATORS: " tag instead of "TRANS: " to make
- it visible to standard xgettext settings.
- Reported by Bruno Haible.
-
-2002-01-27 Karl Eichwalder <ke@gmx.net>
-
- * hello.c (main): Add next-generation greeting format using the
- switches -n, --next-generation.
-
-2001-06-23 Karl Eichwalder <keichwa@gmx.net>
-
- * hello.c (main): Adjust Copyright dates.
-
- * hello.c (main): Use PACKAGE_BUGREPORT.
-
- * Makefile.am (DEFS): New variable. Define LOCALEDIR here.
- (INCLUDES): Don't define LOCALEDIR here. Add -I.. and -I$(srcdir)
- and -I$(top_srcdir)/intl.
-
-2001-05-24 Karl Eichwalder <keichwa@gmx.net>
-
- * hello.c (main): Avoid leading newlines inside of translatable
- strings.
-
-2001-05-21 Karl Eichwalder <keichwa@gmx.net>
-
- * hello.c: Include unistd.h if available to avoid warning under
- BeOS.
- Patch by Bruno Haible.
-
- * hello.c: Include libintl.h only, if ENABLE_NLS is true.
- Otherwise it isn't possible to build hello with --disable-nls.
- Use gettext() if ENABLE_NLS is true.
- (main): Only call bindtextdomain and textdomain if ENABLE_NLS is true.
- Patch by Bruno Haible.
-
-
-2000-09-24 Karl Eichwalder <keichwa@gmx.net>
-
- * hello.c (main): Comment for the translators to add their contact
- address.
-
-2000-03-13 Karl EICHWALDER <ke@gnu.franken.de>
-
- * hello.c (main): Split help output string and add comments to
- please the translators.
-
- * getopt1.c getopt.h getopt.c alloca.c: Update files from
- libit-0.6.
- version-etc.c version-etc.h: New files from libit-0.6.
-
-1999-10-15 Karl Eichwalder <ke@gnu.franken.de>
-
- * hello.c (main): Adjust year of the Copyright statement.
-
-1998-12-11 Karl Eichwalder <ke@suse.de>
-
- * hello.c (main): Warn about the incompatible flag set {-m,
- -t} (patch by John Bley <jbb6@acpub.duke.edu>, thanks!).
-
-Sun May 25 19:15:47 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c (main): Adjust list of release years.
-
-Sat Mar 22 11:18:52 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am: General simplification:
- (noinst_HEADERS, hello_DEPENDENCIES, EXTRA_DIST, datadir, LDADD,
- DEFS): Delete variables.
- (hello_SOURCES): Add getopt.h system.h.
- (hello_LDADD): New variable. Add @INTLLIBS@ @ALLOCA@.
- (INCLUDES): Remove `-I$(srcdir) -I..'; add `-DLOCALEDIR=\"$(localedir)\"'.
- ($(bin_PROGRAMS)): Delete target.
-
-Sat Feb 22 18:19:40 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (LDADD): use @INTLLIBS@, so it's possible to
- `configure --disable-nls'.
- ($(bin_PROGRAMS)): use $(LDADD).
-
-Sat Jan 25 16:18:04 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c (main): Don't compute the program name for version
- output from `argv[0]'; `--help' ignores the other options (Coding
- Standards).
-
-Sun Jan 19 12:10:46 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c (main): Tweak the copyright notice. Mention only the
- most recent year in which changes were made (according to the
- Coding Standards).
- Don't start error messages with capital letters.
-
-Thu Jan 9 17:56:06 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c (main): Correct the address for reporting bugs.
-
-Mon Jan 6 09:09:23 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c: Only include xmalloc() when ifdef C_ALLOCA (thanks to
- Kaveh R. Ghazi <ghazi@caip.rutgers.edu>).
-
-Sun Jan 5 09:50:57 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c (main): Add spurious \n to "Copyright...".
-
-Sat Jan 4 09:25:07 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (LDADD): Add @ALLOCA@, reported by Kaveh R. Ghazi
- <ghazi@caip.rutgers.edu>.
-
-Tue Dec 31 09:00:13 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c (main): Add address for reporting bugs to the --help
- message.
-
-Mon Dec 30 17:26:44 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (EXTRA_DIST): Remove testdata.
-
- * testdata: Move to ../tests/.
-
-Wed Dec 18 14:02:25 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c (main): add "1993", reported by Karl Berry
- <karl@cs.umb.edu> (1993-06-02 12:42:13 -0400).
- (main): Don't let `hello -m' loop forever when MAIL wasn't in the
- env and the 1st element of `dirs' didn't exist; reported (and
- solved) by several hello users. Use the patch provided by
- amc@ecl.wustl.edu (Adam Costello)--it offers an additional message
- to translate--and use a part of Bart Robinson's
- <lomew@kira.cs.utah.edu> ChangeLog entry.
-
-Tue Dec 17 16:54:17 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (EXTRA_DIST): add alloca.c.
- (hello_SOURCES): remove @ALLOCA@.
- (hello_DEPENDENCIES): add @ALLOCA@.
-
-Mon Dec 16 21:10:36 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (hello_SOURCES): replace alloca.c with @ALLOCA@.
-
- * alloca.c: new file from textutils-1.20, recommended by Kaveh
- R. Ghazi <ghazi@caip.rutgers.edu>.
-
- * hello.c: include <sys/param.h> if HAVE_SYS_PARAM_H, include
- "system.h" not earlier than <sys/param.h>.
- (main): use ST_BLKSIZE, both reported by Kaveh R. Ghazi
- <ghazi@caip.rutgers.edu>.
-
-Thu Dec 5 16:15:56 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c: include <config.h> if HAVE_CONFIG_H and <locale.h> if
- HAVE_LOCALE_H.
- (main): adjust --help tableau.
- (main): Change --version output to what is required by
- GNU standards.
-
- * getopt.h, getopt.c, getopt1.c: New files from the GNU C Library.
-
- * hello.c (main): setlocale if HAVE_SETLOCALE.
-
- * Makefile.am new file.
- (bin_PROGRAMS, noinst_HEADERS, hello_SOURCES, EXTRA_DIST, datadir,
- localedir, INCLUDES, DEFS, LDADD): set.
- ($(bin_PROGRAMS)): new target.
-
-Mon Dec 2 19:55:02 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.in (HDRS): add system.h.
-
- * system.h: New file (contributed by Kaveh R. Ghazi
- <ghazi@caip.rutgers.edu>).
-
-Sat Nov 30 17:45:18 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c (main): avoid illegal ptr/int combinations on alloca()
- (hints from Kaveh R. Ghazi <ghazi@caip.rutgers.edu>).
-
- * getopt.c: #include <libintl.h> (proposed by Kaveh R. Ghazi
- <ghazi@caip.rutgers.edu>).
-
-Tue Mar 5 10:55:20 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.in (check): Set LANGUAGE and LC_ALL (proposed by Ulrich
- Drepper <drepper@gnu.ai.mit.edu>).
-
- * testdata: Remove spurious newline.
-
- * hello.c: Stilistical chances (proposed by Ulrich Drepper
- <drepper@gnu.ai.mit.edu>).
-
- * Makefile.in (VPATH): Add variable (reported by Ulrich Drepper
- <drepper@gnu.ai.mit.edu>).
-
- * hello.c (main): New order for help info.
-
- * Makefile.in (prefix): Add variable.
-
-Sun Mar 3 11:49:01 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * hello.c (main): read version information using settings in
- config.h.
-
- * version.c (version): read version number from config.h.
-
- * Makefile.in (DISTFILES): Don't distribute TAGS.
-
- * hello.c (main): Add /var/spool/mail.
-
-Tue Dec 19 08:26:09 1995 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.in: New file.
-
-Copyright 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2005, 2006, 2008
-Free Software Foundation, Inc.
-
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
+++ /dev/null
-# Makefile.am for hello/src.
-#
-# Copyright 1996, 1997, 2001, 2005, 2006, 2007, 2008 Free Software
-# Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-bin_PROGRAMS = hello
-hello_SOURCES = hello.c system.h
-
-hello_LDADD = $(LIBINTL) $(top_builddir)/lib/lib$(PACKAGE).a
-
-localedir = $(datadir)/locale
-
-AM_CPPFLAGS = -I$(top_srcdir)/lib -I$(top_builddir)/lib
-DEFS = -DLOCALEDIR=\"$(localedir)\" @DEFS@
+++ /dev/null
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile.am for hello/src.
