dts: tm2/tm2e: remove te-gpios property from panel node

Since DECON uses HW-TRIGGER it does not need TE interrupt. Exynos-DSI driver
will not register this interrupt if the property is not present.

Change-Id: I15097fed7cdcdabf8f825c3b170eb625966fcacc
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index 92ebdd70fdcb3a029e02493d8fb067626acb357d..52dd6c4e1dd54977167213f628b21785028303dc 100644 (file)
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -1228,7 +1228,6 @@
                vci-supply = <&ldo28_reg>;
                reset-gpios = <&gpg0 0 0>;
                panel-en-gpios = <&gpf1 5 0>;
-               te-gpios = <&gpf1 3 1>;
                power-on-delay= <5>;
                init-delay = <120>;
                panel-width-mm = <71>;

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index a1de5b2a18338eb755dbde768635c3eba98ac7d8..b7ccb6eeeaab181f1da3893ca1769d932cc3135a 100644 (file)
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -1214,7 +1214,6 @@
                vci-supply = <&ldo28_reg>;
                reset-gpios = <&gpg0 0 0>;
                panel-en-gpios = <&gpf1 5 0>;
-               te-gpios = <&gpf1 3 1>;
                power-on-delay= <5>;
                init-delay = <120>;
                panel-width-mm = <71>;