Tune effect of motion on KF/GF boost in two pass;

This code adjust the impact of the amount and speed of motion
on GF and KF boost.

Sections with lots of slow motion will tend to have a
somewhat bigger boost and sections with fast motion may
have less.

There is a knock on effect to the selection of the active
quantizer range.

This will likely require further tuning but helps with a couple
of particularly bad edge cases.

Change-Id: Ic2449cda7305672b69acf42fc0a845b77ac98d40

diff --git a/vp8/encoder/firstpass.c b/vp8/encoder/firstpass.c
index 0a6e8c5..13633e9 100644 (file)
--- a/vp8/encoder/firstpass.c
+++ b/vp8/encoder/firstpass.c
@@ -1218,10 +1218,7 @@ static void define_gf_group(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
 
     double mv_accumulator_rabs  = 0.0;
     double mv_accumulator_cabs  = 0.0;
-    double this_mv_rabs;
-    double this_mv_cabs;
     double mv_ratio_accumulator = 0.0;
-    double distance_factor = 0.0;
     double decay_accumulator = 1.0;
 
     double boost_factor = IIFACTOR;
@@ -1270,9 +1267,10 @@ static void define_gf_group(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
     while (((i < cpi->max_gf_interval) || ((cpi->frames_to_key - i) < MIN_GF_INTERVAL)) && (i < cpi->frames_to_key))
     {
         double r;
-        double motion_factor;
         double this_frame_mvr_ratio;
         double this_frame_mvc_ratio;
+        double motion_decay;
+        double motion_pct = next_frame.pcnt_motion;
 
         i++;                                                    // Increment the loop counter
 
@@ -1287,12 +1285,8 @@ static void define_gf_group(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
             break;
 
         // Accumulate motion stats.
-        motion_factor = next_frame.pcnt_motion;
-        this_mv_rabs = fabs(next_frame.mvr_abs * motion_factor);
-        this_mv_cabs = fabs(next_frame.mvc_abs * motion_factor);
-
-        mv_accumulator_rabs += fabs(next_frame.mvr_abs * motion_factor);
-        mv_accumulator_cabs += fabs(next_frame.mvc_abs * motion_factor);
+        mv_accumulator_rabs += fabs(next_frame.mvr_abs * motion_pct);
+        mv_accumulator_cabs += fabs(next_frame.mvc_abs * motion_pct);
 
         //Accumulate Motion In/Out of frame stats
         this_frame_mv_in_out = next_frame.mv_in_out_count * next_frame.pcnt_motion;
@@ -1300,13 +1294,23 @@ static void define_gf_group(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
         abs_mv_in_out_accumulator += fabs(next_frame.mv_in_out_count * next_frame.pcnt_motion);
 
         // If there is a significant amount of motion
-        if (motion_factor > 0.05)
+        if (motion_pct > 0.05)
         {
-            this_frame_mvr_ratio = fabs(next_frame.mvr_abs) / DOUBLE_DIVIDE_CHECK(fabs(next_frame.MVr));
-            this_frame_mvc_ratio = fabs(next_frame.mvc_abs) / DOUBLE_DIVIDE_CHECK(fabs(next_frame.MVc));
+            this_frame_mvr_ratio = fabs(next_frame.mvr_abs) /
+                                   DOUBLE_DIVIDE_CHECK(fabs(next_frame.MVr));
+
+            this_frame_mvc_ratio = fabs(next_frame.mvc_abs) /
+                                   DOUBLE_DIVIDE_CHECK(fabs(next_frame.MVc));
+
+            mv_ratio_accumulator +=
+                (this_frame_mvr_ratio < next_frame.mvr_abs)
+                    ? (this_frame_mvr_ratio * motion_pct)
+                    : next_frame.mvr_abs * motion_pct;
 
-            mv_ratio_accumulator += (this_frame_mvr_ratio < next_frame.mvr_abs) ? (this_frame_mvr_ratio * motion_factor) : next_frame.mvr_abs * motion_factor;
-            mv_ratio_accumulator += (this_frame_mvc_ratio < next_frame.mvc_abs) ? (this_frame_mvc_ratio * motion_factor) : next_frame.mvc_abs * motion_factor;
+            mv_ratio_accumulator +=
+                (this_frame_mvc_ratio < next_frame.mvc_abs)
+                    ? (this_frame_mvc_ratio * motion_pct)
+                    : next_frame.mvc_abs * motion_pct;
         }
         else
         {
@@ -1334,14 +1338,26 @@ static void define_gf_group(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
         loop_decay_rate = next_frame.pcnt_inter;
 