-#
-# Copyright 1996, 1997, 2001, 2005, 2006, 2007, 2008 Free Software
-# Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = hello$(EXEEXT)
-subdir = src
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
- $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \
- $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/configmake.m4 \
- $(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \
- $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-o.m4 \
- $(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/getopt.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/gnulib-common.m4 \
- $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \
- $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
- $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/locale-fr.m4 \
- $(top_srcdir)/m4/locale-ja.m4 $(top_srcdir)/m4/locale-zh.m4 \
- $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \
- $(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/msvc-inval.m4 \
- $(top_srcdir)/m4/msvc-nothrow.m4 $(top_srcdir)/m4/nls.m4 \
- $(top_srcdir)/m4/nocrash.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quotearg.m4 \
- $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdbool.m4 \
- $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
- $(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
- $(top_srcdir)/m4/sys_socket_h.m4 $(top_srcdir)/m4/unistd_h.m4 \
- $(top_srcdir)/m4/warn-on-use.m4 $(top_srcdir)/m4/wchar_h.m4 \
- $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype_h.m4 \
- $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_hello_OBJECTS = hello.$(OBJEXT)
-hello_OBJECTS = $(am_hello_OBJECTS)
-am__DEPENDENCIES_1 =
-hello_DEPENDENCIES = $(am__DEPENDENCIES_1) \
- $(top_builddir)/lib/lib$(PACKAGE).a
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(hello_SOURCES)
-DIST_SOURCES = $(hello_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-pkglibexecdir = @pkglibexecdir@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-ARFLAGS = @ARFLAGS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CONFIG_INCLUDE = @CONFIG_INCLUDE@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = -DLOCALEDIR=\"$(localedir)\" @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
-EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
-ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
-ENOLINK_VALUE = @ENOLINK_VALUE@
-EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
-EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
-ERRNO_H = @ERRNO_H@
-EXEEXT = @EXEEXT@
-GETOPT_H = @GETOPT_H@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GNULIB_ATOLL = @GNULIB_ATOLL@
-GNULIB_BTOWC = @GNULIB_BTOWC@
-GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
-GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
-GNULIB_CHDIR = @GNULIB_CHDIR@
-GNULIB_CHOWN = @GNULIB_CHOWN@
-GNULIB_CLOSE = @GNULIB_CLOSE@
-GNULIB_DUP = @GNULIB_DUP@
-GNULIB_DUP2 = @GNULIB_DUP2@
-GNULIB_DUP3 = @GNULIB_DUP3@
-GNULIB_ENVIRON = @GNULIB_ENVIRON@
-GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
-GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
-GNULIB_FCHDIR = @GNULIB_FCHDIR@
-GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
-GNULIB_FDATASYNC = @GNULIB_FDATASYNC@
-GNULIB_FFSL = @GNULIB_FFSL@
-GNULIB_FFSLL = @GNULIB_FFSLL@
-GNULIB_FSYNC = @GNULIB_FSYNC@
-GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
-GNULIB_GETCWD = @GNULIB_GETCWD@
-GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
-GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
-GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
-GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
-GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
-GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
-GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
-GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
-GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
-GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
-GNULIB_GL_UNISTD_H_GETOPT = @GNULIB_GL_UNISTD_H_GETOPT@
-GNULIB_GRANTPT = @GNULIB_GRANTPT@
-GNULIB_GROUP_MEMBER = @GNULIB_GROUP_MEMBER@
-GNULIB_ISATTY = @GNULIB_ISATTY@
-GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
-GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
-GNULIB_LCHOWN = @GNULIB_LCHOWN@
-GNULIB_LINK = @GNULIB_LINK@
-GNULIB_LINKAT = @GNULIB_LINKAT@
-GNULIB_LSEEK = @GNULIB_LSEEK@
-GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
-GNULIB_MBRLEN = @GNULIB_MBRLEN@
-GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
-GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
-GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
-GNULIB_MBSCHR = @GNULIB_MBSCHR@
-GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
-GNULIB_MBSINIT = @GNULIB_MBSINIT@
-GNULIB_MBSLEN = @GNULIB_MBSLEN@
-GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
-GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
-GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
-GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
-GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
-GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
-GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
-GNULIB_MBSSEP = @GNULIB_MBSSEP@
-GNULIB_MBSSPN = @GNULIB_MBSSPN@
-GNULIB_MBSSTR = @GNULIB_MBSSTR@
-GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
-GNULIB_MBTOWC = @GNULIB_MBTOWC@
-GNULIB_MEMCHR = @GNULIB_MEMCHR@
-GNULIB_MEMMEM = @GNULIB_MEMMEM@
-GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
-GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
-GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
-GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
-GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
-GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
-GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
-GNULIB_PIPE = @GNULIB_PIPE@
-GNULIB_PIPE2 = @GNULIB_PIPE2@
-GNULIB_POSIX_OPENPT = @GNULIB_POSIX_OPENPT@
-GNULIB_PREAD = @GNULIB_PREAD@
-GNULIB_PTSNAME = @GNULIB_PTSNAME@
-GNULIB_PTSNAME_R = @GNULIB_PTSNAME_R@
-GNULIB_PUTENV = @GNULIB_PUTENV@
-GNULIB_PWRITE = @GNULIB_PWRITE@
-GNULIB_RANDOM = @GNULIB_RANDOM@
-GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
-GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
-GNULIB_READ = @GNULIB_READ@
-GNULIB_READLINK = @GNULIB_READLINK@
-GNULIB_READLINKAT = @GNULIB_READLINKAT@
-GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
-GNULIB_REALPATH = @GNULIB_REALPATH@
-GNULIB_RMDIR = @GNULIB_RMDIR@
-GNULIB_RPMATCH = @GNULIB_RPMATCH@
-GNULIB_SETENV = @GNULIB_SETENV@
-GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
-GNULIB_SLEEP = @GNULIB_SLEEP@
-GNULIB_STPCPY = @GNULIB_STPCPY@
-GNULIB_STPNCPY = @GNULIB_STPNCPY@
-GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
-GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
-GNULIB_STRDUP = @GNULIB_STRDUP@
-GNULIB_STRERROR = @GNULIB_STRERROR@
-GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
-GNULIB_STRNCAT = @GNULIB_STRNCAT@
-GNULIB_STRNDUP = @GNULIB_STRNDUP@
-GNULIB_STRNLEN = @GNULIB_STRNLEN@
-GNULIB_STRPBRK = @GNULIB_STRPBRK@
-GNULIB_STRSEP = @GNULIB_STRSEP@
-GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
-GNULIB_STRSTR = @GNULIB_STRSTR@
-GNULIB_STRTOD = @GNULIB_STRTOD@
-GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
-GNULIB_STRTOLL = @GNULIB_STRTOLL@
-GNULIB_STRTOULL = @GNULIB_STRTOULL@
-GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
-GNULIB_SYMLINK = @GNULIB_SYMLINK@
-GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
-GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
-GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
-GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
-GNULIB_UNISTD_H_NONBLOCKING = @GNULIB_UNISTD_H_NONBLOCKING@
-GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
-GNULIB_UNLINK = @GNULIB_UNLINK@
-GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
-GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
-GNULIB_UNSETENV = @GNULIB_UNSETENV@
-GNULIB_USLEEP = @GNULIB_USLEEP@
-GNULIB_WCPCPY = @GNULIB_WCPCPY@
-GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
-GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
-GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
-GNULIB_WCSCAT = @GNULIB_WCSCAT@
-GNULIB_WCSCHR = @GNULIB_WCSCHR@
-GNULIB_WCSCMP = @GNULIB_WCSCMP@
-GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
-GNULIB_WCSCPY = @GNULIB_WCSCPY@
-GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
-GNULIB_WCSDUP = @GNULIB_WCSDUP@
-GNULIB_WCSLEN = @GNULIB_WCSLEN@
-GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
-GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
-GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
-GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
-GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
-GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
-GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
-GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
-GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
-GNULIB_WCSSPN = @GNULIB_WCSSPN@
-GNULIB_WCSSTR = @GNULIB_WCSSTR@
-GNULIB_WCSTOK = @GNULIB_WCSTOK@
-GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
-GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
-GNULIB_WCTOB = @GNULIB_WCTOB@
-GNULIB_WCTOMB = @GNULIB_WCTOMB@
-GNULIB_WCTRANS = @GNULIB_WCTRANS@
-GNULIB_WCTYPE = @GNULIB_WCTYPE@
-GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
-GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
-GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
-GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
-GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
-GNULIB_WMEMSET = @GNULIB_WMEMSET@
-GNULIB_WRITE = @GNULIB_WRITE@
-GNULIB__EXIT = @GNULIB__EXIT@
-GREP = @GREP@
-HAVE_ATOLL = @HAVE_ATOLL@
-HAVE_BTOWC = @HAVE_BTOWC@
-HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
-HAVE_CHOWN = @HAVE_CHOWN@
-HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
-HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
-HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
-HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
-HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
-HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
-HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
-HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
-HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
-HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
-HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
-HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
-HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
-HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
-HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
-HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
-HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
-HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
-HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
-HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
-HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
-HAVE_DUP2 = @HAVE_DUP2@
-HAVE_DUP3 = @HAVE_DUP3@
-HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
-HAVE_FACCESSAT = @HAVE_FACCESSAT@
-HAVE_FCHDIR = @HAVE_FCHDIR@
-HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
-HAVE_FDATASYNC = @HAVE_FDATASYNC@
-HAVE_FEATURES_H = @HAVE_FEATURES_H@
-HAVE_FFSL = @HAVE_FFSL@
-HAVE_FFSLL = @HAVE_FFSLL@
-HAVE_FSYNC = @HAVE_FSYNC@
-HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
-HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
-HAVE_GETGROUPS = @HAVE_GETGROUPS@
-HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
-HAVE_GETLOGIN = @HAVE_GETLOGIN@
-HAVE_GETOPT_H = @HAVE_GETOPT_H@
-HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
-HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
-HAVE_GRANTPT = @HAVE_GRANTPT@
-HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
-HAVE_ISWBLANK = @HAVE_ISWBLANK@
-HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
-HAVE_LCHOWN = @HAVE_LCHOWN@
-HAVE_LINK = @HAVE_LINK@
-HAVE_LINKAT = @HAVE_LINKAT@
-HAVE_MBRLEN = @HAVE_MBRLEN@
-HAVE_MBRTOWC = @HAVE_MBRTOWC@
-HAVE_MBSINIT = @HAVE_MBSINIT@
-HAVE_MBSLEN = @HAVE_MBSLEN@
-HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
-HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
-HAVE_MEMCHR = @HAVE_MEMCHR@
-HAVE_MEMPCPY = @HAVE_MEMPCPY@
-HAVE_MKDTEMP = @HAVE_MKDTEMP@
-HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
-HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
-HAVE_MKSTEMP = @HAVE_MKSTEMP@
-HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
-HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
-HAVE_OS_H = @HAVE_OS_H@
-HAVE_PIPE = @HAVE_PIPE@
-HAVE_PIPE2 = @HAVE_PIPE2@
-HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
-HAVE_PREAD = @HAVE_PREAD@
-HAVE_PTSNAME = @HAVE_PTSNAME@
-HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
-HAVE_PWRITE = @HAVE_PWRITE@
-HAVE_RANDOM = @HAVE_RANDOM@
-HAVE_RANDOM_H = @HAVE_RANDOM_H@
-HAVE_RANDOM_R = @HAVE_RANDOM_R@
-HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
-HAVE_READLINK = @HAVE_READLINK@
-HAVE_READLINKAT = @HAVE_READLINKAT@
-HAVE_REALPATH = @HAVE_REALPATH@
-HAVE_RPMATCH = @HAVE_RPMATCH@
-HAVE_SETENV = @HAVE_SETENV@
-HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
-HAVE_SLEEP = @HAVE_SLEEP@
-HAVE_STPCPY = @HAVE_STPCPY@
-HAVE_STPNCPY = @HAVE_STPNCPY@
-HAVE_STRCASESTR = @HAVE_STRCASESTR@
-HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
-HAVE_STRPBRK = @HAVE_STRPBRK@
-HAVE_STRSEP = @HAVE_STRSEP@
-HAVE_STRTOD = @HAVE_STRTOD@
-HAVE_STRTOLL = @HAVE_STRTOLL@
-HAVE_STRTOULL = @HAVE_STRTOULL@
-HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
-HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
-HAVE_SYMLINK = @HAVE_SYMLINK@
-HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
-HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
-HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
-HAVE_UNISTD_H = @HAVE_UNISTD_H@
-HAVE_UNLINKAT = @HAVE_UNLINKAT@
-HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
-HAVE_USLEEP = @HAVE_USLEEP@
-HAVE_WCHAR_H = @HAVE_WCHAR_H@
-HAVE_WCHAR_T = @HAVE_WCHAR_T@
-HAVE_WCPCPY = @HAVE_WCPCPY@
-HAVE_WCPNCPY = @HAVE_WCPNCPY@
-HAVE_WCRTOMB = @HAVE_WCRTOMB@
-HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
-HAVE_WCSCAT = @HAVE_WCSCAT@
-HAVE_WCSCHR = @HAVE_WCSCHR@
-HAVE_WCSCMP = @HAVE_WCSCMP@
-HAVE_WCSCOLL = @HAVE_WCSCOLL@
-HAVE_WCSCPY = @HAVE_WCSCPY@
-HAVE_WCSCSPN = @HAVE_WCSCSPN@
-HAVE_WCSDUP = @HAVE_WCSDUP@
-HAVE_WCSLEN = @HAVE_WCSLEN@
-HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
-HAVE_WCSNCAT = @HAVE_WCSNCAT@
-HAVE_WCSNCMP = @HAVE_WCSNCMP@
-HAVE_WCSNCPY = @HAVE_WCSNCPY@
-HAVE_WCSNLEN = @HAVE_WCSNLEN@
-HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
-HAVE_WCSPBRK = @HAVE_WCSPBRK@
-HAVE_WCSRCHR = @HAVE_WCSRCHR@
-HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
-HAVE_WCSSPN = @HAVE_WCSSPN@
-HAVE_WCSSTR = @HAVE_WCSSTR@
-HAVE_WCSTOK = @HAVE_WCSTOK@
-HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
-HAVE_WCSXFRM = @HAVE_WCSXFRM@
-HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
-HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
-HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
-HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
-HAVE_WINT_T = @HAVE_WINT_T@
-HAVE_WMEMCHR = @HAVE_WMEMCHR@
-HAVE_WMEMCMP = @HAVE_WMEMCMP@
-HAVE_WMEMCPY = @HAVE_WMEMCPY@
-HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
-HAVE_WMEMSET = @HAVE_WMEMSET@
-HAVE__BOOL = @HAVE__BOOL@
-HAVE__EXIT = @HAVE__EXIT@
-HELP2MAN = @HELP2MAN@
-INCLUDE_NEXT = @INCLUDE_NEXT@
-INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBHELLO_LIBDEPS = @LIBHELLO_LIBDEPS@
-LIBHELLO_LTLIBDEPS = @LIBHELLO_LTLIBDEPS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
-LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
-LOCALE_JA = @LOCALE_JA@
-LOCALE_ZH_CN = @LOCALE_ZH_CN@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
-NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
-NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
-NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
-NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
-NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
-NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
-NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
-NEXT_ERRNO_H = @NEXT_ERRNO_H@
-NEXT_GETOPT_H = @NEXT_GETOPT_H@
-NEXT_STDDEF_H = @NEXT_STDDEF_H@
-NEXT_STDLIB_H = @NEXT_STDLIB_H@
-NEXT_STRING_H = @NEXT_STRING_H@
-NEXT_UNISTD_H = @NEXT_UNISTD_H@
-NEXT_WCHAR_H = @NEXT_WCHAR_H@
-NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
-PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
-RANLIB = @RANLIB@
-REPLACE_BTOWC = @REPLACE_BTOWC@
-REPLACE_CALLOC = @REPLACE_CALLOC@
-REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
-REPLACE_CHOWN = @REPLACE_CHOWN@
-REPLACE_CLOSE = @REPLACE_CLOSE@
-REPLACE_DUP = @REPLACE_DUP@
-REPLACE_DUP2 = @REPLACE_DUP2@
-REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
-REPLACE_GETCWD = @REPLACE_GETCWD@
-REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
-REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
-REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
-REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
-REPLACE_ISATTY = @REPLACE_ISATTY@
-REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
-REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
-REPLACE_LCHOWN = @REPLACE_LCHOWN@
-REPLACE_LINK = @REPLACE_LINK@
-REPLACE_LINKAT = @REPLACE_LINKAT@
-REPLACE_LSEEK = @REPLACE_LSEEK@
-REPLACE_MALLOC = @REPLACE_MALLOC@
-REPLACE_MBRLEN = @REPLACE_MBRLEN@
-REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
-REPLACE_MBSINIT = @REPLACE_MBSINIT@
-REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
-REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
-REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
-REPLACE_MBTOWC = @REPLACE_MBTOWC@
-REPLACE_MEMCHR = @REPLACE_MEMCHR@
-REPLACE_MEMMEM = @REPLACE_MEMMEM@
-REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
-REPLACE_NULL = @REPLACE_NULL@
-REPLACE_PREAD = @REPLACE_PREAD@
-REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
-REPLACE_PUTENV = @REPLACE_PUTENV@
-REPLACE_PWRITE = @REPLACE_PWRITE@
-REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
-REPLACE_READ = @REPLACE_READ@
-REPLACE_READLINK = @REPLACE_READLINK@
-REPLACE_REALLOC = @REPLACE_REALLOC@
-REPLACE_REALPATH = @REPLACE_REALPATH@
-REPLACE_RMDIR = @REPLACE_RMDIR@
-REPLACE_SETENV = @REPLACE_SETENV@
-REPLACE_SLEEP = @REPLACE_SLEEP@
-REPLACE_STPNCPY = @REPLACE_STPNCPY@
-REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
-REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
-REPLACE_STRDUP = @REPLACE_STRDUP@
-REPLACE_STRERROR = @REPLACE_STRERROR@
-REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
-REPLACE_STRNCAT = @REPLACE_STRNCAT@
-REPLACE_STRNDUP = @REPLACE_STRNDUP@
-REPLACE_STRNLEN = @REPLACE_STRNLEN@
-REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
-REPLACE_STRSTR = @REPLACE_STRSTR@
-REPLACE_STRTOD = @REPLACE_STRTOD@
-REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
-REPLACE_SYMLINK = @REPLACE_SYMLINK@
-REPLACE_TOWLOWER = @REPLACE_TOWLOWER@
-REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
-REPLACE_UNLINK = @REPLACE_UNLINK@
-REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
-REPLACE_UNSETENV = @REPLACE_UNSETENV@
-REPLACE_USLEEP = @REPLACE_USLEEP@
-REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
-REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
-REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
-REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
-REPLACE_WCTOB = @REPLACE_WCTOB@
-REPLACE_WCTOMB = @REPLACE_WCTOMB@
-REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
-REPLACE_WRITE = @REPLACE_WRITE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STDBOOL_H = @STDBOOL_H@
-STDDEF_H = @STDDEF_H@
-STRIP = @STRIP@
-UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
-UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
-UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gl_LIBOBJS = @gl_LIBOBJS@
-gl_LTLIBOBJS = @gl_LTLIBOBJS@
-gltests_LIBOBJS = @gltests_LIBOBJS@
-gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
-gltests_WITNESS = @gltests_WITNESS@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-lispdir = @lispdir@
-localedir = $(datadir)/locale
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-hello_SOURCES = hello.c system.h
-hello_LDADD = $(LIBINTL) $(top_builddir)/lib/lib$(PACKAGE).a
-AM_CPPFLAGS = -I$(top_srcdir)/lib -I$(top_builddir)/lib
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p; \
- then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-hello$(EXEEXT): $(hello_OBJECTS) $(hello_DEPENDENCIES) $(EXTRA_hello_DEPENDENCIES)
- @rm -f hello$(EXEEXT)
- $(LINK) $(hello_OBJECTS) $(hello_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hello.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- set x; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
- for dir in "$(DESTDIR)$(bindir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-binPROGRAMS \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
- uninstall-am uninstall-binPROGRAMS
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-/* hello.c -- print a greeting message and exit.
-
- Copyright 1992, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2005,
- 2006, 2007, 2008, 2010, 2011 Free Software Foundation, Inc.
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include <config.h>
-#include "system.h"
-#include "progname.h"
-
-static const struct option longopts[] =
-{
- { "greeting", required_argument, NULL, 'g' },
- { "help", no_argument, NULL, 'h' },
- { "next-generation", no_argument, NULL, 'n' },
- { "traditional", no_argument, NULL, 't' },
- { "version", no_argument, NULL, 'v' },
- { NULL, 0, NULL, 0 }
-};
-
-/* Different types of greetings; only one per invocation. */
-typedef enum {
- greet_gnu, greet_new, greet_traditional, greet_user
-} greeting_type;
-
-/* Forward declarations. */
-static void print_help (void);
-static void print_version (void);
-
-int
-main (int argc, char *argv[])
-{
- int optc;
- int lose = 0;
- const char *greeting_msg = NULL;
- greeting_type g = greet_gnu;
-
- set_program_name (argv[0]);
-
- /* Set locale via LC_ALL. */
- setlocale (LC_ALL, "");
-
-#if ENABLE_NLS
- /* Set the text message domain. */
- bindtextdomain (PACKAGE, LOCALEDIR);
- textdomain (PACKAGE);
-#endif
-
- /* Even exiting has subtleties. On exit, if any writes failed, change
- the exit status. The /dev/full device on GNU/Linux can be used for
- testing; for instance, hello >/dev/full should exit unsuccessfully.
- This is implemented in the Gnulib module "closeout". */
- atexit (close_stdout);
-
- while ((optc = getopt_long (argc, argv, "g:hntv", longopts, NULL)) != -1)
- switch (optc)
- {
- /* --help and --version exit immediately, per GNU coding standards. */
- case 'v':
- print_version ();
- exit (EXIT_SUCCESS);
- break;
- case 'g':
- greeting_msg = optarg;
- g = greet_user;
- break;
- case 'h':
- print_help ();
- exit (EXIT_SUCCESS);
- break;
- case 'n':
- g = greet_new;
- break;
- case 't':
- g = greet_traditional;
- break;
- default:
- lose = 1;
- break;
- }
-
- if (lose || optind < argc)
- {
- /* Print error message and exit. */
- if (optind < argc)
- fprintf (stderr, _("%s: extra operand: %s\n"),
- program_name, argv[optind]);
- fprintf (stderr, _("Try `%s --help' for more information.\n"),
- program_name);
- exit (EXIT_FAILURE);
- }
-
- /* Print greeting message and exit. */
- if (g == greet_traditional)
- printf (_("hello, world\n"));
-
- else if (g == greet_new)
- /* TRANSLATORS: Use box drawing characters or other fancy stuff
- if your encoding (e.g., UTF-8) allows it. If done so add the
- following note, please:
-
- [Note: For best viewing results use a UTF-8 locale, please.]
- */
- printf (_("\
-+---------------+\n\
-| Hello, world! |\n\
-+---------------+\n\
-"));
-
- else if (g == greet_user)
- puts (greeting_msg);
-
- else if (g == greet_gnu)
- puts (_("Hello, world!"));
-
- else {
- /* No need for this impossible message to be translated. */
- fprintf (stderr, "Impossible hello value %d\n", g);
- exit (EXIT_FAILURE);
- }
-
- exit (EXIT_SUCCESS);
-}
-
-
-\f
-/* Print help info. This long message is split into
- several pieces to help translators be able to align different
- blocks and identify the various pieces. */
-
-static void
-print_help (void)
-{
- /* TRANSLATORS: --help output 1 (synopsis)
- no-wrap */
- printf (_("\
-Usage: %s [OPTION]...\n"), program_name);
-
- /* TRANSLATORS: --help output 2 (brief description)
- no-wrap */
- fputs (_("\
-Print a friendly, customizable greeting.\n"), stdout);
-
- puts ("");
- /* TRANSLATORS: --help output 3: options 1/2
- no-wrap */
- fputs (_("\
- -h, --help display this help and exit\n\
- -v, --version display version information and exit\n"), stdout);
-
- puts ("");
- /* TRANSLATORS: --help output 4: options 2/2
- no-wrap */
- fputs (_("\
- -t, --traditional use traditional greeting format\n\
- -n, --next-generation use next-generation greeting format\n\
- -g, --greeting=TEXT use TEXT as the greeting message\n"), stdout);
-
- printf ("\n");
- /* TRANSLATORS: --help output 5+ (reports)
- TRANSLATORS: the placeholder indicates the bug-reporting address
- for this application. Please add _another line_ with the
- address for translation bugs.
- no-wrap */
- printf (_("\
-Report bugs to: %s\n"), PACKAGE_BUGREPORT);
-#ifdef PACKAGE_PACKAGER_BUG_REPORTS
- printf (_("Report %s bugs to: %s\n"), PACKAGE_PACKAGER,
- PACKAGE_PACKAGER_BUG_REPORTS);
-#endif
-#ifdef PACKAGE_URL
- printf (_("%s home page: <%s>\n"), PACKAGE_NAME, PACKAGE_URL);
-#else
- printf (_("%s home page: <http://www.gnu.org/software/%s/>\n"),
- PACKAGE_NAME, PACKAGE);
-#endif
- fputs (_("General help using GNU software: <http://www.gnu.org/gethelp/>\n"),
- stdout);
-}
-
-
-\f
-/* Print version and copyright information. */
-
-static void
-print_version (void)
-{
- printf ("hello (GNU %s) %s\n", PACKAGE, VERSION);
- /* xgettext: no-wrap */
- puts ("");
-
- /* It is important to separate the year from the rest of the message,
- as done here, to avoid having to retranslate the message when a new
- year comes around. */
- printf (_("\
-Copyright (C) %s Free Software Foundation, Inc.\n\
-License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\n\
-This is free software: you are free to change and redistribute it.\n\
-There is NO WARRANTY, to the extent permitted by law.\n"),
- "2011");
-}
+++ /dev/null
-/* system.h: system-dependent declarations; include this first.
-
- Copyright 1996, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef HELLO_SYSTEM_H
-#define HELLO_SYSTEM_H
-
-/* Assume ANSI C89 headers are available. */
-#include <locale.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-/* Use POSIX headers. If they are not available, we use the substitute
- provided by gnulib. */
-#include <getopt.h>
-#include <unistd.h>
-
-/* Internationalization. */
-#include "gettext.h"
-#define _(str) gettext (str)
-#define N_(str) gettext_noop (str)
-
-/* Check for errors on write. */
-#include "closeout.h"
-
-#endif /* HELLO_SYSTEM_H */
+++ /dev/null
-2008-11-28 Karl Berry <karl@tug.org>
-
- * Makefile.am (TESTS): add it.
- * last-1: new test.
-
-2006-08-23 Bruno Haible <bruno@clisp.org>
-
- * greeting-1: Remove locale setting. This test must work in all
- locales.
- * hello-1: Run the test in the C locale, not in the default locale.
- * traditional-1: Likewise.
-
-2006-08-22 Bruno Haible <bruno@clisp.org>
-
- * greeting-1: Remove also temporary subdirectories.
- * hello-1: Likewise.
- * traditional-1: Likewise.
-
-2006-08-22 Bruno Haible <bruno@clisp.org>
-
- * greeting-2: New file.
- * Makefile.am (TESTS): Add it.
-
-2006-08-13 Karl Berry <karl@gnu.org>
-
- * *-1: Simplify, change sailor test to arbitrary greeting.
-
-2001-03-23 Karl Eichwalder <keichwa@gmx.net>
-
- * Tests completely re-written (using gettext as an example).