         // High % motion -> somewhat higher decay rate
-        if ((1.0 - (next_frame.pcnt_motion / 10.0)) < loop_decay_rate)
-            loop_decay_rate = (1.0 - (next_frame.pcnt_motion / 10.0));
+        motion_decay = (1.0 - (motion_pct / 20.0));
+        if (motion_decay < loop_decay_rate)
+            loop_decay_rate = motion_decay;
 
-        distance_factor = sqrt((this_mv_rabs * this_mv_rabs) + (this_mv_cabs * this_mv_cabs)) / 300.0;
-        distance_factor = ((distance_factor > 1.0) ? 0.0 : (1.0 - distance_factor));
-
-        if (distance_factor < loop_decay_rate)
-            loop_decay_rate = distance_factor;
+        // Adjustment to decay rate based on speed of motion
+        {
+            double this_mv_rabs;
+            double this_mv_cabs;
+            double distance_factor;
+
+            this_mv_rabs = fabs(next_frame.mvr_abs * motion_pct);
+            this_mv_cabs = fabs(next_frame.mvc_abs * motion_pct);
+
+            distance_factor = sqrt((this_mv_rabs * this_mv_rabs) +
+                                   (this_mv_cabs * this_mv_cabs)) / 250.0;
+            distance_factor = ((distance_factor > 1.0)
+                                    ? 0.0 : (1.0 - distance_factor));
+            if (distance_factor < loop_decay_rate)
+                loop_decay_rate = distance_factor;
+        }
 
         // Cumulative effect of decay
         decay_accumulator = decay_accumulator * loop_decay_rate;
@@ -2281,6 +2297,8 @@ void vp8_find_next_key_frame(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
     for (i = 0 ; i < cpi->frames_to_key ; i++)
     {
         double r;
+        double motion_decay;
+        double motion_pct = next_frame.pcnt_motion;
 
         if (EOF == vp8_input_stats(cpi, &next_frame))
             break;
@@ -2294,10 +2312,30 @@ void vp8_find_next_key_frame(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
         //if ( next_frame.pcnt_inter < loop_decay_rate )
         loop_decay_rate = next_frame.pcnt_inter;
 
-        if ((1.0 - (next_frame.pcnt_motion / 10.0)) < loop_decay_rate)
-            loop_decay_rate = (1.0 - (next_frame.pcnt_motion / 10.0));
+        // High % motion -> somewhat higher decay rate
+        motion_decay = (1.0 - (motion_pct / 20.0));
+        if (motion_decay < loop_decay_rate)
+            loop_decay_rate = motion_decay;
+
+        // Adjustment to decay rate based on speed of motion
+        {
+            double this_mv_rabs;
+            double this_mv_cabs;
+            double distance_factor;
+
+            this_mv_rabs = fabs(next_frame.mvr_abs * motion_pct);
+            this_mv_cabs = fabs(next_frame.mvc_abs * motion_pct);
+
+            distance_factor = sqrt((this_mv_rabs * this_mv_rabs) +
+                                   (this_mv_cabs * this_mv_cabs)) / 250.0;
+            distance_factor = ((distance_factor > 1.0)
+                                    ? 0.0 : (1.0 - distance_factor));
+            if (distance_factor < loop_decay_rate)
+                loop_decay_rate = distance_factor;
+        }
 
         decay_accumulator = decay_accumulator * loop_decay_rate;
+        decay_accumulator = decay_accumulator < 0.1 ? 0.1 : decay_accumulator;
 
         boost_score += (decay_accumulator * r);
 

diff --git a/vp8/encoder/onyx_if.c b/vp8/encoder/onyx_if.c
index 46c283d..6b7333f 100644 (file)
--- a/vp8/encoder/onyx_if.c
+++ b/vp8/encoder/onyx_if.c
@@ -4247,7 +4247,7 @@ static void encode_frame_to_data_rate
                 if (cpi->avg_frame_qindex < cpi->active_worst_quality)
                     Q = cpi->avg_frame_qindex;
 
-                if ( cpi->gfu_boost > 1000 )
+               if ( cpi->gfu_boost > 1000 )
                     cpi->active_best_quality = gf_low_motion_minq[Q];
                 else if ( cpi->gfu_boost < 400 )
                     cpi->active_best_quality = gf_high_motion_minq[Q];
@@ -4265,7 +4265,7 @@ static void encode_frame_to_data_rate
            // KEY FRAMES
            else
            {
-               if (cpi->gfu_boost > 1000)
+               if (cpi->gfu_boost > 600)
                    cpi->active_best_quality = kf_low_motion_minq[Q];
                else
                    cpi->active_best_quality = kf_high_motion_minq[Q];