- * Remove old files.
-
-Thu Jan 2 18:40:41 1997 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am (EXTRA_DIST): Add `hello.in'.
-
- * hello.in: Move `hello' to `hello.in'.
-
-Mon Dec 30 17:29:37 1996 Karl Eichwalder <ke@ke.Central.DE>
-
- * Makefile.am: New file.
- (EXTRA_DIST): Add `testdata'.
- (TESTS): Add `hello'.
-
- * hello: New file.
-
- * testdata: Copied from `../src/'.
-
-Copyright 1996, 1997, 2001, 2006, 2008 Free Software Foundation, Inc.
-
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
+++ /dev/null
-# Makefile for hello/tests.
-#
-# Copyright 1996, 2005, 2006, 2007, 2008, 2010 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-TESTS = greeting-1 greeting-2 hello-1 last-1 traditional-1
-
-EXTRA_DIST = $(TESTS)
-
-TESTS_ENVIRONMENT = top_srcdir=$(top_srcdir) PATH=.$(PATH_SEPARATOR)../src$(PATH_SEPARATOR)$$PATH \
- HELLO=`echo hello|sed '$(transform)'` \
- $(SHELL)
+++ /dev/null
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile for hello/tests.
-#
-# Copyright 1996, 2005, 2006, 2007, 2008, 2010 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = tests
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
- $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \
- $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/configmake.m4 \
- $(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \
- $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-o.m4 \
- $(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/getopt.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/gnulib-common.m4 \
- $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \
- $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
- $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/locale-fr.m4 \
- $(top_srcdir)/m4/locale-ja.m4 $(top_srcdir)/m4/locale-zh.m4 \
- $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbsinit.m4 \
- $(top_srcdir)/m4/mbstate_t.m4 $(top_srcdir)/m4/msvc-inval.m4 \
- $(top_srcdir)/m4/msvc-nothrow.m4 $(top_srcdir)/m4/nls.m4 \
- $(top_srcdir)/m4/nocrash.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/quotearg.m4 \
- $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdbool.m4 \
- $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \
- $(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
- $(top_srcdir)/m4/sys_socket_h.m4 $(top_srcdir)/m4/unistd_h.m4 \
- $(top_srcdir)/m4/warn-on-use.m4 $(top_srcdir)/m4/wchar_h.m4 \
- $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype_h.m4 \
- $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-pkglibexecdir = @pkglibexecdir@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-ARFLAGS = @ARFLAGS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CONFIG_INCLUDE = @CONFIG_INCLUDE@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
-EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
-ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
-ENOLINK_VALUE = @ENOLINK_VALUE@
-EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
-EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
-ERRNO_H = @ERRNO_H@
-EXEEXT = @EXEEXT@
-GETOPT_H = @GETOPT_H@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GNULIB_ATOLL = @GNULIB_ATOLL@
-GNULIB_BTOWC = @GNULIB_BTOWC@
-GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
-GNULIB_CANONICALIZE_FILE_NAME = @GNULIB_CANONICALIZE_FILE_NAME@
-GNULIB_CHDIR = @GNULIB_CHDIR@
-GNULIB_CHOWN = @GNULIB_CHOWN@
-GNULIB_CLOSE = @GNULIB_CLOSE@
-GNULIB_DUP = @GNULIB_DUP@
-GNULIB_DUP2 = @GNULIB_DUP2@
-GNULIB_DUP3 = @GNULIB_DUP3@
-GNULIB_ENVIRON = @GNULIB_ENVIRON@
-GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
-GNULIB_FACCESSAT = @GNULIB_FACCESSAT@
-GNULIB_FCHDIR = @GNULIB_FCHDIR@
-GNULIB_FCHOWNAT = @GNULIB_FCHOWNAT@
-GNULIB_FDATASYNC = @GNULIB_FDATASYNC@
-GNULIB_FFSL = @GNULIB_FFSL@
-GNULIB_FFSLL = @GNULIB_FFSLL@
-GNULIB_FSYNC = @GNULIB_FSYNC@
-GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
-GNULIB_GETCWD = @GNULIB_GETCWD@
-GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
-GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
-GNULIB_GETGROUPS = @GNULIB_GETGROUPS@
-GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
-GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
-GNULIB_GETLOGIN = @GNULIB_GETLOGIN@
-GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
-GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
-GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
-GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
-GNULIB_GL_UNISTD_H_GETOPT = @GNULIB_GL_UNISTD_H_GETOPT@
-GNULIB_GRANTPT = @GNULIB_GRANTPT@
-GNULIB_GROUP_MEMBER = @GNULIB_GROUP_MEMBER@
-GNULIB_ISATTY = @GNULIB_ISATTY@
-GNULIB_ISWBLANK = @GNULIB_ISWBLANK@
-GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@
-GNULIB_LCHOWN = @GNULIB_LCHOWN@
-GNULIB_LINK = @GNULIB_LINK@
-GNULIB_LINKAT = @GNULIB_LINKAT@
-GNULIB_LSEEK = @GNULIB_LSEEK@
-GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
-GNULIB_MBRLEN = @GNULIB_MBRLEN@
-GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
-GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
-GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
-GNULIB_MBSCHR = @GNULIB_MBSCHR@
-GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
-GNULIB_MBSINIT = @GNULIB_MBSINIT@
-GNULIB_MBSLEN = @GNULIB_MBSLEN@
-GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
-GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
-GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
-GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
-GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
-GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
-GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
-GNULIB_MBSSEP = @GNULIB_MBSSEP@
-GNULIB_MBSSPN = @GNULIB_MBSSPN@
-GNULIB_MBSSTR = @GNULIB_MBSSTR@
-GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
-GNULIB_MBTOWC = @GNULIB_MBTOWC@
-GNULIB_MEMCHR = @GNULIB_MEMCHR@
-GNULIB_MEMMEM = @GNULIB_MEMMEM@
-GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
-GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
-GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
-GNULIB_MKOSTEMP = @GNULIB_MKOSTEMP@
-GNULIB_MKOSTEMPS = @GNULIB_MKOSTEMPS@
-GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
-GNULIB_MKSTEMPS = @GNULIB_MKSTEMPS@
-GNULIB_PIPE = @GNULIB_PIPE@
-GNULIB_PIPE2 = @GNULIB_PIPE2@
-GNULIB_POSIX_OPENPT = @GNULIB_POSIX_OPENPT@
-GNULIB_PREAD = @GNULIB_PREAD@
-GNULIB_PTSNAME = @GNULIB_PTSNAME@
-GNULIB_PTSNAME_R = @GNULIB_PTSNAME_R@
-GNULIB_PUTENV = @GNULIB_PUTENV@
-GNULIB_PWRITE = @GNULIB_PWRITE@
-GNULIB_RANDOM = @GNULIB_RANDOM@
-GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
-GNULIB_RAWMEMCHR = @GNULIB_RAWMEMCHR@
-GNULIB_READ = @GNULIB_READ@
-GNULIB_READLINK = @GNULIB_READLINK@
-GNULIB_READLINKAT = @GNULIB_READLINKAT@
-GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
-GNULIB_REALPATH = @GNULIB_REALPATH@
-GNULIB_RMDIR = @GNULIB_RMDIR@
-GNULIB_RPMATCH = @GNULIB_RPMATCH@
-GNULIB_SETENV = @GNULIB_SETENV@
-GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
-GNULIB_SLEEP = @GNULIB_SLEEP@
-GNULIB_STPCPY = @GNULIB_STPCPY@
-GNULIB_STPNCPY = @GNULIB_STPNCPY@
-GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
-GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
-GNULIB_STRDUP = @GNULIB_STRDUP@
-GNULIB_STRERROR = @GNULIB_STRERROR@
-GNULIB_STRERROR_R = @GNULIB_STRERROR_R@
-GNULIB_STRNCAT = @GNULIB_STRNCAT@
-GNULIB_STRNDUP = @GNULIB_STRNDUP@
-GNULIB_STRNLEN = @GNULIB_STRNLEN@
-GNULIB_STRPBRK = @GNULIB_STRPBRK@
-GNULIB_STRSEP = @GNULIB_STRSEP@
-GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
-GNULIB_STRSTR = @GNULIB_STRSTR@
-GNULIB_STRTOD = @GNULIB_STRTOD@
-GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
-GNULIB_STRTOLL = @GNULIB_STRTOLL@
-GNULIB_STRTOULL = @GNULIB_STRTOULL@
-GNULIB_STRVERSCMP = @GNULIB_STRVERSCMP@
-GNULIB_SYMLINK = @GNULIB_SYMLINK@
-GNULIB_SYMLINKAT = @GNULIB_SYMLINKAT@
-GNULIB_SYSTEM_POSIX = @GNULIB_SYSTEM_POSIX@
-GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@
-GNULIB_TTYNAME_R = @GNULIB_TTYNAME_R@
-GNULIB_UNISTD_H_NONBLOCKING = @GNULIB_UNISTD_H_NONBLOCKING@
-GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
-GNULIB_UNLINK = @GNULIB_UNLINK@
-GNULIB_UNLINKAT = @GNULIB_UNLINKAT@
-GNULIB_UNLOCKPT = @GNULIB_UNLOCKPT@
-GNULIB_UNSETENV = @GNULIB_UNSETENV@
-GNULIB_USLEEP = @GNULIB_USLEEP@
-GNULIB_WCPCPY = @GNULIB_WCPCPY@
-GNULIB_WCPNCPY = @GNULIB_WCPNCPY@
-GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
-GNULIB_WCSCASECMP = @GNULIB_WCSCASECMP@
-GNULIB_WCSCAT = @GNULIB_WCSCAT@
-GNULIB_WCSCHR = @GNULIB_WCSCHR@
-GNULIB_WCSCMP = @GNULIB_WCSCMP@
-GNULIB_WCSCOLL = @GNULIB_WCSCOLL@
-GNULIB_WCSCPY = @GNULIB_WCSCPY@
-GNULIB_WCSCSPN = @GNULIB_WCSCSPN@
-GNULIB_WCSDUP = @GNULIB_WCSDUP@
-GNULIB_WCSLEN = @GNULIB_WCSLEN@
-GNULIB_WCSNCASECMP = @GNULIB_WCSNCASECMP@
-GNULIB_WCSNCAT = @GNULIB_WCSNCAT@
-GNULIB_WCSNCMP = @GNULIB_WCSNCMP@
-GNULIB_WCSNCPY = @GNULIB_WCSNCPY@
-GNULIB_WCSNLEN = @GNULIB_WCSNLEN@
-GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
-GNULIB_WCSPBRK = @GNULIB_WCSPBRK@
-GNULIB_WCSRCHR = @GNULIB_WCSRCHR@
-GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
-GNULIB_WCSSPN = @GNULIB_WCSSPN@
-GNULIB_WCSSTR = @GNULIB_WCSSTR@
-GNULIB_WCSTOK = @GNULIB_WCSTOK@
-GNULIB_WCSWIDTH = @GNULIB_WCSWIDTH@
-GNULIB_WCSXFRM = @GNULIB_WCSXFRM@
-GNULIB_WCTOB = @GNULIB_WCTOB@
-GNULIB_WCTOMB = @GNULIB_WCTOMB@
-GNULIB_WCTRANS = @GNULIB_WCTRANS@
-GNULIB_WCTYPE = @GNULIB_WCTYPE@
-GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
-GNULIB_WMEMCHR = @GNULIB_WMEMCHR@
-GNULIB_WMEMCMP = @GNULIB_WMEMCMP@
-GNULIB_WMEMCPY = @GNULIB_WMEMCPY@
-GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@
-GNULIB_WMEMSET = @GNULIB_WMEMSET@
-GNULIB_WRITE = @GNULIB_WRITE@
-GNULIB__EXIT = @GNULIB__EXIT@
-GREP = @GREP@
-HAVE_ATOLL = @HAVE_ATOLL@
-HAVE_BTOWC = @HAVE_BTOWC@
-HAVE_CANONICALIZE_FILE_NAME = @HAVE_CANONICALIZE_FILE_NAME@
-HAVE_CHOWN = @HAVE_CHOWN@
-HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
-HAVE_DECL_FCHDIR = @HAVE_DECL_FCHDIR@
-HAVE_DECL_FDATASYNC = @HAVE_DECL_FDATASYNC@
-HAVE_DECL_GETDOMAINNAME = @HAVE_DECL_GETDOMAINNAME@
-HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
-HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
-HAVE_DECL_GETPAGESIZE = @HAVE_DECL_GETPAGESIZE@
-HAVE_DECL_GETUSERSHELL = @HAVE_DECL_GETUSERSHELL@
-HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
-HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
-HAVE_DECL_SETENV = @HAVE_DECL_SETENV@
-HAVE_DECL_SETHOSTNAME = @HAVE_DECL_SETHOSTNAME@
-HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRERROR_R = @HAVE_DECL_STRERROR_R@
-HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
-HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
-HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
-HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
-HAVE_DECL_TTYNAME_R = @HAVE_DECL_TTYNAME_R@
-HAVE_DECL_UNSETENV = @HAVE_DECL_UNSETENV@
-HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
-HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
-HAVE_DUP2 = @HAVE_DUP2@
-HAVE_DUP3 = @HAVE_DUP3@
-HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
-HAVE_FACCESSAT = @HAVE_FACCESSAT@
-HAVE_FCHDIR = @HAVE_FCHDIR@
-HAVE_FCHOWNAT = @HAVE_FCHOWNAT@
-HAVE_FDATASYNC = @HAVE_FDATASYNC@
-HAVE_FEATURES_H = @HAVE_FEATURES_H@
-HAVE_FFSL = @HAVE_FFSL@
-HAVE_FFSLL = @HAVE_FFSLL@
-HAVE_FSYNC = @HAVE_FSYNC@
-HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
-HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
-HAVE_GETGROUPS = @HAVE_GETGROUPS@
-HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
-HAVE_GETLOGIN = @HAVE_GETLOGIN@
-HAVE_GETOPT_H = @HAVE_GETOPT_H@
-HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
-HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
-HAVE_GRANTPT = @HAVE_GRANTPT@
-HAVE_GROUP_MEMBER = @HAVE_GROUP_MEMBER@
-HAVE_ISWBLANK = @HAVE_ISWBLANK@
-HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
-HAVE_LCHOWN = @HAVE_LCHOWN@
-HAVE_LINK = @HAVE_LINK@
-HAVE_LINKAT = @HAVE_LINKAT@
-HAVE_MBRLEN = @HAVE_MBRLEN@
-HAVE_MBRTOWC = @HAVE_MBRTOWC@
-HAVE_MBSINIT = @HAVE_MBSINIT@
-HAVE_MBSLEN = @HAVE_MBSLEN@
-HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
-HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
-HAVE_MEMCHR = @HAVE_MEMCHR@
-HAVE_MEMPCPY = @HAVE_MEMPCPY@
-HAVE_MKDTEMP = @HAVE_MKDTEMP@
-HAVE_MKOSTEMP = @HAVE_MKOSTEMP@
-HAVE_MKOSTEMPS = @HAVE_MKOSTEMPS@
-HAVE_MKSTEMP = @HAVE_MKSTEMP@
-HAVE_MKSTEMPS = @HAVE_MKSTEMPS@
-HAVE_MSVC_INVALID_PARAMETER_HANDLER = @HAVE_MSVC_INVALID_PARAMETER_HANDLER@
-HAVE_OS_H = @HAVE_OS_H@
-HAVE_PIPE = @HAVE_PIPE@
-HAVE_PIPE2 = @HAVE_PIPE2@
-HAVE_POSIX_OPENPT = @HAVE_POSIX_OPENPT@
-HAVE_PREAD = @HAVE_PREAD@
-HAVE_PTSNAME = @HAVE_PTSNAME@
-HAVE_PTSNAME_R = @HAVE_PTSNAME_R@
-HAVE_PWRITE = @HAVE_PWRITE@
-HAVE_RANDOM = @HAVE_RANDOM@
-HAVE_RANDOM_H = @HAVE_RANDOM_H@
-HAVE_RANDOM_R = @HAVE_RANDOM_R@
-HAVE_RAWMEMCHR = @HAVE_RAWMEMCHR@
-HAVE_READLINK = @HAVE_READLINK@
-HAVE_READLINKAT = @HAVE_READLINKAT@
-HAVE_REALPATH = @HAVE_REALPATH@
-HAVE_RPMATCH = @HAVE_RPMATCH@
-HAVE_SETENV = @HAVE_SETENV@
-HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
-HAVE_SLEEP = @HAVE_SLEEP@
-HAVE_STPCPY = @HAVE_STPCPY@
-HAVE_STPNCPY = @HAVE_STPNCPY@
-HAVE_STRCASESTR = @HAVE_STRCASESTR@
-HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
-HAVE_STRPBRK = @HAVE_STRPBRK@
-HAVE_STRSEP = @HAVE_STRSEP@
-HAVE_STRTOD = @HAVE_STRTOD@
-HAVE_STRTOLL = @HAVE_STRTOLL@
-HAVE_STRTOULL = @HAVE_STRTOULL@
-HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
-HAVE_STRVERSCMP = @HAVE_STRVERSCMP@
-HAVE_SYMLINK = @HAVE_SYMLINK@
-HAVE_SYMLINKAT = @HAVE_SYMLINKAT@
-HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
-HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
-HAVE_UNISTD_H = @HAVE_UNISTD_H@
-HAVE_UNLINKAT = @HAVE_UNLINKAT@
-HAVE_UNLOCKPT = @HAVE_UNLOCKPT@
-HAVE_USLEEP = @HAVE_USLEEP@
-HAVE_WCHAR_H = @HAVE_WCHAR_H@
-HAVE_WCHAR_T = @HAVE_WCHAR_T@
-HAVE_WCPCPY = @HAVE_WCPCPY@
-HAVE_WCPNCPY = @HAVE_WCPNCPY@
-HAVE_WCRTOMB = @HAVE_WCRTOMB@
-HAVE_WCSCASECMP = @HAVE_WCSCASECMP@
-HAVE_WCSCAT = @HAVE_WCSCAT@
-HAVE_WCSCHR = @HAVE_WCSCHR@
-HAVE_WCSCMP = @HAVE_WCSCMP@
-HAVE_WCSCOLL = @HAVE_WCSCOLL@
-HAVE_WCSCPY = @HAVE_WCSCPY@
-HAVE_WCSCSPN = @HAVE_WCSCSPN@
-HAVE_WCSDUP = @HAVE_WCSDUP@
-HAVE_WCSLEN = @HAVE_WCSLEN@
-HAVE_WCSNCASECMP = @HAVE_WCSNCASECMP@
-HAVE_WCSNCAT = @HAVE_WCSNCAT@
-HAVE_WCSNCMP = @HAVE_WCSNCMP@
-HAVE_WCSNCPY = @HAVE_WCSNCPY@
-HAVE_WCSNLEN = @HAVE_WCSNLEN@
-HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
-HAVE_WCSPBRK = @HAVE_WCSPBRK@
-HAVE_WCSRCHR = @HAVE_WCSRCHR@
-HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
-HAVE_WCSSPN = @HAVE_WCSSPN@
-HAVE_WCSSTR = @HAVE_WCSSTR@
-HAVE_WCSTOK = @HAVE_WCSTOK@
-HAVE_WCSWIDTH = @HAVE_WCSWIDTH@
-HAVE_WCSXFRM = @HAVE_WCSXFRM@
-HAVE_WCTRANS_T = @HAVE_WCTRANS_T@
-HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
-HAVE_WCTYPE_T = @HAVE_WCTYPE_T@
-HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
-HAVE_WINT_T = @HAVE_WINT_T@
-HAVE_WMEMCHR = @HAVE_WMEMCHR@
-HAVE_WMEMCMP = @HAVE_WMEMCMP@
-HAVE_WMEMCPY = @HAVE_WMEMCPY@
-HAVE_WMEMMOVE = @HAVE_WMEMMOVE@
-HAVE_WMEMSET = @HAVE_WMEMSET@
-HAVE__BOOL = @HAVE__BOOL@
-HAVE__EXIT = @HAVE__EXIT@
-HELP2MAN = @HELP2MAN@
-INCLUDE_NEXT = @INCLUDE_NEXT@
-INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBHELLO_LIBDEPS = @LIBHELLO_LIBDEPS@
-LIBHELLO_LTLIBDEPS = @LIBHELLO_LTLIBDEPS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
-LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
-LOCALE_JA = @LOCALE_JA@
-LOCALE_ZH_CN = @LOCALE_ZH_CN@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = @NEXT_AS_FIRST_DIRECTIVE_ERRNO_H@
-NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = @NEXT_AS_FIRST_DIRECTIVE_GETOPT_H@
-NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@
-NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = @NEXT_AS_FIRST_DIRECTIVE_STDLIB_H@
-NEXT_AS_FIRST_DIRECTIVE_STRING_H = @NEXT_AS_FIRST_DIRECTIVE_STRING_H@
-NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = @NEXT_AS_FIRST_DIRECTIVE_UNISTD_H@
-NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@
-NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@
-NEXT_ERRNO_H = @NEXT_ERRNO_H@
-NEXT_GETOPT_H = @NEXT_GETOPT_H@
-NEXT_STDDEF_H = @NEXT_STDDEF_H@
-NEXT_STDLIB_H = @NEXT_STDLIB_H@
-NEXT_STRING_H = @NEXT_STRING_H@
-NEXT_UNISTD_H = @NEXT_UNISTD_H@
-NEXT_WCHAR_H = @NEXT_WCHAR_H@
-NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
-PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
-RANLIB = @RANLIB@
-REPLACE_BTOWC = @REPLACE_BTOWC@
-REPLACE_CALLOC = @REPLACE_CALLOC@
-REPLACE_CANONICALIZE_FILE_NAME = @REPLACE_CANONICALIZE_FILE_NAME@
-REPLACE_CHOWN = @REPLACE_CHOWN@
-REPLACE_CLOSE = @REPLACE_CLOSE@
-REPLACE_DUP = @REPLACE_DUP@
-REPLACE_DUP2 = @REPLACE_DUP2@
-REPLACE_FCHOWNAT = @REPLACE_FCHOWNAT@
-REPLACE_GETCWD = @REPLACE_GETCWD@
-REPLACE_GETDOMAINNAME = @REPLACE_GETDOMAINNAME@
-REPLACE_GETGROUPS = @REPLACE_GETGROUPS@
-REPLACE_GETLOGIN_R = @REPLACE_GETLOGIN_R@
-REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
-REPLACE_ISATTY = @REPLACE_ISATTY@
-REPLACE_ISWBLANK = @REPLACE_ISWBLANK@
-REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
-REPLACE_LCHOWN = @REPLACE_LCHOWN@
-REPLACE_LINK = @REPLACE_LINK@
-REPLACE_LINKAT = @REPLACE_LINKAT@
-REPLACE_LSEEK = @REPLACE_LSEEK@
-REPLACE_MALLOC = @REPLACE_MALLOC@
-REPLACE_MBRLEN = @REPLACE_MBRLEN@
-REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
-REPLACE_MBSINIT = @REPLACE_MBSINIT@
-REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
-REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
-REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
-REPLACE_MBTOWC = @REPLACE_MBTOWC@
-REPLACE_MEMCHR = @REPLACE_MEMCHR@
-REPLACE_MEMMEM = @REPLACE_MEMMEM@
-REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
-REPLACE_NULL = @REPLACE_NULL@
-REPLACE_PREAD = @REPLACE_PREAD@
-REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
-REPLACE_PUTENV = @REPLACE_PUTENV@
-REPLACE_PWRITE = @REPLACE_PWRITE@
-REPLACE_RANDOM_R = @REPLACE_RANDOM_R@
-REPLACE_READ = @REPLACE_READ@
-REPLACE_READLINK = @REPLACE_READLINK@
-REPLACE_REALLOC = @REPLACE_REALLOC@
-REPLACE_REALPATH = @REPLACE_REALPATH@
-REPLACE_RMDIR = @REPLACE_RMDIR@
-REPLACE_SETENV = @REPLACE_SETENV@
-REPLACE_SLEEP = @REPLACE_SLEEP@
-REPLACE_STPNCPY = @REPLACE_STPNCPY@
-REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
-REPLACE_STRCHRNUL = @REPLACE_STRCHRNUL@
-REPLACE_STRDUP = @REPLACE_STRDUP@
-REPLACE_STRERROR = @REPLACE_STRERROR@
-REPLACE_STRERROR_R = @REPLACE_STRERROR_R@
-REPLACE_STRNCAT = @REPLACE_STRNCAT@
-REPLACE_STRNDUP = @REPLACE_STRNDUP@
-REPLACE_STRNLEN = @REPLACE_STRNLEN@
-REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
-REPLACE_STRSTR = @REPLACE_STRSTR@
-REPLACE_STRTOD = @REPLACE_STRTOD@
-REPLACE_STRTOK_R = @REPLACE_STRTOK_R@
-REPLACE_SYMLINK = @REPLACE_SYMLINK@
-REPLACE_TOWLOWER = @REPLACE_TOWLOWER@
-REPLACE_TTYNAME_R = @REPLACE_TTYNAME_R@
-REPLACE_UNLINK = @REPLACE_UNLINK@
-REPLACE_UNLINKAT = @REPLACE_UNLINKAT@
-REPLACE_UNSETENV = @REPLACE_UNSETENV@
-REPLACE_USLEEP = @REPLACE_USLEEP@
-REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
-REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@
-REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
-REPLACE_WCSWIDTH = @REPLACE_WCSWIDTH@
-REPLACE_WCTOB = @REPLACE_WCTOB@
-REPLACE_WCTOMB = @REPLACE_WCTOMB@
-REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
-REPLACE_WRITE = @REPLACE_WRITE@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STDBOOL_H = @STDBOOL_H@
-STDDEF_H = @STDDEF_H@
-STRIP = @STRIP@
-UNDEFINE_STRTOK_R = @UNDEFINE_STRTOK_R@
-UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
-UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = @UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gl_LIBOBJS = @gl_LIBOBJS@
-gl_LTLIBOBJS = @gl_LTLIBOBJS@
-gltests_LIBOBJS = @gltests_LIBOBJS@
-gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
-gltests_WITNESS = @gltests_WITNESS@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-lispdir = @lispdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-TESTS = greeting-1 greeting-2 hello-1 last-1 traditional-1
-EXTRA_DIST = $(TESTS)
-TESTS_ENVIRONMENT = top_srcdir=$(top_srcdir) PATH=.$(PATH_SEPARATOR)../src$(PATH_SEPARATOR)$$PATH \
- HELLO=`echo hello|sed '$(transform)'` \
- $(SHELL)
-
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnu tests/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-check-TESTS: $(TESTS)
- @failed=0; all=0; xfail=0; xpass=0; skip=0; \
- srcdir=$(srcdir); export srcdir; \
- list=' $(TESTS) '; \
- $(am__tty_colors); \
- if test -n "$$list"; then \
- for tst in $$list; do \
- if test -f ./$$tst; then dir=./; \
- elif test -f $$tst; then dir=; \
- else dir="$(srcdir)/"; fi; \
- if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *[\ \ ]$$tst[\ \ ]*) \
- xpass=`expr $$xpass + 1`; \
- failed=`expr $$failed + 1`; \
- col=$$red; res=XPASS; \
- ;; \
- *) \
- col=$$grn; res=PASS; \
- ;; \
- esac; \
- elif test $$? -ne 77; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *[\ \ ]$$tst[\ \ ]*) \
- xfail=`expr $$xfail + 1`; \
- col=$$lgn; res=XFAIL; \
- ;; \
- *) \
- failed=`expr $$failed + 1`; \
- col=$$red; res=FAIL; \
- ;; \
- esac; \
- else \
- skip=`expr $$skip + 1`; \
- col=$$blu; res=SKIP; \
- fi; \
- echo "$${col}$$res$${std}: $$tst"; \
- done; \
- if test "$$all" -eq 1; then \
- tests="test"; \
- All=""; \
- else \
- tests="tests"; \
- All="All "; \
- fi; \
- if test "$$failed" -eq 0; then \
- if test "$$xfail" -eq 0; then \
- banner="$$All$$all $$tests passed"; \
- else \
- if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
- banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
- fi; \
- else \
- if test "$$xpass" -eq 0; then \
- banner="$$failed of $$all $$tests failed"; \
- else \
- if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
- banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
- fi; \
- fi; \
- dashes="$$banner"; \
- skipped=""; \
- if test "$$skip" -ne 0; then \
- if test "$$skip" -eq 1; then \
- skipped="($$skip test was not run)"; \
- else \
- skipped="($$skip tests were not run)"; \
- fi; \
- test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
- dashes="$$skipped"; \
- fi; \
- report=""; \
- if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
- report="Please report to $(PACKAGE_BUGREPORT)"; \
- test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
- dashes="$$report"; \
- fi; \
- dashes=`echo "$$dashes" | sed s/./=/g`; \
- if test "$$failed" -eq 0; then \
- col="$$grn"; \
- else \
- col="$$red"; \
- fi; \
- echo "$${col}$$dashes$${std}"; \
- echo "$${col}$$banner$${std}"; \
- test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \
- test -z "$$report" || echo "$${col}$$report$${std}"; \
- echo "$${col}$$dashes$${std}"; \
- test "$$failed" -eq 0; \
- else :; fi
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am check check-TESTS check-am clean clean-generic \
- distclean distclean-generic distdir dvi dvi-am html html-am \
- info info-am install install-am install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
- uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#! /bin/sh
-# Test arbitrary --greeting.
-#
-# Copyright (C) 2001, 2006 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-trap 'rm -fr $tmpfiles' 1 2 3 15
-
-# No locale settings in this test, since we are using a fixed string;
-# nothing in the output should be locale-dependent.
-
-tmpfiles="greeting-test1.ok"
-cat <<EOF >greeting-test1.ok
-Nothing happens here.
-EOF
-
-tmpfiles="$tmpfiles greeting-test1.out"
-: ${HELLO=hello}
-${HELLO} -g 'Nothing happens here.' | tr -d '\r' >greeting-test1.out
-
-# remove \r (CR) characters from the output, so that the tests work on
-# platforms with CRLF line endings. There is apparently no reliable
-# method (across Cygwin, MingW, etc.) to force an eol style.
-
-: ${DIFF=diff}
-${DIFF} greeting-test1.ok greeting-test1.out
-result=$?
-
-rm -fr $tmpfiles
-
-exit $result
+++ /dev/null
-#! /bin/sh
-# Test very long --greeting argument, and also show skipping a test.
-# (And one way to compute full moons.)
-#
-# Copyright (C) 2001, 2006 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-trap 'rm -fr $tmpfiles' 1 2 3 15
-
-tmpfiles="greeting-test2.ok"
-cat <<EOF > greeting-test2.ok
-Wuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuhhh!
-EOF
-
-# Werewolves cry at full moon only.
-set - `TZ=GMT date +"%Y %j %H %M %S"`
-year=$1; day=$2; hours=$3; minutes=$4; seconds=$5
-years_since_2000=`expr $year - 2000`
-days_since_2000=`expr '(' $years_since_2000 '*' 365 ')' + '(' '(' $years_since_2000 - 1 ')' / 4 ')' + $day`
-seconds_since_2000=`expr '(' '(' '(' '(' '(' $days_since_2000 '*' 24 ')' + $hours ')' '*' 60 ')' + $minutes ')' '*' 60 ')' + $seconds`
-# A moon period is ca. 2551442.8 seconds.
-remainder=`expr $seconds_since_2000 % 2551443`
-# Full moon is around remainder = 1760000, oscillating between ca. 1720000
-# and ca. 1805000. Allow a tolerance of +/- 24 h.
-if test `expr $remainder '>' 1650000` = 0 || test `expr $remainder '<' 1890000` = 0; then
- { echo "$0: Skipping test: not a full moon night"; rm -fr $tmpfiles; exit 77; }
-fi
-
-# The exit 77 is the magic value which tells Automake's `make check'
-# that this test was skipped. It's also good to give a
-# human-understandable reason why the test was skipped, so the person
-# running the test can know.
-
-tmpfiles="$tmpfiles greeting-test2.out"
-: ${HELLO=hello}
-${HELLO} -g 'Wuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuhhh!' \
-| tr -d '\r' >greeting-test2.out
-
-: ${DIFF=diff}
-${DIFF} greeting-test2.ok greeting-test2.out
-result=$?
-
-rm -fr $tmpfiles
-
-exit $result
+++ /dev/null
-#! /bin/sh
-# Test standard GNU greeting.
-#
-# Copyright (C) 2001, 2006 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-# This script takes one argument.
-
-trap 'rm -fr $tmpfiles' 1 2 3 15
-
-# We force the C locale here, since we are checking normal output,
-# which will be translated.
-
-LANGUAGE=
-LC_ALL=C
-LC_MESSAGES=
-LANG=
-export LANGUAGE LC_ALL LC_MESSAGES LANG
-
-tmpfiles="hello-test1.ok"
-cat <<EOF > hello-test1.ok
-Hello, world!
-EOF
-
-tmpfiles="$tmpfiles hello-test1.out"
-: ${HELLO=hello}
-${HELLO} | tr -d '\r' >hello-test1.out
-
-: ${DIFF=diff}
-${DIFF} hello-test1.ok hello-test1.out
-result=$?
-
-rm -fr $tmpfiles
-
-exit $result
+++ /dev/null
-#! /bin/sh
-# Test that last greeting option specified is what counts.
-#
-# Copyright 2008 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-# This script takes one argument.
-
-trap 'rm -fr $tmpfiles' 1 2 3 15
-
-# We force the C locale here, since we are checking normal output,
-# which will be translated.
-
-LANGUAGE=
-LC_ALL=C
-LC_MESSAGES=
-LANG=
-export LANGUAGE LC_ALL LC_MESSAGES LANG
-
-tmpfiles="last-test1.ok"
-cat <<EOF > last-test1.ok
-my hello
-EOF
-
-tmpfiles="$tmpfiles last-test1.out"
-: ${HELLO=hello}
-${HELLO} -t -n -g 'my hello' | tr -d '\r' \
-| tr -d '\r' >last-test1.out
-
-: ${DIFF=diff}
-${DIFF} last-test1.ok last-test1.out
-result=$?
-
-rm -fr $tmpfiles
-
-exit $result
+++ /dev/null
-#! /bin/sh
-# Test traditional greeting.
-#
-# Copyright (C) 2001, 2006 Free Software Foundation, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved.
-
-trap 'rm -fr $tmpfiles' 1 2 3 15
-
-# We force the C locale here, since we are checking normal output,
-# which will be translated.
-
-LANGUAGE=
-LC_ALL=C
-LC_MESSAGES=
-LANG=
-export LANGUAGE LC_ALL LC_MESSAGES LANG
-
-tmpfiles="traditional-test1.ok"
-cat <<EOF > traditional-test1.ok
-hello, world
-EOF
-
-tmpfiles="$tmpfiles traditional-test1.out"
-: ${HELLO=hello}
-${HELLO} --traditional | tr -d '\r' >traditional-test1.out
-
-: ${DIFF=diff}
-${DIFF} traditional-test1.ok traditional-test1.out
-result=$?
-
-rm -fr $tmpfiles
-
-exit $result
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<manifest>
+ <!--<remote fetch="ssh://review.tizen.org" name="tizen-gerrit" review="https://review.tizen.org/gerrit"/>
+ <default remote="tizen-gerrit"/>-->
+
+<project name="apps/native/bluetooth-share-ui" />
+<project name="apps/native/boot-animation" />
+<project name="apps/native/menu-screen" />
+<project name="apps/native/starter" />
+<project name="apps/native/ug-bluetooth-efl" />
+<project name="apps/native/ug-mobile-ap" />
+<project name="apps/native/ug-nfc-efl" />
+<project name="apps/native/ug-wifi-direct" />
+<project name="apps/native/ug-wifi-efl" />
+<project name="apps/native/volume-app" />
+<project name="apps/web/download-manager" />
+</manifest>